Microsoft Word - 1murphy.docx CHEMICAL ENGINEERING TRANSACTIONS VOL. 58, 2017 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Remigio Berruto, Pietro Catania, Mariangela Vallone Copyright © 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-52-5; ISSN 2283-9216 Mechanisation of Different Logging Operations: Environmental Impact Assessment using Life Cycle Assessment (LCA) Approach Andrea R. Proto*a, Jacopo Bacenettib, Giorgio Macrìa, Marco Fialac, Giuseppe Zimbalattia a Department of Agriculture, Mediterranean University of Reggio Calabria, Feo di Vito 89122, Reggio Calabria, Italy. b Department of Environmental Science and Policy. Università degli Studi di Milano, via Giovanni Celoria 2, 20133, Milan, Italy. c Department of Agricultural and Environmental Science. Università degli Studi di Milano, via Giovanni Celoria 2, 20133, Milan, Italy. andrea.proto@unirc.it Different logging systems (or harvesting systems) can be used for wood extraction. Cable logging system is typically carried out on steep slopes and other rough terrain. In these contexts, also cable yarding can be an efficient and effective harvesting system. Ninety-five per cent of timber production in southern Italy comes from terrain classified as very steep slope, limiting the use of machines for ground-based extraction. Cable extraction is a desirable alternative to either a skidder or forwarder on a sensitive site. To each harvesting system a different environmental load is associated depending on machine productivity and site characteristics. In this study, three different logging systems were analysed and compared using the Life Cycle Assessment approach. The compared logging systems are characterised by felling with chainsaw and three different extraction methods: by farm tractors equipped with a winch; by a skidder; and by a cable crane. The Full Tree harvesting method was adopted for both felling sites; trees were felled and transported to roadside with branches and top intact. The functional unit is 1 m 3 of wood; the system boundary involves all the operations carried out in the forestry (felling, bunching and extraction) and all the related inputs (diesel fuel, lubricating oil, capital goods such as chainsaw, tractors, skidder, cable yarder) and related emissions. Inventory data were collected in three different test sites located in southern Italy and concern working times, productivity, wood yield, fuel consumption. The cable yarder shows the worst performances for 7 of the 8 evaluated impact categories. The use of skidder shows a lower impact for 5 of the 8 evaluated impact categories while, for the remaining 3, the best performances are achieved by the logging system in which tractor is used. For climate change, the impact is equal to 8.57, 8.04 and 10.46 kg CO2eq/m 3 for the harvesting system with extraction carried out using tractor, skidder and cable yarder, respectively. 1. Introduction In Europe, energy policies are increasingly promoting the generation of energy from renewable sources (i.e. the European Union [EU] target of 27% renewable energy by 2030 and 40% of greenhouse gas [GHG] emission reduction) (European commission, 2014; Moneti et al., 2015). Among the different renewable sources, woody biomass is an interesting solution for energy generation in rural areas for both electricity and heat production (Caserini et al. 2010; Facciotto et al., 2014; Colantoni et al., 2016). Woody biomass can be produced from forestry management but also from dedicated plantations in which woody species are grown for energy purposes (Pierobon et al., 2015; Negri et al., 2016; Zambon et al., 2016). Wood extraction on steep slopes and other rough terrain has typically been associated with cable logging systems. Cable yarding proves to be an efficient and effective harvesting system for the extraction of timber on steep terrain, and their use in the mountainous regions of Europe is becoming more widespread. Nevertheless, in Italy, above all in southern regions, the use of this machinery is still limited (Zimbalatti and DOI: 10.3303/CET1758039 Please cite this article as: Proto A.R., Bacenetti J., Macri G., Fiala M., Zimbalatti G., 2017, Mechanisation