item: #1 of 148
          id: aiti-10034
      author: Tong Sy Tien; Nguyen Thi Minh Thuy; Vu Thi Kim Lien; Nguyen Thi Ngoc Anh; Do Ngọc Bich; Le Quang Thanh
       title: Calculation of Temperature-Dependent Thermal Expansion Coefficient of Metal Crystals Based on Anharmonic Correlated Debye Model
        date: 2023-01-01
       words: 4464
      flesch: 58
     summary: 1 Thermal expansion of metal with a change in temperature The TE coefficient can be determined [11-12] by: ( ) ( ) ( ) ( ) 1 0 0 0 T dr T d T T T r dT r dT σ α ∆ = = ∆ ℓ ≃ ℓ (1) where � is the absolute temperature, ���� is the instantaneous distance between the backscattering and absorbing atoms, �� is the equilibrium distance between the backscattering and absorbing atoms, and � � ���� is the first EXAFS cumulant and can be expressed in terms of the power moments of the radial pair distribution (RD) function (5) where �� ( 1i = , 2) is the mass of the ith atom and equals m in the monatomic crystals, respectively, � = � ��/�� + ��� is the reduced mass of the absorber and backscatter, ��� is a unit vector, the sum i is the over absorbers ( 1i = ) and backscatters ( 2i = ), the sum j is over the nearest neighbors, and.
    keywords: acd; anharmonic; coefficient; crystals; model; results; temperature; vol
       cache: aiti-10034.pdf
  plain text: aiti-10034.txt

        item: #2 of 148
          id: aiti-1010
      author: A. Johnson, Gabriel; J. French, Jesse
       title: Evaluation of Infill Effect on Mechanical Properties of Consumer 3D Printing Materials
        date: 2018-07-30
       words: 2810
      flesch: 60
     summary: Table 1 Approximate material properties of printed materials, taken from various sources Material Density The PLA, ABS, PETG, and Nylon materials were printed from nominal 2.85mm printer filament, while the ASA and PC/ABS were printed from nominal 1.75mm printer filament.
    keywords: abs; fig; infill; materials; mpa; tensile
       cache: aiti-1010.pdf
  plain text: aiti-1010.txt

        item: #3 of 148
          id: aiti-1011
      author: E. Keith, Amber; French, Jesse J.
       title: Design and Testing of a Remote Deployable Water Purification System Powered by Solar Energy
        date: 2019-01-01
       words: 2942
      flesch: 57
     summary: Keywords: renewable energy, solar power, clean water, water purification, self-sufficient 1. Introduction Without water, a person will die of dehydration within three days [4]. An estimated 315,000 children die each year from diarrheal diseases caused by lack of clean water and poor sanitation [2].
    keywords: battery; fig; liters; power; purification; system; water
       cache: aiti-1011.pdf
  plain text: aiti-1011.txt

        item: #4 of 148
          id: aiti-1018
      author: Bonnaud, Olivier; Danto, Yves; Kuang, Ying-Hui; Yuan, Li
       title: International Flipped Class for Chinese Honors Bachelor Students in the Frame of Multidisciplinary Fields: Reliability and Microelectronics
        date: 2018-03-01
       words: 3502
      flesch: 50
     summary: The subjects of the presenta tion and of the short report cover the most important aspects of the field, i.e., the evolution of the integration, the development of new technologies, the extension of the field of applications, more especially in the evolution of the connecting objects and of internet of things (IoT) on the following topics for the microelectronics field:  new technologies for the future integration ,  evolution of MEMS,  large area electronics ,  microelectronics for telecommunications,  connecting Object for Environment Application  the substrates for integrated microelectronics and solar cells . These two subjects are therefore part of the objectives for students and the challenge is to choose the best pedagogical way to acquir e these skill.
    keywords: approach; microelectronics; reliability; students; systems; technologies; technology
       cache: aiti-1018.pdf
  plain text: aiti-1018.txt

        item: #5 of 148
          id: aiti-1020
      author: Bakowski, M.; Lang, J.; Lim, J-K.; Hellén, J.; Nilsson, T.M.J.; Schodt, B.; Poder, R.; Belov, I.; Leisner, P.
       title: Reliability Study of GaN-on-SiC HEMT RF Power Amplifiers
        date: 2018-07-30
       words: 3428
      flesch: 65
     summary: Keywords: GaN-on SiC, HEMT, RF power amplifier, thermo-mechanical and electrical reliability 1. The objectives of this investigation are to experimentally investigate thermo-mechanical robustness of RF power amplifiers including packaged HEMT devices assembled on PCB boards and exposed to power cycling (PC) and thermal cycling (TC) and to evaluate prospective thermal management methods including thermal interface materials (TIM) by experiment and simulation.
    keywords: boards; current; cycles; devices; fig; power; voltage
       cache: aiti-1020.pdf
  plain text: aiti-1020.txt

        item: #6 of 148
          id: aiti-1023
      author: Wu, Chun-Hui; Yan, Yih-Her; Shu, Kuen-Ming
       title: Projecting the Mental Model of Social Networking Site Usage
        date: 2017-10-20
       words: 3440
      flesch: 50
     summary: Keywords : social networking sites, projective technique, Zaltman metaphor elicitation technique, mental model, means -end chain theory 1. In ternet found that nearly 80 percent of online adults used social networking sites, and almost 88% of teens and young adults were a member of at least one social network
    keywords: means; networking; participants; research; sites; users; vol; zmet
       cache: aiti-1023.pdf
  plain text: aiti-1023.txt

        item: #7 of 148
          id: aiti-1024
      author: Rutledge, Judah; French, Jesse J.
       title: Design and Analysis of a Water Channel for Characterization of Low Reynolds Number Flows
        date: 2018-03-01
       words: 4452
      flesch: 64
     summary: Therefore, the pump head, 𝐻(𝑄), had to be incorporated into the iterative solution for channel flow . 4 Hydrostatic pressure on water channel panel In most of the channel design, the limit ing factor was not structural integrity, but was instead deflection.
    keywords: analysis; channel; deflection; fig; flow; fro; head; pipe; rate; stress; tank; water
       cache: aiti-1024.pdf
  plain text: aiti-1024.txt

        item: #8 of 148
          id: aiti-1026
      author: Hsu, Hsiang-Chen; Wang, Shaw-Yuan; Chu, Li-Ming
       title: A Study on Aluminum Pad Large Deformation during Copper Wirebonding for High Power IC Package
        date: 2018-02-20
       words: 3009
      flesch: 63
     summary: Another issue is more bonding power and higher working temperature required in Cu wire bonding process. Because the complete mechanism of the wire bonding process includes z-motion, impact and ultrasonic vibration stages [9-10], many material properties of bond wire were scarcely realized.
    keywords: bond; fig; pad; process; stress; wire; wirebonding
       cache: aiti-1026.pdf
  plain text: aiti-1026.txt

        item: #9 of 148
          id: aiti-1027
      author: Pasam, Vamsi Krishna; Rapeti, Padmini; Babu Battula, Surendra
       title: Efficacy of Nanocutting Fluids in Machining-an Experimental Investigation
        date: 2018-02-20
       words: 3871
      flesch: 52
     summary: Thus it can be inferred that vegetable oil based nanofluids are more efficient in reducing cutting temperatures . Vegetable oil based cutting fluids exhibited better performance t han mineral oils by way of tool life, tool wear, cutting forces and chip formation
    keywords: cccnt; cutting; machining; nanofluids; oil; surface; tool; vol; wear
       cache: aiti-1027.pdf
  plain text: aiti-1027.txt

        item: #10 of 148
          id: aiti-1030
      author: Lin, Sheam-Chyun; Lin, Yu-Ming; Haung, Yu-Song; Yao, Cheng-Liang; Jian, Bo-Syuan
       title: Flowfield Analysis of a Pneumatic Solenoid Valve
        date: 2018-03-01
       words: 3834
      flesch: 60
     summary: [12] R. Farrell, L. I. Ezekoye, and M. Rain, “Check valve flow and disk lift simulation using cfd ,” 2017 Pressure Vessels and Piping Conf. For ensuring the safety of human being, the reliable and effect ive solenoid valve is in great de mand to shorten the reaction time and thus becomes the topic of this research.
    keywords: cfd; fig; flow; nozzle; numerical; pressure; solenoid; system; valve; vessel; vol
       cache: aiti-1030.pdf
  plain text: aiti-1030.txt

        item: #11 of 148
          id: aiti-1031
      author: Huang, Yi-Cheng; Zheng, Jing-Hong
       title: Ball Nut Preload Diagnosis of the Hollow Ball Screw through Support Vector Machine
        date: 2018-02-20
       words: 2593
      flesch: 59
     summary: The method is testified by considering the us e of ball screw pretension and different ball nut preload. Compen sated positioning technique by ball screw pretension with 5μ and 20μ was not significantly contaminated by CNC 30 minutes operation time by linear SVM prognostic diagnosis when the ball nut preload was 4 %.
    keywords: ball; minutes; nut; preload; screw; svm;  
       cache: aiti-1031.pdf
  plain text: aiti-1031.txt

        item: #12 of 148
          id: aiti-1034
      author: Rosu, Marius Corneliu; Yassin-Kassab, Hamed; Iliesiu, Adriana; Georgica Obreja, Serban
       title: A GI Proposal to Display ECG Digital Signals Wirelessly Real-time Transmitted onto a Remote PC
        date: 2018-03-01
       words: 3782
      flesch: 52
     summary: The ECG signal is transmitted from the Router Se nsor (RS) to an end Coordinator Node (CN) plugged -in to the laptop via USB port; RS acquires ECG signal in analogical mode, and is also responsible with sampling, quantization and sending it wirelessly direct to CN. From these, ECG signal is graph transposition of heart electrical activity, and the mechanical activity of the heart is somewhat regular with the exception of being patients with Cardiovascular Disease (CVD), so ECG may be considered a quasi-periodic waveforms .
    keywords: bio; data; ecg; format; matlab; signal; technology; time; vol
       cache: aiti-1034.pdf
  plain text: aiti-1034.txt

        item: #13 of 148
          id: aiti-1035
      author: Wankhar, Syrpailyne; A. Kota, Albert; Selvaraj, Dheepak
       title: A Novel Stretch Sensor to Measure Venous Hemodynamics
        date: 2018-03-01
       words: 3094
      flesch: 66
     summary: Measurement of venous volume using the novel stretch sensor We calculated venous volume (VV), venous filling index (VFI), ejection fraction (EF) and residual venous volume (RVF) on two normal subjects (1male, 1female) and two patients (2 males). In this paper, we demonstrate the measurement of venous volume using arrays of the novel stretch sensor and thereby enable us in developing a novel prototype instrument for measuring venou s hemodynamic.
    keywords: change; sensor; stretch; venous; volume
       cache: aiti-1035.pdf
  plain text: aiti-1035.txt

        item: #14 of 148
          id: aiti-10419
      author: Thanapong Chaichana
       title: Maritime Computing Transportation, Environment, and Development: Trends of Data Visualization and Computational Methodologies
        date: 2023-01-01
       words: 11719
      flesch: 42
     summary: Hence, these procedures should be simple with tractability and should strongly focus on producing maritime computational results and outputs Additionally, MC improvement mainly focuses on promoting MC to the public for an increment of MC research studies.
    keywords: analysis; cfd; commercial; computing; conditions; data; design; development; engineering; environment; marine; maritime; model; ocean; research; results; ship; simulation; studies; study; technology; transportation; vol
       cache: aiti-10419.pdf
  plain text: aiti-10419.txt

        item: #15 of 148
          id: aiti-10525
      author: Widjajakusuma, Jack; Bali, Ika; Ng, Gino Pranata; Wibowo, Kevin Aprilio
       title: An Experimental Study on the Mechanical Properties of Low-Aluminum and Rich-Iron-Calcium Fly Ash-Based Geopolymer Concrete
        date: 2022-07-27
       words: 3858
      flesch: 56
     summary: The average compressive strength of geopolymer concrete reaches 38.2 MPa, which is 13% lower than normal concrete. The split tensile and compressive strengths of geopolymer concrete are 9.27% and 8.54%, while the split tensile and compressive strengths of normal concrete are 10.87% and 13.77%, respectively (Table 3).
    keywords: ash; concrete; fig; fly; geopolymer; strength; vol
       cache: aiti-10525.pdf
  plain text: aiti-10525.txt

        item: #16 of 148
          id: aiti-10548
      author: Lee, Jae-Yong; Son, Nam-Sun
       title: On the Estimation of the Mission Performance Index of Unmanned Surface Vehicles Based on the Mission Coverage Area 
        date: 2023-01-01
       words: 3502
      flesch: 61
     summary: Y value converted from Ltij of j th trajectory point in ith USV d(i)j m Distance between USV trajectories; ����� = ������ − ���� � �� + ������ − ����� � �� Td(i)j m Total distance of USV trajectory; ������ = ∑ ���� �� j Cat(i) m2 Total USV trajectory area; ������ = ������ × ���� W(i)xj m X of j th waypoint for ith USV W(i)yj m
    keywords: area; mission; mpi; path; ship; usv
       cache: aiti-10548.pdf
  plain text: aiti-10548.txt

        item: #17 of 148
          id: aiti-10658
      author: Van Thao Le; Dinh Si Mai; Van Thuc Dang; Duc Manh Dinh; Thi Hong Cao; Van Anh Nguyen
       title: Optimization of Weld Parameters in Wire and Arc-Based Directed Energy Deposition of High Strength Low Alloy Steels
        date: 2023-01-01
       words: 5217
      flesch: 63
     summary: (2): ˆ worst ij j ij best worst j j m m m m m − = − (2) where �� �� is the normalized value of the �� alternative for ��� attribute, �� ���� and �� ����� are the best and worst values of ��� attribute. [14] V. T. Le, Q. H. Hoang, V. C. Tran, D. S. Mai, D. M. Dinh, and T. K. Doan, “Effects of Welding Current on the Shape and Microstructure Formation of Thin-Walled Low-Carbon Parts Built By Wire Arc Additive Manufacturing,” Vietnam Journal of Science and Technology, vol.
    keywords: arc; manufacturing; process; variables; vol; waded; wire
       cache: aiti-10658.pdf
  plain text: aiti-10658.txt

        item: #18 of 148
          id: aiti-11232
      author: Xian Wen Sim; Sie Long Kek; Sy Yi Sim; Jiao Li
       title: State Estimation and Optimal Control of Four-Tank System with Stochastic Approximation Approach
        date: 2023-04-01
       words: 6056
      flesch: 65
     summary: Denote ��, ��, ��, and �� as the liquid level of tanks 1, 2, 3, and 4, respectively, while �� and �� are the flow parameters of pumps 1 and 2. Fig. A A γ− = − + (18) Define the state variable � = ���, ��, ��, ��� � with �� = ��, �� = �� , �� = ��, and �� = �� , and let the control variable � = ���, ��� � with �� = �� and �� = ��, the dynamics of the four-tank system in Eqs.
    keywords: control; liquid; state; system; tank; ℛ �; � �
       cache: aiti-11232.pdf
  plain text: aiti-11232.txt

