id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
asir-55732	Zhang, Ningchao; Wang, Xufei; Xie, Zhiqiang; Duan, Tongjiang	Simulation Analysis of Keyway Shaft Cutting Based on Low Frequency Axial Vibration	2025	14	.pdf	application/pdf	4759	185	46	From equations (2) and (3), it can be seen that the magnitude and direction of the tool speed are changing during vibration cutting, and the maximum value of the tool vibration speed ν_t is ν_t=Aw, if the cutting speed is greater than or equal to the maximum speed of tool vibration, that is, ν_t≥Aw, there will be no process of separation between rake face and chip. 𝑥 = 𝐴 𝑠𝑖𝑛(𝑤𝑡 + 𝜙0) (1) 𝑥——Tool displacement; 𝐴——The amplitude of tool vibration; www.scholink.org/ojs/index.php/asir Applied Science and Innovative Research Vol. 9, No. 1, 2025 102 Published by SCHOLINK INC. 𝑤——The angular frequency of the tool vibration, 𝑤 = 2𝜋𝑓; 𝑓——Tool vibration frequency; 𝑡——Time; 𝜙0——The initial phase of tool vibration.	cache/asir-55732.pdf	txt/asir-55732.txt