id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
brj-22889	Jin, Min; Li, Haoming; De, Xuehong; Suo, Bin; Zhang, Jianchao; Kang, Jianwen	Design and Simulation of Internal Planetary Wheel Plunger-Type Ring Molding Machine for Biomass Pellets	2024	11	.pdf	application/pdf	3935	193	61	DOI: 10.15376/biores.19.3.5599-5609 Keywords: Ring molding machine; Structural design; Fatigue life; Coupled simulation Contact information: a: College of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University, Hohhot, PR China; b: Inner Mongolia Engineering Research Center of Intelligent Equipment for the Entire Process of Forage and Feed Production, Inner Mongolia, Hohhot 010018, PR China; c: Inner Mongolia Yili Industrial Group Limited by Share Ltd, Jinshan Branch, PR China; #: These authors contributed equally to this work; *Corresponding author: dexuehong@126.com INTRODUCTION Biomass curing and molding technology can be used to process agricultural and forestry residues into blocks, rods, or pellets with certain shapes and densities through mechanical compression methods. According to domestic and international research, the main technical problems of ring molding include: a low effective compression molding rate of some of the ring molding machines put into production; and the traditional ring molding machine adopts the extrusion form of the outer curved surface of the die rolls, which is characterized by high cost, high energy consumption, and serious wear and tear of the key components (Huo et al. 2010;	cache/brj-22889.pdf	txt/brj-22889.txt