Baltic Journal of Economic Studies 108 Vol. 9 No. 3, 2023 This is an Open Access article, distributed under the terms of the Creative Commons Attribution CC BY 4.0 1 State University "Uzhhorod National University", Ukraine (corresponding author) E-mail: olena.zayats@uzhnu.edu.ua ORCID: https://orcid.org/0000-0001-9904-8706 2 State University "Uzhhorod National University", Ukraine E-mail: tomash.yarema@uzhnu.edu.ua ORCID: https://orcid.org/0000-0002-6929-9122 3 Educational and Research Institute of International Relations, Taras Shevchenko National University of Kyiv, Ukraine E-mail: pryyatelchuk@gmail.com ORCID: https://orcid.org/0000-0002-5222-452X DOI: https://doi.org/10.30525/2256-0742/2023-9-3-108-115 DETERMINANTS OF INCREASING THE INNOVATION CAPACITY OF UKRAINE Olena Zayats1, Τomash Yarema2, Olena Pryiatelchuk3 Abstract. Modelling the development of innovative power is an integral tool for finding ways to ensure the country's competitiveness and post-war recovery to accelerate European integration processes using its technological uniqueness. The innovative vector of economic development is a priority mechanism for the formation of competitive positions at all levels of the world economic system. The main purpose of this paper is to use modelling to identify the key determinants of the development and increase of Ukraine's innovative power, which should be crucial for the post-war recovery of the domestic economy. Methodology. The econometric model describes the efficiency of the use of Ukraine's innovative capacity and highlights its weaknesses. It is necessary to pay special attention to them in the period of post-war reconstruction. Both a correlation matrix of these factors and a regression model of their interdependencies were developed based on the assessment of a number of determinants affecting the formation and growth of innovative power. Results. The econometric modelling made it possible to obtain statistically significant two-factor linear models in which the share of R&D costs and the number of innovative products implemented were the independent variables. The commercialisation of R&D, in particular patenting, which reflects the effectiveness of scientific activity, appears to be very important. Business shows the highest rates of technology implementation. It creates a platform for further stimulation and development of relevant innovations. Practical implications. In the context of European integration processes, it is important to highlight those factors that would become advantages for strengthening the innovative power of Ukraine and to use them as a priority in the formation of the state policy of post-war reconstruction. The intensity of research and development and the introduction of advanced innovations, the innovative activity of the society and its functionality depend on the effective innovation policy of the state, the current state of the economy, the availability of a systematised base of institutes and institutions ensuring scientific and technical activity, modernised infrastructure, specialised information and consulting centres, etc. Value/originality. It has been proved that the priority of the innovative component of the domestic state policy is an undeniable condition for the effectiveness of the development of the economic system at the present stage of turbulence in the conditions of the Russian-Ukrainian war. At the same time, the obvious advantages of innovativeness are cancelled out by the presence of high costs for the development of innovations, a decrease in the activity of commercialisation of inventions, and the imperfection of the intersectoral distribution of funds for research and development. Key words: innovation capacity, competitiveness, costs, commercialisation, technology, development. JEL Classification: C19, F02, O33 1. Introduction The intensification of competition at all levels of the world economic system, the emergence of an increasing number of market players, the formation of qualitatively new market segments, require each state to choose an innovative vector of economic development, moving towards the knowledge economy, effectively using it for its development and strengthening its innovative power. The importance of modelling the development of Ukraine's innovative Baltic Journal of Economic Studies 109 Vol. 9 No. 3, 2023 capacity is due to the need to find and choose ways to ensure such development, which would allow not only to strengthen its competitiveness, which is based on advancing to higher technological systems, changing the structure and basic characteristics of the functioning of socio-economic systems, but also to distinguish Ukraine