        item: #19 of 148
          id: aiti-11508
      author: Noor A’fiana Desyani; Arief Sabdo Yuwono; Heriansyah Putra
       title: Assessing the Performance of Melted Plastic as a Replacement for Sand in Paving Block
        date: 2023-07-04
       words: 5312
      flesch: 70
     summary: The potential of melted plastic as a sand substitute in paving blocks was investigated in this study. Paving blocks were made with 1 Portland cement and 4 sand aggregates [18].
    keywords: absorption; blocks; compressive; mixture; paving; plastic; quality; sand; strength; vol; waste; water
       cache: aiti-11508.pdf
  plain text: aiti-11508.txt

        item: #20 of 148
          id: aiti-1152
      author: Hong, Chih-Chiang
       title: Effects of Unsteady Aerodynamic Pressure Load in the Thermal Environment of FGM Plates
        date: 2018-03-01
       words: 5029
      flesch: 72
     summary: In 2006, Prakash and Ganapathi [10] investigated supersonic flutter behavior of FGM plates and flat panels by using the FEM . The properties of indiv idual constituent material of FGM a re functions of enviro nment te mperature T. The time-dependent, linear FSDT equations of displacements u, vand w\ of FGM plates are assumed in the following [19]. ),,(),,( 0 tyxztyxuu x  (1) ),,(),,( 0 tyxztyxvv y  ),,( tyxww  where u 0 and v 0 a re d isplacements in the x and y a xes direction, respectively, w is t ransverse displacement in the z a xis direction of the middle-plane of plates,  x and  y are the shear rotations, t is time.
    keywords: center; deflection; fgm; plates; vol
       cache: aiti-1152.pdf
  plain text: aiti-1152.txt

        item: #21 of 148
          id: aiti-11638
      author: Jhonatan A. Becerra-Duitama; Mauricio Mauledoux; Óscar F. Avilés
       title: Design of an Adiabatic Calorimeter for Cementitious Mixtures by Multi-Objective Optimization
        date: 2023-07-04
       words: 5472
      flesch: 54
     summary: [5] J. S. Xia, M. K. Khabaz, I. Patra, I. Khalid, J. R. N. Alvarez, A. Rahmanian, et al., “Using Feed-Forward Perceptron Artificial Neural Network (ANN) Model to Determine the Rolling Force, Power and Slip of the Tandem Cold Rolling,” ISA Transactions, vol. 132, pp. 353-363, January 2023. [10] K. A. Riding, J. Vosahlik, K. Bartojay, C. Lucero, A. Sedaghat, A. Zayed, et al., “Methodology Comparison for Concrete Adiabatic Temperature Rise,” ACI Materials Journal, vol. 116, no. 2, pp. 45-53, 2019.
    keywords: algorithm; calorimeter; cement; design; fig; heat; objective; optimization; system; temperature; vol
       cache: aiti-11638.pdf
  plain text: aiti-11638.txt

        item: #22 of 148
          id: aiti-11678
      author: Karishma Agrawal; Supachai Vorapojpisut
       title: A Hidden Semi-Markov Model for Predicting Production Cycle Time Using Bluetooth Low Energy Data
        date: 2023-07-20
       words: 6115
      flesch: 63
     summary: with �ABCBD�BE end end �EJKL� MN �1: �FG���@HABCBD�BE � � �ABCBD�BE � � O�, �EJKL� MN P � � O�, @P end 4.2. The constraint for � ��� is that the sum of � ��� from � � 1 to D is equal to 1 for all states �
    keywords: ble; data; hsmm; probability; production; rssi; state; time
       cache: aiti-11678.pdf
  plain text: aiti-11678.txt

        item: #23 of 148
          id: aiti-11957
      author: Jin-Siang Shaw; Yi-Hua Huang
       title: Virtual Modeling of an Industrial Robotic Arm for Energy Consumption Estimation
        date: 2023-08-11
       words: 5217
      flesch: 53
     summary: Keywords: digital twin, robotic arm, Unity, Euler-Lagrange equation, energy consumption 1. Although the simulation of a robotic arm in ROS using Moveit, Gazebo, and Rviz is quite common, no cases have been found that utilize the ROS framework in constructing a digital twin model capable of estimating energy consumption for robotic arms.
    keywords: arm; case; consumption; energy; fig; model; robot; twin; vol
       cache: aiti-11957.pdf
  plain text: aiti-11957.txt

        item: #24 of 148
          id: aiti-155
      author: Lee, Kuo-Long; Chien, Shih-Bin; Pan, Wen-Fung
       title: The Effect of the Curvature-Rate on the Response of Local Sharp-Notched SUS304 Stainless Steel Tubes under Cyclic Bending
        date: 2016-07-01
       words: 3012
      flesch: 73
     summary: 4 Experimentally determined mo ment (M) - curvature () curve for local sharp- notched SUS304 stainless steel tube, with notch depth of a = 0.2 mm, subjected to cyclic bending under the curvature-rate o f 0.035 m -1 s -1 Figs. 5(a)-(b) present experimentally determined mo ment (M) - curvature () curve for local sharp-notched SUS304 stainless steel tubes , with notch depth of a = 0.2 mm, subjected to cyclic bending under the curvature-rate of 0.0035 and 0.35 m -1 s -1 , respectively. 01 - 06 4 Copyright © TAETI (a) (b) Fig. 5 Experimentally determined mo ment (M) - curvature () curve for local sharp- notched SUS304 stainless steel tubes , with notch depth of a = 0.2 mm, subjected to cyclic bending under the curvature- rates o f (a) 0.0035 and (b) 0.35
    keywords: bending; curvature; cyclic; tubes
       cache: aiti-155.pdf
  plain text: aiti-155.txt

        item: #25 of 148
          id: aiti-156
      author: Wang, Shyi-Wen
       title: Benefit Analysis of Emergency Standby System Promoted to Cogeneration System
        date: 2016-07-01
       words: 3058
      flesch: 67
     summary: 24 (13) Step 6: Print out the optima l operation schedule, operation benefit, daily ma ximu m de mand, and then stop the process. Where i: time interval PSi: pseudo switch used to indicate the on/off (1/0) status of CGS during time interval i OC(PGi, HGi): operation cost of the CGS during time interval i (NT$/h) PGi: output power of the CGS during time interval i (kWh)
    keywords: benefit; capacity; cgs; cost; fig; operation; optima; sample; system; time
       cache: aiti-156.pdf
  plain text: aiti-156.txt

        item: #26 of 148
          id: aiti-157
      author: Airoldi, Alessandro; Bettini, Paolo; Boiocchi, Matteo; Sala, Giuseppe
       title: Composite Elements for Biomimetic Aerospace Structures with Progressive Shape Variation Capabilities
        date: 2016-07-01
       words: 1566
      flesch: 55
     summary: For such reasons, chiral topologies were proposed to develop the internal structure of morph ing airfoils [ 1], but manufacturing of chiral honeycombs represent a critical proble m for application to rea l world structures. Composite Corrugated Laminates The development of morphing surfaces always requires the development of a fle xib le skin to collect ae rodynamic forces .
    keywords: chiral; composite; fig; structures; vol
       cache: aiti-157.pdf
  plain text: aiti-157.txt

        item: #27 of 148
          id: aiti-1573
      author: Kumar, J. Satheesh; Sankar, Deepu
       title: Implementation of Adaptive Embedded Controller for a Temperature Process
        date: 2019-03-18
       words: 4905
      flesch: 59
     summary: Fig. 1 Block diagram of thermal process control systems The above mentioned experimental setup is the prototype of a thermal process. This will help in the field of process control to implement complex algorithms with low-cost devices.
    keywords: adaptive; arduino; control; controller; model; process; simulink; temperature; time
       cache: aiti-1573.pdf
  plain text: aiti-1573.txt

        item: #28 of 148
          id: aiti-158
      author: Lee, Yi-Ping
       title: Innovation Management of Patent Commercialization
        date: 2016-07-01
       words: 2957
      flesch: 53
     summary: Researchers try hard to enhance the rate of patent comme rcia lization. This paper focus on innovation of organization and management to enhance the rate of patent comme rcia lization.
    keywords: comme; commerc; lization; patent; patentee; rate; rcia; research; vol
       cache: aiti-158.pdf
  plain text: aiti-158.txt

        item: #29 of 148
          id: aiti-159
      author: Su, Pei-Hsuan
       title: Participatory Communication Referred to Meta-Design Approach through the FleXpeaker™ Application of Innovative Material in Exhibition Design
        date: 2016-07-01
       words: 2167
      flesch: 54
     summary: Here we anticipate the partic ipatory nature applied in e xhibit design and the transition to more autonomous action for discovery by museum visitors . Keywor ds : communication system, participatory design, exhibit design, flexible speaker 1.
    keywords: design; fle; images; museum; new; technology; visitors
       cache: aiti-159.pdf
  plain text: aiti-159.txt

        item: #30 of 148
          id: aiti-160
      author: Takano, Atsushi
       title: Buckling Experiment on Anisotropic Long and Short Cylinders
        date: 2016-07-01
       words: 1669
      flesch: 69
     summary: References [1] A. Takano, “Statistical knockdown factors of buckling anisotropic cylinders under axial compression,” Journal of Applied Mechanics, vol. 79, 051004, pp 1-17, 2012. Note that an e xtre me ly low knockdown factor 0.397 was caused by 8mm of offset load , and the modified knockdown factor considering the offset is 0.481.
    keywords: buckling; factor; knockdown; ply
       cache: aiti-160.pdf
  plain text: aiti-160.txt

        item: #31 of 148
          id: aiti-168
      author: Hsieh, Wen-Hsiang
       title: Introduction to the First Issue
        date: 2016-07-01
       words: 287
      flesch: 49
     summary: It is a great pleasure to include in the first issue of AITI, six papers written by leading researchers in the international community. On behalf of the Editorial Board, I am delighted to announce the publication of the inaugural issue of Advances in Technology Innovation (AITI), published by the Taiwan Association of Engineering and Technology Innovation (TAETI).
    keywords: journal
       cache: aiti-168.pdf
  plain text: aiti-168.txt

        item: #32 of 148
          id: aiti-175
      author: Wu, Shih-Jeh; Hsu, Hsiang-Chen; Lin, Wen-Fei
       title: Reduction of Residual Stresses in Sapphire Cover Glass Induced by Mechanical Polishing and Laser Chamfering Through Etching
        date: 2016-10-01
       words: 1903
      flesch: 68
     summary: Sapphire glass is made of colorless plates of synthetic corundum, i.e . In fact, sapphire glass does not have a glass -like a morphous structure, but rather a crystalline structure.
    keywords: etching; fig; glass; laser; method; sapphire; stress
       cache: aiti-175.pdf
  plain text: aiti-175.txt

        item: #33 of 148
          id: aiti-176
      author: Lee, Yi-Ping
       title: Innovation Management of Stock Trading System
        date: 2016-10-01
       words: 3587
      flesch: 56
     summary: Basically, business owned stock are open trade in the ma rket, thus, the price of a stock should be some distance protect by the business, if the price is abnormally upward or down ward for reasons very often, which will be a sign of under value or over va lue of the business stock, and the other condition is the opportunist try to control and gain benefit fro m this business stock, thus, business need to develop its trading strategy in keep an amount of stock and capital to buy and sale its stock, that is the trade strategy to that business. Every country have its own different stock trading range limits, stock trading market may be a country's economic showcase, China’s stock change range usually keep as ten percent, but they tried a system na med Circu it Breake r System(CBS) in recent years to stop the trade in stock market.
    keywords: business; change; government; investors; market; sdcrl; stock; system; trade; trading
       cache: aiti-176.pdf
  plain text: aiti-176.txt

        item: #34 of 148
          id: aiti-177
      author: Nascu, Ioana; Nascu, Ioan; Vlad, Grigore
       title: Predictive Adaptive Control of an Activated Sludge Wastewater Treatment Process
        date: 2016-10-01
       words: 1575
      flesch: 51
     summary: [4] B. Holenda, E. Do mokos, A. Rédey, and J. Faza kas, “ Dissolved oxygen control of the activated sludge wastewater treatment process using model predictive control,” Co mputers and Chemica l Engineering, vol. The use of the basic identification scheme may lead to unstable adaptive process control.
    keywords: adaptive; control; model; performances; process; sludge; treatment
       cache: aiti-177.pdf
  plain text: aiti-177.txt

        item: #35 of 148
          id: aiti-178
      author: Chen, Yu-Fen; Wu, Jian-Hong; Huang, Chen-Chih
       title: Experimental Investigation into Mechanical Properties of Nanomaterial-reinforced Table Tennis Rubber
        date: 2016-10-01
       words: 2369
      flesch: 68
     summary: The different surface structures of Nano- reinforced rubber 2.1. 6 Elastic modulus values of Nano-reinforced rubbers and non-reinforced rubber 3.4.
    keywords: fig; modulus; nano; non; rubber; stress; table; tennis
       cache: aiti-178.pdf
  plain text: aiti-178.txt

        item: #36 of 148
          id: aiti-179
      author: Chen, Dyi-Cheng; Huang, Chen-Kun
       title: Study of Injection Molding Warpage Using Analytic Hierarchy Process and Taguchi Method
        date: 2016-10-01
       words: 1919
      flesch: 59
     summary: The levels, factors and orthogonal array variance and the combination are shown in Table 3 respectively. This study integrated Analytic Hierarchy Process and Taguchi method to investigate into injection molding warpage.
    keywords: injection; method; pressure; process; table; taguchi; warpage
       cache: aiti-179.pdf
  plain text: aiti-179.txt

        item: #37 of 148
          id: aiti-180
      author: Svoboda, Ondrej; Machacek, Josef
       title: Tubular Steel Arch Stabilized by Textile Membranes
        date: 2016-10-01
       words: 1411
      flesch: 69
     summary: Introduction Design of steel structures cooperating with TSF (Tensioned Fabric Structures) requires geometrica lly and materia lly non -linear analysis with imperfect ions (GMNIA). For loading calibrated pouches with steel pellets we re used and suspended from seven points of the arch (for the symmetrica l loading see Fig. 2) or fro m four points in case of asymmetrical loading.
    keywords: arch; fig; loading; mbrane; steel
       cache: aiti-180.pdf
  plain text: aiti-180.txt