of different logging operations: environmental impact assessment using life cycle assessment (lca) approach, Chemical Engineering Transactions, 58, 229-234 DOI: 10.3303/CET1758039 229 Proto, 2009). In forests where firewood is produced, cable cranes are not used at all. About 95% of timber production in southern Italy comes from very steep slope terrains where the use of machines for ground-based extraction is limited (Proto et al., 2016a). In this situation, cable extraction is a desirable alternative to either a skidder or forwarder (Macrì et al., 2016). Several studies previously carried out evaluated the economic performances of the different logging systems (Han et al., 2004; Putz et al., 2008; Proto et al., 2016b). For example, Proto and Zimbalatti (2016) highlighted that also for these machines requiring higher investment costs, sufficient margins of value for the producer emerged. Nevertheless, only limited researches have considered the environmental impact related to logging systems (Gonzalez-Garcia et al., 2009; Valente et al., 2011). Depending on machine productivity and site characteristics, each logging system shows its own environmental impact. Using the Life Cycle Assessment (LCA) approach, this study aims to analyse from an environmental point of view three different logging systems (or harvesting systems) composed by different logging operations and able to operate in forestry with medium and high sloped soils. 2. Materials and methods 2.1 Description of the logging systems Three different sites were monitored, each characterised by a harvesting system composed by a different sequence of logging operations. Globally the three sites cover an area of 35 ha. In all felling sites, “The Full Tree harvesting method” was adopted; therefore, the trees were felled and transported to roadside with branches and top intact. To each harvesting system, a different environmental performance is associated depending on machine productivity and site characteristics. In this study, the compared logging systems are characterised by felling with chainsaw and three different extraction methods (Figure 1). After felling (always carried out by 2 workers equipped with chainsaw): - in Site A (30% and 45% as average and maximum slope, respectively), bunching and extraction are carried out using a farm tractor equipped with a winch (in the following this harvesting system is referred to as "Harvesting system TRACTOR or HS-TR"); - in Site B (43% and 65% as average and maximum slope, respectively), bunching and extraction are performed by a skidder. Respect to the use of a farm trailer, this solution requires a higher initial investment, but achieves higher productivity above all rough terrains (in the following this harvesting system is referred to as "Harvesting system SKIDDER or HS-SK"); - in Site C (60% and 80% as average and maximum slope, respectively), the trees are directly extracted and brought till the roadside using a cable crane. This solution requires the highest investment, but can operate also with very steep sloped soils (in the following this harvesting system is referred to as "Harvesting systems CABLE CRANE or HS-CR"). Figure 1: Schematisation of the three compared harvesting systems. 2.2 Life Cycle Assessment LCA is a useful tool to determine the environmental impact of a product and service and has been widely used also for agricultural systems. The LCA approach foresees 4 steps: 1) goal and scope, functional unit and system boundary definition, 2) inventory data collection, 3) impact assessment and 4) results interpretation (ISO, 2006a, ISO, 2006b). In this study, the selected functional unit (the measurable unit reference to which all TRACTOR + WINCHCHAINSAW FELLING BUNCHING EXTRACTION TRACTOR + WINCHSITE A – HS_TR BUNCHING EXTRACTIONSKIDDERCHAINSAW SKIDDER EXTRACTIONCABLE YARDERCHAINSAW SITE B – HS_SK SITE C – HS_CR 230 the results are referred) is 1 m3 of roundwood at the roadside. Concerning the system boundary, the analysis considers all the operations carried out in the forestry (felling, bunching and extraction) and all the related inputs (diesel fuel, lubricating oil, capital goods such as