[{"id": "cet-10060", "words": "2396", "extension": ".htm", "flesch": "59", "author": "Gabel, Dieter; Krause, Ulrich", "title": "Minimum ignition temperature of hybrid mixtures", "date": "2019", "keywords": "dust; hybrid; ignition; minimum; mit; mixtures; temperature", "summary": "Table 2: Single MIT values dust MIT When two or more combustible substances with different states of aggregation are mixed, hybrid mixture explosions can occur.", "mime": "application/pdf"}, {"id": "cet-10061", "words": "3565", "extension": ".pdf", "flesch": "48", "author": "Pacault, Stephanie; Laird, Bianca; Sigot, Lea; Laubie, Baptiste; Janes, Agnes; Simonnot, Marie-Odile; Dufaud, Olivier", "title": "Self-ignition Behavior of Metal Hyperaccumulator Plants: Influence of Metal Content on their Thermal Stability", "date": "2019", "keywords": "heating; hyperaccumulator; ignition; iron; metal; plants; raw; self; temperature", "summary": "A fraction of sample of raw plants was water-washed several times and dried in order to lower its metal content, which was determined by Inductively Coupled Plasma Mass Spectrometry (ICPMS) after plant mineralization using nitric acid. A slightly lower onset temperature of 220\u00b0C was obtained by thermogravimetric experiments performed on raw plants.", "mime": "application/pdf"}, {"id": "cet-10062", "words": "3268", "extension": ".pdf", "flesch": "44", "author": "Pey, Alexis", "title": "Reviewing the risk acceptance criteria in ATEX", "date": "2019", "keywords": "atmosphere; equipment; ignition; zone", "summary": "Both assumptions are easy to apply while considering those ignition sources caused by equipment: engineering design, material specification, sensors and interlocks, etc. are some measures which can be implemented to prevent that a machine generates ignition sources while in operation, but, after all the experience gathered over the years in relation with explosive hazards, it is nowadays clear, that focussing only in equipment generated ignition sources is not enough to ensure safe processes. In order to well describe the risk acceptance criteria in these operations, the exclusion principle is introduced directly at the same level of ignition source assessment, meaning that not only the way ignition sources are generated will be taken into account, but also, for those which is known that will be present, it must be ensured that when it is so, safety measures are in place to ensure that the presence of an ATEX is sufficiently excluded.", "mime": "application/pdf"}, {"id": "cet-10063", "words": "2973", "extension": ".pdf", "flesch": "57", "author": "Heymes, Frederic; Lauret, Pierre; Hoorelbeke, Pol", "title": "An Experimental Study of Water BLEVE", "date": "2019", "keywords": "bleve; figure; liquid; pressure; steam; temperature; vessel; water", "summary": "The aim of this work was to perform BLEVE tests thanks to a 14L pressure vessel designed on purpose to produce high pressure water BLEVE (85 bar). High speed camera capture of the blast waves Figure 10 represents two key data during the violent phase change: internal pressure and blast pressure (at 70 cm from the rupture disk) were reported on a synchronized time scale.", "mime": "application/pdf"}, {"id": "cet-10064", "words": "2579", "extension": ".pdf", "flesch": "49", "author": "Celinski, Maciej; Borucka, Monika", "title": "Fire hazard posed by sugar alcohols", "date": "2019", "keywords": "alcohols; compounds; parameters; smoke; sucrose; sugar; tti", "summary": "Nonetheless four of tested sugar alcohols show higher average HRR and THR value. Global annual production scale of sugar alcohols i.e. sorbitol, xylitol, mannitol, maltitol and isomalt is 1,6 million metric tons and increases rapidly.", "mime": "application/pdf"}, {"id": "cet-10065", "words": "3504", "extension": ".pdf", "flesch": "42", "author": "Schneider, Johannes; von Ramin, Malte; Stottmeister, Alexander; Stolz, Alexander", "title": "Masonry failure and debris throw characteristics under dynamic blast loads", "date": "2019", "keywords": "debris; fragment; launch; loading; masonry; throw; velocities; velocity", "summary": "Aside from the experimental investigations on masonry structures provided in this study, in past years experiments were conducted at the Fraunhofer Institute for High-Speed Dynamics that provide a more general view on initial debris launch velocities (DLV) based on test slabs covering a rectangular steel box, in which a HE Pentolite charge was initiated (D\u00f6rr et al., 2002). The mechanical response in terms of fragment launch conditions of structural components under comparable energy densities, (lower peak overpressures but longer positive pressure duration), still has not been fully described.", "mime": "application/pdf"}, {"id": "cet-10066", "words": "3175", "extension": ".pdf", "flesch": "44", "author": "Breulet, Herve; Sinaba, Tiecoura", "title": "Explosivity and Flammability of Nanopowders: New Challenges", "date": "2019", "keywords": "aluminum; dust; explosion; ignition; nanopowders; size; temperature; tests; vignes", "summary": "Therefore, the evaluations of the ignitability and explosion violence are essential to minimize the risk of dust explosion. Dust explosion is a phenomenon where a flame is propagating in combustible particles cloud dispersed in the air.", "mime": "application/pdf"}, {"id": "cet-10067", "words": "3849", "extension": ".pdf", "flesch": "42", "author": "Bubbico, Roberto ; Biggi, Paolo; Mazzarotta, Barbara", "title": "Protection Systems for Tanks containing Hazardous Materials Exposed to Fire", "date": "2019", "keywords": "fire; pressure; prv; tank; time; vessel", "summary": "However, given the possibility of delaying, or hopefully avoiding, the catastrophic failure of the tank, attention has also been sometimes devoted to other possible protection/mitigation methods: Townsend et al. (1974) (who focused on a rail tank car) and Droste and Shoen (1988), compared the behaviour of uninsulated and thermally protected propane tanks; Shoen and Droste (1988) investigated the use of water spray systems to mitigate the effect of external fires on LPG tanks; more recently, Shebeko et al. (1996) analyzed the influence of relief valves from a theoretical point of view, while further experimental data have been produced and compared with either simplified (Shebeko et al., 2000) or CFD (Landucci et al., 2009) theoretical models. A Study of the effect of the tank diameter on the thermal stratification in LPG tanks subjected to fire engulfment.", "mime": "application/pdf"}, {"id": "cet-10068", "words": "3796", "extension": ".pdf", "flesch": "45", "author": "Santandrea, Audrey; Vignes, Alexis; Krietsch, Arne; Perrin, Laurent; Laurent, Andre; Dufaud, Olivier", "title": "Some Key Considerations when Evaluating Explosion Severity of Nanopowders", "date": "2019", "keywords": "carbon; dust; explosion; ignition; injection; nanopowders; nozzle; time", "summary": "3.3 Water to fire The influence of water on dust explosions, although often not well developed by current standards, can be important. Zhen G. and Leuckel W., 1997, Effects of ignitors and turbulence on dust explosions, Journal of Loss Prevention in the Process Industries, Volume 10, Issues 5-6, 317-324. b) a) 240", "mime": "application/pdf"}, {"id": "cet-10069", "words": "2973", "extension": ".pdf", "flesch": "52", "author": "Taleb-Berrouane, Mohammed ; Khan, Faisal ; Kamil, Mohammad ", "title": "Dynamic RAMS Analysis Using Advanced Probabilistic Approach", "date": "2019", "keywords": "analysis; component; failure; figure; reliability; system; time", "summary": "Unlike any other probabilistic technique available, PN blocks can easily represent a large variety of component types, whether it\u2019s periodic testing, standby system with failure to start condition, or repaired component. The novelty of the work is to illustrate how PN blocks can represent each component and its behavioural changes in continuous and time-dependent form.", "mime": "application/pdf"}, {"id": "cet-1007", "words": "2963", "extension": ".pdf", "flesch": "50", "author": "Le, Yi; Yang, Zaichang; Qiao, Chong", "title": "Analgesic Activity, Toxicity and Alkaloid Composition Variations of Fermented Aconitum Carmichaeli Debx ", "date": "2017", "keywords": "aconitum; cea; ceyfa; extract; hypaconitine; songorine; yeast", "summary": "2.3 Fermentation The dry pieces of Aconitum root (200g) is marinated in 500 ml distilled water for 30 min, then boiled it for 1 h to obtain 200 ml liquid extracts (pH 7.4) which is poured into two flasks (each 100 ml), where 2 g glucose is added to the liquid extract, respectively. 3. Results and discussion During the periods of fermentation, TLC is used to detect the alkaloids in the liquid extract of Aconitum root for variants.", "mime": "application/pdf"}, {"id": "cet-10070", "words": "5204", "extension": ".pdf", "flesch": "59", "author": "Yang, Hui-Ning; Lin, Yu-Jhen; Liu, Chien-Ho; Chin, Mo-Geng; Wang, Cheng-Chieh; Tsai, Hsiao-Yun; Chen, Jenq-Renn", "title": "Suppression of Flame Propagation in a Long Duct by Segregation with Inert Gases", "date": "2019", "keywords": "duct; flame; gas; ignition; inert; propagation; section; suppression; test", "summary": "The concept of suppressing flame propagation in a long duct was proposed via injecting an inert gas into the duct at multiple locations to act as inert gas sections which segregate the flammable mixture. The current study is limited to a fixed fuel concentration and some fixed lengths of ignition section giving a peak flame propagation speed of about 100 m/s. Certainly, the critical length for successful suppression in an open pipe may varied depending on the type of fuel, fuel concentration, the length of ignition section, and the peak flame propagation speed.", "mime": "application/pdf"}, {"id": "cet-10071", "words": "4899", "extension": ".pdf", "flesch": "52", "author": "Blokland, Peter; Reniers, Genserik", "title": "Measuring (un)safety. A broad understanding and definition of safety, allowing for instant measuring of unsafety", "date": "2019", "keywords": "indicators; level; measuring; objectives; organisations; performance; safety; system; unsafety", "summary": "A model that tries to capture safety cultures in a holistic way is \u201cThe Egg Aggregated Model of safety culture\u201d (TEAM). Therefore, increasingly more organisations are looking for more proactive methods in measuring and achieving safety performance.", "mime": "application/pdf"}, {"id": "cet-10072", "words": "3444", "extension": ".pdf", "flesch": "39", "author": "McLeod, Ronald; De Araujo, Douglas; Meireles, Antonio; Thompson, Timothy", "title": "Developing and implementing a Human Reliability improvement program for a multinational petrochemicals company", "date": "2019", "keywords": "braskem; equipment; improvement; reliability; risk; safety; work", "summary": "The pillars and improvement elements have been integrated into Braskem\u2019s corporate management system, supported by Directives and associated training. Table 1: Improvement elements for each of the HR Pillars Leadership and Culture Fitness and Competence Design of Work Systems Leadership Reporting Culture Deference to expertise Avoiding Complacency Learning and improvement Personal Responsibility Execution Discipline Fatigue Management Training and Competence Motivations and Incentives Supervision Staffing and Workload Team Working Management of Change Pre-job risk assessment Critical Communications Critical Tasks (Process Safety & Routine)", "mime": "application/pdf"}, {"id": "cet-1008", "words": "3034", "extension": ".pdf", "flesch": "47", "author": "Jiang, Mingzhong; Chen, Ting; Zhao, Yan; Wu, Qi; Feng, Bo; Xiong, Shan; Wang, Baijuan", "title": "Effects of High Voltage Pulsed Electric Field on Antioxidant Activity of Tea Polyphenols for Yunnan Pu\u2019er Tea ", "date": "2017", "keywords": "frequency; hpef; model; pu\u2019er; scavenging; tea; tea polyphenols; voltage", "summary": "This paper deals with the extraction of tea polyphenols from tea samples by HPEF, and studies the effect of HPEF on the extraction rate and antioxidant activity of Pu\u2019er tea polyphenols. We can see that through the analysis of the corresponding regression model: HPEF can improve the antioxidant activity of Pu\u2019er tea polyphenols to a certain extent, and 1) When the voltage is 22kV, the tea polyphenols have the best scavenging effect on \u00b7OH; 2) When the frequency is less than 100Hz and the voltage is less than 16kV, tea polyphenols has the greatest scavenging ability for O2\u00b7\u2013; 3)The main factor affecting the scavenging ability on DPPH radical is frequency; when the frequency is about 140Hz, the scavenging ability of tea polyphenols on DPPH radical is the highest; 4)", "mime": "application/pdf"}, {"id": "cet-1009", "words": "2486", "extension": ".pdf", "flesch": "38", "author": "Yin, Xiaoyan; Li, Hongyong", "title": "Analysis on Chemical Composition of Anti-Rhinitis Drugs and Study on Immunopharmacology ", "date": "2017", "keywords": "biminkang; control; effect; figure; group; rats; rhinitis", "summary": "Canonica G., Baiardini I., Canonica G., 2010, Early phase resolution of mucosal eosinophilic inflammation in allergic rhinitis, Respiratory Research, 11(1), 54, DOI: 10.1186/1465-9921-11-54 Ciprandi G., 2008, Allergic rhinitis and its impact on asthma, Italian Journal of Allergy & Clinical Immunology, 18(1), 1-8, DOI: 10.1201/b14160-27 Gelfand E. W., 2004, Inflammatory mediators in allergic rhinitis, Journal of Allergy & Clinical Immunology, 114(5), S135, DOI: 10.1016/j.jaci.2004.08.043 Hansen I., Klimek L., M\u00f6sges R., H\u00f6rmann K., 2004, Mediators of inflammation in the early and the late phase of allergic rhinitis, Current Opinion in Allergy & Clinical Immunology, 4(3), 159, DOI: 10.1097/00130832- 200406000-00004 Liu W., Li D., Chen Y., Sun C., Wang J., Zhou L., 2014, Anti-inflammatory effect of il-37b in children with allergic rhinitis, Mediators of Inflammation, 2014(7), 746846, DOI: 10.1155/2014/746846 Mandhane S. N., Shah J. H., Thennati R., 2011, Allergic rhinitis: an update on disease, present treatments and future prospects, International Immunopharmacology, 11(11), 1646-1662, DOI: 10.1016/j.intimp.2011.07.005 Marple B. F., 2008, Targeting congestion in allergic rhinitis: the importance of intranasal corticosteroids, Allergy & Asthma Proceedings, 29(3), 232, DOI: 10.2500/aap.2008.29.3110 Miyahara S., Miyahara N., Matsubara S., Takeda K., Koya T., Gelfand E. W., 2006, Il-13 is essential to the late-phase response in allergic rhinitis, Journal of Allergy & Clinical Immunology, 118(5), 1110-1116, DOI: 10.1016/j.jaci.2006.06.014 Nabe T., Mizutani N., Shimizu K., Takenaka H., Kohno S., 2014, Development of pollen-induced allergic rhinitis with early and late phase nasal blockage in guinea pigs, Inflammation Research, 47(9), 369-374, DOI: 10.1007/s000110050346 Naclerio R. M., 2010, Pathophysiology of perennial allergic rhinitis, Allergy, 52(s36), 7-13, DOI: 10.1111/j.1398-9995.1997.tb04816.x Ofworkshops M., 2004, Aria in the pharmacy: management of allergic rhinitis symptoms in the pharmacy, allergic rhinitis and its impact on asthma, Allergy, 59(4), 373. References Aziza A., Dermawan A., Dewi V. Y. K., 2017, Effectiveness of allergic rhinitis management related to who guideline on allergic rhinitis and its impact on asthma (aria), 3(4), 538-544, DOI: 10.15850/amj.v3n4.651 1265 Brozmanov\u00e1 M., Calkovsk\u00fd V., Plevkov\u00e1 J., Bartos V., Plank L., Tat\u00e1r M., 2006, Early and late allergic phase related cough response in sensitized guinea pigs with experimental allergic rhinitis, Physiological Research, 55(5), 577.", "mime": "application/pdf"}, {"id": "cet-1010", "words": "3029", "extension": ".pdf", "flesch": "58", "author": "Zhou, Cheng; Luan, Feishi; Fang, Xin; Chen, Haitao", "title": "Design of Cabbage Pulling-out Test Bed and Parameter Optimization Test ", "date": "2017", "keywords": "cabbage; force; harvester; poles; root; screw; screw poles; test", "summary": "The development of cabbage harvester is mature aboard while related research and applications in China are still in its early stage. Europe, the United States, and Japan are the countries where research on cabbage harvester have been developed at the highest level.", "mime": "application/pdf"}, {"id": "cet-1011", "words": "4239", "extension": ".pdf", "flesch": "41", "author": "Su, Guiqiu", "title": "Experimental Study on the Transformation of Biomass and Coal Under Different Atmospheric Conditions ", "date": "2017", "keywords": "biomass; carbon; coal; coke; gasification; gasification reaction; pressure; rate; reaction; reaction rate", "summary": "Due to low ash content and sulphur content, high volatile content and high fixed carbon responsiveness, biomass\u2019s synergistic effect with coal gasification can increase the value of products. Compared the single product of coal gasification, and the mixture of rice straw and coal gasification, the results showed that the mixture in the gasification of carbon conversion, and the gas volume fraction of combustible components were higher than those of single coal gasification, the volume fraction of CO in the gas under the volume fraction of single coal gasification CO.", "mime": "application/pdf"}, {"id": "cet-1012", "words": "2652", "extension": ".pdf", "flesch": "48", "author": "Yang, Ling; Wu, Ting; Zou, Juan; Huang, Yunmao; Babu V, Sarath; Lin, Li", "title": "Research on Infrared Spectrum Food Detection Technology Based on Markov Distance Singular Point Identification Method ", "date": "2017", "keywords": "detection; method; model; neural; pls; set", "summary": "In the paper, three kinds of meat detection models were established by PLS-DA and BP neural network modeling methods. At the same time, three kinds of meat identification models were established by BP neural network modeling method.", "mime": "application/pdf"}, {"id": "cet-1013", "words": "2661", "extension": ".pdf", "flesch": "34", "author": "Luo, Ping; Liu, Yangwu", "title": "Preparation of Nanoparticles of Digoxin Solid Lipid ", "date": "2017", "keywords": "complex; digoxin; lecithin; lipid; method; nanoparticles; release", "summary": "Compared with the diffusion of digoxin solution through the dialysis bag membrane, the release of digoxin solid lipid nanoparticles is significantly slowed down, indicating that solid lipid nanoparticles have a sustained release effect on digoxin, and its 72-hour cumulative release is 48.67%. In order to prove the role of solid lipid nanoparticles in oral absorption and bioavailability, the biodegradable monoglyceride with low toxicity and good biocompatibility is used as lipid materials to prepare nanoparticles of digoxin solid lipid and carry out research on polyethylene glycol aimed at the low utilization of digoxin in this research, in order to provide experimental basis for the development of new preparation system of digoxin.", "mime": "application/pdf"}, {"id": "cet-1014", "words": "2859", "extension": ".pdf", "flesch": "15", "author": "Wei, Rui", "title": "Research on the Effects of Sewage Discharge from Chemical Industry Park on Microbial Community ", "date": "2017", "keywords": "ammonia; area; community; culture; samples; structure; system; water", "summary": "To analyze structure change of microbial communities in a sewage system of a typical coastal industrial park and a drainage area, by comparing structures of microbial communities in the sewage treatment system in the park and the pollutant-holding area by means of molecular biology, higher richness and diversity of bacteria and archaea in sediments in the pollutant-holding area than that of the sewage treatment system in the park are found in this research; according to analysis and findings on different points and different seasonal samples in the pollutant-holding area, microbial community structures at each point in the pollutant-holding area share relatively high similarity. 1. Introduction 1.1 Research significance With a typical coastal industrial park chosen as the research object, intermittent sampling and environmental monitoring are carried out on the sewage treatment system in the park and the sewage discharge area where it is located, meanwhile (Harris et al, 2017), quantitative PCR, clone library, 454 high throughput sequencing and molecular biology methods are adopted for analysis of changes of microbial community structure of the sewage treatment system in the industrial park and of the pollutant-holding area to study response relationship between microbial community structure in the bay area and environmental factors, and to explore the influence which may be caused by terrigenous industrial pollution on the microbial community structure in the pollutant-holding bay area (Henson, 2014).", "mime": "application/pdf"}, {"id": "cet-1015", "words": "2914", "extension": ".pdf", "flesch": "36", "author": "Liu, Yangwu; Luo, Ping", "title": "Study on Mitigative Effects of Exogenous No Donor Sodium Nitroprusside on Corn Nickel Toxicity ", "date": "2017", "keywords": "concentration; corn; corn seeds; germination; nickel; nitroprusside; seeds; sodium", "summary": "Experimental design and results Through test on germination of corn seed with indoor incubation at constant temperature, it\u2019s necessary to firstly determine the germination rate, germination potential, germination index and vitality index of corn seeds at different nickel concentrations, further measure the germination rate, germination potential, germination index and vitality index of corn seeds at different sodium nitroprusside concentrations, and confirm the selection of concentration of nickel sodium nitroprusside. There, study on mitigative effects of exogenous NO on corn nickel toxicity plays an important practical significance in preventing nickel pollution, improving crop yield, ensure crop quality and prevent the harm of nickel (Mansour et al., 2016).", "mime": "application/pdf"}, {"id": "cet-1016", "words": "3553", "extension": ".pdf", "flesch": "44", "author": "Guo, Hongxia; Zhang, Fang; Guo, Xiaoyang; Cheng, Jianfeng; Yang, Tiegang", "title": "Researches on the Salt Tolerance and Restraint Effects of Radix astragali in Saline-Alkali Soils", "date": "2017", "keywords": "alkali; amb; density; plant; planting; saline; salt; soil; table", "summary": "According to soil soluble salt amount in different times (Table 4), highest value appeared in the October and the lowest was in August; which was due to the more precipitation in July and August to make salt leak subsoil with the leakage of water, but precipitation after September decreased and surface evaporation severely increased to make salt to surface soil. The results in Table 4 showed that soil soluble salt amount between CK and four planting densities had significant differences (p<0.05), and those of D1 and D2 had significantly higher than those of D3 and D4, but there was no significant difference between D1 and D2 or D3 and D4.", "mime": "application/pdf"}, {"id": "cet-1017", "words": "2512", "extension": ".pdf", "flesch": "49", "author": "Li, Guiwen; Du, Xianfeng", "title": "The Interaction between EGCG3\u2019\u2019Me in Tea and Alpha-glucosidase ", "date": "2017", "keywords": "binding; egcg3\u201dme; fluorescence; glucosidase; interaction; quenching; tea", "summary": "As shown in Figure 1, when the concentration of \u03b1-glucosidase remained constant, the shape of \u03b1- glucosidase peak did not change despite the increase of EGCG3\u201dMe concentration; meanwhile, the fluorescence intensity of \u03b1-glucosidase decreased significantly, a signal of regular fluorescence quenching. To make up for the gap, this paper takes EGCG3\u201dMe monomer as the inhibitor to analyse the effect of EGCG3\u201dMe on \u03b1- glucosidase by DOI: 10.3303/CET1762219 Please cite this article as: Guiwen Li, Xianfeng Du, 2017, The interaction between egcg3\u2019\u2019me in tea and alpha-glucosidase, Chemical Engineering Transactions, 62, 1309-1314 DOI:10.3303/CET1762219 1309 fluorescence spectrometry, aiming to disclose the interaction mechanism between the two and lay a theoretical basis for the development of \u03b1-glucosidase inhibitors.", "mime": "application/pdf"}, {"id": "cet-1018", "words": "2586", "extension": ".pdf", "flesch": "37", "author": "Xue, Zhiping; Liu, Qingyu; Zhang, Min", "title": "Study on Optimization of Reducing Sugar Yield from Corn Stalk Based on Microwave-Assisted Acid Pretreatment Process ", "date": "2017", "keywords": "acid; corn; microwave; power; reaction; sugar; time; yield", "summary": "Figure 2: Response surface graphs showing the interactive effect of microwave power and pretreatment time 1317 3.3 Ultra Depth Microscope analysis Using ultra depth microscope to observe the corn stalks after the stalks had been pretreated by microwave- assisted acid, and then synthesize 3D ultra depth images at different magnifications, e.g. Figure 3 and 4. a. Figure of Zoom in1000 times b. 3D Figure of Zoom in 3000 times Figure 3: 3D microscope photograph of untreated corn stalk at different magnifications Untreated surface of corn stalks is relatively smooth and flat, there\u2019s not many empty holes on it, and the wax layer is not damaged. By analysis of Figure 1c we can see that, with the increase of microwave reaction time, the yield of reducing sugar gradually increases, and the yield of reducing sugar reaches maximum when the reaction time is 20min.", "mime": "application/pdf"}, {"id": "cet-1019", "words": "2780", "extension": ".pdf", "flesch": "46", "author": "Zhou, Qingsheng; Wang, Yao; Han, Tao; Li, Yali; Zhang, Yichuan", "title": "The Demand & Supply Balance Analysis for Organic Matter of the Agricultural Waste in Yongcheng City ", "date": "2017", "keywords": "agricultural; livestock; quantity; resources; soil; supply; wastes", "summary": "For the OM demands for soil and OM resources quantity for the 6 townships and 23 towns as the objects of study, refer to the calculation results in Figure 1. 1323 Figure 1: OM demands in soils and OM resources in the studies areas (Ten thousand tons/year) (2013) 1324 Figure 1 shows, the OM demands for soil is less than the OM resources quantity in the studied areas, all presenting the supply over demand. Where: Dij: OM resource quantity in livestock excrements (t/year)", "mime": "application/pdf"}, {"id": "cet-10195", "words": "2793", "extension": ".htm", "flesch": "45", "author": "Antonioni, Giacomo ; Moreno, Valeria ", "title": "A procedure for emergency planning for SMEs under Seveso III directive in the ISO 31000 framework", "date": "2019", "keywords": "cycle; directive; emergency; iso; plan; risk", "summary": "Emergency plans have to be accurately prepared, with the cooperation of all involved subjects: both people of the organization where the unexpected event may occur and people not belonging to the organization who can be impacted by the occurrence of the event. There are two kinds of emergency plan: the internal (or on-site) emergency plan and the external (or off-site) emergency plan.", "mime": "application/pdf"}, {"id": "cet-10196", "words": "3389", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-10196", "date": null, "keywords": "assessment; damage; factor; n.a; plant; risk; space; tank", "summary": "Contact with moving mechanical parts CS_1 Tank 9 Industrial water for disposal as non- hazardous waste Reaction between sewage and oxygen possible formation of biogas/ methane 3.2 Results of the analysis and decision making procedure Table 3 shows the results of confined spaces risk assessment for the case study carried on according to the methodology above described. Within the technological risk function, R=PxD, in order to account for the specific features of confined spaces, the probability of occurrence P was defined in two indices: the frequency of exposure to confined spaces, F, and the contact time I (strictly related to the complexity of the intervention that must be performed).", "mime": "application/pdf"}, {"id": "cet-10197", "words": "3164", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-10197", "date": null, "keywords": "equipment; maintenance; maintenance strategy; plant; standard; strategy; value", "summary": "Instead for maintenance strategy 2, only the interval between the next maintenance shows an improvement. Gallimore K.F., Penlesky R.J., 1988, Framework for developing maintenance strategies, Production and Inventory Management Journal, 29(1), 16-22.", "mime": "application/pdf"}, {"id": "cet-10198", "words": "4369", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-10198", "date": null, "keywords": "management; research; safety; safety science; science; system; theory", "summary": "The results show that the global research trends of safety science have undertaken a drastic shift, and safety science research has closely followed the demands of social and economic development. Based on literatures (Wu, 2016; Wu, 2017; Wang et al. 2017; Wang and Wu, 2018), the purposes of this paper are to find out the future trends in safety science research to help safety researchers and practitioners understand the research trends and frontiers in the field of safety science 2.", "mime": "application/pdf"}, {"id": "cet-10199", "words": "3220", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-10199", "date": null, "keywords": "accidents; analysis; data; fdi; risk; safety; scenario; sector; skm", "summary": "Economic and social consequences of occupational accidents affects clearly FDI efficiency and its competitiveness. The information acquired by this research can help analysts to better address the measures to be adopted in a work environment, in order to prevent occupational accidents and give a concrete contribution to Risk Management.", "mime": "application/pdf"}, {"id": "cet-1020", "words": "3875", "extension": ".pdf", "flesch": "61", "author": "Mi, Fei; Xiang, Zhixing", "title": "Heavy Metal Transport Genes and Bioinformatics Analysis of At. Ferrooxidans ", "date": "2017", "keywords": "cu2; culture; dy1; dy3; ferrooxidans; strains", "summary": "Ferrooxidans to heavy metal ions, and compares the tolerance of different strains to Cu2+ and the expression of At. There are differences in the adaptability of different strains to the leaching system.", "mime": "application/pdf"}, {"id": "cet-10200", "words": "3139", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-10200", "date": null, "keywords": "analysis; failure; fuzzy; probability; process; safety", "summary": "5.36E-01 6.40E-03 ESDa M M FH (0.437,0.574,0.705;0.413,0.574,0.735) 6.81E-01 1.64E-02 ESDm FH M M (0.449,0.584,0.712;0.426,0.584,0.742) 6.90E-01 1.73E-02 IIB; Immediate ignition barrier, DIB; Delay ignition barrier, ESDa; Automatic emergency shutdown, ESDm; Manual emergency shutdown 1030 Figure 2: Comparison of failure probability for safety barriers using EFST and CFST A comparison of results regarding occurrence probability of the top event (FPRS), its main contributing factors, including human failures, mechanical failures and process failures, and potential consequences of the accident scenario is shown in Table 3. FH FH FH (0.620,0.730,0.820;0.610,0.730,0.850) 8.11E-01 3.83E-02 BE.4 H M FH (0.605,0.709,0.807;0.585,0.709,0.834)", "mime": "application/pdf"}, {"id": "cet-10201", "words": "3610", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-10201", "date": null, "keywords": "assessment; management; maritime; oil; openrisk; project; questions; risk; sea; toolbox; tools", "summary": "For instance, some of them need risk assessment tools to support short-term tactical planning, whereas others need them for long-term strategic planning. Knowledge-based marine conservation in oil spill risk management.", "mime": "application/pdf"}, {"id": "cet-10202", "words": "3253", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-10202", "date": null, "keywords": "assessment; elements; risk; segment; system; transport", "summary": "As with segment risks for line elements, the absolute risk for area elements is assessed for the whole site (sum of the cell risks) using the same three-band system. References DNV, SGS, 2014, Risk analysis system for the transport of hazardous substances : inventorisation, validation of assumptions and parameters and guidance for applying the risk analysis system, Brussel: Vlaamse overheid, Departement Leefmilieu, Natuur en Energie DNV GL, SGS, 2018, External safety risk assessment system for transport of dangerous goods \u2014final report, Brussel: Vlaamse overheid, Departement Leefmilieu, Natuur en Energie 1044", "mime": "application/pdf"}, {"id": "cet-10203", "words": "5272", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-10203", "date": null, "keywords": "bar; ddt; detonation; mixture; pipe; pressure; test", "summary": "Thereafter an opening (\u03c6i = 4 mm) in the blind flange at the end of the test pipe was opened to the off gas such that the combustible mixture from the vessel pushed out the nitrogen in test pipe by plug flow. 50,18 24 35 114.3x3.6 878536 107,1 9600 3,17 130,00 30,00 3,226 3,226 29,032 67,742 376,00 2303 1952 16,20 51,35 1,84 221,00 229,21 194,83 5,42 no transition to detonation no transition to detonation, mixture too rich Experiments in short pipes, format 114.3 x 3.6, at 130 \u00b0C no transition to detonation no transition to detonation no transition to detonation Experiments in long pipes (exception is test 19, here reflection at pipe end is scenario 7, but DDT is scenario 1), format 48.3 x 2.6, tests at 70 \u00b0C and 80 \u00b0C Experiments in long pipes (exceptions are tests 5 and 22: reflections at pipe ends are scenario 7; for test 22 the DDT is scenario 5, for test 5 the DDT is scenario 1), format 48.3 x 2.6, most tests at 130 \u00b0C Data of pipe Data of C6H12/O2/N2 gas mixture Diameter increase at location of DDT B C Y Z AA AB AC AD AE AF AG AH AI AJ AK AL AM 1 Data of pipe pipe history 2 num- ber of test pipe dimension: outer diameter [mm] x wall thickness", "mime": "application/pdf"}, {"id": "cet-10205", "words": "4029", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-10205", "date": null, "keywords": "bar; idt; temperature", "summary": "If the thin slice of unreacted mixture still DOI: 10.3303/CET1977177 Paper Received: 1 January 2019; Revised: 3 May 2019; Accepted: 3 July 2019 Please cite this article as: Schildberg H.-P., Eble J., 2019, Experimental Determination of the Static Equivalent Pressures of Detonative Explosions of Cyclohexane/O2/N2-Mixtures in Long and Short Pipes (part 3 of 3), Chemical Engineering Transactions, 77, 1057-1062 DOI:10.3303/CET1977177 1057 remaining ahead of the front would need longer than about 10 \u00b5s to autoignite \u2013 and thereby generating the DDT \u2013 it would be consumed in the next 10 \u00b5s in deflagrative manner and the DDT would not occur. Understanding the observed precompression factors by applying reaction kinetics The precompression factors, which are attained in the precompressed zone of unreacted mixture ahead of the deflagrative flame front at the instant of autoignition, should correlate with the values found experimentally for the ratio R. To understand quantitatively the reason why (1) the R-values of stoichiometric C6H12/O2/N2 mixtures with low O2 concentrations differ from the R-values found for the other three stoichiometric mixtures CH4/O2/N2, H2/O2/N2 and C2H4/O2/N2 at corresponding O2-concentrations and why (2) the R-values drop along the stoichiometric line with rising O2 concentrations, reaction kinetics will be applied.", "mime": "application/pdf"}, {"id": "cet-1021", "words": "3488", "extension": ".pdf", "flesch": "39", "author": "Wang, Shuaijie; Gao, Xueqin; Liu, Ying; Qin, Lu; Guan, Yao", "title": "Anoxic Bioremediation of Oil Contaminated Coastal Sediment ", "date": "2017", "keywords": "adsorption; biodegradation; degradation; diesel; electron; nitrate; oil; sediment", "summary": "Figure 2: Effect of nutrients on the anoxic degradation of No.0 diesel oil in coastal sediment 3.3 Effect of electron acceptors on diesel oil degradation Two kinds of electron acceptors, sulfate ion and nitrate ion, were added respectively to investigate their influence on the anoxic biodegradation of No. 0 diesel oil in Bohai coastal sediment and the results were shown in Figure 3. Figure 3: Effects of electron acceptors on the anoxic degradation of No. 0 diesel oil in coastal sediment 0 20 40 60 80 100 120 0 10 20 30 40 50 60 70 IB IB+N O il re m ov al r at io (% ) time(d) 0 20 40 60 80 100 120 0 10 20 30 40 50 60 70 80 IB+EAS IB IB+EAN O il re m ov al r at io (% ) time(d) 1336 3.4 Effect of oil-degradaing strains on diesel oil degradation Three oil-degrading strains named B1, B2 and B3 were domesticated and isolated from the coastal sediment.", "mime": "application/pdf"}, {"id": "cet-1022", "words": "2777", "extension": ".pdf", "flesch": "42", "author": "Zhang, Lihui", "title": "Bio-geochemical Circulation of Nitrogen in Lakes and the Role of Microorganisms ", "date": "2017", "keywords": "adsorption; bacteria; nh4; nitrogen; sediments; treatment; water", "summary": "Surrounded by residential area, the Shahe Gate is closed during sampling with a high percentage of total nitrogen in ammonia nitrogen while the Yangwa Gate, high in nitrate nitrogen due to impact of the Liangshui River in upstream, is surrounded by agricultural area and frequent in gate control. During preliminary stage of cultivation, Treatment 4 was the highest in nitrogen amount, then came Treatment 5, while Treatment 1, 2, 3 were the lowest.", "mime": "application/pdf"}, {"id": "cet-1023", "words": "2861", "extension": ".pdf", "flesch": "52", "author": "Zhao, Jingjing; Li, Wei; Bai, Chongliang", "title": "Risk Evaluation for Fire and Explosion Accidents in the Storage Tank Farm of the Refinery ", "date": "2017", "keywords": "explosion; factor; fire; lpg; process; safety; tank", "summary": "P :Fire and explosion of LPG spherical tank, F1: Tank explosion due to overpressure, F2: Furthermore, ATA is used to analyze the fire and explosion accidents of LPG spherical tank, obtain minimal cut set (MCS) that affect the top event, calculate and sort the structural important degree of basic event, confirm the primary factors which affect the accident of the LPG spherical tank, and put forward appropriate prevention measures, thus improving the safety and operation reliability of LPG spherical tank.", "mime": "application/pdf"}, {"id": "cet-1024", "words": "2557", "extension": ".pdf", "flesch": "55", "author": "Wang, Xiaolei", "title": "Research on the Location of the Hazardous Chemical Distribution Center under the Supply Chain Environment ", "date": "2017", "keywords": "center; chain; chemical; distribution; supply; w w", "summary": "When we consider the safety problem of the location of hazardous chemical distribution center, we should consider other supply chain problems, such as costs and transportation etc. The experimental results show that the evaluation system of this paper has a good effect on the distribution center location of hazardous chemical under the supply chain environment.", "mime": "application/pdf"}, {"id": "cet-1025", "words": "2933", "extension": ".pdf", "flesch": "49", "author": "Zhang, Minhui; Yang, Jian", "title": "Research on the Prediction of Hazardous Chemicals Accidents Based on Improved Grey Model ", "date": "2017", "keywords": "accidents; chemicals; grey; model; prediction", "summary": "The possibility of hazardous chemicals accidents is increasing. The study of reducing hazardous chemicals accidents is an important research field of safety production in china.", "mime": "application/pdf"}, {"id": "cet-1026", "words": "3173", "extension": ".pdf", "flesch": "57", "author": "Li, Leilei; Yang, Zhifeng", "title": "Emergency Response Analysis of Fatal Gas Explosions Based on a Case Study ", "date": "2017", "keywords": "air; coal; emergency; explosion; gas; rescue; rescue team; team", "summary": "Li J., Guo D., Di X., 2012, Study on method of coal mine gas accident emergency decision making, Safety in Coal Mines, 43(12), 225-228. SAWS, SACMS, 2016, Coal Mine Safety Regulation, China Coal Industry Publishing House, Beijing, China. Quite a few scholars have studied the emergency rescue in gas explosion accidents (Zaidi et al., 2017).", "mime": "application/pdf"}, {"id": "cet-1027", "words": "3139", "extension": ".pdf", "flesch": "48", "author": "Wang, Lele", "title": "Research on Emergency Management Capability Evaluation of Hazardous Chemical Supply Chain ", "date": "2017", "keywords": "accident; chain; chemical; emergency; fitness; management; supply", "summary": "Therefore, taking appropriate measures against hazardous chemical emergencies can prevent the deterioration of the situation in time. Emergency management of hazardous chemical emergency must be timely and effective.", "mime": "application/pdf"}, {"id": "cet-1028", "words": "3103", "extension": ".pdf", "flesch": "56", "author": "Zheng, Duan", "title": "Research on Hazardous Chemical Road Transportation Route Optimization Based on the New Ant Colony Algorithm ", "date": "2017", "keywords": "algorithm; ant; chemical; colony; risk; road; time; transportation", "summary": "The research background of transportation and hazardous chemical road transportation are introduced. 2. Accident characteristics of hazardous chemical road transportation", "mime": "application/pdf"}, {"id": "cet-1029", "words": "3028", "extension": ".pdf", "flesch": "59", "author": "Zhang, Xuqi", "title": "Research on Risk Early Warning of the Chemical Supply Chain Based on Improved PSO Algorithm ", "date": "2017", "keywords": "chain; chemical; chemical supply; risk; supply; supply chain; warning", "summary": "Chemical risk early warning indicator system can reflect all kinds of risks while reflecting the real situation of supply chain risk accurately and sensitively. Figure 4: The result of the output value and the expectations It can be seen from figure 3 that the prediction accuracy of supply chain risk is more than 90% by using the improved PSO algorithm.", "mime": "application/pdf"}, {"id": "cet-1030", "words": "3233", "extension": ".pdf", "flesch": "50", "author": "Song, Ying", "title": "Transformation and Upgrading of Chemical Enterprise under the Environment of Internet and Big Data ", "date": "2017", "keywords": "interval; p z; transformation; z q; z z", "summary": "= ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ){ , ,MIL NIL MIL NIL MIU NIU MIU NIUp z + p z p z p z p z p z p z p z\u2212 \u00d7 + \u2212 \u00d7\uf0e9 \uf0f9\uf0eb \uf0fb ( ) ( ) ( ) ( ) },MIL NIL MIU NIUq z q z q z q z\u00d7 \u00d7\uf0e9 \uf0f9\uf0eb \uf0fb (4) M N\u2297 = ( ) ( ) ( ) ( ){ , ,MIL NIL MIU NIUp z p z p z p z\u00d7 \u00d7\uf0e9 \uf0f9\uf0eb \uf0fb ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) },MIL NIL MIL NIL MIU NIU MIU NIUq z +q z q z q z q z q z q z q z\u2212 \u00d7 + \u2212 \u00d7\uf0e9 \uf0f9\uf0eb \uf0fb ; (5) ( ) ( ){ ( ) ( ) }1- (1- ) ,1- (1- ) , ( ) , ( )MIL MIU MIL MIUM p z p z q z q z\u03bb \u03bb \u03bb \u03bb\u03bb \uf0e9 \uf0f9 \uf0e9 \uf0f9= \uf0eb \uf0fb \uf0eb \uf0fb ; (6) ( ) ( ){ ( ) ( ) }( ) , ( ) , 1- (1- ) ,1 (1- )MIL MIU MIL MIUM p z p z q z q z\u03bb \u03bb In particular, when W = (1/N, 1/N, ..., 1/N)T , the above operator could reduce to 1 2 1 ( , ,..., ) numN N i j j IVIFA Z Z Z W Z = = \uf0e5 ( )( ) ( )( ) ( )( ) ( )( )1/ 1/ 1/ 1/ 1 1 1 1 1 1 ,1 1 , , Nnum Nnum Nnum NnumN N N N IL j IU j IL j IU j j j j j p Z p Z q Z q Z = = = = \uf0e6 \uf0f6\uf0e9 \uf0f9 \uf0e9", "mime": "application/pdf"}, {"id": "cet-1031", "words": "3116", "extension": ".pdf", "flesch": "53", "author": "Jiang, Weixiang", "title": "Optimization of Refinery Production Scheduling Based on Ant Colony Algorithm ", "date": "2017", "keywords": "algorithm; ant; colony; oil; optimization; process; production; refinery; scheduling", "summary": "Figure 4: The comparison of product oil production At the same time, we compare the relationship between the amount of oil and energy consumption during the production cycle of one month. According to the production aim, the devices of oil refining production are classified into the following categories: crude oil separation device, heavy oil becoming lighter device, oil upgrading and oil refining equipment, oil blending device, gas processing plant, atmosphere chemical device, production equipment and product analysis centre.", "mime": "application/pdf"}, {"id": "cet-1032", "words": "3304", "extension": ".pdf", "flesch": "38", "author": "Ma, Shuqi; Lyu, Shuran; Zhan, Qiujie", "title": "Research on the Explosive Characteristics of Oil and Gas Mixture in Urban Drainage Pipeline ", "date": "2017", "keywords": "explosion; explosion pressure; gas; gasoline; pressure; rate; rising; water", "summary": "Moreover, we give discussions on explosive characteristics of the mixed gases with different contents of gasoline, effect of water on explosion suppression of oil and gas mixture, and influence of methane with different concentrations on the explosive characteristics of oil and gas mixture from the two aspects of explosion pressure and explosion pressure rate of the mixed gas. Researches of the domestic and overseas scholars on the gas explosion in drainage duct mainly concentrate on the monitoring of toxic and hazardous gases in underground drainage duct of cities and the risk assessment on gas explosion (Benhorma et al., 2017; Caruso and Nobili, 2017; Sakhrieh et al., 2017; Yang et al., 2016; Zaidi et al., 2017).", "mime": "application/pdf"}, {"id": "cet-1033", "words": "2733", "extension": ".pdf", "flesch": "42", "author": "Li, Huiqin; Zhang, Yanjun", "title": "Research on Storage Management of Hazardous Chemicals based on Internet of Things ", "date": "2017", "keywords": "chemicals; information; management; rfid; storage; system; technology", "summary": "Figure 5: Framework of hazardous chemicals delivery management system based on RFID RFID based on delivery process of hazardous chemicals storage management system can avoid manual writing and reduce the error rate. Figure 2: Framework of hazardous chemicals storage management system based on RFID 4.1 Warehousing operation Warehousing operation process is as follows.", "mime": "application/pdf"}, {"id": "cet-1034", "words": "2211", "extension": ".pdf", "flesch": "48", "author": "Zhao, Yihan", "title": "Analysis of Pollution Control on the Construction of Garden Green Space in Petrochemical Enterprises ", "date": "2017", "keywords": "construction; control; green; petrochemical; plant; pollution; space; water", "summary": "In the construction of urban green space system, the selection and arrangement of green plants is very important, which is directly related to the ecological function of green space system and the value of landscape aesthetics. 1415 Reference Bergkamp G., 1995, A hierarchical approach for desertification assessment, Environmental Monitoring & Assessment, 37(1-3), 59-78, DOI: 10.1007/BF00546880 Cong G., Gao J., Wang G., 2012, Design of intelligent maintenance decision-making system for fixed equipment in petrochemical plants, International Conference on Web Information System & Minging, 7529 :402-413, DOI: 10.1007/978-3-642-33469-6_52 Klijn F., Haes H.A.U.D., 1994, A hierarchical approach to ecosystems and its implications for ecological land classification, Landscape Ecology, 9(2), 89-104, DOI: 10.1007/bf00124376 Kylafis G., Loreau M., 2011, Niche construction in the light of niche theory.", "mime": "application/pdf"}, {"id": "cet-1035", "words": "2519", "extension": ".pdf", "flesch": "48", "author": "Cui, Yezhu; Xie, Yongjin", "title": "Research on the Optimization of Logistics Simulation to the Container Yard Gate System of Hazardous Chemicals Port ", "date": "2017", "keywords": "chemicals; gate; handling; port; system; transport; yard", "summary": "DOI: 10.3303/CET1762237 Please cite this article as: Yezhu Cui, Yongjin Xie, 2017, Research on the optimization of logistics simulation to the container yard gate system of hazardous chemicals port, Chemical Engineering Transactions, 62, 1417-1422 DOI:10.3303/CET1762237 1417 As for hazardous chemicals, the following precaution measures must be taken: (1) Prevent the polymerization and explosion of gas. 3.2 Instance analysis To verify the validity of the method in this paper, gate service system of hazardous chemicals yard of a large port is researched.", "mime": "application/pdf"}, {"id": "cet-1036", "words": "2344", "extension": ".pdf", "flesch": "40", "author": "Yuan, Lianxia; Yang, Shizhu", "title": "Research on the Cost Management and Forecast for the Projects of Petrochemical Enterprises ", "date": "2017", "keywords": "cost; degree; factors; influence; management; petrochemical; projects", "summary": "Anderson S.W., 2006, Managing costs and cost structure throughout the value chain: research on strategic cost management, Handbooks of Management Accounting Research, 2(6), 481-506, DOI: 10.1016/s1751- 3243(06)02001-3 Anderson S.W., Dekker H.C., 2009, Strategic cost management in supply chains, part 1: structural cost management, Social Science Electronic Publishing, 23(2), 201-220, DOI: 10.2308/acch.2009.23.2.201 Anderson S.W., Dekker H.C., 2009, Strategic cost management in supply chains, part 2: executional cost management, Accounting Horizons, 23(3), 289-305, DOI: 10.2308/acch.2009.23.3.289 Dubois A., 2003, Strategic cost management across boundaries of firms, Industrial Marketing Management, 32(5), 365-374, DOI: 10.1016/s0019-8501(03)00010-5 He Y., 2004, Summary of the research on strategic cost management, Journal of Beijing Technology & Business University, 81(7), 64-70. Jefferson M., 2006, Sustainable energy development: performance and prospects, Renewable Energy, 31(5), 571-582, DOI: 10.1016/j.renene.2005.09.002 Lii A.L., 2003, A constraint\u2010based framework for strategic cost management, Industrial Management & Data Systems, 103(8), 591-599, DOI: 10.1108/02635570310497639 Maiga A.S., 2015, Information systems integration and firm profitability: mediating effect of cost management strategy, Advances in Management Accounting, 25, 149-179, DOI: 10.1108/s1474-787120150000025004 Markovska N., Taseska V., Pop-Jordanov J., 2009, Swot analyses of the national energy sector for sustainable energy development, Energy, 34(6), 752-756, DOI: 10.1016/j.energy.2009.02.006 McNair C.J., Polutnik L., Silvi R., 2001, Cost management and value creation: the missing link, European Accounting Review, 10(1), 33-50, DOI: 10.1080/0963810020025321 Ren X.H., Zhang Y.M., 2015, The optimal size of China\u2019s strategic petroleum reserve, Mathematical Modelling of Engineering Problems, 2(3), 13-16, DOI: 10.18280/mmep.020304 Sendilvelan S., Sundarraj C., 2016, Performance and emission study on a dual fuel engine with modified gas inlet, International Journal of Heat and Technology, 34(3), 545-550, DOI: 10.18280/ijht.340328 Shank J.K., Govindarajan V., 1992, Strategic cost management: the value chain perspective, Journal of Management Accounting Research, 4, 179-197.", "mime": "application/pdf"}, {"id": "cet-1037", "words": "3301", "extension": ".pdf", "flesch": "52", "author": "Li, Yali; Liu, Bin", "title": "Effect of Ordering Strategy of Chemical Enterprises on Supply Chain Stability ", "date": "2017", "keywords": "bullwhip; chain; effect; supply; t t; \uf02d \uf02d", "summary": "From the perspective of lead time, this paper analyses the influence of forecasting methods on supply chain bullwhip effect and supply chain stability. From the perspective of lead time, this paper analyses the influence of forecasting methods on supply chain bullwhip effect and supply chain stability.", "mime": "application/pdf"}, {"id": "cet-1038", "words": "2852", "extension": ".pdf", "flesch": "60", "author": "Liang, Qian; He, Yujie", "title": "The Risk Assessment System of Chemical Industry Park based on Analytic Hierarchy Process ", "date": "2017", "keywords": "judgment; matrix; p p; risk; \uf0e7 \uf0f7; \uf0f7 \uf0e7", "summary": "There are many risk control methods, such as AHP, fault tree method and risk index method. In the analytic hierarchy process, the construction of judgment matrix is the key in the whole analysis process, which determines the success or failure of the analysis process.", "mime": "application/pdf"}, {"id": "cet-1039", "words": "3401", "extension": ".pdf", "flesch": "54", "author": "He, Shouhui; Li, Xiaodong; Wang, Yan; Liu, Hongda", "title": "Assessment of Enterprise Value in Chemical Industry by Using Fuzzy Decision Making Method ", "date": "2017", "keywords": "chemical; decision; enterprise; len; similarity; value", "summary": "It is worth to note that in chemical industry, enterprise value is different to other general enterprises. Enterprise value denotes the value that an enterprise can create, which has been widely applied venture investment, financing, enterprise annexation and so on (Krishna, 2016; Xu, 2014).", "mime": "application/pdf"}, {"id": "cet-1040", "words": "3158", "extension": ".pdf", "flesch": "61", "author": "Liu, Haibo; Liu, Zhenfang; Li, Aining", "title": "Research on Location Algorithm of Dangerous Gas Source in Chemical Industry Park based on ZigBee ", "date": "2017", "keywords": "algorithm; gas; location; source; \uf02d \uf02d", "summary": "Gas source location is a method to predict the location of gas leak points by combining gas concentration detection and gas diffusion models, can help us to warn of the leakage of dangerous gas. Thirdly, aiming at the problem of large computational complexity of traditional model, an improved particle swarm algorithm for gas source location is proposed by combining force-directed algorithm.", "mime": "application/pdf"}, {"id": "cet-1041", "words": "3209", "extension": ".pdf", "flesch": "50", "author": "Xue, Huijun", "title": "Prediction of Chemical Oxygen Demand Emissions in Wastewater Treatment Plant Based on Improved Artificial Neural Network Model ", "date": "2017", "keywords": "model; network; neural; sewage; treatment; water", "summary": "Figure 3: Training error curve of improved BP neural network Figure 4: Regression result of neural network As can be seen from Figure 3, using 8 measurable sewage indexes as inputs of BP neural network, and COD as output, a soft sensing model of sewage treatment is established. Bao and Xu (2011) have the established stepwise regression analysis model, ARMA model, neural network model based on time series analysis and neural network model based on regression analysis.", "mime": "application/pdf"}, {"id": "cet-1042", "words": "3189", "extension": ".pdf", "flesch": "52", "author": "Chen, Yehua; Yue, Xiaoyun; Bai, Jing; Liu, Yijian", "title": "Risk Analysis of Chemical Industry Based on Group Consensus Decision Making Method ", "date": "2017", "keywords": "assessment; chemical; decision; group; l(good; method; risk", "summary": "Meanwhile, although the existing studies have been focused on risk management of chemical industry, there are still some problems such as a rational method to assess chemical risk. Although the existing studies have been focused on risk management of chemical industry, there are still some problems such as a rational method to assess chemical risk (Zhou, 2016).", "mime": "application/pdf"}, {"id": "cet-1043", "words": "2805", "extension": ".pdf", "flesch": "43", "author": "Gu, Yong", "title": "Study on the Life-Cycle Engineering Cost Management of Large Chemical Projects ", "date": "2017", "keywords": "chemical; costs; cycle; engineering; lcc; life; management; phase; projects; scale", "summary": "Jiang X.L., 2002, The role of project cost management in local economic and social development, Human Molecular Genetics, 11(26), 3345-3350. Kohl B., Wulke R. J., 2004, Supplementing accounting systems for project cost management, Aace International Transactions, IT31. 1469 Lenior T.M.J., Verhoeven J.H.M., 1990, Implementation of human factors in the management of large-scale industrial investment projects: a management point of view and ergonomics practice, Ergonomics, 33(5), 643-653, DOI: 10.1080/00140139008927175 Liang, 2014, The application of modem cost management in real estate enterprise.", "mime": "application/pdf"}, {"id": "cet-1044", "words": "2732", "extension": ".pdf", "flesch": "36", "author": "Lyu, Hengyu; Zhao, Liang; Qin, Guosheng", "title": "Evaluation of the Water Flooding Development Potential at High Water Cut Reservoirs with the Multi-Level Fuzzy Synthetic Evaluation Method ", "date": "2017", "keywords": "development; evaluation; flooding; index; method; potential; reservoir; water", "summary": "In terms of high water cut reservoir, as the reservoir engineering method often can't reflect the potential of water flooding development, this paper selects geological and development factors with the grey correlation 1475 method combined with the Delphi method so as to establish an evaluation system of the water drive development potential at high water cut reservoirs for multi-level fuzzy comprehensive evaluation in combination of chromatography analysis and fuzzy evaluation methods. For high water cut reservoirs, conventional reservoir engineering methods, such as the production decline curve analysis method, the water drive characteristic curve analysis method, the forecasting model method and so on, are away from the actual situation at some degree in predicting the difference of water flooding development potential.", "mime": "application/pdf"}, {"id": "cet-1045", "words": "2749", "extension": ".pdf", "flesch": "24", "author": "Zhou, Rongrong", "title": "Empirical Study on the Relationship between Chemical Industry Agglomeration and Regional Economic Growth in Anhui Province ", "date": "2017", "keywords": "agglomeration; chemical; chemical industry; industry; river; yangtze", "summary": "In brief, it is of more realistic significance to clarify how chemical industry agglomeration can play a role in economic development and regional economic disparities for areas with a high-speed economic growth like Anhui Province (B\u00fcttner, 2013). DOI: 10.3303/CET1762247 Please cite this article as: Rongrong Zhou, 2017, Empirical study on the relationship between chemical industry agglomeration and regional economic growth in anhui province, Chemical Engineering Transactions, 62, 1477-1482 DOI:10.3303/CET1762247 1477 2.", "mime": "application/pdf"}, {"id": "cet-1046", "words": "2970", "extension": ".pdf", "flesch": "40", "author": "Pan, Yamei", "title": "Evaluation of Logistics Resource Allocation Efficiency in Chemical Industry Base ", "date": "2017", "keywords": "allocation; base; chemical; coal; efficiency; evaluation; input; logistics; resource; system", "summary": "DEA is used to reevaluate the efficiency of logistics resource allocation after overall planning and the optimal allocation strategy of logistics resources in the base are summarized. 3.2 Evaluation and analysis of input logistics resource allocation efficiency of base projects", "mime": "application/pdf"}, {"id": "cet-1047", "words": "2584", "extension": ".pdf", "flesch": "29", "author": "Li, Liang", "title": "Construction of Evaluation Index System of Petrochemical Industry Based on Material Flow Analysis Method ", "date": "2017", "keywords": "economy; flow; industry; material; petrochemical; resource; system; waste", "summary": "DOI: 10.1016/j.partic.2012.11.001 1493 Lu B., Qi Q., Yang Y., 2014, Insights on the development progress of National Demonstration eco-industrial parks in China, Journal of Cleaner Production, 70, 4-14, DOI: 10.1016/j.jclepro.2014.01.084 Ma S.H., Wen Z., Chen J., Wen Z., 2014, Mode of circular economy in China's iron and steel industry: a case study in Wu'an city, Journal of Cleaner Production, 64, 505-512, DOI: 10.1016/j.jclepro.2013.10.008 Ma S.J., Hu S., Chen D., 2015, A case study of a phosphorus chemical firm's application of resource efficiency and eco-efficiency in industrial metabolism under circular economy, Journal of Cleaner Production, 87, 839-849, DOI: 10.1016/j.jclepro.2014.10.059 Michael L., Amir R., 2016, Towards circular economy implementation: a comprehensive review in context of manufacturing industry, Journal of Cleaner Production, 115, 36-51, DOI: 10.1016/j.jclepro.2015.12.042 Ming P., Janusz S., Jethro A., 2016, Design technologies for eco-industrial parks: From unit operations to processes plants and industrial networks, Applied Energy, 175, 305-323, DOI: 10.1016/j.apenergy.2016.05.019 Miri\u00e3 F., Daniel A., Kleber E., 2016, Industrial symbiosis indicators to manage eco-industrial parks as dynamic systems, Journal of Cleaner Production, 118, 54-56, DOI: 10.1016/j.jclepro.2016.01.031 Patrizia G., Catia C., Sergio U., 2016, A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems, Journal of Cleaner Production, 114, 11-32, DOI: 10.1016/j.jclepro.2015.09.007 Roger A.S., 2016, Green chemistry and resource efficiency: towards a green economy, Green Chem, 18, 3180-3183, DOI: 10.1039/C6GC90040B Shu Y.P., Michael A.D., Te H., 2015, Strategies on implementation of waste-to-energy (WTE) supply chain for circular economy system: a review, Journal of Cleaner Production, 108, 409-421, DOI: 10.1016/j.jclepro.2015.06.124 Yao Z., Jian G.L., Bingchen Z., Wen H., Yi R.W., 2014, Adaptive Total Variation Regularization Based SAR Image Despeckling and Despeckling Evaluation Index, IEEE Transactions on Geoscience and Remote Sensing, 53(5), 2765-2774, DOI: 10.1109/TGRS.2014.2364525 Zhou Z., Zhao W., Chen X., Zeng H., 2017, MFCA extension from a circular economy perspective: Model modifications and case study, Journal of Cleaner Production, 149, 110-125, DOI: 10.1016/j.jclepro.2017.02.049 Zhu Q.H., Geng Y., Joseph S., 2015, Barriers to Promoting Eco-Industrial Parks Development in China, Journal of Industrial Ecology, 19(3), 457-467, DOI: 10.1111/jiec.12176 1494 The development of circular economy evaluation index system is the basic work to quantify the development of circular economy.", "mime": "application/pdf"}, {"id": "cet-1048", "words": "2997", "extension": ".pdf", "flesch": "44", "author": "Pan, Yamei", "title": "Establishment and Optimization of Green Logistics Fuel Consumption Model Based on Ant Colony Algorithm ", "date": "2017", "keywords": "algorithm; ant; colony; consumption; fuel; fuel consumption; logistics; path; vehicle", "summary": "In order to solve the problem of fuel consumption in logistics transportation, a better path planning is designed to reduce the fuel consumption of logistics from the point of vehicle path planning. First, the three factors are disassembled separately, and the results are checked individually, which is easier to discover the performance improvements brought about by various improvements (i.e., the decrease of fuel consumption).", "mime": "application/pdf"}, {"id": "cet-1049", "words": "3232", "extension": ".pdf", "flesch": "40", "author": "Wang, Ren", "title": "Study on the Construction of Garden Green Space in Petrochemical Enterprises ", "date": "2017", "keywords": "construction; control; doi; enterprises; garden; landscape; petrochemical; plant; pollution; soil; space", "summary": "Therefore, green plants can effectively improve water pollution, soil pollution and noise pollution. In the planning of garden green space, plant diversity is not only reflected in the diversity of plant species, but also should be diversified in the DOI: 10.3303/CET1762251 Please cite this article as: Ren Wang, 2017, Study on the construction of garden green space in petrochemical enterprises, Chemical Engineering Transactions, 62, 1501-1506 DOI:10.3303/CET1762251 1501 aspects of plant ecology, specifications, configuration techniques, and shrubs (P\u00e9rez-L\u00f3pez et al., 2014).", "mime": "application/pdf"}, {"id": "cet-1050", "words": "3212", "extension": ".pdf", "flesch": "10", "author": "Zhang, Wei", "title": "Construction and Stability Studies on Industrial Chain Network of Circular Economy of Organic Chemical Industry ", "date": "2017", "keywords": "chain; chemical; chemical industry; development; doi; economy; industry; production; waste", "summary": "Reference Bellantuono N., Carbonara N., Pontrandolfo P., 2017, The organization of eco-industrial parks and their sustainable practices, Journal of Cleaner Production, 161, 362-375, DOI: 10.1016/j.jclepro.2017.05.082 Geng Y., Fu J., Sarkis J., Xue B., 2012, Towards a national circular economy indicator system in China: An evaluation and critical analysis, Journal of Cleaner Production, 23(1), 216\u2013224, DOI: 10.1016/j.jclepro.2011.07.005 George D.A.R., Lin B.C., Chen Y.M., 2015, A circular economy model of economic growth, Environmental Modelling & Software, 73, 60-63, DOI: 10.1016/j.envsoft.2015.06.014 Go\u0142aszewska-Kaczan U., Kruk M., \u015aleszy\u0144ska-\u015awiderska A., 2015, Eco-Labelling as a Tool of CSR: Opportunities and Threats, DOI: 10.15290/ose.2015.05.77.12 Hill J.E., 2014, The circular economy: From waste to resource stewardship, Proceedings of the Instution of Civil Engineers, 168(1), 3\u201313, DOI: 10.1680/warm.14.00003 1511 Junior R., Best P., Cotter J., 2014, Sustainability reporting and assurance: A historical analysis of a world-wide phenomenon, Journal of Business Ethics, 120(1), 1\u201311, DOI: 10.1007/s10551-013-1637-y Lieder M., Rashid A., 2016, Towards circular economy implementation: a comprehensive review in context of manufacturing industry, 115, 36-51, DOI: 10.1016/j.jclepro.2015.12.042 Lu B., Qi Q., Yang Y., 2014, Insights on the development progress of National Demonstration eco-industrial parks in China, Journal of Cleaner Production, 70, 4-14, DOI: 10.1016/j.jclepro.2014.01.084 Ming P., Janusz S., Jethro A., 2016, Design technologies for eco-industrial parks: From unit operations to processes, plants and industrial networks, Applied Energy, 175, 305-323, DOI: 10.1016/j.apenergy.2016.05.019 Miria F., Daniel A., Kleber E., 2016, Industrial symbiosis indicators to manage eco-industrial parks as dynamic systems, Journal of Cleaner Production, 118, 54-56, DOI: 10.1016/j.jclepro.2016.01.031 Murray A., Skene K., Haynes K., 2017, The Circular Economy: An Interdisciplinary Exploration of the Concept and Application in a Global Context, Journal of Business Ethics, 140(3), 369-380, DOI: 10.1007/s10551- 015-2693-2 Qing H.Z., Yong G., Joseph S., 2015, Barriers to Promoting Eco-Industrial Parks Development in China, Journal of Industrial Ecology, 19(3), 457-467, DOI: 10.1111/jiec.12176 Roger A.S., 2016, Green chemistry and resource efficiency: towards a green economy, Green Chem, 18, 3180-3183, DOI: 10.1039/c6gc90040b Schneider A., 2015, Reflexivity in sustainability accounting and management: Transcending the economic focus of corporate sustainability, Journal of Business Ethics, 127(3), 525\u2013536, DOI:10.1007/s10551-014- 2058-2 Shu Y.P., Michael A.D., I-Te H., 2015, Strategies on implementation of waste-to-energy(WTE) supply chain for circular economy system: a review, Journal of Cleaner Production, 108, 409-421, DOI: 10.1016/j.jclepro.2015.06.124 Shujie M., Shanying H., Dingjiang C., 2015, A case study of a phosphorus chemical firm's application of resource efficiency and eco-efficiency in industrial metabolism under circular economy, Journal of Cleaner Production, 87, 839-849, DOI: 10.1016/j.jclepro.2014.10.059 Singh J., Ordonez I., 2016, Resource recovery from post-consumer waste: important lessons for the upcoming circular economy, Journal of Cleaner Production, 134, 342-353, DOI: 10.1016/j.jclepro.2015.12.020 Su B., Heshmati A., Geng Y., Yu X., 2013, A review of the circular economy in China: moving from rhetoric to implementation, Journal of Cleaner Production, 42, 215\u2013227, DOI: 10.1016/j.jclepro.2012.11.020 Zhou Z.F., Zhao W., Chen X., Zeng H., 2017, MFCA extension from a circular economy perspective: Model modifications and case study, Journal of Cleaner Production, 149, 110-125, DOI: 10.1016/j.jclepro.2017.02.049 1512 Based on the concept and theories of circular economy, this paper designs a series of circular economy target system of chemical industry, builds the effectiveness evaluation model through combining with practical situation of chemical industry, and proposes that building chemical industry parks is the reasonable model of circular economy development.", "mime": "application/pdf"}, {"id": "cet-10510", "words": "2866", "extension": ".pdf", "flesch": "53", "author": "Valeekiatkul, Siwat; Siemanond, Kitipat", "title": "Mathematical Programming for Heat Exchanger Network Design with Temperature-Dependent Specific Heat Capacity", "date": "2019", "keywords": "heat; hen; model; temperature; \ud835\udc41\ud835\udc42\ud835\udc43", "summary": "Moreover, average Cp calculation for each stage has high accuracy and it is free to calculate without any fixed Cp data from user. It shows that new Cp linearization technique give higher accuracy for Cp calculation.", "mime": "application/pdf"}, {"id": "cet-10511", "words": "4091", "extension": ".htm", "flesch": "51", "author": "Konecna, Eva; Masa, Vitezslav", "title": "Review of Gas Microturbine Application in Industry", "date": "2019", "keywords": "chp; energy; et al; fuel; gas; generation; gmt; heat; microturbine; power", "summary": "Caresana et al., 2011 6x100 x landfill landfill biogas fuel Ferreira et al., 2015 30, 65 x manufacturing direct use of GMT exhaust Ge et al., 2013 80 x food retail CO2 refrigeration Huicochea et al., 2011 28 x power generation double effect absorption chiller Invernizzi et al., 2007 100 x power generation Micro Rankine cycle Kalantar and Mousavi, 2010 230 power generation wind turbine, solar, battery, GMT Massardo et al., 2002 50 x power generation SOFC, GMT M\u00e1\u0161a et al., 2017 30 x laundry treatment direct use of GMT exhaust MosayebNezhad et al., 2018 30, 65 x wastewater treatment SOFC, GMT Nelson et al., 2018 100 x power generation solarized GMT Pantaleo et al., 2013 100 x power generation biomass and natural gas Pantaleo et al., 2018 100 x coffee roasting Comparison with ORC unit Tassou et al., 2007 80 x food retail HE, absorption chiller Velumani et al., 2009 30 x power generation SOFC, GMT, According to Isa et al. (2018), CHP systems can help to achieve goals of smart grid integration.", "mime": "application/pdf"}, {"id": "cet-10512", "words": "3678", "extension": ".pdf", "flesch": "52", "author": "Vasickaninova, Anna; Bakosova, Monika; Oravec, Juraj; Meszaros, Alajos", "title": "Control of Heat Exchangers Using Complex Control Structures with Neural Network Predictive Controllers", "date": "2019", "keywords": "control; controller; heat; input; network; nnpc; predictive; process", "summary": "They analysed also robust stability, violation of constraints on control inputs and controlled outputs, energy savings, and overall computational complexity of the control algorithm. According to the IAE, ISE and V, the best control structure is the NNPC-based control system with and auxiliary control input.", "mime": "application/pdf"}, {"id": "cet-10513", "words": "3718", "extension": ".pdf", "flesch": "55", "author": "Lai, Yee Qing; Wan Alwi, Sharifah Rafidah; Manan, Zainuddin Abdul", "title": "Heat Exchanger Network Retrofit Considering Physical Distance, Pressure Drop and Available Equipment Space", "date": "2019", "keywords": "cost; drop; exchanger; heat; hen; pressure; process; retrofit; stream", "summary": "Heat exchanger pressure drop gets the most attention amongst all other retrofit constraints. On the other hand, distance pressure drop is highlighted in total site heat integration (TSHI).", "mime": "application/pdf"}, {"id": "cet-10514", "words": "3539", "extension": ".pdf", "flesch": "53", "author": "Seevers, Jan-Peter; Schlosser, Florian", "title": "Integration of Heat Pump Storage Systems in Manufacturing Systems via Data Farming and Monte Carlo Simulation", "date": "2019", "keywords": "flow; heat; material; simulation; standby; storage", "summary": "376 Figure 4: Heat sink storage sizes in m\u00b3 for standby scenario 2 and varying HP sizes After having chosen the 5 % and 10 % HP sizes for both scenarios, four statistical distributions of the heat sink storage sizing are the output of another 4*200=800 storage dimensioning calculations. They support the core statements of the research of Stoltze et al. (1995) that a theoretically large number of heat storages (double the number of process streams) can be reduced to a few. 5.", "mime": "application/pdf"}, {"id": "cet-10515", "words": "3438", "extension": ".pdf", "flesch": "61", "author": "Toman, Filip; Kracik, Petr; Pospisil, Jiri; Spilacek, Michal", "title": "Comparison of Different Concepts of Condensation Heat Exchangers With Vertically Oriented Pipes for Effective Heat and Water Regeneration", "date": "2019", "keywords": "condensation; coolant; heat; mode; pipe; steam; temperature; transfer", "summary": "Most vertical heat exchangers in which steam condensation occurs use coolant flowing from the outside of the condenser pipe wall for heat rejection. Mode 2 (the second case) describes steam condensation in a vertical pipe where the coolant flows along the inner pipe wall together with the steam.", "mime": "application/pdf"}, {"id": "cet-10516", "words": "3491", "extension": ".pdf", "flesch": "62", "author": "Li, Bao-Hong; Li, Ji-Wen", "title": "Comparison of Graphical Tools for Targeting and Retrofit of Heat Exchanger Networks", "date": "2019", "keywords": "energy; exchanger; heat; hen; network; retrofit; step", "summary": "Lai Y.Q., Manan Z.A., Wan Alwi S.R. Simultaneous diagnosis and retrofit of heat exchanger network via individual process stream mapping. Linnhoff B., Flower J.R. Synthesis of heat exchanger networks.", "mime": "application/pdf"}, {"id": "cet-10517", "words": "4514", "extension": ".pdf", "flesch": "55", "author": "Cowen, Nick; Vogel, Andy; Isafiade, Adeniyi Jide; Cucek, Lidija; Kravanja, Zdravko", "title": "Synthesis of Combined Heat Exchange Network and Utility Supply Chain", "date": "2019", "keywords": "cost; demand; feedstock; heat; plant; process; supply; utility", "summary": "In the model, agricultural seasons (denoted by index t) have their durations represented by the parameter Lt, to capture the length of each season, with feedstock costs varying from season to season. \ud835\udc34\ud835\udc5d \ud835\udc39 in Eq(6) represents annualization factor (in y-1), \ud835\udc36\ud835\udc5d \ud835\udc39 represents fixed heat exchanger cost (in $), \ud835\udc66\ud835\udc5d,\ud835\udc56,\ud835\udc57,\ud835\udc58 represents binary variable which indicates the existence or otherwise of a heat exchanger in plant p, \ud835\udc34\ud835\udc5d \ud835\udc36 represents heat exchanger area cost (in $/m2), \ud835\udc34\ud835\udc5d \ud835\udc38 represents heat exchanger area cost exponent, and \ud835\udc36\ud835\udc5d,\ud835\udc57,\ud835\udc61 represents cost per unit of cold utility (in $/kW).", "mime": "application/pdf"}, {"id": "cet-10518", "words": "4221", "extension": ".pdf", "flesch": "58", "author": "Pavao, Leandro V.; Costa, Caliane B. B.; Ravagnani, Mauro A. S. S.", "title": "Synthesis of Work and Heat Exchange Networks Considering Practical Operating Constraints", "date": "2019", "keywords": "heat; pressure; shaft; streams; synthesis; temperature; work", "summary": "By observing stream temperatures (all within a range of 350 to 600 K), it can be stated that this is an above-ambient process and that compression may lead to undesirably high temperatures. Briefly, the simultaneous work/heat integration problem can be described as: given a set of process streams (which can be hot or cold to be expanded or compressed), it is necessary to find the optimal configuration of heat exchangers and pressure manipulators that lead those streams to their target conditions.", "mime": "application/pdf"}, {"id": "cet-10519", "words": "3797", "extension": ".pdf", "flesch": "48", "author": "Hafizan, Ainur Munirah; Wan Alwi, Sharifah Rafidah; Manan, Zainuddin Abdul; Klemes, Jiri Jaromir; Hamid, Mohd Kamaruddin Abd", "title": "Cost Optimisation of a Flexible Heat Exchanger Network with Fluctuation Probability using Break-Even Analysis", "date": "2019", "keywords": "break; cost; fluctuation; hem; mer; probability; stream; temperature", "summary": "This study presents the cost optimisation of flexible MER HEN design which considers the fluctuation probability using break-even analysis. The motivation of this paper is to present the cost optimisation of flexible HEN for grassroots design considering fluctuation probability, and its trade-off between MER and total cost.", "mime": "application/pdf"}, {"id": "cet-10520", "words": "3718", "extension": ".pdf", "flesch": "54", "author": "Zhang, Ruihang; Wu, Chufan; Song, Wuwenjie; Deng, Chun", "title": "Energy Integration of LNG Light Hydrocarbon Recovery and Air Separation", "date": "2019", "keywords": "air; cold; energy; lng; nitrogen; process; separation; stream; temperature", "summary": "Air separation process is the most common type used in Chinese LNG receiving terminals, and the utilization ratio of LNG cold energy is only about 40 %. Results show the utilization ratio of LNG cold energy is increased by 35.77 %.", "mime": "application/pdf"}, {"id": "cet-10521", "words": "3868", "extension": ".pdf", "flesch": "59", "author": "Gai, Limei; Varbanov, Petar Sabev; Walmsley, Timothy Gordon; Klemes, Jiri Jaromir", "title": "Process Integration Using a Joule Cycle Heat Pump", "date": "2019", "keywords": "cop; energy; heat; integration; jchp; process; pump; temperature; working", "summary": "As a result, heat pumps have received considerable attention and development, becoming an essential energy saving technology. The idea of using heat pumps in Process Integration has been assessed in many recent studies.", "mime": "application/pdf"}, {"id": "cet-10522", "words": "3478", "extension": ".pdf", "flesch": "51", "author": "Ravipati, Disha; Singh, Shweta; Pandya, Harmitkumar; Dalai, Sridhar", "title": "Energy Savings in Cement Industry: Use of Heat Integration Approach and Simulation Tools", "date": "2019", "keywords": "cost; design; energy; exchanger; heat; minimum; pinch; process; temperature", "summary": "Manizadeh A., Entezari A. and Ahmadi R., 2018, The energy and economic target optimization of a naphtha production unit by implementing energy Pinch Technology, Case Studies in Thermal Engineering, 12, 396- 404. It is an important design parameter for the development of energy efficient Heat Exchanger Network, as its value affects capital and operating costs of the plant (AbuBakar et al., 2015)", "mime": "application/pdf"}, {"id": "cet-10701", "words": "3008", "extension": ".htm", "flesch": "55", "author": "Trinh, Dung V. ; Nguyen, Phuong T. H.", "title": "Minimising the Cost of Spirulina platensis Culture Medium using Vinh Hao Natural Mineral Water", "date": "2020", "keywords": "algae; hao; medium; mineral; platensis; vinh; water; zarrouk", "summary": "The obtained medium was also assessed by comparing the growth rate of S. platensis algae cultured in Vinh Hao medium with that in Zarrouk medium under the same conditions. Table 10: pH changes in the culture medium Day S1 S2 Zarrouk 1 8.50 8.55 8.50 2 8.70 8.80 8.70 3 9.20 9.30 9.30 4 9.45 9.50 9.60 5 9.60 9.65 9.70 6 9.70 9.80 9.80 7 9.90 9.95 9.90 8 10.15 10.25 10.25 3.3 Biomass growth rate Figure 1 shows that the biomass growth rate of S. platensis algae in Vinh Hao medium was similar to that in Zarrouk medium.", "mime": "application/pdf"}, {"id": "cet-10702", "words": "3741", "extension": ".pdf", "flesch": "49", "author": "Tay, Syn Yee; Mohammad Rozali, Nor Erniza; Wan Alwi, Sharifah Rafidah; Ho, Wai Shin; Abdul Manan, Zainuddin; Klemes, Jiri Jaromir", "title": "Design of Grid-tied Hybrid Diesel-Renewable Energy Systems Using Power Pinch Analysis", "date": "2020", "keywords": "cost; diesel; electricity; energy; grid; hybrid; load; power; sources; system", "summary": "Diesel power system has been one of the most popular methods for electrification. Mohammad Rozali et al. (2019) later presented an extended PoPA tool called the Probability-Power Pinch Analysis (P-PoPA) that utilise probability theory to integrate diesel system with RE within a shorter time of analysis.", "mime": "application/pdf"}, {"id": "cet-10703", "words": "3634", "extension": ".pdf", "flesch": "48", "author": "Zailan, Zarifah; Ali, Hilman; Chau, Jia Wen; Jusoh, Mazura; Tahir, Muhammad; Zakaria, Zaki Yamani", "title": "Development of Sulphonated Sago Pith Waste Catalyst for Esterification of Palm Fatty Acid Distillate to Methyl Ester", "date": "2020", "keywords": "acid; biodiesel; catalyst; partial; pfad; spw; sulfonation; temperature; time", "summary": "After cooling the sulfonated partial carbonized SPW catalyst, it was filtered and washed with excessive distilled water. One factor at a time (OFAT) method was carried out to determine the optimum preparation condition for sulfonated SPW catalyst and the produced catalysts were characterized to study its morphology, crystallinity, surface area and acid density.", "mime": "application/pdf"}, {"id": "cet-10704", "words": "3953", "extension": ".pdf", "flesch": "46", "author": "Mohd Syukri, Mohd Syahlan; Abd Rahman, Roshanida; Mohamad, Zurina; Nik Mahmood, Nik Azmi; Md Illias, Rosli; Tokuyama, Hideaki", "title": "Laccase Immobilisation on Poly(ethylene) Terephthalate Grafted with Maleic Anhydride (PET-g-MAH) Nanofiber Mat", "date": "2020", "keywords": "enzyme; immobilisation; laccase; mah; mats; nanofiber; nanofiber mats; pet; polymer", "summary": "Two parameters studied were the immobilisation yield and the protein loading at three different immobilisation methods which were physical adsorption on PET nanofiber mats (PA), covalent bonding on PET-g-MAH nanofiber mats (CV) and covalent bonding of cross-linked laccase aggregate on PET-g-MAH nanofiber mats (CL) using glutaraldehyde as crosslinker. The first method was the PA method which was direct immobilisation of laccase on PET nanofiber mats without grafting MAH on the surface.", "mime": "application/pdf"}, {"id": "cet-10705", "words": "3356", "extension": ".pdf", "flesch": "50", "author": "Phromphithak, Sanphawat; Tippayawong, Nakorn", "title": "Transesterification of Palm Oils Catalyzed by Ionic Liquid in Microwave Heated Reactors", "date": "2020", "keywords": "biodiesel; catalyst; choh; ester; heating; liquid; methanol; microwave; oil; palm; production", "summary": "The objective of this study was to investigate ChOH ionic liquid catalyst for transesterification in batch and continuous microwave heating processes. To the authors\u2019 knowledge, this was the first time that ChOH ionic liquid was investigated in a microwave heated, continuous flow reactor.", "mime": "application/pdf"}, {"id": "cet-10706", "words": "3520", "extension": ".pdf", "flesch": "54", "author": "Chumsawat, Lalita; Tippayawong, Nakorn", "title": "Utilizing Tobacco Residues to Generate Bio-oil and Biochar via Ablative Pyrolysis", "date": "2020", "keywords": "bio; carbon; char; chemical; energy; oil; pyrolysis; residues; tobacco; tobacco residues", "summary": "From the existing literature, reported works on physico-chemical properties and lignocelulosic composition of tobacco residues remain scarce. To the authors\u2019 knowledge, no report is yet available on applying ablative pyrolysis to tobacco residues to generate bio-oil and biochar.", "mime": "application/pdf"}, {"id": "cet-10707", "words": "3337", "extension": ".pdf", "flesch": "52", "author": "Onlamnao, Khajornsak; Tippayawong, Nakorn", "title": "Organic Liquid Products from Cracking of Used Cooking Oils with Commercial Catalysts", "date": "2020", "keywords": "catalysts; cooking; cracking; oil; oils; re-16; reactor; tippayawong", "summary": "Used cooking oils are one of the major wastes from food processing in Thailand. This study focused on catalytic cracking of used cooking oils over two commercial (Z and Y zeolite) catalysts to generate light organic liquid products.", "mime": "application/pdf"}, {"id": "cet-10708", "words": "3576", "extension": ".pdf", "flesch": "56", "author": "Le, Tran Trung Nghia ; Le, Van Cuong; Le, Tien Phat; Nguyen, Thi Tra My; Ho, Huu Dat; Le, Khac Hung; Tran, Minh Hien; Nguyen, Thai Hoang; Pham, Trong Liem Chau; Nam, Hoang Minh; Phong, Mai Thanh; Hieu, Nguyen Huu", "title": "Synthesis of Zinc Oxide/Reduced Graphene Oxide Composites for Fabrication of Anodes in Dye-Sensitized Solar Cells", "date": "2020", "keywords": "anodes; dsscs; efficiency; graphene; oxide; rgo; rgo3; structure; zno", "summary": "The absorption band at about 380 nm of ZnO or ZnO/rGO patterns could be attributed to the highly crystalline of ZnO structure. The efficiencies of ZnO/rGO1, ZnO/rGO2, and ZnO/rGO3 DSSCs were 1.25, 1.47, and 1.55 %, which were higher than that of ZnO DSSC (1.08 %).", "mime": "application/pdf"}, {"id": "cet-10709", "words": "2971", "extension": ".pdf", "flesch": "42", "author": "Truong-Lam, Hai S.; Kim, Suhkmann; Seo, Seong Deok; Jeon, Changsu; Lee, Ju Dong", "title": "Water Purifying by Gas Hydrate: Potential Applications to Desalination and Wastewater Treatments", "date": "2020", "keywords": "desalination; gas; hydrate; process; seawater; treatment; wastewater; water", "summary": "Figure 1: A concept for water treatments via gas hydrate process Several researchers have devoted their efforts to understanding the hydrate-based water treatment. Kang, K. C., Linga, P., Park, K. N., Choi, S. J., Lee, J. D., 2014, Seawater desalination by gas hydrate process and removal characteristics of dissolved ions (Na+, K+, Mg2+, Ca2+, B3+, Cl\u2212, SO4 2\u2212), Desalination, 353, 84- 90.", "mime": "application/pdf"}, {"id": "cet-10710", "words": "3405", "extension": ".pdf", "flesch": "38", "author": "Jaroenkhasemmeesuk, Chawannat; Tippayawong, Nakorn; Ingham, Derek B.; Pourkashanian, Mohammed", "title": "Process Modelling and Simulation of Fast Pyrolysis Plant of Lignocellulosic Biomass Using Improved Chemical Kinetics in Aspen Plus\u00ae", "date": "2020", "keywords": "aspen; biomass; model; plant; process; product; pyrolysis; simulation; yield", "summary": "This work presents a comprehensive Aspen Plus\u00ae modeling work of fast pyrolysis processes for lignocellulosic biomass based on kinetic reaction mechanisms. This work aims to present a comprehensive Aspen Plus\u00ae modeling work of fast pyrolysis processes for lignocellulosic biomass based on only main kinetic reaction mechanisms from Pelucchi et al. (2018), of pyrolysis process of lignocellulosic biomass.", "mime": "application/pdf"}, {"id": "cet-10711", "words": "3920", "extension": ".pdf", "flesch": "51", "author": "Trung, Bien Cong; An, Ngo Thanh; Long, Nguyen Quang", "title": "Carbon Grain Supported Nano-Sized Au for Low Temperature Removal of VOCs in Humid Condition: Effect of Catalyst\u2019s Synthesis Conditions", "date": "2020", "keywords": "carbon; gc-4; nano; oxidation; removal; size; toluene", "summary": "For the above reasons and for development of a ready-to-use catalyst, this study has focused on i) utilization of granular carbon (GC) as support in the synthesis of nano Au catalyst by a metal-sol method; ii) investigation of the VOCs removal at low temperatures using the nano Au catalysts under high humid condition; iii) synergetic effect between adsorption and catalytic oxidation and iv) catalyst stability evaluation with/without water vapor. Because Au nanoparticles may have oxidative activity when Au nanoparticle size is less than 10 nm (Haruta et al., 1989).", "mime": "application/pdf"}, {"id": "cet-10712", "words": "3396", "extension": ".pdf", "flesch": "42", "author": "Mah, Angel Xin Yee; Ho, Wai Shin; Hassim, Mimi H. ; Hashim, Haslenda; Liew, Peng Yen; Asli, Umi Aisah; Ab Muis, Zarina; Ling, Gabriel Hoh Teck", "title": "Optimization of Hydrogen Supply Chain: A Case Study in Malaysia", "date": "2020", "keywords": "cost; district; electricity; energy; form; fuel; hydrogen; hydrogen form; transportation", "summary": "i at electrolysis plant e in district g, ECapmin ei is the minimum capacity of electrolysis plant e producing hydrogen form i, ECapmax ei is maximum capacity of electrolysis plant e producing hydrogen form i and NEeig is the number of electrolysis plant e producing hydrogen form i in district g. 87 Eq(16) and (17) indicate that the capacity of inverter is dependent on the amount electricity from PV panel or fuel cell, whichever is greater. [\u2211 (\u2211 \ud835\udc48\ud835\udc43\ud835\udc36\ud835\udc5d\ud835\udc56\ud835\udc43\ud835\udc45\ud835\udc5d\ud835\udc56\ud835\udc54 + \u2211 \ud835\udc48\ud835\udc46\ud835\udc36\ud835\udc60\ud835\udc56\ud835\udc46\ud835\udc3c\ud835\udc60\ud835\udc56\ud835\udc54\ud835\udc60 + \u2211 \ud835\udc48\ud835\udc38\ud835\udc36\ud835\udc52\ud835\udc56\ud835\udc43\ud835\udc38\ud835\udc52\ud835\udc56\ud835\udc54\ud835\udc52\ud835\udc5d ) + \ud835\udc43\ud835\udc49\ud835\udc54 \ud835\udc34 \ud835\udc43\ud835\udc49\ud835\udc38\ud835\udc39\ud835\udc39\ud835\udc43\ud835\udc49\ud835\udc48\ud835\udc36 + \ud835\udc39\ud835\udc36\ud835\udc54 \ud835\udc36\ud835\udc34\ud835\udc43 \ud835\udc39\ud835\udc36\ud835\udc48\ud835\udc36\ud835\udc56 ]\ud835\udc54 (21) where TDC is total daily cost, FCC is facility capital cost, TCC is transportation capital cost, FOC is facility operating cost, TOC is transportation operating cost, \u03b1 is network operating period, CCF is capital change factor, PCCpi is capital cost of production technology p producing hydrogen form i, SCCsi is capital cost of storage unit s for hydrogen form i, ECCei is capital cost of electrolysis plant e producing hydrogen form i, PVCC is unit capital cost of PV system, FCCC is unit capital cost of fuel cell, INVCC is unit capital cost of inverter, UPCpi is unit production cost of production plant p producing hydrogen form", "mime": "application/pdf"}, {"id": "cet-10713", "words": "3823", "extension": ".pdf", "flesch": "56", "author": "Nguyen, Trung H.; Tran, An M. N.; Tran, Nghi; Trinh, Dung V. ", "title": "Modelling of the Spray Coating Process with Biodegradable Polymer Solution for Production of Controlled-Release Fertiliser", "date": "2020", "keywords": "coating; image; process; smd; solution; spray", "summary": "2.4 Analyze images to determine the size of the droplets and spray area Videos with a speed of 1,000 fps, which recorded the spray coating process, are transferred to MATLAB software. Table 2: The parameters of the spray coating process i Parameters Symbol Unit Dimension 1 Droplet SMD \ud835\udc5132 m L 2 Width of spray area \ud835\udc35 m L 3 Nozzle diameter", "mime": "application/pdf"}, {"id": "cet-10836", "words": "3561", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-10836", "date": null, "keywords": "adsorption; aerogel; dissolution; msa; pressure; silica; toc; vitamin", "summary": "3.2 Kinetics of TOC adsorption into silica and starch aerogel To evaluate the time needed for the complete adsorption of the \u03b1\u2013tocopherol on the two supports, the adsorption kinetics were determined. De Marco I., Reverchon E., 2017, Starch aerogel loaded with poorly water-soluble vitamins through supercritical CO2 adsorption, Chemical Engineering Research and Design, 119, 221\u2013230.", "mime": "application/pdf"}, {"id": "cet-10837", "words": "3609", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-10837", "date": null, "keywords": "ampi; bar; coprecipitation; drug; eudragit; l100; microparticles; pressure; sas", "summary": "(a) (b) Figure 1: FESEM images of Eudragit particles precipitated from DMSO at 40 \u00b0C and 20 mg/mL. Effect of the operating pressure: (a) 90 bar; (b) 100 bar. Among various carriers, Eudragit polymers have gained considerable interest in the pharmaceutical field due to their wide versatility, due to the different solubilities at different pH values (Singh et al., 2015).", "mime": "application/pdf"}, {"id": "cet-10838", "words": "3207", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-10838", "date": null, "keywords": "co2; hfp; levan; membranes; process; pvdf; reverchon", "summary": "A yield of about 20% (mg polyfructose/mg initial sucrose) was obtained; this value is relevant and confirms the successful of levan production process (Tabernero et al., 2017). This is an interesting result, because it confirmed as the SC-CO2 assisted phase inversion is a process capable to generate porous composite structures suitable for tissue engineering applications, whereas the increase of cell adhesion was produced thanks to levan properties and its chemical composition.", "mime": "application/pdf"}, {"id": "cet-10839", "words": "2974", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-10839", "date": null, "keywords": "bar; co2; foaming; foams; pores; pressure; temperature", "summary": "Chen, C.X., Liu, Q.Q., Xin, X., Guan, Y.X., Yao, S.J., 2016, Pore formation of poly(\u03b5-caprolactone) scaffolds with melting point reduction in supercritical CO2 foaming, J. Supercrit. For this reason, ecological techniques have been developed to perform this process, such as the use of supercritical CO2 (SC- CO2) (Reverchon et al., 2007b).", "mime": "application/pdf"}, {"id": "cet-10840", "words": "3680", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-10840", "date": null, "keywords": "aerogels; curcumin; drying; hfp; pvdf; release", "summary": "The aim was to determine their applicability as controlled release systems, once the kinetics of curcumin release from the polymeric matrix was measured in dependence of the polymer percentage and of the aerogel morphology. There are several examples of polymeric aerogels successfully obtained by supercritical drying process (De Marco et al., 2015a).", "mime": "application/pdf"}, {"id": "cet-10841", "words": "3226", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-10841", "date": null, "keywords": "aerogel; carbon; impregnation; lca; marco; production; starch", "summary": ": Life cycle inventory of the main inputs and outputs for starch aerogel production, and nimesulide impregnation on starch aerogel with respect to 1.5 g tablet. In this work, the environmental impacts of starch aerogel loaded with nimesulide, a widely employed nonsteroidal anti-inflammatory drug, using supercritical carbon dioxide impregnation were calculated, following a Life Cycle Assessment (LCA) approach.", "mime": "application/pdf"}, {"id": "cet-10842", "words": "2787", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-10842", "date": null, "keywords": "barley; biosurfactant; oil; production; sclerotiorum; surface; whey", "summary": "Table 1: Variables and levels of Central Composite Rotational Design (CCRD) for biosurfactant production by P. sclerotiorum. Table 2: Surface tension (ST) as a parameter to evaluate biosurfactant production by P. sclerotiorum in medium containing whey and barley.", "mime": "application/pdf"}, {"id": "cet-10843", "words": "3518", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-10843", "date": null, "keywords": "butyricum; concentration; et al; fermentation; hydrogen; production", "summary": "Waste has high content of cellulose and hemicellulose (Mishra et al., 2010), so it is possible to use this waste as raw material for producing animal feed (Agneesens et al., 2010), organic acids (Karthikeyan and Sivakumar, 2010), bio fertilizers (Scarlett et al., 20018), medical uses (Scarlett et al., 20018), and clean energies by biological processes as a good source of sugar (Kulkarni et al., 2016). Bioreactor designed and build for hydrogen production.", "mime": "application/pdf"}, {"id": "cet-10844", "words": "3008", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-10844", "date": null, "keywords": "astaxanthin; biomass; cosmetic; extraction; haematococcus; haematococcus pluvialis; microalgae; pluvialis", "summary": "Powder is the powder derived from the Alga, Haematococcus pluvialis, Stephanosphaeraceae Antioxidant unavailable Dunaliella salina/Haematococcus pluvialis Extract Dunaliella Salina/Haematococcus pluvialis Extract is the extract of the alga, Dunaliella salina and Haematococcus pluvialis Antioxidant Skin protecting 272 The aim of this work was to evaluate the economic feasibility of a natural astaxanthin production based on the cultivation of Haematococcus pluvialis microalgae and the subsequent antioxidant extraction via supercritical CO2 utilization. Natural astaxanthin production via Haematococcus pluvialis microalgae cultivation, dewatering,biomass drying and pretreatment, pigment extraction and carbon dioxide recovery and recycle.", "mime": "application/pdf"}, {"id": "cet-10845", "words": "3098", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-10845", "date": null, "keywords": "biomass; dha; epa; extraction; growth; microalgae; oil; regulation", "summary": "The mechanical pretreatment which allows to perform cell disruption, should affect the process economy to a lesser extent, i.e. 0.56%, since the energy demand for this operation is estimated to be in the range of 1-2 kWh/day (0.5-1.0 kg/day of dry biomass to treat).The projected cost for growth phase plant, mainly depending on the use of light irradiation source required for the correct microalgae survival and growth,should contribute for ~7.13% and nutrients for around 1.29%. The supercritical CO2 extractionhas underlined a product composed by 78.9 wt% of proteins and 13.1wt % of lipids, while the rest (about 8%)has been constitutedbycarbohydrated, TDF and ashes.", "mime": "application/pdf"}, {"id": "cet-10846", "words": "3478", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-10846", "date": null, "keywords": "cocoa; energy; gvs; hydrogen; load; production; temperature", "summary": "Given the demand for production and, as mentioned above, an alternative to hydrogen production as a source of clean energy is residual biomass. Finally, it is essential to mention that the pH was adjusted to 5.5, which turned out to be suitable to aid production yields, as several studies have shown that pH between 5 and 6 have been optimal for higher hydrogen production yields (Balachandar et al., 2013).", "mime": "application/pdf"}, {"id": "cet-10847", "words": "3035", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-10847", "date": null, "keywords": "acid; concentration; glucose; production; productivity; succinic; sucrose; sugars; xylose", "summary": "Jiang, M., Dai, W., Xi, Y., Wu, M., Kong, X., Ma, J., Wei, P., 2014, Succinic acid production from sucrose by Actinobacillus succinogenes NJ113,Bioresource technology, 153, 327-332. Lin, S. K. C., Du, C., Koutinas, A., Wang, R., & Webb, C., 2008, Substrate and product inhibition kinetics in succinic acid production by Actinobacillus succinogenes.", "mime": "application/pdf"}, {"id": "cet-10848", "words": "2990", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-10848", "date": null, "keywords": "adsorption; astaxanthin; carbon; extraction; microalgae; molino", "summary": "Before astaxanthin extraction, HPR microalgae was mechanically pre-treated by Retsch PM200 planetary ball mill at 400 rpm for 5 minutes to enhance astaxanthin extraction yield. Extraction processes has been abundantly studied for astaxanthin from Haematococcus pluvialis by testing different technologies such as extraction by using organic solvent as ethanol, acetone, hexane and chloroform and methanol mixture (1:1 v/v)(Molino et al., 2018a) or by new unexplored solvent as butanol, cyclohexane, ethyl acetate (Samori et al., 2019), extraction by supercritical fluids by using CO2 (Sanzo et al., 2018), acid pre-treatment and homogenization (Kang et al., 2008) with the aim of improving extraction astaxanthin yield.", "mime": "application/pdf"}, {"id": "cet-10849", "words": "2815", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-10849", "date": null, "keywords": "arsenic; as(iii; orp; oxidation; reactor", "summary": "Arsenic oxidation was highly favoured in anaerobic conditions than in aerobic conditions. Arsenic oxidation was highly favoured in anaerobic conditions than in aerobic conditions.", "mime": "application/pdf"}, {"id": "cet-11021", "words": "3267", "extension": ".htm", "flesch": "58", "author": "Wu, Xinghong; Wu, Yan; Wang, Yufei; Feng, Xiao", "title": "Multi-Period Optimization of Floating Wind Farm for Open Sea Nature Gas Hydrates Exploitation", "date": "2020", "keywords": "effect; energy; farm; layout; period; speed; turbines; wake; wind", "summary": "Wind resource varies with seasons significantly and the location of wind turbines (WTs) can be changed in different time. For example, Feng and Shen (2017) carried out wind farm layout for Danish Horns Rev I wind farm by using multiple types of wind turbines as optimization variables.", "mime": "application/pdf"}, {"id": "cet-11022", "words": "3291", "extension": ".pdf", "flesch": "56", "author": "Mart\u00ednez-Rodr\u00edguez, Guillermo ; Rumbo-Arias, Jamel E. ; Pic\u00f3n-N\u00fa\u00f1ez, Mart\u00edn ", "title": "Extending the Use of Welded Plate Heat Exchangers to Multi-Stream Applications", "date": "2020", "keywords": "compabloc; design; exchanger; flow; heat; number; plate; stream; transfer; units", "summary": "The construction of compabloc plate heat exchangers is such that the fluids flow in a crossflow arrangement in each pass. Polley, G. T., Haslego C., 2002, Compact heat exchangers, Part 2: Using plate heat exchangers in heat recovery networks, Chemical Engineering Progress, 98, 10, 48-51.", "mime": "application/pdf"}, {"id": "cet-11023", "words": "3618", "extension": ".pdf", "flesch": "49", "author": "Iqbal, Kashif; Jiang, Wei; Deng, Chun", "title": "Improved Superstructural Optimisation of an Industrial Water System with Multiple Water Resources", "date": "2020", "keywords": "dws; freshwater; model; system; treatment; water", "summary": "The proposed mathematical model provides appropriate water resource selection to acquire freshwater for the industrial water network and integrates all possible functional designs for water treatment, reuse, and recycling. The overall industrial water system superstructure presented by Gunaratnam et al. (2005) and optimised wastewater processing and water systems simultaneously.", "mime": "application/pdf"}, {"id": "cet-11024", "words": "3675", "extension": ".pdf", "flesch": "55", "author": "Fuentes-Silva, Amanda Lucero ; Vel\u00e1zquez-Torres, Daniel ; Pic\u00f3n-N\u00fa\u00f1ez, Mart\u00edn ; Mart\u00ednez-Rodr\u00edguez, Guillermo ", "title": "Solar Thermal Integration With and Without Energy Storage: The Cases of Bioethanol and a Dairy Plant", "date": "2020", "keywords": "cost; energy; heat; integration; network; plant; storage; system; thermal; total", "summary": "Solar thermal plant costs The cost of the thermal system is analysed under two modes of operation: a) the whole external energy requirement is supplied by the solar thermal plant and no heat recovery within the plant is considered, and b) solar thermal energy is determined after heat recovery within the plant takes place. It has been identified that between 50 and 70 % of total solar thermal energy costs are related to the capital investment, while the rest includes the costs of installation of the devices and the energy integration (Carbon Trust, 2013).", "mime": "application/pdf"}, {"id": "cet-11025", "words": "3455", "extension": ".pdf", "flesch": "48", "author": "Elfeky, Karem Elsayed; Mohammed, Abubakar Gambo; Wang, Qiuwang", "title": "Numerical Investigation of Cycle Cut-off Criterion on System Performance of Thermocline Tank", "date": "2020", "keywords": "case; cut; efficiency; energy; htf; storage; tank; temperature", "summary": "Figure 1: Schematic diagram of packed bed thermal storage system In the present study, making comparison between the system performance with change in the cut-off temperature difference. Thermal energy storage (TES) has attracted considerable attention from researchers around the world because of its effectiveness in terms of efficiency and cost for all applications of solar energy at low, medium and high temperatures (Jiang et al., 2019).", "mime": "application/pdf"}, {"id": "cet-11026", "words": "3618", "extension": ".pdf", "flesch": "51", "author": "Elfeky, Karem Elsayed; Mohammed, Abubakar Gambo; Wang, Qiuwang", "title": "Numerical Study on the Performance of Thermocline Tank for Hybrid Solar Tower Power Plants using DEM-CFD Coupled Method", "date": "2020", "keywords": "energy; htf; region; spheres; tank; temperature; tes; wall", "summary": "Li B., Ju F., 2018, Thermal stability of granite for high temperature thermal energy storage in concentrating solar power plants, Applied Thermal Engineering, 138, 409-416. The process of thermal energy storage in the 507 thermocline tank keeps the STP plants in operation, the heat transfer process inside this tank during the charging/discharging cycles is of fundamental importance and will be studied in detail in this research.", "mime": "application/pdf"}, {"id": "cet-11027", "words": "4175", "extension": ".pdf", "flesch": "62", "author": "Zhang, Lingwei; Wang, Yufei; Feng, Xiao", "title": "Design and Operation Optimization of Industrial Waste Heat Recovery for District Heating and Cooling", "date": "2020", "keywords": "cooling; grade; heat; temperature; waste; waste heat; water", "summary": "In this study, a multi-period mathematical model has been established for the waste heat recovery, in which hot water is the intermediate fluid, and waste heat can be utilized in the entire year by integrating with DHC systems. Kapil et al. (2011) proposed a method for identifying the quality and quantity of low-grade waste heat that can be recycled in the plant, and assessed the economic benefits of integrating waste heat into the district heating (DH) system.", "mime": "application/pdf"}, {"id": "cet-11028", "words": "3749", "extension": ".pdf", "flesch": "53", "author": "Wang, Jiannan; Cui, Mei; Su, Rongxin; Liu, Zhaohui; Zhang, Jinghui; Huang, Renliang", "title": "Preparation of Modified Calcium Bentonite for the Prevention of Heavy Metal Ion Transport in Groundwater", "date": "2020", "keywords": "bentonite; cd2; cmc; ions; metal; ni2; shmp@cb", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 81, 2020 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Qiuwang Wang, Min Zeng, Panos Seferlis, Ting Ma, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2020, AIDIC Servizi S.r.l. ISBN 978-88-95608-79-2; ISSN 2283-9216 Preparation of Modified Calcium Bentonite for the Prevention of Heavy Metal Ion Transport in Groundwater Jiannan Wanga, Mei Cuib, Rongxin Sub, Zhaohui Liuc, Jinghui Zhangc, Renliang Huanga,* aSchool of Environmental Science and Engineering, Tianjin University, Tianjin 300072, P.R. China bSchool of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, P.R. China cSino New REME Environmental Technology Co. Ltd, Tianjin 300304, P.R. China tjuhrl@tju.edu.cn Vertical engineered barriers are often used to prevent the transport of heavy metal ions in groundwater, and barrier layers are the key to pollution control. Vertical engineered barriers are a promising technology for preventing the transport of heavy metal ions in groundwater and bentonite is widely used as the barrier layer, such as geosynthetic clay liner (GCL)", "mime": "application/pdf"}, {"id": "cet-11029", "words": "3151", "extension": ".pdf", "flesch": "53", "author": "Elfeky, Karem Elsayed; Mohammed, Abubakar Gambo; Wang, Qiuwang", "title": "Investigate the Thermal Performance of Thermocline Tank for Hybrid Solar Tower Power Plants", "date": "2020", "keywords": "energy; heat; htf; spheres; tank; temperature; tes; thermocline", "summary": "Li B., Ju F., 2018, Thermal stability of granite for high temperature thermal energy storage in concentrating solar power plants, Applied Thermal Engineering, 138, 409-416. Zanganeh G., Khanna R., Walser C., Pedretti A., Haselbacher A., Steinfeld A., 2015, Experimental and numerical investigation of combined sensible\u2013latent heat for thermal energy storage at 575 \u00b0C and above, Solar Energy, 114, 77-90.", "mime": "application/pdf"}, {"id": "cet-11030", "words": "4216", "extension": ".pdf", "flesch": "41", "author": "Hu, Lei; Lu, Lin; Wang, Qiuwang", "title": "Shape-stabilized Phase Change Materials Based on Carbon Matrix for Thermal Performance Enhancement: A Review", "date": "2020", "keywords": "carbon; change; conductivity; conversion; cpcm; energy; et al; graphene; heat; leakage; materials; paraffin; phase; storage", "summary": "Renewable energy offers a good solution to this issue and has been attracting extensive attention during the past decades, including solar (Munkhchuluun et al., 2020), biomass (Mohebbi et al., 2020), wind (Li et al., 2020), tidal energy (Gaurier et al., 2020), geothermal power (Gil et al., 2020), water (Comino et al., 2020), nuclear energy (Batchelder, 2020), and hybrid power systems (Li et al., 2020). However, renewable energy cannot be collected at any time and any region needed, which is highly dependent on the climate condition (Li et al., 2019).", "mime": "application/pdf"}, {"id": "cet-11031", "words": "4001", "extension": ".pdf", "flesch": "48", "author": "Suwansawat, Pimpawan; Jitkarnka, Sirirat", "title": "Conversion of Bio-Ethanol to 1,3-Butadiene over Grafted ZrO2/FeMgAl-Layered Double Oxide Catalyst", "date": "2020", "keywords": "acetaldehyde; acid; base; butadiene; catalyst; conversion; ethanol; femgal; ldo; zro2", "summary": "2.2 Catalyst characterization The crystallinity of catalysts was investigated using Rikagu SmartLab X-Ray Diffractometer. Based on several articles, ZrO2 catalysts provided a good activity on the acetaldehyde condensation reaction.", "mime": "application/pdf"}, {"id": "cet-11032", "words": "3156", "extension": ".pdf", "flesch": "52", "author": "Ji, Cheng; Zhu, Xuebing; Ma, Fangyuan; Wang, Jingde; Sun, Wei ", "title": "Fault Diagnosis Algorithm of Chemical Process Based on Information Entropy", "date": "2020", "keywords": "contribution; diagnosis; fault; method; model; process; root; variables", "summary": "The propagation path of most process faults is identified, which is well matched with the fault description, indicating that the proposed method has a good performance on diagnosing process faults. Then in PCA based method T2 statistic, SPE statistic, and their control limits are utilized to detect process faults.", "mime": "application/pdf"}, {"id": "cet-11033", "words": "3625", "extension": ".pdf", "flesch": "49", "author": "Zhao, Wenying; Xia, Li ; Cao, Xiaorong; Bi, Rongshan; Xiang, Shuguang", "title": "A Modified Alpha Function for Peng-Robinson Cubic Equation of State", "date": "2020", "keywords": "alpha; alpha function; compounds; eos; function", "summary": "Figure 1: The representative and proposed alpha function and their derivatives for n-butanol in the reduced temperature region from 0.4 to 6. (a) alpha function; (b) the first-order derivation of alpha function; (c) the second-order derivation of alpha function; (d) the third-order derivation of alpha function. Guennec et al. (2016) concluded and revised the constraints of consistency test of alpha function.", "mime": "application/pdf"}, {"id": "cet-11156", "words": "3317", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11156", "date": null, "keywords": "chromium; cr(vi; effect; figure; hexavalent; iron; nzvi@pga; removal; zhang", "summary": "Figure 4: Cr(VI) (40 mg/L) removal by nZVI@PGA at different initial pH (T=25 \u00b0C) 3.5 Effect of initial Cr(VI) concentration on the removal of Cr(VI) by nZVI@PGA Figure 5a shows the effect of initial Cr(VI) concentration for the removal of Cr(VI) at pH=3. nZVI owns better adsorption and reduction effect in the field of hexavalent chromium removal from wastewater or contaminated soil (Mouhamadou et al., 2015).", "mime": "application/pdf"}, {"id": "cet-11157", "words": "3176", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-11157", "date": null, "keywords": "aircraft; blade; design; figure; method; performance; propeller; thrust", "summary": "The numbers of propeller blades, propeller installation method and propeller diameter are selected according to the working conditions and the characteristic of the engine. Figure 5: Optimization flow chart As shown in Figure 6, contrasting the original and optimized chord length of propeller blades, the viscosity effect and the drag of blade element let the chord length distribution move inward, the chord length in the middle area increases, and the plane shape of the blades become full.", "mime": "application/pdf"}, {"id": "cet-11158", "words": "2963", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-11158", "date": null, "keywords": "furnace; heat; heat transfer; swirl; temperature; transfer; tube; wall", "summary": "Conclusions Numerical simulations have been performed to investigate on coupling process of supercritical heat transfer and boiler combustion. Numerical investigation of cooling heat transfer to supercritical CO2 in a horizontal circular tube.", "mime": "application/pdf"}, {"id": "cet-11159", "words": "3191", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-11159", "date": null, "keywords": "chloride; concentration; crystals; gas; inhibitor; salt; sodium; water", "summary": "The results showed that its addition changed the morphological structure of the growth of sodium chloride crystals, and significantly inhibited the recrystallization process of sodium chloride in the formation water of Daji 1 - 7 gas well. The concentrations of chloride ions in the solutions and the structure of sodium chloride crystals in the presence or absence of the inhibitor were determined through ion chromatography and scanning electron microscopy (SEM, MAIA3LMH, TESCAN, Czech).", "mime": "application/pdf"}, {"id": "cet-11160", "words": "3152", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-11160", "date": null, "keywords": "ammonia; borane; dehydrogenation; energy; mab; path", "summary": "The energy barrier of MAB dehydrogenation by N-H ... -10 -5 0 5 0.0 0.2 0.4 KAB N-s N-p D en si ty o f S ta te /H a B-s B-p H(N)-s H(N)-p H(B)-s H(B)-p Energy/eV K-s K-p K-d Figure 2: AB, MAB (M = Li, Na, K) total state density and local state density diagram Figure 3: Schematic diagram of ammonia borane pyrolysis dehydrogenation process and the molecular structure of the reactants, transition states and products at various steps.", "mime": "application/pdf"}, {"id": "cet-11161", "words": "4961", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-11161", "date": null, "keywords": "chemical; engineering; exercises; faculty; laboratory; learning; students; study; work; year", "summary": "For many years, the Faculty has been carrying out student projects which are supported by the European Social Fund. This was mainly due to a large proportion of the experimental laboratory work done by students, which could reach up to half of all contact hours.", "mime": "application/pdf"}, {"id": "cet-11162", "words": "3348", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11162", "date": null, "keywords": "angle; blade; power; shwt; tip; turbine; wind; winglet", "summary": "Future work based on this outcome should address the other crucial winglet variables, such as winglet height and sweep, in order to conclude about the possible similarity between SHWT and large wind turbines winglet design. Gupta A., Amano R.S., CFD analysis of wind turbine blade with winglets, 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 12- 15, 2012, Chicago, IL, USA, American Society of Mechanical Engineers Digital Collection, 843-849.", "mime": "application/pdf"}, {"id": "cet-11163", "words": "3736", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11163", "date": null, "keywords": "collector; demand; energy; heat; integration; process; storage; system; temperature; thermal", "summary": "Solar energy is the radiant light and heat from the sun that is harnessed using a range of ever-changing technologies such as solar photovoltaics, solar thermal energy, and concentrating solar power (CSP). Solar thermal energy uses the sun's energy to heat up a fluid to a higher temperature, then the heated fluid moves and heats water creating steam.", "mime": "application/pdf"}, {"id": "cet-11164", "words": "2826", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-11164", "date": null, "keywords": "efficiency; figure; fin; fins; heat; mesh", "summary": "Relative differences are smaller than 0.1 % for a mesh element size ranging from 3\u00d710-4 m to 5\u00d710-4 m (meshes ranging from 1,333 to 48,000 elements for straight fin and from 1,736 to 62,512 elements for circular fin). Numerical methods can be used to determine fin temperature distribution or fin efficiency for both simple and complex fin geometries (Taler and Taler, 2014).", "mime": "application/pdf"}, {"id": "cet-11165", "words": "3144", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-11165", "date": null, "keywords": "ceramic; materials; production; slag; strength; temperature", "summary": "However, Sadenova et al. (2019) proposed a technology for involving metallurgical slag in the synthesis of ceramic materials for environmental catalysis, based on powder metallurgy methods. It is necessary to establish the laws of the genesis of ceramic materials containing metallurgical slag depending on the composition and processing conditions.", "mime": "application/pdf"}, {"id": "cet-11166", "words": "3472", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11166", "date": null, "keywords": "analysis; cement; cycle; energy; life; output; process; production; total", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 81, 2020 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Qiuwang Wang, Min Zeng, Panos Seferlis, Ting Ma, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2020, AIDIC Servizi S.r.l. ISBN 978-88-95608-79-2; ISSN 2283-9216 An Input-Output Approach for Environmental Life Cycle Assessment of Cement Production Parinya Khongproma, Sirirak Champanoib, Unchalee Suwanmaneeb,* aDepartment of Industrial Chemistry, Faculty of Applied Science, King Mongkut\u2019s University of Technology North Bangkok Bangkok 10800, Thailand bDepartment of Chemical Engineering, Faculty of Engineering, Srinakharinwirot University, Nakhon-Nayok 12110 Thailand unchalee@g.swu.ac.th To evaluate the energy consumption and global warming impact of cement production at macro level, this work provided the 10 sectors Economic Input-Output Life Cycle Assessment (EIO-LCA) based on 1990 - 2010 Thailand national economic data. In comparison with the Process LCA, the main contributions of energy used (84 %) and GHG emissions (91 %) of cement production were from the limestone calcination in clinker production and fossil fuels used.", "mime": "application/pdf"}, {"id": "cet-11167", "words": "3826", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-11167", "date": null, "keywords": "air; cavity; curtain; glass; heat; nighttime; pcm; transfer; wall", "summary": "In order to analyze the cause, convective heat transfer of the circulated air cavity is obtained, as shown in Figure 10. Convective heat transfer of E Low-E increases when the curtain is closed, while decreases for I Low-E.", "mime": "application/pdf"}, {"id": "cet-11168", "words": "3570", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-11168", "date": null, "keywords": "energy; membrane; pressure; process; solution; water", "summary": "Recent advances on membrane processes for the concentration of fruit juices: a review, Journal of Food Engineering, 63, 303-324. Figure 3: Water flux and the solute flux as a function of ionic liquid concentration Figure 3 illustrates the change of the water and solute transport across the membrane as a function of the solute concentration in the draw solution.", "mime": "application/pdf"}, {"id": "cet-11170", "words": "3874", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-11170", "date": null, "keywords": "analysis; development; energy; et al; factors; management; opportunities; planning; research; strategy; swot", "summary": "Krog L., Sperling K., 2019, A comprehensive framework for strategic energy planning based on Danish and international insights, Energy Strategy Reviews, 24, 83-93. Economic factors are aspects that should be considered in the development of strategic energy management.", "mime": "application/pdf"}, {"id": "cet-11345", "words": "3703", "extension": ".htm", "flesch": "51", "author": "Song, Ying Thong; Mustaffa, Azizul Azri", "title": "Natural Deep Eutectic Solvent (NADES) Design Framework for Extraction of Polyphenols from Jackfruit", "date": "2021", "keywords": "acid; candidates; extraction; jackfruit; nades; polyphenols; screening; target", "summary": "2.3 Stage 3: Method of screening NADES candidates were reduce significantly based on the selected target properties in this stage. NADES candidates were first screened based on the constraints of target properties for NADES and followed by second screened based on the solubility of polyphenols in NADES.", "mime": "application/pdf"}, {"id": "cet-11346", "words": "3254", "extension": ".pdf", "flesch": "47", "author": "Sri, Haryati; Bustan, Djoni; Syarif, Nirwan; Lee, Chew Tin", "title": "Performance of Carbon Nanosheet Electrode from Aquatic Wood Waste in Supercapacitor", "date": "2021", "keywords": "caco3; capacitance; carbon; charging; cycle; discharging; electrolyte; rate; supercapacitor", "summary": "Novel supercapacitors were fabricated using carbon nanosheet electrode. There is only a slight decrease in the first cycle, as shown by the increased slope of 20 % CaCO3 of supercapacitor.", "mime": "application/pdf"}, {"id": "cet-11347", "words": "3591", "extension": ".pdf", "flesch": "46", "author": "Syarif, Nirwan ; Rohendi, Dedi; Sri, Haryati; Lee, Chew Tin; Wong, Wai Yin; Sudarsono, Wulandhari ; Sumboja, Afriyanti", "title": "Gelam Tree-Derived Carbon Nanosheets as Thick and Free-Standing Electrode for Supercapacitor", "date": "2021", "keywords": "ammonium; capacitance; carbon; carbon nanosheet; cyanate; electrode; electrolyte; graphite; nanosheet; ratio", "summary": "3. Result and discussion 3.1 Material characterization Two types of carbon nanosheet -based electrodes were prepared in this study by varying the weight ratio of carbon nanosheet to graphite in the electrode (ratio 3:7 and 7:3). Sumboja A., Tefashe U.M., Wittstock G., Lee P.S., 2012, Monitoring electroactive ions at manganese dioxide pseudocapacitive electrodes with scanning electrochemical microscope for supercapacitor electrodes, Journal of Power Sources, 207, 205\u2013211.", "mime": "application/pdf"}, {"id": "cet-11348", "words": "4400", "extension": ".pdf", "flesch": "52", "author": "Ramli, Siti Aishah; Othman, Norhayani; Abu Bakar, Aznizam; Hassan, Azman", "title": "Plasticizing Effects of Epoxidized Palm Oil on Mechanical and Thermal Properties of Poly(3-hydroxybutyrate-co-hydroxyvalerate)/Poly(caprolactone) Blends", "date": "2021", "keywords": "blends; elongation; epo; impact; melting; pcl; phbv; polymer; properties; strength; tensile", "summary": "DSC of PHBV/PCL blends clearly show the immiscibility of these two biodegradable polymers, as indicated by two individual melting peaks located at typical temperature value of each melting point; one at about 170 \u00b0C attributable to PHBV and the other melt peak located at about 60 \u00b0C which is related to PCL melting temperature. The low molecular weight PCL helps in improving the mechanical properties of polymer blends (Jenkins et al., 2007).", "mime": "application/pdf"}, {"id": "cet-11349", "words": "2706", "extension": ".pdf", "flesch": "41", "author": "Naderipour, Amirreza; Abdul-Malek, Zulkurnain; Nasri, Shohreh; Arabi Nowdeh, Saber; Kamyab, Hesam; Chelliapan, Shreeshivadasan; Mustafa, Mohd Wazir Bin; Mohd Zin, Abdullah Asuhaimi", "title": "Novel Designing Framework of Stand-alone and Grid-connected Hybrid Photovoltaic/Wind/Battery Renewable Energy System Considering Reliability, Cost and Emission Indices", "date": "2021", "keywords": "cost; energy; hybrid; load; reliability; system; wind; \ud835\udc49\ud835\udc49\ud835\udc49\ud835\udc49", "summary": "Environmental emission produced in the design and optimization of hybrid energy systems must be considered as an important factor (Jafar-Nowdeh et al., 2020). Hybrid energy system 2.1 Page layout system configuration The HPV/WT/BA sustainable energy system consists of PV, WT, battery (BA) and inverter to convert DC power to AC power according to Figure 1.", "mime": "application/pdf"}, {"id": "cet-11350", "words": "3226", "extension": ".pdf", "flesch": "43", "author": "Razak, Nurul Hanim; Hashim, Haslenda; Yunus, Nor Alafiza; Kleme\u0161, Jir\u00ed Jarom\u00edr ", "title": "Integrated GIS-AHP Optimization for Bioethanol from Oil Palm Biomass Supply Chain Network Design", "date": "2021", "keywords": "bioethanol; biomass; biorefinery; chain; cost; design; network; oil; opf; palm; supply", "summary": "1. Introduction Second-generation bioethanol, an advanced biofuel can be produced from renewable biologic wastes such as oil palm biomass. Bioethanol from oil palm biomass is one of the oxygenates blended to diesel to limit the diesel drawbacks such as mitigating emissions of hazardous materials including nitrogen dioxide (NOx), sulphur oxide (SOx), hydrocarbons (HC) containing aromatics likes pyrene, toluene, and benzene, carbon monoxide (CO), and particulate matter (PM) (Yilmaz et al., 2018).", "mime": "application/pdf"}, {"id": "cet-11351", "words": "3848", "extension": ".pdf", "flesch": "48", "author": "Jensani, Muhammad Khairul Nizam; Sadikin, Aziatul Niza; Ngadi, Norzita; Azman, Muhammad Fakhrullah; Ab Muis, Zarina; Asli, Umi Aisah", "title": "Anaerobic Co-Digestion of Food Waste with Crude Glycerol for Biogas Production", "date": "2021", "keywords": "anaerobic; biogas; digestion; food; glycerol; production; waste", "summary": "Rafidah S., Newati W., 2016, Anaerobic Co-digestion of Food Waste and Palm Oil Mill Effluent for Phosphorus recovery: Effect of Reduction of Total Solids, Volatile Solids and Cations, Transactions on Science and Technology, 3(1-2), 265-270. aziatulniza@utm.my Biogas production from anaerobic co-digestion of food waste and crude glycerol was investigated in this study.", "mime": "application/pdf"}, {"id": "cet-11352", "words": "3826", "extension": ".pdf", "flesch": "59", "author": "Galluzzi, Armando; Murariu, Marius; Raquez, Jean-Marie; Dubois, Philippe; Polichetti, Massimiliano", "title": "Effect of Magnetite Nanoparticles Content on the Magnetic Properties of Polylactide and Polystyrene Composites", "date": "2021", "keywords": "et al; field; magnetic; nps; pla; properties; samples; temperature", "summary": "The effect of magnetite nanoparticles (NPs) content on the magnetic properties of polylactide (PLA) and polystyrene (PS) matrix has been investigated by means of DC magnetization measurements as a function of temperature (T) and magnetic field (H). Conclusions The DC magnetic properties of PLA and PS matrices filled with different percentages of Fe3O4 NPs have been studied as a function of temperature and magnetic field.", "mime": "application/pdf"}, {"id": "cet-11353", "words": "2995", "extension": ".pdf", "flesch": "47", "author": "Ichipi, Emmanuel; Tichapondwa, Shepherd; Chirwa, Evans", "title": "Facile Synthesis and Characterisation of Nanosized Zno Modified with Ag2s for Visible-light Induced Phenol Degradation", "date": "2021", "keywords": "ag2s; catalyst; degradation; light; phenol; water; zno", "summary": "(a) (b) 9 Figure 2: XRD pattern of ZnO and Ag2S/ZnO catalysts synthesised by sol-gel method SEM and TEM images Some quantities of ZnO precursor, pure ZnO, and Ag2S/ZnO powders were taken to SEM and TEM to capture their shapes and morphologies. Figures 3(d), (e), and (f) show TEM images of precursor ZnO, pure ZnO, and Ag2S/ZnO particles like flat nanoplates and sheets.", "mime": "application/pdf"}, {"id": "cet-11354", "words": "2793", "extension": ".pdf", "flesch": "49", "author": "Dadi, Rania; Kerignard, Eloise; Traore, Mamadou; Mielcarek, Christine; Kanaev, Andrei; Azouani, Rabah", "title": "Evaluation of Antibacterial Efficiency of Zinc Oxid Thin Films Nanoparticles Against Nosocomial Bacterial Strains", "date": "2021", "keywords": "figure; films; layers; nanoparticles; sem; thin; zinc; zno", "summary": "Conclusions In this study, we developed elaboration of nanodeposits ZnO thin layer with sol gel method on glass substrates, using colloidal solutions of nanoparticles at concentration of 1.5 mol/L. This research work focuses on the synthesis and characterization of thin layers of functional metal oxides based on ZnO nanoparticles for applications to surfaces and coatings on various supports (paints, coatings \u2026).", "mime": "application/pdf"}, {"id": "cet-11355", "words": "3545", "extension": ".pdf", "flesch": "50", "author": "Sanchez Mendez, Miguel; Lemarchand, Alex; Traore, Mamadou; Ben Amar, Mounir; Perruchot, Christian; Nikravech, Mehrdad; Kanaev, Andrei", "title": "Preparation and Photocatalytic Activity of Coatings Based on Size-selective V-tio2 Nanoparticles", "date": "2021", "keywords": "beads; glass; mol%; nanoparticles; reactor; tio2; vanadium", "summary": "The kinetics of MB decomposition under UVA illumination in the empty reactor and that filled with uncoated clean and coated glass beads with TiO2 nanoparticles is presented in Figure 5. Moreover, unaccounted contamination of V-TiO2 photocatalyst by the amorphous material due to the uncomplete crystallisation can reduce the activity (Ohtani et al., 1997). 0 30 60 90 120 150 180 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 Empty reactor Uncoated glass beads TiO2-coated glass beads - - second use C / C 0 Time, min Figure 5: Kinetics of MB decomposition in the photocatalytic reactor: empty and filled with uncoated and coated glass beads with TiO2 nanoparticles (1st and 2nd runs). 0 30 60 90 120 150 180 0,8 0,9 1 2 mol% 5 mol% 7 mol% 10 mol% 20 mol% C / C 0 Time, min Figure 6: Kinetics of MB decomposition in photocatalytic reactor filled with V-TiO2-coated glass beads.", "mime": "application/pdf"}, {"id": "cet-11356", "words": "3737", "extension": ".pdf", "flesch": "46", "author": "Passalacqua, Rosalba; Abate, Salvatore; Perathoner, Siglinda; Centi, Gabriele", "title": "Improved Nanocomposite Photoanodes by Controlled Deposition of G-c3n4 on Titania Nanotube Ordered Films", "date": "2021", "keywords": "c3n4; figure; melamine; mol; samples; tint; tio2; urea", "summary": "The photoelectrocatalytic properties of TiO2 nanotube ordered films (TiNT) could be enhanced by decorating them with graphitic-C3N4. Table 1: Investigated samples and their characteristics of preparation Sample name Chemical components AO parameters g-C3N4 precursor TiNT TiO2/Ti 50 V; 1h --- TiNTM6 g-C3N4-TiO2/Ti 50 V; 1h Melamine 6\u00b710-3 mol TiNTM12 g-C3N4-TiO2/Ti 50 V; 1h Melamine 12\u00b710-3 mol TiNTM18 g-C3N4-TiO2/Ti 50 V; 1h", "mime": "application/pdf"}, {"id": "cet-11357", "words": "3207", "extension": ".pdf", "flesch": "48", "author": "Wang, Cong; Ning, Yuping; Song, Ping; Wu, Yongxin; Xue, Yafei; Liu, Yu; Bousquet, Angelique; Tomasella, Eric", "title": "Solar Selective Absorbing Coatings Obtined by Physical Vapor D\u00e9position : Overview of Different Strategies for Increasing Performance and Efficiency of Photothermal Conversion", "date": "2021", "keywords": "absorbing; coating; energy; figure; layer; temperature", "summary": "The typical coating structure from surface to substrate consists of an anti-reflection layer composed of a transparent ceramic material that enhances solar transmission, a low metal volume fraction (LMVF) cermet solar absorption layer, a high metal volume fraction (HMVF) cermet solar absorption layer, which forms interference absorption bilayer and an IR- reflective metallic layer that decreases the IR emission. Although the use of solar energy for electricity production using photovoltaic cells is well known today, the use of other technologies such as Concentrating Solar Power (CSP) is under development and could produce 25% of global electricity by 2050.", "mime": "application/pdf"}, {"id": "cet-11480", "words": "3645", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-11480", "date": null, "keywords": "analysis; attack; database; figure; incidents; mode; oil&gas; operations; sector; security; threat", "summary": "Geographically, the Gulf of Guinea (Africa) and the Strait of Malacca (Asia) resulted the most affected areas by security attacks due to the strategic location for international maritime shipping routes and the presence of a high number of offshore Oil&Gas operations. Although historical evidence of major events triggered by security attacks to offshore Oil&Gas installations was recorded, the majority of final scenarios resulted in non- industrial impacts (labelled as \u201cother\u201d, such as theft of personal belongings of workers, documents, equipment, kidnapped workers for ransom, protests).", "mime": "application/pdf"}, {"id": "cet-11481", "words": "3258", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-11481", "date": null, "keywords": "ag2stm; carbon; claus; co2; h2s; process; production; syngas; technology", "summary": "Claus process is the most diffused, well-known and deeply studied process that allows recovering, at the same time, sulphur and thermal energy from acid gases (Taylor et al. 2017). In the chamber, SO2 net rate is almost zero in the AG2STM, while, in Claus process, it was produced abundantly, as it can be seen by the comparable consumption rate of H2S and SO2.", "mime": "application/pdf"}, {"id": "cet-11482", "words": "3181", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-11482", "date": null, "keywords": "adsorbent; adsorption; amoxicillin; amx; graphene; removal", "summary": "This implies that the rate of AMX adsorption onto graphene-OH was affected mainly by the availability of active adsorption sites on the adsorbent rather than the concentration of the AMX in the solution (Moussavi et al., 2013). = 1 + (3) = (4) The equilibrium data for AMX adsorption was fitted with both the Langmuir and Freundlich isotherms (Figure 3b), and non-linear regression analysis determines the calculated parameters (Table 2).", "mime": "application/pdf"}, {"id": "cet-11483", "words": "3730", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11483", "date": null, "keywords": "analysis; atex; dust; method; node; plant; stearate; table; zones", "summary": "From the analysis concerning accidents involving explosive dusts in the U.S.A., the trend over the period 2016-2019 have shown that 30 dust explosions per year occur (\u201cCombustible Dust Incident Reporting) almost constantly. Once explosive dusts have been characterized, the ATEX directive suggests to identify all the possible ignition sources and the so-called ATEX Zones, that represent the areas of the plant where an explosive atmosphere can be generated (that is, a dust cloud above the LEL).", "mime": "application/pdf"}, {"id": "cet-11484", "words": "3150", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-11484", "date": null, "keywords": "dispersion; dust; flow; vessel", "summary": "346 Figure 4: DPM concentration as computed in the centre of the 1 m3 vessel as a function of time for dust dispersion at d=200 \u03bcm (black line) and d=400 \u03bcm (red line) C=100 g/m3 Figure 5: Computed maps of DPM concentration at 600 ms for dust dispersion at d=200 \u03bcm (left) and d=400 \u03bcm (right), (x-z) plane Figure 6: Turbulent kinetic energy (m2/s2) profiles on a cut line (indicated on the left side) for 1 m3 vessel (a) and 20 L vessel (b): dust-free air (black line), dust dispersions at d=200 \u03bcm (red line) and d=400 \u03bcm (blue line) 347 4. Model description Model details of dust dispersion in the 1 m3 vessel equipped with the perforated annular nozzle are given elsewhere (Portarapillo et al., 2020b).", "mime": "application/pdf"}, {"id": "cet-11485", "words": "3188", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11485", "date": null, "keywords": "adsorbent; adsorption; carbon; cnt; dye; dyes; nanotubes; removal; water", "summary": "References Abdi, J., Vossoughi, M., Mahmoodi, N.M., Alemzadeh, I., 2017, Synthesis of metal-organic framework hybrid nanocomposites based on GO and CNT with high adsorption capacity for dye removal. Dai, L., Zhu, W., He, L., Tan, F., Zhu, N., Zhou, Q., He, M., Hu, G., 2018, Calcium-rich biochar from crab shell: An unexpected super adsorbent for dye removal.", "mime": "application/pdf"}, {"id": "cet-11486", "words": "3192", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-11486", "date": null, "keywords": "carbon; co2; experiments; flue; gas; growth; organics; wastewater", "summary": "This study investigated enhancing the potential of low carbon wastewaters with flue gas and mapping the interaction between the organic carbon present in the wastewater and the carbon dioxide introduced with the flue gas, with the aim of achieving optimal biomass, fatty acid methyl esters (FAME) and EPS yields. There may be competing metabolic mechanisms at play, where the experiments with high carbon input ratios did not use only the EPS that was produced, but also the organics present in the wastewater as a substrate.", "mime": "application/pdf"}, {"id": "cet-11487", "words": "4588", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-11487", "date": null, "keywords": "capabilities; data; decision; key; management; managers; objectives; organizations; process; safety", "summary": "i. Availability: Comparatively to quality management where conformity to standards can be assessed using hundreds if not thousands of products, process safety managers deal with an extremely reduced set of events. This vision has since then been widely shared in a large set of professional guidelines (EPSC, 2011) (CEFIC, 2011) and a safety science special issue on process safety leading and lagging indicators has extensively discussed the safety measurement issue without questioning this assertion (safety science special issue 47 (4), 2009).", "mime": "application/pdf"}, {"id": "cet-11488", "words": "3258", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-11488", "date": null, "keywords": "cloud; concentration; dust; image; luminance; speed; time; tube; video", "summary": "This work has to be regarded as a preliminary approach to the investigation of dust cloud dynamics within the Hartman tube through high-speed video post-processing and, with further verification tests (different operative conditions and/or type of dust), could constitute a relatively quick procedure to study turbulence structures and the adequate time scale to operate the MIE test. It is evident that the second contains a greater quantity of information: in particular, the areas where there are variations in brightness (therefore in dust concentration) are highlighted.", "mime": "application/pdf"}, {"id": "cet-1151", "words": "4081", "extension": ".htm", "flesch": "43", "author": "Liu, Yonghe; Liu, Yu", "title": "The Effective Application and Research of Foundation Reinforcement in Civil Engineering Construction ", "date": "2017", "keywords": "cement; engineering; foundation; increase; loess; method; soil; strain; strength; stress", "summary": "Conclusions In this paper, the theoretical study on the bearing capacity and settlement of loess foundation treated by cement soil pile composite foundation is presented. The cement soil pile composite foundation reinforcement of loess foundation, the upper structure load of single pile composite foundation and the settlement of the basic research contents include pile stress distribution, pile-soil stress ratio, pile and soil between piles and the composite foundation settlement of substratum settlement.", "mime": "application/pdf"}, {"id": "cet-1152", "words": "3803", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-1152", "date": null, "keywords": "analysis; building; design; earthquake; floor; layer; performance; shear; structure; wall", "summary": "1 under the rare earthquake in the performance point, the direction of the maximum elastic-plastic displacement angle between layers were in accordance with the Regulations provisions of article 4.6.5 technology of concrete structures in high-rise buildings, shear wall structure layer is less than the elastic-plastic displacement angle limit of 1/120; 2 in the loading structure at the beginning of a beam damage after that, there are very few beam plastic hinge, the wall in the performance point when the damage is mainly at the bottom of the tension side of the small wall had a small area of the damage, but there is no continuous development of the situation; 3 directions of nappe, bending damage at the bottom of the shear wall around the outer layer standard stress, not shear failure. To occur through the recent earthquake and harm that, with the development of economy and the development of new materials and new technology to further strengthen the earthquake fortification measures, reduce the failure and collapse of building structures caused by the earthquake, significantly reduced so the number of casualties caused by.", "mime": "application/pdf"}, {"id": "cet-1153", "words": "3706", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-1153", "date": null, "keywords": "asphalt; performance; rate; shear; shear viscosity; temperature; test; viscosity", "summary": "The zero shear viscosity of high viscosity asphalt and asphalt Newton area corresponding to the first uniform shear rate range from the pavement, viscous characteristics of 60 \u00b0C can effectively characterize the zero shear viscosity of high viscosity modified asphalt in pavement structure, propose this index as the high viscosity modified asphalt viscosity evaluation key index. 2.2 Experimental comparison of zero shear viscosity and capillary viscosity of asphalt at high temperature Two kinds of high viscosity modified asphalt viscosity of s 60 \u00b0C are indeed up to 1*105Pa.s.", "mime": "application/pdf"}, {"id": "cet-1154", "words": "3014", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-1154", "date": null, "keywords": "ceramic; engineering; health; materials; monitoring; piezoelectric; sensor; signal; structure", "summary": "Next, wipe structure paste position and piezoelectric ceramic sensor and structure contact surface dust, dirt with acetone. In order to test the performance of the piezoelectric ceramic sensor after packaging and compare the performance of piezoelectric ceramic sensor of different thickness and different size, piezoelectric ceramics are used in this paper.", "mime": "application/pdf"}, {"id": "cet-1155", "words": "3106", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-1155", "date": null, "keywords": "block; concrete; control; cracks; foundation; mortar; structure; wall", "summary": "In this way, the block will produce uneven stress, making the tensile stress within the block increased, and then easily lead to wall cracks. From the corner of the wall from the buried length or the intersection of counting, each side of must not be less than 600mm. 4.2.3 Improve the quality of gray seam The quality of masonry wall is directly affected by the quality of gray joint, which is controlled by the fullness and thickness of mortar.", "mime": "application/pdf"}, {"id": "cet-1156", "words": "3057", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-1156", "date": null, "keywords": "cement; coating; healing; material; pool; self; swimming; waterproof", "summary": "Cement-based permeable crystalline waterproof coating is a kind of cement concrete waterproof material, which contains the chemical active substances as water a carrier to penetrate into the concrete. It can be used as the base material of polymer cement waterproof coating.", "mime": "application/pdf"}, {"id": "cet-1157", "words": "2898", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-1157", "date": null, "keywords": "chemical; doi; fermentation; figure; initial; penicillin; process; production; simulation", "summary": "We mainly use the flow simulation software UniSim Design R400 to study the penicillin fermentation process, and draw the following conclusions: (1) We propose using the gravitation search algorithm to find the optimal parameters for the model and obtain the optimal kinetic equations for penicillin fermentation; (2) We establish the initialization module, supplemented medium module and fermentation tank module for the penicillin fermentation process, complete the simulated operation of penicillin fermentation and validate the feasibility of the process simulation technology in fermentation processes. Zlateva P., Denchev D., Simeonov I., Kaimaktchiev A., 2014, Mathematical modelling and simulation of fermentation process for citric acid production.", "mime": "application/pdf"}, {"id": "cet-1158", "words": "2763", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-1158", "date": null, "keywords": "absorption; absorption solution; co2; gas; mea; process; rate; solution", "summary": "100 120 140 160 180 200 0.1 0.2 0.3 0.4 10% MEA 20% MEA 25% MEA 30% MEA absorption volume flow rate m3/h ab so rp tiv ity o f C O 2 Figure 6: The relationship between absorption solution volumetric flow rate and CO2 load The simulation results show that when the concentration of absorption solution is fixed, CO2 load in CO2-rich fluid will be increasingly smaller with the increase in absorption solution volumetric flow rate, and the CO2-rich solution will be farther and farther away from CO2-saturated state. 