id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
alkej-196	Sulaymon, Abbas H.; Abdul-Ahad, Muna Yousif; Alwared, Abeer I.	ازالة عكورة المياه باستعمال المطاط كوسط ترشيح	2017	9	.pdf	application/pdf	3935	189	60	The comparison drop for crumb rubber filter is lower than conventional sand about 42% reduction in pressure drop than sand filter and the conventional sand filter has a little enhancement in t design factors are the characteristics of the filter media including type of filter media, grain size and gradation, properties of wastewater solids to be filtered, and the rate of filtration. عباس ومنى وعبير Al-Khwarizmi Engineering Journal, Vol. 10, No. 2, P.P. Removal Water Turbidity by Crumb Rubber Media Abbas H. Sulaymon* Abeer I. Alwared *Department of Energy Engineering/ **,*** Department of Environmental Engineering *Email **Email: ***Email: (Received 9 December 2013; accepted 41 Abstract The removal of water turbidity by using crumb rubber filter was investigated .The present study was conducted to evaluate the effect of variation of influent water turbidity (10, 25 and 50 N rate (25, 45 and 65 l/hr) and bed depth (30 and 60 cm) on the performance of mono crumb rubber filter in response to the effluent filtered water turbidity and head loss development, and compare it with that of co Results revealed that 25 l/hr flow rate and 25 NTU influent turbidity were the best operating conditions. smaller media size and higher bed depth gave the best removal efficiency while higher media size lower head loss.	cache/alkej-196.pdf	txt/alkej-196.txt