among other European regions for its technological uniqueness. Despite the obvious advantages of the introduction of innovations in some areas, Ukraine suffers certain losses due to the incorrect distribution of funds between sectors, uncertainty of priorities for the implementation of domestic research developments, their lack of popularity in the business community, a decrease in the activity of commercialisation of inventions, etc. One of the methods of partial compensation of such losses is qualitative modelling of innovation activity, which is the key to the formation of an effective innovation policy of the state. The basis of this modelling is the development of a system of private forecasts of the main directions of innovative development. It will help to determine the factors that should become decisive for the growth of Ukraine's innovative power. In order to study on a scientific level the effectiveness of using the innovative potential of Ukraine, it's necessary to obtain additional information about the object of research with the help of economic and mathematical models reflecting the objective reality. As a rule, the goal of any research is to determine the parameters of the studied socio-economic object that meet certain requirements and criteria. In the process of research, it is necessary to change the value of the object's parameters and thus change the value of the indicator that meets the criteria. The research process ends when a set of values of the object's parameters is found, satisfying the given criteria with the given accuracy and reliability. 2. Econometric Modelling of the Efficiency of Ukraine's Innovation Capacity The process of building an econometric model involves the following steps: determining the empirical form of the model and selecting the influencing factors; checking the set of independent variables for multicollinearity; providing their availability, transforming the relevant variables or removing them from the list and replacing them with others; identifying the appropriate algorithm for analysing the model parameters; examining the obtained model (to determine the density of the connection, the adequacy of the model, to analyse the residuals); in accordance with the result obtained during the execution of the item, estimating the parameters of the model using other methods; making forecasts, economic and mathematical analysis of the model. A set of determinants to ensure stable growth of industrial production and sales of high-quality competitive products, creation of new import- substituting and export-oriented, knowledge-intensive and high-tech products, which will help to increase employment, social protection, budget revenues, and more: an increase in the specific weight of enterprises and organisations using an innovative product in all types of economic activity; annual growth in the volume of innovative products sold as a proportion of the total volume of products sold; a significant reduction in the time between scientific developments and their introduction into production; an annual increase in the ratio of the number of licences sold for intellectual property objects to the number of licences purchased; an increase in the production and use of innovative products in organisations and enterprises in the region, particularly by type of economic activity; technology transfer (Eurostat, 2021). In order to obtain an econometric model describing the efficiency of the use of Ukraine's innovative capacity, the following algorithm was used: Step 1 – establishing a cause-effect relationship between the identified and studied economic indicators – dependent variables; Step 2 – selecting significant independent factors and their characte- ristics and conducting correlation analysis to check the correlation dependence between variables; Step 3 – finding the parameters of the communi- cation function; Step 4 – finding, if possible, the regular relations between the indicator Y and all the considered factors and parameters and creating a mathematical description (model) of the economic phenomenon or process; Step 5 – assessing the reliability of the obtained results and their analysis; studying the found model and finding the density of the connection; adequacy of the model according to the result; estimating the model parameters using other methods; Step 6 – making a forecast using the model and its economic and mathematical analysis. The main task of mathematical modelling is to determine how accurately the constructed mathematical model reflects the relationship between the determinants considered, the parameters and the indicator that evaluates the properties of the real