100 120 140 160 180 200 0.70 0.75 0.80 0.85 0.90 0.95 ab so rp tiv ity o f C O 2 absorption volume flow rate m3/h 10% MEA 20% MEA 30% MEA Figure 4: Effects of absorption solution volumetric flow rate on CO2 absorptivity 3.2.2 Effects of absorption solution temperature on CO2 absorptivity The MEA solutions with the mass fractions of respective 10%, 20% and 30% were used as the absorption solution to simulate the absorption process.", "mime": "application/pdf"}, {"id": "cet-1159", "words": "3447", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-1159", "date": null, "keywords": "control; dcs; energy; gas; lng; pressure; process; production; station; system", "summary": "Xu W.D., Zheng H.P., Lang X.M., Chen Y.J., Fan S.S., 2010, Recycling of natural gas pressure energy from high-pressure pipeline network. With the expansion of the liquefied natural gas market, the city's natural gas operators have also established their own natural gas liquefaction factory in natural gas station.", "mime": "application/pdf"}, {"id": "cet-1160", "words": "2789", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-1160", "date": null, "keywords": "algorithm; battery; hydride; metal; network; neural; nickel", "summary": "Artificial Intelligence Algorithm Yuhong Du Hebi Automotive Engineering Professional College, Hebi 458030, China muzi598@163.com With the development of the modern society, nickel metal hydride battery has been paid attention to by scholars and manufacturers. Nickel metal hydride battery is an ideal power source for hybrid electric vehicles due to its high specific energy, high specific power and zero pollution.", "mime": "application/pdf"}, {"id": "cet-1161", "words": "2796", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-1161", "date": null, "keywords": "algorithm; data; fusion; sensor; t t", "summary": "In the aspect of sensor data fusion technology, a hybrid fusion algorithm based on adaptive weighting algorithm and Calman filtering algorithm is proposed, which not only improves the monitoring accuracy, but also reduces the energy consumption. So, reducing the data transmission between sensor nodes becomes an effective way to reduce the energy consumption of sensor networks.", "mime": "application/pdf"}, {"id": "cet-1162", "words": "2702", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-1162", "date": null, "keywords": "algorithm; chemical; distribution; g g; optimization; particle; swarm", "summary": "The flow chart of particle swarm optimization algorithm is as follows. Figure 1: Flow chart of particle swarm optimization algorithm", "mime": "application/pdf"}, {"id": "cet-1163", "words": "2669", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-1163", "date": null, "keywords": "chemical; doi; engineering; gas; monitoring; network; production; sensor; system; transactions; wireless", "summary": "In this paper, in light of the toxic gas leaks in chemical production plant areas, we conduct dynamic monitoring on hazardous gases like methane and formaldehyde, select appropriate sensor chips and gas sensors, and complete the wireless sensor network in the self-organized form based on the wireless sensor zigbee protocol, and then achieve the information exchange between the wireless sensor network and PC through appropriate portals and design and implement a hazardous gas monitoring system. Conclusions We deploy a number of wireless sensor gas detection nodes in the complex chemical production area, and establish a hazardous gas monitoring system based on WSN through the ZigBee mode.", "mime": "application/pdf"}, {"id": "cet-11660", "words": "3113", "extension": ".pdf", "flesch": "49", "author": "Zanca, Claudio; Cordaro, Germana; Capuana, Elisa; Brucato, Valerio; Carfi Pavia, Francesco; La Carrubba, Vincenzo; Ghersi, Giulio; Inguanta, Rosalinda", "title": "Galvanic Deposition of Hydroxyapatite/chitosan/collagen Coatings on 304 Stainless Steel", "date": "2021", "keywords": "chemical; coatings; corrosion; deposition; galvanic; sbf", "summary": "Galvanic deposition is an alternative and valid way to fabricate bio-coatings with high biocompatibility and good anticorrosion properties. To deposit HA/CS/CL coating on metallic substrate, galvanic deposition was used that takes advantage by galvanic coupling between stainless steel and zinc, characterized by a different electrochemical redox potential.", "mime": "application/pdf"}, {"id": "cet-11661", "words": "3694", "extension": ".pdf", "flesch": "43", "author": "Giusi, Daniele; Tavella, Francesco; Miceli, Matteo; Ampelli, Claudio; Centi, Gabriele; Cosio, Daniele; Genovese, Chiara; Perathoner, Siglinda", "title": "Synergetic Electrocatalytic Effects of Cu2O-TiO2 Heterostructures in a Solar Driven PEC Device for CO2 Reduction to >C1 Chemicals", "date": "2021", "keywords": "acid; co2; cu2o; electrode; gdl; reduction; solar; tio2", "summary": "Conclusions This study has analysed the synthesis, characterization, and application of Cu2O/GDL and Cu2O-TiO2/GDL electrodes in the photo-electro-catalytic reduction of CO2 (in combination with TiO2 nanotube arrays as photoanode for water oxidation) in a compact-design solar-driven PEC cell without application of any external potential/current and without sacrificial agents. Specifically, the photoanode for water oxidation is made of TiO2 nanotube arrays prepared via controlled anodic oxidation, while Cu2O-TiO2 heterostructures, synthesised by ultra- sonicated assisted co-precipitation and then spray-coated over a carbon-based gas diffusion layer (GDL), are used as electrocathode materials for CO2 reduction.", "mime": "application/pdf"}, {"id": "cet-11662", "words": "3034", "extension": ".pdf", "flesch": "50", "author": "Moja, Mahlako; Chirwa, Evans M.N.; Tichapondwa, Shepherd", "title": "Visible Light Activated Photocatalytic Degradation of 2,4-dichlorophenol Using Silver Halide Photocatalysts", "date": "2021", "keywords": "2,4; agbr; agx; irradiation; light", "summary": "The XRD pattern of the Ag/AgBr catalyst shows the coexistence of cubic phase Ag and cubic phase AgBr (Wang et al., 2011). Ag phase can be characterized by the distinct peaks at a 2\u03b8 of 38.5\u00b0 and 78.5\u00b0 which are assigned to (111) and (311) planes, respectively.", "mime": "application/pdf"}, {"id": "cet-11663", "words": "3156", "extension": ".pdf", "flesch": "41", "author": "Sotgiu, Giovanni; Orsini, Monica; Porcelli, Francesco; De Santis, Serena; Petrucci, Elisabetta", "title": "Wettability of Micro and Nanostructured Surface of Titanium Based Electrodes: Influence of Chemical and Electrochemical Etching", "date": "2021", "keywords": "acid; chemical; etching; samples; surface; titanium; wettability", "summary": "This work investigates the effect of different surface treatments on the morphological properties, wettability, and electrochemical response of titanium samples, to improve their applicability and performance with particular reference to the biomedical field. References Battocchio, C., Concolato, S., De Santis, S. Fahlman, M., Iucci, G., Santi, M., Sotgiu, G., Orsini, M., 2019, Chitosan functionalization of titanium and Ti6Al4V alloy with chloroacetic T acid as linker agent, Materials Science & Engineering C, 99, 1133-1140 Becke, S., Merz R., Hasse H., Kopnarski, M.,2016, Solvent cleaning and wettability of technical steel and titanium surfaces, Adsorption Science and Technology, 34, 261-274.", "mime": "application/pdf"}, {"id": "cet-11664", "words": "3198", "extension": ".pdf", "flesch": "36", "author": "Ustolin, Federico; Hendrick, Patrick; Paltrinieri, Nicola", "title": "Development of Tools Enabling the Deployment and Management of a Multi-energy Renewable Energy Community with Hybrid Storage", "date": "2021", "keywords": "community; electricity; energy; hydrogen; production; project; risk; storage; system; tools", "summary": "Within the framework of the \u201cSmart Energy Systems\u201d ERA-Net (European Research Area Network), the recently funded \u201cH2 CoopStorage\u201d project responds to the challenges posed by the deployment of renewable energy production means, by improving local balancing, by reducing renewable intermittences and by intensifying the production of renewable energy. The H2CS project responds to the challenges posed by the deployment of renewable energy production means, by improving local balancing and by reducing renewable intermittences.", "mime": "application/pdf"}, {"id": "cet-11665", "words": "3587", "extension": ".pdf", "flesch": "45", "author": "Stepacheva, Antonina; Gavrilenko, Alexandra; Markova, Mariia; Monzharenko, Margarita; Yakubenok, Kseniya; Sidorov, Alexander; Matveeva, Valentina; Sulman, Mikhail", "title": "The Use of Supercritical Solvents in Polyaromatic Conversion", "date": "2021", "keywords": "catalyst; conversion; cracking; mn-100; oil; phase; solvent; surface; water", "summary": "Supercritical hydrocarbon solvents such as tetralin (Kim et al., 2018), hexane, and dodecane (Viet et al., 2012) can also serve as hydrogen donors. Viet T.T., Lee J.-H., Ryu J.W., Ahn I.-S., Lee C.-H., 2012, Hydrocracking of vacuum residue with activated carbon in supercritical hydrocarbon solvents, Fuel, 94, 556\u2013562. Yeletsky P.M., Reina T.R., Bulavchenko O.A., Saraev A.A., Gerasimov E.Yu., Zaikina O.O., Berm\u00fadez J.M., Arcelus-Arrillaga P., Yakovlev V.A., Millan M., 2019, Phenanthrene catalytic cracking in supercritical water: effect of the reaction medium on NiMo/SiO2 catalysts, Catalysis Today, 329, 197\u2013205. 1434", "mime": "application/pdf"}, {"id": "cet-11666", "words": "3480", "extension": ".pdf", "flesch": "41", "author": "Renda, Simona; Tommasino, Ferdinando; Palma, Vincenzo; Miccio, Michele; Okasha, Farouk", "title": "Design and Setup Activities for the Development of Methane Autothermal Reforming in a Jet Fountain Fluidized Bed Reactor", "date": "2021", "keywords": "bed; catalyst; kinetic; methane; reactor; reforming; temperature", "summary": "The technology, known as jetting fountain fluidized bed reactor, is particularly promising for the ATR reaction, as it is able to enhance the heat and mass transport phenomena. The reaction rates of methane steam reforming (SR) and CO water-gas shift (WGS) given by Turchetti et al., (2016) were adopted here.", "mime": "application/pdf"}, {"id": "cet-11801", "words": "3214", "extension": ".htm", "flesch": "53", "author": "How, Bing Shen; Orosz, Akos; Teng, Sin Yong; Lim, Juin Yau; Friedler, Ferenc", "title": "Heat Integrated Water Regeneration Network Synthesis via Graph-Theoretic Sequential Method", "date": "2021", "keywords": "energy; graph; heat; hens; model; network; synthesis; water", "summary": "In the first step, a set of feasible water regeneration networks is generated using the conventional P-graph framework. Notably, Lim et al. (2017) had demonstrated how P-graph can be used for water network synthesis.", "mime": "application/pdf"}, {"id": "cet-11802", "words": "3152", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-11802", "date": null, "keywords": "cost; graph; model; power; process; rice; sibr", "summary": "The efficiency of this system is further enhanced using process integration by identifying potential material or energy synergies between process units. Aside from this, economic and environmental benefits consideration are possible through integration of process units that could increase farmer revenues and decreased carbon emissions, respectively.", "mime": "application/pdf"}, {"id": "cet-11803", "words": "3511", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-11803", "date": null, "keywords": "graph; input; model; output; substitution", "summary": "Results show that economic systems which allow for partial substitution are more resilient when disruptions occur in certain sectors of the economy. Tan R.R., Aviso K.B., Foo D.C.Y., 2018, Carbon emissions pinch analysis of economic systems, Journal of Cleaner Production, 182, 863-871.", "mime": "application/pdf"}, {"id": "cet-11804", "words": "3804", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-11804", "date": null, "keywords": "covid-19; energy; impact; lockdown; pandemic; quality; review; studies; total; water", "summary": "Within the top 10 countries with the most contribution to water impact of COVID-19 studies (18 authors), seven of which are within the top 10 countries with the most number of total infected cases. A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Yee Van Fan, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2021, AIDIC Servizi S.r.l. ISBN 978-88-95608-86-0; ISSN 2283-9216 The Impact of COVID-19 on the Water Sector: A Review Xuexiu Jiaa,*, Petar Sabev Varbanova, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161a, Xiaoping Jiab a Sustainable Process Integration Laboratory \u2013 SPIL, NETME Centre, Faculty of Mechanical Engineering, Brno University of Technology - VUT Brno, Technick\u00e1 2896/2, 616 69 Brno, Czech Republic b Qingdao University of Science and Technology, Zhengzhou Road 53, mailbox 97, Qingdao, China jia@fme.vutbr.cz This paper provides a literature review of the impact of the COVID-19 spread-prevention measures on the water sectors, including general water network management, water quality and quantity, and wastewater treatment.", "mime": "application/pdf"}, {"id": "cet-11805", "words": "3705", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-11805", "date": null, "keywords": "analysis; chem; conservation; eng; networks; pinch; resource; source; uncertainties", "summary": "Revised: 22 September 2021; Accepted: 4 October 2021 Please cite this article as: Bandyopadhyay S., 2021, Incorporating Uncertainties in Pinch Analysis, Chemical Engineering Transactions, 88, 73-78 DOI:10.3303/CET2188012 CHEMICAL ENGINEERING TRANSACTIONS VOL. 88, 2021 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Yee Van Fan, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2021, AIDIC Servizi S.r.l. ISBN 978-88-95608-86-0; ISSN 2283-9216 Incorporating Uncertainties in Pinch Analysis Santanu Bandyopadhyay Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Powai, Mumbai, 400076, India santanub@iitb.ac.in Conservation of resources is a crucial prerequisite for sustainable developments. Pinch Analysis helps in conserving resources through efficient solution procedures in source-sink networks.", "mime": "application/pdf"}, {"id": "cet-11806", "words": "3736", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-11806", "date": null, "keywords": "age; allocation; contact; covid-19; group; model; number; rates; vaccine", "summary": "Allocation models for COVID-19 vaccines The models are intended to provide recommendations of vaccine allocation in the general population with respect to two alternative objectives. Both a linear programming model and a nonlinear programming model have been developed to determine the optimal allocation of COVID-19 vaccines that minimize fatalities and COVID-19 transmission, respectively.", "mime": "application/pdf"}, {"id": "cet-11807", "words": "3740", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-11807", "date": null, "keywords": "energy; heat; layer; lpcm; pcm; tank; temperature; tes; thickness", "summary": "Table 2: Steady-state performance for all configurations Configurations \u03b7ch % \u03b7disch % \u03b7cyclic % \u03c3 % \u03b3 % Erecovered (MWh) 33.3 % HPCM - 33.3 % IPCM - 33.3 % LPCM 87.9 83.5 73.4 76.4 74.6 159.2 80 % HPCM - 10 % IPCM - 10 % LPCM 94.9 89.9 84.6 81.5 80.3 203.2 70 % HPCM - 10 % IPCM - 20 % LPCM 89.2 85.5 76.9 82.7 81.5 198.1 60 % HPCM - 10 % IPCM - 30 % LPCM 88.9 83.2 73.9 80.1 78.8 183.8 50 % HPCM - 10 % IPCM - 40 % LPCM 86.1 82.1 71.3 76.2 72.8 154.4 40 % HPCM - 10 % IPCM - 50 % LPCM 84.2 80.9 68.5 72.4 66.3 151.4 30 % HPCM - 10 % IPCM - 60 % LPCM 83.8 79.8 66.4 68.7 59.6 147.4 20 % HPCM - 10 % IPCM - 70 % LPCM 81.7 77.3 62.5 65.1 51.1 132.9 10 % HPCM - 10 % IPCM - 80 % LPCM 77.2 73.6 57.6 60.2 39.2 111.2 0 100 200 300 400 500 600 700 250 300 350 400 450 500 550 600 Discharging cycle Charging cycle(a) Elfeky K.E., Mohammed A., Ahmed N., Lu L., Wang Q.W., Thermal and economic evaluation of phase change material volume fraction for thermocline tank used in concentrating solar power plants, Applied Energy. 2020, 267,115054 Elfeky K.E., Mohammed A., Wang Q.W., 2020, Numerical investigation of cycle cut-off criterion on system performance of thermocline TES tank for CSP plants, Chemical Engineering Transactions, 81, 499 - 504 Elfeky K. E., Li X., Ahmed N., Lu L., Wang Q.W, 2019, Optimization of thermal performance in thermocline tank thermal energy storage system with the multilayered PCM(s) for CSP tower plants, Applied Energy, 243, 175 - 190 Elfeky K. E., Ahmed N., Wang Q.W, 2018, Numerical comparison between single PCM and multi-stage PCM based high temperature thermal energy storage for CSP tower plants, Applied Thermal Engineering, 139, 609 - 622.", "mime": "application/pdf"}, {"id": "cet-11933", "words": "4228", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-11933", "date": null, "keywords": "analysis; barriers; business; causal; fuzzy; index; matrix; relation; set; smes", "summary": "Prominence is the degree of the linkage of barrier in the network of problems as the barrier is both aggravated by other barriers and aggravative to the other barriers. For example, the relative importance of barrier i as compared to barrier j is denoted as aij.", "mime": "application/pdf"}, {"id": "cet-11934", "words": "3452", "extension": ".htm", "flesch": "48", "author": "Horv\u00e1thov\u00e1, Michaela ; Oravec, Juraj ; Bako\u0161ov\u00e1, Monika; M\u00e9sz\u00e1ros , Alajos", "title": "Carbon Footprint Analysis of a Laboratory Plate Heat Exchanger Control", "date": "2021", "keywords": "carbon; control; controller; exchanger; heat; heat exchanger; liquid", "summary": "The challenges of heat exchanger control and the analysis of its energetic consumption are provided in Oravec et al. (2020). (10) Based on all the defined parameters, the amount of carbon emissions associated with heat exchanger control is computed according to the following formula: \ud835\udc5aCO2 = \ud835\udc50 \ud835\udc5etotal \ud835\udc53CO2 .", "mime": "application/pdf"}, {"id": "cet-11935", "words": "3556", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-11935", "date": null, "keywords": "hydrogen; optimisation; process; production; solar; ssmr; tac; \ud835\udc39\ud835\udc3b2", "summary": "Koumi Ngoh, S., Njomo, D., 2012, An overview of hydrogen gas production from solar energy, Renewable and Sustainable Energy Reviews, 16, 6782-6792. Solar energy for hydrogen production has received significant attention in recent years due to its primary abundance as an energy source (Koumi Ngoh et al., 2012).", "mime": "application/pdf"}, {"id": "cet-11936", "words": "3459", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-11936", "date": null, "keywords": "et al; manufacturing; study; sustainability; svsm; value; \u221a \u221a", "summary": "\u221a \u221a \u221a \u221a \u221a \u221a Nallusamy et al. (2015) \u221a \u221a \u221a Edtmayr et al. (2016) \u221a \u221a \u221a \u221a \u221a \u221a Garza-Reyes et al. (2018) \u221a \u221a \u221a Hartini et al. (2018) \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a Choudhary et al. (2019) \u221a \u221a Gholami et al. (2019) \u221a \u221a \u221a Maqbool et al. (2019) \u221a Mu\u00f1oz-Villamizar et al. (2019) \u221a \u221a \u221a \u221a \u221a Hartini et al. (2020) \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a Marie et al. (2020) \u221a \u221a \u221a \u221a \u221a \u221a Samant and Prakash (2020) \u221a \u221a \u221a \u221a Gholami et al. (2021) \u221a \u221a \u221a \u221a Viles et al. (2021) \u221a Selected indicators \u221a \u221a \u221a \u221a \u221a \u221a \u221a \u221a Cost: C1 Time; C2 Cost; C3 Inventory; C4 Quality compliance and product defect; C5 Changeover time Environmental: E1 Material consumption; E2 Energy consumption; E3 Waste recycling; E4 Water consumption; E5 Hazard material; E6 Air pollution Social: S1 Satisfaction level; S2 Work environment: noise level and lighting level; S3 Physical work: activity with risk and lost workday; S4 Employee training 860 2. DOI: 10.3303/CET2188143 Paper Received: 1 June 2021; Revised: 6 September 2021; Accepted: 3 October 2021 Please cite this article as: Sari E., Marie I.A., Erika E., Chofreh A.G., Goni F.A., Kleme\u0161 J.J., Zeinalnezhad M., 2021, Lean Sustainable Competitive Manufacturing Strategy Assessment: A Case Study in the Indonesian Car Manufacturing Company, Chemical Engineering Transactions, 88, 859-864 DOI:10.3303/CET2188143 CHEMICAL ENGINEERING TRANSACTIONS VOL. 88, 2021 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Yee Van Fan, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2021, AIDIC Servizi S.r.l.", "mime": "application/pdf"}, {"id": "cet-11937", "words": "4581", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-11937", "date": null, "keywords": "design; engineering; exchangers; flow; heat; heat transfer; performance; pillow; plate; plate heat; pphes; transfer", "summary": "Arsenyeva O., Tran J., Piper M., Kenig E.Y., 2019b, An approach for pillow plate heat exchangers design for single-phase applications, Applied Thermal Engineering, 147, 579\u2013591. PPHEs combine the advantages of the most commonly used conventional heat exchanger types, being as pressure and temperature resistant as shell-and-tube heat exchangers and as cost-effective and compact as plate heat exchangers.", "mime": "application/pdf"}, {"id": "cet-11938", "words": "4373", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-11938", "date": null, "keywords": "bed; calcination; flow; gas; heat; mass; model; reactor; temperature; wall", "summary": "For cold columns without reactions and with constant solids and gas mass flow rates along \ud835\udc67, the changes of velocities are due to the changes of volumetric fractions only. Reactor model The proposed reactor configuration is a continuous CFB, consisting of an absorber tube, which has the role of a riser of the CFB, the walls of which are exposed to concentrated solar radiation, allowing indirect heating of the reaction chamber.", "mime": "application/pdf"}, {"id": "cet-11939", "words": "3116", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-11939", "date": null, "keywords": "chain; entity; ffb; oil; palm; supply; traceability", "summary": "The palm oil products generated from oil palm are widely used in our daily life, contributing from food processing, personal care and hygiene sectors as well as the biofuel industry. However, the reputation of oil palm has been declining as it was accused for causing environmental and social problems, such as deforestation, workers exploitation.", "mime": "application/pdf"}, {"id": "cet-11940", "words": "3497", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-11940", "date": null, "keywords": "biodiesel; chemical; cleaning; cost; fouling; membrane; model; production; reactor", "summary": "Membrane cleaning contributes to the reactor\u2019s operating cost to a large extent, including energy, chemicals and even production loss. Therefore, membrane cleaning is critical (Popovi\u0107 et al., 2010).", "mime": "application/pdf"}, {"id": "cet-11941", "words": "3509", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-11941", "date": null, "keywords": "biorefinery; chemical; cost; drying; energy; extraction; methods; microalgae; process; production; review; technologies", "summary": "The remaining parts of microalgae cells can been converted in to additional products such as biogas or fertilizer in the remnant treatment section (Galanopoulos et al., 2019). However, centrifugation is currently too energy-intensive and costly to be a viable choice to separate microalgae from water (Kim et al., 2013).", "mime": "application/pdf"}, {"id": "cet-12205", "words": "3655", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12205", "date": null, "keywords": "chemical; data; design; index; indicators; isd; park; process; safety", "summary": "Gao et al. (2021b) reviewed the existing literature on inherent safety from a different, more broadly oriented point of view, not focused only on detailed practical guidance of early process design. These papers appear to add little to the earlier described ones of the Park-team on early process design.", "mime": "application/pdf"}, {"id": "cet-12206", "words": "3339", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12206", "date": null, "keywords": "dispersion; dust; furnace; particle; powder; pressure; psd", "summary": "References Bu Y., Yuan Y., Xue S., Amyotte P., Li C., Yuan W., Ma Z., Yuan C., Li G., 2020, Effect of admixed silica on dispersibility of combustible dust clouds in a Godbert-Greenwald furnace, Powder Tech., 374, 496-506. Table 3: Minimum ignition temperature of glucose powder as a function of the dispersion pressure Procedure Pressure 0.2 barg Pressure 0.5 barg Pressure 1.0 barg ISO 80079-20-2 MIT (\u00b0C) 480 500 530 460 (min - 20\u00b0C) 4.", "mime": "application/pdf"}, {"id": "cet-12207", "words": "3951", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12207", "date": null, "keywords": "ch4; co2; flammability; fuel; hydrogen; lfl; mix; mixtures; ufl", "summary": "Mixture CH4 In this light, the characterization of the effect of fuel composition on the overall reactivity and safety parameters represents an essential step for the diffusion of this technology (Eckart et al., 2017).", "mime": "application/pdf"}, {"id": "cet-12208", "words": "4021", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12208", "date": null, "keywords": "cfd; fire; liquid; models; pressure; results; tank; zones", "summary": "The good agreement with experimental results proved the potentiality of CFD models in predicting tank behaviour under fire exposure. CFD models ensure a physically sound description of the phenomena characterizing the thermohydraulic inside a tank exposed to fire, but are very computationally expensive.", "mime": "application/pdf"}, {"id": "cet-12209", "words": "3653", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12209", "date": null, "keywords": "dust; model; particle; value; \ud835\udc3e\ud835\udc3e\ud835\udc46\ud835\udc46\ud835\udc46\ud835\udc46; \ud835\udf15\ud835\udf15\ud835\udc46\ud835\udc46", "summary": "For big dust particles, oxygen diffusion through the pores can be considered as the rate determining step for metal dust explosion and, therefore, it is the main contributor to the deflagration index value. The model predicts the Kst value by solving material and energy balance equations for spherical dust particles wrapped by a single constant temperature fireball (generated by the ignitors explosion inside the 20 L sphere).", "mime": "application/pdf"}, {"id": "cet-12210", "words": "4217", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12210", "date": null, "keywords": "criterion; device; mass; process; reaction; reactor; runaway; safety; temperature", "summary": "Both types of safety devices have in common that predefined shutdown limits are usually set conservatively low to avoid an uncontrolled runaway reaction. Regarding multi-purpose plants, optimum protection for each reactor cannot always be provided by only one type of safety device.", "mime": "application/pdf"}, {"id": "cet-12211", "words": "3840", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12211", "date": null, "keywords": "devices; iso; pressure; protection; relief; safety; sizing; standard; systems", "summary": "Te st in g Type testing of PRV Type testing of BD Type testing of low pressure relief systems Type testing of high pressure PRV and BD Requirements for authorized observer Type testing of pressure protection systems during operation Integrity proof of PRV after re-installation Component testing 502 valves, controlled safety pressure protection systems (CSPRS), combination devices, and upstream and downstream protection equipment. Accepted: 25 April 2022 Please cite this article as: Schmidt J., 2022, Strategy for ISO 4126 into 2030 \u2013 future standardization of pressure protection systems, Chemical Engineering Transactions, 90, 499-504 DOI:10.3303/CET2290084 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l.", "mime": "application/pdf"}, {"id": "cet-12212", "words": "2620", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12212", "date": null, "keywords": "et al; fullarton; fullarton et; model; moncalvo; moncalvo et; tank", "summary": "A detailed overview of common models for the sizing of tank breathing valves during the cooling of storage tanks is given in (Schmidt et al. 505 2019). Fullarton, D.; Evripidis, J.; Schluender, E.U (1987): Influence of product vapour condensation on venting of storage tanks.", "mime": "application/pdf"}, {"id": "cet-12213", "words": "2341", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12213", "date": null, "keywords": "air; explosion; methane; pressure; temperature", "summary": "This work allowed a systematic comparison of the structural and bonding properties among the CnH2n analogs in the physics and chemistry of low temperatures explosions. Determination of maximum explosion pressure of methane-air mixtures at temperatures of T = -20 - 60 \u00b0C and concentrations = 2.5 - 16.0 vol.%.", "mime": "application/pdf"}, {"id": "cet-12214", "words": "2936", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12214", "date": null, "keywords": "astm; burning; ignition; schlieren; source; spark; volume", "summary": "It is known that the minimum ignition energy alone is not a suitable characteristic for the choice of ignition source for standard tests. For the development of a new standard for hybrid dust/gas-mixtures all the features of ignition sources should be investigated or at least be stated, what has not been done so far (see Table 1).", "mime": "application/pdf"}, {"id": "cet-12215", "words": "3057", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-12215", "date": null, "keywords": "acceleration; braking; driving; hand; speed; tatra; values; vehicle", "summary": "Theoretical basis for an acceleration evaluation Besides of measuring braking distances, this analysis was aimed at evaluating vehicle accelerations. Table 1: Vehicle braking distance measurement results Vehicle SCANIA TATRA v0 (km.h-1) 50 60 50 60 Run braking time (s) braking distance (m) braking time (s) braking distance (m) braking time (s) braking distance (m) braking time (s) braking distance (m)", "mime": "application/pdf"}, {"id": "cet-12216", "words": "2641", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12216", "date": null, "keywords": "flash; liquid; nonafluorobutane; point; temperature", "summary": "No No Figure 5 shows the flame development in the test vessel (video captures) performed at 3.3\u00b0C. 532 Figure 5: LEP: Flame development (left to right) in the gas phase (liquid temperature: 3.3\u00b0C) after spark generation Figure 5 clearly shows the phenomenon of self-sustained combustion (flame detachment, ignition criterion) and not a halo phenomenon as in the case of flash point ignition test. EN 15794, 2009, Determination of explosion points of flammable liquids.", "mime": "application/pdf"}, {"id": "cet-12217", "words": "3995", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12217", "date": null, "keywords": "case; cfd; fire; hydrogen; insulation; lh2; mlvi; model; pressure; tank; temperature", "summary": "Ustolin F., Iannaccone T., Cozzani V., Jafarzadeh S., Paltrinieri N., 2021, Time to Failure Estimation of Cryogenic Liquefied Tanks Exposed to a Fire, Proceedings of the 31st European Safety and Reliability Conference, 935\u2013942. 540 lp-2022-abstract-091.pdf Cryogenic Hydrogen Storage Tanks Exposed to Fires: a CFD Study This time was deducted by observing the experimental pressure and temperature curves, that show a sudden increase of tank pressure and temperatures starting from 115 s.", "mime": "application/pdf"}, {"id": "cet-12218", "words": "2897", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12218", "date": null, "keywords": "hydrogen; ignition; lh2; release; rpts; surface; water", "summary": "Under water pressures of several bars were seen when ignition occurred. Revised: 10 March 2022; Accepted: 28 April 2022 Please cite this article as: van Wingerden K., Kluge M., Habib A.K., Skarsv\u00e5g H.L., Ustolin F., Paltrinieri N., Ods\u00e6ter L.H., 2022, Experimental investigation into the consequences of release of liquified hydrogen onto and under water, Chemical Engineering Transactions, 90, 541-546 DOI:10.3303/CET2290091 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-88-4; ISSN 2283-9216 Experimental Investigation into the Consequences of Release of Liquified Hydrogen onto and under Water Kees van Wingerdena, Martin Klugeb, Abdel Karim Habibb, Hans L.Skarsv\u00e5gc, Federico Ustolind, Nicola Paltrinierid, Lars H. Ods\u00e6terc a Gexcon AS, Fantoftvegen 38, 5072 Bergen, Norway b Bundesanstalt f\u00fcr Materialforschung und \u2013Pr\u00fcfung, Unter den Eichen 87, 12205 Berlin, Germany c SINTEF Energy Research, 7465 Trondheim, Norway d Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology NTNU, 7491 Trondheim, Norway kees.van.wingerden@vysusgroup.com Large-scale experiments have been performed to investigate the possible consequences of realistic amounts of liquified hydrogen (LH2) encountering water.", "mime": "application/pdf"}, {"id": "cet-12219", "words": "3302", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12219", "date": null, "keywords": "bleve; fire; hydrogen; pressure; storage; test; vessel", "summary": "Accepted: 1 May 2022 Please cite this article as: van Wingerden K., Kluge M., Habib A.K., Ustolin F., Paltrinieri N., 2022, Medium-scale tests to investigate the possibility and effects of BLEVEs of storage vessels containing liquified hydrogen, Chemical Engineering Transactions, 90, 547-552 DOI:10.3303/CET2290092 CHEMICAL ENGINEERING TRANSACTIONS VOL. Rigas F., Sklavounos S., 2005, Evaluation of hazards associated with hydrogen storage facilities, International Journal of Hydrogen Energy, 30, 1501 \u2013 1510 Ustolin F., Song G., Paltrinieri N., 2019, The Influence of H2 Safety Research on Relevant Risk Assessment, Chemical Engineering Transactions, 74, 1393-1398 Ustolin F., Paltrinieri N., Landucci G., 2020, An innovative and comprehensive approach for the consequence analysis of liquid hydrogen vessel explosions, Journal of Loss Prevention in the Process Industries, 68, 104323. 552 lp-2022-abstract-002.pdf Medium-scale Tests to Investigate the Possibility and Effects of BLEVEs of Storage Vessels Containing Liquified Hydrogen", "mime": "application/pdf"}, {"id": "cet-12220", "words": "3695", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12220", "date": null, "keywords": "analysis; carbon; composition; emissions; filament; gas; materials; printers; products; safety", "summary": "Revised: 15 March 2022; Accepted: 16 April 2022 Please cite this article as: V\u011b\u017en\u00edkov\u00e1 H., Sk\u0159\u00ed\u017eovsk\u00e1 M., 2022, Time dependence of gas-phase emissions from 3D printer filaments, Chemical Engineering Transactions, 90, 553-558 DOI:10.3303/CET2290093 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-88-4; ISSN 2283-9216 Time Dependence of Gas-Phase Emissions from 3D Printer Filaments Hana Veznikova*, Michaela Skrizovska Department of Occupational and Process Safety, Faculty of Safety Engineering, V\u0160B \u2013 TU Ostrava, Lumirova 13, Ostrava, Czech Republic hana.veznikova@vsb.cz Gas-phase emissions from 3D printers have received widespread attention with respect to their health risk. https://ec.europa.eu/docsroom/documents/40562 Ngo T.D., Kashani A., Imbalzano G., NguyenK.T.Q., Hui D., 2018, Additive manufacturing (3D printing): A review of materials, methods, applications and challenges, Composites Part B: Engineering, 143, 172-196 557 http://data.europa.eu/eli/dir/1998/24/oj http://data.europa.eu/eli/dir/2001/95/oj https://ec.europa.eu/docsroom/documents/40562 https://ec.europa.eu/docsroom/documents/40562 Potter P.M., Al-Abed S.R., Hasan F., Lomnicki S.M., 2021, Influence of polymer additives on gas-phase emissions from 3D printer filaments., Chemosphere, 279, 130543 V\u0160B \u2013 TU Ostrava, 2021, Veznikova H., Barcova K., Lesnak M., Combustion flue gas analysis line, Patent no.", "mime": "application/pdf"}, {"id": "cet-12221", "words": "2900", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12221", "date": null, "keywords": "blower; devices; flow; pressure; safety; vacuum; valve", "summary": "This incident shows how important it is to evaluate the \u201csafe discharge\u201d of pressure safety valves carefully. Accepted: 5 May 2022 Please cite this article as: Wichmann O., D\u00fcnger U., Stellmacher V., 2022, Essential Aspects of Pressure Safety \u2013 Experiences from Industrial Practice, Chemical Engineering Transactions, 90, 559-564 DOI:10.3303/CET2290094 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-88-4; ISSN 2283-9216 Essential Aspects of Pressure Safety \u2013 Experiences from Industrial Practice Oliver Wichmann, Udo D\u00fcnger*, Volker Stellmacher Covestro Deutschland AG, 51373 Leverkusen udo.duenger@covestro.com Four simple, real examples from the chemical industry show particularly critical points which, according to experience, can jeopardize the safe functioning of pressure safety devices.", "mime": "application/pdf"}, {"id": "cet-12222", "words": "3516", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12222", "date": null, "keywords": "analysis; damage; data; domino; effects; probability; qra; uncertainties; uncertainty", "summary": "Khakzad et al. (2018) classified uncertainty in domino effect analysis into two main categories: data uncertainty and model uncertainty. 565 2. Uncertainty in QRA of domino effects Figure 1: uncertainty in QRA of domino effects Due to our lack of knowledge and randomness, there exists a great deal of uncertainty in domino effect analysis.", "mime": "application/pdf"}, {"id": "cet-12223", "words": "3241", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-12223", "date": null, "keywords": "accident; analysis; barriers; bow; identification; safety; scenarios; security", "summary": "To identify major accident scenarios considering both safety and security perspectives, attack tree analysis is employed to identify security scenarios that can be associated with the obtained bow-ties. In terms of prevention and mitigation of major accidents, safety and security barriers are used in various forms to protect the chemical process industries from safety and security-related undesired events and mitigate the potentially catastrophic consequences (Villa & Cozzani, 2016).", "mime": "application/pdf"}, {"id": "cet-12224", "words": "4123", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12224", "date": null, "keywords": "data; information; level; mah; management; safety; sensors; seveso; sms; system", "summary": "Safety management system for controlling major accident hazards SMS-MAH is divided, according to Seveso legislation, into a Policy for the prevention of accidents and seven points, including: Resources and Leadership (including Training), Risk Assessment, Operating Control, Management of Change, Emergency Planning and Management, Performances (including Near Miss Management), Control and Review (including Audit). They offer, coupled with Artificial Intelligence, a great opportunity to make safety management at Seveso sites much more dynamic and participatory.", "mime": "application/pdf"}, {"id": "cet-12225", "words": "3173", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12225", "date": null, "keywords": "chemical; controller; jacket; reactor; sensitivity; state; system; temperature", "summary": "\ud835\udefe\ud835\udefe Arrhenius number \ud835\udc38\ud835\udc38\ud835\udc5b\ud835\udc5b\ud835\udc61\ud835\udc61\ud835\udc61\ud835\udc61 \ud835\udc45\ud835\udc45 \u2219 \ud835\udc47\ud835\udc47\ud835\udc56\ud835\udc56\ud835\udc56\ud835\udc56 \ud835\udc37\ud835\udc37\ud835\udc37\ud835\udc37 Damkohler number \ud835\udc3f\ud835\udc3f \u2219 \ud835\udc34\ud835\udc34 \u2219 exp(\u2212\ud835\udefe\ud835\udefe) \u2219 \ud835\udf0c\ud835\udf0c\ud835\udc50\ud835\udc50\ud835\udc5b\ud835\udc5b\ud835\udc61\ud835\udc61 \u2219 \ud835\udc43\ud835\udc43\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc5c,0 \u2219 \ud835\udc43\ud835\udc43\ud835\udc56\ud835\udc56\ud835\udc5b\ud835\udc5b\ud835\udc60\ud835\udc60\u210e\ud835\udc61\ud835\udc61,0 \u2219 \ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40 \ud835\udf0c\ud835\udf0c \u2219 \ud835\udc63\ud835\udc63\ud835\udc5c\ud835\udc5c \ud835\udc46\ud835\udc46\ud835\udeff\ud835\udeff Stanton number 4 \u2219 \ud835\udc48\ud835\udc48 \u2219 \ud835\udc3f\ud835\udc3f \ud835\udf0c\ud835\udf0c \u2219 \ud835\udc50\ud835\udc50\ud835\udc60\ud835\udc60 \u2219 \ud835\udc51\ud835\udc51\ud835\udc45\ud835\udc45 \u2219 \ud835\udc63\ud835\udc630 \ud835\udc46\ud835\udc46\ud835\udeff\ud835\udeff\ud835\udc50\ud835\udc50\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc50\ud835\udc50 Jacket Stanton number 4 \u2219 \ud835\udc48\ud835\udc48 \u2219 \ud835\udc3f\ud835\udc3f \ud835\udf0c\ud835\udf0c\ud835\udc50\ud835\udc50\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc50\ud835\udc50 Table 2: Dimensionless variables Parameter Meaning Definition \ud835\udeff\ud835\udeff Naphthalene conversion \ud835\udc36\ud835\udc36\ud835\udc56\ud835\udc56\ud835\udc56\ud835\udc56,\ud835\udc56\ud835\udc56\ud835\udc5b\ud835\udc5b\ud835\udc60\ud835\udc60\u210e\ud835\udc61\ud835\udc61 \u2212 \ud835\udc36\ud835\udc36\ud835\udc56\ud835\udc56\ud835\udc5b\ud835\udc5b\ud835\udc60\ud835\udc60\u210e\ud835\udc61\ud835\udc61 \ud835\udc36\ud835\udc36\ud835\udc56\ud835\udc56\ud835\udc56\ud835\udc56,\ud835\udc56\ud835\udc56\ud835\udc5b\ud835\udc5b\ud835\udc60\ud835\udc60\u210e\ud835\udc61\ud835\udc61 \ud835\udf03\ud835\udf03 Dimensionless reactor temperature \ud835\udc47\ud835\udc47 \u2212 \ud835\udc47\ud835\udc47\ud835\udc56\ud835\udc56\ud835\udc56\ud835\udc56 \ud835\udc47\ud835\udc47 \u2219 \ud835\udefe\ud835\udefe \ud835\udf03\ud835\udf03\ud835\udc64\ud835\udc64 Dimensionless wall temperature \ud835\udc47\ud835\udc47\ud835\udc64\ud835\udc64 \u2212 \ud835\udc47\ud835\udc47\ud835\udc56\ud835\udc56\ud835\udc56\ud835\udc56 \ud835\udc47\ud835\udc47\ud835\udc64\ud835\udc64 \u2219 \ud835\udefe\ud835\udefe \ud835\udc67\ud835\udc67 Dimensionless axial coordinate \ud835\udc59\ud835\udc59 \ud835\udc3f\ud835\udc3f \ud835\udeff\ud835\udeff Dimensionless time \ud835\udf0f\ud835\udf0f \ud835\udc63\ud835\udc63\ud835\udc5c\ud835\udc5c \ud835\udc3f\ud835\udc3f", "mime": "application/pdf"}, {"id": "cet-12226", "words": "3948", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-12226", "date": null, "keywords": "approach; facilities; generation; installations; power; prevention; process; safety; waste", "summary": "593 Conclusions A resilient safer approach to cope with the oily waste generation in industrial facilities was established and systematically updated for ten years throughout the state-of-the-art and the lesson learned during its implementation in industrial installations from Cienfuegos Territory, Cuba. The goal of this study was to establish a resilient approach to cope with oily waste generation in industrial facilities.", "mime": "application/pdf"}, {"id": "cet-12227", "words": "3371", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12227", "date": null, "keywords": "losses; operations; operator; pha; process; reactor; safety; transient", "summary": "The tools include, but are not limited to, operator competency, efficacy of process hazard analysis (PHA) and safety critical task analysis (SCTA). With that in mind: \u2022 Operators should be required to review, and be tested on, emergency procedures on an annual basis.", "mime": "application/pdf"}, {"id": "cet-12228", "words": "4118", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12228", "date": null, "keywords": "control; min; process; reactor; recipe; series; temperature; test", "summary": "Indeed, most of the current literature works have showed applications of continuous reactors for latexes with monomer content well below 50% w/w. Before proposing a BtoC procedure, several design factors must be solved: 1) Identification of the number of required continuous reactors; 2) Identification of a control loop strategy for the liquid level inside the reactors; 602 3) Identification of a temperature control strategy (that is, isothermal or isoperibolic) where the Proportional- Integral parameters should be dynamically adapted to address for the best control strategy in the different phases of the process.", "mime": "application/pdf"}, {"id": "cet-12229", "words": "2867", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-12229", "date": null, "keywords": "chemical; data; kinetic; order; pressure; rate; reaction; safety; temperature", "summary": "In higher pressure ranges, especially in reaction systems with solvents with a high vapor pressure, obviously exothermic reactions can occur. With this measurment setting different reaction systems will be observed, and the influence of the different calculation ways for the temperature rise and kinetic parameters will be evaluated.", "mime": "application/pdf"}, {"id": "cet-12230", "words": "3787", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12230", "date": null, "keywords": "accident; analysis; chemical; czech; expert; investigation; lessons; police; report; risk; safety", "summary": "Accepted: 10 May 2022 Please cite this article as: Dobe\u0161 P., Martin\u00edkov\u00e1 B., Kle\u010dka V., Lep\u00edk P., Novotn\u00fd P., Danihelka P., 2022, Review of selected chemical accident report sites regarding major accident investigation and lessons learnt needs, Chemical Engineering Transactions, 90, 613-618 DOI:10.3303/CET2290103 613 3. Sklet S., 2002, Methods for accident investigation, Norwegian University of Science and Technology, Reliability, Safety, and Security Studies, Trondheim, Norway.", "mime": "application/pdf"}, {"id": "cet-12231", "words": "3984", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12231", "date": null, "keywords": "experiments; hydrogen; lh2; release; test; wind", "summary": "Revised: 17 March 2022; Accepted: 4 May 2022 Please cite this article as: Hansen O.R., Hansen E.S., 2022, CFD-modelling of large scale LH2 release experiments, Chemical Engineering Transactions, 90, 619-624 DOI:10.3303/CET2290104 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l. Simulation of outdoor LH2 release experiments Seven different experiments were performed as part of the outdoor LH2 release experiments, three of the tests had a character of preparatory tests or final test with the aim to empty tanks, while tests 3 to 6 were near identical repeats of two different scenarios.", "mime": "application/pdf"}, {"id": "cet-12232", "words": "2778", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12232", "date": null, "keywords": "escape; facility; floor; oil; operator; simulation", "summary": "In some cases, Escape, Evacuation and Rescue Analysis (EERA) are conducted in design phase in order to confirm that the designed escape and evacuation facilities are enough safe for operator escape and evacuation. \u2022 If the barricade is well planned, there is no big difference for operator escape.", "mime": "application/pdf"}, {"id": "cet-12233", "words": "2448", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12233", "date": null, "keywords": "accidents; atex; dust; equipment; explosion; figure; risk", "summary": "Table 1: Correspondence between codes and activities Codes C10.61 C10.62 C10.71 C10.72 C10.73 G46.21 Activities Manufacture of grain mill products Manufacture of starch products Manufacture of bread Manufacture of bakery products Manufacture of pasta Wholesale of grain and animal feeds A second step consisted in reducing the scope of the database accident analysis to the trade in grains, animal feed and flour mill activities (i.e. G46.21, C10.61 and C10.62 codes in the French nomenclature of activities), as they were more specifically concerned by dust explosion risk. This study shows that, although regulations have been applicable since 2003, the management of the fire and explosion risks is very disparate, depending on the culture of the company and its organization.", "mime": "application/pdf"}, {"id": "cet-12234", "words": "3687", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12234", "date": null, "keywords": "barrier; database; failure; incidents; safeguarding; safety; start; valves", "summary": "An even broader approach is to investigate multiple incidents in order to find causes and characteristics that are common to a larger number of incidents. Thus, it can be beneficial to look at multiple incidents and see if there are common root causes that can be targeted with a reduced set of measures.", "mime": "application/pdf"}, {"id": "cet-12235", "words": "3806", "extension": ".pdf", "flesch": "28", "author": null, "title": "cet-12235", "date": null, "keywords": "batteries; battery; bess; energy; fires; incidents; ion; safety; systems; vehicles", "summary": "Table 1: distribution of Tesla model fires known records as a function of reported root causes (multiple EV fires in stores or car carrier excluded) Fire root cause or circumstance # EV fires (-) Proportion of EV fires (%) However, the fervent quest for ever improved performance at static (if not reduced) costs makes ensuring that safety is adequately addressed ever more challenging, as reflected in the numerous recalls of EVs in the last two years following EV fires (Hyundai Kona, Chevy Bolt\u2026).", "mime": "application/pdf"}, {"id": "cet-12236", "words": "3359", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12236", "date": null, "keywords": "bar; ethylene; explosion; oxide; phase; pressure; reaction; reactor", "summary": "The main activity of the company is the manufacture of ethylene oxide (EO) and derivatives. Feeding of ethylene oxide continues over a period of several hours at 100-110 \u00b0C, whilst the mixture is cooled via E-3131 and the pressure rises to 11 bar gauge (12 bar absolute).", "mime": "application/pdf"}, {"id": "cet-12237", "words": "1929", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-12237", "date": null, "keywords": "air; ash; dust; explosion; mixtures; pressure", "summary": "The main conclusions: 1) Accurate determination of maximum explosion pressure and deflagration index at atmospheric temperatures and pressure for concentrations C = 250 \u2013 2000 g/m3. 2) The maximum values of explosion pressures and rates of pressure rise. 3) The values of maximum explosion pressure show that the ash is two times less dangerous than the coal-air dust at given experimental conditions. EN 14034-2+A1, Determination of explosion characteristics of dust clouds - Part 2: determination of the maximum rate of explosion pressure rise of dust clouds, 2011.", "mime": "application/pdf"}, {"id": "cet-12238", "words": "3503", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12238", "date": null, "keywords": "ammonia; environment; index; pressure; release; risk; station; vessel", "summary": "The highest risk for surroundings presents transport of ammonia pressure vessel from the storage to the pressure station and transport to the storage naturally. Figure 1: Ammonia pressure vessel and station 3.2 Scenarios The Seveso establishment is located in the industrial area, at a distance of about 400 m from the Opava river bank and about 150 m from the highway.", "mime": "application/pdf"}, {"id": "cet-12239", "words": "3161", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12239", "date": null, "keywords": "accident; analysis; mov; operation; pipeline; plant; pressure; process; safety; valve", "summary": "Even though immediate cause is identified as an unreported valve opening failure, accident analysis focuses on the operational flow, communication and signal transmission, i.e. the operational and organizational components liable to lead to unwanted events, when inadequately managed. The study of failure causes associated with corrosion and erosion phenomena are an up-to-date topic for evaluating and strengthening pipeline safety management (Milazzo et al., 2021).", "mime": "application/pdf"}, {"id": "cet-12240", "words": "3027", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12240", "date": null, "keywords": "air; chemical; combustion; flame; hydrocarbons; hydrogen; inhibition; inhibitors; particles", "summary": "However, a review of previous work shows that effective inhibition of hydrogen flames is not straightforward. www.me.berkeley.edu/gri_mech/. van Wingerden, K. and Hoorelbeke, P.,2011, On the potential of mitigating vapour cloud explosions using flame inhibitors, 11AIChE - 2011 AIChE Spring Meeting and 7th Global Congress on Process Safety, Conference Proceedings.", "mime": "application/pdf"}, {"id": "cet-12241", "words": "3432", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12241", "date": null, "keywords": "accidents; data; ignition; industry; operator; process; process safety; safety; silo", "summary": "Many important information for the safety of a process are not necessarily instrumented and a lot of process data are not necessarily important for safety. There are many other examples of process safety accidents where subtle changes, discrete warning signs and weak signals have not been captured and recognized.", "mime": "application/pdf"}, {"id": "cet-12242", "words": "4338", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-12242", "date": null, "keywords": "accident; analysis; chemical; failure; incidents; information; leadership; learning; lessons; practices; process; safety", "summary": "Accepted: 20 April 2022 Please cite this article as: Wood M.H., Koutelos K., Hailwood M., Cowley C., 2022, Learning lessons from chemical incidents \u2013 What\u2019s stopping us and how we can make it happen, Chemical Engineering Transactions, 90, 685-690 DOI:10.3303/CET2290115 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servisi S.r.l. ISBN 978-88-95608-88-4; ISSN 2283-9216 Learning Lessons from Chemical Incidents \u2013 What\u2019s Stopping Us and How We Can Make it Happen Maureen Heraty Wood*a, Konstantinos Koutelosb, Mark Hailwoodc, Charles Cowleyd a European Commission Joint Research Centre, Major Accident Hazards Bureau b Independent consultant c LUBW State Institute for Environment Baden-W\u00fcrttemberg d Cranfield University School of Management Maureen.wood@ec.europa.eu While the value of lessons learning is proclaimed far and wide by industry experts, recent accidents in OECD countries put into question the degree to which high hazard industries are using accident information effectively. Lessons learning has not advanced beyond the \u2018acquisition\u2019 stage Despite all the information collected in open sources and in internal company databases on chemical accidents, there is considerable evidence that lessons learning mainly consists of reporting.", "mime": "application/pdf"}, {"id": "cet-12243", "words": "3512", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-12243", "date": null, "keywords": "activities; culture; directive; establishments; management; operators; safety", "summary": "The majority of operators, i.e. 44 out of 55 stated that they develop safety culture on the premises by introducing safety culture activities and conduct assessment. 11 establishments that did not employ any activity for safety culture improvement stated that they were satisfied with their current state of safety culture or did not have necessary means to improve it, e.g. capacity, time, finances.", "mime": "application/pdf"}, {"id": "cet-12244", "words": "3482", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-12244", "date": null, "keywords": "crisis; debriefing; exercise; learners; learning; scenario; simulation; stimuli; training", "summary": "Developing an EVADE method to assess trainees during crisis management training for major risks and feedback them, Chemical Engineering Transactions, Vol 48, , Pages: 877-882 ISSN 2283-9216 Limousin P., Bony-Dandrieux A., Tixier J. Sauvagnargues S., (2018) Improving crisis exercises and managers\u2019 skills through the development of scenario design. Accepted: 19 April 2022 Please cite this article as: Bony-Dandrieux A., Secheppet M., Bouillet P., Tixier J., 2022, A reference framework to build crisis exercise for strategic crisis unit: an integrated approach from scenario to debriefing, Chemical Engineering Transactions, 90, 697-702 DOI:10.3303/CET2290117", "mime": "application/pdf"}, {"id": "cet-12245", "words": "3910", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12245", "date": null, "keywords": "accidents; ageing; barrier; containment; factors; inspection; management; method; safety; seveso; system", "summary": "Table 1: Direct causes of loss of containment in the 70 material degradation accidents Direct cause Number of ageing accidents % of ageing accidents Corrosion 40 57% Fatigue, creep, embrittlement 19 27% Vibrations 5 7% Erosion 1 1% Material degradation, other 5 7% Figure 2 gives the results for the 70 accidents as shown in the three lines of defence of the Storybuilder bow-tie model. In these frameworks, the understanding of the underlying causes of ageing related accidents, presented in Section 3.2, is essential to prioritise the factors and to steer, consequently, the development of the methods.", "mime": "application/pdf"}, {"id": "cet-12246", "words": "3406", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12246", "date": null, "keywords": "data; degree; grey; human; lng; psfs; reliability", "summary": "Determining key PSFs is a decision-making system, but there is always lack of historical data of PSF. The final result indicates that the proposed method provides a reasonable and effective way to find key PSFs for ensuring human reliability in shipping LNG offloading work.", "mime": "application/pdf"}, {"id": "cet-12247", "words": "3356", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12247", "date": null, "keywords": "barriers; error; factors; methodology; performance; probability; safeguard; safety; task", "summary": "In the model proposed, human error probability is the product of the interaction among three elements: the type of task to be performed (generic task type, GTT), the conditional factors affecting performance (performance shaping factor, PSF), and human factors (human barriers, HB), deriving from the human and organizational factors aimed at preventing errors from the workers. Accepted: 24 April 2022 Please cite this article as: Guglielmi D., Paolucci A., Fraboni F., Mariani M.G., Pietrantoni L., Casson Moreno V., Cozzani V., Mora C., Borzi M., Soscia I., Scataglini L., 2022, Improving the assessment of human barriers: an innovative methodology for the Energy industry, Chemical Engineering Transactions, 90, 715-720 DOI:10.3303/CET2290120 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-88-4; ISSN 2283-9216 Improving the Assessment of Human Barriers: an Innovative Methodology for the Energy Industry Dina Guglielmia, Alessio Paoluccia, Federico Frabonib, Marco Giovanni Marianib, Luca Pietrantonib, Valeria Casson Morenoc, Valerio Cozzanic, Cristina Morad, Marco Borzie, Irene Sosciae, Luciano Scataglinie a Department of Educational Science, University of Bologna, Viale Filippo Re 6, Bologna 40126 (Italy)", "mime": "application/pdf"}, {"id": "cet-12248", "words": "3801", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12248", "date": null, "keywords": "case; decision; factors; makers; making; methods; process; reference; risk; safety", "summary": "Although heuristics can be very useful, especially when decisions have to be made quickly, such shortcuts can lead to various cognitive biases, affecting the outcomes of decision making. FTOPSIS is often used in decision making as quick optimization of the results and their ranking representation based on the similarity of the alternative to the ideal solution: Ci=di-/( di-+ di+), i=1,2,\u2026, m (4) 723 Where dij+=\u2211 \ud835\udc51\ud835\udc51\ufffd\u1e7d\ud835\udc56\ud835\udc56\ud835\udc57\ud835\udc57 \u2212 \u1e7d\ud835\udc57\ud835\udc57+\ufffd\ud835\udc5b\ud835\udc5b \ud835\udc57\ud835\udc57=1 with \u1e7dij+=(9,9,9) and \u1e7dij-(1,1,1) distances from the positive ideal solution A+.", "mime": "application/pdf"}, {"id": "cet-12249", "words": "4257", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-12249", "date": null, "keywords": "education; hse; learning; management; professionals; project; risk; safety; students; teaching; tools", "summary": "Brainstorming, mind-mapping, discussions with professionals, working on case studies and project methods were used for education and training in HSE risk management. Project-based Course: New voluntary course on HSE risk management developed on the Google Classroom blended learning platform.", "mime": "application/pdf"}, {"id": "cet-12250", "words": "3491", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12250", "date": null, "keywords": "instructions; model; operating; operators; procedures; process; safety; use", "summary": "Instruction for furnace mode change \u2022 Instruction for abnormal situation \u2022 Work permit procedures \u2022 Incident investigations \u2022 Process safety event statistics \u2022 Safety climate questionnaire results \u2022 Guideline for writing operating instructions \u2022 Template for operating instructions 3.3 Group discussions Group discussion (focus groups) is a common qualitative research method, which was considered more useful for this project than individual interviews, due to the stimulation provided by group interaction. Accepted: 22 April 2022 Please cite this article as: Lindgren M., 2022, Improving the management and use of operating instructions for process safety, Chemical Engineering Transactions, 90, 733-738 DOI:10.3303/CET2290123 CHEMICAL ENGINEERING TRANSACTIONS VOL. 90, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Ale\u0161 Bernat\u00edk, Bruno Fabiano Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-88-4; ISSN 2283-9216 Improving the Management and Use of Operating Instructions for Process Safety Mats Lindgren IPS, The Swedish Process Safety Association, R\u00f6nngatan 12, 426 77 V\u00e4stra Fr\u00f6lunda, Sweden mats@ips.se", "mime": "application/pdf"}, {"id": "cet-12251", "words": "3379", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12251", "date": null, "keywords": "activity; crisis; exercise; interviews; management; observation; simulation; tool; training", "summary": "To develop an observation tool and methodology for sharing didactic and pedagogical knowledge on crisis observation 4. Thus, the first study, presented here, consisted of meetings with the organisers of crisis exercises of local major risk prevention and civil security departments.", "mime": "application/pdf"}, {"id": "cet-12252", "words": "2643", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12252", "date": null, "keywords": "accident; analysis; cases; factors; hofs; human; information; pattern; reports; tag; text", "summary": "Discussion and Conclusions A new framework has been proposed for analyzing the information of HOFs related accident reports. The NLP and HOFs categories have then been introduced to obtain the critical structure of HOFs related accidents.", "mime": "application/pdf"}, {"id": "cet-12515", "words": "3780", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12515", "date": null, "keywords": "efficiency; encapsulation; matrice; oeo; process; pul; results; solution; wpi; zein", "summary": "Consequently the sample is characterized as less desirable compared to the WPI:pul\u2013OEO encapsulation results. Oregano Essential oil (OEO) in particular, is extracted from the Mediterranean medicinal plant Origanum vulgare and is rich in such compounds (monoterpenes).", "mime": "application/pdf"}, {"id": "cet-12516", "words": "3010", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12516", "date": null, "keywords": "acetate; bar; cellulose; co2; electrospray; microparticles; particles; rut", "summary": "Figure 2: PSDs of CA/RUT particles produced using 0.5 wt% CA concentration, P=140 bar, E=30 kV. Figure 3: Particles of CA/RUT particles produced using 0.5 wt% CA concentration, RUT concentration equal to 5 wt% with respect to CA, P=140 bar, E=30 kV. With the aim of providing the effective encapsulation of RUT in CA particles and giving information about the chemical/physical interactions between RUT and CA, the IR spectra are reported in Figure 4. 112 Figure 4: IR spectra of CA powder (black line); RUT powder (red line); CA/RUT particles (blue line). Indeed, CA solutions were loaded with a poorly-water soluble compound, rutin (RUT), to improve its bioavailability.", "mime": "application/pdf"}, {"id": "cet-12517", "words": "2521", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12517", "date": null, "keywords": "collector; fibers; figure; pcl; sbs; solution; spinning", "summary": "FTIR results for PCL fiber fabricated by SBS and ES. 4. Conclusions PCL fibers oriented were fabricated successfully by solution blow spinning (SBS) and ES.", "mime": "application/pdf"}, {"id": "cet-12518", "words": "3130", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12518", "date": null, "keywords": "agitation; bioreactor; coli; polymerase; production; protein; rpm; taq; test", "summary": "The monitoring of microbial growth and its physiology allow to infer that the cells did not present stress when changing from an orbital shaking agitation to a continued stirred reactor, this system may favour oxygen mixing and transfer processes which may influence cell integrity 122 and increase in protein production (Bagagli and Sato 2013). Table 2: Protein production at Flask and Bioreactor level 1Average Production Enzyme; 2Percentage Improvement Production compared whit flask level 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1 2 3 4 5 6 7 8 9 O pt ic al D en si ty 5 95 (n m ) Time (h) Biomass Production at 350 rpm Test 1 Test 2 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1 2 3 4 5 6 7 8 9 O pt ic al D en si ty 5 95 (n m ) Time (h) Biomass Production at 220 rpm Test 1 Test 2 a) b) Agitation (rpm) Test NIC1 (\u00b5g/mL) ANIC2 (\u00b5g/mL) IC3 (\u00b5g/mL) AIC4 (\u00b5g/mL) 220 1 857 883.25 1352.66 1465.83 2 909.5 1579 350 1 1141 1197.75 3071 2973.5 2 1254.5 2876 Scale Agitation (rpm) APE1 (\u00b5g/mL) PIP2 (\u00b5g/mL)", "mime": "application/pdf"}, {"id": "cet-12519", "words": "2342", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12519", "date": null, "keywords": "aeration; co2; gas; mass; model; photobioreactor; transfer", "summary": "Figure 3 Volume fraction of CO2 and mass transfer rate in the aeration gas Due to the relatively small cross-sectional area and high air velocity, the concentration of CO2 in both phases is uniform. The purpose of the presented work is to develop a CFD model that is supplementary to mass transfer experiments in photobioreactors under CO2-enriched conditions.", "mime": "application/pdf"}, {"id": "cet-12520", "words": "3596", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12520", "date": null, "keywords": "food; production; rfw; substrates; vfas; waste", "summary": "Previous studies by Colombo et al. (Colombo et al., 2017) used the Organic Fraction of Municipal Solid Waste (OFMSW) for VFAs production and PHAs accumulation, obtaining the following yields: 151 g VFAs/kg This substrate-inoculum ratio was chosen following the work from Strazzera et al. (2018), in order to guarantee carbon availability to the inoculum and promote VFAs production.", "mime": "application/pdf"}, {"id": "cet-12521", "words": "4259", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12521", "date": null, "keywords": "alginate; content; drying; et al; food; maltodextrin; oil; phytosterols; solubility; stability; water", "summary": "Successfully, maltodextrin & alginate (80:1 ratio) mixture with water in oil emulsion (80:20 ratio) was applied in flaxseed oil using whey protein isolate as emulsifier agent (Fioramonti et al., 2017). Therefore, this study aims to develop from alginate/maltodextrins and optimization process to determine its effects on phytosterols content, oxidation stability, solubility, and water activity of palm oil in a freeze-drying process.", "mime": "application/pdf"}, {"id": "cet-12522", "words": "2960", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12522", "date": null, "keywords": "aeruginosa; bacteria; cell; energy; graphite; pseudomonas; sludge", "summary": "An emerging biotechnology application is the generation of energy using microbial fuel cells where microorganisms are used to convert the chemical energy in a substrate into electrical energy through metabolic activity by transferring electrons to an anode electrode which, when placed in circuit with a cathode chamber separated by a proton membrane, produces electrical energy (Revelo et al., 2013). Of the 4 microbial cells, it resulted that cell 4 generated more energy with 0.8960 V, then cell 3 with 0.8410 V, cell C1 with 0.8240 V and finally cell C2 with 0. 4920 V; that is when using in the anionic cell Pseudomonas aeruginosa bacteria in sludge substrate with wastewater, with aluminum electrode and in the cathodic cell a graphene electrode in copper sulphate solution, proved to be the most optimal in obtaining energy; therefore, microbial fuel cells allows obtaining bioelectricity while in this process decreases organic pollutants with the presence of carbon and nitrogen (Sawasdee V. and Pisutpaisal N., 2018) that in high levels are found in sewage 0.8410 0.7510 0.0000 0.2000 0.4000 0.6000 0.8000 1.0000 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 V o lt ag e (v )p H Time (Days) pH Energy (C3) Energy (C. control 6) 0.8960 0.7570", "mime": "application/pdf"}, {"id": "cet-12523", "words": "3102", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12523", "date": null, "keywords": "aeruginosa; biofilm; coli; cyanide; days; escherichia; treatment; water", "summary": "Figure 6: Reduction of cyanide with Pseudomona aeruginosa biofilm Figure 7: Cyanide reduction with Escherichia coli biofilm The physicochemical properties of the wastewater after being treated with the biofilms are presented in Table 6, the pH decreased due to the acids generated by the bacteria but remains in the optimal range for bacterial population growth. In gold mining waste with in vitro assays and using the bacteria pseudomonas fluorescens, pseudomonas alcaligenes, acinetobacter, enterobacter and Bacillus, reduced cyanide up to 2.8 mg CN/L (Huertas et al., 2010).", "mime": "application/pdf"}, {"id": "cet-12524", "words": "3367", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12524", "date": null, "keywords": "bed; biofilter; concentration; conditions; efficiency; gas; gases; h2s; nh3; removal", "summary": "However, the H2S and NH3 oxidation was affected by the daily changes in gas concentration. The increase of gases concentration at the last week of the dry season resulted in a gradual decrease of H2S and NH3 removal efficiency for both biofilters.", "mime": "application/pdf"}, {"id": "cet-12525", "words": "4542", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12525", "date": null, "keywords": "conditions; cycle; famine; feast; phase; run; sbr", "summary": "A strategy to favor the microbial selection consists in the alternance of excess (feast phase) and absence (famine phase) of the external carbon source. A common strategy to favour the microbial selection consists in the establishment of dynamic feeding conditions, such as the alternance of excess (feast phase) and deficiency (famine phase) of external carbon substrates, that induce growth kinetics limitations favoring the accumulation of PHA.", "mime": "application/pdf"}, {"id": "cet-12526", "words": "2731", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12526", "date": null, "keywords": "batch; ctpr10; fed; fermentation; induction; iptg; production; proteins; total", "summary": "tetA) was transformed by electroporation with a pET plasmid containing sequence encoding for CTPR10 protein. Table 2: Performance Summary Batch 36.5\u00b0C Fed-batch 36.5\u00b0C Fed-batch 36.5-20\u00b0C Fresh weight 54g 230g 484g Intracellular protein 4g 17.8g 45g Another parameter that has been evaluated is the percentage of induction of CTPR10 on the total of intracellular proteins produced.", "mime": "application/pdf"}, {"id": "cet-12527", "words": "3120", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12527", "date": null, "keywords": "alkaline; enzyme; extraction; food; isolate; meal; protein; protex; sunflower", "summary": "Sunflower protein surpasses many crops on the content of essential amino acids and it is the second only to soybean seed protein content of lysine, but it differs more high digestibility and absence of enzyme inhibitors of trypsin (Shchekoldina, T., & Aider, M., 2014). However it is shown that the use of sunflower protein can compensate for the lack of protein in food (Bautista, J. et al., 2000), and biological conversion of SFM processing products allows producing feed additives enriched with microbial protein (Bautista, J. et al., 1990).", "mime": "application/pdf"}, {"id": "cet-12528", "words": "2768", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12528", "date": null, "keywords": "curcumin; gellan; gum; hydrogels; pva; pvp", "summary": "Das et al. worked on drug and cell delivery systems to regenerate various tissues using gellan gum hydrogels showing promising results (Das and Giri 2020). The properties of gellan gum hydrogels blended with PVA or PVP containing curcumin were studied in view of a possible use in tissue engineering such as wound dressing.", "mime": "application/pdf"}, {"id": "cet-12529", "words": "3149", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12529", "date": null, "keywords": "days; degradation; figure; galleria; larvae; mellonella; molitor; polyethylene; polystyrene; tenebrio", "summary": "The research presents as a method of environmental biotechnology, the use of larvae of Tenebrio molitor and Galleria mellonella for the biodegradation of microplastics sample collected from the Azul beach in Ventanilla. The microplastics were then subjected for periods of 5, 10 and 15 days to larvae of Tenebrio molitor and Galleria mellonella, verifying that at 15 days there was a higher level of biodegradation of these, being 54.2% with 30 larvae of Tenebrio molitor for the Expanded Polystyrene and 34.4% with 30 Galleria mellonella Larvae for Polyvinyl Chloride.", "mime": "application/pdf"}, {"id": "cet-12530", "words": "4199", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12530", "date": null, "keywords": "codsol; fermentation; hrt; sludge; vfa", "summary": "In practice, low HRT selected for a mixed consortium with high fermentation rate, but less efficient in the conversion of the organic matter into VFA. These results suggested that low HRT selected for a mixed consortium with high fermentation rate, but less efficient in the conversion of the organic matter into VFA.", "mime": "application/pdf"}, {"id": "cet-12531", "words": "2676", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12531", "date": null, "keywords": "albumin; mixture; peg; phase; protein; rhsa; stability; water", "summary": "Also, they concluded that PEG does not induce protein conformal alterations in low polymer concentrations, indicating that it stabilizes the protein conformation while protein unfolding occurs in high PEG concentration. [\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f][\ud835\udc43\ud835\udc43\ud835\udc43\ud835\udc43\ud835\udc43\ud835\udc43] (2) Considering Cb = [AR:PEG], the following equation is obtained: 201 \ud835\udc3e\ud835\udc3e = \ud835\udc36\ud835\udc36\ud835\udc4f\ud835\udc4f (\ud835\udc36\ud835\udc36\ud835\udc4f\ud835\udc4f \u2013 \ud835\udc36\ud835\udc36\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f)(\ud835\udc36\ud835\udc36\ud835\udc4f\ud835\udc4f \u2013 \ud835\udc36\ud835\udc36\ud835\udc5d\ud835\udc5d\ud835\udc5d\ud835\udc5d\ud835\udc5d\ud835\udc5d) (3) where CrHSA and \ud835\udc36\ud835\udc36\ud835\udc5d\ud835\udc5d\ud835\udc5d\ud835\udc5d\ud835\udc5d\ud835\udc5d are the \ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f\ud835\udc5f and PEG analytical concentrations in solution.", "mime": "application/pdf"}, {"id": "cet-12532", "words": "3826", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12532", "date": null, "keywords": "barbecue; color; cricket; ecf; flour; food; protein; sauce", "summary": "Purchase intent (%) (After) BS-CF 0% 7.63\u00b11.35a 7.47\u00b11.36a 80.00 78.50 BS-CF 5% 7.31\u00b11.41a* 7.69\u00b11.11a* 68.50* 75.75* BS-CF 10% 6.47\u00b11.72b 6.23\u00b11.34b 52.50 54.25 BS-CF 15% 6.28\u00b11.71b Slovak J. Food Sci., 12, 431\u2013 437.", "mime": "application/pdf"}, {"id": "cet-12533", "words": "2546", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12533", "date": null, "keywords": "cancer; cell; chip; device; injection; insert; molding", "summary": "The chip\u2019s basic concept was to create a central square chamber radially connected to four outer wells via separate channels: this design allowed to seed cancer cells in the central chamber and different cell types from metastatic target tissues in the other wells. Material and methods 2.1 Design of the platform The device was designed with a geometry that would allow for reliable AM features reproduction, while also optimizing the study of cancer cells behavior and their interactions with other tissues.", "mime": "application/pdf"}, {"id": "cet-12534", "words": "3400", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-12534", "date": null, "keywords": "-350; -450; dechlorination; groundwater; rate; reactor", "summary": "Reductive dechlorination rate and the consequent coulombic efficiency was influenced by the presence of side reductive reactions like nitrate and sulphate reduction. Dehalorespiring microorganisms can reduce PCE and TCE via reductive dechlorination (RD) while aerobic dechlorinating microorganisms oxidized low chlorinated compound such as cis-dichloroethylene (cDCE) and vinyl chloride (VC) into non harmful products.", "mime": "application/pdf"}, {"id": "cet-12535", "words": "3610", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12535", "date": null, "keywords": "acetate; hydrogenophilic; production; rate; tests; woodii", "summary": "This partial pressure of hydrogen seems to have caused the increase in acetate production, with a rate of 9.7mg/Ld. Comparing the net acetate production rates at the two different pH values, it is interesting to highlight similar performances of the A.woodii in terms of acetate production, indeed, the two operational pH allowed for acetate production with different kinetics (Figure 1-C).", "mime": "application/pdf"}, {"id": "cet-12536", "words": "3534", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12536", "date": null, "keywords": "air; airflow; co2; culture; gas; loss; mass; microalgae; photobioreactor; pipe; transfer", "summary": "Reynolds number Friction factor Head loss (m) 1)From compressor outlet (6 mm inner diameter hose) 15 1,23 1.79 E-05 74.68 44.01 2,56 E+04 1.87E-2 615.70 20 1,20 1.81 E-05 74.03 43.64 2.48 E+04 1.88E-2 609.60 25 1,18 1.83 E-07 73.41 43.27 2.38 E+04 1.89E-2 600.46 2) From air pipe (20 mm inner diameter) 15 1,23 1.79 E-05 74.68 3,92 7.65 E+03 3.33E-2 5.60 20 1,20 1.81 E-05 74.03 3.88 7.37 E+03 3.34E-2 5.53 25 1,18 1.83 E-07 73.41 3.85 7.11 E+03 3.38E-2 5.50 Table 2: Total energy loss and pressure drop in the air distribution system. \ud835\udc8e (2) In this equation, v is air velocity calculated with the relation between the inner pipe area and the airflow measured with a flowmeter at different points as is shown in image B in Figure 1.", "mime": "application/pdf"}, {"id": "cet-12537", "words": "3672", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12537", "date": null, "keywords": "biofilm; degradation; dtab; medium; pet; pieces; plastics; sakaiensis; treatment", "summary": "This improves the exposure of PET pieces to the degradative enzymes. An anionic surfactant (Sodium dodecyl sulfate) as a pre-treatment for PET pieces in the presence of I. sakaiensis was studied by Furukawa et al. (2018).", "mime": "application/pdf"}, {"id": "cet-12538", "words": "4497", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12538", "date": null, "keywords": "cell; growth; lipid; lipolytica; medium; production; w29; wco; yarrowia; yeast", "summary": "The data from the flow cytometry analysis revealed that the higher amounts of lipid storage, in the form of lipid bodies, occur when Y. lipolytica W29 growth was carried out on 200 g/L WCO supplemented medium. 3. Results and discussion 3.1 Optimisation of high-throughput growth conditions Y. lipolytica W29 is known for its ability to grow on both hydrophilic and hydrophobic substrates.", "mime": "application/pdf"}, {"id": "cet-12539", "words": "3835", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12539", "date": null, "keywords": "activity; carbon; lipase; lipolytica; production; wco; yarrowia", "summary": "Contrarily to biomass production (Table 1), higher lipase activity was shown in supernatants derived from WCO- containing cultures compared to OO and FFA-containing cultures despite other findings that suggest a significant correlation between high level of biomass production and lipase activity (Corzo and Revah, 1999). Materials and Methods 2.1 Strains, Media and Culture Conditions Yarrowia lipolytica W29 (ATCC20460) strain was used in this work.", "mime": "application/pdf"}, {"id": "cet-12540", "words": "3205", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12540", "date": null, "keywords": "acids; cohnii; complexing; dha; fatty; fraction; lipid; urea", "summary": "Others fatty acids that showed significant concentrations were the ethyl esters 16:0 (21%), 14:0 (15%) and 18:1\ua64d9 (11%). The FAEE that resulted in the lowest percentages were those referring to fatty acids 10:0 (1.7%), 14:1 (0.36%), 16:1\ua64d9 (0.94%) and 18:0 (1.2%).", "mime": "application/pdf"}, {"id": "cet-12541", "words": "3859", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12541", "date": null, "keywords": "co2; compounds; doi; ethanol; extraction; fractions; gaditana; microalgae; solvent; vol", "summary": "\u2018Assessment of bio-oil extraction from Tetraselmis chui microalgae comparing supercritical CO2, solvent extraction, and thermal processing\u2019. This wide range of chemical compounds makes microalgae be considered as a potential source of applications, such as food ingredient, environmental use for water treatment, energy application in the production of biodiesel, or for the pharmaceutical sector through the application of their high value compounds (Levasseur et al., 2020).", "mime": "application/pdf"}, {"id": "cet-12542", "words": "3598", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12542", "date": null, "keywords": "biomass; consumption; glucose; growth; rate", "summary": "the biomass-related (due to \ud835\udc4c\ud835\udc65\ud835\udc60(\ud835\udc61)) glucose consumption rate for biomass kinetics properties, there is one more missing term (denoted as \ud835\udf0e\ud835\udc60\ud835\udc5c\ud835\udc59\ud835\udc62\ud835\udc61\ud835\udc52\ud835\udc60(\ud835\udc61)) in the balance of glucose concentration rate. A similar relationship involving the respiratory quotient served for kinetics equations by Lyubenova et al., 2020, pages 7-8. 2.2 Glucose consumption rate To better understand the secondary effect of OUR relative to the soluble contents that do not directly participate in biomass kinetics properties, the balance definition for glucose consumption rate is necessary.", "mime": "application/pdf"}, {"id": "cet-12543", "words": "4448", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12543", "date": null, "keywords": "acrylamide; calibration; fried; nir; oven; pizza; pizza samples; samples; spectra; validation; wood", "summary": "Moreover, for the calibration set, SEC and the R2 were 0.2244 and 0.9176, respectively for fried pizza samples and 0.1503 and 0.9219 respectively for wood oven cooked pizza samples. The optimized calibration was applied in scanning the NIR spectra of a new set of pizza samples to validate the created method.", "mime": "application/pdf"}, {"id": "cet-12544", "words": "2953", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12544", "date": null, "keywords": "aspect; gas; phb; production; ratio; transition; volume", "summary": "It can be noted that a difference has always been measured when working different configurations, thus implying the need for testing several geometries to find the one that allows to work at higher superficial gas velocities, and to obtain higher mass transfer rates. Scaling up bubble column reactors.", "mime": "application/pdf"}, {"id": "cet-12545", "words": "3908", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12545", "date": null, "keywords": "apt917; aptamer; biosensor; coli; detection; e. coli; figure", "summary": "Aptamer sequences were used to obtain an alignment using the Clustal W algorithm and then distance trees were constructed to show common characteristics in the aptamer sequences. Aptamer sequences were between 32 and 88 nucleotides, one of them was reported as RNA sequence (Ec3), and seven recognized whole cell of E. coli O157:H7 strain.", "mime": "application/pdf"}, {"id": "cet-12546", "words": "2900", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-12546", "date": null, "keywords": "antisolvent; gnih; hormone; particle; polymer; precipitation; process; size", "summary": "Conclusions In this preliminary work the formation of GnIH particles using the SAS technique and the influence of pressure and ratio drug/polymer on the average size of the obtained nanoparticles was achieved with a wide range of conditions, always under supercritical conditions. In this work, microparticles of GnIH were generated using supercritical antisolvent process (SAS) and subsequently the process of encapsulation of the compound with a biodegradable polymer, Pluronic F-127, was studied.", "mime": "application/pdf"}, {"id": "cet-12547", "words": "3329", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12547", "date": null, "keywords": "acetylation; atr; chitin; chitosan; degree; nanofibrils; rac; samples; sources; spectra", "summary": "Interesting products can be obtained by chitin deacetylation: chitin nanofibrils, that represent the crystalline whisker-like part of the material, and chitosan. A1020 RAC CHITI-A 7.256 13.643 0.53 CHITI-AB 8.768 19.184 0.45 CHITO-A 3.314 16.883 0.20 CHITO-AB 2.853 14.748 0.19 The RAC values obtained for chitin samples were more than two times the values calculated for corresponding chitosans, indicating the occurrence of extensive deacetylation passing from chitin to chitosan.", "mime": "application/pdf"}, {"id": "cet-12548", "words": "3281", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12548", "date": null, "keywords": "biomass; chlorella; microalgae; pozzillo; sewage; sludge; total", "summary": "The content of lipids is highest in the sample constituted by the only microalga Chlorella sp Pozzillo grown in sewage (31,66%\u00b13,37), followed by the 19,41%\u00b10,40 of the consortium of Chlorella sp. and AS and the 18,50%\u00b12,72 of AS. From Figure 1 it is possible to observe that Chlorella sp Pozzillo was able to growth in sewage and has a strong signal both through absorbance and fluorescence signals.", "mime": "application/pdf"}, {"id": "cet-12549", "words": "3529", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12549", "date": null, "keywords": "coffee; concentration; extraction; polyphenols; pulp; sodium; tannins", "summary": "Results show the possibility of valorizing coffee pulp by extracting tannins and other polyphenols and reveal possible uses of process streams. Coffee pulp comprises 30% of the dried fruit and between 40% and 50% of the wet fruit, thus it becomes the main residue of this industry.", "mime": "application/pdf"}, {"id": "cet-12550", "words": "4384", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12550", "date": null, "keywords": "fermentation; food; growth; mixing; nigro; process", "summary": "As shown in Table 1, bean fermentation led to a reduction of WAC and WAI, from values of 4.55 \u00b1 0.03 mL/g and 5.53 \u00b1 0.04 g/g, respectively, in RB samples, to 3.90 \u00b1 0.14 mL/g and 4.31 \u00b1 0.13 g/g, respectively, in FB24. Lactic acid fermentation of cereals, legumes, fruits, and vegetables-based foods can be considered a simple and economical way of improving their nutritional and functional qualities, making them healthy non-dairy carriers to prepare pre, pro, and postbiotic foods.", "mime": "application/pdf"}, {"id": "cet-12551", "words": "3747", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12551", "date": null, "keywords": "absorption; carbon; crude; et al; foams; materials; oil; resin; rvc; sponges; sucrose; water", "summary": "Table 1: Comparison between results of buoyancy and immersion tests Absorption percentage Float characteristics Test Celulose RVC1 PU RVC 2 Cellulose sponge3 PU Sponge4 Buoyancy in water 21% 29% 51% 640% 1 and 2 show minimum sinking 3 and 4 get submerged by 60% Immersion in water 35% 123% 857% 2340% 1 and 2 show buoyancy when strength is eliminated 3 and 4 stay submerged Buoyancy in water/crude oil 348% 781% 52% 1457% All samples get partially submerged Immersion in crude oil 402% 837% 348% 2019% All samples stay submerged When comparing the behavior of the tested materials, it can be seen that the RVC foams synthesized in this study have high buoyancy and low water absorption compared to the polymeric sponges. 3.2 Morphology of foams and templates Figure 3 shows the confocal micrographs of the polymeric sponges and RVC foams synthesized in this study.", "mime": "application/pdf"}, {"id": "cet-12552", "words": "3373", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12552", "date": null, "keywords": "analysis; biofilm; cell; conditions; flow; motility; shear; time; trajectories", "summary": "The development of a methodology for cell motility analysis as a function of the different stages of biofilm formation can be an innovative method to evaluate the influence of cell motility on biofilm morphology. To analyze bacterial cell motility in flow, a custom-made apparatus based on a commercial microfluidic rectangular flow cell (Ibidi Cell in Focus, \u00b5-Slide VI 0.1, 100 \u03bcm x 17 mm x1 mm) was used.", "mime": "application/pdf"}, {"id": "cet-12553", "words": "3723", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12553", "date": null, "keywords": "black; content; garlic; humidity; process; temperature; vol", "summary": "Black garlic is produced through the natural aging of whole ordinary garlic under controlled conditions of high temperature and humidity for several days, without any artificial treatments or additives. The optimal process conditions and time were determined and the time of the browning of the cloves have been reduced considerably; the tests to produce black garlic are carried out with different temperature values (70-80-90\u00b0C) and different relative humidity values (70-80-90% RH).", "mime": "application/pdf"}, {"id": "cet-12554", "words": "3116", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12554", "date": null, "keywords": "bagasse; cellulose; filter; hydrolysis; media; sugarcane", "summary": "Evaluaci\u00f3n de la obtenci\u00f3n de celulosa partiendo del buch\u00f3n de agua (eichhornia crassipes) mediante la hidrolisis b\u00e1sica y el proceso enzim\u00e1tico del hongo pleurotus ostreatus. https://colaboracion.dnp.gov.co/CDT/Conpes/Econ\u00f3micos/3874.pdf Dom\u00ednguez-Dom\u00ednguez, M. M., \u00c1lvarez-Castillo, A., Granados-Baeza, M., & Hern\u00e1ndez-Campos, F. (2012).", "mime": "application/pdf"}, {"id": "cet-12555", "words": "3607", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12555", "date": null, "keywords": "biomass; cultivation; fermenter; glucose; growth; microalgae; nitrogen; technique", "summary": "Conclusions This work shows how heterotrophic microalgae cultivation can be effectively conducted even without sterilization and aseptic procedures due to decoupled nutrient feeding. It is possible to reach higher cell densities and to use traditional fermenters for microalgae cultivation by using heterotrophic cultivation, which does not require CO2 (unlike photoautotrophic cultivation).", "mime": "application/pdf"}, {"id": "cet-12556", "words": "2600", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12556", "date": null, "keywords": "acid; esters; ethyl; fatty; liquid; mass; transesterification", "summary": "1. Introduction Biodiesel, a mixture of monoalkyl esters of biodegradable long chain fatty acids, contains insignificant amounts of sulphur and is nontoxic and renewable (Abdullah et al., 2017). Biomass conversion via the transesterification of palm oil sludge (POS) with methanol is a common route to synthesize fatty acid methyl esters (FAMEs) (Abdullah et al., 2017).", "mime": "application/pdf"}, {"id": "cet-12557", "words": "3324", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-12557", "date": null, "keywords": "carbon; coconut; color; doi; endocarp; et al; removal; treatment; turbidity; water", "summary": "Water color is an important parameter in the assessment of water quality (Chen et al., 2021; Zobkov and Zobkova, 2020). The high specific surface area and pore volume, achieved with acid activation, allows to obtain good adsorbent materials, ideal for water treatment (Hoa et al., 2006).", "mime": "application/pdf"}, {"id": "cet-12558", "words": "8882", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12558", "date": null, "keywords": "analysis; chemical; covid-19; energy; engineering; environmental; et al; exchanger; fan; footprints; heat; integration; j.j; kleme\u0161; kleme\u0161 et; kleme\u0161 j.j; optimisation; p.s; pinch; pres; process; transactions; varbanov; wang; waste; water", "summary": "Since the very successful article developed by \u010cu\u010dek et al. (2012) that reviewed the environmental footprint analysis tools for monitoring impacts on sustainability, the environmental footprints relevant studies from the PRES team have been widely extended, including water footprint assessment (Jia et al., 2021), energy footprint analysis (Kleme\u0161 et al., 2020b), carbon emissions footprint quantification (Fan et al., 2018), waste footprint exploration (Kleme\u0161 et al., 2021a), and Carbon-Energy-Water (CEW) nexus discussions (Wang et al., 2021d). Kleme\u0161 et al. (2017) have analysed the twenty years of PRES, Kleme\u0161 et al. (2021a) twenty- DOI: 10.3303/CET2294001 Paper Received: 04 June 2022;", "mime": "application/pdf"}, {"id": "cet-12559", "words": "3740", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-12559", "date": null, "keywords": "case; co2; gas; loop; process; pulp; reactor; rwgs; stream", "summary": "Table 1: Definition of evaluated cases with integration in a pulp mill (CL: closed-loop, OL: open-loop, RWGS: reverse water gas shift process, CO2E: CO2 electrolysis) The paper presents a study of the integration of FT process into a pulp mill.", "mime": "application/pdf"}, {"id": "cet-12560", "words": "3276", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12560", "date": null, "keywords": "analysis; data; images; method; results; satellite; sensing; soil; yield", "summary": "As input functions into the equation are used: weather data, yield data, spectral indices, and agrochemical indicators. As input data, we used spring wheat yield data, agrochemical data for the previous year, as well as meteorological data for the experimental site.", "mime": "application/pdf"}, {"id": "cet-12561", "words": "3344", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-12561", "date": null, "keywords": "carrier; chemical; clc; combustion; energy; looping; oxygen; plant; power; storage", "summary": "This variation of the operational factor was considered for the techno-economic assessment of flexible natural gas chemical looping combustion power plant. Table 3: Key performance indicators for natural gas CLC power plant (base load operation)", "mime": "application/pdf"}, {"id": "cet-12562", "words": "4296", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12562", "date": null, "keywords": "approach; carbon; chemical; energy; engineering; et al; friedler; graph; process; supply; systems; tan", "summary": "Chin H.H., Foo D.C.Y., Lam H.L., 2019, Simultaneous water and energy integration with isothermal and non- isothermal mixing \u2013 A P-graph approach, Resources, Conservation and Recycling, 149, 687\u2013713. Chong F.K., Lawrence K.K., Lim P.P., Poon M.C.Y., Foo D.C.Y., Lam H.L., Tan R.R., 2014, Planning of carbon capture storage deployment using process graph approach, Energy, 76, 641\u2013651. A study used P-graph to cluster and synthesize regional energy supply chains using biomass (Lam et al., 2010).", "mime": "application/pdf"}, {"id": "cet-12563", "words": "2090", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12563", "date": null, "keywords": "generation; new; patterns; power; wind; zealand", "summary": "Global Wind Atlas is used for showing wind patterns and WRPLOT software plots wind class of sites. Methods Westerly wind patterns prevail in most parts of New Zealand.", "mime": "application/pdf"}, {"id": "cet-12564", "words": "3412", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-12564", "date": null, "keywords": "carbon; dmaic; emissions; energy; methodology; neutrality; process; step; \u00fc \u00fc", "summary": "This study addresses the research question \u2018What methodologies and modelling tools do industrial organisations use to plan and subsequently achieve carbon emissions neutrality?\u2019 For instance, The European Cement Association\u2019s 2050 roadmap focusses on measures to reduce GHG emissions of each of its five processes (CEMBUREAU, 2020); however, these are presented as individual steps for each process rather than a step-by-step pathway to carbon emissions neutrality.", "mime": "application/pdf"}, {"id": "cet-12565", "words": "3900", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12565", "date": null, "keywords": "chemical; contaminant; energy; engineering; plastic; problem; quality; recycling; sink; source; synthesis; waste", "summary": "It is estimated that the total volume of plastic waste can be reduced by 78% by 2040 using established technologies if only these options can be deployed optimally (Lau et al., 2020). Optimisation models have thus been proposed in recent literature to aid in managing plastic waste based on reverse supply chain concepts (Chaudhari et al., 2021).", "mime": "application/pdf"}, {"id": "cet-12566", "words": "3730", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12566", "date": null, "keywords": "biodiesel; chain; costs; criterion; optimization; production; supply", "summary": "3.2 Modeling of biodiesel/diesel SC economic performance The economic assessments are the costs related to the plant, which include the total investment costs for biodiesel production capacity (B100) and the operation of the SC. \ud835\udc47\ud835\udc37\ud835\udc36\ud835\udc61 = \ud835\udc47\ud835\udc3c\ud835\udc36\ud835\udc61 + \ud835\udc47\ud835\udc43\ud835\udc36\ud835\udc61 + \ud835\udc47\ud835\udc47\ud835\udc36\ud835\udc61 + \ud835\udc47\ud835\udc47\ud835\udc34\ud835\udc4b\ud835\udc35\ud835\udc61 \u2212 \ud835\udc47\ud835\udc3f\ud835\udc61, \u2200\ud835\udc61, \ud835\udc61 \u2208 \ud835\udc47 (3) where TDCt the total costs of biodiesel/diesel SC, ($/y); TICt the total investment costs for biodiesel/diesel SC production capacity according to the period of operation and the purchase of biorefineries, ($/y); TPCt the production costs in biodiesel production (B100), ($/y); TTCt the total transportation costs, ($/y); TTAXBt the GHG emissions tax charged according to the total CO2, generated during the operation of the SC ($/y); TLt the government incentives for biodiesel production and consumption (B100), ($/y). Avami, A., 2012, A model for biodiesel supply chain: A case study in Iran, Renewable and Sustainable Energy Reviews, 16(6), 4196-4203.", "mime": "application/pdf"}, {"id": "cet-12567", "words": "3373", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12567", "date": null, "keywords": "design; factor; heat; plate", "summary": "Although research has been focused on improving the thermohydraulic performance of heat transfer plates, there is a need for techniques that allow the development of better prediction models of the Colburn factor (j) and friction factor (f) in plate heat exchangers, as well as design techniques based on the use of generalized correlations. The methodology uses the limiting solutions model to generate correlations that give improved predictions of the friction and Colburn factors by incorporating the thermohydraulic data of the laminar and turbulent region for heat transfer plates into a single conjugated expression.", "mime": "application/pdf"}, {"id": "cet-12568", "words": "3657", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12568", "date": null, "keywords": "case; drop; heat; performance; pressure; promoters; transfer; tube", "summary": "Mexico picon@ugto.mx As a result of the wide use of tubular heat exchangers in industry and considering the main heat transfer and friction limitations they possess compared to new technologies, heat transfer promoters of different shapes have appeared in recent years to improve their thermohydraulic performance. Dur\u00e1n-Plazas L.P., Pic\u00f3n-N\u00fa\u00f1ez M., Minchaca-Mojica J.I., 2021, Selection of heat transfer promoters for heat exchanger retrofit, Chemical Engineering Transactions, 88, 523-528.", "mime": "application/pdf"}, {"id": "cet-12569", "words": "3617", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12569", "date": null, "keywords": "biodiesel; carlo; chain; fame; microalgae; model; study; supply; uncertainties; usd", "summary": "The Monte Carlo simulation was computed using Microsoft Excel software by randomizing the uncertainties (microalgae growth productivity, M\ud835\udc43\ud835\udc5f\ud835\udc5c\ud835\udc51, biodiesel selling price, C\ud835\udc39\ud835\udc34\ud835\udc40\ud835\udc38, microalgae strain purchasing price, C\ud835\udc40\ud835\udc34, and microalgae FAME biodiesel productivity, P\ud835\udc40\ud835\udc34) according to their historical statistical data. One of the common approaches to perform stochastic optimization is via Monte Carlo simulation model.", "mime": "application/pdf"}, {"id": "cet-12570", "words": "3102", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12570", "date": null, "keywords": "ann; capture; co2; energy; flue; gas; heat; model; pcc; process", "summary": "Figure 5: PCC process simulation results under selected condition 83 4. While for flue gas, the energy requirement is large (5.12 MJ/kg CO2) due to its low CO2 concentration and low pressure (Zhang et al., 2018).", "mime": "application/pdf"}, {"id": "cet-12571", "words": "4040", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12571", "date": null, "keywords": "allocation; assessment; cycle; environmental; et al; lca; life; plastic; recycling", "summary": "This study aims to summarise the Life Cycle Assessment (LCA) methods that consider the cascade utilisation and upcycling of a product which will also apply to the case of plastic recycling. In commenting on the future of plastic recycling, Garcia and Robertson (2017) highlight the importance of new low- energy catalysts and the development of decontamination techniques.", "mime": "application/pdf"}, {"id": "cet-12572", "words": "3624", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12572", "date": null, "keywords": "carbon; coalition; electricity; energy; game; p2p; players; renewables", "summary": "Figure 1: Methodology flowchart for game theory approach for P2P energy trading energy planning 4. Figure 2: (a) Schematic diagram of cooperative P2P energy trading model between players; (b) Daily energy usage of three players 94 Table 1: Cost factor for each time interval (Tenaga Nasional Berhad-Enhanced Time of Use (TOU) Tariff Scheme, 2014)", "mime": "application/pdf"}, {"id": "cet-12728", "words": "3193", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-12728", "date": null, "keywords": "catalyst; cus; degradation; gl-1; light; rhodamine; water; zns", "summary": "Byrappa K., Subramani A.K., Ananda S., Rai K.M., Dinesh R., Yoshimura M., 2006, Photocatalytic degradation of rhodamine B dye using hydrothermally synthesized ZnO, Bulletin of Materials Science, 29(5), 433-438. Figure 5: Effect of pH on photocatalytic degradation of rhodamine B 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 3 0 6 0 9 0 1 2 0 1 5 0 1 8 0 CO N CE N TR AT IO N (C /C O ) TIME (MIN) 5g/L 7.5g/L 10g/L 15g/L 0 0.2 0.4 0.6 0.8 1 0 30 60 90 120 150 180 210 240 270 Co nc en tr at io n (C /C o) Time (min) pH 1 pH 3 pH 5 Ph 7 pH 9 pH 11 pH 13 1031 4.", "mime": "application/pdf"}, {"id": "cet-12729", "words": "3871", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12729", "date": null, "keywords": "bio; catalyst; oil; pressure; processing; pyrolysis; temperature", "summary": "The composition of bio-oil is presented by mainly oxygen-containing compounds (97.2 and 99.5 wt. % for birch and pine wood sawdust respectively) (see Figure 2). a b a b 1035 3.2 Model compound conversion To determine the optimal conditions for the co-processing of bio-oil and petroleum", "mime": "application/pdf"}, {"id": "cet-12730", "words": "3682", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12730", "date": null, "keywords": "farming; figure; graph; loop; operation; synthesis; system; units", "summary": "This method constitutes a powerful tool for the assessment of systems for VF integration that enhance the sustainability of agricultural activity. Figure 4: Initial structure for a single period of case study of closed-loop system for VF integration These units are selected since they are regarded as systems whose inputs or outputs may be seized by VF, or other members of the closed loop and the structure is created in P-Graph Studio.", "mime": "application/pdf"}, {"id": "cet-12731", "words": "3835", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12731", "date": null, "keywords": "cooling; energy; model; network; planning; treatment; units; water; \ud835\udc4e\ud835\udc4e\ud835\udc4e\ud835\udc4e\ud835\udc4e\ud835\udc4e", "summary": "A recent study by Zhou et al. (2021) proposed MINLP model to design water network considering seasonal changes in water demands and supplies from multiple water resources. A mixed-integer nonlinear programming model (MINLP) was developed earlier by Alnouri et al. (2015) to design optimal water integration networks.", "mime": "application/pdf"}, {"id": "cet-12732", "words": "3938", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12732", "date": null, "keywords": "chargers; charging; model; time; university; vehicles; \ud835\udc3d\ud835\udc3d,\u2200", "summary": "Huang Y., Zhou Y., 2015, An optimization framework for workplace charging strategies. In the first scenario 95.98 % of total charging demand was satisfied.", "mime": "application/pdf"}, {"id": "cet-12733", "words": "3541", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12733", "date": null, "keywords": "activity; equation; liquid; mass; nonlinear; parameters; surface; waves", "summary": "Accepted: 02 July 2022 Please cite this article as: Yegenova A., Izmbergenov N., Sultanov M., Brener A., 2022, Computer Simulation of Nonlinear Waves in Liquid Films with Surface Activity and Mass Sources at the Bottom, Chemical Engineering Transactions, 94, 1057-1062 DOI:10.3303/CET2294176 CHEMICAL ENGINEERING TRANSACTIONS VOL. 94, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Yee Van Fan, Ji\u0159\u00ed J. Kleme\u0161, Sandro Ni\u017eeti\u0107 Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-93-8; ISSN 2283-9216 Computer Simulation of Nonlinear Waves in Liquid Films with Surface Activity and Mass Sources at the Bottom Aliya Yegenovaa, Nurjan Izmbergenova, Murat Sultanovb, Arnold Brener a,* aAuezov University of South Kazakhstan, Tauke Khan 5, Shymkent, Kazakhstan bAkhmet Yassawi University, Turkistan arnold.brener@auezov.edu.kz The paper's primary goal and scientific contribution is the mathematical simulation of nonlinear surface waves in moving thin layers of perfect liquids with accounting for the combined influence of mass sources and surface activity at the free-moving boundaries. The intensity of small surface waves of high frequency, the so-called ripple, increases essentially too.", "mime": "application/pdf"}, {"id": "cet-12734", "words": "3401", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-12734", "date": null, "keywords": "chain; energy; food; food waste; production; slovenia; supply; waste", "summary": "About 125 kt of food waste was generated, of which the majority (90 kt or 72 %) was plant food waste. Food waste is divided into edible and inedible parts, and conversion factors for biogas or biochar are estimated.", "mime": "application/pdf"}, {"id": "cet-12735", "words": "3886", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12735", "date": null, "keywords": "analysis; cost; criteria; decision; diesel; energy; fuzzy; model; planning; systems; tool", "summary": "The soft computing tool named Energy Fuzzy-On is a tool for aiding the integration of hybrid sustainable renewable energy systems. Due to this, sustainable, optimal and safe operations should be included in hybrid renewable energy systems, i.e., the integration of several types of energy generation equipment such as electrical energy generators, electrical energy storage systems, and renewable energy sources (Nazari-Heris and Mohammadi Iyatloo, 2018).", "mime": "application/pdf"}, {"id": "cet-12736", "words": "3537", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-12736", "date": null, "keywords": "analysis; farm; fertiliser; food; phosphate; phosphorous; production; raw; salikneta; septage; struvite; treatment; wastewater", "summary": "The constant annual increase in the global demand for food production is taking a toll on the current global supply of such commodity fertilisers and phosphate rocks. Table 4: Effects of different fertilisers on the yield components of tomato, eggplant, cabbage, and mustard Treatment Yield per plot in kg Tomato Eggplant Cabbage Mustard Treatment 1 (No fertiliser) 3.26b 8.99b 0.89b 1.43b Treatment 2 (Ammonium phosphate) 5.12a 13.13a 1.84a 2.68a Treatment 3 (Recycled P-fertiliser) 5.18a 11.69a 1.53a 2.58a a,bMeans with different letters differ significantly at the 5 % level using Tukey HSD 3.4 Engagement with the farmers An online training which was organized by the Society for the Conservation of Philippine Wetland was held with the Filipino farmers from Arayat, Pampanga and Victoria, Laguna to increase the level of awareness on the impact of agriculture on the environment and the interrelationship of sanitation and nutrient pollution to water bodies.", "mime": "application/pdf"}, {"id": "cet-12737", "words": "3445", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12737", "date": null, "keywords": "ahp; dam; graph; manila; mwss; supply; sustainability; water", "summary": "Overall, the integrated P-graph \u2013 AHP framework showed its utility in planning for sustainability to identify and implement long-term projects, notably in water supply networks. The case study illustrated how P-graph can generate optimal water supply networks through mathematical modeling.", "mime": "application/pdf"}, {"id": "cet-12738", "words": "3972", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12738", "date": null, "keywords": "bio; content; cost; dme; gasification; hydrochar; process; production; sewage; sludge; syngas", "summary": "The aim of this work is to propose and investigate a novel route for bio-DME synthesis, starting from the conversion of sewage sludge to hydrochar, modelling its conversion to bio-syngas, and finally evaluating the economic feasibility of a bio-DME production plant. Higher O2 content provides better syngas yield and leaves a lower quantity of heavy hydrocarbons in the final product but the gaseous product has a lower H2/CO ratio, which is not optimal for bio-DME synthesis (Inayat et al., 2017).", "mime": "application/pdf"}, {"id": "cet-12739", "words": "3323", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12739", "date": null, "keywords": "cell; data; model; multiphysics; nas; planar; temperature", "summary": "Conclusions In this work, a multiphysics model for high temperature planar NaS batteries were formulated by extending models for tubular NaS batteries. In this work, a multiphysics model of a high-temperature planar NaS battery was formulated based on existing models for tubular NaS cells.", "mime": "application/pdf"}, {"id": "cet-12740", "words": "5097", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12740", "date": null, "keywords": "biodiesel; brake; chuah; diesel engine; diesel fuel; emission; engine; fuel; oil; performance; waste", "summary": "Using biodiesel mix fuels resulted in greater brake specific fuel consumption, particularly at low engine speeds and under partial load situations The brake thermal efficiency of biodiesel blend fuels was found to be slightly higher compared to diesel fuel at 50 and 100 % load and the opposite trend was found at 25 % load. The brake thermal efficiency, carbon monoxide, unburned hydrocarbon and smoke opacity were found to be lower in the case of biodiesel blend fuels compared to diesel fuel.", "mime": "application/pdf"}, {"id": "cet-12741", "words": "3332", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12741", "date": null, "keywords": "absorption; capacity; co2; concentration; gas; pls; temperature; tepa; zif-8", "summary": "When the effect of different parameters on CO2 absorption capacity was investigated, it was found that the optimal adsorption temperature was 60 \u00b0C, and the optimal concentration of the main units was7.5 wt%. CO2 absorption capacity is affected by pressure and temperature, and it is generally suitable for high pressure and low temperature.", "mime": "application/pdf"}, {"id": "cet-12742", "words": "4052", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12742", "date": null, "keywords": "case; constraints; emissions; model; nets; portfolio; resource; study; technologies", "summary": "Migo-Sumagang M.V., Aviso K., Tapia J.F., Tan R.R., 2021, A superstructure model for integrated deployment of negative emissions technologies under resource constraints, Chemical Engineering Transactions, 88, 1\u2013 6. Tan R.R., Almario E.M.R., Aviso K.B., Cruz J.B., Promentilla M.A.B., 2019, A methodology for tracing the rank invariance region in multi-criterion selection problems: application to negative emission technologies, Process Integration and Optimization for Sustainability, 3: 533\u2013536.", "mime": "application/pdf"}, {"id": "cet-12743", "words": "3404", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12743", "date": null, "keywords": "chemical; education; engineering; model; online; optimization; pandemic; process; programming; students", "summary": "Optimization with MP models has now been integrated into mainstream chemical engineering education. The important role of integer variables in MP models was also demonstrated using problems in reliability engineering (Luus, 1975) and pollution reduction portfolio optimization (Kantardgi et al., 2006).", "mime": "application/pdf"}, {"id": "cet-12744", "words": "4019", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12744", "date": null, "keywords": "energy; exchanger; generation; heat; hen; network; power", "summary": "min\ud835\udc38\ud835\udc38\ud835\udc38\ud835\udc38 = \ufffd\ufffd\ufffd\ud835\udc65\ud835\udc65\ud835\udc5a\ud835\udc5a,\ud835\udc5f\ud835\udc5f,\ud835\udc61\ud835\udc61 \ud835\udf02\ud835\udf02 \u2219 \ud835\udc3f\ud835\udc3f\ud835\udc3f\ud835\udc3f\ud835\udc3f\ud835\udc3f\ud835\udc5a\ud835\udc5a\ufffd \ufffd \ud835\udc61\ud835\udc61 \u2219 \ud835\udc47\ud835\udc47\ud835\udc36\ud835\udc36\ud835\udc47\ud835\udc47\ud835\udc5a\ud835\udc5a \u2219 3.67 \u2219 \ud835\udc5f\ud835\udc5f \ud835\udc46\ud835\udc46\u210e\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc5c\ud835\udc5f\ud835\udc5f\ud835\udc5c\ud835\udc5c (2) Eq(2) is adapted from Shenoy (1995). niyi.isafiade@uct.ac.za This work presents a new method for integrating various renewable energy feedstock sources with the utility systems of combined heat and power generation hubs and heat exchanger networks (HENs).", "mime": "application/pdf"}, {"id": "cet-12745", "words": "2799", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-12745", "date": null, "keywords": "classification; collection; cost; msw; supply; transfer; transportation; treatment; waste", "summary": "Waste classification can greatly improve the efficiency of waste treatment and ensure the healthy development of cities. In the cost of waste treatment, the cost of the collection and transportation accounts for a considerable proportion.", "mime": "application/pdf"}, {"id": "cet-12746", "words": "3250", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12746", "date": null, "keywords": "gold; leaching; planning; process; recovery; table; waste", "summary": "Sampling of point dependences of gold recovery into productive solution was made by averaging the experimental results corresponding to each level (1-5). No. of experience \u04451 \u04452 \u04453 \u04454 \u04455 \u0423G 1 12 50 25 5 30 12.2 2 12 150 45 15 60 15.6 3 12 100 35 10 45 13.4 4 12 200 60 20 240 57.4 5 12 200 60 20 120 44.6 6 20 50 45 10 240 48.5 7 20 150 35 20 120 44.4 8 20 100 60 20 30 16.7 9 20 200 60 5 60 19.1 10 20 200 25 15 45 12.3 11 16 50 35 20 60 16.1 12 16 150 60 5 45 18.8 13 16 100 60 15 240 43.2 14 16 200 25 10 120 32.6 15 16 200 45 20 30 12.4 16 24 50 60 15 120 45.4 17 24 150 60 10 30 17.2 18 24 100 25 20 60 13.1 19 24 200 45 20 45 16.6 20 24 200 35 5 240 49.2 The point dependencies of gold recovery into the productive solution were sampled by averaging the experimental results corresponding to each level (Table 5).", "mime": "application/pdf"}, {"id": "cet-12747", "words": "3871", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12747", "date": null, "keywords": "capital; cost; criteria; density; efficiency; energy; power; storage; \ud835\udc47\ud835\udc47 \ufffd", "summary": "Energy storage technologies (EST) that are available in the market and in the process of development have their specific strengths and weaknesses. To achieve the committed target in COP26, governments around the world should address policy and implementation challenges for renewable and include investment in energy storage technologies (ESTs).", "mime": "application/pdf"}, {"id": "cet-12748", "words": "3558", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12748", "date": null, "keywords": "anp; bocr; criteria; decision; energy; framework; making; planning; policy; step; weights", "summary": "The proposed concept/idea ultimately provides excellent benefits of establishing a model that can help a country make strategic energy policy decisions. In the end, the proposed concept or idea is a great way to set up a model that can be used to help a country make essential energy policy decisions.", "mime": "application/pdf"}, {"id": "cet-12749", "words": "3603", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12749", "date": null, "keywords": "capacity; cost; energy; gas; h-1; hydrogen; price; production; reforming; smr; units", "summary": "Thomas et al. (2009) compared central and distributed hydrogen production costs. This paper provides an overview of the principal published data of equipment manufacturers and essential scientific articles on both technical and economic issues of hydrogen production for these purposes.", "mime": "application/pdf"}, {"id": "cet-12750", "words": "3220", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12750", "date": null, "keywords": "chemical; energy; methanol; process; reaction; solution; structure; synthesis", "summary": "The design of chemical reactors is the heart of process synthesis, wherein the main goal is to generate the desired component or chemical (Foo et al., 2005). Different factors such as waste products, energy, and raw material consumption are considered for process synthesis.", "mime": "application/pdf"}, {"id": "cet-12751", "words": "3514", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12751", "date": null, "keywords": "data; gasoline; model; parameters; prediction; process; product; refining; ron; variables", "summary": "This paper proposes a novel intelligent framework for RON prediction of refining products and increasing product RON by optimising operation parameters. i i y y R R y y = = \u2212 = \u2212 \u2212\u221e \u2264 \u2264 \u2212 \u2211 \u2211 (5) Where \ud835\udc66\ud835\udc66\ud835\udc5a\ud835\udc5a, \ud835\udc66\ud835\udc66\ufffd\ud835\udc5a\ud835\udc5a and \ufffd\u0304\ufffd\ud835\udc66\ud835\udc5a\ud835\udc5a are observed values, predicted values, and average values of RON product.", "mime": "application/pdf"}, {"id": "cet-12752", "words": "2290", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12752", "date": null, "keywords": "concrete; f.c; fibers; mpa; palm; strength", "summary": "This research examines potential use of date palm fibers as a natural reinforcement material for concrete. Ismail and Hashim (2008) noted that an addition of date palm fibers significantly reduces the workability of the mix if the fiber length is greater than 5 cm.", "mime": "application/pdf"}, {"id": "cet-12753", "words": "4023", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-12753", "date": null, "keywords": "colour; feed; filtration; hydrolysates; membrane; permeate; process; starch; sugar; syrup", "summary": "As expected, the membrane with the highest MWCO or loose UF membrane obtained the highest permeate flux with a value of 105.4 \u00b1 13.3 L/m2.h, followed by the tight UF membrane with a value of 77.4 \u00b1 11.7 L/m2.h, and finally, the membrane with the lowest MWCO or NF membrane had the lowest permeate flux with 51.2 \u00b1 6.2 L/m2.h. This study proposed an integrated membrane system and using a theoretical balance was found that the colour of starch hydrolysates could be reduced to 53.6 % using three different steps of membrane filtration.", "mime": "application/pdf"}, {"id": "cet-12754", "words": "3980", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12754", "date": null, "keywords": "analysis; binder; biomass; briquette; charcoal; content; peanut; production; shell; wt.%", "summary": "ISBN 978-88-95608-93-8; ISSN 2283-9216 Charcoal Briquette Production from Peanut (Arachis hypogaea L.) Shells using Cornick Industry Wastewater as Binder through a Torrefaction Process Roselle Y. Mamuada,b, Joyce H. Racuyaa, Angelo Earvin Sy Choib,* aDepartment of Chemical Engineering, College of Engineering, Mariano Marcos State University, City of Batac, 2906, Ilocos Norte bDepartment of Chemical Engineering, De La Salle University, 2401 Taft Ave, Manila 0922, Philippines angelo.choi@dlsu.edu.ph The torrefaction process was applied to the peanut shells to produce charcoal briquette using Cornick industry wastewater as a binder and a charcoal briquetting press. The characteristics of the charcoal briquettes derived from peanut shells and Cornick wastewater as a binder were compared to the standards for charcoal briquettes used in grilling, cooking, and for electricity generation.", "mime": "application/pdf"}, {"id": "cet-12755", "words": "3017", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12755", "date": null, "keywords": "cop; exergy; heat; temperature; \u0307 \ufffd; \ufffd \u0307", "summary": "One option for improving thermal efficiency in heat pump cycles is to match temperature profiles of the refrigerant with the heat source and heat sink fluids as closely as possible. The COP relates the condensing heat flow, \ufffd\u0307\ufffd\ud835\udc44\ud835\udc36\ud835\udc36 to the consumed electric power of the compressor, \ud835\udc4a\ud835\udc4a\ud835\udc60\ud835\udc60\u0307 \ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36 = \ufffd\u0307\ufffd\ud835\udc44\ud835\udc36\ud835\udc36 \ufffd\u0307\ufffd\ud835\udc4a\ud835\udc36\ud835\udc36 (5) The Lorenz COP is the maximum theoretical COP that can be achieved when the heat source and heat sink have variable temperatures.", "mime": "application/pdf"}, {"id": "cet-12756", "words": "3660", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12756", "date": null, "keywords": "components; ground; literature; research; resilience; systems; ugvs; vehicles", "summary": "Autonomous vehicle systems can be considered the most promising solutions in the field of dual-purpose transportation and locomotion. These factors appear both in the hardware and software domains of autonomous ground vehicle systems, arising research questions linked to resilience as follows (Bagchi et al., 2020).", "mime": "application/pdf"}, {"id": "cet-12757", "words": "3983", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-12757", "date": null, "keywords": "analysis; central; ems; energy; factors; grid; management; pestle; system", "summary": "In recent years, energy management system (EMS) research has gotten a lot of attention. However, more advanced / new systems are beginning to emerge worldwide, laying the groundwork for decentralized energy systems (Chartier et al., 2022).", "mime": "application/pdf"}, {"id": "cet-12758", "words": "2988", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12758", "date": null, "keywords": "acid; amd; drainage; limestone; lmw; treatment", "summary": "Since AMD persists long after abandonment of mine operations, passive treatment system may provide the long-term solution that can be made sustainable using materials that are cheap and derived from waste. Passive treatment systems are viewed as a method that is better economically because they do not need continuous chemical inputs like in active treatment systems (Kefeni et al., 2017).", "mime": "application/pdf"}, {"id": "cet-12759", "words": "3560", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-12759", "date": null, "keywords": "adsorbent; adsorption; capacity; clay; model; ni(ii; spc", "summary": "For the calculation of adsorption capacity and removal percentage, Eq(1) and Eq(2), were used as follows; \ud835\udc5e\ud835\udc5e\ud835\udc61\ud835\udc61 = \ud835\udc36\ud835\udc360 \u2212 \ud835\udc36\ud835\udc36\ud835\udc61\ud835\udc61 \ud835\udc5a\ud835\udc5a \u00d7 \ud835\udc49\ud835\udc49 (1) \ud835\udc45\ud835\udc45 = \ud835\udc36\ud835\udc360 \u2212 \ud835\udc36\ud835\udc36\ud835\udc61\ud835\udc61 \ud835\udc36\ud835\udc360 \u00d7 100 (2) 1214 = qmL KL Ce 1 + KL Ce KL (L/mg) 0.0548 qmL(mg/g) 21.10 R2 0.9631 RMSE 1.5070 Freundlich qe = KFCe 1 n\ud835\udc39\ud835\udc39 KF (mg/g)(mg/L)-1/nF 4.9420 nF 3.859 R2 0.9959 RMSE 0.5052 Sips qe = qmsKSCe 1 nS 1 + KSCe 1 nS qms (mg/g) 52.58 KS (mg/L)-1/ns 0.0856 nS 0.3654 R2 0.9971 RMSE 0.4666 *qe: Equilibrium adsorption capacity (mg/g), K1: pseudo-first order kinetic constant, K2: pseudo-second order kinetic constant, h: initial sorption rate.", "mime": "application/pdf"}, {"id": "cet-12760", "words": "3835", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12760", "date": null, "keywords": "approach; carbon; cascade; ccs; emission; energy; nets; period; planning; pwh; table", "summary": "Table 2 and Table 3 includes raw (Ck, \u2211 FDt,jj , FNPt,b, \u2206Ck), process (FXt,i, FTR,k, \u2206FTR,k, FAR,k, FAlt,k) and result (FNt,k, \u03b4t(k), \u03b5t(k)) data for each of two periods (t1 and t2) of low carbon energy planning. The results show that multi- period low-carbon energy planning can achieve better deployment of resources and technologies and reduce the pressure to reduce carbon emissions in the early stages of planning.", "mime": "application/pdf"}, {"id": "cet-12761", "words": "3690", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-12761", "date": null, "keywords": "analysis; cold; consumption; crude; energy; exchanger; heat; naphtha; pinch; temperature", "summary": "Structural changes of the distillation unit are more complex because they require higher capital investment and more installation time than structural changes of the HEN, which usually require the relocation of existing heat exchangers or addition of ones and the installation of stream splitters (Wang et al., 2021). Such integration is usually applied in heat exchanger networks and in the preheating train of processes.", "mime": "application/pdf"}, {"id": "cet-12762", "words": "2986", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12762", "date": null, "keywords": "air; flow; humidification; humidity; process; results; temperature; water", "summary": "In addition, Zhang et al. (2020) studied 1231 the process of air humidification for the humid air turbine cycle using a two-phase measurement system. First, the effects of water temperature and flow rate were investigated by experimental tests.", "mime": "application/pdf"}, {"id": "cet-12763", "words": "3126", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-12763", "date": null, "keywords": "data; figure; kazakhstan; land; pavlodar; region; sensing; soil; use; vegetation", "summary": "Introduction One of the main directions of using remote sensing (RS) data in agriculture is the analysis of the effectiveness of agricultural land use. State statistics and agricultural land records in this case become biased, making it difficult to assess the efficiency and control of agricultural land use.", "mime": "application/pdf"}, {"id": "cet-12764", "words": "2825", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12764", "date": null, "keywords": "cleaning; exchanger; heat; hen; interventions; method; number", "summary": "The aim of heat exchanger cleaning from fouling is to minimise the operating cost of HEN. The optimal scheduling of HEN cleaning can be understood as maximizing function F while satisfying the constraint (Eq(3), Eq(4)) imposed on time intervals between cleaning operations.", "mime": "application/pdf"}, {"id": "cet-12765", "words": "3539", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12765", "date": null, "keywords": "bodies; fibres; leaching; model; pet; plastic; samples; waste; water", "summary": "PET fibre plastic materials in different water bodies. A large proportion of PET plastics end up in landfills at the end of their life cycle or are released into the environment in an uncontrolled manner, leaving a large environmental footprint (Kleme\u0161 et al., 2020).", "mime": "application/pdf"}, {"id": "cet-12766", "words": "3160", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12766", "date": null, "keywords": "compatibility; plastic; polymers; recycling; waste", "summary": "ISBN 978-88-95608-93-8; ISSN 2283-9216 Plastic Waste Circularity with Data-Driven Approach Considering Polymer Heterogeneity Hon Huin China,*, Petar Sabev Varbanova, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161a, Raymond R. Tanb, Kathleen B. Avisob aSustainable Process Integration Laboratory \u2013 SPIL, NETME Centre, Faculty of Mechanical Engineering, Brno University of Technology - VUT Brno, Technick\u00e1 2896/2, 616 69 Brno, Czech Republic bDepartment of Chemical Engineering, Gokongwei College of Engineering, De La Salle University, 2401 Taft Avenue, 0922 Manila, Philippines chin@fme.vutbr.cz Plastic debris has been a consistent issue in the global environment, and plastic waste recycling is the most promising option to avoid further accumulation. This work aims to extend the previously developed data-driven approach to quantifying the recyclability clusters of plastic waste to consider polymer heterogeneity in the evaluation.", "mime": "application/pdf"}, {"id": "cet-12767", "words": "3327", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-12767", "date": null, "keywords": "cycle; design; emissions; energy; heat; optimization; scope; systems; total", "summary": "The optimization results provide guidance for sustainable design and operations of energy systems, identify environmental hotspots and associated mitigation strategies, and inform the resulting social benefits. 1. Introduction Extensive research on deep decarbonization of energy systems is conducted at the city-level (Wiryadinata et al., 2019), state-level (Zhao and You, 2020), and country-level (Vaillancourt et al., 2017).", "mime": "application/pdf"}, {"id": "cet-12768", "words": "3512", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-12768", "date": null, "keywords": "capacity; energy; heat; material; phase; ratio; storage; tank; temperature; tes", "summary": "Thermal energy storage for waste heat recovery in the steelworks: The case study of the REslag project. Thermal energy storage\u2013overview and specific insight into nitrate salts for sensible and latent heat storage.", "mime": "application/pdf"}, {"id": "cet-12769", "words": "4363", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-12769", "date": null, "keywords": "carbon; challenges; cost; economy; energy; fossil; fuels; green; hydrogen; hydrogen production; production; technology; waste", "summary": "Hydrogen energy, economy and storage: Review and recommendation. Waste-to-energy nexus for circular economy and environmental protection: Recent trends in hydrogen energy.", "mime": "application/pdf"}, {"id": "cet-12770", "words": "3300", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-12770", "date": null, "keywords": "delivery; drug; effect; model", "summary": "Taking this case as an example, the simulation results of its drug concentration and drug effect are shown in the Figure 2, and it can provide effective drug effect within a certain period of time in each cycle. In this model, tolerance is attributed to the accumulation of drug metabolites as drug antagonists, which leads to the decrease of drug effects over time.", "mime": "application/pdf"}, {"id": "cet-12771", "words": "4090", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12771", "date": null, "keywords": "attitudes; chinese; energy; participants; variables; wpm", "summary": "Participants' sustainable attitudes were comprehended via quantifying their psychosocial variables including awareness of climate change and energy sources, and their behavioural intentions, i.e. willingness to pay a financial premium for renewables and nuclear power. Keay M., 2016, UK energy policy \u2013 Stuck in ideological limbo, Energy Policy, 94, 247-252.", "mime": "application/pdf"}, {"id": "cet-12772", "words": "4391", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12772", "date": null, "keywords": "electricity; energy; heat; hydrogen; lohc; power; storage; system", "summary": "This work introduces the Total Site Hydrogen Storage Cascade (TS-H2SC) to integrate hydrogen energy storage with Urban-Industrial Symbiosis based on the Total Site Heat and Power Integration methodologies, as shown in Figure 1. Perform hydrogen energy storage targeting for determining the storage capacity using Total Site Hydrogen Storage Cascade (TS-H2SC), as shown in Table 1.", "mime": "application/pdf"}, {"id": "cet-12773", "words": "2575", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12773", "date": null, "keywords": "carbon; hydrothermal; plastics; pom; process; sphere; waste; water", "summary": "Figure 4: Photos of POM sphere treated in different methods: (a) untreated POM sphere; (b) POM sphere saturated in 1 % nigrosine for 48 h; (c) profile of POM sphere in (b); (d) hydrothermal processed POM; (e) 1 % nigrosine involved hydrothermal processed POM; (f) profile of POM sphere in (e) 4. Table 4: TOC results of the aqueous phase of hydrothermal processed POM under different temperature conditions (original water dose: 0.2 mL) (mg) 200 \u2103 210 \u2103 220 \u2103 230 \u2103 240 \u2103 250 \u2103 1 4.8270 4.6858 4.3692 4.4721 4.4370 4.4486 2 4.9517 4.7759 4.5738 4.3602 4.5021 4.1879 3 4.4258 4.2728 4.2354 4.4626 4.1583 4.4786 4 4.3945 4.5390 4.3580 4.5136 4.4434 4.4634 average 4.6498 4.5684 4.3841 4.4521 4.3852 4.3946 Figure 3: Visualization of entire process of POM sphere in hydrothermal condition (220 \u2103, 2.32 MPa)", "mime": "application/pdf"}, {"id": "cet-12774", "words": "3248", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12774", "date": null, "keywords": "gasification; hydrogen; layer; model; prediction; value; yield", "summary": "The CPU time of double hidden layer model is about 13 min while that of single hidden layer model is about 6.2 min. 3.2 Comparison of training value and predicted value of double hidden layer Figure 3: Correlation diagram between the predicted value and experiment data (a) Carbon gasification rate; (b) Hydrogen gasification rate; (c) Hydrogen yield; (d) Total gas yield 3.4 Results of single hidden layer model The prediction results of hydrogen and carbon dioxide are not ideal and the loss function values derived from the program are shown in Table 2: Table 2: Loss function values of different gasification products Carbon gasification rate Hydrogen gasification rate Hydrogen gas yield Total gas yield MSE 7.1355", "mime": "application/pdf"}, {"id": "cet-12775", "words": "3605", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12775", "date": null, "keywords": "biomass; carbonization; energy; hhv; hydrothermal; process; sawdust; temperature", "summary": "1312 Sawdust reaches a 48% increase in calorific power at 280 \u00b0C and 100 min, something only comparable to that achieved by other biomasses in more extended periods and with higher temperatures, as explained in the previous section. Raw biomass and water were loaded, and before closing the reactor, gaseous nitrogen was injected to ensure an inert atmosphere.", "mime": "application/pdf"}, {"id": "cet-12776", "words": "3119", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12776", "date": null, "keywords": "air; biofilter; cfd; doi; engineering; figure; pressure; system; velocity", "summary": "Results and discussions 3.1 Determination of biofilter system efficiency Three samples of the biofilter inlet and outlet gas were taken under stable operating conditions: at the stove outlet and the biofilter inlet and outlet. Finally, a CFD simulation of the complete biofilter was carried out for inlet air flows between 0.21 and 0.42 m3/h, and the pressure fields and velocity distribution inside it were obtained.", "mime": "application/pdf"}, {"id": "cet-12777", "words": "4170", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12777", "date": null, "keywords": "analysis; et al; hdpe; plastic; samples; virgin; waste", "summary": "Calorific values of both samples were comparable, while the degree of crystallinity was 79.8 % for virgin HDPE and around 19 % lower for recycled HDPE samples. Materials and methods This section describes the characterisation methods and analytical procedures and further the procedure for thermal analysis of virgin and recycled HDPE samples.", "mime": "application/pdf"}, {"id": "cet-12778", "words": "3968", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12778", "date": null, "keywords": "compressive; concrete; fiber; properties; scc; steel; strength; tire; twsf; waste", "summary": "However, there is still limited literature describing the behavior of SCC with tire waste steel fiber (TWSF). Additionally, the mix proportions used in the study are tabulated in Table 2, where SCC denotes for control mix, and TWSF-0.7, TWSF-1, TWSF-2, and TWSF-3 stand for mixtures with a varying fraction of tire waste steel fiber.", "mime": "application/pdf"}, {"id": "cet-12779", "words": "3327", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12779", "date": null, "keywords": "condensate; condensation; distribution; film; heat; transfer; tube", "summary": "Nusselt (Yang and Tao, 2006) was the first to analyse film condensation theoretically and summarize the calculation formula of condensation heat transfer coefficient (HTC). Chato (1960) put forward the calculation formula of condensation heat transfer coefficient suitable for Re<35,000.", "mime": "application/pdf"}, {"id": "cet-12780", "words": "3654", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12780", "date": null, "keywords": "ammonia; carbon; distribution; emissions; energy; hydrogen; network; production; synthesis; utilization", "summary": "The production and utilization of green ammonia is specifically analyzed here, making it the first of its kind to analyze optimization-based synthesis of green ammonia networks. Produced primarily by the Haber-Bosch process, ammonia production has become more efficient over time through many technological advancements.", "mime": "application/pdf"}, {"id": "cet-12781", "words": "3619", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-12781", "date": null, "keywords": "geopolymer; level; management; mapping; materials; research; study; waste", "summary": "Radioactive waste is a type of hazardous waste that contains radioactive material. Common sources of radioactive wastes are nuclear fuel cycle, nuclear weapons reprocessing, medical wastes, industrial wastes, and naturally occurring radioactive materials.", "mime": "application/pdf"}, {"id": "cet-12782", "words": "3723", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12782", "date": null, "keywords": "approach; heat; hiwn; model; step; stream; temperature; water", "summary": "One is the set of ymax variables, which are used to identify TIs with their temperatures lower than the highest stream temperature among hot stream inlet temperatures and cold stream outlet temperatures. Also, a simplified heat integration block was proposed for enabling non-isothermal mixing and indirect heat transfers based on a convex hull formulation (Ahmetovi\u0107 and Kravanja, 2013) for identifying the roles of water streams in HEN.", "mime": "application/pdf"}, {"id": "cet-12783", "words": "4177", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12783", "date": null, "keywords": "hub; mass; plant; streams; superstructure; synthesis; utility", "summary": "A 21 % reduction in cost was obtained when the same external mass separating agent is used to absorb multiple components from rich streams at the utility hub when compared to the case where different external mass separating agents are used. In the SWS model for MENS presented by Szitkai, et al. (2006), along the superstructure, rich streams run from left to right while lean streams (which are the MSAs) run in the opposite direction.", "mime": "application/pdf"}, {"id": "cet-12784", "words": "4724", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-12784", "date": null, "keywords": "biodiversity; change; climate; development; dpsir; environmental; epi; framework; malaysia; management; plan; policy; quality; waste", "summary": "For example, in the 12th Malaysia Plan, instead of at least 10 % of coastal and marine areas as well as 17 % of terrestrial and inland water areas to be gazetted as protected areas, Malaysia only managed to achieve 5.3 % and 10 % (EPU, 2021). Economic Planning Unit, 2015, Eleventh Malaysia Plan 2016 \u2013 2020: Anchoring Growth on People, Prime Minister\u2019s Department, Malaysia, <epu.gov.my/RMKe-11%20Book.pdf> accessed 03.03.2022.", "mime": "application/pdf"}, {"id": "cet-12785", "words": "4025", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-12785", "date": null, "keywords": "capture; co2; cost; flow; gas; membrane; optimisation; pattern; process", "summary": "Merkel et al. (2010) studied different membrane module flow patterns for CO2 separation from flue gas from coal-fired power plants. Membrane gas separation processes from wet postcombustion flue gases for carbon capture and use: A critical reassessment.", "mime": "application/pdf"}, {"id": "cet-12786", "words": "3650", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-12786", "date": null, "keywords": "adsorption; carbon; ions; lead; tire; waste; wtac; wtpc", "summary": "The results obtained from the study showed that waste tire activated carbon could effectively remove Pb2+ from aqueous solution far better than waste tire pyrolytic char. The thermodynamic parameters also showed decreased randomness at the solid/liquid interface during the adsorption of lead ions onto waste tire activated carbon.", "mime": "application/pdf"}, {"id": "cet-12787", "words": "3778", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12787", "date": null, "keywords": "al6061; corrosion; e10; eis; ethanol; gasoline; immersion; layer; rate; samples; ss304", "summary": "Corrosion rates were estimated from polarization resistance measurements via electrochemical impedance spectroscopy. The Al6061 samples experienced a large increase in corrosion rate after four weeks of immersion testing.", "mime": "application/pdf"}, {"id": "cet-12788", "words": "3208", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12788", "date": null, "keywords": "analysis; compost; density; plant; radish; stomata; table; treatment; waste", "summary": "B\u00e1rbaro, L. A., Karlanian, M. A. and Mata, D. A., 2014, Importancia del pH y la Conductividad El\u00e9ctrica en los sustratos para plantas, Instituto Nacional de Tecnolog\u00eda Agropecuaria <inta.gob.ar/sites/default/files/script- tmp-inta_-_importancia_del_ph_y_la_conductividad_elctrica.pdf> accessed 07.04.2021. D\u2019Eletto, J. et al., 2018, Efecto de la incorporaci\u00f3n de compost de cama profunda de cerdos en el cultivo de lechuga, XXVI Jornadas de J\u00f3venes Investigadores AUGM, 148, pp. Balzarini, M. et al., 2015, Estad\u00edstica y Biometr\u00eda.", "mime": "application/pdf"}, {"id": "cet-12789", "words": "3296", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12789", "date": null, "keywords": "antioxidant; coolant; cucumber; juice; model; pfc; process; temperature", "summary": "3. Results and discussion 3.1 Relationship between coolant temperature and antioxidant activity of cucumber juice In order to discover the relationship between coolant temperature and antioxidant activity, the other parameters such as operating time, stirrer speed, and initial concentration of cucumber juice were kept constant.", "mime": "application/pdf"}, {"id": "cet-12790", "words": "3083", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12790", "date": null, "keywords": "broth; indole; indoline; lead; pb(ii; ppm; removal", "summary": "The current study used the same separations module and a C18 column as in the study by Yong et al., (2017). The method by Yong et al. (2017) was used for measuring various indole compounds in sugar cane juice.", "mime": "application/pdf"}, {"id": "cet-12791", "words": "2887", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12791", "date": null, "keywords": "barrier; control; cr(vi; days; effluent; reactor; system", "summary": "Therefore, the bacteria in the sludge was thus expected to be acclimatized to high Cr(VI) exposure conditions. Cr(VI) is highly mobile, soluble and bioavailable in the environment, it is the most toxic among chromium species, and is a known carcinogen.", "mime": "application/pdf"}, {"id": "cet-12792", "words": "3348", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12792", "date": null, "keywords": "current; electrochemical; et al; naphthalene; oxidation; water", "summary": "PAHs including naphthalene, biphenyl, fluorene, anthracene, phenanthrene among others are classified as hazardous due to their carcinogenic, teratogenic, genotoxic, and persistent nature (Zhang et al., 2019). Exposure of PAHs to humans may cause various cancers and several other diseases such as oral cancer, stomach cancer, asthma, and heart diseases (Zhang et al., 2019).", "mime": "application/pdf"}, {"id": "cet-12793", "words": "3450", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-12793", "date": null, "keywords": "atcc; bacillus; cells; chirwa; coli; concentration; cr(vi; culture; g(\u2212ve; reduction; sludge; species", "summary": "Heat killed culture cells and azide exposed cultures were used to determine the extent of abiotic Cr(VI) reduction in the batch experiments (Chirwa, 2005). The plant received high periodic loadings of Cr(VI) contaminated effluent from an abandoned chrome processing foundry within the chrome mining town of Brits.", "mime": "application/pdf"}, {"id": "cet-12794", "words": "3011", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12794", "date": null, "keywords": "engineering; figure; graphene; mls1; npcl; pvp+g; tissue", "summary": "Afterwards, pristine graphene nanoplatelets solution was added drop by drop at 1% (w/v). Chem G., Thomas M. S., Pillai P. K. S., Farrowc S. C., Pothan L. A., Thomas, S. (2021).", "mime": "application/pdf"}, {"id": "cet-12795", "words": "3383", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12795", "date": null, "keywords": "concentration; grass; metals; palladium; platinum; ppm; roots; vetiver; vetiver grass", "summary": "2.4 Bioaccumulation factor (BAF) and Translocation factor (TF) BAF is the quotient of Pd concentration in the roots (mg g -1) and initial pot concentration (ppm), TF is the quotient of Pd content in the leaves and Pd content in the roots (mg g -1). Vetiver grass had Pd concentrations above 1000 ng g-1 in both roots and shoots showing that vetiver grass can hyperaccumulate palladium.", "mime": "application/pdf"}, {"id": "cet-12796", "words": "3219", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12796", "date": null, "keywords": "acid; et al; fermentation; glucose; production; succinogenes", "summary": "Brink H. G., Nicol W., 2014, Succinic acid production with Actinobacillus succinogenes: rate and yield analysis of chemostat and biofilm cultures, Microbial Cell Factories, 13, 111. Dessie W., Xin F., Zhang W., Jiang Y., Wu H., Ma J., Jiang M., 2018, Opportunities, challenges, and future perspectives of succinic acid production by Actinobacillus succinogenes, Appl Microbiol Biotechnol, 102, 9893-9910.", "mime": "application/pdf"}, {"id": "cet-12797", "words": "3746", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12797", "date": null, "keywords": "16s; consortium; cyanide; et al; gold; group; identification; l-1; rrna; strains", "summary": "Frank, J. A., Reich, C. I., Sharma, S., Weisbaum, J. S., Wilson, B. A., and Olsen, G. J., 2008, Critical Evaluation of Two Primers Commonly Used for Amplification of Bacterial 16S rRNA Genes. Tiong, B., Bahari, Z. M., Lee, N. S. I. S., Jaafar, J., Ibrahim, Z., and Shahir, S., 2015, Cyanide Degradation by Pseudomonas pseudoalcaligenes Strain W2 Isolated from Mining Effluent, Sains Malaysiana, 44(2), 233\u2013 238.", "mime": "application/pdf"}, {"id": "cet-12798", "words": "2738", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-12798", "date": null, "keywords": "chemical; cus; degradation; irradiation; light; rhodamine; zns", "summary": "Semiconductor metal sulphides composites have unique physicochemical properties making a widespread potential in applications such as solar cells, drug delivery, sensors, catalysis, and environmental pollution both 1447 air and water (Wang et al., 2014). Transition-metal chalcogenides such as ZnS and CuS have been extensively studied due to their excellent photochemical and luminescent properties (Wang et al., 2016).", "mime": "application/pdf"}, {"id": "cet-12799", "words": "3091", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-12799", "date": null, "keywords": "adsorbent; adsorption; chromium; cr(vi; kaolinite; nanocomposites; surface", "summary": "Next, the nanocomposites were characterized and used for adsorption study. Adsorption study of Cr(VI)", "mime": "application/pdf"}, {"id": "cet-12800", "words": "3699", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-12800", "date": null, "keywords": "concentration; dispersion; mean; method; model; particle; peak; vpa", "summary": "Via Benigno Crespi 57, Milan 20159, Italy b Independent Scientific Consultant, Italy g.tinarelli@aria-net.it In the frame of the modelling simulation of odour nuisances, the estimation of concentration peaks, representing values averaged over a relatively short time of the order of the interval between subsequent breathes, is of fundamental importance. Figure 1a represents the average concentration field close to the ground given by the standard dispersion model, while Figure 1b and Figure 1c reproduce peak concentrations using the VTE method and the VPA method respectively, as described in Chapter 2.", "mime": "application/pdf"}, {"id": "cet-12801", "words": "3228", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12801", "date": null, "keywords": "concentrations; emission; enose; h2s; odour; outlet; results; system; vigi; vsc", "summary": "The emission samples were taken from 10 sources (including the 6 sources connected to Vigi eNose\u00ae system for on-line monitoring) in 10 L Nalophan\u00ae bags using the necessary equipment as appropriate (lung device, Lindvall hood, probe, \u2026). Figure 2a (Above): Comparison of average September-October 2021 Vigi eNose\u00ae results.", "mime": "application/pdf"}, {"id": "cet-12802", "words": "3221", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12802", "date": null, "keywords": "assessment; chemical; citizens; complaints; impact; odour; plant; waste", "summary": "This approach allows predicting odour impact starting from the characterization of odour emissions at the source. Materials and Methods The proposed methodology includes the study of odour impact through the Lagrangian dispersion modelling system Calpuff.", "mime": "application/pdf"}, {"id": "cet-12803", "words": "3352", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12803", "date": null, "keywords": "air; carbon; coal; efficiency; removal; set", "summary": "Active carbon filters operate best under relative humidity\u2019s below 65 % (Gong and Keener, 1993). The carbon set-ups needed to have 7.29 l of active carbon, which was mounted in a PVC column with an inner diameter of 185 mm and a height of 270 mm.", "mime": "application/pdf"}, {"id": "cet-12804", "words": "3690", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12804", "date": null, "keywords": "citizens; class; data; ioms; odour; plant; reports; treatment", "summary": "At first, we carried out an analysis of the results provided by the IOMS, so that we could identify the most frequent odour classes and relative odour concentrations: it was decided to investigate different ranges of odour concentration to verify which sources were most influential in the most intense episodes of nuisance. A total of 51 samples were collected, with odour concentrations ranging from 20 to 2435 uoE/m3.", "mime": "application/pdf"}, {"id": "cet-12805", "words": "3219", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12805", "date": null, "keywords": "concentration; gases; h2s; mean; peak; ppb; values", "summary": "As shown in Figure 2, the spectral correction leads to peak concentration values significantly higher than those obtained by using the sample variance as measured by the instrument (Figure 2 concentration-axis scale is logarithmic). 