# bib

id: aiti-168
author: Hsieh, Wen-Hsiang
title: Introduction to the First Issue
date: 2016-07-01
pages: 1
extension: .pdf
mime: application/pdf
words: 287
sentence: 14
flesch: 49
cache: cache/aiti-168.pdf
txt: txt/aiti-168.txt
summary:
  It is a great pleasure to include in the first issue of AITI, six papers written by leading researchers in the international community. On behalf of the Editorial Board, I am delighted to announce the publication of the inaugural issue of Advances in Technology Innovation (AITI), published by the Taiwan Association of Engineering and Technology Innovation (TAETI).


id: aiti-180
author: Svoboda, Ondrej; Machacek, Josef
title: Tubular Steel Arch Stabilized by Textile Membranes
date: 2016-10-01
pages: 3
extension: .pdf
mime: application/pdf
words: 1411
sentence: 89
flesch: 69
cache: cache/aiti-180.pdf
txt: txt/aiti-180.txt
summary:
  Introduction Design of steel structures cooperating with TSF (Tensioned Fabric Structures) requires geometrica lly and materia lly non -linear analysis with imperfect ions (GMNIA). For loading calibrated pouches with steel pellets we re used and suspended from seven points of the arch (for the symmetrica l loading see Fig. 2) or fro m four points in case of asymmetrical loading.


id: aiti-157
author: Airoldi, Alessandro; Bettini, Paolo; Boiocchi, Matteo; Sala, Giuseppe
date: 2016-07-01
pages: 3
extension: .pdf
mime: application/pdf
words: 1566
sentence: 78
flesch: 55
cache: cache/aiti-157.pdf
txt: txt/aiti-157.txt
title:
  Composite Elements for Biomimetic Aerospace Structures with Progressive Shape Variation Capabilities

summary:
  For such reasons, chiral topologies were proposed to develop the internal structure of morph ing airfoils [ 1], but manufacturing of chiral honeycombs represent a critical proble m for application to rea l world structures. Composite Corrugated Laminates The development of morphing surfaces always requires the development of a fle xib le skin to collect ae rodynamic forces .


id: aiti-207
author: Lee, Shui-Pin
title: EWMA Controller with Concurrent Adjustment for a High-Mixed Production Process
date: 2017-01-01
pages: 4
extension: .pdf
mime: application/pdf
words: 1851
sentence: 88
flesch: 61
cache: cache/aiti-207.pdf
txt: txt/aiti-207.txt
summary:
  [2] E. Sachs, A. Hu, and E. Ingolfsson, “Run by run process control: combining SPC and feedback control,” IEEE Transactions Sem- iconductor Manufacturing, vol. 8, pp. 26-43, 1995. Traditionally, the manufacturing environment was simplified as a single product and single tool process.


id: aiti-369
author: Yadav, Poonam; Lee, Dong Bok
title: Oxidation of Titanium and Ti/(TiB+TiC) Composite
date: 2017-05-09
pages: 3
extension: .pdf
mime: application/pdf
words: 1769
sentence: 108
flesch: 60
cache: cache/aiti-369.pdf
txt: txt/aiti-369.txt
summary:
  Ke ywor ds : Titaniu m, Titaniu m mat rix co mposite, Oxidation, Oxide scale 1. Following oxidation process, matrix phases and oxide scales were investigated using scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) using Cu-Kα radiation operated at 40 kV and 100 mA.


id: aiti-1011
author: E. Keith, Amber; French, Jesse J.
title: Design and Testing of a Remote Deployable Water Purification System Powered by Solar Energy
date: 2019-01-01
pages: 7
extension: .pdf
mime: application/pdf
words: 2942
sentence: 157
flesch: 57
cache: cache/aiti-1011.pdf
txt: txt/aiti-1011.txt
summary:
  Keywords: renewable energy, solar power, clean water, water purification, self-sufficient 1. Introduction Without water, a person will die of dehydration within three days [4]. An estimated 315,000 children die each year from diarrheal diseases caused by lack of clean water and poor sanitation [2].


id: aiti-159
author: Su, Pei-Hsuan
date: 2016-07-01
pages: 4
extension: .pdf
mime: application/pdf
words: 2167
sentence: 97
flesch: 54
cache: cache/aiti-159.pdf
txt: txt/aiti-159.txt
title:
  Participatory Communication Referred to Meta-Design Approach through the FleXpeaker™ Application of Innovative Material in Exhibition Design

summary:
  Here we anticipate the partic ipatory nature applied in e xhibit design and the transition to more autonomous action for discovery by museum visitors . Keywor ds : communication system, participatory design, exhibit design, flexible speaker 1.


id: aiti-205
author: Chien, Yu-Hung; Chiang, Chung-Piao
title: Optimal Warranty Length and Selling Price to Maximize the Profit
date: 2017-01-01
pages: 4
extension: .pdf
mime: application/pdf
words: 2331
sentence: 119
flesch: 64
cache: cache/aiti-205.pdf
txt: txt/aiti-205.txt
summary:
  Introduction In today’s highly competitive market of consumer products, product warranties become an important criterion that distinguishes good and poor quality products. [4] D. N. P. Murthy, O. Solem and T. Roren, “Product warranty logistics: Issues and challenges,” European Journal of Opera- tional Research, vol.


id: aiti-178
author: Chen, Yu-Fen; Wu, Jian-Hong; Huang, Chen-Chih
date: 2016-10-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2369
sentence: 140
flesch: 68
cache: cache/aiti-178.pdf
txt: txt/aiti-178.txt
title:
  Experimental Investigation into Mechanical Properties of Nanomaterial-reinforced Table Tennis Rubber

summary:
  The different surface structures of Nano- reinforced rubber 2.1. 6 Elastic modulus values of Nano-reinforced rubbers and non-reinforced rubber 3.4.


id: aiti-1031
author: Huang, Yi-Cheng; Zheng, Jing-Hong
title: Ball Nut Preload Diagnosis of the Hollow Ball Screw through Support Vector Machine
date: 2018-02-20
pages: 6
extension: .pdf
mime: application/pdf
words: 2593
sentence: 135
flesch: 59
cache: cache/aiti-1031.pdf
txt: txt/aiti-1031.txt
summary:
  The method is testified by considering the us e of ball screw pretension and different ball nut preload. Compen sated positioning technique by ball screw pretension with 5μ and 20μ was not significantly contaminated by CNC 30 minutes operation time by linear SVM prognostic diagnosis when the ball nut preload was 4 %.


id: aiti-275
author: Chen, Wei-Ling; Lin, Chia-Hung; Kan, Chung-Dann
date: 2017-06-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2665
sentence: 138
flesch: 60
cache: cache/aiti-275.pdf
txt: txt/aiti-275.txt
title:
  Assessment of Arteriovenous Shunt Pathway Function and Hypervolemia for Hemodialysis Patients by Using Integrated Rapid Screening System

summary:
  The project proposes to combine our previous study of au- dio-phono angiographic technology in detecting vascular stenosis with rapid screening system to evaluate dialysis patients’ arteriovenous routes function and their status of e xcess body fluids: inspecting and integrating the blood pressure, body weight, and fistula function work into a rapid screening system, and using the quantiza- tion of fistula phono angiography pitch to achieve assessing arteriovenous routes. The purpose of this paper is to combine our previous study of audio-phonoangiographic technology in detecting vas cular stenosis with rapid screening system to evaluate dialysis *


id: aiti-1035
author: Wankhar, Syrpailyne; A. Kota, Albert; Selvaraj, Dheepak
title: A Novel Stretch Sensor to Measure Venous Hemodynamics
date: 2018-03-01
pages: 6
extension: .pdf
mime: application/pdf
words: 3094
sentence: 176
flesch: 66
cache: cache/aiti-1035.pdf
txt: txt/aiti-1035.txt
summary:
  Measurement of venous volume using the novel stretch sensor We calculated venous volume (VV), venous filling index (VFI), ejection fraction (EF) and residual venous volume (RVF) on two normal subjects (1male, 1female) and two patients (2 males). In this paper, we demonstrate the measurement of venous volume using arrays of the novel stretch sensor and thereby enable us in developing a novel prototype instrument for measuring venou s hemodynamic.


id: aiti-277
author: Chiang, Li-Wei; Guo, Sy-Jye
title: The Research of Infrared Thermal Image Diagnostic Model for Building External Wall Tiles
date: 2017-06-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2331
sentence: 123
flesch: 62
cache: cache/aiti-277.pdf
txt: txt/aiti-277.txt
summary:
  [2] L. W. Chiang, S. J. Guo, and C. Y. Chang, “The model of visual inspection for building external wall deterioration tiles,” Journal of Architecture, vol. Based on the test results, the study reco m- mends that for frequencies between 200 and 800 Hz on the spectrogram, it can be deduced that a cavity is present in the tiles, and this can be used as basis for determining tile deterioration.


id: aiti-203
author: Chiang, Ching-Shoei
title: The Tangent Medial Circles Inside the Region Defined by Hermite Curve Tangent to Unit Circle
date: 2017-01-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2995
sentence: 151
flesch: 73
cache: cache/aiti-203.pdf
txt: txt/aiti-203.txt
summary:
  Images, surround by boundary curves, are also investigated by many researchers. The first two examples is for the symmetric boundary curve where α0=α1=α, for boundary curve with singu- lar point and with local maximum curvature respectively.


id: aiti-1020
title: Reliability Study of GaN-on-SiC HEMT RF Power Amplifiers
date: 2018-07-30
pages: 9
extension: .pdf
mime: application/pdf
words: 3428
sentence: 185
flesch: 65
cache: cache/aiti-1020.pdf
txt: txt/aiti-1020.txt
author:
  Bakowski, M.; Lang, J.; Lim, J-K.; Hellén, J.; Nilsson, T.M.J.; Schodt, B.; Poder, R.; Belov, I.; Leisner, P.

summary:
  Keywords: GaN-on SiC, HEMT, RF power amplifier, thermo-mechanical and electrical reliability 1. The objectives of this investigation are to experimentally investigate thermo-mechanical robustness of RF power amplifiers including packaged HEMT devices assembled on PCB boards and exposed to power cycling (PC) and thermal cycling (TC) and to evaluate prospective thermal management methods including thermal interface materials (TIM) by experiment and simulation.


id: aiti-1027
author: Pasam, Vamsi Krishna; Rapeti, Padmini; Babu Battula, Surendra
title: Efficacy of Nanocutting Fluids in Machining-an Experimental Investigation
date: 2018-02-20
pages: 8
extension: .pdf
mime: application/pdf
words: 3871
sentence: 240
flesch: 52
cache: cache/aiti-1027.pdf
txt: txt/aiti-1027.txt
summary:
  Thus it can be inferred that vegetable oil based nanofluids are more efficient in reducing cutting temperatures . Vegetable oil based cutting fluids exhibited better performance t han mineral oils by way of tool life, tool wear, cutting forces and chip formation


id: aiti-2520
author: Ji, Dae-Hyeong; Choi, Hyeung-Sik; Jeong, Sang-Ki; Oh, Ji-Youn; Kim, Seo-Kang; You, Sam-Sang
title: A Study on Heading and Attitude Estimation of Underwater Track Vehicle
date: 2019-03-18
pages: 10
extension: .pdf
mime: application/pdf
words: 4208
sentence: 242
flesch: 64
cache: cache/aiti-2520.pdf
txt: txt/aiti-2520.txt
summary:
  To reduce the accumulation of integration error, we constructed an extended Kalman filter algorithm using gyro data, acceleration data, and geomagnetism data. In Fig. 4, the AHRS, GPS, and IMU sensor data is used for the algorithm that is ported to the embedded Linux.


id: aiti-176
author: Lee, Yi-Ping
title: Innovation Management of Stock Trading System
date: 2016-10-01
pages: 5
extension: .pdf
mime: application/pdf
words: 3587
sentence: 113
flesch: 56
cache: cache/aiti-176.pdf
txt: txt/aiti-176.txt
summary:
  Basically, business owned stock are open trade in the ma rket, thus, the price of a stock should be some distance protect by the business, if the price is abnormally upward or down ward for reasons very often, which will be a sign of under value or over va lue of the business stock, and the other condition is the opportunist try to control and gain benefit fro m this business stock, thus, business need to develop its trading strategy in keep an amount of stock and capital to buy and sale its stock, that is the trade strategy to that business. Every country have its own different stock trading range limits, stock trading market may be a country's economic showcase, China’s stock change range usually keep as ten percent, but they tried a system na med Circu it Breake r System(CBS) in recent years to stop the trade in stock market.


id: aiti-156
author: Wang, Shyi-Wen
title: Benefit Analysis of Emergency Standby System Promoted to Cogeneration System
date: 2016-07-01
pages: 6
extension: .pdf
mime: application/pdf
words: 3058
sentence: 173
flesch: 67
cache: cache/aiti-156.pdf
txt: txt/aiti-156.txt
summary:
  24 (13) Step 6: Print out the optima l operation schedule, operation benefit, daily ma ximu m de mand, and then stop the process. Where i: time interval PSi: pseudo switch used to indicate the on/off (1/0) status of CGS during time interval i OC(PGi, HGi): operation cost of the CGS during time interval i (NT$/h) PGi: output power of the CGS during time interval i (kWh)


id: aiti-273
author: Chen, Sheng-Liang; Dinh, Hoai-Nam; Nguyen, Van-Thanh
title: Synchronized Injection Molding Machine with Servomotors
date: 2017-06-01
pages: 6
extension: .pdf
mime: application/pdf
words: 3675
sentence: 215
flesch: 66
cache: cache/aiti-273.pdf
txt: txt/aiti-273.txt
summary:
  Moreover the determining a suitable injection time, screw position and cavity pressure for transfer from injection v e- locity control to packing pressure control which is commonly called filling to packing switchover point is also critical for high quality part. [9] N. A kasaka, “A synchronous position co n- trol method at pressure control between mu lti-ac servomotors driven in inject ion mo lding machine,” in SICE 2003 Annual Conference, vol. 3, pp. 2712 -2719, Aug. 2003.


id: aiti-2522
author: Sasaki, Yuya; Yokotani, Tetsuya
title: Performance Evaluation of MQTT as a Communication Protocol for IoT and Prototyping
date: 2019-01-01
pages: 9
extension: .pdf
mime: application/pdf
words: 3753
sentence: 246
flesch: 58
cache: cache/aiti-2522.pdf
txt: txt/aiti-2522.txt
summary:
  In the case of MQTT communication, the access delay time is measured from the PUBLISH device to the SUBSCRIBE device via the MQTT broker. 10 Network configuration of access delay measurement In the case of HTTP communication, the access delay time is measured when the server is accessed from the PC to acquire data.