        item: #38 of 148
          id: aiti-202
      author: Kusumasembada, Anggie Chandra; Teyssedre, Gilbert; Roy, Severine Le; Boudou, Laurent; Sinisuka, Ngapuli Irmea
       title: Assessment of a Charge Transport Model for LDPE through Conduction Current Measurement
        date: 2017-01-01
       words: 4142
      flesch: 61
     summary: For this reason, space charge measurements, on the one hand, and models of charge transport en- compassing charge generation, trapping and transport have been developed. The purpose of this paper is to enrich study regarding LDPE charge transport by presenting measurement results on charging and discharging currents and comparing results with an already available model of conduction based on bipolar charge generation and transport.
    keywords: charge; current; field; ldpe; model; time; transport
       cache: aiti-202.pdf
  plain text: aiti-202.txt

        item: #39 of 148
          id: aiti-203
      author: Chiang, Ching-Shoei
       title: The Tangent Medial Circles Inside the Region Defined by Hermite Curve Tangent to Unit Circle
        date: 2017-01-01
       words: 2995
      flesch: 73
     summary: Images, surround by boundary curves, are also investigated by many researchers. The first two examples is for the symmetric boundary curve where α0=α1=α, for boundary curve with singu- lar point and with local maximum curvature respectively.
    keywords: circle; curve; point; region
       cache: aiti-203.pdf
  plain text: aiti-203.txt

        item: #40 of 148
          id: aiti-204
      author: Tang, Zhi-Long; Kuo, Ting-An; Liu, Hsiao-Han
       title: The Study of the Microbes Degraded Polystyrene
        date: 2017-01-01
       words: 2272
      flesch: 65
     summary: To take advantage of that Tenebrio molitor and Zophobas morio can eat and digest polystyrene as its diet, we analyzed these special microbes with PS plate and PS turbidity system with time courses. And then transferred the microbes on the basal agar plate to PS plate with yeast extract incubating for 24 h at 37℃ as above conditions.
    keywords: gut; microbes; plate; tm1; zm1
       cache: aiti-204.pdf
  plain text: aiti-204.txt

        item: #41 of 148
          id: aiti-205
      author: Chien, Yu-Hung; Chiang, Chung-Piao
       title: Optimal Warranty Length and Selling Price to Maximize the Profit
        date: 2017-01-01
       words: 2331
      flesch: 64
     summary: Introduction In today’s highly competitive market of consumer products, product warranties become an important criterion that distinguishes good and poor quality products. [4] D. N. P. Murthy, O. Solem and T. Roren, “Product warranty logistics: Issues and challenges,” European Journal of Opera- tional Research, vol.
    keywords: period; price; product; profit; warranty
       cache: aiti-205.pdf
  plain text: aiti-205.txt

        item: #42 of 148
          id: aiti-206
      author: Inoue, Masumi; Choi, Heesup; Sudoh, Yuhji; Ayuta, Koichi
       title: Experimental Study of Leaching and Penetration of Nitrite ions in Nitrite-type Repair Materials on the Surface of Concrete
        date: 2017-01-01
       words: 1552
      flesch: 60
     summary: The specimen surfaces excluding test surfaces were coated with an epoxy resin in order to prevent nitrite ion penetration. 22 - 24 22 Experimental Study of Leaching and Penetration of Nitrite ions in Nitrite-type Repair Materials on the Surface of Concrete Masumi Inoue 1,* , Heesup Choi 1 , Yuhji Sudoh 2 , and Koichi Ayuta 1 1 Department of Civil and Environmental Engineering, Kitami Institute of Technology, Hokkaido, Japan.
    keywords: leaching; nitrite; no2
       cache: aiti-206.pdf
  plain text: aiti-206.txt

        item: #43 of 148
          id: aiti-207
      author: Lee, Shui-Pin
       title: EWMA Controller with Concurrent Adjustment for a High-Mixed Production Process
        date: 2017-01-01
       words: 1851
      flesch: 61
     summary: [2] E. Sachs, A. Hu, and E. Ingolfsson, “Run by run process control: combining SPC and feedback control,” IEEE Transactions Sem- iconductor Manufacturing, vol. 8, pp. 26-43, 1995. Traditionally, the manufacturing environment was simplified as a single product and single tool process.
    keywords: ewma; process; products
       cache: aiti-207.pdf
  plain text: aiti-207.txt

        item: #44 of 148
          id: aiti-2376
      author: Hong, Chih-Chiang; Tsai, Deng-Maw
       title: Application of Rotating Arms Type Permanent Magnet Motor
        date: 2019-01-01
       words: 4162
      flesch: 56
     summary: Abstract The present application related to a rotating arm type permanent magnet motor, in particular to a permanent magnet motor that was actuated by the action of the magnetic forces of a permanent magnet stator of a stator module and two thin ring permanent magnets of a rotor module. The rotating arm type permanent magnet motor comprised an external support frame base, a stator module and a rotor module.
    keywords: energy; magnet; motor; ring; rotation; shaft; stator; type
       cache: aiti-2376.pdf
  plain text: aiti-2376.txt

        item: #45 of 148
          id: aiti-2520
      author: Ji, Dae-Hyeong; Choi, Hyeung-Sik; Jeong, Sang-Ki; Oh, Ji-Youn; Kim, Seo-Kang; You, Sam-Sang
       title: A Study on Heading and Attitude Estimation of Underwater Track Vehicle
        date: 2019-03-18
       words: 4208
      flesch: 64
     summary: To reduce the accumulation of integration error, we constructed an extended Kalman filter algorithm using gyro data, acceleration data, and geomagnetism data. In Fig. 4, the AHRS, GPS, and IMU sensor data is used for the algorithm that is ported to the embedded Linux.
    keywords: ars; data; error; fig; sensor; system
       cache: aiti-2520.pdf
  plain text: aiti-2520.txt

        item: #46 of 148
          id: aiti-2521
      author: Jari, Kaivo-Oja; Lauraeus, Theresa
       title: Analysis of 2017 Gartner’s Three Megatrends to Thrive the Disruptive Business, Technology Trends 2008-2016, Dynamic Capabilities of VUCA and Foresight Leadership Tools
        date: 2019-03-18
       words: 5500
      flesch: 40
     summary: Disruptive technologies The importance of new technologies for society arises from the discovery that ideas and their implementation generate growth and well-being [1]. When we focus on technology innovation, it is significantly important to evaluate these high-level trends and the featured technologies, as well as the potential impact on their businesses.
    keywords: business; cycle; foresight; gartner; hype; innovation; management; new; technologies; technology; tools; vol; vuca
       cache: aiti-2521.pdf
  plain text: aiti-2521.txt

        item: #47 of 148
          id: aiti-2522
      author: Sasaki, Yuya; Yokotani, Tetsuya
       title: Performance Evaluation of MQTT as a Communication Protocol for IoT and Prototyping
        date: 2019-01-01
       words: 3753
      flesch: 58
     summary: In the case of MQTT communication, the access delay time is measured from the PUBLISH device to the SUBSCRIBE device via the MQTT broker. 10 Network configuration of access delay measurement In the case of HTTP communication, the access delay time is measured when the server is accessed from the PC to acquire data.
    keywords: access; communication; fig; http; information; iot; mqtt; network; protocol; traffic
       cache: aiti-2522.pdf
  plain text: aiti-2522.txt

        item: #48 of 148
          id: aiti-2523
      author: Machacek, Josef; Pichal, Radek
       title: Prestressed Stainless Steel Stayed Columns with Two Crossarms
        date: 2019-01-01
       words: 5203
      flesch: 65
     summary: Similar principal behavior as in the case of prestressed stayed columns with just one crossarm is confirmed and the three zones depending on the value of prestressing are revealed. [3] M. A. Wadee, L. Gardner, and A. I. Osofero, “Design of prestressed stayed columns,” Journal of Constructional Steel Research, vol. 80, pp.
    keywords: buckling; column; crossarm; fig; prestressing; stays; steel
       cache: aiti-2523.pdf
  plain text: aiti-2523.txt

        item: #49 of 148
          id: aiti-2529
      author: Lin, Jwu-Rong; Huang, Chen-Jui; Chen, Ching-Yu; Shiau, Huey-Ling; Yeh, Yan-Chen
       title: New Ventures, Internationalization, and Asymmetric Grin Curve: Analysis of Taiwan’s Big Data
        date: 2019-01-01
       words: 5908
      flesch: 60
     summary: This paper adopts the big data composed of 104,377 Taiwanese manufacturers from the 2011 Industry, Commerce, and Service Census to assess impact of the business life cycle, brand revenue, R&D spending, and internationalization on value creation. First, the link of the firm’s operating years with value creation is characterized by a quadratic U-shaped curve where the minimum point corresponds to 15 years of operation, suggesting a cost of lower value added for new ventures at the early stage of development.
    keywords: business; creation; curve; fig; impact; new; taiwan; value; vol
       cache: aiti-2529.pdf
  plain text: aiti-2529.txt

        item: #50 of 148
          id: aiti-2530
      author: Chen, Ta-Cheng; Chen, Yi-Wen; Chen, Yen-Shan; Kuo, Yun-Tzu
       title: A Cloud Information Platform for 3D Printing Rehabilitation Devices
        date: 2019-03-18
       words: 4494
      flesch: 51
     summary: In this study, we applied the information technology and cloud-based technology to design a simple and user-friendly web-based interface for making 3D printing splint. The production process of 3D printing splint sequence diagram [7] Table 1 Comparison of Traditional splints and 3D Printing splints Traditional splints 3D Printed splints Production methods Manual 3D Printer Time to use Shorter Longer Breathable Medium Height Customized Low Height Waterproof
    keywords: 3d printing; fig; graphics; information; management; platform; printing; production; splint; system; technology
       cache: aiti-2530.pdf
  plain text: aiti-2530.txt

        item: #51 of 148
          id: aiti-2533
      author: Ferng, Sophia; Huang, Wei-Hua; Wu, Chien-Ping; Lu, Yung-Tsong; Hsu, Cheng-Kuang; Chiou, Robin Yih-Yuan; Ting, Ching-Hua
       title: A Controlled Fermentation Environment for Producing Quality Soya Sauce
        date: 2019-01-01
       words: 5454
      flesch: 58
     summary: [6] F. M. Yong and B. J. B. Wood, “Microbiology and biochemistry of soy sauce fermentation,” Advances in Applied Microbiology, vol. In sauce moromi fermentation, the proteins and polysaccharides in the moromi are hydrolyzed by the fungal protease and amylase to form different types of small nitrogen compounds and sugars, such as amino acids and reducing sugars.
    keywords: acid; fermentation; moromi; nitrogen; sauce; soy; tbm; tcm; vol
       cache: aiti-2533.pdf
  plain text: aiti-2533.txt

        item: #52 of 148
          id: aiti-272
      author: Huang, Yi-Cheng; Chen, Xiang-Yuan
       title: Investigation of a Ball Screw Feed Drive System Based on Dynamic Modeling for Motion Control
        date: 2017-06-01
       words: 2694
      flesch: 72
     summary: Since ba ll screw play a significant role in co n- verting rotary motion into linear mot ion Pre - loading is effective to eliminate backlash and increase the stiffness of ball screw for precision motion concerns. 10N s/m viscous damp ing coefficient of the supp orting bearin g of the ball screw (Bb) 10N s/m rotational viscous damp ing co- efficient of the motor (Qm) 0N ms rotational viscous damp ing co- efficient of the sup p ort bearing of ball screw (Qb) 0N ms angle conversion axial dis- p lacement of the constant (R) 0.0025 motor torque (T) 1.8× 10−3Nm/𝑠2 disp lacement of the working table (Xt) State Variable (m) axial disp lacement of the ball screw (Xb) State Variable (m) rotation angle of the motor (θm) State Variable (rad) rotation angle of the ball screw (θb) State Variable (rad)
    keywords: ball; ball screw; drive; fig; mode; screw; stiffness; system
       cache: aiti-272.pdf
  plain text: aiti-272.txt

        item: #53 of 148
          id: aiti-273
      author: Chen, Sheng-Liang; Dinh, Hoai-Nam; Nguyen, Van-Thanh
       title: Synchronized Injection Molding Machine with Servomotors
        date: 2017-06-01
       words: 3675
      flesch: 66
     summary: Moreover the determining a suitable injection time, screw position and cavity pressure for transfer from injection v e- locity control to packing pressure control which is commonly called filling to packing switchover point is also critical for high quality part. [9] N. A kasaka, “A synchronous position co n- trol method at pressure control between mu lti-ac servomotors driven in inject ion mo lding machine,” in SICE 2003 Annual Conference, vol. 3, pp. 2712 -2719, Aug. 2003.
    keywords: control; controller; fig; injection; motor; packing; phase; position; pressure; servo; system; velocity
       cache: aiti-273.pdf
  plain text: aiti-273.txt

        item: #54 of 148
          id: aiti-274
      author: Hsu, Hsiang-Chen; Chu, Li-Ming; Wang, Zong-Kun; Tsao, Shu-Chi
       title: Position Control and Novel Application of SCARA Robot with Vision System
        date: 2017-06-01
       words: 2434
      flesch: 64
     summary: SCARA robot was introduced in SEIKO watch assembling lines in 1981 and since then industrial SCARA robot has been widely used in electronic, semiconductor, automobile, electronic, plastic, food and pharmaceutica l factories The PID control techniques [7] have been proposed to solve the nonlinearity issue with acceptable results to control the move ment of robot arms .
    keywords: control; coordinate; fig; image; pcb; place; robot; scara; system; vol
       cache: aiti-274.pdf
  plain text: aiti-274.txt

        item: #55 of 148
          id: aiti-275
      author: Chen, Wei-Ling; Lin, Chia-Hung; Kan, Chung-Dann
       title: Assessment of Arteriovenous Shunt Pathway Function and Hypervolemia for Hemodialysis Patients by Using Integrated Rapid Screening System
        date: 2017-06-01
       words: 2665
      flesch: 60
     summary: The project proposes to combine our previous study of au- dio-phono angiographic technology in detecting vascular stenosis with rapid screening system to evaluate dialysis patients’ arteriovenous routes function and their status of e xcess body fluids: inspecting and integrating the blood pressure, body weight, and fistula function work into a rapid screening system, and using the quantiza- tion of fistula phono angiography pitch to achieve assessing arteriovenous routes. The purpose of this paper is to combine our previous study of audio-phonoangiographic technology in detecting vas cular stenosis with rapid screening system to evaluate dialysis *
    keywords: arteriovenous; body; dos; fig; patients; screening; stenosis; system; vol
       cache: aiti-275.pdf
  plain text: aiti-275.txt

        item: #56 of 148
          id: aiti-276
      author: A., Kamaruddin; Uyun, Aep S.; Bamahry, Alie; Imanda, Rino
       title: Simulation of Desiccant Cooling
        date: 2017-06-01
       words: 2752
      flesch: 68
     summary: [5] M. M. S. De zfouli, S. Mat, G. Pirasteh, K. S. M. Sahari, K. Sopian, and M. H. Ruslan, “Simu lation analysis of the four configure- tions of solar desiccant cooling system us- ing evaporative cooling in tropical weather in Malaysia,” International Journal of Photoenergy, vol. 2014, http://dx.doi.org/10.1155/2014/ 843617 The purpose of the study is to obtain mathe matica l mode l for the purpose of simula - tion of desiccant cooling system.
    keywords: air; cooling; desiccant; heat; system
       cache: aiti-276.pdf
  plain text: aiti-276.txt