2.1 Definition of peak concentration and its determination The instantaneous concentration c(t) of a gas in the PBL can be considered as a stationary stochastic process whose statistical properties are completely defined by a probability density function (PDF) that has to be determined experimentally (see, e.g., Cassiani et al., 2020 for a review), and is well described by a Gamma distribution (Nironi et al. 2015).", "mime": "application/pdf"}, {"id": "cet-12806", "words": "3108", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12806", "date": null, "keywords": "data; ioms; odour; sample; sensor; source; systems; training; validation", "summary": "The exclusive usage of human sensory methods effects that for all legally relevant situations, sensor systems may not be applied as a substitute, regardless of their actual performance. Source attribution was possible from 50 ouE/m\u00b3. 4.2 Odour training using extended field inspection Following lab qualification from the section above, a small network of sensor systems was deployed on the wastewater plant.", "mime": "application/pdf"}, {"id": "cet-12807", "words": "3521", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12807", "date": null, "keywords": "annoyance; cell; figure; impact; nuisance; odour; potential; risk; territory; vulnerability", "summary": "Odour nuisance: Decision support tools to anticipate and represent levels of odour nuisance on a territory. These values were collected through a questionnaire open to all (365 responses have been collected), providing information on the capacity to bear a nasty odour in various situations which allow us to define a sensibility value and rank all the activities according to their sensibility to odour annoyance.", "mime": "application/pdf"}, {"id": "cet-12808", "words": "2718", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12808", "date": null, "keywords": "air; air quality; data; device; figure; monitoring; network; quality; sensors", "summary": "A recent report by the World Meteorological Organization (WMO) comprehensively 49 mailto:jesuslozano@unex.es examines a range of low-cost gas sensors for air quality monitoring (Lung et al., 2018). Conclusions and Future Works In this paper, a low-cost, low-consumption and very small size Instrumental Odour Monitoring System has been used for air quality monitoring.", "mime": "application/pdf"}, {"id": "cet-12809", "words": "3255", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12809", "date": null, "keywords": "assessment; odour; sample; survey", "summary": "Subsequently, the same data was randomly divided into 3 individual data sets (sample surveys 1 to 3), each including 104 single measurements. Only on the assessment squares B and H, the results of sample survey 2, are higher than the uncertainty range of the reference survey.", "mime": "application/pdf"}, {"id": "cet-12810", "words": "3909", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12810", "date": null, "keywords": "air; compounds; fid; n e; z e", "summary": "Acknowledgments This work was carried out as part of a thesis with a CIFRE agreement from the National Association for Technical Research (ANRT) 67 37 8 21 33 63 92 79 0 10 20 30 40 50 60 70 80 90 100 A lk a n e s A ro m a ti c h y d ro c a rb o n s O V O C s H a lo g e n a te d c o m p o u n d s D is tr ib u ti o n p e rc e n ta g e ( % ) FID MS 0 10 20 30 40 50 60 70 80 90 100 C y c lo h e x a n e 2 -M e th y l- h e x a n e 3 -M e th y l- h e x a n e 2 2 4 -T ri m e th y l- p e n ta n e N -h e p ta n e M e th y l- c y c lo h e x a n e 2 3 4 -T ri m e th y l- p e n ta n e 2 -M e th y l- h e p ta n e 3 -M e th y l- h e p ta n e N -o c ta n e N -n o n a n e N -d e c a n e B e n z e n e T o lu e n e E th y l- b e n z e n e m & p -x y le n e s S ty re n e o -x y le n e i- p ro p y lb e n z e n e n -p ro p y lb e n z e n e m -e th y lt o lu e n e p -e th y lt o lu e n e 1 3 5 -T ri m e th y lb e n z e n e o -e th y lt o lu e n e 1 2 4 -T ri m e th y lb e n z e n e 1 2 3 -T ri m e th y lb e n z e n e m -d ie th y lb e n z e n e p -d ie th y lb e n z e n e A c ro le in A c e to n e Is o p ro p y l a lc o h o l M e th y l te rt -b u ty l e th e r V in y l a c e ta te M e th y l e th y l k e to n e E th y l a c e ta te T H F 1 ,4 -D io x a n e M e th y l m e th a c ry la te M e th y l is o b u ty l k e to n e M e th y l b u ty l k e to n e C h lo ro e th a n e D ic h lo ro m e th a n e 1 -1 -D ic h lo ro e th a n e C -1 -2 -D ic h lo ro e th e n e C h lo ro fo rm e 1 -2 -D ic h lo ro e th a n e 1 1 1 -T ri c h lo ro e th a n e C C l4 1 -2 -d ic h lo ro p ro p a n e B ro m o -d ic h lo ro m e th a n e T ri c h lo ro e th e n e D ib ro m o -c h lo ro m e th a n e 1 -2 -D ib ro m o e th a n e T e tr a c h lo ro e th e n e C h lo ro b e n z e n e B e n z y lc h lo ri d e 1 -3 -d ic h lo ro b e n z e n e 1 -4 -d ic h lo ro b e n z e n e 1 -2 -d ic h lo ro b e n z e n e Alkanes Aromatic compounds OVOCs Halogenated compounds A c c u ra c y a t 4 p p b ( % R S D ) FID MS Validated data 65 References Abraham M. H., Gola J. M.R., Cometto-Mu\u00f1iz J. E., (2016), An assessment of air quality reflecting the chemosensory irritation impact of mixtures of volatile organic compounds, Environment International 86, 84 \u2013 91. Fortunately, we can avoid these coelutions with MS detection by selecting the specific ion for each compound.", "mime": "application/pdf"}, {"id": "cet-12811", "words": "3119", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12811", "date": null, "keywords": "air; airmohcho; analysis; concentration; figure; formaldehyde; gas; m-3; permeation", "summary": "Salthammer T., 2019, Formaldehyde sources, formaldehyde concentrations and air exchange rates in European housings, Building and Environment, 150, 219\u2013232. 2.1 Overall setup for the detection of gaseous formaldehyde at various concentrations The setup used for the simultaneous quantification of gaseous formaldehyde by the two analysers is represented in Figure 1.", "mime": "application/pdf"}, {"id": "cet-12812", "words": "2525", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12812", "date": null, "keywords": "ann; cascade; classification; figure; gas; no2; prediction; sensors", "summary": "Yaqoob U., Younis M. I., 2021, Chemical gas sensors: Recent developments, challenges, and the potential of machine learning\u2014a review. As a result, LDA is an excellent method for discriminating NO2 and the cascade of ANN ensemble is a novel method for gas prediction through a portable electronic nose.", "mime": "application/pdf"}, {"id": "cet-12813", "words": "2935", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12813", "date": null, "keywords": "class; data; ioms; monitoring; odour; population; treatment", "summary": "Furthermore, with a view to increasing the confidence of the population in the objective characterization of odours and related impacts, the implementation of aspects of communication and active involvement in decision-making and control models are suggested (Zarra et al., 2010; Levontin et al., 2022).The retrieval of odour characterization data through the active involvement of the population directly impacted from the odour nuisance is part of a virtuous approach know as Citizen Science, in which participation becomes an opportunity for institutions, businesses and citizens to identify the best strategy for managing the problem, sharing the decision-making processes in solving the critical issues reported (Alharbi and Soh, 2019; The main feature is related to the validation of odour annoyance data collected from citizens with the data collected from Instrumental Odour Monitoring Systems (IOMSs), Air Quality and meteorological stations.", "mime": "application/pdf"}, {"id": "cet-12814", "words": "3379", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12814", "date": null, "keywords": "austal; complaints; dispersion; figure; gral; model; odour; symos", "summary": "The latest developments in Lagrangian models, such as AUSTAL and GRAL, allow to calculate odour hour frequencies (analogous to exceedance probabilities), defined as one-hour time intervals in which the modelled peak concentration (assumed to be represented by the 90th percentile) exceeds the odour concentration threshold, usually set at 1 OUE\u2219m\u22123. Sommer-Quabach E., Piringer P., Petz, E. Schauberger G., 2014, Comparability of separation distances between odour sources and residential areas determined by various national odour impact criteria, Atmospheric Environment, 95, 20\u201328.", "mime": "application/pdf"}, {"id": "cet-12815", "words": "3444", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12815", "date": null, "keywords": "analysis; classification; data; ffnn; ioms; monitoring; odour; pls", "summary": "On the other hand, odour dispersion models are able to predict odour concentration values at ground level in the simulation space-time domain (Botta et al., 2020). The paper presents and discusses the development and application of different odour monitoring models (OMMs) for the classification and quantification of odour emissions with Instrumental Odour Monitoring Systems (IOMSs).", "mime": "application/pdf"}, {"id": "cet-12816", "words": "3177", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-12816", "date": null, "keywords": "co2; gas; h-1; lipids; m-3; mean; production; xylene", "summary": "https://doi.org/10.1016/j.fuel.2020.118804 Senatore V., Zarra T., Pahunang R. R., Oliva G., Belgiorno V., Ballesteros F. C., Naddeo V., 2021\u00b0, Sustainable odour and greenhouse gas emissions control in wastewater treatment plant by advanced biotechnology- based system. 2.3.2 Assessment of PBR performance on CO2 fixation and simultaneous lipids production The PBR was fed with the outlet gas from the MBBR.", "mime": "application/pdf"}, {"id": "cet-12817", "words": "2647", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12817", "date": null, "keywords": "compounds; concentration; cylinders; gas; method; mixtures; ppm", "summary": "[Pa] n-Butanol 71-36-3 625 Cyclohexane 110-82-7 10 384 Cyclopentane 287-92-3 36 660 Decane 124-18-5 127 Dodecane 112-40-3 12 Dimethyl disulphide 624-92-0 3 000 Dimethyl sulphide 75-18-3 65 000 Heptane 142-82-5 4 703 Hexane 110-54-3 16 000 Isooctane 540-84-1 5 300 Methyl ethyl ketone 78-93-3 9 867 2-methylpentane 107-83-5 22 700 Pentane 109-66-0 57 000 Toluene 108-88-3 2 900 3.2 Comparison with known concentration gas cylinders Dynamic injection vs known concentration gas cylinder at medium concentration - toluene 0 2 4 6 8 10 12 14 16 18 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 COMPRESSED GAS CYLINDER DYNAMIC", "mime": "application/pdf"}, {"id": "cet-12818", "words": "3128", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12818", "date": null, "keywords": "analysis; gas; liquid; min; odour; oec; time", "summary": "Back to the OEC analysis, its application is mainly suitable for domestic wastewater, where the reduction of odour concentration up to values of the order of 102\u00f7103 ouE/m3 is quite easy in the operating conditions of the analysis. \u2212 \ud835\udc36100) \ud835\udc49\ud835\udc59\ud835\udc56\ud835\udc5e\ud835\udc62\ud835\udc56\ud835\udc51 \u2219 \ud835\udc51\ud835\udc49\ud835\udc412 (\ud835\udc61) (1) where Cod(t) is the measured odour concentration at the instant t multiplied for 8 (i.e. the dilution factor), C100 is the reference value of odour concentration lower limit (i.e. 100 ouE/m3), Vliquid is the volume of analysed liquid and dVN2(t) is the infinitesimal volume of fluxed nitrogen at the instant t. Errore.", "mime": "application/pdf"}, {"id": "cet-12819", "words": "3547", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12819", "date": null, "keywords": "biomass; concentration; forest; heap; odour; smoking; storage; time; wood", "summary": "Wood chip heaps are very often not only heterogeneous from each other, but even a single heap is heterogeneous on its surface. This experimental work focuses on the characterization of odorous emission from wood chips storage, since similar studies are not available in literature.", "mime": "application/pdf"}, {"id": "cet-12820", "words": "4671", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12820", "date": null, "keywords": "area; data; impact; observations; odour; odour observations; sludge; treatment; waste; wastewater", "summary": "A total of 600 odour observations were collected by 86 unique users, which are under analysis in this paper with the objective to understand odour trends and to identify potential user input errors, such as odour observations mapped as pleasant but with negative comments on the annoyance perception. Geolocated odour observations provide useful information about the real distribution of the odour impact in the studied area.", "mime": "application/pdf"}, {"id": "cet-12821", "words": "3344", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12821", "date": null, "keywords": "analysis; compounds; materials; sorbent; sorbent tubes; sulphur; sulphur compounds; tubes", "summary": "Qualitative identification of target VOSCs was based on the match of the retention times and qualifier ions, shown in Table 2. 2.4 Performance parameters The discussion of the performances of different sorbent tubes was conducted by comparing two principal parameters: the Average Response Factor (RFaverage) and its Relative Standard Deviation (% RSD). To better investigate the performance of different sorbent materials applied to the analysis of VOSCs, a comparison of different sorbent tubes applied to the analysis of sulphur compounds was discussed in this study.", "mime": "application/pdf"}, {"id": "cet-12822", "words": "3989", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12822", "date": null, "keywords": "concentration; data; dispersion; emission; model; odour; source; time", "summary": "Generally, the odour concentration is evaluated through emission olfactometry monitoring, and subsequently, based on the dispersion modelling software, impact maps are created at specific percentiles (odour concentrations that are reached for a certain number of hours a year). Furthermore, all these aspects affect the instantaneous perception of odour and in an ex-post simulation based on percentiles (odour concentrations that are reached for a certain number of hours a year), it is not possible to know what occurs above the specified percentile.", "mime": "application/pdf"}, {"id": "cet-12823", "words": "2984", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12823", "date": null, "keywords": "concentration; fenceline; ioms; monitoring; odour; plant; samples", "summary": "The present work describes a research project, currently ongoing, concerning the realisation of an innovative IOMS network for the real-time measurement of odour concentration at the fenceline of a plant for the treatment of organic waste. In this context, this paper describes a research project concerning the development of an innovative IOMS network for real-time monitoring of odour concentration at the fenceline of a waste treatment plant (WTP) producing biomethane and quality compost.", "mime": "application/pdf"}, {"id": "cet-12824", "words": "2907", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12824", "date": null, "keywords": "czech; health; nanoparticles; smell; smoke; wood", "summary": "Due to the potential health effects of wood smoke nanoparticles, exposure to this source of air pollution should be minimal. The procedure of our measurement of the concentration of nanoparticles (10-700 nm) in wood smoke and their mean diameters can be called terrain.", "mime": "application/pdf"}, {"id": "cet-12825", "words": "3495", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-12825", "date": null, "keywords": "analysis; compounds; fid; pfpd; quantification; samples", "summary": "By using this system, it is, therefore, possible to achieve the specific detection and quantification of organic compounds by FID analysis, sulphur compounds by PFPD and the identification of the compounds by MS analysis, via comparison with mass spectra. This combination was adopted to obtain the specific detection and quantification of organic compounds by FID analysis, sulphur compounds by PFPD and the identification of the compounds, by MS analysis, by comparing the generated spectra with library ones.", "mime": "application/pdf"}, {"id": "cet-12826", "words": "3353", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-12826", "date": null, "keywords": "concentration; conditions; emissions; furnaces; impact; odour; plant; smelting", "summary": "Sironi S., Capelli L., C\u00e9ntola P., Del Rosso, R., Pierucci S., 2010, Odour impact assessment by means of dynamic olfactometry, dispersion modelling and social participation, Atmospheric Environment, 44(3), 354- 360. a) b) 162 39lotesoriere.pdf A Method to Evaluate Odour Impacts in the Case of Highly Variable Emission Scenarios: a Case Study in a Foundry This led to an increase of odour emissions associated to the different operating conditions of foundries.", "mime": "application/pdf"}, {"id": "cet-12827", "words": "3957", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12827", "date": null, "keywords": "factors; impact; intensity; levels; measurement; odour; perception; scale", "summary": "Global odour perception is, in fact, subjective due to the interpretation of perceived smells in a context. If this fifth factor must represent all sensitivities not considered by other factors, it must integrate physiological and psychological health, age, social level\u2026 2.6 Not studied interactions Because odour perception is complex, FIDOL/FIDOR/FIDOS describe a situation.", "mime": "application/pdf"}, {"id": "cet-12828", "words": "3791", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12828", "date": null, "keywords": "arrival; arrival tank; concentration; data; odour; plant; tank", "summary": "Due to the frequent reports of odour nuisance from the citizens living in the proximity of the plant, in agreement with the regional guidelines on odour emission management, several olfactometric campaigns were carried out at the WWTP emission sources with the purpose of determining odour concentrations and odour emission rates. Based on visual investigation of the PCA score plot, the PC1 direction expresses a clear correlation with the odour concentration of samples: decreasing PC1 values correspond to increasing odour concentration.", "mime": "application/pdf"}, {"id": "cet-12829", "words": "3615", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12829", "date": null, "keywords": "data; implementation; osc; performances; sensors; test", "summary": "In this paper, we investigate the possibility to implement the Orthogonal Signal Correction (OSC) method for compensating the relative humidity effect on MOS sensors. The results achieved proved that the OSC implementation can be a suitable method for the mitigation of the RH interference on MOS sensors, since its application significantly improved the performances of classification, increasing the global accuracy above 70% for both e-noses considered in this study.", "mime": "application/pdf"}, {"id": "cet-12830", "words": "3378", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12830", "date": null, "keywords": "analysis; gas; samples; sberveglieri; sensor; sources; system", "summary": "In the system there is also a pump that transports inside the device volatile compounds from samples. PCA allows to reveal all possible clusters of samples united by similar characteristics within the main components considered in the hyperplane.", "mime": "application/pdf"}, {"id": "cet-12831", "words": "3161", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12831", "date": null, "keywords": "area; city; compounds; concentration; dispersion; odour; period; production; volos", "summary": "Determination of odour concentration by dynamic olfactometry) from the laboratory of ENVIROMETRICS and (b) the data on the flow and temperature of the flue gases and the geometrical characteristics of the chimneys of the installations as provided by the installations themselves. Given the lack of regulatory atmospheric quality limits for odour concentrations, the results of the dispersion model were compared with the British Environment Agency guidelines (98th percentile of hourly peak concentrations C> 1.5 ouE lower case / m3) and the limit values of the German TA Luft Standard (Odour periods: 6-minutes where odours are detectable (C> 1 ouE / m3).", "mime": "application/pdf"}, {"id": "cet-12832", "words": "3960", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12832", "date": null, "keywords": "biosolids; character; emission; odorants; odour; odp; suffet; type; wastewater", "summary": "Conclusions Very little is known about musty odour character emissions from biosolids. 195 Figure 1: Arithmetic mean of odour intensity values belonging to two odorous signals with musty odour character obtained by gas chromatography coupled with olfactory detection port between 3 assessor\u2019s in the emissions from stabilized biosolids cake after anaerobically digestion of wastewater sludge over storage time.", "mime": "application/pdf"}, {"id": "cet-12833", "words": "3081", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12833", "date": null, "keywords": "area; concept; nuisance; odour; sources; survey; urban", "summary": "The results of the survey will form the basis for the initial identification of odour sources in the agglomeration area under investigation. the food industry animal feed industry slaughterhouses and plants for the disposal/processing of animal by-products chemical industry refining industry manufacture of chipboard and particleboard paper industry oils and fats industry tannery industry distribution of fuels waste management wastewater treatment plants the rearing and breeding of pigs, poultry and fur animals management of natural fertilizers gastronomy other odour sources 202 Ta bl e 1: C on ce pt o f a q ue st io nn ai re fo r o do ur n ui sa nc e su rv ey s N o. Q ue st io n An sw er 1 An sw er 2 An sw er 3 An sw er 4 An sw er 5 An sw er 6 An sw er 7 An sw er 8 1.", "mime": "application/pdf"}, {"id": "cet-12834", "words": "2718", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12834", "date": null, "keywords": "analog; board; data; electronic; gas; mox; nose; sensors; values", "summary": "\u2022 CCS811 from ScioSense B.V. (The Netherlands): MOX sensor that returns values for carbon dioxide (CO2), total volatile organic compounds (TVOC) and sensor resistive value. Keywords: metal-oxide sensors (MOX), optical sensors, electronic nose, smartphone, gas sensors.", "mime": "application/pdf"}, {"id": "cet-12835", "words": "3343", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12835", "date": null, "keywords": "compounds; odour; odtv; threshold; values", "summary": "In 1983, two other researchers, Amoore, and Hautala, developed odour threshold values for 214 chemicals (Amoore, Hautala, 1983). 2. Methodology Originally, when the project started in 2014, the purpose of this paper was to develop odour threshold values for only 24 pure compounds.", "mime": "application/pdf"}, {"id": "cet-12836", "words": "3218", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12836", "date": null, "keywords": "h2s; increase; risk; siaap; study; temperature; wastewater", "summary": "The aims of this new work are: 1) to describe the 2000-2021 meteorological and functioning trends that could be affected by climate change (air temperature, wastewater temperature at the entrance of the station, cumulative rainfall, number of dry days) 2) to determine if the observed trends could lead to an increase of H2S major peak emission risk using the correlation established on the previous work 3) to characterize if possible the future trends with the projections of Paris Climate Agency (APC) 2020 report. 3. Results 3.1 Effect of air and water temperatures changes Impact of the air and water temperature evolutions In the SAN indicator study, we highlighted the relationship between the risk of a major H2S peak (> 5 ppm) at the plant entrance as a function of air and wastewater temperature.", "mime": "application/pdf"}, {"id": "cet-12837", "words": "3740", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12837", "date": null, "keywords": "effect; glycerol; husk; plastic; rice; rice husk", "summary": "Prof Soedarto, SH, Tembalang, Semarang 50275, Indonesia ratnawati@che.undip.ac.id Biodegradable plastics were fabricated from rice flour by the extrusion method using glycerol and rice husk powder as the plasticizer and filler, respectively. From an environmental point of view, biodegradable plastic is a better alternative to petroleum-based plastics.", "mime": "application/pdf"}, {"id": "cet-12838", "words": "3316", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12838", "date": null, "keywords": "case; cells; energy; impacts; influenza; pei; potential; process; production; vaccine", "summary": "Total potential environmental impacts of a vaccine production process using Madin Darby Canine Kidney (MDCK) cells per unit of time and unit of mass for each case. This open-source software allows diagnosing processes from an environmental viewpoint by calculating both the output potential impacts and generated potential impacts of the processes (Gonzalez- Delgado et al , 2021).", "mime": "application/pdf"}, {"id": "cet-12839", "words": "3349", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12839", "date": null, "keywords": "color; h2o2; mg*l-1; oxidation; process; removal; wastewater", "summary": "The impact of wastewater matrix on the degradation of pharmaceutically active compounds by oxidation processes including ultraviolet radiation and sulfate radicals. 1. Introduction Dry cleaners wastewater is a type of effluent generated by a wide variety of industrial sectors that require the use of synthetic dyes with recalcitrant compounds (Urbina et al., 2021); worldwide, the emission of this type of wastewater is led by the textile industry with 54% followed by the dyeing industry 21%, paper, and pulp 10%; tanneries and paints with 8% (Samsami et al., 2020).", "mime": "application/pdf"}, {"id": "cet-12840", "words": "3466", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-12840", "date": null, "keywords": "binder; concentration; flow; granulation; granule; rate; simulation; size", "summary": "Figure 3 Effect of binder concentration on granule Size distribution (with consolidation and agglomeration Kernel) 3.3 Impact of binder volumetric flow rate with consolidation and agglomeration Kernel From Table 1 and Figure 4, increasing binder flow rate increases the mean granule size. Figure 5 shows the volume fraction against particle size distribution at a constant binder concentration and binder flow rate under various fluidised air flow rates.", "mime": "application/pdf"}, {"id": "cet-12841", "words": "3626", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12841", "date": null, "keywords": "anode; batteries; biomass; capacity; carbon; energy; husk; ion; lithium; materials; rice; shell; walnut", "summary": "ISBN 978-88-95608-94-5; ISSN 2283-9216 Use of Vegetable Raw Materials as Electrode Materials for Li- Ion Batteries Meruyert Nazhipkyzya,b,c*, Dana Assylkhanovaa,b, Anar Maltaya,b, Balaussa Dinistanovaa,b, Gulmira Tureshovab, Almagul Issanbekovaa,b, Zhanar Kudyarovab a Institute of Combustion Problems, 172 Bogenbai Batyr str., 050012, Almaty, Kazakhstan bAl-Farabi Kazakh National University, 71 Al-Farabi avenue, 050038, Almaty, Kazakhstan cSatbayev University, 22 Satpaev Street, 050000, Almaty, Kazakhstan meruert82@mail.ru Kazakhstan possesses a large scale of cereal crops, bulrush, seeded fruits, grasslands and forests which are significant renewable resources for carbon materials. Carbon materials based on RH, AS has lowest specific capacity in comparison with WSh.", "mime": "application/pdf"}, {"id": "cet-12842", "words": "3657", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12842", "date": null, "keywords": "concentration; h2s; no2; no3; wastewater", "summary": "More specifically, a sharp decrease in H2S headspace concentration was recorded for the first 60 min of assay, followed by a gradual decrease in H2S fate along with the occurrence of lower gas-liquid concentrations gradients. Figure 2: Time course of H2S headspace concentration under different concentrations of N-NO3 - (a), N-NO2 - (b) and activated sludge (100 mg VSS/L)", "mime": "application/pdf"}, {"id": "cet-12843", "words": "4054", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12843", "date": null, "keywords": "air; hexane; inlet; pinene; removal; res; stage; toluene; vocs", "summary": "The reduction in \u03b1-pinene RE was moderated in BR 1, decreasing to 41.5 \u00b1 11.2 %. The reduction in the EBRT to 60 s had little effect on VOC removal in BR 1 and BR 2.", "mime": "application/pdf"}, {"id": "cet-12844", "words": "2703", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12844", "date": null, "keywords": "applications; chemical; figure; gas; nose; sberveglieri; sensors", "summary": "The types of gas sensors used are various and are based on the modification of a physical or chemical parameter caused by the gases themselves. The major upgrades were in the structures and topology of gas sensors and in the analysis of sensor array data.", "mime": "application/pdf"}, {"id": "cet-12845", "words": "3527", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12845", "date": null, "keywords": "ammonia; dilution; figure; humidity; isotherm; nose; sensor; valve", "summary": "Ammonia gas sensor based on electrosynthesized polypyrrole films. Ammonia gas sensors: A comprehensive review.", "mime": "application/pdf"}, {"id": "cet-12846", "words": "1885", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-12846", "date": null, "keywords": "complaints; enose; odour; plant; steel; tata", "summary": "Odour complaints sources Events of odour annoyance in residential areas around the TATA Steel plant in IJmuiden were considered. Figure 3: share of odour complaints by neighborhood on the TATA Steel plan in Ijmuiden in the reference period.", "mime": "application/pdf"}, {"id": "cet-12847", "words": "3749", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12847", "date": null, "keywords": "adsorption; alkaline; asp; cm-1; polymer; quartz; quartz sand; sand; surface; surfactant", "summary": "Figure 4: Surfactant adsorption at different surfactant concentration with alkaline and polymer formulation Figure 5: Reduction of surfactant adsorption for different systems formulated at 2000 ppm 4. The outcomes of this study may result in a decline in surfactant adsorption on quartz sand surface when ASP solution is used instead of surfactant solution alone.", "mime": "application/pdf"}, {"id": "cet-12848", "words": "3445", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12848", "date": null, "keywords": "adsorption; air; capture; dac; energy; \u00b0 c", "summary": "In this work, the previous independent analysis was extended to several Countries around the world with the aim to find the best location for the DAC plant at different ambient air temperatures. Techno-economic assessment of CO2 direct air capture plants, Jour-nal of Cleaner Production 224, 957-980 House K.Z., Baclig A.C., Ranjan M. and et al., 2011.", "mime": "application/pdf"}, {"id": "cet-12849", "words": "3167", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12849", "date": null, "keywords": "chemical; effluent; industry; production; sugar; treatment; wastewater", "summary": "The scope of the present study is based however on the biological treatment of sugar industry wastewater using microorganisms via anaerobic digestion. Temperatures between 31 \u2103 and 41 \u2103 have been reported for other sugar industry wastewater with treated effluent having the lowest range (Kolhe et al., 2009).", "mime": "application/pdf"}, {"id": "cet-12850", "words": "2785", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-12850", "date": null, "keywords": "change; climate; climate change; countries; development; emissions; mexico; sector; transport", "summary": "In particular, Mexico country has great challenges, its efforts have not been sufficient, it lacks adequate infrastructure for the modernization of the sector, it needs to adopt new technologies and less polluting fuels, as well as promote national regulations. These policies contribute to global efforts to limit climate change and Mexico\u2019s own need to maintain energy security, diminish air pollution, and improve the health and well-being of its people.", "mime": "application/pdf"}, {"id": "cet-12851", "words": "3079", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12851", "date": null, "keywords": "chemical; curriculum; design; engineering; impact; process; processes; reactor; students; sustainability", "summary": "Conclusion The two example projects discussed in this paper illustrate the potential of motivating chemical engineering undergraduates to engage in design activity that is aimed at attenuating the environmental footprint associated with process design and operations. Perry, S., Bulatov, I., (2010), \u201cThe influence of new tools in virtual learning environments on the teaching and learning of process design in chemical engineering\u201d, Chemical Engineerin Transactions (21), pp. 1051-1056.", "mime": "application/pdf"}, {"id": "cet-12852", "words": "4247", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-12852", "date": null, "keywords": "batteries; battery; cathode; figure; ion; lib; lithium; materials; processes; recycling", "summary": "Gratz E., Sa Q., Apelian D., Wang Y., 2014, A closed loop process for recycling spent lithium ion batteries, Journal of Power Sources, 262, 255\u2013262. References Beaudet A., Larouche F., Amouzegar K., Bouchard P., Zaghib K., 2020, Key challenges and opportunities for recycling electric vehicle battery materials, Sustainability, 12, 5837.", "mime": "application/pdf"}, {"id": "cet-12853", "words": "3552", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12853", "date": null, "keywords": "energy; optimization; price; production; throughput; time; \u0307 \ufffd; \ufffd \u0307", "summary": "At times with higher energy prices just before or after the minima of the energy prices, the product B is produced at lower throughputs and therefore with a higher energetic efficiency. [-] Batch production 1h \u2013 energy price 2h - energy price 4h \u2013 energy price 8h \u2013 energy price 172.3% 100.0% 100.2% 101.1% 102.7% 155.7% 100.7% 100.7% 100.7% 101.2% 1h \u2013 energy emission 2h \u2013 energy emission 4h \u2013 energy emission 110.1% 111.4% 111.4% 100.0% 100.6% 100.6% 8h \u2013 energy emission 114.4% 101.0% The reference case for this investigation is the batch production case.", "mime": "application/pdf"}, {"id": "cet-12854", "words": "4243", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12854", "date": null, "keywords": "capacity; consumption; energy; power; process; trajectory; \u0307 \ufffd; \ufffd \u0307; \ufffd \u2212", "summary": "Once the process trajectory has been established, the power consumption from the grid \ufffd\u0307\ufffd(\ud835\udc61) is given by the following relationship: \ufffd\u0307\ufffd = { \ufffd\u0307\ufffd \u2212 \ufffd\u0307\ufffd, \ufffd\u0307\ufffd \u2264 \ufffd\u0307\ufffd 0, otherwise (2) The difference \ufffd\u0307\ufffd \u2212 (\ufffd\u0307\ufffd \u2212 \ufffd\u0307\ufffd) is the residual renewable capacity after the allocation of the process. The recovered capacity \ufffd\u0307\ufffd is calculated as follows (the residual capacity is consumed to the maximum possible extent): \ufffd\u0307\ufffd = { \ufffd\u0307\ufffd \u2212 (\ufffd\u0307\ufffd \u2212 \ufffd\u0307\ufffd), \ufffd\u0307\ufffd \u2212 (\ufffd\u0307\ufffd \u2212 \ufffd\u0307\ufffd)\u0307 \u2264 \ufffd\u0307\ufffd \ufffd\u0307\ufffd, otherwise (3) The difference \ufffd\u0307\ufffd = \ufffd\u0307\ufffd \u2212 (\ufffd\u0307\ufffd \u2212 \ufffd\u0307\ufffd) \u2212 \ufffd\u0307\ufffd is the wasted renewable capacity.", "mime": "application/pdf"}, {"id": "cet-12855", "words": "3658", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12855", "date": null, "keywords": "bitterns; et al; magnesium; mass; mg(oh)2; nanoparticles; particles; purity", "summary": "The best antibacterial action was exhibited by Mg(OH)2 particles precipitated from magnesium chloride (MgCl2) solutions. 3.1 Particle granulometry and shapes Volume particle size distributions of Mg(OH)2 particles precipitated from Margi and Galia bitterns under stoichiometric and 20 % OH- hydroxyl ions conditions are presented in Figure 2.", "mime": "application/pdf"}, {"id": "cet-12856", "words": "3733", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-12856", "date": null, "keywords": "biogas; carbon; co2; crop; dioxide; greenhouse; rate", "summary": "This unutilized carbon dioxide can be utilized for greenhouse crop production or sold as feed for the algae production facility Jongerius Ecoduna (Jongerius Ecoduna, 2022), located 400 meters from the biogas upgrading facility. Fast calculation The number of available sun hours per month, shown in Table 1, is utilized to calculate the number of hours in which CO2 can be utilized for greenhouse crop production by multiplying the daily daylight hours by the days in every month.", "mime": "application/pdf"}, {"id": "cet-12857", "words": "3264", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-12857", "date": null, "keywords": "frequency; material; printing; properties; temperature; time", "summary": "The mechanical properties (tension, compression, and bending) of PLA and polyethylene terephthalate glycol (PETG) were increased by increasing printing temperatures (Hsueh et al., 2021). The limit printing conditions (support and extruder temperatures, printing speed) should be set by considering that, once deposited on platform, the extruded material should be at higher temperatures than 120 \u00b0C at least for 1s to realize good bonding between the layers.", "mime": "application/pdf"}, {"id": "cet-12858", "words": "3134", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12858", "date": null, "keywords": "cost; electric; energy; operation; optimization; plant; production; reactor; zeolite", "summary": "Many authors have presented strategies to deal with changing electric energy prices based on the day-ahead (electric) energy price referred to as demand site management e.g. by Leo et al. (2021) or Bree et al. (2018). Production plants as large consumers of electric power can participate in different markets for electric energy.", "mime": "application/pdf"}, {"id": "cet-12859", "words": "3742", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-12859", "date": null, "keywords": "colour; flux; hydrolysates; membrane; permeate; starch; sugar; temperature", "summary": "Membrane processes in different industries have already been analysed, and their benefits have been proved over time (Cassano & Drioli, 2014). Results and Discussion The performance of UF membranes on decolourization and sugar permeability was investigated considering different operating conditions.", "mime": "application/pdf"}, {"id": "cet-12860", "words": "3141", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12860", "date": null, "keywords": "biogas; bulbs; energy; load; power; production; sludge; volume", "summary": "The performance obtained based on the maximum value of the test with LED light bulbs for 110 W, taking into account the expenditure of 0.720 m3 of biogas volume to obtain 4.134 Kw-h of total energy with 0.100 Kw-h of useful energy, is found the value of 2.418 % (Table 4); This value represents a low performance due to the low outlet pressure of the gasholder and probably due to the design of the mixer, which is still being investigated. It was verified after two tests that the power of the electrical energy with 110 W LED light bulbs registered a power of 100.28 W and for 100 W incandescent light bulbs a power of 56.42 W was registered demonstrating effectiveness with less loss of energy power to LED light bulbs.", "mime": "application/pdf"}, {"id": "cet-12861", "words": "3088", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-12861", "date": null, "keywords": "adsorption; capacity; carbon; electrodes; experiments; nitrate", "summary": "Chen, F.-F., et al., Characteristic and model of phosphate adsorption by activated carbon electrodes in capacitive deionization. Carbons obtained from the pyrolysis were used to prepare electrodes and these electrodes were characterized using a number of experimental techniques.", "mime": "application/pdf"}, {"id": "cet-12862", "words": "3745", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12862", "date": null, "keywords": "capture; carbon; case; ccs; co2; cost; risk; sequestration", "summary": "d\u2019Amore F., Mocellin P., Vianello C., Maschio G., Bezzo F., 2018, Economic optimisation of European supply chains for CO2 capture, transport and sequestration, including societal risk analysis and risk mitigation measures, Applied Energy, 223, 401-415. Kalyanarengan Ravi N., van Sint Annaland M., Fransoo J.C., Grievink J., Zondervan E., 2017, Development and implementation of supply chain optimization framework for CO2 capture and storage in the Netherlands, Computers and Chemical Engineering, 102, 40\u201351.", "mime": "application/pdf"}, {"id": "cet-12863", "words": "3455", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-12863", "date": null, "keywords": "carbon; co2; efficiency; energy; fuel; gas; meoh; plant", "summary": "Overall, e-MeOH exhibits an electric energy consumption of 716.1 MW (corresponding to 480 kWh/GJ of MeOH), against 570.1 MW (corresponding to 355 kWh/GJ of MeOH) in the er-MeOH case (i.e., -20 %). For an electricity price of 40 \u20ac/MWh, the MeOH production cost would result equal to 30.5 \u20ac/GJ (e-MeOH) and 18.6 \u20ac/GJ (er-MeOH),", "mime": "application/pdf"}, {"id": "cet-12864", "words": "3662", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12864", "date": null, "keywords": "data; energy; methanol; power; process; production; ress; step; system", "summary": "The optimal mix for energy production was then identified by varying the number of converters for each RES. Hong Y., Eriksson M., Bostr\u00f6m C., Waters R., 2016, Impact of generator stroke length on energy production for a direct drivewave energy converter, Energies 9.", "mime": "application/pdf"}, {"id": "cet-12865", "words": "3851", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12865", "date": null, "keywords": "distillation; infiltration; matter; olive; omw; percolation; solar; technology; treatment", "summary": "Different technologies have been used for OMW treatment. ISBN 978-88-95608-95-2; ISSN 2283-9216 Coupling the Infiltration-Percolation and Solar Distillation Technologies for the Treatment of Olive Mill Wastewater Soufiane Bakri Alaouia,b, Mounia Achakb,c, Younes Chhitid, Fatima Ezzahrae, M'Hamdi Alaouie, Edvina Lamya,* aUniversity of Technology of Compi\u00e8gne, Alliance Sorbonne University, Department of Chemical Enginneering, UTC/ESCOM, EA 4297 TIMR, Centre de recherche Royallieu - CS 60 319 - 60 203 Compi\u00e8gne cedex, France bNational School of Applied Sciences, Choua\u00efb Doukkali University, (LabSIPE), El Jadida, Morocco cMohammed VI Polytechnic University (UM6P), Chemical and Biochemical Sciences, Benguerir, Morocco dNational school of chemistry, University Ibn Tofail, K\u00e9nitra, Morocco eSciences Faculty, University Abdelmalek Essa\u00e2di,T\u00e9touan, Morocco edvina.lamy@utc.fr The current study was carried out to treat the Olive Mill Wastewater (OMW) via a hybrid system that combine the infiltration-percolation system using low-cost natural adsorbents and solar distillation technology.", "mime": "application/pdf"}, {"id": "cet-12866", "words": "3673", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12866", "date": null, "keywords": "electrolysis; energy; gas; hydrogen; indicators; plant; process; processes; production; water", "summary": "Another key performance indicator, specific for hydrogen, is the Levelized Cost of Hydrogen (LCOH), which considers the cost of hydrogen production process and is calculated as the ratio between the net discounted costs over the amount of produced hydrogen (Minutillo et al, 2021). This paper aims at providing reliable data for different hydrogen production processes at an early process design stage.", "mime": "application/pdf"}, {"id": "cet-12867", "words": "3916", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-12867", "date": null, "keywords": "capacity; ccs; cement; co2; cost; malossa; project; scenario; storage; total", "summary": "Italy has good options for CO2 geological storage (CGS) in saline aquifers both onshore and offshore presented by siliciclastic rocks in 14 areas (Donda et al., 2011) and carbonate rocks in 8 areas (Civilie et al., 2013). Civile D., Zecchin M., Forlin E., Donda F., Volpi V., Merson B., Persoglia S., 2013, CO2 geological storage in the Italian carbonate successions.", "mime": "application/pdf"}, {"id": "cet-12868", "words": "3425", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-12868", "date": null, "keywords": "composition; eaf; energy; model; process; recycling; simulation; slag; steel; steelmaking", "summary": "Kumar H., Varma S., 2021, A review on utilization of steel slag in hot mix asphalt, International Journal of Pavement Research and Technology, 14(2), 232-242. Liu J., Li C., Lin C. W., Han L., Ning T., Wu J., Gui H., Luo Z., Liu T.; Lu A., 2020, Use of steel slag and quartz sand\u2010tailing for the preparation of an eco\u2010friendly permeable brick.", "mime": "application/pdf"}, {"id": "cet-12869", "words": "3684", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12869", "date": null, "keywords": "activity; catalysts; fischer; iron; mgcufe; selectivity; synthesis; tropsch", "summary": "Effect of carbon support on Fischer\u2013Tropsch synthesis activity and product distribution over Co-based catalysts. d Universit\u00e0 di Salerno, Dipartimento di Ingegneria Industriale, Fisciano, SA (Italy) eUniversit\u00e0 di Perugia, Dipartimento di Scienze Farmaceutiche, Perugia (Italy) arian.grainca@unimi.it Two different groups of MgCuFe catalysts derived from hydrotalcite-like precursors were prepared through ultrasound-assisted (US) co-precipitation and solvent-free ball milling methods (BM).", "mime": "application/pdf"}, {"id": "cet-12870", "words": "3802", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12870", "date": null, "keywords": "acid; battery; density; discharge; efficiency; energy; flow; objective", "summary": "As a result, higher energy density can be achieved at the expense of lower electrical efficiency. Performance of an environmentally benign acid base flow battery at high energy density.", "mime": "application/pdf"}, {"id": "cet-12871", "words": "3242", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12871", "date": null, "keywords": "data; flow; gas; hydrogen; methane; odorant; odorization; system; tht", "summary": "At this point, hydrogen odorization process was investigated. To solve this problem a system of hydrogen odorization is to implement.", "mime": "application/pdf"}, {"id": "cet-12872", "words": "3344", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-12872", "date": null, "keywords": "analysis; deposition; impact; ito; layer; lca; materials; pvd; replacement; zno", "summary": "The paper presents examples of LCA application to reduce environmental impact by replacement of conventional materials in chemical, biochemical, construction and electrical industry. Environmental impact of analysed TCOs strongly depends on deposition technologies; for the layers deposited by CVD and ALD techniques the main impact is related to energy or nitrogen consumption whereas for PVD to energy and material of TCO.", "mime": "application/pdf"}, {"id": "cet-12873", "words": "3476", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-12873", "date": null, "keywords": "adp; al2o3; htl; mass; rms", "summary": "In recent years increasing research interest was devoted to the utilization of RMS, as real waste bio-feedstock for HTL process, because the volume of production per year is significant, the disposal cost ranges between \u20ac 80 and \u20ac 600 per ton and they are characterized by an organic content between 40 and 90 %w/w. ISBN 978-88-95608-95-2; ISSN 2283-9216 Effect of Microplastics in Hydrothermal Liquefaction (HTL) of Real Municipal Sludge (RMS) Claudia Prestigiacomoa,*, Angelo Siragusab, Vito Armando Laudicinac, Onofrio Scialdone, Alessandro Galiaa a Dipartimento di Ingegneria, Sezione Chimica Ambientale Biomedica Idraulica e dei Materiali, Universit\u00e0 degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy b AMAP s.p.a., Via Volturno, 2 90138 Palermo, Italy c Dipartimento di Scienze Agrarie, Alimentari e Forestali, Universit\u00e0 degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy claudia.prestigiacomo01@unipa.it The work herein was focused to study the effect of the microplastics on the yield and quality of biocrude (BC) produced by hydrothermal liquefaction (HTL) of real municipal sludge (RMS).", "mime": "application/pdf"}, {"id": "cet-12874", "words": "3438", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-12874", "date": null, "keywords": "extraction; model; oil; process; scgs; solvent; time; wt%", "summary": "In this investigation, SCGs oil extraction was maximised by optimising two process parameters, namely, SCGs-to-2-MeTHF ratio and extraction time. Table 5: Analysis of discrepancies on the results for the quadratic regression model for SCGs oil extraction.", "mime": "application/pdf"}, {"id": "cet-12875", "words": "3352", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12875", "date": null, "keywords": "biogas; energy; hydrogen; nm3; process; production; wgs", "summary": "Usage of the standard processes to boost hydrogen production will lead to an increase in greenhouse gases (GHG) emissions. These conditions also favor a higher H2/CO ratio which is essential for hydrogen production.", "mime": "application/pdf"}, {"id": "cet-12876", "words": "3137", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12876", "date": null, "keywords": "ammonia; catalyst; hydrogen; membrane; nh3; pressure; process; purity; separation", "summary": "The performed calculations show that using membrane separation, a H2 purity of around 97 wt% can be achieved. Table 4: Product permeate streams after membrane separation Catalyst loading 40 g/(mol/h) 5 g/(mol/h)", "mime": "application/pdf"}, {"id": "cet-12877", "words": "3632", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-12877", "date": null, "keywords": "engine; exchanger; figure; fluid; heat; phase; pressure; transfer; working", "summary": "Thus, the description of the heat transfer process must be deepened to provide a more accurate view on the overall performance of heat engines and especially the IE engine. Glushenkov M., Kronberg A., Knoke T., Kenig E.Y., 2018, Isobaric expansion engines: new opportunities in energy conversion for heat engines, pumps and compressors, Energies, 11, 154-175.", "mime": "application/pdf"}, {"id": "cet-12878", "words": "4445", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-12878", "date": null, "keywords": "analysis; batteries; battery; chambers; ion; ion batteries; level; lithium; reliability; risk; safety; testing", "summary": "In this article, the focus is precisely on the bases of safety to be applied during battery testing: although tests must be carried out in CE-certified machines (which requires the manufacturer to 181 provide them with a risk analysis), the risks of the machines are not always properly addressed in view of the interfaces they have with the testing site, with other machines and with operators. It is for this reason that this paper proposes the original approach of applying three traditional types of risk analysis to complete and integrate the manufacturers' assessments and to enable battery testing to be carried out safely.", "mime": "application/pdf"}, {"id": "cet-12879", "words": "3755", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-12879", "date": null, "keywords": "bed; catalyst; catalyst bed; conductivity; fts; rate; reaction; temperature", "summary": "This allowed the effect of average thermal conductivity of catalyst bed on potential maximum productivity to be studied. Yes Yes 3. Results and discussion 3.1 Effect of thermal conductivity of catalyst bed Based on the validated FBR model, simulations were performed by enhancing the average thermal conductivity of the catalyst bed to 5 times and 25 times that of the base case.", "mime": "application/pdf"}, {"id": "cet-12880", "words": "3997", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-12880", "date": null, "keywords": "air; equipment; explosion; gas; hazards; hydrogen; process; production; safety; scenarios; system", "summary": "When performing hazards assessment of hydrogen systems, it should be always kept in mind that \u201cair-tight\u201d equipment doesn't necessarily mean also \u201chydrogen-tight\u201d. The potential incident scenarios for hydrogen-producing electrolysers have been studied with a HAZOP analysis, and the most significative ones (with respect to hydrogen hazards) have been listed in Section 4.", "mime": "application/pdf"}, {"id": "cet-12881", "words": "2823", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12881", "date": null, "keywords": "chemical; material; plastic; pyrolysis; recycling; technology; waste", "summary": "The main parameter that controls the pyrolysis of plastic materials is the temperature. The problem is that plastic materials are not suitable for heat exchange since they are insulating materials and therefore the process is complex, especially in terms of temperature homogeneity.", "mime": "application/pdf"}, {"id": "cet-12882", "words": "3009", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-12882", "date": null, "keywords": "cavitation; chemical; coliforms; efficiency; energy; pressure; process; time; treatment; wastewater", "summary": "There are many wastewaters treatment processes that generate negative impacts on the environment and it is necessary to require new forms of treatment, seeking to mitigate said impacts; Thus, in recent years, a physical phenomenon considered harmful has been taken into account, but now it is sought to take advantage of it positively to decontaminate and improve the quality of surface and waste water, we refer to hydrodynamic cavitation. Hydrodynamic cavitation in water treatment is a technology that is on the rise due to its environmental advantages as it does not use chemical products as is done with some traditional methods.", "mime": "application/pdf"}, {"id": "cet-12883", "words": "5077", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-12883", "date": null, "keywords": "africa; capacity; coal; energy; gas; plants; power; south", "summary": "South Africa\u2019s coal consumption was the highest in the world (70.7 %), even higher than China (58.2 %) and India (55.9 %), both of them the biggest consumer of coal in volumes, while South Africa natural gas consumption is very low (3 %). Natural gas is the fastest growing energy source, it will dominate the energy sector for the next 30 years (i.e. 2050).", "mime": "application/pdf"}, {"id": "cet-12884", "words": "3166", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-12884", "date": null, "keywords": "barrier; food; packaging; pet; xps", "summary": "The evaluation scheme used to design the functional barrier for PET food packaging included the following steps: \u2022 determination of NIAS in PC r-PET; \u2022 prediction of NIAS diffusivity by modeling; \u2022 design of the thickness of the functional barrier; \u2022 challenge test with surrogate molecules; \u2022 migration test with food simulants. 3.1 Analysis of NIAS in post-consumer recycled PS The first step was to characterize the NIAS present in PC r-PS.", "mime": "application/pdf"}, {"id": "cet-12885", "words": "3434", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-12885", "date": null, "keywords": "buildings; cost; emissions; energy; grid; hydrogen; system; vila", "summary": "The wide deployment of renewable energies (RES) is fundamental to achieve a sustainable climate situation and the required energy transition. EU Commission, 2021, Proposal for a Directive of the European Parliament and of the council on energy efficiency (recast) <https://ec.europa.eu/info/sites/default/files/ proposal_for_a_directive_on_energy_efficiency_recast.pdf> accessed 11.07.2022 Foley A., Olabi A.G., 2017, Renewable energy technology developments, trends and policy implications that can underpin the drive for global climate change, Renewable & Sustainable Energy Reviews, 68:1112\u201314. IRENA, 2018, Global energy transformation: A Roadmap to 2050 <https://www.irena.org/publications/ 2018/Apr/Global-Energy-Transition-A-Roadmap-to-2050> accessed 16.03.2022.", "mime": "application/pdf"}, {"id": "cet-12886", "words": "3394", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-12886", "date": null, "keywords": "batch; batches; data; process; reaction; time; variable", "summary": "A convenient arrangement for batch process data is therefore a tensor- like one, namely \ud835\udc17[\ud835\udc3c \u00d7 \ud835\udc3d ISBN 978-88-95608-95-2; ISSN 2283-9216 Data Analytics Can Help Reduce Energy Consumption in the Industrial Manufacturing of Specialty Chemicals Francesco Sartoria, Federico Zueccob, Pierantonio Faccoa, Fabrizio Bezzoa, Massimiliano Baroloa,* aCAPE-Lab \u2012 Computer-Aided Process Engineering Laboratory, Department of Industrial Engineering, University of Padova, 35131 Padova PD (Italy) bBASF Italia SpA, Via Pila 6/3, 40037 Pontecchio Marconi BO (Italy) max.barolo@unipd.it Batch processes are operated following recipes that consist of a sequence of steps of given time lengths carried out in different pieces of equipment.", "mime": "application/pdf"}, {"id": "cet-12887", "words": "2712", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-12887", "date": null, "keywords": "ammonium; persulfate; removal; toc; treatment; wastewater", "summary": "Ammonium persulfate has the lowest molecular mass and the highest water solubility (850 g/L) which gives its edge at wastewater treatment at low temperature (Izadifard et al. 2017). 2021).The issue with emerging pollutants could be complicated as they tend to escape the conventional wastewater treatment plants based on biological treatment and, therefore, the development of the complementary methods of wastewater treatment is required (Mergenbayeva and Poulopoulos 2022).", "mime": "application/pdf"}, {"id": "cet-12888", "words": "3507", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-12888", "date": null, "keywords": "adsorbent; adsorption; gas; n2o; process; regeneration; tests; wet; zeolites", "summary": "Yoosefian M., 2017, Powerful greenhouse gas nitrous oxide adsorption onto intrinsic and Pd doped Single walled carbon nanotube, Applied Surface Science, 392, 225\u2013230. Accepted: 30 August 2022 Please cite this article as: Pierro M., Meloni E., Martino M., Pullumbi P., Brandani F., Palma V., 2022, Adsorption of N2O Using Fe-13x Zeolites \u2013 a Possibility to Make a Process Intensification by Using Microwaves for the Regeneration Step, Chemical Engineering Transactions, 96, 241- 246 DOI:10.3303/CET2296041 CHEMICAL ENGINEERING TRANSACTIONS VOL. 96, 2022 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: David Bogle, Flavio Manenti, Piero Salatino Copyright \u00a9 2022, AIDIC Servizi S.r.l. ISBN 978-88-95608-95-2; ISSN 2283-9216 Adsorption of N2O using Fe-13X zeolites \u2013 A Possibility to Make a Process Intensification by Using Microwaves for the Regeneration Step Mariaconcetta Pierroa*, Eugenio Melonia, Marco Martinoa, Pluton Pullumbib, Federico Brandanib, Vincenzo Palmaa aDepartment of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano (SA), Italy bAir Liquide, Paris Innovation Campus,1 Chemin de la Porte des Loges, Les Loges en Josas 78350, France mpierro@unisa.it Nitrous oxide is an effective greenhouse gas, which also greatly contributes to the depletion of the stratospheric ozone.", "mime": "application/pdf"}, {"id": "cet-12889", "words": "3778", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12889", "date": null, "keywords": "biomass; birch; composition; gas; products; pyrolysis; spruce; temperature; wood; yield", "summary": "In general, the liquid products from biomass pyrolysis reach a maximum in the temperature range 400\u2013550 \u00b0C and decrease with further increase of pyrolysis temperature, as the secondary reactions and decompositions dominate, causing enhancement of gas yield at the expense of char and liquid product yields (Akhtar and Saidina Amin 2012). The difference in liquid product yields is partially explained due to higher content of lignin in softwood bark and higher contents of hemicellulose/cellulose in hardwood bark (Garc\u00eca- P\u00e9rez et al. 2007).", "mime": "application/pdf"}, {"id": "cet-12890", "words": "3384", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-12890", "date": null, "keywords": "corrosion; equilibrium; formation; oxygen; pressure; removal; removal efficiency; respect; temperature", "summary": "3.2 Analysis of the removal efficiency, pressure, and temperature with respect to the equilibrium formation of Fe2O3 Figure 1a describes the effects of molecular oxygen removal efficiency and pressure at a constant temperature of 520 \u00b0F. Figure 1b depicts the effects of molecular oxygen removal efficiency and temperature at constant pressure of 800 psia.", "mime": "application/pdf"}, {"id": "cet-12891", "words": "3102", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-12891", "date": null, "keywords": "corrosion; dual; environment; figure; h2s; hydrogen; rate; steel", "summary": "This augmentation in corrosion rate has been linked to the permeability of hydrogen through the wall thickness of alloys, which enhanced mass transfer processes (Chandra et al., 2014; Huenert et al., 2010; Reisert et al., 2021). In the case of the H2S side, the highest concentration and therefore corrosion rate is located at the origin of the x-axis in Figure 3.", "mime": "application/pdf"}, {"id": "cet-12892", "words": "3491", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-12892", "date": null, "keywords": "butanol; membrane; perstraction; phase; process; temperature; water", "summary": "The use of membrane separation processes stands out for being efficient, versatile and environmentally friendly. The aim of this work is to study the temperature effect in the performance extraction of Butanol from ABE solutions in order to optimize butanol extraction and, considering the effect that the temperature has on the transport properties of the aqueous solution and ionic liquid, as well as the effect on the thermodynamic equilibrium at the aqueous solution/ membrane and membrane / ionic liquid.", "mime": "application/pdf"}, {"id": "cet-12893", "words": "3239", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-12893", "date": null, "keywords": "ash; ashes; biomass; flow; gasification; slag; viscosity", "summary": "Synthetic ash #1 Synthetic ash #2 Synthetic ash #3 mol% wt% mol% wt% mol% wt% SiO2 56 46 60 55 66 64 K2O 40 51 20 28 8 12 CaO 4 3 20 17 26 24 Figure 1: (a) calculation of viscosity and liquidus boundary at 1200 \u00b0C, and (b) change of calculated viscosity of synthetic ash #1, #2 and #3 at 900-1500C. 3.2 Sintering of synthetic ash Figure 2(a) shows a synthetic ash pellet collected after premelting treatment. One main objective of proposing synthetic ash compositions and link composition values is to enhance the practical implication of theoretical viscosity prediction.", "mime": "application/pdf"}, {"id": "cet-13048", "words": "3358", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13048", "date": null, "keywords": "acid; copper; electrodes; electrolysis; kolbe", "summary": "A green, cost-effective and safe electrochemical approach for the production of n-docosane with 45% product yield was obtained using Pt-coated copper electrodes. 4.1 Kolbe electrolysis of lauric acid on Pt-coated copper electrodes A set of experiments was carried out utilizing Pt-coated copper electrodes for the decarboxylation of lauric acid, as shown in Table 1.", "mime": "application/pdf"}, {"id": "cet-13049", "words": "4085", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13049", "date": null, "keywords": "h k; k k; mars; model", "summary": "Also in this case, a detailed description of the experimental procedure is reported elsewhere (Concas et al., 2023). According to the literature (Concas et al., 2021b), the mass balance for biomass X, Eq. (1), is written by considering the death term and the growth term that depends on the limiting factors: average light intensity \ud835\udc3c\ud835\udc4e\ud835\udc63, medium pH and nutrient\u2019s concentration, [\ud835\udc36\ud835\udc57] with j representing total inorganic carbon (TIC), nitrogen (TIN), phosphorous (TIP).", "mime": "application/pdf"}, {"id": "cet-13050", "words": "3023", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13050", "date": null, "keywords": "bio; htc; mass; oil; yield", "summary": "As established in literature, liquid and gas yields were barely affected by HTC temperature (Volpe M. et al., 2021). Leme, M. M. V., Venturini, O. J., Lora, E. E. S., Rocha, M. H., Luz, F. C., De Almeida, W., De Moura, D. C. & De Moura, L. F. 2018.", "mime": "application/pdf"}, {"id": "cet-13051", "words": "4022", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13051", "date": null, "keywords": "biomass; furans; glucose; hmf; nb2o5; presence; reaction", "summary": "Catalytic dehydration of glucose Some preliminary runs were carried out to optimize the experimental conditions, concluding that the reaction should be carried out at 180\u00b0C for 1 h in the presence of 24 mL of 2.3 mM of glucose aqueous solution containing 1 g L-1 of Nb2O5 catalyst. The use of microalgae as biomass has several advantages as they grow faster than terrestrial plants, even in non-arable land and in wastewater, leading to its remediation (Lima et al., 2020).", "mime": "application/pdf"}, {"id": "cet-13052", "words": "2845", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13052", "date": null, "keywords": "degradation; design; light; mil-100(fe; photocatalyst; smt; sulfamethazine; wastewater; water", "summary": "( c ) (c) 132 According to the effect on SMT degradation, the operating parameters can be arranged based on the F-value as follows: pH > catalyst dosage > concentration (Samy et al., 2020). The initial concentration of SMT and photocatalyst dosage are set to 10 ppm and 0.25 g/lit, respectively, and are held constant for comparison during SMT degradation.", "mime": "application/pdf"}, {"id": "cet-13053", "words": "3661", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13053", "date": null, "keywords": "acid; candelilla; cycle; impact; life; plant; process; results; scenario; sulfuric; wax", "summary": "The only category where sulfuric acid impact is higher than citric acid is in freshwater ecotoxicity, for 16,337.59 kg 1,4- DCB, due to superficial and underground water contamination from contaminated soil. Thus, there is a trade-off for using citric acid as a substitute for sulfuric acid.", "mime": "application/pdf"}, {"id": "cet-13054", "words": "3394", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13054", "date": null, "keywords": "benzene; catalyst; conversion; hydrogen; methane; reaction; reactor; temperature", "summary": "Mo/HZSM-5 is a catalyst that catalyzes methane conversion through a bifunctional mechanism. c. Figure 3 \u2013 Methane conversion (%) over different temperatures (K) Figure 4 \u2013 ( ) Simulation and ( ) Experimental millimolar flow (mmol/h) of the products from direct non- oxidative methane conversion a) benzene b) ethylene and c) hydrogen.", "mime": "application/pdf"}, {"id": "cet-13055", "words": "4395", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13055", "date": null, "keywords": "biodiversity; component; creek; environment; et al; index; juan; poverty; water; water poverty; wpi", "summary": "Khadka, G., and Pathak, D., 2021, Groundwater potential as an indicator of water poverty index in drought- prone mid-hill region of Nepal Himalaya, Groundwater for Sustainable Development, 12, 1\u201353. The results indicated that water poverty was low in WPI and modified Water Poverty Index (WPI-mB), which indicates favourable environmental conditions for access to water sources and sustainable development measures.", "mime": "application/pdf"}, {"id": "cet-13056", "words": "3887", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-13056", "date": null, "keywords": "angola; coverage; creek; good; index; indicators; juan; medium; quality; water", "summary": "Juan Angola creek does 157 not have good water quality, therefore, it is necessary the establishment action for the recovery of this ecosystem, although the water creek is not used for supply, affects the quality of life, health, sanitation, and biodiversity in the water body. The results showed that poverty, informality, unemployment, and water quality have the greatest effects and impacts on the environmental conditions of the water system.", "mime": "application/pdf"}, {"id": "cet-13057", "words": "3345", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13057", "date": null, "keywords": "aerogels; atz; degradation; et al; ndt; pilot; scale; sps", "summary": "Figure 4: ATZ photocatalytic degradation with a) sPS/NdT and (b) sPS/30ZNT composite aerogel under UV irradiation using the lab-scale and pilot-scale photoreactor. These results indicate that the heterogeneous photocatalytic process based on composite aerogels could be an efficient technology for pesticide degradation.", "mime": "application/pdf"}, {"id": "cet-13058", "words": "3262", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-13058", "date": null, "keywords": "api; damage; embrittlement; factor; hydrogen; inspection; material; methodology; risk", "summary": "Data required for the determination of the damage factor for hydrogen embrittlement Required data Specific information Comments Environmental severity Hydrogen partial pressure Determine the operating pressure and the pressure during start-up, shutdown, and upset conditions Temperature Determine the operating temperature, and the temperature during start-up, shutdown, and upset conditions Materials susceptibility Microstructure, composition, strength Determine what kind of alloy or steel was used to fabricate the component Welds Determine if post-weld heat treatments (PWHT) were performed Component\u2019s history Time since the last inspection Use inspection history to determine the time since the last HE inspection Inspection effectiveness category Determine the effectiveness category for the inspection that has been performed on the component Number of inspections Determine the number of inspections in each effectiveness category that have been performed on the component On-line monitoring Hydrogen probes and/or process variable monitoring Determine the type of proactive monitoring methods employed The following procedure may be used to calculate the damage factor for HE: 167 \u2022 STEP 1 \u2013 Determine the environmental severity (i.e., the potential level of hydrogen uptake) based on hydrogen partial pressure and temperature, using Table 2 (San Marchi and Somerday, 2012). Hydrogen embrittlement (HE) is the main active degrading mechanism in equipment exposed to hydrogenated environments; if not appropriately accounted for, it can cause failures at unexpectedly low stress levels.", "mime": "application/pdf"}, {"id": "cet-13059", "words": "3344", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13059", "date": null, "keywords": "batteries; battery; discharge; lithium; separator; water", "summary": "The cellulose is a natural polymer and due to its excellent performance characteristics, such as good reproducibility, high dielectric constant and excellent chemical and thermal stability it has been considered a good candidate for use in battery separators (Zhang et al., 2014; Liu et al., 2016; Luo et al., 2021). Novel cellulose/polyurethane composite gel polymer electrolyte for high performance lithium batteries.", "mime": "application/pdf"}, {"id": "cet-13060", "words": "3084", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13060", "date": null, "keywords": "acid; biomass; methane; phb; poly(3; production", "summary": "Poly(3-hydroxybutyrate-co- hydroxyvalerate) was reported to have better characteristics compared to poly(3-hydroxybutyrate) (PHB) (Table 1): PHB-co-HV has a lower melting point, allowing a wider thermal processing window, is more flexible, less permeable to water and less crystalline than PHB (Myung et al., 2016). Similar results were previously reported in the literature (Myung et al., 2015), thus confirming the validity of the model implemented (Amabile et al., 2022c).", "mime": "application/pdf"}, {"id": "cet-13061", "words": "3619", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13061", "date": null, "keywords": "biomass; extraction; phb; precipitation; process; recirculation; recovery; simulation; solvent", "summary": "Currently, solvent extraction is the most used method for PHB recovery because it guarantees a high recovery yield and keeps the characteristics of the extracted biopolymer almost unaltered. Therefore, solvent recovery and recirculation are essential to reduce process costs (Jacquel et al., 2008).", "mime": "application/pdf"}, {"id": "cet-13062", "words": "3373", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13062", "date": null, "keywords": "consequences; energy; equipment; gas; hydrogen; liquid; mimah; risk; technologies", "summary": "2.2 Consequences from the loss of containment of hydrogen equipment The MIMAH methodology was applied to the LOC of hydrogen technologies without applying steps 5 and 7 since they are not relevant for this study. Identification of consequences of failure The first step to collect and analyze the different consequence analysis techniques is to identify the consequences that may occur from the LOI and loss of containment (LOC) of hydrogen equipment.", "mime": "application/pdf"}, {"id": "cet-13063", "words": "2680", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13063", "date": null, "keywords": "blends; diesel; kerosene; properties; simdis", "summary": "Table 3 presents the same comparison made for kerosene, but now for diesel S10, and Figure 2 also shows the comparison between SimDis-HT and experimental curves for diesel S10. This increase of space between the points at higher temperatures were also noticed by Meireles in 2017 when the authors compared experimental curves with a prediction software.", "mime": "application/pdf"}, {"id": "cet-13064", "words": "2205", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13064", "date": null, "keywords": "area; bed; current; easa; surface", "summary": "Table 1: Resulting Capacitances of the four granules and their calculated EASAs Single granule Small packed bed Medium packed bed Big packed bed Capacitance (mF) 13.5 10.5 10.1 9.8 EASA (cm2) 67 52 50 49 Figure 2: Cyclic Voltammetries of the four anodes conducted at 100 mV/s. -3200 -2400 -1600 -800 0 800 1600 2400 -0,35 -0,15 Table 2: Bioelectrochemical performance of the cathodic biofilm during the two operating periods Single granule Small packed bed Medium packed bed Big packed bed Average current (\u00b5A) 1152 \u00b1 88 752 \u00b1 66 698 \u00b1 54 427 \u00b1 47 Current peak (\u00b5A) 1824 1195 1129 756 Average current density (\u00b5A/cm2) 17.2 \u00b1 1.3 14.5 \u00b1 1.1 14 \u00b1 1 8.7 \u00b1 0.9 Current Peak density (\u00b5A/cm2) 27.2 23 22.6 15.4 Figures 4-A-B-C-D show how the packed bed negatively influenced the current generation.", "mime": "application/pdf"}, {"id": "cet-13065", "words": "3493", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13065", "date": null, "keywords": "brine; concentration; lithium; phosphate; ppm; precipitation; recovery; salt; solution; temperature", "summary": "The last series of tests was aimed at evaluating the effectiveness of the precipitation process under conditions of lithium concentration below 200 ppm. However, low lithium concentrations of less than 1 g/L do not allow the use of carbonates as precipitation reagents.", "mime": "application/pdf"}, {"id": "cet-13066", "words": "3660", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13066", "date": null, "keywords": "2,6; dcp; degradation; energy; milling; \ud835\udc3d\ud835\udc5a\ud835\udc56\ud835\udc5b", "summary": "Therefore, it can be reasonably assumed that, by considering lower concentrations of 2,6-DCP that are typical of contaminated soils, a complete degradation could be obtained by using much lower doses of energy provided to the soil. Concas A., Pisu M., Cao G., 2020, Mechanochemical immobilization of heavy metals in contaminated soils: a novel mathematical modeling of experimental outcomes, Journal of hazardous materials, 388, 121731.", "mime": "application/pdf"}, {"id": "cet-13067", "words": "3606", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13067", "date": null, "keywords": "angle; contact; ethylene; fluid; pores; reaction; saturation; tce; water", "summary": "Through two-dimensional simulations, a 97% reduction in TCE saturation was obtained due to displacement of the contaminant out of the field of view. In the next images it is possible to observe the TCE saturation in time instant 0.089 seconds for different contact angles: 221 Contact angle: 5\u00ba Contact angle: 30\u00ba Contact angle: 60\u00ba Contact angle: 140\u00ba Figure 2: TCE saturation in time instant 0.089 seconds for different contact angles Comparing the images obtained at the end of the simulation, it is possible to observe that the TCE is more easily drained in the condition of greater contact angle.", "mime": "application/pdf"}, {"id": "cet-13068", "words": "3739", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13068", "date": null, "keywords": "food; packaging; plastic; recycling; sorting; waste", "summary": "Rahimi A., Garcia J.M., 2017, Chemical recycling of waste plastics for new materials production, Nature Reviews Chemistry, 1, 46. Food waste is the overall largest waste fraction.", "mime": "application/pdf"}, {"id": "cet-13069", "words": "3184", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13069", "date": null, "keywords": "api; inspection; management; process; rbi; risk; safety; \ud835\udc52\ud835\udc65\ud835\udc61\ud835\udc50\ud835\udc5c\ud835\udc5f\ud835\udc5f", "summary": "Keywords: gas explosion, risk based inspection, natural gas pipeline, atmospheric corrosion, API 1. A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Sauro Pierucci, Carlo Pirola Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 978-88-95608-97-6; ISSN 2283-9216 The Integrity of Equipment by Setting up RBI and Applying the OBRA Method Karima Bitchikh*, Aboubakar Kertous, Halla Khennous, Meriem Hammal Laboratoire des sciences et techniques de l\u2019environnement (LSTE), Ecole Nationale Polytechnique, Alger, Alg\u00e9rie karima.bitchikh@g.enp.edu.dz Industry professionals rely on increasingly complex infrastructures where risk management is a key issue.", "mime": "application/pdf"}, {"id": "cet-13070", "words": "2831", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13070", "date": null, "keywords": "erosion; factor; fertility; figure; model; soil; study", "summary": "It was found that one of the main causes of erosion is critically low content of humus in the soil in the range of 0.82-1.66 %, so the use of spatial modelling methods can help determine the best management practices to reduce and prevent soil erosion and improve its quality by increasing the content of humus in the soil. The calculation of the S-factor in this study is based on the RUSLE model, RUSLE is an empirically based modelling approach that predicts the long-term average annual rate of soil erosion on slopes using five factors.", "mime": "application/pdf"}, {"id": "cet-13071", "words": "3971", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13071", "date": null, "keywords": "agriculture; cameras; crop; data; dji; multispectral; sensefly; sensing; sensors; uav; uavs", "summary": "Many commercial drones come with different types of camera sensors, for example the DJI Phantom 4 Multispectral comes with a multispectral camera. The data received by UAV sensors can be spectral, spatial and 243 temporal.", "mime": "application/pdf"}, {"id": "cet-13072", "words": "3777", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-13072", "date": null, "keywords": "algae; bio; crude; doi; htl; min; reaction; sargassum; yield", "summary": "Table 1: Comparison of bio-crude yield (% w/v) and HHV (High Heating Value (MJ/kg)) of those bio-crudes in different reaction conditions according to the literature. Table 4.Ultimate analysis obtained for the best result obtained in terms of bio-crude yield and HHV (HTL 60 min).", "mime": "application/pdf"}, {"id": "cet-13073", "words": "3377", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13073", "date": null, "keywords": "irradiation; light; temperature; tio2", "summary": "One method for increasing the activity could be the doping of TiO2 structure, that can induce defects in the semiconductor lattice 255 mailto:osacco@unisa.it and decrease the band-gap energy, increasing the photocatalytic efficiency. Langlet M., Kim A., Audier M., Herrmann J. M. s.d. \u00abSol-Gel Preparation of Photocatalytic TiO2 Films on Polymer Substrates\u00bb, 12.", "mime": "application/pdf"}, {"id": "cet-13074", "words": "2711", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13074", "date": null, "keywords": "conditions; cusco; figure; heritage; humidity; mural; painting; peru; pigments", "summary": "261 1.2 Pigments in colonial mural painting Mural painting practiced in the Andes region during colonial times was typically based on the tempera technique on a dry surface, contrary to the usual fresco used in Europe. Therefore, as a general premise, it can be claimed that hematite requires a low-humidity environment for its conservation in heritage paintings.", "mime": "application/pdf"}, {"id": "cet-13075", "words": "3231", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13075", "date": null, "keywords": "analysis; chalice; chemical; metals; objects; peru; pieces; quality; silver; viceroyalty", "summary": "In this approach, we found viceroyalty silver objects with only copper as a tracer metal, in Ag/Cu ratios from 9 to 34.85. On the other hand, XDR results (see Figure 5 and Table 3) aimed to add information about the crystalline phases that may be present in viceroyalty silver objects.", "mime": "application/pdf"}, {"id": "cet-13076", "words": "3694", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-13076", "date": null, "keywords": "concentration; cov-2; device; et al; recovery; rna; sars; wastewater", "summary": "Design of wastewater concentration device and schematic scheme of experimental design and sampling (created by BioRender.com) 2.3 Performance evaluation of wastewater concentration device During the performance evaluation, tests were done for investigating (1) the attachment of SFV to the microfilter surface (tests were carried out using deionized water instead of wastewater and spiked with SFV particles; the standard protocol of wastewater concentration was applied from 2.2 paragraph and samples were taken for recovery rate analysis); (2) the attachment of SFV to wastewater particles (tests were carried out using microfiltered wastewater instead of untreated wastewater and spiked with SFV particles; samples after microfiltration were not taken; the standard protocol of wastewater concentration device was carried out according to the 2.2 paragraph); (3) the impact of SFV negative charge attachment to wastewater macro- particles (SFV particles were sonicated for 30 sec to reduce viral particle attachment to each other; sonicated particles were added to microfilter treated wastewater; samples after microfiltration were not taken). 2.2 Design of wastewater concentration device The wastewater concentration device design and schematic scheme of sampling are presented in Figure 1.", "mime": "application/pdf"}, {"id": "cet-13077", "words": "3557", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13077", "date": null, "keywords": "co2; engineering; foaming; impregnation; pedot; pressure; scaffolds; temperature; tissue", "summary": "Ishaug S. L., Crane G. M., Miller M. J., Yasko A. W., Yaszemski M. J., Mikos A. G., 1997, Bone formation by three-dimensional stromal osteoblast culture in biodegradable polymer scaffolds, Journal of Biomedical Materials Research, 36(1), 17\u201328. Panti\u0107 M., Knez \u017d., Novak Z., 2016, Supercritical impregnation as a feasible technique for entrapment of fat- soluble vitamins into alginate aerogels, Journal of Non-Crystalline Solids, 432, 519\u2013526.", "mime": "application/pdf"}, {"id": "cet-13078", "words": "3462", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13078", "date": null, "keywords": "acid; biodiesel; esterification; ethanol; ethyl; oleate; oleic; oleic acid; reaction", "summary": "Although the highest conversion of oleic acid was obtained at the 12:1 EOM, the highest ethyl oleate yield (11.13%) was achieved at the 3:1 EOM. 3.2 Effect of EP on esterification reaction products The esterification reaction of oleic acid was conducted using a range of EP (80\u2013100 wt.%) and at 3:1 EOM. The effects of ethanol-to-oleic acid molar ratio and ethanol purity on the yield of biodiesel production were investigated for the esterification of oleic acid.", "mime": "application/pdf"}, {"id": "cet-13079", "words": "3433", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-13079", "date": null, "keywords": "acetate; anaerobic; bar; biogas; ch4; digestion; et al; model; pressure; process", "summary": "Lindeboom R.E.F., Fermoso F.G., Weijma J., Zagt K., and Van Lier J.B., 2011, Autogenerative high pressure digestion: Anaerobic digestion and biogas upgrading in a single step reactor system, Water Science and Technology, 64, 647\u2013653, Lindeboom R.E.F., Ferrer I., Weijma J., and van Lier J.B., 2013, Effect of substrate and cation requirement on anaerobic volatile fatty acid conversion rates at elevated biogas pressure, Bioresource Technology, 150, 60\u201366, Lindeboom R.E.F., Weijma J., and Lier J.B. Van, 2012, High-caloric biogas production by keeping CO2 in solution at autogenerated biogas pressures up to 20 bar, 1\u201317, Lombardi L., and Francini G., 2020, Techno-economic and environmental assessment of the main biogas upgrading technologies, Renewable Energy, 156, 440\u2013458, Mao C., Feng Y., Wang X., and Ren G., 2015, Review on research achievements of biogas from anaerobic digestion, Renewable and Sustainable Energy Reviews, 45, 540\u2013555, Mart\u00edn-Hern\u00e1ndez E., Guerras L.S., and Mart\u00edn M., 2020, Optimal technology selection for the biogas upgrading to biomethane, Journal of Cleaner Production, 267, 122032, Merkle W., Baer K., Lindner J., Zielonka S., Ortloff F., Graf F., Kolb T., Jungbluth T., and Lemmer A., 2017, Influence of pressures up to 50 bar on two-stage anaerobic digestion, Bioresource Technology, 232, 72\u201378, Miltner M., Makaruk A., and Harasek M., 2017, Review on available biogas upgrading technologies and innovations towards advanced solutions, Journal of Cleaner Production, 161, 1329\u20131337, 5 Molino A., Nanna F., Migliori M., Iovane P., Ding Y., and Bikson B., 2013, Experimental and simulation results for biomethane production using peek hollow fiber membrane, Fuel, 112, 489\u2013493, Mulka R., Szulczewski W., Szlachta J., and Mulka M., 2016, Estimation of methane production for batch technology \u2013 A new approach, Renewable Energy, 90, 440\u2013449, Murano R., Maisano N., Selvaggi R., Pappalardo G., and Pecorino B., 2021, Critical issues and opportunities for producing biomethane in Italy, Energies, 14, 1\u201314, Nguyen H.H., 2014, Modelling of food waste digestion using ADM1 integrated with Aspen Plus. In the last years, particular attention has been paid to pressurised anaerobic digestion (PAD), which consists of an AD occurring at a pressure higher than the atmospheric one that can be achieved in continuous reactors (G\u00f3mez Camacho et al., 2019) or batch reactors by the addition of external gas (i.e. N2 or CO2), or by accumulating biogas, which leads to a gradual increase in autogenerated pressure in the headspace of the reactor (Autogenerated High pressure Digestion, AHPD)", "mime": "application/pdf"}, {"id": "cet-13080", "words": "3748", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13080", "date": null, "keywords": "bsg; concentration; ethanol; fermentation; glucose; hydrolysis; pre; saccharification; xylose; yield", "summary": "Nomenclature CBSG \u2013 concentration of dry solid biomass, g L-1 CEtOH \u2013 Ethanol Concentration, g L-1 CS \u2013 Sugar concentration, g L-1 t \u2013 time, h Venz \u2013 enzyme volume injected in the reactor, mL VR \u2013 reactor Volume, L xG \u2013 glucose mass fraction in dried BSG, - xG,enz \u2013 glucose mass fraction in enzyme blend, - xGn \u2013 glucan mass fraction in dried BSG, - YG \u2013 glucose yield, % YEtOH \u2013 ethanol yield, % \u03c1enz \u2013 enzyme density, g mL-1 References Cassells B., Karhumaa K., S\u00e0nchez i Nogu\u00e9 V., Lid\u00e9n G., 2017, Hybrid SSF/SHF Processing of SO2 Pretreated Wheat Straw\u2014Tuning Co-fermentation by Yeast Inoculum Size and Hydrolysis Time. Nevertheless, this paper focuses on glucose concentration because the yeast used in this work is highly selective toward glucose.", "mime": "application/pdf"}, {"id": "cet-13081", "words": "3262", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13081", "date": null, "keywords": "selenium", "summary": "The cellular process of the species involved in selenium reduction should be investigated with the aim to develop a concise structured model. The aim of this study was to also develop a kinetic model to describe the selenite reduction and elemental selenium formation under batch conditions, thereby provided crucial understanding required for scaling.", "mime": "application/pdf"}, {"id": "cet-13082", "words": "4017", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13082", "date": null, "keywords": "bio; biomass; biomass gasification; co2; dfb; gasification; production; psa; steam; syngas", "summary": "Mainly, the DFB technology was developed to commercial scale for biomass steam gasification in a plant in G\u00fcssing, Austria (Pfeifer et al., 2009). Table 1: Biomass gasification technologies (Costa et al., 2021).", "mime": "application/pdf"}, {"id": "cet-13083", "words": "3686", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13083", "date": null, "keywords": "anaerobic; biogas; fermentation; h2o2; pretreatment; production; scfas; sludge; tannery; tests", "summary": "Ambrose H. W., Chin C. T. L., Hong E., Philip L., Suraishkumar G. K., Sen T. K., Khiadani M., 2020, Effect of hybrid (microwave-H2O2) feed sludge pretreatment on single and two-stage anaerobic digestion efficiency of real mixed sewage sludge, Process Safety and Environmental Protection, 136, 194-202. The observed distribution was quite similar to those found in the literature from batch sewage sludge test without a pH-control strategy, thermally, and non-thermally pretreated: (Zhang et al., 2019; Morgan-Sagastume et al., 2015).", "mime": "application/pdf"}, {"id": "cet-13084", "words": "3341", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13084", "date": null, "keywords": "biomass; composition; compounds; htl; hydrothermal; liquefaction; microalgae; oil; process", "summary": "This paper analyses the effect of biomass composition in the HTL to assess its viability to be used to produce biofuels or valuable chemicals. Algae biomass is considered a good renewable energy resource, due to the no competition with food resources and are easily cultivated on various conditions even using wastewater (Mahima et al., 2021).", "mime": "application/pdf"}, {"id": "cet-13085", "words": "4307", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-13085", "date": null, "keywords": "catalyst; ia l2; l2 o; m o; n ia; n o; o o", "summary": "The carbon deposition on the surface of used catalysts is summarized in Figure 5. In the case of the RSS raw material, the composition of the bio-oil changed only slightly at catalyst temperature of 400\u02d8C.", "mime": "application/pdf"}, {"id": "cet-13086", "words": "3452", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13086", "date": null, "keywords": "broth; concentration; fermentation; growth; hydrogen; medium; pnsb; production", "summary": "Although being currently not economically competitive (Ajanovic et al., 2022), hydrogen production via bioprocess is considered to be a promising method in terms of sustainability, due to its mild operative conditions (usually operated at room temperature (Pal et al., 2022), compared to 700\u20131100 \u00b0C of steam reforming (Baeyens et al., 2020)), its minimal net greenhouse gas emissions (Pal et al., 2022), and the possibility to exploit wastes and wastewaters as carbon and energy sources for the microorganisms involved in its production (Rai and Singh, 2016). Further tests should be carried out to correct the operative conditions (lighting system and illuminated surface) or to establish a more effective pretreatment of the fermentative broth, to ensure PNSB growth as well as hydrogen production.", "mime": "application/pdf"}, {"id": "cet-13087", "words": "3550", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13087", "date": null, "keywords": "bed; biomass; loop; peels; reactor; seal; solids; time; tomato; torrefaction", "summary": "Brachi P., 2016a, Fluidized bed torrefaction of agro-industrial residues: the case study of residues from Campania region. The following assumptions hold: - torrefaction occurs in fluidized bed reactor of inert sand particles with a continuous feed of both inert gas, i.e., CO2, and biomass; - the bed aspect ratio is the same as in the study by of Brachi et al. (2016b): HLF/DBED =1.7; - the mass fraction of tomato peels in the biomass-sand binary bed is taken as XTP = 9% wt. since, according to Brachi et al. (2017), beyond this value the fluidization pattern deteriorates; - the mass yield MY is taken as the performance index of the torrefaction treatment; - a reference condition is taken for torrefaction after the work of Brachi et al. (2016b): a torrefaction temperature T = 240 \u00b0C and a torrefaction time \u03c4 = 5 min, in an inert atmosphere; - the torrefaction of tomato peels as a function of temperature and time is accounted for using the experimental correlation by Brachi et al. (2016a): 50 \ud835\udc40\ud835\udc4c", "mime": "application/pdf"}, {"id": "cet-13088", "words": "4626", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13088", "date": null, "keywords": "air; chimney; combustion; efficiency; exp; stove; wood", "summary": "[%] 58 Table 1: Stove efficiencies, and corresponding O2 concentration and chimney inlet temperature In general the efficiencies are higher using EN22. Stove efficiencies of around 80% was achieved for all three stoves, with the highest efficiency achieved for the stove with the highest heat storage capacity.", "mime": "application/pdf"}, {"id": "cet-13089", "words": "4037", "extension": ".pdf", "flesch": "69", "author": null, "title": "cet-13089", "date": null, "keywords": "aut; emissions; en22; fuel; ignition; man; stove; wood", "summary": "1. Introduction Primary measures to reduce emissions from wood stoves include proper installation and maintenance of the stove, using dry, well-seasoned wood, and the use of certified stoves. Overall, proper installation, maintenance, use of dry, well- 61 seasoned wood and using a certified stove are primary measures to reduce emissions from wood stoves.", "mime": "application/pdf"}, {"id": "cet-13090", "words": "3701", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13090", "date": null, "keywords": "acetone; fractionation; kraft; lignin; process; properties; system; temperature; water; weight; yield", "summary": "Among the various solvents and solvent mixtures, acetone\u2013water mixtures offer an energy-efficient, cost-effective, and environmentally friendly means of lignin fractionation. The effects of varying the parameters on lignin fractionation were investigated in terms of yield and molecular weight.", "mime": "application/pdf"}, {"id": "cet-13091", "words": "4242", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13091", "date": null, "keywords": "catalyst; content; gas; moisture; moisture content; steam; yield", "summary": "Figure 5: The change in the yield of (a) gaseous product and the composition of gas (b)-0% moisture content, (c)-20% moisture content, (d)-40% moisture content Focusing on the composition of the gas (Fig. 5 (b)-(d)), at lower temperatures carbon dioxide and lighter hydrocarbons are the dominant components (39.6-75.5 % and 11.6-39.4 %). (a) (b) (c) Figure 3: The change in the (a) yield of gaseous product and the composition of gas ((b)-20% moisture content, (c)-20% moisture content with catalyst and steam) 3.3", "mime": "application/pdf"}, {"id": "cet-13092", "words": "3139", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13092", "date": null, "keywords": "bioplastics; carbonization; htc; hydrothermal; materials; solid", "summary": "Thus, in principle bioplastic waste should be collected together with the OFMSW and treated via biological methods, such as anaerobic digestion or composting, which is their most studied disposal route (Gioia et al., 2021). Due to the increasing awareness regarding the environmental concerns posed by traditional fossil-based plastics, bioplastics are steadily becoming more abundant in different fields (Rosenboom et al., 2022).", "mime": "application/pdf"}, {"id": "cet-13093", "words": "3752", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13093", "date": null, "keywords": "biochar; biogas; cod; digestion; l-1; olive; omw", "summary": "All samples were stored at -20 \u00b0C until anaerobic digestion tests. 1. Introduction Disposal of olive mill wastewater (OMW) on agricultural lands is a controversial question, mostly because of the contrasting effects of OMW on physicochemical (Comegna et al., 2022) and biological (Magdich, 2013) soil properties due to the high organic matter content and the large volumes produced in a short period of time.", "mime": "application/pdf"}, {"id": "cet-13094", "words": "3381", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13094", "date": null, "keywords": "biofoil; bran; malt; malt bran; material; mycelium; ostreatus; wheat; wheat bran", "summary": "This work evaluates the methodology to obtain a biomaterial that replaces expanded polystyrene through mycelium using wheat bran and malt bran as substrates. Regarding the proportions of 75 % of malt bran and 25 % of wheat bran, it was the one that best-achieved colonization by the fungus for both replicates (see Figure 1 (c) - (d)); unlike the other mixtures, this could be favored by the amount of moisture provided by the malt bran, where from a characterization of this, it was observed that it has moisture of 80 %.", "mime": "application/pdf"}, {"id": "cet-13095", "words": "3592", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-13095", "date": null, "keywords": "fermentans; hemp; production; xylitol; xylose", "summary": "K. bacillosporus ATCC 200960, P. fermentans WC 1507, and W. anomalus WC 1501 were the only strains that exhibited xylose generation and were thus selected for deeper investigation of xylitol production. The pulse had the effect of improving xylitol production by K. bacillosporus ATCC 200960 and P. fermentans WC 1507, while the effect on W. anomalus WC 1501 was minor (Figure 1).", "mime": "application/pdf"}, {"id": "cet-13096", "words": "3497", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13096", "date": null, "keywords": "acid; azo; coagulant; coffee; concentration; dyes; removal", "summary": "103 mailto:felipe.correa@profesores.uamerica.edu.co From which valorization alternatives have been developed such as composting, animal feed, production of edible fungi and biogas (Manasa et al., 2021), as well as tests for the removal of cationic dyes from synthetic waters with coffee pulp extracts (Correa et al., 2021). A wide range of high-value technologies have been reported to be used for their removal, including photocatalytic degradation with zinc nanoparticles synthesized in plant extracts (Dihom et al., 2022), advanced oxidation with ozone, ultraviolet radiation (Dadban Shahamat et al., 2022) and microbial electrolytic reactions coupled to plant microbial fuel cells (Liu et al., 2023), for these reasons there have been urgent calls for the treatment of effluents containing azo dye residues to eliminate them or convert them into useful and safe products (Benkhaya et al., 2020).", "mime": "application/pdf"}, {"id": "cet-13097", "words": "3649", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13097", "date": null, "keywords": "bio; crude; energy; htl; phase; process; reactor; reduction; water", "summary": "HTL reaction resulted following mass flow rates for the products according to the experimental results at the same operative conditions: 0.57 kg hr-1 oil phase, 0.216 kg hr-1 gaseous products, 5.18 kg hr-1 water phase containing 0.45 kg hr-1 organics mixture solved in 4.73 kg hr-1 pure water and 0.134 kg hr-1 hydrochar. In another work, Ramos-Tercero et al. (2015) investigated the effect of consecutive water phase recycling in HTL process of a low lipid microalgae (C. vulgaris).", "mime": "application/pdf"}, {"id": "cet-13098", "words": "3652", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-13098", "date": null, "keywords": "burner; d.s; figure; gasification; pressure", "summary": "P1 P2 P3 P1(NR) P1(P) P1(O) 10% 15% 20% 25% 30% 35% 40% 45% 50% 55% 0.35 0.45 0.55 0.65 0.75 C G E \u019b P1 P2 P3 P1(NR) P1(P) P1(O) 118 Despite this, Figure 3 shows similar CGE for the P3 but with lower CC rate. 50% 60% 70% 80% 90% 100% 0.35 0.45 0.55 0.65 0.75 C C ( % ) \u019b P1 P2 P3 P1(NR) P1(P) P1(O) 0.3 0.4 0.5 0.6 0.7 0.8 0.35 0.45 0.55 0.65 0.75 H 2 /C O \u019b P1 P2 P3 P1(NR) P1(P) P1(O) 4 6 8 10 12 14 16 18 20 0.35 0.45 0.55 0.65 0.75 C O M o l/ kg -F u e l \u019b P1 P2 P3 P1(NR) P1(P) P1(O) 0 2 4 6 8 10 12 0.35 0.45 0.55 0.65 0.75 H 2 M o l/ kg -F u e l \u019b P1 P2 P3 P1(NR) P1(P) P1(O) 119 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0.35 0.45 0.55 0.65 0.75 C H 4 M o l/ kg -F u e l \u019b P1 P2 P3 P1(NR) P1(P) P1(O) Figure 6: Methane (left) and carbon dioxide (right), concentrations in Mol/kg-Fuel.", "mime": "application/pdf"}, {"id": "cet-13099", "words": "3715", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13099", "date": null, "keywords": "assessment; attack; detection; intervention; oil&gas; probability; response; security; study; \ud835\udc43(\ud835\udc48", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Sauro Pierucci, Flavio Manenti Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 978-88-95608-98-3; ISSN 2283-9216 Quantitative Evaluation of the Probability of Success of Deliberate Attacks in the Offshore Oil&Gas Industry Matteo Iaiania, Alessandro Tugnolia, Valerio Cozzania, Genserik Reniersb, Ming Yang b,* aLISES - Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Alma Mater Studiorum - Universit\u00e0 di Bologna, via Terracini n.28, 40131 Bologna (Italy) bSafety and Security Science Section, Faculty of Technology, Policy and Management, Delft University of Technology, Delft (the Netherlands) M.Yang-1@tudelft.nl Deliberate attacks (security attacks) pose a significant threat to offshore Oil&Gas critical infrastructures as they have the potential of triggering major event scenarios with severe consequences on people, property, and the surrounding environment. However, as the credibility of security attacks grows, security risk assessments should be approached in a more systematic and quantitative way to measure vulnerabilities and determine the level of protection available in the site.", "mime": "application/pdf"}, {"id": "cet-13100", "words": "3374", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13100", "date": null, "keywords": "concentration; figure; metal; nickel; solutions", "summary": "Nowadays, the Watts nickel solution is the most wildly used and requires a mixture of nickel chloride, nickel sulphate and boric acid with high metal concentration, as far as 100g/L. 127 The ability to monitor the concentration of the Watt solution over time using appropriate sensor ensures, on one hand, the correct and homogeneous distribution of the metal on the chosen substrate and, on the other, it guarantees no leak of Ni, a metal harmful either to the environment and human, from the bath. The calibration curve based on the specific absorbance values is shown in Figure 2b; the R2 value, which is close to 1 (R2=0,99), confirms the high linearity toward metal concentrations.", "mime": "application/pdf"}, {"id": "cet-13101", "words": "3931", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13101", "date": null, "keywords": "case; fuel; gasoline; ignition; methanol; mixture; storage; system; tank; water", "summary": "References AIWAYS, 2020, Methanol fuel cell development, last visit 31/01/2023. Also important is the inerting role of the water in the mixture, which not only limits the flammable range of methanol alone, but also reduces the vapor pressure, resulting in a lower evaporation rate from the puddle than with pure methanol.", "mime": "application/pdf"}, {"id": "cet-13102", "words": "2629", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13102", "date": null, "keywords": "events; failure; fault; figure; hazop; software", "summary": "The main ones are: \u2022 the use of mandatory parameters (temperature, pressure, flow rate, level, composition), \u2022 the use of abbreviations to indicate the type of failure or event (e.g. H.E. = Human Error, etc.) with a series of predefined terms which can anyway be customized by the user, 139 \u2022 the causes must correspond to elementary events, i.e. failures, anomalies, human errors, ..., which can be associated to an expected frequency, \u2022 each event must be associated with the code reported in the P&I in order to obtain the list of critical components and allow MCS equations development, \u2022 for each identified cause an effect or consequence is identified, which may consist of a deviation of another parameter in the same node or in another node, or an ultimate consequence (Top Event), \u2022 the guide words can be used to describe a sequence of effects, each of which will become cause of a further effect, as exemplified in Figure 1 Figure 1: HazOp Worksheet 2.1 Articulation of the file containing the worksheets The HazOp worksheet is divided into 4 sections: 1) parameters, 2) causes, 3) effects, 4) AlbatrosIII allows to obtain the MCSs for each identified Top Event, by providing a summary of the causes (elementary events) with the percentage contribution of each MCS to the frequency of Top Event, as illustrated below.", "mime": "application/pdf"}, {"id": "cet-13103", "words": "3128", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13103", "date": null, "keywords": "baseline; cavitation; chemical; flow; mesh; model; pressure; steam; tube; venturi", "summary": "The present work aims to determine the most critical parameters influencing RANS CFD modelling results for flow cavitation inside Venturi tubes and to provide optimization suggestions for enhancing a baseline Venturi design. Study of Venturi tube geometry on the hydrodynamic cavitation for the generation of microbubbles.", "mime": "application/pdf"}, {"id": "cet-13104", "words": "3437", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13104", "date": null, "keywords": "damage; distances; fire; hydrogen; liquid; loc; set; storage", "summary": "Figure 1: Flowchart of the methodology used for the safety assessment of hydrogen storage vessels for hydrogen-powered buses The first step is the definition of the Storage Unit (SU) and consists into the determination of the volume, the hydrogen mass inventory and the operating conditions (i.e. temperature and pressure) of the storage tank. Cryo-compressed tanks are designed to 151 operate at high pressures and low temperatures and are suitable for both liquid and gaseous hydrogen storage.", "mime": "application/pdf"}, {"id": "cet-13105", "words": "3663", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13105", "date": null, "keywords": "caco3; enzyme; precipitation; soil; solution; urease", "summary": "To overcome this problem, an alternative source of urease enzyme can be employed, such as from plant seeds, particularly, as a new possibility, from soybeans. 2.2 Enzymatic solution (ES): urease extraction Several sources of urease enzyme were tested as derived as agro-food waste: tomato seeds, watermelon seeds, and soybean seeds (the latter expired and therefore not usable for food purposes).", "mime": "application/pdf"}, {"id": "cet-13106", "words": "3502", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13106", "date": null, "keywords": "data; exercises; fatigue; fitness; model; participant; setting; study; tasks", "summary": "Wearable devices provide real-time data on worker physical fatigue levels, allowing employers to respond quickly to any changes in conditions that may increase the risk of accidents in the wokplace. Even with the advancements in technology and automation, repetitive manual work and challenging tasks still strain workers, resulting in physical fatigue and increasing the chances of errors, production delays, and potential accidents.", "mime": "application/pdf"}, {"id": "cet-13107", "words": "3885", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13107", "date": null, "keywords": "ammonia; hydroxide; materials; metal; model; precipitation; recycling; \ud835\udc36\ud835\udc41\ud835\udc3b3", "summary": "Generally, in co-precipitation tests, transition metal sulfates, complexing agents, and sodium hydroxide (NaOH) are added in a stirred reactor under a nitrogen atmosphere that remove dissolved oxygen to avoid unwanted 169 oxidation reactions. Figure 1 Experimental equipment used for co-precipitation tests (a) and reaction mixture evolution during a typical test: at the beginning (b); after the complexing agent addition (c); at the precipitation phase end (d) 2.2 Rigorous simulation model The co-precipitation process has been modelled and simulated on UniSim Design\u00ae R470 using the OLI Engine\u00ae 10.0 package suitable for electrolytic equilibria.", "mime": "application/pdf"}, {"id": "cet-13108", "words": "2645", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13108", "date": null, "keywords": "air; cell; ion; temperature", "summary": "Feng X., Ouyang M., Liu X., Lu L., Xia Y., Hea X., 2018, Thermal runaway mechanism of lithium ion battery for electric vehicles: A review, Energy Storage Materials, 10, 246\u2013267. Wang Q., Ping P., Zhao X., Chub G., Sun J., Chen C., 2012, Thermal runaway caused fire and explosion of lithium ion battery, Journal of Power Sources, 208, 210\u2013224.", "mime": "application/pdf"}, {"id": "cet-13109", "words": "3124", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13109", "date": null, "keywords": "content; htc; hydrochar; process; temperature; time; waste; yield", "summary": "It can also be noted that for high solid content the process severity does not significantly affect carbon yield (Figure 4c). 1. Introduction Global production of municipal solid waste (MSW) is increasing constantly in last years.", "mime": "application/pdf"}, {"id": "cet-13110", "words": "3273", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13110", "date": null, "keywords": "area; assessment; data; process; qra; results; risk; safety; use", "summary": "Failure Rate and Event Data for Use within Risk Assessments. Table 1: Risk Tolerability Criteria Risk Zone Risk Tolerability Criteria (events/year) Low Risk Area Risk < 1\u00b710-6 Medium Risk Area 1\u00b710-6 \u2264 Risk < 1\u00b710-4 Medium-high Risk Area 1\u00b710-4 \u2264 Risk < 1\u00b710-3 High Risk Area Risk \u2265 1\u00b710-3 2.", "mime": "application/pdf"}, {"id": "cet-13111", "words": "3580", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13111", "date": null, "keywords": "conditions; embrittlement; hydrogen; materials; model; properties; stress; susceptibility; tensile; tests", "summary": "The occurrence of hydrogen embrittlement (HE) relies on the synergy of several factors, such as hydrogen concentration, operating conditions, level of internal and applied stress, microstructure and chemical composition of the material. This study can provide critical insights into the susceptibility to hydrogen embrittlement for several materials operating under different environmental conditions.", "mime": "application/pdf"}, {"id": "cet-13112", "words": "3916", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13112", "date": null, "keywords": "accidents; incident; investigation; near; process; risk; root; safety", "summary": "Process Safety Incident Investigation and follow-up Root Cause is defined as \u201ccausal factor with no predecessor that is relevant for the purpose of the analysis\u201d (IEC 62740, 2015): applying this definition within the framework of a Process Safety Management System, a Root Cause can be identified as a deficiency of the Management System that allowed the onset of a causal factor. According to the Center for Chemical Process Safety, a Process Safety Incident is an event that is potentially catastrophic, involving the loss of containment of hazardous materials that can result in large-scale health and environmental consequences (CCPS, 2010).", "mime": "application/pdf"}, {"id": "cet-13113", "words": "3718", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13113", "date": null, "keywords": "adsorbent; adsorption; capacity; concentration; cr(vi; mnps; solution", "summary": "The optimum conditions for Cr(VI) ions adsorption were found to be at pH 4, with contact period of only 30 min at 200 rpm, resulting in 92.9% adsorption efficiency and 99.6% maximum adsorption efficiency after 120 min at 200 rpm, using Cr(VI) ions at concentration of 0.5, 1.0 and 5.0 mg/L. 1. Arabinogalactan (AG) is a polysaccharide, that has high adsorption capacity for Cr(VI) ions.", "mime": "application/pdf"}, {"id": "cet-13114", "words": "4222", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13114", "date": null, "keywords": "area; classification; dust; equipment; explosion; hazardous; plant; process; zone; zoning", "summary": "Dust explosions in the process industries. Dust explosions in totally enclosed interconnected vessel systems.", "mime": "application/pdf"}, {"id": "cet-13115", "words": "3360", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13115", "date": null, "keywords": "formulations; growth; plant; products; shampoo; surfactants; test; toxicity", "summary": "Therefore, plant extracts were used in formulations to reduce the use of toxic synthetic surfactants and to produce safe, renewable and biodegradable formulations, to help solve the challenges related to the damage caused to the environment due to the presence of synthetic surfactants in shampoo formulations and their products. The plant extracts used aimed to reduce the use of toxic synthetic surfactants and to produce safe, renewable and biodegradable formulations, to help solve the challenges related to the damage caused to the environment due to the presence of synthetic surfactants in shampoo formulations and their toxic residues in soils and waters.", "mime": "application/pdf"}, {"id": "cet-13116", "words": "3182", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13116", "date": null, "keywords": "africa; coal; content; emissions; power; sample; south; technology; wt.%", "summary": "This study establishes benchmarks for a complete assessment of various technologies and a roadmap to clean coal technology for South Africa, focusing on SO2 emissions reduction. Therefore, advances in clean coal technology are driven by pollution requirements.", "mime": "application/pdf"}, {"id": "cet-13117", "words": "2751", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13117", "date": null, "keywords": "airflow; boiler; coal; combustion; pressure; sampling; temperature", "summary": "Due to the high mixing degree of pulverized coal and combustion air in tangential boilers, they are mainly used in South African power plants for coal combustion. The combustion air inlet temperature, pressure, density and viscosity of coal vary by boiler level.", "mime": "application/pdf"}, {"id": "cet-13118", "words": "3621", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13118", "date": null, "keywords": "energy; mixes; ress; step; wave; wind; \ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40", "summary": "From Figure 3-panel A, it can be noticed that the minimization of \ud835\udc3a\ud835\udc3a\ud835\udc3a\ud835\udc3a\ud835\udc43\ud835\udc43\ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40\ud835\udc40 prioritizes energy mixes constituted solely by OWTs, given the still high impacts associated with the lifecycle of WECs, especially due to the significant employment of construction materials and the important energy expenses related to the installation phase (Banerjee et al., 2013). Liu Y., Yu S., Zhu Y., Wang D., Liu J., 2018, Modeling, planning, application and management of energy systems for isolated areas: A review, Renewable and Sustainable Energy Reviews, 82, 460\u2013470.", "mime": "application/pdf"}, {"id": "cet-13119", "words": "4007", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13119", "date": null, "keywords": "chemical; company; explosion; plant; plastic; process; pyrolysis; reactor; recycling; safety; waste", "summary": "On October 25, the Company informed that waste plastic pyrolysis activities at the site would be permanently shut down. When temperatures are high enough for pyrolysis gases to form, a valve is opened to a condenser unit in another room, which produces light and heavy oil.", "mime": "application/pdf"}, {"id": "cet-13120", "words": "3533", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-13120", "date": null, "keywords": "analysis; environmental; impact; material; process; product; pvc; use", "summary": "2. Methodology 2.1 Definition of material use This first stage of the research was based on the search for a material with physicomechanical properties like the polymeric synthesis already developed in the laboratory, which was divided into two sub-stages, as follows: Determination of the sector First, a bibliographic review was carried out about the use of type 5 (PP) and kind 6 (EPS) plastics to delimit the sector to which the project should be directed, finding that there are several studies on the reincorporation of plastic waste, such as polyethylene terephthalate, high-density polyethylene, polyvinyl chloride, and polypropylene in different production cycles. In addition, the quantities of raw materials for the process, i.e., recycled PP and EPS, were taken according to the proportion of 90% PP and 10% EPS.", "mime": "application/pdf"}, {"id": "cet-13121", "words": "3739", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13121", "date": null, "keywords": "analysis; explosion; fragments; hydrogen; lh2; tank; vessel", "summary": "Nomenclature vi \u2013 initial velocity, m\u2219s-1 \u03bb \u2013 energy fraction to fragments projection, - Eav \u2013 energy available after the explosion, J Mv \u2013 mass of the empty tank, kg R \u2013 horizontal range of fragment, m \u03b1 \u2013 initial angle of fragment, \u00b0 g \u2013 acceleration of gravity, m\u2219s-2 CL \u2013 lift coefficient, - CD \u2013 drag coefficient, - AL \u2013 lift area, m2 AD \u2013 drag area, m2 FL \u2013 lift force, N FD \u2013 drag force, N \u03c1a \u2013 density of air, kg\u2219m-3 \ufffd\u0305\ufffd \u2013 dimensionless range, - \ud835\udc63\ufffd\u0305\ufffd \u2013 dimensionless initial velocity, - Mf \u2013 mass of fragment, kg 257 Acknowledgments This work was undertaken as part of the research project Safe Hydrogen Fuel Handling and Use for Efficient Implementation (SH2IFT), and the authors would like to acknowledge the financial support of the Research Council of Norway under the ENERGIX programme (Grant No. 280964). The ability to predict the behavior of tank fragments after a failure is valuable for the domino effect handling part of the risk analysis.", "mime": "application/pdf"}, {"id": "cet-13122", "words": "2947", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13122", "date": null, "keywords": "clay; degradation; figure; ldh; light; phenol; photocatalyst; water", "summary": "Figure 4: Phenol degradation efficiencies with varying photocatalyst loading 3.2.3 Effect of pH Figure 5 shows the effect of pH on the extent of phenol degradation. \ud835\udc36\ud835\udc59\u2212 + \u2981\ud835\udc42\ud835\udc3b \u2192 \ud835\udc36\ud835\udc59 + \ud835\udc42\ud835\udc3b\u2212 (1) \ud835\udc36\ud835\udc59\u2212 + \u210e\ud835\udc63\ud835\udc4f + \u2192 \ud835\udc36\ud835\udc59\u2981 (2) 262 Figure 5: Effect of pH on phenol degradation efficiencies 3.3.4 Reaction kinetics and the effect of phenol concentration An increase in phenol concentration from 5 mg/L to 10 mg/L led to a reduction in the extent of phenol degradation from 100% to 73% in 4 h (Figure 6).", "mime": "application/pdf"}, {"id": "cet-13123", "words": "3516", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13123", "date": null, "keywords": "blowouts; case; co2; column; gas; marine; plume; release; sea; subsea; water; water column", "summary": "Several models are proposed in the literature to evaluate the effects arising from marine blowouts: source term models, water column dispersion models and atmospheric dispersion models of the degassing flowrate (Pan and Oldenburg, 2014). Thus, in the present study an assessment of the effects of CO2 blowouts in shallow water has been performed, identifying a set of models and tools available for the analysis of the consequences of subsea gaseous leakages and applying them to specific case studies.", "mime": "application/pdf"}, {"id": "cet-13124", "words": "3962", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13124", "date": null, "keywords": "control; decision; design; elements; human; operators; process; support; system", "summary": "Nachreiner F., Nickel P, Meyer I., 2006, Human factors in process control systems: The design of human- machine interfaces, Safety Science, Volume 44, Issue 1, 5-26. Through this survey, the authors collected responses on the techniques and tools used by the decision makers to make decisions for the evaluation and optimisation of process control room elements, variables and their measures considered during evaluation, and the associated performance indicators for the elements.", "mime": "application/pdf"}, {"id": "cet-13125", "words": "3532", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13125", "date": null, "keywords": "emergency; port; release; resilience; safety; scenarios; simulation; system", "summary": "One reason of complex systems vulnerability lies in their reliance on a large number of interconnected components that are all working together in a coordinated way. Another reason why complex systems are vulnerable is that they are often subject to external perturbations or shocks, such as natural disasters, political crises, or technological failures, acting as \u201cdrivers\u201c, which may affect the normal functioning of the system and lead to disruptions.", "mime": "application/pdf"}, {"id": "cet-13126", "words": "3224", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13126", "date": null, "keywords": "biogenic; carbon; cathode; cell; density; figure; fuel; mfc; pd(0", "summary": "He L., Du P., Chen Y., Lu H., Cheng X., Chang B., Wang, Z. 2017, Advances in microbial fuel cells for wastewater treatment, Renewable and Sustainable Energy Reviews, 71, 388-403. Elsevier, Matsena M. T., Tichapondwa S. M. & Chirwa E. M., 2020, Synthesis of Biogenic Palladium Nanoparticles Using Citrobacter sp. for Application as Anode Electrocatalyst in a Microbial Fuel Cell, Catalysts, 10, 838, https://doi.org/10.3390/catal10080838 Miran W., Jang J., Nawaz M., Shahzad A., Lee D. S., 2018, Sulfate-reducing mixed communities with the ability to generate bioelectricity and degrade textile diazo dye in microbial fuel cells, Journal of Hazardous Materials, 352, 70-79.", "mime": "application/pdf"}, {"id": "cet-13127", "words": "3344", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13127", "date": null, "keywords": "data; events; failure; landslides; model; natech; risk; system", "summary": "It was shown that of landslide event prediction has a considerable impact on the top events probabilities and the dynamically update of the risk precursors represents a relevant safety parameter allowing an early detection of a potential threat. Table 1: classification of landslide events Class (Label) Description Hazard level Nr events 1 Few shallow landslides Moderate hazard 0-1 2 Shallow landslides and rapid mud flows of limited size Medium hazard 2-3 3 Slope instability High hazard 3+ During training and validation, the performance of the model on different datasets is measured, exhibiting a good accuracy, as shown in Figure 2 left-hand side.", "mime": "application/pdf"}, {"id": "cet-13128", "words": "3253", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-13128", "date": null, "keywords": "alginate; flocculant; lubricating; oil; refining; sodium; solvent; waste; yield", "summary": "The indiscriminate disposal of waste lubricating oil into the environment may pose a major threat to the ecology (Sarkar et al., 2022) offering a high risk of damaging the soils, water and air. The negative impacts of inappropriately used oil management on the environment and human health (Botas et al., 2017) necessitate investigations for regeneration of waste lubricating oil to produce new lubricants, promoting a 90% decrease in the environmental problems that can shoot up from the manufacturing of petroleum-derived products (Botas et al., 2017).", "mime": "application/pdf"}, {"id": "cet-13129", "words": "3686", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13129", "date": null, "keywords": "chemical; copper; cuo; energy; oxidation; oxide; reaction; reduction; samples; storage", "summary": "It is worth noting that cerium oxide reduction can occur without the loss of its fluorite structure, i.e. with the formation of a non-stoichiometric CeO2-\uf064 phase (Portarapillo et al., 2022). Copper oxide is an interesting candidate for TCES, but suffers from particle sintering/agglomeration at the high process temperature required by the system.", "mime": "application/pdf"}, {"id": "cet-13130", "words": "3752", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13130", "date": null, "keywords": "acetate; acid; co2; culture; mmol; production", "summary": "More in details the experimental work was conducted using a mixed culture enriched in acetogens by shock treatments, a mixed culture enriched in acetogens with bioaugmentation of A.woodii, and a pure culture of A.woodii., The test conducted at -0.9 V vs SHE with mixed culture showed that acid production was 150 times more predominant than methanogenesis, in fact the low current intensity of -0.5 mA proved to be a key factor in culture mixed to minimize the production of by-product methane. -0.9 V vs SHE with mixed culture", "mime": "application/pdf"}, {"id": "cet-13131", "words": "2638", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-13131", "date": null, "keywords": "application; cemblok; coating; decommissioning; deconpeel; drying; graphite; nuclear", "summary": "In Figure 5, substrate and DeconPeel coating are shown after peeling. The preliminary experimental campaign showed that coating painting could be a feasible option to prevent the spread of highly contaminated graphite dusts during decommissioning of graphite components of nuclear reactors, thus ensuring clean and safe working conditions.", "mime": "application/pdf"}, {"id": "cet-13132", "words": "3659", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13132", "date": null, "keywords": "ch4; co2; conversion; figure; product; ratio; stream", "summary": "Considering the thermodynamic analysis results, using an off-gas stream from a biomethane 20 30 40 50 60 70 80 90 100 50 250 450 650 850 1050 C O 2 C o n v e rs io n ( % ) T (\u02daC) 0% CH4 1% CH4 5% CH4 10% CH4 20% CH4a) 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 50 250 450 650 850 1050 C H 4 ,o u t (k m o l/ h ) T (\u02daC) 0% CH4 1% CH4 5% CH4 10% CH4 20% CH4c) 1.5 2 2.5 3 3.5 4 4.5 5 5.5 650 750 850 950 1050 C O ,o u t (k m o l/ h ) T (\u02daC) 0% CH4 1% CH4 5% CH4 10% CH4 20% CH4 d) 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 700 800 900 1000 1100 H 2 /C O T (\u02daC) 0% CH4 1% CH4 5% CH4 10% CH4 20% CH4 b) 0 10 20 30 40 50 60 70 80 90 100 550 650 750 850 950 1050 C H 4 C o n v e rs io n ( % ) T (\u02daC) 1% CH4 5% CH4 10% CH4 20% CH4a) 0 1 2 3 4 5 6 7 50 250 450 650 850 1050 H 2 ,o u t (k m o l/ h ) T (\u02daC) 0% CH4 1% CH4 5% CH4 10% CH4 20% CH4 b) 323 plant (or a CO2 stream doped with CH4) could be a potential alternative for syngas production, once the possible simultaneous occurrence of the RWGS and the methane bi-reforming reactions allows higher CO2 conversions and the production of higher amounts of CO and H2, while consuming H2O, an unwanted RWGS by product, reducing the need of water condensation before syngas conversion. Alternatively, if a certain process is destined for methane production from CO2, the reaction must be carried out at lower temperatures and higher H2/CO2 ratios (e.g. 3) allowing higher CO2 conversions.", "mime": "application/pdf"}, {"id": "cet-13133", "words": "3024", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13133", "date": null, "keywords": "chlorella; concentration; glucose; growth; kinetic; l-1; mg l-1", "summary": "This value is very small, in the order of mg L-1 as typical for carbohydrate substrates (Doran, 2013). The specific growth rate was observed to increase together with 0.000 0.010 0.020 0.030 0.040 0.050 0 50 100 150 200 250 300 \u00b5 ( h -1 ) S (mg L-1) \u00b5max= 0.047 h-1 K s = 2.06 mg L -1 Figure 4: Kinetic of the removal of glucose from synthetic wastewater with different initial concentration of glucose.", "mime": "application/pdf"}, {"id": "cet-13134", "words": "3919", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13134", "date": null, "keywords": "co2; flue; gas; mea; plant; process; solvent; temperature; water; wte", "summary": "The incineration of biogenic component produces CO2 that does not lead to an increase in atmospheric CO2 levels, so Carbon Capture Utilization and Storage (CCUS) can provide a path to negative CO2 emissions by producing energy and managing locally the produced waste in particular for WtE plants operating on MSW with a significant biogenic component. According to what is reported in the literature, there is a very limited number of WtE plants in the world coupled with a CO2 capture unit that could accomplish the implementation of CCUS.", "mime": "application/pdf"}, {"id": "cet-13135", "words": "3306", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13135", "date": null, "keywords": "api; bbn; corrosion; crude; equipment; low; rul; stress; sulphur", "summary": "The variation of the characteristics of the feed (sulphur and TAN) have been generated with a fairly simple random algorithm, which permits a draw among a number of different crude oils. For these reasons, crude oils with high sulphur content have a lower economic value.", "mime": "application/pdf"}, {"id": "cet-13136", "words": "4007", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-13136", "date": null, "keywords": "accidents; analysis; compressors; events; loading; lpg; quasi; site; storage; unloading", "summary": "In any case, this all suggests that a dedicated research in the future could deepen the 11 5 37 4 8 3 Anomaly on compressors or pumps Other anomaly Anomaly in cylinders Release in unloading Release in loading Release from a pump Release from a compressor 347 role of human factor in safety management in LPG storage sites, starting from a comparison with similar plants. Data mainly refer to machinery failures, instrumentation failures, human errors and maintenance issues related to LPG loading and unloading.", "mime": "application/pdf"}, {"id": "cet-13137", "words": "3843", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13137", "date": null, "keywords": "assessment; effects; equipment; figure; plant; risk; safety; scenarios; security; tool", "summary": "Moreover, the 3D allows to take into consideration the difference of height among different equipment, which is not possible for standard risk assessment tools. The probability of ignition for unintentional scenarios were gathered from the results of the ARAMIS project (de Dianous and Fi\u00e9vez, 2006); the same values were used for intentional attack scenarios, since dedicated values are currently lacking in the literature.", "mime": "application/pdf"}, {"id": "cet-13138", "words": "3980", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13138", "date": null, "keywords": "bio; co2; oil; ratio; reforming; syngas", "summary": "Valle B., Garc\u00eda-G\u00f3mez N., Arandia A., Remiro A., Bilbao J., Gayubo A.G., 2019, Effect of phenols extraction on the behavior of Ni-spinel derived catalyst for raw bio-oil steam reforming, International Journal of Hydrogen Energy, 44, 12593-12603. Steam Reforming (SR) of raw bio-oil (obtained from fast pyrolysis of biomass) is a promising and economically viable technology that is attracting increasing interest (Lopez et al. 2022) as it enables the joint valorization of the complex mixture of oxygenated organic compounds contained in bio-oil avoiding the costly separation of the high water content (Valle et al. 2019).", "mime": "application/pdf"}, {"id": "cet-13139", "words": "3104", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13139", "date": null, "keywords": "data; degradation; heating; models; pyrolysis; temperature; \ud835\udc47\ud835\udc5a\ud835\udc4e\ud835\udc65", "summary": "Linear models to estimate maximum degradation temperature (Tmax) on PS TGA. As a first stage, a visual representation through box plots (25-75% quartiles) describing the mean (\u00b195% confidence intervals), and outliers were analyzed to compare the distributions and observe the influence of heating rate on maximum degradation temperature degradation in PS pyrolysis.", "mime": "application/pdf"}, {"id": "cet-13140", "words": "4532", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13140", "date": null, "keywords": "co2; emissions; fuel; heat; hydrogen; meoh; methanol; pemfc; reforming; system", "summary": "This work investigates the coupling of autothermal oxidative MeOH steam reforming (OSRM) with high temperature PEMFCs (HT-PEMFCs). As an alternative, Liquified Natural Gas (LNG) contains less carbon per unit of energy than conventional fuels, resulting in lower CO2 emissions.", "mime": "application/pdf"}, {"id": "cet-13141", "words": "3254", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13141", "date": null, "keywords": "capture; carbon; co2; gas; heat; hydrogen; process; production", "summary": "Combining this with an offshore plant that allows for direct storage of the captured CO2 capture without major transporting costs could also significantly reduce low carbon hydrogen production costs. Following the raw materials, carbon taxes costs (CWT) have the second most significant impact, almost 30% of the total cost.", "mime": "application/pdf"}, {"id": "cet-13142", "words": "2960", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13142", "date": null, "keywords": "cmc; membranes; method; polysaccharides; solutions; starch; ultrafiltration; water", "summary": "This negative result can be attributed to the particularly high viscosity of starch aqueous solutions. Figures 2 and 3 give respectively the structure of the polymers employed as membrane materials, and the structure of the CMC and starch.", "mime": "application/pdf"}, {"id": "cet-13143", "words": "3417", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13143", "date": null, "keywords": "albumin; biocrude; cellulose; compounds; htl; mixtures; model; oil; waste", "summary": "Material and methods The experiments are carried out using the model compounds alone, their binary and their ternary mixtures as feedstocks for HTL batch reactions. Cellulose, egg albumin and sunflower oil are used as model compounds to represent polysaccharides, proteins, and lipids, respectively.", "mime": "application/pdf"}, {"id": "cet-13144", "words": "2586", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13144", "date": null, "keywords": "energy; eutectic; mixtures; palm; stearin", "summary": "Technologies such as solar thermal energy storage, passive temperature management in buildings, even the development of high-performance sportswear employ various types of PCM. 391 Among the main applications are solar thermal energy storage, sustainable alternative to conventional solvents in organic chemistry, water heating in homes, residential units, hotels, swimming pools, domestic heating, among others (Chwieduk, 2016).", "mime": "application/pdf"}, {"id": "cet-13145", "words": "3025", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13145", "date": null, "keywords": "aspergillus; biodegradation; brasiliensis; density; ldpe; polyethylene", "summary": "While in humus-type soil matrix where microbial interactions by A. brasiliensis and humus-specific microbiota occur, LDPE biodegradation percentages can be obtained for sheets with and without pretreatment of 1.527 and 0.621 respectively, in periods of 3 months (Calcetero and Morales, 2021). The percentages of LDPE biodegradation 3.60 % were evidenced in 10 weeks under conditions such as 6.3 pH, 55% humidity and 20 \u00b0C.", "mime": "application/pdf"}, {"id": "cet-13146", "words": "3969", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13146", "date": null, "keywords": "crude; feed; htl; hydrothermal; leachate; oil; ozonation; ozone; pre; treatment", "summary": "Ozone treatment shows a slight defoaming capacity for the leachate feed but don\u2019t seem to show a significant difference in the HHV of the crude-oils obtained from liquid surfactant. 2.2.2 Hydrothermal liquefaction An Autoclave Engineers' stirred batch reactor (300 ml) was used for HTL treatment.", "mime": "application/pdf"}, {"id": "cet-13147", "words": "3681", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13147", "date": null, "keywords": "bioplastic; fish; gelatin; janitor; materials; response; skin; sorbitol; strength; temperature; tensile; time", "summary": "For the gelatin extraction from janitor fish skin and bones, the Gudmundsson and Hafsteinsson method of fish gelatin extraction was used. Based on the results, it can be concluded that janitor fish skin and bones have the potential to be used as raw material for bioplastic production.", "mime": "application/pdf"}, {"id": "cet-13148", "words": "3512", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13148", "date": null, "keywords": "case; degradation; fire; heat; hydrogen; layer; liquid; mli; pressure; temperature", "summary": "McIntosh, G. E.,1994, Layer by layer MLI calculation using a separated mode equation. In this work, a one-dimensional model to evaluate MLI thermal degradation when a liquid hydrogen tank is exposed to fire is presented.", "mime": "application/pdf"}, {"id": "cet-13149", "words": "3070", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13149", "date": null, "keywords": "ammonia; carbon; energy; fuel; hydrogen; production; qatar; technology", "summary": "It was found that the Middle East and North America are considered to be the optimal regions for blue ammonia production due to their low cost of natural gas and long-term storage capacity for blue ammonia, as shown in Figure 3. 3.5 Blue ammonia at Qatar, a case study Qatar is embarking on constructing the largest blue ammonia plant in the world to diversify and expand its energy sector. Approximately 2% of CO2 emissions from ammonia production come from the conversion of hydrocarbon into H2 through a thermolysis/hydrocracking process during ammonia manufacturing (Cechetto, Di Felice et al. 2021).", "mime": "application/pdf"}, {"id": "cet-13150", "words": "4013", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13150", "date": null, "keywords": "disinfection; distribution; droplets; electrospray; evaporation; liquid; model; size; surface; water", "summary": "For the elimination of surface pathogens droplets between 10 and 100 \uf06dm are usually preferred (e.g., Wood et al., 2021). This result is consistent with the results on SO2 absorption by charged droplets both at the laboratory scale (Di Natale et al., 2016, 2018, 2019) and pilot scale (Di Natale et al., 2022) and has a beneficial effect on surface disinfection processes, because lower evaporation means less reduction of droplets size and lower risk to disperse them as a consequence of the air motion in the surrounding environment.", "mime": "application/pdf"}, {"id": "cet-13151", "words": "4498", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13151", "date": null, "keywords": "heat; hydrogen; liquefaction; pressure; process", "summary": "The main obstacle to gaseous H2 delivery is its low volumetric density, which would lead to excessive dimensions of the storage and transport equipment. H2 liquefaction occurs at about 20 K and atmospheric pressure.", "mime": "application/pdf"}, {"id": "cet-13152", "words": "3302", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-13152", "date": null, "keywords": "health; indicators; management; measure; performance; safety; sms; system", "summary": "References Alruqi, W.M., Hallowell, M.R., 2019, Critical success factors for construction safety: review and meta-analysis of safety leading indicators, J. Constr. Although theorists and researchers have not yet found standard indicators for measuring the SMS performance, they seem to agree in classifying performance indicators into lagging and leading indicators.", "mime": "application/pdf"}, {"id": "cet-13153", "words": "4152", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-13153", "date": null, "keywords": "ared; current; doi; electrodialysis; fujifilm; fumasep; power; pws; reverse; salinity; unit; water", "summary": "Accepted: 13 April 2023 Please cite this article as: Campisi G., Cosenza A., Randazzo S., Tamburini A., Micale G., 2023, Salinity Reduction of Real Produced Waters via Assisted Reverse Electrodialysis, Chemical Engineering Transactions, 99, 445-450 DOI:10.3303/CET2399075 CHEMICAL ENGINEERING TRANSACTIONS VOL. A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Sauro Pierucci, Flavio Manenti Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 978-88-95608-98-3; ISSN 2283-9216 Salinity Reduction of Real Produced Waters via Assisted Reverse Electrodialysis Giovanni Campisia,b, Alessandro Cosenzaa,b, Serena Randazzoa,b, Alessandro Tamburini*a,b, Giorgio Micalea,b aUniversit\u00e0 degli Studi di Palermo, Dipartimento di Ingegneria, viale delle Scienze Ed. 6, 90128, Palermo, Italy.", "mime": "application/pdf"}, {"id": "cet-13154", "words": "3710", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13154", "date": null, "keywords": "co2; dissociation; formation; gas; hydrates; nh4; removal; temperature; water", "summary": "Further steps of the present research will consist of the accurate definition of the proportionality between concentration and inhibiting effect at low NH4 + concentrations and the definition of the NH4 + removal efficiency, via hydrates formation, via analyses of water composition before the formation of hydrates and after their production and removal from the aqueous phase. 