id: aiti-10525
author: Widjajakusuma, Jack; Bali, Ika; Ng, Gino Pranata; Wibowo, Kevin Aprilio
date: 2022-07-27
pages: 8
extension: .pdf
mime: application/pdf
words: 3858
sentence: 214
flesch: 56
cache: cache/aiti-10525.pdf
txt: txt/aiti-10525.txt
title:
  An Experimental Study on the Mechanical Properties of Low-Aluminum and Rich-Iron-Calcium Fly Ash-Based Geopolymer Concrete

summary:
  The average compressive strength of geopolymer concrete reaches 38.2 MPa, which is 13% lower than normal concrete. The split tensile and compressive strengths of geopolymer concrete are 9.27% and 8.54%, while the split tensile and compressive strengths of normal concrete are 10.87% and 13.77%, respectively (Table 3).


id: aiti-10034
date: 2023-01-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4464
sentence: 230
flesch: 58
cache: cache/aiti-10034.pdf
txt: txt/aiti-10034.txt
author:
  Tong Sy Tien; Nguyen Thi Minh Thuy; Vu Thi Kim Lien; Nguyen Thi Ngoc Anh; Do Ngọc Bich; Le Quang Thanh

title:
  Calculation of Temperature-Dependent Thermal Expansion Coefficient of Metal Crystals Based on Anharmonic Correlated Debye Model

summary:
  1 Thermal expansion of metal with a change in temperature The TE coefficient can be determined [11-12] by: ( ) ( ) ( ) ( ) 1 0 0 0 T dr T d T T T r dT r dT σ α ∆ = = ∆ ℓ ≃ ℓ (1) where � is the absolute temperature, ���� is the instantaneous distance between the backscattering and absorbing atoms, �� is the equilibrium distance between the backscattering and absorbing atoms, and � � ���� is the first EXAFS cumulant and can be expressed in terms of the power moments of the radial pair distribution (RD) function (5) where �� ( 1i = , 2) is the mass of the ith atom and equals m in the monatomic crystals, respectively, � = � ��/�� + ��� is the reduced mass of the absorber and backscatter, ��� is a unit vector, the sum i is the over absorbers ( 1i = ) and backscatters ( 2i = ), the sum j is over the nearest neighbors, and.


id: aiti-1024
author: Rutledge, Judah; French, Jesse J.
title: Design and Analysis of a Water Channel for Characterization of Low Reynolds Number Flows
date: 2018-03-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4452
sentence: 201
flesch: 64
cache: cache/aiti-1024.pdf
txt: txt/aiti-1024.txt
summary:
  Therefore, the pump head, 𝐻(𝑄), had to be incorporated into the iterative solution for channel flow . 4 Hydrostatic pressure on water channel panel In most of the channel design, the limit ing factor was not structural integrity, but was instead deflection.


id: aiti-11957
author: Jin-Siang Shaw; Yi-Hua Huang
title: Virtual Modeling of an Industrial Robotic Arm for Energy Consumption Estimation
date: 2023-08-11
pages: 11
extension: .pdf
mime: application/pdf
words: 5217
sentence: 290
flesch: 53
cache: cache/aiti-11957.pdf
txt: txt/aiti-11957.txt
summary:
  Keywords: digital twin, robotic arm, Unity, Euler-Lagrange equation, energy consumption 1. Although the simulation of a robotic arm in ROS using Moveit, Gazebo, and Rviz is quite common, no cases have been found that utilize the ROS framework in constructing a digital twin model capable of estimating energy consumption for robotic arms.


id: aiti-10658
author: Van Thao Le; Dinh Si Mai; Van Thuc Dang; Duc Manh Dinh; Thi Hong Cao; Van Anh Nguyen
date: 2023-01-01
pages: 11
extension: .pdf
mime: application/pdf
words: 5217
sentence: 285
flesch: 63
cache: cache/aiti-10658.pdf
txt: txt/aiti-10658.txt
title:
  Optimization of Weld Parameters in Wire and Arc-Based Directed Energy Deposition of High Strength Low Alloy Steels

summary:
  (2): ˆ worst ij j ij best worst j j m m m m m − = − (2) where �� �� is the normalized value of the �� alternative for ��� attribute, �� ���� and �� ����� are the best and worst values of ��� attribute. [14] V. T. Le, Q. H. Hoang, V. C. Tran, D. S. Mai, D. M. Dinh, and T. K. Doan, “Effects of Welding Current on the Shape and Microstructure Formation of Thin-Walled Low-Carbon Parts Built By Wire Arc Additive Manufacturing,” Vietnam Journal of Science and Technology, vol.


id: aiti-2533
title: A Controlled Fermentation Environment for Producing Quality Soya Sauce
date: 2019-01-01
pages: 10
extension: .pdf
mime: application/pdf
words: 5454
sentence: 273
flesch: 58
cache: cache/aiti-2533.pdf
txt: txt/aiti-2533.txt
author:
  Ferng, Sophia; Huang, Wei-Hua; Wu, Chien-Ping; Lu, Yung-Tsong; Hsu, Cheng-Kuang; Chiou, Robin Yih-Yuan; Ting, Ching-Hua

summary:
  [6] F. M. Yong and B. J. B. Wood, “Microbiology and biochemistry of soy sauce fermentation,” Advances in Applied Microbiology, vol. In sauce moromi fermentation, the proteins and polysaccharides in the moromi are hydrolyzed by the fungal protease and amylase to form different types of small nitrogen compounds and sugars, such as amino acids and reducing sugars.


id: aiti-11508
author: Noor A’fiana Desyani; Arief Sabdo Yuwono; Heriansyah Putra
title: Assessing the Performance of Melted Plastic as a Replacement for Sand in Paving Block
date: 2023-07-04
pages: 10
extension: .pdf
mime: application/pdf
words: 5312
sentence: 338
flesch: 70
cache: cache/aiti-11508.pdf
txt: txt/aiti-11508.txt
summary:
  The potential of melted plastic as a sand substitute in paving blocks was investigated in this study. Paving blocks were made with 1 Portland cement and 4 sand aggregates [18].


id: aiti-11638
author: Jhonatan A. Becerra-Duitama; Mauricio Mauledoux; Óscar F. Avilés
title: Design of an Adiabatic Calorimeter for Cementitious Mixtures by Multi-Objective Optimization
date: 2023-07-04
pages: 11
extension: .pdf
mime: application/pdf
words: 5472
sentence: 299
flesch: 54
cache: cache/aiti-11638.pdf
txt: txt/aiti-11638.txt
summary:
  [5] J. S. Xia, M. K. Khabaz, I. Patra, I. Khalid, J. R. N. Alvarez, A. Rahmanian, et al., “Using Feed-Forward Perceptron Artificial Neural Network (ANN) Model to Determine the Rolling Force, Power and Slip of the Tandem Cold Rolling,” ISA Transactions, vol. 132, pp. 353-363, January 2023. [10] K. A. Riding, J. Vosahlik, K. Bartojay, C. Lucero, A. Sedaghat, A. Zayed, et al., “Methodology Comparison for Concrete Adiabatic Temperature Rise,” ACI Materials Journal, vol. 116, no. 2, pp. 45-53, 2019.


id: aiti-366
author: Islam, S.M. Sofiqul; Dey, Emon Kumar; Tawhid, Md. Nurul Ahad; Hossain, B. M. Mainul
title: A CNN Based Approach for Garments Texture Design Classification
date: 2017-05-09
pages: 7
extension: .pdf
mime: application/pdf
words: 5766
sentence: 409
flesch: 60
cache: cache/aiti-366.pdf
txt: txt/aiti-366.txt
summary:
  [9], based on Caffe toolkit proposed three different architectures of deep CNN models: VGG_F, VGG_M and VGG_S; each of which explores a different speed/accuracy trade-off: (1) VGG_F: Th is CNN arch itecture is almost simila r to Ale xNet. Proposed model is then applied alongside with two well-known deep Convolutional Neural Network (CNN) models AlexNet and VGG_S in two different garment datasets for the purpose of training and testing.


id: aiti-310
author: Boretti, Albert
title: Numerical Study of the Operation of Motorcycles Covering the Urban Dynamometer Driving Schedule
date: 2017-05-09
pages: 8
extension: .pdf
mime: application/pdf
words: 6015
sentence: 313
flesch: 76
cache: cache/aiti-310.pdf
txt: txt/aiti-310.txt
summary:
  Ca nada Sc re a min ' Eag le ® st re et pe rfo rmanc e tun e r kit,” ht tp ://a ccessories.ha rley -d av idson.ca/p rodu ct/sc re a min -eag lesup/sup-st re et -p erfo rmanc e -tune r-kit/ 41000008B, re trieved August 31, 2016. In the UDDS cyc le, Fig. 2, only in one of the acceleration, cruise and deceleration schedules it is requested a bike velocity of 90 km/h, and in only 3 other areas the bike reaches a speed above 50 km/h but less than 60 km/h. Figs. 4, 5 and 6 present reference data of BM EP, torque and power vs. engine speed and throttle opening % for the typica l large cruiser considered here, having a lo w displacement specific powe r and torque, lo w ma ximu m speed.


id: aiti-2529
author: Lin, Jwu-Rong; Huang, Chen-Jui; Chen, Ching-Yu; Shiau, Huey-Ling; Yeh, Yan-Chen
title: New Ventures, Internationalization, and Asymmetric Grin Curve: Analysis of Taiwan’s Big Data
date: 2019-01-01
pages: 14
extension: .pdf
mime: application/pdf
words: 5908
sentence: 331
flesch: 60
cache: cache/aiti-2529.pdf
txt: txt/aiti-2529.txt
summary:
  This paper adopts the big data composed of 104,377 Taiwanese manufacturers from the 2011 Industry, Commerce, and Service Census to assess impact of the business life cycle, brand revenue, R&D spending, and internationalization on value creation. First, the link of the firm’s operating years with value creation is characterized by a quadratic U-shaped curve where the minimum point corresponds to 15 years of operation, suggesting a cost of lower value added for new ventures at the early stage of development.


id: aiti-206
author: Inoue, Masumi; Choi, Heesup; Sudoh, Yuhji; Ayuta, Koichi
date: 2017-01-01
pages: 3
extension: .pdf
mime: application/pdf
words: 1552
sentence: 81
flesch: 60
cache: cache/aiti-206.pdf
txt: txt/aiti-206.txt
title:
  Experimental Study of Leaching and Penetration of Nitrite ions in Nitrite-type Repair Materials on the Surface of Concrete

summary:
  The specimen surfaces excluding test surfaces were coated with an epoxy resin in order to prevent nitrite ion penetration. 22 - 24 22 Experimental Study of Leaching and Penetration of Nitrite ions in Nitrite-type Repair Materials on the Surface of Concrete Masumi Inoue 1,* , Heesup Choi 1 , Yuhji Sudoh 2 , and Koichi Ayuta 1 1 Department of Civil and Environmental Engineering, Kitami Institute of Technology, Hokkaido, Japan.


id: aiti-175
author: Wu, Shih-Jeh; Hsu, Hsiang-Chen; Lin, Wen-Fei
date: 2016-10-01
pages: 4
extension: .pdf
mime: application/pdf
words: 1903
sentence: 128
flesch: 68
cache: cache/aiti-175.pdf
txt: txt/aiti-175.txt
title:
  Reduction of Residual Stresses in Sapphire Cover Glass Induced by Mechanical Polishing and Laser Chamfering Through Etching

summary:
  Sapphire glass is made of colorless plates of synthetic corundum, i.e . In fact, sapphire glass does not have a glass -like a morphous structure, but rather a crystalline structure.


id: aiti-160
author: Takano, Atsushi
title: Buckling Experiment on Anisotropic Long and Short Cylinders
date: 2016-07-01
pages: 3
extension: .pdf
mime: application/pdf
words: 1669
sentence: 85
flesch: 69
cache: cache/aiti-160.pdf
txt: txt/aiti-160.txt
summary:
  References [1] A. Takano, “Statistical knockdown factors of buckling anisotropic cylinders under axial compression,” Journal of Applied Mechanics, vol. 79, 051004, pp 1-17, 2012. Note that an e xtre me ly low knockdown factor 0.397 was caused by 8mm of offset load , and the modified knockdown factor considering the offset is 0.481.


id: aiti-179
author: Chen, Dyi-Cheng; Huang, Chen-Kun
title: Study of Injection Molding Warpage Using Analytic Hierarchy Process and Taguchi Method
date: 2016-10-01
pages: 4
extension: .pdf
mime: application/pdf
words: 1919
sentence: 88
flesch: 59
cache: cache/aiti-179.pdf
txt: txt/aiti-179.txt
summary:
  The levels, factors and orthogonal array variance and the combination are shown in Table 3 respectively. This study integrated Analytic Hierarchy Process and Taguchi method to investigate into injection molding warpage.


id: aiti-158
author: Lee, Yi-Ping
title: Innovation Management of Patent Commercialization
date: 2016-07-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2957
sentence: 109
flesch: 53
cache: cache/aiti-158.pdf
txt: txt/aiti-158.txt
summary:
  Researchers try hard to enhance the rate of patent comme rcia lization. This paper focus on innovation of organization and management to enhance the rate of patent comme rcia lization.


id: aiti-204
author: Tang, Zhi-Long; Kuo, Ting-An; Liu, Hsiao-Han
title: The Study of the Microbes Degraded Polystyrene
date: 2017-01-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2272
sentence: 130
flesch: 65
cache: cache/aiti-204.pdf
txt: txt/aiti-204.txt
summary:
  To take advantage of that Tenebrio molitor and Zophobas morio can eat and digest polystyrene as its diet, we analyzed these special microbes with PS plate and PS turbidity system with time courses. And then transferred the microbes on the basal agar plate to PS plate with yeast extract incubating for 24 h at 37℃ as above conditions.


id: aiti-2376
author: Hong, Chih-Chiang; Tsai, Deng-Maw
title: Application of Rotating Arms Type Permanent Magnet Motor
date: 2019-01-01
pages: 7
extension: .pdf
mime: application/pdf
words: 4162
sentence: 205
flesch: 56
cache: cache/aiti-2376.pdf
txt: txt/aiti-2376.txt
summary:
  Abstract The present application related to a rotating arm type permanent magnet motor, in particular to a permanent magnet motor that was actuated by the action of the magnetic forces of a permanent magnet stator of a stator module and two thin ring permanent magnets of a rotor module. The rotating arm type permanent magnet motor comprised an external support frame base, a stator module and a rotor module.


id: aiti-177
author: Nascu, Ioana; Nascu, Ioan; Vlad, Grigore
title: Predictive Adaptive Control of an Activated Sludge Wastewater Treatment Process
date: 2016-10-01
pages: 3
extension: .pdf
mime: application/pdf
words: 1575
sentence: 96
flesch: 51
cache: cache/aiti-177.pdf
txt: txt/aiti-177.txt
summary:
  [4] B. Holenda, E. Do mokos, A. Rédey, and J. Faza kas, “ Dissolved oxygen control of the activated sludge wastewater treatment process using model predictive control,” Co mputers and Chemica l Engineering, vol. The use of the basic identification scheme may lead to unstable adaptive process control.