        item: #57 of 148
          id: aiti-277
      author: Chiang, Li-Wei; Guo, Sy-Jye
       title: The Research of Infrared Thermal Image Diagnostic Model for Building External Wall Tiles
        date: 2017-06-01
       words: 2331
      flesch: 62
     summary: [2] L. W. Chiang, S. J. Guo, and C. Y. Chang, “The model of visual inspection for building external wall deterioration tiles,” Journal of Architecture, vol. Based on the test results, the study reco m- mends that for frequencies between 200 and 800 Hz on the spectrogram, it can be deduced that a cavity is present in the tiles, and this can be used as basis for determining tile deterioration.
    keywords: deterioration; diagnosis; study; tap; temperature; tiles; tone; wall
       cache: aiti-277.pdf
  plain text: aiti-277.txt

        item: #58 of 148
          id: aiti-2982
      author: Boretti, Albert; Lappas, Petros
       title: Complex Independent Laboratory Tests to Signify Fuel Economy and Emissions under Real World Driving
        date: 2019-03-18
       words: 7665
      flesch: 61
     summary: The CO2 emission per liter of diesel fuel was shown in Parker [14] to range from a maximum of 3,049 g for a minimum of 2,125 g, with an average of 2,625 g. The CO2 emission per liter of petrol fuel was shown in Parker 6 shows the carbon dioxide emissions in g CO2 per litre of diesel fuel consumed.
    keywords: co2; cycle; diesel; driving; economy; emissions; engine; fuel; laboratory; nedc; tests; vehicles; vol; world
       cache: aiti-2982.pdf
  plain text: aiti-2982.txt

        item: #59 of 148
          id: aiti-310
      author: Boretti, Albert
       title: Numerical Study of the Operation of Motorcycles Covering the Urban Dynamometer Driving Schedule
        date: 2017-05-09
       words: 6015
      flesch: 76
     summary: Ca nada Sc re a min ' Eag le ® st re et pe rfo rmanc e tun e r kit,” ht tp ://a ccessories.ha rley -d av idson.ca/p rodu ct/sc re a min -eag lesup/sup-st re et -p erfo rmanc e -tune r-kit/ 41000008B, re trieved August 31, 2016. In the UDDS cyc le, Fig. 2, only in one of the acceleration, cruise and deceleration schedules it is requested a bike velocity of 90 km/h, and in only 3 other areas the bike reaches a speed above 50 km/h but less than 60 km/h. Figs. 4, 5 and 6 present reference data of BM EP, torque and power vs. engine speed and throttle opening % for the typica l large cruiser considered here, having a lo w displacement specific powe r and torque, lo w ma ximu m speed.
    keywords: copy; driving; emissions; engine; epa; fig; fuel; ion; map; motorcycles; power; speed; taeti; torque; tuners
       cache: aiti-310.pdf
  plain text: aiti-310.txt

        item: #60 of 148
          id: aiti-345
      author: Lu, Chun-Liang; Lin, Tsun-Chen
       title: Improved SVM Classifier Incorporating Adaptive Condensed Instances Based on Hybrid Continuous-Discrete Particle Swarm Optimization
        date: 2016-09-26
       words: 4385
      flesch: 61
     summary: Considering the tradeoff b e- tween the classification accuracy and selected feature number, these two weight 1w and 2w values can be adjusted according to the preference for SVM classifier design. Experiment results show that the proposed framework can achieve better performance than other published methods in literature and provide a simple but subtle strategy to effectively improve the classification accuracy for SVM classifier.
    keywords: aci; classification; instances; particle; pso; step; svm
       cache: aiti-345.pdf
  plain text: aiti-345.txt

        item: #61 of 148
          id: aiti-366
      author: Islam, S.M. Sofiqul; Dey, Emon Kumar; Tawhid, Md. Nurul Ahad; Hossain, B. M. Mainul
       title: A CNN Based Approach for Garments Texture Design Classification
        date: 2017-05-09
       words: 5766
      flesch: 60
     summary: [9], based on Caffe toolkit proposed three different architectures of deep CNN models: VGG_F, VGG_M and VGG_S; each of which explores a different speed/accuracy trade-off: (1) VGG_F: Th is CNN arch itecture is almost simila r to Ale xNet. Proposed model is then applied alongside with two well-known deep Convolutional Neural Network (CNN) models AlexNet and VGG_S in two different garment datasets for the purpose of training and testing.
    keywords: alexnet; classification; clothing; cop; dataset; deep; design; fashion; garments; images; layer; model; recognition; training
       cache: aiti-366.pdf
  plain text: aiti-366.txt

        item: #62 of 148
          id: aiti-368
      author: Kim, MinJung
       title: High-temperature Corrosion of T22 Steel in N2/H2S-mixed Gas
        date: 2017-05-09
       words: 2447
      flesch: 70
     summary: T22 steel cor- roded rapidly, forming outer FeS scales and inner (FeS, FeCr2O4)-mixed scale. The outer scale was d e- tached from the inner scale, and vertica l cracks were seen in the inner scale, owing to the la rge stress arisen by (1) the mis match in the therma l e xpansion coeffic ients among the outer scale, inner scale, and the matrix, (2) the difference in the growth rates of various oxides and sulfides, and (3) the hydrogen dissolution in the scale.
    keywords: corrosion; fes; fig; gas; scale; steel; t22
       cache: aiti-368.pdf
  plain text: aiti-368.txt

        item: #63 of 148
          id: aiti-369
      author: Yadav, Poonam; Lee, Dong Bok
       title: Oxidation of Titanium and Ti/(TiB+TiC) Composite
        date: 2017-05-09
       words: 1769
      flesch: 60
     summary: Ke ywor ds : Titaniu m, Titaniu m mat rix co mposite, Oxidation, Oxide scale 1. Following oxidation process, matrix phases and oxide scales were investigated using scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) using Cu-Kα radiation operated at 40 kV and 100 mA.
    keywords: oxidation; oxide; scale; titanium
       cache: aiti-369.pdf
  plain text: aiti-369.txt

        item: #64 of 148
          id: aiti-3795
      author: Jain, Gaurav; Palwalia, Dheeraj Kumar; Mishra, Anuprita
       title: Transmission Wheeling Pricing in Embedded Cost Using Modified Amp-Mile and MVA Utility Factor Methods
        date: 2019-06-28
       words: 11382
      flesch: 61
     summary: t t t t t t t l ldk t t t t t t lk ldk
    keywords: allocation; amp; bus; cost; factor; l l; load; method; mile; mva; power; system; t l; t t; transmission; utility; vol
       cache: aiti-3795.pdf
  plain text: aiti-3795.txt

        item: #65 of 148
          id: aiti-384
      author: Boretti, Albert
       title: Changes of E-KERS Rules to Make F1 More Relevant to Road Cars
        date: 2017-10-20
       words: 6463
      flesch: 70
     summary: In addition to the fuel flo w limiter placed along the fuel line, the 2014 and 2015 season have seen the introduction of a total fuel per race capped at 100 kg, or 4,450 MJ of fuel energy per race, that is certainly a driver for much better fuel economies, but not certainly that strong. In case of one lap of the Monaco Grand Prix, 3.337 km long, a F1 of curb weight 702 kg less the driver weight may use 1.28 kg or 57 MJ of fuel energy, i.e .
    keywords: car; cop; energy; fuel; ice; lap; m gu; power; race; taeti
       cache: aiti-384.pdf
  plain text: aiti-384.txt

        item: #66 of 148
          id: aiti-3918
      author: Shaw, Heiu-Jou; Tzu, Fu-Ming
       title: The Strategy of Energy Saving for Smart Shipping
        date: 2019-06-28
       words: 5827
      flesch: 64
     summary: Second, an EEOI-based strategy for ship energy management is presented. 12 Profile of average draft and trim with respect to ME fuel consumption Fig.
    keywords: consumption; data; draft; eeoi; energy; fig; fuel; power; ship; speed; trim; wind
       cache: aiti-3918.pdf
  plain text: aiti-3918.txt

        item: #67 of 148
          id: aiti-3919
      author: Tsai, Chia-Chun
       title: Performance Evaluation for Stacked-Layer Data Bus Based on Isolated Unit-Size Repeater Insertion
        date: 2019-06-28
       words: 7470
      flesch: 63
     summary: If most of data access times for a program at different timing periods can be reduced a little, then its average access time will be decreased, that is, the program performance can thus be promoted. The estimation of a unit-size repeater insertion To understand the effects in data access time of a source-sink pair, it is required to make the estimation of a data access time before/after inserting a unit-size bidirectional repeater into a bus wire.
    keywords: access; bus; data; number; repeaters; size; time; timing; unit
       cache: aiti-3919.pdf
  plain text: aiti-3919.txt

        item: #68 of 148
          id: aiti-3946
      author: Wu, Chien-Min; Kao, Yen-Chun; Chang, Kai-Fu
       title: A Multichannel MAC Protocol for IoT-enabled Cognitive Radio Ad Hoc Networks
        date: 2020-01-01
       words: 5540
      flesch: 65
     summary: if PU active on equals data channel then. These questions include avoiding interference with channel use by PUs, switching between PU channels, and ensuring QoS.
    keywords: channel; cluster; data; head; mac; node; number; protocol; token; vol
       cache: aiti-3946.pdf
  plain text: aiti-3946.txt

        item: #69 of 148
          id: aiti-3953
      author: Hasseni, Seif-El-Islam; Abdou, Latifa
       title: Robust LPV Control for Attitude Stabilization of a Quadrotor Helicopter under Input Saturations
        date: 2020-04-01
       words: 5926
      flesch: 70
     summary: (18)-(22), and the controller’s state space is expressed as: 1 2p px Ax B w B w B u    (18) 1 2p p pp p p pz C x D w D w D u    (19) 1 1 11 12p pz C x D w D w D u    (20) 2 2 21 22p py C x D w D w D u    (21) p pw z  (22) where x is the states vector; u is the input vector; w is the exogenous inputs; disturbances and noises; y is the measured outputs; z is the controlled outputs; pz and pw are inputs and outputs of the block, 1 1 2 2( , ,..., ).r x D y D w   (24) 1Kp Kp K Kp Kpp Kpz C x D y D w   (25) Kp Kpw z  (26) where Kx is the controller states vector, y is the outputs from the plant, u is the controller outputs, Kpz , and Kpw are inputs and outputs of the block parameter.
    keywords: controller; fig; vol
       cache: aiti-3953.pdf
  plain text: aiti-3953.txt

        item: #70 of 148
          id: aiti-3960
      author: Meryem, Bachar; Ahmed, Naddami; Ahmed, Fahli
       title: Photovoltaic Power Control Using Fuzzy Logic and Fuzzy Logic Type 2 MPPT Algorithms and Buck Converter
        date: 2019-06-28
       words: 5140
      flesch: 64
     summary: The studied system consists of PV array, DC/DC converter, MPPT controller, batteries and load. The PV Voltage with InC, FL, and FLT2 MPPT algorithms Fig.
    keywords: algorithms; converter; fig; flt2; inc; logic; mppt; power; vol; voltage
       cache: aiti-3960.pdf
  plain text: aiti-3960.txt

        item: #71 of 148
          id: aiti-4003
      author: Ebangu, Benedict Orari; Dintwa, Edward; Motsamai, Oboestwe
       title: Development of a Cost-effective Design of a P-V Ventilated Greenhouse Solar Dryer for Commercial Preservation of Tomatoes in a Rural Setting
        date: 2019-08-28
       words: 6341
      flesch: 57
     summary: [24] B. A. Berichte, “Experimental studies and mathematical modelling of solar drying system for production of high quality dried tomato,” pp. 1-173, 2007.D. Jain and P. B. Pathare, “Study the drying kinetics of open sun drying of fish,” Journal of Food Engineering, vol. 78, no. 4, pp. 1315-1319, February 2007. [23] M. G. S. Green, “Solar drying technology for food preservation,” GTZ-GATE, January 2011D. Brooker, “Mathematical model of the psychrometric chart,” Transactions of the ASAE, vol. 10, pp. 558-560, 1967.
    keywords: air; content; design; dryer; drying; energy; food; greenhouse; moisture; solar; tomato; tomatoes; vol
       cache: aiti-4003.pdf
  plain text: aiti-4003.txt

        item: #72 of 148
          id: aiti-4027
      author: Lien, Cheng-Chang; Lin, Wei-Cheng
       title: A Biogas Desulphurization System with Water Scrubbing
        date: 2019-08-28
       words: 3908
      flesch: 56
     summary: The H2S detecting device (120-SM, Kitagawa, Japan) is used to measure the H2S concentration versus water scrubbing time, in order to calculate the removal H2S efficiency of water scrubbing and desulphurization. From the test results, it showed that the removal efficiency of H2S was 47.7% in 30 minutes of water scrubbing time under 120 ℓ of total water amount, 80 cm of water level in the water scrubbing cylinder, 20 ℓ/min of internal circulation water flow rate and 10 ℓ/min of external circulation water flow rate, and 25 ℓ/min of biogas flow rate.
    keywords: biogas; flow; flow rate; rate; scrubbing; water; ℓ/min
       cache: aiti-4027.pdf
  plain text: aiti-4027.txt

        item: #73 of 148
          id: aiti-4067
      author: Tang, Kai-Yu; Hsiao, Chun-Hua; Chen, Mei-Chun
       title: A Research Survey of Electronic Commerce Innovation: Evidence from the Literature
        date: 2019-08-28
       words: 7630
      flesch: 52
     summary: Fig. 2 visualizes the distribution of EC innovation research with the number of publications, showing the publication trends of the most productive countries in EC innovation across the two phases (2000-2009 and 2010-2018). The growth of authors involved in the EC innovation research in the last five years (2014-2018, as shown in Fig. 1) is especially noteworthy, indicating the great attraction of EC innovation research to academics.
    keywords: articles; commerce; decade; information; innovation; keywords; management; online; research; technology; vol
       cache: aiti-4067.pdf
  plain text: aiti-4067.txt

        item: #74 of 148
          id: aiti-4072
      author: Chen, Wen-Chin; Lin, Pao-Wen ; Lin, Shi-Bo ; Lin, Kuan-Ming ; Chang, Yun-Ru 
       title: An Intelligent Optimization System of Micro Electroforming Process for the Mesh Filter
        date: 2019-08-28
       words: 6216
      flesch: 48
     summary: the process parameter (control factor), yod is the output value of diameter quality predictor after de-normalization, and yot is the output value of thickness deviation quality predictor after de-normalization, and 555 is the target value of diameter quality characteristic, and 0.01 is the target value of thickness deviation quality characteristic as smaller as possible. The factor response chart shows that a set of Taguchi optimal process parameter combination can be obtained to meet the multiple quality characteristics.
    keywords: deviation; diameter; electroforming; parameters; predictor; process; quality; ratio; taguchi; thickness; value
       cache: aiti-4072.pdf
  plain text: aiti-4072.txt