4. Results and Discussion Figures 1 \u2013 2 show the pressure \u2013 temperature profile of CO2 hydrates formation and dissociation in presence of 0.5 wt% NH4 +.", "mime": "application/pdf"}, {"id": "cet-13155", "words": "3387", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13155", "date": null, "keywords": "catalyst; co2; cuznzr; hydrocarbons; inzr; methanol; temperature", "summary": "As exhibited in Figure 4, considerably lower methanol yield was obtained with InZr metallic catalyst as compared with CuZnZr. For preparing CuZnZr catalyst, with a Cu:Zn:Zr ratio of 2/1/1, an aqueous solution of Cu(NO3)2, Zn(NO3)2 and ZrO(NO3)2 (1 M) and an aqueous solution of Na2CO3 (1 M) as precipitant agent were prepared, and added dropwise over distilled water at a constant temperature of 70 \u00baC and a pH of 7.", "mime": "application/pdf"}, {"id": "cet-13156", "words": "4089", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13156", "date": null, "keywords": "activity; catalyst; coke; composition; hydrocracking; plastics; properties; regeneration; vol%; waste; wt%", "summary": "Catalyst properties are listed in Table 2. Although the last two can be minimised by correctly adjusting the operating conditions, the first two are inherent phenomena in refinery processes and are therefore the main causes of catalyst deactivation in hydrocracking.", "mime": "application/pdf"}, {"id": "cet-13157", "words": "3061", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13157", "date": null, "keywords": "aerogel; benzene; light; phenol; sps; tio2", "summary": "Fe-N codoped TiO2 photocatalyst, activated both by UV and visible light, was used as catalyst for benzene oxidation reaction. The amount of Fe-N-TiO2 incorporated into the aerogel structure, previously optimized, was 10 wt% (Sacco et al., 2018).", "mime": "application/pdf"}, {"id": "cet-13158", "words": "3759", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-13158", "date": null, "keywords": "design; experiments; kinetic; mbdoe; model; plate; rate; reaction; reactor", "summary": "Figure 6: Reaction rate (a) k2 and (b) k4 as function of the temperature for a simple design plan, the factorial Design of Experiments and the Model-Based Design of Experiments. It is noticeable that the rate constant for reaction step 1 is significantly higher than for step 2, while the activation energies are approximately the same.", "mime": "application/pdf"}, {"id": "cet-13159", "words": "2720", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13159", "date": null, "keywords": "agitation; biodetergent; formulation; oil; production; removal; silva; stability", "summary": "Farias C.B.B., Almeida F.C.G., Silva I.A., Souza T.C., Meira H.M., Soares da Silva R.C.F., Sarubbo, L.A. Production of green surfactants: Market prospects. The evaluated processing condition (agitation times) depending on the volume of the mixing vessel can directly influence the final characteristics of the product after hours of rest.", "mime": "application/pdf"}, {"id": "cet-13160", "words": "3304", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13160", "date": null, "keywords": "adsorption; biosorption; isotherm; metal; p41c; pseudo", "summary": "Adsorption isotherm studies are a necessity for proper comprehension and interpretation of adsorption mechanism pathways; this is essential for the general design and improvement of an adsorption system (Rangabhashiyam et al.,2014). Neither homogenous site energies nor restricted adsorption levels are presupposed by the Freundlich model (Syafiqah and Yussof, 2018); this means that the Freundlich model can describe experimental data for adsorption isotherms whether they occur on homogeneous or heterogeneous sites and it is unaffected by the formation of a monolayer (AL-Aoh et al., 2012).", "mime": "application/pdf"}, {"id": "cet-13161", "words": "2779", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13161", "date": null, "keywords": "induction; milani; rubber; time; vulcanization", "summary": "Rubber vulcanization numerical models The UFREIs considered in this study have been assembled with an NR-EPDM rubber blend. Relation between activation energy and induction in rubber sulfur vulcanization: An experimental study.", "mime": "application/pdf"}, {"id": "cet-13162", "words": "3437", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13162", "date": null, "keywords": "control; octanone; parameters; reactor; temperature; time", "summary": "Increasing the dosing time enhances the process safety because it permits the shift of the RB towards higher setpoint temperatures; this means that it is possible to work at higher temperatures avoiding the loss of temperature control. Finally, another important aspect emerged from Figure 3: temperature controller parameters must not be changed without looking at their corresponding runaway boundaries; this means that they shouldn\u2019t be considered as mere operating parameters which can be set directly online without further investigation.", "mime": "application/pdf"}, {"id": "cet-13163", "words": "2798", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13163", "date": null, "keywords": "catalyst; cracking; light; olefins; production; selectivity; zsm-5", "summary": "Light olefin production was mainly due to hydrogen transfer via carbenium ion and C\u2013C cracking through the \u03b2-scission mechanism during cracking. Fluid catalytic cracking and steam cracking are the key technologies to produce light olefins.", "mime": "application/pdf"}, {"id": "cet-13164", "words": "3364", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13164", "date": null, "keywords": "1%pt; beta; catalysts; chemical; facemask; hydrocracking; use; usy; zeolite", "summary": "The results indicates that USY zeolite was more effective than zeolite beta due to its higher selectivity to liquid products. 2.2 Catalyst preparation For the synthesis of 1% Pt on USY zeolites, a known amount of the Pt precursor tetraamine platinum (II) chloride hydrate was mixed in water (100 ml) and the USY zeolite was added (10 g).", "mime": "application/pdf"}, {"id": "cet-13165", "words": "3939", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13165", "date": null, "keywords": "catalysts; chemical; co3o4; molar; oxidation; samples; srco3", "summary": "Zhang L., Huang S., Deng W., Yang D., Tang Q., Zhu S., Guo L., 2021, Dichloromethane catalytic combustion over Co3O4 catalysts supported on MFI type zeolites, Microporous and Mesoporous Materials, 312, 110599. 522 370gilbarbarin.pdf Catalytic Oxidation of Vinyl Chloride over SrCO3-Co3O4 Catalysts: Effect of the Sr:Co Molar Ratio Thus, the target of this work focuses on examining cobalt oxide catalysts modified with strontium carbonate synthesized through an optimized preparation method based on the Kirkendall effect aimed at obtaining hollow nanotubes, for the oxidative gas phase removal of trace amounts of vinyl chloride (VC), selected as a model chlorinated compound due to its recalcitrant character and wide industrial application.", "mime": "application/pdf"}, {"id": "cet-13166", "words": "4055", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13166", "date": null, "keywords": "boundary; ignition; model; order; system; temperature; values", "summary": "In fact, if properly constructed, ROMs that are based on original physical models can predict system behaviour in areas of parameter space that were not 523 explored during the model's development. To predict and understand the effect of steep changes of the state variables on such systems, a reaction-diffusion model is employed.", "mime": "application/pdf"}, {"id": "cet-13167", "words": "3069", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13167", "date": null, "keywords": "design; distribution; fluid; mtr; reaction; temperature; tube", "summary": "Effects of multi-tube arrangement of lattice, concentric circles and single circle, shell cross-sectional shape of circle, rectangle and ring, and reaction tubes with or without catalyst-free inert sections on the reactor performance were investigated by CFD. 3.3 Step 2: MTR design Since the production volume of the double-tubular reactor designed in the previous section was 54.3 g/day, the number of reaction tubes required to achieve the target production volume is 25.", "mime": "application/pdf"}, {"id": "cet-13168", "words": "3196", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13168", "date": null, "keywords": "catalysts; methane; precursors; spinel", "summary": "An innovative approach for Ni catalyst synthesis is to introduce the transition metal into the structure of a crystalline precursor oxide such as the nickel aluminate spinel NiAl2O4 (L\u00f3pez-Fonseca et al., 2012). Based Catalysts for Partial Oxidation of Methane, Applied Catalysis B: Environmental, 209, 128-138.", "mime": "application/pdf"}, {"id": "cet-13169", "words": "2575", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13169", "date": null, "keywords": "fiber; figure; isolator; milani; rubber; vulcanization", "summary": "Relation between activation energy and induction in rubber sulfur vulcanization: An experimental study. Figure 4: FE model of the steel mold for the vulcanization of UFREI (a) and rubber device with the two reference points for the evaluation of the temperature profile (b-c) 544 Subsequently, the analysis started, and the evolution of the temperature of two control points of the rubber device, one in the core (RP1) and one in the corner (RP2) (Figure 4c), have been monitored for 18000 seconds.", "mime": "application/pdf"}, {"id": "cet-13170", "words": "3540", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13170", "date": null, "keywords": "air; carbon; carbon dioxide; dioxide; heat; table; temperature", "summary": "EF was the author of an article titled \u201cCircumstances affecting the Heat of the Sun\u2019s Rays\u201d which contains some statements about a higher temperature increase of carbon dioxide with respect to air when heated by the sun's rays. This article is considered by some science historians as the first experimental proof of the greenhouse effect of carbon dioxide, a theme that is mentioned by the media every day.", "mime": "application/pdf"}, {"id": "cet-13171", "words": "3447", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13171", "date": null, "keywords": "classes; coalescence; cpi; design; droplets; igf; oil; treatment; volume; water", "summary": "Similarly, HC is not able to process an inlet with oil droplets larger than 200 \u00b5m. The purpose of the primary treatment is to remove small oil droplets and suspended solids and is usually performed through API, parallel plate\u2019s interceptors or skim tanks.", "mime": "application/pdf"}, {"id": "cet-13172", "words": "3794", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13172", "date": null, "keywords": "cavitation; chemical; effluents; energy; et al; metals; pressure; process; treatment; wastewater", "summary": "Ecological footprint, http://habitat.aq.upm.es/temas/a-huella-ecologica.html Mancuso G., Langone M., Andreottola G., 2020, A critical review of the current technologies in wastewater treatment plants by using hydrodynamic cavitation process: Principles and applications. Investigation on liquid emulsion membrane (LEM) prepared with hydrodynamic cavitation process for cobalt (II) extraction from wastewater.", "mime": "application/pdf"}, {"id": "cet-13173", "words": "4438", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13173", "date": null, "keywords": "crystallizer; k2so4; kcl; model; plant; precipitation; process; production; simulation; stream", "summary": "Consequently, evaluating the Oslo start-up phase in the worst-case scenario (7 g/L of sulfate ions in the feed stream), 30 kg of K2SO4 crystals were obtained. Furthermore, the presence of KCl influences the precipitation of K2SO4, i.e. the saturation limit of K2SO4 decreases from 115 g/L to 11.7 g/L at 30\u00b0C (Liu et al., 2015).", "mime": "application/pdf"}, {"id": "cet-13174", "words": "2999", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13174", "date": null, "keywords": "cm-1; ethanol; fermentation; glucose; pls; raman; samples; spectra; spectroscopy", "summary": "Among the emerging techniques, Raman spectroscopy represents a promising methodology for monitoring biotechnological systems due to important features such as speed, high signal-to-noise ratio, good resolution, ability to provide a stable signal, and low water interference (\u00c1vila et al., 2012; Cla\u00dfen et al., 2017). In this study, Raman spectroscopy was employed to monitor ethanol and glucose concentrations during the fermentation of the glucose obtained from the acid hydrolysis of brewer\u2019s spent grain (Lisci et al., 2022).", "mime": "application/pdf"}, {"id": "cet-13175", "words": "3589", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13175", "date": null, "keywords": "fuel; heat; model; plant; power; ship; sofc; temperature", "summary": "Energy, 194 Cigolotti, V., Genovese, M., & Fragiacomo, P., 2021, Comprehensive review on fuel cell technology for stationary applications as sustainable and efficient poly-generation energy systems. Informa UK Ltd. Kumar Singla, M., Nijhawan, P., & Singh Oberoi, A., n.d., Hydrogen fuel and fuel cell technology for cleaner future: a review Martins, A. H., 2022, Biomass gasification as a way of producing green hydrogen: modelling and simulation in Aspen Plus\u00ae., master\u2019s dissertation, Faculdade de Engenharia, Universidade Do Porto, Porto, Portugal McPhail, S. J., Kiviaho, J., & Conti, B., 2022, The yellow pages of SOFC technology.", "mime": "application/pdf"}, {"id": "cet-13176", "words": "3438", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13176", "date": null, "keywords": "controller; design; deviation; energy; function; objective; optimization; power; system", "summary": "The evaluation of the impact of controller design on the performance of a power generation cycle with integrated energy storage was assessed using a dynamic model of the system. Power plant model The model considered in this work is a steam Rankine cycle, with a 100 MW nominal capacity turbine neglecting any generator losses, coupled to an indirect thermal energy storage system using molten salt as the storage medium, as shown in figure 1.", "mime": "application/pdf"}, {"id": "cet-13177", "words": "2897", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13177", "date": null, "keywords": "carbon; \u0305\u0305 \u0305\u0305; \u2206\ud835\udc4b\ud835\udc3a; \u2219 \ud835\udc36\ud835\udc46; \ud835\udc36\ud835\udc36\ud835\udc43\ud835\udc45", "summary": "\ud835\udc36\ud835\udc46 = (\ud835\udc5e\ud835\udc46\ud835\udc5c\ud835\udc65,\ud835\udc4e\ud835\udc5b + \ud835\udc5e\ud835\udc5a) \ufffd\u0305\ufffd(\ud835\udc61) + \ud835\udc47\ud835\udc36\ud835\udc60\ud835\udc5c\ud835\udc59\ud835\udc4b \u0305\u0305 \u0305\u0305 \u0305\u0305 \u0305\u0305 (\ud835\udc61) + \ud835\udc36\ud835\udc36\ud835\udc43\ud835\udc45 \u2219 \ud835\udc36\ud835\udc43\ud835\udc45\ud835\udc4b \u0305\u0305 \u0305\u0305 \u0305\u0305 \u0305(\ud835\udc61) \ud835\udc36\ud835\udc46 \u2219 \ufffd\u0305\ufffd(\ud835\udc61) , (15) where the summand relating to the total carbon content in off-gas and solutes turns into \ud835\udc47\ud835\udc36\ud835\udc60\ud835\udc5c\ud835\udc59\ud835\udc4b \u0305\u0305 \u0305\u0305 \u0305\u0305 \u0305\u0305 (\ud835\udc61) + \ud835\udc36\ud835\udc36\ud835\udc43\ud835\udc45 \u2219 \ud835\udc36\ud835\udc43\ud835\udc45\ud835\udc4b \u0305\u0305 \u0305\u0305 \u0305\u0305 \u0305(\ud835\udc61) \ud835\udc36\ud835\udc46 \u2219 \ufffd\u0305\ufffd(\ud835\udc61) = \ud835\udc47\ud835\udc36\ud835\udc60\ud835\udc5c\ud835\udc59(\ud835\udc61) \ud835\udc4b(\ud835\udc61) \u2219 \u2206\ud835\udc61 \u2219 \u2206\ud835\udc4b\ud835\udc3a \u2206\ud835\udc61 \u2219 1 \ud835\udc4b(\ud835\udc61) \u2219 \ud835\udc36\ud835\udc46 + \ud835\udc36\ud835\udc36\ud835\udc43\ud835\udc45 \u2219 \u222b \ud835\udc36\ud835\udc43\ud835\udc45(\ud835\udc61\u2217) \u2219 \ud835\udc51\ud835\udc61\u2217\ud835\udc61 \ud835\udc610 \ud835\udc4b(\ud835\udc61) \u2219 \u2206\ud835\udc61 \u2219 \u2206\ud835\udc4b\ud835\udc3a \u2206\ud835\udc61 \u2219 1 \ud835\udc4b(\ud835\udc61) \u2219 \ud835\udc36\ud835\udc46 \u2192 \ud835\udc47\ud835\udc36\ud835\udc60\ud835\udc5c\ud835\udc59(\ud835\udc61) \u2206\ud835\udc4b\ud835\udc3a \u2219 \ud835\udc36\ud835\udc46 + \ud835\udc36\ud835\udc36\ud835\udc43\ud835\udc45 \u2219 \u222b \ud835\udc36\ud835\udc43\ud835\udc45(\ud835\udc61\u2217) The final estimated form (\ufffd\u0302\ufffd\ud835\udc56) is then dependent on a fuzzy rule \ufffd\u0302\ufffd\ud835\udc56 = { \ufffd\u0302\ufffd\ud835\udc56 = 0, \ud835\udc56\ud835\udc53 \ufffd\u0302\ufffd\ud835\udc56 \u2217 \u2264 0 \ufffd\u0302\ufffd\ud835\udc56 = \ufffd\u0302\ufffd\ud835\udc56 \u2217, \ud835\udc5c\ud835\udc61\u210e\ud835\udc52\ud835\udc5f\ud835\udc64\ud835\udc56\ud835\udc60\ud835\udc52 , (24) 3. where the logical condition assures the validity of the boundary condition, i.e., the computed glucose concentration is always non-negative.", "mime": "application/pdf"}, {"id": "cet-13178", "words": "3184", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13178", "date": null, "keywords": "acid; pla; production; \u2212 \ud835\udc38\ud835\udc41\ud835\udc37; \u2212 \ud835\udc45; \ud835\udc37 \u2212; \ud835\udc3b2\ud835\udc42; \ud835\udc3f \u2212; \ud835\udc3f\ud835\udc34 \u2212", "summary": "Derabli B., Nancib A., Nancib N., An\u00edbal J., Raposo S., Rodrigues B., Boudrant J., 2022, Opuntia ficus indica waste as a cost-effective carbon source for lactic acid production by Lactobacillus plantarum, Food Chemistry, 370. El-Sheshtawy H.S., Fahim I., Hosny M., El-Badry M.A., 2022, Optimization of lactic acid production from agro- industrial wastes produced by Kosakonia cowanii, Current Research in Green and Sustainable Chemistry, 5.", "mime": "application/pdf"}, {"id": "cet-13179", "words": "2952", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13179", "date": null, "keywords": "analysis; ckp; correlation; data; database; jus; tpt; variables", "summary": "Modern techniques on the data-driven, such as data analysis and artificial intelligence are currently considered the best options for this purpose. Modern technologies such as artificial intelligence (AI), along with cloud computing and data analysis, are currently considered the best shot to perform fault detection and process optimization (Marins et al. (2021), Sircar et al. (2021), Verheyleweghen and J\u00e4schke (2018), Dhaif et al. (2021)).", "mime": "application/pdf"}, {"id": "cet-13180", "words": "4145", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13180", "date": null, "keywords": "additive; control; flow; fluid; rate; system; \ud835\udc44\ud835\udc34 \ud835\udc63", "summary": "Figure 4b shows the time trend of additive flow rate, that is, the manipulated variable. Note that MD was 610 previously evaluated from the results of extensive CFD simulations, as a function of z, for a volumetric flow rate of vector fluid equal to 200 L/min and for three different values of additive fluid flow rate, i.e., 1, 10 and 20", "mime": "application/pdf"}, {"id": "cet-13181", "words": "3987", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13181", "date": null, "keywords": "analysis; aviation; biokerosene; energy; fuel; hydrogen; oil; price; production; route; soybean; usd", "summary": "Verma D., Kumar R., Rana B. S, Sinha A. K, 2011, Aviation fuel production from lipids by a single-step route using hierarchical mesoporous zeolites, Energy environ. Pearlson M., Wollersheim C., Hileman J., 2013, A techno-economic review of hydroprocessed Renewable esters and fatty acids for jet fuel production, Biofuels, Bioproducts And Biorefining, 7, 89-96.", "mime": "application/pdf"}, {"id": "cet-13182", "words": "3363", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13182", "date": null, "keywords": "coro; cost; optimization; process; simulation; software; user", "summary": "Thus, process simulation software can be an invaluable tool to compare alternatives during the preliminary stages of the project. NET, which is necessary for updating variable\u2019 values during process optimization.", "mime": "application/pdf"}, {"id": "cet-13183", "words": "2573", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13183", "date": null, "keywords": "algorithm; case; figure; optimization; problem; set; study; system; time", "summary": "The proposed library for such development is NLopt, an open-source collection of optimization algorithms that can be implemented in C++ and Python languages. NLopt was chosen as the optimization tool, which is a free/open-source library for nonlinear optimization, providing one interface for several free optimization routines available online as well as original implementations of various other algorithms.", "mime": "application/pdf"}, {"id": "cet-13184", "words": "3211", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13184", "date": null, "keywords": "biogas; ch4; co2; reforming; \ud835\udc36\ud835\udc422", "summary": "It was also possible to compare DR and BR for catalytic biogas reforming process. Figure 2 - Pressure effect on DR process in terms of a) CH4 conversion; and b) CO2 conversion.", "mime": "application/pdf"}, {"id": "cet-13185", "words": "3032", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13185", "date": null, "keywords": "constraint; control; hazop; process; reactor; safety; temperature", "summary": "Leveson and Stephanopoulos (2014) presented a new perspective to process safety based on a control-inspired view, highlighting process safety as constraints in the control system, and failures represent violations of the safety constraints. Recently a new approach to process safety, based on a control-inspired view has gained attention, such as embedding model predictive control (MPC) with safety constraints developed from qualitative safety principles, for instance, HAZOP (Hazard and Operability study).", "mime": "application/pdf"}, {"id": "cet-13186", "words": "4027", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13186", "date": null, "keywords": "alcohol; beer; brew; brewing; content; process; production; table; treatments; water", "summary": "Francesco G., Sannino C., Sileoni V., Marconi O., Filippucci S., Tasselli G., Turchetti B., 2018, Mrakia gelida in brewing process: An innovative production of low alcohol beer using a psychrophilic yeast strain. Thus, the fermentation time was 7 and 3 days for the control and diluted beer treatments, respectively.", "mime": "application/pdf"}, {"id": "cet-13187", "words": "3776", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13187", "date": null, "keywords": "coke; coke oven; control; flow; gas; oven; oven gas; process; purification; water", "summary": "During coke production, coke oven gas is formed from the volatile content of the coal blend. The main part of the fuel consumption of integrated steel plants can be ensured by the continuously formed and properly purified by-product gases, such as blast furnace gas or coke oven gas.", "mime": "application/pdf"}, {"id": "cet-13188", "words": "3223", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13188", "date": null, "keywords": "analysis; case; chemical; energy; flexibility; methanol; plant; power; process", "summary": "In the first case, methanol production, and thus the associated income, doesn\u2019t change since energy related variables don\u2019t affect the plant power side. The case study plant is a 4MW power plant to design that would be located in Lazio and whose detailed properties in terms of process parameters and uncertain variables are better described in the following subsections.", "mime": "application/pdf"}, {"id": "cet-13189", "words": "2980", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13189", "date": null, "keywords": "control; crystal; crystalliser; model; mpc; rate; size; system", "summary": "In this work, we wish to showcase the possibility of controlling a crystallisation process using model predictive control to enable the production of crystal products with desired particle diameter distribution and crystalline product average size. The MPC (model predictive control) as an advanced control algorithm can be a solution to this.", "mime": "application/pdf"}, {"id": "cet-13190", "words": "4311", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13190", "date": null, "keywords": "combustion; cremation; crematorium; energy; heat; nardin; recovery; temple; total", "summary": "2. Balance of thermal energies and power of a cremation line Figure 1 presents the scheme for a generic cremation plant. In some cases, in Northern European countries where cremation is widespread, the recovery of thermal energy is used in the immediate vicinity of the cemetery area.", "mime": "application/pdf"}, {"id": "cet-13191", "words": "2604", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13191", "date": null, "keywords": "biogas; conditioning; costs; psa; pswa; syngas; unit", "summary": "For the equipment costs, the variation of reforming section costs is more significant than the syngas conditioning expenses (an increase of 10% of reformer costs, compared to a decrease of around 1% for the syngas condition equipment cost). A sensitivity analysis on the most biogas composition was performed to study the impact on process costs and technical parameters.", "mime": "application/pdf"}, {"id": "cet-13192", "words": "3338", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-13192", "date": null, "keywords": "fat; naoh; ratio; sodalite; spectra; table; zeolite", "summary": "It has been reported that the at ~870cm\u20131 the shoulder band, which appears in the spectra of the three mixtures, is attributed to the vibration of T\u2013OH bonds of the amorphous precursor, during the formation of zeolite A and zeolite X (Shigemoto, et al.,1995). These four samples are made up exclusively of zeolite A and zeolite X (Table 4), although as noted above, ZM-07 also has two different variants of production.", "mime": "application/pdf"}, {"id": "cet-13193", "words": "3077", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13193", "date": null, "keywords": "chemical; reaction; recycling; temperature; v2o5", "summary": "PS reformation using V2O5/V2O4 as a redox catalyst is thermodynamically beneficial because the main reactions in the process are exothermic: \u0394H = -54.5 kJ/mol-C for Eq(3) and \u0394H = -247.0 kJ/mol-O for Eq(9). Nomenclature nC,gas \u2013 quantity of carbon atoms in the gas, mol nCO \u2013 quantity of CO in gas, mol nCO2 \u2013 quantity of CO2 in gas, mol nC,polymer \u2013 quantity of carbon atom in polymer, mol SCO \u2013 CO selectivity, % wPS \u2013 weight of PS, % wV2O5 \u2013 weight of V2O5, % w* V2O5/PS \u2013 scale weight rate of V2O5/PS, % XC \u2013 carbon yield, % XCO \u2013 CO yield, % XV2O5 \u2013 fraction of consumed V2O5, % XC \u2013 carbon conversion, % \u0394H \u2013 enthalpy of reaction, kJ/mol \u03c9 \u2013 scaling factor of w* V2O5/PS, - References Achilias D.S., Kanellopoulou I., Megalokonomos P., Antonakou E., Lappas A.A., 2007, Chemical recycling of polystyrene by pyrolysis: Potential use of the liquid product for the reproduction of polymer, Macromolecular Materials and Engineering, 292, 923\u2013934.", "mime": "application/pdf"}, {"id": "cet-13194", "words": "3295", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13194", "date": null, "keywords": "biomass; cell; soec; syngas; temperature", "summary": "Overall efficiency ( en\uf068 ) 2 2 100 SYGN SYGN H H en T,SOEC T,GAS EFB EFB N LHV N LHV W Q Q M LHV \uf068 + = \uf0d7 + + + (30) 3. Results and discussions 3.1 Effect of cell temperature of SOEC on overall IBG-SOEC performance In this section, the effect of cell temperature of SOEC on the IBG-SOEC performance was investigated by varying the cell temperature in a range of 700-850 \u00b0C at constant number of cells of 400. Thailand b Department of Basic Science and Physical Education, Faculty of Science at Sriracha, Kasetsart University Sriracha Campus, Chonburi 20230, Thailand c Program in Food Process Engineering, School of Food-Industry, King Mongkut\u2019s Institute of Technology Ladkrabang, Bangkok 10520, Thailand karittha.im@kmitl.ac.th The integrated biomass gasification and SOEC process (IBG-SOEC), which O2 from SOEC was used as gasifying agent while the separated H2 could be used for H2/CO adjustment or sell as a valuable byproduct, was studied to find the sustainable syngas production process.", "mime": "application/pdf"}, {"id": "cet-13195", "words": "3329", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13195", "date": null, "keywords": "food; packaging; performance; rfid; tag; tags; uhf; water", "summary": "The results of this work can be used for deeper investigations on the application of UHF RFID tags on food and beverage packages such as orange juice, apple juice, wine, and milk. While several studies highlight the importance of sensor-based smart packaging for food applications (Zuo et al., 2022), there are limited academic reports that evaluated the impact of food composition and tag placement on the performance of UHF RFID tags.", "mime": "application/pdf"}, {"id": "cet-13196", "words": "3404", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-13196", "date": null, "keywords": "laboratory; pilot; pilot scale; reactor; scale; test; units; volume", "summary": "LAB SCALE PILOT SCALE Porosity \u03b5 0.334 0.334 Particles average diameter (Dp) 2 2 Section Diameter (mm) 100 300 Table 3: Parameter of the laboratory and pilot scale oxidative reactors. The average graphite granules diameter in the laboratory and pilot scale units, estimated by using a particle distribution size average was 2 mm while, a substantial difference, in the gravel average diameter was used in laboratory and pilot scale resulted 2 and 10 mm respectively.", "mime": "application/pdf"}, {"id": "cet-13197", "words": "3926", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13197", "date": null, "keywords": "analysis; biomass; coal; energy; et al; oil; palm; podc; production", "summary": "Shrivastava P., Khongphakdi P., Palamanit A., Kumar A., Tekasakul P., 2021, Investigation of physicochemical properties of oil palm biomass for evaluating potential of biofuels production via pyrolysis processes, Biomass Conversion and Biorefinery, 11(5), 1987\u20132001. Malaysia is the second largest producer of palm oil and currently strengthening her palm oil production rate due to increase in the global demand (Ramli et al., 2016).", "mime": "application/pdf"}, {"id": "cet-1328", "words": "3307", "extension": ".pdf", "flesch": "56", "author": "Hoffmann, D.; Brugger, D.; Windisch, W.; Thurner, S.", "title": "Calibration Model for a Near Infrared Spectroscopy (NIRS) System to Control Feed Quality of Soy Cake Based on Feed Value Assessments In-Vitro ", "date": "2017", "keywords": "calibration; infrared; processing; samples; soybeans; spectra; tia; treatment", "summary": "Therefore, the aim of this study is to test a first calibration for processed soybeans that can be used for optimizing the heat treatment at decentral soybean processing plants. Also comparing the statistical values to other soybean calibrations or other calibrations in general, the established statistical parameters of this calibration show good results (Delwiche et al. 2006; Krapf et al. 2011; Zhang and Zhang 2015).", "mime": "application/pdf"}, {"id": "cet-1329", "words": "3352", "extension": ".pdf", "flesch": "54", "author": "Lopez-Maestresalas, A.; Perez, C.; Tierno, R.; Arazuri, S.; Ruiz De Galarreta, J.I.; Jaren, C.", "title": "Prediction of Main Potato Compounds by NIRS ", "date": "2017", "keywords": "content; model; nitrogen; pls; potato; prediction; samples; tsp; year", "summary": "Mehrubeoglu M., Cote G.L., 1997, Determination of total reducing sugars in potato samples using near- infrared spectroscopy, Cereal Foods World 42(5), 409-413. 4. Conclusions Quantitative analyses of different potato compounds have shown that good PLS regression models could be obtained for the prediction of nitrogen and TSP in a large collection of potato varieties.", "mime": "application/pdf"}, {"id": "cet-1330", "words": "3655", "extension": ".pdf", "flesch": "44", "author": "Manetto, G.; Cerruto, E.; Pascuzzi, S.; Santoro, F.", "title": "Improvements in Citrus Packing Lines to Reduce the Mechanical Damage to Fruit ", "date": "2017", "keywords": "acceleration; fruits; impacts; lines; machines; number; packing; system", "summary": "Van Zeebroeck M., Tijskens E., Dintwa E., Kafashan J., Loodts J., De Baerdemaeker J., Ramon H., 2006, The discrete element method (DEM) to simulate fruit impact damage during transport and handling: Case study of vibration damage during apple bulk transport, Postharvest Biology and Technology, 41, 92\u2013100. Garc\u00eda-Ramos F.J., Ortiz-Ca\u00f1avate J., Ruiz-Altisent M., 2003, Decelerator elements for ramp transfer points in fruit packing lines, Journal of Food Engineering, 59, 331\u2013337.", "mime": "application/pdf"}, {"id": "cet-1331", "words": "4862", "extension": ".pdf", "flesch": "61", "author": "Sortino, G.; Caviglia, V.; Liguori, G.; De Pasquale, C.; Gianguzzi, G.; Farina, V.", "title": "Quality Changes of Tropical and Subtropical Fresh-Cut Fruits Mix in Modified Atmosphere Packaging ", "date": "2017", "keywords": "ctr; cut; days; fruit; mango; map; orange; pineapple; quality; storage; values", "summary": "3. Results and Discussion Weight loss of fresh-cut MAP fruit increased gradually during 12 days of cold storage, especially in CTR fruit that showed higher values than MAP treatment (Table 1). Nevertheless, with a good initial product, the quality characteristics of fresh fruit may be prolonged.", "mime": "application/pdf"}, {"id": "cet-1332", "words": "4571", "extension": ".pdf", "flesch": "57", "author": "Sortino, G.; Allegra, A.; Passafiume, R.; Gianguzzi, G.; Gullo, G.; Gallotta, A.", "title": "Postharvest Application of Sulphur Dioxide Fumigation to Improve Quality and Storage Ability of \"Red Globe\" Grape Cultivar During Long Cold Storage ", "date": "2017", "keywords": "berries; days; grape; life; postharvest; quality; rachis; so2; storage; table; table grape; values", "summary": "Lichter A., Zutahy Y., Kaplunov T., Lurie S., 2008, Evaluation of table grape storage in boxes with sulfur dioxide releasing pads with either an internal plastic liner or external wrap, HortTechnology, 18, 206\u2013214. Piazzolla F., Pati S., Amodio M. L., Colelli G., 2016, Effect of harvest time on table grape quality during on vine storage, Journal of the Science of Food and Agriculture, 96(1), 131-139, DOI: 10.1002%2Fjsfa.7072.", "mime": "application/pdf"}, {"id": "cet-1333", "words": "3367", "extension": ".pdf", "flesch": "57", "author": "Sortino, G.; Gallotta, A.; Farina, V.; Allegra, A.", "title": "Shelf-Life and Quality of Fresh-Cut Peach Cv \u2018Ruby Rich\u2019 at Different Maturity Stage ", "date": "2017", "keywords": "cut; fruit; peach; quality; ruby; slices; storage", "summary": "Figure 1 Weight loss (%) of fruit slices of \u2018Ruby Rich\u00ae\u2019 peach harvested and processed at the following stages: commercially ripe (MG) and ripe on tree (RP) both stored for 3, 5, 7 and 12 d at 5 \u00b0C. Evolution of chemical and physical parameters for fruit slices of \u2018Ruby Rich\u00ae\u2019 peach harvested and processed at commercial ripeness (MG) and ripe on tree (RP), stored 3, 5, 7 and 12 d. at 5 \u00b0C.", "mime": "application/pdf"}, {"id": "cet-1334", "words": "3886", "extension": ".pdf", "flesch": "58", "author": "Farina, V.; Sortino, G.; Saletta, F.; Passafiume, R.; Giuffre, D.; Gianguzzi, G.; Inglese, P.; Liguori, G.", "title": "Effects of Rapid Refrigeration and Modified Atmosphere Packaging on Litchi (Litchi chinensis Sonn.) Fruit Quality Traits ", "date": "2017", "keywords": "days; fruit; life; litchi; rrf; shelf; storage", "summary": "After 12 days of cold storage treatment RRF fruits reaching the best values of L*a*b demonstrating that the RR treatment has helped the fruit to keep color characteristics. In conclusion, it can be said that the rapid cooling treatment technology allows to limit the loss of fruit color compared to not treated fruits with the advantage of presenting to the consumer a more attractive external appearance.", "mime": "application/pdf"}, {"id": "cet-1335", "words": "4763", "extension": ".pdf", "flesch": "52", "author": "Chironi, S.; Sortino, G.; Allegra, A.; Saletta, F.; Caviglia, V.; Ingrassia, M.", "title": "Consumer Assessment on Sensory Attributes of Fresh Table Grapes Cv 'Italia' and 'Red Globe' after Long Cold Storage Treatment ", "date": "2017", "keywords": "attributes; consumers; globe; grape; italia; red; so2; storage; table", "summary": "Lichter, A., Zutahy Y., Kaplunov T., Lurie S., 2008, Evaluation of table grape storage in boxes with sulfur dioxide releasing pads with either an internal plastic liner or external wrap, HortTechnology, 18, 206\u2013214. 1. Introduction Several studies have been carried out, so far, on table grapes; particularly, recent researches have focused on new methods for extending storage shelf life of cultivars bred in the major producing countries.", "mime": "application/pdf"}, {"id": "cet-1336", "words": "2807", "extension": ".pdf", "flesch": "56", "author": "Guerrini, L.; Masella, P.; Angeloni, G.; Cini, E.; Parenti, A.", "title": "A Device for the Monitoring of the Cap Buoyancy during the Red Grapes Fermentation ", "date": "2017", "keywords": "buoyancy; cap; fermentation; force; pomace; pomace cap", "summary": "It is supposable that the capability of pomace cap to retain carbon dioxide could be related to cap\u2019s integrity. Thus, understanding the changes in cap buoyancy could help to improve the pomace cap management.", "mime": "application/pdf"}, {"id": "cet-1337", "words": "3012", "extension": ".pdf", "flesch": "52", "author": "De Pasquale, C.; Catania, P.; Vallone, M.", "title": "Influence of the Pressing System on Pomegranate Juice Physical-Chemical Properties ", "date": "2017", "keywords": "activity; extraction; juice; pomegranate; properties; solution", "summary": "The aim of this study was to assess the influence of the pressing systems on pomegranate juice yield and health properties after the extraction. Many studies have been performed on pomegranate juice yield demonstrating its influence on the organoleptic and physicochemical properties of the juice (Fischer et al., 2013; Koppel et al., 2014, T\u00fcrky\u0131lmaz et al., 2013).", "mime": "application/pdf"}, {"id": "cet-1338", "words": "3940", "extension": ".pdf", "flesch": "47", "author": "Catania, P.; Febo, P.; Vallone, M.; De Pasquale, C.", "title": "Influence of O2 on Extra Virgin Olive Oil Fatty Acids Composition during Malaxation ", "date": "2017", "keywords": "acid; composition; evoo; fatty; machine; malaxation; oil; olive; oxygen; tests", "summary": "Youssef et al. (2013) studied the effect of malaxation time on fatty acid composition, announcing that the highest 8-Octadecenoic acid values were obtained in malaxation time of 15 min (67.57) and 30 min (67.89). The results have demonstrated a significant influence of oxygen on fatty acid composition through the implementation of a system which improves an electronic management and control of the oxygen in the headspace of the malaxer.", "mime": "application/pdf"}, {"id": "cet-1339", "words": "3660", "extension": ".pdf", "flesch": "57", "author": "Costa, C.; Taiti, C.; Zanetti, M.; Proto, A.R.; D'Andrea, S.; Greco, R.; Dematte, L.; Mancuso, S.; Cavalli, R.", "title": "Assessing VOC Emission by Wood Pellets Using the PTR- ToF-MS Technology ", "date": "2017", "keywords": "analysis; biomass; et al; pca; pellets; quality; samples; spruce; vocs; wood", "summary": "Conclusions The goal of this study was to detect the VOCs emitted by different wood pellets (commercial and not). To analyze the Volatile Organic Compounds (VOCs) emitted from wood pellets, 21 samples have been collected in triplicate.", "mime": "application/pdf"}, {"id": "cet-1340", "words": "3304", "extension": ".pdf", "flesch": "50", "author": "Caleca, V.; Antista, G.; Campisi, G.; Caruso, T.; Lo Verde, G.; Maltese, M.; Rizzo, R.; Planeta, D.", "title": "High Quality Extra Virgin Olive Oil from Olives Attacked by the Olive Fruit Fly, Bactrocera Oleae (Rossi) (Diptera Tephritidae): Which Is the Tolerable Limit? Data from Experimental \u2018Nocellara Del Belice\u2019 and \u2018Cerasuola\u2019 Olive Groves in Sicily ", "date": "2017", "keywords": "exit; harvest; holes; infestation; oil; oleae; olive; quality", "summary": "453 Figure 2: Correlation between the percentage of B. oleae exit holes at harvest and free acidity of olive oil; the regression analysis is highly significant (see Table 1). EVOO upper limit 454 Figure 4: Correlation between the percentage of B. oleae exit holes at harvest and total phenolic content of olive oil; the regression analysis resulted not significant (see Table 1).", "mime": "application/pdf"}, {"id": "cet-1341", "words": "3049", "extension": ".pdf", "flesch": "54", "author": "Marquez Cardozo, C.J.; Arango, J.C.; Osorio, J.A.", "title": "Posharvest Characteristics and Preservation of Pulp of Curuba (Passiflora mollissima) ", "date": "2017", "keywords": "characteristics; chemical; colombia; control; curuba; fruit; pulp; treatments", "summary": "Physical-chemical characteristics for fresh fruit pulp at day six of post-harvest. Pulp conservation treatments.", "mime": "application/pdf"}, {"id": "cet-1342", "words": "3098", "extension": ".pdf", "flesch": "52", "author": "Rossel-Kipping, E.; Ortiz-Laurel, H.; Gonzalez-Medina, E.; Amante-Orozco, A.", "title": "Conceptual Design and Functional Modelling of a Portable Thermophilic Biodigester for a High Dry Matter Feedstock ", "date": "2017", "keywords": "biodigester; biogas; energy; manure; matter; process; production; rural; salinas; substrate; water", "summary": "R\u00f6ssel et al. (2013) states that important strategies have to be considered in order to secure safe production of food and fibers to feed the population, moving along a constant interaction between scientific and technical progress, while energy production is in great need and any development has to take into account to highest efficiency and low production costs. By doing that, there will be a new clean source for energy generation for Mexican highlands and at the same time hands-on a technology that allows to care for the environment.", "mime": "application/pdf"}, {"id": "cet-1343", "words": "3567", "extension": ".pdf", "flesch": "42", "author": "Colantoni, A.; Zambon, I.; Cecchini, M.; Marucci, A.; Piacentini, L.; Feltrini, S.; Monarca, D.", "title": "Greenhouses Plants as a Landmark for Research and Innovation: the Combination of Agricultural and Energy Purposes in Italy ", "date": "2017", "keywords": "energy; et al; greenhouses; italy; land; plants; sealing; soil", "summary": "Nothing has been done to evaluate PV greenhouse plants as a part of the agricultural landscape with a potential energy, due to restricted database and very local research studies (e.g. Sgroi, et al., 2014; Tudisca et al., 2013). With PV trend, national and regional administrations have planned several limitations useful to prevent speculative episodes regarding PV greenhouses (GSE, 2014).", "mime": "application/pdf"}, {"id": "cet-1344", "words": "3064", "extension": ".pdf", "flesch": "48", "author": "Kuribayashi, M.; Tojo, S.; Chosa, T.; Murayama, T.; Sasaki, K.; Kotaka, H.", "title": "Developing a New Technology for the Two Phase Methane Fermentation Sludge Recirculation Process ", "date": "2017", "keywords": "0.5mpa; acid; fermentation; hcw; hydrogen; sludge; treatment", "summary": "Hydrogen fermentation sludge contains much VFAs and secondary treatment such as methane fermentation is usually necessary. 476 2.5 Hydrogen fermentation sludge analysis The pH of hydrogen fermentation sludge was measured by a pH meter (TOADKK, HM-21P).", "mime": "application/pdf"}, {"id": "cet-1345", "words": "2329", "extension": ".pdf", "flesch": "42", "author": "Bacenetti, J.; Restuccia, A.; Schillaci, G.; Fiala, M.; Failla, S.", "title": "Life Cycle Assessment of Flax and Camelina for Biodiesel Production in Sicily (Southern Italy) ", "date": "2017", "keywords": "biodiesel; camelina; flax; impact; pressing; production; seed", "summary": "Table 3: Environmental impact assessment for 1 ton of biodiesel Impact category Unit Flax Camelina Climate change kg CO2 eq 4484 5702 Ozone depletion mg CFC-11 eq 0.394 0.383 Terrestrial acidification kg SO2 eq 84.04 109.04 Freshwater eutrophication g P eq 1.244 1.597 Marine eutrophication kg N eq 119.42 155.65 Particulate matter formation kg PM10 eq 15.18 19.60 Metal depletion kg Fe eq 268.18 345.19 Fossil depletion kg oil eq 821.43 994.12 Figure 2: Relative comparison between the biodiesel produced from: flax (green) and Respect to camelina, seed flax production is responsible for higher environmental impact for OD (+4%, due to higher amount of seed used at sowing).", "mime": "application/pdf"}, {"id": "cet-1346", "words": "2985", "extension": ".pdf", "flesch": "49", "author": "Sperandio, G.; Amoriello, T.; Carbone, K.; Fedrizzi, M.; Monteleone, A.; Tarangioli, S.; Pagano, M.", "title": "Increasing the Value of Spent Grain from Craft Microbreweries for Energy Purposes ", "date": "2017", "keywords": "bsg; content; costs; grain; pellets; plant; production; y-1", "summary": "Figure 1: Percentage breakdown of annual operating costs of the small plant of pellets production in relation to 1,600 h y-1 of usage 489 Figure 1 shows the relative contribution of the single items on the managing costs of the pelletizing plant, whereas Table 2 shows the main elements and the costs calculated for three different levels of plant capacity utilisation. The paper also reports the technical and economic analysis of the design solution feasibility linked to the production of BSG pellets for energy use.", "mime": "application/pdf"}, {"id": "cet-1347", "words": "3350", "extension": ".pdf", "flesch": "41", "author": "Castaneda, I.; Bojaca, V.; Ramos, G.; Santis, A.; Acevedo, P.", "title": "Study of the Eco-efficiency of Biodiesel Production from the Fruit of the Jatropha Curcas Plant ", "date": "2017", "keywords": "biodiesel; curcas; cycle; impact; jatropha; life; oil; production; stage", "summary": "Conclusions The crop is the most significant life cycle stage in Jatropha Curcas biodiesel life cycle, representing almost the total of the potential environmental impacts. Since in Colombia there are not Jatropha Curcas biodiesel production plants on an industrial scale, the inventory analysis for this stage was carried out by constructing the mass and energy balances of the process in a process simulator: UniSim\u00ae.", "mime": "application/pdf"}, {"id": "cet-13474", "words": "2905", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13474", "date": null, "keywords": "adsorption; albumin; bilirubin; particles; silica", "summary": "Figure 1: Albumin adsorption isotherm at 25\u00b0C and pH 7.4 using silica particles. The adsorption performances of solid adsorbents toward bilirubin removal were firstly investigated in clinical articles which lacked of a quantitative analysis that could induce to rational design criteria of the adsorption units.", "mime": "application/pdf"}, {"id": "cet-13475", "words": "4116", "extension": ".pdf", "flesch": "64", "author": null, "title": "cet-13475", "date": null, "keywords": "ash; coal; et al; fly; materials; removal; synthesis; waste; zeolite", "summary": "Rising attention was given for zeolite synthesis from waste materials in order to abate the high costs related to such process. Moreover, the African scenario was analyzed and Coal Fly Ash , with an estimated production of 12 Mtons/y by 2030, was selected as the best alternative for zeolite synthesis in this country.", "mime": "application/pdf"}, {"id": "cet-13476", "words": "2949", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13476", "date": null, "keywords": "attractor; flow; particle; swarming", "summary": "They are: the rate of entrainment of dispersion particles and attractive region by a continuum media flow in the apparatus; random drift of particles, which simulates the influence of Brownian motion and turbulent pulsations; diffusion limited kinetics of particle aggregation with the formation of clusters with account of the influence of moving attractor. In the submitted work the new approach based on the method of random walk on stochastic lattices to computer simulation of attractive swarming, accompanied by particle aggregation, for the case of a moving region of attraction has been applied.", "mime": "application/pdf"}, {"id": "cet-13477", "words": "3224", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13477", "date": null, "keywords": "aggregation; coagulation; energy; interaction; model; order; particles; stability; surface", "summary": "The submitted model can presumably be used both in creating stable dispersions with particle sizes of about 40\u201350 nm in medicine and pharmacology and in developing methods for air purification from fine solid particles (PM2.5) with sizes of about 2.5 um. During sedimentation (settlement under the action of gravity), each particle in such suspensions settles separately, without forming aggregates with other particles.", "mime": "application/pdf"}, {"id": "cet-13478", "words": "2971", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13478", "date": null, "keywords": "days; germination; maximum; mow; soil; treatment; value", "summary": "The lack of strategies for soil recovery, such as the indiscriminate use of fertilizers (Hengl et al., 2017), anthropogenic activities (Guo et al., 2019), poor management of domestic waste have caused an environmental problem (Nascimento et al., 2021). Some studies support the use of municipal organic waste for soil recovery through dosing (Mu\u00f1oz et al., 2015).", "mime": "application/pdf"}, {"id": "cet-13479", "words": "3674", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13479", "date": null, "keywords": "coliforms; control; group; lechleri; resin; treatment; ufc/100; ufc/100 ml; water", "summary": "Public Health Journal, 18(5), 738-745 Salamanca E, 2014, Water treatment for human consumption. It is important to mention that plants and their derivatives are an efficient and effective alternative for the elimination of bacteria present in water samples, being an ecological proposal for the care of natural resources and human health.", "mime": "application/pdf"}, {"id": "cet-1348", "words": "2937", "extension": ".pdf", "flesch": "41", "author": "Perone, C.; Catalano, F.; Giametta, F.; Tamborrino, A.; Bianchi, B.; Ayr, U.", "title": "Study and Analysis of a Cogeneration System with Microturbines in a Food Farming of Dry Pasta ", "date": "2017", "keywords": "chp; cogeneration; energy; heat; microturbines; plant; power", "summary": "Furthermore, the amount of heat energy required at temperatures lower than 100 \u00b0C is equal to about 10 % of the total heat load. On the contrary, this choice provides for the possibility of a cycle combined with an post-burner: in fact it is not appropriate to size the cogeneration plant to meet the whole needed heat power because this would result in to high surplus of electrical energy produced such as not to justify the economic convenience.", "mime": "application/pdf"}, {"id": "cet-13480", "words": "3386", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13480", "date": null, "keywords": "aacc; flour; food; gluten; nir; quality; results; wheat; wheat flour", "summary": "It was possible to build regression trees with the identification of classifiers by nodes, branches and leaves to predict wheat flour quality more accuracy than linear regression. In this context, the objective of this study was to use machine learning methods to estimate the reliability of NIR spectra compared to traditional methods for wheat flour quality control.", "mime": "application/pdf"}, {"id": "cet-13481", "words": "3833", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13481", "date": null, "keywords": "brick; material; pet; rubber; type; unit; waste", "summary": "It is important to highlight that the LCP36% has lower quality characteristics within the final classification of masonry units, also the LCP12% unit has the same final classification as the LCP24% unit, however, a lower percentage of waste can be recycled Therefore, the LCP24% unit would be the most optimal because it is the best alternative to recycle rubber and PET waste that is harmful to the environment, within the objectives of sustainable development. unit as type V due to its millimeter variations, the warpage had values of 2.13 and 2.08, placing it in the classification of type V brick, the absorption indicates that it is type V with values well below the norm (12%), in terms of compressive strength LCP12% units are classified as type V, LCP24% type V and LCP36% type III; all the specimens made comply with the physical and mechanical characteristics required in the masonry standard E 0.70.", "mime": "application/pdf"}, {"id": "cet-13482", "words": "2976", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13482", "date": null, "keywords": "bricks; construction; masonry; pet; polyethylene; shavings; terephthalate; waste", "summary": "Table 4: Warpage of bricks Brick prototype Warp Concavity (mm) Class (E.070) L-1 3 IV L-2 3 IV L-3 3 IV L-4 2 V L-5 3 IV The PET waste and iron waste bricks did meet the main characteristics that classify them as construction units of type V and IV for construction activities in masonry, in the construction of homes as indicated by Wahane et al., 2022), according to It can be seen in Fig. Figure 3: Prototypes of bricks 2.3 Characterization of brick prototypes The brick prototypes were characterized around their sizing following the test method of the reference standard of NTP 399.604, 2002 revised in 2015; the maximum load and compressive strength according to the test method of NTP 399.604 (INDECOPI, 2002) using the PROETI uniaxial testing machine; and the warp concavity according to NTP 399.613:2017 (INDECOPI, 2005) and the E.070.2006 standard (MVCS, 2006).", "mime": "application/pdf"}, {"id": "cet-13483", "words": "3289", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13483", "date": null, "keywords": "coatings; electroless; icing; layer; plating; pure; sample; surface", "summary": "Firstly, as a coating reference, a single layer of pure Ni coating was deposited (thickness around 10 \u00b5m); then, Ni+FEP single layer was deposited with the help of a surfactant added to the nanoparticles solution to avoid the agglomeration of the filler. Study on surface wettability of nickel coating prepared by electrodeposition combined with chemical etching.", "mime": "application/pdf"}, {"id": "cet-13484", "words": "2922", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13484", "date": null, "keywords": "exposure; factory; health; nanoparticles; risk; time", "summary": "Sen\u010d\u00edk J., Nechv\u00e1tal M., Klouda K., \u0160kr\u00e9ta K., B\u00f6swartov\u00e1 J., Fri\u0161hansov\u00e1 L., 2016, Certified methodology for providing personal protective equipment in an environment with a risk of nanoparticles, Occupational Safety Research Institute, Prague, CZ. (in Czech) Shah M.A., Pirzada B.M., Price G., Shibiru A.L., Qurashi A., 2022, Applications of nanotechnology in smart textile industry: A critical review, Journal of Advanced Research, 38, 55-75. 222 82nechvatal.pdf Emission of Nanoparticles in the Nanotextile Industry The measurement of nanoparticle emissions in the indoor environment in the nanotextile industry was carried out at several workplaces in the Czech Republic (Fig. 1, 2, 3).", "mime": "application/pdf"}, {"id": "cet-13485", "words": "2824", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13485", "date": null, "keywords": "annealing; coppola; gdc; oxygen; sample; temperature; xas", "summary": "Since the aforementioned GDC layer fabrication process (Coppola et al. 2020; Coppola et al. 2018b) has proved feasible also in the case of industrial scale SOFC (Coppola et al. 2021, Coppola et al.2023), it is interesting and noteworthy to achieve a deeper understanding of microscopic differences among sputtered GDC thin film barrier layer as a function of post-growth annealing treatment in view of further optimization of industrial scale SOFCs. d National Research Council CNR-IOM, TASC National Laboratory, I-34149 Trieste, Italy e SolydEra S.p.A., Viale Trento 117, 38017 Mezzolombardo (TN), Italy f National Research Council CNR-SPIN, Area della Ricerca di Tor Vergata, 00133 Rome, Italy ncoppola@unisa.it In previous works, we reported that Solid Oxide Fuel Cells (SOFCs), having a room-temperature sputtered and then annealed GDC thin film as the cathode/electrolyte barrier layer, had showed a huge increase of the output current (up to +78%) and a decrease of the ohmic resistance (up to -42%) as compared to fully screen-printed industrial SOFCs.", "mime": "application/pdf"}, {"id": "cet-13486", "words": "3492", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13486", "date": null, "keywords": "certification; communication; e&t&c; engagement; impact; odour; plant; transparency", "summary": "This Certification is designed to assess the performance of industrial plants concerning their relationship with communities nearby, making it the first Certification of its kind. Some of the common certifications for industrial plants are: \u2022 ISO 9001:", "mime": "application/pdf"}, {"id": "cet-13487", "words": "3551", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13487", "date": null, "keywords": "cfd; flow; liquid; patterns; plug; simulations", "summary": "Similarly, for systems like water-IL were investigated by (Yagodnitsyna et al., 2017) and (Yagodnitsyna et al., 2020) where flow patterns like plug flow, slug flow, parallel flow, rivulet and throat annular flow were found. This study shows the capability of numerical simulations to predict different flow patterns and depicts the potential for carrying out simulations for dissolution of plastics in microchannels in future 1.", "mime": "application/pdf"}, {"id": "cet-13488", "words": "4036", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13488", "date": null, "keywords": "carbon; cdw; glucose; glycerol; medium; oil; pha; production; putida; strains; wfo", "summary": "In light of a strong desire for improvement of PHA biosynthesis, previous studies have mainly focused on nutrient limitation (e.g. N, P, S or Fe) (Chen and Jiang, 2018), overexpression of PHA synthesis pathways, shutting down competitiveness pathways (Zhuang et al., 2014), enhancing the NADH or NADPH supply (Ling et al., 2018), changing cell growth patterns for rapid proliferation, morphological engineering to increase the cell size (Jiang et al.,2012), the optimization of promoter or the ribosome binding site (Li et al., 2016) or engineering alternative extremophilic bacteria chassis (Tan et al., 2014). Although there are still drawbacks, our results basically proclaim that the amount of gained PHA by using WFO is higher than glycerol which is the material of choice for PHA production.", "mime": "application/pdf"}, {"id": "cet-13489", "words": "3632", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13489", "date": null, "keywords": "acceptability; beta; eggs; liquid; quail; quail eggs; quality; shelf; storage; vulgaris", "summary": "Likewise, the storage conditions and evaluation times for canned quail eggs in Beta vulgaris sauce using temperature-controlled (40, 45 y 50 \u00b0C) in six times as recommended by Acosta et al. (2014). 248 3. Results and Discussion 3.1 Sensory acceptability analysis of canned quail eggs in Beta vulgaris sauce Results of the sensory acceptability analysis of the five formulations of canned quail eggs in beterraga sauce (Beta vulgaris) are shown in Table 2, which presents significant differences among treatments, with the treatment T4 (75% de Beta vulgaris) statistically superior to the other treatments, reaching a mean acceptability of 8.18 points compared to T2 (25% Beta vulgaris) which reported the lowest average with 3.71 points based on the 9-point hedonic scale.", "mime": "application/pdf"}, {"id": "cet-1349", "words": "3774", "extension": ".pdf", "flesch": "47", "author": "Giudicianni, P.; Pindozzi, S.; Grottola, C.M.; Stanzione, F.; Faugno, S.; Fagnano, M.; Fiorentino, N.; Ragucci, R.", "title": "Effect of Feedstock and Temperature on the Distribution of Heavy Metals in Char from Slow Steam Pyrolysis of Contaminated Biomasses ", "date": "2017", "keywords": "biomass; branches; char; leaves; metals; pyrolysis; temperature", "summary": "Ca Mg Fe Cd Cu Pb Zn mg/kg dry basis Branches 206 248 468 4477 9407 836 132 2 8 60 50 Leaves 573 1854 1088 3596 38015 2325 477 10 63 423 118 3.2 Pyrolysis test Figure 1, panels a and b, shows the products yields obtained from pyrolysis tests of branches and leaves, respectively, at three different temperatures 653, 753 and 873 K. For both the samples, the char yield decreases with pyrolysis temperature due to the increased loss of condensable volatiles (indicated in the figure as \u201cliquid\u201d) and permanent gases (indicated in the figure as \u201cgas\u201d). The results showed that, in presence of Cd, if pyrolysis temperature is higher than 653 K, it is not possible to obtain a free heavy metals vapor phase.", "mime": "application/pdf"}, {"id": "cet-13490", "words": "2879", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13490", "date": null, "keywords": "air; gas; gasification; plastic; pw-30; test; waste", "summary": "The chemical characterization of plastic waste, producer gas, EF, and tar streams allowed to perform the mass balance applied to the carbon element, i.e., the carbon layer in Figure 1B and the energy balance, i.e., the energy layer in Figure 1C. Figure 3: Material and energy flow analyses applied to the test PW-30-EA. The process performance was assessed based on different parameters, such as producer gas heating value, yield of undesired by-products (tar and elutriated fines), carbon conversion efficiency, and cold gas efficiency.", "mime": "application/pdf"}, {"id": "cet-13491", "words": "4171", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13491", "date": null, "keywords": "food; hollandaise; isolate; lpi; oil; ppi; properties; protein; sauce; spi", "summary": "Material & Methods Commercial protein isolates such as: soy protein isolate (SPI; VEGACON 90 KK; EUROSOY) FH Diedrichs & Ludwig Post GmbH, pea protein isolate (PPI; Pisane M9, Cosucra) and lupin protein isolate (LPI, Lupin protein isolate spray dried Pro Lupin) Concistency index and flow behaviour of sauces with PPI (pea protein isolate) and LPI (lupin protein isolate); a = 65 \u00b0C, b =100 \u00b0C 5 Gorissen S. H. M., Crombag J. J. R., Joan M. G. S., Waterval W. A. H., Bierau J., Verdijk L. B.,van Loon, L. J. C., 2018, Protein content and amino acid composition of commercially available plant-based protein isolates, Amino acids, 12, 1685\u20131695 Gu X., Campbell L. J.,Euston S. R., 2009, Effects of different oils on the properties of soy protein isolate emulsions and gels, Food Research International, 8, 925\u2013932 Heng L., van Koningsveld G.A., Gruppen H., van Boekel M.A.J.S., Vincken J.-P., Roozen J.P.,Voragen A.G.J., 2004, Protein\u2013flavour interactions in relation to development of novel protein foods, Trends in Food Science & Technology, 3-4, 217\u2013224 Hopia A., Sillanp\u00e4\u00e4 M.,Tuomisto M., 2013, Hollandaise sauce and the chemistry behind old and new preparation techniques, LUMAT, 2, 189\u2013195 Hosseini-Parvar S. H., Matia-Merino L., Goh K.K.T., Razavi S.M.A.,Mortazavi S. A., 2010, Steady shear flow behavior of gum extracted from Ocimum basilicum L. seed: Effect of concentration and temperature, Journal of Food Engineering, 3, 236\u2013243 Ibanoglu E.,Er\u00e7elebi E. A., 2007, Thermal denaturation and functional properties of egg proteins in the presence of hydrocolloid gums, Food chemistry, 2, 626\u2013633 Kinsella J. E., 1979, Functional properties of soy proteins, Journal of japan oil chemists' society, 56, 242\u2013257 Kiosseoglou V., 2003, Egg yolk protein gels and emulsions, Current Opinion in Colloid & Interface Science, 4- 5, 365\u2013370 Koocheki A., Ghandi, A. Razavi, S. M. A., Mortazavi S. A.,Vasiljevic T., 2009, The rheological properties of ketchup as a function of different hydrocolloids and temperature, International Journal of Food Science & Technology, 3, 596\u2013602 Lam A. C. Y., Can Karaca A., Tyler R. T.,Nickerson M. T., 2018, Pea protein isolates: Structure, extraction, and functionality, Food Reviews International, 2, 126\u2013147 Lo B., Kasapis S.,Farahnaky A., 2021, Lupin protein: Isolation and techno-functional properties, a review, Food Hydrocolloids, 3, 106318 Muranyi I. S., Otto C., Pickardt C., Osen R., Koehler P.,Schweiggert-Weisz U., 2016, Influence of the Isolation Method on the Technofunctional Properties of Protein Isolates from Lupinus angustifolius L, Journal of food science, 11, C2656-C2663 Okonkwo V. C., Mba O. I., Kwofie E. M.,Ngadi M. O., 2021, Rheological Properties of Meat Sauces as Influenced by Temperature, Food and Bioprocess Technology, 11, 2146\u20132160 Pearce K. N.,Kinsella J. E., 1978, Emulsifying properties of proteins: evaluation of a turbidimetric technique, Journal of agricultural and food chemistry, 26, 716\u2013722 Rodr\u00edguez-Ambriz S. L., Mart\u00ednez-Ayala A. L., Mill\u00e1n F.,D\u00e1vila-Ort\u00edz G., 2005, Composition and functional properties of Lupinus campestris protein isolates, Plant Foods for Human Nutrition, 3, 99\u2013107 Sagdic O., Toker O. S., P. B., A. M.,Y. M. T., 2015, Bioactive and rheological properties of rose hip marmalade, Journal of food science and technology, 10, 6465\u20136474 Sanjeewa T. W. G., Wanasundara J. P.D., Pietrasik Z.,Shand P. J., 2010, Characterization of chickpea (Cicer arietinum L.) flours and application in low-fat pork bologna as a model system, Food Research International, 2, 617\u2013626 Sha L.,Xiong Y. L., 2020, Plant protein-based alternatives of reconstructed meat: Science, technology, and challenges, Trends in Food Science & Technology, suppl_3, 51\u201361 Shrestha S., Leonie van 't Hag, Haritos V. S.,Dhital S., 2021, Lupin proteins:", "mime": "application/pdf"}, {"id": "cet-13492", "words": "4187", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13492", "date": null, "keywords": "cimini; footprint; impact; life; packaging; pasta; use; wheat", "summary": "Their different environmental impact mainly derives from the refrigerated transport of fresh pasta, its moisture content (24% w/w) being quite the double of that of dry pasta (12.5% w/w), and chilled preservation till final consumption. Even if the use of new smart energy-saving home appliances might mitigate the overall environmental impact of both products, the consumption of dry pasta instead of fresh pasta is more eco-sustainable, mainly because it is shelf-stable and needs no refrigerated supply chain.", "mime": "application/pdf"}, {"id": "cet-13493", "words": "3982", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13493", "date": null, "keywords": "acidity; behavior; moisture; powder; pulp; pulp powder; tamarind; tamarind pulp", "summary": "Thus, to minimize the effects related to the high acid content as a limiting factor for good drying and for sensory acceptance, it is necessary to investigate the effects of acidity reduction in the lyophilization process of tamarind pulp, and the hygroscopic behavior of tamarind pulp powder. The addition of an anticaking agent after lyophilization was also evaluated because of the satisfactory results found in reducing tamarind pulp powder caking in a study by Passos (2017), using calcium carbonate as an anticaking agent in the tamarind powder obtained by lyophilization.", "mime": "application/pdf"}, {"id": "cet-13494", "words": "3768", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13494", "date": null, "keywords": "cream; fat; ice; ice cream; lipid; melting; oil; peanut; sample", "summary": "2.5.2 Meltdown test The meltdown test was performed in duplicate on ice cream samples stored at \u201318 \u00b0C for 2 weeks. The obtained structured lipid was then used as a fat source in a mixture for the production of ice cream.", "mime": "application/pdf"}, {"id": "cet-13495", "words": "3537", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13495", "date": null, "keywords": "analogue; babassu; cashew; cashew fiber; cheese; coconut; fiber; hamburger; plant; products; protein; spirulina", "summary": "Cashew fiber is a potentially valuable biomass that, when used as a new food matrix in plant-based product formulations, meets part of the dietary needs of groups of people who seek to consume fiber-rich products, but also those who want to reduce or avoid meat consumption, such as vegetarians and vegans, in addition to the general public who choose this line of products. The use of cashew fiber in the production of animal protein-free foods has been a great asset in providing a surprising texture very close to that of animal meat, in addition to bringing nutritional benefits.", "mime": "application/pdf"}, {"id": "cet-13496", "words": "3766", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13496", "date": null, "keywords": "content; hazelnut; oil; paste; proteins; samples; separation; sunflower; tocopherols", "summary": "Soy proteins were selected as 31 consolidated plant proteins in the food industry, while sunflower proteins were selected because emerging proteins extracted from the residual cake of sunflower seed oil extraction and because in preliminary tests (data not shown) they revealed that these proteins show a higher oil holding capacity even with lower protein content. \ud835\udc58\ud835\udc47 = \ud835\udc34 \u2217 exp(\u2212 \ud835\udc38\ud835\udc4e \ud835\udc45\ud835\udc47 ) (1) Samples of stabilized paste, non-stabilized paste, non-stabilized paste with soy proteins or sunflower proteins were distributed into plastic jars (60 g of paste each) and into Falcon tubes (6 g of paste each).", "mime": "application/pdf"}, {"id": "cet-13497", "words": "3716", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13497", "date": null, "keywords": "content; food; legume; plant; process; processing; protein; starch; water", "summary": "So, legume proteins may provide a wide range of nutrient sources for a variety of proteolytic microorganisms, they can be mixed or not with milk and subjected to fermentation with various microbial consortia to affect the content of aroma compounds, including those responsible for \u201cbeany\u201d off-flavours, with consequences on consumer perception (Ben- Harb et al., 2021). Introduction There is a need to decrease the part of animal protein in our diet, which means to increase our consumption in plant proteins, i.e. in cereals and legumes.", "mime": "application/pdf"}, {"id": "cet-13498", "words": "4179", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13498", "date": null, "keywords": "colour; liking; mpc; ppi; properties; protein; soup; techno; tomato; tomato soup", "summary": "ISBN 979-12-81206-01-4; ISSN 2283-9216 Development of High Protein Tomato Soup Using Milk Protein Concentrate and Pea Protein Isolate Mahrokh Jamshidvand, Niall Gallen, Maria Dermiki* Department of Health and Nutritional Sciences, Atlantic Technological University, Sligo, Ireland Maria.dermiki@atu.ie This study aimed to explore the development of a high protein tomato soup to address the nutritional needs of older adults who require higher levels of protein compared to the general population. A significant increase in pH, apparent viscosity, and L*and b* values and a decrease in a*value for colour were observed with the addition of protein in the tomato soup.", "mime": "application/pdf"}, {"id": "cet-13499", "words": "4042", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13499", "date": null, "keywords": "amylose; chenopodium; content; grains; kanihua; properties; quinoa; starch; starches", "summary": "1426 \u00b1 42b 943 \u00b1 21a 905 \u00b1 26a 675 \u00b1 43c G e la ti n i- z a ti o n Tmaximum (\u00b0C) 63.1 \u00b1 0.2a 63.0 \u00b1 0.2a 58.7 \u00b1 0.2b 57.2 \u00b1 0.4b 59.3 \u00b1 0.7b Tonset (\u00b0C) 54.6 \u00b1 0.5a 55.7 \u00b1 0.3a 49.4 \u00b1 0.5b 48.8 \u00b1 0.0b 49.98 \u00b1 0.7b Range Temp (\u00b0C) 25.0 \u00b1 1.2a 22.0 \u00b1 0.6a 27.9 \u00b1 0.6a 27.2 \u00b1 1.9a 25.3 \u00b1 0.3a \u0394H (Jg-1) 11.7 \u00b1 0.3a 11.6 \u00b1 0.5a 10.8 \u00b1 0.5a 12.6 \u00b1 0.6a 11.6 \u00b1 0.0a R e tr o g ra - d a ti o n Tmaximum (\u00b0C) 45.2 \u00b1 0.5a 46.0 \u00b1 0.7a 46.2 \u00b1 0.0a 45.6 \u00b1 0.6a 45.0 \u00b1 0.2a Tonset (\u00b0C) 34.0 \u00b1 0.0a 35.8 \u00b1 3.1a 35.8 \u00b1 0.1a 34.8 \u00b1 0.6a 35.1 \u00b1 0.2a Range Temp. The crystallinity of the samples was similar, mean estimated at 31.8% \u00b1 4.5.", "mime": "application/pdf"}, {"id": "cet-1350", "words": "3185", "extension": ".pdf", "flesch": "56", "author": "Anifantis, A.S.", "title": "Performance Assessment of Photovoltaic, Ground Source Heat Pump and Hydrogen Heat Generator in a Stand-Alone Systems for Greenhouse Heating ", "date": "2017", "keywords": "cell; efficiency; energy; greenhouse; heat; heating; hydrogen; power; pump; system", "summary": "Furthermore, the first system increasing the greenhouse temperature by 6\u00b0C to 10\u00b0C compared with the ambient conditions, while the second system by 3\u00b0C to 7\u00b0C. Keywords: Stand alone renewable energy system; Ground source heat pump; Hydrogen burner; Greenhouses heating. 0 100 200 300 400 500 600 700 0 0,2 0,4 0,6 0,8 1 1,2 0 2 4 6 8 10 12 14 16 18 20 22 0 2 4 6 8 S o la r ra d ia ti o n ( W /m 2 ) P V E ff ic ie n cy Time in hours \u03b7PV measured \u03b7el,H2 measured IT measured 514 Figure 4: Fuel cell electric power, ground source heat pump and hydrogen burner heating powers.", "mime": "application/pdf"}, {"id": "cet-13500", "words": "3258", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13500", "date": null, "keywords": "equilibrium; extraction; hazelnut; polyphenols; tests; water", "summary": "Nomenclature \ud835\udc36 \u2013 concentration of polyphenols in water, g/l \ud835\udc36\ud835\udc52 \u2013 equilibrium concentration of polyphenols in water, g/l \ud835\udc36\ud835\udc56 \u2013 concentration of polyphenols in water at the end of the \ud835\udc56-th cycle, g/l \ud835\udc58 \u2013 linear partition coefficient, l/g \ud835\udc40 \u2013 mass of solid matrix, g \ud835\udc5e\ud835\udc52 \u2013 equilibrium concentration polyphenols in solid mass of hazelnut skins, g/g \ud835\udc5e\ud835\udc61\ud835\udc5c\ud835\udc61 \u2013 total amount of extractable polyphenols in solid mass of hazelnut skins, g/g \ud835\udc49 \u2013 volume of solvent, l \ud835\udefc \u2013 solid-liquid ratio , g/l References Capparucci, C., Gironi, F., & Piemonte, V. (2011). 3. Results 3.1 Quantification of total extractable polyphenols from hazelnut skins and of extraction time The total amount \ud835\udc5e\ud835\udc61\ud835\udc5c\ud835\udc61 of extractable polyphenols per mass of solid matrix was calculated through a mass balance extended to all the extraction cycles of each test as follows: \ud835\udc5e\ud835\udc61\ud835\udc5c\ud835\udc61 = \ud835\udc49\ud835\udc3f \ud835\udc40\ud835\udc46 \u2211 \ud835\udc36\ud835\udc56 \ud835\udc41 \ud835\udc56=1 = 1 \ud835\udefc \u2211 \ud835\udc36\ud835\udc56 \ud835\udc41 \ud835\udc56=1 (1) where \ud835\udc49\ud835\udc3f and \ud835\udc40\ud835\udc46 are the liquid volume and the solid mass loaded at the beginning of the test, respectively, and \ud835\udc36\ud835\udc56 is the concentration of polyphenols in the aqueous solution at the end of the \ud835\udc56-th cycle of the test; the ratio between \ud835\udc49\ud835\udc3f and \ud835\udc40\ud835\udc46 coincides with the reciprocal of the solid liquid ratio \ud835\udefc. The calculation of \ud835\udc5e\ud835\udc61\ud835\udc5c\ud835\udc61 was repeated for all tests, each characterized by a different number \ud835\udc41 of cycles.", "mime": "application/pdf"}, {"id": "cet-13501", "words": "3728", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13501", "date": null, "keywords": "data; fruit; irrigation; kiwifruit; plant; quality; soil; spectrum; storage; water", "summary": "For the fruit, the soluble solids content was higher in deficit irrigation than in 100% 65 irrigation, enhancing the desirable quality of the fruit that is appreciated by consumers and is further accentuated when irrigation water is reduced. This suggests that by reducing irrigation water, companies can achieve economic savings and reduce water waste while still obtaining high-quality final products.", "mime": "application/pdf"}, {"id": "cet-13502", "words": "4224", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13502", "date": null, "keywords": "agri; chain; food; information; model; requirements; supply; system", "summary": "ISBN 979-12-81206-01-4; ISSN 2283-9216 The Systems Engineering Approach as a Modelling Paradigm of the Agri-Food Supply-Chain Maria Teresa Gaudio*, Sudip Chakraborty, Stefano Curcio University of Calabria, Laboratory of Transport Phenomena and Biotechnology, Department of DIMES, Cubo-42a, 87036 Rende (CS), Italy] mariateresa.gaudio@unical.it The agri-food supply-chain represents a complex System-of-System (SoS), because it crosses different other sectors and involves many different actors. It consists of different sectors that interact between them and it could be seen as a SoS, whose system elements are themselves systems; typically, SoS entail large-scale interdisciplinary problems with multiple, heterogeneous, distributed systems.", "mime": "application/pdf"}, {"id": "cet-13503", "words": "3104", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13503", "date": null, "keywords": "activity; biomass; cheese; cream; denaturation; europaea; products", "summary": "Salicornia herbacea L. extracts have been described to exhibit anti-inflammatory activities. Therefore, these initial results indicate that the formulation of cream cheese products with the addition of S. europaea biomass can be achieved.", "mime": "application/pdf"}, {"id": "cet-13504", "words": "3503", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13504", "date": null, "keywords": "almonds; compounds; heating; microwave; rpm; temperature; treatment; uniformity", "summary": "Microwave treatment is most effective on liquid water and is less effective on fats and sugars because of their molecular dipole moment (Sutar and Prasad, 2007). Therefore, the first step of the research involved the evaluation of the effects of microwave treatments on the mortality of one of the most feared insects (E. kuehniella) during the almond\u2019s storage phase.", "mime": "application/pdf"}, {"id": "cet-13505", "words": "4174", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13505", "date": null, "keywords": "control; ct+ol; days; film; food; meat; phb; pla; pork; samples; values", "summary": "Then, all the results were expressed as the logarithm of CFU (colony-forming units) per g of fresh meat sample. 85 mailto:andrea.bassani@unicatt.it Based on these promises, the purpose of this study was to test the application on fresh pork meat of two different coatings formulations (methylcellulose or chitosan based)", "mime": "application/pdf"}, {"id": "cet-13506", "words": "3840", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13506", "date": null, "keywords": "barrier; bilayer; ecovio; films; food; layer; outer; oxygen; packaging; phb; pla", "summary": "Single layer films were also produced for comparison. Coextruded films based on the blends were realized by a Gimac film blowing unit equipped by two single screw extruders (D = 12 mm, L/D = 24), a blow film spiral mandrel die (Collin, Type RWT 25, Din=30 mm, Dext=30.5 mm) and a take-up/cooling system (Collin Film Blowing Line Type BL 50).", "mime": "application/pdf"}, {"id": "cet-13507", "words": "3241", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13507", "date": null, "keywords": "barrier; blends; cm-1; films; packaging; pbs; polymers; pvoh", "summary": "The oxygen permeability measurements revealed the improvement of the O2 barrier performance of the PBS/PVOH based films, thanks to the excellent barrier properties of PVOH: in particular, a decrease in PO2 values equal to 24 % and 42% for PBS/PVOH 80/20 and PBS/PVOH 60/40, respectively, was achieved with respect to neat PBS film. Absorption characteristic peaks of PVOH film are: - OH stretching at 3272 cm-1; asymmetric and symmetric stretching of CH2 groups at 2936 and 2902 cm-1 respectively; H-O-H bending of the absorbed water at 1644 cm-1; C=C stretching at 1538 cm-1; CH2 bending and wagging at 1415 cm-1 and 1324 cm-1, respectively; a peak imputable to the CO stretching is noticeable at 99 1138 cm-1, and identifies the crystalline sequence of PVOH (Tretinnikov and Zagorskaya, 2012) while the sharp peak at 1086 cm-1, referred to the C-O stretching and the OH bending, identifies the amorphous phase; finally, peaks due to CH2 rocking and C-C stretching are noticeable at 911 cm-1 and 827 cm-1, respectively (Jipa et al., 2012).", "mime": "application/pdf"}, {"id": "cet-13508", "words": "3583", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13508", "date": null, "keywords": "activity; enzyme; figure; glucanase; hydrolysis; substrate; temperature; tvir30; \u03b2-1,6", "summary": "The chromatogram (Figure 1) shows that the elution of Tvir30 occurred over two fractions, as evidenced by the peak in absorbance at 280 nm and the corresponding peak in \u03b2-1,6-glucanase activity. Absorbance at 280 nm is represented by blue points and enzyme activity against pustulan at 30oC, pH 6.0 by orange points.", "mime": "application/pdf"}, {"id": "cet-13509", "words": "4123", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-13509", "date": null, "keywords": "c3n4; et al; ethylene; figure; light; samples; tio2", "summary": "The band gap energies were estimated by Kubelka-Munk function and Tauc\u2019s plot: (F(R)hv)2/n versus Energy (eV), considering indirect allowed transition (n = 4) for TiO2 samples (L\u00f3pez and G\u00f3mez, 2012) and direct transition (n = 1) for C3N4 composites (Huo et al., 2018), as shown in Figure 2f. Textural parameters (surface area, average pore diameter, pore volume) and particle size positively affected Ni-doped TiO2 samples\u2019 photoactivity.", "mime": "application/pdf"}, {"id": "cet-1351", "words": "3139", "extension": ".pdf", "flesch": "50", "author": "Cavallo, E.; Pampuro, N.", "title": "Effects of Compressing Pressure on Briquettes Made from Woody Biomass ", "date": "2017", "keywords": "biomass; briquettes; compression; density; durability; energy; pressure", "summary": "The study focused on the energetic demand required by the briquettes production and on briquettes density and durability, being the properties that mostly affect briquettes quality during handling, transportation and storage. The ANOVA showed significant effect (p<0.05) on briquette bulk density of the five levels of pressure applied during the experimental pelletizing process (20, 30, 50, 80 and 110 MPa).", "mime": "application/pdf"}, {"id": "cet-13510", "words": "3651", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13510", "date": null, "keywords": "dough; parameters; production; properties; salt; time", "summary": "The dependency of the viscoelastic module with the strain frequency for semolina doughs is well described by the weak gel model (Gabriele et al., 2001), which considers the presence of a supramolecular structure formed by droplets, solid particles, fibres, etc. Conclusions The rheological properties of semolina dough are influenced by its formulation and production conditions in a complex way.", "mime": "application/pdf"}, {"id": "cet-13511", "words": "4143", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13511", "date": null, "keywords": "egg; flour; germination; lentil; malt; pasta; seeds; starch", "summary": "In this work, the malting process of lentil seeds (Lens culinaris) was set-up to minimize their anti-nutrient content. The moisture content of lentil seeds undergoing steeping, germination, or kilning, as roughly divided in parts,", "mime": "application/pdf"}, {"id": "cet-13512", "words": "2504", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13512", "date": null, "keywords": "chemical; course; engineering; food; problem; production; students", "summary": "As such, a significant number of graduates work in food process industries, the core of cooking is chemical transformation after all. The core food-science related course outcomes are for students to develop: 1) Their understanding of the chemical constituents of foods; 2) A familiarity with the most common reaction families in food production; 3) An understanding of the colloid and surface chemistry that occurs in many food systems; 4)", "mime": "application/pdf"}, {"id": "cet-13513", "words": "3837", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13513", "date": null, "keywords": "food; kernels; min; peeling; products; samples; stability; walnuts", "summary": "Further studies will be useful to better investigate the impact of different peeling treatments on the taste and the long-time stability of products also through a sensory analysis and an accelerated shelf-life study. Pellicle removal may be essential for further processing, for technological and sensory issues (Liu et al., 2021).", "mime": "application/pdf"}, {"id": "cet-13514", "words": "3233", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13514", "date": null, "keywords": "analogue; cfu; content; food; meat; pressure; processing; \u02c21,0; \u02e3101", "summary": "When developing models for the processing of matrices of plant and animal raw materials using high-pressure technology, for varying parameters of pressure, time, packaging and duration, it was established that the high-pressure exposure model must be selected taking into account the composition and properties of the product, the purposeful application of other microorganism inhibiting factors to achieve synergistic action, because exposure to high pressure alone does not ensure the destruction of bacteria in a model system. 139 To eliminate spores at high pressure, the process can be divided into two stages, as in the case of tyndallisation, the first effect at lower pressure promotes the germination of spores, then the germinated spores are inactivated (Reddy et.al., 2006).", "mime": "application/pdf"}, {"id": "cet-13515", "words": "4264", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13515", "date": null, "keywords": "color; cut; food; inactivation; pressure; products", "summary": "Rashid, M. H., Khan, M. R., Roobab, U., Rajoka, M. S. R., Inam-ur-Raheem, M., Anwar, R., Ahmed, W., Jahan, M., Ijaz, M. R. A., Asghar, M. M., Shabbir, M. A., and Aadil, R. M. (2021). In the last decades, many novel low-temperature pasteurization technologies have been widely studied to extend the shelf-life and safety of fresh products without compromising their organoleptic qualities.", "mime": "application/pdf"}, {"id": "cet-13516", "words": "3379", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13516", "date": null, "keywords": "cellulose; hph; oil; particles; suspensions; water", "summary": "High-pressure homogenization (HPH), a purely mechanical cell disruption technology, was directly applied to oil suspensions of WM or CL. By advancing the understanding of the mechanism of network formation of oil suspensions using high-pressure homogenization (HPH), a contribution will be given to developing new applications in oil structuring.", "mime": "application/pdf"}, {"id": "cet-13517", "words": "3117", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13517", "date": null, "keywords": "consumption; decanter; energy; flow; motor; power; rate", "summary": "The approach to energy consumption prediction based on time series analysis, until develop the trends in energy consumption data has proven to be an effective way to understand the energy consumption of a machine as reported by several authors (Xie et al, 2021; Lee et al., 2015; Imani et al., 2017; Liu et al., 2015; Perone et al., 2022; Tamborrino et al., 2021; Catalano et al., 2021). The reduction of energy consumption can be effective only if a set of strategies are implemented in the energy use chain, which can be large-scale such as the use of energy from renewable sources to small-scale solutions such as optimizing plants of lighting (Qusay et al., 2023; Jun et al., 2020).", "mime": "application/pdf"}, {"id": "cet-13518", "words": "3783", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13518", "date": null, "keywords": "extraction; food; oil; olive; pef; plant; technology; treatment; variety", "summary": "PEF treatment has been shown to enhance the quality of olive oil by improving its sensory and nutritional properties, as well as increasing its yield. During PEF treatment, olives or olive pastes are subjected to a high-voltage electric field for a very short period placing a PEF system at the beginning of the process to treat the olives or between the crusher and kneaders to treat the pastes.", "mime": "application/pdf"}, {"id": "cet-13519", "words": "2857", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13519", "date": null, "keywords": "april; data; hive; honey; monitoring; production; site; study; system", "summary": "Figure 2: Dadant Blatt type hives during positioning in site B. The developed system consisted of a series of sensors connected to a microcontroller, which acquires the data and periodically sends them to a server via modem. Although the initial weight of the hives is similar (35 \u00b1 1 kg), at the end of the period considered there is a difference of about 10 kg between the most productive hive (hive 2) and the least productive (hive 1).", "mime": "application/pdf"}, {"id": "cet-1352", "words": "2494", "extension": ".pdf", "flesch": "42", "author": "Zema, D.A.; Nicotra, A.; Tamburino, V.; Zimbone, S.M.", "title": "Energy Production by Small Hydro Power Plants in Collective Irrigation Systems of Calabria (Southern Italy) ", "date": "2017", "keywords": "calabria; energy; irrigation; plants; power; shp; systems", "summary": "Applying at the regional scale a previously developed model to evaluate the technical and economic feasibility of SHP plants in existing irrigation systems, this paper estimates the theoretical energy production and the economic performances of SHP plants installed in the WUAs operating in Calabria. SHP plants, showing easy operation and maintenance, cheap electricity generation prices and environmentally sustainability (Laghari et al., 2013; Yah et al., 2017), are considered excellent options for rural electrification in remote and decentralised areas, characterized by proper potential or existing irrigation systems (Cavazzini et al., 2016).", "mime": "application/pdf"}, {"id": "cet-13520", "words": "3548", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13520", "date": null, "keywords": "acid; alkaline; cellulose; chemical; food; hph; hydrolysis; lignin; nanocellulose; treatment", "summary": "In general, the HPH treatment had a disruptive effect on the tomato structure, making cellulose isolation more efficient. With respect to tomato pomce an increase in cellulose isolation of about 10 % and 5 % has been achieved for HPH treatment applied on raw material and after alkaline hydrolysis, respectively.", "mime": "application/pdf"}, {"id": "cet-13521", "words": "3870", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13521", "date": null, "keywords": "activity; cmc; dysphagia; food; level; pear; properties; protein; purees; shear; swallowing; viscosity", "summary": "The viscosity of pear purees was measured across shear rates ranging from 10 to 200 s-1 that is mentioned as the shear rate regime occurring during swallowing (Qazi et al., 2019). Table 2: Viscosity values at 50 s-1, flow index (n) and tixotropy index of pear purees.", "mime": "application/pdf"}, {"id": "cet-13522", "words": "3926", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13522", "date": null, "keywords": "cinerea; control; f2h; hibiscus; inhibition; kombucha; pda; strawberries; tea", "summary": "https://doi.org/10.1016/j.foodchem.2016.11.127 Reis, C. M. dos, Azevedo, L. M. S., & Casteluber, M. C. da F. (2021). https://doi.org/10.1016/j.lwt.2011.12.033 Bhattacharya, D., Bhattacharya, S., Patra, M. M., Chakravorty, S., Sarkar, S., Chakraborty, W., Koley, H., & Gachhui, R. (2016).", "mime": "application/pdf"}, {"id": "cet-13523", "words": "3421", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13523", "date": null, "keywords": "dsc; evoo; min; oil; oleogel; oxidation; rate; temperature", "summary": "The results obtained in this study should not surprise if we consider that oleogels, based on the immobilization of oil in a gel structure, were found to oxidize slower than bulk oil and, therefore, the oleogel technology is often used as a method to prevent oil oxidation (Willet and Akoh, 2019; Vellido-Perez et al., 2019; Hwang et al., 2018). In particular, non-isothermal DSC (linear heating rate, \u03b2) has been applied in several studies of edible oils oxidation (Qi et al., 2016; Martinez-Monteagudo et al., 2012;", "mime": "application/pdf"}, {"id": "cet-13524", "words": "3840", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13524", "date": null, "keywords": "control; food; germination; lentils; properties; samples; starch", "summary": "As is well known, a whole spectrum of hydrolytic enzymes, including \u03b1-amylase, glucosidase, and dextranase are generated from the aleurone layer of pulse seeds, and \u03b2-amylase existing in the endosperm, is activated during pulse seeds germination (Olaerts et al., 2016). In the end, the water was drained, and seed samples were ready to be germinated under a wet cloth in a dark condition for 24 (G) and 48 (H) hours.", "mime": "application/pdf"}, {"id": "cet-13525", "words": "3790", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13525", "date": null, "keywords": "cherry; coating; control; days; effect; samples; storage; tomatoes", "summary": "The combination of PAW and SC/GG/BW edible coating on MP cherry tomatoes stored at 4\u00b0C up to 14 days did not affected the pH, TSS, weight loss and firmness of cherry tomatoes. Respiration rate results showed that SC/CH coating did not affect the respiration rate of MP cherry tomatoes, whereas SC/GG blends at 0.2 % was able to reduce the respiration rate of almost the 50% at 20\u00b0C.", "mime": "application/pdf"}, {"id": "cet-13526", "words": "3995", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13526", "date": null, "keywords": "analysis; aoac; atlantic; autumn; bonito; content; fillets; fish; min; sarda; spring", "summary": "Results showed no significant differences in water activity, carbohydrates, chlorides, and fibre between fish fillets\u2019 capture in Spring and Autumn (p\u02c30.05). Lipid content results showed that fish fillets from Autumn were 6.32-fold higher than Spring fish fillets, 7.55 \u00b1 0.29 % and 1.21 \u00b1 0.32 %, respectively (p<0.05).", "mime": "application/pdf"}, {"id": "cet-13527", "words": "3033", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13527", "date": null, "keywords": "meat; nitrite; pcae; perfringens; samples; sausage; sodium; susceptibility; test", "summary": "In the study carried out by Myers et al. (2013), using synthetic nitrite and celery powder, it was reported that nitrite values, when coming from a natural source, are more stable and decrease at a slower kinetics compared to synthetic nitrite. Table 5: Physical-chemical analyzes for fresh sausage samples (mean \u00b1 standard deviation).", "mime": "application/pdf"}, {"id": "cet-13528", "words": "4062", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13528", "date": null, "keywords": "association; business; cajamarca; fruit; goldenberry; governance; industry; market; per\u00fa; producers; production; research; transaction", "summary": "Mejoramiento de la capacidad productiva y comercial de aguaymanto de la asociaci\u00f3n provincial de productores ecol\u00f3gicos de la provincia de Cajamarca. Citogen\u00e9tica comparativa de Physalis peruviana en tres poblaciones cultivadas de Cajamarca, Per\u00fa.", "mime": "application/pdf"}, {"id": "cet-13529", "words": "3521", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13529", "date": null, "keywords": "consumption; ethanol; fermentation; flour; production; starch; total; yam", "summary": "This food has a starch content like corn; therefore, food industries use yam starch as a corn starch alternative. Enzymatic hydrolysis was used to convert starch into fermentable sugars (yam flour and potato starch).", "mime": "application/pdf"}, {"id": "cet-1353", "words": "3470", "extension": ".pdf", "flesch": "52", "author": "Valenti, F.; Porto, S.M.C.; Chinnici, G.; Cascone, G.; Arcidiacono, C.", "title": "Assessment of Citrus Pulp Availability for Biogas Production by Using a GIS-based Model: the Case Study of an Area in Southern Italy ", "date": "2017", "keywords": "biogas; catania; citrus; citrus pulp; data; processing; production; pulp; study", "summary": "To this aim a GIS-based model, previously defined and applied to evaluate the amount of citrus pulp production at a regional level, was applied to the case study of Catania province (Sicily, Italy). To this aim, citrus producing areas and citrus production as well as the average percentage of citrus pulp production and its availability were computed for each municipality.", "mime": "application/pdf"}, {"id": "cet-13530", "words": "3268", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13530", "date": null, "keywords": "children; energy; fao; feed; food; formulation; peru; spanish; total", "summary": "Soy flour 17.000 Stabilizer (Montana S.A.) 0.050 Sugar 23.800 Salt 0.300 Total 100.000 Table 2: Nutrients of the fortified food Nutrients Quantity Nutrients Quantity Protein 18.26 % Leucine 4.49 g/100g Fat 8.97 % Lysine 3.90 g/100g Fiber 3.31 % Met+Cist 1.47 g100g Ash 3.02 % Threonine 2.54 g/100g Nitrogen Free Extract 66.44 % Tryptophan 0.72 g/100g Metabolizable Energy 419.50 kcal/100 g Valine 3.14 g/100g Phenyl + Tyrosine 4.98 g/100 g Calcium 500.00 mg/100g Histidine 1.44 g/100g Available Phosphorus 257.73 mg7100g Isoleucine 2.87 g/100g 238 3.2 Essential amino acids in fortified food The amino acid content of the processed food is presented and compared with a standard of these components on a dry basis recommended by FAO (1994), see Table 3. Where: HSf: Moisture content of the final suspension (%)", "mime": "application/pdf"}, {"id": "cet-13531", "words": "3552", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13531", "date": null, "keywords": "min; ogt; ozone; properties; quinoa; starch; starches", "summary": "dFood Research Center (FoRC), University of S\u00e3o Paulo, S\u00e3o Paulo, SP, Brazil bel@usp.br Native starch has limitations such as low water solubility and high viscosity. Quinoa starch suspensions (10wt%, db) were submitted to the modification process by the application of ozone at different times (OGT = 10, 20 and 30 min), with native starch as the control.", "mime": "application/pdf"}, {"id": "cet-13532", "words": "3495", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13532", "date": null, "keywords": "concentration; emulsification; emulsions; nanoparticles; pickering; stability; starch; time", "summary": "In this study, Pickering emulsions stabilized by different concentrations of modified starch nanoparticles (HSNP), and various emulsification times were evaluated in terms of physical stability, rheological properties (flow curves) and microstructure. Introduction The application of natural biocolloidal particles is one of the promising alternatives (green label) to produce Pickering emulsions.", "mime": "application/pdf"}, {"id": "cet-13533", "words": "3383", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13533", "date": null, "keywords": "conductivity; dough; ert; figure; flour; gluten; mixing; time; tomogram", "summary": "example of P1 tomogram (#246, corresponding to time 500s, A3) which consists of 316 cells from which the average is calculated, the colour bar refers to non-dimensional conductivity [-]; b-Plot of the average non-dimensional conductivity for P1 for the 1000 acquired tomograms, As it is shown in Figure 2b, A1-6 are the additions of flour, all additions show a similar trend where there is a first decrease (induced by the entrapment of air with the flour) and then an exponential rapid increase of the average conductivity once the flour is wetted. federico.alberini@unibo.it In this study, for the first time Electro Resistance Tomography is employed for macroscale (bulk) characterization of gluten free dough during mixing in 1L scale vessel.", "mime": "application/pdf"}, {"id": "cet-13534", "words": "4153", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13534", "date": null, "keywords": "air; drying; ehd; energy; heat; martynenko; material; technology", "summary": "The energy efficiency of drying technology was quantified by specific energy consumption (SEC) in kJ/kg of evaporated water. Conical corona wind jets with different spacing of two pin-type emitters (# 1 and # 2), and the trace of multiple corona wind jets on drying materials in regular (a) and staggered (b) arrangement.", "mime": "application/pdf"}, {"id": "cet-13535", "words": "4463", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13535", "date": null, "keywords": "acid; caffeine; coffee; compounds; ethanol; extraction; extracts; gts; min; scg; stl; tea; water", "summary": "SCG extracts were analysed according to Vignoli et al. (2011). In SCG extracts, chlorogenic acid was detected at 320 nm and caffeine was detected at 272 nm.", "mime": "application/pdf"}, {"id": "cet-1354", "words": "4299", "extension": ".pdf", "flesch": "61", "author": "Licata, M.; La Bella, S.; Leto, C.; Bonsangue, G.; Gennaro, M.C.; Tuttolomondo, T.", "title": "Agronomic Evaluation of Ethiopian Mustard (brassica Carinata A. Braun) Germplasm and Physical-energy Characterization of Crop Residues in a Semi-arid Area of Sicily (italy)", "date": "2017", "keywords": "agricultural; biomass; brassica; carinata; content; crop; energy; pellet; residues", "summary": "Scarlat N., Martinov M., Dallemand J.F., 2010, Assessment of the availability of agricultural crop residues in the European Union: potential and limitations for bioenergy use, Waste Manag. 30(10), 1889-1897. Sunflower stalks 17.71 8.31 10.40 Rapeseed straw 17.78 7.51 9.12 Ethiopian mustard straw 18.53 5.50 7.90 Cardoon straw 17.84 8.11 8.30 The ash content values of Brassica carinata residues were found to be similar to reference values.", "mime": "application/pdf"}, {"id": "cet-1355", "words": "3279", "extension": ".pdf", "flesch": "41", "author": "Hernandez, M.A.; Jaime, C.; Romero, J.; Leon-Pulido, J.; Cabeza, I.O.", "title": "Lignocellulosic Biomass from Fast-Growing Species in Colombia and their Use as Bioresources for Biofuel Production ", "date": "2017", "keywords": "biomass; cauca; colombia; energy; potential; production; species; year", "summary": "In this sense, eleven (11) families were selected and compiled in twenty one (21) species according to soil type and crop requirement. Two main groups were defined during this analysis: species established in Colombia and species not yet reported in Colombia.", "mime": "application/pdf"}, {"id": "cet-1356", "words": "2983", "extension": ".pdf", "flesch": "41", "author": "Leon-Pulido, J.; Sarmiento, M.P.; Garzon, D.M.; Hernandez, M.A.; Gonzalez, A.D.; Peralta-Ruiz, Y.Y.; Duran, M.A.", "title": "Energy Study of Reactive-HIDiC Simulation for Ethyl Acetate Synthesis from Acetic Acid ", "date": "2017", "keywords": "acetate; column; distillation; energy; ethyl; heat; hidic; reactive; section", "summary": "Conclusions In this paper, simulation studies about reactive distillation column for ethyl acetate process was developed. Huang K., Iwakabe K., Nakaiwa M., Tsutsumi A., 2005, Toward further internal heat integration in design of reactive distillation columns \u2013 Part I: The design principle.", "mime": "application/pdf"}, {"id": "cet-1357", "words": "4053", "extension": ".pdf", "flesch": "43", "author": "Attard, G.; Comparetti, A.; Febo, P.; Greco, C.; Mammano, M.M.; Orlando, S.", "title": "Case Study of Potential Production of Renewable Energy Sources (RES) from Livestock Wastes in Mediterranean Islands ", "date": "2017", "keywords": "animal; biogas; biomethane; energy; livestock; malta; manure; mediterranean; potential; production; slurry", "summary": "Comparetti A., Greco C., Navickas K., Venslauskas K., 2012, Evaluation of potential biogas production in Sicily, Proceedings of the 11th International Scientific Conference \u201cEngineering for Rural Development\u201d, Jelgava, Latvia, 24-25 May 2012, 555-559. The potential biogas production (Bm) from animal manure has been determined according to the following Eq.", "mime": "application/pdf"}, {"id": "cet-1358", "words": "3438", "extension": ".pdf", "flesch": "47", "author": "Comparetti, A.; Febo, P.; Greco, C.; Mammano, M.M.; Orlando, S.", "title": "Potential Production of Biogas from Prinkly Pear (Opuntia ficus-indica L.) in Sicilian Uncultivated Areas ", "date": "2017", "keywords": "areas; biogas; energy; pear; potential; prinkly; production; sicilian", "summary": "563 Comparetti A., Greco C., Navickas K., Venslauskas K., 2012, Evaluation of potential biogas production in Sicily, Proceedings of the 11th International Scientific Conference \u201cEngineering for Rural Development\u201d, Jelgava, Latvia, 24-25 May 2012, 555-559. This increased demand might be met through the cultivation of high WUE plants, having the capacity for high biomass production, such as Opuntia spp.", "mime": "application/pdf"}, {"id": "cet-1359", "words": "3496", "extension": ".pdf", "flesch": "54", "author": "Jia, Y.; Zheng, B.; Zhang, Y.", "title": "Looking for the Ideal Conditions for Corn Kernel Image Acquisition ", "date": "2017", "keywords": "auxiliary; corn; grain; image; light; objective; source", "summary": "DOI: 10.3303/CET1758095 Please cite this article as: Jia Y., Zheng B., Zhang Y., 2017, Looking for the ideal conditions for corn kernel image acquisition, Chemical Engineering Transactions, 58, 565-570 DOI: 10.3303/CET1758095 565 1. The experiment box includes main light source, auxiliary light source, a lifter that could adjust the distance of the object and the camera lens and a stage which held the corn grain.", "mime": "application/pdf"}, {"id": "cet-1360", "words": "3013", "extension": ".pdf", "flesch": "62", "author": "Bourges, G.; Eliach, J.J.; Medina, M.A.", "title": "Numerical Evaluation of a Seed Distributor Head for Air Seeders ", "date": "2017", "keywords": "air; bourges; distributor; drill; flow; head; model; particle; seeds; time", "summary": "Bourges (et al, 2009) evaluate the incidence of dents in the inlet tube, in the distribution of air flow in a distributor head is analyzed. Thereafter, air flow enters the field expansion, where is splitted between the outlets tubes.", "mime": "application/pdf"}, {"id": "cet-1361", "words": "2845", "extension": ".pdf", "flesch": "45", "author": "Braga, R.", "title": "Challenges to Apply the Biospeckle Laser Technique in the Field ", "date": "2017", "keywords": "activity; braga; laser; level; light; speckle", "summary": "Microsoft Word - 1murphy.docx CHEMICAL ENGINEERING TRANSACTIONS VOL. 58, 2017 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Remigio Berruto, Pietro Catania, Mariangela Vallone Copyright \u00a9 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-52-5; ISSN 2283-9216 Challenges to Apply the Biospeckle Laser Technique in the Field Roberto A. Braga Federal University of Lavras, CP 3037 Lavras 37200-000 MG Brazil robertobraga@deg.ufla.br Biospeckle laser, or dynamic laser speckle, is used as a technique when its outcomes are useful to monitor activity of the illuminated sample. The library was constructed in M Code related to MATLAB and Octave platforms, with free access of raw data of dynamic laser speckle (http://www.nongnu.org/bsltl/).", "mime": "application/pdf"}, {"id": "cet-1362", "words": "3727", "extension": ".pdf", "flesch": "58", "author": "Schindhelm, K.; Lorenzini, I.; Tremblay, M.; Dopfer, D.; Reese, S.; Haidn, B.", "title": "Automatically Recorded Performance and Behaviour Parameters as Risk Factors for Lameness in Dairy Cattle ", "date": "2017", "keywords": "data; day; duration; feed; feeding; lameness; lying; milk; parameters", "summary": "A \u201clame\u201d-\u201cnon-lame\u201d cow days ratio of 50:50 was achieved by using the SMOTE (Synthetic Minority Over-sampling Technique) algorithm (Chawla et al., 2002) before the analysis where the minority class (lame cow days) is up-sampled and the majority class is down-sampled. The pain caused by hoof lesions could be increased by this uneven weight distribution and lame cows would then avoid to change their position from standing to lying and vice versa.", "mime": "application/pdf"}, {"id": "cet-1363", "words": "2549", "extension": ".pdf", "flesch": "53", "author": "Barge, P.; Comba, L.; Gay, P.; Ricauda, D.; Tortia, C.; Aghilinateg, N.; Dalvand, M.J.", "title": "Performance Optimization of Neural-Network Based Colour Measurement Tools for Food Applications ", "date": "2017", "keywords": "ann; colorchecker; colour; food; network; rgb; zone", "summary": "The performance was tested separately for different colours using a commercial palette used by photographers for camera calibration. The ColorChecker Color Rendition chart contains 24 patch of different colours (McCamy et al., 1976) and is widely used in photographic and video sectors for calibration purposes of imaging devices.", "mime": "application/pdf"}, {"id": "cet-1364", "words": "3625", "extension": ".pdf", "flesch": "35", "author": "Maze, M.; Zerhusen, B.; Effenberger, M.", "title": "A Database Approach for Simulating the Produced Greenhouse Gas Emissions from Biogas Plants ", "date": "2017", "keywords": "biogas; database; emissions; energy; ghg; input; model; plant; production; utilization; web", "summary": "The accounting of the GHGs produced from biogas plants is an essential step for evaluating and improving this type of energy supply. Please cite this article as: Maze M., Zerhusen B., Effenberger M., 2017, A database approach for simulating the produced greenhouse gas emissions from biogas plants, Chemical Engineering Transactions, 58, 595-600 DOI: 10.3303/CET1758100 595 Here we present a database approach for assembling a biogas system model and calculating the expected GHG emissions from it, taking into consideration the environmental and technical factors.", "mime": "application/pdf"}, {"id": "cet-1365", "words": "2460", "extension": ".pdf", "flesch": "46", "author": "Rustia, D.J.A.; Lin, T.T.", "title": "An IoT-based Wireless Imaging and Sensor Node System for Remote Greenhouse Pest Monitoring ", "date": "2017", "keywords": "count; greenhouse; image; insect; node; pest; system", "summary": "This phenomenon led to an abrupt rise in the number of insect pest counts as proven also by their correlation values as shown in Table 2. The experimental results show that the algorithm was able to successfully count the number of insect pests with an average accuracy of 95-98% regardless of the insect pest population as shown in Table 1.", "mime": "application/pdf"}, {"id": "cet-1366", "words": "3907", "extension": ".pdf", "flesch": "55", "author": "Sannino, M.; Faugno, S.; Crimaldi, M.; Ardito, L.; Di Francia, A.; Masucci, F.", "title": "Automatic Milking System Occupation Rate Analysis and Optimization Applied to Mediterranean Buffaloes ", "date": "2017", "keywords": "ams; buffaloes; milking; number; rate; time; working; year", "summary": "Milking time per AMS in one year (hh:mm) (MTAy) Jacobs J.A., Siegford J.M., 2012, Invited review: The impact of automatic milking systems on dairy cow management, behavior, health, and welfare, J. Dairy Sci., 95, 2227-47.", "mime": "application/pdf"}, {"id": "cet-1367", "words": "2948", "extension": ".pdf", "flesch": "52", "author": "Guido, V.; Mercenaro, L.; Gambella, F.", "title": "Application of Proximal Sensing in Viticulture: Comparison of Different Berry State Conditions ", "date": "2017", "keywords": "anthocyanins; berries; cfg; content; et al; field; fluorescence; grape; index", "summary": "The fluorimetric probe called Multiplex3\u00ae (Force-A, Paris, France) is an optical portable sensor successfully used for the non-destructive and fast monitoring of grape maturity (Agati et al., 2013) that finds large application in precision viticulture (Bramley et al., 2011). However, few authors have analyzed the differences between the measurements in field and in laboratory (Cerovic et al., 2008; BenGhozlen et al., 2010a,b; Bramley et al., 2011), or in field and in winery (Diago et al., 2013).", "mime": "application/pdf"}, {"id": "cet-1368", "words": "3737", "extension": ".pdf", "flesch": "45", "author": "Davino, S.; Panno, S.; Arrigo, M.; La Rocca, M.; Caruso, A.G.; Lo Bosco, G.", "title": "Planthology: an Application System for Plant Diseases Management ", "date": "2017", "keywords": "application; case; diseases; information; mobile; pathologists; planthology; server; system; user; web", "summary": "The collected and validated case studies will feed a dynamic atlas of plant diseases that could contribute to the global dissemination of knowledge of the symptoms inducted by plant diseases. In this paper we focus on learning on the job, as well as supporting agronomists involved in farm management, by a mobile platform that involve a set of plant pathologists for the remote diagnosis of plant diseases and providing a therapy.", "mime": "application/pdf"}, {"id": "cet-13684", "words": "3372", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13684", "date": null, "keywords": "cost; exergy; function; heat; losses; network; objective; tac; water", "summary": "Bogataj M., Bagajewicz M.J., 2008, Synthesis of non-isothermal heat integrated water networks in chemical processes, Computers & Chemical Engineering, 32, 3130-3142. The water network (WN) and heat exchanger network (HEN) are interconnected, enabling heat integration of water streams by direct heat exchange.", "mime": "application/pdf"}, {"id": "cet-13685", "words": "3139", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13685", "date": null, "keywords": "carbon; cost; emission; energy; india; pricing; scenarios; study; transportation; year", "summary": "The study reveals that a reduction in the time gap between the year of implementation and the year of achieving net-zero emissions will lead to an increase in carbon prices. The implementation of carbon prices resulted in considerable emission reductions, as well as variations in service demand and energy usage patterns in the transport sector.", "mime": "application/pdf"}, {"id": "cet-13686", "words": "3432", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13686", "date": null, "keywords": "capture; carbon; change; climate; co2; ethylene; impact; processes; production; system", "summary": "The GWPs of conventional ethylene production in China (Zhao et al., 2018) from the processes of Shale Gas Steam Cracking (SSC), Methanol to Olefins (NGMTO), Corn-based and Cassava-based Ethanol to Ethylene (ETE) 817 were determined in the ranges of 0.75 - 1.05, 2.1, 2.7 - 4.1 and 4.3 - 7.4 kg CO2 eq / kg of ethylene production, respectively. The climate change footprint savings of 116.87 %, 120 %, and 112.46 % occurred due to the adoption of the CO2 captured processes as compared with conventional ethylene production processes using naphtha, thane, and Ethanol as resources, respectively.", "mime": "application/pdf"}, {"id": "cet-13687", "words": "3872", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13687", "date": null, "keywords": "coalition; companies; company; cooperative; cost; energy; model; multi; p2p; system; trading; utility", "summary": "Introduction The concern about climate change on energy systems has made clear the urgency of establishing the sustainable balance of the energy trilemma in energy system planning regarding energy security, energy equity and environmental sustainability (World Energy Council, 2022). Table 1 shows the utility cost factor, carbon emission factor and energy trading cost.", "mime": "application/pdf"}, {"id": "cet-13688", "words": "2935", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13688", "date": null, "keywords": "ag2s; bandgap; dye; fes; light; nis; zno", "summary": "The sharp and intense peaks of pristine ZnO with 2\u03b8 values of 37.1\u00b0, 40.2\u00b0, 42.3\u00b0, 55.8\u00b0, 66.8\u00b0, 74.5\u00b0 and 80.9\u00b0 corresponding to the crystal planes (100), (002), (101), (102), (110), (103) and (112), are in good agreement with the hexagonal wurtzite structure of ZnO and further shows the high crystallinity and purity of the crystals (Ichipi et al., 2022). The determined bandgap energy of pristine ZnO ~ 3.30 eV whilst a redshift is noted in the metallic sulphur-based/ZnO nanocomposites reporting reduced bandgap energy values of 2.15 eV, 1.91 eV and 1.85 eV for Ag2S/ZnO, FeS/ZnO and NiS/ZnO.", "mime": "application/pdf"}, {"id": "cet-13689", "words": "3698", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13689", "date": null, "keywords": "absorption; co2; gas; liquid; mass; mea; model; phase; transfer", "summary": "Such phenomena include variations in gas phase pressure, temperature, and CO2 mass flow rate. Existing models often incorporate simplifying assumptions and rarely capture the simultaneous variations of critical phenomena inside the RPB apparatus, such as gas phase CO2 mass flow rate, liquid and gas temperatures, and pressure drop.", "mime": "application/pdf"}, {"id": "cet-1369", "words": "3101", "extension": ".pdf", "flesch": "38", "author": "Sarghini, F.; De Vivo, A.", "title": "Analysis of Preliminary Design Requirements of a Heavy Lift Multirotor Drone for Agricultural Use ", "date": "2017", "keywords": "analysis; flight; motor; payload; power; uav; use; weight", "summary": "A possible choice relies on using a Ready To Fly (RTF) UAV, but rapid changes in components and a fast evolution of the performance of engines and batteries allow possible updates of the existing UAV using aftermarket part to increase the flight envelope, a particularly interesting feature for heavy lift drone if a proper design method is adopted. Such performance can be considered satisfactory not only to fulfil imaging and crop diagnostic missions, but also to perform more challenging one like plantation or pesticide distribution. 4. Conclusions Integration of components is not a straightforward task due to a lack of an integrated theory, application is challenging since it requires expert knowledge in aerodynamics and control theory, and the commercial development of heavy lift drones it is still today limited to few companies, often with export limitations on aircraft and sensors (i.e. frequency of IR sensors) due to military implications.", "mime": "application/pdf"}, {"id": "cet-13690", "words": "3763", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13690", "date": null, "keywords": "analysis; biomass; carbonisation; energy; htc; hydrochar; hydrothermal; process; sawdust", "summary": "An energy efficiency analysis for a continuous pilot-scale system was conducted by Vallejo et al. (2021). Sawdust \u2013 Density 500 \u2013 900 kg/m3 (20 \u00b0C) (Vallejo et al., 2020)", "mime": "application/pdf"}, {"id": "cet-13691", "words": "3898", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-13691", "date": null, "keywords": "analysis; cansystem; esp; flow; lift; oil; performance; pressure; production; productivity; reservoir; system", "summary": "Combining AutographPC\u00ae and Prosper enables a detailed evaluation of ESP system productivity and performance. CanSystem introduces several improvements to ESP systems, including enhanced productivity, reduced space requirements, and ease of corrosion treatment.", "mime": "application/pdf"}, {"id": "cet-13692", "words": "4170", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13692", "date": null, "keywords": "bgn; costs; dairies; dairy; environmental; markets; milk; production; products; suppliers", "summary": "The present study proposes a mixed integer non-linear programming approach to the optimal design of a sustainable SC for the production of two types of dairy products with a choice of technology, which includes models of economic, environmental and social impact as well as dairy production. The production of dairy products in the relevant supply chains (SCs) is associated with the generation of significant amounts of pollutants in the wastewater and CO2 emissions into the air, which released into the environment can cause a great risk of its pollution.", "mime": "application/pdf"}, {"id": "cet-13693", "words": "3741", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13693", "date": null, "keywords": "cost; demand; energy; grid; network; power; supply; technology", "summary": "These studies ignored the optimal resource allocation, or sharing approach, that meets the demand for energy considering the intermittency in resource availability and variability in energy demand. The energy network developed must be able to meet all the energy requirements for Tsumkwe optimally, irrespective of variations in resource availability and fluctuations in energy demand.", "mime": "application/pdf"}, {"id": "cet-13694", "words": "3072", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13694", "date": null, "keywords": "energy; heat; model; storage; tank; temperature; underground; vapor; water", "summary": "Oc\u0142o\u0144 P., Chin H.H., Kozak-Jagie\u0142a E., Taler J., \u015acis\u0142owicz F., Czamara M., 2023, Photovoltaic\u2013thermal waste heat integration with underground thermal energy storage and heat pump systems, Handbook of Process Integration (PI), Woodhead Publishing Limited, Cambridge, UK, 1017-1042. \u210e2 Water-ground heat transfer coefficient in the non-insulated tank 300 W/(m2\u2219K) \ud835\udf0c\ud835\udc64 Water density 1,000 kg/m3 \ud835\udc50\ud835\udc64 Water specific heat 4,180 J/(kg\u2219K)", "mime": "application/pdf"}, {"id": "cet-13695", "words": "2957", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13695", "date": null, "keywords": "carbon; coal; cycle; gas; life; methanol; polygeneration; process", "summary": "(in Chinese) Liu Y., Wu X., Liu Y., Wang B., 2021, Global heat integration and optimization of coal to natural gas process. /CET23103146 CHEMICAL ENGINEERING TRANSACTIONS VOL. 103, 2023 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Panos Seferlis, Yee Van Fan, Athanasios Papadopoulos Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 979-12-81206-02-1; ISSN 2283-9216 Life Cycle Assessment of Coal-to-SNG/Methanol Polygeneration Process Jing Liu, Yu Zhuang*, Chao Wang, Jian Du Frontiers Science Center for Smart Materials Oriented Chemical Engineering, Institute of Chemical Process Systems Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China zhuangyu@dlut.edu.cn As a kind of clean energy, the demand for natural gas is increasing.", "mime": "application/pdf"}, {"id": "cet-13696", "words": "3933", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13696", "date": null, "keywords": "case; distribution; energy; generation; microgrid; network; planning; power; resilience; resource; scenario; system; utility; wind", "summary": "An increasing acceptance of microgrid systems is primarily driven by emission reduction, resilience, reliability, and stability of energy systems. Using the said data, HOMER Pro\u00ae is used to calculate additional power (renewable or conventional) generator 878 capacities and energy storage system capacities for the distribution utility.", "mime": "application/pdf"}, {"id": "cet-13697", "words": "3779", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13697", "date": null, "keywords": "anode; battery; density; discharge; energy; lithium; model; optimization; parameter; sensitivity", "summary": "Figure 3: Comparison between the base (solid lines) and optimized (dash lines) battery models for the (a) discharge curve and (b) temperature profile for 1 C (red lines) and 0.5 C (black lines) discharge rate The optimized model\u2019s discharge voltage is slightly lower than the base model, as illustrated in Figure 3a. Although common among lithium-ion batteries, LiPo battery parameter optimization, and sensitivity analyses are relatively unexplored territory in research.", "mime": "application/pdf"}, {"id": "cet-13698", "words": "4092", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13698", "date": null, "keywords": "analysis; costs; energy; heating; solar; stess; storage; system; technologies; thermal; water", "summary": "This is why the development, evaluation, and financial analysis of solar thermal energy storage systems for hot water supply and heating is of interest. Solar thermal energy storage systems, which employ phase change materials, and supply heat even during nighttime hours (Hyman, 2011) can be an attractive alternative for inhabitants of high mountain regions, as well as for tourism developments, especially those with a focus on sustainability.", "mime": "application/pdf"}, {"id": "cet-13699", "words": "4419", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13699", "date": null, "keywords": "activity; electrocatalysts; et al; evolution; metal; nickel; oer; overpotential; oxygen; performance; reaction; water", "summary": "The literature reviewed in this study was amalgamated and differentiated to formulate the review method, which is explained further in each section, contributing to a novel approach to understanding and improving OER catalysts. Deng et al. (2017) explored the use of a near-spherical mesoporous NixCoyOz electrocatalyst, which resulted in a low overpotential of 336 mV comparable to that of noble metal electrocatalysts (Table 2).", "mime": "application/pdf"}, {"id": "cet-1370", "words": "2441", "extension": ".pdf", "flesch": "48", "author": "Sarghini, F.; De Vivo, A.", "title": "Interference Analysis of an Heavy Lift Multirotor Drone Flow Field and Transported Spraying System ", "date": "2017", "keywords": "configuration; crop; drones; field; figure; propellers; spraying", "summary": "Such configuration introduces some pros and cons. Multirotor X6 (a) and Y6 (b) configurations In this work two different configurations, showed in Figure 1a and Figure 1b were analysed: an hexacopter with 6 motors mounted on 6 arms (X6) 60\u00b0 apart on a symmetric frame, with three sets of CW and CCW propellers, and a Y6 coaxial configurations with 6 motors mounted on 3 arms 120\u00b0 apart. X6 configuration is similar to the quadcopter, but it provides more lifting capacity due to the larger number of motors.", "mime": "application/pdf"}, {"id": "cet-13700", "words": "3965", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13700", "date": null, "keywords": "analysis; assessment; cycle; data; lca; life; methods; multivariate; pca; results; statistics; systems", "summary": "Bava et al. (2014) Environmental impact analysis of dairy farms PCA, CA, PC 28 dairy farms Mu et al. (2017) Environmental performance of specialized dairy farms MLR, CCA, Outlier detection 55 specialized dairy farms Grados and Schrevens (2019) LCA of potato agricultural in the Central Peruvian Andes CA, LDA, EFA Data from 58 potato pi- lot plots M a te ri a l & E le m e n ts Smith et al. (2021) Chemical element sustainability index for piezoelectric materials PCA, Trend analysis, Monte Carlo Analy- sis 59 chemicals Rydh and Sun (2005) Simplification of LCAs at an early stage of product design LRA, PCA (Sartorius AG, 2023) data of 214 mechanical design materials S u p p ly C h a in Genovese et al. (2017) Del Duca V., Chirone R., Coppola A., Scala F., Salatino P., 2022, Application of multivariate statistical analysis for pyrolysis process optimization.", "mime": "application/pdf"}, {"id": "cet-13701", "words": "3657", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13701", "date": null, "keywords": "block; blockchain; data; energy; hash; heat; information; integration; process; system", "summary": "Procedia Computer Science, 134, 393-398 Chen Y., Chen H., Zhang Y., Han M., Siddula M., Cai Z., 2022, A survey on blockchain systems: Attacks, defenses, and privacy preservation. More secure PoW or PoS mechanisms for adding new blocks can be researched as well.", "mime": "application/pdf"}, {"id": "cet-13702", "words": "3839", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13702", "date": null, "keywords": "energy; heat; integration; kwth; losses; plant; pressure; process; scenario; utility", "summary": "The quantity of multiple utilities demanded above the Pinch regions corresponds to the quantity of heat utility consumed. The transfer of heat energy from a higher temperature to a lower temperature, known as cascading, adheres to the principles of the first law of thermodynamics.", "mime": "application/pdf"}, {"id": "cet-13703", "words": "3249", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13703", "date": null, "keywords": "demand; groundwater; land; model; subsidence; supply; system; water; wells", "summary": "A System Dynamics approach is used to model and simulate the underlying mechanisms of land subsidence and how different factors interact to cause changes in the system over time. The study finds that altering the water supply of the system provides the greatest impact on reducing land subsidence.", "mime": "application/pdf"}, {"id": "cet-13704", "words": "3726", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13704", "date": null, "keywords": "cadmium; copper; current; density; efficiency; electrocoagulation; process; removal; wastewater", "summary": "Run pH Electrical current density (mA/cm2) Simultaneous removal Cu only Cd only Simultaneous removal % Cu removal % Cd removal % Cu removal % Cd removal 1 2.60 1 93.31\u00b10.23 33.31\u00b10.17 98.01\u00b10.02 35.99\u00b10.23 2 2.60 2 99.71\u00b10.00 80.88\u00b10.29 99.55\u00b10.03 95.14\u00b10.00 3 2.60 3 99.75\u00b10.00 98.34\u00b10.05 99.41\u00b10.01 99.76\u00b10.00 Therefore, it is essential to balance the efficiency of metal removal and energy consumption when applying electrocoagulation in wastewater treatments.", "mime": "application/pdf"}, {"id": "cet-13705", "words": "4653", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13705", "date": null, "keywords": "biomass; content; energy; et al; ficus; index; pruning; tree; wt.%", "summary": "https://doi.org/10.1016/B978-0-323-85591-4.00030-1 Ahmad, M. S., Kleme\u0161, J. J., Alhumade, H., Elkamel, A., Mahmood, A., Shen, B., Ibrahim, M., Mukhtar, A., Saqib, S., Asif, S., & Bokhari, A., 2021, Thermo-kinetic study to elucidate the bioenergy potential of Maple Leaf Waste (MLW) by pyrolysis, TGA and kinetic modelling, Fuel, 293, 120349. https://doi.org/10.1016/j.fuel.2021.120349 Ahmad, M. S., Mehmood, M. A., Al Ayed, O. S., Ye, G., Luo, H., Ibrahim, M., Rashid, U., Arbi Nehdi, I., & Qadir, G., 2017, Kinetic analyses and pyrolytic behavior of Para grass (Urochloa mutica) for its bioenergy potential, Bioresource Technology, 224, 708-713.", "mime": "application/pdf"}, {"id": "cet-13706", "words": "2730", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13706", "date": null, "keywords": "bar; dust; ignition; parameters; pressure; safety", "summary": "This article summarizes some of the influential factors that cause a deviation and shows the inherent scattering of dust tests when all other parameters are kept constant. 2 Figure 1: Distribution of the explosion pressures of corn starch for two different concentrations Figure 2: Distribution of the rates of pressure rise of corn starch for two different concentrations Table 1: Determined (dp/dt)-values of the three dust samples and ratios compared to the 60 ms-value for the variation of the ignition delay time of three different dusts This shows that the ignition delay time should not be altered, that even small variations from the igniters may cause a big difference and that there is no simple way to estimate the behaviour for different dusts.", "mime": "application/pdf"}, {"id": "cet-13707", "words": "4198", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13707", "date": null, "keywords": "dust; explosion; ignition; milling; sources", "summary": "Recognizing the importance of understanding and mitigating the risks, this study aims to enhance the industry's knowledge and promote effective strategies for managing dust explosions in the milling industry. By analyzing the characteristics, causes, and preventive measures associated with dust explosions in the milling industry, this study seeks to contribute to a better understanding of the risks involved and promote effective risk management strategies and accident prevention.", "mime": "application/pdf"}, {"id": "cet-13708", "words": "3681", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13708", "date": null, "keywords": "dose; evacuation; fires; node; process; tank; thermal", "summary": "Compared to firefighting, however, studies devoted to planning and optimizing evacuation plans in the event of tank fires, and particularly concurrent tank fires, have been very few. ISBN 979-12-81206-06-9; ISSN 2283-9216 Optimal Evacuation of Process Plants in Case of Tank Fires Nima Khakzada,*, Paul Amyotteb aToronto Metropolitan University, Toronto, Canada bDalhousie University, Halifax, Canada nima.khakzad@torontomu.ca Effective firefighting and evacuation as integral parts of emergency response in petrochemical plants play a key role in protecting human lives in the event of major tank fires.", "mime": "application/pdf"}, {"id": "cet-13709", "words": "3329", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13709", "date": null, "keywords": "basket; biomass; heating; oxygen; pellets; self; size; stability; tests", "summary": "No ignition 18 - - - Raw (7) 180 10 Ignition 19 - - - Raw (7) 170 10 No ignition 20 - - - Raw (7) 220 2.5 Ignition 21 - - - Raw (7) 210 2.5 No ignition 22 - - - Raw (7) 170 15 Ignition 3.3 Thermal stability: influences of biomass size, temperature and basket size Preliminary tests to identify cross-influences of powder/pellets size, temperature and basket size on the thermal stability of biomass storage facilities were first performed by introducing the samples into the cold oven. Figure 3: Determination of the activation energy according to Flynn-Ozawa-Wall method Table 1: Results of thermal stability tests; coded variables Test Coded variables Real variables Results Number x1 x2 x3 Fuel size (mm) T(\u00b0C) Bask. size(cm) Ignit. / tcp (min) 1 0 0 0 Medium (5) 300 10 68.7 2 0 0 0 Medium (5) 300 10 62.5 3 0 0 0 Medium (5) 300 10 70.4 4 0.5 0.866 0 Raw (7) 400 10 93.2 5 1 0 0", "mime": "application/pdf"}, {"id": "cet-1371", "words": "2180", "extension": ".pdf", "flesch": "51", "author": "Marques Da Silva, J.R.; Correia, M.; Dias, A.; Serrano, J.; Nunes, P.", "title": "Vineyard Cover Spraying Evaluation According to Plant Vigour Variations ", "date": "2017", "keywords": "application; canopy; droplet; spray; spraying; time; volume", "summary": "Conclusions Results show that droplet cover goes from 0 % to 30 % with a coefficient of variation normally above 80 %; droplet Volume Median Diameter (VMD) goes from ~100 \u03bcm to ~500 \u03bcm and the ratio between spray volume and canopy volume goes from 0.02 L m-3 to 0.32 L m-3. Dose expression and spray volume rate are key questions for spray applications in orchard and vineyard plantations.", "mime": "application/pdf"}, {"id": "cet-13710", "words": "3509", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13710", "date": null, "keywords": "conditions; data; effects; figure; flow; model; pressure; release", "summary": "The model uses one set of model constants for the entire range of release conditions. Crist S., Sherman P.M., Glass D.R., 1966, Study of the Highly Underexpanded Sonic Jet, AIAA Journal, 4, pp68-71 Daubech, J., Hebrard, J., Jallais, S., Vyazmina, E., Jamois, D., & Verbecke, F., 2015, Un-ignited and ignited high pressure hydrogen releases: Concentration\u2013turbulence mapping and overpressure effects.", "mime": "application/pdf"}, {"id": "cet-13711", "words": "3854", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13711", "date": null, "keywords": "effect; extension; fire; flame; ground; jet; jets; methane", "summary": "Further investigation will be needed to address the effect of vertical obstacles on the shape and dimensions of jet fires, where the Coand\u0103 effect may play a relevant role. 4. Conclusions The effect of the ground proximity on ignited subsonic jets was studied using FDS to characterize the main dimensions of horizontal methane jet fires considering different release heights and flowrates.", "mime": "application/pdf"}, {"id": "cet-13712", "words": "3471", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13712", "date": null, "keywords": "distance; ground; jet; obstacle; pressure; release; set", "summary": "Introduction In industrial plants, jets are one of the most common incident scenarios, as up to 50% of industrial accidents are related to mechanical failure of tanks or flanges (Crowl and Louvar, 2012): if a small break appears in the wall of equipment, where a high-pressure flammable gas is stored, then it exits in the form of jet. To observe more immediately the effect of the second obstacle on the behaviour of the jet, it was decided to divide the maximum extensions of the pair of obstacles jets (ME_pair) by those relating to the respective single cases (ME_single) depending on the distance of the first obstacle from the point of release.", "mime": "application/pdf"}, {"id": "cet-13713", "words": "3272", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13713", "date": null, "keywords": "agent; cell; efficiency; extinguishing; figure; fire; lithium; test", "summary": "Extinguisher Flowrate/Jet (L/min) Test Code (ID-Ext-Supp-%-Jet) 4 14/11/22 K-SPLB-40 F500 2 13.2 / Spray 4-F5-M-2-SP 6 9 10 11 12 13 14/11/22 16/11/22 16/11/22 16/11/22 16/11/22 16/11/22 K-SPLB-40 K-SPLB-40 K-SPLB-40 K-SPLB-40 K-SPLB-40 K-SPLB-40 Foam Water F500 Water F500 AVD 2 - 3 - 2 20 8.3 / Spray 10.3 / Spray 7.2 / Mist 16.4 / Spray 13.2/ Spray 3.0 / Spray 6-FO-E-2-SP 9-WA-M-0-SP 10-F5-H-3-MI 11-WA-E-0-SP 12-F5-H-2-SP 13-AV-L-20-SP 44 Test Code has been chosen with the following criterion: Test ID Num - Extinguishing Agent - Extinguisher Supplier - Solute Concentration (%) - Extinguisher Jet A typical cell temperature profile for test where cooling is obtained by spray jet extinguishing agent is reported in Figure 2. Rao H., Huang Z., Zhang H., Xiao S., 2015, Study of fire tests and fire safety measures on lithium-ion battery used in ships, The 3rd International Conference on Transportation Information and Safety, June 25 \u2013 28.", "mime": "application/pdf"}, {"id": "cet-13714", "words": "3794", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13714", "date": null, "keywords": "abuse; cells; ion; lithium; lto; nca; temperature", "summary": "Comparing the results reported for the different cells (Table 2), the CID-activation occurs at lower temperatures for NCA cell than for LFP cell and it is not detected for LTO cell. These results agree with the higher stability of LFP and LTO cells with respect to NCA cell.", "mime": "application/pdf"}, {"id": "cet-13715", "words": "3481", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13715", "date": null, "keywords": "dust; explosion; inerting; mineral; mixtures; nahco3; particle; psd", "summary": "Premix manufacturers blend cereals, vitamins, amino acids and mineral products to cover nutritional needs by managing complex formulations. Similar results were obtained by Jiang et al. (2018) when testing Al/NaHCO3 mixtures in the 20L sphere, suggesting that although the conditions of the standard 58 explosibility method estimate most traditional scenarios conservatively, it could lead to overestimating the inerting efficiency of a premix with mineral products and thus miscalculating the safety mitigation measures.", "mime": "application/pdf"}, {"id": "cet-13716", "words": "3718", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13716", "date": null, "keywords": "charge; discharge; dust; energy; generation; material; static", "summary": "Charge generation due to separation cannot be entirely prevented because the origin of charge lies in the physics and chemistry at the interface of materials (as a rule of thumb, the greater the energy, speed and pressure of contact, the greater will be the level of charge generation). 2.2 Charge accumulation Accumulation of electrostatic charge occurs when charge is added to an object at a rate faster than it can be discharged.", "mime": "application/pdf"}, {"id": "cet-13717", "words": "2930", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13717", "date": null, "keywords": "combustion; energy; figure; flame; ignition; mixture; propagation; turbulence", "summary": "Simulations were run by setting different preignition turbulence levels and ignition energies. All initial conditions of the simulation in terms of ignition energy (and associated hot core radius), turbulent kinetic energy, and turbulent kinetic energy dissipation rate are listed in Table 1.", "mime": "application/pdf"}, {"id": "cet-13718", "words": "3672", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13718", "date": null, "keywords": "dust; hybrid; mit; mixtures; oven; standard; temperature", "summary": "Dieter Gabel*, Joshua Huether Otto-von-Guericke University, Magdeburg, Germany gabel@ovgu.de The Nex-Hys Project, funded by the German Federal Ministry of Economy as part of the WIPANO frame program, aimed to develop standards for safety characteristics of hybrid mixtures. The setup- up generally proved to be able to test for the MIT of hybrid mixtures without violating existing values.", "mime": "application/pdf"}, {"id": "cet-13719", "words": "3271", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13719", "date": null, "keywords": "case; chamber; combustion; explosion; furnace; panels; pressure; relief; simulation; tubes", "summary": "The experimental testing of these explosions is challenging due to the complex design and large volume of combustion equipment, along with the presence of internal elements (heating tubes, burners, ignitors) and explosion relief panels. Moreover, these models may lack sensitivity to the presence of internal elements, which can induce turbulence and accelerate the flame, as well as the influence of explosion relief panels.", "mime": "application/pdf"}, {"id": "cet-13720", "words": "2731", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13720", "date": null, "keywords": "aluminium; combustion; flame; light; particles; propagation", "summary": "In this work, aluminium flame propagation inside a tube is studied. Experiments were conducted to study the phenomenon of combustion during aluminium flame propagation in a vertical tube.", "mime": "application/pdf"}, {"id": "cet-13721", "words": "2116", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13721", "date": null, "keywords": "bar; figure; oxygen; pressure; reactors; safety; temperature", "summary": "Autogenous Ignition temperature of acetonitrile under oxygen pressure] Test Overpressure It can be concluded that a safe operation of aerobic processes in acetonitrile under pure oxygen pressure of 100 bar is safe at temperature up to 150 \u00b0C.", "mime": "application/pdf"}, {"id": "cet-13722", "words": "3335", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-13722", "date": null, "keywords": "delay; dust; energy; ignition; spark; test; time", "summary": "Also, dust explosion is a very complex phenomenon (Eckhoff, 2003), which includes many subjects: dust lifting requires fluid-dynamic modelling of discontinuous media, dust ignition requires a proper combustion model, including every possible ignition source (which can be energy in form of heat, mechanical or electrical sparks), kinetics and turbulence, dust explosion require proper deflagration/detonation/deflagration to detonation model (Barozzi et al., 2020). Characterization of a spark discharge for dust cloud ignition.", "mime": "application/pdf"}, {"id": "cet-13723", "words": "3799", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13723", "date": null, "keywords": "dust; energy; experimental; ignition; influence; mie; model", "summary": "The material and energy balances included within this model were based on the following hypotheses: 1) dust particles has spherical symmetry; 2) resistance to mass transfer and diffusive versus convective flow in the gaseous phase are negligible; 3) secondary reactions between volatile compounds and pyrolysis products are absent; 4) there is local thermal equilibrium between solids and volatiles; 5) specific heat of the solid phase is constant and higher than specific heat of the gaseous phase; 6) air temperature in the influence zone (Tair) and the volume of the particles (Vt) are constant; 7) the state of the gaseous phase is pseudo-stationary. 104 Table 1: Dust ignition energy and equivalent spark diameters taken from the article by Bu et al. (2019)", "mime": "application/pdf"}, {"id": "cet-13724", "words": "3779", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13724", "date": null, "keywords": "bumper; contact; impact; roof; sealing; stiffness; system; tank", "summary": "Also, some elements are required for the functionality of the tank, such as flexible piping systems, edge vents, rain drainage system, roof supports, guide pipe, stilling pipe and floating roof sealing system. In this framework, the cylindrical liquid storage tank with floating roof is a common equipment vulnerable to earthquakes.", "mime": "application/pdf"}, {"id": "cet-13725", "words": "3602", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13725", "date": null, "keywords": "data; diameter; duration; fireball; hydrogen; lh2; models; sh2ift", "summary": "Moreover, it was demonstrated that conventional empirical correlations, initially developed for hydrocarbon fuels, underestimate both dimension and duration of hydrogen fireballs recorded during small-scale tests (Ustolin and Paltrinieri, 2020). The aim of this study is to obtain an analysis of hydrogen fireballs to provide new critical insights for consequence analysis.", "mime": "application/pdf"}, {"id": "cet-13726", "words": "3132", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13726", "date": null, "keywords": "biomethane; compression; dilution; gas; pressure; release; unit; ventilation; zone", "summary": "The paper is focused on biomethane compression unit and it illustrates a methodological approach aimed at decreasing the Atex zones hazardousness. The paper illustrates a methodological approach aimed at the optimization of the dilution degree of biomethane compression unit.", "mime": "application/pdf"}, {"id": "cet-13727", "words": "3842", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13727", "date": null, "keywords": "accident; damage; effects; event; fire; frequency; lpg; risk; scenarios", "summary": "Property damage Corrosion Hole in vessel wall Pool fire Loose flange Pipe leak Flash fire, Pool Fire, Jet fire Employees injured, Environmental damage Self-refrigeration Catastrophic vessel failure BLEVE Employees killed or injured, property damage Earthquake, Flood Pipe leak, Catastrophic vessel failure Flash fire, Pool Fire, Jet fire, BLEVE Employees killed or injured, Property damage, Environmental damage When selecting accident scenarios for land-use planning, in theory the user would initially derive a number of generic accident scenarios, based only on the substance (LPG) and the type of installation (e.g. pressurised, pipeline, loading/unloading, etc.). If it is not possible to calculate frequency of the critical event based on the fault tree analysis, there is the possibility to evaluate it through generic critical event frequencies.", "mime": "application/pdf"}, {"id": "cet-13728", "words": "2829", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13728", "date": null, "keywords": "area; community; figure; fires; forest; forest fires; map; orcompugio; picol; risk", "summary": "The information was collected based on historical forest fires and the analysis of meteorological variability in the previously delimited area, which allowed the development of maps of temperature, humidity, precipitation, and wind speed, as inputs on the modeling of possible forest fires in the area. For that reason, is necessary arises models for the risk of forest fires in areas with low response capacity and high level of poverty like San Ger\u00f3nimo district, specifically in the Andean community of Picol Orcopungio, because these wildfires can break out in there.", "mime": "application/pdf"}, {"id": "cet-13729", "words": "2963", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13729", "date": null, "keywords": "aria; causes; chemical; database; events; hazmat; severity; transportation", "summary": "140 3.1 Hazardous Phenomenon Figure 2 shows the distribution of HazMaT events by hazardous phenomenon, based on reports published in the ARIA database. Figure 3: Distribution of HazMaT events by period: ARIA database.", "mime": "application/pdf"}, {"id": "cet-13730", "words": "2738", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-13730", "date": null, "keywords": "analysis; container; events; goods; imo; operations; port; risk; substances; terminal", "summary": "Inherently, container operational risks are characterised by the multiplicity and dynamicity of influencing factors that affect the potential events (e.g., likelihood, consequences, and detectability) (Goerlandt and Montewka, 2015). Figure 1 shows diagram for container operations centred on the top event loss of containment due to different causes of collisions and container failures.", "mime": "application/pdf"}, {"id": "cet-13731", "words": "3815", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13731", "date": null, "keywords": "chemicals; conditions; equipment; ethanol; extraction; max; process; safety; solvent", "summary": "This preliminary work focuses on the development of safety indexes applied to the design of extraction processes of antioxidant and lipidic compounds from SCGs. Green extraction processes can be seen as an alternative to conventional solvent extraction, but may entail new threats that require further investigation, since the equivalence between green and safer must not be taken for granted.", "mime": "application/pdf"}, {"id": "cet-13732", "words": "3984", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13732", "date": null, "keywords": "accident; chemical; directive; equipment; event; inspection; loading; management; safety; seveso; system", "summary": "It should be remembered that accidents due to the accumulation of electrostatic charges during the transfer of fluids from small tanks of various types in unsuitable conditions (use of insulating materials, failure to connect electricity between the tanks, absent grounding, etc.) are possible events, even if not necessarily with such dramatic consequences as in the case described. It highlights the repercussions on the safety management system and the related lessons learned for technical evaluation and control activities, starting from the consideration that apparently minor events, originated by problems of an electrostatic nature during relatively simple plant operations, could give rise to major accidents.", "mime": "application/pdf"}, {"id": "cet-13733", "words": "3121", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13733", "date": null, "keywords": "accident; analysis; assessment; column; fraction; human; plant; process; risk", "summary": "Case study and methods Plant P&ID and procedures were recovered by combining several sources, including the well-known Mogford reconstruction (Mogford, 2005), the reconstruction carried out by the Chemical Safety Board (CSB, 2007), and different accident simulations (Khan and Amyotte, 2007; Manca and Brambilla, 2012). The human factors in risk analyses of process plants: The control room operator model \u2018TESEO.