id: aiti-368
author: Kim, MinJung
title: High-temperature Corrosion of T22 Steel in N2/H2S-mixed Gas
date: 2017-05-09
pages: 4
extension: .pdf
mime: application/pdf
words: 2447
sentence: 163
flesch: 70
cache: cache/aiti-368.pdf
txt: txt/aiti-368.txt
summary:
  T22 steel cor- roded rapidly, forming outer FeS scales and inner (FeS, FeCr2O4)-mixed scale. The outer scale was d e- tached from the inner scale, and vertica l cracks were seen in the inner scale, owing to the la rge stress arisen by (1) the mis match in the therma l e xpansion coeffic ients among the outer scale, inner scale, and the matrix, (2) the difference in the growth rates of various oxides and sulfides, and (3) the hydrogen dissolution in the scale.


id: aiti-1018
author: Bonnaud, Olivier; Danto, Yves; Kuang, Ying-Hui; Yuan, Li
date: 2018-03-01
pages: 7
extension: .pdf
mime: application/pdf
words: 3502
sentence: 192
flesch: 50
cache: cache/aiti-1018.pdf
txt: txt/aiti-1018.txt
title:
  International Flipped Class for Chinese Honors Bachelor Students in the Frame of Multidisciplinary Fields: Reliability and Microelectronics

summary:
  The subjects of the presenta tion and of the short report cover the most important aspects of the field, i.e., the evolution of the integration, the development of new technologies, the extension of the field of applications, more especially in the evolution of the connecting objects and of internet of things (IoT) on the following topics for the microelectronics field:  new technologies for the future integration ,  evolution of MEMS,  large area electronics ,  microelectronics for telecommunications,  connecting Object for Environment Application  the substrates for integrated microelectronics and solar cells . These two subjects are therefore part of the objectives for students and the challenge is to choose the best pedagogical way to acquir e these skill.


id: aiti-276
author: A., Kamaruddin; Uyun, Aep S.; Bamahry, Alie; Imanda, Rino
title: Simulation of Desiccant Cooling
date: 2017-06-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2752
sentence: 129
flesch: 68
cache: cache/aiti-276.pdf
txt: txt/aiti-276.txt
summary:
  [5] M. M. S. De zfouli, S. Mat, G. Pirasteh, K. S. M. Sahari, K. Sopian, and M. H. Ruslan, “Simu lation analysis of the four configure- tions of solar desiccant cooling system us- ing evaporative cooling in tropical weather in Malaysia,” International Journal of Photoenergy, vol. 2014, http://dx.doi.org/10.1155/2014/ 843617 The purpose of the study is to obtain mathe matica l mode l for the purpose of simula - tion of desiccant cooling system.


id: aiti-1010
author: A. Johnson, Gabriel; J. French, Jesse
title: Evaluation of Infill Effect on Mechanical Properties of Consumer 3D Printing Materials
date: 2018-07-30
pages: 6
extension: .pdf
mime: application/pdf
words: 2810
sentence: 160
flesch: 60
cache: cache/aiti-1010.pdf
txt: txt/aiti-1010.txt
summary:
  Table 1 Approximate material properties of printed materials, taken from various sources Material Density The PLA, ABS, PETG, and Nylon materials were printed from nominal 2.85mm printer filament, while the ASA and PC/ABS were printed from nominal 1.75mm printer filament.


id: aiti-155
author: Lee, Kuo-Long; Chien, Shih-Bin; Pan, Wen-Fung
date: 2016-07-01
pages: 6
extension: .pdf
mime: application/pdf
words: 3012
sentence: 169
flesch: 73
cache: cache/aiti-155.pdf
txt: txt/aiti-155.txt
title:
  The Effect of the Curvature-Rate on the Response of Local Sharp-Notched SUS304 Stainless Steel Tubes under Cyclic Bending

summary:
  4 Experimentally determined mo ment (M) - curvature () curve for local sharp- notched SUS304 stainless steel tube, with notch depth of a = 0.2 mm, subjected to cyclic bending under the curvature-rate o f 0.035 m -1 s -1 Figs. 5(a)-(b) present experimentally determined mo ment (M) - curvature () curve for local sharp-notched SUS304 stainless steel tubes , with notch depth of a = 0.2 mm, subjected to cyclic bending under the curvature-rate of 0.0035 and 0.35 m -1 s -1 , respectively. 01 - 06 4 Copyright © TAETI (a) (b) Fig. 5 Experimentally determined mo ment (M) - curvature () curve for local sharp- notched SUS304 stainless steel tubes , with notch depth of a = 0.2 mm, subjected to cyclic bending under the curvature- rates o f (a) 0.0035 and (b) 0.35


id: aiti-274
author: Hsu, Hsiang-Chen; Chu, Li-Ming; Wang, Zong-Kun; Tsao, Shu-Chi
title: Position Control and Novel Application of SCARA Robot with Vision System
date: 2017-06-01
pages: 6
extension: .pdf
mime: application/pdf
words: 2434
sentence: 143
flesch: 64
cache: cache/aiti-274.pdf
txt: txt/aiti-274.txt
summary:
  SCARA robot was introduced in SEIKO watch assembling lines in 1981 and since then industrial SCARA robot has been widely used in electronic, semiconductor, automobile, electronic, plastic, food and pharmaceutica l factories The PID control techniques [7] have been proposed to solve the nonlinearity issue with acceptable results to control the move ment of robot arms .


id: aiti-272
author: Huang, Yi-Cheng; Chen, Xiang-Yuan
title: Investigation of a Ball Screw Feed Drive System Based on Dynamic Modeling for Motion Control
date: 2017-06-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2694
sentence: 137
flesch: 72
cache: cache/aiti-272.pdf
txt: txt/aiti-272.txt
summary:
  Since ba ll screw play a significant role in co n- verting rotary motion into linear mot ion Pre - loading is effective to eliminate backlash and increase the stiffness of ball screw for precision motion concerns. 10N s/m viscous damp ing coefficient of the supp orting bearin g of the ball screw (Bb) 10N s/m rotational viscous damp ing co- efficient of the motor (Qm) 0N ms rotational viscous damp ing co- efficient of the sup p ort bearing of ball screw (Qb) 0N ms angle conversion axial dis- p lacement of the constant (R) 0.0025 motor torque (T) 1.8× 10−3Nm/𝑠2 disp lacement of the working table (Xt) State Variable (m) axial disp lacement of the ball screw (Xb) State Variable (m) rotation angle of the motor (θm) State Variable (rad) rotation angle of the ball screw (θb) State Variable (rad)


id: aiti-1023
author: Wu, Chun-Hui; Yan, Yih-Her; Shu, Kuen-Ming
title: Projecting the Mental Model of Social Networking Site Usage
date: 2017-10-20
pages: 7
extension: .pdf
mime: application/pdf
words: 3440
sentence: 193
flesch: 50
cache: cache/aiti-1023.pdf
txt: txt/aiti-1023.txt
summary:
  Keywords : social networking sites, projective technique, Zaltman metaphor elicitation technique, mental model, means -end chain theory 1. In ternet found that nearly 80 percent of online adults used social networking sites, and almost 88% of teens and young adults were a member of at least one social network


id: aiti-1034
author: Rosu, Marius Corneliu; Yassin-Kassab, Hamed; Iliesiu, Adriana; Georgica Obreja, Serban
title: A GI Proposal to Display ECG Digital Signals Wirelessly Real-time Transmitted onto a Remote PC
date: 2018-03-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3782
sentence: 177
flesch: 52
cache: cache/aiti-1034.pdf
txt: txt/aiti-1034.txt
summary:
  The ECG signal is transmitted from the Router Se nsor (RS) to an end Coordinator Node (CN) plugged -in to the laptop via USB port; RS acquires ECG signal in analogical mode, and is also responsible with sampling, quantization and sending it wirelessly direct to CN. From these, ECG signal is graph transposition of heart electrical activity, and the mechanical activity of the heart is somewhat regular with the exception of being patients with Cardiovascular Disease (CVD), so ECG may be considered a quasi-periodic waveforms .


id: aiti-1030
author: Lin, Sheam-Chyun; Lin, Yu-Ming; Haung, Yu-Song; Yao, Cheng-Liang; Jian, Bo-Syuan
title: Flowfield Analysis of a Pneumatic Solenoid Valve
date: 2018-03-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3834
sentence: 193
flesch: 60
cache: cache/aiti-1030.pdf
txt: txt/aiti-1030.txt
summary:
  [12] R. Farrell, L. I. Ezekoye, and M. Rain, “Check valve flow and disk lift simulation using cfd ,” 2017 Pressure Vessels and Piping Conf. For ensuring the safety of human being, the reliable and effect ive solenoid valve is in great de mand to shorten the reaction time and thus becomes the topic of this research.


id: aiti-1026
author: Hsu, Hsiang-Chen; Wang, Shaw-Yuan; Chu, Li-Ming
title: A Study on Aluminum Pad Large Deformation during Copper Wirebonding for High Power IC Package
date: 2018-02-20
pages: 8
extension: .pdf
mime: application/pdf
words: 3009
sentence: 168
flesch: 63
cache: cache/aiti-1026.pdf
txt: txt/aiti-1026.txt
summary:
  Another issue is more bonding power and higher working temperature required in Cu wire bonding process. Because the complete mechanism of the wire bonding process includes z-motion, impact and ultrasonic vibration stages [9-10], many material properties of bond wire were scarcely realized.


id: aiti-10548
author: Lee, Jae-Yong; Son, Nam-Sun
date: 2023-01-01
pages: 9
extension: .pdf
mime: application/pdf
words: 3502
sentence: 188
flesch: 61
cache: cache/aiti-10548.pdf
txt: txt/aiti-10548.txt
title:
  On the Estimation of the Mission Performance Index of Unmanned Surface Vehicles Based on the Mission Coverage Area 

summary:
  Y value converted from Ltij of j th trajectory point in ith USV d(i)j m Distance between USV trajectories; ����� = ������ − ���� � �� + ������ − ����� � �� Td(i)j m Total distance of USV trajectory; ������ = ∑ ���� �� j Cat(i) m2 Total USV trajectory area; ������ = ������ × ���� W(i)xj m X of j th waypoint for ith USV W(i)yj m


id: aiti-345
author: Lu, Chun-Liang; Lin, Tsun-Chen
date: 2016-09-26
pages: 5
extension: .pdf
mime: application/pdf
words: 4385
sentence: 266
flesch: 61
cache: cache/aiti-345.pdf
txt: txt/aiti-345.txt
title:
  Improved SVM Classifier Incorporating Adaptive Condensed Instances Based on Hybrid Continuous-Discrete Particle Swarm Optimization

summary:
  Considering the tradeoff b e- tween the classification accuracy and selected feature number, these two weight 1w and 2w values can be adjusted according to the preference for SVM classifier design. Experiment results show that the proposed framework can achieve better performance than other published methods in literature and provide a simple but subtle strategy to effectively improve the classification accuracy for SVM classifier.


id: aiti-1573
author: Kumar, J. Satheesh; Sankar, Deepu
title: Implementation of Adaptive Embedded Controller for a Temperature Process
date: 2019-03-18
pages: 11
extension: .pdf
mime: application/pdf
words: 4905
sentence: 357
flesch: 59
cache: cache/aiti-1573.pdf
txt: txt/aiti-1573.txt
summary:
  Fig. 1 Block diagram of thermal process control systems The above mentioned experimental setup is the prototype of a thermal process. This will help in the field of process control to implement complex algorithms with low-cost devices.


id: aiti-2530
author: Chen, Ta-Cheng; Chen, Yi-Wen; Chen, Yen-Shan; Kuo, Yun-Tzu
title: A Cloud Information Platform for 3D Printing Rehabilitation Devices
date: 2019-03-18
pages: 11
extension: .pdf
mime: application/pdf
words: 4494
sentence: 248
flesch: 51
cache: cache/aiti-2530.pdf
txt: txt/aiti-2530.txt
summary:
  In this study, we applied the information technology and cloud-based technology to design a simple and user-friendly web-based interface for making 3D printing splint. The production process of 3D printing splint sequence diagram [7] Table 1 Comparison of Traditional splints and 3D Printing splints Traditional splints 3D Printed splints Production methods Manual 3D Printer Time to use Shorter Longer Breathable Medium Height Customized Low Height Waterproof


id: aiti-2523
author: Machacek, Josef; Pichal, Radek
title: Prestressed Stainless Steel Stayed Columns with Two Crossarms
date: 2019-01-01
pages: 10
extension: .pdf
mime: application/pdf
words: 5203
sentence: 290
flesch: 65
cache: cache/aiti-2523.pdf
txt: txt/aiti-2523.txt
summary:
  Similar principal behavior as in the case of prestressed stayed columns with just one crossarm is confirmed and the three zones depending on the value of prestressing are revealed. [3] M. A. Wadee, L. Gardner, and A. I. Osofero, “Design of prestressed stayed columns,” Journal of Constructional Steel Research, vol. 80, pp.


id: aiti-2521
author: Jari, Kaivo-Oja; Lauraeus, Theresa
date: 2019-03-18
pages: 11
extension: .pdf
mime: application/pdf
words: 5500
sentence: 346
flesch: 40
cache: cache/aiti-2521.pdf
txt: txt/aiti-2521.txt
title:
  Analysis of 2017 Gartner’s Three Megatrends to Thrive the Disruptive Business, Technology Trends 2008-2016, Dynamic Capabilities of VUCA and Foresight Leadership Tools

summary:
  Disruptive technologies The importance of new technologies for society arises from the discovery that ideas and their implementation generate growth and well-being [1]. When we focus on technology innovation, it is significantly important to evaluate these high-level trends and the featured technologies, as well as the potential impact on their businesses.


id: aiti-11232
author: Xian Wen Sim; Sie Long Kek; Sy Yi Sim; Jiao Li
title: State Estimation and Optimal Control of Four-Tank System with Stochastic Approximation Approach
date: 2023-04-01
pages: 12
extension: .pdf
mime: application/pdf
words: 6056
sentence: 277
flesch: 65
cache: cache/aiti-11232.pdf
txt: txt/aiti-11232.txt
summary:
  Denote ��, ��, ��, and �� as the liquid level of tanks 1, 2, 3, and 4, respectively, while �� and �� are the flow parameters of pumps 1 and 2. Fig. A A γ− = − + (18) Define the state variable � = ���, ��, ��, ��� � with �� = ��, �� = �� , �� = ��, and �� = �� , and let the control variable � = ���, ��� � with �� = �� and �� = ��, the dynamics of the four-tank system in Eqs.


id: aiti-1152
author: Hong, Chih-Chiang
title: Effects of Unsteady Aerodynamic Pressure Load in the Thermal Environment of FGM Plates
date: 2018-03-01
pages: 9
extension: .pdf
mime: application/pdf
words: 5029
sentence: 234
flesch: 72
cache: cache/aiti-1152.pdf
txt: txt/aiti-1152.txt
summary:
  In 2006, Prakash and Ganapathi [10] investigated supersonic flutter behavior of FGM plates and flat panels by using the FEM . The properties of indiv idual constituent material of FGM a re functions of enviro nment te mperature T. The time-dependent, linear FSDT equations of displacements u, vand w\ of FGM plates are assumed in the following [19]. ),,(),,( 0 tyxztyxuu x  (1) ),,(),,( 0 tyxztyxvv y  ),,( tyxww  where u 0 and v 0 a re d isplacements in the x and y a xes direction, respectively, w is t ransverse displacement in the z a xis direction of the middle-plane of plates,  x and  y are the shear rotations, t is time.