        item: #75 of 148
          id: aiti-4080
      author: Huang, Chi-Fu;  Jhang, Jyun-Hao
       title: Efficient RSU Selection Approaches for Load Balancing in Vehicular Ad Hoc Networks
        date: 2020-01-01
       words: 3973
      flesch: 66
     summary: In Vehicle-based scheme, vehicles choose their serving RSU according to the load index, trajectories, and path lengths to RSUs, independently and distributedly. 3.1. In recent years, vehicles on the move can also enjoy the convenience of wireless communication technologies by assisting each other in message exchange and form an interconnecting network, namely Vehicular Ad Hoc Networks (VANETs).
    keywords: diagram; load; map; rsus; vehicles; vehicular; vol; voronoi
       cache: aiti-4080.pdf
  plain text: aiti-4080.txt

        item: #76 of 148
          id: aiti-4099
      author: Pham, Vu Nam; Nguyen, Dinh Kien; Gan, Buntara Sthenly
       title: Vibration Analysis of Two-Directional Functionally Graded Sandwich Beams Using a Shear Deformable Finite Element Formulation
        date: 2019-06-28
       words: 6649
      flesch: 66
     summary: The element contains six degrees of freedom per node, and the vector of nodal displacements is given by { } T u wb ws d d d d (12) where 1 2 1 , 1 2 , 2 1 , 1 2 , 2 { }, { }, { } u wb b b x b b x ws s s x s s x u u w w w w w w w w  d d d (13) are, respectively, the vectors of axial displacements, bending and shear transverse displacements at node 1 and node 2. The mass sub-matrices in the above equation are obtained by twice differentiation of the kinetic energy with respect to the associated nodal velocities and they have the following forms   11 12 , 11 , 34 ,x2 ( 2 x 2) ( 2 x 4) ( 2 x 4)0 0 0 11 ,x 22 ,x 11 ,x 44 ,x2 ( 4 x 4)( 4 x 4) 0 0 11 ( 4 x 4) 4 , , , 3 4 , , 3 1 b s b b l l l T T T T uu u u uw u w x uw w w u x w l l T T T T m m w w w w bs w w w w T ss w w I dx
    keywords: beam; vibration; w w; z z
       cache: aiti-4099.pdf
  plain text: aiti-4099.txt

        item: #77 of 148
          id: aiti-4105
      author: Yeh, Chun-Lang
       title: Numerical Analysis of an Industrial-Scale Steam Methane Reformer
        date: 2019-06-28
       words: 6064
      flesch: 59
     summary: For a non-reversible reaction, the molar rate of creation/destruction of species i in reaction r is given by     j,r j,rN i,r i,r i,r f ,r j 1 j,r R̂ k C               (7) For a reversible reaction,   j,r j,rN Ni,r i,r i,r f ,r j 1 j,r b,r j 1 j,rR̂ k C k C                     (8) where 𝐶𝑗,𝑟 = molar concentration of species j in reaction r (kgmol/m 3 ) 𝜂𝑗,𝑟 ′ = rate exponent for reactant species j in reaction r 𝜂𝑗,𝑟
    keywords: burners; group; hydrogen; methane; model; reaction; reformer; reforming; steam; temperatures; tube; vol
       cache: aiti-4105.pdf
  plain text: aiti-4105.txt

        item: #78 of 148
          id: aiti-4123
      author: Wang, Yu-Shun; He, Ling-Song ; Gao, Zhi-Qiang ; Wang, Jun-Feng ;  Cao, Yang-Fan
       title: Remote Monitoring for the Operation Status of CNC Machine Tools Based on HTML5
        date: 2019-08-28
       words: 3857
      flesch: 49
     summary: On the one hand, it added visualization of tool position data and tool trajectory during monitoring, always feedback the current artifact appearance to the monitor, and could view the artifact in all directions by dragging and zooming. In addition, it helped to grasp the information of CNC machine tool conditions at all times, which reduced the difficulty of subsequent fault analysis and diagnosis.
    keywords: cnc; data; fig; machine; model; monitoring; system; time; tool
       cache: aiti-4123.pdf
  plain text: aiti-4123.txt

        item: #79 of 148
          id: aiti-4136
      author: Miyakoshi, Kazuki; Shun Ito; Hidetoshi Oya; Yoshikatsu Hoshi; Shunya Nagai
       title: Synthesis of Formation Control Systems for Multi-Agent Systems under Control Gain Perturbations
        date: 2020-04-01
       words: 7837
      flesch: 79
     summary: t t t t l K F F d x t x t  (12) and 6( ) F u t  is the consensus protocol given by   2 3 0 0 0 ( ) ( ) ( ) 2 ( ) ( ) ( ) ( ) ( ) 2 ( ) ( ) ( ) ( ) ( ) ( ) l F t x t u t F t F t F t x t F t F t F t x t L F t x t F t x t     
    keywords: f t; k f; k t; t t; u t;  ;  ;  ;  
       cache: aiti-4136.pdf
  plain text: aiti-4136.txt

        item: #80 of 148
          id: aiti-4138
      author: Hwai-Tsu Hu; Ying-Hsiang Lu
       title: Frame-synchronous Blind Audio Watermarking for Tamper Proofing and Self-Recovery
        date: 2020-01-01
       words: 7784
      flesch: 63
     summary: 2 Arrangement of watermark bits 4.2. Compared to the lengthy computation required in the embedding process, the time spent on watermark extraction is greatly reduced while extracting watermark bits from the 2 nd and 3 rd detail subbands using AQIM.
    keywords: audio; detail; recovery; scheme; self; signal; subband; vol; watermarking
       cache: aiti-4138.pdf
  plain text: aiti-4138.txt

        item: #81 of 148
          id: aiti-4139
      author: Ito, Shun; Miyakoshi, Kazuki ; Oya, Hidetoshi ; Hoshi, Yoshikatsu ; Nagai, Shunya 
       title: Consensus via Adaptive Gain Controllers Considering Relative Distances for Multi-Agent Systems
        date: 2019-08-28
       words: 7143
      flesch: 81
     summary:                          
    keywords: px t; t b; t f; t t; v t;  ;  ;  ;  
       cache: aiti-4139.pdf
  plain text: aiti-4139.txt

        item: #82 of 148
          id: aiti-4142
      author: Nguyen, Ngoc-Duc; Choi, Hyeung-Sik; Jin, Han-Sol; Jiafeng Huang; Lee, Jae-Heon
       title: Robust Adaptive Depth Control of Hybrid Underwater Glider in Vertical Plane
        date: 2020-07-01
       words: 5509
      flesch: 67
     summary: Tq eqV k e e e e Y a a P a         (19) 2 2 2 2 2 1 2 2 ˆ ˆ ( )q eq e Y a k e e k sat        (20) Substituting the control law (20) into the first derivative of the Lyapunov function (19) will result to: 2 2 12 2 1 1 2 2 2 2 2 2 2 2 2 2 2 2 ˆ ˆ( ) ( )eq eq e V k e k e k e sat e e Y a a P a           (21) By choosing the adaption law as �̇̂� = −𝑃2𝑌2 𝑇 𝑒2, the derivative of 𝑉2can be derived as: 2 2 2 2 1 1 2 2 2 2 2 2 ˆ( ) ( )eq eq e V k e k e k e sat e         (22)       (9) where 33   qym I M (10) 2 ( ) ( ) ( )sin ( )cos            g g w w q u g
    keywords: control; depth; underwater;  
       cache: aiti-4142.pdf
  plain text: aiti-4142.txt

        item: #83 of 148
          id: aiti-4144
      author: Bonnaud, Olivier; Bsiesy, Ahmad
       title: Adaptation of the Higher Education in Engineering to the Advanced Manufacturing Technologies
        date: 2020-04-01
       words: 5559
      flesch: 42
     summary: The twelve common centres of the CNFM (red circles and red stars) manage practical training platforms and are located throughout the metropolitan area. Electronic hardware platforms (microprocessors, microcontrollers, sensors, actuators, etc.) are at the heart of the smart factory and they are provided by microelectronics industry
    keywords: cnfm; education; industry; microelectronics; network; objects; platforms; systems; technology; training; vol
       cache: aiti-4144.pdf
  plain text: aiti-4144.txt

        item: #84 of 148
          id: aiti-4148
      author: Madhusudan Raghavan
       title: Optimizing Engine Start Systems with Application to Sailing/Coasting and Mild Hybridization
        date: 2020-01-01
       words: 4429
      flesch: 60
     summary: [14] M. Raghavan, N. Bucknor, and V. Donikian, “The kinematics and dynamics of engine start systems,” in IFToMM [11] M. Canova, Y. Guezennec, and S. Yurkovich, “On the control of engine start/stop dynamics in a hybrid Electric vehicle,” ASME Journal of Dynamic Systems Measurement and Control, vol.
    keywords: coasting; engine; fuel; motor; operation; ratio; rpm; speed; starter; stop; system
       cache: aiti-4148.pdf
  plain text: aiti-4148.txt

        item: #85 of 148
          id: aiti-415
      author: Simon, Vilmos
       title: Advanced Manufacture of Spiral Bevel and Hypoid Gears
        date: 2016-11-18
       words: 4201
      flesch: 68
     summary: Manufacture of Spiral Bevel and Hypoid Gears on Cradle-Type Generator The concept of an imag inary generating crown gear is used in the gen erating cutting process of the face -hobbed spiral bevel and hypoid pinion and gear teeth (Fig. 1). In this study, an advanced method for the manufacture of spiral bevel and hypoid gears on CNC hypoid generators is proposed.
    keywords: contact; gear; hypoid; machine; tooth
       cache: aiti-415.pdf
  plain text: aiti-415.txt

        item: #86 of 148
          id: aiti-4155
      author: Chen, Yit-Jin; Cheng-Chieh Hsiao; Anjerick Topacio
       title: Side Resistance of Drilled Shafts Socketed into Rocks for Serviceability and Ultimate Limit States
        date: 2020-07-01
       words: 3694
      flesch: 64
     summary: 156-165 160 Table 2 Statistics of load test data for analysis Interpretation method n Statistical Analysis Pile Geometry qu (MPa)  fs (MPa) In addition, 81 sets of pile load data instruments were used from these load tests.
    keywords: analysis; coordinate; interpretation; load; logarithmic; resistance; uq
       cache: aiti-4155.pdf
  plain text: aiti-4155.txt

        item: #87 of 148
          id: aiti-416
      author: Yang, Jinn-Min; Wei, Shih-Hsuan
       title: Spatial and Spectral Nonparametric Linear Feature Extraction Method for Hyperspectral Image Classification
        date: 2016-11-18
       words: 2544
      flesch: 66
     summary: Unlike lots of feature extraction methods are based only on the spectral (band) information of the training sam- ples, some feature extraction methods integrating both spatial and spectral information of training samples show more effective results in recent years. [6] B. C. Kuo and D. A. Landgrebe, “Non- parametric we ighted feature e xtract ion for classification,” IEEE Transaction on Geo- science and Re mote Sensing, vol.
    keywords: classification; extraction; feature; hyperspectral; image; matrix; ssnlda; training
       cache: aiti-416.pdf
  plain text: aiti-416.txt

        item: #88 of 148
          id: aiti-4164
      author: Chen, Tzu-Hsia; Hsieh, Long-Chang
       title: The Design of Mold Clamping Mechanisms with Two Dead-Position Configurations
        date: 2020-01-01
       words: 3636
      flesch: 58
     summary: Good kinematic characteristics of mold clamping mechanism is the goal pursued by manufacturers of blow-molding machine. Good kinematic characteristics of mold clamping mechanism is the goal pursued by manufacturers.
    keywords: clamping; fig; mechanism; mold; position
       cache: aiti-4164.pdf
  plain text: aiti-4164.txt

        item: #89 of 148
          id: aiti-4167
      author: I-Ming Chao; Hsiung, Shou-Cheng; Jenn-Long Liu
       title: Improved Whale Optimization Algorithm Based on Inertia Weights for Solving Global Optimization Problems
        date: 2020-07-01
       words: 4453
      flesch: 63
     summary: To conclude the literature review; different inertia weight strategies may get various incremental changes in a better solution. From the literature review, different inertia weight strategies are known to get different changes in solution [2, 11].
    keywords: exploration; functions; inertia; optimization; whale; woa
       cache: aiti-4167.pdf
  plain text: aiti-4167.txt

        item: #90 of 148
          id: aiti-417
      author: Bahatmaka, Aldias; Kim, Dong Joon; Chrismianto, Deddy
       title: Optimization of Ducted Propeller Design for the ROV (Remotely Operated Vehicle) using CFD
        date: 2016-11-18
       words: 4781
      flesch: 78
     summary: The results of pressure contour from type A nozzle for B-series (B5-75) shown in Fig. 20, type A nozzle for Kaplan-series (Ka 5-75) shown in Fig. 21, type B nozzle for B-series (B5-75) shown in Fig. 22, type B nozzle for Kaplan-series (Ka 5-75) shown in Fig. 23, type C nozzle for B-series (B5-75) shown in Fig. 24, type A nozzle for Kaplan-series (Ka5-75) shown in Fig. 25. 3. The comparison of propeller types such as B-Series (B5-75) and Kaplan-series (Ka5-75) shows that Kaplan-series (Ka 5-75) has stronger thrust than B-series (B5-75) and the strea mline simulation shows these results also.
    keywords: fig; kaplan; nozzle; propeller; rov; series; thrust; type
       cache: aiti-417.pdf
  plain text: aiti-417.txt

        item: #91 of 148
          id: aiti-418
      author: Liu, Nien-Te; Wu, Chang-Tzuoh
       title: The Innovative Bike Conceptual Design by Using Modified Functional Element Design Method
        date: 2016-11-18
       words: 2354
      flesch: 61
     summary: Liu and Wu have proposed the representations for bicycle characteristics, but the process for bicycle design is not mentioned in the study [3]. 5. Conclusions The approach proposed by this research is to modified functional e le ments design method for bicycle design.
    keywords: bicycle; design; ele; functional; ments; process; step; study; system
       cache: aiti-418.pdf
  plain text: aiti-418.txt

        item: #92 of 148
          id: aiti-419
      author: Ko, Kuk Won; Lee, Sangjoon
       title: Biosignal –Based Multimodal Biometric System
        date: 2016-11-18
       words: 3421
      flesch: 69
     summary: We manufac- tured a bio-signal measure ment system that can simu ltaneously measure ECG and PPG signals, using which three channels of ECG signal and one channel of PPG signal we re acquired fro m the right-hand index finger of a total of 33 su b- sets for 3 minutes. PPG signals are bio-signals that are lin ked with ECG signals, and also represent the state of b lood vessels of the subject with heart contraction.
    keywords: data; ecg; features; fig; fro; points; ppg; recognition; signals
       cache: aiti-419.pdf
  plain text: aiti-419.txt