chainsaw, tractors, skidder, cable yarder) and related emissions into the environment. Emissions depend mainly on exhaust gases due to the combustion of fossil fuels into internal combustion engines. The inventory data concerning the flow of materials and energy along the different logging operations and between the analysed system and the environment were collected in three different test sites located in Calabria. For each logging operation, the collected data are: - working times, - productivity, - wood yield, - fuels and lubricant consumption. Table 1 and Table 2 report the inventory data measured during the trials in the three sites. Secondary data concerning the production of diesel, petrol-two stroke, lubricant as well as the manufacturing and disposal of machines (tractor, skidder, cable crane, chainsaw) and the emissions related to the combustion of the different fuels in the internal combustion engines were retrieved from the Ecoinvent database (Ecoinvent, 2012). Table 1: Productivity recorded for the different logging operations Parameter Felling Bunching Extraction Site A HS_TR Site B HS_SK Site C HS_CR Site A HS_TR Site B HS_SK Site C HS_CR Site A HS_TR Site B HS_SK Site C HS_CR Productivity (m3/day) 72 88 62.3 112.8 172.8 - 124.8 204.0 55.2 Workers (number) 2 2 2 3 3 - 3 3 3 Table 2: Main inventory data for the different logging operations Parameter Felling Bunching Extraction Site A HS_TR Site B HS_SK Site C HS_CR Site A HS_TR Site B HS_SK Site C HS_CR Site A HS_TR Site B HS_SK Site C HS_CR Machine Chainsaw Chainsaw Chainsaw Tractor with winch Skidder with winch - Tractor with winch Skidder with winch Cable crane Power (kW) 4.8 4.8 4.8 75 110 - 75 110 85 Mass (kg) 7.1 7.1 7.1 4160 12160 - 4160 12160 6185 Life span (year) 3 3 3 15 15 - 15 15 15 Economic lifespan 3000 3000 3000 12000 10000 - 12000 10000 10000 Annual use (h) 1440 1440 1440 1600 1280 - 1600 1280 1080 Diesel fuel consumption (kg/h) - - - 12.6 18.7 - 14.3 21.3 16.2 Petrol blend consumption (kg/h) 1.0 1.2 0.8 - - - - - - During the 3rd step the environmental impacts are selected and, after classification and characterisation, the inventory data are converted in few numeric indexes. Each index represents an environmental impact (or effect) also called impact category. In this study, the Recipe (Goedkoop et al., 2008) characterisation methods was used and the following impact categories were evaluated: climate change (CC), ozone depletion (OD), particulate matter formation (PM), terrestrial acidification (TA), freshwater eutrophication (FE), marine eutrophication (ME), mineral depletion (MD) and fossil depletion (FD). 231 3. Results and discussion Table 3 shows the comparison among the three different harvesting systems. More in details, the absolute values for the three harvesting systems and the impact variation respect to HS-TR (the harvesting system in which the extraction is carried out with tractor) are reported. For impact categories such as marine eutrophication the variation among the logging systems is limited, while for others (e.g., metal depletion) the differences are wider. Table 3: Environmental impact assessment: Absolute values and comparison. Impact category Unit HS-TR (Site A) HS-SK (Site B) HS-CR (Site C) Value Value ∆ Value ∆ Climate change kg CO2 eq 8.57 8.04 -6% 10.46 22% Ozone depletion mg CFC-11 eq 1.42 1.27 -11% 1.66 17% Terrestrial acidification kg SO2 eq 0.026 0.025 -3% 0.032 26% Freshwater eutrophication g P eq 0.352 0.496 41% 0.563 60% Marine eutrophication kg N eq 0.0044 0.0047 8% 0.0047 8% Particulate matter formation kg PM10 eq 0.011 0.011 1% 0.015 31% Metal depletion kg Fe eq 0.207 0.439 112% 0.499 141% Fossil depletion kg oil eq 2.662 2.440 -8% 3.174 19% The harvesting system carried out in the Site C (HS-CR) and characterised by extraction with cable crane shows the highest environmental impact for all the evaluated impact categories except for ME, where the higher impact is related to harvesting system 2 characterised by the skidder use. This latter shows the best performance for CC, OD, TE and FD with an impact reduction respect to harvesting system 1 ranging from - 3% to -11%. Figure 2: Comparison among the different harvesting