id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
ijassa-459	Sheng, Jing; Yao, Liping	Parametric Modeling and Simulation of Orthogonal Milling Process Based Finite Element Method	2012	12	.pdf	application/pdf	2715	136	55	Created the shape of single tooth, the 2-D model of milling tool was derived from duplicating the shape of single tooth along origin O. Computing formulas of the coordinates of the points on a tooth are seen in Table 1. where θ1 is the angle between face and back of tooth,θ2 is the angle of chip flute; while γ, α01, α02 represent the rake angle, the first relief angle and the second relief angle respectively. The material of a milling tool is YS2T. The diameter of milling tool with four teeth is d=30.2 mm.	cache/ijassa-459.pdf	txt/ijassa-459.txt