id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
ijassa-453	Wang, Tongyue; He, Ning; Li, Liang; Liu, Dahu	The Stability of Milling of Thin-walled Workpiece	2012	10	.pdf	application/pdf	2793	112	56	After the first revolution, the cutter starts leaving a wavy surface behind because of the bending vibration of the cutter in the normal direction, which is the direction of radial cutting force. Fig.1 Dynamic milling model of thin-walled workpieces The tangential and radial cutting forces acting on the tooth are proportional to the chip thickness and the axial depth of cut Ftj = Ktah(ϕj), Frj = KrFtj (3) where Kt is the tangential milling force coefficient which is experimentally deter- mined for a tool-workpiece material pair,Kr is the ratio of radial force coefficient to tangential force coefficient, a is the cutting width or axial depth of cut.	cache/ijassa-453.pdf	txt/ijassa-453.txt