        item: #93 of 148
          id: aiti-420
      author: You, Rui-Wei; Fu, Yen-Pei
       title: Zinc Sulfide Buffer Layer for CIGS Solar Cells Prepared by Chemical Bath Deposition
        date: 2016-11-18
       words: 2738
      flesch: 72
     summary: It was found that the optimu m deposition time is 90 min for preparing ZnS thin film that is suitable as buffer layer for CuIn 1-xGaxSe2 solar cells. In this study, ZnS thin film prepared by CBD is zinc-blend type with cubic structure being in correspondence with JCPDS card
    keywords: deposition; film; layer; min; solar; thin; time; zinc; zns
       cache: aiti-420.pdf
  plain text: aiti-420.txt

        item: #94 of 148
          id: aiti-421
      author: Liu, Louis Wai Yip
       title: Harvesting Atmospheric Ions Using Surface Electromagnetic Wave Technologies
        date: 2017-05-09
       words: 4839
      flesch: 65
     summary: The ions from the proposed negative ion source contribute to a potential differ- ence which can be further increased by connecting the pro- posed negative ion source in series. There have been published reports on the link between lack of negative ions in the body and ailments, including headaches, and/or fatigue
    keywords: atmospheric; cop; dielectric; energy; ions; layer; metal; radiations; source; surface; voltage; water
       cache: aiti-421.pdf
  plain text: aiti-421.txt

        item: #95 of 148
          id: aiti-4278
      author: Ho, Chao-Ching; Su, Eugene; Li, Po-Chieh; Bolger, Matthew J.; Pan, Huan-Ning
       title: Machine Vision and Deep Learning Based Rubber Gasket Defect Detection
        date: 2020-04-01
       words: 3622
      flesch: 55
     summary: [11] C. C. Ho and J. J. Liu, “Development of auto defect inspection system for cell phone silicone rubber gasket,” Proc. Training and dataset for deep learning network
    keywords: defects; detection; fig; learning; rubber; vol
       cache: aiti-4278.pdf
  plain text: aiti-4278.txt

        item: #96 of 148
          id: aiti-4284
      author: Jia-Shing Sheu; Chen-Yin Han
       title: Combining Cloud Computing and Artificial Intelligence Scene Recognition in Real-time Environment Image Planning Walkable Area
        date: 2020-01-01
       words: 3109
      flesch: 56
     summary: To achieve to mark walkable areas and relative coordinates, this study is divided into three parts: (1) The first part constitutes neural network object identification. The walkable area determined using the system, marked by BLUE COLOR Table 2 presents the detail of the detection, we chosen Google’s Tensorflow Object detection API “faster_rcnn_ inception_resnet_v2_atrous_coco” frozen model as object detection model, “ssd_mobilenet_v1_coco,” and “ssd_mobilenet Advances in Technology Innovation, vol.
    keywords: area; detection; fig; image; network; neural; object; system
       cache: aiti-4284.pdf
  plain text: aiti-4284.txt

        item: #97 of 148
          id: aiti-4286
      author: Chang, Lin-Huang; Tsung-Han Lee; Hung-Chi Chu; Cheng-Wei Su
       title: Application-Based Online Traffic Classification with Deep Learning Models on SDN Networks
        date: 2020-09-01
       words: 6977
      flesch: 53
     summary: [15] P. Wang, F. Ye, X. Chen, and Y. Qian, “Datanet: deep learning based encrypted network traffic classification in SDN home gateway,” vol. 6, article 18174852, pp. 55380-55391, September 2018. This is mainly due to the increasing number of deep learning network layers and the volume of dataset which consequently increases the computational cost corresponding to the execution time required training a deep learning network.
    keywords: application; classification; data; dataset; learning; learning models; models; network; sae; sdn; skypeaudio; statistics; traffic; training
       cache: aiti-4286.pdf
  plain text: aiti-4286.txt

        item: #98 of 148
          id: aiti-4288
      author: Bidyarani Devi, Mutum; Rajagopalan Devanathan
       title: Evaluation of Pan-Sharpening Techniques Using Lagrange Optimization
        date: 2020-07-01
       words: 8201
      flesch: 67
     summary: (3), and the fifth step consists of applying the proposed two cases of fusion methods to the dataset with the respective means of the band added to the deviations (Eq s. (6)-(16)). Simulation results of the proposed method and comparison with other fusion methods based on several evaluation criteria are discussed in Section 5.
    keywords: band; blue; data; fusion; image; jk jk; method; multispectral; pan; red; resolution; value; vol
       cache: aiti-4288.pdf
  plain text: aiti-4288.txt

        item: #99 of 148
          id: aiti-4380
      author: Chih-Chiang Hong
       title: Free Vibration Frequency of Thick FGM Circular Cylindrical Shells with Simply Homogeneous Equation by Using TSDT
        date: 2020-04-01
       words: 8692
      flesch: 78
     summary:                                             [1] presented the free vibration of FGM circular cylindrical shells, including the Pasternak foundation and stationary fluid by using the first order shear deformation theory (FSDT).
    keywords: fgm; fh fh
       cache: aiti-4380.pdf
  plain text: aiti-4380.txt

        item: #100 of 148
          id: aiti-445
      author: Sofi, Shabir Ahmad; Naaz, Roohie
       title: Securing Ad Hoc Wireless Sensor Networks under Byzantine Attacks by Implementing Non-Cryptographic Methods
        date: 2017-05-09
       words: 5390
      flesch: 71
     summary: Algorithm dedicated cluster head Assumption is that cluster heads are pre assigned with identified cluster nodes . The goal of the By z- antine node is to disrupt the communicat ion of other nodes in the network, without regard to its own resource co n- sumption.
    keywords: attack; cluster; data; head; hole; network; node; packets; route; routing; sensor
       cache: aiti-445.pdf
  plain text: aiti-445.txt

        item: #101 of 148
          id: aiti-4529
      author: Zong-Yu Chang; Xin Duan; Zhong-Qiang Zheng; Lin Zhao; Yu-Hu Yang; Xian-Yi Zhou; Peng Zhu; Jing-Wen He
       title: Nonlinear Dynamic Analysis of Direct Acting Tensioner of an Offshore Floating Platform
        date: 2020-07-01
       words: 3187
      flesch: 59
     summary: Dynamics modeling of the riser system The model of direct acting riser tensioner with the floating platform and riser system is shown in Fig. Scholars have carried out related researches on the performance of riser tensioners.
    keywords: displacement; fig; model; motion; riser; system; tensioner
       cache: aiti-4529.pdf
  plain text: aiti-4529.txt

        item: #102 of 148
          id: aiti-4793
      author: Yassin-Kassab, Hamed ; Marius-Corneliu Rosu
       title: An Overview of Own Tracking Wireless Sensors with GSM-GPS Features
        date: 2021-01-01
       words: 9140
      flesch: 54
     summary: [27] Y. Zhu, K. Sundaresan, and R. Sivakumar, “Practical Limits on Achievable Energy Improvements and Useable Delay Tolerance in Correlation Aware Data Gathering in Wireless Sensor Networks,” Second Conference IEEE SECON, Santa Clara, CA, USA, 2005, pp. [42] L. Jun and J. P. Hubaux, “Joint Mobility and Routing for Lifetime Elongation in Wireless Sensor Networks,” Proceedings of 24th Annual Joint Conference of the IEEE Computer and Communications Societies, vol. 3, pp.
    keywords: consumption; data; energy; fig; gprs; gps; gsm; hardware; ieee; mobile; networks; power; protocols; sensor; sensor networks; software; system; technology; time; tracking; transmission; vol; wireless
       cache: aiti-4793.pdf
  plain text: aiti-4793.txt

        item: #103 of 148
          id: aiti-521
      author: Hong, Chih-Chiang; Chang, Cheng-Long; Huang, Chun-Chen; Yang, Chi-Ching; Lin, Chien-Yu
       title: CAE Analysis of Secondary Shaft Systems in Great Five-axis Turning-Milling Complex CNC Machine
        date: 2017-10-20
       words: 3963
      flesch: 74
     summary: The main co mponents of secondary shaft system are screw shaft and base. 2. External pressure loads on left-end of screw shaft and hydraulic pressure loads on the base in secondary shaft system for the screw shaft locates at top position typically is also shown.
    keywords: cop; fig; screw; shaft; stress
       cache: aiti-521.pdf
  plain text: aiti-521.txt

        item: #104 of 148
          id: aiti-5294
      author: Korniejenko, Kinga; Michał Łach; Maria Hebdowska-Krupa; Janusz Mikuła
       title: Impact of Flax Fiber Reinforcement on Mechanical Properties of Solid and Foamed Geopolymer Concrete
        date: 2021-01-01
       words: 5638
      flesch: 56
     summary: Keywords: geopolymer, mechanical properties, foamed material, flax fiber 1. The results show the positive effect of the addition to flax fibers on impact bending and flexural strength [38].
    keywords: composites; fiber; flax; geopolymer; materials; metakaolin; properties; strength; vol
       cache: aiti-5294.pdf
  plain text: aiti-5294.txt

        item: #105 of 148
          id: aiti-5307
      author: Wong, Tzu-Tsung; Hung, Shih-Hsuan
       title: The Impact of Coating Ingredients on the Aging Resistance of Topcoat Paints by Model Trees
        date: 2021-01-01
       words: 4902
      flesch: 62
     summary: Keywords: accelerated aging test, linear regression, model tree, numeric prediction, topcoat paint 1. Topcoat paint can protect buildings from erosion and the function of undercoat paint is to increase the adhesion of topcoat paint.
    keywords: color; data; gloss; model; paint; pigment; proportion; resin; topcoat; vol
       cache: aiti-5307.pdf
  plain text: aiti-5307.txt

        item: #106 of 148
          id: aiti-5385
      author: Zhang, Ye; Zhang, Kun; Chen, Kaidi; Xu, Zhen
       title: Real Time Scanning-Modeling System for Architecture Design and Construction
        date: 2020-09-01
       words: 4562
      flesch: 51
     summary: Architectural form is mainly decided by the designer, while material data is often treated as an afterthought which doesn’t factor in decision-making directly. Keywords: scanning-modeling system, material data, computational design, robotic construction 1.
    keywords: branch; construction; data; design; fig; information; material; modeling; system; time
       cache: aiti-5385.pdf
  plain text: aiti-5385.txt

        item: #107 of 148
          id: aiti-5476
      author: Jonathan Salar Cabrera; Ariel Roy Luceño Reyes; Cindy Almosura Lasco
       title: Multicriteria Decision Analysis on Information Security Policy: A Prioritization Approach
        date: 2021-01-01
       words: 4616
      flesch: 49
     summary: The result reflects that the DORSU implementation for information security policy is imbalanced. [1] R. Anderson, “Why Information Security is Hard: An Economic Perspective,” Proc.
    keywords: aspects; availability; confidentiality; information; integrity; management; matrix; security; technology
       cache: aiti-5476.pdf
  plain text: aiti-5476.txt

        item: #108 of 148
          id: aiti-5645
      author: Chen, Fu-Chen; Tzeng, Yih-Fong; Hsu, Meng-Hui
       title: Innovative Design of an Elliptical Trainer with Right Timing of the Foot Trajectory
        date: 2020-07-01
       words: 5846
      flesch: 67
     summary: From the vector loop diagram of the innovative elliptical trainer mechanism in Fig. 4, the following two vector loop equations can be derived as: 2 4 1r r r 0   (1) 5 6 7 8 9r r r r r 0     (2) Decomposing the vectors in Eq. B ( ) 7 9 5 52r r r sin (38) 2 2 2 2 2 5 6 7 8 9 5 8 5 5 9 5C r r r r r 2r r cos 2r r cos        (39)
    keywords: design; foot; pedal; r r; r sin; trajectory
       cache: aiti-5645.pdf
  plain text: aiti-5645.txt

        item: #109 of 148
          id: aiti-6453
      author: Rinchumphu, Damrongsak; Phichetkunbodee, Non; Pomsurin, Nakarin; Sundaranaga, Chawanat; Tepweerakun, Sarote; Chatchawan Chaichana
       title: Outdoor Thermal Comfort Improvement of Campus Public Space
        date: 2021-04-01
       words: 4181
      flesch: 58
     summary: 3 Models showing approach for outdoor area design by ENVI-met version 4.4 program 4. 1 Aerial view of Lan Witsawa Ruamjai, Chiang Mai University Fig. 2 2D model of study area presented in ENVI-met version 4.4 Advances in Technology Innovation, vol.
    keywords: alternative; area; chiang; comfort; pet; study; temperature; trees; vol
       cache: aiti-6453.pdf
  plain text: aiti-6453.txt

        item: #110 of 148
          id: aiti-6494
      author: Chung, Yi-Hua; Jun-Fu Huang; Yuan-Chen Hu; Huang, Chen-Kang 
       title: Development of a Small Intelligent Weather Station for Agricultural Applications
        date: 2021-04-01
       words: 8358
      flesch: 59
     summary: For future work, we hope to increase the amount of lightning data by trying to use multiple weather boxes to collect data in the same area at the same time. As the high density of the orange dots that denote raining between the humidity of 70% and80% in the humidity- pressure graph in Fig. 10, this situation implies that the prediction models might have had the wrong prediction in this zone caused by the high density.
    keywords: box; data; lightning; model; prediction; rain rain; rainfall; recall; table; taipei; vol; weather; weather box
       cache: aiti-6494.pdf
  plain text: aiti-6494.txt

        item: #111 of 148
          id: aiti-6517
      author: Lee, Woo-Joo ; Jhang, Hyo-Jin; Choi, Seung Hoe
       title: Fuzzy Study on the Winning Rate of Football Game Betting
        date: 2021-05-13
       words: 5914
      flesch: 67
     summary: It was found that the winning rate for KNF team was influenced by the match location, ELO rating, team performance, and match importance. Since modern football has been first introduced to Korea, KNF team has played a total of 941 games, with a winning percentage of 54.3% [11].
    keywords: football; knf; match; rate; regression; team; winning
       cache: aiti-6517.pdf
  plain text: aiti-6517.txt

        item: #112 of 148
          id: aiti-6666
      author: Chen, Shang-Yuan; Chen, Tzu-Tien 
       title: Dockless Shared Bicycle Flow Control by Using Kernel Density Estimation Based Clustering
        date: 2021-04-12
       words: 5918
      flesch: 60
     summary: As a consequence, this study relies on observations and analysis of dockless shared bicycles in Shanghai, China to gain a better understanding of dockless shared bicycles and methods of improving their effectiveness, as well as specific methods of making them more acceptable to city residents and a more important means of transportation. The following explains the clustering principles of the docking and dockless shared bicycles, and the differences between the two.
    keywords: area; bicycle; bikes; check; clustering; density; incentive; level; system; vol
       cache: aiti-6666.pdf
  plain text: aiti-6666.txt