id: aiti-11678
author: Karishma Agrawal; Supachai Vorapojpisut
title: A Hidden Semi-Markov Model for Predicting Production Cycle Time Using Bluetooth Low Energy Data
date: 2023-07-20
pages: 13
extension: .pdf
mime: application/pdf
words: 6115
sentence: 357
flesch: 63
cache: cache/aiti-11678.pdf
txt: txt/aiti-11678.txt
summary:
  with �ABCBD�BE end end �EJKL� MN �1: �FG���@HABCBD�BE � � �ABCBD�BE � � O�, �EJKL� MN P � � O�, @P end 4.2. The constraint for � ��� is that the sum of � ��� from � � 1 to D is equal to 1 for all states �


id: aiti-202
title: Assessment of a Charge Transport Model for LDPE through Conduction Current Measurement
date: 2017-01-01
pages: 7
extension: .pdf
mime: application/pdf
words: 4142
sentence: 235
flesch: 61
cache: cache/aiti-202.pdf
txt: txt/aiti-202.txt
author:
  Kusumasembada, Anggie Chandra; Teyssedre, Gilbert; Roy, Severine Le; Boudou, Laurent; Sinisuka, Ngapuli Irmea

summary:
  For this reason, space charge measurements, on the one hand, and models of charge transport en- compassing charge generation, trapping and transport have been developed. The purpose of this paper is to enrich study regarding LDPE charge transport by presenting measurement results on charging and discharging currents and comparing results with an already available model of conduction based on bipolar charge generation and transport.


id: aiti-2982
author: Boretti, Albert; Lappas, Petros
title: Complex Independent Laboratory Tests to Signify Fuel Economy and Emissions under Real World Driving
date: 2019-03-18
pages: 14
extension: .pdf
mime: application/pdf
words: 7665
sentence: 421
flesch: 61
cache: cache/aiti-2982.pdf
txt: txt/aiti-2982.txt
summary:
  The CO2 emission per liter of diesel fuel was shown in Parker [14] to range from a maximum of 3,049 g for a minimum of 2,125 g, with an average of 2,625 g. The CO2 emission per liter of petrol fuel was shown in Parker 6 shows the carbon dioxide emissions in g CO2 per litre of diesel fuel consumed.


id: aiti-418
author: Liu, Nien-Te; Wu, Chang-Tzuoh
title: The Innovative Bike Conceptual Design by Using Modified Functional Element Design Method
date: 2016-11-18
pages: 4
extension: .pdf
mime: application/pdf
words: 2354
sentence: 143
flesch: 61
cache: cache/aiti-418.pdf
txt: txt/aiti-418.txt
summary:
  Liu and Wu have proposed the representations for bicycle characteristics, but the process for bicycle design is not mentioned in the study [3]. 5. Conclusions The approach proposed by this research is to modified functional e le ments design method for bicycle design.


id: aiti-416
author: Yang, Jinn-Min; Wei, Shih-Hsuan
date: 2016-11-18
pages: 5
extension: .pdf
mime: application/pdf
words: 2544
sentence: 160
flesch: 66
cache: cache/aiti-416.pdf
txt: txt/aiti-416.txt
title:
  Spatial and Spectral Nonparametric Linear Feature Extraction Method for Hyperspectral Image Classification

summary:
  Unlike lots of feature extraction methods are based only on the spectral (band) information of the training sam- ples, some feature extraction methods integrating both spatial and spectral information of training samples show more effective results in recent years. [6] B. C. Kuo and D. A. Landgrebe, “Non- parametric we ighted feature e xtract ion for classification,” IEEE Transaction on Geo- science and Re mote Sensing, vol.


id: aiti-4080
author: Huang, Chi-Fu; Jhang, Jyun-Hao
title: Efficient RSU Selection Approaches for Load Balancing in Vehicular Ad Hoc Networks
date: 2020-01-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3973
sentence: 257
flesch: 66
cache: cache/aiti-4080.pdf
txt: txt/aiti-4080.txt
summary:
  In Vehicle-based scheme, vehicles choose their serving RSU according to the load index, trajectories, and path lengths to RSUs, independently and distributedly. 3.1. In recent years, vehicles on the move can also enjoy the convenience of wireless communication technologies by assisting each other in message exchange and form an interconnecting network, namely Vehicular Ad Hoc Networks (VANETs).


id: aiti-420
author: You, Rui-Wei; Fu, Yen-Pei
title: Zinc Sulfide Buffer Layer for CIGS Solar Cells Prepared by Chemical Bath Deposition
date: 2016-11-18
pages: 4
extension: .pdf
mime: application/pdf
words: 2738
sentence: 128
flesch: 72
cache: cache/aiti-420.pdf
txt: txt/aiti-420.txt
summary:
  It was found that the optimu m deposition time is 90 min for preparing ZnS thin film that is suitable as buffer layer for CuIn 1-xGaxSe2 solar cells. In this study, ZnS thin film prepared by CBD is zinc-blend type with cubic structure being in correspondence with JCPDS card


id: aiti-4155
author: Chen, Yit-Jin; Cheng-Chieh Hsiao; Anjerick Topacio
title: Side Resistance of Drilled Shafts Socketed into Rocks for Serviceability and Ultimate Limit States
date: 2020-07-01
pages: 10
extension: .pdf
mime: application/pdf
words: 3694
sentence: 218
flesch: 64
cache: cache/aiti-4155.pdf
txt: txt/aiti-4155.txt
summary:
  156-165 160 Table 2 Statistics of load test data for analysis Interpretation method n Statistical Analysis Pile Geometry qu (MPa)  fs (MPa) In addition, 81 sets of pile load data instruments were used from these load tests.


id: aiti-4278
author: Ho, Chao-Ching; Su, Eugene; Li, Po-Chieh; Bolger, Matthew J.; Pan, Huan-Ning
title: Machine Vision and Deep Learning Based Rubber Gasket Defect Detection
date: 2020-04-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3622
sentence: 192
flesch: 55
cache: cache/aiti-4278.pdf
txt: txt/aiti-4278.txt
summary:
  [11] C. C. Ho and J. J. Liu, “Development of auto defect inspection system for cell phone silicone rubber gasket,” Proc. Training and dataset for deep learning network


id: aiti-4164
author: Chen, Tzu-Hsia; Hsieh, Long-Chang
title: The Design of Mold Clamping Mechanisms with Two Dead-Position Configurations
date: 2020-01-01
pages: 12
extension: .pdf
mime: application/pdf
words: 3636
sentence: 204
flesch: 58
cache: cache/aiti-4164.pdf
txt: txt/aiti-4164.txt
summary:
  Good kinematic characteristics of mold clamping mechanism is the goal pursued by manufacturers of blow-molding machine. Good kinematic characteristics of mold clamping mechanism is the goal pursued by manufacturers.


id: aiti-384
author: Boretti, Albert
title: Changes of E-KERS Rules to Make F1 More Relevant to Road Cars
date: 2017-10-20
pages: 10
extension: .pdf
mime: application/pdf
words: 6463
sentence: 301
flesch: 70
cache: cache/aiti-384.pdf
txt: txt/aiti-384.txt
summary:
  In addition to the fuel flo w limiter placed along the fuel line, the 2014 and 2015 season have seen the introduction of a total fuel per race capped at 100 kg, or 4,450 MJ of fuel energy per race, that is certainly a driver for much better fuel economies, but not certainly that strong. In case of one lap of the Monaco Grand Prix, 3.337 km long, a F1 of curb weight 702 kg less the driver weight may use 1.28 kg or 57 MJ of fuel energy, i.e .


id: aiti-4003
author: Ebangu, Benedict Orari; Dintwa, Edward; Motsamai, Oboestwe
date: 2019-08-28
pages: 12
extension: .pdf
mime: application/pdf
words: 6341
sentence: 320
flesch: 57
cache: cache/aiti-4003.pdf
txt: txt/aiti-4003.txt
title:
  Development of a Cost-effective Design of a P-V Ventilated Greenhouse Solar Dryer for Commercial Preservation of Tomatoes in a Rural Setting

summary:
  [24] B. A. Berichte, “Experimental studies and mathematical modelling of solar drying system for production of high quality dried tomato,” pp. 1-173, 2007.D. Jain and P. B. Pathare, “Study the drying kinetics of open sun drying of fish,” Journal of Food Engineering, vol. 78, no. 4, pp. 1315-1319, February 2007. [23] M. G. S. Green, “Solar drying technology for food preservation,” GTZ-GATE, January 2011D. Brooker, “Mathematical model of the psychrometric chart,” Transactions of the ASAE, vol. 10, pp. 558-560, 1967.


id: aiti-4529
title: Nonlinear Dynamic Analysis of Direct Acting Tensioner of an Offshore Floating Platform
date: 2020-07-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3187
sentence: 209
flesch: 59
cache: cache/aiti-4529.pdf
txt: txt/aiti-4529.txt
author:
  Zong-Yu Chang; Xin Duan; Zhong-Qiang Zheng; Lin Zhao; Yu-Hu Yang; Xian-Yi Zhou; Peng Zhu; Jing-Wen He

summary:
  Dynamics modeling of the riser system The model of direct acting riser tensioner with the floating platform and riser system is shown in Fig. Scholars have carried out related researches on the performance of riser tensioners.


id: aiti-4144
author: Bonnaud, Olivier; Bsiesy, Ahmad
title: Adaptation of the Higher Education in Engineering to the Advanced Manufacturing Technologies
date: 2020-04-01
pages: 11
extension: .pdf
mime: application/pdf
words: 5559
sentence: 285
flesch: 42
cache: cache/aiti-4144.pdf
txt: txt/aiti-4144.txt
summary:
  The twelve common centres of the CNFM (red circles and red stars) manage practical training platforms and are located throughout the metropolitan area. Electronic hardware platforms (microprocessors, microcontrollers, sensors, actuators, etc.) are at the heart of the smart factory and they are provided by microelectronics industry


id: aiti-4105
author: Yeh, Chun-Lang
title: Numerical Analysis of an Industrial-Scale Steam Methane Reformer
date: 2019-06-28
pages: 12
extension: .pdf
mime: application/pdf
words: 6064
sentence: 283
flesch: 59
cache: cache/aiti-4105.pdf
txt: txt/aiti-4105.txt
summary:
  For a non-reversible reaction, the molar rate of creation/destruction of species i in reaction r is given by     j,r j,rN i,r i,r i,r f ,r j 1 j,r R̂ k C               (7) For a reversible reaction,   j,r j,rN Ni,r i,r i,r f ,r j 1 j,r b,r j 1 j,rR̂ k C k C                     (8) where 𝐶𝑗,𝑟 = molar concentration of species j in reaction r (kgmol/m 3 ) 𝜂𝑗,𝑟 ′ = rate exponent for reactant species j in reaction r 𝜂𝑗,𝑟


id: aiti-521
author: Hong, Chih-Chiang; Chang, Cheng-Long; Huang, Chun-Chen; Yang, Chi-Ching; Lin, Chien-Yu
title: CAE Analysis of Secondary Shaft Systems in Great Five-axis Turning-Milling Complex CNC Machine
date: 2017-10-20
pages: 8
extension: .pdf
mime: application/pdf
words: 3963
sentence: 252
flesch: 74
cache: cache/aiti-521.pdf
txt: txt/aiti-521.txt
summary:
  The main co mponents of secondary shaft system are screw shaft and base. 2. External pressure loads on left-end of screw shaft and hydraulic pressure loads on the base in secondary shaft system for the screw shaft locates at top position typically is also shown.


id: aiti-3953
author: Hasseni, Seif-El-Islam; Abdou, Latifa
title: Robust LPV Control for Attitude Stabilization of a Quadrotor Helicopter under Input Saturations
date: 2020-04-01
pages: 14
extension: .pdf
mime: application/pdf
words: 5926
sentence: 341
flesch: 70
cache: cache/aiti-3953.pdf
txt: txt/aiti-3953.txt
summary:
  (18)-(22), and the controller’s state space is expressed as: 1 2p px Ax B w B w B u    (18) 1 2p p pp p p pz C x D w D w D u    (19) 1 1 11 12p pz C x D w D w D u    (20) 2 2 21 22p py C x D w D w D u    (21) p pw z  (22) where x is the states vector; u is the input vector; w is the exogenous inputs; disturbances and noises; y is the measured outputs; z is the controlled outputs; pz and pw are inputs and outputs of the block, 1 1 2 2( , ,..., ).r x D y D w   (24) 1Kp Kp K Kp Kpp Kpz C x D y D w   (25) Kp Kpw z  (26) where Kx is the controller states vector, y is the outputs from the plant, u is the controller outputs, Kpz , and Kpw are inputs and outputs of the block parameter.


id: aiti-3919
author: Tsai, Chia-Chun
title: Performance Evaluation for Stacked-Layer Data Bus Based on Isolated Unit-Size Repeater Insertion
date: 2019-06-28
pages: 13
extension: .pdf
mime: application/pdf
words: 7470
sentence: 299
flesch: 63
cache: cache/aiti-3919.pdf
txt: txt/aiti-3919.txt
summary:
  If most of data access times for a program at different timing periods can be reduced a little, then its average access time will be decreased, that is, the program performance can thus be promoted. The estimation of a unit-size repeater insertion To understand the effects in data access time of a source-sink pair, it is required to make the estimation of a data access time before/after inserting a unit-size bidirectional repeater into a bus wire.


id: aiti-3795
author: Jain, Gaurav; Palwalia, Dheeraj Kumar; Mishra, Anuprita
date: 2019-06-28
pages: 20
extension: .pdf
mime: application/pdf
words: 11382
sentence: 591
flesch: 61
summary: t t t t t t t l ldk t t t t t t lk ldk
cache: cache/aiti-3795.pdf
txt: txt/aiti-3795.txt
title:
  Transmission Wheeling Pricing in Embedded Cost Using Modified Amp-Mile and MVA Utility Factor Methods


id: aiti-4136
author: Miyakoshi, Kazuki; Shun Ito; Hidetoshi Oya; Yoshikatsu Hoshi; Shunya Nagai
title: Synthesis of Formation Control Systems for Multi-Agent Systems under Control Gain Perturbations
date: 2020-04-01
pages: 14
extension: .pdf
mime: application/pdf
words: 7837
sentence: 605
flesch: 79
cache: cache/aiti-4136.pdf
txt: txt/aiti-4136.txt
summary:
  t t t t l K F F d x t x t  (12) and 6( ) F u t  is the consensus protocol given by   2 3 0 0 0 ( ) ( ) ( ) 2 ( ) ( ) ( ) ( ) ( ) 2 ( ) ( ) ( ) ( ) ( ) ( ) l F t x t u t F t F t F t x t F t F t F t x t L F t x t F t x t     


id: aiti-5476
author: Jonathan Salar Cabrera; Ariel Roy Luceño Reyes; Cindy Almosura Lasco
title: Multicriteria Decision Analysis on Information Security Policy: A Prioritization Approach
date: 2021-01-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4616
sentence: 272
flesch: 49
cache: cache/aiti-5476.pdf
txt: txt/aiti-5476.txt
summary:
  The result reflects that the DORSU implementation for information security policy is imbalanced. [1] R. Anderson, “Why Information Security is Hard: An Economic Perspective,” Proc.