\u2019", "mime": "application/pdf"}, {"id": "cet-13734", "words": "3389", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13734", "date": null, "keywords": "accident; cloud; dust; explosion; figure; ignition; silos; storage; sugar; turbulence", "summary": "1.1 Particle shape and size Particle size and shape are crucial factors in dust explosions. 1.2 Moisture Water content of dust particles is an important factor in dust explosions.", "mime": "application/pdf"}, {"id": "cet-13735", "words": "3827", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13735", "date": null, "keywords": "domino; fire; firefighting; flux; heat; risk; tank", "summary": "Considering the wind direction from south to north, the heat fluxes (exemplary numbers) received by exposed tanks and the houses in the event of tank fires are listed in Table 1. Heat flux intensities (kW/m2) received by exposed tanks (Tj) and houses in the event of tank fire at Ti.", "mime": "application/pdf"}, {"id": "cet-13736", "words": "3137", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13736", "date": null, "keywords": "conductivity; dressing; eggplant; food; heating; mef; sauces; tomato; values", "summary": "All the samples had electrical conductivity values comprised between 1 and 5 S/m indicating that it is possible to apply ohmic heating to these types of samples. The values were comprised between 1.29 and 4.02 S/m. As expected, in line with other reports, electrical conductivity values increased with temperature.", "mime": "application/pdf"}, {"id": "cet-13737", "words": "4536", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13737", "date": null, "keywords": "acid; biopesticides; compounds; dryer; drying; journal; leaves; noni; oven; process; solar", "summary": "For biopesticides with a solvent ratio of 1:2 and the raw materials dried using a solar dryer obtained 47 grams of dried raw material waste. Biopesticides are obtained from the extraction of plants such as dried leaves, roots, stems, and fruits (Goncalves, 2021).", "mime": "application/pdf"}, {"id": "cet-13738", "words": "3974", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13738", "date": null, "keywords": "agitation; aspergillus; biomass; biosorption; black; dye; dyes; ebt; ebt dye; et al; niger; removal", "summary": "Percentage of EBT dye removal (A) and amount of EBT dye absorbed (B) as a function of pH and agitation speed. Table 2: Analysis of variance (ANOVA) for EBT dye removal and dye absorption (Qe) as a function of pH and agitation speed.", "mime": "application/pdf"}, {"id": "cet-13739", "words": "3750", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13739", "date": null, "keywords": "bittern; cases; concentration; mg(oh)2; mg2; naoh; solutions; suspension", "summary": "3. Results In this section, sedimentation trends and filtration times of produced Mg(OH)2 suspensions are discussed along with Mg2+ recoveries and Mg(OH)2 purity values. 3 3.1 Influence of bittern flow rate The influence of bittern flow rate on Mg(OH)2 suspension sedimentation and filterability properties was studied by increasing the bittern flow rate from 12 L/h (Cases #1) to 30 L/h (Cases #2).", "mime": "application/pdf"}, {"id": "cet-13740", "words": "2965", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13740", "date": null, "keywords": "air; anode; cathode; fuel; gac; mfc; output; performance; power", "summary": "Therefore, GAC is a viable replacement to solid material anode electrodes which is proposed to improve MFC performance since the anode surface area plays a crucial role in MFCs. Research has shown that utilizing electrogenic halophiles under super saline operating conditions can broaden the scope of industrial MFC applications and enhance MFC performance owing to the enreached electrolyte conductivity (Shrestha et al., 2018).", "mime": "application/pdf"}, {"id": "cet-13741", "words": "3228", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13741", "date": null, "keywords": "battery; control; energy; figure; hydrogen; power; system; variables", "summary": "However, it is essential to find efficient technological solutions for energy storage that respond quickly, safely and flexibly to the intermittent and fluctuating behavior of RES. ortizi@unican.es The urgent climate situation resulting from the indiscriminate consumption of fossil fuels together with the current geopolitical instability has prompted a series of policies in Europe to boost the energy transition through the large-scale installation of renewable energy sources (RES).", "mime": "application/pdf"}, {"id": "cet-13742", "words": "2627", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-13742", "date": null, "keywords": "analysis; carbon; climate; cost; decarbonization; energy; ghg; lcoc; model; project", "summary": "\u2022 Energy (heat, steam, electric energy) and fuel consumption and emissions. b. Climate impact criteria \u2022 Energy and fuel streams by type and origin.", "mime": "application/pdf"}, {"id": "cet-13743", "words": "3578", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13743", "date": null, "keywords": "canada; carbon; co2; emissions; energy; gas; hydrogen; methane", "summary": "Methane, a much more potent GHG than CO2, is the most significant single component of natural gas and, therefore, of these emissions. Many solutions have been developed to either trap or convert natural gas, mainly into hydrogen, instead of venting and flaring it.", "mime": "application/pdf"}, {"id": "cet-13744", "words": "3423", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13744", "date": null, "keywords": "hydrogen; moo; production; \ud835\udc46\ud835\udc56\ud835\udc5b", "summary": "To optimize hydrogen production, \ud835\udc4c\ud835\udc3b2 was defined as the amount of hydrogen production rate (\ud835\udc5e\ud835\udc54\ud835\udc4e\ud835\udc60,\ud835\udc3b2) over \ud835\udc46\ud835\udc56\ud835\udc5b, while \ud835\udc43\ud835\udc3b2 represents the ratio of \ud835\udc5e\ud835\udc54\ud835\udc4e\ud835\udc60,\ud835\udc3b2 to \ud835\udc49\ud835\udc59\ud835\udc56\ud835\udc5e, as follows. Hydrogen production by the hyperthermophilic bacterium Thermotoga maritima Part II: modeling and experimental approaches for hydrogen production.", "mime": "application/pdf"}, {"id": "cet-13745", "words": "3584", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13745", "date": null, "keywords": "alloy; electrode; energy; hydrogen; nifes; nws; potential; production", "summary": "Comparing NiFe NWs and NiFeS NWs, the ECSA of NiFeS NWs increases of 20% showing that the presence of sulfur increases the roughness of NWs and thus increases the catalytic properties of the electrode. In this work, we have modified these NWs adding sulfur (NiFeS NWs) and tested for HER.", "mime": "application/pdf"}, {"id": "cet-13746", "words": "3661", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13746", "date": null, "keywords": "fire; hrr; hydrogen; rupture; safety; tank; tprd; tunnel; vehicles", "summary": "The focus is on mitigation and prevention of hazards from blast wave and fireball following hydrogen tank rupture in a fire. The correlation was then validated against the unique experiments on the blast wave decay after hydrogen tank rupture in a real tunnel performed by CEA (Kudriakov et al., 2022) as shown in Figure 2b.", "mime": "application/pdf"}, {"id": "cet-13747", "words": "3716", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-13747", "date": null, "keywords": "cement; chemical; conditions; elastomers; hydrogen; materials; pressure; service; steel; storage; tests", "summary": "Regarding the production of hydrogen from renewable energy sources, the problem of hydrogen storage arises. There are different mechanisms of hydrogen damage (Figure 1 and Figure 2): \u2022 Hydrogen embrittlement (HE) or Hydrogen stress cracking (HSC): it happens when hydrogen and stress are simultaneously present in a susceptible material above a critical value.", "mime": "application/pdf"}, {"id": "cet-13748", "words": "4013", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13748", "date": null, "keywords": "cfd; cryogenic; hydrogen; ignition; jet; models; pressure; release; storage; temperature", "summary": "The similitude analysis was applied to build a correlation using available data from 78 experiments in the wide range of hydrogen storage pressure of 0.5- 65.0 MPa, temperature of 80-300 K and release diameter of 0.5-52.5 mm. The similarity law for hydrogen concentration decay in momentum-dominated jets is proven to be applicable to cryogenic hydrogen releases.", "mime": "application/pdf"}, {"id": "cet-13749", "words": "3799", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13749", "date": null, "keywords": "acrylate; flow; gas; hydrogen; methane; odorant; odorization; system", "summary": "Concerning hydrogen odorization system, previous work on the hydrogen odorization system in pure hydrogen and natural gas-hydrogen mixture systems was continued (Zanella et al. 2022). With the GASODOR S-FREE mixture, gas flows are less than 14 NL/min, as opposed to 65-95 NL/h with the tetrahydrothiophene (THT) odorant (Zanella et al. 2022).", "mime": "application/pdf"}, {"id": "cet-13750", "words": "3924", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13750", "date": null, "keywords": "distribution; effect; energy; gas; hydrogen; material; network; pipelines; pressure; sector; steel", "summary": "The use of carbon monoxide also demonstrates a positive impact in reducing HE intensity when mixed with H2 gas. A review of technical and regulatory limits for hydrogen blending in natural gas pipelines.", "mime": "application/pdf"}, {"id": "cet-13751", "words": "3722", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13751", "date": null, "keywords": "acid; base; concentration; current; density; edbm; feed; m-2; membrane; stack", "summary": "Results suggest that increasing the current density, the acid concentration rises at fixed base concentration of 1 mol l-1. This phenomenon could be due to the lower impact of the diffusive flux, towards the salt channel, with respect to the migrative flux of protons, generated in the inter-layer of the bipolar membrane, at higher current densities.", "mime": "application/pdf"}, {"id": "cet-13752", "words": "3857", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-13752", "date": null, "keywords": "bpy; ctf; ctfs; dcp", "summary": "Relative Pressure P/P0 SBPY-CTF=2260 m 2 g -1 0.0 0.2 0.4 0.6 0.8 1.0 0 300 600 900 1200 SDCP-CTF-Pt 2+=1460 m2g-1 SDCP-CTF-Pd 2+=1670 m2g-1 SDCP-CTF-Co 2+=1520 m2g-1 SDCP-CTF-Ni 2+=1540 m2g-1 SDCP-CTF-Cu 2+=1580 m2g-1 SDCP-CTF=2230 m 2 g -1 A d s o rb e d V o lu m e , S T P ( c m 3 g -1 ) Relative Pressure P/P0 0.0 0.2 0.4 0.6 0.8 1.0 0 250 500 750 1000 SBPY-CTF@Pt-MC=1100 m2g-1 SBPY-CTF@Pd-MC=990 m2g-1 SBPY-CTF@Co-MC=860 m2g-1 SBPY-CTF@Ni-MC=850 m2g-1 SBPY-CTF@Cu-MC=890 m2g-1 A d s o rb e d V o lu m e ,S T P ( c m 3 g -1 ) Reletive Pressure P/P0 SBPY-CTF=2260 m2g-1 0.0 0.2 0.4 0.6 0.8 1.0 0 250 500 750 1000 SDCP-CTF@Pt-MC=1700 m2g-1 SDCP-CTF@Pd-MC=1260 m2g-1 SDCP-CTF@Co-MC =1560 m2g-1 SDCP-CTF@Ni-MC=1340 m2g-1 SDCP-CTF@Cu-MC=1540 m2g-1 SDCP-CTF=2230 m2g-1 A d s o rb e d V o lu m e ,S T P ( c m 3 g -1 ) Relative Pressure P/P0 (a) (b) (c) (d) 0 2 4 6 8 10 0.00 0.43 0.86 1.29 1.72 2.15 P S D ( d V ( r) ) Pore Size (nm) DCP-CTF-Pd 2+ DCP-CTF-Co 2+ DCP-CTF-Ni 2+ DCP-CTF-Cu 2+ DCP-CTF DCP-CTF-Pt 2+ (c) (d) 0 2 4 6 8 10 0.00 0.28 0.56 0.84 1.12 Pore Size (nm) P S D ( d V ( r) ) BPY-CTF BPY-CTF-Cu 2+ BPY-CTF-Ni 2+ BPY-CTF-Co 2+ BPY-CTF-Pd 2+ BPY-CTF-Pt 2+ 0 2 4 6 8 10 0.00 0.28 0.56 0.84 1.12 P S D ( d V ( r) ) Pore Size (nm) DCP-CTF@Pt-MC DCP-CTF@Pd-MC DCP-CTF@Co-MC DCP-CTF@Ni-MC DCP-CTF@Cu-MC DCP-CTF 0 2 4 6 8 10 0.00 0.16 0.32 0.48 0.64 0.80 Pore Size (nm) P S D ( d V ( r) ) BPY-CTF@Pt-MC BPY-CTF@Pd-MC BPY-CTF@Co-MC BPY-CTF@Ni-MC BPY-CTF@Cu-MC BPY-CTF (a) (b) 81 Electrochemical measurements were performed in a three-electrode system, with a glassy carbon electrode, Ag/AgCl and a carbon rod used as the working electrode, reference electrode and counter electrode, respectively. Tafel slope of (b) BPY-CTF and BPY-CTF-M2+, and (e) DCP-CTF and DCP-CTF-M2+.", "mime": "application/pdf"}, {"id": "cet-13753", "words": "4099", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13753", "date": null, "keywords": "circuit; current; energy; g l-1; hydrogen; l-1; production; red; system; tests", "summary": "According to these results, very stable trends were observed, except (i) at low current densities in both ED and RED, where there is electrode activation, and (ii) at high current densities in ED, where there is a mass transport limit. 2.3 Continuous short-circuit RED tests The continuous RED tests were performed in three different scenarios having the same low concentrated solution (1 g L-1 NaCl) and different high concentrated solutions, to replicate the driving force resulting from the difference in concentration between river water and: (i) sea water, 35 g L-1 NaCl; (ii) Reverse osmosis brine, 70 g L-1 NaCl; (iii) post-treatment high concentrated brine, 300 g L-1 NaCl.", "mime": "application/pdf"}, {"id": "cet-13754", "words": "3498", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13754", "date": null, "keywords": "bed; figure; pressure; psa; purge; purity; syngas; trials", "summary": "Pressures were measured with transducers in the syngas storage receiver, PSA beds, and H2 Product Receiver. 3. Conclusions The use of an 8 m long PSA bed, proved to be a very effective method of magnifying the performance of the bed during the adsorption phase in the PSA Cycle.", "mime": "application/pdf"}, {"id": "cet-13755", "words": "3495", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13755", "date": null, "keywords": "case; cost; cracking; energy; hydrogen; methane; production; reactor", "summary": "Coupled hydrodynamic and kinetic model of liquid metal bubble reactor for hydrogen production by noncatalytic thermal decomposition of methane. International journal of hydrogen energy, Volume 46, pp.", "mime": "application/pdf"}, {"id": "cet-13756", "words": "4152", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13756", "date": null, "keywords": "cell; electrodes; electrodialysis; energy; hydrogen; number; production; system; water", "summary": "As the cell package increases in cell pairs (i.e. R increases), hydrogen production decreases and practically when R becomes higher than 50, overall hydrogen production is so low that it becomes a negligible dissipative effect for the system. In particular, they are the only ones that proposed this technology by coupling ED for the desalination of sodium sulphate (Na2SO4) solutions with hydrogen production.", "mime": "application/pdf"}, {"id": "cet-13757", "words": "3087", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13757", "date": null, "keywords": "embrittlement; energy; figure; gas; hydrogen; pressure; specimen; steel; tensile; test", "summary": "Figure 5c shows an optical micrograph of the crack propagation through the sample wall after being tested in hydrogen gas. Optical micrograph of the crack propagation through the sample wall after testing in hydrogen gas This research used a particular combination of specimen shape and testing method to study the HE on X65 carbon steel.", "mime": "application/pdf"}, {"id": "cet-13758", "words": "3642", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13758", "date": null, "keywords": "detection; function; gas; hydrogen; leak; pressure; refueling; release; sensors; tank", "summary": "Ultrasonic hydrogen gas detectors The detection of hydrogen releases in open, well-ventilated areas is challenging. In this perspective, hydrogen gas sensors are fundamental to detect leakages before the ignition, which can result in fires or explosions.", "mime": "application/pdf"}, {"id": "cet-13759", "words": "3430", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13759", "date": null, "keywords": "evaluation; ferritic; gas; hydrogen; learning; material; network; pipeline; steels; transport", "summary": "This study aims at bridging the gap between safety and material science, as it can optimize predictive maintenance of hydrogen pipelines, thus promoting the widespread utilization of hydrogen in the forthcoming years. In contrast, X42 and X120 are the most suitable low-alloy steels for hydrogen pipelines since none of the tests in the dataset has a U label.", "mime": "application/pdf"}, {"id": "cet-13760", "words": "3500", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13760", "date": null, "keywords": "analysis; database; development; energy; events; factors; hrss; hydrogen; information; protocol; risk; safety", "summary": "The MORT methodology for event analysis dates back to 1973. The MORT methodology was considered to be a synthesis of the best safety elements and concepts for event analysis (Solano and Isasia, 2017).", "mime": "application/pdf"}, {"id": "cet-13761", "words": "4388", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13761", "date": null, "keywords": "cgs; co2; concept; energy; geothermal; hydrogen; production; storage; synergy; wind", "summary": "A huge capacity for energy storage; lower cost; safety due to the absence of contact of H2 with oxygen. However, the main idea of H2 energy is seasonal-based energy storage application, or using excess energy/electricity, which is impossible to save or permanently store now.", "mime": "application/pdf"}, {"id": "cet-13762", "words": "2908", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13762", "date": null, "keywords": "hfss; hydrogen; perception; production; public; risk; storage; transportation", "summary": "Investigation of public risk perception This section introduces the cross-country survey conducted to collect the public risk perception towards HFSs, and the statistical results of the survey. A total of 2,500 participants from the three countries completed the web-based questionnaires, evaluating their level of perceived risk towards HFSs in terms of risk probability and consequence.", "mime": "application/pdf"}, {"id": "cet-13763", "words": "3390", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13763", "date": null, "keywords": "adsorption; capacity; co2; materials; mofs; range; screening; separation", "summary": "Then, by comparing the optimal conditions required for CO2 capture in industrial simulation and combining with the relevant screening experience in molecular simulation, 11 MOF materials suitable for industrial level 4 separation and 14 MOF materials suitable for level 6 separation were obtained in accordance with the conditions of CO2 adsorption capacity, selectivity and N2 adsorption capacity. Result 3.1 GCMC large-scale screening of the first step After the first step GCMC calculation of 4188 MOFs, the adsorption properties were obtained and the three most important adsorption properties were focused on, i.e.: CO2 / N2 selectivity (Si/j ads); CO2 adsorption capacity (Ni ads);N2 adsorption capacity (Nj ads).", "mime": "application/pdf"}, {"id": "cet-13764", "words": "3590", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-13764", "date": null, "keywords": "absorption; capture; carbon; carbon capture; co2; flue; gas; plant; solution; system", "summary": "One of the most comprehensive models, with a good fit with Carbon Capture plant operation, is the one described in the paper by Zhang (Zhang et al., 2011) and uses electrolyte-NRTL activity coefficients for liquid phases properties definition, while PC-SAFT equation of state is deployed for vapor phase. Emission Source CO2 Content (vol%) Power Generation Coal to power 12-15 NG to power 3-10 Oil to power 3-8 Bioenergy 3-8 Large Emitters Cement production 14-33 Iron and Steel 15 Refineries (excluding H2 e NH3) 3-13 Ethylene production 12 Waste Combustion 20 High Purity Sources NH3 production 100 H2 production 70-90 NG production 5-70% Biomass fermentation 100 Case Study 1 \u2013 Steam Reformer The currently most widespread application of post combustion Carbon Capture systems to Steam Reformers is within Ammonia plants, especially when they are integrated with a downstream Urea production plant.", "mime": "application/pdf"}, {"id": "cet-13765", "words": "3717", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13765", "date": null, "keywords": "absorption; co2; gas; pressure; rate; reaction; reactor; solvent", "summary": "However, the promotive effect was relatively mild and does not indicate improvements in absorption rate compared to unpromoted K2CO3 (Thee et al. 2012a). However, McCann et al. (2015) showed that over the relevant pH (8.5-10.5) and temperature (up to 84 \u02daC) ranges for CO2 absorption, instead of forming vanadium oligomers, VO tends to form carbonato-vanadate complexes: H2VO4 2-+CO3 2-+H+\u21ccHVO4CO2 2-+H2O (4) H2VO4 2-+2CO3 2-+2H+\u21ccVO4(CO2)2 3-+2H2O (5)", "mime": "application/pdf"}, {"id": "cet-13766", "words": "2953", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13766", "date": null, "keywords": "acid; chemical; dec; degradation; nacl; presence", "summary": "DEC degradation has been calculated according to equation 2. However, no data about its interference with DEC degradation was available (Giram et al., 2018).", "mime": "application/pdf"}, {"id": "cet-13767", "words": "3410", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13767", "date": null, "keywords": "baltic; blidene; ccus; co2; emissions; latvia; onshore; storage", "summary": "In 2021 three countries produced about 15.9 Mt of large CO2 emissions, including more than 2.2 Mt of bio-CO2 emissions, located not far from the existing gas pipelines, which could connect emitters with storage sites and ports. The regulatory process to permit CO2 storage in Latvia has been started, initiated by Latvian largest CO2 producers.", "mime": "application/pdf"}, {"id": "cet-13768", "words": "3636", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13768", "date": null, "keywords": "carbon; ccu; co2; cost; electricity; meoh; plant", "summary": "The electric energy demand of ELs, ASU, CCU, and CO2 capture plant can be fulfilled also via backup grid electricity [#P2grid, #P3grid, #P6grid, and #P7grid, respectively], while any excess renewable electricity can be exported to the grid [#P4]. (b) CO2 balance of optimal CCS and CCU plants, compared with reference cement plant and MeOH plant (i.e., Base) (P\u00e9rez-Fortes et al., 2016).", "mime": "application/pdf"}, {"id": "cet-13769", "words": "3156", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13769", "date": null, "keywords": "aspen; co2; data; figure; hs3; model; solvent; stripper; validation", "summary": "Table 1: Summary of assigned and compared variables for HS3 Aspen PLUS model validation. The authors are grateful to Olaf Trygve Berglihn (SINTEF) and to Prof. Stefania Moioli (Politecnico di Milano) for their support on the set-up of the model validation procedure and useful discussion on thermodynamics and model development.", "mime": "application/pdf"}, {"id": "cet-13770", "words": "2606", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13770", "date": null, "keywords": "adsorption; bifermentans; consortium; order; pb(ii; pseudo", "summary": "Figure 6: FTIR spectra of P. bifermentans P-1. Study shows that the identities of the precipitates vary for each microbial strain, as PbS and \ud835\udc43\ud835\udc4f0 were the main species precipitated by P. bifermentans and PbO with either PbCl or \ud835\udc43\ud835\udc4f3(\ud835\udc43\ud835\udc424)2 precipitated by K. pneumoniae.", "mime": "application/pdf"}, {"id": "cet-13771", "words": "3350", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-13771", "date": null, "keywords": "biomethanation; ch4; objective; optimization; process; \ud835\udc36\ud835\udc3b4; \ud835\udc3a\ud835\udc4e\ud835\udc56\ud835\udc5b; \ud835\udc43\ud835\udc5f\ud835\udc5c\ud835\udc53\ud835\udc56\ud835\udc61; \ud835\udc43\ud835\udc5f\ud835\udc5c\ud835\udc53\ud835\udc56\ud835\udc61 \ud835\udc5a\ud835\udc4e\ud835\udc5f\ud835\udc54\ud835\udc56\ud835\udc5b", "summary": "Economic MPC (EMPC) has recently been proposed incorporating a general cost function or performance index in its formulation to consider economic criteria in process optimization (Ellis et al., 2017). Multi-objective optimization of methane production system from biomass through anaerobic digestion.", "mime": "application/pdf"}, {"id": "cet-13772", "words": "3498", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-13772", "date": null, "keywords": "air; bio; biomass; energy; figure; gasification; glycerol; heat; waste; water", "summary": "This work shows that the gasification of biomass with high water content is possible. At 800K, peak hydrogen for C3H8O3 and 50/50 water/ C3H8O3 202 Figure 4a) \u00d8 for peak CO v % water content in mixture for 800K air temperature Figure 4b)", "mime": "application/pdf"}, {"id": "cet-13773", "words": "3898", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13773", "date": null, "keywords": "acid; biomass; catalyst; fatty; hydroxy; microalgae; reaction; water", "summary": "This procedure represents a high-innovative application of microalgal biomass and allows the simultaneous exploitation of FAs and carbohydrates. This may result in an increase in the commercial value of microalgal biomass.", "mime": "application/pdf"}, {"id": "cet-13774", "words": "3240", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13774", "date": null, "keywords": "air; biomass; distillery; draff; figure; gasification; mass; ratio; sample; stage", "summary": "As at the time of carrying out this work, no known investigation has been carried out on the gasification of distillery draff. The relatively high percentage of oxygen in distillery draff (compared to the biomass residues previously investigated by Andrews 213 et al. (2019)) is due to the presence of ethanol and other organic compounds in draff.", "mime": "application/pdf"}, {"id": "cet-13775", "words": "3523", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13775", "date": null, "keywords": "composition; effect; energy; feedstock; gas; production", "summary": "This explains the higher H2 composition at higher inorganic content. The figure indicates that at lower temperature, higher inorganic contents are associated with lower gas yields.", "mime": "application/pdf"}, {"id": "cet-13776", "words": "4033", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13776", "date": null, "keywords": "carbon; catalysts; chain; co2; distribution; fischer; synthesis; tropsch", "summary": "Fischer Tropsch synthesis (FTS) represents one of the main processes in the hydrocarbons production 223 field. Multifunctional heterogeneous catalysts for the tandem CO2hydrogenation- Fischer Tropsch synthesis of gasoline.", "mime": "application/pdf"}, {"id": "cet-13777", "words": "3931", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13777", "date": null, "keywords": "cleaning; consumption; cultivation; cycle; data; kgdw; life; pbr; plant; water", "summary": "The minimum and maximum values of water consumption from Herrera et al. (2021) fall in the medium-high range, but they considered also a wastewater scenario, whose actual minimum consumption of freshwater or seawater is zero. Paddlewheel (~31 kg kg\u20131), LEDs (1.1-15.4 kg kg\u20131), PVC for electrocoagulation chamber (0.3 kg kg\u20131), and PMMA for reactor vessel (0.3 kg kg\u20131) dominated the construction materials in the ORP, indoor PBRs, TLC and VSt, respectively; water consumption was in the range 23-590 kg kg\u20131, most for cultivation or cleaning in the open or closed systems, respectively; nitrate and phosphate were 100 and 10 g kg\u20131, respectively; chemicals were ~10-30 g kg\u20131; electricity was ~11-85 kWh kg\u2013 1, while heat for enzymatic hydrolysis was negligible.", "mime": "application/pdf"}, {"id": "cet-13778", "words": "2887", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13778", "date": null, "keywords": "additives; ball; load; oil; sulfur; vegetable; wear; weld", "summary": "The current phase of the research is aimed to examine the range of sulfur donors that can be used for the production of sulfurized vegetable oil additives based on literature data and to compare them based on properties that have key importance for the synthesis of EP additives. Frank L.E., Phillip S.L., Robert E.A., 1979, Vegetable oil derivatives as lubricant additives.", "mime": "application/pdf"}, {"id": "cet-13779", "words": "4284", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13779", "date": null, "keywords": "average; combustion; emission; factors; load; stoves; wood", "summary": "Figure 2: New stove emission factor in g/kg dry fuel compared to an average emission factor for the whole fleet of new wood stoves (from 1998), illustrated for PM10 and CO 5. Emission factors are used when assessing the sustainability of technologies and processes where emissions are created in different steps through value chains.", "mime": "application/pdf"}, {"id": "cet-13780", "words": "3082", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13780", "date": null, "keywords": "biomass; data; equilibrium; gasification; model; oxidation; reactor; zone", "summary": "As a result, they provide more accurate results with respect with equilibrium models (Bove et al. 2016, Marchelli et al. 2019), highly specific for a determined reactor and type of biomass. The advantage of using an ANN is that it does not require a mathematical description of the physical phenomenon, permits to obtain a higher level of accuracy with the same number of inputs as in equilibrium models, and presents good performances especially in case of non-linearities in the output (Elman, 2020).", "mime": "application/pdf"}, {"id": "cet-13781", "words": "3204", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13781", "date": null, "keywords": "brine; concentration; crystallization; evaporation; figure; phreeqc; tests", "summary": "Figure 2: Comparison of major cations (A) and anions (B) concentration for Real Brine evaporation at 40 and 120 \u00b0C. Figure 3: Comparison of major cations (A) and anions (B) concentration for Artificial Brine evaporation with and without the addition of 1.2 mg/l of antiscalant.", "mime": "application/pdf"}, {"id": "cet-13782", "words": "3503", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13782", "date": null, "keywords": "agents; co2; emissions; gas; ghg; nox; process; reduction; urea", "summary": "Figure 3: CO2 emission sources for a blast furnace and BOF steel production process (Global CCS Institute, 2015). It is well known that the production process of urea, as well as the further thermal decomposition of the same into CO2 and NH3 occurring in the SCR flue gas system, have a 259 significant contribution to GHG emissions.", "mime": "application/pdf"}, {"id": "cet-13783", "words": "3351", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13783", "date": null, "keywords": "cfd; flow; mixing; number; power; stirrer; torque", "summary": "This study utilizes CFD simulations with OpenFOAM\u00ae to predict the power number of various stirring devices in a lab-scale reactor. Ding et al. (2010) performed a study with CFD simulations to investigate the impact of impeller type and speed on flow patterns in a gas-liquid two-phase flow CSTR for biohydrogen production.", "mime": "application/pdf"}, {"id": "cet-13784", "words": "3760", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13784", "date": null, "keywords": "biocarbon; et al; heating; ignition; sample; self; storage; temperature", "summary": "The main objective of this review is to survey studies on the self-ignition of biocarbons by correlating them to biocarbon production and storage conditions and provide background information for safe transportation and storage of biocarbon. Temperature history of biocarbon samples during self-heating test 273 As shown in Figure 2, the temperature measured from the sample IBP1 increases sharply, continuously to a value over 200\u00b0C, indicating temperature runaway and self-ignition of the sample under the tested condition(Riva et al. 2020).", "mime": "application/pdf"}, {"id": "cet-13785", "words": "4094", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13785", "date": null, "keywords": "biocarbon; biomass; biomasses; elements; et al; leaching; materials; water; woody", "summary": "The properties of leached biomass materials should be characterized, which can be used for predicting the yield and quality of the produced biocarbon. Demineralization is a process widely used for pretreatment of biomass materials that are rich in or contaminated with inorganic elements.", "mime": "application/pdf"}, {"id": "cet-13786", "words": "3906", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13786", "date": null, "keywords": "combustion; energy; gas; gasification; kinetic; sewage; sludge", "summary": "The hot effluent is then used to further increase electric power production by generating steam at 60 bar, 300\u00b0C to be used in a Rankine cycle working at the same conditions as the one modeled for sewage sludge combustion. Thermal conversion of sewage sludge in waste-to-energy systems allows to add value to this waste by exploiting its energy content and significantly reducing the amount of final waste to be disposed in landfill, but these processes must be modeled in detail to obtain reliable results.", "mime": "application/pdf"}, {"id": "cet-13787", "words": "3190", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13787", "date": null, "keywords": "biogas; blades; figure; fluid; production; rate; shear; velocity; vessel", "summary": "As pointed out in many recent investigations, biogas production in wet digesters can be significantly affected by the agitation mode (Singh et al., 2019), which in turn depends on the interplay of geometrical, physical and operating variables. Considering previous results on the effect of agitation on biogas production (Lebranchu et al., 2017), significant improvement might be expected in the production process by a different choice of agitation system, at least in the case of the digestate considered in this work, for the following reasons: \u2212 the calculated dead zones in the vessel exceed the 90%.", "mime": "application/pdf"}, {"id": "cet-13788", "words": "3794", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-13788", "date": null, "keywords": "co2; cut; fore; increase; sustainability; wastewater", "summary": "The following indicators were studied: the profit of a batch (P), specific energy demand (SED), specific CO2 emission (CO2,s) resulting from incineration and the generation of heating steam, specific wastewater generation (mws) and specific potential environmental impacts (PEIs) determined by the WAR algorithm. Based on the effects of the parameters, a new operational policy is proposed that has both a higher profit (by 60%) and lower environmental impacts (73% lower specific CO2 emission) compared to the base case.", "mime": "application/pdf"}, {"id": "cet-13789", "words": "2975", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13789", "date": null, "keywords": "analysis; approach; assessment; data; engineering; glucose; processes; step", "summary": "By leveraging these technologies, environmental assessment tools like Life Cycle Assessment (LCA) can effectively analyze process data and assessment outcomes. The following paragraphs will focus on the data enrichment and data processing steps.", "mime": "application/pdf"}, {"id": "cet-13790", "words": "4084", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-13790", "date": null, "keywords": "coffee; css; grinding; particle; pause; rpm; size; time", "summary": "This study highlights the potential of planetary ball mills for grinding organic materials, reducing grinding times and costs while improving the efficiency of waste utilization for subsequent industrial applications. Grinding time (min) 5 10 15 Rotation speed (rpm) 350 400 450 Pause time (I[s]/PT[s]) (PT added to grinding time)", "mime": "application/pdf"}, {"id": "cet-13791", "words": "3502", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13791", "date": null, "keywords": "bio; configuration; crude; energy; heating; htl; reactor; sludge", "summary": "Figure 3: Comparison of temperature vs. pressure profile between blank test and sludge test, configuration C. 3.2 Effect of reactor configuration on product distribution HTL tests at different reactor configurations were performed to assess their effect on the bio-oil and co-product yields. Then, municipal sludge was subjected to the HTL process to study the effect of different reactor configurations (different heating ramps) on the distribution of products and, in particular, on the bio-crude yield.", "mime": "application/pdf"}, {"id": "cet-13792", "words": "3592", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13792", "date": null, "keywords": "catalyst; fdca; ffca; figure; hmf; oxidation; rate; reaction; solution", "summary": "Figure 3: Temperature effect on HMF oxidation reaction using LMNO catalyst: (a) HMF conversion (b) yield and selectivity. A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: David Bogle, Flavio Manenti, Piero Salatino Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 979-12-81206-04-5; ISSN 2283-9216 Kinetics of Catalytic Oxidation of Hydroxymethylfurfural to 2,5- Furandicarboxylic Acid over LaMn1-xNixO3-d Perovskite Oxide Piyachat Wattanachaia, Soipatta Soisuwana,b, Patiparn Boonruama,b, Joongjai Panpranotc, Pinit Kidkhunthodd, Settakorn Upasena,b aDepartment of Chemical Engineering, Engineering Faculty, Burapha University, Chonburi, Thailand bResearch Unit of Developing Technology and Innovation of Alternative Energy for Industries, Burapha University, Chonburi, Thailand cCenter of Excellence on Catalysis and Catalytic Reaction Engineering, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, 10330, Thailand dSynchrotron Light Research Institute (Public Organization), Nakhon Ratchasima, 30000, Thailand settakorn@eng.buu.ac.th This present research aims at studying the kinetic reaction of HMF oxidation which is influenced by temperature gradient and Mn/Ni cation ratio in a lanthanum-based perovskite oxide catalyst.", "mime": "application/pdf"}, {"id": "cet-13793", "words": "3505", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13793", "date": null, "keywords": "chemical; cost; facilities; material; upcycling; waste", "summary": "The location of the waste sources as well as the amount of waste material collected are variable over time especially in the construction industry, making the process of locating different elements of the supply chain difficult. Moreover, the composition and the quality of waste is unpredictable, requiring the development of technologies that can handle different grades of waste material.", "mime": "application/pdf"}, {"id": "cet-13794", "words": "3984", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13794", "date": null, "keywords": "biorefinery; coffee; compounds; energy; et al; extraction; grounds; process; production; scg; value; waste", "summary": "Biodiesel from SCG was obtained by a two-step transesterification process, ultrasound-assisted process (Valderez et al., 2014) in situ extraction, and transesterification with supercritical methanol (Calixto et al., 2011). SCG To ta l p o ly p h en o ls ( m g C A E/ g) 334 4.3 Effects of DES pre-treatment Table 2 shows the results of SCG treatment with two different compositions of DES made by citric acid (CA) as hydrogen bond acceptor and choline chloride (ChCl) as hydrogen bond donor.", "mime": "application/pdf"}, {"id": "cet-13795", "words": "3476", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13795", "date": null, "keywords": "anaerobic; biogas; co2; digestate; digestion; growth; upgrading; vulgaris; waste; \u00b5mol", "summary": "The benefits of biogas upgrading are numerous. In this study, Chlorella vulgaris was used both for biogas upgrading and for reducing the polluting impact of digestate from anaerobic digestion of organic fraction of municipal solid waste (OFMSW) due to its easy cultivation in various environments, even raw wastewater, and significant lipid content.", "mime": "application/pdf"}, {"id": "cet-13796", "words": "3871", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13796", "date": null, "keywords": "afterburner; coffee; energy; extraction; heat; plant; scale; silverskin; study; water", "summary": "Silverskin extraction yield and Total phenolic content Table 3: Extraction yield (g dry extract/g raw material) TPC (mg GAE/g raw material)", "mime": "application/pdf"}, {"id": "cet-13797", "words": "2382", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-13797", "date": null, "keywords": "carbon; dose; drug; footprint; inhalers; pmdis", "summary": "Table 1: Pressurized metered dose inhalers (pMDIs) studied. Table 2: Pressurized metered dose inhalers (pMDIs) studied Product code Initial mass", "mime": "application/pdf"}, {"id": "cet-13798", "words": "3637", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13798", "date": null, "keywords": "adsorption; brix; colour; decolourization; dilution; starch; sugar; time", "summary": "Figure 1: Decolourization over time with different sugar content for AC dosages of 0.6 g / 100 ml in (a) and different AC dosages with dilutions to 30 Brix in (b) 0 10 20 30 40 50 60 70 80 90 100 76% 80% 84% 88% 92% 96% C ol ou r R em ov ed Time / min 16 Brix 20 Brix 30 Brix 40 Brix 0 10 20 30 40 50 60 70 80 90 100 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% C ol ou r R em ov ed Time / min 0.1 g AC / 100 ml 0.3 g AC / 100 ml 0.6 g AC / 100 ml 0.8 g AC / 100 ml (a) (b) 357 Table 1: Equilibrium time for several dilutions and AC dosages Dilution Equilibrium time / min Colour removed at equilibrium AC dosage / g/100ml Equilibrium time / min Colour removed at equilibrium 16 Brix 10 92 % 0.1 60 69 % 20 Brix 20 93 % 0.3 30 82 % 30 Brix 30 87 % 0.6 30 87 % 40 Brix 60 92 % 0.8 5 94 % 3.2 Decolourization Obtained curves for decolourization with different AC dosages show only a slight difference between different dilutions, as presented in Figure 2. Freundlich isotherm in (b) Table 3: Langmuir and Freundlich parameters Dilution Langmuir Freundlich \ud835\udc5e\ud835\udc5e\ud835\udc5a\ud835\udc5a\ud835\udc5a\ud835\udc5a\ud835\udc5a\ud835\udc5a / IU\u00b7g-1 \ud835\udc3e\ud835\udc3e\ud835\udc3f\ud835\udc3f / IU-1 R2 \ud835\udc3e\ud835\udc3e\ud835\udc53\ud835\udc53 / g-1 \ud835\udc5f\ud835\udc5f\ud835\udc53\ud835\udc53 R2 16 Brix -2821 -3.62\u00b710-23 0.9783 2.754 1.391 0.9590 20 Brix -2849 -3.52\u00b710-03 0.9829 1.877 1.467 0.9729 30 Brix -14122 -5.93\u00b710-04 0.9873 7.608 1.038 0.9851 40 Brix -35404 -3.06\u00b710-04 0.9979 9.611 1.034 0.9978 4. Conclusions Decolourization by AC adsorption proved to be a highly suitable method.", "mime": "application/pdf"}, {"id": "cet-13799", "words": "3492", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-13799", "date": null, "keywords": "control; et al; industry; manufacturing; metrics; pat; pharmaceutical; process; product; quality", "summary": "Review Methods A keyword search of the following was carried out on the Scopus and Elsevier databases: Sustainable Pharmaceutical Manufacturing (SPM), process intensification, green metrics, continuous biomanufacturing (CBM), digitalization & I4.0, batch-to-continuous process operation, DT lifecycle, model-assisted design of experiments (DoE), advanced process control, process monitoring & control. DTs show great promise in translating complex data sets into robust process knowledge, enabling consistent product quality with variable process input parameters, transferring nonlinear bioprocesses into dynamic models, and combining advanced process control and green metrics.", "mime": "application/pdf"}, {"id": "cet-13800", "words": "3994", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-13800", "date": null, "keywords": "ared; concentration; cost; plant; pressure; pws; stream; treatment; unit; water", "summary": "Produced water treatment technologies. A make-up stream of process water (stream 8) is inserted before the ARED to close the mass balance of the diluted circuit.", "mime": "application/pdf"}, {"id": "cet-13801", "words": "3912", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13801", "date": null, "keywords": "energy; pla; printing; speed; temperature", "summary": "The mechanical properties and printing accuracy did not appear to be severely impacted by an increase in printing speed from 70 to 130 mm/s at least for simple geometries and small sample sizes. In this work, commercially available filaments made from neat and wood filled polylactide were extruded in a 3D printer in different operating conditions (i.e., by changing printing speed and nozzle temperature).", "mime": "application/pdf"}, {"id": "cet-13802", "words": "4006", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-13802", "date": null, "keywords": "chain; dairy; milk; optimization; production; products; supply; supply chain; uncertainty", "summary": "One of the most effective ways to solve these problems is by formulating and solving optimization models of dairy supply chains in the presence of uncertainties regarding their parameters. Stefansdottir and Grunow (2018) have proposed a two-stage stochastic mixed integer linear programming model for determination of both, product designs and processing technologies of dairy supply chain under uncertain product demands consideration.", "mime": "application/pdf"}, {"id": "cet-13803", "words": "4480", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-13803", "date": null, "keywords": "costs; dairies; dairy; markets; milk; production; products; suppliers; uncertainty", "summary": "The milk fat content of the raw materials is included as a decision variable in both the models of dairy products production, as well as in a model of the SC environmental impact. The approach involves four models for the production of dairy products; the SC design, the SC environmental and social impact.", "mime": "application/pdf"}, {"id": "cet-13804", "words": "3479", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13804", "date": null, "keywords": "16s; bacteria; barrier; concentration; cr(vi; mg\uf0d7l-1; reactor; sludge; water", "summary": "Figure 4: Simulation and optimization of influent and effluent Cr(VI) in the biological barrier The developed model predicted the Cr(VI) effluent well under various Cr(VI) influent concentration loadings (40\u2013 60 mg\uf0d7L-1) with 99.6% confidence. The model modification may result in a proper application in engineered biological systems for the treatment of groundwater with higher Cr(VI) concentrations and multiple toxic contaminants.", "mime": "application/pdf"}, {"id": "cet-13805", "words": "3057", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-13805", "date": null, "keywords": "concentration; direction; peak; speed; street; time; vehicle; wind", "summary": "Conclusions Preliminary tests carried out in a low traffic narrow and deep street canyon showed the potentiality of RS technique for the identification of high emitter vehicles measuring FP concentrations with a CPC. Transportation Research Part D: Transport and Environment, 68, 122-136 Murena and M.V. Prati \u201cThe contribution of high emitters vehicles to FPs number concentration in the historical center of Naples\u201d 12th International Conference on Air Quality \u2013 Science and Application Thessaloniki, 9-13 March 2020 Murena F. Sustainable Development of the Historic Centre of Naples: The Impact of Vehicular Traffic and Food Service Business on Air Quality.", "mime": "application/pdf"}, {"id": "cet-13806", "words": "3008", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-13806", "date": null, "keywords": "cadmium; carbon; microorganisms; mountain; ppm; soil; treatments", "summary": "It is observed that there is a significant difference between the treatments with activated carbon; however, treatment 1, which was the control group compared to treatment 4, improved soil parameters as well as higher cadmium removal. Table 2: Analysis of physicochemical parameters of soil without treatment The physicochemical study was carried out on a soil sample with activated carbon treatment of Cocos nucifera at different concentrations, it is observed that T4 (CA: 300 g) improved the parameters of phosphorus 9.95 ppm, nitrogen 2.78%, potassium 48.4 ppm, cation exchange capacity 21.8 Meq/100g, pH 7.33, magnesium 2.8 Meq/100g, organic matter 2.28% and the cadmium level decreased to 1.2 ppm.", "mime": "application/pdf"}, {"id": "cet-13807", "words": "3008", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13807", "date": null, "keywords": "days; metals; microorganisms; mountain; quality; wastewater; water", "summary": "One technique to remove metals is the use of chemical solutions and microorganisms in order to meet water quality standards for the environment (Ang and Mohammad, 2020, Xue et al., 2021). Bioremediation is a method to stabilize organic and inorganic compounds and improve water quality, through different physical and biochemical mechanisms (Ayme et al., 2022, Tejeda et al, 2022).", "mime": "application/pdf"}, {"id": "cet-13808", "words": "2842", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-13808", "date": null, "keywords": "ejector; fluid; geometry; nozzle; r290; refrigerants; temperature", "summary": "The research broadens the application potential of ejector systems by showing its adaptability to various systems and refrigerants. Roman R., Hernandez J. I., 2011, Performance of ejector cooling systems using low ecological impact refrigerants, International Journal of Refrigeration, 34, 7, p. 1707-1716, 420 19fingas.pdf Performance Analysis of the R290 Variable Geometry Gas Ejector Application for Other Refrigerants", "mime": "application/pdf"}, {"id": "cet-13809", "words": "3724", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-13809", "date": null, "keywords": "decanter; dsm; electricity; optimization; oversizing; process; state; \ud835\udc39\ud835\udc5c\ud835\udc60", "summary": "Figure 2: Simplified flowsheet of decanter centrifuge process under consideration. The main results show that in terms of oversizing processes for DSM purposes, a lower value of 100 % was found using dynamic optimization compared to 209.8 % using steady-state optimization.", "mime": "application/pdf"}, {"id": "cet-13810", "words": "2335", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-13810", "date": null, "keywords": "applications; cement; drilling; energy; geothermal; temperature", "summary": "In high enthalpy geothermal applications, muds become thinner and more unstable. To withstand high temperatures, no elastomeric seals and heat-sensitive parts can be used near the bit.", "mime": "application/pdf"}, {"id": "cet-13811", "words": "3411", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13811", "date": null, "keywords": "cell; electrode; ion; material; phase; pouch; process; production; scale; water", "summary": "Before evaluating the performance of pouch cells, the minimum amount of electrolyte required to have a stable and comparable cell behaviour was evaluated. Furthermore, a water-based manufacturing process to produce LiFePO4 electrodes was described.", "mime": "application/pdf"}, {"id": "cet-13812", "words": "3297", "extension": ".pdf", "flesch": "28", "author": null, "title": "cet-13812", "date": null, "keywords": "analysis; approach; development; dimension; energy; framework; hrfss; hydrogen; risk; safety; sustainability", "summary": "Tasks within this dimension include the identification of the hydrogen system structures, the development of potential scenarios for hazardous uncontrolled hydrogen releases, risk analysis in the operation of hydrogen systems, and the determination of the extent of hazardous zones close to key hydrogen system components. This approach aims to enhance the feasibility of this innovative solution, thereby making hydrogen energy both sustainable and clean.", "mime": "application/pdf"}, {"id": "cet-13813", "words": "4022", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-13813", "date": null, "keywords": "battery; diy; electricity; energy; olive; photovoltaic; system; work", "summary": "Mohebi P., Roshandel R. 2023, Optimal design and operation of solar energy system with heat storage for agricultural greenhouse heating, Energy Conversion and Management: X. Nacer T., Hamidat A., Nadjemi O., Bey M., 2016, Feasibility study of grid connected photovoltaic system in family farms for electricity generation in rural areas, Renewable Energy,96 Part A, 305-318. Before introducing PV system, the farmer could harvest in ideal conditions (i.e., trees full of olives and not far from each other) about 100 kg of olives in one hour.", "mime": "application/pdf"}, {"id": "cet-13814", "words": "2945", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13814", "date": null, "keywords": "case; chemical; distillation; emissions; model; modelling; study; surrogate", "summary": "OPEX comparison between surrogate model and simulation data Finally, for the Butane-Pentane column, the calculation for OPerating EXpenses was performed as well as shown in Figure 4 based on the subsets organization discussed in Zinare Mamo et al. (2023) ordered according to the distribution product rate, bottom pentane partial flowrate and reflux ratio. Learning surrogate models for simulation-based optimization, AIChE Journal 60, 2211\u20132227.", "mime": "application/pdf"}, {"id": "cet-13815", "words": "3764", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-13815", "date": null, "keywords": "energy; food; indicators; land; maelia; management; platform; production; scenarios; systems; water", "summary": "Integrating renewable energy production units in agricultural land must consider water resource conservation and food production constraints and objectives, since installing energy production units in agricultural land limits the area dedicated to the food production. As soon as all the steps of the presented methodological framework are undertaken and become operational, Maelia will be able to simulate renewable energy production scenarios under water and food constraints.", "mime": "application/pdf"}, {"id": "cet-13816", "words": "3057", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-13816", "date": null, "keywords": "analysis; biomass; cca; correlation; data; variables", "summary": "Nonlinear canonical correlation analysis by neural networks. Table 1: Variables of x and y used for CCA statistical analysis.", "mime": "application/pdf"}, {"id": "cet-13817", "words": "4007", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13817", "date": null, "keywords": "chemical; chemistry; fire; laboratories; laboratory; risk; safety; students; university; work", "summary": "Thus, the need for improvements in laboratories was pointed out, to mitigate or eliminate existing risks, in addition to help foster a strong safety culture, through which laboratory risks can be identified and properly managed by all working in such environments. Likewise, everyone considers it important to participate in laboratory safety training.", "mime": "application/pdf"}, {"id": "cet-13818", "words": "3808", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-13818", "date": null, "keywords": "analysis; assessment; conditions; establishments; evaluation; events; failure; gas; report; risk; safety; storage", "summary": "The identification of the standards applicable to natural gas storage establishments and the respective areas of application and methods of coordination. In underground gas storage plants, the random failure of the pipes is the basis (Top-Event) of the most significant events (more extensive damage areas).", "mime": "application/pdf"}, {"id": "cet-13819", "words": "3666", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-13819", "date": null, "keywords": "accumulators; checks; equipment; hydraulic; pressure; pressure equipment; wind; wind turbine", "summary": "The wind turbines contain pressure equipment (hydraulic accumulators), the use of which can pose risks to the safety and health of the personnel assigned to supervise and maintain the wind turbines themselves, if they are not adequately managed. Hydraulic accumulators, built in the European Union following the European directive PED (Pressure Equipment Directive) 2014/68/EU, are pressure equipment that can withstand a maximum operating pressure, Ps, higher than 300 bar.", "mime": "application/pdf"}, {"id": "cet-13820", "words": "2947", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-13820", "date": null, "keywords": "array; cell; figure; mobile; photovoltaic; propagation", "summary": "ISBN 979-12-81206-04-5; ISSN 2283-9216 A Different Approach to the Design of a Rooftop Photovoltaic System Girolamo Di Francia ENEA CR-Portici, P.le E. Fermi 1, 80055 Portici, Italy girolamo.difrancia@enea.it The need to accelerate the energy transition has strongly increased the interest towards the installation of photovoltaic arrays on building roofs. 5. Conclusions Building roofs and facades are supposed to play an important role in the energy transition frame as they offer wide areas for the installation of photovoltaic arrays.", "mime": "application/pdf"}, {"id": "cet-13821", "words": "3664", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-13821", "date": null, "keywords": "alternative; energy; generation; grid; homer; kwh; photovoltaic; system", "summary": "To further incentivize renewable energy, the Ministry of Mines and Energy in Colombia has implemented several measures; for example: Law 1715 of 2014, which promotes the integration of clean energy systems into the national grid, thereby facilitating the development of hybrid energy systems. In addition, the load curve was obtained because it plays a crucial role in analysing and optimizing hybrid energy systems.", "mime": "application/pdf"}, {"id": "cet-13822", "words": "3613", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-13822", "date": null, "keywords": "decision; energy; factors; feature; forest; importance; risks; safety; transition", "summary": "502 3.2 Detailed feature analysis Figure 1: Calculated feature importance. To achieve this, a Random Forest Regressor (Breiman, 2001) is implemented, a powerful machine learning algorithm capable of capturing complex relationships and providing insights into feature importance.", "mime": "application/pdf"}, {"id": "cet-13823", "words": "3990", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13823", "date": null, "keywords": "biomass; carbon; ecosystem; forest; height; peru; services; species; total; tree", "summary": "It should be noted that the study will generate the necessary information for subsequent studies related to the restoration of degraded soils (Fremout et al. 2022) with a view to holistic management that includes the energy use of forest biomass. In Peru, dry forests form an ecosystem of semi-dense vegetation, its main characteristic is a dry climate with short rainy seasons, with arid areas being the most vulnerable (Morales and Tullume 2015).", "mime": "application/pdf"}, {"id": "cet-13824", "words": "3125", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-13824", "date": null, "keywords": "analysis; carbon; clones; cocoa; colombia; content; material; moisture; results; rivero", "summary": "Possessing low moisture content in this raw material gives it an advantage in terms of combustion, since a high moisture content reduces the efficiency of this process, since part of the energy of the raw material must be consumed by evaporating the contained moisture (Su\u00e1rez-Rivero, 2017). Determination of moisture content To demonstrate this indicator, the protocol established in D3173-87 was followed, evidencing the loss of moisture from a known sample mass, which is heated in a stream of nitrogen in an oven maintained at a temperature between 105 \u00b0C y 110 \u00b0C, where the sample was equilibrated for the first time in atmospheric laboratory conditions, the result is the percentage of humidity calculated by the loss of mass. 2.3.", "mime": "application/pdf"}, {"id": "cet-13825", "words": "3080", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-13825", "date": null, "keywords": "biodiesel; coffee; coffee grounds; conversion; grounds; oil; production; rpm; value", "summary": "The conversion of ground coffee oil to biodiesel can be carried out by transesterification of coffee oils catalyzed by acids, alkalis or enzymes, generally using methanol as a reactive substance for the production of fatty acid methyl esters (Batista et al., 2020a). Mueanmas C., Nikhom R., Petchkaew A., Lewkittayakorn J., Prasertsit K.,2019, Extraction and esterification of waste coffee grounds oil as non-edible feedstock for biodiesel production, Renewable Energy, 133, 1414- 1425.", "mime": "application/pdf"}, {"id": "cet-13826", "words": "3384", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-13826", "date": null, "keywords": "construction; demolition; energy; equipment; generation; min; module; slabs; waste", "summary": "Chen et al. (2019) indicated that energy generation is affecting the planet and confirmed the need to look for new alternatives that protect the environment, reduce waste generation and provide a healthy and clean environment for future generations. In the research by Henrique da Paz et al. (2019), they conducted a diagnosis of construction waste generation in the city of Recife, Brazil, and obtained indicators to improve waste management.", "mime": "application/pdf"}, {"id": "cet-13827", "words": "3733", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-13827", "date": null, "keywords": "cells; day; fuel; fuel cells; p.m.; plant; ribbon; soil; voltage", "summary": "Jatoi A.S., Akhter F., Mazari S.A., Sabzoi N., Aziz S., Soomro S.A., Mubarak N.M., Baloch H., Memon A.Q., Ahmed S., 2021, Advanced microbial fuel cell for wastewater treatment\u2014A review, Environ Sci Pollut Res, 28, 5, 5005-5019 Khudzari, J., Kurian, J., Gari\u00e9py, Y., Tartakovsky, B., Raghavan, G.S. V, 2018, Effects of salinity, growing media, and photoperiod on bioelectricity production in plant microbial fuel cells with weeping alkaligrass, Biomass and Bioenergy, 109, 1-9. For the experimental process, microbial fuel cells were built, 3 batteries for mint and 3 batteries for ribbon plant, using graphite rods as electrodes.", "mime": "application/pdf"}, {"id": "cet-13828", "words": "3961", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-13828", "date": null, "keywords": "acid; base; concentration; edbm; feed; membranes; mol; naoh; solution", "summary": "Despite the possibility of valorizing brines, there are still significant knowledge gaps that hinder the large-scale application of EDBM, such as (i) the influence of multi-ionic feed solution on membrane performance, (ii) the lack of data on long-term operation (Blommaert et al., 2021), (iii) the study of scaling forming agents in terms of operational issues, and (iv) the need for developing new membranes with enhanced separation properties, lower costs, and reduced electrical resistance. They were able to achieve solutions containing 10.2 wt. % HCl (~3 mol/L) and", "mime": "application/pdf"}, {"id": "cet-13829", "words": "3393", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-13829", "date": null, "keywords": "biogas; composition; concentration; feedstock; gas; htg; temperature; yield", "summary": "In this paper, an HTG Aspen Plus model with Gibbs free energy minimization is developed to study the effect of process parameters in biogas digestate HTG. It was also found that higher ash contents led to increased H2 yield, lower CO2 and CH4 contents, and higher total product gas yield.", "mime": "application/pdf"}, {"id": "cet-13830", "words": "3521", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-13830", "date": null, "keywords": "energy; food; msw; recovery; road; scenarios; waste", "summary": "Table 1 lists yearly changes in waste fractions per person used for implementing Current Road scenario. Table 1: Yearly changes in waste fractions per person used for assessing Current Road & Circular Road scenarios Waste fraction Residual Food Plastic Paper Glass Metal E-waste Garden Dangerous Waste wood Construction other Yearly change -2% +4% +5% -4% +2% +4% -3%", "mime": "application/pdf"}, {"id": "cet-13831", "words": "3165", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-13831", "date": null, "keywords": "biogas; energy; plants; sludge; treatment; wastewater; wastewater treatment; wwtp", "summary": "Although wastewater treatment plants serve a great purpose in the reduction of environmentally threatening contaminants from wastewater, the increase in energy consumption by these plants raises concerns about climate change. Thus, there has been a rise in literature attempting to map the energy consumption of wastewater treatment plants to help decision-making in the search for alternative energy sources to promote self-sufficient wastewater treatment plants.", "mime": "application/pdf"}, {"id": "cet-14326", "words": "3978", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14326", "date": null, "keywords": "choice; decision; information; research; route; state; time; transport; travel", "summary": "The next section will show the importance of this novel approach, which covers all main use cases of urban public transport and passenger information in order to make a more attractive service that can facilitate the improvement of the sustainability of transport by increasing the share of public transport and reducing the number of cars. They sampled passenger information from a transit on-board survey containing origin\u2013destination locations, demographic details and trip-specific attributes.", "mime": "application/pdf"}, {"id": "cet-14327", "words": "3991", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-14327", "date": null, "keywords": "actions; african; development; nations; region; sahel; united; water", "summary": "Consequently, the secondary research to be presented in this paper aims to review some projects and actions taken by various organizations, like the United Nations and the African Union, that stimulate sustainable development in the Sahel region. The paper concludes with some remarks regarding the efficacy of these projects and actions from the viewpoint of sustainability, and finds that even though these projects and actions are of significance, there is still a long road ahead to reach sustainable development in the Sahel region.", "mime": "application/pdf"}, {"id": "cet-14328", "words": "3740", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14328", "date": null, "keywords": "aggregate; ash; coarse; concrete; fly; multi; strength", "summary": "The effects of replacing cement with up to 30 % fly ash in recycled aggregate concrete (RAC) were examined by Sunayana et al. (2017). Shmlls M., Abed M.A., Horvath T., Bozsaky D., 2022, Sustainability framework of recycled aggregate concrete produced with supplementary cementitious materials, Ain Shams Engineering Journal, 14(8), 102036.", "mime": "application/pdf"}, {"id": "cet-14329", "words": "4641", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-14329", "date": null, "keywords": "blue; cultural; dyeing; family; folk; gy\u0151r; heritage; hungarian; hungary; ildik\u00f3; trade; workshop", "summary": "Based on the proposal of the Intellectual Cultural Heritage Professional Committee of the Hungarian National Committee of UNESCO, the tradition of blue dyeing became part of the National Register of Intellectual Cultural Heritage in 2015. The other reason is that \u2013 based on the proposal of the Intangible Cultural Heritage Committee of the Hungarian National Committee of UNESCO \u2013 the tradition of blue dyeing in Hungary was adopted by the National Register of Intangible Cultural Heritage in 2015.", "mime": "application/pdf"}, {"id": "cet-14330", "words": "4436", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14330", "date": null, "keywords": "animal; beef; beef cattle; beef production; breeding; cattle; food; production; research; sustainability; systems; water", "summary": "Some features and facts related to beef cattle production With the global population growth, the increased demand for food poses greater pressure on the environment than ever before. Population growth and growing food demand raise concerns about the environmental consequences of expanding beef production using current systems.", "mime": "application/pdf"}, {"id": "cet-14331", "words": "3181", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-14331", "date": null, "keywords": "abs; agent; chemical; foaming; injection; mold; molding; specimens; test", "summary": "With this contribution, the unexplored parameters of ABS foaming were expected to be clarified and expand knowledge about this operation type. \u2022 ABS foaming with Expandable Microsphere (EMS) was unsuccessful because of the main difference between the processing temperature of the foaming agent and ABS.", "mime": "application/pdf"}, {"id": "cet-14332", "words": "3691", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14332", "date": null, "keywords": "coli; control; eos; food; liver; meat; mic; oils; product; p\u00e2t\u00e9", "summary": "Essential oils have gained worldwide interest due to their antimicrobial activity. In order to ensure the chemical and microbiological safety of foods, essential oils (EOs) derived from medicinal and aromatic plants have emerged as an ideal substitute for artificial preservatives due to their strong antimicrobial activity and lower health concerns.", "mime": "application/pdf"}, {"id": "cet-14333", "words": "3620", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14333", "date": null, "keywords": "classification; data; learning; machine; management; model; phase; sap; service; support; svm; ticket", "summary": "In summary, this research demonstrated the potential of machine learning algorithms to automate and optimize SAP EWM ticket classification processes in AMS, aligning with sustainability goals without relying on cloud solutions. For instance, SAP offers a solution called Service Ticket Intelligence on the SAP Cloud BTP (Business Technology Platform), which employs machine learning for service ticket classification.", "mime": "application/pdf"}, {"id": "cet-14334", "words": "3955", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14334", "date": null, "keywords": "area; benefits; climate; lake; level; nature; retention; settlements; solutions; velence; water", "summary": "It may happen that due to increased water resources, the farmer\u2019s choice of vegetation has harmful effects on the environment and on the composition of the soil. In the changing conditions, water retention decreases, as does precipitation during summer, resulting in local water shortages.", "mime": "application/pdf"}, {"id": "cet-14335", "words": "4049", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14335", "date": null, "keywords": "breeds; expression; fat; imf; loin; mangalica; muscle; pigs; pork; ppar\u03b3; production; type", "summary": "Poklukar et al. (2020) reviewed the literature on the performance of local pig breeds and modern lean-type pigs and concluded that local breeds generally accumulate larger amounts of fat, exhibit larger adipocyte size and higher activity of lipogenic enzymes. Indigenous pig breeds provide viable 271 alternatives for pork production under poor environmental and nutritional conditions due to an improved tolerance towards various diseases and centuries-long adaptation to local climatic challenges.", "mime": "application/pdf"}, {"id": "cet-14336", "words": "3325", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14336", "date": null, "keywords": "countries; country; development; rank; ranking; road; safety; sdg; sustainability", "summary": "Analyzing these countries with substantial discrepancies between their SDG and road safety rankings could offer valuable insights into potential challenges and opportunities for improvement in both domains. Although many interesting and relevant sources are available both about road safety performances and sustainability ranking of countries, no literature was found about the interaction of these two aspects.", "mime": "application/pdf"}, {"id": "cet-14337", "words": "3935", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14337", "date": null, "keywords": "co2; embedding; emissions; footprint; hungary; material; rail; structure; track; transport; use; ustm", "summary": "The discourse on optimising the construction costs of embedded track structures in Hungary emerged in 2014. Even though correctly chosen parameters can lead to significant cost savings and more accurate compliance with environmental impact requirements, the practical design of embedded track structures is currently based on the examination of single variants and costly laboratory tests, and their optimisation is not addressed at all in Hungarian practice, and only rarely in international practice (Major and Kulcs\u00e1r, 2014).", "mime": "application/pdf"}, {"id": "cet-14338", "words": "3920", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14338", "date": null, "keywords": "carbon; cities; concrete; green; meter; track; tramway; urban; vegetation; water", "summary": "Prioritising and encouraging the construction of green tracks is one of the possibilities to make the urban environment more livable. Gr\u00fcngleis Netzwerk, 2011, The impact and function of green tracks.", "mime": "application/pdf"}, {"id": "cet-14339", "words": "3683", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14339", "date": null, "keywords": "contact; defects; head; life; maintenance; material; rail; results; wheel", "summary": "Horv\u00e1th R., Major Z., 2023, Examination of rail stresses arising in the railway rail-wheel connection. Materials and railway track experts at Sz\u00e9chenyi University have been working on the subject of HC defects in rail heads for several years.", "mime": "application/pdf"}, {"id": "cet-14340", "words": "2925", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-14340", "date": null, "keywords": "0,23; 0,24; 0,31; circular; iii; research; students", "summary": "Introduction Much of the contemporary literature on circular economy (CE) presents the transition to CE as a simple, neutral process characterised by techno-optimism and eco-modernism. The majority of research on circular economy focuses on practical and technical levels, examining the material and energy flows of production-consumption systems, for example, using LCA analysis (Fan et al., 2022).", "mime": "application/pdf"}, {"id": "cet-14341", "words": "4432", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14341", "date": null, "keywords": "environment; et al; microplastics; pollution; polymers; products; research; review; soil; use; waste; water", "summary": "Biodegradable plastic products are made from starch, cellulose, protein, or biosynthetically produced materials, where the primary source of natural biopolymer materials is agriculture, animal husbandry, waste management and forestry. Because of this, a larger amount of biodegradable microplastics can enter the soil in the same amount of time than traditional non-degradable plastics (Qin et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14342", "words": "3740", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14342", "date": null, "keywords": "clusters; countries; country; data; indicators; life; oecd; sdg11; table", "summary": "For the clusters according to hard indicators, the third cluster performs best, with the most positive indicators. One is that hard indicators should be treated and interpreted with caveats.", "mime": "application/pdf"}, {"id": "cet-14343", "words": "3897", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14343", "date": null, "keywords": "area; beaver; distribution; moisture; plant; soil; species; value; vegetation; water", "summary": "Consequently, beaver activity greatly promotes the increase in the number and dominance of tree species that are not typical for beaver feeding habits and also creates a habitat complex rich in grasses and herbaceous species (Pollock et al., 1995). 2.1 Measurement sites and sampling points The study sites required for flora mapping and soil moisture measurement were designated in the section of the Abl\u00e1nc-stream where beaver activity was intense, and identifiable beaver dams as a result of beaver activity were directly connected to individual beaver dams.", "mime": "application/pdf"}, {"id": "cet-14344", "words": "3763", "extension": ".pdf", "flesch": "64", "author": null, "title": "cet-14344", "date": null, "keywords": "body; climbing; crutch; device; energy; engineering; force; people; stair; user", "summary": "Theory \u2013 Stair climbing aid devices In this section, different stair-climbing aid devices are reviewed. For elderly people, a daily activity, climbing stairs, might be difficult.", "mime": "application/pdf"}, {"id": "cet-14345", "words": "3812", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14345", "date": null, "keywords": "banks; central; climate; mandates; monetary; policy; risks; stability; sustainability", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Bohong Wang, Petro Kapustenko Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 979-12-81206-07-6; ISSN 2283-9216 Sustainability Objectives and Central Banks G\u00e1bor Hulk\u00f3, J\u00e1nos K\u00e1lm\u00e1n*, Andr\u00e1s Laps\u00e1nszky Istv\u00e1n Sz\u00e9chenyi University, 9026 Egyetem t\u00e9r 1, Gy\u0151r, Hungary kalman.janos@sze.hu This article examines how addressing climate-related risks and supporting mitigation and adaptation policies fit into central bank mandates. In some cases, there may be political or institutional barriers to amending central bank mandates.", "mime": "application/pdf"}, {"id": "cet-14346", "words": "4119", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14346", "date": null, "keywords": "cement; co2; concrete; construction; emissions; footprint; resistance", "summary": "For this, the emission calculated in tons has to be multiplied by 0.338 gha/t (Lin et al., 2018), giving a value of 0.114 gha/m3 for concrete mixed with CEM T cement and 0.100 gha/m3 for concrete mixed with CEM II cement. Converting the emissions obtained, it can be found that 1,140 gm2 of hypothetical land area is needed to produce one m3 of concrete for a formulation of concrete mixed with CEM I cement type 1,140 gm2, and 1,000 gm2 for a formulation mixed with CEM II cement type.", "mime": "application/pdf"}, {"id": "cet-14347", "words": "3975", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14347", "date": null, "keywords": "animal; average; breeding; data; generation; number; pedigree; population; racka; sheep", "summary": "Table 3: Number of ancestors accounting for the genetic variability Degree of genetic variability Total population Reference population 50 % 30 6 60 % 57 9 70 % 113 15 80 % 318 27 90 % 775 64 100 % 2,208 396 There were 3,828 animals inbred. Sch\u00fctz L., Guly\u00e1s L., Wagenhoffer Zs., S\u00e1f\u00e1r L., Becskei Zs., G\u00e1sp\u00e1rdy A., K\u00e1rp\u00e1ti E., 2023, Determination of the generation interval in the Gyimes Racka and its importance in endangered sheep breeds.", "mime": "application/pdf"}, {"id": "cet-14348", "words": "3774", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14348", "date": null, "keywords": "ash; binder; cement; fly; footprint; lime; materials; mixing; soil; table", "summary": "In Hungary, the practical application of ecological footprint calculation is in its initial phase (Harangoz\u00f3 et al., 2016). Conclusions In Hungary, the practical application of ecological footprint calculations for industrial projects is still in its early stages.", "mime": "application/pdf"}, {"id": "cet-14349", "words": "4229", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14349", "date": null, "keywords": "analysis; clustering; concept; doi; research; use; variables; waste", "summary": "However, the role of consumers should not be underestimated either, 355 as they can indicate their need for ZW products to manufacturers through their purchasing decisions (Badowska, 2019). This may be due to a lack of knowledge about the definition of ZW, as evidenced by the open question in the questionnaire regarding the type of ZW product (very different perceptions represented by respondents) included in the survey.", "mime": "application/pdf"}, {"id": "cet-14350", "words": "4120", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14350", "date": null, "keywords": "asbestos; cement; data; health; index; involvement; management; value; waste", "summary": "The elements of the taxonomic assessment used to determine the integral index of asbestos involvement were the same as Oliinyk et al. (2023) with the method used. \ud835\udc51\ud835\udc510\ud835\udc56\ud835\udc56 = \ufffd\ufffd (\ud835\udc4d\ud835\udc4d\ud835\udc56\ud835\udc56\ud835\udc56\ud835\udc56\u2212\ud835\udc4d\ud835\udc4d0\ud835\udc56\ud835\udc56)2, \ud835\udc5b\ud835\udc5b,\ud835\udc5a\ud835\udc5a \ud835\udc56\ud835\udc56,\ud835\udc56\ud835\udc56=1 (3) Eq(4) Calculation of the taxonomic index of the asbestos involvement integral index, which reflects the alternative measure of asbestos involvement of the Hungarian NUTS-2 regions (Ki) with formula (Eq(4)), where: Ki is the picture of the given level of asbestos involvement in each Hungarian NUTS-2 region; \ud835\udc51\ud835\udc510\ufffd\ufffd\ufffd is the arithmetic mean of the corresponding Euclidean distance; \ud835\udf0e\ud835\udf0e0 is the standard deviation of the corresponding Euclidean distance.", "mime": "application/pdf"}, {"id": "cet-14351", "words": "4808", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14351", "date": null, "keywords": "air; destination; environmental; italy; night; rail; speed; study; sustainability; time; trains; transport; travel", "summary": "The sustainability in night train transport will be defined, the importance of giving passengers a meaningful choice between the two modes of transport will be highlighted, and proposals for improved accessibility and sustainability of rail will be presented as a case study, which could provide a basis for the re-launch of rail transport between Hungary and Italy. Where these conditions exist, high- speed rail transport is certainly preferable in terms of capacity, reliability, land use and specific energy consumption.", "mime": "application/pdf"}, {"id": "cet-14352", "words": "3846", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14352", "date": null, "keywords": "doi; et al; intention; model; research; stores; technology; venkatesh; venkatesh et", "summary": "PS1 Automated smart stores would offer me better value for money (Indrawati and Putri, 2018); deleted PS2 I would not mind paying more to try automated smart stores (Kapser and Abdelrahman, 2020) Appendix A Table A1: Research statements Code CONSTRUCTS AND STATEMENTS PE1 I would find automated smart stores useful in my daily life (Venkatesh et al., 2012); deleted PE2 Using automated smart stores would increase my flexibility daily (Kapser and Abdelrahman, 2020) PE3 Using automated smart stores would help me accomplish things more quickly (", "mime": "application/pdf"}, {"id": "cet-14353", "words": "2740", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14353", "date": null, "keywords": "ball; gearbox; gearing; loss; model; roller; torque; unit", "summary": "Construction of the roller gearing gearbox model When constructing the model, it can be clearly seen that some of the loss sources are load-dependent, and some are speed-dependent, as shown in Figure 2. In technical life, especially in the case of propulsion units used in the vehicle industry, the energetic behavior of propulsion units is of great importance, which typically means the discovery of propulsion unit loss sources and the determination of their magnitude (Concli, 2016).", "mime": "application/pdf"}, {"id": "cet-14354", "words": "3350", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14354", "date": null, "keywords": "accuracy; base; mobile; navigation; platform; robot; rtk; station; system", "summary": "However, determining the position with an accuracy below 2.5 m isn\u2019t essential since rover position accuracy does not increase significantly above a certain level of base station accuracy. 2.5 Robot Operating System 2 (ROS2) ROS2 consists of libraries and tools that facilitate the creation of applications that serve the various functions of robot platforms.", "mime": "application/pdf"}, {"id": "cet-14355", "words": "4435", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14355", "date": null, "keywords": "arabian; breeding; breeds; b\u00e1bolna; equine; farm; grazing; horses; hungary; industry; stud; sustainability", "summary": "Hungarian horse breeds are submitted with the case study of B\u00e1bolna National Stud Farm. In two decades, a heavier riding horse, also useful as a medium carriage horse type, emerged that was clearly distinct from other horses and met the requirements of private breeding demands as well.", "mime": "application/pdf"}, {"id": "cet-14356", "words": "4061", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14356", "date": null, "keywords": "companies; data; efficiency; energy; energy efficiency; measures; modernisation; reports; savings; upgrade", "summary": "Our research focuses on the results of energy efficiency measures implemented by these large consumer companies. Mills and Rosenfeld (1996) identified both direct and indirect economic advantages of energy efficiency measures.", "mime": "application/pdf"}, {"id": "cet-14357", "words": "4486", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14357", "date": null, "keywords": "advertisements; branding; companies; company; employees; employer; hungary; job; jobs; organizations; research; sustainability", "summary": "It is generally accepted that green jobs are those that contribute in some way to the preservation or restoration of the natural environment. The novelty of the research lies in the detailed analysis of green jobs and green-collar jobs and the labor market communication of these concepts, which may also answer the question of whether the green attributes of the jobs or the jobs themselves are attractive to prospective employees.", "mime": "application/pdf"}, {"id": "cet-14358", "words": "4370", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14358", "date": null, "keywords": "assessment; crop; farm; indicators; livestock; management; manure; ratio; soil; sustainability", "summary": "Table 1: List of environmental sustainability indicators Indicator Sub-indicator Definition Scale Scores Optimal Value 1. Table 2: Environmental sustainability indicators for the agricultural enterprises Indicators Agricultural company Crop specialist farm Livestock specialist farm Mixed (plant and livestock) farm Land 0.10 0.70 0.90 1.00 Climate 0.33 0.53 0.53 0.40", "mime": "application/pdf"}, {"id": "cet-14359", "words": "3624", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14359", "date": null, "keywords": "byod; concept; data; distraction; doi; driver; driving; participants; phone; study; system; user; vehicle", "summary": "It enabled in-depth analysis of crucial metrics such as eyes-off- the-road time periods, vehicle movement patterns, and data from vehicle control devices. In this research study, a comprehensive apparatus was utilised to investigate the usability and advantages of the BYOD concept in the context of automotive user interfaces.", "mime": "application/pdf"}, {"id": "cet-14360", "words": "4503", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14360", "date": null, "keywords": "bus; demand; drt; passengers; research; route; service; study; system; time; transit; transportation", "summary": "In case of combination between classical public transit and DRT service, (Zhao et al., 2021) addressed the fleet optimization issue considering the total travel time. Macfarlane et al. (2021) analyzed user perception of DRT service in south Salt Lake County, a low- density suburban area with already existing fixed route and route deviation services.", "mime": "application/pdf"}, {"id": "cet-14361", "words": "3752", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14361", "date": null, "keywords": "car; demand; options; people; research; time; transportation; travel; use", "summary": "By providing an alternative to individual car use, public transportation plays an important role in sustainable transportation. The questionnaire was designed to collect both qualitative and quantitative data, as well as questions about the participants' demographics, travel habits, and attitudes toward sustainable public transportation.", "mime": "application/pdf"}, {"id": "cet-14362", "words": "4296", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-14362", "date": null, "keywords": "blockchain; economy; iot; logistics; management; reverse; supply; supply chain; sustainability; waste", "summary": "Key challenges include tracing material reuse and involving multiple stakeholders in circular supply chains. Huang et al. (2022) highlighted the significance of blockchain and IoT in creating sustainable circular supply chains.", "mime": "application/pdf"}, {"id": "cet-14363", "words": "3884", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14363", "date": null, "keywords": "air; bangladesh; fabric; machine; manufacturing; process; production; sewing; waste", "summary": "Pre-consumer wastes which are process waste, damaged/unsold clothing waste, cut-sew waste, end-roll waste, and sampling yardage waste (Jamshaid et al., 2021). The purpose of this study is to show an improved manufacturing process of a product within a factory which is focused to eliminate in process waste in order to achieve a higher level of sustainability in the production line.", "mime": "application/pdf"}, {"id": "cet-14364", "words": "3925", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14364", "date": null, "keywords": "analytics; data; manufacturing; performance; production; productivity; sewing; time; workers", "summary": "Egyetem t\u00e9r, Gy\u0151r 9026 buics.laszlo@sze.hu The goal of this article is to examine opportunities and show the approach of using big data analytics to boost productivity in the case of clothing manufacturing factories in a sustainable way. However, with the help of big data analytics used in a proper method, the collected information can be used to track insufficiencies in different areas of manufacturing operations.", "mime": "application/pdf"}, {"id": "cet-14365", "words": "4168", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14365", "date": null, "keywords": "allele; beta; casein; cows; dairy; frequency; genotype; herds; milk; polymorphism", "summary": "The growing popularity of A2 milk due to potential health benefits is driving Hungarian stakeholders towards the targeted selection of dairy populations; animal genotyping is an evident approach to facilitate this transition. The scientific community continues to investigate the differences between A1 and A2 milk, including the potential health benefits.", "mime": "application/pdf"}, {"id": "cet-14366", "words": "3455", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14366", "date": null, "keywords": "battery; energy; engine; hybrid; kwh; power; propulsion; system; torque", "summary": "[g/kWh] according to torque with urban working points, (b) Power curve of the car with urban working points Figures 2a and 2b represent the urban working points with black crosses. ISBN 979-12-81206-07-6; ISSN 2283-9216 Smart Hybrid Energy Management System in a Passenger Car P\u00e9ter N\u00e9metha,*, Barna Hanulab, Andr\u00e1s Lajos Nagyb aDepartment of Applied Sustainability, Sz\u00e9chenyi Istv\u00e1n University, Hungary bDepartment of Propulsion Technology, Sz\u00e9chenyi Istv\u00e1n University, Hungary nemeth.peter@sze.hu The technological advancements of internal combustion engines, batteries, and electric propulsion technology have reached such a level that they bring a new dimension to the potential of hybrid propulsion systems.", "mime": "application/pdf"}, {"id": "cet-14367", "words": "4571", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14367", "date": null, "keywords": "community; development; kimle; life; mecs\u00e9r; organizations; resources; settlement; sustainability; szigetk\u00f6z; village", "summary": "The Ladom\u00e9ri Farm Association was registered as an association in 2010 to pursue community development and cultural and nature conservation activities. (in Hungarian) Vercseg I., 2020, Community and participation, Theory of community development and the practice of community work, ELTE Faculty of Social Sciences, Community and Civil Studies Master's, Budapest.", "mime": "application/pdf"}, {"id": "cet-14368", "words": "3722", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14368", "date": null, "keywords": "copper; economy; factor; filling; machine; remanufacturing; slot; winding; wires", "summary": "The advantages of remanufactured electric machines are that they are cheaper than a new product, there is no need for a new frame where the machine is utilized, and the energy savings are higher than initially. In the case of electric machines, the circular economy concept is about the process of reuse, refurbishment, remanufacturing, and recycling.", "mime": "application/pdf"}, {"id": "cet-14369", "words": "3543", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-14369", "date": null, "keywords": "changes; daily; data; days; direction; hungarian; plain; speed; wind", "summary": "Wind speed trends are described by the slope of the fitted line in percent increase or decrease of wind speed per decade. 5. Conclusions Our examination of wind speed data from the Carpathian Basin spanning 1973-2022 has unveiled previously unknown regional variations in trends.", "mime": "application/pdf"}, {"id": "cet-14370", "words": "4600", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14370", "date": null, "keywords": "development; goals; implementation; law; nations; sdgs; states; sustainability; united; world", "summary": "kecskesg@ga.sze.hu The study deals with the legal implications and core meaning of environmental sustainability. By giving an in-depth analysis of the entire legal background of environmental sustainability, the study reveals the relevant normative basis of this concept in international law.", "mime": "application/pdf"}, {"id": "cet-14371", "words": "4585", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14371", "date": null, "keywords": "analysis; education; factor; intelligence; learning; model; research; study; university; use; variables", "summary": "Future research should incorporate these findings into the design of possible structural models, as this area of AI research has the potential to bring significant social science and educational benefits. This type of factor analysis can be used for the identification of the smallest number of hypothetical structures (factors, dimensions) and for the identification of structural differences between the variables to be measured (Watkins, 2018).", "mime": "application/pdf"}, {"id": "cet-14372", "words": "3706", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14372", "date": null, "keywords": "activities; average; companies; forestry; hungarian; information; reporting; sustainability", "summary": "It is concluded that although forestry companies publish some level of information and pay more attention to the disclosure of this type of information than agricultural companies, there is a slight gap in both sectors. While forestry companies have an average of 410 employees, agricultural companies employ an average of 301 people.", "mime": "application/pdf"}, {"id": "cet-14373", "words": "4634", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14373", "date": null, "keywords": "commission; energy; european; european commission; germany; green; hungary; hydrogen; policy; production; strategy", "summary": "It can be stated regarding the EU H2 landscape that the use of H2 for energy production was not significant (under 2 % on an annual basis) in 2020. This article investigates H2 production and demand in the EU, as well as the directives and incentives of the EU to accelerate H2 production and H2 technologies in general.", "mime": "application/pdf"}, {"id": "cet-14374", "words": "3913", "extension": ".pdf", "flesch": "27", "author": null, "title": "cet-14374", "date": null, "keywords": "activities; barriers; development; education; istv\u00e1n; sustainability; sz\u00e9chenyi; universities; university", "summary": "Environmental sustainability refers to maintaining biodiversity, preserving natural resources, and reducing emissions to ensure a healthy environment for future generations (Theis and Tomkin, 2015). Based on the connecting scientific literature, it is revealed that the ways to implement sustainability actions are well described, although its realization in everyday actions is less discussed.", "mime": "application/pdf"}, {"id": "cet-14375", "words": "3955", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-14375", "date": null, "keywords": "banks; development; group; growth; issues; material; report; reporting; sdgs; sustainability", "summary": "Recent literature provides a multi-faceted framework for sustainability assessment analysing either a specific sector (e.g., transport) based on selected SDGs in terms of targets and indicators using OECD and UN reports (Toledo-Vazqueza et al., 2022) or focusing on a less researched area of the triple bottom line, the social aspect (Abd Rashid et al., 2021), or exploring the evolution of sustainability reports and their assurance during a particular time horizon (Moneva et al., 2023). Regarding the quality and the format, a distinction is made between sustainability reports and integrated reports.", "mime": "application/pdf"}, {"id": "cet-14376", "words": "3755", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14376", "date": null, "keywords": "android; blockchain; countries; data; food; research; supply; system; technology", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Bohong Wang, Petro Kapustenko Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 979-12-81206-07-6; ISSN 2283-9216 Examining the Evolution of Technological Conditions from the Point of View of the Application of Blockchain-based Data Management in Food Supply Chains Andr\u00e1s Bertalana*, Balazs Gyengeb, K\u00e1roly Kacza aSz\u00e9chenyi Istv\u00e1n University, V\u00e1r 2., 9200, Mosonmagyar\u00f3v\u00e1r, Hungary bBudapest, Metropolitan University, Nagy Lajos kir\u00e1ly 1-9, 1148 Budapest, Hungary bertalan.andras@sze.hu A critical point in making food chains more sustainable is to find different ways to increase efficiency. Blockchain technology offers the potential for reliable data management and simplified administration and is, therefore, definitely a tool to consider if the aim is to enhance sustainability in food chains.", "mime": "application/pdf"}, {"id": "cet-14377", "words": "4372", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14377", "date": null, "keywords": "countries; economic; finances; jurisdictions; member; pricing; revenue; shifting; tax; transfer", "summary": "The instability of tax revenue is a crucial risk for maintaining fiscal balance, as it can lead to fluctuations in revenues and make it challenging to maintain fiscal equilibrium, limiting the funds available for essential public services and investments (Evans, 2020). Developing countries may face capacity constraints in tax administration and enforcement, leading to challenges in effectively capturing tax revenue from multinational corporations and wealthy individuals.", "mime": "application/pdf"}, {"id": "cet-14378", "words": "4012", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14378", "date": null, "keywords": "business; companies; company; digitalization; et al; management; performance; research; smes; sustainability", "summary": "Tarut\u0117 A., Gatautis R., 2014, ICT Impact on SMEs Performance. The aim of the research is to understand the effect of environmental sustainability and the usage of management information systems on profitability in the case of SMEs.", "mime": "application/pdf"}, {"id": "cet-14379", "words": "4291", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14379", "date": null, "keywords": "cdw; construction; demolition; economy; european; hungary; industry; management; materials; waste", "summary": "The Ministry of Innovation and Technology (2021) already draws attention to the fact that the preparation, reprocessing, and utilisation of construction waste for road and other construction is not yet a widespread solution in the country, and its current utilisation is estimated around 30-40 %. The European Commission (2018) has developed a structured plan for the management of construction waste to ensure maximum reuse and recycling.", "mime": "application/pdf"}, {"id": "cet-14380", "words": "3674", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14380", "date": null, "keywords": "data; database; density; design; engineering; field; parameters; sand; soil; stress; swelling", "summary": "The procedure involves analyzing geotechnical data using ANNs to develop correlations for effective decision-making, mitigating potential damage caused by swelling clays. This paper presents a typical application that investigates the impact of swelling clays and discusses its integration into the BENIP framework, with an emphasis on its role in advancing sustainability in geotechnical engineering.", "mime": "application/pdf"}, {"id": "cet-14381", "words": "3323", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14381", "date": null, "keywords": "consumption; decision; experiment; eye; labels; participants; products", "summary": "The aim of the study is to investigate the decision-making processes of Hungarian consumers regarding sustainable products and to validate the eye-trackers methodology to measure this. As a result of the research, Hungarian consumers are not aware of sustainable products overall, and based on the interviews, they only buy a small proportion of them.", "mime": "application/pdf"}, {"id": "cet-14382", "words": "3375", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14382", "date": null, "keywords": "avs; consumption; demand; fuel; fuel consumption; study; transportation; travel; vehicles", "summary": "While AVs themselves can be designed to operate more efficiently and reduce fuel consumption compared to traditional human-driven vehicles, the broader effects on travel behavior and demand could have a significant influence on overall fuel consumption. For this reason, this study examines the relationship between travel demand and fuel consumption, considering factors such as travel time, number of trips, and travel patterns.", "mime": "application/pdf"}, {"id": "cet-14383", "words": "3851", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14383", "date": null, "keywords": "bag; box; cluster; consumers; group; international; packaging; pouch; wine", "summary": "Orlowski et al. (2022) conducted a 5-study experiment on consumer acceptance of alternative wine packaging for can packaging. In the present study, we investigate consumer acceptance of alternative wine packaging (bag-in-box, pouch), for which knowledge of existing research and literature is essential and forms the basis of this investigation.", "mime": "application/pdf"}, {"id": "cet-14385", "words": "4011", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-14385", "date": null, "keywords": "chemical; design; distillation; energy; engineering; liquid; material; mixtures; separation; units", "summary": "It can be employed to propose plausible separation sequences (Doherty and Caldarola, 1985). Even though the RCM provides the designer with insightful information, the identification of separation sequences is still a daunting task, as numerous separation alternatives and configurations may be found in the same RCM.", "mime": "application/pdf"}, {"id": "cet-14386", "words": "4136", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-14386", "date": null, "keywords": "companies; data; disclosures; european; information; reporting; reports; sustainability; taxonomies; taxonomy; xbrl", "summary": "Taxonomy tags A notable feature of XBRL taxonomies used for sustainability reporting is the inclusion of external item lists, such as those sourced from Eurofilings, as value sets for dimension items. However, along with its benefits, this transition has presented companies with a prolonged and relatively slow adoption phase and also technical challenges, particularly in navigating the complexities of sustainability reporting, such as determining \u2018what\u2019 data to report (e.g., the effect of sustainable aspects on financial outcomes and vice versa) and \u2018how\u2019 (i.e., method of technology integration in internal strategy and operational frameworks) to communicate it effectively (Mora-Rodriguez et al., 2017).", "mime": "application/pdf"}, {"id": "cet-14387", "words": "3972", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14387", "date": null, "keywords": "aspects; environment; index; methodology; pedestrian; spaces; transport; walkability; walking", "summary": "The walkability index is a complex methodology, largely incorporating aspects of previous indices presented in the literature review, but compared to the latter, we have placed a strong emphasis on the needs of people with disabilities (e.g. hearing impaired, visually impaired), people with more difficult mobility (e.g. elderly, people with children) during pedestrian transport as a pedestrian surface is good if everyone can use it. The 10 indicators are: everyone feels at home; it's easy to cross the road; there are shady and sheltered places; there is space to stop and rest; there is not too much noise; people like to walk, cycle or use public transport; people feel safe; there is something to see and do; people have fun, and the air is clean.", "mime": "application/pdf"}, {"id": "cet-14388", "words": "2650", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14388", "date": null, "keywords": "area; data; road; safety; severity; traffic", "summary": "According to the data, the severity of road traffic risks in the study area is relatively low, probably due to the fact that the area is an area of mixed industrial and residential commercial activities, resulting in relatively high traffic in the area, so the speed is not very high, so there are no cases of high severity. These data point to the need for road safety studies to find solutions to the problems that arise, with a particular focus on driver behaviour.", "mime": "application/pdf"}, {"id": "cet-14389", "words": "4538", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14389", "date": null, "keywords": "banking; development; economic; growth; indicators; level; paper; resilience; system", "summary": "With fulfilling the aim of the paper \u2013 to have an outlook about the different interpretations of SFD \u2013 the expected result of the recent paper is to represent the relationship between sustainable development and financial development, the future potential for sustainable financial development, the preconditions for its success, and the main channels through which sustainable banking can enhance financial development on macro-level as well. This paper aims to introduce a structured literature outlook about the different interpretations of sustainable financial development (SFD) on micro and macro levels.", "mime": "application/pdf"}, {"id": "cet-14390", "words": "3369", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14390", "date": null, "keywords": "commission; development; digital; education; erasmus+; european; hungary; ksh; public; skills", "summary": "2.2 Erasmus+DUDEN A concrete personal example is the Erasmus+ DUDEN (Digitale Unterrichtsmaterialien f\u00fcr Digital European Natives/ Digital teaching materials for Digital European Natives) application of the Erasmus+ KA2 (Erasmus+ Key Action 2) preschool and school partnerships subprogram, in which vocational training institutions from Germany (Essen), Hungary (Gy\u0151r), Romania (Sz\u00e9kelyudvarhely) and Austria (Vienna) cooperated. The increase in the Hungarian grant amount for Erasmus+ education, which helps to reduce regional inequalities, parallels the tendentious increase in the number of applications.", "mime": "application/pdf"}, {"id": "cet-14391", "words": "3098", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-14391", "date": null, "keywords": "building; christchurch; construction; design; earthquake; materials; practices; research; sustainability", "summary": "4.3 Sustainable Seismic Design in Christchurch The Christchurch Central Library, an embodiment of sustainable seismic design, seamlessly integrates the use of sustainable construction materials into its structure, demonstrating the city's dedication to both environmental sustainability and earthquake resilience. It also emphasizes the importance of considering geotechnical conditions in urban planning and construction, and the role of policy in promoting sustainable seismic design.", "mime": "application/pdf"}, {"id": "cet-14392", "words": "2774", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14392", "date": null, "keywords": "constraint; design; fatigue; optimization; topology; volume", "summary": "Similar to the findings of the previous example, during fatigue constraint topology optimization, the value of \ud835\udf0e\ud835\udc3b\ud835\udc40\ud835\udc3b \ud835\udc5a\ud835\udc4e\ud835\udc65 decreased significantly in comparison to the values obtained for linear and geometrically nonlinear designs. However, for fatigue constraint optimization, the value of \ud835\udc39 is treated as a displacement with a magnitude of 2 mm.", "mime": "application/pdf"}, {"id": "cet-14393", "words": "3162", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14393", "date": null, "keywords": "analysis; heat; model; numerical; parameters; processes; simulation; temperature; variables; welding", "summary": "Introduction The growing need for responsible and efficient practices has fuelled significant advancements in numerical simulations and modeling techniques for welding processes. The finite element analysis (FEA) plays a pivotal role in this work, serving as a powerful tool that empowers researchers to conduct comprehensive thermo-mechanical analyses of welding processes.", "mime": "application/pdf"}, {"id": "cet-14394", "words": "3457", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14394", "date": null, "keywords": "analysis; conflict; crossing; pedestrian; pet; road; safety; time; traffic; vehicle", "summary": "Despite the recent emphasis on pedestrian safety, there is still a critical need to investigate the causal factors of accidents involving vulnerable road users (VRUs) and to reveal their relationship with road design characteristics (Bezerra, 2019). Zhang C., Zhou B., Chen G., Chen F., 2017, Quantitative analysis of pedestrian safety at uncontrolled multi- lane mid-block crosswalks in China.", "mime": "application/pdf"}, {"id": "cet-14395", "words": "3102", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-14395", "date": null, "keywords": "analysis; co2; cycle; emissions; life; mode; pavement; uniform; wander", "summary": "Wider truck lane width would assist in improved use of uniform wander mode also. The use of uniform wander mode decreases the stress concentrations and provides sufficient recovery time for pavement to recover from creep strain occurrences (Zhou et al., 2019).", "mime": "application/pdf"}, {"id": "cet-14396", "words": "2808", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14396", "date": null, "keywords": "age; black; forest; locust; overmature; stands; stock; wood", "summary": "According to our results, in private overmature black locust forests, 52 % of the stock is only 1\u20135 years overaged, while in state-owned forests, this category makes up 65 % of the wood stock (Figure 5). The total amount of overmature black locust wood stock has been examined by Borovics et al. (2023).", "mime": "application/pdf"}, {"id": "cet-14397", "words": "2901", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14397", "date": null, "keywords": "forest; hungary; monitoring; ndvi; satellite; sensing", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Bohong Wang, Petro Kapustenko Copyright \u00a9 2023, AIDIC Servizi S.r.l. ISBN 979-12-81206-07-6; ISSN 2283-9216 Remote Sensing Supported Sustainable Forest Management in Hungary Tam\u00e1s Moln\u00e1r Resarch Fellow, Forest Research Institute, University of Sopron, Department of Ecology and Silviculture, Budapest, Hungary molnar-tamas@uni-sopron.hu Climate change and the growing number of forest damage demanded a response from forestry professionals. My results indicated that the satellite imagery and ground-based reports provided suitable input for sustainable forest damage monitoring.", "mime": "application/pdf"}, {"id": "cet-14398", "words": "4348", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14398", "date": null, "keywords": "carbon; carbon footprint; catering; co2; conference; energy; equivalent; event; footprint; total", "summary": "Carbon footprints, which address carbon dioxide or, simply, carbon, are a measure of the environmental impact of human activities. Carbon footprints can be connected to air pollution and climate change, and they indicate the total \u2013 direct or indirect \u2013 greenhouse gas (GHG) emissions caused by an individual, organisation, project, event, or product expressed in terms of carbon dioxide equivalent.", "mime": "application/pdf"}, {"id": "cet-14399", "words": "3012", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14399", "date": null, "keywords": "abts; analysis; antioxidant; beech; climate; compounds; factor; leaves; provenances", "summary": "According to this, both Factors 1 and 2 are antioxidant factors, since ABTS has a relationship with both of these factors. The assessment of plant stress via antioxidant compounds as markers can help to elaborate methods for this purpose.", "mime": "application/pdf"}, {"id": "cet-14400", "words": "3165", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14400", "date": null, "keywords": "anaerobic; cellulose; content; digestion; fungal; lignin; methane; pretreatment; production", "summary": "From different pretreatment ways, biological pretreatments seem particularly advantageous because they require slight operating conditions, involve relatively low operational investments, and are often eco-friendly (Liu et al., 2017). One such solution could be the expansion of biomass utilization by incorporating previously unused or research-phase substrates on an industrial scale (Br\u00e9mond et al., 2018).", "mime": "application/pdf"}, {"id": "cet-14401", "words": "4239", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-14401", "date": null, "keywords": "aae; antioxidant; bark; capacity; cones; g dw; results; samples", "summary": "p<0.02 European hornbeam 6.2 \u00b1 0.26b 30.1 \u00b1 1.01b 86.1 \u00b1 0.81a 25.2 \u00b1 0.63b Black locust 11.1 \u00b1 0.90f 36.4 \u00b1 0.67b 146.6 \u00b1 2.48b 42.7 \u00b1 3.00d European beech 13.3 \u00b1 1.88f 13.6 \u00b1 0.12a 63.7 \u00b1 2.72a 9.9 \u00b1 0.05a Sessile oak 4.6 \u00b1 0.13a 44.5 \u00b1 0.12c 138.4 \u00b1 7.91b 46.2 \u00b1 1.39d Wild cherry 4.7 \u00b1 0.05a Sweet chestnut 10.5 \u00b1 2.16bc 62.8 \u00b1 2.57f 199 \u00b1 5.00e 62.5 \u00b1 1.59de Black locust 10.2 \u00b1 0.70bc 40.6 \u00b1 2.63bcd 112 \u00b1 1.84a 43.2 \u00b1 0.21ab Norway maple 7.32 \u00b1 0.44ab 50.1 \u00b1 1.82e 187 \u00b1 2.96e 80.2 \u00b1 1.47g Downy oak 8.06 \u00b1 0.38ab 67.0 \u00b1 2.12fg 143 \u00b1 2.47cd 63.8 \u00b1 3.31e Turkey oak 7.21 \u00b1 0.47ab 69.2 \u00b1 2.28g 190 \u00b1 4.05e 65.9 \u00b1 1.54ef", "mime": "application/pdf"}, {"id": "cet-14402", "words": "3284", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14402", "date": null, "keywords": "acacia; analysis; fruits; honey; nectar; pinus; plants; pollen; samples; species; spp", "summary": "The aim of this article is to report the alteration of the floristics spectrum of plants in the last 20 y foraged by honeybees and in the identification of the most important plant sources for honey pollen. References Behm F., von der Ohe K., Henrich W., 1996, Reliability of honey pollen analysis, Determination of the pollen frequency.", "mime": "application/pdf"}, {"id": "cet-14403", "words": "4094", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14403", "date": null, "keywords": "cities; contributions; design; energy; energy management; management; networks; review; strategies; systems", "summary": "As a result, finding the best energy distribution that maximizes societal, environmental, and economic benefits must be the guiding premise for designing smart energy systems. Furthermore, it is expected that smart energy systems will be resilient to disturbances, i.e., that they will have an adequate response to failures and changes in demand patterns.", "mime": "application/pdf"}, {"id": "cet-14404", "words": "2710", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-14404", "date": null, "keywords": "ballast; bwts; figure; project; retrofitting; scanning; ship; water; week", "summary": "The process begins with the calibration and deployment of the 3D scanning equipment followed by the systematic scanning of compartments associated with BWTS installation. By minimising uncertainties, this approach ensures efficient project execution, leading to cost savings and timely delivery of BWTS installations.", "mime": "application/pdf"}, {"id": "cet-14405", "words": "4011", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14405", "date": null, "keywords": "batteries; battery; environmental; factories; hungarian; hungary; opinion; production; public; research; respondents; workers", "summary": "It can be compared to the plans for the installation of battery factories. Furthermore, the study seeks to understand the underlying factors contributing to the public's apprehension toward battery factories and their associated risks.", "mime": "application/pdf"}, {"id": "cet-14406", "words": "3416", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14406", "date": null, "keywords": "chitosan; dose; removal; results; treatment; turbidity; wastewater", "summary": "Evaluaci\u00f3n de la aplicaci\u00f3n del quitosano como biocoagulante para la remoci\u00f3n de turbidez en el tratamiento de agua residual de una lubricadora, Universidad Agraria del Ecuador. Uso de materiales org\u00e1nicos como filtros en el tratamiento de aguas residuales provenientes de granjas porcicolas, Universidad Nacional Agraria de la Selva.", "mime": "application/pdf"}, {"id": "cet-14407", "words": "3526", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14407", "date": null, "keywords": "density; extraction; model; oil; solubility; \ud835\udc34\ud835\udc34 \ud835\udc47\ud835\udc47", "summary": "DOI: 10.1016/j.jhazmat.2008.03.069 Taseski N., 2015, Supercritical fluid extraction of Sclerocarya birrea kernel oil, Doctoral dissertation), University of North West, North West, South Africa Valverde A., Alvarez-Florez J., Recasens, F., 2020, Mathematical modelling of supercritical fluid extraction of liquid lanoline from raw wool. DOI: 10.1080/10942912.2022.2064491 Mohamed Zahari M.A., Salleh L.M., 2017, Application of genetic algorithm on model-based optimization of supercritical carbon dioxide extraction: an overview, Chemical Engineering Transactions, 56, 67-72 DOI:10.3303/CET1756012 Mokgolodi N.C., Ding Y.F., Setshogo M.P., Ma, C., Liu Y.J., 2011, The importance of an indigenous tree to southern African communities with specific relevance to its domestication and commercialization: a case of the marula tree.", "mime": "application/pdf"}, {"id": "cet-14408", "words": "4087", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14408", "date": null, "keywords": "clostridium; doi; electron; et al; glycerol; metabolic; product; substrate; yield", "summary": "Koch, C. et al. (2017) \u2018Predicting and experimental evaluating bio-electrochemical synthesis \u2014 A case study with Clostridium kluyveri\u2019, Bioelectrochemistry, 118, pp. Similar biomass functions have been used with models for C. autoethanogenum (Kracke et al., 2016) and C. kluyveri (Koch et al., 2017).", "mime": "application/pdf"}, {"id": "cet-14409", "words": "3972", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14409", "date": null, "keywords": "ch4; co2; emissions; fertilizer; gas; ghg; n2o; soil", "summary": "Although many GHG emission studies have been 715 conducted in various places, there is still a gap in the availability of comprehensive academic information on agricultural GHG emissions in Minahasa District, where this study is ongoing. Figure 3 shows fluctuating variations in agricultural GHG emissions over the five years from 2005 to 2022.", "mime": "application/pdf"}, {"id": "cet-14410", "words": "3192", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14410", "date": null, "keywords": "air; arsenic; concentration; effluent; min; mnb; pressure; reduction; time", "summary": "Table 1: Reduction percentage of arsenic, as a function of air pressure (psi) and aeration time (min) Item N\u00b0 Air Pressure (Psi) Time (min) Initial As (ppm) Final it was determined that the interaction between aeration time (min) and air pressure (psi) in the treatment of a solution containing arsenic (obtained by alkaline leaching with NaOH and Na2S), by MNB, has a significant effect on the percentage of arsenic decrease, showing a higher value at a time of 5 min and 25 psi of air pressure.", "mime": "application/pdf"}, {"id": "cet-14411", "words": "2975", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-14411", "date": null, "keywords": "briquettes; calorific; charcoal; coconut; composition; content; fuel; peel; rambutan; shell; value", "summary": "The lowest water content is 4.05% at a composition of 10:90 for rambutan peel charcoal: coconut shell charcoal. The results indicate that the more mass ratio of coconut shell charcoal composition can increase the calorific value.", "mime": "application/pdf"}, {"id": "cet-14412", "words": "3584", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14412", "date": null, "keywords": "adsorption; concentration; detection; r6 g; raman; sers; substrates; surface", "summary": "Figure 3b demonstrates the direct correlation of R6G adsorbed concentration versus Raman intensity. 9 Figure 2: (a) Calibration curves for R6G in solution; (b) R6G isotherm Correlating Raman Intensity and R6G Adsorption.", "mime": "application/pdf"}, {"id": "cet-14413", "words": "3603", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14413", "date": null, "keywords": "extraction; flavonoids; fruit; passion; phenolics; solvent", "summary": "Ultrasound assisted extraction (UAE) of bioactive compounds from fruit and vegetable processing by-products: A review. However, the prolonged extraction time can generate inter-bubble collisions and structural damage of phenolics and flavonoids, decreasing extraction yield (Rao et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14414", "words": "3541", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14414", "date": null, "keywords": "activation; adsorbent; adsorption; carbon; chemical; hg2; material; mercury; removal; wastewater", "summary": "Gluszcz P., Zakrzewska K., Wagner-Doebler I., Ledakowicz S., 2008, Bioreduction of ionic mercury from wastewater in a fixed-bed bioreactor with activated carbon, Chemical paper, 62, 232-238, https://doi.org/10.2478/s11696-008-0017-z Gupta S., Bhattacharyya K., 2011, Kinetics of adsorption of metal ions on inorganic materials: a review, Advances in colloid and interface science, 162, 39\u201358, https://doi.org/10.1016/j.cis.2010.12.004 Hadi P., To M., Hui C., Lin C.S.K., Mckay, G., 2015, Aqueous mercury adsorption by activated carbons, Water Research, 73, 37\u201355. The presence of diverse functional groups in activated carbon (CA) is evident from the distinct bands observed in its spectra when compared with non-activated carbon (CNA).", "mime": "application/pdf"}, {"id": "cet-14415", "words": "3786", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14415", "date": null, "keywords": "co2; coefficient; extraction; marula; mass; oil; pressure; temperature; transfer", "summary": "Honarvar et al. (2013) noted that the axial dispersion coefficient and mass transfer coefficient decreased with increased pressure. The findings also show that as the pressure increased, the reliance of the diffusion coefficient on temperature reduced which is also indicated by the decrease in the slopes for the diffusion, dispersion, and mass transfer coefficients when the pressure was elevated.", "mime": "application/pdf"}, {"id": "cet-14416", "words": "3262", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14416", "date": null, "keywords": "carbonate; co2; field; flow; gas; process; temperature", "summary": "Processes using magnetic fields do not need to use high operating temperatures because the electron transfer in decomposing carbonate rocks can match the thermal decomposition process at high temperatures. Chernavsky et al. studied the effect of magnetic fields on the reduction of magnetite with hydrogen, with the operating temperature used being 350 oC and the general operating temperature being T>450 oC (Chernavsky et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14417", "words": "4123", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14417", "date": null, "keywords": "cell; et al; marcescens; nacl; pigment; prodigiosin; production; scale; serratia; tilapia", "summary": "Tilapia scales were obtained and subjected to alkaline hydrolysis to produce hydrolysates, which served as a culture medium for prodigiosin production. Different conditions of stirring speed (100 - 250 rpm) and NaCl (0.5 - 2.5%) were evaluated for prodigiosin production over a 72 h incubation period at an initial pH of 7 and 25 \u00b0C.", "mime": "application/pdf"}, {"id": "cet-14418", "words": "3597", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14418", "date": null, "keywords": "catalyst; gas; micro; model; pellet; permeability; reactor; scale; temperature", "summary": "Firstly, a particle-resolved 3D-packed structure of the catalyst pellets (micro-scale model) was developed, and the effective properties, including porosity, specific surface area, permeability, and thermal conductivity, were evaluated. 2.2 Simulation method of micro-scale model In the micro-scale model, the 3D random-packed structure of the catalyst pellets is constructed first, and the porosity and the specific surface area are estimated.", "mime": "application/pdf"}, {"id": "cet-14419", "words": "3905", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14419", "date": null, "keywords": "compounds; et al; extraction; lac; nades; phenolic; pro; tpc; uae; watermelon", "summary": "The combination of an expanded contact area and an enhanced cavitation effect synergistically enhanced the efficiency of phenolic compound extraction from WP (Vo et al., 2023). The traditional extraction techniques, including solvent extraction, and mechanical expelling are commonly utilized to recover plant component.", "mime": "application/pdf"}, {"id": "cet-14420", "words": "4119", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14420", "date": null, "keywords": "acetone; biomass; carotenoid; content; glucose; model; production; toruloides; yeast", "summary": "The reassessment of the optimal model revealed strong compatibility between the predictive and experimental models regarding dry biomass and carotenoid content. 2.5 Optimization of R. toruloides fermentation medium Glucose, malt extract, KH2PO4, MgSO4.7H2O, NH4Cl, yeast extract (Saran et al., 2017), H2O2, NaCl (Marova et al., 2010), and culture conditions (pH 5.6 \u00b1 0.2, 200 rpm, 25-30 \u00b0C) were chosen to study factors affecting R. toruloides yeast biomass and carotenoid content.", "mime": "application/pdf"}, {"id": "cet-14421", "words": "3500", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14421", "date": null, "keywords": "aluminium; ath; composites; flame; foam; hydroxide; oxygen; polyurethane; rpuf", "summary": "Rigid polyurethane foam (RPUF) is categorized as a flammable polymer, releasing substantial heat and toxic gases like carbon monoxide and hydrogen cyanide during a fire outbreak (Chen et al., 2018). Rigid polyurethane foam (RPUF) is a polymer-based foam featuring carbamate groups in its main chain.", "mime": "application/pdf"}, {"id": "cet-14422", "words": "3147", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14422", "date": null, "keywords": "air; control; dust; emissions; exposure; figure; health; silica; system", "summary": "Dust concentration. This research aims to propose preventive measures for addressing health issues caused by dust exposure in a construction aggregate crushing plant.", "mime": "application/pdf"}, {"id": "cet-14423", "words": "3841", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14423", "date": null, "keywords": "cell; current; energy; fuel; hybrid; hydrogen; power; storage; system; wind", "summary": "Review of hybrid renewable energy systems with comparative analysis of off-grid hybrid system. Energy storage systems are an integral part of hybrid renewable energy systems, and hydrogen storage is one of the newest storage systems.", "mime": "application/pdf"}, {"id": "cet-14424", "words": "3339", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14424", "date": null, "keywords": "adsorption; chemical; dye; fuchsin; model; moringa; mos; oleifera; retention; study", "summary": "The experiments carried out have shown that MOS materials are suitable for discoloration of wastewater. The experiments carried out have shown that MOS materials are suitable for discoloration of wastewater.", "mime": "application/pdf"}, {"id": "cet-14425", "words": "4342", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14425", "date": null, "keywords": "biochar; cells; composite; cycle; hydroxyapatite; materials; mfc; mfcs; silverskin; wastewater", "summary": "Ghiara G., Campisi S., Goglio A., Formicola F., Balordi M., Gervasini A., Trasatti S.P.M., Adani F., Franzetti A., Cristiani P., 2023, Biochar based cathode enriched with hydroxyapatite and Cu nanoparticles boosting electromethanogenesis, Sustain. Silverskin, the byproduct of coffee roasting responsible for generating significant waste worldwide, was subjected to a pyrolysis process to produce conductive biochar, then characterized in terms of physico-chemical properties.", "mime": "application/pdf"}, {"id": "cet-14426", "words": "3614", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14426", "date": null, "keywords": "carbon; compost; composting; microorganisms; months; process; spanish", "summary": "Inoculated compost, particularly with Chromobacterium violaceum and Pseudomonas luteola, showed a reduced C/N due to their growth, while Paenibacillus alvei and Lactobacillus collinoides improved phosphorus solubilization and reduced soluble organic carbon, respectively. This parameter ranged between 60 and 80 %, which is higher than the normal range established of 40 to 60% (Azim et al., 2018; Campitelli et al., 2014; Mehta and Sirari, 2018).", "mime": "application/pdf"}, {"id": "cet-14427", "words": "3522", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14427", "date": null, "keywords": "equilibrium; extraction; liquid; polyphenols", "summary": "Nomenclature \ud835\udc4e\ud835\udc3e\ud835\udc3f\ud835\udc37\ud835\udc39 \u2013 Linear Driving Force mass transfer coefficient, 1/s \ud835\udc36 \u2013 concentration of polyphenols in solvent, g/L \ud835\udc36\u2217 \u2013 theoretical concentration of polyphenols in solvent in equilibrium with solid, g/L \ud835\udc36\ud835\udc52 \u2013 equilibrium concentration of polyphenols in solvent, g/L \ud835\udc360 \u2013 concentration of polyphenols in solvent at \ud835\udc61 = 0, g/L \ud835\udc58 \u2013 linear partition coefficient, L/g \ud835\udc40\ud835\udc46 \u2013 mass of solid matrix, g \ud835\udc5b\ud835\udc56 \u2013 number of samples collected during each kinetic run, - \ud835\udc5e \u2013 concentration of polyphenols in solid mass of hazelnut skins, g/g \ud835\udc5e\ud835\udc52 \u2013 equilibrium concentration polyphenols in solid mass of hazelnut skins, g/g \ud835\udc5e\ud835\udc61\ud835\udc5c\ud835\udc61 \u2013 total amount of extractable polyphenols in solid mass of hazelnut skins, g/g \ud835\udc61 \u2013 time, min \ud835\udc49\ud835\udc56 \u2013 volume of each sample collected during kinetic runs, \u00b5L \ud835\udc49\ud835\udc3f \u2013 volume of liquid solvent, L \ud835\udefc \u2013 solid-liquid ratio , g/L References Adebooye, O. C., Alashi, A. M., & Aluko, R. E. (2018). Experimental equilibrium data were fitted with the model, yielding \ud835\udc5e\ud835\udc61\ud835\udc5c\ud835\udc61 = 0.255 g/g and \ud835\udc58 = 0.0092 L/g as the total amount of extractable polyphenols in solid mass of hazelnut skins and the linear partition coefficient, respectively.", "mime": "application/pdf"}, {"id": "cet-14428", "words": "4294", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14428", "date": null, "keywords": "energy; olive; stone; \ud835\udc38\ud835\udc38\ud835\udc38\ud835\udc38\ud835\udc41\ud835\udc41\ud835\udc38\ud835\udc38\ud835\udc38\ud835\udc38\ud835\udc38\ud835\udc38", "summary": "The solid biomass residues from olive oil extraction process have become an important source of renewable energy and an economical alternative to traditional fossil fuels used for home heating, especially in rural areas (Khdair and Abu-Rumman, 2020). Instead, taking into consideration the separation phase with Po-DM, it can be seen that this constantly requires an additional power of around 8 kW (Psep equal to 18.21 \u00b1 0.47 kW) respect to that with Pa-DM (Psep equal to 8.21 \u00b1 0.47 kW), and that of the reference case (Psep equal to 8.71 \u00b1 0.54 kW).", "mime": "application/pdf"}, {"id": "cet-14429", "words": "3826", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14429", "date": null, "keywords": "atj; aviation; colombia; costs; fuel; gft; lca; material; price; production; saf; technology; usd", "summary": "Likewise, the Colombian Government will promote the development and use of sustainable aviation fuels SAF according to the National Development Plan 2022-2026(National Planning Department of Colombia, 2023). ASTM D7566 certification includes eight pathways for SAF production (American and Standard, 2020), although only three, Hydroprocessed Esters and Fatty Acids (HEFA), Alcohol to Jet (ATJ), and Gasification Fischer-Tropsch (GFT), are currently at a commercial scale(IRENA, 2021).", "mime": "application/pdf"}, {"id": "cet-14430", "words": "3719", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14430", "date": null, "keywords": "africa; analysis; ash; content; energy; food; management; msw; plastics; south; textiles; waste", "summary": "Keywords: Solid waste; municipal; classification; reuse 1. Introduction Household, commercial and industrial sources generate municipal solid waste (MSW), also known as garbage (Adhikari et al., 2018). The generation of municipal solid waste (MSW) has been consistently increasing due to various factors, such as the improvement of living standards, urban migration for employment opportunities, and, most notably, rapid population growth.", "mime": "application/pdf"}, {"id": "cet-14431", "words": "3739", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14431", "date": null, "keywords": "acid; biomass; et al; fermentation; process; production", "summary": "A critical review of the latest findings on succinic acid production from lignocellulosic biomass was discussed, by highlighting all the key aspects of optimization processes at different levels of the process from pre-treatment to succinic acid production. Certainly new studies and strategies are still needed to overcome the weaknesses of the whole process of succinic acid production from lignocellulosic biomass.", "mime": "application/pdf"}, {"id": "cet-14432", "words": "3314", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14432", "date": null, "keywords": "cellulose; fibers; figure; materials; paper; pretreatment; sheet; silk; waste", "summary": "In detail, the feasibility of upcycling silk waste was investigated and paper products containing silk fibers were formulated to realize worthy substitutes for plastic materials. In detail, silk fibers were added to the cellulosic matrix to obtain non-conventional sheets.", "mime": "application/pdf"}, {"id": "cet-14433", "words": "3270", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14433", "date": null, "keywords": "cellulose; coconut; contact; content; cores; fruit; materials; shells; surface", "summary": "Figure 1: Biosourced materials: a) palm kernels shells, b) coconut nucifera shells, c) canarium schweinfurthii fruit cores and d) fruit cores of raffia vinifera The plant shells and cores have not undergone any particular chemical treatment in order to preserve their natural character. It made it possible to identify the presence of chemical compounds characteristic of biosourced materials such as cellulose, hemicellulose and lignin.", "mime": "application/pdf"}, {"id": "cet-14434", "words": "2887", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-14434", "date": null, "keywords": "analysis; content; data; kazakhstan; lai; nitrogen; parameters; sensing; soil", "summary": "In a scientific study conducted on southern chernozems in Northern Kazakhstan, remote sensing data analysis methods were used to predict the content of NPK. Mathematical data processing: spatial analysis and validation of agrochemical soil analysis data with remote sensing data analysis, regression analysis of the data obtained.", "mime": "application/pdf"}, {"id": "cet-14435", "words": "2315", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14435", "date": null, "keywords": "biodiesel; dataset; diesel; distribution; microemulsions; model; water", "summary": "\u2022 The coalescence of water droplets is negligible. A CF < 1 ensures that the vortices formed in the agitation process have sufficient energy to break water droplets and produce suitable microemulsions.", "mime": "application/pdf"}, {"id": "cet-14436", "words": "3801", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14436", "date": null, "keywords": "assessment; biomass; biorefinery; ethanol; fuel; iii; production; saf; scenario; sugarcane", "summary": "Finally, it can be indicated that the availability of sugarcane in Brazil converts the country into a potentially essential participant for the deployment of large-scale projects for SAF production, which can reduce greenhouse gas emissions compared with the conventional kerosene production chain. This study focused only on the Climate Change impact category attributed to SAF production, considering the global warming potential within the Intergovernmental Panel on Climate Change's 100-year time horizon (GWP 100) (Bressanin et al., 2020).", "mime": "application/pdf"}, {"id": "cet-14437", "words": "3470", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14437", "date": null, "keywords": "bc0.30; biochar; ch4; co2; figure; pressure; sorption", "summary": "Byproducts of slow pyrolysis are pyrolysis oil (water, oxygenated and not organic compounds) and gas (H2, CO, CO2 CH4 and C2-C3) (Park et al., 2012). Enhancement of CO2 adsorption on biochar sorbent modified by metal incorporation.", "mime": "application/pdf"}, {"id": "cet-14438", "words": "2906", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14438", "date": null, "keywords": "catalysts; hmf; hnb; holocellulose; niobium; pnb", "summary": "Figure 1: Yields for glucose and HMF (g/Kg) obtained used catalysts PNb (black rectangles), HNb (red circles), and HPNb (blue triangle) at temperatures of 150\u00b0C (A and B), 175\u00b0C (C and D) and 200\u00b0C (E and F). 87 Figure 2: Yields for xylose and FF (g/Kg) obtained used catalysts PNb (black rectangles), HNb (red circles), and HPNb (blue triangle) at temperatures of 150\u00b0C (A and B), 175\u00b0C (C and D) and 200\u00b0C (E and F).", "mime": "application/pdf"}, {"id": "cet-14439", "words": "3564", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14439", "date": null, "keywords": "adsorption", "summary": "[\ud835\udc64 \u2212 \ud835\udc62(1, \ud835\udf0f)] (3) with boundary and initial conditions given by: \ud835\udf15\ud835\udc62 \ud835\udf15\ud835\udc65 = \ud835\udefd \u2219 (\ud835\udc64 \u2212 \ud835\udc62) at \ud835\udc65 = 1 \ud835\udf0f > 0 (4) \ud835\udf15\ud835\udc62 \ud835\udf15\ud835\udc65 = 0 at \ud835\udc65 = 0 \ud835\udf0f > 0 (5) \ud835\udc62 = 0 at \ud835\udf0f = 0 0 \u2264 \ud835\udc65 \u2264 1 (6) \ud835\udc56 = \ud835\udc62\ud835\udc56 \u2032 = 0 \ud835\udc56 = 0 or \ud835\udc65 = 0 (13) ( \ud835\udf15\ud835\udc62 \ud835\udf15\ud835\udc65 )| \ud835\udc56 = \ud835\udc62\ud835\udc56 \u2032 = \ud835\udefd \u2219 (\ud835\udc64 \u2212 \ud835\udc62\ud835\udc56) \ud835\udc56 = \ud835\udc41 or \ud835\udc65 = 1 (14)", "mime": "application/pdf"}, {"id": "cet-14440", "words": "4156", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14440", "date": null, "keywords": "biomass; glycerol; growth; mhb; microalgae; production; vulgaris", "summary": "Conclusions The study investigated BWW as an organic waste source to enhance biomass production and FAME profiles in C. vulgaris with the addition of glycerol under three different trophic modes. An initial examination of the saturated and unsaturated components of the FAME suggests that lipids extracted from C. vulgaris biomass cultivated mixotrophically and heterorophically in BWW could potentially serve as a valuable feedstock for biodiesel production.", "mime": "application/pdf"}, {"id": "cet-14441", "words": "4030", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14441", "date": null, "keywords": "candle; catalyst; content; filter; gas; nm3; tar", "summary": "Table 1: Characterisation of catalytic filter candles of different design Design Fixed bed Catalytic layer Fixed bed Fixed bed Notation FB60_MgNi CL60_ MgAlNi (2 CL) FB60N FB70N OD/ID candle / 60/40/20 60/40/16 60/40/20 70/50/30 OD tube Catalyst filling / layer Catalyst name MgO-NiO (0.1 \u2013 0.3 mm) n. a. MgO-Al2O3- NiO + MgO- Al2O3-NiO n. a. MgO- Al2O3- NiO (0.25 \u2013 0.5 mm) C&CS # 1050 B MgO- Al2O3- NiO (0.25 \u2013 0.5 mm) C&CS Based on the surface area value of this type of catalytic filter candle with a filtration length of 381 mm (s. Table 1) the appropriate surface area of a candle with a filtration length of 398 mm would exhibit a value of 843 m2.", "mime": "application/pdf"}, {"id": "cet-14442", "words": "3617", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14442", "date": null, "keywords": "biomass; biorefinery; cutting; harvest; lpc; processing; protein; time", "summary": "This research aimed to contribute valuable insights for implementing efficient and sustainable processes in green biorefineries to maximize protein yields from fresh biomass. The authors acknowledge the financial support from GO-GRASS (European Union\u2019s Horizon 2020 Research and Innovation program, grant agreement No 862674), and Gr\u00e6s-Prof \u2013 Value creation with grass protein (GUDP Danish National funding, grant agreement", "mime": "application/pdf"}, {"id": "cet-14443", "words": "2883", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14443", "date": null, "keywords": "catalyst; conversion; gas; h2s; ppmv; reforming; steam; tar", "summary": "The enhanced tar reforming activity exhibited by the novel catalyst can be attributed to the increased BET surface area (approximately four times greater than that of conventional tar steam reforming catalysts) and the increase in density of NiO. Novel catalyst performance as function of temperatures at different conditions (Tests #7, #8 and #9: tar content = 13.7 g/Nm3, H2Seq = 50 ppmv; GHSV = 13000 h-1; Tests #10, #11 and #12: tar content = 13.7 g/Nm3, H2Seq = 100 ppmv; GHSV = 6000 h-1)", "mime": "application/pdf"}, {"id": "cet-14444", "words": "3463", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14444", "date": null, "keywords": "biomass; conversion; energy; htc; hydrochar; process; recirculation; recovery; solvent", "summary": "The improvement in HY during consecutive PW recirculation, could be due to the progressive accumulation in the reused solvent of soluble conversion intermediates by hydrolysis and dehydration reactions. The effects of temperature, solid load and consecutive conversion phases on PW recirculation were assessed by using Ferula Communis plant residues as feedstock in HTC experiments.", "mime": "application/pdf"}, {"id": "cet-14445", "words": "3240", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14445", "date": null, "keywords": "energy; hydrochars; hydrothermal; increase; mass; particles; pbat", "summary": "130 Figure 1: Complex viscosity as a function of the frequency of neat PBAT e PBAT containing 10 wt% of hydrochar particles Figure 2a-c shows the values of the main mechanical properties, i.e. Young modulus, tensile strength and elongation at break, of neat PBAT and PBAT containing HCCF200, HCCF250 and HCCF280. Figure 2: (a) Young modulus, (b) Tensile strength and (c) Elongation at break of neat PBAT e PBAT continuing 10wt% of hydrochar particles (HC) 131 4.", "mime": "application/pdf"}, {"id": "cet-14446", "words": "3900", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14446", "date": null, "keywords": "carbon; catalysts; czan-3; liquid; pdo; products; propanone; selectivity", "summary": "Based on the TPR profiles, reduction temperatures were chosen for the complete reduction of copper, and the CZAN-1, CZAN-2, and CZAN-3 catalysts were activated at 375, 400, and 340 \u00baC respectively. The third most generated compound in the CZAN-2 and CZAN-3 catalysts has been 2-propanol, with a carbon selectivity of 11.8 and 7.5 %, respectively.", "mime": "application/pdf"}, {"id": "cet-14447", "words": "3423", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14447", "date": null, "keywords": "char; pyrolysis; simulation; temperatures; xylan; yields", "summary": "Figure 3: Co-pyrolysis product yields obtained via simulation: (a) bio-oil, (b) char, (c) wax, and (d) gas yields. The simulation aimed at representing the main co-pyrolysis phenomena using a hybrid equilibrium-kinetic approach and properly predicting pyrolysis yields.", "mime": "application/pdf"}, {"id": "cet-14448", "words": "3470", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14448", "date": null, "keywords": "analysis; biomass; composition; groups; lignin; oil; pyrolysis; simulation", "summary": "Conclusions This paper studied, using a rigorous kinetic-approach simulation and multivariate analysis, the relationship between biomass and FP bio-oil composition to recommend feedstock selection aiming to produce high-value functional groups. A rigorous kinetic simulation was built in Aspen PlusTM v.10 and used to obtain a dataset correlating biomass compositions from 60 sources and bio-oil functional groups.", "mime": "application/pdf"}, {"id": "cet-14449", "words": "3400", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14449", "date": null, "keywords": "area; beef; cattle; ethanol; integration; livestock; mus$; opex; production; sugarcane; system; y-1", "summary": "i261185@dac.unicamp.br Due to the expansion of ethanol production, debate on conflicting issues regarding land use competition between biofuels and food production is raised. Integrated sugarcane/livestock systems could potentially facilitate the expansion of ethanol production without putting crop and/or livestock production at risk and displacing areas covered with natural vegetation.", "mime": "application/pdf"}, {"id": "cet-14450", "words": "3568", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14450", "date": null, "keywords": "bed; biochar; cfb; feed; gasification; gasifier; reformer; temperature", "summary": "The operation of the gasifier was rather unstable in the last setpoint, which was observed as very large variation in bed temperatures and bed pressure drops. 