id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
alkej-579	Mohammed, Malek M.; H. Radhi, Mazin A.; Nasir, Ali Yasseen	دراسة العوامل المؤثرة على انسيابية العامل المساعد (Al2O3 (ZnO – CuO/ مع مزج مزيتات مختلفة خلال القمع	2009	7	.pdf	application/pdf	2317	122	66	Figures (5 – 8) show that, the mass flow rate at (0.6 mm) reach to the maximum value because the size of catalyst particles increased the effect of lubricants in the flow becomes clear than the cut of small size., and then fall down because the flow depend mostly on the particles size of catalyst, the diameter of hole of the hopper which is (2 cm) is fixed and the size of particles became larger (0.72 mm), therefore, the particles were crowded and do not able to flow through hopper. Catalyst through Hopper before Tableting Process Al-Khwarizmi Engineering Journal Al-Khwarizmi Engineering Journal, Vol. 5, No. 4, PP 18-24 (2009) Studying the Factors Effect on the Flowability of (ZnO – CuO/ Al2O3) Catalyst with Blending of Different Lubricants through Hopper Malek M. Mohammed * Mazin A. H. Radhi ** Ali Yasseen Nasir * * Department of Chemical Engineering/Al-Khwarizmi College of Engineering/ University of Baghdad ** Al-Rayah State Company (Received 18 March 2008 ; accepted 21 May 2009 )	cache/alkej-579.pdf	txt/alkej-579.txt