id: aiti-4067
author: Tang, Kai-Yu; Hsiao, Chun-Hua; Chen, Mei-Chun
title: A Research Survey of Electronic Commerce Innovation: Evidence from the Literature
date: 2019-08-28
pages: 13
extension: .pdf
mime: application/pdf
words: 7630
sentence: 357
flesch: 52
cache: cache/aiti-4067.pdf
txt: txt/aiti-4067.txt
summary:
  Fig. 2 visualizes the distribution of EC innovation research with the number of publications, showing the publication trends of the most productive countries in EC innovation across the two phases (2000-2009 and 2010-2018). The growth of authors involved in the EC innovation research in the last five years (2014-2018, as shown in Fig. 1) is especially noteworthy, indicating the great attraction of EC innovation research to academics.


id: aiti-10419
author: Thanapong Chaichana
date: 2023-01-01
pages: 21
extension: .pdf
mime: application/pdf
words: 11719
sentence: 575
flesch: 42
cache: cache/aiti-10419.pdf
txt: txt/aiti-10419.txt
title:
  Maritime Computing Transportation, Environment, and Development: Trends of Data Visualization and Computational Methodologies

summary:
  Hence, these procedures should be simple with tractability and should strongly focus on producing maritime computational results and outputs Additionally, MC improvement mainly focuses on promoting MC to the public for an increment of MC research studies.


id: aiti-4286
author: Chang, Lin-Huang; Tsung-Han Lee; Hung-Chi Chu; Cheng-Wei Su
title: Application-Based Online Traffic Classification with Deep Learning Models on SDN Networks
date: 2020-09-01
pages: 14
extension: .pdf
mime: application/pdf
words: 6977
sentence: 352
flesch: 53
cache: cache/aiti-4286.pdf
txt: txt/aiti-4286.txt
summary:
  [15] P. Wang, F. Ye, X. Chen, and Y. Qian, “Datanet: deep learning based encrypted network traffic classification in SDN home gateway,” vol. 6, article 18174852, pp. 55380-55391, September 2018. This is mainly due to the increasing number of deep learning network layers and the volume of dataset which consequently increases the computational cost corresponding to the execution time required training a deep learning network.


id: aiti-6453
title: Outdoor Thermal Comfort Improvement of Campus Public Space
date: 2021-04-01
pages: 9
extension: .pdf
mime: application/pdf
words: 4181
sentence: 228
flesch: 58
cache: cache/aiti-6453.pdf
txt: txt/aiti-6453.txt
author:
  Rinchumphu, Damrongsak; Phichetkunbodee, Non; Pomsurin, Nakarin; Sundaranaga, Chawanat; Tepweerakun, Sarote; Chatchawan Chaichana

summary:
  3 Models showing approach for outdoor area design by ENVI-met version 4.4 program 4. 1 Aerial view of Lan Witsawa Ruamjai, Chiang Mai University Fig. 2 2D model of study area presented in ENVI-met version 4.4 Advances in Technology Innovation, vol.


id: aiti-5307
author: Wong, Tzu-Tsung; Hung, Shih-Hsuan
title: The Impact of Coating Ingredients on the Aging Resistance of Topcoat Paints by Model Trees
date: 2021-01-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4902
sentence: 264
flesch: 62
cache: cache/aiti-5307.pdf
txt: txt/aiti-5307.txt
summary:
  Keywords: accelerated aging test, linear regression, model tree, numeric prediction, topcoat paint 1. Topcoat paint can protect buildings from erosion and the function of undercoat paint is to increase the adhesion of topcoat paint.


id: aiti-6517
author: Lee, Woo-Joo ; Jhang, Hyo-Jin; Choi, Seung Hoe
title: Fuzzy Study on the Winning Rate of Football Game Betting
date: 2021-05-13
pages: 10
extension: .pdf
mime: application/pdf
words: 5914
sentence: 334
flesch: 67
cache: cache/aiti-6517.pdf
txt: txt/aiti-6517.txt
summary:
  It was found that the winning rate for KNF team was influenced by the match location, ELO rating, team performance, and match importance. Since modern football has been first introduced to Korea, KNF team has played a total of 941 games, with a winning percentage of 54.3% [11].


id: aiti-793
author: Hsieh, Chen-Huei; Zh, Xui-Ze
date: 2018-07-30
pages: 10
extension: .pdf
mime: application/pdf
words: 3981
sentence: 241
flesch: 52
cache: cache/aiti-793.pdf
txt: txt/aiti-793.txt
title:
  Development of an Automated Measurement System for Checking Irradiation Non-uniformity of Solar Simulators

summary:
  Keywords: solar simulator, PV cell, solar module, irradiation non-uniformity, measurement 1. Once the irradiation non-uniformity is calculated, some operations are made to adjust the irradiation parameters of the solar simulator such that the irradiation non-uniformity can meet the specification, i.e., 2%, 5%, 10% for class A, B or C of solar module, respectively.


id: aiti-6930
author: Nura Diana, Anita Intan; Fansuri, Subaidillah; Fatoni, Akhmad Feri
date: 2021-05-27
pages: 12
extension: .pdf
mime: application/pdf
words: 5564
sentence: 270
flesch: 61
cache: cache/aiti-6930.pdf
txt: txt/aiti-6930.txt
title:
  An Experimental Study of Plastic Waste as Fine Aggregate Substitute for Environmentally Friendly Concrete

summary:
  0 5 10 15 20 25 0% 5% 10% 15% C o m p re s s iv e s tr e n g th v a lu e ( M p a ) Variation of plastic waste Fig. 11 Compressive strength relationship and plastic waste variations 3.6. -4.981 a. Dependent variable: Compressive strength Based on Table 18, it can be analyzed that the regression equation model for the simultaneous effect on compressive strength with plastic waste variation is Y = 235.162 – 9.560 X, compressive strength without the addition of variation of plastic bottle waste is X = 0, and the value of compressive strength is (Y) = 235.162 kg/cm 2 (19.518 MPa).


id: aiti-6724
author: Bonnaud, Olivier
title: Innovative Strategy to Meet the Challenges of the Future Digital Society
date: 2021-04-01
pages: 11
extension: .pdf
mime: application/pdf
words: 5532
sentence: 280
flesch: 41
cache: cache/aiti-6724.pdf
txt: txt/aiti-6724.txt
summary:
  Indeed, designers and manufacturers have tried in the past to bring new products with new functions to the market as quickly as possible, regardless of energy consumption and environmental impact. Energy consumption challenges The consequence of this exponential growth is that the energy consumed by connected objects is also growing exponentially and is becoming globally preponderant


id: aiti-419
author: Ko, Kuk Won; Lee, Sangjoon
title: Biosignal –Based Multimodal Biometric System
date: 2016-11-18
pages: 6
extension: .pdf
mime: application/pdf
words: 3421
sentence: 160
flesch: 69
cache: cache/aiti-419.pdf
txt: txt/aiti-419.txt
summary:
  We manufac- tured a bio-signal measure ment system that can simu ltaneously measure ECG and PPG signals, using which three channels of ECG signal and one channel of PPG signal we re acquired fro m the right-hand index finger of a total of 33 su b- sets for 3 minutes. PPG signals are bio-signals that are lin ked with ECG signals, and also represent the state of b lood vessels of the subject with heart contraction.


id: aiti-803
author: Machacek, Josef; Pichal, Radek
title: Single-Crossarm Stainless Steel Stayed Columns
date: 2018-01-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4192
sentence: 207
flesch: 62
cache: cache/aiti-803.pdf
txt: txt/aiti-803.txt
summary:
  [8] R. R. Araujo, S. A. L. Andrade, P. C. G. S. Vellasco, J. G. S. Silva, and L. R. O. Lima, “Experimental and numerical as sessment of stayed steel columns ,” Journal of Constructional Steel Research, vol. Received 05 June 2017; received in revised form 04 July 2017; accept ed 11 August 2017 Abstract Stability and strength of imperfect stayed columns are studied in 3D using ANSYS software.


id: aiti-7835
author: Nguyen, Manh Tien; Nguyen, Truong An ; Tran, Duc Hoan; Le, Van Thao
date: 2021-08-17
pages: 11
extension: .pdf
mime: application/pdf
words: 4933
sentence: 329
flesch: 59
cache: cache/aiti-7835.pdf
txt: txt/aiti-7835.txt
title:
  Optimization of Superplastic Forming Process of AA7075 Alloy for the Best Wall Thickness Distribution

summary:
  The SPF by compressed air pressure depends on many parameters such as forming pressure, deformation temperature, forming time, tool size, coefficient of friction, back pressure, etc. 1 Schematic diagram of the sheet SPF process As shown in Table 1, the limits of variables are denoted as -1, 0, and +1 for the lower value, middle value, and higher value, and the input variables are denoted as A for forming pressure (MPa), B for deformation temperature (°C), and C for forming time (min).


id: aiti-4284
author: Jia-Shing Sheu; Chen-Yin Han
date: 2020-01-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3109
sentence: 174
flesch: 56
cache: cache/aiti-4284.pdf
txt: txt/aiti-4284.txt
title:
  Combining Cloud Computing and Artificial Intelligence Scene Recognition in Real-time Environment Image Planning Walkable Area

summary:
  To achieve to mark walkable areas and relative coordinates, this study is divided into three parts: (1) The first part constitutes neural network object identification. The walkable area determined using the system, marked by BLUE COLOR Table 2 presents the detail of the detection, we chosen Google’s Tensorflow Object detection API “faster_rcnn_ inception_resnet_v2_atrous_coco” frozen model as object detection model, “ssd_mobilenet_v1_coco,” and “ssd_mobilenet Advances in Technology Innovation, vol.


id: aiti-4027
author: Lien, Cheng-Chang; Lin, Wei-Cheng
title: A Biogas Desulphurization System with Water Scrubbing
date: 2019-08-28
pages: 7
extension: .pdf
mime: application/pdf
words: 3908
sentence: 178
flesch: 56
cache: cache/aiti-4027.pdf
txt: txt/aiti-4027.txt
summary:
  The H2S detecting device (120-SM, Kitagawa, Japan) is used to measure the H2S concentration versus water scrubbing time, in order to calculate the removal H2S efficiency of water scrubbing and desulphurization. From the test results, it showed that the removal efficiency of H2S was 47.7% in 30 minutes of water scrubbing time under 120 ℓ of total water amount, 80 cm of water level in the water scrubbing cylinder, 20 ℓ/min of internal circulation water flow rate and 10 ℓ/min of external circulation water flow rate, and 25 ℓ/min of biogas flow rate.


id: aiti-4380
author: Chih-Chiang Hong
date: 2020-04-01
pages: 14
extension: .pdf
mime: application/pdf
words: 8692
sentence: 446
flesch: 78
cache: cache/aiti-4380.pdf
txt: txt/aiti-4380.txt
title:
  Free Vibration Frequency of Thick FGM Circular Cylindrical Shells with Simply Homogeneous Equation by Using TSDT

summary:
                                              [1] presented the free vibration of FGM circular cylindrical shells, including the Pasternak foundation and stationary fluid by using the first order shear deformation theory (FSDT).


id: aiti-415
author: Simon, Vilmos
title: Advanced Manufacture of Spiral Bevel and Hypoid Gears
date: 2016-11-18
pages: 7
extension: .pdf
mime: application/pdf
words: 4201
sentence: 197
flesch: 68
cache: cache/aiti-415.pdf
txt: txt/aiti-415.txt
summary:
  Manufacture of Spiral Bevel and Hypoid Gears on Cradle-Type Generator The concept of an imag inary generating crown gear is used in the gen erating cutting process of the face -hobbed spiral bevel and hypoid pinion and gear teeth (Fig. 1). In this study, an advanced method for the manufacture of spiral bevel and hypoid gears on CNC hypoid generators is proposed.


id: aiti-7309
author: Wariyatno, Nanang Gunawan ; Lie, Han Ay ; Hsiao, Fu-Pei ; Gan, Buntara Sthenly
title: Design Philosophy for Buildings’ Comfort-Level Performance
date: 2021-05-27
pages: 12
extension: .pdf
mime: application/pdf
words: 5641
sentence: 316
flesch: 61
cache: cache/aiti-7309.pdf
txt: txt/aiti-7309.txt
summary:
  Introduction Japan is susceptible to strong earthquakes and volcanic eruptions owing to its location at the junction of four active tectonic plates: the Pacific, North American, Eurasian, and Philippine plates. Keywords: comfort-level, seismic intensity level (SIL), quantification, earthquake, design philosophy 1.


id: aiti-4167
author: I-Ming Chao; Hsiung, Shou-Cheng; Jenn-Long Liu
date: 2020-07-01
pages: 9
extension: .pdf
mime: application/pdf
words: 4453
sentence: 272
flesch: 63
cache: cache/aiti-4167.pdf
txt: txt/aiti-4167.txt
title:
  Improved Whale Optimization Algorithm Based on Inertia Weights for Solving Global Optimization Problems

summary:
  To conclude the literature review; different inertia weight strategies may get various incremental changes in a better solution. From the literature review, different inertia weight strategies are known to get different changes in solution [2, 11].


id: aiti-4123
author: Wang, Yu-Shun; He, Ling-Song ; Gao, Zhi-Qiang ; Wang, Jun-Feng ; Cao, Yang-Fan
title: Remote Monitoring for the Operation Status of CNC Machine Tools Based on HTML5
date: 2019-08-28
pages: 9
extension: .pdf
mime: application/pdf
words: 3857
sentence: 191
flesch: 49
cache: cache/aiti-4123.pdf
txt: txt/aiti-4123.txt
summary:
  On the one hand, it added visualization of tool position data and tool trajectory during monitoring, always feedback the current artifact appearance to the monitor, and could view the artifact in all directions by dragging and zooming. In addition, it helped to grasp the information of CNC machine tool conditions at all times, which reduced the difficulty of subsequent fault analysis and diagnosis.


id: aiti-417
author: Bahatmaka, Aldias; Kim, Dong Joon; Chrismianto, Deddy
title: Optimization of Ducted Propeller Design for the ROV (Remotely Operated Vehicle) using CFD
date: 2016-11-18
pages: 12
extension: .pdf
mime: application/pdf
words: 4781
sentence: 245
flesch: 78
cache: cache/aiti-417.pdf
txt: txt/aiti-417.txt
summary:
  The results of pressure contour from type A nozzle for B-series (B5-75) shown in Fig. 20, type A nozzle for Kaplan-series (Ka 5-75) shown in Fig. 21, type B nozzle for B-series (B5-75) shown in Fig. 22, type B nozzle for Kaplan-series (Ka 5-75) shown in Fig. 23, type C nozzle for B-series (B5-75) shown in Fig. 24, type A nozzle for Kaplan-series (Ka5-75) shown in Fig. 25. 3. The comparison of propeller types such as B-Series (B5-75) and Kaplan-series (Ka5-75) shows that Kaplan-series (Ka 5-75) has stronger thrust than B-series (B5-75) and the strea mline simulation shows these results also.