object. The next step was a correlation analysis. A distinction is made between paired and partial correlations. Paired characteristics are calculated on the basis of the results of the measurements of only the pair of characteristics under consideration. Therefore, they do not take into account the indirect or joint effect of other characteristics. Partial characteristics are purified from the influence of other factors, but for their calculation it is necessary to have initial information not only about the investigated characteristics, but also about all the others whose influence needs to Baltic Journal of Economic Studies 110 Vol. 9 No. 3, 2023 be eliminated. For quantitative characteristics, the Pearson correlation coefficient is most often used, which is calculated by the formula: r n x x y y n x x n y y k n k k j n j m n m � �� � �� � �� � � �� � � � � � � � 1 1 1 1 1 2 1 2 1 (1) In formula (1), xi, yi – are the values of n variables X and, respectively, while x, y are their arithmetic means. The Pearson correlation coefficient can be used to test the hypothesis of the significance of the relationship. The t-statistic is calculated for the sample correlation coefficient r, which has a Student's distribution with n-2 degrees of freedom and is calculated by the formula: t r n r � � � � 2 1 2 (2) There is a test to determine the significance of the correlation coefficient (how confidently it can be stated that it is different from zero). The null hypothesis H0 is tested that the true value of the correlation coefficient is zero: r = 0. An alternative hypothesis H1 is the hypothesis that r ≠ 0. By comparing the value of the t-statistic calculated from the sample using formula (2) with the critical points determined from the Student's distribution tables, the null hypothesis can be accepted or rejected. For a two-sided critical region of a given significance level α, the critical point tkp is found from the table as tkp = ta/2,m for the number of degrees of freedom m = n – 2. If |t| ≤ tkp, the hypothesis H0 is accepted, if |t| > tkp – the hypothesis H0 is rejected. The level of significance a = 1 – p is the probability of committing a type 1 error, that is, of rejecting the null hypothesis when it is correct. In this case, it is the probability that the correlation will be considered non-zero when it is equal to zero. Software using the R programming language was used to build regression models. Statistical data were processed using the statistical package R version 3.6.3 (The R Project, 2021). A convenient visual representation of the numerical values of the correlation coefficients is provided by the correlation diagram for the variables: x01 – number of organi- sations involved in R&D; x03 – expenditure on R&D, state budget (USD); x05 – expenditure on R&D, private sector (USD); x06 – share of implementation costs in GDP; x07 – number of innovatively active enterprises; x08 – patents for inventions (in thousands); x10 – volume of innovative products (goods, services) sold, USD; x11 – number of technologies purchased by industrial enterprises (transfer of technologies). The results are presented in Figure 1. As a result of the analysis, the following indicators (dependent variables) were selected: Y1 – R&D expenditures, state budget (USD) and Y2 – R&D expenditures, private sector (USD). Also, the next factors (independent variables) were selected: X1 – number of research and development organisations; X2 – share of R&D expenditure in GDP; X3 – number of innovatively active enterprises; X4 – patents for inventions (in thousands); X5 – volume of innovative products (goods, services) sold, USD; X6 – dynamics of the number of technologies acquired by industrial enterprises (technology transfer). The significance results are presented in Table 2. Table 1 Modelling data on the development of Ukraine's innovation capacity Expenditures on research and development, state budget, (USD), Y1 R&D expenditure, private sector, (USD), Y2 Number of organisations engaged in R&D, X1 Share of sales costs, GDP, X2 Number of innovatively active companies, X3 Patents for inventions, thsd., X4 Volume of innovative products (goods and services) sold, USD, X5 Dynamics of the number of technologies acquired by industrial enterprises (technology transfer), X6 2010 414416436,7 751593224,7 1610 0,70 1541 29,4 2716311166, 92 694 2011 462178168,1 758725313,4 1506 0,72 1578 28,6 2939598997,59 724 2012 590112155,4 777264956,2 1303 0,75 1462 30,4 2823904881,10 739 2013 538854067,6 771910137,7 1255 0,65 1679 30,7 3112265331,76 651 2014 247833819,8 369066011,4 1208 0,67 1758 29,7 1634968152,92 543 2015 172712131,2 310393196,7 1143 0,70 1715 26,1 