id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
ajst-2931	Wu, Shenghong; Yu, Li; Zhao, Chenlei	Effect of Cooling Parameters on Cutting Vibration of Milling GH4169	2022	4	.pdf	application/pdf	1749	101	51	According to the results of multiple milling experiments, and considering factors such as surface roughness, tool wear and tool vibration, the milling parameters such as cutting speed, milling depth, and feed per tooth are set as fixed values. When the oil flow rate is greater than 140ml/h and less than 200ml/h, the axial vibration amplitude gradually increases with the increase of oil flow rate, but the radial vibration amplitude starts to decrease, which may be due to the reduction of tool wear leading to the reduction of radial vibration; When the oil flow is greater than 200ml/h, the axial vibration amplitude is inversely proportional to the increase of oil flow, while the radial vibration is proportional to the increase of oil flow.	cache/ajst-2931.pdf	txt/ajst-2931.txt