id: aiti-421
author: Liu, Louis Wai Yip
title: Harvesting Atmospheric Ions Using Surface Electromagnetic Wave Technologies
date: 2017-05-09
pages: 6
extension: .pdf
mime: application/pdf
words: 4839
sentence: 287
flesch: 65
cache: cache/aiti-421.pdf
txt: txt/aiti-421.txt
summary:
  The ions from the proposed negative ion source contribute to a potential differ- ence which can be further increased by connecting the pro- posed negative ion source in series. There have been published reports on the link between lack of negative ions in the body and ailments, including headaches, and/or fatigue


id: aiti-4148
author: Madhusudan Raghavan
title: Optimizing Engine Start Systems with Application to Sailing/Coasting and Mild Hybridization
date: 2020-01-01
pages: 9
extension: .pdf
mime: application/pdf
words: 4429
sentence: 233
flesch: 60
cache: cache/aiti-4148.pdf
txt: txt/aiti-4148.txt
summary:
  [14] M. Raghavan, N. Bucknor, and V. Donikian, “The kinematics and dynamics of engine start systems,” in IFToMM [11] M. Canova, Y. Guezennec, and S. Yurkovich, “On the control of engine start/stop dynamics in a hybrid Electric vehicle,” ASME Journal of Dynamic Systems Measurement and Control, vol.


id: aiti-3918
author: Shaw, Heiu-Jou; Tzu, Fu-Ming
title: The Strategy of Energy Saving for Smart Shipping
date: 2019-06-28
pages: 12
extension: .pdf
mime: application/pdf
words: 5827
sentence: 317
flesch: 64
cache: cache/aiti-3918.pdf
txt: txt/aiti-3918.txt
summary:
  Second, an EEOI-based strategy for ship energy management is presented. 12 Profile of average draft and trim with respect to ME fuel consumption Fig.


id: aiti-808
author: Chen, Tzu-Hsia; Hsieh, Long-Chang
title: The Innovative Design of the Massage Mechanisms for Massage Chair
date: 2019-03-18
pages: 9
extension: .pdf
mime: application/pdf
words: 3010
sentence: 179
flesch: 64
cache: cache/aiti-808.pdf
txt: txt/aiti-808.txt
summary:
  10 Atlas of feasible massage mechanisms of (5, 5) generalized chain (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) Fig. 11 Atlas of feasible designs for massage mechanism of (6, 6) generalized chain Advances in Technology Innovation, vol. [8] H. S. Yan, “A methodology for creative mechanism design,” Mechanism and Machine Theory, vol.


id: aiti-3960
author: Meryem, Bachar; Ahmed, Naddami; Ahmed, Fahli
date: 2019-06-28
pages: 15
extension: .pdf
mime: application/pdf
words: 5140
sentence: 346
flesch: 64
cache: cache/aiti-3960.pdf
txt: txt/aiti-3960.txt
title:
  Photovoltaic Power Control Using Fuzzy Logic and Fuzzy Logic Type 2 MPPT Algorithms and Buck Converter

summary:
  The studied system consists of PV array, DC/DC converter, MPPT controller, batteries and load. The PV Voltage with InC, FL, and FLT2 MPPT algorithms Fig.


id: aiti-4099
author: Pham, Vu Nam; Nguyen, Dinh Kien; Gan, Buntara Sthenly
date: 2019-06-28
pages: 13
extension: .pdf
mime: application/pdf
words: 6649
sentence: 287
flesch: 66
cache: cache/aiti-4099.pdf
txt: txt/aiti-4099.txt
title:
  Vibration Analysis of Two-Directional Functionally Graded Sandwich Beams Using a Shear Deformable Finite Element Formulation

summary:
  The element contains six degrees of freedom per node, and the vector of nodal displacements is given by { } T u wb ws d d d d (12) where 1 2 1 , 1 2 , 2 1 , 1 2 , 2 { }, { }, { } u wb b b x b b x ws s s x s s x u u w w w w w w w w  d d d (13) are, respectively, the vectors of axial displacements, bending and shear transverse displacements at node 1 and node 2. The mass sub-matrices in the above equation are obtained by twice differentiation of the kinetic energy with respect to the associated nodal velocities and they have the following forms   11 12 , 11 , 34 ,x2 ( 2 x 2) ( 2 x 4) ( 2 x 4)0 0 0 11 ,x 22 ,x 11 ,x 44 ,x2 ( 4 x 4)( 4 x 4) 0 0 11 ( 4 x 4) 4 , , , 3 4 , , 3 1 b s b b l l l T T T T uu u u uw u w x uw w w u x w l l T T T T m m w w w w bs w w w w T ss w w I dx


id: aiti-3946
author: Wu, Chien-Min; Kao, Yen-Chun; Chang, Kai-Fu
title: A Multichannel MAC Protocol for IoT-enabled Cognitive Radio Ad Hoc Networks
date: 2020-01-01
pages: 11
extension: .pdf
mime: application/pdf
words: 5540
sentence: 320
flesch: 65
cache: cache/aiti-3946.pdf
txt: txt/aiti-3946.txt
summary:
  if PU active on equals data channel then. These questions include avoiding interference with channel use by PUs, switching between PU channels, and ensuring QoS.


id: aiti-5294
author: Korniejenko, Kinga; Michał Łach; Maria Hebdowska-Krupa; Janusz Mikuła
title: Impact of Flax Fiber Reinforcement on Mechanical Properties of Solid and Foamed Geopolymer Concrete
date: 2021-01-01
pages: 10
extension: .pdf
mime: application/pdf
words: 5638
sentence: 333
flesch: 56
cache: cache/aiti-5294.pdf
txt: txt/aiti-5294.txt
summary:
  Keywords: geopolymer, mechanical properties, foamed material, flax fiber 1. The results show the positive effect of the addition to flax fibers on impact bending and flexural strength [38].


id: aiti-6863
author: Wang, Tianyi; Okada, Shima; Makikawa, Masaaki ; Endo, Masayuki; Ohno, Yuko
title: Influence of Cold Sensation on Plantar Tactile Sensation for Young Females
date: 2021-04-01
pages: 7
extension: .pdf
mime: application/pdf
words: 3926
sentence: 216
flesch: 63
cache: cache/aiti-6863.pdf
txt: txt/aiti-6863.txt
summary:
  In [2], we reported that plantar sensation thresholds were higher for the CS group (n = 18) than the non-CS group (n = 11) and that young females with CS were less sensitive at the foot than the healthy subjects. Left part is the result of sensation threshold, and the right part is the result of response frequency.


id: aiti-5385
author: Zhang, Ye; Zhang, Kun; Chen, Kaidi; Xu, Zhen
title: Real Time Scanning-Modeling System for Architecture Design and Construction
date: 2020-09-01
pages: 11
extension: .pdf
mime: application/pdf
words: 4562
sentence: 273
flesch: 51
cache: cache/aiti-5385.pdf
txt: txt/aiti-5385.txt
summary:
  Architectural form is mainly decided by the designer, while material data is often treated as an afterthought which doesn’t factor in decision-making directly. Keywords: scanning-modeling system, material data, computational design, robotic construction 1.


id: aiti-7192
author: Wang, Po-Tong; Lin, Shao-Yu; Sheu, Jia-Shing
title: Vehicle Path Planning with Multicloud Computation Services
date: 2021-08-17
pages: 9
extension: .pdf
mime: application/pdf
words: 4397
sentence: 272
flesch: 63
cache: cache/aiti-7192.pdf
txt: txt/aiti-7192.txt
summary:
  Keywords: computer vision, scene recognition, cloud computing, object detection 1. Obstacle detection can also performed by object detection, and the technique algorithm will be used to mark walkable areas and relative coordinates [20-21].


id: aiti-813
author: Lien, Cheng-Chang; Ting, Ching-Hua
title: Piglets Comfort with Hot Water by Biogas Combustion under Controllable Ventilation
date: 2018-02-20
pages: 8
extension: .pdf
mime: application/pdf
words: 4507
sentence: 135
flesch: 48
cache: cache/aiti-813.pdf
txt: txt/aiti-813.txt
summary:
  Forced ventilat ion of 1.7 A CH (air change rate per hour) at 28°C could keep the pigsty comfort in terms of indoor temperature, relative humidity, and carbon -dioxide concentration. mid ity for its right front (RF), right rear (RR), le ft front (LF), le ft rear (LR), right front down (RFD) and right rear down (RRD) Temperature (°C) Air change rate per hour (ACH) Relative humility (%) Air change rate per hour (ACH) 1.7 ACH 3.4 ACH 5.1 ACH 1.7 ACH 3.4 ACH 5.1 ACH RF 30.17±0.86 *1 29.57±0.84 30.09±0.74 RF 66.76±9.69 75.71±9.21 65.37±7.37 RR 28.29±0.39 28.71±0.40 28.24±0.28 RR 77.05±6.30 81.67±6.02 77.23±4.57 LF 29.93±0.73 29.44±0.71 - *2 LF 69.26±9.05 77.91±8.74 - *2 LR 28.32±0.44 28.82±0.43 28.02±0.30 LR 84.96±8.92 86.37±2.77 83.40±2.05 RFD 27.03±0.52 27.71±0.53 27.12±0.43 RFD 87.41±3.74 89.29±4.57


id: aiti-804
author: Tsai, Ming-June; Lung, Hsueh-Yung
title: Point-Structured Human Body Modeling Based on 3D Scan Data
date: 2017-10-20
pages: 8
extension: .pdf
mime: application/pdf
words: 4231
sentence: 251
flesch: 70
cache: cache/aiti-804.pdf
txt: txt/aiti-804.txt
summary:
  Recently, a novel method of body feature e xtract ion fro m a ma rke r -less scanned body was presented [10-11], in which the description of human body features are interpreted into logica l mathemat ical defin itions. In order to e xt ract these feature lines and feature points fro m the 3D scanned point cloud automatica lly, the se mantic definit ions of body features are needed to be interpreted into the mathemat ical definit ions.


id: aiti-5645
author: Chen, Fu-Chen; Tzeng, Yih-Fong; Hsu, Meng-Hui
title: Innovative Design of an Elliptical Trainer with Right Timing of the Foot Trajectory
date: 2020-07-01
pages: 12
extension: .pdf
mime: application/pdf
words: 5846
sentence: 293
flesch: 67
cache: cache/aiti-5645.pdf
txt: txt/aiti-5645.txt
summary:
  From the vector loop diagram of the innovative elliptical trainer mechanism in Fig. 4, the following two vector loop equations can be derived as: 2 4 1r r r 0   (1) 5 6 7 8 9r r r r r 0     (2) Decomposing the vectors in Eq. B ( ) 7 9 5 52r r r sin (38) 2 2 2 2 2 5 6 7 8 9 5 8 5 5 9 5C r r r r r 2r r cos 2r r cos        (39)


id: aiti-4072
author: Chen, Wen-Chin; Lin, Pao-Wen ; Lin, Shi-Bo ; Lin, Kuan-Ming ; Chang, Yun-Ru
title: An Intelligent Optimization System of Micro Electroforming Process for the Mesh Filter
date: 2019-08-28
pages: 11
extension: .pdf
mime: application/pdf
words: 6216
sentence: 258
flesch: 48
cache: cache/aiti-4072.pdf
txt: txt/aiti-4072.txt
summary:
  the process parameter (control factor), yod is the output value of diameter quality predictor after de-normalization, and yot is the output value of thickness deviation quality predictor after de-normalization, and 555 is the target value of diameter quality characteristic, and 0.01 is the target value of thickness deviation quality characteristic as smaller as possible. The factor response chart shows that a set of Taguchi optimal process parameter combination can be obtained to meet the multiple quality characteristics.


id: aiti-4142
author: Nguyen, Ngoc-Duc; Choi, Hyeung-Sik; Jin, Han-Sol; Jiafeng Huang; Lee, Jae-Heon
title: Robust Adaptive Depth Control of Hybrid Underwater Glider in Vertical Plane
date: 2020-07-01
pages: 12
extension: .pdf
mime: application/pdf
words: 5509
sentence: 257
flesch: 67
cache: cache/aiti-4142.pdf
txt: txt/aiti-4142.txt
summary:
  Tq eqV k e e e e Y a a P a         (19) 2 2 2 2 2 1 2 2 ˆ ˆ ( )q eq e Y a k e e k sat        (20) Substituting the control law (20) into the first derivative of the Lyapunov function (19) will result to: 2 2 12 2 1 1 2 2 2 2 2 2 2 2 2 2 2 2 ˆ ˆ( ) ( )eq eq e V k e k e k e sat e e Y a a P a           (21) By choosing the adaption law as �̇̂� = −𝑃2𝑌2 𝑇 𝑒2, the derivative of 𝑉2can be derived as: 2 2 2 2 1 1 2 2 2 2 2 2 ˆ( ) ( )eq eq e V k e k e k e sat e         (22)       (9) where 33   qym I M (10) 2 ( ) ( ) ( )sin ( )cos            g g w w q u g


id: aiti-805
author: Nascu, Ioana; Nascu, Ioan
title: Improving Activated Sludge Wastewater Treatment Process Efficiency Using Predictive Control
date: 2018-02-20
pages: 11
extension: .pdf
mime: application/pdf
words: 6199
sentence: 373
flesch: 67
cache: cache/aiti-805.pdf
txt: txt/aiti-805.txt
summary:
             (22) 1 ( 1) 1 0 1 ( ) ( ) ( ) [ ( ) ... ] The results show that this control strategy can be efficiently used for dissolved oxygen control in WWTP.


id: aiti-4138
author: Hwai-Tsu Hu; Ying-Hsiang Lu
title: Frame-synchronous Blind Audio Watermarking for Tamper Proofing and Self-Recovery
date: 2020-01-01
pages: 15
extension: .pdf
mime: application/pdf
words: 7784
sentence: 501
flesch: 63
cache: cache/aiti-4138.pdf
txt: txt/aiti-4138.txt
summary:
  2 Arrangement of watermark bits 4.2. Compared to the lengthy computation required in the embedding process, the time spent on watermark extraction is greatly reduced while extracting watermark bits from the 2 nd and 3 rd detail subbands using AQIM.


id: aiti-6666
author: Chen, Shang-Yuan; Chen, Tzu-Tien
title: Dockless Shared Bicycle Flow Control by Using Kernel Density Estimation Based Clustering
date: 2021-04-12
pages: 11
extension: .pdf
mime: application/pdf
words: 5918
sentence: 300
flesch: 60
cache: cache/aiti-6666.pdf
txt: txt/aiti-6666.txt
summary:
  As a consequence, this study relies on observations and analysis of dockless shared bicycles in Shanghai, China to gain a better understanding of dockless shared bicycles and methods of improving their effectiveness, as well as specific methods of making them more acceptable to city residents and a more important means of transportation. The following explains the clustering principles of the docking and dockless shared bicycles, and the differences between the two.