944672131,18 1131 2016 135067737,2 271629131,8 999 0,60 1609 31 1090801526,74 1034 2017 172365781,9 282709292,2 978 0,55 824 29,7 1227927272,76 1209 2018 215031642,9 350277000 972 0,48 834 29,3 1397178571,44 1109 2019 278643713,1 296862869,2 963 0,45 759 30,6 2049071729,97 1198 2020 253479820,2 318956834,5 950 0,47 777 30,3 2140611510,79 1265 2021 272092185,2 342905660,4 950 0,50 782 31,2 2151486988,87 1145 Source: compared by the authors Baltic Journal of Economic Studies 111 Vol. 9 No. 3, 2023 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 0.8 1 x0 8 x1 1 x1 0 x0 3 x0 5 x0 1 x0 6 x0 7 x08 x11 x10 x03 x05 x01 x06 x07 Figure 1. Presentation of numerical values of correlation coefficients Source: compiled by the authors Table 2 Matrix of correlation coefficients Y1 Y2 X1 X2 X3 X4 X5 X6 X03 X05 X01 X06 X07 X08 X10 X11 X03 Pearson correlation Stat. error t-value p-value hypothesis 1 X05 Pearson correlation Stat. error t-value p-value hypothesis 0.94 0.11 8.80 <0.001 alternative 1 X01 Pearson correlation Stat. error t-value p-value hypothesis 0.68 0.23 2.92 0.015 alternative 0.86 0.16 5.24 <0.001 alternative 1 X06 Pearson correlation Stat. error t-value p-value hypothesis 0.54 0.27 2.04 0.069 basic 0.69 0.23 3.01 0.013 alternative 0.82 0.18 4.50 0.001 alternative 1 X07 Pearson correlation Stat. error t-value p-value hypothesis 0.33 0.30 1.10 0.296 basic 0.49 0.27 1.80 0.103 basic 0.67 0.24 2.84 0.018 alternative 0.88 0.15 5.86 <0.001 alternative 1 Baltic Journal of Economic Studies 112 Vol. 9 No. 3, 2023 Y1 Y2 X1 X2 X3 X4 X5 X6 X03 X05 X01 X06 X07 X08 X10 X11 X08 Pearson correlation Stat. error t-value p-value hypothesis 0.18 0.31 0.57 0.579 basic 0.01 0.32 0.04 0.968 basic -0.29 0.30 0.96 0.36 basic -0.41 0.29 -1.44 0.18 basic -0.36 0.30 -1.22 0.25 basic 1 X10 Pearson correlation Stat. error t-value p-value hypothesis 0.93 0.12 7.92 <0.001 alternative 0.87 0.16 5.56 <0.001 alternative 0.63 0.25 2.55 0.029 alternative 0.33 0.30 1.11 0.294 basic 0.16 0.31 0.51 0.62 basic 0.31 0.30 1.05 0.319 basic 1 X11 Pearson correlation Stat. error t-value p-value hypothesis -0.66 0.24 -2.79 0.019 alternative -0.75 0.21 -3.63 0.0046 alternative -0.79 0.19 -4.14 0.002 alternative -0.77 0.20 -3.78 0.004 alternative -0.77 0.20 -3.81 0.003 alternative -0.01 0.32 -0.02 0.985 basic -0.56 0.26 -2.16 0.056 alternative 1 Source: compiled by the authors (End of Table 2) The regression model for the indicator "research and development expenditures, state budget" is obtained: Y1 = 1,9∙108 – 2,9∙105 * X1 + 9,1∙108 * X2 – 9,6∙104 * * X3 – 8,4∙106 * X4 + 0,19 * X5 – 1,0∙105 * X6 (3) Assessing the value of the coefficient of determi- nation R2 = 0,958, it can be concluded that in the regression model, the coefficient X5 (p=0.00277) is "significant", and X2 (p=0.054) is "almost significant". The results of the assessments are presented in the Table 3. Table 3 Results of the quantile regression parameter for the dependent variable Y1 Correlation Value of assessment Statistic error t-value p-value Variables 1,9×108 7,1×108 0,268 0,79938 X1 -2,9×105 1,7×105 -1,742 0,14198 X2 9,1×108 3,6×108 2,506 0,05409 X3 -9,6×104 8,6×104 -1,106 0,31894 X4 -8,4×106 1,6×107 -0,515 0,62857 X5 1,9×10-1 3,5×10-2 5,475 0,00277 X6 -1,0×105 1,4×105 -0,772 0,47496 Source: compiled by the authors For the most significant variables X2 and X5 in the six-factor model, a two-factor model was constructed, which can be represented by the equation: Y1 = -2,5∙108 + 3,65∙108 * X2 + 0,17 * X5 (4) In the model represented by equation (4), both independent variables are statistically significant, since for X2 p-value is 0.02436, for X5 p-value is 0.00001. The coefficient of determination (R2) of the two-factor model decreased slightly compared to the previous version and is 0.924. More detailed characteristics of the model are given in Table 4. Table 4 Results of two-factor regression parameters for the dependent variable Y1 Correlation Value of assessment Statistic error t-value p-value Variables -2,5∙108 7,9∙107 -3,099 0,01274 X2 3,65∙108 1,4∙108 2,701 0,02436 X5 1,7∙10-1 1,9∙10-2 8,647 0,00001 Source: compiled by the authors The regression model for the indicator "research and development expenditures, private sector" is obtained: Y2 = -5,0∙108 – 1,8∙105 * X1 + 8,3∙108 * X2 – 5,6∙104 * * X3 – 6,8∙104 * X4 + 0,18 * X5 – 2,7∙104 * X6 (5) Assessing the value of the coefficient of determi- nation R2=0,945, it can be concluded that in the regression model, significance is observed only for the coefficient X5 (p=0.0268). The results of the assess- ments are presented in Table 5. Table 5 Results of the quantile regression parameter for the dependent variable Y2 Correlation Value of