id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
ap-5715	Daniyan, Ilesanmi; Tlhabadira, Isaac; Mpofu, Khumbulani; Adeodu, Adefemi	DEVELOPMENT OF NUMERICAL MODELS FOR THE PREDICTION OF TEMPERATURE AND SURFACE ROUGHNESS DURING THE MACHINING OPERATION OF TITANIUM ALLOY (Ti6Al4V)	2020	21	.pdf	application/pdf	9802	548	57	The feasible combinations of these process parameters produced 41 experimental trials whose response (surface roughness and temperature) were determined via the physical experimentations. For the three input data parameters employed for this study (the feed rate, spindle speed and the cut- ting velocity), the number of the neurons in the hid- den layer was obtained as ten and the corresponding number of the output layer and expected output pa- rameters was three (depth of cut, surface roughness and temperature) as shown in Figure 4.	cache/ap-5715.pdf	txt/ap-5715.txt