1/3S+2/3D 0.25 1.67 0 0 3.0 3.5 882 895 2.6 2.9 46.7 S 0.25 0.91 0 0.6 4.2 2.0 740 825 1.3 2.3 41.6 S 0.5 0.61 0 0.89 4.2 1.7 704 826 1.0 2.2 38.1 S 0.5 0.41 0 1.29 4.2 1.7 706 863 0.93 2.2 37.2 - 0 0.29 0 1.34 4.2 1.7 661 859 0.86 2.2 37.2 Dry gas composition, vol% CO CO2 H2 N2 (as difference) CH4 C2Hy C3-C5Hy H2O in wet gas, vol% 16.3 22.6 27.5 28.4 4.19 1.01 0 32.2 12.2 20.3 18.3 42.2 4.46 1.53 0.02 27.9 13.0 20.0 16.8 44.3 4.46 1.45 0.02 29.3 14.0 19.1 18.6 43.3 3.90 1.02 0 31.9 13.7 18.8 18.7 44.0 3.78 0.98 0 31.6 Tars + benzene, g/m3 STP 10.5 14.9 14.3 9.3 9.3 Filter temperature, \u00b0C Dust content in filter inlet, g/m3 STP Filter pressure drop, mbar Filter face velocity, cm/s 550 25 27 1.8 548 38 35 1.6 548 64 39 1.4 522 90 36 1.4 516 65 36 1.4 C-conversion to gas and tars, % 93.5 85.7 75.5 67.5 66.6 * S + P3: The mixture of sand and Myanit limestone, ** STP: at 273.15 K and 101,325 kPa Figure 4: Carbon conversions in BCFB gasification tests.", "mime": "application/pdf"}, {"id": "cet-14451", "words": "3002", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14451", "date": null, "keywords": "acid; carbon; chain; fatty; oil; properties; surfactants; water", "summary": "The transmittance of surfactants solutions in SN-150 base oil shown in Figure 2. Figure 2: Transmittance of surfactants solutions in SN-150 base oil For the surfactant synthesized from the fatty acid containing a double bond, a significant leap was consistently found compared to saturated fatty acids based ones.", "mime": "application/pdf"}, {"id": "cet-14452", "words": "3367", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14452", "date": null, "keywords": "analysis; destruction; exergy; gas; heat; htg; process; system", "summary": "kJ/kg FEED 3661.96 155.82 72.33 22.83 7.92 Figure 3: Exergy efficiency of process units calculated from exergy analysis However, HTG process is very energy sensitive and needs a good strategy of process and heat integration.", "mime": "application/pdf"}, {"id": "cet-14453", "words": "3872", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14453", "date": null, "keywords": "acetaldehyde; biorefinery; capex; electricity; ethanol; gas; maciel; process; production; scenario; sugarcane", "summary": "Moreover, sugarcane ethanol production is a more mature process nowadays, delivering a low-cost renewable chemical. Bearing all this in mind, this work analyzes the viability of the production of acetaldehyde via oxidation of sugarcane ethanol.", "mime": "application/pdf"}, {"id": "cet-14454", "words": "4086", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14454", "date": null, "keywords": "asa; coating; coupons; hydrogel; nylon; samples; substrate; surface; swelling; water", "summary": "This study aimed to analyse and compare the effects of dip-coating with cellulose hydrogel coupons of Acrylonitrile Styrene Acrylate (ASA), polyamide (Nylon\u00ae), and Tritan\u00ae to produce hydrophilic structures for water uptake from fuels. Therefore, it must be considered that systems utilizing materials coated with hydrogel films exhibit different performance characteristics compared to those using hydrogel particles.", "mime": "application/pdf"}, {"id": "cet-14455", "words": "3960", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14455", "date": null, "keywords": "biodiesel; cellulose; hydrogel; ipn; network; sodium; swelling; synthesis; water", "summary": "However, cellulose hydrogels have limitations such as reduced hydrophilicity and moderate swelling capacity compared to synthetic polymeric hydrogels (Qureshi et al., 2020). This manuscript suggests an innovative alternative to improve the hydrophilicity of cellulose hydrogels: the addition of a second network using sodium acrylate to create an Interpenetration Polymeric Network (IPN).", "mime": "application/pdf"}, {"id": "cet-14456", "words": "3085", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14456", "date": null, "keywords": "catalyst; digestate; energy; htg; process; simulation; sludge", "summary": "Figure 1: A model of digestate sludge with copper nanoparticle (Cu-NP) catalyst used in ReaxFF MD simulation of HTG process. 195 (a) (b) Figure 3: Evolution of number of different gas molecules against the simulation time of HTG process at temperature T=3200K in the case without catalyst (a) and with Cu-NP catalyst (b).", "mime": "application/pdf"}, {"id": "cet-14457", "words": "3683", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14457", "date": null, "keywords": "figure; hydrogen; production; reaction; temperature; \ud835\udc41\ud835\udc36 \ud835\udc56=1", "summary": "These results are associated with the consumption of H2 to produce NH3 in isothermal systems and with a reduction in the equilibrium temperature for adiabatic systems. The results obtained demonstrated that the regions of greatest hydrogen formation were at high temperatures (\u2265 900 K) and at the lowest pressures tested (5 bar for PR; 230 bar for SCWG and 1 bar for the other thermochemical routes).", "mime": "application/pdf"}, {"id": "cet-14458", "words": "3299", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14458", "date": null, "keywords": "biomass; feed; formation; gasification; hydrogen; liquor; process; products; temperature; water", "summary": "Higher hydrogen formation rates (67.33%) are achieved at elevated temperatures (800 \u00b0C), low pressures (220 bar), and low concentrations of black liquor in the process feed (0.60% wt), indicating a strong demand for water in facilitating this process when characterized for hydrogen formation. Thermodynamic approach results indicate that temperature increases tend to maximize hydrogen formation, an expected outcome considering that reactions with higher hydrogen formation indices are endothermic.", "mime": "application/pdf"}, {"id": "cet-14459", "words": "3499", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14459", "date": null, "keywords": "co2; coal; emissions; pellets; power; production; value", "summary": "This estimation is based on yield data indicating 2.09 kg of sawdust per kg of black pellets coal (del Alamo Serrano and Tran\u00e5s, 2019). Various methods, including steam explosion (Arbaflame), torrefaction under pressurized steam (conducted at 245-265 \u00b0C, 10-39 bar) (Kudo et al., 2019), steam torrefaction (experiments at 245-265 \u00b0C) (Arteaga-P\u00e9rez et al., 2017), and steam treatment (Valmet) are employed in black pellet production.", "mime": "application/pdf"}, {"id": "cet-14460", "words": "3079", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14460", "date": null, "keywords": "activation; adsorption; apbc-2s; biochar; chemical; lignocellulosic; step; surface", "summary": "3.1 Characterization of adsorbents Morphology of activated biochar samples was analysed by scanning electron microscopy (SEM) and the obtained images corresponding to APBC-1S and APBC-2S are presented in Figure 1. Thus, the one-step route leaded to biochar samples with higher percentages of carbon, as the total thermochemical treatment was considerable shorter than the one of the 2-step route.", "mime": "application/pdf"}, {"id": "cet-14461", "words": "3093", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14461", "date": null, "keywords": "biomass; co2; dme; gasification; polygeneration; reactor; steam; syngas; system", "summary": "For each diameter, the length (Leq) at which dyP/dz falls below a specific equilibrium tolerance (e.g., 1% in this study) is determined and a regression analysis is performed to establish a power relationship between reactor diameter and the equilibrium length as reported in Table 4, condition n\u00b06. The sizing method considers some relevant guidelines for good industrial practice in reactor dimensioning (e.g., Woods, 2007) and chemical engineering considerations, as reported in Table 3: Table 3: Guidelines for good industrial practice of fixed bed catalytic reactors (adapted from: Woods, 2007).", "mime": "application/pdf"}, {"id": "cet-14462", "words": "3196", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14462", "date": null, "keywords": "biochar; litter; potential; poultry; production; pyrolysis; qatar; usd", "summary": "Figure 1: A simplified flow diagram illustrating poultry litter pyrolysis process. Table 2: Typical characteristics of poultry litter waste in Qatar.", "mime": "application/pdf"}, {"id": "cet-14463", "words": "3046", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14463", "date": null, "keywords": "clover; fructose; juice; protein; red; ryegrass; sugar; xylose", "summary": "Besides, maltose and galactose presented low concentrations in BJ biomasses. Maltose and galactose presented low concentrations in BJ biomasses.", "mime": "application/pdf"}, {"id": "cet-14464", "words": "2319", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14464", "date": null, "keywords": "biorefinery; bsfl; cheese; larvae; products; treatment; waste; whey", "summary": "However, cheese whey has not been investigated as a single process or under a biorefinery scheme. Therefore, this work presents a biorefinery design for cheese whey using a biological process, such as BSFL (Figure 1).", "mime": "application/pdf"}, {"id": "cet-14465", "words": "3256", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14465", "date": null, "keywords": "analysis; chemical; drying; energy; method; sewage; sludge; treatment; value", "summary": "To assess the potential for using sewage sludge as an energy source, various analyses were carried out for its characterization, such as proximate and ultimate analysis, calorific value determination, granulometric analysis, and surface adhesion tension. According to Menezes (2022), sewage sludge is an unavoidably generated residue during various stages of sewage treatment, including the preliminary stage (removal of some solid by-products from sewage), primary stage (removal of sedimentable and floating solids through physical processes), secondary stage (removal of organic matter and some nutrients through biological processes), and tertiary stage (removal of specific contaminants through physicochemical processes).", "mime": "application/pdf"}, {"id": "cet-14466", "words": "4011", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14466", "date": null, "keywords": "biomass; hydrogen; microwave; oil; pyrolysis", "summary": "Most of the existing studies on hydrogen production from biomass are focused on gasification, while only a notable few studies are related to hydrogen production from biomass pyrolysis. The formation of phenols can be related to the interaction of moisture/steam with aromatics produced during biomass pyrolysis (Mukarakate et al., 2015).", "mime": "application/pdf"}, {"id": "cet-14467", "words": "3512", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14467", "date": null, "keywords": "anaerobic; biochar; digestion; hydrochar; methane; process; production; sewage; sludge", "summary": "Another approach involves hydrothermal carbonization (HTC) and the production of hydrochar (HY), with the combined AD+HTC process aiming to reduce sludge production and enhance biogas production (Ferrentino, Merzari, Fiori, & Andreottola, 2020). The solid HTC by-product seems to be a good accelerator of methane production.", "mime": "application/pdf"}, {"id": "cet-14468", "words": "3215", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14468", "date": null, "keywords": "cmf; conversion; kinetic; mmf; model; reaction; scheme; yield", "summary": "The main results, in terms of CMF conversion, CMFA, MMF, MMFA, and LM yields, are reported in Figure 1 at all the tested temperatures. The CMF conversion in each batch increased over time, with the testing temperature, and it was complete in all the cases after 4 h. Figure 1 \u2013 CMF conversion (\u03b5CMF) and product yields (Yi) at a) 10, b) 20, c) 40, and d)", "mime": "application/pdf"}, {"id": "cet-14469", "words": "3447", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14469", "date": null, "keywords": "biomass; chemical; conversion; data; design; modelling; models; process; pyrolysis; scale; sub", "summary": "The first part reviews the state-of-the-art of strategies and approaches for the modelling of biomass conversion processes by highlighting the benefits and drawbacks of short-cut, data-driven, and rigorous models (Martin et al., 2023). The development of rigorous models is time-consuming and requires large datasets for validation.", "mime": "application/pdf"}, {"id": "cet-14470", "words": "3135", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14470", "date": null, "keywords": "co2; dme; methanol; pressure; reaction; synthesis; temperature", "summary": "After thermodynamic analysis, we directed the focus towards process simulation in Aspen Plus for a better understanding of the overall process for DME synthesis. Subsequently, methanol undergoes dehydration in reaction (7) with DME synthesis catalysts.", "mime": "application/pdf"}, {"id": "cet-14471", "words": "3537", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14471", "date": null, "keywords": "agcl; bias; dha; glycerol; production; tio2", "summary": "https://doi.org/10.1149/2.0601704jes Verma, A. M., Laverdure, L., Melander, M. M., & Honkala, K. (2022). Conversely, at higher pH, the faradaic efficiency towards DHA, GA, and CO2 decreased, while the photocurrent increased.", "mime": "application/pdf"}, {"id": "cet-14472", "words": "3655", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14472", "date": null, "keywords": "abv; compounds; conditions; cost; distillation; ethanol; fermentation; process; productivity; simulation; soursop; yeast", "summary": "Reduced pression [mBar] Rotation speed [RRU] %ABV Productivity [L/h]. Productivity and b) %ABV.", "mime": "application/pdf"}, {"id": "cet-14473", "words": "4064", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14473", "date": null, "keywords": "concentration; et al; extracts; sargassum; sulfates", "summary": "On the other hand, in the synthesis of silver and cadmium sulfide nanoparticles, values of 0.034 and 3.2 mM FRAP respectively, have been reported (Loa et al., 2023; Phongtongpasuk et al., 2016). Therefore, some species of sargassum, since they are a rich source of antioxidants, are used in nanobiotechnology for the synthesis of different nanomaterials, by using bioactive compounds (reducing agents) for the nanoparticles synthesis (Flieger et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14474", "words": "3654", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14474", "date": null, "keywords": "bacillus; conditions; cost; et al; growth; medium; phb; phb production; production", "summary": "Luvizetto-Faccin et al. (2013) and Mohanrasu et al. (2020) have emphasized that an adequate relationship between carbon and nitrogen in the culture medium is essential to promote PHB production by B. megaterium; as reported, the carbon source should be present in excess compared to nitrogen, to enhance high PHB production yields; if this does not happen, the carbon present will be only used for bacterial growth. PHB production was improved up to three times with a C/N ratio of 16:1.", "mime": "application/pdf"}, {"id": "cet-14475", "words": "2753", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14475", "date": null, "keywords": "mixtures; oil; polymer; recovery; size; solutions; surfactant; viscosity", "summary": "Hamouma M., Delbos A., Dalmazzone C., Colin A., 2021, Polymer surfactant interactions in oil enhanced recovery processes, Energy & Fuels, 35(11), 9312-9321. The concentrations used were 15 g/L for surfactants and 1 g/L for polymer solutions.", "mime": "application/pdf"}, {"id": "cet-14476", "words": "4443", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14476", "date": null, "keywords": "content; crude; ethanol; extraction; lipid; rambutan; rambutan seed; scco2; seed", "summary": "Rambutan seed lipids contain 33.35\u201346.64 g/100 g fat of oleic acid and 26.03\u201334.36 g/100 g fat of arachidic acid as the major fatty acids (Afzaal et al., 2023; Jahurul et al., 2020). This work introduces a defatting method for rambutan seed lipid that uses mechanical and supercritical fluid extractions (SFE).", "mime": "application/pdf"}, {"id": "cet-14477", "words": "3814", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14477", "date": null, "keywords": "biogas; energy; olive; phase; production; sample; waste", "summary": "Moreover, it aims to quantify the benefits introduced, in terms of biogas production, related to the addition of pomace to the digestate inoculation. In particular, the OP-PH waste led to the best performance for biogas production: 2.94 kJ were produced, against 1.67 kJ, obtained with the presence of untreated OP, and 0.88 and 1.09 kJ were achieved with the other samples.", "mime": "application/pdf"}, {"id": "cet-14478", "words": "3584", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14478", "date": null, "keywords": "biomass; chlorella; culture; growth; light; microalgae; sunscreen; vulgaris", "summary": "Ariede, M. B., Candido, T. M., Jacome, A. L. M., Velasco, M. V. R., de Carvalho, J. C. M., & Baby, A. R., 2017, Cosmetic attributes of algae - A review, Algal Research, 25, 483-487. Huang, J. J., Bunjamin, G., Teo, E. S., Ng, D. B., & Lee, Y. K., 2016, An enclosed rotating floating photobioreactor (RFP) powered by flowing water for mass cultivation of photosynthetic microalgae, Biotechnology for Biofuels, 9, 1-18.", "mime": "application/pdf"}, {"id": "cet-14479", "words": "3504", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-14479", "date": null, "keywords": "bagasse; compounds; corrosion; corrosion inhibitors; extraction; inhibition; inhibitors; sugarcane; sugarcane bagasse", "summary": "334 Figure 4: Network of bibliographical references on sugarcane bagasse corrosion inhibitors. Evolution of the state of the art in bagasse corrosion inhibitors: A bibliometric view The interest in the development of eco-friendly corrosion inhibitors derived from sugarcane bagasse has been growing in the scientific community in recent years.", "mime": "application/pdf"}, {"id": "cet-14480", "words": "3840", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14480", "date": null, "keywords": "analysis; atj; costs; factor; gft; production; sensitivity; usd; value", "summary": "2.2 Factors: Factors are used to find the MFSP or LCA, this calculation has four parts as mentioned before: feedstock, CSP, biorefinery and transport, every factor is multiplied with the respective optimized facility capacity and allocation factor, and in the case of transport with the distance found for the optimization tool, the factors for MFSP are the ones related with costs, and for LCA related with eqCO2 emissions. The main factors for the routes mentioned before are allocation factor, a factor that reduces the total cost by distributing the cost to other by-products, conversion of the route like the mass of bio-jet that can be obtained for the mass of feedstock, farmgate price(Shahriar and Khanal, 2022), the price of the feedstock, OPEX and CAPEX operation, and capital expenditures(Capaz et al., 2020).", "mime": "application/pdf"}, {"id": "cet-14481", "words": "4519", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14481", "date": null, "keywords": "et al; frass; larvae; r c; reduction; waste", "summary": "The percentage of organic solid waste reduction with BSF larvae is between 60-68% (%DM) Introduction The demographic, economic and industrial expansion of recent times is related to the generation of solid waste, since its origin from households, industries and constructions is increasing (Niu et al., 2023; Shah et al., 2023).", "mime": "application/pdf"}, {"id": "cet-14482", "words": "3440", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14482", "date": null, "keywords": "content; european; extraction; hazelnut; shell; table; tannins", "summary": "\ud835\udc3f\ud835\udc5c\ud835\udc60\ud835\udc61 \ud835\udc64\ud835\udc52\ud835\udc56\ud835\udc54\u210e\ud835\udc61 % = \ud835\udc35\u2212\ud835\udc37 \ud835\udc35 \ud835\udc65 100 % (3) \ud835\udc49\ud835\udc5c\ud835\udc59\ud835\udc4e\ud835\udc61\ud835\udc56\ud835\udc59\ud835\udc52 \ud835\udc5a\ud835\udc4e\ud835\udc61\ud835\udc61\ud835\udc52\ud835\udc5f % = 1 \u2212 \ud835\udc3f\ud835\udc5c\ud835\udc60\ud835\udc61 \ud835\udc64\ud835\udc52\ud835\udc56\ud835\udc54\u210e\ud835\udc61 (4) where B is the oven dry mass of sample (g), D is the weight of residue after heating (g). \ud835\udc34\ud835\udc60\u210e \ud835\udc36\ud835\udc5c\ud835\udc5b\ud835\udc61\ud835\udc52\ud835\udc5b\ud835\udc61 \ud835\udc3c % = \ud835\udc36 \ud835\udc35 \ud835\udc65 100 % (2) where C is weight of ash (g) and B is weight of oven-dry sample (g).", "mime": "application/pdf"}, {"id": "cet-14483", "words": "3691", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14483", "date": null, "keywords": "acid; concentration; glucose; production; strain; succinogenes; test", "summary": "This strain is an anaerobic facultative so it can grow under oxidative conditions, but in that conditions unwanted by-products as lactic acid can be produced that decreased succinic acid concentration. Some works were published on different fermentation strategies, batch tests on succinic acid production starting from single and mixed sugars (Molino et al., 2020), fed batch tests (Hoefel et al., 2012) that were the most common approaches; furthermore, continuous succinic acid production by immobilized cells was developed (Ercole et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14484", "words": "3719", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14484", "date": null, "keywords": "analysis; biomass; cm-1; content; digestion; grass; hemicellulose; lignin; production; sample", "summary": "Some cellulose, hemicellulose, and lignin characteristics of VG biomass cultivated in India were 39.11 %, 48.57 %, and 11.02 %, respectively (Thakur et al., 2018). This is because the hard structure of high lignin content biomass makes it difficult to be converted by the anaerobic consortium, resulting in decreased biogas output (Ma et al., 2019).", "mime": "application/pdf"}, {"id": "cet-14485", "words": "4185", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14485", "date": null, "keywords": "biochars; biomass; catalysts; high; hydrogenation; metal; pyrolysis; support; surface; waste", "summary": "It can be postulated that biomass wastes properly treated with pyrolysis can not only be recycled but also upgraded. Therefore, one of the main challenges for scientists nowadays is to provide the chemical industry with new tools to upgrade waste biomasses.", "mime": "application/pdf"}, {"id": "cet-14486", "words": "3834", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14486", "date": null, "keywords": "bed; cake; cherry; et al; feedstocks; sand; torrefaction", "summary": "They represent potential feedstocks for fluidized bed torrefaction that are new (e.g., Spent lemon peels) or unconceivable (e.g., Dry tomato seeds) so far for such an application; in addition, they are unpractical for direct fluidized torrefaction because of the high content of liquids (e.g., Spent lemon peels and Industrial cherry cake) or the challenging shape, either irregular (e.g., Spent lemon peels) or fibrous (e.g., Industrial cherry cake), as it can be seen in Figure 1. The tests with Lemon Peels and Tomato Seeds simply had a preliminary and exploratory character, basically just to assess the feasibility of fluidized bed torrefaction of such \u201cnew\u201d feedstocks.", "mime": "application/pdf"}, {"id": "cet-14487", "words": "3962", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14487", "date": null, "keywords": "contact; energy; films; peg; properties; surface", "summary": "The addition of larger amount of PEG into HM films increases significantly the clusters size and an average value of 70 nm is measured for 40% of PEG. Figure 4: Effect of stearic acid and polyethylene glycol content on nano-adhesion and nano-friction of HM films.", "mime": "application/pdf"}, {"id": "cet-14488", "words": "4441", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14488", "date": null, "keywords": "biocrude; biomass; htl; hydrothermal; liquefaction; microalgae; min; phase; reaction; reactor; temperature; yield", "summary": "The aim of this study is to investigate the impact of key variables, namely temperature (240-300 \u00baC), initial biomass load (5-15 % w/w), and reaction time (20-60 min), on biocrude yields and their higher heating value (HHV). Secondary degradation and Boudouard gas reactions are the main mechanisms for reducing biocrude yield at higher temperatures (Brindhadevi et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14489", "words": "4105", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-14489", "date": null, "keywords": "biomass; catalysts; chemical; conversion; energy; oil; processes; production; pyrolysis; waste", "summary": "This review examines recent advances in biomass conversion processes, including both thermochemical and biochemical techniques. Using biomass waste for fuel and chemicals isn't new but is inefficient.", "mime": "application/pdf"}, {"id": "cet-14490", "words": "3373", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14490", "date": null, "keywords": "biocrude; biomass; hhv; htl; hydrothermal; liquefaction; reaction; temperature; yield", "summary": "Moreover, higher reaction times do not lead to an increase in HHV (see Figure 2B). At intermediate conditions, Niaz et al. (2020) studied HTL of Saccharina japonica obtaining a yield of 20.3% at 300\u00baC, 60 minutes and 9% of biomass loading, and Crespo et al. (2021) obtained the highest yield (10.25%) at temperatures of 300\u00b0C, reaction times of 60 min and Sargassum polyceratium biomass loading of 10%.", "mime": "application/pdf"}, {"id": "cet-14491", "words": "4275", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14491", "date": null, "keywords": "acid; autohydrolysis; cellulose; lignin; organosolv; process; recovery; solid; treatment", "summary": "al. (2022) where similar conditions were found in high cellulose recovery. These conditions were selected with the goal of almost completely degrading hemicellulose while maximizing cellulose recovery.", "mime": "application/pdf"}, {"id": "cet-14492", "words": "3628", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14492", "date": null, "keywords": "fermentation; growth; heat; production; scale; ssf; temperature; values; waste", "summary": "The literature indicates several advantages of SSF compared to traditional submerged fermentation, such as the potential to use solid wastes in the circular economy framework, and the absence of foaming during fermentation, the latter particularly important for the case of BSs production. In this work, we assessed the potential of different types of organic solid waste including food and cosmetic industry waste such as oil cakes, agricultural byproducts, or cosmetic-derived sludge.", "mime": "application/pdf"}, {"id": "cet-14493", "words": "2759", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14493", "date": null, "keywords": "alcohols; bio; crude; cyclic; reaction; step; wzr", "summary": "Table 3: Quantity of acid sites on the catalysts measured using NH3-TPD Catalyst Quantity of acid sites (mmol\u00b7g-1) HY 0.988 H\u03b2 0.729 WZr 0.164 S-ZrO2 0.557 \u03b3-Al2O3 0.335 SiO2-Al2O3 0.439 417 The third step reaction, designed to hydrodeoxygenate the products of second step reaction, was performed using Ru/WZr (Figure 6). Figure 3: GC-MS results for the third step hydrodeoxygenation of second step product prepared using HY30.", "mime": "application/pdf"}, {"id": "cet-14494", "words": "3585", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14494", "date": null, "keywords": "agro; biomass; biorefinery; chains; industrial; italy; products; project; supply; tomato; wine", "summary": "Indeed, the study of processes having the purpose of converting the residues from the above-mentioned transformations into advanced biofuels (biomethane) and agricultural products (e.g. soil improver and bio-stimulants) are also included in the project\u2019s scope. In addition, other products considered are lignin-based biomaterials, biomethane, and biochar.", "mime": "application/pdf"}, {"id": "cet-14495", "words": "3644", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14495", "date": null, "keywords": "ch4; h2o; hydrate; phase; \ud835\udc47 \ud835\udc470", "summary": "Therefore, this study presents a rigorous analysis of hydrate phase equilibrium in systems composed of carbon dioxide (CO2), methane (CH4), propane (C3H8) and glycerol (C3H8O3). Validation of the results was carried out by comparing the results obtained in this work with experimental phase equilibrium studies available in the literature.", "mime": "application/pdf"}, {"id": "cet-14496", "words": "3759", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14496", "date": null, "keywords": "bitumen; carbon; char; oil; pyrolysis; samples; wt.%", "summary": "Other elements (wt.%) RDF-char 30.9 0.28 0.29 0.53 67.9 RDF-oil 61.4 10.3 0.70 n.d. 21.6 WT-char 88.8 0.03 0.10 3.20 7.87 WT-oil 75.2 9.40 0.20 n.d. 15.2 LP-char 55.9 0.65 0.35 n.d. 43.1 SC-char 70.8 1.50 8.50 n.d. 19.2 RH-char 44.5 1.10 - n.d. 54.4 Figure 2: TG curves (air, 40 mL/min, HR=10\u00b0C/min) of char samples (left) and oil samples (right). The feedstocks used to produce bitumen additives by pyrolysis process were two civil wastes (refuse derived fuel (RDF) and scraped waste tires (WT)), and three agricultural/aquaculture wastes (lemon peels (LP), rice husk (RH) and shrimp-derived chitosan (SC)).", "mime": "application/pdf"}, {"id": "cet-14497", "words": "3878", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14497", "date": null, "keywords": "bolivia; carbon; crop; emissions; energy; ethanol; ghg; potential; sugarcane; use", "summary": "Fermentation, 8(5), Article 5. https://doi.org/10.3390/fermentation8050226 Erdiwansyah, Mamat, R., Sani, M. S. M., Sudhakar, K., Kadarohman, A., and Sardjono, R. E. (2019). GHG emissions, which have increased by 75 % since the 1970s, include carbon dioxide, methane, and nitrous oxide (Battaglia et al., 2022).", "mime": "application/pdf"}, {"id": "cet-14498", "words": "4313", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14498", "date": null, "keywords": "air; appliances; biomass; combustion; emissions; fuel; gas; heating; lpg; nox; study", "summary": "It is seen that in line with the main factors influencing the environmental and energy performance of the residential heating appliances (i.e., fuel quality, appliance technology, operating conditions, user behavior, appliance and stack maintenance conditions) technology oriented strategies such as \u201ctechnological turnover\u201d of biomass appliances (i.e., replacement of existing biomass heating appliances with 5-star pellet appliances) would bring an important reduction in PM emissions (93%) but would not be completely effective since no significant benefit is seen for NOx emission when transitioning to advanced biomass appliances. However, taking into account adverse effects of biomass combustion emissions on human health and heavy impact on air quality 445 (Naeher et al., 2007) an alternative scenario involving a fuel switch (i.e., from solid biomass to gaseous fuel) is also conceived.", "mime": "application/pdf"}, {"id": "cet-14642", "words": "3499", "extension": ".pdf", "flesch": "21", "author": null, "title": "cet-14642", "date": null, "keywords": "framework; management; process; process safety; process security; resilience; risk; safety; security", "summary": "This paper draws upon a foundational systematic literature review and preliminary survey results to propose a resilience-based integrated framework for process safety and process security risk management. This multifaceted strategy is foundational to fostering a resilient environment conducive to integrating process safety and process security risk management, setting the stage for the STAMP- based integrated framework discussed in subsequent sections.", "mime": "application/pdf"}, {"id": "cet-14643", "words": "3888", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14643", "date": null, "keywords": "cities; city; city resilience; concept; factors; indicators; infrastructure; measures; resilience", "summary": "As in the mentioned disciplines, there is no single definition of Smart City resilience. This broad perception of the issue has resulted in the development of a number of indicators that authors have used to characterise and potentially assess Smart City resilience (Ha-Mim, 2024; Patel and Nosal, 2016; Taghizadeh, 2015).", "mime": "application/pdf"}, {"id": "cet-14644", "words": "3498", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14644", "date": null, "keywords": "assessment; et al; events; natech; process; resilience", "summary": "146 3. Results 3.1 Bibliometric analysis A specific bibliometric analysis was used to identify connections among emerging topics and research interest in the framework of quantitative resilience assessment of industrial plants to Natech events. Generic metrics and quantitative approaches for system resilience as a function of time.", "mime": "application/pdf"}, {"id": "cet-14645", "words": "3522", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14645", "date": null, "keywords": "analysis; cells; horam; oscs; process; production; pscs; risk; technologies; variables", "summary": "Among emerging solar technologies, Perovskite Solar Cells (PSCs) and Organic Solar Cells (OSCs) stand out due to their improved conversion efficiency potential, low production costs, and low environmental impact. These novel technologies, marked by unique properties such as high efficiency, flexibility and lightweight design, low production costs, and reduced environmental impacts, have gained attention for their potential to overcome certain limitations of silicon-based panels (B. Chen et al., 2023).", "mime": "application/pdf"}, {"id": "cet-14646", "words": "3731", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14646", "date": null, "keywords": "analysis; base; failure; figure; fragility; plate; pressure; process; skirt; towers", "summary": "Baraschino R., Baltzopoulos G., Iervolino, I., 2020, R2R-EU: Software for fragility fitting and evaluation of estimation uncertainty in seismic risk analysis, Soil Dynamics and Earthquake Engineering, 132. The objective of the study presented in the paper is to simulate the behaviour of such towers when subjected to earthquake-induced ground shaking, with the goal of numerically deriving seismic fragility models.", "mime": "application/pdf"}, {"id": "cet-14647", "words": "3829", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14647", "date": null, "keywords": "analysis; assessment; failure; filling; hazard; risk; storage; tanks; tsunami", "summary": "The order of magnitude of both indices decreases with increasing tank filling levels, confirming the trend discussed previously. As an example, for atmospheric storage tanks, that are the object of this study, technical literature is available for seismic actions, providing vulnerability studies based on observed damage from past events, as in Salzano et al. (2003).", "mime": "application/pdf"}, {"id": "cet-14648", "words": "4383", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14648", "date": null, "keywords": "combustion; fire; flux; heat; hexane; ignition; liquid; mass; pool; rate", "summary": "Mass burning rate, flame radiation properties, such as emissivity and temperature, and flame geometrical characteristics including height, shape and diameter, are dominant factors in the determination of thermal radiation flux from pool fires (Joulain, 1998). This procedure was implemented for the evaluation of pool fires of hexane, ethyl acetate, and ethanol.", "mime": "application/pdf"}, {"id": "cet-14649", "words": "4191", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14649", "date": null, "keywords": "average; facilities; health; schools; spa; staff; students; table; variables; workers", "summary": "Because the healthcare sector is vast, the paper is devoted to medical spa facilities (balneal treatments) in the Czech Republic. The paper aimed to identify the specifics of the lack of staff in spa facilities in the Czech Republic.", "mime": "application/pdf"}, {"id": "cet-14650", "words": "3957", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14650", "date": null, "keywords": "plant; process; scenarios; step; system; water", "summary": "Similarly, also the classical methodologies dedicated to process plant Security Vulnerability/Risk Assessment (SVA/SRA) such as the VAM-CF, the CCPS SVA, the API RP 780 SRA, and the majority of academic contributions, lack in reproducibility in application or do not assess the actual link between manipulations, consequences, and likelihood (Bajpai & Gupta, 2018).While there are studies in the literature (including previous works of the Authors) focused on the analysis of the possible scenarios that can be triggered by the deliberate manipulation of the BPCS and the SIS in plants where large quantities of dangerous substances are processed and/or stored (Cherdantseva et al., 2016), there are no works with scope on drinking water treatment plants. While the risks deriving from the malicious manipulation of the Basic Process Control System (BPCS) and the Safety Instrumented System (SIS) in chemical and Oil&Gas facilities have been systematically analysed in the available literature, including previous works of the Authors, the analysis of the consequences of cyber-attacks to drinking water treatment plants has not been conducted to date.", "mime": "application/pdf"}, {"id": "cet-14651", "words": "3956", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14651", "date": null, "keywords": "chemical; database; dispersion; distances; features; models; number; performance; safety; table", "summary": "Specifically, ML models are implemented to predict safety distances in toxic dispersion scenarios of three substances, namely ammonia, chlorine and ethylene oxide. Future investigation will involve the study of the reduction of the number of input variables, so as to convert ML models in a handy tool for emergency response.", "mime": "application/pdf"}, {"id": "cet-14652", "words": "3071", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14652", "date": null, "keywords": "data; exercises; fatigue; linear; pc1; pca; rate; scale; variables", "summary": "Currently, the prevalent method for assessing physical fatigue relies on subjective testing, primarily employing the Borg scale. Motivated by the potential of objective measures, this research introduces an innovative approach to measuring physical fatigue.", "mime": "application/pdf"}, {"id": "cet-14653", "words": "3569", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-14653", "date": null, "keywords": "european; health; human; osha; risks; safety; systems; technologies; work", "summary": "The study investigates the updated national and international regulatory plan for occupational safety to identify the key priorities and actions required to improve worker health and safety in the upcoming years. In particular, the introduction and use of digital technologies such as wearable devices and artificial intelligence prove to be an opportunity to support production processes and occupational safety (K\u00f6rner et al., 2019).", "mime": "application/pdf"}, {"id": "cet-14654", "words": "4288", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14654", "date": null, "keywords": "culture; education; environment; factors; human; process; risk; safety; systems; training; work", "summary": "These technologies can be used for safety training by offering significant benefits due to immersive but risk-free learning. Towards a more reliable model to overcome evaluation issues in safety training, Chemical Engineering Transactions, 36, 67-72.", "mime": "application/pdf"}, {"id": "cet-14655", "words": "3018", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14655", "date": null, "keywords": "analysis; classifier; component; fatigue; industries; logic; process; state", "summary": "Thus, intermittent rest is recommended. \uf09f Area 3 (A3: higher fatigue state): in this area, belonging values of the fatigue state are higher than those of the non-fatigue state. Moreover, it is also valuable to encompass the development of a personalized scale for determining the optimal rest period, aligning with our research on fatigue states.", "mime": "application/pdf"}, {"id": "cet-14656", "words": "3911", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14656", "date": null, "keywords": "case; factors; health; homecare; module; participants; safety; study; training; ttt", "summary": "The positive feedback received from participants underlines the positive reception of the TTT approach in safety training, also in the context of home care. The importance of considering emotions in the development of effective safety training courses in the food industry.", "mime": "application/pdf"}, {"id": "cet-14657", "words": "3511", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14657", "date": null, "keywords": "duration; eye; figure; fixation; paper; procedure; pupil; saccade; screen", "summary": "The average fixation duration on paper procedure AOI (Fig. 3) is 197.10 +/- 68.67 (Mean and SD respectively). This involved defining the paper and screen procedures as the key AOIs for this paper, as shown in Figure 3, before or while running assisted mapping for each participant.", "mime": "application/pdf"}, {"id": "cet-14658", "words": "3116", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14658", "date": null, "keywords": "analysis; employees; health; industry; occupational; risks; safety; work", "summary": "However, the introduction of new technologies can bring ergonomic risks, cyber risks and psychosocial risks associated with human interaction with AI and robotics. In order to fulfil the essence of risk analysis, risks are subsequently assessed by a semi-quantitative assessment based on the premise of using rating scales.", "mime": "application/pdf"}, {"id": "cet-14659", "words": "3684", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-14659", "date": null, "keywords": "covid-19; experience; fabiano; pandemic; port; resilience; risk; safety; systems; workers; years", "summary": "The pandemic provided an opportunity to bring these two systems together and prompted researchers to investigate the theme of risk assessment to strengthen system resilience (Taarup-Esbensen, 2020) to ensure safety and prevent operational shutdowns (Fabiano et al., 2022). In this regard, the last report of INAIL (INAIL, 2023) observed a decreasing trend of COVID-19 related accident in Italy over time, since their incidence was of 1 in 4 in 2020, 1 in 12 in 2021 and 1 in 6 in 2022, all based on claim reporting.", "mime": "application/pdf"}, {"id": "cet-14660", "words": "3283", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14660", "date": null, "keywords": "concentrations; formation; glucose; hydrates; process; production; water", "summary": "Rossi, F., Li, Y., Gambelli, A.M. Thermodynamic and kinetic description of the main effects related to the memory effect during carbon dioxide hydrates formation in a confined environment. Conclusions The present study deals with carbon dioxide hydrates production with liquid mixtures containing fresh water and glucose, added to the system at different concentrations.", "mime": "application/pdf"}, {"id": "cet-14661", "words": "2869", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14661", "date": null, "keywords": "air; barrier; case; cloud; distance; jets; lng", "summary": "Active barriers involving high- velocity jets require a large amount of energy (compression work when using high-velocity air jets, or heat when using high-velocity steam jets); for the case study investigated, which is a catastrophic and less probable one, the energy required by active barriers with high-velocity jets is of the order of 105 MJ. Therefore, the main aim of this paper is to provide a comparison among the pros and contras of using passive vs. active barriers to reduce the hazardous distance related to an accidental scenario in an LNG regasification terminal.", "mime": "application/pdf"}, {"id": "cet-14662", "words": "3772", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14662", "date": null, "keywords": "accidents; deaths; figure; mexico; number; total", "summary": "The following figure shows the causes of the recorded accidents, where in this case, in Mexico the highest number of accidents occur due to transportation accidents and mechanical failures (30%), being followed by accidents occurred by chemicals used in chemical and petrochemical plants (29%), accidents caused due to human error (26%), and unspecified causes (15%). In this case, there are only four recorded categories of the causes of accidents in Canada, with transportation accidents and mechanical failures causing the most accidents with 36%, while chemicals and human error in residential areas cause 29% of accidents each.", "mime": "application/pdf"}, {"id": "cet-14663", "words": "3084", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14663", "date": null, "keywords": "diameter; explosion; fiber; heat; length; particle; time", "summary": "More specifically, very few papers using the modelling of fiber explosions to better understand the main controlling phenomena able to influence the explosion severity have been published. Particularly, it is possible to observe how considering a fiber as an equivalent sphere tends to underestimate the value of the Kst for small fiber mean diameters up to a factor 10 (even if the reliability of such theoretical Kst value could be not so high); on the contrary, when high fiber diameters are considered Kst value are almost the same as considering the fiber as an equivalent sphere (this last observation is quite reasonable because we are simply approaching the round shape).", "mime": "application/pdf"}, {"id": "cet-14664", "words": "2987", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-14664", "date": null, "keywords": "analysis; dha; dust; explosion; ignition; risk", "summary": "The semi-quantitative method presented herein integrates qualitative expert judgments with quantitative data, fostering a comprehensive evaluation of various scenarios involving dust-related hazards: central to this approach is the utilization of a Risk Matrix, where severity and likelihood classes are intersected to generate risk levels associated with identified dust-related scenarios. Revised: 23 February 2024; Accepted: 5 July 2024 Please cite this article as: Gritti A., Carluccio L.M., Pellegrini L., 2024, Semi-quantitative Dust Hazard Analysis: Advantages and Limitations of Using a Risk Matrix in DHA, Chemical Engineering Transactions, 111, 265-270 DOI:10.3303/CET24111045 CHEMICAL ENGINEERING TRANSACTIONS VOL. 111, 2024 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Valerio Cozzani, Bruno Fabiano, Genserik Reniers Copyright \u00a9 2024, AIDIC Servizi S.r.l. ISBN 979-12-81206-11-3; ISSN 2283-9216 Semi-quantitative Dust Hazard Analysis: Advantages and Limitations of using a Risk Matrix in DHA Andrea Gritti*, Leonardo Michele Carluccio, Lorenzo Pellegrini DEKRA Italia s.r.l., Process Safety Business Unit, Via Fratelli Gracchi 27, 20122 Cinisello Balsamo (MI), Italy andrea.gritti@dekra.com The management of dust hazards within industrial environments remains a critical concern, as sadly testified by the catastrophic events occurred in recent history.", "mime": "application/pdf"}, {"id": "cet-14665", "words": "3548", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14665", "date": null, "keywords": "decision; firefighters; group; process; research; results; simulation; training; xvr", "summary": "This paper describes the integration of virtual training into newly recruited firefighters preparing in the area of entering enclosed spaces and investigates its benefits. This paper aims to describe the integration of virtual training for newly recruited firefighters, with a focus on entering enclosed spaces.", "mime": "application/pdf"}, {"id": "cet-14666", "words": "3978", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14666", "date": null, "keywords": "chemical; crit; decomposition; equipment; runaway; storage; vessel", "summary": "ISBN 979-12-81206-11-3; ISSN 2283-9216 Hydroxylamine vs. Hydrogen Peroxide: a Comparative Study on Storage Stability Giuseppe Andriania, Paolo Mocellina,*, Gianmaria Piob, Ernesto Salzanob, Chiara Vianelloa a Universit\u00e0 degli Studi di Padova, Dipartimento di Ingegneria Industriale, Via Marzolo 9, 35131, Padova, Italia b Universit\u00e0 di Bologna, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Via Terracini 28, 40131, Bologna, Italia paolo.mocellin@unipd.it The chemical industry often handles, stores, and processes molecules like hydroxylamine (HA) and hydrogen peroxide (HP), which can easily undergo thermal decomposition reactions. Exothermic thermal decomposition is a typical unpleasant chemical process that must be accounted for when handling unstable materials (Pio et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14667", "words": "3033", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14667", "date": null, "keywords": "combustion; fire; furnace; materials; min; products; substances; wood", "summary": "In this study, the thermal decomposition and combustion products of wood-based board and pellets were studied. Sawdust and shavings obtained at industrial plants are used to produce wood pellets, which are used for heating in central heating boilers, in single- family homes and district heating plants, and more (Kajda-Szcze\u015bniak, 2013).", "mime": "application/pdf"}, {"id": "cet-14668", "words": "4127", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14668", "date": null, "keywords": "cathode; cells; composition; electrolyte; ion; lithium; lto; n.d; nca", "summary": "The other two thermograms 293 show an endothermic peak at 168 \u00b1 0.1 \u00b0C with a \u0394H of 41 \u00b1 5 J/g (LTO/NCA) and at 168 \u00b1 0.4 \u00b0C with a \u0394H of 27 \u00b1 1 J/g (C/LFP), both close to the melting temperature of PP, around 165 \u00b0C. 4. In particular, it is important to identify electrolyte chemical composition and the additives because, in case of release, they might have consequences on human health and environment.", "mime": "application/pdf"}, {"id": "cet-14669", "words": "3717", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14669", "date": null, "keywords": "accidents; analysis; batteries; battery; fire; ion; lithium; plant; risk; safety; site; storage; unit", "summary": "Additionally, the improvement of safety procedures to manage accidents involving lithium ion batteries should be considered. The storage buildings within the yard area are used to store lithium batteries.", "mime": "application/pdf"}, {"id": "cet-14670", "words": "3998", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14670", "date": null, "keywords": "directive; equipment; index; ped; pipes; pressure; pressure pipes; risk; table", "summary": "Safe management of pressure pipes during operating phase Pressure pipes, as well as pressure equipment and/or assemblies, introduce a specific risk in the workplace (even if correctly constructed and CE-PED certified) depending on: 1) use condition (pressure, temperature, physical state); 2) place of installation and possible interference with other nearby equipment; 3) type of plant; 4) contained fluid, dangerous or non-dangerous (the dangerous fluids, indicated in the PED directive as group 1, are: explosive, flammable, toxic, oxidising; while the fluids of group 2 are all the other fluids not falling within group 1); 5) Volume (vessels) and Nominal Diameter (DN). The PED directive introduced pressure pipes because they very often cause triggering of accidental events (fires, explosions, toxic releases), involving successively important pressure equipment (steam generators, reactors, heat exchangers, pressure tanks, etc.).", "mime": "application/pdf"}, {"id": "cet-14671", "words": "2696", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14671", "date": null, "keywords": "decomposition; degradation; effluents; fire; flame; products; retardants; tbbpa", "summary": "The samples of selected fire retardants (20 g) were fed into the furnace in the boat travelling at 40 mm/min. The yields of carbon oxide (CO), hydrogen cyanide (HCN), formaldehyde (HCOH), nitrogen oxides (NOx) and light hydrocarbons were determined using a gas analyser: However, it is more recognized that there is also a need to assess the environmental impact of toxic compounds within fire effluents.", "mime": "application/pdf"}, {"id": "cet-14672", "words": "3877", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-14672", "date": null, "keywords": "cloud; gas; lpg; release; road; scenarios; vehicles", "summary": "Conclusions This study conducted a numerical study of LPG dispersion on a road for different standard release scenarios, with particular focus on the transformation of the dispersed cloud into an equivalent stoichiometric cloud that yields similar explosion characteristics in a domain of about 150 m from the release. Instead, the study informs on appropriate maximum equivalent gas cloud volumes that can be used as a source of blast, which could be translated to a maximum number of vehicles that should be considered as the blast source, even if more vehicles are present within the flammable region.", "mime": "application/pdf"}, {"id": "cet-14673", "words": "3695", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14673", "date": null, "keywords": "analysis; chemical; equipment; hazop; laboratories; laboratory; pressure; research; risk; safety", "summary": "The findings of this research offer valuable insights into laboratory safety in academic settings, providing a risk assessment and mitigation model adaptable to various experimental setups. This framework aims to enhance the understanding of potential dangers within the lab and emphasize the importance of a comprehensive approach to laboratory safety.", "mime": "application/pdf"}, {"id": "cet-14674", "words": "4064", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14674", "date": null, "keywords": "batteries; battery; directive; energy; fire; ion; ion batteries; lithium; regulation; runaway; substances", "summary": "327 The temperature conditions of battery storage are related to the hazards associated with their construction and the possibility of thermal runaway. The composition of batteries is manufacturer-specific.", "mime": "application/pdf"}, {"id": "cet-14675", "words": "3552", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14675", "date": null, "keywords": "bleve; failure; figure; fill; length; liquid; opening; pressure; vessel", "summary": "However, upon closer examination, Test 32 from Table 1, demonstrated that even with high failure pressure, vessel partial failure persisted. He observed that failure dynamics were linked to crack instability, rapid over-pressurization, or rapid DOI: 10.3303/CET24111056 Paper Received: 23 January 2024; Revised: 26 June 2024; Accepted: 22 June 2024 Please cite this article as: Laamarti E.M., Heymes F., Birk A.M., 2024, Consequences of Partial Vessel Failure in BLEVE and Liquid Full Fill Rupture Events, Chemical Engineering Transactions, 111, 331-336 DOI:10.3303/CET24111056 331 mailto:frederic.heymes@mines-ales.fr quenching of the crack tip supported by thermo-hydraulics, resulting in uncontrolled vessel failure.", "mime": "application/pdf"}, {"id": "cet-14676", "words": "3531", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-14676", "date": null, "keywords": "european; gas; green; hydrogen; lng; orc; projects; regasification; safety; storage; substances; systems; transition", "summary": "The previous Alternative Fuels Infrastructure Directive (AFID, EC 2014) for the creation of an infrastructure for alternatives to fossil fuels in order to reduce emissions in land and maritime transport sector, is increasing natural gas storage (including biomethane) and distribution plants both in compressed and liquefied form (CNG and LNG). Last but not least, green hydrogen generated by electrolytic processes powered by renewable sources is a climate-friendly alternative that could replace natural gas, coal and oil in hard-to-abate industries and transport.", "mime": "application/pdf"}, {"id": "cet-14677", "words": "3726", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14677", "date": null, "keywords": "agent; capping; diameter; et al; metal; method; nanoparticles; nps; synthesis", "summary": "In the present experimental campaign, some precautions have been adopted to prevent a surface oxidation of Sn NPs, according to the following operations: - The liquid holdup (deionized water) has been bubbled with argon for 30 min before adding the capping agents. In particular, Sn NPs stabilized with SA have an average diameter of 18 and 35 nm in case of BM and JM method, respectively.", "mime": "application/pdf"}, {"id": "cet-14678", "words": "3215", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14678", "date": null, "keywords": "areas; explosion; representation; software; storage; tank", "summary": "2D representation is a well-established and accepted method, 3D representation is a new approach. Figure 1: Storage tank explosive atmosphere from side view (2D)", "mime": "application/pdf"}, {"id": "cet-14679", "words": "3772", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14679", "date": null, "keywords": "firefighting; risk; safety; strategies; tank", "summary": "The layout and location of the tanks and heat fluxes from tanks received by the residential areas in the event of tank fire at adjacent tanks are illustrated in Figure 1. The safety manager has decided to prepare a firefighting strategy for a future scenario in case of tank fire at tank T5 when there are three available firefighting trucks (L=4) and a total of 19,000 m3 of water available for firefighting (\ud835\udc4a\ud835\udc5a\ud835\udc4e\ud835\udc65).", "mime": "application/pdf"}, {"id": "cet-14680", "words": "3622", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14680", "date": null, "keywords": "firefighting; flux; model; resources; tank; \ud835\udc42\ud835\udc5f\ud835\udc56\ud835\udc54\ud835\udc56\ud835\udc5b\ud835\udc4e\ud835\udc59", "summary": "Additionally, they should determine the required firefighting resources (e.g., firefighting water tanks and fire engines) to fight potential fires and prevent fire domino effects in the plant. For effective firefighting, determining the quantity of required firefighting resources is as important as selecting firefighting strategies.", "mime": "application/pdf"}, {"id": "cet-14681", "words": "3270", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14681", "date": null, "keywords": "aging; analysis; data; decomposition; ems; kinetic", "summary": "The kinetics of the thermal decomposition of EMs can be extracted from thermal analysis data and, once their reliability for extrapolation outside the range of calibration has been thoroughly assessed, used to predict the shelf life \u2013 to this end, the failure threshold needs to be defined as a function of the limiting extent of conversion. Different thermal analysis techniques, such as thermogravimetry (TG), differential thermal analysis (DTA), and differential scanning calorimetry (DSC), have been widely used to investigate the decomposition of EMs, even as simultaneous techniques (i.e., TG/DTA and TG/DSC) and in combination with mass spectrometry (MS) and/or Fourier-transform infrared spectroscopy (FTIR)", "mime": "application/pdf"}, {"id": "cet-14682", "words": "3490", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14682", "date": null, "keywords": "curtain; jet; jets; lfl; methane; methane jet; mitigation; pressure; steam; steam curtain", "summary": "As a result, individual steam jets are unable to generate an aggregate steam flow rate (the so-called plane jet), operating autonomously and thus confining the dilution effect to areas in direct interaction with one or more of these individual jets. 375 3. Results Through Fluent simulations, methane jets can be visualised by creating surfaces defined by a specific methane concentration, in this work assumed as the LFL or the half of the LFL.", "mime": "application/pdf"}, {"id": "cet-14683", "words": "5082", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-14683", "date": null, "keywords": "burner; electricity; energy; flames; gas; grid; heat; hydrogen; nox; use; wind", "summary": "This review aims to dispel the myths, misinformation and fake facts about hydrogen burner flames in the literature. If hydrogen flames on real burners were invisible, particularly for cooker hobs, then this would be a safety issue.", "mime": "application/pdf"}, {"id": "cet-14684", "words": "2749", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14684", "date": null, "keywords": "adoption; energy; hydrogen; risk; safety; storage; systems; technologies", "summary": "3.1 Causal Loop Diagram for analysing the adoption of hydrogen storage technologies (Stage 1) Figure 1: CLD for analysing the adoption of hydrogen storage technologies 386 Table 1: Feedback loops for building the CLD by analysing the adoption of hydrogen storage technologies No. Feedback loop Loop description 01 Cost-driven adoption loop", "mime": "application/pdf"}, {"id": "cet-14685", "words": "3357", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14685", "date": null, "keywords": "ccs; co2; equipment; events; failure; flood; risk; safety; scenarios", "summary": "The findings conclusively demonstrated a significant escalation in the probability of CCS conditioning equipment failure due to natural hazards. Methodology The methodology proposed in the current study, schematized in Figure 2, aims to investigate how floods and earthquakes may affect the integrity of CCS equipment and to identify inherent safety indicators in the context of risk assessment.", "mime": "application/pdf"}, {"id": "cet-14686", "words": "3046", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-14686", "date": null, "keywords": "accident; energy; hydrogen; ignition; methane; modelling; production; scenarios", "summary": "Figure 1 - Accident frequencies for hydrogen scenarios extrapolated from the HIAD 2.0 database. In the following paragraphs, building on this statistical evidence and supplementing it with a representative case study, characteristic modelling for accident scenarios involving hydrogen production and storage will be presented.", "mime": "application/pdf"}, {"id": "cet-14687", "words": "3831", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14687", "date": null, "keywords": "energy; flow; hrs; hydrogen; pressure; process; refueling; risk; safety; tank; tool", "summary": "The potential of this tool for investigating hydrogen refueling processes is the main goal of this paper. Therefore, along with the extensive fuel cell vehicle use, a widespread network of hydrogen refueling stations (HRSs) is required for an adequate and smooth transition towards zero-emission transport.", "mime": "application/pdf"}, {"id": "cet-14688", "words": "3804", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14688", "date": null, "keywords": "aet; analysis; errors; hra; hydrogen; inspection; probability; sub; tank; task", "summary": "The Petro-HRA method comprehends the definition of the scenario, data collection, task analysis, identification, modeling, and quantification of human errors, and the reduction of human error probabilities. \u2022 Task analysis \u2013 It defines and structures the operators' tasks through a hierarchical task analysis (HTA) following the detect-diagnose-decide-act cognitive-behavioral model; it is based on the section devoted to nondestructive examination of pressure vessels of the ASME BPVC (ASME, 2023).", "mime": "application/pdf"}, {"id": "cet-14689", "words": "3736", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-14689", "date": null, "keywords": "assessment; case; energy; hydrogen; methane; model; release; risk; scenarios", "summary": "Case study The case study focuses on the characterization of the risk associated to hydrogen accidental releases from a typical facility in the energy industry. This result derives from the higher frequencies obtained for hydrogen scenarios, as evident from the data reported in Table 2.", "mime": "application/pdf"}, {"id": "cet-14690", "words": "4095", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14690", "date": null, "keywords": "cryogenic; fire; protection; rate; systems; tank; variation; water", "summary": "Water deluge systems (WDS) and/or water curtains are extensively used for fire protection of cryogenic tanks. Conclusions In the present study the influence of the performance of water deluge systems and water curtains used in fire protection of LH2 cryogenic tanks has been assessed through the estimation of their time to failure.", "mime": "application/pdf"}, {"id": "cet-14691", "words": "4311", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14691", "date": null, "keywords": "concentration; diffusion; energy; glass; hydrogen; industry; model; pressure; release; simulation; time", "summary": "The results of this work can be used as the starting point to build a CFD model suitable for studying hydrogen releases in large domains, such as glass manufacturing facilities, where obstacles and mechanical ventilation systems are present. This study represents the first step in building a model for hydrogen releases capable of replicating a wide range of operating conditions.", "mime": "application/pdf"}, {"id": "cet-14692", "words": "1998", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14692", "date": null, "keywords": "bench; hydrogen; moc; reviews; safety; system", "summary": "Deepening the study of the MoC reviews methodology will enable its application across various types of hydrogen systems, allowing for quick adaptation to different situations with the assistance of the 5W2H plan. An overview: Current progress on hydrogen fuel cell vehicles.", "mime": "application/pdf"}, {"id": "cet-14693", "words": "4462", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14693", "date": null, "keywords": "absorption; capture; chemical; co2; energy; mass; nanofluids; nanoparticles; rate; transfer; water", "summary": "Notably, the discussion on amine-based nanofluids highlights their effectiveness in chemical adsorption, with studies demonstrating significant enhancements in CO2 absorption rates, particularly with the inclusion of nanoparticles like TiO2. In some studies, to assess the reusability and reactivation of nanofluid, some tests were carried out by performing five cycles of CO2 absorption and desorption.", "mime": "application/pdf"}, {"id": "cet-14694", "words": "2987", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14694", "date": null, "keywords": "cell; components; design; fuel; hydrogen; materials; piping; pressure; self; system", "summary": "Relevant standards and regulations published by the Society of Automotive Engineers (SAE) regarding hydrogen fuel systems in vehicles were consulted to gain insights into safety considerations, testing procedures, and performance requirements. This paper explores design considerations to ensure safety and efficiency in fuel cell systems, focusing on components and materials in fuel piping, while adhering to relevant standards and regulations.", "mime": "application/pdf"}, {"id": "cet-14695", "words": "3947", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14695", "date": null, "keywords": "case; cryogenic; fire; heat; hydrogen; layer; mli; model; tank", "summary": "The application of the model to several case studies considering different numbers of MLI layers and tank geometries demonstrates that aluminum-based MLI offers scarce protection in case of exposure to a hydrocarbon poolfire. Figure 3 shows the impact of the number of MLI layers, N, on the activation time (tPRV) of the pressure relief valve (PRV) (set to 4.7 bar as in the fire test conducted by Pehr (1996)) for the three case studies.", "mime": "application/pdf"}, {"id": "cet-14696", "words": "3460", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14696", "date": null, "keywords": "containment; events; hydrogen; lh2; pressure; safety; tank; trailer", "summary": "Pressure safety system (PSVs, rupture disks and vent stack) 461 This event models the successful operation of the pressure safety system (PSVs, rupture disks or vent stack) in the event of a continuing pressure rise beyond and above the nominal set points. Trailer tank Insulation failure or vacuum loss (IE-1)", "mime": "application/pdf"}, {"id": "cet-14697", "words": "2800", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14697", "date": null, "keywords": "battery; bess; energy; explosion; fire; ion; lithium; runaway; storage", "summary": "In particular, the effectiveness of two barriers have been analyzed: \u2022 Separation distance between BESS units and electric transformer \u2022 Structural characteristics of the BESS walls The analyses for the transformer fire scenario showed that the temperatures of the external side of the most exposed wall reached about 250 \u00b0C due to the interposed separation distance (5 m); the presence of an intermediate technical volume and the thermal insulation of the walls avoided a significant rise of the air temperature inside the batteries room, that reached a temperature of about 30 \u00b0C. This approach is consistent with what has already been developed, again for BESS systems, and is available in the relevant scientific literature, which shows some applications of the Bow-Tie methodology to similar cases.", "mime": "application/pdf"}, {"id": "cet-14698", "words": "3837", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14698", "date": null, "keywords": "battery; electric; ferries; ferry; fuel; hydrogen; passenger; potential; power; ship; system", "summary": "In the context of passenger ferries, H2-FCs offer several advantages. However, there are challenges that need to be addressed before widespread implementation of H2-FC technology on passenger ferries can be achieved.", "mime": "application/pdf"}, {"id": "cet-14699", "words": "4129", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-14699", "date": null, "keywords": "bag; compounds; fire; gas; test; \ud835\udc35 \u00b0; \ud835\udc36\ud835\udc42\ud835\udc40\ud835\udc35 \u00b0; \ud835\udc36\ud835\udc56 \ud835\udc35; \ud835\udc36\ud835\udc56 \ud835\udc36\ud835\udc42\ud835\udc40\ud835\udc35; \ud835\udc49\ud835\udc56 \ud835\udc35", "summary": "Gases produced from the combustion of the cell were also sampled during the test and collected in gas bags. Figure 1: Scheme of the gas sampling system Figure 2: Gas bag 1 m Ci COMB (t)", "mime": "application/pdf"}, {"id": "cet-14700", "words": "2722", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14700", "date": null, "keywords": "depressurization; fluid; gas; hydrogen; methane; pipeline; simulation; temperature", "summary": "The critical properties of hydrogen and the two lightest components of natural gas methane, and ethane are summarized in Table 1. The reduction of carbon dioxide generated using natural gas for electric energy production or domestic usage is the main factor suggesting the addition of hydrogen.", "mime": "application/pdf"}, {"id": "cet-14701", "words": "4030", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14701", "date": null, "keywords": "attack; barriers; case; equipment; losses; nodes; safety; security", "summary": "State High Present Detection Success Success Success Success Success Success Prior Probability 0.85 0.40 0.30 0.38 0.95 0.11 0.96 0.96 0.96 As it can be seen, the prior probabilities of safety barriers (Nodes 3) are higher than that of security barriers (Nodes 2). For this reason, this work shows a methodology to assess the economic losses associated to intentional attack scenarios considering the synergistic performance of safety and security barriers and potential domino effects.", "mime": "application/pdf"}, {"id": "cet-14702", "words": "3419", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14702", "date": null, "keywords": "fuel; hydrogen; liquid; pemfc; power; pss; reference; safety; ship; storage; systems", "summary": "Indeed, an inherent safety footprint quantification is introduced to summarise the overall hazard level of ship power systems. van Biert L., Godjevac M., Visser K., Aravind P. V., 2016, A review of fuel cell systems for maritime applications, Journal of Power Sources, 327, 345\u2013364.", "mime": "application/pdf"}, {"id": "cet-14703", "words": "3487", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14703", "date": null, "keywords": "acoustic; corrosion; emission; entropy; figure; filtering; localization; noise; signal; test", "summary": "Despite technological advancements, noise remains a significant hurdle for detection of ToA in AE signals. However, the computational complexity of the wavelet transforms, as well as the noise factor of AE signals described above, are pushing researchers to find alternative efficient ways to process AE signals especially when simple computational algorithms are needed in embedded systems for real-time monitoring scenarios.", "mime": "application/pdf"}, {"id": "cet-14704", "words": "3237", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14704", "date": null, "keywords": "experimental; model; nozzle; npr; pressure; turbulence; \ud835\udf15\ud835\udc65\ud835\udc57", "summary": "For instance, Balabel et al. (2011) analysed the performance using specific NPR with turbulence models such as Standard k-\u03b5 (Launder and Spalding, 1972), Extended k-\u03b5 (Chen and Kim, 1987), k-\u03b5-v2-f (v2-f-1) (Lien and Kalitzinm, 2001), Realizable k-\u03b5-v2-f (v2-f-2) (Durbin, 1995), SST k-\u03c9 (Menter, 1994), and Reynolds Stress (Launder et al., 1975). Future research in rocket propulsion systems and nozzle design can leverage this study's methodology and results to choose turbulence models for enhanced predictive accuracy.", "mime": "application/pdf"}, {"id": "cet-14705", "words": "3745", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14705", "date": null, "keywords": "analysis; data; description; idf; network; operation; resilience; system; text; word", "summary": "TF-IDF is a statistical model commonly used in traditional machine learning algorithms for text analysis. It relies on the detection of early precursor of system failure states, on flexibility and controllability of processes, protective barriers construction and minimization of recovery time.", "mime": "application/pdf"}, {"id": "cet-14706", "words": "2831", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14706", "date": null, "keywords": "ahp; data; decision; energy; factors; feature; importance; transition", "summary": "The former approach is based on the Analytic Hierarchy Process (AHP) integrated with a fishbone diagram, while the latter relies on gradient-boosted decision trees and feature importance, integrated into the fishbone diagram framework. 5. Feature Importance: Random Forest can provide insights into feature importance, indicating which variables contribute most significantly to the model's predictions.", "mime": "application/pdf"}, {"id": "cet-14707", "words": "2704", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14707", "date": null, "keywords": "cell; current; overcharge; temperature; voltage", "summary": "For ambient temperatures below 50 \u00b0C the CID activated correctly, cutting off the current and thus blocking further increase in cell temperature. Two test campaign, Li et al. (2020) and Li et al. (2022), measured the activation pressure of CID and safety vent at ambient temperature (22 \u00b0C) and high temperature (100 \u00b0C) on four brands of 18650 cells, achieving lower activation pressure with temperature increase for both the protection devices in all cell types tested.", "mime": "application/pdf"}, {"id": "cet-14708", "words": "4138", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-14708", "date": null, "keywords": "api; european; installations; italian; maritime; measures; operations; parliament; port; practices; security", "summary": "Best practices to enhance offshore security In the following, best practices concerning protective measures are proposed, based on the result of a study performed in the framework of the Italian project Sicurezza operazioni a mare supported by Ministero dell'Ambiente e della Sicurezza Energetica (MASE), Direzione Generale Infrastrutture e Sicurezza (DGIS). Best practices to enhance offshore security 5.", "mime": "application/pdf"}, {"id": "cet-14709", "words": "3624", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14709", "date": null, "keywords": "activities; data; indicators; number; offshore; operations; performance; production; report; safety", "summary": "The practices adopted internationally by some reference countries with a consolidated practice in offshore safety management, such as Norway and the United Kingdom (Petroleum Safety Authority Norway, Health and Safety Executive), were also analysed. Conclusions The primary regulation governing safety in Italian offshore hydrocarbon production is the Legislative Decree n. 145/2015, aligning with the European Directive 2013/30.", "mime": "application/pdf"}, {"id": "cet-14710", "words": "3069", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14710", "date": null, "keywords": "camp; cost; disposal; management; pet; plastic; safety; solid; waste", "summary": "This study aimed to evaluate occupational safety in the management of PET plastic waste at Lot 57, analyze the economic losses due to poor segregation, and propose improvements to optimize waste management, thereby reducing costs and minimizing environmental impact. The total amount of non-hazardous recyclable waste generated by the new world operational base camp lot 57 during 2017, 2018 and until March 2019 of PET plastic waste 60 tons.", "mime": "application/pdf"}, {"id": "cet-14711", "words": "2768", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14711", "date": null, "keywords": "health; mimosa; paiche; process; quebracho; safety; skin; tanning; treatments", "summary": "The study I consider the legislation existing in the country to guarantee the protection and safety of workers during the management of paiche skin tanning, considering the use of chromium oxide as a high risk for the health of workers, the regulations are still insufficient and the protection and security of the workers. Paiche skin leather resulting was resistant and moldable, with a bending resistance capacity that exceeded 30,000 bends without deformation, thus providing greater tear resistance T1 (146.23 N) and T5 (143.12 N), and greater traction in T4 (16.62 N/mm2), Furthermore, the leather had ashes less than 1 %, humidity less than 9%, and chromium oxide content by below 1.5%.", "mime": "application/pdf"}, {"id": "cet-14712", "words": "3043", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14712", "date": null, "keywords": "co2; column; gas; parameters; phase; temperature", "summary": "557 Nomenclature \ufffd\u0305\ufffd\ud835\udc56 \u2013 adsorbed concentration, mol/kg \ud835\udc5e\ud835\udc56 \u2217 \u2013 equilibrium adsorbed concentration, mol/kg \ud835\udc3e\ud835\udc56 \u2013 mass transfer coefficient, 1/s \ud835\udc36\ud835\udc56 \u2013 concentration in gas phase, mol/m3 \ud835\udc37\ud835\udc3f,\ud835\udc56 \u2013 material dispersion coefficient, m2/s \ud835\udf00 \u2013 column void fraction, - \ud835\udf0c\ud835\udc43 \u2013 particle density, kg/m3 \ud835\udc36 \u2013 total gas concentration, mol/m3 \ufffd\u0302\ufffd\ud835\udc5d,\ud835\udc54 \u2013 gas phase specific heat, J/(mol K) \ud835\udc47 \u2013 gas phase temperature, K \ud835\udc5d \u2013 pressure, Pa \ud835\udc37\ud835\udc47 \u2013 energy dispersion coefficient, W/(m K) \ud835\udc62 \u2013 superficial gas velocity, m/s \ud835\udc53\ud835\udc43\ud835\udc37 \u2013 Ergun friction factor, Pa/m \ud835\udefd\ud835\udc5d \u2013 particle surface / particle volume, 1/m \u210e \u2013 heat transfer coefficient, W/(m2 K) Typically, in the chemical industry, adsorption processes can be divided into two major categories depending on the amount of pollutant present in the contaminated stream.", "mime": "application/pdf"}, {"id": "cet-14713", "words": "4021", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14713", "date": null, "keywords": "damage; equipment; events; flood; natech; pressure; substances; systems; technical; vulnerability", "summary": "This work aims to synthetically analyze the V vulnerability of the damage caused to the critical primary containment technical systems previously highlighted following natural flood events through the following steps: \u2022 Identify the types of critical primary containment technical systems containing dangerous substances (e.g.: atmospheric tanks, pressure tanks, reactors, stirrers, distillation columns, heat exchangers, pressure pipes, etc.) by analyzing the storage and process conditions of the dangerous substances contained (e.g.: temperature, pressure, physical state, volume) \u2022 Analyze all possible damage to the individual technical system (e.g.: buckling, rupture of pipes and connections, tearing, displacement, overturning, puncturing damage, ignition and sparking, overfilling, support leg failure, shell-to-button delachment, etc.) Finally, although the work focuses on establishments covered by the European Seveso directive (2012/18/EU), the principles of damage caused by natural flood events on the various technical systems that contain dangerous substances can also be adopted in other industrial sectors excluded by Seveso directive.", "mime": "application/pdf"}, {"id": "cet-14714", "words": "4187", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14714", "date": null, "keywords": "barriers; failure; protection; safety; systems; waves; \u26aa \u26aa", "summary": "In spite of the significance of the matter, scarce attention has been devoted in the existing literature to the study of Natech accidents caused by cold waves, and the effects of such natural events on safety systems are only marginally considered. Safety systems are crucial for managing risks in industries dealing with hazardous materials and processes (Mannan, 2005).", "mime": "application/pdf"}, {"id": "cet-14715", "words": "3399", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14715", "date": null, "keywords": "acid; energy; flue; gas; scr; so2; treatment; waste", "summary": "Through economic analysis, the results suggest that the proposed retrofit offers potential benefits in terms of operating cost reductions, in particular for flue gases with lower SO2 loads. If post-treatment flue gas reheating is required, e.g., to prevent 571 the occurrence of a visible plume at the stack, or because the existing line includes a tail-end selective catalytic reactor (SCR) for ultra-low NOX emissions, the associated energy penalty more than offsets any cost savings related to lower consumption of reactant in the switch from dry to wet acid gas removal (Dal Pozzo et al., 2023b;", "mime": "application/pdf"}, {"id": "cet-14716", "words": "3565", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14716", "date": null, "keywords": "adsorption; capture; co2; figure; foam; hkust-1; metal; mof; mofs; pressure; synthesis", "summary": "The column used for CO2 adsorption is made of Teflon, with an internal diameter of 3 cm and height 9 cm. Xu F., Yu Y., Yan J., Xia Q., Wang H., Li J., Li Z., 2016, Ultrafast room temperature synthesis of GrO-HKUST-1 composites with high CO2 adsorption capacity and CO2/N2 adsorption selectivity, Chemical Engineering Journal 303, 231-237.", "mime": "application/pdf"}, {"id": "cet-14717", "words": "2771", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14717", "date": null, "keywords": "air; data; environmental; matter; monitoring; pollution; quality; solofra", "summary": "The integration of proprietary firmware and software within Sensy streamlines data processing and transmission, allowing for the seamless collection, analysis, and sharing of environmental data. By systematically collecting and analyzing environmental data, industries can gain a clearer picture of their emissions landscape.", "mime": "application/pdf"}, {"id": "cet-14718", "words": "3784", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14718", "date": null, "keywords": "bubble; capture; chemical; co2; column; gas; model; nh3; solution; \ud835\udc36\ud835\udc3b+", "summary": "[\u00b0C] CNH 3 in [M] QG [m3/h] QL [m3/h] yCO 2 in [%] 4 10 1 25.47\u221910-3 1.67\u221910-3 10 5 0 1 25.47\u221910-3 1.67\u221910-3 10 6 0 2 25.47\u221910-3 1.67\u221910-3 10 Figure 1: Experimental setup of CO2 capture in bubble column (a) and packed bed system (b). Whiteman, W. G., 1962, The two-film theory of gas absorption, International Journal of Heat and Mass Transfer, 5 (5) 429-433.", "mime": "application/pdf"}, {"id": "cet-14719", "words": "3855", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14719", "date": null, "keywords": "events; lightning; macro; natech; process; strikes", "summary": "Although the document regarding the average number of lightning strikes per year and square kilometer in Italian municipalities, assigned values of Ng to three different areas in Italy as 4, 2.5, or 1.5 lightning per year per km2 respectively (Sabatino and Cordisco, 2013), no longer holds normative status, it can be used as a first glance to associate lightning territorial vulnerability to MHI distribution. These macro-sectors are frequently located in areas with medium to high lightning density on the ground, and they are also among the most vulnerable to lightning strikes, according to a historical analysis of lightning-triggered NaTech events.", "mime": "application/pdf"}, {"id": "cet-14720", "words": "3523", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14720", "date": null, "keywords": "activity; health; impact; office; productivity; programs; wellness; work; workers; workplace", "summary": "Different physical activity and health programs and approaches, such as yoga, targeted exercise programs and mobile apps, show positive results. On the other hand, the analysis of physical activity programs provides a deeper understanding of the effectiveness of these programs by offering concrete and relevant information on how they can influence health and performance in the work environment.", "mime": "application/pdf"}, {"id": "cet-14721", "words": "3080", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14721", "date": null, "keywords": "concentration; cyanide; pcb; waste", "summary": "Both glycine concentration and pH have a negative effect on cyanide concentration. Figure 4: Cyanide production and pH profile at different times and glycine concentration.", "mime": "application/pdf"}, {"id": "cet-14722", "words": "3928", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14722", "date": null, "keywords": "adsorbent; adsorption; chromium; concentration; cr(vi; data; mgo@ac; studies; study; surface", "summary": "Figure 3: Isotherm model fits of the experimental adsorption equilibrium data (a); kinetics models to fit adsorption data (b). To overcome these difficulties, several strategies such as loading of the metallic nanoparticles on matrices of porous materials such as activated carbon and graphene oxide matrices have been suggested most feasible strategy to avoid agglomeration and increase adsorption potential synergistically (Wu et al., 2020).", "mime": "application/pdf"}, {"id": "cet-14723", "words": "3611", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14723", "date": null, "keywords": "analysis; carbon; carbon footprint; co2; company; consumption; emissions; energy; footprint; laboratory; process; total", "summary": "In this context, an analysis of carbon footprint was conducted in an environmental consulting company located in Bucaramanga, Colombia. These results provided crucial information on the environmental impact and carbon footprint associated with each process within the company's operations, facilitating informed decision making.", "mime": "application/pdf"}, {"id": "cet-14724", "words": "3086", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14724", "date": null, "keywords": "dust; flame; flame propagation; obstacles; propagation; velocity", "summary": "Propagation velocity is obtained by visualizing the light emitted by the flame front using two high-speed cameras. Simultaneous data of propagation velocity and unburned flow velocity are important for accurately validating the flame propagation models.", "mime": "application/pdf"}, {"id": "cet-14725", "words": "3445", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14725", "date": null, "keywords": "flow; impeller; power; velocity", "summary": "The authors observed drop in the power number in axial flow impellers for lower clearance and liquid level values. The analysis for turbulent energy dissipation contours for axial flow impeller (RT45) have also been shown in Figures 4 (ii) C and D. Similar results of power consumption have been observed for the liquid level for RT45 with higher magnitudes.", "mime": "application/pdf"}, {"id": "cet-14726", "words": "3539", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14726", "date": null, "keywords": "activities; area; assessment; bqi; data; methodology; pressures; quality; river; surface; water", "summary": "Identifying primary anthropogenic pollution sources and assessing their relative expected pressures on river water, 2. 2.1 Identification and characterization of the anthropogenic pressures Industrial activities are considered the most significant anthropic pressure that affects surface water quality (Adewumi et al., 2011).", "mime": "application/pdf"}, {"id": "cet-14727", "words": "3691", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-14727", "date": null, "keywords": "bottles; conditions; degradation; mol; properties; samples; spet", "summary": "645 Table 3 Average molecular weight of SPET samples subjected to natural aging for 12 months Months Year/2021- 2022 years Samples Transparent Transparent 1 Blue Green Brown Kefir (whiteopaque) (22.03.2021) [\u041cn] (g/mol) 12.03 0.,6 8 21869 0.62 19565 0.639 2029 0 0.63 199 46 0.55 16936 0.45 1328 9 12.04 0.67 5 21675 0.612 19262 0.63 1994 6 0.62 195 65 0.535 16381 0.445 1312 0 12.05 0.67 21482 0.6 18807 0.625 1975 6 0.61 2 192 62 0.52 15802 0.428 1251 9 20.06 0.66 5 21289 0.58 18055 0.6 1880 7 0.6 188 07 0.5 15098 0.42 1223 8 27.07 0.65 20712 0.57 17680 0.56 1730 7 0.56 173 07 0.4 11539 0.35 9824 27.08 0.65 20712 0.558 17233 0.558 1723 3 0.55 8 172 33 0.395 11365 0.34 9487 27.09 0.65 20712 0.556 17158 0.558 1723 3 0.55 8 172 33 0.395 11365 0.33 9152 27.10 0.65 20712 0.556 17158 0.558 1723 3 0.54 7 168 24 0.395 11365 0.33 9152 27.11 0.65 20712 0.55 16936 0.558 1723 3 0.54 7 168 24 0.39 11192 0.325 8925 07.03 0,63 19946 0.53 16196 0.54 1656 5 0.53 161 96 0.38 10847 - - Table 4 Average molecular weight of SPET samples tested in the climatic chamber(44-cycles,8800 hours), (12months)", "mime": "application/pdf"}, {"id": "cet-14728", "words": "3818", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14728", "date": null, "keywords": "chemicals; companies; european; handling; questionnaire; questions; survey; sustainability", "summary": "Anna P\u00e4\u00e4kk\u00f6nen Finnish Safety and Chemicals Agency, Industrial Processes, Yliopistonkatu 38, 33100 Tampere, Finland anna.paakkonen@tukes.fi The European Green Deal the EU Corporate Sustainability Reporting Directive (CSRD) requires all large (> 500 employees) and listed companies apart from SMEs to report on sustainability. The CRSD requires all large (> 500 employees) and listed companies apart from SMEs to report on sustainability.", "mime": "application/pdf"}, {"id": "cet-14729", "words": "3806", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14729", "date": null, "keywords": "adsorption; anionic; asp; concentration; ctab; model; ppm; sds; surfactant", "summary": "However, studies on surfactant adsorption in ASP formulation modelling are still limited and unclear, making it challenging to obtain the ideal ASP formulation. However, research and studies on surfactant adsorption in ASP formulations is currently limited.", "mime": "application/pdf"}, {"id": "cet-14730", "words": "3496", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14730", "date": null, "keywords": "agartala; city; cng; co2; diesel; emission; fuel; scenario; vehicles", "summary": "The CO2 emissions from CNG vehicles are lower than those from conventional vehicles because natural gas has a lower carbon intensity than petrol or diesel (Iqbal et al., 2011), CNG emits about 25% less CO2 (Wakdikar, 2002) than diesel fuel for the same amount of energy and thus makes an important contribution to the reduction of CO2 and pollutants (Milojevi\u0107 et al., 2011). For that reason, an attempt to conversion of vehicles running on harmful conventional fuels into CNG fuel in the Agartala Municipal Corporation (AMC) area under three intervention scenarios has been undertaken and analyzed.", "mime": "application/pdf"}, {"id": "cet-14731", "words": "3476", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14731", "date": null, "keywords": "carbon; emissions; footprint; ghg; scope; staff; students; university; year", "summary": "Based on the coefficient of determination, R\u00b2, for linear regression models between student and staff numbers and carbon footprint emissions for normal years (2015 to 2019) in Figure 4, the decline in students and staff could explain approximately 75.5%, 98.5%, and 99.9% of the variations in scope 1, 2, and 3 GHG emissions, respectively. During the COVID-19 period, students\u2019 commute reduction causes a substantial decrease in carbon footprint.", "mime": "application/pdf"}, {"id": "cet-14732", "words": "3301", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14732", "date": null, "keywords": "catalyst; co2; energy; gasification; situ; syngas; waste; yield", "summary": "High-temperature quasi-in-situ catalytic CO2-assisted gasification is better suited to achieve high syngas energy yield. In the case of waste tyres, the syngas yield and energy yields increased by 24% and 23%, respectively.", "mime": "application/pdf"}, {"id": "cet-14733", "words": "3892", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14733", "date": null, "keywords": "et al; extraction; food; glycosides; leaves; rebaudiana; solvent; stevia", "summary": "680 For sweetener extraction, crushed pre-treated stevia leaves (2 mm) were placed on analytical filter paper and dried (5g) were percolated with deionized water. Food Chemistry, 370, 130991. doi.org/10.1016/J.FOODCHEM.2021.130991 Castro-Puyana M, Marina ML, Plaza M., 2017, Water as green extraction solvent: Principles and reasons for its use.", "mime": "application/pdf"}, {"id": "cet-14734", "words": "3079", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14734", "date": null, "keywords": "blast; briquettes; dust; figure; furnace; mill; self; steel", "summary": "Table 1: Chemical analysis of LD steel mill dust and blast furnace collector dust LD steel mill dust FeTotal FeMetal SiO2 CaO MgO Na2O K2O Zn Al2O3 C S Fine (%) 58.45 17.55 1.91 11.31 1.91 0.09 0.40 0.07 0.25 0.60 0.07 Coarse (%) 58.13 42.55 3.12 18.34 3.16 0.03 0.18 0.06 0.30 0.64 0.05 BF collector dust (%) 41.49 - 9.07 2.90 0.50 0.18 0.26 0.21 2.64 32.84 0.29 Table 2: Granulometric analysis of LD steel mill dust and blast furnace collector dust LD steel mill dust Retained in mesh 2 mm 1 mm 0.355 mm 0.125 mm 0.045 mm Pan Fine (%) 8.62 3.99 8.27 17.1 21.75 40.28 Coarse (%) 2.65 4.92 19.63 36.25 20.51 16.04 BF collector dust (%) 0.58 0.9 3.88 38.53 40.0 1.11 2.2 Preparation of the briquettes Since the primary steel mill dust is produced in dry conditions and with the presence of free lime, its prior stabilization by hydration was necessary to avoid early cracks and breakage in the briquettes (Alvarado Quintanilla, 2017).", "mime": "application/pdf"}, {"id": "cet-14735", "words": "4272", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14735", "date": null, "keywords": "control; nitrogen; plant; rhizobium; strains; treatments; vulgaris; yield", "summary": "However, the efficiency of this process varies due to the diversity of rhizobia species and legumes, as well as environmental conditions (Hor\u00e1cio et al., 2024). Were found non- significant results, similar to previous studies (L\u00f3pez-Alcocer et al., 2020), but we also observed significant variations in other research (Hor\u00e1cio et al., 2024), indicating the influence of specific environmental factors on BNF.", "mime": "application/pdf"}, {"id": "cet-14736", "words": "4204", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14736", "date": null, "keywords": "articles; energy; et al; green; hydrogen; hydrogen production; production; water", "summary": "These findings, though limited, emphasize the critical role of water in green hydrogen production. Huang & Liu (2020) analyze the potential for green hydrogen production in China from solar and wind energy.", "mime": "application/pdf"}, {"id": "cet-14737", "words": "4071", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14737", "date": null, "keywords": "bread; drying; fruit; moisture; product; temperature; time", "summary": "The Taguchi design was used with 8 treatments that were formulated through the following factors: OD concentration (40-60\u00b0Brix), OD temperature (20-40\u00b0C), OD time (1-8hr), HAD temperature (45-65\u00b0C) and HAD time (1-2hr), at 5% significance. 3. Results and Discussion 3.1 Optimizaci\u00f3n de los par\u00e1metros del proceso de deshidrataci\u00f3n Table 1 presents the results of the variable (% final moisture) of the dehydrated tree bread, showing that the lowest percentage of moisture was reported with T4 (40\u00b0 Brix, 40\u00b0C, 8hrs in OD and at 65\u00baC, for 2 hrs in HAD drying) and T6 (60\u00b0 Brix, 20\u00b0C, 8hrs in OD and at 65\u00baC, for 2 hrs in HAD drying) with averages of 16.75 and 16.23% moisture, respectively.", "mime": "application/pdf"}, {"id": "cet-14738", "words": "2637", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14738", "date": null, "keywords": "acid; analysis; bird; gallus; mass; nest; peptide; protein; sample", "summary": "The identification of proteins is based on matching molecular masses of peptides against protein databases. The identification of peptide fragments relied on the manifestation of ions m/z in a multi-charged state Notably, our study omitted the analysis of peptide fragments with a 1+ charge due to their unreliable detection outcomes.", "mime": "application/pdf"}, {"id": "cet-14739", "words": "3962", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14739", "date": null, "keywords": "activity; antioxidant; compounds; dpph; extraction; frap; methanol; purslane; solvent; tfc; tpc", "summary": "The FRAP method showed higher antioxidant activity values than the DPPH method. Acetone (B) Methanol (C) Ethanol (D) TPC TFC DPPH FRAP 1 0.00 0.00 50.00 50.00 1.220 \u00b1 0.059bc 1.078 \u00b1 0.031e 0.452 \u00b1 0.005bc 5.440 \u00b1 0.423b 2 50.00 0.00 50.00 0.00 0.938 \u00b1 0.020a 0.552 \u00b1 0.004a 0.438 \u00b1 0.006b 3.587 \u00b1 0.050a 3 0.00 0.00 0.00 100.00 1.399 \u00b1 0.026cd 1.397 \u00b1 0.097fg 0.405 \u00b1 0.017a 9.633 \u00b1 0.398f 4 0.00 50.00 0.00 50.00 2.037 \u00b1 0.158ef 1.564 \u00b1 0.064h 0.474 \u00b1 0.012cd 7.713 \u00b1 0.330e 5 50.00 50.00 0.00 0.00 2.190 \u00b1 0.047f 0.788 \u00b1 0.015cd 0.483 \u00b1 0.009de 5.627 \u00b1 0.202bc 6 0.00 0.00 100.00 0.00 1.450 \u00b1 0.039d 1.776 \u00b1 0.087i 0.556 \u00b1 0.012g 10.100 \u00b1 0.172f 7 50.00 0.00 0.00 50.00 1.199 \u00b1 0.071bc 0.604 \u00b1 0.023ab 0.496 \u00b1 0.005def 3.833 \u00b1 0.122a 8 0.00 33.33 33.33 33.33 1.262 \u00b1 0.014bcd 1.285 \u00b1 0.007f 0.452 \u00b1 0.005bc 7.567 \u00b1 0.147e 9 0.00 50.00 50.00 0.00 2.614 \u00b1 0.170g 1.523 \u00b1 0.046gh 0.601 \u00b1", "mime": "application/pdf"}, {"id": "cet-1474", "words": "3039", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-1474", "date": null, "keywords": "biogas; electricity; energy; food; malaysia; management; msw; waste", "summary": "Food waste is a potential feedstock for biogas generation. It is concluded that approximately 60 Mm3 of CH4, which is equivalent to 16.3 MW electricity can be produced yearly based on food waste generated on year 2010.", "mime": "application/pdf"}, {"id": "cet-14740", "words": "3843", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14740", "date": null, "keywords": "absorption; chemical; co2; column; gas; plant; process; regeneration; solvent; steel", "summary": "Nowadays, several technologies are available to reduce process plant emissions, such as Carbon Capture, Utilization and Storage (CCUS), that have started to be considered also for processes producing biogenic CO2, as in Waste-to-Energy (WtE) plants (Pellegrini et al., 2023, Moioli et al., 2024). Conclusions This work has focused on the study of CO2 removal within the context of a steel plant.", "mime": "application/pdf"}, {"id": "cet-14741", "words": "3335", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14741", "date": null, "keywords": "fluid; model; rate; shear; viscosity", "summary": "3. Results and discussion 3.1 Comparison with experimental data and various viscosity model The results obtained from a series of CFD simulations using various viscosity models with different Reynolds numbers were conducted to provide viscosity\u2013shear rate relationship as illustrated in Figure 2. Nomenclature \ud835\udf0c\ud835\udf0c \u2013 density of fluid, kg/m3 \ud835\udc96\ud835\udc96 \u2013 velocity vector, m/s \ud835\udefb\ud835\udefb \u2013 pressure, Pa \ud835\udf02\ud835\udf02 \u2013 dynamic viscosity of fluid, kg/(m s) \ud835\udf49\ud835\udf49 \u2013 stress tensor or shear stress, Pa \ud835\udc03\ud835\udc03 \u2013 symmetric rate of strain tensor, 1/s \ud835\udc5b\ud835\udc5b \u2013 flow behavior index, - \ud835\udc3e\ud835\udc3e \u2013 flow consistency index, Pa sn \ufffd\u0307\ufffd\ud835\udefe \u2013 shear rate of the fluid flow, 1/s \ud835\udf07\ud835\udf070 \u2013 initial viscosity, kg/(m s) \ud835\udf07\ud835\udf07\u221e \u2013 infinite viscosity, kg/(m s) \ud835\udc3e\ud835\udc3e\u2217 \u2013 modified consistency index of \ud835\udc3e\ud835\udc3e, - \ud835\udf06\ud835\udf06 \u2013 time constant for proposed viscosity model, s \ud835\udf03\ud835\udf03 \u2013 scale factor for time constant \ud835\udf06\ud835\udf06, - Regen \u2013 generalized Reynolds number, - \ud835\udc48\ud835\udc48 \u2013 imposed average velocity, m/s \ud835\udc5a\ud835\udc5a \u2013 time constant for Cross power law model, s \ud835\udc58\ud835\udc58 \u2013 time constant for Bird\u2013Carreau model, s \ufffd\u0307\ufffd\ud835\udefe\ud835\udc50\ud835\udc50 \u2013 critical shear rate, 1/s \ufffd\u0307\ufffd\ud835\udefe\ud835\udc4f\ud835\udc4f \u2013 breakthrough shear rate, 1/s References Bird R.B. and Carreau P.J., 1968, A Nonlinear Viscoelastic Model for Polymer Solutions and Melts\u2013I, Chemical Engineering Science, 23, 427 \u2013 434.", "mime": "application/pdf"}, {"id": "cet-14742", "words": "2912", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14742", "date": null, "keywords": "bioremediation; biosorption; compost; growth; metal; mhsd_36; soil; strain", "summary": "2.5 Experimental design A five-coded levels central composite design (CCD) was used to determine the impact of the carbon (glucose) and nitrogen (peptone) on Pb biosorption. The impact of nitrogen and carbon on Pb biosorption by the cell wall Biostimulation provides bacteria with important nutrients and micronutrients for biomass growth to support biosorption.", "mime": "application/pdf"}, {"id": "cet-14743", "words": "3450", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-14743", "date": null, "keywords": "algaroba; bioethanol; biomass; et al; ethanol; juliflora; production; prosopis", "summary": "Naseeruddin, S. et al., 2021, Co-culture of Saccharomyces cerevisiae (VS3) and Pichia stipitis (NCIM 3498) enhances bioethanol yield from concentrated Prosopis juliflora hydrolysate, Biotech, 21. Naseeruddin, S. et al., 2017, Ethanol production from lignocellulosic substrate Prosopis juliflora.", "mime": "application/pdf"}, {"id": "cet-14744", "words": "3561", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14744", "date": null, "keywords": "citizen; data; episodes; odour; plausibility; project; records; science; standard", "summary": "\u2022 Odour record data: date, time, location, odour character, hedonic tone and intensity of each record. Odour records form Several tools must be available and accessible to any population level to report a perceived odour, ranging from the manual format (completed within 24 hours of the observation) to any available digital or computerised form.", "mime": "application/pdf"}, {"id": "cet-14745", "words": "3834", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14745", "date": null, "keywords": "flocculant; odour; remediation; samples; sludge; soil; tma", "summary": "The transition of fresh to old sludge occurs by air drying the sludge in storage houses at the site location. Mixture sludge (50/50) + mixture flocculant (50/50) + Calstarite 10 g fresh sludge + 10 g old sludge + 1 g ZETAG 8127 + 1 g FLOC PAM + 1 g Calstarite ID 9 Mixture sludge (50/50) + mixture flocculant (50/50) +", "mime": "application/pdf"}, {"id": "cet-14746", "words": "3275", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-14746", "date": null, "keywords": "authorization; emissions; environmental; guidelines; impact; odour; odour emissions; oue; sources", "summary": "The key principles: installations and activities with potential odour impacts and applications for emission permits In the light of the legal basis of the guidelines and the concepts of emissions into the atmosphere and odour emissions, the authors of the document propose two fundamental principles: a) the permit for emissions into the atmosphere and, consequently, the AUA (Unified Environmental Authorization), are entitled, in the case of installations and activities with a potential odour impact, to regulate odour emissions; b) applications for air emissions permits and AUA applications for establishments with installations/activities having a potential odour impact must therefore contain a description and an assessment of the odour emissions. In Italy, the legislation relating to odour emissions has been lacking for many years and, only recently, a series of new concepts relating to odour emissions have been included in Legislative Decree 152/06.", "mime": "application/pdf"}, {"id": "cet-14747", "words": "3631", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14747", "date": null, "keywords": "biogas; emissions; landfill; lfg; methane; odour; qogi; rate; surface; wells", "summary": "While recent studies have addressed odour emission issues from the landfill surface, there is a notable gap in research focusing on the impact of fugitive biogas emissions on odour impact assessment. This paper proposes an approach for estimating the impact of fugitive biogas emissions on overall odour emissions from a non- hazardous landfill that collects biogas through a network of over 408 vertical wells.", "mime": "application/pdf"}, {"id": "cet-14748", "words": "2756", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14748", "date": null, "keywords": "amiata; area; emissions; gas; geothermal; odour; spot", "summary": "Moreover, the detected odour concentrations are far higher than the ones usually detected in industrial emissions: despite the few available emission limits, expressed in odour concentration, are in the order of 102\u00f7103 ouE/m3 (Pinasseau et al., 2018), the values found in endogenous gas emissions are in the order of millions of ouE/m3. Overall Mt. Amiata measured spot vent emission rates.", "mime": "application/pdf"}, {"id": "cet-14749", "words": "3624", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14749", "date": null, "keywords": "body; emission; flow; sampling; section; wind", "summary": "Comparison of emission rate values for odour and odorous chemicals derived from two sampling devices. Comparison of field inspections and dispersion modelling as a tool to estimate odour emission rates from landfill surfaces.", "mime": "application/pdf"}, {"id": "cet-1475", "words": "1967", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-1475", "date": null, "keywords": "air; conditioner; consumption; electricity; energy; temperature", "summary": "Figure 7: Correlation between daily air conditioner electric consumption and outdoor air temperature for 10 dwellings during measurement period. The similar condition is also observed for air conditioner usage which is fluctuated from 0.2 to 23.7 kWh.", "mime": "application/pdf"}, {"id": "cet-14750", "words": "3933", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14750", "date": null, "keywords": "emission; flow; hood; odour; rate; sampling; sources; surface", "summary": "Brancher M., Griffiths K. D., Franco D., de Melo Lisboa H., 2017, A review of odour impact criteria in selected countries around the world, Chemosphere, 168, 1531-1570, https://doi.org/10.1016/j.chemosphere.2016.11.160 Capelli L., Sironi S., Del Rosso R., Centola P., 2009a, Design and validation of a wind tunnel system for odour sampling on liquid area sources, Water Science and Technology, 59(8), 1611-1620, https://doi.org/10.2166/wst.2009.123 Capelli Laura, Sironi S., Del Rosso R. Centola, P., 2009b, Predicting odour emissions from wastewater treatment plants by means of odour emission factors, Water Research, 43(7), 1977\u20131985, https://doi.org/10.1016/j.watres.2009.01.022 CEN, 2022, EN13725:2022 - Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate, Brussels Frechen F. B., Frey M., Wett M., L\u00f6ser C., 2004, Aerodynamic performance of a low-speed wind tunnel, Water Science and Technology, 50(4), 57-64, https://doi.org/10.2166/wst.2004.0220 Gillot S., H\u00e9duit A., 2008, Prediction of alpha factor values for fine pore aeration systems, Water Science and Technology, 57(8), 1265-1269, https://doi.org/10.2166/wst.2008.222 Gostelow P., Longhurst P. J., Parsons S., Stuetz R. M., 2003, Sampling for measurement of odours, IWA publishing, https://doi.org/https://doi.org/10.2166/9781780402819 Hudson N., Ayoko G. A., 2008a, Odour sampling 1: Physical chemistry considerations, Bioresource Technology, 99(10), 3982-3992, https://doi.org/10.1016/j.biortech.2007.04.034 41 Hudson N., Ayoko G. A., 2008b, Odour sampling. 2.1 External factors affecting passive area surface sampling The information provided by the official guidelines regarding the characterisation of passive surface sources, offering practical suggestions for monitoring odour emissions from such sources, can be very useful.", "mime": "application/pdf"}, {"id": "cet-14751", "words": "3036", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14751", "date": null, "keywords": "concentration; emission; monitoring; odour; pid; sampling; source; terms", "summary": "Annex 2 of Ministerial Directive No. 309 of June 28, 2023, regarding sampling (MASE, 2023), specifies that: - to verify compliance with emission limits, sampling must be conducted with the plant in operation under conditions leading to the maximisation of odour emissions. In general, the following situations can be considered: - Emissions that can be considered characterised by reasonably constant emission levels, both in terms of flow (Nm3/h) and chemical characteristics, and consequently, in terms of odour emissions. - Emissions which are not reasonably constant and must be characterised by sampling multiple gaseous portions, each representative of a different emission condition of interest, possibly taken at the most critical moment from the perspective of odour emissions.", "mime": "application/pdf"}, {"id": "cet-14752", "words": "3434", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14752", "date": null, "keywords": "marine; no3; odorants; oxidants; products; site; x10", "summary": "Barczak, R. J., Mo\u017caryn, J., Fisher, R. M., & Stuetz, R. M. (2022). Chapleski, R. C., Zhang, Y., Troya, D., & Morris, J. R. (2016).", "mime": "application/pdf"}, {"id": "cet-14753", "words": "3760", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14753", "date": null, "keywords": "4m4mp; analysis; emissions; episode; odour; samples; study; water", "summary": "In this work, we present a case study of a serious odour episode in Barcelona, where odour emissions from the painting section of an automobile factory, with odour concentrations up to 32,768 uoE/m3 and emission rates up to 8,175 MuoE/h caused significant nuisances near the city centre, about 6 km away from the plant. In order to reliably characterize odour-related problems, to detect the possible sources of odour episodes and to correctly choose and implement the possible solutions (such as deodorisation systems, \u201cad-hoc\u201d actions, etc.), especially in cases of emissions with highly complex compositions, it is often not sufficient to know the odour concentration in the emissions and/or its extrapolation to immission levels by means of dispersion modelling, as this approach may carry a potential risk that inconclusive or even erroneous conclusions.", "mime": "application/pdf"}, {"id": "cet-14754", "words": "2540", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14754", "date": null, "keywords": "compounds; monitoring; shelter; temperature", "summary": "Figures 1, 2, 3 and 4 represent examples of chromatograms obtained for each auto-GC: Figure 1: Internal gas standard chromatogram obtained on the auto-GC/FID monitoring aldehydes and ketones 63 Figure 2: Internal gas standard chromatogram obtained on the auto-GC/FID monitoring amines Figure 3: Ambient air chromatogram obtained on the chromaTHC Figure 4: Chromatogram of a mixture of sulfur compounds obtained on the TRSMEDOR 64 Table 1 represents the various compounds and/or family of compounds analyzed, their range of concentrations, their low detection limit (LDL) and some values of odor threshold: Table 1: Compounds and family of compounds analyzed, range of concentrations, LDL and odor threshold Compounds Max concentration before the deodorization process (ppm) Max concentration after the deodorization process (ppm) Low Detection Limit (ppm) The presence of odorous compounds presents issues for both ambient air pollution and specific industrial processes.", "mime": "application/pdf"}, {"id": "cet-14755", "words": "3905", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14755", "date": null, "keywords": "air; analysis; carpet; compounds; odour; office; sample; smell; sniffing; voc", "summary": "Thus evaluation of odour compounds, but also their identification with mass spectral information is achieved (Hayes et al., 2023). 68 Overall, the direct sensory evaluation of odour samples in this lab setting provides valuable insights that are not achievable through concentration measurement alone.", "mime": "application/pdf"}, {"id": "cet-14756", "words": "2916", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14756", "date": null, "keywords": "biosolids; centrifuge; emissions; loading; odour; odp; samples; storage", "summary": "For centrifuge biosolids, the two panellists detected \u2018putrid-like sulfur\u2019, \u2018musty earthy\u2019, and \u2018musty chemical\u2019 in more than half of the overall samples. \u2018Fishy\u201d MF (%) ranged from 61% to 79% for centrifuge biosolids, and from 35% up to 93% for out-loading.", "mime": "application/pdf"}, {"id": "cet-14757", "words": "3187", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-14757", "date": null, "keywords": "activity; assessment; exposure; panellists; risk; samples", "summary": "82 After all the experimental observations, it is possible to affirm that a standard values for all the exposure parameters necessary to conduct risk assessment cannot be defined in the case of exposure risk of panellists. Probabilistic methods can handle these complexities by allowing for the incorporation of multiple sources of variability and dependencies among variables, providing a more comprehensive evaluation of exposure risks.", "mime": "application/pdf"}, {"id": "cet-14758", "words": "3112", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-14758", "date": null, "keywords": "approach; areas; case; citizen; data; odour; pilot; pollution; stakeholders; thessaloniki", "summary": "The paper outlines a collaborative approach aimed at defining specific steps for co-designing processes to address odour issues locally, with Thessaloniki as a pilot case. The paper aims to outline a collaborative approach aimed at defining specific steps for co-designing processes to address odour issues locally, with Thessaloniki as a pilot case.", "mime": "application/pdf"}, {"id": "cet-14759", "words": "2934", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-14759", "date": null, "keywords": "chemical; compounds; detector; fid; odour; pfpd; sulphur", "summary": "By observing the emission profile, we can detect and measure the presence of sulphur compounds. For this reason, the detection of sulphur compounds, present in low concentrations, in complex real samples and mostly in odorous samples is a challenge.", "mime": "application/pdf"}, {"id": "cet-1476", "words": "4081", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-1476", "date": null, "keywords": "building; dissatisfaction; environment; green; ieq; occupants; parameters; productivity; quality; study; work", "summary": "Consequently, after a decade POE studies and data collection, it is found that the most important characters of IEQ can be divided in two DOI: 10.3303/CET1756065 Please cite this article as: Esfandiari M., Zaid S.M., Ismail M.A., Aflaki A., 2017, Influence of indoor environmental quality on work productivity in green office buildings: a review, Chemical Engineering Transactions, 56, 385-390 DOI:10.3303/CET1756065 385 parameters, one related to energy that normally affects human physiology, and one influencing human psychology. Pei Z., Lin B., Liu Y., Zhu Y., 2015, Comparative study on the indoor environment quality of green office buildings in China with a long-term field measurement and investigation, Building and Environment, 84, 80-88.", "mime": "application/pdf"}, {"id": "cet-14760", "words": "2500", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14760", "date": null, "keywords": "air; chemical; device; gas; ppm; sensors; smartwatch; toluene", "summary": "Electronic noses, also called e-noses are formed by the combination of different gas sensors that transform an odor into an electrical signal and a pattern recognition system (Di Pizio et al., 2020). The main advantage of this device is the inclusion of gas sensors in a smartwatch to detect air pollutants, for that reason the device is optimal for users to monitor the surrounding air quality.", "mime": "application/pdf"}, {"id": "cet-14761", "words": "4420", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14761", "date": null, "keywords": "clean; concentration; data; dilution; ioms; monitoring; odour; sampling; sensor; system", "summary": "The primary design issues addressed include: 1) decreasing relative humidity through controlled dilution, 2) implementing hardware and software adjustments to account for temperature fluctuations during extended operation and 3) developing algorithms to establish correlations between odour concentrations obtained through sampling/measurement according to EN 13725:2022 and the instrumental odour concentration provided by IOMS. On the other hand, while emissions are often well-defined in terms of sampling procedures for analysing odour concentration, especially for stationary emission sources (as outlined in EN 13725:2022), there is little emphasis on continuous monitoring specifically aimed at detecting odour compounds.", "mime": "application/pdf"}, {"id": "cet-14762", "words": "2675", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14762", "date": null, "keywords": "ch4; co2; concentrations; figure; gas; sensors; sno2; zno", "summary": "The ZnO and SnO2 sensors responded when exposed to a CH4 atmosphere. Table 1: Sensors dispersions of nanoparticles Sensor Material MOS NP diameter (nm)", "mime": "application/pdf"}, {"id": "cet-14763", "words": "2769", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14763", "date": null, "keywords": "analysis; day; fish; freshness; nose; quality; samples; sensors; storage", "summary": "Keywords: fresh fish, electronic nose, shelf life, quality assessment. Given the limitations of traditional analysis techniques for assessing fish freshness, emerging technologies like electronic noses (E-nose) offer a promising solution.", "mime": "application/pdf"}, {"id": "cet-14764", "words": "3645", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14764", "date": null, "keywords": "accuracy; alexandria; blood; cancer; diagnosis; et al; learning; machine; mohamed; nose; samples; svm", "summary": "3. Results and Discussion Based on specific tumour markers for cancer diagnosis, the study was carried out on 550 participants with an age range of 49 to 70 years, finally categorized into CLL (n = 100), GBM (n = 50), IDC (n = 150), HCC (n = 50), AC (n = 50), and HC (n = 150). With a scoring time of only 0.02 s, the SVM model was ideal for real-time applications of cancer diagnosis (Meshref et al., 2023).", "mime": "application/pdf"}, {"id": "cet-14765", "words": "3273", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14765", "date": null, "keywords": "air; analysis; bat; biofilter; concentration; odour; olfactometry", "summary": "Conclusions Through years of investigating odour emission reduction techniques at rendering facilities and slaughterhouses by combining olfactometry with sensorial analysis, it became clear that olfactometry as stand-alone analysis often lacks the required potential to correctly determine the odour removal efficiency of the technique. Odour emissions are a complex mixture of volatile chemicals and therefore cannot be completely assessed by a stand-alone odour monitoring technique (Mu\u00f1oz et al., 2010).", "mime": "application/pdf"}, {"id": "cet-14766", "words": "3237", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14766", "date": null, "keywords": "concentrations; h2s; kunak; levels; monitoring; odour; plant; sensor", "summary": "3. Results and discussion 3.1 Water waste treatment plant The temporal variation of H2S concentrations measured by both the Kunak AIR Pro (blue line) and the H2S analyser (red line) are illustrated in Figure 2. In the WWTP, the performance of the system to monitor H2S was evaluated against a H2S analyser showing a high correlation coefficient of 0.77 and a MAE of 6.9 ppb demonstrating the reliability and accuracy of this system for H2S monitoring.", "mime": "application/pdf"}, {"id": "cet-14767", "words": "3638", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14767", "date": null, "keywords": "concentration; data; ioms; model; odour; odour concentration; olfactometry; training; value", "summary": "2.2.4 Model testing Once developed, the model was uploaded to the IOMS analysing the gas stream entering the scrubber, with the aim of recognizing anomalous odour concentration values entering the abatement system. This paper investigates the potentiality of an approach for odour quantification based on Support Vector Regression, which is suitable to deal with non-linear data and it is also able to account for the uncertainty of the reference method for measuring odour concentration, i.e. dynamic olfactometry.", "mime": "application/pdf"}, {"id": "cet-14768", "words": "3561", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14768", "date": null, "keywords": "ch4; co2; concentrations; emissions; gas; landfill; monitoring; ppm; sensors; surface", "summary": "Technology scouting and selection of a first set of gas sensors to be tested Considering the outcomes of the bibliographic research study focused on the identification of the gaseous compounds in landfill surface emissions and their expected concentrations in ambient air over the landfill surface, we decided to focus on CH4 as main target compound to be detected, both because of its relative abundance (about 50% in landfill gas) and because of its high GH potential. Such activities included: (1) identification of environmentally relevant gases associated with landfill site surface emissions and their concentration ranges; (2) technology scouting of the commercial sensors available on the market and selection of a first set of gas sensors suitable for this application, which were evaluated based on their cost, power consumption, and detection range, as declared by the manufacturer and/or by the scientific literature; (3) preliminary lab testing with relevant gases of the sensors identified in (2) for a first screening and further selection of a subset of sensors to be effectively implemented in the first version of the Sensors Toolbox.", "mime": "application/pdf"}, {"id": "cet-14769", "words": "3631", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14769", "date": null, "keywords": "air; air quality; children; data; development; health; learn; pollutants; project; quality; schools", "summary": "LEARN is a Horizon Europe project which aims to develop novel sensors to detect VOCs and UFPs, providing real-time monitoring of indoor air quality. By evaluating exposure levels and implementing remediation strategies using high-performance filtering systems, this research seeks to unlock a large technological potential to significantly improve indoor air quality in schools.", "mime": "application/pdf"}, {"id": "cet-1477", "words": "4319", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-1477", "date": null, "keywords": "biodiesel; energy; et al; glycerol; hydrogen; hydrogen production; process; production; reaction; reforming; steam; temperature", "summary": "Therefore, hydrogen production from renewable sources such as glycerol, is gaining attention. This article reviews on the latest development on hydrogen production from biodiesel waste.", "mime": "application/pdf"}, {"id": "cet-14770", "words": "2756", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14770", "date": null, "keywords": "calmet; calpuff; data; model; odour; prolor; run; system; wrf", "summary": "The dataset combines elevation data from various sources, including satellite altimetry, stereo photogrammetry, and topographic maps and offers elevation data at multiple resolutions, ranging from 7.5 arc-seconds (approximately 250 meters) to 30 arc-seconds (approximately 1 kilometre). Notably, CALMET can optionally utilize output from prognostic meteorological models like WRF.", "mime": "application/pdf"}, {"id": "cet-14771", "words": "2957", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14771", "date": null, "keywords": "exit; figure; lapmod; plume; rise; stack; temperature", "summary": "However, when the simulation is carried out with a dispersion model without specific algorithms for rain caps and horizontal stacks, US-EPA (1993) suggests to force the exit velocity to 0.001 m/s. AERMOD is discussed due to its importance, but it is not used in the simulations because it does not use exactly the same meteorology, as done by CALPUFF and LAPMOD. 2.1 AERMOD AERMOD (US-EPA, 2022a) can simulate both rain-capped stacks and horizontal stacks, which are associated to the POINTCAP and POINTHOR source types, respectively.", "mime": "application/pdf"}, {"id": "cet-14772", "words": "3333", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14772", "date": null, "keywords": "concentrations; configurations; lapmod; model; odour; peak; pmr; time", "summary": "This trend reverses in the far-field where static PMR revealed higher peak odour concentrations than dynamic PMR, although the discrepancy was somehow negligible. A critical and still partly unresolved issue is determining the most effective approach to estimate the short-term peak odour concentrations.", "mime": "application/pdf"}, {"id": "cet-14773", "words": "2646", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14773", "date": null, "keywords": "concentration; dispersion; odour; source; speed; wind", "summary": "1. Introduction Changes in emission sources, land use and topography influence odour concentrations (Arregoc\u00e9s and Rojano, 2023). This paper delineates a comparative analysis of odour concentrations from two sources across four different locations.", "mime": "application/pdf"}, {"id": "cet-14774", "words": "3635", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14774", "date": null, "keywords": "cooking; emission; impact; odour; oue; plant; rendering; scenario", "summary": "Secondly, simulations of predictive impact scenarios were conducted, assuming the introduction of odour emission containment systems for the macro-areas identified as the major contributors to impact. Secondly, simulations of predictive impact scenarios, assuming the introduction of odour emission containment systems for the macro-areas identified as the major contributors to impact, were conducted.", "mime": "application/pdf"}, {"id": "cet-14775", "words": "3378", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14775", "date": null, "keywords": "concentrations; h2s; m-3; odour; stage; system; treatment; wastewater", "summary": "Odour abatement efficiency Odour concentrations were monitored twice a week and Table 3 shows the results obtained for the olfactory tests carried out in accordance with EN 13725:2022 to correlate the H2S concentrations introduced into the system during the whole activity with the corresponding inlet and outlet odour concentrations. As regards the characterization and measurements, the most common technique for the determination of odour concentration is the dynamic olfactometry (DO), applied according to EN 13725:2022.", "mime": "application/pdf"}, {"id": "cet-14776", "words": "3043", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14776", "date": null, "keywords": "analysis; collection; concentration; emissions; management; odour; ofmsw; time; waste", "summary": "Characterization of the principal chemical-physical parameters and odour concentration at different times of the investigated OFMSW were performed. Preliminary results indicate a notable increasing trend in odour concentration over time, with an inverse correlation between odour concentration and humidity and a direct correlation with temperature.", "mime": "application/pdf"}, {"id": "cet-14777", "words": "3389", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14777", "date": null, "keywords": "bioactivator; collection; containers; emissions; experimental; odour; ofmsw; waste", "summary": "Different bioactivators have been studied and analyzed. Odour emissions from MSW management are among the main negative pressures perceived by the population.", "mime": "application/pdf"}, {"id": "cet-14778", "words": "3639", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14778", "date": null, "keywords": "biogas; characterization; emissions; landfill; management; odour; points; waste", "summary": "However, these samplings techniques are related to possible over estimation or under estimation of odour emissions (Oliva et al., 2021). These tools are also not adequate for the exhaustive characterization of odour emissions from landfill, especially in post- management phase (Naddeo et al., 2016).", "mime": "application/pdf"}, {"id": "cet-14779", "words": "3669", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14779", "date": null, "keywords": "conductivity; contact; deodorant; formulation; health; liquid; rpm; stirring; surface; tension", "summary": "In the preparation of liquid deodorant, it is crucial to determine the optimum process parameter to reduce the operating cost due to the energy consumption from the stirring. In the preparation of liquid deodorant, two main solid ingredients used were potassium alum and salt (sodium chloride).", "mime": "application/pdf"}, {"id": "cet-1478", "words": "2515", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-1478", "date": null, "keywords": "air; roof; sensor; soil; surface; temperature", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Peng Yen Liew, Wai Shin Ho, Jeng Shiun Lim Copyright \u00a9 2017, AIDIC Servizi S.r.l., ISBN 978-88-95608-47-1; ISSN 2283-9216 Thermal Performance and Temperature Mitigation towards Application of Green Roof in Tropical Climate Mahsan Mirnezhad, Asrul Mahjuddin Ressang Bin Aminudin, Kong Seng Yeap Department of Architecture, Faculty of Built Environment, University of Malaya (UM), Kuala Lumpur, Malaysia mahsanmirnezhad@gmail.com Many studies have been conducted to ascertain the implementation of green roofs provides many advantages including extended roof life, increase of water run off quality and mitigation of urban heat island effect. However, the lack of experimental data for tropical climate makes it difficult to evaluate eventually the suitability of green roofs as a heat mitigation and carbon emission reduction strategy in Malaysia.", "mime": "application/pdf"}, {"id": "cet-14780", "words": "3291", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-14780", "date": null, "keywords": "figure; fire; flame; height; impingement; impinging; jet; release; zhang", "summary": "Numerous studies have been conducted and assessed for geometrical flame features of jet flames as it imposed dangers where nearby equipment is included. Figure 1 Projected flame height of horizontal jet flames", "mime": "application/pdf"}, {"id": "cet-14781", "words": "3827", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14781", "date": null, "keywords": "atps; compounds; extraction; phase; phenolic; salt", "summary": "Results and Discussion 3.1 Impact of types of salt and phase composition Different salts exhibit distinctive salting-out abilities and have a great impact on the extraction efficiency of phenolic compounds in the ATPS (Pereira & Coutinho, 2019). Table 1: Effect of types of salt and phase composition on the K, Y, and DPPH scavenging activity of O. stamineus leaves phenolic compounds in EL-based ATPS Types of ATPS EL concentration, [% (w/w)] Salt concentration,", "mime": "application/pdf"}, {"id": "cet-14782", "words": "3604", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14782", "date": null, "keywords": "drilling; emulsifier; emulsion; invert; mud; oil; stability; water", "summary": "The experiment compared the performance of invert emulsion mud at different oil-water ratios (70/30, 80/20, 90/10) and temperatures (250\u00b0F and 400\u00b0F) to determine the optimum oil-water ratio and temperature for comparison with other primary emulsifiers. The gel strength of invert emulsion mud generally increases as the oil- to-water ratio increases, but this relationship is not uniform and may change depending on the exact composition of the oil-based mud (Palaoro et al., 2022).", "mime": "application/pdf"}, {"id": "cet-14783", "words": "3690", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-14783", "date": null, "keywords": "aloe; film; food; gel; starch; tps; vera", "summary": "AV gel films were the most transparent compared to films without AV gel. This is in agreement with the previous study that found the yellowness index of starch film incorporated with citric acid increased at 165 \u00b0C (Reddy and Yang, 2010).", "mime": "application/pdf"}, {"id": "cet-14784", "words": "3027", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14784", "date": null, "keywords": "analysis; corrosion; earthing; figure; rate; soil; tape", "summary": "In addition, soil type, soil resistivity, ionic content, and soil pH can be indicators of the ongoing corrosion of the transmission tower that uses galvanized tape as earthing electrode. The inconclusive results from previous research regarding the significance of soil properties towards corrosivity led to more questions for example, the unknown correlation between soil type and the corrosion rate of metal (in this case galvanized tape) which subsequently undetermined the lifespan of galvanized tape as an earthing electrode in various soil types for the maintenance purposes.", "mime": "application/pdf"}, {"id": "cet-14785", "words": "3800", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14785", "date": null, "keywords": "absorption; aerogels; alginate; hydrophobic; isolate; oil; protein; soy; spi; surface; water", "summary": "A high contact angle with nearly superhydrophobic and high oil absorption on the alginate/SPI aerogels indicates the successful surface modification of turning the hydrophilic alginate/SPI to hydrophobic in a simple functionalization process. Natural oil absorbents, such as aerogels, have gained attention for being low-cost, environmentally friendly, biodegradable, and sustainable.", "mime": "application/pdf"}, {"id": "cet-14786", "words": "3812", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14786", "date": null, "keywords": "coefficient; contact; flux; mass; membrane; permeate; size; transfer", "summary": "Zhang, J., Dow, N., Duke, M., Ostarcevic, E., Gray, S., 2010, Identification of material and physical features of membrane distillation membranes for high performance desalination, Journal of membrane science, 3491- 2, 295-303. There are two significant technologies in desalination process that are primarily used namely thermal desalination and membrane distillation (MD).", "mime": "application/pdf"}, {"id": "cet-14787", "words": "3855", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14787", "date": null, "keywords": "cellulose; co2; figure; hydration; mcc; membrane; mmms; pristine; pvdf; water", "summary": "The CO2 hydration rate of recorded 4.93 mM s-1, highlighting MCC incorporated PVDF membranes improves hydrophilicity and CO2 affinity, presenting a sustainable, low energy solution for CO2 capture. This marked more than 40 % improvement of 262 CO2 hydration in comparison with pristine PVDF membrane at 2.25 mM s-1 (Figure 3b).", "mime": "application/pdf"}, {"id": "cet-14788", "words": "3159", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14788", "date": null, "keywords": "batch; corrosion; gas; injection; pipeline; ppm; rate; test; vci", "summary": "Another report stated that internal pipeline corrosion caused more incidents than external pipeline corrosion. In Canada, for example, the Alberta Energy Regulator reported that 42% of 354 pipeline incidents were caused by internal pipeline corrosion (Pipeline Performance, 2023).", "mime": "application/pdf"}, {"id": "cet-14789", "words": "3655", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14789", "date": null, "keywords": "bio; coffee; coffee waste; energy; microwave; oil; pyrolysis; temperature; waste; yield", "summary": "ctchong@sjtu.edu.cn The potential of coffee waste to be valorised into useful bioenergy is investigated using a continuous microwave pyrolysis rig. Coffee waste of Arabica species was ground and pretreated prior to pyrolysis at elevated temperature under CO2 atmosphere.", "mime": "application/pdf"}, {"id": "cet-1479", "words": "3325", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-1479", "date": null, "keywords": "c3n4; ch3oh; ch4; co2; light; photocatalyst; reduction", "summary": "In this study, photocatalytic CO2 reduction to fuels over Cu-loaded graphitic carbon nitride (g-C3N4) under visible light irradiation has been investigated. In the recent years, there have been number of studies focused on photocatalytic CO2 reduction by g- C3N4 based photocatalyst.", "mime": "application/pdf"}, {"id": "cet-14790", "words": "3608", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14790", "date": null, "keywords": "biojet; catalysts; deoxygenation; fuel; hydrocarbons; metal; range; tio2; tmpe; transition", "summary": "It was found that using transition metal catalysts without reduction in a non-hydrogen environment could generate hydrocarbons with carbon chain lengths within the jet fuel range. The preparation of transition metal catalysts using a one-step process is simple and can be retrofitted into existing petroleum engineering facilities to increase the possibility of industrialisation compared to other preparation processes.", "mime": "application/pdf"}, {"id": "cet-14791", "words": "3672", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14791", "date": null, "keywords": "agriculture; choi; food; growth; hydroponic; pak; pgc; plant; relative; study; system; temperature", "summary": "2.6 Relative Growth Rate (RGR) The analysis of plant growth is the main key point used as an analytical tool for characterizing the plant's growth. Similar to the study of Hwang et al. (2018), the indoor and outdoor temperature correlates with the relative humidity, which can also affect plant growth in correlation to what type of illumination for photosynthesis was used, particularly with the plant subjects' hydration and its leaf net photosynthetic efficiency which is affected by lower humidity during high temperatures (Han et al., 2019).", "mime": "application/pdf"}, {"id": "cet-14792", "words": "3362", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14792", "date": null, "keywords": "biomass; content; cph; dryer; drying; hybrid; mode; moisture; solar", "summary": "The comprehensive analysis underscores the exceptional versatility and superior performance of the Modified Midilli I model across assessed CPH drying modes. The study also develops drying modelling utilizing thin drying models by analyzing moisture ratio.", "mime": "application/pdf"}, {"id": "cet-14793", "words": "3653", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-14793", "date": null, "keywords": "belief; fail; probabilities; work", "summary": "Probability theory has effectively been used to account for uncertainty embedded in the occurrence and severity of natural disasters as well as the extent of damage they may cause to structures and industrial plants. Compared with probability theory, the application of evidence theory to the domain of risk assessment and management has not been so widespread mainly due to a lack of efficient inference algorithms.", "mime": "application/pdf"}, {"id": "cet-14794", "words": "3966", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14794", "date": null, "keywords": "activity; afc1; agroforestry; experiment; microorganisms; soil; treatments", "summary": "Moreover, soil biology plays a fundamental role in its structure and composition, with organic matter decomposed by soil microorganisms that release nutrients for plants (Valdez-Nu\u00f1ez et al., 2019). Kandeler E., Gerber H., 1988, Short-term assay of soil urease activity using colorimetric determination of ammonium, Biology and Fertility of Soils, 6, 68\u201372.", "mime": "application/pdf"}, {"id": "cet-14795", "words": "3761", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14795", "date": null, "keywords": "euae; extraction; mae; min; mps; polysaccharides; psy; tpc", "summary": "2.4 Total flavonoid content (TFC) and antioxidant activity of the phenolic extract The total flavonoid content (TFC) expressed as mg quercetin equivalent (QE) per mL extract and the antioxidant activity was evaluated through DPPH free radical scavenging capacity according to (Tien et al., 2022) 308 2.5 Chemical structure of the obtained polysaccharides The chemical structure of obtained polysaccharides was determined by using an FT/IR \u2013 4700 spectrophotometers (Jasco, Japan). This technique offers numerous benefits, including high efficiency, low energy consumption, quick processing time, cost-effectiveness, and minimal solvent usage (Tran et al., 2023).", "mime": "application/pdf"}, {"id": "cet-14796", "words": "3348", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14796", "date": null, "keywords": "color; hue; image; indoor; lettuce; processing; quality; vif", "summary": "Recent advancements in image processing and artificial intelligence, particularly artificial neural networks (ANNs), have revolutionized agricultural practices by providing robust tools for crop monitoring and quality assessment as seen in the works of plant leaf disease classification 1 (Dubey and Choubey, 2024), indoor vertical farming (Garcillanosa et al., 2023 ) and plant disease identification (Perumal et al., 2024). Research has demonstrated the effectiveness of using ANNs for image processing in agricultural applications.", "mime": "application/pdf"}, {"id": "cet-14797", "words": "3691", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14797", "date": null, "keywords": "city; demand; energy; generation; hydrogen; model; shanghai; system; wind", "summary": "Wind energy system and solar PV energy system are selected as the input sources of the electrolyser because of their availability across the globe and energy independence from fossil fuels. Across these studies, scholars have widely acknowledged that the potential of hydrogen as a key element in urban energy systems, despite their approaches and focuses vary.", "mime": "application/pdf"}, {"id": "cet-14798", "words": "3663", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14798", "date": null, "keywords": "consumption; electricity; emissions; energy; factories; ghg; scenario; thailand; total", "summary": "Industrial sectors GHG emissions in Scope 1 only (ktCO2e/y) GHG emissions in Scope 1 and 2 (ktCO2e/y) Total annual emission (% of total) Scenario 1 (S1) 740 100.00 44,534.05 100.00 S1-1: GHG emissions > 15,000 tCO2e 101 13.65 43,337.18 97.31 S1-2: GHG emissions > 20,000 tCO2e 90 12.16 43,146.59 96.88 S1-3: GHG emissions > 25,000 tCO2e 79 10.68 42,901.22 96.33 Scenario 2 (S2) 704 100.00 10,800.05 100.00 S2-1: GHG emissions > 15,000 tCO2e 65 9.23 9,603.17 88.92 S2-2: GHG emissions > 20,000 tCO2e 55 7.81 9,429.98 87.31 S2-3: GHG emissions > 25,000 tCO2e 45 6.39 9,205.23 85.23 Scenario 3 (S3) 1,259 100.00 23,124.88 100.00 S3-1: GHG emissions > 15,000 tCO2e 200 15.89 18,613.10 80.49 S3-2: GHG emissions > 20,000 tCO2e 160 12.71 17,909.65 77.45 S3-3: GHG emissions > 25,000 tCO2e 129 10.25 17,210.76 74.43 4.", "mime": "application/pdf"}, {"id": "cet-14799", "words": "3242", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14799", "date": null, "keywords": "analysis; chiang; energy; gap; ghg; hotel; mai; tourism; transport", "summary": "According to the definition of the United Nations World Tourism Organization (UNWTO), sustainable tourism is tourism that considers environmental, economic, and social impacts, both present and future, including the needs of tourists, industry, the environment and local communities for creating the right balance (WTTC, 2021). There are many ways of sustainable tourism; e.g., green tourism that focuses on environmentally friendly tourism activities (Dory, 2023), community-based tourism that emphasizes on the process of participation in managing the natural and cultural capital of the community to create maximum benefits, and ecotourism that is not only an appreciation of nature, but also helps in creating economic opportunities for local communities (Furqan et al., 2010).", "mime": "application/pdf"}, {"id": "cet-1480", "words": "3963", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-1480", "date": null, "keywords": "crowding; factors; hajj; internal; level; management; mina; pilgrims; research; signage; strategies", "summary": "badralsolami@gmail.com Devotional and ritual observance by internal pilgrims to Hajj presents a constant journey towards fulfilling the fifth pillar of Islam. Although, internal pilgrims are within their geographical domain, the large number of pilgrims visiting Mina at a given time stimulates crowding perception.", "mime": "application/pdf"}, {"id": "cet-14800", "words": "2775", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-14800", "date": null, "keywords": "carbon; chemical; emissions; footprint; kgco2e/; material; pcf; production; waste", "summary": "Generation of energy utilities purchased contributes up to 17 % of GHG emissions, followed by on-site steam production (5 %) to meet the electrical and thermal energy demand of Chemical A production. The PCF profile breakdown for Chemical A based on one-year data of fiscal year 2021 are presented in Table 3 and Figure 2. 