        item: #113 of 148
          id: aiti-6724
      author: Bonnaud, Olivier
       title: Innovative Strategy to Meet the Challenges of the Future Digital Society
        date: 2021-04-01
       words: 5532
      flesch: 41
     summary: Indeed, designers and manufacturers have tried in the past to bring new products with new functions to the market as quickly as possible, regardless of energy consumption and environmental impact. Energy consumption challenges The consequence of this exponential growth is that the energy consumed by connected objects is also growing exponentially and is becoming globally preponderant
    keywords: challenges; consumption; digital; energy; innovation; microelectronics; network; objects; training; vol
       cache: aiti-6724.pdf
  plain text: aiti-6724.txt

        item: #114 of 148
          id: aiti-6863
      author: Wang, Tianyi; Okada, Shima; Makikawa, Masaaki ; Endo, Masayuki; Ohno, Yuko
       title: Influence of Cold Sensation on Plantar Tactile Sensation for Young Females
        date: 2021-04-01
       words: 3926
      flesch: 63
     summary: In [2], we reported that plantar sensation thresholds were higher for the CS group (n = 18) than the non-CS group (n = 11) and that young females with CS were less sensitive at the foot than the healthy subjects. Left part is the result of sensation threshold, and the right part is the result of response frequency.
    keywords: cold; foot; plantar; sensation; tactile; threshold; vol
       cache: aiti-6863.pdf
  plain text: aiti-6863.txt

        item: #115 of 148
          id: aiti-6930
      author: Nura Diana, Anita Intan; Fansuri, Subaidillah; Fatoni, Akhmad Feri
       title: An Experimental Study of Plastic Waste as Fine Aggregate Substitute for Environmentally Friendly Concrete
        date: 2021-05-27
       words: 5564
      flesch: 61
     summary: 0 5 10 15 20 25 0% 5% 10% 15% C o m p re s s iv e s tr e n g th v a lu e ( M p a ) Variation of plastic waste Fig. 11 Compressive strength relationship and plastic waste variations 3.6. -4.981 a. Dependent variable: Compressive strength Based on Table 18, it can be analyzed that the regression equation model for the simultaneous effect on compressive strength with plastic waste variation is Y = 235.162 – 9.560 X, compressive strength without the addition of variation of plastic bottle waste is X = 0, and the value of compressive strength is (Y) = 235.162 kg/cm 2 (19.518 MPa).
    keywords: aggregate; compressive; concrete; data; plastic; strength; table; test; waste
       cache: aiti-6930.pdf
  plain text: aiti-6930.txt

        item: #116 of 148
          id: aiti-7192
      author: Wang, Po-Tong; Lin, Shao-Yu; Sheu, Jia-Shing
       title: Vehicle Path Planning with Multicloud Computation Services
        date: 2021-08-17
       words: 4397
      flesch: 63
     summary: Keywords: computer vision, scene recognition, cloud computing, object detection 1. Obstacle detection can also performed by object detection, and the technique algorithm will be used to mark walkable areas and relative coordinates [20-21].
    keywords: area; cloud; detection; fig; object; path; planning; time; vision; vol
       cache: aiti-7192.pdf
  plain text: aiti-7192.txt

        item: #117 of 148
          id: aiti-7309
      author: Wariyatno, Nanang Gunawan ; Lie, Han Ay ; Hsiao, Fu-Pei ; Gan, Buntara Sthenly
       title: Design Philosophy for Buildings’ Comfort-Level Performance
        date: 2021-05-27
       words: 5641
      flesch: 61
     summary: Introduction Japan is susceptible to strong earthquakes and volcanic eruptions owing to its location at the junction of four active tectonic plates: the Pacific, North American, Eurasian, and Philippine plates. Keywords: comfort-level, seismic intensity level (SIL), quantification, earthquake, design philosophy 1.
    keywords: acceleration; building; earthquake; fig; intensity; response; roof; sil; time; vol
       cache: aiti-7309.pdf
  plain text: aiti-7309.txt

        item: #118 of 148
          id: aiti-7330
      author: Dang Vu, Hiep; Phan, Duy Nguyen
       title: Experimental and Theoretical Analysis of Cracking Moment of Concrete Beams Reinforced with Hybrid Fiber Reinforced Polymer and Steel Rebars 
        date: 2021-06-30
       words: 8010
      flesch: 67
     summary: To overcome this drawback of FRP RC beams, many researchers proposed combining traditional steel bars to FRP bars in the tension zone of the concrete beam. By considering the recommendations in [20], the steel and FRP reinforcement ratios are selected to vary from 0% to a maximum 4% (i.e, the area of each type of reinforcements varies from 0 cm 2 to 67.2 cm 2 ).
    keywords: beams; concrete; cracking; frp; gfrp; hybrid; moment; reinforcement; steel
       cache: aiti-7330.pdf
  plain text: aiti-7330.txt

        item: #119 of 148
          id: aiti-7835
      author: Nguyen, Manh Tien; Nguyen, Truong An ; Tran, Duc Hoan; Le, Van Thao 
       title: Optimization of Superplastic Forming Process of AA7075 Alloy for the Best Wall Thickness Distribution
        date: 2021-08-17
       words: 4933
      flesch: 59
     summary: The SPF by compressed air pressure depends on many parameters such as forming pressure, deformation temperature, forming time, tool size, coefficient of friction, back pressure, etc. 1 Schematic diagram of the sheet SPF process As shown in Table 1, the limits of variables are denoted as -1, 0, and +1 for the lower value, middle value, and higher value, and the input variables are denoted as A for forming pressure (MPa), B for deformation temperature (°C), and C for forming time (min).
    keywords: deformation; degree; forming; parameters; pressure; process; thickness; thinning; time; vol
       cache: aiti-7835.pdf
  plain text: aiti-7835.txt

        item: #120 of 148
          id: aiti-7853
      author: Karami, Ali
       title: A Recursive Least-Squares Approach with Memorizing Factor for Deriving Dynamic Equivalents of Power Systems
        date: 2021-08-17
       words: 9389
      flesch: 63
     summary: The connection of a local machine to a multimachine system Letting ��� ≅ �� − �� and denoting the elements of matrix ���� as ��� = ��� + � ��, the active power and reactive power of the ith machine can be expressed as follows [32]: 2 1 ( cos sin ) n j i − − − = (9) where !�� is the input mechanical power (assumed constant), � is the rotor inertia constant, and #� is the natural damping coefficient of the ith machine.
    keywords: approach; equivalent; factor; fig; machine; memorizing; parameters; power; power system; system; time; tme; vol
       cache: aiti-7853.pdf
  plain text: aiti-7853.txt

        item: #121 of 148
          id: aiti-793
      author: Hsieh, Chen-Huei; Zh, Xui-Ze
       title: Development of an Automated Measurement System for Checking Irradiation Non-uniformity of Solar Simulators
        date: 2018-07-30
       words: 3981
      flesch: 52
     summary: Keywords: solar simulator, PV cell, solar module, irradiation non-uniformity, measurement 1. Once the irradiation non-uniformity is calculated, some operations are made to adjust the irradiation parameters of the solar simulator such that the irradiation non-uniformity can meet the specification, i.e., 2%, 5%, 10% for class A, B or C of solar module, respectively.
    keywords: arduino; fig; measurement; mega; module; robot; step
       cache: aiti-793.pdf
  plain text: aiti-793.txt

        item: #122 of 148
          id: aiti-7988
      author: Mohmmed, Jabbar Hussein; Tawfik, Mauwafak Ali; Atiyah, Qasim Abbas 
       title: Determination of Natural Frequency and Critical Velocity of Inclined Pipe Conveying Fluid under Thermal Effect by Using Integral Transform Technique
        date: 2021-10-06
       words: 7666
      flesch: 63
     summary: (6) can be rewritten in non-dimensional form as follows: ( ) 4 2 2 2 2 1 2 4 2 2 1 sin sin cos 2 0G N U G G U t t φ φ φ φ φ ζ θ θ θ β ζ ζ ζ ζ ∂ ∂ ∂ ∂ ∂ − − − − + ′ ′Γ Λ − − −
    keywords: fluid; frequency; n n; pipe; vol; − −
       cache: aiti-7988.pdf
  plain text: aiti-7988.txt

        item: #123 of 148
          id: aiti-803
      author: Machacek, Josef; Pichal, Radek
       title: Single-Crossarm Stainless Steel Stayed Columns
        date: 2018-01-01
       words: 4192
      flesch: 62
     summary: [8] R. R. Araujo, S. A. L. Andrade, P. C. G. S. Vellasco, J. G. S. Silva, and L. R. O. Lima, “Experimental and numerical as sessment of stayed steel columns ,” Journal of Constructional Steel Research, vol. Received 05 June 2017; received in revised form 04 July 2017; accept ed 11 August 2017 Abstract Stability and strength of imperfect stayed columns are studied in 3D using ANSYS software.
    keywords: analysis; buckling; column; fig; stays; steel
       cache: aiti-803.pdf
  plain text: aiti-803.txt

        item: #124 of 148
          id: aiti-804
      author: Tsai, Ming-June; Lung, Hsueh-Yung
       title: Point-Structured Human Body Modeling Based on 3D Scan Data
        date: 2017-10-20
       words: 4231
      flesch: 70
     summary: Recently, a novel method of body feature e xtract ion fro m a ma rke r -less scanned body was presented [10-11], in which the description of human body features are interpreted into logica l mathemat ical defin itions. In order to e xt ract these feature lines and feature points fro m the 3D scanned point cloud automatica lly, the se mantic definit ions of body features are needed to be interpreted into the mathemat ical definit ions.
    keywords: body; data; feature; fig; girth; human; model; motion; point; vol
       cache: aiti-804.pdf
  plain text: aiti-804.txt

        item: #125 of 148
          id: aiti-805
      author: Nascu, Ioana; Nascu, Ioan
       title: Improving Activated Sludge Wastewater Treatment Process Efficiency Using Predictive Control
        date: 2018-02-20
       words: 6199
      flesch: 67
     summary:            (22) 1 ( 1) 1 0 1 ( ) ( ) ( ) [ ( ) ... ] The results show that this control strategy can be efficiently used for dissolved oxygen control in WWTP.
    keywords: control; gpc; process; t n; u t; y t;  
       cache: aiti-805.pdf
  plain text: aiti-805.txt

        item: #126 of 148
          id: aiti-806
      author: Raghavan, Madhusudan; He, Yong Sheng
       title: A Comparison of Automotive Waste Heat Recovery Systems
        date: 2018-07-30
       words: 4835
      flesch: 58
     summary: Keywords: waste heat recovery systems, turbo-compounding, organic Rankine cycle, thermoelectrics 1. Introduction Fig. There have been numerous prior studies on waste heat recovery systems based on thermoelectric generators (TEGs) for potential automotive applications.
    keywords: cycle; energy; engine; exhaust; fig; fuel; gas; heat; model; power; system; teg; temperature; turbo; vehicle
       cache: aiti-806.pdf
  plain text: aiti-806.txt

        item: #127 of 148
          id: aiti-808
      author: Chen, Tzu-Hsia; Hsieh, Long-Chang
       title: The Innovative Design of the Massage Mechanisms for Massage Chair
        date: 2019-03-18
       words: 3010
      flesch: 64
     summary: 10 Atlas of feasible massage mechanisms of (5, 5) generalized chain (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) Fig. 11 Atlas of feasible designs for massage mechanism of (6, 6) generalized chain Advances in Technology Innovation, vol. [8] H. S. Yan, “A methodology for creative mechanism design,” Mechanism and Machine Theory, vol.
    keywords: design; fig; kneading; massage; mechanism
       cache: aiti-808.pdf
  plain text: aiti-808.txt

        item: #128 of 148
          id: aiti-8098
      author: Tayade, Vinod Pralhad; Lahudkar, Swapnil Laxman
       title: Implementation of 20 nm Graphene Channel Field Effect Transistors Using Silvaco TCAD Tool to Improve Short Channel Effects over Conventional MOSFETs
        date: 2021-10-05
       words: 6647
      flesch: 69
     summary: Graphene FETs are one of the alternatives of MOSFETs due to the excellent properties of graphene material. The mobility of graphene material is high, and hence it can be used as a channel material for small geometry devices.
    keywords: channel; device; fet; gate; graphene; material; mosfet; silicon; vol
       cache: aiti-8098.pdf
  plain text: aiti-8098.txt

        item: #129 of 148
          id: aiti-810
      author: S. Syan, Chanan; Ramsoobag, Geeta
       title: A Differential Evolution Optimization Approach for Parameters Estimation of Truncated and Censored Failure Time Data
        date: 2018-07-30
       words: 5299
      flesch: 56
     summary: This work outlines an investigation into the use of Heuristic techniques to estimate the parameters of a stochastic life distribution by using failure data with Truncation and Censoring. This approach was applied to failure data of a Gas Engine Power Generator utilized in Offshore Gas Production.
    keywords: beta; censoring; data; mse; nll; percentage; sample; truncation; values
       cache: aiti-810.pdf
  plain text: aiti-810.txt

        item: #130 of 148
          id: aiti-811
      author: Tsai, Shu-Yao; Lin, Hsiang-Yu; Lu, Guan-Yi; Lin, Chun-Ping
       title: Prediction Primary Available Blend Biodiesel of Waste Oil from Aurantiochytrium sp. for General Diesel Engines
        date: 2017-10-20
       words: 4707
      flesch: 58
     summary: Keywords: waste oil, Aurantiochytrium sp., biodiesel, winterization, blend biodiesel 1. Here, the heat of combustion, kinematic viscosity, and storage safety of blend biodiesel were tested by DSC
    keywords: aurantiochytrium; b100; biodiesel; blend; fatty; oil; temperature; vol; waste
       cache: aiti-811.pdf
  plain text: aiti-811.txt