id: aiti-810
author: S. Syan, Chanan; Ramsoobag, Geeta
date: 2018-07-30
pages: 10
extension: .pdf
mime: application/pdf
words: 5299
sentence: 252
flesch: 56
cache: cache/aiti-810.pdf
txt: txt/aiti-810.txt
title:
  A Differential Evolution Optimization Approach for Parameters Estimation of Truncated and Censored Failure Time Data

summary:
  This work outlines an investigation into the use of Heuristic techniques to estimate the parameters of a stochastic life distribution by using failure data with Truncation and Censoring. This approach was applied to failure data of a Gas Engine Power Generator utilized in Offshore Gas Production.


id: aiti-445
author: Sofi, Shabir Ahmad; Naaz, Roohie
date: 2017-05-09
pages: 6
extension: .pdf
mime: application/pdf
words: 5390
sentence: 306
flesch: 71
cache: cache/aiti-445.pdf
txt: txt/aiti-445.txt
title:
  Securing Ad Hoc Wireless Sensor Networks under Byzantine Attacks by Implementing Non-Cryptographic Methods

summary:
  Algorithm dedicated cluster head Assumption is that cluster heads are pre assigned with identified cluster nodes . The goal of the By z- antine node is to disrupt the communicat ion of other nodes in the network, without regard to its own resource co n- sumption.


id: aiti-4288
author: Bidyarani Devi, Mutum; Rajagopalan Devanathan
title: Evaluation of Pan-Sharpening Techniques Using Lagrange Optimization
date: 2020-07-01
pages: 16
extension: .pdf
mime: application/pdf
words: 8201
sentence: 504
flesch: 67
cache: cache/aiti-4288.pdf
txt: txt/aiti-4288.txt
summary:
  (3), and the fifth step consists of applying the proposed two cases of fusion methods to the dataset with the respective means of the band added to the deviations (Eq s. (6)-(16)). Simulation results of the proposed method and comparison with other fusion methods based on several evaluation criteria are discussed in Section 5.


id: aiti-4793
author: Yassin-Kassab, Hamed ; Marius-Corneliu Rosu
title: An Overview of Own Tracking Wireless Sensors with GSM-GPS Features
date: 2021-01-01
pages: 20
extension: .pdf
mime: application/pdf
words: 9140
sentence: 479
flesch: 54
cache: cache/aiti-4793.pdf
txt: txt/aiti-4793.txt
summary:
  [27] Y. Zhu, K. Sundaresan, and R. Sivakumar, “Practical Limits on Achievable Energy Improvements and Useable Delay Tolerance in Correlation Aware Data Gathering in Wireless Sensor Networks,” Second Conference IEEE SECON, Santa Clara, CA, USA, 2005, pp. [42] L. Jun and J. P. Hubaux, “Joint Mobility and Routing for Lifetime Elongation in Wireless Sensor Networks,” Proceedings of 24th Annual Joint Conference of the IEEE Computer and Communications Societies, vol. 3, pp.


id: aiti-6494
author: Chung, Yi-Hua; Jun-Fu Huang; Yuan-Chen Hu; Huang, Chen-Kang
title: Development of a Small Intelligent Weather Station for Agricultural Applications
date: 2021-04-01
pages: 16
extension: .pdf
mime: application/pdf
words: 8358
sentence: 408
flesch: 59
cache: cache/aiti-6494.pdf
txt: txt/aiti-6494.txt
summary:
  For future work, we hope to increase the amount of lightning data by trying to use multiple weather boxes to collect data in the same area at the same time. As the high density of the orange dots that denote raining between the humidity of 70% and80% in the humidity- pressure graph in Fig. 10, this situation implies that the prediction models might have had the wrong prediction in this zone caused by the high density.


id: aiti-7988
author: Mohmmed, Jabbar Hussein; Tawfik, Mauwafak Ali; Atiyah, Qasim Abbas
date: 2021-10-06
pages: 15
extension: .pdf
mime: application/pdf
words: 7666
sentence: 424
flesch: 63
cache: cache/aiti-7988.pdf
txt: txt/aiti-7988.txt
title:
  Determination of Natural Frequency and Critical Velocity of Inclined Pipe Conveying Fluid under Thermal Effect by Using Integral Transform Technique

summary:
  (6) can be rewritten in non-dimensional form as follows: ( ) 4 2 2 2 2 1 2 4 2 2 1 sin sin cos 2 0G N U G G U t t φ φ φ φ φ ζ θ θ θ β ζ ζ ζ ζ ∂ ∂ ∂ ∂ ∂ − − − − + ′ ′Γ Λ − − −


id: aiti-8492
author: Lee, Changro
title: Clustering Analysis with Embedding Vectors: An Application to Real Estate Market Delineation
date: 2021-11-30
pages: 11
extension: .pdf
mime: application/pdf
words: 6245
sentence: 348
flesch: 52
cache: cache/aiti-8492.pdf
txt: txt/aiti-8492.txt
summary:
  Clustering is a de facto standard tool employed in unsupervised learning and is extensively used as a technique for discovering hidden patterns in data, such as consumer groups based on demographic profiles, or real estate submarkets based on property characteristics [5]. This study attempts to construct real estate submarkets by exploiting the entity embedding approach.


id: aiti-818
author: Smejkal, Vladimír; Kodl, Jindřich
title: Dynamic Biometric Signature - an Effective Alternative for Electronic Authentication
date: 2018-07-30
pages: 13
extension: .pdf
mime: application/pdf
words: 7361
sentence: 345
flesch: 51
cache: cache/aiti-818.pdf
txt: txt/aiti-818.txt
summary:
  Keywords: biometric authentication methods, dynamic biometric signature, electronic signature, authentication 1. [4] V. Smejkal and J. Kodl, “Strong authentication using dynamic biometric signature,” Proc. of 45th Annual 2011 IEEE International Carnahan Conf.


id: aiti-9227
author: Ngoc, Tran Thanh; Dai, Le Van; Minh, Lam Binh
date: 2022-07-18
pages: 12
extension: .pdf
mime: application/pdf
words: 5846
sentence: 291
flesch: 61
cache: cache/aiti-9227.pdf
txt: txt/aiti-9227.txt
title:
  Effects of Data Standardization on Hyperparameter Optimization with the Grid Search Algorithm Based on Deep Learning: A Case Study of Electric Load Forecasting 

summary:
  The values of the optimal hyperparameters for the DL model Hyperparameter LSTM model CNN model Epoch (E) 100, 300, 500 300, 500, 700 Batch (B) 10, 30, 50 30, 50, 70 Optimizer (O) Adadelta, Adam, Adamax Adagrad, Adam, SGD Dropout rate (D) 0.1, 0.3, 0.5 - Filter (F) - 48, 80, 112 Kernel (K) - 3, 5, 7 Number of combinations (CFG) 81 243 4. [2] K. Amasyali, et al., “A Review of Data-Driven Building Energy Consumption Prediction Studies,” Renewable and Sustainable Energy Reviews, vol.


id: aiti-7330
author: Dang Vu, Hiep; Phan, Duy Nguyen
date: 2021-06-30
pages: 13
extension: .pdf
mime: application/pdf
words: 8010
sentence: 380
flesch: 67
cache: cache/aiti-7330.pdf
txt: txt/aiti-7330.txt
title:
  Experimental and Theoretical Analysis of Cracking Moment of Concrete Beams Reinforced with Hybrid Fiber Reinforced Polymer and Steel Rebars 

summary:
  To overcome this drawback of FRP RC beams, many researchers proposed combining traditional steel bars to FRP bars in the tension zone of the concrete beam. By considering the recommendations in [20], the steel and FRP reinforcement ratios are selected to vary from 0% to a maximum 4% (i.e, the area of each type of reinforcements varies from 0 cm 2 to 67.2 cm 2 ).


id: aiti-9252
author: Hayakawa, Satoshi; Hoshi, Yoshikatsu; Oya, Hidetoshi
date: 2022-06-09
pages: 14
extension: .pdf
mime: application/pdf
words: 6880
sentence: 470
flesch: 78
cache: cache/aiti-9252.pdf
txt: txt/aiti-9252.txt
title:
  Observer-Based Quadratic Guaranteed Cost Control for Linear Uncertain Systems with Control Gain Variation 

summary:
  [13] proposed a design method for �� control for linear systems with addition control gain variation. A G C SΨ = +θ θ (39) 2 2 2 1 ( ) ( ) ( ) 1 G T T T T e e e e n e e T e e A S S


id: aiti-8933
author: Mohd Sani, Mohd Syahrul Hisyam; Muftah, Fadhluhartini; Mohsan, Nor Maslina; Kado, Bishir
title: Behavior of Built-Up Cold-Formed Steel Stub Columns Infilled with Washed Bottom Ash Concrete
date: 2022-03-14
pages: 13
extension: .pdf
mime: application/pdf
words: 6724
sentence: 331
flesch: 62
cache: cache/aiti-8933.pdf
txt: txt/aiti-8933.txt
summary:
  CFS channel section is clean and clear before starting by checking the material properties of the section using a coupon tensile test specimen. There are four parts of the testing conducted: material properties of CFS, material properties of WBA concrete, mechanical properties of the connection, and mechanical behavior of built-up CFS stub columns.


id: aiti-8308
author: Barreto, Fabian; Sarvaiya, Jignesh; Patnaik, Suprava
title: Learning Representations for Face Recognition: A Review from Holistic to Deep Learning
date: 2022-08-05
pages: 16
extension: .pdf
mime: application/pdf
words: 8853
sentence: 597
flesch: 53
cache: cache/aiti-8308.pdf
txt: txt/aiti-8308.txt
summary:
  [4] L. Sirovich, et al., “Low-Dimensional Procedure for the Characterization of Human Faces,” Journal of the Optical Society of America A, vol. 4, pp. [5] M. Ballantyne, et al., “Woody Bledsoe:


id: aiti-8098
author: Tayade, Vinod Pralhad; Lahudkar, Swapnil Laxman
date: 2021-10-05
pages: 11
extension: .pdf
mime: application/pdf
words: 6647
sentence: 392
flesch: 69
cache: cache/aiti-8098.pdf
txt: txt/aiti-8098.txt
title:
  Implementation of 20 nm Graphene Channel Field Effect Transistors Using Silvaco TCAD Tool to Improve Short Channel Effects over Conventional MOSFETs

summary:
  Graphene FETs are one of the alternatives of MOSFETs due to the excellent properties of graphene material. The mobility of graphene material is high, and hence it can be used as a channel material for small geometry devices.


id: aiti-8618
author: Gopikuttan, Lasithan Lasyam; Veettil, Shouri Puthan; Govindan, Rajesh Vazhayil
title: Maintenance Initiation Prediction Incorporating Vibrations and System Availability
date: 2022-03-11
pages: 14
extension: .pdf
mime: application/pdf
words: 8728
sentence: 439
flesch: 54
cache: cache/aiti-8618.pdf
txt: txt/aiti-8618.txt
summary:
  The proposed model creates the wear in the raceways of the bearing of a Class I machine intentionally, and the resultant vibrations above the alert limit can be measured and recorded using vibration measurement systems. This curve can be used to explain various stages of system failure, i.e., failure initiation (I), potential failure (P), and functional failure (F).


id: aiti-7853
author: Karami, Ali
date: 2021-08-17
pages: 16
extension: .pdf
mime: application/pdf
words: 9389
sentence: 544
flesch: 63
cache: cache/aiti-7853.pdf
txt: txt/aiti-7853.txt
title:
  A Recursive Least-Squares Approach with Memorizing Factor for Deriving Dynamic Equivalents of Power Systems

summary:
  The connection of a local machine to a multimachine system Letting ��� ≅ �� − �� and denoting the elements of matrix ���� as ��� = ��� + � ��, the active power and reactive power of the ith machine can be expressed as follows [32]: 2 1 ( cos sin ) n j i − − − = (9) where !�� is the input mechanical power (assumed constant), � is the rotor inertia constant, and #� is the natural damping coefficient of the ith machine.


id: aiti-8739
author: Kollipara, Vamshi ; Peddakrishna, Samineni
title: Circularly Polarized Antennas Using Characteristic Mode Analysis: A Review
date: 2022-03-08
pages: 16
extension: .pdf
mime: application/pdf
words: 8767
sentence: 495
flesch: 56
cache: cache/aiti-8739.pdf
txt: txt/aiti-8739.txt
summary:
  From a future perspective, if CP antennas can fulfill the needs of long-distance communication as done by high gain linearly polarized antennas, the CM-based approach becomes attractive in antenna designs. Studies have also indicated how to optimize CP antenna designs for two linear modes using MTS.


id: aiti-816
date: 2018-02-20
pages: 8
extension: .pdf
mime: application/pdf
words: 3935
sentence: 238
flesch: 70
cache: cache/aiti-816.pdf
txt: txt/aiti-816.txt
author:
  Ferng, Sophia; Ting, Ching-Hua; Wu, Chien-Ping; Lu, Yung-Tsong; Hsu, Cheng-Kuang; Chiou, Robin Yih-Yuan

title:
  Energy-effective Predictive Temperature Control for Soy Mash Fermentation Based on Compartmental Pharmacokinetic Modelling

summary:
  Heat energy is supplied fro m Co mpart ment 3 to Co mpart ment 1 via water circulation. The ambient te mperature is the key factor that influences the effic iency of heat pump operation [11].


id: aiti-811
author: Tsai, Shu-Yao; Lin, Hsiang-Yu; Lu, Guan-Yi; Lin, Chun-Ping
date: 2017-10-20
pages: 9
extension: .pdf
mime: application/pdf
words: 4707
sentence: 231
flesch: 58
cache: cache/aiti-811.pdf
txt: txt/aiti-811.txt
title:
  Prediction Primary Available Blend Biodiesel of Waste Oil from Aurantiochytrium sp. for General Diesel Engines

summary:
  Keywords: waste oil, Aurantiochytrium sp., biodiesel, winterization, blend biodiesel 1. Here, the heat of combustion, kinematic viscosity, and storage safety of blend biodiesel were tested by DSC


id: aiti-806
author: Raghavan, Madhusudan; He, Yong Sheng
title: A Comparison of Automotive Waste Heat Recovery Systems
date: 2018-07-30
pages: 11
extension: .pdf
mime: application/pdf
words: 4835
sentence: 241
flesch: 58
cache: cache/aiti-806.pdf
txt: txt/aiti-806.txt
summary:
  Keywords: waste heat recovery systems, turbo-compounding, organic Rankine cycle, thermoelectrics 1. Introduction Fig. There have been numerous prior studies on waste heat recovery systems based on thermoelectric generators (TEGs) for potential automotive applications.


id: aiti-819
author: Chiang, Ching-Shoei; Li, Hung-Chieh
title: Area-Construction Algorithms Using Tangent Circles
date: 2020-04-01
pages: 9
extension: .pdf
mime: application/pdf
words: 4761
sentence: 279
flesch: 74
cache: cache/aiti-819.pdf
txt: txt/aiti-819.txt
summary:
  In addition, the circle packing problems, i.e., the arrangement of circles with same or different radii inside a specified area, were also investigated by researchers [9-11]. Given n distinct ordered points pi, where i = 0, …, n, a set of circles has to be found, Ci, whose circles are centered at these points pi, and each circle is tangent to its neighboring circles.