28 Table 3: GHG emissions from the life cycle stages of Chemical A production Life cycle stage Activity GHG emissions (t CO2e) CFP (kg CO2e/ kg) Percentage contribution Raw Material Acquisition Raw material manufacturing and preprocessing 28,106.31 2.871 76.9 % T&D of raw materials 264.42 0.027 0.72 % Generation of energy utilities purchased 6,126.40 0.626 16.8 % Material storage and handling 0.56 0.0001 0.002 % Production Steam generation 1,860.00 0.190 5.09 % Manufacturing 30.42 0.003 0.08 % Wastewater treatment 11.62 0.001 0.03 % Waste treatment 139.42 0.014 0.38 % Total 36,435.46 36,435.46 3.73 Figure 2: Product carbon footprint profile of Chemical A. 3.1 Detailed Emission Sources Emissions from raw material extraction were significant, accounting for approximately 77 % of the total carbon footprint.", "mime": "application/pdf"}, {"id": "cet-14801", "words": "3105", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14801", "date": null, "keywords": "anaerobic; biochar; biogas; digestion; loading; process; yield", "summary": "Response surface methodology (RSM) Box-Benken design (BBD) was utilised to investigate the impact of critical process parameters: temperature, co-substrate loading rate, and Biochar loading rate on biogas yield. According to Moretta (2023), enhancing biogas yield and quality can be achieved by implementing process optimization techniques, such as substrate pretreatment procedures and the utilization of additional materials (Obileke et al., 2024).", "mime": "application/pdf"}, {"id": "cet-14802", "words": "3102", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14802", "date": null, "keywords": "concentration; ice; pfc; quality; rainfall; rainwater; roof; supercooling; tds; time", "summary": "This paper investigated the relationship between independent variables (initial rainwater quality, circulation time) and dependent variables (yield, effective partition coefficient (K), removal efficiency) and discussed the effect of PFC on rainwater TDS, pH, colour and turbidity. A linear regression model and Pearson correlation coefficient (\u03c1), Eq(1) were used to determine the relationship between rainfall amount, ADD and rainwater TDS, where cov is covariance and \u03c3 is standard deviation (Steiner, 2008).", "mime": "application/pdf"}, {"id": "cet-14803", "words": "3545", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-14803", "date": null, "keywords": "carbon; consumption; data; electricity; emissions; footprint; scope; study; waste", "summary": "Researchers have started quantifying carbon emissions because of a growing emphasis on global carbon emissions (Liu & Liang, 2017), which is crucial for understanding emissions sources and implementing reduction strategies because of the growing significance of sustainable development (Cabeza et al., 2014). Total carbon emissions were calculated based on the specified operational boundaries.", "mime": "application/pdf"}, {"id": "cet-14804", "words": "3610", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14804", "date": null, "keywords": "acid; cost; demand; market; philippines; php; pla; plant; polymerization; process; production; weight", "summary": "PLA production boasts energy efficiency, consuming 25 % - 55 % less energy than petroleum-based polymers, with the potential for further reductions in the future. The total annual plant capacity for PLA production, sourced from imports in China, South Korea, Italy, and Belgium, stands at precisely 30,032 t. Table 1: Plant Capacity of PLA based on PLA imports in China, South Korea, Italy, and", "mime": "application/pdf"}, {"id": "cet-14805", "words": "4252", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14805", "date": null, "keywords": "energy; engineering; extrusion; machine; materials; pet; plastic; recycling; screw; shredder; shredding; waste", "summary": "Kumar et al. (2021) researched to increase production by building a Double Screw Extrusion Machine for PET plastic waste recycling, that produced encouraging outcomes in terms of melt yield for filament applications. Raji et al. (2020) developed a shredder machine with a new blade design to accommodate an average of 50 kg of waste plastic for processing.", "mime": "application/pdf"}, {"id": "cet-14806", "words": "3515", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14806", "date": null, "keywords": "agglomeration; dia; gti; industrial; model; sia; tfee", "summary": "In addition, as an important driving force for social change and an important carrier of technological change, the digital economy have an important impact on industrial agglomeration areas (Yan et al., 2023). Perspectives on the Collision of Digital and Green Neng Shen, Lin Zhang* School of Economics and Management, Fuzhou University, Fuzhou, 350108, PR China zhanglin_daniel@163.com Industrial agglomeration is an important way to affect total factor energy efficiency (TFEE), and digitalization level (DL) and green technology innovation (GTI) can help improve the effect of industrial agglomeration.", "mime": "application/pdf"}, {"id": "cet-14807", "words": "3534", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14807", "date": null, "keywords": "acid; binding; bioactive; components; compounds; kcal; mol; protease; tawa", "summary": "In Table 3 predicts the BBB penetration of compounds: bioactive components with a (+) value are likely to cross the BBB, while those with a (-) value are not. The toxicity analysis evaluates the predicted toxicity of Euphorbia hirta l. bioactive components.", "mime": "application/pdf"}, {"id": "cet-14808", "words": "3938", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14808", "date": null, "keywords": "a.soli; height; infection; leaf; plants; root; soli; stage; stem; tomato", "summary": "Results and discussion 3.1 Isolation of A. soli from tomato plants exhibiting green wilt symtoms In a study focusing on the isolation of bacteria responsible for causing disease in tomato plants expressing symptoms of green wilt, among the eight bacterial strains exhibiting characteristics consistent with those of wilt- inducing bacteria on TZCA, A. soli showed a noticeable reduction in plant height. This study investigated the effect of A.soli, isolated from tomato plants with green wilt symptom, on tomato plants by introducing the bacteria at seed stage, 2-leaf stage and 4-leaf stage.", "mime": "application/pdf"}, {"id": "cet-14809", "words": "4711", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14809", "date": null, "keywords": "catalyst; compounds; conversion; desulfurization; et al; fuel; metal; ods; pom; support", "summary": "Silica and activated carbon also feature highly porous surfaces that are ideal as catalyst support. 2.1 Current ODS Catalysts There are several ODS catalysts currently under study.", "mime": "application/pdf"}, {"id": "cet-1481", "words": "4063", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-1481", "date": null, "keywords": "carbon; challenge; data; ecolife; household; iskandar; malaysia; school; students", "summary": "Palmer N., Neal J., 2003, The handbook of environmental education, Taylor and Francis, Abingdon, United Kingdom Phang F.A., Wong W.Y., Ho C.S., Fujino J., Musa A.N., Safri I.E., Suda M., 2016a, Low carbon awareness among primary school students through Iskandar Malaysia ecolife challenge competition, Man in India, 96(1), 387-395 Phang F.A., Wong W.Y., Ho C.S., Fujino J., Musa A.N., Suda M., 2016b, Iskandar Malaysia Ecolife Challenge: Low carbon education for teachers and students, Clean Technologies and Environmental Policy, DOI: 10.1007/s10098-016-1215-y UTM-Low Carbon Asia Research Centre, 2013, Low Carbon Society Blueprint for Iskandar Malaysia 2025, 2nd ed., UTM-Low Carbon Asia Research Centre, Johor, Malaysia WWF Malaysia, 2016, Eco-Schools Program Malaysia <eco-schools.wwf.org.my/index.cfm?&menuid=45> accessed 11.07.2016 420 Therefore, research to improve the workbooks must be taken to ensure that Ecolife Challenge is not only effective in achieving LCS in a long run but also serves as an assessment tool for policy makers to learn how carbon emission can be reduced in the residential sectors and how school students can play an essential role in this.", "mime": "application/pdf"}, {"id": "cet-14810", "words": "3990", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14810", "date": null, "keywords": "acid; als; catalyst; esterification; extraction; hexane; liquid; product; reaction", "summary": "The acid-base titration demonstrated a minimal percentage difference with GC-MS data for LA conversion and could be suggested as a reliable liquid product analysis, especially for LA esterification reaction. 88 Figure 4: (a) ALs yield and LA conversion from the esterification of LA with methanol, ethanol, and n-butanol to ALs over SLBC catalyst quantified by acid-base titration and GC-MS analysis, (b) Illustration of reaction mechanism of LA esterification to ALs on catalyst surface 3.3 Separation of ALs via solvent extraction Table 1 displays the percentage of extracted ALs as quantified by GC-MS.", "mime": "application/pdf"}, {"id": "cet-14811", "words": "4674", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14811", "date": null, "keywords": "catalyst; chemical; cracking; et al; hydrocarbons; liquid; plastic; products; pyrolysis; waste; wong; yields", "summary": "Plastic pyrolysis powered by induction heating at a laboratory scale has an energy saving of 80 % compared to plastic pyrolysis using an electric furnace (Wong et al., 2023). In addition to the driving above forces, the long-term development of plastic pyrolysis technology is also favourable due to the following concepts: (a) a transition to a green chemical industry, where circular carbon feedstocks (including captured CO2, recycled plastics, and sustainable biomass) and renewable electricity replace the roles of fossil fuels as carbon feedstock and energy source for chemicals production (Gabrielli et al., 2023; Lopez et al., 2023); (b) integration of plastic pyrolysis unit in the existing petroleum refinery system, due to the similarity in compositions of plastic pyrolysis products to crude oil and natural gas (Palos et al., 2021).", "mime": "application/pdf"}, {"id": "cet-14812", "words": "2799", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-14812", "date": null, "keywords": "composition; flow; gasification; rdf; syngas", "summary": "Le Tan et al. (2022) investigated RDF gasification, focusing on syngas composition and energy recovery, but didn't address RDF composition heterogeneity, which significantly impacts gasification performance. Figure 1: Aspen plus flowsheet of the co-gasification RDF and TW model 98 Table 2: Simulation Parameters for co-gasification RDF and TW Block Module Describe and Reaction ref DRYING RStoic Simulates drying by quantifying water removal from RDF and TW based on reaction equations (Eq(2) and Eq(3)).", "mime": "application/pdf"}, {"id": "cet-14813", "words": "3728", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14813", "date": null, "keywords": "aina; chicken; composting; manure; materials; nt2; nt3; nt4; temperature; treatments", "summary": "3.4 Effect of composts on germination index (GI) and growth indicators of mung bean Germination index (GI) and plant growth index parameters were used to indicate the phytotoxicity and effectiveness of compost fertilizers on plants (Nguyen et al., 2020). Table 1: Formulation of compost materials Treatments Materials AINA NT1 30 kg chicken manure \u2013 rice husk 0 % \u2013 Control NT2 30 kg chicken manure \u2013 rice husk 0.5 % NT3 30 kg chicken manure \u2013 rice husk 1.0 % NT4 30 kg chicken manure \u2013 rice husk 1.5 % 2.3 Bacterial density and physical properties analysis The central temperature, pH, electrical conductivity (EC), and moisture indicators were recorded daily during composting.", "mime": "application/pdf"}, {"id": "cet-14814", "words": "3265", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14814", "date": null, "keywords": "accuracy; deficiency; detection; fertilizer; image; nutrient; pechay; robot; system", "summary": "The study's goal is to optimize fertilizer use by applying it only when necessary, thus reducing costs and minimizing the potential risks associated with producing non-deficient Pechay plants. As the robot strolls through the seedbed, it will stop at the designated markers using ferrite magnets that are specifically distanced along with the distancing of Pechay plants.", "mime": "application/pdf"}, {"id": "cet-14815", "words": "4312", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14815", "date": null, "keywords": "flotation; galena; ppm; sieve; size; sphalerite; tailings", "summary": "ISBN 979-12-81206-14-4; ISSN 2283-9216 Selective Flotation of Zinc and Lead from Sphalerite and Galena \u2013 Exploring Ecologically Sustainable and Economical Reagents Steven Kuba Nuhua,*, Hamoud Alenezib aDepartment of Minerals and Petroleum Resources Engineering, School of Engineering, Plateau State Polytechnic, Barkin- Ladi, Nigeria bDepartment of Chemical Engineering, The Public Authority for Applied Education and Training, College of Technological Studies, Kuwait kubsteven3@gmail.com Sodium cyanide (NaCN) and sodium sulphide (Na2S) are frequently employed in selective flotation to depress Lead (Pb) in galena during the froth flotation of sphalerite/galena (ZnS/PbS). Due to the coexistence of the ZnS and PbS, normal froth flotation finds it difficult to separate them, as a result of this, selective flotation may enhance their separation and concentrations (Cheng et al., 2023).", "mime": "application/pdf"}, {"id": "cet-14816", "words": "3138", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14816", "date": null, "keywords": "adsorption; dye; dyes; model; pei; ry2; water", "summary": "The calculation of dye adsorption q (mg/g) on PC and PEI-PC was performed using Eq(1). After RY2 adsorption on PEI-PC, the surface was observed roughly due to the effect of RY2 molecule, and additional elements such as sulfur and chlorine were detected (Figure 2c).", "mime": "application/pdf"}, {"id": "cet-14817", "words": "4268", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14817", "date": null, "keywords": "afternoon; air; co2; consumption; correlation; power; power consumption; zone", "summary": "This paper focuses on identifying the relationship between power consumption with integrated IAQ parameters of CO2 concentration, air temperature, and humidity for Air Conditioning Mechanical and Ventilation (ACMV) system in the office building. The findings establish a linear model showing the relationship between power consumption and indoor air quality (IAQ) parameters.", "mime": "application/pdf"}, {"id": "cet-14818", "words": "3993", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14818", "date": null, "keywords": "accessibility; analysis; density; green; hong; kong; network; park; space; study; urban", "summary": "This study proposes an evaluation method for urban green space accessibility with the aim of improving residents' well-being. Taking Hong Kong Special Administrative Region (SAR), China as an example, the study analyzes the impact of transportation on urban green space accessibility.", "mime": "application/pdf"}, {"id": "cet-14819", "words": "4165", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14819", "date": null, "keywords": "acid; ascorbic; food; potassium; pumpkin; puree; sorbate; storage", "summary": "Table 1: Change of total carotenoids content (mg/100g dry matter) of pumpkin puree during chilled storage Samples Storage intervals (d) 0 3 6 9 12 15 Mean 01-02 15.75 \u00b1 2.08 19.81 \u00b1 4.15 21.44 \u00b1 4.22 21.01 \u00b1 3.64 22.41 \u00b1 3.01 22.14 \u00b1 2.62 20.70 \u00b1 1.70a 0 - 0.025 15.75 \u00b1 2.08 15.98 \u00b1 0.47 16.11 \u00b1 0.91 16.36 \u00b1 1.52 16.16 \u00b1 3.04 15.91 \u00b1 1.52 16.19 \u00b1 0.25cde 0 - 0.05 15.75 \u00b1 2.08 16.76 \u00b1 3.15 18.83 \u00b1 5.91 18.56 \u00b1 6.19 18.72 \u00b1 4.61 19.99 \u00b1 0.62 18.36 \u00b1 1.06b 0 - 0.075 15.75 \u00b1 2.08 15.38 \u00b1 1.67 16.95 \u00b1 5.54 17.13 \u00b1 4.69 17.15 \u00b1 3.84 24.23 \u00b1 8.14 18.17 \u00b1 2.83bc 0.05 - 0 15.75 \u00b1 2.08 22.87 \u00b1 13.06 22.82 \u00b1 4.27 18.76 \u00b1 10.41 22.37 \u00b1 10.91 21.62 \u00b1 10.05 21.23 \u00b1 1.73a 0.05 - 0.025 15.75 \u00b1 2.08 19.71 \u00b1 8.38 17.97 \u00b1 7.43 17.95 \u00b1 7.25 19.01 \u00b1 5.96 19.46 \u00b1 8.10 18.14 \u00b1 1.67bc 0.05 - 0.05 15.75 \u00b1 2.08 18.21 \u00b1 7.99 18.95 \u00b1 6.55 16.72 \u00b1 4.21 19.88 \u00b1 8.25 19.85 \u00b1 8.57 18.04 \u00b1 1.86bc 0.05 - 0.075 15.75 \u00b1 2.08 17.02 \u00b1 7.99 17.99 \u00b1 5.43 16.33 \u00b1 5.22 20.02 \u00b1 9.23 17.64 \u00b1 7.74 17.73 \u00b1 1.14bcd 0.1 - 0 15.75 \u00b1 2.08 16.72 \u00b1 7.70 15.82 \u00b1 4.34 17.29 \u00b1 5.68 16.63 \u00b1 2.52 15.54 \u00b1 5.33 15.89 \u00b1 1.27de 0.1 - 0.025 15.75 \u00b1 2.08 14.48 \u00b1 4.54 12.19 \u00b1 4.49 14.20 \u00b1 5.89 15.33 \u00b1 2.41 18.75 \u00b1 0.05 14.97 \u00b1 1.95e 0.1 - 0.05 15.75 \u00b1 2.08 14.73 \u00b1 4.82 12.56 \u00b1 2.16 16.24 \u00b1 7.52 15.01 \u00b1 1.53 15.48 \u00b1 4.68 14.37 \u00b1 1.48e 0.1 - 0.075 15.75 \u00b1 2.08 14.72 \u00b1 5.32 13.69 \u00b1 2.31 15.64 \u00b1 6.39 14.92 \u00b1 2.46 13.03 \u00b1 0.23 14.21 \u00b1 0.94e Mean 15.75 \u00b1 2.08b 17.19 \u00b1 2.44ab 17.11 \u00b1 3.14ab 17.18 \u00b1 1.68ab 18.13 \u00b1 2.57a 18.63 \u00b1 3.11a Note: The a, b, c,... superscript letter(s) in the same column and row are significantly different (p < 0.05). 3 6 9 12 15 Mean 01-02 2.12 \u00b1 0.86 2.97 \u00b1 1.38 2.31 \u00b1 0.13 2.68 \u00b1 0.25 3.09 \u00b1 0.11 2.64 \u00b1 0.37abcd 0 - 0.025 1.04 \u00b1 0.91 2.29 \u00b1 0.31 1.33 \u00b1 1.79 2.22 \u00b1 1.31 2.08 \u00b1 1.68 1.79 \u00b1 0.51ef 0 - 0.05 1.35 \u00b1 0.01 2.69 \u00b1 0.27 2.83 \u00b1 0.56 2.81 \u00b1 0.19 3.12 \u00b1 0.05 2.56 \u00b1 0.62abcd 0 - 0.075 1.16 \u00b1 0.24 2.70 \u00b1 1.09 2.34 \u00b1 0.13 2.56 \u00b1 0.12 2.94 \u00b1 0.03 2.34 \u00b1 0.62bcde 0.05 - 0 2.98 \u00b1 1.46 2.60 \u00b1 0.99 3.10 \u00b1 1.99 2.93 \u00b1 1.95 2.99 \u00b1 0.98 2.92 \u00b1 0.17ab 0.05 - 0.025 1.30 \u00b1 1.12 2.28 \u00b1 1.33 2.96 \u00b1 3.64 1.86 \u00b1 1.16 1.94 \u00b1 1.14 2.07 \u00b1 0.55def 0.05 - 0.05 2.58 \u00b1 2.11 3.01 \u00b1 1.64 3.35 \u00b1 2.73 3.07 \u00b1 2.07 3.40 \u00b1 2.02 3.08 \u00b1 0.29a 0.05 - 0.075 2.13 \u00b1 1.11 3.20 \u00b1 1.97 3.44 \u00b1 2.17 3.12 \u00b1 1.72 3.66 \u00b1 2.03 3.11 \u00b1 0.53a 0.1 - 0 2.37 \u00b1 0.34 1.72 \u00b1 0.85 1.42 \u00b1 0.43 1.35 \u00b1 1.51 1.43 \u00b1 1.76 1.66 \u00b1 0.38f 0.1 - 0.025 1.92 \u00b1 0.88 2.25 \u00b1 0.69 2.63 \u00b1 0.61 2.86 \u00b1 0.69 3.23 \u00b1 0.06 2.58 \u00b1 0.46abcd 0.1 - 0.05 2.13 \u00b1 0.55 2.60 \u00b1 0.41 2.73 \u00b1 0.41 3.03 \u00b1 0.72 3.26 \u00b1 0.28 2.74 \u00b1 0.40abc 0.1 - 0.075 1.42 \u00b1 0.98 2.11 \u00b1 0.63 2.32 \u00b1 0.52 2.57 \u00b1 0.24 2.67 \u00b1 0.37 2.22 \u00b1 0.45cdef Mean 1.88 \u00b1 0.59b 2.53 \u00b1 0.40a 2.56 \u00b1 0.64a 2.59 \u00b1 0.51a 2.82 \u00b1 0.64a Note: The a, b, c,... superscript letter(s) in the same column and row are significantly different (p < 0.05).", "mime": "application/pdf"}, {"id": "cet-1482", "words": "3061", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-1482", "date": null, "keywords": "calcium; carbonate; co2; flow; gas; min; pcc; terpineol", "summary": "Reference Berger C., Dandeu A., Carteret C., Humbert B., Muhr H., Plasari E., Bossoutrot J.M., 2009, Relations for the determination of the polymorphic composition of calcium carbonate precipitated in saturated sodium chloride solutions, Chemical Engineering Transactions 17, 68 \u2013686 Feng B., Yong A.K., An H., 2007, Effect of various factors on the particle size of calcium carbonate formed in a precipitation process, Material Science and Engineering: A 445-446,170-179 Kirboga S., Oner, M., 2013, Effect of the experimental parameters on calcium carbonate precipitation, Chemical Engineering Transactions 32, 2119-2124 Marthur K., 2001, High speed manufacturing process for precipitated calcium carbonate employing sequential pressure carbonation, US Pat. 6,251,356 Mantilaka M.M.M.G.P.G., Karunaratne D.G.G.P., Rajapakse, R.M.G., Pitawala H.M.T.G.A., 2013, Precipitated calcium carbonate/poly(methyl methacrylate) nanocomposite using dolomite: Synthesis, characterization and properties, Powder Technology 235, 628\u2013632 Mohd Sabri S.N., Othman R., Isa N., Othman A., 2016, New approach of synthesizing mineral product from industrial waste, Key Engineering Materials 694, 195-199 Oner M., Calvert P., 1994, The effect of architecture of acrylic polyelectrolytes on inhibition of oxalate crystallization, Materials Science and Engineering: C 2, 93 \u2013 101 Othman A., Isa N., Othman R., 2015, Preparation of precipitated calcium carbonate using additive and without additive, Jurnal Teknologi 77 (3), 49-53 Sangwal K., 2007, Additives and Crystallization Processes, Wiley, West Sussex, England, 298-299 Teir S., Eloneva S., Zevenhoven R., 2005, Production of precipitated calcium carbonate from calcium silicates and carbon dioxide, Energy Conversion and Management 46, 2954\u20132979 Ukrainczyk M., Kontrec J., Babic-Ivancic V., Brecevic L., Kralj D., 2007. The two experiments without terpineol used sucrose as additive and the flow rate of carbon dioxide gas introduced into the calcium sucrate solutions were 0.2 L/min and 2 L/min.", "mime": "application/pdf"}, {"id": "cet-1483", "words": "4116", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-1483", "date": null, "keywords": "biomass; catalyst; husk; loading; phase; pyrolysis; rice; rice husk; samples; weight", "summary": "In addition, at low catalyst weight loading sample, RH-2 (1:0.05), the mass loss of hemicellulose and cellulose start to decreases to 48.00 % from 48.67 % (RH- 1). 2.3 Pyrolysis experimental procedure TGA was used to investigate the weight loss of catalytic rice husk and the evolution of pyrolysis vapour simultaneously.", "mime": "application/pdf"}, {"id": "cet-1484", "words": "3262", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-1484", "date": null, "keywords": "composting; content; effect; effectiveness; materials; microbial; msw; waste", "summary": "The long-term goal is to establish a decision framework for the application of MI based on different composting materials. A decision framework is required for the effective application of MI for different composting scenarios.", "mime": "application/pdf"}, {"id": "cet-1485", "words": "3651", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-1485", "date": null, "keywords": "aggregate; ash; coal; concrete; leaching; replacement; sand; strength", "summary": "Previous researches have shown that it is possible to produce durable concrete utilising industrial waste materials such as red mug aggregates, silica fume, blast furnace slag, coal fly ash (FA) and coal bottom ash (BA). DOI: 10.3303/CET1756074 Please cite this article as: Rafieizonooz M., Salim M.R., Hussin M.H., Mirza J., Yunus S.M., Khankhaje E., 2017, Workability, compressive strength and leachability of coal ash concrete, Chemical Engineering Transactions, 56, 439-444 DOI:10.3303/CET1756074 439 Several researches have studied the characteristics of concrete containing BA as a fine aggregate replacement (Jang et al., 2016).", "mime": "application/pdf"}, {"id": "cet-1486", "words": "2751", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-1486", "date": null, "keywords": "astm; cement; concrete; content; permeability; pofa; strength; water", "summary": "Furthermore, pervious concrete containing POFA showed higher water permeability and void content but lower compressive and tensile strength than control pervious concrete. However, the obtained compressive and tensile strength were within the acceptable range which is reported for strengths of pervious concrete.", "mime": "application/pdf"}, {"id": "cet-14959", "words": "3316", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14959", "date": null, "keywords": "energy; factor; process; solar; temperature; winter; \ud835\udc47\ud835\udc56\ud835\udc5b; \ud835\udc47\ud835\udc5c\ud835\udc4f\ud835\udc57", "summary": "Different research studies have been conducted on the design of solar thermal networks using PTC technology to define the most suitable design methodology. They compared the performance of these hybrid systems to solar thermal networks consisting of only one of these collector types.", "mime": "application/pdf"}, {"id": "cet-14960", "words": "3238", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14960", "date": null, "keywords": "exchanger; heat; load; promoters; tape", "summary": "Introduction Several approaches are employed in retrofit strategies for heat exchanger networks. This model leverages retrofit methodology concepts to optimise heat exchanger networks.", "mime": "application/pdf"}, {"id": "cet-14961", "words": "2771", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-14961", "date": null, "keywords": "design; exchanger; figure; flow; fluid; heat; outlet; pressure; tubes", "summary": "The performance of finned tube heat exchangers depends on several factors, including the number of staggered tubes, tube length, fin pitch, tube pitch, and fin area. Besides, this method included equations for calculating flow distribution through heat exchanger tubes.", "mime": "application/pdf"}, {"id": "cet-14962", "words": "3301", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14962", "date": null, "keywords": "effect; impact; model; rebound; rebound effect; system", "summary": "Most notably, the emergence of rebound effects presents a significant barrier that may undermine the benefits of circularity. However, this can be opposed by rebound effects.", "mime": "application/pdf"}, {"id": "cet-14963", "words": "2892", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-14963", "date": null, "keywords": "biogas; capture; co2; combustion; cost; energy; hydrogen; membrane; production; reforming", "summary": "The following case studies of green hydrogen production based on biogas catalytic steam reforming were evaluated: - Case 1: Biogas catalytic reforming without CO2 capture (benchmark); - Case 2: Biogas catalytic reforming with pre-combustion CO2 capture with MDEA (benchmark); - Case 3: Biogas catalytic reforming with pre-combustion CO2 capture with membranes; - Case 4: Biogas catalytic reforming with pre- and post-combustion CO2 capture with membranes. Report 2017-2, Cheltenham, UK. Quang D.V., Milani D., Abu Zahra M., 2023, A review of potential routes to zero and negative emission technologies via the integration of renewable energies with CO2 capture processes.", "mime": "application/pdf"}, {"id": "cet-14964", "words": "2964", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14964", "date": null, "keywords": "carbon; demand; emissions; energy; model; oil; optimization; systems; \ud835\udc46\ud835\udc3b\ud835\udc3c\ud835\udc39\ud835\udc47; \ud835\udc48\ud835\udc46\ud835\udc38\ud835\udc45", "summary": "The model is designed to minimize uncertainties in annual operational costs, carbon emissions, and energy demand, providing an advanced optimization framework for the sustainable development of oilfield energy systems. \u2022 Demand response technology is used to adjust energy demand.", "mime": "application/pdf"}, {"id": "cet-14965", "words": "2956", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-14965", "date": null, "keywords": "bed; design; energy; figure; heat; hydrogen; octet; storage; transfer", "summary": "This process is represented by the equation: \ud835\udc3b2 + \ud835\udc40\ud835\udc52\ud835\udc61\ud835\udc4e\ud835\udc59 \u21cc \ud835\udc40\ud835\udc3b + \ud835\udee5\ud835\udc3b\ud835\udc45; \ud835\udee5\ud835\udc3b\ud835\udc45 > 0 (1) 355 Due to its safe operation and high hydrogen density per unit volume, MH technology holds promise for hydrogen storage. Employing a metamaterial of lattice octet design with inner channels for heat transfer fluid flow creates a design that is capable of withstanding load while maintaining MH hydrogen storing performance.", "mime": "application/pdf"}, {"id": "cet-14966", "words": "3278", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-14966", "date": null, "keywords": "bitcoin; capacity; energy; hydrogen; mining; mitigation; potential; power; states", "summary": "The model outputs include: (1) the economic potential that can be generated based on the implementation of the considered technological solutions; (2) the total deployment of renewable infrastructure, which can be attained based on the conventional mitigation framework incorporating bitcoin mining operations and green hydrogen production; (3) The total deployment of carbon capture capacity can be attained based on the negative mitigation framework incorporating bitcoin mining operations and green hydrogen power supply. This approach involves using grid electricity alongside green hydrogen power for crypto mining, directing the economic potential toward improving carbon offsetting capabilities through technologies such as Direct Air Capture (DAC).", "mime": "application/pdf"}, {"id": "cet-14967", "words": "4036", "extension": ".pdf", "flesch": "27", "author": null, "title": "cet-14967", "date": null, "keywords": "carbon; chain; chemical; material; plastic; pollution; processes; production; recycling; value; waste", "summary": "The major types of plastic materials aligned with the U.S. Environmental Protection Agency (USEPA) include polyethylene terephthalate (PET) (high density, low density, and linear low density) polyethylene (HDPE, LDPE, and LLDPE), polypropylene (PP), polystyrene (PS), and polylactic acid (PLA). Technological innovations such as repurposing carbon emissions to plastic materials via biomass conversion should be incentivized to decarbonize the plastic value chain with a 55 % GWP reduction.", "mime": "application/pdf"}, {"id": "cet-14968", "words": "4006", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14968", "date": null, "keywords": "agriculture; cea; cities; consumption; control; energy; food; systems", "summary": "Each of these components plays a crucial role in our study, collectively contributing to a comprehensive understanding of the technological advancements in CEA systems. Being a dependable and sustainable method for producing fresh, local food, CEA reinforces the resilience and self-sufficiency of urban food systems (Ajagekar et al., 2024).", "mime": "application/pdf"}, {"id": "cet-14969", "words": "4399", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-14969", "date": null, "keywords": "application; biochar; change; crop; crop yield; pyrolysis; rule; set; soil; yield", "summary": "Data from previous studies focusing on the effects of biochar application on crop yield can be used to find trends, patterns, and correlations between the different parameters involved by using artificial intelligence. This section discusses how the rules were generated and evaluated to determine the percentage change in crop yield after subjecting the soil to biochar application.", "mime": "application/pdf"}, {"id": "cet-14970", "words": "2960", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14970", "date": null, "keywords": "cost; energy; impact; meoh; methanol; p p; production; total", "summary": "The environmental impact of the system equates to approximately 1.77\u00d7105 t of methanol produced by coal gasification technology, indicating that modular methanol production is more eco-friendly. (30), the limitation between modular production quantity and capacity as shown in Eqs. (31)-(32), and the limitation between methanol production and demand within the cycle as shown in Eq.", "mime": "application/pdf"}, {"id": "cet-14971", "words": "4221", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-14971", "date": null, "keywords": "air; airflow; concentration; exhaust; journal; operating; particle; potential; room; systems; ventilation", "summary": "(Cheng et al., 2023) Vertically downward (Ceiling- mounted) To evaluate the efficiency of operating room ventilation in reducing and eliminating aerosol particles during general endotracheal anaesthesia. Cong W., Sture H., Sasan S., 2018, Numerical study of temperature-controlled airflow in comparison with turbulent mixing and laminar airflow for operating room ventilation, Building and Environment,144, 0360- 1323.", "mime": "application/pdf"}, {"id": "cet-14972", "words": "3671", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14972", "date": null, "keywords": "condensation; heat; hyd; hydrophobic; refrigerant; surface; transfer; tube", "summary": "(a) (b) (c ) Figure 2: Images of enhanced surface tubes (a) HYD, (b) HB/HYD, (c) HB The current experimental study utilized R32 refrigerant to study enhanced heat transfer tubes [smooth tubes (ST), hydrophobic tubes (HYD), herringbone (HB), and hydrophobic-herringbone (HYD-HB) ] in order to investigate the impact of hydrophobicity and evaluate a hydrophobic-enhanced composite structure. Conclusions In order to assess the impact of the hydrophobic structure on tube side condensation heat transfer, an experiment was performed that collected 90 data points over four different scenarios using refrigerant R32.", "mime": "application/pdf"}, {"id": "cet-14973", "words": "3105", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-14973", "date": null, "keywords": "bed; heat; model; parameters; physics; pinns; scale; transfer; transport", "summary": "Comparison between pore scale model and packed-bed scale model of (a) pressure distribution and (b) temperature distribution at uin=0.05 m/s and Tin=700 K Figure 6: Macroscopic transport parameters comparison: effective (a) permeability (b) thermal conductivity 407 4.2 Macroscopic transport parameters at different working conditions Figure 6 compares macroscopic transport parameters at different work conditions (uin=0.05~0.25 m/s and Tin=300~900 K). Macroscopic transport parameters of solid breeding blanket-packed beds in fusion reactors at different inlet velocities (0.05~0.25 m/s) and different inlet temperatures (300~900 K) are obtained.", "mime": "application/pdf"}, {"id": "cet-14974", "words": "3906", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14974", "date": null, "keywords": "assessment; bim; building; carbon; cycle; data; design; energy; information; integration; lca; life; sector", "summary": "However, manual data input for analysing building carbon emissions remains a significant challenge, resulting in time-consuming tasks and potential data gaps. Environmental impacts have become an important factor to consider in building design and construction, often analysed through Life Cycle Assessment (LCA).", "mime": "application/pdf"}, {"id": "cet-14975", "words": "3312", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-14975", "date": null, "keywords": "battery; circuit; current; estimation; method; model; soc; voltage", "summary": "The rapid development of data science and artificial intelligence provides a new solution for battery SOC estimation. Then the effectiveness of the proposed method is further verified under different test conditions, demonstrating the significance to introduce mechanism information in battery SOC estimation.", "mime": "application/pdf"}, {"id": "cet-14976", "words": "4266", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14976", "date": null, "keywords": "chemical; detection; et al; food; hexanal; indicators; methods; quality; rancidity; rice; sensors; storage", "summary": "Recent developments in rice sensors have yet to be reported in the literature. The heat and moisture generated can contribute to mycotoxin development, mold growth, and fungal and bacterial contamination, which are causes of rice rancidity (Muller et 421 al., 2022).", "mime": "application/pdf"}, {"id": "cet-14977", "words": "3676", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-14977", "date": null, "keywords": "electrocoagulation; energy; leachate; metals; min; rate; removal; time", "summary": "This increase in the removal rate as the set-up runs is also observable in Mn heavy metal given in Figure 3b. It possesses high toxicity levels of heavy metals that can cause severe danger and threat to human health.", "mime": "application/pdf"}, {"id": "cet-14978", "words": "3787", "extension": ".pdf", "flesch": "22", "author": null, "title": "cet-14978", "date": null, "keywords": "barriers; development; education; influence; lack; leadership; support; university", "summary": "However, despite the critical role of transformational leadership in this context, teachers face various challenges in motivating and intellectually stimulating their students. The findings underscore the critical importance of anticipating the prominent and influential barrier, which is providing support and involving university administration in implementing transformational leadership.", "mime": "application/pdf"}, {"id": "cet-14979", "words": "2151", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14979", "date": null, "keywords": "efficiency; energy; fluid; heat; orc; temperature; waste", "summary": "Innovative strategies for harnessing waste heat for power generation within refinery operations are explored in this work. The refining process inherently generates large quantities of waste heat, particularly at low temperatures, which are traditionally discarded.", "mime": "application/pdf"}, {"id": "cet-14980", "words": "3301", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-14980", "date": null, "keywords": "biomass; biorefinery; co2; emissions; mills; oil; palm; products; storage", "summary": "Palm oil mills process the fresh fruit bunches (FFBs) to produce crude palm oil (CPO) as the primary product. As of 2021, about 35 % of palm oil mills have installed biogas facilities (Bernama, 2022).", "mime": "application/pdf"}, {"id": "cet-14981", "words": "3833", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14981", "date": null, "keywords": "beijing; china; composting; emissions; ghg; incineration; management; msw; removal; treatment; waste; \ud835\udc3c\ud835\udc5b\ud835\udc50\ud835\udc56\ud835\udc5b\ud835\udc52\ud835\udc5f\ud835\udc4e\ud835\udc61\ud835\udc56\ud835\udc5c\ud835\udc5b; \ud835\udc3f\ud835\udc4e\ud835\udc5b\ud835\udc51\ud835\udc53\ud835\udc56\ud835\udc59\ud835\udc59", "summary": "Scenarios 3 and 4 increase the proportion of incineration, aligning with Chinese policy directives, with waste incineration and composting ratios set at 65:35 and 80:20, respectively. Various MSW treatment scenarios are assessed by alternating the configuration of sanitary landfills, incineration, and composting.", "mime": "application/pdf"}, {"id": "cet-14982", "words": "3585", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14982", "date": null, "keywords": "characteristics; coal; energy; load; model; process; rate; unit", "summary": "b) Dynamic characteristics of coal supply during the load-up process in 830-1,000 MW range Effect of load intervals on energy consumption during load-up process The total coal supply and average coal consumption rate during the load-up process at different intervals are depicted in Figure 6. In contrast, within the range of 830-1,000 MW, the variation in coal supply rate follows a slow and steady increase along with the load.", "mime": "application/pdf"}, {"id": "cet-14983", "words": "3921", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14983", "date": null, "keywords": "chloride; concrete; corrosion; fiber; penetration; scc; test; twsf; water", "summary": "The findings indicate that increased TWSF content leads to higher chloride penetration. However, the presence of fiber still produces 11 out of 16 mixtures with moderate chloride penetration, where the TW3 mix attains a maximum decrease of 46.98 % against plain SCC, which attains high chloride penetration.", "mime": "application/pdf"}, {"id": "cet-14984", "words": "3613", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14984", "date": null, "keywords": "adsorption; catalyst; ceo2(111; decomposition; energy; hydrogen; nh3; pristine; sac; surface", "summary": "Figure 4: The stable adsorption site of the adsorbates on the CeO2(111), Ru(111) and Ru SAC surfaces; Teal blue, white, red, cream white balls, and blue represent Ru, H, O, Ce, and N atoms. Furthermore, it is observed 472 that N binds more strongly to the face of the respective catalysts than all other adsorbates, with adsorption energies of -4.72 eV, -5.87 eV, and -4.65 eV on the CeO2(111), pristine Ru, and Ru SAC surfaces.", "mime": "application/pdf"}, {"id": "cet-14985", "words": "4283", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14985", "date": null, "keywords": "administrators; graph; management; process; resource; scenario; stage; students; sustainability", "summary": "Balassa Eisinger B., Buics L., 2024, The potential of the P-graph for optimizing public service processes. This method not only enhances process efficiency and resource allocation but also aligns with sustainability objectives, marking a significant stride in sustainable public service practices.", "mime": "application/pdf"}, {"id": "cet-14986", "words": "4376", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-14986", "date": null, "keywords": "administration; administrators; documentation; enrollment; graph; management; process; public; sustainability; time; university", "summary": "Using the co-production method to investigate the relationship between sustainability and decision-making in public administration processes, Wyborn et al. (2019) present a new approach to sustainability studies. The goal of this research is to introduce the P-Graph methodology as a new analytical process in the field of public administration processes as a novelty, showing how this application can be utilized to gain deeper understanding and quantifiable results in comparison to other process analysis methods, leading to more detailed improvement suggestions.", "mime": "application/pdf"}, {"id": "cet-14987", "words": "3382", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14987", "date": null, "keywords": "co2; conversion; energy; liquid; methanol; phase; process; production; reaction; solvent; synthesis", "summary": "Ghosh S., Seethamraju S., 2021, Process intensification with a polar solvent in liquid phase methanol synthesis. CO2 conversion rate of 98.27 % and final methanol production of 100.15 kt/y. 1 POWER POWER 2 3 H2 CO2 TEGDME 4 5 6 7 8 9 10 POWE R Reactor Mcomp1 Mcomp2 Comp Mix1 Mix2 Mix3 Valve Flash 1 Flash 2 Pump HE1 HE2 HE3 HE4 HE5 DIST1 DIST2 MeOH H2O MC MS GS MD Figure 4: Liquid-phase synthesis of methanol cycle process flow (Process 2)", "mime": "application/pdf"}, {"id": "cet-14988", "words": "4026", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-14988", "date": null, "keywords": "carbide; carbon; coal; ctbdo; emissions; energy; gas; hydrogen; process; production; reconfiguration; unit", "summary": "The proposed modified CtBDO process is referred to as the AWE-CtBDO process, which includes the AWE process, PCGwGH-CtM process, GSM process, FS process, AS process, EF process, and BDO process. This paper proposes a process reconfiguration for producing 1,4-butanediol by integrating the AWE hydrogen production process, coal-to- methanol process coupled with green hydrogen, and calcium carbide production process using coal-coke- electricity grading substitution method.", "mime": "application/pdf"}, {"id": "cet-14989", "words": "3928", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14989", "date": null, "keywords": "business; case; chatgpt; cost; doi; models; process; study; sustainability", "summary": "de Oca I.M.M., Snoeck M., Reijers H.A., Rodr\u00edguez-Morffi A. 2015, A systematic literature review of studies on business process modeling quality. It potentially relates to SDG 9 (Industry, Innovation, and Infrastructure), as the use of AI tools can support industrial innovation by introducing new methods into work processes.", "mime": "application/pdf"}, {"id": "cet-14990", "words": "3666", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-14990", "date": null, "keywords": "beads; degradation; dye; enzyme; laccase; pvpp; removal; water", "summary": "The percentage removal of BB dye over time is represented in Figure 4a and the column could remove up to 72 % and 86 % for Zn-CS-PVPP and Lac-Zn-CS-PVPP beads respectively after 30 days. Degradation of BB over time in a packed bed column b) Pressure drop along packed bed column length Figure 4: a) Time dependent removal of BB dye from water and b) pressure drop along a packed bed column Acknowledgements This study was funded by National Research Foundation (NRF) of South Africa", "mime": "application/pdf"}, {"id": "cet-14991", "words": "2968", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-14991", "date": null, "keywords": "adsorbent; adsorption; kinetic; mass; model; particle; transfer", "summary": "At set conditions \u2013 same initial Pb(II) concentration, temperature, adsorbent dosage, and adsorbate solution pH \u2013 adsorption kinetics were notably faster for 1 mm adsorbate particles compared to 3 mm particles, requiring only half the time to reach equilibrium. Varied adsorbent particle sizes were tested to demonstrate the greater resistance to mass transfer presented by an increase in adsorbent particle size.", "mime": "application/pdf"}, {"id": "cet-14992", "words": "3857", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-14992", "date": null, "keywords": "ban; china; countries; export; plastic; trade; waste", "summary": "The results show that, after China\u2019s waste import ban, total exports of plastic waste fell by around 56 %, with Southeast Asia (44 %) and Turkey (31 %) emerging as new destinations for plastic waste exports. In addition, INTERPOL has discovered various cases of illegal practices regarding plastic waste exports.", "mime": "application/pdf"}, {"id": "cet-14993", "words": "4161", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14993", "date": null, "keywords": "chemical; co2; column; desorption; distillation; energy; hydrogenation; mea; meoh; process; reaction", "summary": "Despite the potential energy savings of the intensification process, research on CO2 absorption energy problems is focused on finding new solvents with better CO2 capture capabilities and lower energy needs (Soo et al., 524 2024). Nevertheless, the first simulation presented in this study indicates that a desorption-reaction column may be feasible, providing an alternative path for investigation into how to enhance the CO2 hydrogenation to MeOH process.", "mime": "application/pdf"}, {"id": "cet-14994", "words": "3477", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-14994", "date": null, "keywords": "ann; crystallisation; oil; olein; palm; process", "summary": "The management of product quality in palm oil crystallisation poses a formidable challenge. Figure 2: Theory of palm oil crystallisation 2.2 Artificial neural network An artificial neural network utilizes the brain\u2019s nervous system to undergo data processing.", "mime": "application/pdf"}, {"id": "cet-14995", "words": "3925", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-14995", "date": null, "keywords": "activation; adsorption; area; biochar; chemical; et al; groups; modification; surface", "summary": "HCl, H2SO4 and H3PO4 activated biochar possess high surface area and porosity, except HNO3 activated biochar. Rostamian R., Heidarpour M., Mousavi S., Afyuni M., 2018, Characterization and Sodium Sorption Capacity of Biochar and Activated Carbon Prepared from Rice Husk. Rostamian R., Heidarpour, M., Mousavi, S.F., Afyuni, M., 2015, Characterization and sodium sorption capacity of biochar and activated carbon prepared from rice husk.", "mime": "application/pdf"}, {"id": "cet-14996", "words": "3547", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-14996", "date": null, "keywords": "cost; electricity; energy; form; hydrogen; industrial; production; transportation; zone", "summary": "PCCpi is the capital cost of hydrogen plant p producing hydrogen form i, SCCsi is the capital cost of storage unit s for hydrogen form i, ECCei is the capital cost of electrolysis plant e producing hydrogen form i, PVCC is the PV system's capital cost, FCCC is the fuel cell's capital cost, INVCC is the inverter's capital cost. \ud835\udc43\ud835\udc36\ud835\udc4e\ud835\udc5d\ud835\udc5d\ud835\udc56 \ud835\udc5a\ud835\udc56\ud835\udc5b\ud835\udc41\ud835\udc43\ud835\udc5d\ud835\udc56\ud835\udc54 \u2264 \ud835\udc43\ud835\udc45\ud835\udc5d\ud835\udc56\ud835\udc54 \u2264 \ud835\udc43\ud835\udc36\ud835\udc4e\ud835\udc5d\ud835\udc5d\ud835\udc56 \ud835\udc5a\ud835\udc4e\ud835\udc65\ud835\udc41\ud835\udc43\ud835\udc5d\ud835\udc56\ud835\udc54 \u2200 \ud835\udc56, \ud835\udc54 (3) where NPpig is the number of hydrogen plant p producing hydrogen form i in industrial zone g, \ud835\udc43\ud835\udc36\ud835\udc4e\ud835\udc5d\ud835\udc5d\ud835\udc56 \ud835\udc5a\ud835\udc56\ud835\udc5b is the minimum capacity of hydrogen plant p producing hydrogen form i, while \ud835\udc43\ud835\udc36\ud835\udc4e\ud835\udc5d\ud835\udc5d\ud835\udc56 \ud835\udc5a\ud835\udc4e\ud835\udc65 is the maximum capacity of hydrogen plant p producing", "mime": "application/pdf"}, {"id": "cet-14997", "words": "3309", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-14997", "date": null, "keywords": "basalt; carbon; cdr; co2; emissions; input; model; output; sector; weathering", "summary": "The resulting model is used to determine changes in sector total outputs at fixed GDP for 5\u201320 % reduction in CO2 emissions. Sector S1 S2 S3 S4 S5 S6 S7 S8 Agriculture (S1) 0.288 0.004 0.122 0.002 0.001 0.003 0.000 0.002 Mining (S2) 0.000 0.098 0.035 0.028 0.010 0.000 0.000 0.000 Manufacturing (S3) 0.162 0.134 0.323 0.189 0.394 0.034 0.243 0.067 Electricity (S4) 0.007 0.017 0.023 0.043 0.014 0.015 0.017 0.016 Construction (S5) 0.000 0.001 0.000 0.000 0.000 0.001 0.001 0.002 Trade (S6) 0.011 0.022 0.099 0.041 0.059 0.135 0.029 0.050 Transportation (S7) 0.005 0.014 0.018 0.003 0.006 0.025 0.158 0.010 Other services (S8) 0.018 0.044 0.060 0.073 0.059 0.093 0.151 0.250 Table 2: Baseline sectoral total outputs and final demands (adapted from Philippine Statistics Authority, 2024) Sector Total output (billion PHP/y) Final demand (billion PHP/y) Agriculture (S1) 3,461 1,090 Mining (S2) 245 \u2212223 Manufacturing (S3) 10,939 4,094 Electricity (S4) 897 260 Construction (S5) 3,008 2,969 Trade (S6) 4,668 2,066 Transportation (S7) 1,737 990 Other services (S8) 11,584 7,019 Table 3: Direct sectoral CO2 intensities (adapted from Philippine Department of Energy 2024)", "mime": "application/pdf"}, {"id": "cet-14998", "words": "4343", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-14998", "date": null, "keywords": "carbon; china; development; energy; esgo; hydrogen; national; production; projects; roadmap; targets", "summary": "Beyond its role in decarbonization, hydrogen energy is gaining traction as a means to enhance energy independence and security in various countries. Establishing a regulatory framework for hydrogen energy, including targets, standards, incentives, and carbon pricing, is strongly recommended.", "mime": "application/pdf"}, {"id": "cet-14999", "words": "3831", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-14999", "date": null, "keywords": "co2; compression; energy; heat; process; src; stage; stream", "summary": "In conventional CO2 compression processes, the temperature increase after each compression stage 560 is addressed with a cooling stage. Kurtulus et al. (2018) examined the implementation of an organic Rankine cycle (ORC) for heat recuperation from CO2 compression stages.", "mime": "application/pdf"}, {"id": "cet-15000", "words": "4005", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-15000", "date": null, "keywords": "biomass; carbon; emission; graph; oil; palm; tr u; u c", "summary": "Kong S.-H., Loh S.-K., Bachmann R.T., Rahim S.A., Salimon J., 2014, Biochar from oil palm biomass: By utilising P-graph, the study ascertains feasible technologies and end-products for palm biomass processing, evaluating different pathways' feasibility and their corresponding economic and environmental impacts.", "mime": "application/pdf"}, {"id": "cet-15001", "words": "3596", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15001", "date": null, "keywords": "ball; collisions; energy; impact; mill; planetary; power; shear", "summary": "Most effective power is dissipated in ball impacts against the wall ranging from 2.9\u00b710-5 to 3.5\u00b710-5 J and in shearing between the balls and the walls at collisions ranging from 7.0\u00b710-5 J to 8.5\u00b710-5 J. While angular speed clearly has a direct effect on the amount of energy that goes into the system, it is not so clear for different ball sizes, as simulations are set up to have similar total masses. This study focuses on the numerical characterization of planetary ball mills in terms of different parameters such as angular velocity, number of balls, and ball size.", "mime": "application/pdf"}, {"id": "cet-15002", "words": "3092", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15002", "date": null, "keywords": "bed; distribution; flow; holdup; liquid; packing; particles; reactor", "summary": "Suneja A., Roy S., 2023, Liquid flow distribution in trickle bed reactors containing trilobed extrusions packed using different techniques. Schwidder S., Schnitzlein K., 2012, A new model for the design and analysis of trickle bed reactors.", "mime": "application/pdf"}, {"id": "cet-15003", "words": "2691", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-15003", "date": null, "keywords": "c16; catalyst; conditions; fts; jet; selectivity", "summary": "This ML framework provides a powerful tool for the rational design of FTS catalysts and operating windows to maximize jet fuel productivity. The pie chart illustrated in Figure 6 reveals that catalyst preparation conditions (type of active metal, promoter, promoter loading) were identified as the least significant features influencing the catalytic activity compared to catalyst characterization and FTS operational conditions.", "mime": "application/pdf"}, {"id": "cet-15004", "words": "4168", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15004", "date": null, "keywords": "capture; ccus; co2; industrial; network; sequestration; utilisation; \ud835\udc41 variables; \ud835\udc41 \ud835\udc56=1", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Min Zeng, Yee Van Fan, Xuechao Wang Copyright \u00a9 2024, AIDIC Servizi S.r.l. ISBN 979-12-81206-12-0; ISSN 2283-9216 Optimal Design of CO2 Capture, Utilisation, Mineralisation, and Sequestration Networks within Industrial Clusters Thomas Prousalisa, Athanasios I. Papadopoulosb, Panos Seferlisa,* aDepartment of Mechanical Engineering, Aristotle University of Thessaloniki, Thessaloniki 54124, Greece bChemical Process and Energy Resources Institute, Centre for Research and Technology Hellas, Thermi Thessaloniki 57001, Greece seferlis@auth.gr Holistic development of CO2 capture, utilisation, and storage (CCUS) networks is crucial for the cost- effectiveness and the widespread deployment of such technologies in the industry. CO2 capture, utilisation, and sequestration (CCUS) are promising technologies to mitigate anthropogenic GHGs, as they can achieve high capture efficiencies and be integrated into existing industrial plants.", "mime": "application/pdf"}, {"id": "cet-15005", "words": "3222", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15005", "date": null, "keywords": "aromatics; cracking; diesel; gasoline; lco; light; oil; process; products; technology", "summary": "The mass fraction of aromatics in LCO is generally between 75-90 % (Laredoet al., 2018), and the typical distribution of LCO aromatics is shown in Figure 1. Figure 1: The typical mass fraction distribution of LCO aromatic hydrocarbons With the proposal of the \u201cCarbon Peak and Carbon Neutrality\u201d goals, China\u2019s energy structure is facing significant adjustment, and the proportion of renewable energy is constantly increasing.", "mime": "application/pdf"}, {"id": "cet-15006", "words": "3565", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15006", "date": null, "keywords": "co2; cost; demand; devices; material; pmma; product; study; supplier; unit", "summary": "Model formulation Two optimization models were developed using the following assumptions: (1) a unit of each final product requires a certain number of raw material j, (2) the amount of the final product is known, (3) the differences in 602 the production process and efficiency of each supplier i lead to differences in production cost and CO2 emission per raw material, and finally (4) this study considers a manufacturing plant that acquires raw materials locally. Each demand for raw material (j) from source (i) has a corresponding CO2 emission (eij), purchase cost (cij), and topological connectivity value (bij), which is a binary variable that ensures that there is a connection between supplier i and the demand for raw material j. Figure 1: System in consideration", "mime": "application/pdf"}, {"id": "cet-15007", "words": "3671", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15007", "date": null, "keywords": "co2; cold; energy; gas; hydrogen; lng; process; system; water", "summary": "3. Results An innovative integrated system that maximizes efficiency and reduces energy waste in a variety of industrial operations by utilizing LNG cold energy is shown in Figure 1. The suggested process for producing water and hydrogen utilizing steam methane reforming and proton exchange membrane makes use of LNG cold energy, with each subprocess exhibiting its own benefits.", "mime": "application/pdf"}, {"id": "cet-15008", "words": "4013", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15008", "date": null, "keywords": "butene; butylene; butylene oxide; chinese; chlorohydrin; chp; market; oxide; process; production; reaction", "summary": "Although there are some reports focusing on BO catalysts, the focus on BO production process has been rarely explored. Since aldehydes cause odor and affect health, water affects the hydroxyl value and foaming properties of polymers, isomers act as the envelope for long chains of polymerization, BO products have strict requirements for the content of aldehydes, water and isomers.", "mime": "application/pdf"}, {"id": "cet-15009", "words": "3545", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15009", "date": null, "keywords": "biogas; microalgae; model; \ud835\udc362\ud835\udc3b4\ud835\udc422; \ud835\udc363\ud835\udc3b6\ud835\udc422; \ud835\udc364\ud835\udc3b8\ud835\udc422; \ud835\udc36\ud835\udc422; \ud835\udc3b2\ud835\udc42; \ud835\udc41\ud835\udc3b3", "summary": "In order to compute the amount of produced biogas and, consequently, the rate of the reactions, these components pass through multiple VFA calculator blocks, including the valeric acid block and the propionic acid block, followed by the methanogenesis block. It contributes also significantly to the advancement of sustainable biogas production technologies and lays the groundwork for evaluating the economic feasibility of this process.", "mime": "application/pdf"}, {"id": "cet-15010", "words": "3105", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15010", "date": null, "keywords": "building; carbon; consumption; design; emissions; energy; optimization; strategies; strategy", "summary": "Based on the segmented optimization and co-optimization methods under the whole life cycle perspective, the optimal solution proposed in this study can achieve a 14.4 % reduction in energy consumption, a 10.5 % reduction in carbon emission, and a 4.6 % increase in the useful daylight illuminance. Introduction The impetus of the national dual carbon goal targets positions the building industry, one of the three primary sectors for carbon emissions in China, at a pivotal transition from energy-saving buildings to low-carbon buildings.", "mime": "application/pdf"}, {"id": "cet-15011", "words": "3977", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15011", "date": null, "keywords": "design; ejector; entrainment; flow; function; method; model; objective; optimisation; pressure; shape; turbulence", "summary": "The highly dissipative nature of energy exchanges in ejector flows and their poor adaptability to changing operating conditions is attempted to be mitigated with innovative shapes. Unconventional topologies containing multiple inlets or intakes as well as unsteady flow ejectors today make up an active area of research (Han et.", "mime": "application/pdf"}, {"id": "cet-15012", "words": "3654", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15012", "date": null, "keywords": "advanced; biodiesel; biodiesel production; cavitation; energy; intensification; oil; production; rotor; stator", "summary": "The intense mixing and shear forces from rotor stator HC promote rapid transesterification, resulting in high biodiesel yields. The review assesses the differences between hydrodynamic cavitation and advanced hydrodynamic cavitation techniques in biodiesel production.", "mime": "application/pdf"}, {"id": "cet-15013", "words": "3248", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15013", "date": null, "keywords": "cargo; chemical; engineering; environmental; goods; health; management; materials; monitoring; response; safety; transportation", "summary": "Environmental risks i.e. soil and water contamination from spills, emphasize the need for rigorous safety and clean-up measures, highlighting the balance between their utility and the imperative for safety and environmental protection (K\u00e1tai-Urb\u00e1n et al., 2023). Environmental risks Hazardous substances like heavy metals and pesticides alter soil properties, reducing fertility, harming plant growth and aquatic ecosystems.", "mime": "application/pdf"}, {"id": "cet-15014", "words": "3805", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15014", "date": null, "keywords": "capacity; criteria; criterion; efficiency; future; modelling; operation; pandemic; port; resilience; seaport; sub", "summary": "Table 1: Descriptions for each criterion No Criterion Description 1 Port digitalization Port digitalization involves the transformation of port operations into digital processes. Seaport digitalization can facilitate port operations.", "mime": "application/pdf"}, {"id": "cet-15015", "words": "2724", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15015", "date": null, "keywords": "concentration; contaminant; flow; industrial; model; unit; wastewater; water; \ud835\udc39\ud835\udc56\ud835\udc5b", "summary": "655 The current work aims to cover the gap considering the dynamic and iterative nature of industrial water use, unlike traditional static models with one-time solutions. The iterative framework of the developed model facilitates multiple optimization iterations, effectively mitigating a significant challenge inherent in water integration: the fixed characteristics of processed water flows.", "mime": "application/pdf"}, {"id": "cet-15016", "words": "3526", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15016", "date": null, "keywords": "awareness; cost; electric; green; knowledge; malaysia; perception; public; research; thailand; transportation; vehicles", "summary": "Convenience sampling and regression analysis revealed a significant relationship between knowledge of green transportation, awareness of green transportation, green transportation costs and green transportation perception. The mean score for green transportation perception was 3.83 (on a scale of 1 to 5), indicating a moderate level of perception.", "mime": "application/pdf"}, {"id": "cet-15017", "words": "3316", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15017", "date": null, "keywords": "building; energy; heating; investment; measures; period; retrofit; system; time", "summary": "The integrated approach, combining the selection of optimal building energy system renovation strategy and its investment in time using data-driven modelling, was proposed by Pedone et al. (2023). Introduction The International Energy Agency's report (IEA, 2022) states that the world is currently in a crucial period for the development of energy systems, which should be more safe, sustainable and cost-effective.", "mime": "application/pdf"}, {"id": "cet-15018", "words": "3656", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15018", "date": null, "keywords": "baker; emissions; energy; esps; ghg; hughes; inventory; lca; manufacturing; materials; use", "summary": "Currently, GHG emission inventory calculations take into account not only a single activity or project but the entire Life Cycle Assessment (LCA) of the Product or Service. However, there are few studies on the quantification of GHG emissions and their inventories throughout the Life Cycle Assessment (LCA).", "mime": "application/pdf"}, {"id": "cet-15019", "words": "3227", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15019", "date": null, "keywords": "accuracy; calibration; data; gauge; iot; philippines; prototype; rain; rainfall; technology; water", "summary": "The current state of rain gauge technology is a blend of traditional methods and modern advancements. Rainfall monitoring, conducted with a network of rain gauges deployed across a region, can show how rainfall varies in different places, changes over time, and relates to other types of weather (Veloria et al., 2021).", "mime": "application/pdf"}, {"id": "cet-15020", "words": "3837", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15020", "date": null, "keywords": "mycelium; operating; permeate; pharmaceutical; pressure; temperature; treatment; waste", "summary": "References Adeoye J.B., Tan Y.H., Lau S.Y., Tan Y.Y., Chiong T., Mubarak N.M., Khalid M., 2024, Advanced oxidation and biological integrated processes for pharmaceutical wastewater treatment: A review. Gupta S., Singh A., Sharma T., Kaur R., Khandelwal V., Rawat K.D., Pathak S., Sharma M.K., Singh J., Shah M.P., Chauhan S.C., Parashar D., Shankar P., Kashyap V.K., 2022, Chapter 2 - Applications of ultrafiltration, nanofiltration, and reverse osmosis in pharmaceutical wastewater treatment.", "mime": "application/pdf"}, {"id": "cet-15021", "words": "3979", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-15021", "date": null, "keywords": "approach; contaminants; integration; oil; refineries; refinery; review; wastewater; water; water integration", "summary": "Accepted: 12 November 2024 Please cite this article as: Radelyuk I., Snopkov D., Tan R.R., Zhapargazinova K., 2024, History of water integration in the oil refining industry \u2013 a systematic review, Chemical Engineering Transactions, 114, 691-696 DOI:10.3303/CET24114116 CHEMICAL ENGINEERING TRANSACTIONS VOL. 114, 2024 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Petar S. Varbanov, Min Zeng, Yee Van Fan, Xuechao Wang Copyright \u00a9 2024, AIDIC Servizi S.r.l. This paper presents a systematic review dedicated to the application of water integration in oil refineries.", "mime": "application/pdf"}, {"id": "cet-15022", "words": "3517", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15022", "date": null, "keywords": "energy; hub; industrial; integration; optimization; plants; scenario; steam; utility", "summary": "At steady steam demand, scenario 1 (no integration between the integrated steam hub facility and other steam utility plants), while scenario 2 (the integration with multiple steam utility plants), and scenario 3 (the integration of multiple steam utility plants and a renewable energy-based utility plant). This study focuses on modeling and optimizing the integration of existing steam utility plants into an integrated steam hub facility through Linear Programming (LP) approach.", "mime": "application/pdf"}, {"id": "cet-15023", "words": "3909", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15023", "date": null, "keywords": "gy\u0151r; infrastructure; micromobility; mobility; scooters; traffic; transport; vehicles", "summary": "3.4 Transport habits of electric scooter users and their transport infrastructure development needs Between September and November 2022, a survey of Gy\u0151r's population evaluated traffic habits, public acceptance of electric scooters, and user needs (Szakonyi and Baksa, 2023). Figure 3: Public opinions on the traffic safety of the transport infrastructure regarding the use of electric scooters and other micro-mobility vehicles 3.5 Transport habits of shared electric scooter users and their transport infrastructure development needs After Budapest, in February 2023, the TIER community e-roller sharing system was also launched in Gy\u0151r, with 200 rental stations and 500 units, each with a maximum speed of 25 km/h. speed scooter, the purpose of which was to provide an environmentally friendly and emission-free micromobility service covering the entire city.", "mime": "application/pdf"}, {"id": "cet-15024", "words": "4029", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15024", "date": null, "keywords": "asbestos; asbestos cement; average; cement; chrysotile; detection; doi; environmental; samples; value", "summary": "The paper suggests that environmental conditions and ageing play a significant role in the release and detectability of chrysotile asbestos from asbestos cement products. Chrysotile asbestos consists of a fibrous Mg3(Si2O5)(OH)4 arranged in a 1:1 ratio, with interconnected silica tetrahedra attached to a brucite-like trioctahedral sheet.", "mime": "application/pdf"}, {"id": "cet-15025", "words": "4159", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15025", "date": null, "keywords": "clover; cm-1; color; doi; group; pressure; red; red clover; resistance; seed; spectroscopy; spectrum", "summary": "The study involves using Fourier transform infrared (FT-IR) spectroscopic analysis on red clover seeds under varying pressure levels, specific tensions, and selected quality parameters. The coloration of red clover seeds is primarily determined by genetic factors, although environmental influences are still being debated.", "mime": "application/pdf"}, {"id": "cet-15026", "words": "3723", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15026", "date": null, "keywords": "animal; businesses; capacity; decision; doi; expansion; family; food; industry; meat; products; research", "summary": "Capacity expansion decisions in family-owned food businesses are influenced by various internal and external factors, including market demand, financial resources, and organisational capabilities (Rachmawati et al., 2023). After that, they discussed the importance of internal factors that influence the decision in the case of capacity expansion decisions related to the management of animal by-products in family businesses.", "mime": "application/pdf"}, {"id": "cet-15027", "words": "3932", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15027", "date": null, "keywords": "doi; environmental; food; impact; industry; manufacturers; market; materials; pet; production; research; sustainability; waste", "summary": "While there is insight into pet food production and trends such as insect- based pet food (Acuff et al., 2021), there is a gap in the sustainability initiatives of pet food manufacturers. In recent years, many of the 150 pet food companies currently producing pet food in Europe have started to focus on the ethical and local sourcing of raw materials, but there is still a lack of optimisation of the production processes and sustainable sourcing of raw materials.", "mime": "application/pdf"}, {"id": "cet-15028", "words": "4317", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15028", "date": null, "keywords": "electricity; emissions; energy; hungary; input; output; production; table; use; value", "summary": "Simulations performed with the model show that the ongoing 120 % expansion of nuclear capacity can result in a 55.2 %, 35.1 %, and 30.1 % increase in electricity production, value-added, and greenhouse gas emissions if the structure of final demand and technology are not changed. The classification of power plants into the most characteristic subsector of electricity production was performed using the tables of HEPURA-licensed electricity producers.", "mime": "application/pdf"}, {"id": "cet-15029", "words": "3964", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15029", "date": null, "keywords": "awareness; doi; food; food waste; hungarian; initiatives; ngos; reduction; research; study; waste", "summary": "On the other hand, conscious people who demonstrate a strong commitment to reducing household food waste and actively participate in efforts to promote recycling and sustainability make a meaningful impact on reducing food waste in their communities. The issue of food waste is a significant global challenge that is closely linked to the United Nations Sustainable Development Goals (SDGs).", "mime": "application/pdf"}, {"id": "cet-15030", "words": "4435", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15030", "date": null, "keywords": "conformation; correlations; cows; dairy; holstein; milk; production; rear; rg=; traits; type; udder", "summary": "Xue X., Hu H., Zhang J., Ma Y., Han L., Hao F., Jiang Y., Ma Y., 2022, Estimation of genetic parameters for conformation traits and milk production traits in Chinese Holsteins. The heritability estimates for conformation traits are moderate, ranging from 0.20 \u00b1 0.047 to 0.38 \u00b1 0.04.", "mime": "application/pdf"}, {"id": "cet-15031", "words": "3479", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15031", "date": null, "keywords": "control; controller; function; matrix; pid; response; system", "summary": "The aim of the authors is to examine and demonstrate that LQ control can achieve a more precise and faster step response in controlling the BLDC motors of quadcopters compared to the use of PID controllers. The study of Ahmed et al. (2015) and Say et al. (2021) focused on the application of PID controllers, and it was not extended to the examination of the system with other types of control.", "mime": "application/pdf"}, {"id": "cet-15032", "words": "3359", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15032", "date": null, "keywords": "air; category; health; limit; printing; quality; sampling; system; technology; workplace", "summary": "Before conducting air measurements in the workplace, the 3D printing laboratory staff explained the types and locations of the equipment and the properties of the materials used for 3D printing. In our study, the emissions of air pollutants into the environment were measured by emission measurements and the impact area was determined by calculation.", "mime": "application/pdf"}, {"id": "cet-15033", "words": "4273", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15033", "date": null, "keywords": "analysis; design; doi; methods; noise; reduction; simulation; vehicle; vibration; vibroacoustic", "summary": "Besides, the energy efficiency and performance of the vehicles can be improved by vibroacoustic simulations. Our research highlights the importance of vibroacoustic simulation and opens new directions in the field of noise reduction, promoting the spread of sustainable transport solutions.", "mime": "application/pdf"}, {"id": "cet-15034", "words": "3380", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15034", "date": null, "keywords": "plant; rapeseed; treatments; year; yield; zinc", "summary": "A severe lack of zinc in the soil can cause a complete crop loss, while a loss of up to 30 % in crop yields of cereals such as wheat, rice and corn can occur even because of slight deficiencies. The effect of Quantis treatment on crop yield in the case of winter wheat is especially outstanding in the case of drought stress, but positive results can also be achieved with its application in the case of heat stress.", "mime": "application/pdf"}, {"id": "cet-15035", "words": "3940", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15035", "date": null, "keywords": "composites; flexural; modulus; mustard; pla; properties; strength; waste; wt.%", "summary": "The PLA/mustard waste biocomposite exhibited a tensile strength of 34\u00b12 MPa, which is considerably lower than what has been reported for neat PLA in the literature (~50 MPa) Figure 1 shows the tensile strength and Young\u2019s modulus of PLA/mustard waste biocomposites filled with various amounts of PLA- g-MA.", "mime": "application/pdf"}, {"id": "cet-15036", "words": "3916", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15036", "date": null, "keywords": "analysis; building; damage; design; earthquake; material; performance; pga; soil; structures", "summary": "Moderately dense soil (Type C) may require more detailed investigation for seismic design than A and B. Loose soil (Type D) is most susceptible to shaking amplification, requiring careful design considerations. The analysis considered seismic performance (deflection) and material usage for sustainability.", "mime": "application/pdf"}, {"id": "cet-15037", "words": "3811", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15037", "date": null, "keywords": "analysis; data; day; energy; evapotranspiration; investment; irrigation; production; solar; system; water", "summary": "Conversely, the recent surge in energy prices is increasingly diminishing the return on investment (ROI) of solar energy investments. In countries such as Hungary, the utilisation of solar energy for irrigation represents a pivotal consideration.", "mime": "application/pdf"}, {"id": "cet-15038", "words": "3478", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15038", "date": null, "keywords": "cloud; damage; data; detection; methods; monitoring; point; research; surface", "summary": "Table 1: Evaluation of damage detection methods (advantageous: ++; normal: +; disadvantageous: -) Method type Complexity Technological demand Costliness Accuracy Applicability (1) The research methodology was conducted using the VOSviewer software to visually analyze bibliometric networks from a dataset of scientific publications, focusing on trends in structural health monitoring and highlighting key areas such as damage detection, computer vision, and AI-based techniques.", "mime": "application/pdf"}, {"id": "cet-15039", "words": "3719", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15039", "date": null, "keywords": "analogue; circuit; development; environment; mcu; modelling; models; simulation; software; system; testing", "summary": "In the Results and Discussion section, the simulator tools were evaluated and compared based on which sections of embedded system simulation they covered. The following summary gives some insight into the advantages and disadvantages of the investigated software solutions in embedded system simulation.", "mime": "application/pdf"}, {"id": "cet-15040", "words": "3223", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15040", "date": null, "keywords": "channel; figure; flow; model; obstructions; overland; simulation; volume; water", "summary": "2.1 Applied solvers HEC-RAS provides different 2D methods for flow simulation. The results were compared based on the following key aspects: - Analysis of flow behavior, including accurately representing eddy movements and comparing flow time series derived from overland flow simulations.", "mime": "application/pdf"}, {"id": "cet-15041", "words": "4114", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15041", "date": null, "keywords": "blockchain; chain; doi; management; pharmaceutical; resilience; supply; supply chain; technologies", "summary": "This view has been supported by Charles et al. (2023) as they emphasised the integrated function of AI and blockchain in improving supply chain resilience. On the other hand, Patil et al. (2023) further provide an assessment of the consequences of blockchain in manufacturing on visibility and traceability, Muralidharan et al. (2022) explained how mimicking modelling effectively evaluates supply chain resilience in front of crises like the COVID-19 pandemic.", "mime": "application/pdf"}, {"id": "cet-15042", "words": "4212", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-15042", "date": null, "keywords": "energy; et al; infrastructure; power; railway; sources; storage; systems; wind", "summary": "Integrating renewable energy into railway systems has been the subject of various studies. However, several challenges still exist in fully integrating renewable energy into railway systems.", "mime": "application/pdf"}, {"id": "cet-15043", "words": "2801", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15043", "date": null, "keywords": "analysis; concrete; element; heat; model; simulation; steel; temperature; welding", "summary": "To achieve this goal, this paper utilizes numerical simulations of welding processes based on experimental tests, with a specific focus on analyzing temperatures generated within the structures. Similarly, studies by Deng et al. (2007) and Zhao et al. (2018) have utilized Finite Element Analysis (FEA) to simulate welding processes, focusing on inherent strain theory and the design of welding structures.", "mime": "application/pdf"}, {"id": "cet-15044", "words": "2970", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15044", "date": null, "keywords": "color; conditions; illumination; images; light; lighting; segmentation; tomatoes; values", "summary": "The characteristics of tomato color are widely used as a good indicator for recognizing the ripeness level (Selvaraj et al., 2013), which is also related to sugar content, acidity, and flavor (Li et al., 2008). This threshold was expected to delineate the boundaries where image analysis for tasks such as tomato segmentation achieves maximum effectiveness, with suboptimal lighting conditions impairing the segmentation process.", "mime": "application/pdf"}, {"id": "cet-15045", "words": "4017", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15045", "date": null, "keywords": "bioplastics; cluster; commission; compost; european; leachate; management; microplastics; plastics; research; waste", "summary": "This software tool was utilised to construct and visualise bibliometric networks of primary keywords in the fields of compost leachate, biodegradable compostable plastic polymers, and the resulting microplastics. Compostable plastics form a subset of biodegradable plastics, which can only be broken down through industrial processes in specialised facilities for composting or anaerobic digestion.", "mime": "application/pdf"}, {"id": "cet-15046", "words": "4231", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15046", "date": null, "keywords": "building; construction; cornstalk; energy; insulation; materials; products; quilt; straw; water", "summary": "Using thermal insulation materials has become crucial to ensure the energy-efficient operation of buildings. Currently, over 90 % of thermal insulation materials are made from non-renewable sources, requiring significant fossil energy consumption during production (CMI, 2020).", "mime": "application/pdf"}, {"id": "cet-15047", "words": "3029", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15047", "date": null, "keywords": "air; dryer; drying; energy; flow; grain; process; temperature", "summary": "This results in a transparent drying process, which ensures better quality of dried grain (proteins, vitamins not destructed), a more secure drying process (reduced fire hazard) and warehousing (no microbes, no dust) and less energy consumption and less CO2 emission. Energy consumption for moisture evaporation is a primary concern for grain dryers.", "mime": "application/pdf"}, {"id": "cet-15048", "words": "2595", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15048", "date": null, "keywords": "friction; gear; lubrication; model; oil; tooth; unit; viscosity", "summary": "The vector of gear unit parameters: p = Table 2: Setting parameters to perform the sensitivity test working points 1 2 3 4 5 6 Mw, Nm 15.02 17.84 22.46 28.96 37.27 47.52 nw, rpm 104.23 208.46 312.7 416.93 521.16 625.93 t, s 300 300 300 300 700 300 Vector of gear unit parameter p =", "mime": "application/pdf"}, {"id": "cet-15049", "words": "3436", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15049", "date": null, "keywords": "average; changes; danube; diversion; groundwater; levels; replenishment; szigetk\u00f6z; water", "summary": "Table 1: Summary of calculated parameters that describe water level changes for three different periods Symbol Parameter name Unit Equation \u2206h reduced water level change For section D, while the baseline period remains 1953-1992, the period after the diversion considered for calculating the reduction in water levels is 2002-2013, and the effects of water replenishment are examined only in the 2013-2022 decade.", "mime": "application/pdf"}, {"id": "cet-15050", "words": "3960", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15050", "date": null, "keywords": "consumption; data; doi; energy; energy consumption; management; monitoring; project; research; results; system; time", "summary": "It is an essential element of the process that the experiment has been built upon to incorporate the most relevant innovation capabilities and features that the field of energy consumption systems and Energy Communities has recently represented. There is no debate that, for sustainability reasons, a global energy transition must be achieved, specifically through the decarbonisation of energy systems (Goldthau et al., 2020).", "mime": "application/pdf"}, {"id": "cet-15051", "words": "3882", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15051", "date": null, "keywords": "consumption; electricity; energy; gas; hungary; imports; security; storage; trilemma", "summary": "The drastic reduction in Russian energy imports has resulted in only a minimal decrease in the volume of imported oil and a 10 % decrease in natural gas imports in 2023 compared to 2022. Third, advancing energy system sustainability and security requires significant investments in energy storage and grid flexibility.", "mime": "application/pdf"}, {"id": "cet-15052", "words": "3749", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15052", "date": null, "keywords": "consumption; data; driving; energy; model; optimization; speed; strategy; system; telemetry; time; vehicle", "summary": "The system is ideal for collecting vehicle data and transmitting it wirelessly, despite potential obstructions from track buildings. The software handles data from both the vehicle and weather station, processing vehicle data at up to 5 Hz and wind data at 1 Hz.", "mime": "application/pdf"}, {"id": "cet-15053", "words": "3958", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15053", "date": null, "keywords": "complexity; development; ecosystem; energy; innovation; park; sustainability; systems; technologies; technology; theory; zalazone", "summary": "To make the energy sector more environmentally friendly, two things are needed: renewable energy producers and flexible energy solutions that enable the safe and regulated operation of energy systems. This combination enables a more holistic analysis of energy systems by capturing the technological characteristics of energy processes and the broader economic context, including stakeholder interactions and feedback effects.", "mime": "application/pdf"}, {"id": "cet-15054", "words": "3682", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15054", "date": null, "keywords": "batteries; battery; development; growth; hungary; industry; innovation; market; sustainability; testing; vehicles", "summary": "Figure 2. illustrates the importance of battery testing, highlighting its role in ensuring reliability, safety, and long- term performance. 891 Figure 2: The importance of battery testing 2. Methodology", "mime": "application/pdf"}, {"id": "cet-15055", "words": "2599", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15055", "date": null, "keywords": "capacity; efficiency; electricity; energy; figure; hydrogen; power; storage", "summary": "The roundtrip efficiency of hydrogen storage based on electrolysis and fuel cell systems is generally around 40 % (Headley and Schoenung, 2022), meaning that approximately 40 % of the energy used to produce hydrogen with electricity can be turned back into electricity. Green ammonia can improve onboard hydrogen storage and supply efficiency.", "mime": "application/pdf"}, {"id": "cet-15056", "words": "4350", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15056", "date": null, "keywords": "building; demand; design; electricity; energy; hydrogen; production; size; storage; system", "summary": "State-of-the-art Since hydrogen became a\u202fcentral piece of the\u202fdecarbonization puzzle, an increasing number of research articles deal with the exploitation of hydrogen energy storage systems in the building sector with the aim of achieving sustainability. Guo P., Musharavati F., Dastjerdi S.M.,2022, Design and transient-based analysis of a power to hydrogen (P2H2) system for an off-grid zero energy building with hydrogen energy storage.", "mime": "application/pdf"}, {"id": "cet-15057", "words": "3998", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15057", "date": null, "keywords": "collection; data; disposal; dumping; hungary; management; notifications; number; state; waste", "summary": "Illegal waste dumping, however, is a deviant behaviour (Pellow, 2004) that occurs daily, as it may range from throwing away a paper tissue to the improper dumping of heavy construction waste (Laundra, 2011). Illegal waste dumping poses significant environmental risks due to its potential impact on environmental effects and toxicity associated with the disposed materials.", "mime": "application/pdf"}, {"id": "cet-15058", "words": "3588", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15058", "date": null, "keywords": "apv; crop; cultivation; energy; panels; photovoltaic; power; systems", "summary": "Solar panel systems are considered agro-photovoltaic if their establishment and operation do not prevent the underlying land from being used as arable land according to its agricultural category (Hungarian Official Gazette, 2021). These include aquaculture, grazing, and crop cultivation systems (Silan et al., 2024).", "mime": "application/pdf"}, {"id": "cet-15059", "words": "3598", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15059", "date": null, "keywords": "consumers; demand; energy; grid; management; power; renewable; storage; system; voltage", "summary": "Energy management systems can assist in maintaining this balance in an economically efficient manner. Energy management systems can leverage the flexibility of the energy use cases and achieve optimal energy solutions.", "mime": "application/pdf"}, {"id": "cet-15060", "words": "4070", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15060", "date": null, "keywords": "energy; green; hungary; hydrogen; pem; plants; power; production; regulation; technology", "summary": "Establishing the average annual amount of PV energy that can be produced by a 1 kWp grid- connected PV power plant in Hungary by modelling Calculating the total of the average annual amount of PV energy that can be produced by all of Hungary\u2019 scheduled PV power plants (first quarter 2024) Determining the average negative regulatory demand related to the annual energy production based on the ratio of the average annual downward regulation compared to the actual power generation Calculating the amount of green hydrogen that could be produced with the amount of electric energy equal to the average annual downward regulation demand using PEM technology 927 3. Results and discussion The approximate requirement of Hungarian PV power plants for downward regulation related to schedule keeping is 6.5 % of the annual PV power generation, which is the same percentage in the cases of both daily and intraday forecasts. Material and methods This study investigates the amount of green hydrogen that can be potentially produced in connection with the downward regulation of PV power plants based on the average negative regulatory demand related to the annual energy production, which was determined earlier for Hungary's total capacity of all scheduled PV power plants (first quarter 2024)", "mime": "application/pdf"}, {"id": "cet-15061", "words": "3575", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15061", "date": null, "keywords": "capacity; doi; energy; grid; production; renewable; solutions; sources; storage; system", "summary": "Falcinelli, S., 2020, Fuel production from waste CO2 using renewable energies. Technical challenges of green transition From a bird\u2019s eye view, there are clear steps of the green transition in the energy sector: producing electricity from renewable energy sources, replacing fossil fuel-based vehicles with electric ones, and replacing the gas-, oil-, or coal-fuelled stationary energy consumers (heating, industrial applications etc.) to electric solutions.", "mime": "application/pdf"}, {"id": "cet-15062", "words": "3766", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-15062", "date": null, "keywords": "battery; data; market; model; nio; report; sales; tesla; vehicle", "summary": "The sales prices of NIO batteries only account for approximately 27 % of the total vehicle purchase price (in the case of a vehicle equipped with a 100 kWh battery), while under the most favorable configuration, the 75 kWh energy storage system represents only 20-24 % of the total vehicle sales price. Figure 1: The sales prices of selected Tesla & NIO models, and the battery prices derived from the sales prices, Tesla data: (Manansala, 2023; Tesla Model S, 2015; Senn-Kalb and Mehta, 2022; \u00a92024 EV Database, 2024a; \u00a92024 EV Database, 2024b; Lu, 2023; Team skills.ai, 2024); NIO data: (NIO ET5, 2023; Zhang, 2024)", "mime": "application/pdf"}, {"id": "cet-15063", "words": "4452", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15063", "date": null, "keywords": "assets; enterprises; financing; food; growth; increase; industry; profit; sector; \ud835\udc41\ud835\udc52\ud835\udc61 \ud835\udc43\ud835\udc5f\ud835\udc5c\ud835\udc53\ud835\udc56\ud835\udc61; \ud835\udc45\ud835\udc52\ud835\udc61\ud835\udc4e\ud835\udc56\ud835\udc5b\ud835\udc52\ud835\udc51 \ud835\udc43\ud835\udc5f\ud835\udc5c\ud835\udc53\ud835\udc56\ud835\udc61", "summary": "The role of the food economy, which includes agriculture and the food industry based on it, is now undisputed due to its strategic global importance, the combination of population and food demand growth, and the impact of the territorial and ecological constraints imposed by the nature of the food (Bene et al. 2016) Taking sustainable growth rates into account is an important planning parameter.", "mime": "application/pdf"}, {"id": "cet-15064", "words": "4100", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15064", "date": null, "keywords": "bacteria; doi; effects; feed; gut; performance; production; sows; spp; supplementation; yeast", "summary": "Experimental sows received probiotic supplementation (n=10) and were compared to control sows (n=10). Differences in backfat thickness (BFT), BFT loss, and feed intake of control and experimental sows were not significant (p>0.05).", "mime": "application/pdf"}, {"id": "cet-15065", "words": "3245", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15065", "date": null, "keywords": "energy; graph; model; operation; process; production; time", "summary": "Figure 1: (a) Production process of a laminated cupboard (b) Idle times of operations in the morning shift Table 2: Energy balance for renewable energy production and consumption Time Consumed Note that the time resolution of the model can be easily increased, but practically, neither the forecast of renewable energy production nor the energy market price estimate has a resolution higher than a quarter of an hour.", "mime": "application/pdf"}, {"id": "cet-15066", "words": "4015", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15066", "date": null, "keywords": "data; doi; engineering; fake; intelligence; learning; media; model; news; research; text", "summary": "As a result, a model with high accuracy was built, which could be used for fake news classification in social media posts related to the environmental field. In addition, the model can be used to build an early warning monitoring system that continuously monitors potential environmental fake news on social media, which environmental officers can evaluate and refute in the appropriate forums if alarmed.", "mime": "application/pdf"}, {"id": "cet-15067", "words": "3767", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15067", "date": null, "keywords": "applications; displacement; filaments; infill; materials; pattern; pla; printing; research", "summary": "It was essential to use various PLA materials in the research and affordable and easily accessible printers to produce test pieces so that the results could be used more widely. Additionally, while this research provides a foundation for sustainable 3D printing materials, it did not account for the entire lifecycle impact, particularly recycling and material reuse.", "mime": "application/pdf"}, {"id": "cet-15068", "words": "4730", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15068", "date": null, "keywords": "agriculture; animal; doi; farmers; fms; food; fruit; hungarian; production; products; research; sample; supply; vegetable", "summary": "al. 973 (2023), which mapped the main motivations for local food production and distribution, with environmental sustainability, community building, supply chain transparency, direct support to farmers, and transfer of knowledge about food and agriculture to consumers as key factors. The findings indicate that the owners of arable crop production farms are the oldest, and that these farms have been established for the longest time.", "mime": "application/pdf"}, {"id": "cet-15069", "words": "4256", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15069", "date": null, "keywords": "eggs; hatchability; impact; paper; plastic; transport; trays; vibration", "summary": "However, this is a learning process, because of the complexity of hatching egg transport, similar to a three-arm balance of transport condition, packaging material and egg quality. Plastic trays are often favoured over paper ones for sustainability purposes in egg transport.", "mime": "application/pdf"}, {"id": "cet-15070", "words": "4129", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15070", "date": null, "keywords": "biotechnology; case; court; crispr; development; dna; hungarian; inventions; law; patent; patentability; protection", "summary": "The legal research methodology includes focuses on statutory provisions and judicial decisions pertinent to biotechnology patents. By integrating these methodologies, the study provides an analysis of the legal framework governing biotechnology patents.", "mime": "application/pdf"}, {"id": "cet-15071", "words": "4292", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15071", "date": null, "keywords": "america; clean; energy; european; green; hydrogen; lac; latin; policies; production; projects", "summary": "The goal of the research is to compare strategic objectives and production results of H2 deployment in two major regions with different energy backgrounds, aiming to understand the progress of green H2 production. The activities in the field of green H2 production and utilization are supported by organizational and funding instruments e.g. the Clean Hydrogen Alliance (CHA).", "mime": "application/pdf"}, {"id": "cet-15072", "words": "3138", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15072", "date": null, "keywords": "data; doi; driver; driving; efficiency; energy; eye; interface; speed; tracking; vehicle", "summary": "This research utilizes a wearable eye-tracking device to measure drivers' focus and distraction levels while also logging driving performance and energy consumption data. The addition of the Average Joule/Laptime (J/L) metric, derived from energy consumption data, provides a comprehensive view of each driver's performance and interaction with different user interfaces.", "mime": "application/pdf"}, {"id": "cet-15073", "words": "3543", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15073", "date": null, "keywords": "algorithm; discrete; logistics; metaheuristics; optimization; problem; solution; tasks", "summary": "This can increase the efficiency of solving logistics problems and expand the use of the latest optimization techniques. 2. Literature review Due to their NP-hard complexity, metaheuristics are often applied to logistics problems.", "mime": "application/pdf"}, {"id": "cet-15074", "words": "3779", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15074", "date": null, "keywords": "algorithm; exact; metaheuristic; optimization; parameter; problem; results; task; time", "summary": "Many metaheuristic algorithms have already been used in logistics, but there is little real use of these techniques. biro.tamara@sze.hu Metaheuristic algorithms are well-researched and popular techniques in the field of optimization, which can solve complex tasks with a large number of instances with acceptable quality.", "mime": "application/pdf"}, {"id": "cet-15075", "words": "4055", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-15075", "date": null, "keywords": "attitudes; chain; companies; integration; management; performance; relationships; supply; supply chain", "summary": "The quality of relationships, especially the relationship dimension, has a direct impact on supply chain performance, underpinning the importance of relationship building and management in supply chains. The study employs a novel categorisation scheme derived from the conceptual framework of supply chain management and aims to contribute to the existing supply chain management literature by providing insight into the correlations between supply chain performance and quality of customer-supplier relationships from the perspective of relationship quality researchers.", "mime": "application/pdf"}, {"id": "cet-15076", "words": "3144", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15076", "date": null, "keywords": "data; events; flood; flows; model; m\u00f3richida; peak; regression; river; variables", "summary": "Multi-level regression analysis, incorporating first- and second-order polynomials, was used to predict flood peaks at this outflow. Confidence and prediction intervals confirmed the model's accuracy, predicting flood peaks within \u00b110 m3/s, offering a reliable, less complex alternative to traditional models.", "mime": "application/pdf"}, {"id": "cet-15077", "words": "3718", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15077", "date": null, "keywords": "flooding; flow; infiltration; management; model; nbs; peak; stormwater; system; urban; water", "summary": "The results underscore the advantages of integrating strategic infrastructural enhancements in stormwater systems. Traditional urban stormwater management has primarily relied on grey infrastructure, which includes expanding drainage networks and enlarging drainage pipes to transport water quickly away from urban areas.", "mime": "application/pdf"}, {"id": "cet-15078", "words": "3702", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-15078", "date": null, "keywords": "consumption; doi; drag; electric; energy; force; rain; results; simulation; vehicle", "summary": "Nurun N., Biplob R., Fazlur R., Wisam A. H., Muyeen S. M., 2023, Parametric analysis and prediction of energy consumption of electric vehicles using machine learning. A range of parameters are studied to improve vehicle energy consumption.", "mime": "application/pdf"}, {"id": "cet-15079", "words": "3040", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15079", "date": null, "keywords": "absorption; aggregate; ash; concrete; fly; results; strength; water", "summary": "The connection between an original technique (MORRA) and multi-recycled aggregate concrete is the unique approach to choosing the optimal concrete mixture from seven options considering cost, water absorption, high performance, and EI. This work presents water absorption and compressive strength testing of re-recycled aggregate concrete with fly ash and silica fumes.", "mime": "application/pdf"}, {"id": "cet-15080", "words": "4231", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15080", "date": null, "keywords": "citizens; countries; governance; government; institutional; level; performance; study; sustainability; trust", "summary": "The study found that although there is a significant correlation between various factors of institutional trust at the national level, there is no meaningful relationship between general and institutional trust across the examined countries (Czech Republic, Hungary, Slovakia, and Poland). The analysis found that institutional trust is influenced more by endogenous factors, such as perceived governance effectiveness and citizen satisfaction, than by general trust.", "mime": "application/pdf"}, {"id": "cet-15081", "words": "4009", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15081", "date": null, "keywords": "buildings; calculation; case; doors; glazing; gwp; material; values; windows", "summary": "Asif M., Davidson A., Muneer T., 2002, Life cycle of window materials \u2013 A comparative assessment, <https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=857c90e347677aa9deee562e0a72cffc 12526294>, accessed 22.10.2024. The growing availability of better-quality, modern building materials and structural solutions allows for stricter energy regulations.", "mime": "application/pdf"}, {"id": "cet-15082", "words": "3796", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15082", "date": null, "keywords": "c60; center; cuo; friction; fullerene; nanoparticles; oil; sio2; wear; y2o3", "summary": "The use of Y2O3 nanoparticles in liquid lubricants has been scarcely researched. SiO2, CuO, and Y2O3 nanoparticles were added to the lubricating oils as well.", "mime": "application/pdf"}, {"id": "cet-15083", "words": "3942", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15083", "date": null, "keywords": "bess; community; electricity; energy; energy storage; grid; management; parks; storage; system", "summary": "P2G (power-to-gas) combined with polygeneration is a viable solution for renewable energy storage. References Barbour E., Parra D., Awwad Z., Gonz\u00e1lez M. C., 2018, Community energy storage: a smart choice for the smart grid?", "mime": "application/pdf"}, {"id": "cet-15084", "words": "3248", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15084", "date": null, "keywords": "complex; content; copper; effect; protein; sulphate; tetramine; treatment; wheat; yield", "summary": "In copper-deficient soils of winter wheat, foliar fertilisation with copper treatments has been reported to improve nitrogen uptake (Schmidt et al., 2004). Figure 3: Effect of copper treatments on yield.", "mime": "application/pdf"}, {"id": "cet-15085", "words": "3948", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15085", "date": null, "keywords": "cost; graph; reliability; retrofitting; structure; system; transportation; wastewater", "summary": "The methods to determine system reliability can be split into two major categories: deterministic and stochastic. 2. Methodology This section presents the methodology proposed to find retrofitting alternatives that improve the reliability of wastewater transportation systems.", "mime": "application/pdf"}, {"id": "cet-15086", "words": "3648", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15086", "date": null, "keywords": "aldrin; biosolids; chemical; matter; plant; reduction; results; sample; soil; treatment; use; wastewater", "summary": "3.3 Reduction of Aldrin with biosolids treatment. For the investigation, soil samples were taken from the Carabayllo area, and 2 kg were placed in each container; then, biosolids from the wastewater treatment plant were added in proportions of 10, 20, and 30 %, respectively.", "mime": "application/pdf"}, {"id": "cet-15087", "words": "2804", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15087", "date": null, "keywords": "conversion; hydrogen; membrane; methane; reactor; reforming; steam; temperature; \ud835\udc43\ud835\udc43\ud835\udc3b\ud835\udc3b2", "summary": "Conclusions This study has demonstrated that the assimilation of a variable overall heat transfer coefficient (UOR) in a non- isothermal model simulation of steam methane reforming (SMR) improves the predictive accuracy of the simulation for both packed-bed reactors (PBR) and membrane reactors (MR) Results show that membrane reactors outperform PBRs by reaching a higher methane conversion under similar operating conditions. Mathematical Model Reaction Kinetics In general, steam methane reforming is modeled through three key global reactions: methane reforming reaction (Endothermic): CH4 +", "mime": "application/pdf"}, {"id": "cet-15088", "words": "3926", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-15088", "date": null, "keywords": "adsorbent; adsorption; cooking; cooking oil; oil; rice; rsa; size; straw", "summary": "Rice straw was collected and developed into an adsorbent based on its ability to reduce the peroxide value (PV) of used cooking oil (UCO). The particle size, adsorption capacity, functional groups on adsorbent surface, surface morphology, and pore size of the adsorbent were determined, and its performance on improving the quality of used cooking oil in terms of peroxide value, acid value (AV), and color were tested.", "mime": "application/pdf"}, {"id": "cet-15089", "words": "3559", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15089", "date": null, "keywords": "diameter; electrospun; engineering; fiber; pcl; pcl+ppy; polypyrrole; ppy; properties; scaffolds; tissue", "summary": "SEM images confirmed that PCL+PPy scaffolds maintained a fibrous and porous structure, with a reduced average fiber diameter compared to pure PCL scaffolds, enhancing porosity and surface area. PPy incorporation enhances scaffold uniformity and reduces average diameter compared to pure PCL scaffolds, which is beneficial for tissue formation, mechanical behavior, and facilitating charge transport critical for electrical conductivity in CTE.", "mime": "application/pdf"}, {"id": "cet-15090", "words": "3388", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15090", "date": null, "keywords": "agnps; chitosan; cht; diameter; nanofibers; pcl; properties; solution; textile", "summary": "Figure 1d illustrates the PCL fibers deposited onto F. Figure 1: Morphology of F, nanofiber and F with nanofibers observed by SEM of (a) initial F 50X, (b) initial F 500X (c) PCL nanofibers 500X, (d) PCL nanofibers on the F 500X. Figures 2 and 3 show independent PCL/CHT and PCL/Ag nanofibers and those deposited on F. In general, nanofibers exhibit a smooth, bead-free surface, distributed uniformly. This result is due to the hydrophobic character of the base polymer of the PCL nanofibers, as it is known in the literature for the molecular composition of PCL nanofibers (Tiyek et al., 2019).", "mime": "application/pdf"}, {"id": "cet-15091", "words": "3481", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15091", "date": null, "keywords": "agents; gasification; gasifying; oxygen; sawdust; steam; synthesis; temperature; wood", "summary": "As shown in Table 1, torrefied wood sawdust contains higher carbon content but low hydrogen content compared to the raw wood sawdust which ultimately contributes to more carbon monoxide production and less hydrogen production for torrefied wood sawdust gasification. Among gasification agents, air is widely used in gasification process due to its abundant resource and simple to employ.", "mime": "application/pdf"}, {"id": "cet-15092", "words": "3829", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15092", "date": null, "keywords": "bar; cavitation; color; et al; inlet; orifices; pressure; removal; vinasse", "summary": "However, after 60 min, a general decrease in color removal efficiency is observed for both configurations, being more pronounced in the 2 bar and 9 orifices condition, with a reduction of 2.45% \u00b1 0.067. Hydrodynamic cavitation significantly improves the removal of color and polyphenols, being a viable alternative to reduce toxicity in alcoholic vinasse, contributing to environmental improvements for the alcohol industry.", "mime": "application/pdf"}, {"id": "cet-15093", "words": "3610", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15093", "date": null, "keywords": "design; extraction; solvent; temperature; tpc", "summary": "In this study, Plackett-Burman design (PBD) was used for screening to select three significant factors among seven factors including ethanol content, extraction duration, solvent/solid ratio, extraction temperature, pH, and drying temperature for the ultrasound-assisted extraction of bioactive compounds from eggplant (Solanum melongena) peels. Liao, J., Xue, H., & Li, J., 2022, Extraction of phenolics and anthocyanins from purple eggplant peels by multi- frequency ultrasound: Effects of different extraction factors and optimization using uniform design, Ultrasonics Sonochemistry, 90, 106174.", "mime": "application/pdf"}, {"id": "cet-15094", "words": "2634", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15094", "date": null, "keywords": "diesel; oil; plastic; process; pyrolysis; recycling; waste", "summary": "Despite these challenges, governments and private companies in Latin America are taking steps to promote plastic recycling and reduce plastic waste. Recent advances on waste plastic thermal pyrolysis: A critical overview.", "mime": "application/pdf"}, {"id": "cet-15095", "words": "3942", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15095", "date": null, "keywords": "concentration; density; et al; films; food; glycerol; polymers; potato; properties; starch; thickness", "summary": "There were significant differences between all treatments on the solubility index of potato starch films (Figure 2A). Table 1: Anova test on potato starch films characteristics.", "mime": "application/pdf"}, {"id": "cet-15096", "words": "3399", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-15096", "date": null, "keywords": "chevron; design; drop; exchanger; heat; plate; pressure; transfer", "summary": "Experimental and numerical analyses were conducted by Martins, et al., (2022) to evaluate the structural behaviour of plate heat exchangers with 316 L stainless steel plates. A typical industrial unit of plate heat exchanger has a size range from 1540 to 2500 m2 containing up to 700 plates with port sizes up to 39 cm.", "mime": "application/pdf"}, {"id": "cet-15097", "words": "3425", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15097", "date": null, "keywords": "abts; activity; antioxidant; arborescens; bark; dpph; extract; leaves; stem", "summary": "Accepted: 05 February 2025 Please cite this article as: Haryoto H., Trinanda E., Santoso B., Nagara M.D.S., Liwanda N., Nurcholis W., 2025, Phytochemical Composition and Comparative Antioxidant Activity of Leaf and Stem Bark Extracts of Glochidion arborecens Using DPPH and ABTS Assays, Chemical Engineering Transactions, 115, 19-24 DOI:10.3303/CET25115004 CHEMICAL ENGINEERING TRANSACTIONS VOL. 115, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Carlo Pirola, Antonio Espu\u00f1a, Sabrina Copelli Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-16-8; ISSN 2283-9216 Phytochemical Composition and Comparative Antioxidant Activity of Leaf and Stem Bark Extracts of Glochidion arborecens Using DPPH and ABTS Assays Haryotoa, Edtano Trinandaa, Broto Santosoa, Muhammad Dohir Siaga Nagaraa, Novian Liwandab, Waras Nurcholisb,c,* aPharmaceutical Chemistry Department, Faculty of Pharmacy, Universitas Muhammadiyah Surakarta, Kartasura, Central Java 57169, Indonesia bDepartment of Biochemistry, Faculty of Mathematics and Natural Sciences, IPB University, Bogor, West Java 16680, Indonesia cTropical Biopharmaca Research Center, IPB University, Bogor, West Java 16680, Indonesia wnurcholis@apps.ipb.ac.id This study explores the phytochemical composition and antioxidant activity of ethanol extracts from the leaves and stem bark of Glochidion arborescens. Antioxidant activity was evaluated using DPPH and ABTS assays, with vitamin C as the positive control.", "mime": "application/pdf"}, {"id": "cet-15098", "words": "4668", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-15098", "date": null, "keywords": "c h; concentration; exergy; h h; h n; h o; o c", "summary": "hydrolysis reactions Conversion 2 6 2 2 4 2 42 2C H O CO C H O CH+ \u2192 + Ethanol 0.6 \u00b1 0.1 (1) 5 8 4 2 5 10 5C H O H O C H O+ \u2192 Hemicellulose 0.6 \u00b1 0.0 (2) 5 8 4 2 2 4 22.5C H O H O C H O+ \u2192 Hemicellulose 0.5 \u00b1 0.2 (3) 5 10 5 5 4 2 23C H O C H O H O+ \u2192 Xylose 0.6 \u00b1 0.0 (4) 6 12 6 2 2 6 22 2C H O H O C H O CO+ \u2192 + Cellulose 0.4 \u00b1 0.1 (5) ( )6 12 6 2 6 12 6n C H O H O nC H O+ \u2192 Cellulose 0.4 \u00b1 0.1 (6) ( )6 12 6 2 6 12 6n C H O H O nC H O+ \u2192 Starch 0.6 \u00b1 0.2 (7) H O H O C H O C H O C H O+ \u2192 + + Palmito-linolein 0.6 \u00b1 0.2 (10) 37 70 5 2 3 8 3 16 34 18 34 24.1 2.1 0.9 0.9C H O H O C H O C H O C H O+ \u2192 + + Palmito-olein 0.6 \u00b1 0.2 (11) 51 98 6 2 3 8 3 16 348.436 4 2.43C H O H O C H O C H O+ \u2192 + Tripalmate 0.5 \u00b1 0.3 (12) 57 104 6 2 3 8 3 18 34 23 3C H O H O C H O C H O+ \u2192 + Triolein 0.5 \u00b1 0.2 (13)", "mime": "application/pdf"}, {"id": "cet-15099", "words": "3294", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15099", "date": null, "keywords": "adsorbent; adsorption; biochar; cassava; hydroxyapatite; meretrix; meretrix meretrix; meretrix shells; shells", "summary": "SEM-EDX results obtained showed the morphology of hydroxyapatite-biochar adsorbents of Meretrix meretrix shells and cassava peel (Manihot esculenta) biochar, favoured to Cd (II) removal. This research contributes to the adsorption of cadmium using a composite of HAp from Meretrix meretrix shells-biochar from cassava peel waste as a green adsorbent.", "mime": "application/pdf"}, {"id": "cet-15100", "words": "3616", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15100", "date": null, "keywords": "chemical; exposure; hazards; health; hexane; industries; potential; risks; safety; workers; workplace", "summary": "Acute and chronic health impacts are possible outcomes of exposure to n- hexane. (Safe work Australia, 2024) Industrial Safety and Health Act, Occupational Safety and Health Administration (OSHA) Regulates the handling of hazardous substances, including n- hexane, requiring employers to implement safety measures and monitor exposure levels.", "mime": "application/pdf"}, {"id": "cet-15101", "words": "2968", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15101", "date": null, "keywords": "akts; c80; pit; polymerization; results; table", "summary": "Examples of C80 measurement results and determination of the 0.5% reaction point are shown in Figure 1. Figure 1(a): Examples of C80 measurement results (b): The area enclosed by the dashed line in (a) is enlarged.", "mime": "application/pdf"}, {"id": "cet-15102", "words": "2930", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15102", "date": null, "keywords": "baseline; european; ied; installations; operator; reference; soil", "summary": "Among them, we could cite the European guidelines on baseline reports for IED installations (2014/C 136/03), the Joint Research Centre\u2019s Report on environmental monitoring (JRC, ROM- 2018), the Ministerial Decree 95/2019 and the SNPA Guidelines n.48/2023, as relevant for the topic. In section 3 the final checklist to assess IED baseline reports is outlined, while section 4 concludes the paper addressing further research works.", "mime": "application/pdf"}, {"id": "cet-15103", "words": "3685", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-15103", "date": null, "keywords": "air; bacteria; filter; filtration; gnrs; graphene; membrane; mesh; nanoribbons; resistance; stainless; steel", "summary": "The effective fine dust filtration of GNRs onto stainless steel mesh is shown in Table 2. Graphene was widely investigated as antibacterial air filter membranes.", "mime": "application/pdf"}, {"id": "cet-15104", "words": "3678", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15104", "date": null, "keywords": "air; area; drone; emission; flux; odour; sampling; source; surface", "summary": "Despite the description in some protocols, like VDI-3880 (2011) of how to sample area sources, it was demonstrated by the last version of European standard (EN-13725:2022) that it is impossible to fix a consensus about the sampling method for such emission sources. FC and WT are one part of sampling protocol dedicated to area sources (Duan et al., 2021).", "mime": "application/pdf"}, {"id": "cet-15105", "words": "3078", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15105", "date": null, "keywords": "chemical; controller; model; mpc; oil; pid; point; process; set; state; subsystem", "summary": "Response of MPC controller for disturbance rejection Figure 3b: Response of PID controller for disturbance rejection MPC and PID controllers show good performance in disturbance rejection. Figure 4a: Response of MPC controller for set-point tracking Figure 4b:", "mime": "application/pdf"}, {"id": "cet-15106", "words": "4144", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15106", "date": null, "keywords": "accuracy; data; dataset; detection; foam; images; synthetic", "summary": "A survey on image data augmentation for deep learning. Stuyck, T. and Demeester, E., (2024), Impact of using GAN generated synthetic data for the classification of chemical foam in low data availability environments, in Proceedings of the 13th international conference on pattern recognition applications and methods, 620-627.", "mime": "application/pdf"}, {"id": "cet-15107", "words": "3192", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15107", "date": null, "keywords": "analysis; biomass; biomasses; energy; kinetic; pepper; pomace; pyrolysis; tomato", "summary": "a. b. 82 As shown in Table 4, activation energy (Ea) for hot pepper is between 11.79 and 27.17 kJ\u00b7mol-1 where the D2 mechanism shows the best value of the correlation coefficient (R\u00b2=0.93) suggesting that this mechanism best describes the reaction kinetics for hot pepper pyrolysis. nazimnazim2@gmail.com This study aims at investigating the pyrolysis kinetic parameters of hot pepper waste with a comparative analysis against tomato pomace; a material previously explored in the literature.", "mime": "application/pdf"}, {"id": "cet-15108", "words": "2828", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15108", "date": null, "keywords": "coagulant; concentration; floccosa; minutes; opuntia; silica; treatment; water", "summary": "In some regions, the scarcity of water resources exacerbates the problem, making water treatment a critical issue for both local governments and industries. Opuntia floccosa has shown particular promise due to its high availability in Andean regions, ease of collection, and demonstrated efficacy in previous studies on water treatment.", "mime": "application/pdf"}, {"id": "cet-15109", "words": "3119", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15109", "date": null, "keywords": "design; employee; research; risk; robot; safety; system; technologies; warehouse", "summary": "What are the implications of using DT technologies for risk assessment and the development of safety cases in human-robot collaboration scenarios? Management failures can also include delays in adopting necessary safety technologies or neglecting to enforce safety protocols rigorously.", "mime": "application/pdf"}, {"id": "cet-15110", "words": "3347", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15110", "date": null, "keywords": "alarms; data; detection; figure; models; reaction; runaway; temperature", "summary": "Left: comparison of TB, HJ and DIV models with temperature changes in reaction temperature (heat- up/cool-down) performed with adjusted critical thresholds; Right: comparison of the models for a runaway reaction initiated at 86 minutes 11 6. Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-18-2; ISSN 2283-9216 Investigation of Models for Online Runaway Detection at the Esterification of Acetic Anhydride with Methanol Carsten Schmidta,*, J\u00fcrgen Schmidta, Jens Deneckea, Yongbo Xina aCSE Center of Safety Excellence (CSE-Institut), Joseph-von-Fraunhofer-Str. 9, 76327 Pfinztal, Germany bHochschule Karlsruhe \u2013 University of Applied Sciences (HKA), Moltkestra\u00dfe 30, 76133 Karlsruhe, Germany carsten.schmidt@cse-institut.de Models for the online detection of runaway reactions in chemical plants promise to increase the safe operation of chemical processes.", "mime": "application/pdf"}, {"id": "cet-15111", "words": "4058", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15111", "date": null, "keywords": "20l; cfd; dispersion; dust; et al; explosion; gases; mechanisms; powders; pyrolysis; reaction; simulation", "summary": "Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-18-2; ISSN 2283-9216 New Pyrolysis Mechanisms for Dust Explosion Simulation Tima Al Haffara, Nathalie Bardin-Monniera, Maria Portarapillob, Almerinda Di Benedettob, Olivier Dufauda,* aUniversit\u00e9 de Lorraine, CNRS, LRGP, F-54000 Nancy, France bUniversity of Naples Federico II, 80125 Napoli, Italy olivier.dufaud@univ-lorraine.fr Numerical simulation of dust explosions can be used for intensive, multi-parameter sensitivity studies, reducing the number of experimental tests required. Several articles were already published on this subject (Islas et al., 2023; Portarapillo et al., 2021; Zhang et al., 2024) but most of the studies combining CFD and dust explosion only consider the powder dispersion stage, without simulating the reaction stages of pyrolysis, oxidation/combustion, and flame propagation within the 20L sphere (Pico et al., 2020).", "mime": "application/pdf"}, {"id": "cet-15112", "words": "3160", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15112", "date": null, "keywords": "cfd; gru; leak; leakage; model; networks; recurrent; simulations; source; training; wind", "summary": "2.3 Optimisation of GRU models The GRU were developed using Python version 3.7.7, TensorFlow 1.14.0, and Keras 2.3.1. Rapid detection and location of leak sources are crucial for timely corrective maintenance, mitigating the most hazardous situations.", "mime": "application/pdf"}, {"id": "cet-15113", "words": "2908", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15113", "date": null, "keywords": "assessment; data; ergonomics; experience; levels; questionnaires; risk; stress; workers", "summary": "The Kinect sensor captures precise video data that, when analyzed with CV, identifies repetitive actions, facilitating a semi-automated process and the evaluation of biomechanical risk assessments using the OCRA checklist method. This approach helped identify awkward postures and repetitive movements contributing to biomechanical risks.", "mime": "application/pdf"}, {"id": "cet-15114", "words": "3313", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15114", "date": null, "keywords": "failure; flammability; methanol; modes; process; safety; system; tank", "summary": "However, the complexity as the characteristic of process industries brings different challenges when conducting industrial monitoring for the sake of system safety, which is summarized as lacking a holistic view of target systems. The results contribute to building a comprehensive pattern of the target system and figuring out key variables that are sensible toward system safety under multiple failure modes.", "mime": "application/pdf"}, {"id": "cet-15115", "words": "3305", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15115", "date": null, "keywords": "chemical; compounds; data; descriptors; flash; mixtures; models; qspr", "summary": "This research aims to investigate if integrating advanced AI analytical methods can enhance the performance and applicability of QSPR models for predicting the physical hazards of chemical mixtures. Considering that we successfully developed QSPR models based on multilinear regression for the flash point of chemical mixtures in previous works (Fayet and Rotureau, 2019;", "mime": "application/pdf"}, {"id": "cet-15116", "words": "4094", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-15116", "date": null, "keywords": "attacks; chemical; control; cybersecurity; plants; process; risks; safety; seveso; systems", "summary": "Additionally, the lack of segregation between operational (OT) and traditional IT networks may allow attackers to access critical systems (Landucci et al.,2015). Where possible and following a critical event, Seveso inspectors can ask the Manager for detailed logs to monitor the activities on critical systems during an incident, analyzing the procedures to examine the logs and anomalies detected during the critical event (accident as an explosion, a fire, a toxic release, an eco-toxic release, etc.).", "mime": "application/pdf"}, {"id": "cet-15117", "words": "2889", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15117", "date": null, "keywords": "cfd; distribution; gaussian; model; predictions; simulations; surrogate", "summary": "6.2 Surrogate fitness for Q9 volume predictions We plotted the probabilities of exceedance for Q9 volumes, as predicted by the surrogate and by CFD in Figure 4. Surrogate predictions: distribution of max Q9 volume (left); probability of Q9 volume exceedance (right).", "mime": "application/pdf"}, {"id": "cet-15118", "words": "3184", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15118", "date": null, "keywords": "function; iec; machinery; process; risk; safety", "summary": "A practical approach on how to implement safety functions that consist of Machinery Safety and Process Safety components is given in IEC TS 63394 - although this document focusses on implementing Process Safety components into Machinery Safety functions. The challenge is that, when separating the discussion \u2013 e.g. first discuss Machinery Safety risks and afterwards discuss process safety risks \u2013 one might end up with two separate safety functions that need to be implemented.", "mime": "application/pdf"}, {"id": "cet-15119", "words": "3072", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15119", "date": null, "keywords": "accident; analysis; completeness; hazard; hazop; language; lessons; risk; taylor", "summary": "Revised: 22 February 2025; Accepted: 20 April 2025 Please cite this article as: Taylor J., 2025, Using Accident Anatomy Analysis and Small Language Models to Support Systematic Lessons Learned Analysis and Improve the Completeness of Hazard Analysis, Chemical Engineering Transactions, 116, 61-66 DOI:10.3303/CET25116011 CHEMICAL ENGINEERING TRANSACTIONS VOL. 116, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Bruno Fabiano, Valerio Cozzani Systematic_Lessons_Learned_Analysis_for_Oil_and_gas_Plant, (139 accidents, 426 lessons learned) \u00b7 66 https://www.csb.gov/ http://shippai.jst.go.jp/en/Search http://www.shippai.org/fkd/en/lisen/cat102.html 11taylor.pdf Using Accident Anatomy Analysis and Small Language Models to Support Systematic Lessons Learned Analysis and Improve the Completeness of Hazard Analysis", "mime": "application/pdf"}, {"id": "cet-15120", "words": "2978", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15120", "date": null, "keywords": "case; coupling; depth; ponding; tunnels; utility; water", "summary": "The ponding inside utility tunnels coupled with personnel evacuation is analysed as a case study. The results show that the current design of utility tunnels is insufficient for preventing ponding-triggered drowning in heavy rain like the \u201c7.20\u201d rainstorm.", "mime": "application/pdf"}, {"id": "cet-15121", "words": "3920", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15121", "date": null, "keywords": "fire; flame; incident; method; pool; radiation; segments; view", "summary": "Distribution of incident thermal radiation flux on an exposed storage tank shell from (a) a vertical fire plume, and (b) a tilted fire plume, using the present method. Table 1: Relative differences of incident thermal radiation flux from a vertical fire plume using the present method and the method described by Beyler (2016).", "mime": "application/pdf"}, {"id": "cet-15122", "words": "3499", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15122", "date": null, "keywords": "burning; flame; flow; piv; turbulence; velocity; zone", "summary": "Figure 4: Results of turbulent burning velocity Concerning the influence of the equivalence ratio on burning velocity, with the 6-\u03bcm powder, an increase in the burning velocity with the equivalence ratio is observed. Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-18-2; ISSN 2283-9216 Evolution of Turbulent Burning Velocity and Turbulence Intensity during Aluminum Flame Propagation Cl\u00e9ment Chanuta,*, Fares Saad Al Hadidia, Fr\u00e9d\u00e9ric Heymesa, Ernesto Salzanob aLaboratoire des Sciences des Risques, IMT Mines Al\u00e8s, Al\u00e8s, France bDipartimento di Ingegneria Civile, Ambientale, e dei Materiali, Universit\u00e0 di Bologna, Bologna, Italy clement.chanut@mines-ales.fr Burning velocity, i.e. the consumption rate of the reactant by the flame front, is a key parameter for modelling flame propagation during accidental gas or dust explosions.", "mime": "application/pdf"}, {"id": "cet-15123", "words": "2912", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15123", "date": null, "keywords": "basket; heating; ignition; miscanthus; pellets; self; temperature; tests", "summary": "Although the critical self-heating conditions obtained for agromining pellets were systematically lower than those obtained for miscanthus, suggesting less stability, the difference was not significant enough to conclude that the presence of nickel promoted self-heating. Additional tests were performed at 190 \u00b0C with baskets of 6 cm size by mixing miscanthus (90 wt%) 89 and ashes (nickel-rich residues) from agromining pellets, collected after self-ignition.", "mime": "application/pdf"}, {"id": "cet-15124", "words": "4039", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15124", "date": null, "keywords": "crisis; improvisation; management; planning; plans; research; resilience; response", "summary": "Myopia during emergency improvisation\u202f: Lessons from a catastrophic wildfire. Exploring improvisation and planning through practices Understanding the interplay between plan implementation and improvisation remains a challenge, as the current state of knowledge does not fully capture this interaction.", "mime": "application/pdf"}, {"id": "cet-15125", "words": "3653", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15125", "date": null, "keywords": "accidents; assessment; damage; events; natech; resilience; scenarios", "summary": "However, especially in high-risk industries, where natural hazards may trigger technological accidents (Natech events), the development of quantitative resilience assessment tools poses significant challenges due to the complexity of incorporating Natech features as well as the long- term effects of such scenarios. In industrial areas where relevant quantities of hazardous materials are handled, natural hazards may trigger severe technological accidents, known as Natech events (Cruz et al., 2006).", "mime": "application/pdf"}, {"id": "cet-15126", "words": "2790", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15126", "date": null, "keywords": "assessment; change; climate; impact; potential; resilience; risk; scenario", "summary": "The definition of climate change scenarios starts by gathering data on potential climate conditions and their consequences on weather variables. Addressing climate change impacts often requires significant financial investments, extended planning periods, and lengthy implementation timelines.", "mime": "application/pdf"}, {"id": "cet-15127", "words": "4110", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15127", "date": null, "keywords": "figure; filling; flow; heat; level; mass; phase; pressure; relief; safety; scenario; sizing", "summary": "The implementation of (ISO 4126-10, 2024) for optimizing pressure relief systems yields significant benefits in sustainability, efficiency, safety, and cost-effectiveness for both greenfield and brownfield applications. [Guideline for pressure relief systems with safety valves].", "mime": "application/pdf"}, {"id": "cet-15128", "words": "3499", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15128", "date": null, "keywords": "analysis; dbn; engineering; factors; lngfv; maritime; resilience; safety; system; traffic; traffic resilience; vessel", "summary": "Starting from the mechanism of system resilience, the study constructs a resilience evolution framework for LNGFV based on the Triple Protection Mechanism (TPM). System resilience is a fundamental attribute of system safety, and studying resilience is a crucial path to comprehensively understanding the safety-related attributes of complex systems(Wang et al. 2023).", "mime": "application/pdf"}, {"id": "cet-15129", "words": "3426", "extension": ".pdf", "flesch": "21", "author": null, "title": "cet-15129", "date": null, "keywords": "approach; innovation; management; optimization; pandemic; performance; process; resilience; safety", "summary": "Following the reasoning of Duchek (2020), Organizational Resilience (OR) is the ability of an organization to anticipate, prepare for, respond, and adapt to incremental changes and sudden disruptions to survive and prosper. In an era of increasing uncertainty and rapid change, organizational resilience has become a critical factor for long-term success and sustainability.", "mime": "application/pdf"}, {"id": "cet-15130", "words": "3131", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15130", "date": null, "keywords": "activities; areas; assessment; events; flood; index; land; lin; risk", "summary": "The results of the case study application confirm that LIN risk assessment requires taking into account not only Seveso plants, as in the case of Natech accidents, but also specific categories of industrial activities (i.e., Seveso., IPPC-IED, WWTPs, and CSs). Moreover, these results corroborated that the extension and location of flood-prone areas and land usage play a significant role in the assessment of LIN risk.", "mime": "application/pdf"}, {"id": "cet-15131", "words": "3986", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-15131", "date": null, "keywords": "air; blast; charge; cord; detonation; explosives; figure; mass; source", "summary": "Experimental Campaign 2 : Measurement of detonation cord air blast On May 24, 2024, the second experiment was executed. An anti \u2013 tank mine made of steel and a 250 g cartridge wrapped with detonation cord were added to initiate the explosion (Figure 1b).", "mime": "application/pdf"}, {"id": "cet-15132", "words": "3159", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15132", "date": null, "keywords": "assessment; engineering; figure; hydrogen; refueling; resilience; safety; state; station; system; time", "summary": "Future research will focus on improving the DBN model by incorporating more complex and diverse influencing factors, making the assessment results of hydrogen refueling station resilience more accurate and reliable. Absorption, adaptation, restoration, learning capacity and disruption are key elements in measuring system resilience.", "mime": "application/pdf"}, {"id": "cet-15133", "words": "3501", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15133", "date": null, "keywords": "control; function; industry; power; safety; smr; steam; sto; systems; torque", "summary": "Historically, safety systems in SMR relied on mechanical devices like valves to manage hazards. However, for electrified reformers, safety interlock systems and reliability assessments remain underdeveloped, and clear procedures have yet to be defined.", "mime": "application/pdf"}, {"id": "cet-15134", "words": "4133", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15134", "date": null, "keywords": "et al; fire; leakage; r290; rachp; refrigerant; rif; risk; scenarios; units", "summary": "Quantitative integration of fire risk with life cycle analysis of building: The case of thermal insulation, Journal of Building Engineering 160, 683\u2013694. Data shows that 2-6% of building fires impact external facades, with a certain variability depending on the region (White et al., 2015), as reported in Table 4.", "mime": "application/pdf"}, {"id": "cet-15135", "words": "3642", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15135", "date": null, "keywords": "analysis; dfta; event; failure; fault; hydrogen; msfta; system", "summary": "FTA helps understand how individual component failures can lead to system failures. This limitation has led to challenges in prioritizing critical failures and in managing redundancy and dependency effectively (Huang & Chang, 2007).TFTA typically uses fixed probabilities to represent the likelihood of component failures, assuming these probabilities remain constant over time.", "mime": "application/pdf"}, {"id": "cet-15136", "words": "3125", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15136", "date": null, "keywords": "escalation; failure; hydrogen; model; risk; safety; systems; vessel", "summary": "Figure 2: System Dynamics model for dynamic hydrogen risk assessment 3.3 Holistic dynamic hydrogen risk assessment (Stage 3) Escalation event rates are defined for both direct and delayed ignition pathways, further highlighting the risks of failure propagation through interconnected systems.", "mime": "application/pdf"}, {"id": "cet-15137", "words": "4447", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15137", "date": null, "keywords": "assemblies; directive; equipment; european; ped; pressure; pressure equipment; reactor; use", "summary": "PED Directive shall apply to the design, manufacture and conformity assessment of pressure equipment and assemblies with a maximum allowable pressure, which is greater than 0,5 barg. State of the art of the relevant legislation 2.1 Design, manufacture and certification of pressure equipment and assemblies: European Product Directive PED (Directive 2014/68/EU)", "mime": "application/pdf"}, {"id": "cet-15138", "words": "3905", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15138", "date": null, "keywords": "concentration; cross; data; flow; jet; maximum; model; release; trajectory", "summary": "Vertical jet releases in a crossflow show enhanced mixing when the vertical jet is bent over due to the presence of the atmospheric boundary layer. Therefore, also the development of these main lateral vortices is taken into account in the dispersion modelling for vertical jet releases.", "mime": "application/pdf"}, {"id": "cet-15139", "words": "3344", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15139", "date": null, "keywords": "calorimeter; cryogenic; figure; fire; heat; tanks; temperature; time; transfer", "summary": "Relevant fires that could thermally load a tank come from pool fires of fuel or operating materials that leak out and form flammable pools under vehicles, tire fires triggered by warm brakes or burning pools, fires of vehicle components, such as the carbines of an HGV, or transportation goods that may represent flammable fluids or solids (Studiengesellschaft Stahlanwendung, 1995). In this context, accidents involving collisions, fires, and their combination on the road are likely and can cause exceptional stresses on the tank and its insulation system, ultimately leading to tank failure (Vollmacher, 2018; Konersmann et al. 2014).", "mime": "application/pdf"}, {"id": "cet-15140", "words": "3446", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15140", "date": null, "keywords": "air; condensate; container; lh2; test; vol%", "summary": "O2 concentrations begin to fall to a minimum of 10.5 vol% and N2 concentrations rise to 88 vol%. At 8,800 s, O2 concentrations begin to increase, to a maximum of 29 vol% at 9,600 s, which indicates that the condensate has become enriched with O2 and is now evaporating and causing O2 concentrations at the vent to rise.", "mime": "application/pdf"}, {"id": "cet-15283", "words": "3912", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15283", "date": null, "keywords": "biomass; chlorella; growth; medium; microalgae; vulgaris; wastewater", "summary": "C. vulgaris growth and pH evolution, (A) in BBM+C, (B) in PM. Table 2: Results of the remediation of potato wastewater medium by C. vulgaris.", "mime": "application/pdf"}, {"id": "cet-15284", "words": "4024", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15284", "date": null, "keywords": "anaerobic; cod; effluent; et al; industry; semiconductor; treatment; wastewater", "summary": "Otero-Gonz\u00e1lez, L., Field, J. A., & Sierra-Alvarez, R., 2014, Inhibition of anaerobic wastewater treatment after long-term exposure to low levels of CuO nanoparticles, Water Research, 58, 160\u2013168. Lv, J., Ni, Q., Dong, J., Ou, C., Cao, Y., Gan, J., & Xiao, F., 2023, Effects of influent organic load on TMAH (tetramethylammonium hydroxide) wastewater treatment by anaerobic process, Journal of Environmental Chemical Engineering, 11(2), 109315.", "mime": "application/pdf"}, {"id": "cet-15285", "words": "3357", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15285", "date": null, "keywords": "biomass; co2; energy; microalgae; oil; process; production", "summary": "It has been reported 207 that nitrogen, oxygen, and phosphorus depletion can increase oil production in Parachorella sp. (Mahmood et al., 2022) The oil content of microalgae (20% - 50%) (Escobedo & Calder\u00f3n, 2021; Johnson, 2012) is higher than that of other oil sources, producing between 15 and 300 times more oil for biodiesel production than traditional crops per surface area (Saifullah et al., 2014; Johnson, 2012).", "mime": "application/pdf"}, {"id": "cet-15286", "words": "3670", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15286", "date": null, "keywords": "activation; biomass; catalyst; degradation; energy; min; waste", "summary": "In addition, sensitivity analysis can identify critical parameters that significantly affect the performance of zeolite catalysts. The use of such catalysts significantly impacts the entire thermochemical recycling process.", "mime": "application/pdf"}, {"id": "cet-15287", "words": "3391", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15287", "date": null, "keywords": "biochar; c o; capacity; co2; heat; impregnation; treatment", "summary": "g a d s o rb e n t) 25\u00b0C impregnation 25\u00b0C imp., 400\u00b0C heat treatment 25\u00b0C imp., 600\u00b0C heat treatment 80\u00b0C impregnation 80\u00b0C imp., 400\u00b0C heat treatment 80\u00b0C imp., 600\u00b0C heat treatment b 221 References Dissanayake P.D., You S., Igalavithana A.D., Xia Y., Bhatnagar A., Gupta S., Kua H.W., Kim S., Kwon J.H., Tsang D.C.W., Ok Y.S., 2020, Biochar-based adsorbents for carbon dioxide capture: A critical review, Renewable and Sustainable Energy Reviews, 119, 109582 Guo S., Li Y., Wang Y., Wang L., Sun Y., Liu L., 2022, Recent advances in biochar-based adsorbents for CO2 capture, Carbon Capture Science & Technology, 4, 100059 Miskolczi N., Gao N., Quan C., Laszlo A.T., 2025, CO2 reduction by chars obtained by pyrolysis of real wastes: Low temperature adsorption and high temperature CO2 capture, Carbon Capture Science & Technology, 14, 100332 Miskolczi N., Csutoras B., 2024, Thermo-catalytic pyrolysis of sewage sludge and techno-economic analysis: The effect of synthetic zeolites and natural sourced catalysts, Bioresource Technology, 400, 130676 Robert Monroe, 2024, Daily Measurements, Keeling Curve History Martina Igini, 2024, Atmospheric CO2 Jump in 2024 off Track With Trajectory Needed to Meet 1.5 Goal, Met Office Says Rebecca Lindsey, 2024, Climate Change: Atmospheric Carbon Dioxide Xue Q., Xie S., Zhang T., 2022, Biochar production and modification for environmental improvement, Biochar in Agriculture for Achieving Sustainable Development Goals, 181-191 Yaumi A.L., Abu Bakar M.Z., Hameed B.H., 2017, Recent advances in functionalized composite solid materials for carbon dioxide capture, Energy, 124, 461-480 Shafeeyan M.S., Wan Daud W.M.A., Houshmand A., Shamiri A., 2010, A review on surface modification of activated carbon dioxide adsorption, Journal of Analytical and Applied Pyrolysis, 89, 143-151 Xu X., Kan Y., Zhao L., Cao X., Chemical transformation of CO2 during its capture by waste biomass derived biochars, Environmental Pollution, 213, 533-540 Kamran U., Park S-J., 2021, Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review, Journal of Cleaner Production, 290, 125776 222 332csaszar.pdf The Effect of Metal Impregnated Biochars in Carbon Dioxide Decrement It was found that adsorbents with 3.15-2.50 mm particle size have better CO2 adsorption capacity, than adsorbents with 0.80-0.40 mm particle size.", "mime": "application/pdf"}, {"id": "cet-15288", "words": "2987", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15288", "date": null, "keywords": "biomass; butanol; detoxification; fermentation; hydrolysates; production; scenario", "summary": "Ezeji, T., Qureshi, N., Blaschek, H. P., 2007, Butanol production from agricultural residues: Impact of degradation products on Clostridium beijerinckii growth and butanol fermentation, Biotechnology and Bioengineering, 97(6), 1460\u20131469. [A] [B] 226 Table 3: List of most cited publications on biomass hydrolysate production, detoxification, and fermentation strategies identified in scenario 4.", "mime": "application/pdf"}, {"id": "cet-15289", "words": "3341", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15289", "date": null, "keywords": "bioethanol; energy; panela; process; production; sugarcane", "summary": "Despite this, the volume of panela production in Colombia represents 14.9% of world statistics, making it one of the main agricultural activities of the national economy (Alarc\u00f3n et al., 2021). This project presents a feasible alternative for sugarcane production processes to be carried out in a more efficient way and with energy and therefore economic gains, using ASPEN PLUS.", "mime": "application/pdf"}, {"id": "cet-15290", "words": "3690", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15290", "date": null, "keywords": "co2; energy; ratio; reforming; sewgs", "summary": "The increase in yield is attributed to the favorability of the endothermic steam and dry reforming reactions at higher temperature in the tri-reformer. The effects of reforming temperature and percentage of recycled CO2 on process performance including overall H2 yield, energy efficiency, and H2/CO ratio of syngas generated from the reformers, will be analyzed and discussed.", "mime": "application/pdf"}, {"id": "cet-15291", "words": "3409", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15291", "date": null, "keywords": "biomass; growth; mars", "summary": "At the end of the growth phase, when the stationary one took place, the intracellular concentration of iron, evaluated through proper analyses and mass balances (data not shown) was lower than the minimum iron cell quota for C. vulgaris growth according to the literature (Concas et al., 2021). Eqs (1) to (3) derive from the application of the well-known Droop model to the concerned system (Concas et al., 2021) while Eq.", "mime": "application/pdf"}, {"id": "cet-15292", "words": "3376", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15292", "date": null, "keywords": "activation; alkaline; catalyst; figure; hydrogen; kaolin; reaction; steam; vol", "summary": "\ud835\udc42\ud835\udc3b\u2212 \u2192 \ud835\udc3b+ + \ud835\udc422\u2212; \ud835\udc3b+ + \ud835\udc42\ud835\udc3b\u2212 \u27f7 \ud835\udc3b2\ud835\udc42 Vahiddin et al (2022) reported that grinding time does not necessarily cause a reduction in sample particle size, but it does reduce the specific surface area and turns it into an amorphous material (Vahiddin et al., 2022). al, 2008, H. Cheng et al., 2012, E. Gasparini et al., 2013). \ud835\udc34\ud835\udc592\ud835\udc46\ud835\udc562\ud835\udc425(\ud835\udc42\ud835\udc3b)4 \u2192 \ud835\udc34\ud835\udc592\ud835\udc423 \u2219 2 \ud835\udc46\ud835\udc56\ud835\udc422 + 2 \ud835\udc3b2\ud835\udc42", "mime": "application/pdf"}, {"id": "cet-15293", "words": "3630", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15293", "date": null, "keywords": "biomass; concentration; energy; hydrolysis; libr; membrane; nacl; process; salt; separation; water", "summary": "Although higher concentrations generate greater quantities of products, some counterpoints are important, such as the increased costs, the difficulty in pumping the solution due to high biomass concentrations, a) b) b) 257 and the reduced efficiency of product separation as the biomass volume increases. Some studies still adopt this simplification to model biomass gasification processes.", "mime": "application/pdf"}, {"id": "cet-15294", "words": "4139", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15294", "date": null, "keywords": "batch; bicarbonate; biomass; concentration; cultivation; growth; l-1", "summary": "Control culture (5 g L-1) reached a pH of 9.75 at stationary phase, while at higher bicarbonate concentrations the final value established at 9.47. 