systems (for the different impact categories the unit of measure of the score are reported in the X- axe. Among felling, bunching and extraction, this latter represents the logging operation responsible for the highest proportion of the impact, except for ME where the most impacting operation is felling. For HS_CR, the higher impact arises mainly from the extraction carried out by means of cable crane; this operation involves an impact higher than the sum of bunching and extraction in the other two harvesting systems. Although with variable relevance for the different operations, the main environmental hotspots are: 0 2 4 6 8 10 12 14 16 H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR H S_ TR H S_ SK H S_ CR kg CO2 eq mg CFC-11 eq kg SO2 eq x 100 g P eq x 10 g N eq g PM10 eq kg Fe eq x 10 kg oil eq Climate change Ozone depletion Terrestrial acidification Freshwater eutroph. Marine eutroph. Particulate matter form. Metal depletion Fossil depletion Sc or e Felling Bunching Extraction 232 - Fuel consumption, above all for OD and FD (>95% of the total impact) but also for PM, TA and TE (from 25-30% of the total impact), - Lubricant consumption is relevant for felling (e.g., from 33% to 52% for CC, PM, TA and TE) when vegetable oil is consumed, while is negligible (<1% in all the evaluated impact categories) in bunching and extraction where fossil lubricant is consumed, - Machinery manufacturing, maintenance and disposal for mineral depletion (MD) impact category, - The emissions related to fuel combustion in the engine of chainsaw, tractor, skidder and cable yarder show a different role between felling, where petrol and vegetable oil are used, and bunching and extraction, in which there is the consumption of diesel and fossil lubricant. For felling, these emissions are relevant for FE and CC (about 40%). For the operation carried out by machines equipped with a diesel engine, combustion emissions are the main hotspot for CC, TE and ME (about 75-85%). Figure 3 shows the environmental hotspots for the extraction operation carried out in HS-CR with cable crane; for this logging operation, the production of cable for forestry operation (substituted every 2 years) is responsible for 53% of Metal Depletion and 30% of Freshwater Eutrophication (due to mine operations). Nevertheless, considering the three whole logging systems (HS_TR; HS_SK; HS_CR) cable production involves a negligible environmental impact for all evaluated impact categories. Figure 3: Environmental hotspots for the extraction with cable crane. 4. Conclusions This study evaluated, using the LCA approach, the environmental impact of three different logging systems (or harvesting systems) for wood extraction in Southern Italy (Calabria Region). The compared harvesting systems were monitored over an area of about 35 ha and primary data were collected. The cable logging system, typically carried out on steep slopes and other rough terrain, shows the highest environmental impact, while the use of tractor and skidder achieve better environmental performances. Nevertheless, despite its higher environmental impact, cable extraction is a desirable alternative on sensitive sites with high slope where tractors and skidder cannot be used. In conclusion, this results bring a new and important perspective to classic agricultural and forestry engineering and allows placing forest operations within a wider context. Acknowledgment This study is a part of the project Project “ALForLab” (PON03PE_00024_1) co-funded by the National Operational Programme for Research and Competitiveness (PON R&C) 2007-2013, through the European Regional Development Fund (ERDF) and national resource (Revolving Fund -Cohesion Action Plan (CAP) MIUR). 