        item: #131 of 148
          id: aiti-813
      author: Lien, Cheng-Chang; Ting, Ching-Hua
       title: Piglets Comfort with Hot Water by Biogas Combustion under Controllable Ventilation
        date: 2018-02-20
       words: 4507
      flesch: 48
     summary: Forced ventilat ion of 1.7 A CH (air change rate per hour) at 28°C could keep the pigsty comfort in terms of indoor temperature, relative humidity, and carbon -dioxide concentration. mid ity for its right front (RF), right rear (RR), le ft front (LF), le ft rear (LR), right front down (RFD) and right rear down (RRD) Temperature (°C) Air change rate per hour (ACH) Relative humility (%) Air change rate per hour (ACH) 1.7 ACH 3.4 ACH 5.1 ACH 1.7 ACH 3.4 ACH 5.1 ACH RF 30.17±0.86 *1 29.57±0.84 30.09±0.74 RF 66.76±9.69 75.71±9.21 65.37±7.37 RR 28.29±0.39 28.71±0.40 28.24±0.28 RR 77.05±6.30 81.67±6.02 77.23±4.57 LF 29.93±0.73 29.44±0.71 - *2 LF 69.26±9.05 77.91±8.74 - *2 LR 28.32±0.44 28.82±0.43 28.02±0.30 LR 84.96±8.92 86.37±2.77 83.40±2.05 RFD 27.03±0.52 27.71±0.53 27.12±0.43 RFD 87.41±3.74 89.29±4.57
    keywords: ach; air; biogas; carbon; change; heat; hot; pigsty; rate; temperature; ventilation
       cache: aiti-813.pdf
  plain text: aiti-813.txt

        item: #132 of 148
          id: aiti-816
      author: Ferng, Sophia; Ting, Ching-Hua; Wu, Chien-Ping; Lu, Yung-Tsong; Hsu, Cheng-Kuang; Chiou, Robin Yih-Yuan
       title: Energy-effective Predictive Temperature Control for Soy Mash Fermentation Based on Compartmental Pharmacokinetic Modelling
        date: 2018-02-20
       words: 3935
      flesch: 70
     summary: Heat energy is supplied fro m Co mpart ment 3 to Co mpart ment 1 via water circulation. The ambient te mperature is the key factor that influences the effic iency of heat pump operation [11].
    keywords: energy; heat; mash; ment; mpart; pump; soy; temperature; water
       cache: aiti-816.pdf
  plain text: aiti-816.txt

        item: #133 of 148
          id: aiti-818
      author: Smejkal, Vladimír; Kodl, Jindřich
       title: Dynamic Biometric Signature - an Effective Alternative for Electronic Authentication
        date: 2018-07-30
       words: 7361
      flesch: 51
     summary: Keywords: biometric authentication methods, dynamic biometric signature, electronic signature, authentication 1. [4] V. Smejkal and J. Kodl, “Strong authentication using dynamic biometric signature,” Proc. of 45th Annual 2011 IEEE International Carnahan Conf.
    keywords: authentication; compliance; dbs; degree; devices; dynamic; level; people; signature; stability; technology; test
       cache: aiti-818.pdf
  plain text: aiti-818.txt

        item: #134 of 148
          id: aiti-819
      author: Chiang, Ching-Shoei; Li, Hung-Chieh
       title: Area-Construction Algorithms Using Tangent Circles
        date: 2020-04-01
       words: 4761
      flesch: 74
     summary: In addition, the circle packing problems, i.e., the arrangement of circles with same or different radii inside a specified area, were also investigated by researchers [9-11]. Given n distinct ordered points pi, where i = 0, …, n, a set of circles has to be found, Ci, whose circles are centered at these points pi, and each circle is tangent to its neighboring circles.
    keywords: algorithm; area; circles; fig; radius; tangent
       cache: aiti-819.pdf
  plain text: aiti-819.txt

        item: #135 of 148
          id: aiti-8308
      author: Barreto, Fabian; Sarvaiya, Jignesh; Patnaik, Suprava
       title: Learning Representations for Face Recognition: A Review from Holistic to Deep Learning
        date: 2022-08-05
       words: 8853
      flesch: 53
     summary: [4] L. Sirovich, et al., “Low-Dimensional Procedure for the Characterization of Human Faces,” Journal of the Optical Society of America A, vol. 4, pp. [5] M. Ballantyne, et al., “Woody Bledsoe:
    keywords: accuracy; computer; conference; et al; face; features; fig; gabor; ieee; images; learning; model; neural; recognition; representation; vision; vol
       cache: aiti-8308.pdf
  plain text: aiti-8308.txt

        item: #136 of 148
          id: aiti-8364
      author: Nusrat Jahan Prottasha; Anik Tahabilder; Md Kowsher; Md Shanon Mia; Khadiza Tul Kobra
       title: Short-Term Rainfall Prediction Using Supervised Machine Learning
        date: 2023-04-01
       words: 5074
      flesch: 56
     summary: Therefore, rain prediction accuracy may vary depending on the dataset characteristics. For this reason, various machine learning classifiers have been implemented.
    keywords: accuracy; classifier; data; dataset; feature; learning; machine; model; prediction; rain; rainfall; vol
       cache: aiti-8364.pdf
  plain text: aiti-8364.txt

        item: #137 of 148
          id: aiti-8492
      author: Lee, Changro
       title: Clustering Analysis with Embedding Vectors: An Application to Real Estate Market Delineation
        date: 2021-11-30
       words: 6245
      flesch: 52
     summary: Clustering is a de facto standard tool employed in unsupervised learning and is extensively used as a technique for discovering hidden patterns in data, such as consumer groups based on demographic profiles, or real estate submarkets based on property characteristics [5]. This study attempts to construct real estate submarkets by exploiting the entity embedding approach.
    keywords: algorithm; approach; clustering; data; distance; embedding; entity; estate; euclidean; market; study; variables; vol
       cache: aiti-8492.pdf
  plain text: aiti-8492.txt

        item: #138 of 148
          id: aiti-8504
      author: Srilatha, Madhunala ; Bharathi, Anantha 
       title: Low Access Latency and High Throughput for Full-Duplex Cognitive Radio Using Mobility Caching Placement Strategy
        date: 2022-03-14
       words: 5554
      flesch: 58
     summary: (24) where Ni is the number of samples when PU begins with i th decision point, Di denotes the event when PU is detected at i th decision once transmission starts, and ��� represents the complementary event when PU is not detected during ith decision. In the above equation, ���� is the signal which needs to be identified, ���� is the Gaussian noise which is additive white in nature, and n is the sample index.
    keywords: duplex; latency; mcps; performance; radio; throughput; transmission; vol
       cache: aiti-8504.pdf
  plain text: aiti-8504.txt

        item: #139 of 148
          id: aiti-8618
      author: Gopikuttan, Lasithan Lasyam; Veettil, Shouri Puthan; Govindan, Rajesh Vazhayil
       title: Maintenance Initiation Prediction Incorporating Vibrations and System Availability
        date: 2022-03-11
       words: 8728
      flesch: 54
     summary: The proposed model creates the wear in the raceways of the bearing of a Class I machine intentionally, and the resultant vibrations above the alert limit can be measured and recorded using vibration measurement systems. This curve can be used to explain various stages of system failure, i.e., failure initiation (I), potential failure (P), and functional failure (F).
    keywords: availability; bearing; failure; life; limit; load; maintenance; system; time; velocity; vibration; vibration velocity; vol
       cache: aiti-8618.pdf
  plain text: aiti-8618.txt

        item: #140 of 148
          id: aiti-8714
      author: Bui Manh, Cuong ; Nguyen Van, Duong; Do Van, Si ; Phan Van, Manh; Le, Van Thao
       title: Effects of the Vibration Amplitude in Vibratory Stress Relief on the Fatigue Life of Structures
        date: 2021-12-24
       words: 5070
      flesch: 61
     summary: Residual stress and fatigue limit The results of measuring residual stress according to ASTM E837-13a include a variety of stress components. This research aims to investigate the effects of vibration amplitude in vibratory stress relief (VSR) on the fatigue strength of structures with residual stress.
    keywords: acceleration; amplitude; fatigue; fig; limit; samples; specimens; stress; test; vol; vsr
       cache: aiti-8714.pdf
  plain text: aiti-8714.txt

        item: #141 of 148
          id: aiti-8739
      author: Kollipara, Vamshi ; Peddakrishna, Samineni
       title: Circularly Polarized Antennas Using Characteristic Mode Analysis: A Review
        date: 2022-03-08
       words: 8767
      flesch: 56
     summary: From a future perspective, if CP antennas can fulfill the needs of long-distance communication as done by high gain linearly polarized antennas, the CM-based approach becomes attractive in antenna designs. Studies have also indicated how to optimize CP antenna designs for two linear modes using MTS.
    keywords: antenna; cma; current; design; feed; fig; ieee; modes; patch; phase; radiation; slot; vol
       cache: aiti-8739.pdf
  plain text: aiti-8739.txt

        item: #142 of 148
          id: aiti-8909
      author: Seba, Mohamed Rida; Kebdani, Said
       title: Finite Element and Neural Network Based Predictive Model to Determine Natural Frequency of Laminated Composite Plates with Eccentric Cutouts under Free Vibration
        date: 2022-03-14
       words: 5860
      flesch: 62
     summary: Based Predictive Model to Determine Natural Frequency of Laminated Composite Plates with Eccentric Cutouts under Free Vibration Mohamed Rida Seba * , Said Kebdani Applied Mechanics Laboratory, Faculty of Mechanical Engineering, University of Science and Technology Oran Mohamed-Boudiaf, Oran, Algeria Received 12 November 2021; received in revised form 29 December 2021; accepted 30 December 2021 DOI: https://doi.org/10.46604/aiti.2022.8909 Abstract This research proposes a predictive model to identify changes in the mechanical and geometrical properties of composite plates with eccentric cutouts based on natural frequency. Conclusions In this study, a neural-network-based approach is proposed to assess changes in the geometrical and mechanical properties of composite plates through the prediction of natural frequency.
    keywords: ann; composite; frequency; model; plates; vibration; vol; ∂ ∂
       cache: aiti-8909.pdf
  plain text: aiti-8909.txt

        item: #143 of 148
          id: aiti-8933
      author: Mohd Sani, Mohd Syahrul Hisyam; Muftah, Fadhluhartini; Mohsan, Nor Maslina; Kado, Bishir 
       title: Behavior of Built-Up Cold-Formed Steel Stub Columns Infilled with Washed Bottom Ash Concrete
        date: 2022-03-14
       words: 6724
      flesch: 62
     summary: CFS channel section is clean and clear before starting by checking the material properties of the section using a coupon tensile test specimen. There are four parts of the testing conducted: material properties of CFS, material properties of WBA concrete, mechanical properties of the connection, and mechanical behavior of built-up CFS stub columns.
    keywords: cfs; column; concrete; fig; load; material; section; specimen; steel; strength; vol; wba
       cache: aiti-8933.pdf
  plain text: aiti-8933.txt

        item: #144 of 148
          id: aiti-9080
      author: Nastain; Suripin; Yuwono, Nur; Sriyana, Ignatius
       title: Wave Transmission and Energy Dissipation in a Box Culvert-Type Slotted Breakwater
        date: 2022-06-08
       words: 4329
      flesch: 64
     summary: However, no attention has been paid to the cross-sectional shape of the hole used, despite the important effect of the hole height (hL) and length (B) on the performance of a perforated breakwater in reducing wave height (Hi) and incident wave energy (Ei). Furthermore, the use of a box culvert-type with a relatively large hole length (B) is expected to increase the effectiveness of the breakwater in reducing wave height and energy with a large hole porosity (ε).
    keywords: wave
       cache: aiti-9080.pdf
  plain text: aiti-9080.txt

        item: #145 of 148
          id: aiti-9227
      author: Ngoc, Tran Thanh; Dai, Le Van; Minh, Lam Binh
       title: Effects of Data Standardization on Hyperparameter Optimization with the Grid Search Algorithm Based on Deep Learning: A Case Study of Electric Load Forecasting 
        date: 2022-07-18
       words: 5846
      flesch: 61
     summary: The values of the optimal hyperparameters for the DL model Hyperparameter LSTM model CNN model Epoch (E) 100, 300, 500 300, 500, 700 Batch (B) 10, 30, 50 30, 50, 70 Optimizer (O) Adadelta, Adam, Adamax Adagrad, Adam, SGD Dropout rate (D) 0.1, 0.3, 0.5 - Filter (F) - 48, 80, 112 Kernel (K) - 3, 5, 7 Number of combinations (CFG) 81 243 4. [2] K. Amasyali, et al., “A Review of Data-Driven Building Energy Consumption Prediction Studies,” Renewable and Sustainable Energy Reviews, vol.
    keywords: adam; cnn; data; hyperparameters; max; methods; model; normalization
       cache: aiti-9227.pdf
  plain text: aiti-9227.txt

        item: #146 of 148
          id: aiti-9235
      author: Boyapati Bharathidevi; Jayendra Kumar
       title: Effect of PIN Diode Integration on Patch Antennas for Frequency Reconfigurable Antenna Applications
        date: 2023-07-04
       words: 4381
      flesch: 48
     summary: Keywords: biasing circuit, microstrip antenna, PIN diode switch, reconfigurable antenna, RF switch 1.  Advances in Technology Innovation, vol. 8, no. 3, 2023, pp. 210-218 English language proofreader: Chih-Wen Teng Effect of PIN Diode Integration on Patch Antennas for Frequency Reconfigurable Antenna Applications Boyapati Bharathidevi, Jayendra Kumar* School of Electronics Engineering, VIT-AP University, Amaravathi, Andhra Pradesh, India Received 10 January 2022; received in revised form 05 August 2022; accepted 04 May 2023 DOI: https://doi.org/10.46604/aiti.2023.9235 Abstract PIN diodes are commonly used to design reconfigurable antennas owing to their sufficient isolation, lower cost, and ease of fabrication.
    keywords: antenna; diode; pin; radiation; reconfigurable; state; switch; vol
       cache: aiti-9235.pdf
  plain text: aiti-9235.txt

        item: #147 of 148
          id: aiti-9252
      author: Hayakawa, Satoshi; Hoshi, Yoshikatsu; Oya, Hidetoshi
       title: Observer-Based Quadratic Guaranteed Cost Control for Linear Uncertain Systems with Control Gain Variation 
        date: 2022-06-09
       words: 6880
      flesch: 78
     summary: [13] proposed a design method for �� control for linear systems with addition control gain variation. A G C SΨ = +θ θ (39) 2 2 2 1 ( ) ( ) ( ) 1 G T T T T e e e e n e e T e e A S S
    keywords: control; t e; t t
       cache: aiti-9252.pdf
  plain text: aiti-9252.txt

        item: #148 of 148
          id: aiti-9854
      author: Jerome Jordan Faz Famadico
       title: Building Information Modeling in the Architecture and Construction Industry
        date: 2023-04-01
       words: 7655
      flesch: 49
     summary: 4.4. Approaches to implementing BIM Based on Table 4, respondents suggested that the AEC industry must increase the availability of BIM technologies and software to implement BIM. (4) The most common practices or approaches in addressing the challenges of BIM implementation were: increasing the availability of BIM technology, establishing BIM execution guidelines, innovating research for BIM technology, organizing the transition process from traditional practice to BIM, and conducting workshops on BIM.
    keywords: barriers; benefits; bim; building; construction; data; design; implementation; project; research; respondents; risks; study; technology
       cache: aiti-9854.pdf
  plain text: aiti-9854.txt