assessment Statistic error t-value p-value Variables -5,0×108 1,2×109 -0,421 0,6910 X1 1,8×105 2,8×105 0,632 0,5550 X2 8,3×108 6,1×108 1,350 0,2348 X3 -5,6×104 1,5×105 -0,386 0,7154 X4 -6,8×104 2,8×107 -0,002 0,9981 X5 1,8×10-1 5,8×10-2 3,101 0,0268 X6 -2,7×104 2,3×105 -0,120 0,9089 Source: compiled by the authors According to the results of building a six-factor model for the dependent variable Y2, only one independent Baltic Journal of Economic Studies 113 Vol. 9 No. 3, 2023 variable X5 was significant. Despite this, an attempt was made to build a two-factor model with indepen- dent variables X2 and X5. As a result, the following equation was obtained: Y2 = -5,1∙108 + 9,19∙108 * X2 + 0,21 * X5 (6) Both independent variables X2 and X5 in this model are significant, as the p-value in both cases is less than 0.001. The coefficient of determination (R2) of this model decreased by less than one percent and is 0.936. Other characteristics of the model are given in Table 6. Table 6 Results of two-factor regression parameters for the dependent variable Y2 Correlation Value of assessment Statistic error t-value p-value Variables -5,1∙108 1,1∙108 -4,815 0,00095 X2 9,19∙108 1,8∙108 5,063 0,00068 X5 2,1∙10-1 2,6∙10-2 8,085 0,00002 Source: compiled by the authors The correlation analysis showed that the density of the relationship between the dependent variable Y1 (R&D expenditures, state budget) and Y2 (business sector R&D expenditures) is the highest with the independent variables Х5, Х1, Х2. The pairwise correlation with the variable Х6 is also strong, although inverse in nature. Econometric modelling resulted in statistically significant two-factor linear models with Х2 and Х5 as independent variables. In the context of European integration processes, it is important to highlight those factors that would become advantages for strengthening Ukraine's innovative power. The commercialisation of research and development, in particular patenting, which reflects the effectiveness of scientific activity, is of great importance. Business has the highest rates of technology implementation, which creates a platform for further stimulation and development of relevant innovations. The number of technologies purchased by industrial enterprises determines the dynamics of development in this sphere, which also strengthens the position on international markets and creates a perspective for further cooperation between the industrial and scientific sectors. Unfortunately, for both the public and private sectors, the low level of realised products in relation to costs is a negative factor that can become an obstacle to the formation of international competitiveness at the European level. Similarly, the public sector's R&D expenditure as a percentage of GDP shows little dynamism, while European countries maintain these indicators at a level of 2.3-3.5%. 3. Practical Recommendations Based on the Results of Econometric Modelling To improve Ukraine's innovation capacity, it is important to take the following measures: – increasing the share of research and development expenditures in GDP; – promoting and encouraging the private sector to use and implement domestic scientific developments; – transforming public procurement into a mechanism for supporting innovation and creating demand for it; – unification of standards for high-tech products and industry-specific regulations in the relevant areas; – expanding motivational tools for commercialisation of research and development carried out at the expense of the state budget and creating conditions for successful interaction between science, the private sector and industry; – ensuring the development of high-tech priority industries, taking into account the specifics of value creation along the entire innovation chain (Heyman, Norbäck, Persson, 2021); – ensuring effective institutional and financial support for the innovation activities of all business entities at any level; – promotion of domestic technologies by organising joint events between the business and scientific sectors; – strengthening of investment attractiveness, which allows determining the maximum level of investment, as well as the parameters of investment efficiency in various industries and areas of activity based on business planning (Szopik-Depczyńska & etc., 2020); – guaranteeing an appropriate level of remuneration for highly qualified personnel for the performance of work and providing them with appropriate equipment for research and development; – improvement of the innovation monitoring and information system in order to provide relevant information to the relevant entities for making effective management decisions. Undoubtedly, the