0 20 40 60 80 100 Climate change Ozone depletion Terrestrial acidification Freshwater eutrop. Marine eutrop. Particulate matter form. Metal depletion Fossil depletion % Combustion emissions Diesel prod. Mobile cable yarder prod. Lubricating oil prod. Cable for forestry oper. prod. 233 Reference Caserini, S., Livio, S., Giugliano, M., Grosso, M., Rigamonti, L., 2010, LCA of domestic and centralized biomass combustion: The case of Lombardy (Italy). Biomass Bioenerg; 34: 474–82. Colantoni, A., Evic, N., Lord, R., Retschitzegger, S., Proto, A.R., Gallucci, F., Monarca, D., 2016. Characterization of biochars produced from pyrolysis of pelletized agricultural residues. Renewable and Sustainable Energy Reviews, 64, 187–194, DOI: 10.1016/j.rser.2016.06.003 Ecoinvent, 2012, Ecoinvent. Ecoinvent database v3. Zurich and Lausanne, Switzerland. European Commission, 2014, COM/2014/015 final, A policy framework for climate and energy in the period from 2020 to 2030, 1-18. Facciotto, G., Minotta, G., Paris, P., Pelleri, F., 2014, Tree farming, agroforestry and the new green revolution. A necessary alliance. In: Proceedings of the second international congress of silviculture, Florence, Italy, November 26 th - 29th 2014 pp. 7. Goedkoop, M.J., Heijungs, R., Huijbregts, M., De Schryver, A., Struijs, J., Van Zelm, R. 2009, ReCiPe 2008, A life cycle impact assessment method which comprises harmonised category indicators at the midpoint and the endpoint level, first ed. Report I: Characterisation. Gonzalez-Garcia, S., Berg, S., Moreira, M. T., Feijoo, G. 2009, Evaluation of forest operations in Spanish eucalypt plantations under a life cycle assessment perspective. Scandinavian Journal of Forest Research, 24(2), 160-172. Han, H. S., Lee, H. W., & Johnson, L. R., 2004, Economic feasibility of an integrated harvesting system for small-diameter trees in southwest Idaho. Forest Products Journal, 54(2), 21. ISO, 2006a, ISO 14040. Environmental management - Life cycle assessment - Principles and framework. International Organization for Standardization, Geneva. ISO, 2006b, ISO 14044. Environmental management - Life cycle assessment - Requirements and guidelines. International Organization for Standardization, Geneva. Macrì, G., Zimbalatti, G., Russo, D., & Proto, A.R., 2016, Measuring the mobility parameters of tree-length forwarding systems using GPS technology in the Italian Apennines. Agronomy Research, 14 (3), 836-845. Moneti, M., Delfanti, L. M. P., Marucci, A., Bedini, R., Gambella, F., Proto, A. R., Gallucci, F., 2015: Simulations of a plant with a fluidized bed gasifier WGS and PSA. Contemporary Engineering Sciences, 31, 1461-1473; DOI: 10.12988/ces.2015.56191 Negri, M., Fellin, M., Carè, V., Proto, A.R., 2016. Integrated pyro-gasification process of heterogeneous mediterranean wood species. Contemporary Engineering Sciences, 9 (23), 1113-1123; DOI: 10.12988/ces.2016.68140 Pierobon, F., Zanetti, M., Grigolato, S., Sgarbossa, A., Anfodillo, T., Cavalli, R., 2015, Life cycle environmental impact of firewood production – A case study in Italy. Appl Ener 2015; 150: 185–95. Putz, F. E., Sist, P., Fredericksen, T., Dykstra, D., 2008. Reduced-impact logging: challenges and opportunities. Forest ecology and management, 256(7), 1427-1433. Proto, A.R., Macrì, G., Sorgonà, A., Zimbalatti, G., 2016a. Impact of skidding operations on soil physical properties in southern Italy. Contemporary Engineering Sciences, 9 (23), 1095-1104, DOI: 10.12988/ces.2016.68132 Proto, A.R., Skoupy, A., Macrì, G., Zimbalatti, G., 2016b, Time consumption and productivity of a medium size mobile tower yarder in downhill and uphill configurations: a case study in Czech Republic. Journal of Agricultural Engineering, 47, (4), 216-221, DOI: 10.4081/jae.2016.551 Proto, A.R., Zimbalatti, G. 2016, Firewood cable extraction in the southern Mediterranean area of Italy, Forest Science and Technology, 12, 16-23, DOI: 10.1080/21580103.2015.1018961 Valente, C., Spinelli, R., & Hillring, B. G, 2011, LCA of environmental and socio-economic impacts related to wood energy production in alpine conditions: Valle di Fiemme (Italy). Journal of Cleaner Production, 19(17), 1931-1938. Zambon, I., Colosimo, F., Monarca, D., Cecchini, M., Gallucci, F., Proto, A.R., Lord, R., Colantoni, A., 2016. An innovative agro-forestry supply chain for residual biomass: physicochemical characterisation of biochar from olive and hazelnut pellets. Energies, 9(7), 526; DOI: 10.3390/en9070526 Zimbalatti, G., Proto, A.R., 2009, Cable logging opportunities for firewood in Calabrian forests. Biosystems Engineering 102(1), 63-68, DOI: 10.1016/j.biosystemseng.2008.10.008 234