id: aiti-9080
author: Nastain; Suripin; Yuwono, Nur; Sriyana, Ignatius
title: Wave Transmission and Energy Dissipation in a Box Culvert-Type Slotted Breakwater
date: 2022-06-08
pages: 9
extension: .pdf
mime: application/pdf
words: 4329
sentence: 223
flesch: 64
cache: cache/aiti-9080.pdf
txt: txt/aiti-9080.txt
summary:
  However, no attention has been paid to the cross-sectional shape of the hole used, despite the important effect of the hole height (hL) and length (B) on the performance of a perforated breakwater in reducing wave height (Hi) and incident wave energy (Ei). Furthermore, the use of a box culvert-type with a relatively large hole length (B) is expected to increase the effectiveness of the breakwater in reducing wave height and energy with a large hole porosity (ε).


id: aiti-9235
author: Boyapati Bharathidevi; Jayendra Kumar
title: Effect of PIN Diode Integration on Patch Antennas for Frequency Reconfigurable Antenna Applications
date: 2023-07-04
pages: 9
extension: .pdf
mime: application/pdf
words: 4381
sentence: 229
flesch: 48
cache: cache/aiti-9235.pdf
txt: txt/aiti-9235.txt
summary:
  Keywords: biasing circuit, microstrip antenna, PIN diode switch, reconfigurable antenna, RF switch 1.  Advances in Technology Innovation, vol. 8, no. 3, 2023, pp. 210-218 English language proofreader: Chih-Wen Teng Effect of PIN Diode Integration on Patch Antennas for Frequency Reconfigurable Antenna Applications Boyapati Bharathidevi, Jayendra Kumar* School of Electronics Engineering, VIT-AP University, Amaravathi, Andhra Pradesh, India Received 10 January 2022; received in revised form 05 August 2022; accepted 04 May 2023 DOI: https://doi.org/10.46604/aiti.2023.9235 Abstract PIN diodes are commonly used to design reconfigurable antennas owing to their sufficient isolation, lower cost, and ease of fabrication.


id: aiti-8714
author: Bui Manh, Cuong ; Nguyen Van, Duong; Do Van, Si ; Phan Van, Manh; Le, Van Thao
title: Effects of the Vibration Amplitude in Vibratory Stress Relief on the Fatigue Life of Structures
date: 2021-12-24
pages: 10
extension: .pdf
mime: application/pdf
words: 5070
sentence: 282
flesch: 61
cache: cache/aiti-8714.pdf
txt: txt/aiti-8714.txt
summary:
  Residual stress and fatigue limit The results of measuring residual stress according to ASTM E837-13a include a variety of stress components. This research aims to investigate the effects of vibration amplitude in vibratory stress relief (VSR) on the fatigue strength of structures with residual stress.


id: aiti-8364
author: Nusrat Jahan Prottasha; Anik Tahabilder; Md Kowsher; Md Shanon Mia; Khadiza Tul Kobra
title: Short-Term Rainfall Prediction Using Supervised Machine Learning
date: 2023-04-01
pages: 10
extension: .pdf
mime: application/pdf
words: 5074
sentence: 283
flesch: 56
cache: cache/aiti-8364.pdf
txt: txt/aiti-8364.txt
summary:
  Therefore, rain prediction accuracy may vary depending on the dataset characteristics. For this reason, various machine learning classifiers have been implemented.


id: aiti-8504
author: Srilatha, Madhunala ; Bharathi, Anantha
date: 2022-03-14
pages: 12
extension: .pdf
mime: application/pdf
words: 5554
sentence: 291
flesch: 58
cache: cache/aiti-8504.pdf
txt: txt/aiti-8504.txt
title:
  Low Access Latency and High Throughput for Full-Duplex Cognitive Radio Using Mobility Caching Placement Strategy

summary:
  (24) where Ni is the number of samples when PU begins with i th decision point, Di denotes the event when PU is detected at i th decision once transmission starts, and ��� represents the complementary event when PU is not detected during ith decision. In the above equation, ���� is the signal which needs to be identified, ���� is the Gaussian noise which is additive white in nature, and n is the sample index.


id: aiti-8909
author: Seba, Mohamed Rida; Kebdani, Said
date: 2022-03-14
pages: 12
extension: .pdf
mime: application/pdf
words: 5860
sentence: 329
flesch: 62
cache: cache/aiti-8909.pdf
txt: txt/aiti-8909.txt
title:
  Finite Element and Neural Network Based Predictive Model to Determine Natural Frequency of Laminated Composite Plates with Eccentric Cutouts under Free Vibration

summary:
  Based Predictive Model to Determine Natural Frequency of Laminated Composite Plates with Eccentric Cutouts under Free Vibration Mohamed Rida Seba * , Said Kebdani Applied Mechanics Laboratory, Faculty of Mechanical Engineering, University of Science and Technology Oran Mohamed-Boudiaf, Oran, Algeria Received 12 November 2021; received in revised form 29 December 2021; accepted 30 December 2021 DOI: https://doi.org/10.46604/aiti.2022.8909 Abstract This research proposes a predictive model to identify changes in the mechanical and geometrical properties of composite plates with eccentric cutouts based on natural frequency. Conclusions In this study, a neural-network-based approach is proposed to assess changes in the geometrical and mechanical properties of composite plates through the prediction of natural frequency.


id: aiti-9854
author: Jerome Jordan Faz Famadico
title: Building Information Modeling in the Architecture and Construction Industry
date: 2023-04-01
pages: 15
extension: .pdf
mime: application/pdf
words: 7655
sentence: 397
flesch: 49
cache: cache/aiti-9854.pdf
txt: txt/aiti-9854.txt
summary:
  4.4. Approaches to implementing BIM Based on Table 4, respondents suggested that the AEC industry must increase the availability of BIM technologies and software to implement BIM. (4) The most common practices or approaches in addressing the challenges of BIM implementation were: increasing the availability of BIM technology, establishing BIM execution guidelines, innovating research for BIM technology, organizing the transition process from traditional practice to BIM, and conducting workshops on BIM.


# url

id: aiti-179
domain: xueshu.baidu.com
url:
  http://xueshu.baidu.com/s?wd=author%3a%28nasir%2c%20s.m.%29%20&tn=se_baiduxueshu_c1gjeupa&ie=utf-8&sc_f_para=sc_hilight%3dperson


id: aiti-310
domain: www.intechopen.com
url:
  http://www.intechopen.com/books/diesel-engine-combustion-emissions-and-condition-monitoring/nox-storage-and-reduction-for-diesel-engine-exhaust-aftertreatment#f1


id: aiti-2521
domain: www.gartner.com
url:
  http://www.gartner.com/smarterwithgartner/control-the-connected-home-with-virtual-personal-assistants


id: aiti-2530
domain: 3dprintingindustry.com
url:
  https://3dprintingindustry.com/news/wasp-saving-the-world-with-3d-printed-splints-cranial-implants-49019/


id: aiti-177
domain: www.google.ro
url:
  https://www.google.ro/search?newwindow=1&sa=n&hl=ro&biw=1476&bih=770&tbm=bks&tbm=bks&q=inauthor:%22reza+katebi%22&ved=0ahukewijnzr89rxjahwh_q4khcbbcreq9agiajaj


id: aiti-177
domain: www.google.ro
url:
  https://www.google.ro/search?newwindow=1&sa=n&hl=ro&biw=1476&bih=770&tbm=bks&tbm=bks&q=inauthor:%22jacqueline+wilkie%22&ved=0ahukewijnzr89rxjahwh_q4khcbbcreq9agibdaj


id: aiti-2523
domain: www.panoramio.com
url:
  http://www.google.co.uk/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahukewjbrq7x--xmahxjarqkhvkoa0uqjrwibw&url=http://www.panoramio.com/photo/23176377&psig=afqjcngtsigt8tuugzpmiuutij4dvvqfvw&ust=1463741361896792


id: aiti-5645
domain: ieeexplore.ieee.org
url:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22yongbin%22&searchwithin=%22last%20name%22:%22qi%22&newsearch=true&sorttype=newest


id: aiti-5645
domain: ieeexplore.ieee.org
url:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22cheong%20boon%22&searchwithin=%22last%20name%22:%22soh%22&newsearch=true&sorttype=newest


id: aiti-5645
domain: ieeexplore.ieee.org
url:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22erry%22&searchwithin=%22last%20name%22:%22gunawan%22&newsearch=true&sorttype=newest


id: aiti-5645
domain: ieeexplore.ieee.org
url:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22kay-soon%22&searchwithin=%22last%20name%22:%22low%22&newsearch=true&sorttype=newest


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.stephen%20j.%20polly.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.zachary%20s.%20bittner.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.mitch%20f.%20bennett.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.ryne%20p.%20raffaelle.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.seth%20m.%20hubbard.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.mingjiao%20sun.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.guoyu%20zhang.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.bin%20yang.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.xue%20tao.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.guipeng%20ding.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.yafei%20yuan.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.yiqiang%20yang.qt.&newsearch=true


id: aiti-793
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.zhang%20ya.qt.&newsearch=true


id: aiti-6724
domain: www.economie.gouv.fr
url:
  https://www.economie.gouv.fr/signature-contrat-comite-strategique-filiere-industrie-electronique-plan-nano-2022


id: aiti-6724
domain: fr.statista.com
url:
  https://fr.statista.com/statistiques/584481/internet-des-objets-nombre-d-appareils-connectes-dans-le-monde--2020


id: aiti-8308
domain: www.who.int
url:
  https://www.who.int/director-general/speeches/detail/who-director-general-s-opening-remarks-at-the-media-briefing-oncovid-19---11-march-2020


id: aiti-805
domain: ieeexplore.ieee.org
url:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.grigore%20vlad.qt.&newsearch=true


# ent

id: aiti-368
sid: 161
eid: 7
type: ORG
entity:
  http://pubs.acs.org/journal/jpcafh http://www.springerlink.com/content/?author=s.+mrowec http://www.springerlink.com/content/?author=k.+przybylski http://pubs.acs.org/journal/jpcafh http://pubs.acs.org/journal/jpcafh http://www.sciencedirect.com/science/article/pii/s0950423009000916 http://www.sciencedirect.com/science/article/pii/s0950423009000916


id: aiti-2521
sid: 90
eid: 1
type: ORG
entity:
  http://www.gartner.com/smarterwithgartner/transform-business-outcomes-with-immersive-technology/ http://www.gartner.com/smarterwithgartner/enterprise-architects-define-digital-platforms/ http://www.gartner.com/smarterwithgartner/enterprise-architects-define-digital-platforms/


id: aiti-2521
sid: 114
eid: 1
type: PERSON
entity:
  http://www.gartner.com/smarterwithgartner/artificial-intelligence-and-the-enterprise/ http://www.gartner.com/smarterwithgartner/the-road-to-connected-autonomous-cars/


id: aiti-2521
sid: 114
eid: 2
type: PERSON
entity:
  http://www.gartner.com/smarterwithgartner/control-the-connected-home-with-virtual-personal-assistants/ http://www.gartner.com/it-glossary/human-augmentation/


id: aiti-2521
sid: 115
eid: 1
type: PERSON
entity:
  http://www.gartner.com/it-glossary/vr-virtual-reality/ http://www.gartner.com/it-glossary/volumetric-displays/ http://www.gartner.com/it-glossary/volumetric-displays/


id: aiti-2521
sid: 116
eid: 1
type: ORG
entity:
  http://www.gartner.com/it-glossary/quantum-computing/ http://www.gartner.com/it-glossary/quantum-computing/ http://www.gartner.com/smarterwithgartner/5g-whos-in-the-drivers-seat/


id: aiti-11508
sid: 291
eid: 4
type: ORG
entity:
  “uji eksperimental kuat tekan mortar paving block dengan bahan limbah substitusi agregat halus dan semen


id: aiti-3919
sid: 295
eid: 6
type: PERSON
entity:
  rp22 cb rb tb rb cb t b cb rb tb rb cb tb cb rb tb rb cb tb cb rb tb rb cb tb cb rb tb rb cb t b cb rb tb rb cb tb cb rb tb rb cb tb cb rb tb rb cb cb rb tb rb cb cb rb tb rb cb cb rb tb rb cb t b cb rb t b rb cb t b cb rb t b rb cb t b cb rb tb rb cb t


id: aiti-5645
sid: 293
eid: 1
type: ORG
entity:
  https://www.scientific.net/author/jenq_huey_shyu_1 https://www.scientific.net/author/ching_kong_chen https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22yongbin%22&searchwithin=%22last%20name%22:%22qi%22&newsearch=true&sorttype=newest https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22cheong%20boon%22&searchwithin=%22last%20name%22:%22soh%22&newsearch=true&sorttype=newest


id: aiti-793
sid: 273
eid: 1
type: ORG
entity:
  http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.yafei%20yuan.qt.&newsearch=true http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.yiqiang%20yang.qt.&newsearch=true http://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22authors%22:.qt.zhang%20ya.qt.&newsearch=true http://ieeexplore.ieee.org/xpl/mostrecentissue.jsp?punumber=6030004 http://ieeexplore.ieee.org/xpl/mostrecentissue.jsp?punumber=6030004 https://store.arduino.cc/usa/arduino-mega-2560-rev3


id: aiti-4793
sid: 429
eid: 1
type: PERSON
entity:
  https://www.u-blox.com/sites/default/files/products/documents/ leon-g1_datasheet_%28ubx-13004887%29.pdf


# pos

id: aiti-2521
sid: 114
tid: 5
pos: PROPN
token:
  http://www.gartner.com/smarterwithgartner/control-the-connected-home-with-virtual-personal-assistants/

lemma:
  http://www.gartner.com/smarterwithgartner/control-the-connected-home-with-virtual-personal-assistants/


id: aiti-5645
sid: 293
tid: 5
pos: ADJ
token:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22erry%22&searchwithin=%22last%20name%22:%22gunawan%22&newsearch=true&sorttype=newest

lemma:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22erry%22&searchwithin=%22last%20name%22:%22gunawan%22&newsearch=true&sorttype=new


id: aiti-5645
sid: 293
tid: 6
pos: ADJ
token:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22kay-soon%22&searchwithin=%22last%20name%22:%22low%22&newsearch=true&sorttype=newest

lemma:
  https://ieeexplore.ieee.org/search/searchresult.jsp?searchwithin=%22first%20name%22:%22kay-soon%22&searchwithin=%22last%20name%22:%22low%22&newsearch=true&sorttype=new


id: aiti-6724
sid: 221
tid: 26
pos: PROPN
token:
  https://fr.statista.com/statistiques/584481/internet-des-objets-nombre-d-appareils-connectes-dans-le-monde--2020/

lemma:
  https://fr.statista.com/statistiques/584481/internet-des-objets-nombre-d-appareils-connectes-dans-le-monde--2020/