system of formation of state budget expenditures for the development of the innovative sphere in Ukraine needs significant transformation. As mentioned above, the amount of financial resources allocated to the development of innovative industries in Ukraine today is insufficient both in absolute and relative terms in comparison with the EU member states. It should be noted that the financing mechanism itself deserves special attention, which will be based on the results of a technical- technological and methodological audit of priority topics with a strategic orientation. From this point of view, the question of establishing a scientific advisory centre as a state institution, which would be authorised to carry out relevant examinations of grants, scientific works and projects, as well as to check scientific research and educational institutions Baltic Journal of Economic Studies 114 Vol. 9 No. 3, 2023 according to their scientific topics, seems important. This method involves a selective approach to the distribution of state funds and the selection of necessary and competitive research and development in the general system of scientific research. The issue of programme-initiative support of various innovation spheres, in which individual scientific directions are financed, remains relevant, for example: the National Nanotechnology Initiative, the Biotechnology Initiative of the USA and Ukraine Foundation, Euratom, the pan-European network of business incubators, and so forth (Kučera, Fiľa, 2022). Within the framework of the listed program- mes, the following deserve special attention: raising the technical and technological level of national scientific equipment, re-equipment of specialised centres for collective use of equipment, ensuring publication activity in the relevant fields, consulting support. Thus, on the basis of the simulation, it can be concluded that in Ukraine the share of private sector financing of innovative activity is higher in absolute terms than that of the state, although the specification of the respective injections is observed, since domestic business invests selectively in research and development, while the state provides for technology transfer, patenting and general development of scientific and innovative organisations. Equally important is the fact that the dynamics of business investment is negative because, on the one hand, interest in domestic research and development is being lost and companies are starting to buy foreign research and development and, on the other hand, as already mentioned, there is specialisation, i.e. companies do not cover all scientific fields. The private sector ensures a higher number of patents, the volume of implemented innovative products (goods, services) and the number of technologies purchased by industrial enterprises. The anti-crisis complex of economic development, which should be implemented in Ukraine in the coming years, requires the formation of a balanced innovation strategy. It is necessary to understand that the intensity of research and development and the introduction of advanced innovations, the innovative activity of the society and its functionality depend on the effective innovation policy of the state, the current state of the economy, the presence of a systematized base of institutes and institutions ensuring scientific and technical activity, modernized infrastructure, specialized information and consulting centers, etc. 4. Conclusions At present, the commercialisation of research and development, especially patenting, is very important as it reflects the effectiveness of scientific activity. This sector has the highest rates of technology implementation, which creates a platform for further stimulation and development of relevant innovations. The number of technologies purchased by industrial enterprises determines the dynamics of development of this sphere, which also strengthens the position on international markets and creates a perspective for further cooperation between the industrial and scientific sectors. Unfortunately, for both the public and private sectors, the low level of realised products in relation to costs is a negative factor that can become an obstacle to the formation of international competitiveness at the European level. Similarly, the public sector's R&D expenditure as a percentage of GDP shows little dynamism, while European countries maintain these indicators at a level of 2.3-3.5%. Despite the high potential of innovative activity, there is a considerable list of problems that prevent the full integration of Ukraine into the European innovation space. It is the innovative force that determines not