Template for an Acta IMEKO event paper


ACTA IMEKO 
ISSN: 2221-870X 
June 2018, Volume 7, Number 2, 60 

 

ACTA IMEKO | www.imeko.org June 2018 | Volume 7 | Number 2 | 60 

Editorial to selected papers from the IMEKO TC21 Conference 
AMCTM 2017 
Franco Pavese 

TC21 Chair, IMEKO, Torino, Italy 

 

Section: EDITORIAL 

Citation: Franco Pavese, Editorial to selected papers from the IMEKO TC21 Conference AMCTM 2017, Acta IMEKO, vol. 7, no. 2, article 10, June 2018, 
identifier: IMEKO-ACTA-07 (2018)-02-10 

Editor: Dušan Agrež, University of LJUBLJANA, Slovenia 

Received June 22, 2018; In final form June 22, 2018; Published June 2018 

Copyright: © 2018 IMEKO. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 License, which permits 
unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited 

Corresponding author: Franco Pavese, email: frpavese@gmail.com 

 

Dear Reader, 

this Special Issue includes five papers, originating from 
subject matters presented at the IMEKO TC21 International 
Conference AMCTM 2017 held in Glasgow in 2017 and 
selected for publication in ACTA IMEKO. 

The initial paper is a review about how knowledge is gained 
progressively and about where, in this process, the inter-
comparisons are an essential step. 

The paper of Shestakov is an ample review of the viewpoint 
of a Russian major University about dynamic measurement. 

The paper of Miller et al. concerns a problem in Large-
Volume    Metrology    (LVM)     manufacturing,     where    the  

 
 

uncertainty must be evaluated in the frame of optical-based 
metrology.  

The paper of Franceschini and Maisano illustrates, also in the 
frame of LVM systems, a new mathematical/statistical model 
for the real-time localization of the probe.  

The paper of Shestakov et al. proposes basic ideas for the 
mathematical modelling of optimal dynamic measurements, the 
key issue being the construction of a mathematical model of the 
measuring transducer. 

Franco Pavese 

 IMEKO TC21, Chair 

 


	Editorial to selected papers from the IMEKO TC21 Conference AMCTM 2017