id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
alkej-694	Aghdeab, Shukry H.; Abdulameer, Ahmed Ghazi; Abdulameer, Lujain Hussein; Mohammed, Atheer Rasim	امثيلية تاثير تغير مادة القطب على اداء عملية التشغيل بالشرارة الكهربائية(EDM) باستخدام طريقة تاكوشي	2020	11	.pdf	application/pdf	4493	240	69	In tested the influence of the electrical discharge machining parameters like, Pulse on Time (Ton), Pulse off Time (Toff), and Current (I) on Material Removal Rate (MRR) for stainless steel, the results were resolved by using variance analysis and Mohannad R. Ghanim Al-Khwarizmi Engineering Journal, Vol. 15, No. 4, P.P. 11- 21 (2020) 12 response graphs, it has been different collections of EDM process parameters are obtain higher MRR and better surface roughness (Ra) [7] studied the effect of EDM parameters such as current, pulsation on time and pulsation off time on surface roughness of steel 304 with dielectric solution of gas oil by supplied DC current values (10, 20, and 30A).	cache/alkej-694.pdf	txt/alkej-694.txt