only the current international competitiveness of high-tech products, highly qualified personnel, the effectiveness of the national innovation system and infrastructure, but also reveals and predicts the future, taking into account the challenges facing society. The responsiveness of state mechanisms and the private sector to the relevant time requirements characterises the readiness of the state for transformation and its integration into the international innovation system. Innovative power is not only based on existing developments, but also creates advantages for a breakthrough in priority strategic industries, which will be able to maintain the state's competitiveness at an appropriate level. Having a significant natural and acquired potential for the development of innovations, today in Ukraine there is a limited positive success of innovative activity, which is concentrated mainly in the field of IT technologies. Given the fact that one of the most important programmes for the EU today is the European Green Course, the main priority for Ukraine should be the development of green technologies, of which there are already successful examples, but this process needs significant scaling up. Before the large-scale invasion by Russia, the main obstacle to the ability of businesses to innovate and compete in international markets was the institutional imperfection of the Ukrainian state. Today, the key factors that will influence the development of the high-tech sphere in Ukraine in the short and medium term are the destructive impact of the ongoing military conflict (both from the point of view of the destruction of physical capital and the potential non-return of human capital that left the country as a result of the war) and the attainment of candidate status for EU membership, which opens up full access to the European research and development sphere and significant EU funding for scientific projects. Baltic Journal of Economic Studies 115 Vol. 9 No. 3, 2023 References: The R Project for Statistical Computing. Available at: https://www.r-project.org/ Sart, G. (2013). Effects of Technology Transfer Offices on Capacity Building in Creativy, Innovation and Entrepreneurship. The European Journal of Social & Behavioural Sciences, vol. 4, pp. 704–712. DOI: https://doi.org/10.15405/FutureAcademy/ejsbs(2301-2218).2012.4.5 Kučera, J., & Fiľa, M. (2022). R&D expenditure, innovation performance and economic development of the EU countries. Entrepreneurship and Sustainability, vol. 9. DOI: http://doi.org/10.9770/jesi.2022.9.3(14) Clemens, M. (2020). The emigration life cycle: How development shapes emigration from poor countries. IZA Institute of Labor Economics, no. 13614. Available at: https://docs.iza.org/dp13614.pdf Heyman, F., Norbäck, P., & Persson, L. (2021). Digitalisation, Productivity and Jobs: A European Perspective. The European Union and the Technology Shift, рр. 135–159. DOI: https://doi.org/10.1007/978-3-030-63672-2_6 Szopik-Depczyńska, K., Cheba, K., Bak, I., Kedzierska-Szczepaniak, A., Szczepaniak, K., & Loppolo, G. (2020). Innovation level and local development of EU regions. A new assessment approach. Land Use Policy, vol. 99. DOI: https://doi.org/10.1016/j.landusepol.2020.104837 Eurostat R&D expenditure in the EU at 2.3% of GDP in 2020. Last update: 2021. Available at: https://ec.europa.eu/ eurostat/web/products-eurostat-news/-/ddn-20211129-2 European Union а New Era for Research and Innovation. Communication from the commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions. 2020. Available at: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=COM%3A2020%3A628%3AFIN European commission Horizon Europe Research and innovation funding programme until 2027. European Union. 2022. Available at: https://ec.europa.eu/info/horizon-europe_en Eurostat Key figures on Europe 2021 edition. Luxembourg: Publications Office of the European Union. 2021. DOI: https://doi.org/10.2785/290762 Science, technology, and innovation: Gross domestic expenditure on R&D (GERD), GERD as a percentage of GDP, GERD per capita and GERD per researcher. UNESCO Institute of Statistics. Available at: http://data.uis.unesco.org/index.aspx?queryid=74 Eurostat Community Innovation Survey: latest results. European Commission. 2021. Available at: https://ec.europa.eu/eurostat/web/products-eurostat-news/-/ddn-20210115-2 Eurostat Research and development statistics at regional level. European Commission. 2019. Available at: https://ec.europa.eu/eurostat/statistics-explained/index.php?title=Research_and_development_statistics_at_ regional_level Received on: 29th of June, 2023 Accepted on: 12th of August, 2023 Published on: 25th of August, 2023