id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
alkej-113	Younis, Karem Muhsin; Jabber, Adil Shbeeb; Abdulrazaq, Mustafa Mohammed	Experimental Evaluation and Finite Element Simulation to Produce Square Cup by Deep Drawing Process	2018	13	.pdf	application/pdf	5429	242	55	therefore modern researches focus on the optimum values of these process parameters for non-symmetrical deep drawing parts ( square, rectangular, triangular and hexagonal shapes), in the field of square deep drawing process more researches have been focused. [6] to investigate the effect of the blank holder force on wall thickness, cup depths, tearing and wrinkling in square deep drawing process experimentally and numerically via the LS-DYNA software are summarized as follows: the wall thickness distributions obtained by experimental and finite element method is seem to be showing generally errors of around 15%, it is observed that thickness of the cup wall gets thinner in the punch profile region and increased in thickness occur toward the edges of the cup section.	cache/alkej-113.pdf	txt/alkej-113.txt