3. Results and Discussion 3.1 Effect of bicarbonate concentration on microalgae growth Three different concentrations of sodium bicarbonate (1, 2.5 and 5 g L-1) were supplied at the beginning of the batch growth to investigate how performances of the selected strains were affected.", "mime": "application/pdf"}, {"id": "cet-15295", "words": "3305", "extension": ".pdf", "flesch": "27", "author": null, "title": "cet-15295", "date": null, "keywords": "cellulose; cps; energy; hydrolysis; recovery; treatment; wastewater", "summary": "Overall, CPS hydrolysis enhances carbon recovery in WWTPs, reducing reliance on external carbon sources. These results support the potential for mesophilic hydrolysis (38\u00b0C) as an energy-efficient approach, as it offers high cellulose degradation without the excessive energy demand associated with thermophilic (\u226550\u00b0C) conditions.", "mime": "application/pdf"}, {"id": "cet-15296", "words": "3910", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15296", "date": null, "keywords": "biosurfactant; oil; pantoea; production; surface; tension; water", "summary": "Higher yield with cheaper raw materials, noteworthy stress tolerance of biosurfactant toward pH and salt, and nontoxic effects against marine and terrestrial indicators revealed its potential for application in bioremediation, as the removal of hydrocarbons (petroleum, diesel, kerosene, and motor oil) adsorbed in sand reached values higher than 87%. Biosurfactants have many biotechnological applications in areas such as dairy, food, beverage, cosmetics, detergent, textile, paint, mining, petroleum, paper pulp, and pharmaceutical industries.", "mime": "application/pdf"}, {"id": "cet-15297", "words": "3965", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15297", "date": null, "keywords": "analysis; angle; data; precipitation; radar; reflectivity; stations; values", "summary": "Precipitation data measured by the stations localise precipitation in a timely manner, so it would be optimal to use additional sensors to those established by IDIGER to perform statistical validations and comparisons of precipitation and reflectivity. For the hours of 19:34, 19:40, 19:46, 19:52, 19:58, 20:05, 20:11 and 20:17; accumulated precipitation values greater than zero were recorded for more than 20 IDIGER stations, indicating that, for those precipitation events, both radars and stations were constantly recording the event that caused emergencies in the city.", "mime": "application/pdf"}, {"id": "cet-15298", "words": "3387", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15298", "date": null, "keywords": "capture; co2; concentrations; co\u2082; feed; gas; membrane; separation", "summary": "These findings demonstrate that the improved performance of the membrane at high CO\u2082 %vol feed concentrations is primarily due to enhanced permeability, though selectivity may be compromised at extreme levels of CO2 in the multicomponent feed gas. Figures 4a and 4b illustrate the effects of feed CO\u2082 concentration on CO\u2082 recovery, retention coefficient, stage cut, and selectivity in a membrane system.", "mime": "application/pdf"}, {"id": "cet-15299", "words": "3426", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15299", "date": null, "keywords": "1,00; 2,00 2,00; 4,00; 4,00 4,00; activities; mompox; tourism; water", "summary": "Through the evaluation of environmental impacts, it is concluded that the most affected component is the soil resource due to various tourist activities that result in the generation of plastic waste and the deterioration of the soil due to the agglomeration of plastic in different areas of the municipality. It reflects a strong consensus in favor of promoting sustainable tourism activities in Mompox, with 54.47% of respondents expressing their full agreement, especially in the 25-40 age group with 27.20%.", "mime": "application/pdf"}, {"id": "cet-15300", "words": "4028", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15300", "date": null, "keywords": "absorption; co2; column; flowrate; flue; flue gas; gas; pilot; pilot plant; plant", "summary": "4.1.2 Analysis of the fluid dynamics The analysis of the fluid dynamics of the columns for the pilot plant with an absorption column diameter equal to 0.55 m has been carried out in order to determine the operating range of flue gas flowrate without critical issues in fluid dynamics and the related energy consumptions. [m] 0.3937 0.3937 0.28 0.21 Packing type Norton Pall 3.5\u201d Mellapak 250X Mellapak 250X Mellapak 250X 4.2.2 Analysis of the fluid dynamics The pilot plant with the absorption column with a diameter of ~ 0.40 m can operate, without critical issues in the fluid dynamics, in range of flue gas flowrate between -1 % and +5 % compared to the base case flowrate.", "mime": "application/pdf"}, {"id": "cet-15301", "words": "3137", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15301", "date": null, "keywords": "discharge; mixing; parameters; quality; river; treatment; wastewater; water; zone", "summary": "The Yuracyacu River, located in the El\u00edas Soplin Vargas district, is an emblematic case where untreated or insufficiently treated wastewater compromises water quality, impacting downstream users and aquatic ecosystems. These EQS not only act as benchmarks for assessing water quality but also serve as points of international comparison.", "mime": "application/pdf"}, {"id": "cet-15302", "words": "3520", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15302", "date": null, "keywords": "adsorption; aerogels; cellulose; co2; drying; dye; dyes; figure; mcc; removal; water", "summary": "Srasri K., Thongroj M., Chaijiraaree P., Thiangtham S., Manuspiya H., Pisitsak P., Ummartyotin S., 2018, Recovery potential of cellulose fiber from newspaper waste: an approach on magnetic cellulose aerogel for dye adsorption material, International Journal of Biological Macromolecules, 119, 662-668. Also molecules steric hindrance plays a role in dye uptake, leading to the conclusion that linear dyes adsorption is less favored with respect to other kinds of molecules.", "mime": "application/pdf"}, {"id": "cet-15303", "words": "4309", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15303", "date": null, "keywords": "carbon; co2; emissions; energy; fuels; mitigation; process; production; products; strategies", "summary": "Accepted: 24 May 2025 Please cite this article as: Mawassi G., Di Pretoro A., Montastruc L., 2025, Accounting for Dynamics in Ranking CO2 Emissions Mitigation Strategies, Chemical Engineering Transactions, 117, 313-318 DOI:10.3303/CET25117053 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 Accounting for Dynamics in Ranking CO2 Emissions Mitigation Strategies Ghida Mawassi, Alessandro Di Pretoro*, Ludovic Montastruc Laboratoire de G\u00e9nie Chimique, Universit\u00e9 de Toulouse, CNRS/INP/UPS, Toulouse, France alessandro.dipretoro@ensiacet.fr The characteristic topic of the past decade research in the fields of chemical and energy industries can be identified in the continuous investigation of technological strategies aimed at the mitigation of CO2 emissions in order to meet the UE net-zero target by 2050. Starting with the carbon capture and storage (CCS), a method that relies on capturing CO2 emissions at the source and storing them underground or in other secure locations such as deep ocean reservoirs to prevent them from entering the atmosphere, it was divided in numerous subcategories.", "mime": "application/pdf"}, {"id": "cet-15305", "words": "4298", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15305", "date": null, "keywords": "decarbonization; dri; emissions; energy; italy; production; scenario; sector; steel; technologies", "summary": "1. Introduction Globally, steel production is steadily increasing, from 148 Mt in 1950 to 1,885 Mt in 2022.(worldsteel association, 2023), and, although at lower pace, it is expecting to further grow in the future thanks to the essential role that steel products play for numerous sectors (construction, automotive, machine and industrial equipment). From 2014 to 2023, employment in steel production (ATECO code 241) fell by 4.49%, while employment in transformation grew by 4.9% (ATECO 242) and 13.5% (ATECO 243), resulting in an overall increase of 1.63% driven by transformation activities, with a total workforce of approximately 68,500 employees.", "mime": "application/pdf"}, {"id": "cet-15306", "words": "3968", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15306", "date": null, "keywords": "batteries; cathode; mass; materials; metals; precipitation; precursor; process; solution", "summary": "Then the solution underwent co-precipitation process. SEM images for the precursor obtained from spent Li-ion batteries after co-precipitation process.", "mime": "application/pdf"}, {"id": "cet-15307", "words": "2864", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15307", "date": null, "keywords": "acetate; char; figure; iron; psw; pyrolysis; waste; yield", "summary": "This experimental work investigates the effects of adding iron acetate to plastic solid waste prior to their pyrolysis and its role in the final properties of the produced pyro-char. Pyrolysis of four samples with different concentrations of iron acetate (0, 5, 10, and 20 % w/w dry basis) was carried at 25 \u00b0C min-1 heating rate to 600 \u00b0C holding temperature for 2 hours.", "mime": "application/pdf"}, {"id": "cet-15308", "words": "3813", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15308", "date": null, "keywords": "assessment; aviation; biomass; colombia; potential; production; saf; sustainability", "summary": "The LCA illustrates that despite efforts to reduce GHG emissions, strategies to enhance sustainability in SAF production processes in Colombia are imperative. A life cycle assessment (LCA) was developed for SAF production in Colombia using SimaPro\u00ae software.", "mime": "application/pdf"}, {"id": "cet-15309", "words": "3203", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15309", "date": null, "keywords": "beekeepers; beekeeping; development; mar\u00eda; montes; practices; region; resilience; risks", "summary": "The promotion of beekeeping products, the promotion of teamwork ergonomics, and the establishment of robust regulations for beekeeping practices and products are critical steps in improving the resilience and competitiveness of the sector. The searches were conducted during March, April, and May 2024, focusing on risks associated with beekeeping practices.", "mime": "application/pdf"}, {"id": "cet-15310", "words": "3871", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15310", "date": null, "keywords": "acid; beverages; culture; fermentation; hawthorn; pollen; products; yam", "summary": "The objective of this research was to evaluate the percentage of compliance in the bromatological, and microbiological parameters of fermented lactic beverages based on yam (Dioscorea rotundata), honey, and pollen as a strategy for the valorization of beekeeping by-products, taking into account the safety of the production process. One of the most widely used methods for obtaining new products is lactic acid fermentation.", "mime": "application/pdf"}, {"id": "cet-15311", "words": "3087", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15311", "date": null, "keywords": "degradation; degussa; dye; light; nanoparticles; tio2", "summary": "In this investigation, 4 g of TiO2 nanoparticles and 1.5 g of NaBH4 were thoroughly mixed, ground and subsequently placed in a porcelain boat and calcined at 300 \u2103 for 3 h in a N2 rich environment. This examination (Figure 3) revealed a relatively uniform size distribution of granular formations characteristic of TiO2 nanoparticles.", "mime": "application/pdf"}, {"id": "cet-15312", "words": "3485", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15312", "date": null, "keywords": "basalt; carbon; dissolution; etendeka; fluid; paran\u00e1; province; sample; volcanic", "summary": "Accepted: 15 May 2025 Please cite this article as: Silva K.C., Cury L.F., Luz Junior L.F.L., 2025, Basalt Dissolution Reaction of the Paran\u00e1-etendeka Volcanic Province and Its Potential to Sequester Carbon Dioxide, Chemical Engineering Transactions, 117, 367-372 DOI:10.3303/CET25117062 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 Basalt Dissolution Reaction of The Paran\u00e1-Etendeka Volcanic Province and Its Potential to Sequester Carbon Dioxide Klebson C. Silvaa*, Leonardo F. Curyb, Luiz F. L. Luz J\u00faniora aFederal University of Paran\u00e1, Department of Chemical Engineering, Curitiba, PR, Brazil bFederal University of Paran\u00e1, iLAMIR Institute, 81531-980, Curitiba, PR, Brazil klebsonsilva@ufpr.br Volcanic rocks have demonstrated high efficiency in reacting with carbonated fluids and mineralizing CO2, as shown in experimental studies and pilot projects. The Paran\u00e1-Etendeka Magmatic Province represents a promising site for carbon storage due to its extensive deposits of volcanic rocks and abundant water resources.", "mime": "application/pdf"}, {"id": "cet-15313", "words": "3396", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15313", "date": null, "keywords": "energy; environmental; pei; process; production; pvc; rate; total", "summary": "This work focuses on the production of PVC (polyvinyl chloride), transforming vinyl chloride monomer (VCM), a highly polluting and hazardous raw material, into a material with lower environmental impacts. This comparison highlights how energy integration allows for an effective reduction of environmental impact, by optimizing energy use and recycling critical raw materials.", "mime": "application/pdf"}, {"id": "cet-15314", "words": "3890", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15314", "date": null, "keywords": "co2; data; et al; pressure; solubility; solvent; \u00b0 c", "summary": "In particular, for a concentration of MEA in the solvent equal to 30% wt., Jou et al. (1995) collected experimental data of CO2 partial pressure at 0\u00b0C, 25\u00b0C, 40\u00b0C, 60\u00b0C, 80\u00b0C, 100\u00b0C, 120\u00b0C and 150\u00b0C, Ma'mun et al. (2005) at 120\u00b0C, Kadiwala et al. (2010) at 40\u00b0C, Aronu et al. (2011) at 40\u00b0C, 60\u00b0C and 80\u00b0C, Dugas and Rochelle (2011) at 40\u00b0C, 60\u00b0C, 80\u00b0C and 100\u00b0C, Xu and Rochelle (2011) from 100\u00b0C to 150\u00b0C, Arshad et al. (2014a) and Arshad et al. (2014b) at 40\u00b0C, 80\u00b0C and 120\u00b0C, Idris et al. (2015) at 40\u00b0C and Wanderley et al. (2020) at 40\u00b0C, 80\u00b0C and 120\u00b0C. In this work, the losses of the solvent in the vapor phase because of the operation of the vacuum pump and because of the operating temperature have been included in the calculation of the amount of liquid solvent at the equilibrium.", "mime": "application/pdf"}, {"id": "cet-15315", "words": "3926", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15315", "date": null, "keywords": "adsorbent; adsorption; bimetallic; carbon; chromium; cr(vi; graphene; oxide; solution", "summary": "Both parameters; adsorbent dosage and solution pH are important in determining adsorption potential. Both parameters; adsorbent dosage and solution pH are important in determining adsorption potential.", "mime": "application/pdf"}, {"id": "cet-15316", "words": "3108", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15316", "date": null, "keywords": "incineration; life; pfas; pyrolysis; sludge; treatment", "summary": "Pyrolysis treatment results in 26 % lower GWP impacts (70.8 kg CO2-eq per 1000 kg of input), 85 % lower MEP impacts (0.0065 kg N-eq per 1000 kg of input), and 91 % lower TETP impacts (216 kg 1,4-DBC-eq per 1000 kg of input) compared to incineration (96.2 kg CO2-eq, 0.0437 kg N-eq, and 2330 kg 1,4-DBC-eq per 1000 kg of input, respectively).The study highlights pyrolysis as a more eco-friendly and energy-efficient option for managing PFAS-rich waste, outperforming incineration in the considered environmental categories. Regarding the MEP, the total impact from pyrolysis treatment results in 0.0065 kg N-eq per 1000 kg of input, whereas incineration leads to 0.0437 kg N-eq per 1000 kg of input.", "mime": "application/pdf"}, {"id": "cet-15317", "words": "3686", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15317", "date": null, "keywords": "acid; batteries; des; earth; et al; extraction; metal; nimh; ree; rees; selectivity", "summary": "This study reports, for the first time, original results on metal extraction from NiMH black mass using choline chloride-lactic acid DES, compared to conventional acid leaching. 2.2 Regression analysis Empirical models were developed to identify the significant effects of the investigated factors (acid concentration, temperature, and time) on the output variables (metal extraction and selectivity) using JMP software.", "mime": "application/pdf"}, {"id": "cet-15318", "words": "3485", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15318", "date": null, "keywords": "biochar; fish; oil; pyrolysis; residence; uni; waste", "summary": "Conclusions This study focuses on optimising biochar production from the co-pyrolysis of fish and pruning waste (30% FW: 70% PW) for agricultural applications as a soil amendment and composting additive. Biochar production from cellulose under reductant atmosphere: Influence of the total pyrolysis time.", "mime": "application/pdf"}, {"id": "cet-15319", "words": "2558", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15319", "date": null, "keywords": "c4f7n; chemical; energy; et al; gas; hydrolysis; reaction", "summary": "411 Figure 2: Reaction path of C4F7N with (n)H20 water molecule relative to the energy of (-982,436603 a.u) Figure 3: Variation of Gibbs free energy of fluoronitrile hydrolysis reactions under the influence of temperature (K) 412 Temperature rises above ambient conditions during arcing in the circuit breaker; therefore, it should be considered to determine the free energy at a higher temperature. C3F10O (Xiao et al., 2017), NSCI (Zhen Guo, Cunyuan Zhao, David Lee Phillips, Evan G. Robertson, 2008), and aldehyde (Wang et al., 2018), molecules are also showing the same behaviour.", "mime": "application/pdf"}, {"id": "cet-15320", "words": "3542", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15320", "date": null, "keywords": "adsorption; bed; co2; gas; li4sio4; pellets; reactor; \ud835\udc36\ud835\udc36\ud835\udc422", "summary": "Conversely, increasing the bed height provides more adsorbent material available for CO2 adsorption reaction, enhancing the overall adsorption capacity and delaying the breakthrough occurrence, thus improving the CO2 removal efficiency. \ud835\udc37\ud835\udc52\ud835\udc53\ud835\udc53 and \ud835\udc58\u2032 depend on the reaction progress and include corrections to take into account the presence of a molten eutectic phase of Li2CO3/K2CO3 in the product layer and an initial nucleation stage of the reaction products, respectively, as found by the authors in a previous kinetic study of CO2 adsorption on doped Li4SiO4 (Stefanelli et al., 2025).", "mime": "application/pdf"}, {"id": "cet-15321", "words": "4130", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15321", "date": null, "keywords": "absorption; chemical; co2; cyrene; et al; hansen; nmp; solubility; solvent", "summary": "423 Table 3: Toxicological indices for of Cyrene and NMP Toxicological indices Unit Cyrene NMP Table 2: Comparison between the physical properties of Cyrene and NMP (SDS stands for Safety DataSheet) Physical property Unit Cyrene NMP Measured at Source Molecular weight [g/mol] 128.13 99.13 (SDS - Cyrene; SDS - NMP)", "mime": "application/pdf"}, {"id": "cet-15322", "words": "3649", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15322", "date": null, "keywords": "bacterium; chromium; days; hexavalent; pseudomonas; putida; reduction; sample; treatment; wastewater", "summary": "Another aspect to take into account is the pH, at 7, 14 and 21 days the lowest pH values were when there was less chromium reduction, but as the days passed the pH in the samples rose at the same time there was more chromium reduction; this verifies the influence on chromium reduction, so it can be said that at low pH Pseudomonas putida has a low capacity to reduce chromium VI (Khan et al., 2024). As a bioremediation technique for chromium (VI), there is the use of biomass in various forms, such as using municipal dried sludge as a permeable bio reactive barrier (Kholisa et al., 2022); also, with the use of Pseudomonas putida bacterium, which have already been evaluated with very promising results for the treatment of domestic wastewater, they have also been used for the treatment of wastewater contaminated with Cr (VI) with an efficiency of 98.6% in 26 days (Mendoza-Vela et al., 2022).", "mime": "application/pdf"}, {"id": "cet-15323", "words": "3222", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-15323", "date": null, "keywords": "biofilter; eisenia; foetida; parameters; products; treatment; wastewater; worms", "summary": "Table 2: Parameters of earthworm habitability conditions Control(days) Temperature (\u00b0C) Humidity (%) Hydrogen potential (pH) 0 (initial) 18 57.5 6.5 15 18 80.0 7.0 31 18 77.5 7.0 46 20 70.0 7.0 3.2 Physicochemical and microbiological parameters of treated wastewater in biofilter 1 The wastewater from the management and marketing of hydrobiological products after treatment in biofilter 1, which contained 250 g of Eisenia foetida worms, presented the levels of physicochemical and microbiological parameters shown in Table 3. Parameters No treatment Treatment time (days) 5 10 15 Electrical conductivity (\u03bcmho/cm) 8.43 7.44 7.9 3.46 Temperature (\u00b0C) 16.5 19.1 21.3 22.5 TSS (mg/L) 345 64.52 17.21 15.18 Color (PCU) 285 125 63.23 47.23 Turbidity (NTU) 146 140.67 104.67 36.07 pH 7.43 7.01 7.15 7.75 BOD5 (mg/L) 744 453 87.22 75.07 COD (mg/L) 1118 580 141.5 124.37 Oils and fats (mg/L) 87 21.05 15.14 11.06 Total Coliforms (NMP/100mL) 240000 1200 1200 1100 Thermotolerant coliforms (NMP/100 mL) 2500 1200 1100 1100 Organic matter (mg/L) 631 87.03 63.22 56.09 3.3 Physicochemical and microbiological parameters of treated wastewater in biofilter 2 Filter 2, with 500 g of worms, showed a level of reduction similar to filter 1, according to the results shown in Table 4, indicating that the efficiency does not depend relatively on the number of worms in the biofilter, the 435 most important thing is the good habitability of the biofilter related to humidity (Loro, 2018), temperature (De Lima Rodr\u00edguez et al., 2013) and pH (Paico, 2017).", "mime": "application/pdf"}, {"id": "cet-15324", "words": "3241", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15324", "date": null, "keywords": "carbonation; co2; magnesium; mg2; min; solids; tests", "summary": "Direct carbonation tests were carried out by using synthetic magnesium chloride solutions with a Mg2+ concentration of ~2.00 mol/L. Sodium hydroxide was the alkaline reactant. Materials and methods 2.1 Solutions Synthetic Mg2+-rich and NaOH solutions were employed in direct carbonation tests.", "mime": "application/pdf"}, {"id": "cet-15325", "words": "2557", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15325", "date": null, "keywords": "air; data; events; figure; fire; particulate; quality; wildfires", "summary": "Rome, Italy bDepartment of Computer Engineering, Modeling, Electronics and Systems, University of Calabria, Via P. Bucci, Cubo 44/a Rende, 87036 Arcavacata, Italy cResearch Department, Sense Square Srl, 84084 Salerno, Italy daniele.sofia@unical.it or danielesofia@sensesquare.eu Adverse events such as fires pose a significant threat to air quality in urban areas, with both immediate and long-term impacts on public health and the environment. In many regions, wildfires have become a recurring summer event, leading to devastating impacts on ecosystems, air quality, and human health, as well as significant economic costs related to firefighting efforts and property damage.", "mime": "application/pdf"}, {"id": "cet-15326", "words": "3202", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15326", "date": null, "keywords": "fermentation; ha-18; process; yam; yeast", "summary": "Table 2: Electronic tongue sensors and corresponding taste Sensors Taste Information from Relative Value Taste Information from CPA Value AAE Umami Richness CT0 Saltiness None CA0 Sourness None C00 Bitterness Aftertaste Bitterness AE1 Astringency Aftertaste Astringency 3. Results and discussion The composition of yam flour was moisture 12.9 g/100g, total solids 87.1 g/100g, total carbohydrates 81.8 g/100 g, total proteins 3.3 g/100 g. Electronic tongue analysis was performed as reported by the work of M. Laureati, S. Buratti, A. Bassoli, G. Borgonovo, 2010).", "mime": "application/pdf"}, {"id": "cet-15327", "words": "3525", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15327", "date": null, "keywords": "beans; cocoa; cocoa beans; drying; engineering; fermentation; fermenter; process; pulp; rotary", "summary": "Based on the calculated density of cocoa beans, which was 0.86 g/cm3 for non-fermented cocoa and 0.85 g/cm3 for fermented cocoa beans, and a mass of 15 kg, the volume that the cocoa beans will occupy was calculated. In 2016, Colombia produced 60,535 tons of cocoa beans.", "mime": "application/pdf"}, {"id": "cet-15328", "words": "3245", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15328", "date": null, "keywords": "assessment; cycle; energy; environmental; impact; lca; life; oil; production; prototype", "summary": "The traditional LCA methodology is applied across four stages: goal definition, input- output inventory, environmental impact assessment, and result analysis with suggestions for achieving further improvements. The LCIA phase translates system flows into environmental impact categories to assess potential effects, using reference flows from the LCI.", "mime": "application/pdf"}, {"id": "cet-15329", "words": "3103", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15329", "date": null, "keywords": "assessment; cycle; emissions; global; impact; life; plant; treatment; wastewater", "summary": "The first one includes a lot of environmental impacts like freshwater eutrophication, human toxicity, and global warming. This tool can be successfully applied to wastewater treatment plants, too.", "mime": "application/pdf"}, {"id": "cet-15330", "words": "3954", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15330", "date": null, "keywords": "carbon; co2; energy; industrial; processes; technologies; \u2206\ud835\udc3b298\ud835\udc3e; \ud835\udc36\ud835\udc42 \u2206\ud835\udc3b298\ud835\udc3e; \ud835\udc36\ud835\udc422", "summary": "To ensure that no potential technologies were overlooked, the scouting considered evaluating several keywords related to offshore technologies or their operative constraints: \u2022 Offshore / Coastal \u2022 Oilfield / Platform / Rig \u2022 Carbon Dioxide / CO2 / Carbon \u2022 CCU / Utilization / Conversion / Transformation / Feedstock / Reuse \u2022 Hydrogenation / Reduction / Carbonylation / Solidification \u2022 Low weight / Low pressure / Low temperature / At the industrial scale, only the dual-step carbonylation of CO2 has been implemented by companies such as Saudi Aramco and Mitsubishi (Al et al., 2022; Kobayashi et al., 2004).", "mime": "application/pdf"}, {"id": "cet-15331", "words": "3544", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15331", "date": null, "keywords": "ared; figure; l-1; pws; salinity; sbmbbr; treatment; water", "summary": "Conversely, biological treatments are among the most cost-effect and efficient technologies to deal with wastewaters. 5. Conclusions A novel treatment chain was developed and tested with real PWs, by coupling ARED and biological treatment.", "mime": "application/pdf"}, {"id": "cet-15332", "words": "3705", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15332", "date": null, "keywords": "adsorption; htc; hydrochar; methane; process; production; sewage; sludge", "summary": "In contrast to the HY-1 and HY-4 dosages, the dosages of 2 g and 5 g of hydrochar added to sewage sludge showed negative results as methane production compared to the control reactor. Figure 1: Cumulative methane production from AD of sewage sludge and hydrochar under mesophilic conditions 490 The increment of methane production when a certain amount of hydrochar was added, like for the HY-4 condition (which means 8 g added to the sludge), can be due to several mechanisms that occurred during the process.", "mime": "application/pdf"}, {"id": "cet-15333", "words": "3541", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15333", "date": null, "keywords": "catcher; collection; design; efficiency; fog; humidity; volume; water; wind", "summary": "In that sense, the research aimed to design and build a pentahedral-shaped fog catcher and evaluate its efficiency in capturing fog water compared to a traditional design. Here it can be seen that at low speeds the formation of fog is improved by replacement by new humid air instead of old humid air, but on the contrary, at high speeds it can affect the formation of fog (Imteaz, et al., 2011); However, experiences according to the scientific literature indicate that high wind speeds generally improve fog water collection because fast winds transport more fog droplets to the mesh and can be captured (Park, 2021).", "mime": "application/pdf"}, {"id": "cet-15334", "words": "3859", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15334", "date": null, "keywords": "capture; ch4; co2; dfms; methanation; production; step; time", "summary": "Figure 3: (a) Methane transient evolution at different methanation step duration for the R-N sample. Figure 4: (a) Methane transient evolution at different methanation step duration for the R-N-CZ sample.", "mime": "application/pdf"}, {"id": "cet-15335", "words": "4225", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15335", "date": null, "keywords": "ash; elements; management; material; recovery; samples; soil; volcanic; waste", "summary": "~3 g of VA sample were added to a digestion solution consisting of 21 ml of 37% HCl, 7 ml of 65% HNO3 and Milli-Q water in a 50 ml vessel. 3.2 Protocol for VA management The proposed protocol, outlined as a flowchart in Figure 1, begins with the collection and temporary storage of VA following an eruption.", "mime": "application/pdf"}, {"id": "cet-15336", "words": "3813", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15336", "date": null, "keywords": "fgd; hrd; power; station; system; wastewater; water; \ud835\udc36\ud835\udc5f \ud835\udc43\ud835\udc52", "summary": "However, the low pH of HRD water is causing corrosion in the mild steel piping used for water transfer, while its high solids content is leading to blockages and reduced wash flow. As shown in Figure 3(a), HRD water levels remained within safe operational limits, ensuring continued functionality.", "mime": "application/pdf"}, {"id": "cet-15337", "words": "4578", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15337", "date": null, "keywords": "activities; impacts; mining; paramo; samples; soil; water", "summary": "The matrices were determined, and water samples were taken from the collection points of the aqueducts and at points that presented mining activity, as well as soil samples; in total, six water samples and three soil samples were taken. I A C E F P R M C II V a lu e F lo ra P la n t c o v e rs a n d p la n t d iv e rs it y Removal of plant material - 8 4 4 4 4 1 1 4 4 2 56 S Excavation - 8 4 4 4 4 1 1 4 4 2 56 S Adaptation of the collection center and camp - 5 4 4 4 4 1 1 4 4 5 50 S Closure and Dismantling of Roads + 7 4 4 4 4 1 1 4 4 2 53 S Revegetation + 6 4 4 4 4 2 4 4 4 2 54 S F a u n a H a b it a t Removal of plant material - 8 4 4 2 2 2 1 4 4 2 53 S Adaptation of Collection Center + 4 2 4 1 1 2 1 4 4 1 34 M Camp - 4 2 4 2 2 2 1 4 1 1 33 M Redefinition and stabilization of collection centers - 4 2 4 2 2 2 1 4 2 1 34 M F a u n a D iv e rs it y a n d P o p u la ti o n Removal of plant material - 5 2 2 2 2 2 1 4 1 1 34 M Ore loading and transportation - 4 2 4 2 2 2 1 4 1 1 33 M Redefinition and stabilization of collection centers + 3 2 2 2 2 2 1 4 2 2 30 M Closure and dismantling of roads + 3 1 2 2 2 2 1 4 2 2 28 M Revegetation + 5 1 2 2 2 2 1 4 2 2 34 M S o c io -C u lt u ra l P o p u la ti o n , e m p lo y m e n t, a n d s o c ia l w e ll- b e in g Labor Hiring Track maintenance Transport; Installation of signage for risk areas Revegetation + 5 2 4 2 2 1 4 4 2 1 39 M + 5 2 2 2 2 1 1 4 2 2 35 M + 2 1 2 1 2 1 1 4 2 2 23 L + 1 1 4 2 1 1 1 4 4 1 23 L + 4 1 2 2 2 2 1 4 4 2 33 M Table 5: Results of the characterization of water samples Parameter Unit Water sample results Parameter Unit Water sample results M1 M2 M3 M4 M5 M6 M1 M2 M3 M4 M5 M6 Turbidity NTU 0.9 2.5 2.5 900 320 16 Nitrites mg/L 0.009 0.013 0.006 0.008 0.008 0.01 pH - 7.97 2.89 2.79 3.73 3.46 6.02 Nitrates mg/L 0.7 12 6.5 0.8 1.2 1.3 Conductivity \u00b5s/Cm 18.5 2120 2120 1561 1587 29.9 Ca mg/Lb 4.8 208 224 256 144 8 TDS mg/L 10 1091 1112 770 798 16 Mg mg/L 2.9 87.5 92.3 87.5 87.5 3.4 DO mg/La 6.42 6.84 6.79 6.65 6.87 7.03 Zn mg/L 0.217 1.094 0.871 0.243", "mime": "application/pdf"}, {"id": "cet-15338", "words": "3518", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15338", "date": null, "keywords": "analysis; error; mixtures; operations; product; safety; tank; unloading", "summary": "If the pressure build-up in the storage tank is significant, due to the high gas production resulting from the chemical reaction between incompatible products, it may cause the storage tank to rupture or burst pneumatically. Estimation of the probability based on the central unwanted event The British database FRED provides the frequency of occurrence of an accident linked to a mixture of incompatible products during an unloading operation as a function of the level of risk control implemented on the industrial site.", "mime": "application/pdf"}, {"id": "cet-15339", "words": "3484", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15339", "date": null, "keywords": "acid; co2; energy; formic; hydrogen; process; production; stage", "summary": "The authors tested the Ru-based heterogeneous catalytic complex in a continuous fashion and proposed a process flow diagram for formic acid synthesis stage. Common hydrogen carriers include liquid organic compounds (as toluene, dibenzyltoluene or N- ethylcarbazole), ammonia, methanol, formic acid and chemical hydrides.", "mime": "application/pdf"}, {"id": "cet-15340", "words": "3031", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15340", "date": null, "keywords": "bpu; bpu nanocomposite; distribution; figure; membranes; nanocomposite; silica; surface", "summary": "Furthermore, nitrogen adsorption-desorption analysis revealed that BPU membranes exhibited behavior characteristic of mesoporous materials, whereas commercial polypropylene demonstrated macroporous characteristics. These findings underscore the viability of BPU membranes as functional materials for specific applications requiring tailored porosity and surface properties.", "mime": "application/pdf"}, {"id": "cet-15341", "words": "3720", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15341", "date": null, "keywords": "biohydrogen; biomass; oil; production; reforming; system", "summary": "On this basis, one strategy for reducing H2 production costs can be to diversify the use of renewable electricity with the use of other renewable resources such as biowaste (e.g. biodegradable garden and park waste, food and kitchen waste 541 from households, restaurants, caterers and retail premises, and wastes from food processing plants) and biomass residues (e.g. lignocellulosic materials generated by the agricultural, forest, and agro-industrial sectors). The aim of this paper was to assess the technical and economic performance of H2 production by steam reforming (SR) of natural gas as well as three biohydrogen production systems using the levelized cost of H2 (LCOH) as a methodology.", "mime": "application/pdf"}, {"id": "cet-15342", "words": "3421", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15342", "date": null, "keywords": "dha; dust; equipment; ignition; probability; risk; sources", "summary": "Therefore, although the strength of this methodology lies in the quantification of risk, numerical values for ignition probability and risk reduction should only be considered as an indication of magnitude (Gritti et al., 2024). Ignition probability evaluation", "mime": "application/pdf"}, {"id": "cet-15343", "words": "3846", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15343", "date": null, "keywords": "data; escalation; figure; plant; process; risk; safety; security; time; tool", "summary": "Moreover, intentional attacks escalate quickly, so they are not well represented using conventional risk tools. Among those, intentional attacks are especially critical: their dynamic nature makes the use of conventional risk tools difficult and inaccurate.", "mime": "application/pdf"}, {"id": "cet-15344", "words": "3238", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15344", "date": null, "keywords": "avocado; biorefinery; cascade; hass; process; seed; usd", "summary": "(5) Table 1: Techno-economic factors for a cascade biorefinery from Hass avocado seed. Table 2: Capital costs for the cascade biorefinery from Hass avocado seed.", "mime": "application/pdf"}, {"id": "cet-15345", "words": "4501", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15345", "date": null, "keywords": "bog; export; flow; hydrogen; lh2; liquid; loading; mode; onshore; pressure; rate; storage; tank; terminal", "summary": "Dynamic simulation of the export terminal As boil-off gas generation during liquid hydrogen storage and carrier loading operations varies over time, a dynamic simulation is required for its analysis. Shet S.P., Priya S.S., Sudhakar K., Tahir M., 2021, A review on current trends in potential use of metal-organic framework for hydrogen storage, International Journal of Hydrogen Energy 46, 11782-11803.", "mime": "application/pdf"}, {"id": "cet-15346", "words": "4316", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15346", "date": null, "keywords": "hydrogen; production; ratio; reforming; temperature; urea; \u2206\ud835\udc3b25", "summary": "This phenomenon was likewise reported by Dupont et al. (2013), who attributed the increase in hydrogen yield at higher steam-to-carbon (S:C) ratios to Le Chatelier's Principle, where the additional H\u2082O shifted the equilibrium, promoting greater consumption of reactants and consequently enhancing hydrogen generation. Here, the effect of S:C ratio (kilomoles of water per kilomole of urea), temperature, and pressure on hydrogen production were evaluated.", "mime": "application/pdf"}, {"id": "cet-15347", "words": "3928", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15347", "date": null, "keywords": "analysis; efficiency; exergy; hydrocracking; hydrogen; process; stage; streams", "summary": "\ud835\udc3c = \ud835\udc38\ud835\udc4b\ud835\udc51\ud835\udc52\ud835\udc60\ud835\udc61\ud835\udc5f\ud835\udc5c\ud835\udc66\ud835\udc52\ud835\udc51 = \u2211 \ud835\udc38\ud835\udc4b\ud835\udc56\ud835\udc5b,\ud835\udc56\ud835\udc56 \u2212 \u2211 \ud835\udc38\ud835\udc4b\ud835\udc5d\ud835\udc5f\ud835\udc5c\ud835\udc51\ud835\udc62\ud835\udc50\ud835\udc61,\ud835\udc57\ud835\udc57 (10) Equation (11) defines exergy efficiency as the quotient between the useful exergy obtained in a process and the exergy supplied to it. Previous research has mainly focused on enhancing the energy efficiency of hydrocracking processes through heat integration methods, including pinch and exergy analyses.", "mime": "application/pdf"}, {"id": "cet-15348", "words": "3560", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15348", "date": null, "keywords": "chemical; gas; hydrocracking; hydrogen; index; isi; oil; process; safety; \ud835\udc3c\ud835\udc36\ud835\udc46; \ud835\udc3c\ud835\udc43\ud835\udc46", "summary": "Finally, it was concluded that the risks identified exceed the limits recommended by the regulations, which highlights the need to optimize process safety. Figure 3: Impact of process safety indices on the Inherent Safety Index (ISI).", "mime": "application/pdf"}, {"id": "cet-15349", "words": "3059", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15349", "date": null, "keywords": "analysis; chemical; efficiency; exergy; process; production; pvc; stage", "summary": "Exergy analysis is presented as a powerful tool to address this problem, by allowing a detailed evaluation of the thermodynamic performance of industrial systems (Gonz\u00e1lez-Delgado et al., 2022). In this way, exergy analysis not only identifies the sources of irreversibility in the process, but also quantifies energy inefficiencies, offering a clear diagnosis to implement improvements in the design and operation.", "mime": "application/pdf"}, {"id": "cet-15350", "words": "3452", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15350", "date": null, "keywords": "avocado; biorefinery; exergy; oil; peel; process; pulp; seed; stage; stream", "summary": "Therefore, exergy analyses are conducted to quantify energy losses and process efficiency, with the aim of proposing improvements that yield both energetic and economic benefits. Exergy losses at each stage of the process, along with overall exergetic performance indicators, were quantified to enhance energy efficiency and reduce environmental impacts.", "mime": "application/pdf"}, {"id": "cet-15351", "words": "3153", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15351", "date": null, "keywords": "absorption; cufe\u2082o\u2084; desalination; energy; graphene; oxide; rgo; solar; water", "summary": "Graphene, a highly conductive material, is widely used in solar desalination due to its excellent electrical conductivity and remarkable ability to absorb solar energy. Design and fabrication of porous three\u2010 dimensional Ag-doped reduced graphene oxide (3D Ag@ rGO) composite for interfacial solar desalination.", "mime": "application/pdf"}, {"id": "cet-15352", "words": "3529", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15352", "date": null, "keywords": "biodiesel; cost; ethanol; oil; process; production; rambutan; seed; set; waste", "summary": "The biodiesel production plant was simulated based on the preliminary study of rambutan seed oil extraction and biodiesel production from rambutan seed oil via supercritical ethanol. Because the unique fatty acid profile of rambutan seed oil generated a lower FAEE content and consumed a large amount of energy for distillation, the process's complexity reduced the EE-SET process's profitability.", "mime": "application/pdf"}, {"id": "cet-15353", "words": "2729", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15353", "date": null, "keywords": "coffee; fertilizer; germination; growth; larvae; pulp; soldier; treatment", "summary": "The treatments with the highest proportion of organic fertilizer presented the worst conditions, since the treatment (1) with 100% fertilizer did not present germination, the treatment (2) with 75% of frass content presented a germination of 93.33%, but its growth was slow, the treatment (3) with 50% of fertilizer composition presented the lowest germination, but it was the second treatment that had the best growth conditions, followed by the treatment (4) with 25% content, where the plants concluded the experimentation with a height of 68.22 mm, number of leaves 8 and stem diameter of 1.4 mm. In the study of (Fan et al., 2023), organic fertilizers provide fertility to the soil in the long term, contributing to agricultural production, and it is also considered that this is related to the improvement of soil conductivity.", "mime": "application/pdf"}, {"id": "cet-15354", "words": "3544", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-15354", "date": null, "keywords": "energy; fuel; generator; hres; load; optimization; power; sources; system; wind", "summary": "Hybrid renewable energy systems for sustainable rural development: Perspectives and challenges in energy systems modeling. Hybrid renewable energy systems for rural electrification in developing countries: A review on energy system models and spatial explicit modelling tools.", "mime": "application/pdf"}, {"id": "cet-15355", "words": "3752", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15355", "date": null, "keywords": "absorption; efficiency; flow; gas; jet; liquid; mass; pressure; rates; scrubber; transfer", "summary": "By integrating this trend with additional data on pressure drop and operating gas flow rates, a more complete understanding of scrubber performance can be achieved. In addition, gas flow through the open channel design minimizes pressure drop and prevents blockage, improving overall system performance.", "mime": "application/pdf"}, {"id": "cet-15356", "words": "3615", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15356", "date": null, "keywords": "emissions; energy; methanol; plastic; process; production; pyrolysis; reactor; syngas; waste", "summary": "Revised: 7 April 2025; Accepted: 10 May 2025 Please cite this article as: Guastaferro M., Baglioni F., Marchetti L., Tognotti L., Nicolella C., 2025, Renewable Methanol Production from Polyolefin Waste Via Pyrolysis: Process Simulation and GHG Emissions Evaluation , Chemical Engineering Transactions, 117, 631-636 DOI:10.3303/CET25117106 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 Renewable Methanol Production from Polyolefin Waste Via Pyrolysis: Process Simulation and GHG Emissions Evaluation Mariangela Guastaferro*, Federico Baglioni, Letizia Marchetti, Leonardo Tognotti, Cristiano Nicolella University of Pisa, Department of Civil and Industrial Engineering, Largo Lucio Lazzarino 2, 56126 Pisa (Italy) mariangela.guastaferro@unipi.it This study presents an integrated process for the valorization of plastic solid waste using a thermal pyrolysis stage followed by a steam reforming system, focusing on energy recovery and methanol production. The gas composition profile exhibited a favorable (H\u2082 - CO)/(CO + CO\u2082) ratio of 2.06 for plastic waste, further enhancing methanol production.", "mime": "application/pdf"}, {"id": "cet-15357", "words": "3900", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15357", "date": null, "keywords": "daily; demand; energy; heat; heating; solar; storage; temperature; water", "summary": "The four main components of these systems are: solar thermal energy collectors, control system, energy storage tank and an auxiliary system for heat supply (Modi et al., 2023). Introduction Among the different types of solar thermal energy storage systems (STESS), the most widespread are those with low temperatures, used to supply hot water and/or heating.", "mime": "application/pdf"}, {"id": "cet-15358", "words": "3557", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15358", "date": null, "keywords": "aew; bar; cell; efficiency; energy; fuel; hydrogen; power; sofc", "summary": "Among various fuel cell types, solid oxide fuel cells (SOFCs) are distinguished by their high operating temperatures, which enable direct reforming of hydrocarbon-based fuels like methanol and natural gas. References Bendaikha-Touafek W., Touafek K., Serir L., 2007, Operation of a total energy system based on SOFC fuel cell, Proceedings of the 2IWH, Gharda\u00efa, Algeria.", "mime": "application/pdf"}, {"id": "cet-15359", "words": "3098", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15359", "date": null, "keywords": "accidental; analysis; fire; model; railway; risk; tram; tunnel", "summary": "The paper demonstrates TRAM-R2's application through case studies, highlighting its potential for quantitative risk assessment in railway tunnels, facilitating comparison with regulatory criteria. Stakeholders have intensified safety scrutiny, leading to the formulation of new standards and recommendations (2008/163/EC, in Italy D.M. 2005/10/28 on Safety in railway tunnels).", "mime": "application/pdf"}, {"id": "cet-15360", "words": "2816", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15360", "date": null, "keywords": "concentration; degradation; particle; rate; tio2", "summary": "Kobayashi, D., Honma, C., Suzuki, A., Takahashi, T., Matsumoto, H., Kuroda, C., Otake, K., Shono, A., 2012, Comparison of ultrasonic degradation rates constants of methylene blue at 22.8 kHz, 127 kHz, and 490 kHz, Ultrasonics Sonochemistry, 19, 745-749. Sekiguchi and Saita (2001) have also investigated the effect of alumina particle addition on ultrasonic degradation of organic materials.", "mime": "application/pdf"}, {"id": "cet-15361", "words": "4247", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15361", "date": null, "keywords": "case; cracking; gas; gasoline; material; oil; steam", "summary": "The hydrogen content of the gas product is higher in the cases of PE Gasoline and PE Gas oil raw material than standard fuels. However, at 850\u00b0C by PE Gas oil raw material can be generated the highest concentration of ethylene (39.4V/V%).", "mime": "application/pdf"}, {"id": "cet-15362", "words": "3505", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15362", "date": null, "keywords": "batteries; battery; cell; current; heat; ion; lithium; temperature", "summary": "Thermal runaway mechanism of lithium ion battery for electric vehicles: A review. Lithium- ion batteries are a type of secondary battery that is usually used for portable electronic devices and electric cars, and every day they are getting more popular for use in various industries.", "mime": "application/pdf"}, {"id": "cet-15363", "words": "3153", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15363", "date": null, "keywords": "carbon; doi; efficiency; emissions; energy; footprint; implementation; iso; power; sustainability", "summary": "Improving energy efficiency in industries is crucial to reduce energy consumption and CO2 emissions (Man et al., 2020), thus contributing to environmental and economic sustainability (Feuillet et al., 2022). The implementation of ISO 50001 provides a framework for energy management that helps organizations improve their energy efficiency (ISO 50001, 2018).", "mime": "application/pdf"}, {"id": "cet-15364", "words": "3315", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-15364", "date": null, "keywords": "catalyst; gasification; s-1; s-2; s-3; s-4; s-5; steam; waste", "summary": "680 Table 1: The main results of TG analyses of rubber samples Without catalyst With catalyst S-1 S-2 S-3 S-4 S-5 S-1 S-2 S-3 S-4 S-5 1st step However, there was no significant difference among the syngas yield from different pre-treatment of rubber samples.", "mime": "application/pdf"}, {"id": "cet-15365", "words": "2946", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15365", "date": null, "keywords": "dust; equipment; explosion; ignition; pressure; protection; risks; severity; table; zone", "summary": "karima.bitchikh@g.enp.edu.dz Many industries, such as coal, food, paper, metals, plastics, etc\u2026, are exposed to the risk of dust explosions due to the specific characteristics of the powders handled. To manage these risks, it is essential to understand the parameters associated with dust explosions, to identify the areas where explosive powder clouds can form under normal and abnormal conditions, and finally to identify potential sources of ignition.", "mime": "application/pdf"}, {"id": "cet-15366", "words": "3885", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15366", "date": null, "keywords": "batteries; electrolyte; ion; lithium; process; production; risk; safety; sodium", "summary": "Cai X., Yue Y., Yi Z., Liu J., Sheng Y., Lu Y., 2024, Challenges and industrial perspectives on the development of sodium ion batteries, Nano Energy, 129, 110052-110070. Furthermore, a more accurate knowledge of battery life cycles allows identifying areas where further research and investment are needed.", "mime": "application/pdf"}, {"id": "cet-15367", "words": "4145", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15367", "date": null, "keywords": "acid; chemical; formation; gas; hydrogen; peroxide; reactions; risk; safety; scenario; siaap; treatment; wastewater", "summary": "By analysing accidental chemical reactions and historical incidents, this study aims to develop a structured hazard classification tool to support risk assessment, storage optimization and safer handling of chemical reagents. Van Nostrand Reinhold Company Inc. Library of congress Catalog Card Number 87-2084 ISBN 0-442-28208-7 Margossian N., 2010, Treating chemical risk, risk and hazard science, LAVOISIER, Paris, France (in French)", "mime": "application/pdf"}, {"id": "cet-15368", "words": "3499", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15368", "date": null, "keywords": "carbon; cathodic; co2; conditions; copper; electrodeposition; electrodes; paper; potential; zinc", "summary": "To this purpose, electrodepositions under galvanostatic and potentiostatic conditions were separately carried out on carbon paper and copper foil. We analyze how deposition parameters and different substrates (carbon paper, copper foil) can impact the electrode morphology and evaluate the catalytic activity of the fabricated foam electrodes.", "mime": "application/pdf"}, {"id": "cet-15369", "words": "3412", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15369", "date": null, "keywords": "alkaline; alloy; cell; electrodes; hydrogen; nickel; nws; sheet; water", "summary": "Through this method, we have fabricated Ni alloy electrodes NWs that have a very 709 high surface area and good catalytic performance (Carbone et al., 2023). In this scenario, Ni sheet electrodes and Ni nanostructured functionalized with Fe and P for kinetically enhancing HER and OER were prepared.", "mime": "application/pdf"}, {"id": "cet-15370", "words": "3041", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15370", "date": null, "keywords": "airway; aunps; detection; electrode; h2o2; pani; rgo; sensor", "summary": "The electrode for H2O2 detection was modified with reduced graphene oxide and gold nanoparticles, while the pH electrode was modified with the conductive polymer Polyaniline. The electrode for H2O2 detection was enhanced with rGO (reduced graphene oxide) and AuNPs (gold nanoparticles) electrodeposition, while the pH electrode was modified with the conductive polymer PANI (Polyaniline).", "mime": "application/pdf"}, {"id": "cet-15371", "words": "3778", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15371", "date": null, "keywords": "acid; batteries; doi; leach; leaching; liquor; lithium; manganese; materials; metal; precipitation; precursors; solution", "summary": "Chelate formation can negatively affect metal precipitation and according to the experimental findings further depresses the precipitation of the most soluble metal, i.e. manganese. This solution can be used to precipitate metals into new chemicals or directly synthesize new cathodic materials through co- precipitation of mixed metals precursors of cathodes, the method used for industrial production of mixed cathodic materials from synthetic salt solutions (Dong and Koenig 2020).", "mime": "application/pdf"}, {"id": "cet-15372", "words": "4031", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15372", "date": null, "keywords": "co2; cuo; gas; materials; properties; ratio; reduction; reference", "summary": "Leonzio G., Hankin A., Shah N., 2024, CO2 electrochemical reduction: A state-of-the-art review with economic and environmental analyses, Chemical Engineering Research and Design, 208, 934-955. Sheng W., 2017, Electrochemical reduction of CO2 to synthesis gas with controlled CO/H2 ratios, Energy & Environmental Science, 10, 1180-1185.", "mime": "application/pdf"}, {"id": "cet-15373", "words": "4071", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15373", "date": null, "keywords": "al2o3; ammonia; cnts; fe2o3; figure; gas; nitrogen", "summary": "Among the various innovative approaches to ammonia production, there are electrocatalytic processes that exploit electrical energy to drive the reactions and can be perfectly integrated with the current energy transition, although the electrocatalysis remains far from industrial standards (Tavella et al., 2022). The N2 adsorbs on the catalyst surface and reacts with the protons diffusing from the proton- exchange membrane (Tavella et al., 2022).", "mime": "application/pdf"}, {"id": "cet-15374", "words": "3170", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15374", "date": null, "keywords": "cell; configuration; electrode; ethanol; gas; liquid; phase; photo", "summary": "Figures 4a, b, c and d show the Nyquist plots of EIS data with and without light irradiation, in liquid phase and in gas phase conditions. Note that in the GP configuration, an inert gas stream transported the ethanol vapour to the anode operating in gas phase.", "mime": "application/pdf"}, {"id": "cet-15375", "words": "3212", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-15375", "date": null, "keywords": "bagasse; compounds; concentrations; corrosion; extraction; extracts; inhibitors; potential; ppm; sugarcane", "summary": "By focusing on readily available agricultural waste as a source of corrosion inhibitors, this study offers a practical pathway toward reducing the environmental impact of corrosion protection while potentially decreasing costs associated with conventional inhibitors. All solutions show more negative potentials than the blank, indicating they would not act as corrosion inhibitors.", "mime": "application/pdf"}, {"id": "cet-15376", "words": "3630", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15376", "date": null, "keywords": "electric; leather; process; solution; tanning; time; \u2206\ud835\udc49\ud835\udc5d; \ud835\udc36\ud835\udc5d,\ud835\udc36\ud835\udc5f; \ud835\udc36\ud835\udc5f(\ud835\udc3c\ud835\udc3c\ud835\udc3c", "summary": "\u201cGiulio Natta\u201d, Politecnico di Milano, Piazza Leonardo de Vinci 32, 20133 Milan, Italy maurizio.masi@polimi.it Powertan is a disrupting new approach for leather tanning were the penetration inside the hide to be tanned is enhanced by the use of an externally applied electric field. Masi M., Magagnin L., Costa P.P, Costa L., 2013, Method for the conditioning of waste arising from the decommissioning of nuclear plants, WO2013168118. Masi M., Magagnin L., Rossi F., Gibertini E., Rovere G., 2019, Chromium enhanced tanning leather, EP3527675.", "mime": "application/pdf"}, {"id": "cet-15377", "words": "3245", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15377", "date": null, "keywords": "graphene; issg; oxide; rgo; solar; steam; water", "summary": "Reduced graphene oxide aerogel with the dual-cross- linked framework for efficient solar steam evaporation. 2023).Among various solar absorber materials, carbon-based absorbers such as reduced graphene oxide (rGO) have gained attention for their superior photothermal properties (Jian et al., 2021).", "mime": "application/pdf"}, {"id": "cet-15378", "words": "3062", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15378", "date": null, "keywords": "cell; conditions; flow; iron; shear; stress; temperature", "summary": "50 cm Reactor A B A B Oven (a) (b) 764 A key feature of the RHT-ST is the increased thickness of the fins arranged radially on the lid (Figure 1b-A), enabling them to withstand high shear stresses resulting from the high compressive forces under investigation. The selection of sand, a material with dimensions close to those of coarse particles, ensures that the material does not deform during the compression phase, that weak interaction forces are negligible, and that there is a linear relationship between applied normal stresses and recorded shear stresses.", "mime": "application/pdf"}, {"id": "cet-15379", "words": "3508", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15379", "date": null, "keywords": "et al; explosion; liquid; metal; nanoparticles; nps; short; technique; wire", "summary": "As an alternative to all aforementioned chemical methods, physical methods have been proposed in NPs synthesis (Reverberi et al., 2022), and they differ from one another in the complexity and cost of the experimental setup. As a first rough classification, these methods can be divided in wet and liquid-assisted mechanosynthesis processes, according to whether a solvent is present during the comminution process (Reverberi et al., 2020).", "mime": "application/pdf"}, {"id": "cet-15380", "words": "3229", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15380", "date": null, "keywords": "bed; bubble; emulsion; fluidization; gas; mass; phase; transfer; velocity; voidage", "summary": "Hilligardt K., Werther J., 1987, Influence of temperature and properties of solids on the size and growth of bubbles in gas fluidized beds, Chemical Engineering & Technology, 10, 272\u2013280. Sh \u2013 Sherwood number, - U \u2013 superficial gas velocity, m/s Ub \u2013 bubble velocity, m/s Ue \u2013 emulsion phase velocity, m/s Umf \u2013 minimum fluidization velocity, m/s X \u2013 bubble-emulsion phase mass transfer index, - xCO \u2013 CO conversion, - \uf064 \u2013 bubble fraction, - \u03b5 \u2013 voidage, - \u03b5e \u2013 emulsion phase voidage, - \u03b5mf \u2013 voidage at minimum fluidization conditions, - \u03c1p \u2013 particle density, kg/m3 \ud835\udf19 \u2013 sphericity, - \u03c1p \u2013 particle density, kg/m3 Acknowledgments The authors gratefully acknowledge Mr. Antonio Cammarota for the set-up of the experimental apparatus, and Mr. Antonio Russo, University of Naples, for the support during the experimental campaign.", "mime": "application/pdf"}, {"id": "cet-15381", "words": "3004", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15381", "date": null, "keywords": "cell; charge; figure; friction; lid; metal; powder; shear", "summary": "Moreover, electric charge can be produced during the shear cell filling preparation process on the metal workpiece because of the contact friction between the powder and the revolving blade. Figure 3: Effect of ionising air gun on electric charge generated during the preparation of the: (a) plastic cell and (b) metal cell.", "mime": "application/pdf"}, {"id": "cet-15382", "words": "3372", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-15382", "date": null, "keywords": "bed; blade; layer; powder; roller; spreading; surface; tool", "summary": "Effects of spreader geometry on powder spreading process in powder bed additive manufacturing. Figure 4: Powder layer spread using different tools: (a) top view with the blade-shaped tool; (b) cross-section with the blade-shaped tool; (c) top view with the roller-shaped tool; (d) cross-section with the roller-shaped tool.", "mime": "application/pdf"}, {"id": "cet-15383", "words": "3523", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15383", "date": null, "keywords": "bed; image; layer; powder; spreading", "summary": "Conclusions A new image acquisition procedure and an improved heated chamber were developed to extend the ability of the experimental apparatus previously developed at the University of Salerno to spread powder layers and study their quality. Surface-based methods evaluate powder layer quality using non-contact techniques like confocal microscopy (Tang et al., 2023), X-ray imaging (Penny et al., 2021), or image analysis.", "mime": "application/pdf"}, {"id": "cet-15384", "words": "3372", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15384", "date": null, "keywords": "bulk; crystallinity; crystallization; crystals; diffusion; interactions; lithium; membrane; simulations; system; water", "summary": "Experimental validation supports these findings, showing that PP membranes significantly improve crystal quality and structure. This work underscores the essential role of PP membranes in advancing sustainable and efficient lithium recovery technologies.", "mime": "application/pdf"}, {"id": "cet-15385", "words": "3409", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15385", "date": null, "keywords": "charge; dipole; force; interactions; model; particles; range", "summary": "Such phenomenon, which can occur from close interactions between charged particles or from an external electric field, has important implications. Accurate modelling of these interactions requires a more rigorous approach to charge distributions on particle surfaces, addressing local inhomogeneities with advanced mathematical methods.", "mime": "application/pdf"}, {"id": "cet-15386", "words": "3629", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15386", "date": null, "keywords": "behavior; bentonite; coverage; figure; particles; solid; surface; surfactant; suspensions; wettability", "summary": "Modifying the wettability of solid surfaces has significant implications in areas ranging from the petroleum industry, where enhanced oil recovery is requested, to the textile industry, as well as in the protection of infrastructure such as solar panels and satellites, and in coatings for the materials industry (Cuevas Becerra, 2006; Dos Santos and Goncalves, 2016). Beyond this concentration, no additional data were obtained, first because there is no particular interest in reaching higher surface coverages and second, because of the high adsorption capacity of bentonite, characterized by an extremely large surface area.", "mime": "application/pdf"}, {"id": "cet-15387", "words": "3707", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15387", "date": null, "keywords": "ch4; oxidation; reduction; reforming", "summary": "Samples coded Ce-Al, Ce-Cu-Al and Ce-Cu-Ca-Al were mixed from commercial powders according to the ratio reported in Table 1. In the sample (Ce-Al) the presence of Al\u03dcO\u03dd does not seem to have a measurable influence in improving the oxygen availability of CeO\u03dc.", "mime": "application/pdf"}, {"id": "cet-15388", "words": "3093", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15388", "date": null, "keywords": "aluminum; blisters; model; pharmaceutical; pvc; reaction; separation; waste", "summary": "3. Experimental Procedure The separation procedure involved introducing approximately 0.100 g of blister material into 10.0 mL of an acidic solution. The process included a 300 mL semi-batch reactor loaded with Solution 2, to which eight batches of 6.3 g of blister material were added.", "mime": "application/pdf"}, {"id": "cet-15389", "words": "3887", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15389", "date": null, "keywords": "cracking; light; mfi; naphtha; zeolite", "summary": "Accepted: 26 April 2025 Please cite this article as: Hodoshima S., 2025, On-purpose Propylene Production from Light Naphtha over Zeolite-based Composite with Low Energy Consumption, Chemical Engineering Transactions, 117, 829-834 DOI:10.3303/CET25117139 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 On-purpose Propylene Production from Light Naphtha over Zeolite-based Composite with Low Energy Consumption Shinya Hodoshima Research & Development Center, Chiyoda Corporation, 3-13 Moriya-cho, Kanagawa-ku, Yokohama, Kanagawa 221-0022, Japan hodoshima.shinya@chiyodacorp.com Catalytic cracking of light-naphtha feed over zeolite-based composite, consisting of MFI-zeolite containing Fe, Ga and Al species (Fe-Ga-Al-MFI) and silicon-oxide binder (SiO2), was investigated to establish an efficient method for on-purpose propylene production with low energy consumption. Catalytic cracking of light-naphtha feed as an alternative method for on-purpose propylene production to conventional thermal cracking is strongly desired to meet increasing propylene demand.", "mime": "application/pdf"}, {"id": "cet-15390", "words": "3395", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15390", "date": null, "keywords": "carbon; coo; decomposition; energy; nitrocellulose; oxide", "summary": "The catalytic effect of CuO-doped activated carbon on thermal decomposition and combustion of AN/Mg/NC composite. Non-isothermal kinetic studies on thermal decomposition of energetic materials: KNF and NTO.", "mime": "application/pdf"}, {"id": "cet-15391", "words": "3705", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15391", "date": null, "keywords": "aquathermolysis; catalyst; content; crude; nfe; oil; steel; viscosity", "summary": "Catalytic aquathermolysis used for viscosity reduction of heavy crude oils: A review. The results conclude that using the catalyst during the aquathermolysis process promotes the upgrading of heavy crude oil properties while reducing the corrosive effect generated on API N-80 steel.", "mime": "application/pdf"}, {"id": "cet-15392", "words": "3433", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15392", "date": null, "keywords": "aquathermolysis; catalyst; crude; fractions; molecular; oils; viscosity; weight", "summary": "The results showed that heavy crude oils subjected to steam injection conditions presented an increase in viscosity and density compared to the original crude oils. Finally, the variation in the physicochemical properties of heavy crude oils shows that the thermochemical method is a valuable and complementary tool in thermal recovery.", "mime": "application/pdf"}, {"id": "cet-15393", "words": "3416", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15393", "date": null, "keywords": "acetone; catalysts; conversion; ethanol; oxide; reaction; zinc", "summary": "Figure 3: Effect of temperature on the yields of ethanol conversion reaction products over catalyst Ce-Zn=2-8 As can be seen, the conversion of ethanol on this catalyst begins at a temperature of 300 \u00b0C. Accepted: 6 May 2025 Please cite this article as: Taghi T., Baghiyev V., 2025, Ethanol Conversion Into Acetone over Binary Cerium\u2013zinc Oxide Catalysts, Chemical Engineering Transactions, 117, 853-858 DOI:10.3303/CET25117143 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 Ethanol Conversion into Acetone Over Binary Cerium\u2013Zinc Oxide Catalysts Tahmina Taghi*, Vagif Baghiyev Azerbaijan State Oil and Industry University, Azadliq Av. 34, AZ1010 tahmina.taghi@gmail.com This paper is devoted to the study of ethanol conversion to acetone in the presence of water vapor using binary cerium-zinc oxide (Ce-Zn-O) catalysts.", "mime": "application/pdf"}, {"id": "cet-15394", "words": "2738", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15394", "date": null, "keywords": "bi12o17cl2; degradation; doping; energy; er3; materials; nir; yb3", "summary": "The photocatalytic decolourisation of rhodamine B dye on Yb3+ and Er3+ doped Bi12O17Cl2 materials was assessed under visible light and natural sunlight. Figures 2a and b confirm the successful synthesis of Bi1217Cl2 and doped materials.", "mime": "application/pdf"}, {"id": "cet-15395", "words": "3362", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15395", "date": null, "keywords": "ch4; co2; energy; h2o; process; products; reaction", "summary": "The thermodynamic analysis of global reaction routes plays a fundamental role in the development of sustainable processes for utilizing methane (CH4) without emitting carbon dioxide (CO2). This work focused on evaluating different reaction routes for the production of urea, as a case study, avoiding the emission of CO2, with a focus on identifying a global exothermic process.", "mime": "application/pdf"}, {"id": "cet-15396", "words": "2754", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15396", "date": null, "keywords": "cfd; heat; hidic; liquid; mass; model; phase; simulation; transfer", "summary": "The objective of this stage is to obtain the macroscopic conditions for each tray (flows, temperature, 873 concentrations, equilibrium ratio), these will be used to set up the boundary and initial conditions in CFD simulations. Values of boundary conditions for CFD simulation at selected HIDiC stages.", "mime": "application/pdf"}, {"id": "cet-15397", "words": "3302", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15397", "date": null, "keywords": "absorber; desalination; evaporation; performance; rgo; solar; surface; tio2; water", "summary": "\ufffd\u0307\ufffd = \u2206\ud835\udc5a \ud835\udc60 \u00d7 \ud835\udc61 (2) Where \u0394m is the change of mass due to water evaporation (kg), s is the effective absorption area (m2), and t is the solar irradiation time (h). Solar-driven interfacial water evaporation hinges on the principle of heat localisation at the water-air interface which in turn leads to extraordinary photothermal conversion potential and water evaporation rates.", "mime": "application/pdf"}, {"id": "cet-15398", "words": "3535", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15398", "date": null, "keywords": "basil; extraction; fiber; hbs; min; rbs; seeds; water", "summary": "The UAE of lemon basil seeds (Ocimum \u00d7 africanum L.) produced a lower molecular weight, approximately 480 kDa, in comparison to the SSE of basil seeds (Ocimum basilicum L.), which exhibited a molecular weight of 2320 kDa. Although the primary components of DF extracted from lemon basil seeds, Arabinogalactan, differ from those found in basil seeds, Glucomannan, both types of DF contain uronic acid.", "mime": "application/pdf"}, {"id": "cet-15399", "words": "3189", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15399", "date": null, "keywords": "acid; fatty; mass; process; recovery; solution; stripping; vfas; water", "summary": "Acetic Acid (AA) and Valeric Acid (VA) recovery from single acid solutions and a mix of acid solutions was investigated. The simulations were carried out considering an atmospheric pressure (1.01325) for the three steps reported in Figure 3 with the following temperature: stripping = 93.8\u00b0C; flash = 81\u00b0C; heater = 93.8\u00b0C. 892 Table 3: stripping step and thermodynamic model validation Parameter Experimental results Simulation results \u0394[%] Final mass of acetic acid [g] 8.53 8.59 +0.7% Final volume of acid solution", "mime": "application/pdf"}, {"id": "cet-15400", "words": "3878", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15400", "date": null, "keywords": "coating; column; contact; flow; gas; holdup; liquid; mass; packings; surface; transfer", "summary": "4. Conclusions The effects of hydrophobic coatings on liquid holdup and mass transfer in structured packings were systematically investigated. The coating significantly reduces the amount of liquid retained in the column during operation, this effect is most noticeable at high liquid flow rates.", "mime": "application/pdf"}, {"id": "cet-15401", "words": "3703", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15401", "date": null, "keywords": "area; figure; foaming; printing; surface", "summary": "Results show a 5\u201323% increase in surface area, supporting a more efficient mass transfer. This work aims to understand the role exerted by foam-printing in the fruitful modification of the texture of the packing surface, so to increase surface area.", "mime": "application/pdf"}, {"id": "cet-15402", "words": "3373", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15402", "date": null, "keywords": "acids; experimental; extraction; feed; hexadecane; process; propionic; row; solvent", "summary": "The feed solution was prepared to contain 33 g/L of butyric acid and 13 g/L of propionic acid in ultrapure water, with pH adjusted using sodium hydroxide. Acids with greater hydrophobicity, such as butyric acid, showed higher affinity for the organic phase, resulting in higher recovery percentages compared to propionic acid.", "mime": "application/pdf"}, {"id": "cet-15403", "words": "3459", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15403", "date": null, "keywords": "biodiesel; cnc; efficiency; hydrogels; paam; psa; removal; water", "summary": "a b Figure 2: FTIR of PSA (a) and FTIR of PAam hydrogels (b). These findings highlight the potential of these hydrogels for biodiesel treatment and provides valuable insights for optimizing hydrogel formulations and treatment conditions, contributing to advancements in oil dehydration technologies and the development of hydrophilic materials for biodiesel purification.", "mime": "application/pdf"}, {"id": "cet-15404", "words": "3260", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15404", "date": null, "keywords": "adsorption; composites; co\u2082; csp; geopolymer; materials; removal; zeolite", "summary": "The novel geopolymer-zeolite composites exhibited CO\u2082 adsorption capacities of up to 3 mmol/g at 1 bar, with CO\u2082/N\u2082 selectivity ranging from 50 to 300 at 0.1 bar, highlighting their potential for the separation of gas mixtures. Adsorption capacities were determined using the ideal gas law, with incremental pressure steps up to 1 bar enabling detailed isotherm construction.", "mime": "application/pdf"}, {"id": "cet-15405", "words": "3315", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15405", "date": null, "keywords": "bed; biodiesel; hydrogel; raschig; removal; rings; swelling; water", "summary": "Figure 2: Bed containing hydrogel Raschig rings (W = 0.80 g water/g hydrogel) for water removal from fuels The water-biodiesel emulsion fed into the hydrogel bed was prepared by adding distilled water to biodiesel and mixing it using an Ultra Turrax disperser (IKA, model T65 digital) for 30 minutes at a rotation speed of 4000 rpm. Overall, this work represents significant advancements in the use of hydrogel beds for water removal from fuels, offering a simpler, cleaner and potentially more cost-effective industrial solution.", "mime": "application/pdf"}, {"id": "cet-15406", "words": "3215", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15406", "date": null, "keywords": "adsorption; compounds; mate; model; pfo; pso; yerba; \ud835\udc46\ud835\udc3f\ud835\udc45", "summary": "Materials and Methods This section is intended to describe the materials used as well as the methodology for preparing the yerba mate extract, phenolic adsorption and data processing, summarized in Figure 1. This concentrated extract can then be used for further analysis or adsorption studies.", "mime": "application/pdf"}, {"id": "cet-15407", "words": "3289", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15407", "date": null, "keywords": "cosolvent; effect; extraction; flowrate; lavender; oil; temperature; yield", "summary": "Kant R., & Kumar A.,2022, Review on essential oil extraction from aromatic and medicinal plants: techniques, performance and economic analysis, Sustainable Chemistry and Pharmacy 30: 100829. However, in terms of lavender oil composition the effect of extraction temperature is more pronounced for many components than the other two parameters.", "mime": "application/pdf"}, {"id": "cet-15408", "words": "3848", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15408", "date": null, "keywords": "atr; a\u00e7a\u00ed; energy; process; processes; production; scwg; temperature; \ud835\udc41\ud835\udc36 \ud835\udc56=1", "summary": "Additionally, the free software TeS (Thermodynamic Equilibrium Simulation) was used for the thermodynamic characterization of a\u00e7a\u00ed seed reforming processes. Thermochemical processes are vital in the search for clean, renewable energy sources and can play a key role in the thermochemical recovery of various agro-industrial by-products.", "mime": "application/pdf"}, {"id": "cet-15409", "words": "3400", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15409", "date": null, "keywords": "acetate; acid; acoh; binary; column; data; distillation; propyl; simulation; water", "summary": "Conclusions The use of azeotropic distillation with n-propyl acetate overcomes the limitations of binary distillation for AcOH/W separation caused by the pinch point in the liquid-vapor equilibrium near pure water. Azeotropic distillation simulation In AVEVA Pro/II software, after the selection of the UNIFAC temperature dependent (Fredenslund et al., 1975), an initial study was conducted employing the shortcut distillation unit.", "mime": "application/pdf"}, {"id": "cet-15410", "words": "4300", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15410", "date": null, "keywords": "bagasse; biomass; energy; et al; process; products; pyrolysis; simulation; sugarcane; temperature", "summary": "1. Introduction Biofuels, or fuels derived from biomass, are important alternatives for reducing greenhouse gas emissions, combating global warming (Rial, 2024) and contributing to the global energy supply (Miranda et al., 2019). This process consists of the thermal decomposition of the organic matrix of the biomass in the absence of oxygen or a substoichiometric amount of combustion, which can simultaneously produce products in the liquid (tar \u2013 bio-oil), solid (coal \u2013 biochar) and gaseous (mainly syngas \u2013 CO and H2) states (Miranda et al., 2021).", "mime": "application/pdf"}, {"id": "cet-15411", "words": "2653", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15411", "date": null, "keywords": "flow; gas; liquid; oil; phase", "summary": "Case 1, USL 1 m/s, WG 30000 kg/h. Pressure (x), liquid holdup (\u2206), liquid velocity (\u25ca) 964 The first calculation with gas flow at 20000 kg/h generates a stratified flow and no intermittent flow pattern is found. m/s 2.00 2.84 3.67 4.52 5.38 7.17 Flow pattern strat strat- wav slug strat strat strat-wav As previously discussed, there is no two-phase flow for gas flow rates below 9100 kg/h. Figure 3.", "mime": "application/pdf"}, {"id": "cet-15412", "words": "3031", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15412", "date": null, "keywords": "drop; drop size; exponent; impeller; liquid; size", "summary": "On the contrary, the values of the multifractal exponent in region B, which is above the impeller symmetrically to region A (see Figure 1), are systematically lower compared to region A and about 8% lower than in region C. 3.2 Relation between Sauter mean diameter d32 and maximum drop size dmax The ratio of the Sauter mean diameter d32 and the maximum drop size dmax was calculated according to Eq(2) for the maximum drop sizes estimated from the cumulative frequency drop size distribution. The correct determination of maximum drop size was found to be a crucial factor for the correct estimation of the multifractal exponent \uf061FT for systems agitated by high-shear sawtooth impeller also.", "mime": "application/pdf"}, {"id": "cet-15413", "words": "3519", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15413", "date": null, "keywords": "crude; limonene; oil; oils; reduction; viscosity", "summary": "For this reason, this research evaluated the use of natural additives as viscosity reducers for heavy crude oils. Viscosity reducers modify the physicochemical properties of heavy crude oil, facilitating its transportation; this, in turn, results in a decrease in cohesion between molecules and allows the heavy crude oil to flow easily through pipelines and processing equipment, which not only simplifies operations but also reduces the costs associated with handling heavy crudes.", "mime": "application/pdf"}, {"id": "cet-15414", "words": "3201", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15414", "date": null, "keywords": "anode; cell; electric; fuel; heat; interface; sb2o3", "summary": "The heat generation and consumption by chemical reactions are described by two separate source terms defined as \ud835\udc46\ud835\udc5c\ud835\udc65\ud835\udc56\ud835\udc51\ud835\udc4e\ud835\udc61\ud835\udc56\ud835\udc5c\ud835\udc5b = \u2212\ud835\udc46\ud835\udc5c\ud835\udc57\ud835\udc5b\ud835\udeff(\ud835\udf19), \ud835\udc46\ud835\udc5f\ud835\udc52\ud835\udc51\ud835\udc62\ud835\udc50\ud835\udc61\ud835\udc56\ud835\udc5c\ud835\udc5b = \ud835\udc46\ud835\udc5f\ufffd\u0307\ufffd, \ud835\udc46\ud835\udc5c = \ud835\udc3b1 3\ud835\udc67\ud835\udc42\ud835\udc39 \ud835\udf0e\ud835\udc46\ud835\udc4f\ud835\udf110\ud835\udc45 \ud835\udc50\ud835\udc5d,\ud835\udc46\ud835\udc4f\ud835\udf07\ud835\udc46\ud835\udc4f(\ud835\udc47\ud835\udc5a\ud835\udc4e\ud835\udc65\u2212\ud835\udc47\ud835\udc5a\ud835\udc56\ud835\udc5b) , \ud835\udc46\ud835\udc5f = \ud835\udf0c\ud835\udc46\ud835\udc4f2\ud835\udc423\ud835\udc3b2 \ud835\udc40\ud835\udc46\ud835\udc4f2\ud835\udc423\ud835\udf0c\ud835\udc46\ud835\udc4f\ud835\udc50\ud835\udc5d,\ud835\udc46\ud835\udc4f(\ud835\udc47\ud835\udc5a\ud835\udc4e\ud835\udc65\u2212\ud835\udc47\ud835\udc5a\ud835\udc56\ud835\udc5b) (13) where \ud835\udc3b1 and \ud835\udc3b2 are heat generation intensities listed in Table 1. 1 \u2013 cathode, 2 \u2013 solid electrolyte, 3 \u2013 interface between liquid Sb and Sb2O3.", "mime": "application/pdf"}, {"id": "cet-15415", "words": "3034", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15415", "date": null, "keywords": "figure; fluid; impeller; pluronic; rate; shear; velocity; water", "summary": "The mean velocity, U, is calculated as the ensemble average of the instantaneous velocity values, u(t), as: \ud835\udc48 = \u2211 \ud835\udc62\ud835\udc56(\ud835\udc61) \ud835\udc41\ud835\udc50\ud835\udc63 \ud835\udc56=1 \ud835\udc41\ud835\udc50\ud835\udc63 (2) where Ncv is the number of validated instantaneous velocities. The trend of the power number for the three mixtures stirred at different impeller speeds corresponding to different rotational Reynolds numbers in Figure 2b suggests that the flow is laminar up to Re=10, while at higher Re the flow is in the transitional regime.", "mime": "application/pdf"}, {"id": "cet-15416", "words": "3361", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15416", "date": null, "keywords": "films; formulations; oxide; properties; starch; zinc; zno", "summary": "al., (2022), who used different ratios of plasticizer to improve the mechanical properties of starch films, or Hashem et. Hashem et al., (2023), reported soil degradation of composite films made of hydroxypropyl starch, polyvinyl alcohol and zinc oxide nanoparticles and observed biodegradation percentages of 85% to hydroxypropyl starch film and between 70% to 80 % to the composite\u2019s films.", "mime": "application/pdf"}, {"id": "cet-15417", "words": "3359", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15417", "date": null, "keywords": "b2o3; metal; n.d; process; reaction; synthesis; temperature", "summary": "References Barbarossa S., Casu M., Orr\u00f9 R., Locci A.M., Cao G., Garroni S., Bellucci D., Cannillo V., 2024, Synthesis, Sintering, Mechanical Properties and Oxidation Behavior of (Zr0.5Me0.5)B2 (Me = Ta, Hf) Solid Solutions, Ceramics International, 50, 7, 12158-12166 Barin I., 1995, Thermochemical Data of Pure Substances, 3rd ed., VCH, Germany Fahrenholtz W.G., Binner J., Zou J., 2016, Synthesis of ultra-refractory transition metal diboride compounds, Journal of Materials Research, 31, 2757\u20132772 Green D.W., Perry H.R., 2007, Perry\u2019s Chemical Engineers\u2019 Handbook, 8th ed., McGraw-Hill, USA Guo W.-M., Zhang G.-J., You Y., Wu S.-H., Lin H.-T., 2014, TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum, Journal of the American Ceramic Society, 97, 5, 1359\u20131362 Kolios G., Frauhammer J., Eigenberger G., 2002, Efficient reactor concepts for coupling of endothermic and exothermic reactions, Chemical Engineering Science, 57, 9, 1505-1510 Licheri R., Musa C., Orr\u00f9 R., Cao G., Sciti D., Silvestroni L., 2016, Bulk Monolithic Zirconium and Tantalum Diborides by Reactive and Non-reactive Spark Plasma Sintering, Journal of Alloys and Compounds, 663 351-359 Munir Z.A., Anselmi-Tamburini U., 1989, Self-propagating exothermic reactions: The synthesis of high- temperature materials by combustion, Materials Science Reports, 3, 7\u20138, 277-365 Sani E., Meucci M., Mercatelli L., Balbo A., Musa C., Licheri R., Orr\u00f9 R., Cao G., 2017, Titanium diboride ceramics for solar thermal absorbers, Solar Energy Materials and Solar Cells, 169, 313 \u2013 319 Wu K.-H., Wang Y., Yu-Yang, Zhang G.-H., Jiao S.-Q., Chou K.-C., 2019, Low temperature synthesis of titanium diboride nanosheets by molten salt\u2013assisted borothermal reduction of TiO2, Journal of Nanoparticle Research, 21, 103 1002 CET-vol117-b.pdf 191casu.pdf Process Integration Approach for the Efficient Synthesis of Metal Boride Ceramics Thermodynamic analysis Defining Z as the molar fraction of the desired product obtained according to Eq(1) and (1 \u2212 Z) as the molar fraction obtained by Eq(2), the enthalpy balance for the adiabatic SHS process is: 0 = \u2206hr + \u03c5MeB2qMeB2 + (1 \u2212 Z)\u03c5B2O3qB2O3 (3) where the heat generated by the combined reactions can be described as: \u2206hr = \u03c5MeB2\u2206hf,MeB2 + (1 \u2212 Z)\u03c5B2O3\u2206hf,B2O3 \u2212 (1 \u2212 Z)\u03c5MeO2\u2206hf,MeO2 (4)", "mime": "application/pdf"}, {"id": "cet-15418", "words": "3928", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15418", "date": null, "keywords": "cellulose; fibers; materials; production; sample; textile; tiles; waste; water", "summary": "Cavalcanti Y.F., Fonseca H.R., Medeiros A.D., Durval I.J., Costa A.F., Silva Junior C.J.G., Sarubbo L.A., 2023, Alternative tomato-based media for bacterial cellulose production, International Journal of Biological Macromolecules, 229, 1255\u20131264. doi:10.1016/j.ijbiomac.2023.07.119. As an alternative, several studies have sought to explore alternative media for BC production, using agroindustrial by-products and food waste, such as fruit peels, corn residues, and other organic materials (Chen et al., 2010; Cavalcanti et al., 2023; Galdino et al., 2020).", "mime": "application/pdf"}, {"id": "cet-15419", "words": "3304", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15419", "date": null, "keywords": "aragonite; calcium; composites; ebws; matrix; particles; polymer; properties", "summary": "This made it an interesting candidate for the preparation of polymer composites. The incorporation of commercial CaCO3 into PP matrix to compare with aragonite recovered from the mine wastewater is a subject of ongoing investigations.", "mime": "application/pdf"}, {"id": "cet-15420", "words": "2550", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15420", "date": null, "keywords": "algorithm; boiling; chemical; compounds; model; properties; target", "summary": "When combined with a Genetic Algorithm, this methodology successfully generated chemical structures meeting specified property targets. Six cases were investigated to generate chemical compounds with target boiling points of 200\u2013205 K, 250\u2013255 K, 300\u2013305 K, 350\u2013355 K, 400\u2013405 K, and 450\u2013455 K. Table 2 presents the results, including the target boiling temperature, the SMILES structure of the generated compounds, the predicted boiling temperature, the number of iterations utilized, and the deviation from the target values.", "mime": "application/pdf"}, {"id": "cet-15421", "words": "3093", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15421", "date": null, "keywords": "chemical; data; datasets; esol; model; molecules; training; vae", "summary": "This critical step helps maintain property prediction consistency across original and generated molecular data. This study presents a novel approach to enhancing molecular property prediction through variational autoencoder (VAE)-assisted data augmentation in low-data regimes.", "mime": "application/pdf"}, {"id": "cet-15422", "words": "3228", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15422", "date": null, "keywords": "maintenance; model; planning; turnaround; unit; year", "summary": "Unit Maximum time until the first turnaround, Lu, months Group for turnarounds Unit Maximum time until the first turnaround, Lu, months Group for turnarounds Unit Maximum time until the first turnaround, Lu, months Group for turnarounds DST1 62 1 FCC 50 1 DST2 17 2 CKU1 62 1 HNK 34 I CKU2 17 2 HDT2 62 1 URC 34 I HDT1 17 2 This study analyzed six scenarios to optimize refinery maintenance planning by varying the intervals between major shutdowns and the campaign times of the Catalytic Cracking Unit (FCC). Refineries are complex networks of integrated process units, and maintenance turnarounds, involving temporary shutdowns for inspection and repair, can significantly disrupt production and reduce revenues.", "mime": "application/pdf"}, {"id": "cet-15423", "words": "3587", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15423", "date": null, "keywords": "bakken; compressor; conditions; figure; flow; model; operating; performance; surge; system; test", "summary": "Figure 1 Compressor system configuration; a) Large discharge volume b) Compressors in series In addition, uncertainties in the detection of flow conditions, transients in the flow rate, the occurrence of secondary flows, high-frequency pressure fluctuations, delays, shall be considered too.", "mime": "application/pdf"}, {"id": "cet-15424", "words": "3146", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15424", "date": null, "keywords": "biomethane; cycle; energy; liquefaction; nitrogen; pressure; refrigeration; reverse", "summary": "Figure 4: Scheme of the Claude cycle Table 4: Optimal decision variables for the Claude cycle in Figure 4 Variable Symbol Optimal value BM pressure at LNG-100 inlet, kPa P2 3761.30 Max. refrigeration cycle pressure, kPa P5 7438.70 Temperature after BM precooling, \u00b0C T7 -18.9 Temperature before VLV-101 valve, kPa T9 -157.40 Intermediate compression pressure, kPa P18 1100.00 BM molar flow rate to K-101, kmol/h \ufffd\u0307\ufffd12 37.56 4. However, they do encounter challenges when faced with highly non-linear objective functions, as is the case in liquefaction cycle optimization (Mitchell, 1998).", "mime": "application/pdf"}, {"id": "cet-15425", "words": "3447", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15425", "date": null, "keywords": "biomass; capacity; colombia; electricity; emissions; energy; model; plants; system", "summary": "The authors would like to acknowledge the financial support from the Ministry of Science, Technology, and Innovation of Colombia for the project Development of a computational tool and renewable energy technologies for energy transition in high mountain areas post-pandemic CD 82605 CT ICETEX 2022-0644. Alhashedi et al. (2023) proposed a MILP optimisation model to integrate renewable energy into the power grids of Dhahran, Saudi Arabia, and Austin, USA.", "mime": "application/pdf"}, {"id": "cet-15426", "words": "3413", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15426", "date": null, "keywords": "capacity; cost; emissions; energy; gas; heat; heating; pamplona; systems", "summary": "Instead, the supply of heat energy relies on a combination of decentralised and centralised systems. The need for sustainable heating solutions becomes even more urgent when considering the recent changes in energy demand observed in Pamplona.", "mime": "application/pdf"}, {"id": "cet-15427", "words": "3294", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15427", "date": null, "keywords": "bangladesh; data; dye; membrane; parameters; process; removal; table; textile; treatment; wastewater; water", "summary": "Table 3: The characteristics of spiral wound membranes Manufacturer Document Parameter Element type TML20D-400 Low fouling Diameter of the element (m) 0.201 Membrane module area (m2) 37 Module Feed flow range (m3/d) 31.8-39.7 Maximum operating pressure (bar) 41 Salt Rejection 99.65-99.8 Water Recovery 15 Salt permeability (m/s) 5.65\u00d710-8 Table 4: Membrane parameters and spacer characteristics and feed operating conditions TML20D-400 Spiral wound RO Membrane parameters and spacer characteristics Parameter hsp(m) dh(m) A (m2) Lf (m) L (m) w (m) Evaluation of the process performance via simulation 2.1 Model Development The work uses Aspen Custom Modeler (ACM) v10 software to simulate and optimize the process parameters for different RO wastewater systems.", "mime": "application/pdf"}, {"id": "cet-15428", "words": "3741", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-15428", "date": null, "keywords": "channel; design; flow; gas; liquid; mass; model; reaction; slug; study; transfer", "summary": "Based on this conceptual diagram, PFR model was applied to the gas flow and liquid flow, respectively, and further, the incorporation of a gas-liquid mass transfer term into the PFR models was considered. These characteristics of two-phase slug flow can bring benefits to reaction system design and operation.", "mime": "application/pdf"}, {"id": "cet-15429", "words": "3930", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15429", "date": null, "keywords": "acetone; analysis; chemical; column; costs; design; ipa; plant; process; production; propylene; reactor; water", "summary": "2. Plant Design 2.1 Plant Description and modelling This section outlines the conceptual plant and describes all the processes simulated using UniSim Design\u00a9 R491 software, including the direct hydration of propylene for IPA production, the extractive distillation of the azeotropic IPA-water mixture, and the dehydrogenation of IPA for acetone production. 2.2 Thermal Integration Thermal integration for the IPA-water azeotropic mixture production and acetone production sections is addressed independently to maintain operational flexibility, enabling adjustments in IPA and acetone output based on market demand.", "mime": "application/pdf"}, {"id": "cet-15430", "words": "3814", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15430", "date": null, "keywords": "bacteria; bioleaching; cereus; conditions; cyanide; degradation; gold; growth", "summary": "4. Conclusion The finding of this study is that Bacillus cereus can thrive in cyanide conditions of 5mmol/L and the fluctuations in ORP show a strong likelihood of successful degradation of cyanide by B. Cereus within the first 24 hours. Key objectives included evaluating the influence of environmental conditions such as pH, temperature, and cyanide concentration on bacterial growth and cyanide degradation.", "mime": "application/pdf"}, {"id": "cet-15431", "words": "3407", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15431", "date": null, "keywords": "analysis; drop; figure; flooding; flow; frequency; gas; liquid; pressure; signals", "summary": "Elisabetta Brunazzi* Dipartimento di Ingegneria Civile e Industriale, Universit\u00e0 di Pisa, Largo Lucio Lazzarino 2, Pisa, 56122, Italy elisabetta.brunazzi@unipi.it This study introduces a comprehensive novel analysis of pressure drop signals in both flooded and partially flooded packed beds. Such a system could form the basis of an advanced control strategy, 1081 where pressure drop signals are continuously analyzed to identify hydrodynamic transitions.", "mime": "application/pdf"}, {"id": "cet-15432", "words": "3300", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15432", "date": null, "keywords": "carbonate; chemical; dimethyl; dmc; methanol; mixture; model; reaction; synthesis; values", "summary": "Process description of direct DMC synthesis This study focuses exclusively on the kinetics of direct methanol synthesis, with other reaction rates intentionally excluded to maintain this focus. 2.1 Catalysts Catalysts play a critical role in addressing the challenges of direct DMC synthesis from methanol and CO\u2082. Among them, metal oxides such as zirconia (ZrO\u2082) and ceria (CeO\u2082) are widely used due to their bifunctionality based on their acidic and basic surface sites.", "mime": "application/pdf"}, {"id": "cet-15433", "words": "3613", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15433", "date": null, "keywords": "adsorbent; adsorption; bed; capture; co2; column; gas; temperature; time", "summary": "[\u03bcm] d90% [\u03bcm] Span [-] dv [\u03bcm] \u03c6 [-] \u03c1f [kg/m3] umf [10-2 m/s] \u03b5mf [-] 400-500 363 532 773 0.770 553 0.75 1380 5.80 0.225 2.4 Experimental Apparatus and Procedure for Adsorption and Desorption Tests The experimental campaign of CO2 adsorption and desorption tests was carried out in a pyrex laboratory-scale fluidization column, with an internal diameter of 50 mm and height of 520 mm. Younas, M.; Sohail, M.; Leong, M.J.B.L.K.; Sumathi, S., 2016, Feasibility of CO2 adsorption by solid adsorbents: A review on low temperature systems, Int.", "mime": "application/pdf"}, {"id": "cet-15434", "words": "4207", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15434", "date": null, "keywords": "acs; activation; adsorption; chemical; olive; precursor; pyrolysis; stones; temperature", "summary": "However, they also offer great potential for conversion into activated carbon (AC) due to their high porosity and large surface area, making them ideal adsorbents for water and gas treatment. Like any carbonaceous waste or agricultural by-product from the food crop sector, olive stones represent an attractive precursor for activated carbon.", "mime": "application/pdf"}, {"id": "cet-15435", "words": "2983", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15435", "date": null, "keywords": "bed; laser; manufacturing; powder; process; reuse; sls; system", "summary": "Accepted: 19 May 2025 Please cite this article as: Sofia D., Girimonte R., 2025, Innovative Powder Reuse Strategy in the Selective Laser Sintering Process Using a Fluidized Bed System, Chemical Engineering Transactions, 117, 1105-1110 DOI:10.3303/CET25117185 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 Innovative Powder Reuse Strategy in the Selective Laser Sintering Process using a Fluidized Bed System Daniele Sofia*, Rossella Girimonte Department of Computer Engineering, Modeling, Electronics and Systems, University of Calabria, Via P. Bucci cubo 44/a Rende (CS), 87036, Italy daniele.sofia@unical.it This study introduces an innovative method for the recovery and reuse of unsintered powder in the Selective Laser Sintering (SLS) process, widely used in additive manufacturing for creating complex components with a broad range of powder materials. This technique enables the production of highly complex and customized components, utilizing a wide range of powder materials and making it possible to create geometries that would be impossible with traditional manufacturing methods (GU et al, 2012).", "mime": "application/pdf"}, {"id": "cet-15436", "words": "3117", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15436", "date": null, "keywords": "analysis; data; dataset; gas; models; oil; pressure; rta; variables; volume", "summary": "The best-performing model achieved an \ud835\udc452 score of 0.982 and a Mean Squared Error (MSE) of 4.878 \u00d7 10\u207b\u2074, demonstrating that RTA data effectively supports BHP prediction and that DT models are well-suited for this application. This study used a ML model to determine BHP using RTA data provided by SPE.", "mime": "application/pdf"}, {"id": "cet-15437", "words": "2798", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15437", "date": null, "keywords": "electrolysis; exergy; fermentation; hydrogen; process; production; \u0307 \ufffd; \ufffd \u0307", "summary": "Conclusions The analysis of dark fermentation and microbial electrolysis processes underscores the system's exceptional robustness and efficiency in hydrogen production from waste substrates such as glycerol and vinasse. Dark fermentation is a promising method for sustainable hydrogen production, using microbial catalysts to convert biomass into hydrogen under anaerobic conditions (Garc\u00eda & Cammarota, 2018).", "mime": "application/pdf"}, {"id": "cet-15438", "words": "3005", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15438", "date": null, "keywords": "analysis; asme; bpvc; et al; industrial; pressure; research; safety; software; standards", "summary": "2.2 Data exploration and planning This study examines research evolution on ASME BPVC software applications by asking: \u00bfHow have scientific publications related to ASME BPVC software evolved globally between 2015-2024? The map of connections in design (figure 3), materials and ASME BPVC standards, generated with VOSviewer, shows an interconnected network of key concepts in structural safety and reliability research for pressurized components.", "mime": "application/pdf"}, {"id": "cet-15439", "words": "3360", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15439", "date": null, "keywords": "16o18o; column; cryogenic; distillation; isotopes; product; ratio; recovery", "summary": "Aria is based on distillation columns initially designed for the purification of Underground Argon (UAr) from sources as the Kinder Morgan\u2019s Doe Canyon wells in Colorado in order to obtain a stream rich in 40Ar (Aaron et al., 2023). As the research project is being developed, the isotope production capacities could be expanded with Seruci-II, the second column with a larger diameter, that is planned to be built and to start its operation, contributing to the development of the industry focusing on stable isotopes production.", "mime": "application/pdf"}, {"id": "cet-15440", "words": "3543", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15440", "date": null, "keywords": "anastomosis; artery; blood; case; hepatic; shear; transplantation; velocity", "summary": "ISBN 979-12-81206-17-5; ISSN 2283-9216 Computational Fluid Dynamics Investigation on Transplantation Anastomoses Filippos F. Karageorgosa, Georgios Tsoulfasa, Aleck H. Alexopoulosb,* aDepartment of Transplantation Surgery, Center for Research and Innovation in Solid Organ Transplantation, Aristotle University School of Medicine, 54642 Thessaloniki, Greece bChemical Process & Energy Resources Institute, 6th km Harilaou-Thermi rd., P.O. Box 60361, 57001, Thessaloniki, Greece aleck@certh.gr A surgical technique, known as hepatic artery patch, is applied in the anastomosis of the hepatic artery to minimize complications such as hepatic artery thrombosis (HAT). To advance the quality of the study and see the characteristics that can potentially be used to explain and eventually prevent hepatic artery thrombosis, there are necessary steps to be made in the current model.", "mime": "application/pdf"}, {"id": "cet-15441", "words": "3550", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15441", "date": null, "keywords": "brener; equation; flow; liquid; mass; sources; waves", "summary": "One of its possible expression applying to thin film flows reads as follows (Brener et al., 2020): 0 3 1 42 3 22 =\uf0f7 \uf0f8 \uf0f6 \uf0e7 \uf0e8 \uf0e6 \u2212+\u2212 \uf071\uf071\uf071\uf071 In this paper, an attempt is made to adapt approaches on the basis of which both the Korteweg-de Vries equation and Whitham equation can be derived for describing thin film flow (Hu et al., 2024) in the presence of mass sources (Brener, 2006).", "mime": "application/pdf"}, {"id": "cet-15442", "words": "3260", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15442", "date": null, "keywords": "figure; gas; pressure; reaction; sodium; temperature; water", "summary": "The mass is calculated using the density of the solution while considering that 700 mL of sodium acetate solution was introduced. Table 1 compares the difference in gas phase pressure between the initial and final states of the hydrogen production, as well as the difference in maximum pressure reached.", "mime": "application/pdf"}, {"id": "cet-15443", "words": "3275", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15443", "date": null, "keywords": "cell; cycle; duplication; microgravity; p21; p27; time", "summary": "1. Introduction From a chemical engineering point of view, cell cycle consists of a cascade of complex enzymatic reactions aiming to the synthesis of biological molecules required for cell duplication. In particular, the aim of this work is the analysis of p21/p27 over expression induced by microgravity, with particular attention to its effect on cell duplication time and quality.", "mime": "application/pdf"}, {"id": "cet-15444", "words": "3526", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15444", "date": null, "keywords": "3dp; dissolution; drug; drug release; filament; fluorescein; printing; release; tablet", "summary": "2.2 Print of drug loaded tablet and drug unloaded tablet A Creality (Shenzhen, China) CR-10S printer (Figure 1B) with nozzle diameter: 0.4 mm was utilized to fabricate drug-loaded tablets. This study addresses these challenges by investigating the fabrication of drug-loaded tablets using FDM 3DP technology (Liparoti et al, 2021) and polyvinyl alcohol (PVA) as the primary polymer matrix; in particular the differences in drug release between a tablet printed with a fluorescein-loaded PVA filament and a tablet printed from pure PVA and loaded with fluorescein by immersion in ethanolic solution are compared.", "mime": "application/pdf"}, {"id": "cet-15445", "words": "3340", "extension": ".pdf", "flesch": "28", "author": null, "title": "cet-15445", "date": null, "keywords": "delivery; drug; efficiency; encapsulation; formation; liposomes; particle; process; spaf; systems", "summary": "Among the numerous molecules available in the market and currently lacking a significant bioavailability for humans, three specific molecules were selected for liposomes encapsulation using SPAF technology. In Figure 2, melatonin loaded liposomes are reported in uniform and almost homogeneous distribution, thus exhibiting the typical morphology of agglomerated liposomes.", "mime": "application/pdf"}, {"id": "cet-15446", "words": "3191", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15446", "date": null, "keywords": "delivery; diclofenac; drug; phosphatidylcholine; release; size; transfersomes", "summary": "Accepted: 12 May 2025 Please cite this article as: Sarnelli S., Reverchon E., Baldino L., 2025, Deformable Nanovesicles Produced by Using a Supercritical Technology for Enhanced Transdermal Drug Delivery, Chemical Engineering Transactions, 117, 1171-1176 DOI:10.3303/CET25117196 CHEMICAL ENGINEERING TRANSACTIONS VOL. 117, 2025 A publication of The Italian Association of Chemical Engineering Online at www.cetjournal.it Guest Editors: Fabrizio Bezzo, Flavio Manenti, Gabriele Pannocchia, Almerinda di Benedetto Copyright \u00a9 2025, AIDIC Servizi S.r.l. ISBN 979-12-81206-17-5; ISSN 2283-9216 Deformable Nanovesicles Produced by Using a Supercritical Technology for Enhanced Transdermal Drug Delivery Sonia Sarnelli, Ernesto Reverchon, Lucia Baldino* Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084, Fisciano (SA), Italy lbaldino@unisa.it Transfersomes are promising nanocarriers for transdermal drug delivery since they are ultra-deformable liposomes constituted of phospholipids and surfactants; these latter compounds work as edge activators, allowing the deformation of the vesicle. This fact makes transfersomes promising candidates for transdermal drug delivery, capable of penetrating through tight intercellular spaces of the skin barrier (Prausnitz and Langer, 2008).", "mime": "application/pdf"}, {"id": "cet-15447", "words": "2904", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15447", "date": null, "keywords": "cmc; fluid; impeller; mixing; power; rpm; vortex", "summary": "Figure 4: Area of vortex at different impeller speeds for the three CMC solutions. Figure 3: Snapshots of vortex formation at given impeller speed and CMC concentration.", "mime": "application/pdf"}, {"id": "cet-15448", "words": "3151", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-15448", "date": null, "keywords": "assessment; equipment; hydrogen; impact; indicator; process; production; risk; safety", "summary": "There are many studies to establish the methodologies of inherent safety. Gao introduced the inherent safety concept to minimize laboratory hazards and developed a dedicated implementation tool called Generic Laboratory Safety Metric (GLSM) which presented a set of generic solutions to laboratory retrofitting towards inherent safety with a novel GLSM as the implementation tool(Gao et al., 2023).", "mime": "application/pdf"}, {"id": "cet-15449", "words": "3757", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15449", "date": null, "keywords": "acids; capsule; dnr; dronedarone; fatty; omega-3; printing; profiles; release", "summary": "DNR release profiles from all tested capsules Differences in release profiles were quantified using difference and similarity factors calculated according to equations (1) and (2). Goyanes et al. (2017) have shown that customized drug release profiles can be achieved with 3D-printed dosage forms.", "mime": "application/pdf"}, {"id": "cet-15450", "words": "3556", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15450", "date": null, "keywords": "chemical; coagulant; nacl; removal; seeds; sulfate; turbidity; water", "summary": "This is consistent with what has been described in several investigations, where chemical coagulants tend to have higher efficiency compared to natural coagulants (Barreto Pardo et al., 2019). The results allow us to identify the 4% NaCl concentration as the best for the preparation of the coagulant from LL, given that with this concentration the highest turbidity removal of 81.3% was achieved using a dose of 4.5 mL/L. Figure 1b shows that the concentration of NaCl does not have a significant effect on the pH of the water, as occurs in experiments carried out with natural coagulants by Carrizales Condori & Enr\u00edquez Nateros (2019).", "mime": "application/pdf"}, {"id": "cet-15451", "words": "2698", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15451", "date": null, "keywords": "adsorption; ann; chitosan; model; removal; rsm; surface", "summary": "With a design matrix from RSM-CCD, input and output data necessary to construct the technique and ANN models were gathered using a four-level design of experiments. Error function ANN RSM Marquart\u2019s percent standard deviation (MPSD) 0.0001 0.0532 Chi-square test (\ud835\udf122) 0.0017 0.0411 Root mean square error (RMSE)", "mime": "application/pdf"}, {"id": "cet-15452", "words": "3868", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15452", "date": null, "keywords": "aptenia; days; et al; portulacastrum; saline; salinity; sesuvium; sesuvium portulacastrum; soil", "summary": "The results showed that, Sesuvium portulacastrum was able to reduce soil salinity from 5.58 to 3.30 mS/cm and from 5.58 to 1.06 mS/cm in 30 and 63 days, respectively. The salinity reduction efficiency of Sesuvium portulacastrum in saline soil reflects favorable effects, evidencing that in 30 days it reaches a value of 41%, and in 63 days 81%.", "mime": "application/pdf"}, {"id": "cet-15453", "words": "3466", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15453", "date": null, "keywords": "area; cover; expansion; growth; huacachina; huacachina lagoon; ica; lagoon; year; \ud835\udc75\ud835\udc70\ud835\udc79", "summary": "Conclusions The multi-temporal analysis of urban expansion allowed us to detect changes in the Huacachina Lagoon area by remote sensing, indicating that from 1988 to 2023, urban growth increased from 448.11 to 972.45 ha, at a rate of change of 14.98% per year, with the most intense growth between 2009 and 2016. 3. Results and discussion 3.1 Distribution and dynamics of urban areas using the BAEI spectral index The processing of the satellite images, the data and the superimposition of the spectral indices made it possible to analyze the evolution of the urban area and other land cover in the Huacachina Lagoon area.", "mime": "application/pdf"}, {"id": "cet-15454", "words": "3602", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15454", "date": null, "keywords": "concentration; exchange; hypochlorite; membrane; naclo; sodium; sodium hypochlorite; solution", "summary": "The factorial design comprised three level variations for sodium chloride concentration as well as for electrical potential on the effect of sodium hypochlorite concentration and specific energy consumption. Table 1: Physical-chemical characteristics of the membranes used adapted from Membrane / Characteristic MK-40 MA-41 Electric resistance (\u03a9.cm2) 2 <11 Ion-exchange capacity (meq/g dry membrane) 2 1.6 Transport number >0.98 0.98 \u00b1 0.02 in 1 M NaCl Thickness (\ud835\udf07\ud835\udc5a) 520 530 \u00b1 20 1220 2.4 Design of experiment by full factorial method The design contemplated the effect of two factors at three levels for each variable to evaluate their effect on sodium hypochlorite concentration and energy consumption.", "mime": "application/pdf"}, {"id": "cet-15455", "words": "3699", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15455", "date": null, "keywords": "bond; figure; groups; liner; propellant; properties; strength", "summary": "Design value of liner Design value of propellant Test conditions Tensile Strength (MPa) \u22651.20 \u22650.60 25 \u00b0C, 100mm/min Elongation (%) \u2265150.0 \u226535.0 25 \u00b0C, 100mm/min Density (kg/m3) \u22641,200 \u22651,750 25 \u00b0C 3.1 Mechanical Properties of Liner Tensile strength tests indicated that as the curing parameter increased, the tensile strength also increased, as shown in Figure 2. Various curing parameters were tested, with Rt values for the propellant (0.75 to 1.55) and liner (0.90 to 1.70).", "mime": "application/pdf"}, {"id": "cet-15456", "words": "2878", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15456", "date": null, "keywords": "asa; aspirin; drug; figure; filament; pla; temperature", "summary": "This work investigates the production of PLA-ASA filament using a low-cost single-screw filament extruder, the effects of 3D printing temperature on ASA stability using Raman Spectroscopy, and the flexibility and integrity of 3D printed PLA-ASA mesh. Figure 7 A) Raman spectra of serpentine pattern using different printing temperatures (200\u00b0C in Blue), (205\u00b0C in sky blue), (210\u00b0C in green), (215\u00b0C in Yellow), and (220\u00b0C in orange).", "mime": "application/pdf"}, {"id": "cet-15457", "words": "3896", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-15457", "date": null, "keywords": "amara; biomass; capture; carbon; loma; plant; purpurea; soil; tillandsia; water", "summary": "Regarding soil carbon, the formula CSP=%CS x S was applied; %CS: Percentage of carbon in the soil and S: Quantity of grams of soil (Ar\u00e9valo y Aponte, 2020). The amount of carbon in the study area (throughout the tillandsial) was obtained using the equation: \ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36 = \ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36 + \ud835\udc36\ud835\udc36\ud835\udc36\ud835\udc36; where:CT: Is the total carbon in Amara loma, CA: aboveground carbon and CS: soil carbon 3. Results and discussions 3.1.", "mime": "application/pdf"}, {"id": "cet-15458", "words": "3956", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15458", "date": null, "keywords": "cake; capacity; flour; food; hemp; hscf; hydrolysis; properties; seed; stability; water", "summary": "= tan\u22121 ( b\u2217 a\u2217 ) (4) where L1*, a1* and b1* are the color values of hydrolyzed samples, while L2*, a2* and b2* are the color values of raw flour. According to its larger particle size, the hydrolyzed flour showed a significantly lower (p<0.05) bulk density than raw flour, i.e. 0.5052 \u00b10.003 g/cm3 vs. 0.6029 \u00b10.004 g/cm3.", "mime": "application/pdf"}, {"id": "cet-15459", "words": "3707", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15459", "date": null, "keywords": "extraction; foaming; food; hph; properties; protein; spe; spes; spirulina", "summary": "Chemical extraction is the most common method applied for Spirulina protein extraction, which involves breaking down the cell walls of the microalgae under alkaline conditions to release intracellular proteins (Ladjal- Ettoumi et al., 2024; Purdi et al., 2023; Mohammadi et al., 2022). To 7 the best of the authors\u2019 knowledge, only a limited number of studies have investigated the technological properties of Spirulina proteins extracted using HPH.", "mime": "application/pdf"}, {"id": "cet-15460", "words": "3154", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15460", "date": null, "keywords": "drying; food; microwave; orange; pomace; system; water; window", "summary": "Assessment of the impact of drying processes on orange peel quality characteristics, Journal of Food Process Engineering, 45(7), e13794. The RW-MW system demonstrated a 65\u201390% reduction in drying time compared to freeze drying and hot-air methods.", "mime": "application/pdf"}, {"id": "cet-15461", "words": "3112", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-15461", "date": null, "keywords": "extrusion; flow; mixing; moisture; rate; rpm; screw; twin; zone", "summary": "Modelling of counter rotating twin screw extrusion, Master Thesis, Mc Master University, 1-145. The numerical simulations provided insights into the axial velocity distribution along the screws, the effect of screw speed on pumping efficiency, and the role of dispersive mixing in the process.", "mime": "application/pdf"}, {"id": "cet-15601", "words": "2817", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15601", "date": null, "keywords": "biogas; data; detection; plant; state; time", "summary": "A threshold value of 85% is requested to label the values as steady state. If the null hypothesis holds, the process is in steady state.", "mime": "application/pdf"}, {"id": "cet-15602", "words": "3584", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15602", "date": null, "keywords": "gas; gas oil; hydrocracking; hydrocracking process; mass; oil; process; sink; water", "summary": "In this sense, one of the processes that depends on these non-renewable resources is gas oil hydrocracking, which in recent years has received increasing attention from oil refining industries, especially in the context of digitalization (Iplik et al., 2020). For this reason, in this work, the mass integration of an energy-integrated hydrocracking plant is proposed based on process simulation, considering the general conditions of the system and the extended development of the material and energy balances, using the Aspen HYSYS\u00ae simulator, the mass-Pinch analysis methodology and mathematical optimization.", "mime": "application/pdf"}, {"id": "cet-15603", "words": "3158", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15603", "date": null, "keywords": "chase; emission; end; operating; plant; stream; tail; total", "summary": "This nonconventional operation can be easily facilitated with a few extra compressors, pumps, pipelines, valves and fittings to recycle all streams from the exits of back end to the inlets of the same subprocess. Ge, S., Xu, Y., Wang, S., Xu, Q., Ho, T., 2021, A win-win strategy for simultaneous air-quality benign and profitable emission reduction during chemical plant shutdown operations.", "mime": "application/pdf"}, {"id": "cet-15604", "words": "3709", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15604", "date": null, "keywords": "amine; capture; co2; control; facility; gas; pcc; unit", "summary": "Accounting for these interactions in the design of control strategies for carbon capture facility is important in ensuring reliable facility operation. Startup of gas turbine units/PCC unit is also an important case to consider.", "mime": "application/pdf"}, {"id": "cet-15605", "words": "3500", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15605", "date": null, "keywords": "hazard; index; lightning; natech; risk; storm; substances; vulnerability; wind", "summary": "Relationship between Ng and lightning storm hazard index, IHsl. Relationship between equipment containing hazardous substances and storm vulnerability index, IVs Equipment type Filling level Construction features IVs Floating Roof Tanks \u226550% / < 50% 4 / 3 Fixed Roof Tank \u226550 % / < 50% 3 / 2 Pressure equipment (Spheres, columns, reactors, ovens, etc.) before PED / according to PED 3 / 2 Pipes under pressure Pipes not under pressure before PED / according to PED 2 /1 1 5.", "mime": "application/pdf"}, {"id": "cet-15606", "words": "3975", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15606", "date": null, "keywords": "adaptation; change; climate; climate change; damage; events; impacts; substances; tanks", "summary": "Although never explicitly highlighted, various parts of Directive 2012/18/EU can be combined into a single strategy that takes climate change adaptation into account. The purpose of the article, in light of the authors' institutional experience in Italy, is to provide guidance on climate change adaptation to managers/employers of establishments with a risk of major accidents.", "mime": "application/pdf"}, {"id": "cet-15607", "words": "4157", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-15607", "date": null, "keywords": "application; buildings; cooling; energy; et al; heating; nanofluids; performance; systems; thermal; use", "summary": "ISBN 979-12-81206-20-5; ISSN 2283-9216 Application of Nanofluids in Buildings Laura Cirrincione a, Gianluca Scaccianoce a, Marco Vocciante b,* aDipartimento di Ingegneria, Universit\u00e0 degli Studi di Palermo, Viale delle Scienze Bld. 9, 90128, Palermo, Italy bDipartimento di Chimica e Chimica Industriale, Universit\u00e0 degli Studi di Genova, via Dodecaneso 31, 16146, Genova, Italy marco.vocciante@unige.it This work reviews and discusses experimental and simulative studies related to nanofluid applications in buildings energy systems and envelope components, including photovoltaic thermal systems, Heating, Ventilation and Air Conditioning (HVAC) systems, thermal energy storage systems and windows. In fact, nanofluids necessitate smaller heating systems, which can deliver the same amount of thermal energy as larger heating systems using base fluids, but are less expensive, also enabling pumping power savings.", "mime": "application/pdf"}, {"id": "cet-15608", "words": "3560", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15608", "date": null, "keywords": "assessment; atex; explosion; hydrogen; ignition; risk; safety; ventilation; zone", "summary": "Application of semi-quantitative AtEx risk assessment to the case study Figure 3: Example of semi-quantitative AtEx risk assessment worksheet This worksheet exemplifies the output derived from a semi-quantitative ATEX risk assessment methodology, based on the risk matrix (LxC), where L denotes the likelihood and C represents the consequence, as reported in Gritti et al., 2023. Table 3: Necessary risk reduction as a function of the initial and the target zone with the use of PCE system Zone Required reliability of the PCE system Initial Target 0 1 SIL 1 0 2 SIL 2 0 nEx SIL 3 Ventilation is a fundamental parameter in AtEx risk assessments for gases, with its significance being particularly pronounced in the case of hydrogen.", "mime": "application/pdf"}, {"id": "cet-15609", "words": "3806", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-15609", "date": null, "keywords": "cryogenic; detection; hydrogen; iso; liquid; pressure; process; risks; safety; systems", "summary": "Venting systems In liquid hydrogen systems, when liquid hydrogen turns to gas, the rapid increase in volume can over-pressurize containment structures, like storage vessels, and cause them to burst. The main hazards associated with hydrogen systems can be listed and prioritized as follow (ISO/TR 15916:2015): flammability (thermal effects, pressure effects, easy ignitability of some mixtures), small size of the molecule (low viscosity, high diffusion rate, high buoyancy), asphyxiation hazards if oxygen is replaced.", "mime": "application/pdf"}, {"id": "cet-15610", "words": "2745", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15610", "date": null, "keywords": "corrosion; h h; network; node; risk; sulphur; table", "summary": "[month] Low \u2264 12 L L ML M H 13 - 24 L L ML MH H > 24 L L M H H Med-low \u2264 12 L L ML MH H 13 - 24 L L M H H > 24 L L M H H Medium \u2264 12 L L M MH H 13 - 24 L L M H H > 24 ML ML MH H H Med-High \u2264 12 ML ML MH H H 13 - 24 ML M H H H > 24 ML M H H H High \u2264 12 MH H H H H 13 - 24 MH H H H H > 24 H H H H H L = Low; ML = Medium Low; M = Medium; MH = Medium High; H = High. Other two bad scenarios are considered to test the network with different conditions: the first one considers the same feedstock but higher temperatures, the second one considers higher temperatures and higher crude\u2019s acidity.", "mime": "application/pdf"}, {"id": "cet-15611", "words": "3541", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15611", "date": null, "keywords": "air; avenue; hours; indoor; levels; metro; peak; station", "summary": "Indoor PM 2.5 levels may derive from emissions of indoor PM 2.5 sources and emissions from outdoor PM 2.5 sources. This observation is also demonstrated by Gupta and Elumalai (2019), where PM levels can be 1.8 to 6.7 times higher near roadways during peak traffic compared to outdoor levels.", "mime": "application/pdf"}, {"id": "cet-15612", "words": "3865", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15612", "date": null, "keywords": "advertising; alfredo; consumption; energy; kwh; light; lighting; mendiola; panels; pollution", "summary": "Table 3: CO2 generation as an environmental impact due to energy consumption of light panels Light panels operating with hydroelectric power (generates 40 g of CO2 per kWh) P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 Energy consumed (kWh) 1. Introduction External advertising on roads or buildings using light panels with LCD (Liquid Crystal Display) screens or liquid crystal displays or LED (Light Emitting Diode) has been overused in many places in recent times, generating this artificial lighting impacts that negatively affect ecosystems (Lazzeroni, Guerrero and Garc\u00eda, 2020).", "mime": "application/pdf"}, {"id": "cet-15613", "words": "3191", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15613", "date": null, "keywords": "building; energy; hong; kong; policy; utility", "summary": "The results also show that financial incentives for the building sector, as proposed in Policies 3 and 4, can enhance the adoption of PV systems. This will be achieved by complishing the following research objectives: (i) To establish a comprehensive and holistic understanding of the solar PV market dynamics by modeling the behaviours and interactions of diverse stakeholders, including the government, utility companies, and the building sector; (ii) To develop a multi-ABM that serves as a dynamic and adaptable policy evaluation tool for both government and utility companies, enabling real-time insights and continuous evaluation of policies, including policy reforms and price adjustments; (iii) To evaluate the effectiveness of current RE policies (e.g., the FiT scheme) in achieving the goals of the HKCAP 2030+ by simulating the decision-making processes of key stakeholders (i.e., building sector); (iv) To analyze the impact of policy reform (e.g., adjustments to the FiT scheme and other regulatory changes) on solar PV adoption by quantifying the effectiveness of policy interventions and identifying the most conducive measures for facilitating solar PV deployment; and (v) To formulate strategic insights and policy recommendations for the key stakeholders involved in the solar PV market by providing forward-looking perspectives to assist stakeholders in aligning their actions with long-term targets and assessing the feasibility of achieving the goals of the HKCAP 2030+ by the target year of 2030.", "mime": "application/pdf"}, {"id": "cet-15614", "words": "3821", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-15614", "date": null, "keywords": "complaints; conditions; data; equipment; infrastructure; lack; language; model; resilience; risk; safety; system; training; working", "summary": "Evgeniia Tauberta*, Tomaso Vairoa, Andrea P. Reverberib, Margherita Pettinatoa, Bruno Fabianoa a DICCA - Civil, Chemical and Environmental Engineering Dept., Genoa University, via Opera Pia 15, 16145, Genoa, Italy b DCCI - Department of Chemistry and Industrial Chemistry, Genoa University, via Dodecaneso 31, 16146, Genoa, Italy taueugen11@gmail.com Assessing risks and resilience in safety management systems\u2014especially in Seveso-classified industrial environments\u2014requires a comprehensive evaluation of human factors, near-misses, and accidents, as well as the causal relationships between system components. Unsafe working conditions Possible risk of overloading the underground tank due to the recirculation of diesel fuel.", "mime": "application/pdf"}, {"id": "cet-15615", "words": "3079", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15615", "date": null, "keywords": "bio; biomass; energy; learning; machine; oil; pyrolysis; yield", "summary": "The dataset includes physicochemical properties of the biomass, key pyrolysis operating conditions, and bio-liquid yield. This is well shown by analysis of PDP plots, where some inconsistencies with known trends emerge when assessing the influence of selected variables on bio-liquid yield.", "mime": "application/pdf"}, {"id": "cet-15616", "words": "3147", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15616", "date": null, "keywords": "cob; corn; loss; pyrolysis; temperature; tga; waste", "summary": "These results demonstrate the potential of corn cob waste as a feedstock for pyrolysis and energy recovery, given its significant volatile matter release and char formation during thermal conversion. Corn cob: a renewable energy source.", "mime": "application/pdf"}, {"id": "cet-15617", "words": "3498", "extension": ".pdf", "flesch": "28", "author": null, "title": "cet-15617", "date": null, "keywords": "concentration; dispersion; gnrs; graphene; model; stability; time", "summary": "Dispersion stability was assessed via polydispersity index (PI) measurements, with a stability threshold defined at PI\u202f<\u202f0.5. Statistical analysis using ANOVA confirmed the significant impact of all three factors (p\u202f<\u202f0.05), with sonication time and concentration exerting the strongest effects on dispersion stability (F\u202f=\u202f69.156 and 67.561, respectively).", "mime": "application/pdf"}, {"id": "cet-15618", "words": "3252", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15618", "date": null, "keywords": "iron; iron nanoparticles; mercury; mining; nanoparticles; sample; soil; water", "summary": "Bioremediation using Escherichia coli also offers a promising alternative, utilizing its mercury bioadsorption capacity to reduce soil mercury levels (Espinoza and Manziny, 2019). Soil samples extracted from mining camps located in the district of Huepetuhe, Peru; which were subjected to three concentrations from mining sites in Huepetuhe, Peru were exposed to iron nanoparticles concentrations of 2.5 mg/kg, 5 mg/kg and 7.5 mg/kg.", "mime": "application/pdf"}, {"id": "cet-15619", "words": "3549", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15619", "date": null, "keywords": "addition; ash; cactus; concrete; pear; ppca; properties; results; sample; strength", "summary": "La mineralog\u00eda en la estimaci\u00f3n de las temperaturas de los incendios forestales y sus efectos inmediatos en Andosoles, Estado de M\u00e9xico. Element Weight % Atomic % C 45.23 53.67 O 50.01 44.45 Mg 0.35 0.20 K 0.58 0.21 Ca 3.84 1.23 Total 100 2.3 Method For the preparation of the concrete mix designed to achieve a compressive strength of f\u2019c = 280 Kg/cm\u00b2, Portland cement (Sol Type I) was used, along with aggregates sourced from the Carapongo quarry, which were characterized according to Peruvian technical standards (PTS), and prickly pear cactus ash.", "mime": "application/pdf"}, {"id": "cet-15620", "words": "3819", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15620", "date": null, "keywords": "cellulose; chemical; cm-1; durian; kraft; lignin; peel; ri6", "summary": "Currently, a number of researches have been conducted using durian peel as raw material, for instance, producing organic fertilizer as biochar, using durian peel fiber as a reinforced filler in composite biomaterials (Chua et al., 2023). Notably, lignin was first extracted from durian peel using two methods: Kraft and alkaline pulpings, with yields of 13.21 % and 7.96 %, respectively.", "mime": "application/pdf"}, {"id": "cet-15621", "words": "2703", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15621", "date": null, "keywords": "cagr; gas; growth; india; industry; model; petrochemical; production", "summary": "By utilizing available Government of India data and literature studies on optimization, a data-driven approach is proposed that provides a framework to encourage planning for cost efficiency, reducing dependence on imported feedstocks, and eventually helps strengthen India's position in global petrochemical markets. 3. Methodology Based on the collected data, a linear programming (LP) model was formulated in LINGO software to optimize the allocation of feedstocks to petrochemical products with the objective of profit maximization for the Indian Petrochemical Industry.", "mime": "application/pdf"}, {"id": "cet-15622", "words": "3320", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15622", "date": null, "keywords": "biodiesel; blends; combustion; emissions; engine; fuel; min-1; power; pressure; rev; value; velocity", "summary": "Currently, in the country's transportation sector, the proportion of distribution of biodiesel blends with petrol diesel is 14%- B14, and the following year, it will be 15%- B15 until it reaches 20% or B20 in 2030. A higher percentage of biodiesel blends utilized in internal combustion engines can develop better lubricity by their chemical double bond components, such as methyl linoleate C19H32O2 and methyl oleate C19H36O2, with more equilibrium in CO2 emissions produced than can be reabsorbed by the plants to close their natural cycle, resulting in a more clean mobility.", "mime": "application/pdf"}, {"id": "cet-15623", "words": "3700", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15623", "date": null, "keywords": "biohydrogen; categories; fermentation; liquid; pretreatments; production; puree; substrate; waste", "summary": "Conversely, CW2 demonstrated higher H2 production and yields in the liquid fraction, attributed to an abundance of readily available fermentable sugars and nutrients. The presence of onions, rich in sugars, phosphorus, potassium, and sulfur (Romano and Zhang, 2008), in the MW improves H2 production (Ben Gaida et al., 2022).", "mime": "application/pdf"}, {"id": "cet-15624", "words": "3989", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15624", "date": null, "keywords": "conditions; conversion; design; experiments; fim; gp1; gp2; methane; model; reactor; scores", "summary": "Figure 3. GP1 model predictions after Iteration 3 showing methane conversion as a function of FIM score. The hybrid framework makes use of two synergistic GP models: i) a first GP (GP1) to map FIM scores to methane conversion prioritizing informative experiments; ii) a second GP (GP2) inversely links reactor conditions to FIM scores, enabling an inverse design strategy to translate optimal FIM targets into actionable operating conditions.", "mime": "application/pdf"}, {"id": "cet-15625", "words": "3948", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15625", "date": null, "keywords": "doi; energy; et al; hydrogen; loss; production; sewage; sewage sludge; sludge; tons; treatment", "summary": "This report uses data from the Hungarian National Environmental Information System, Unified Waste Management Information System Module, focusing on a numerical evaluation of sewage sludge production and treatment in Hungary from 2004 to 2022. As shown in Figure 1, sewage sludge production exhibited a fluctuating trend, with the minimum point in 2004.", "mime": "application/pdf"}, {"id": "cet-15626", "words": "3214", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15626", "date": null, "keywords": "case; co2; dac; energy; fuel; heat; power; process; soec", "summary": "Conclusions This study presents an integrated simulation and energy analysis of green FT fuel production using CO2 from DAC and H2 from SOEC. Zang et al. (2021) performed a comprehensive techno- economic analysis of FT fuel synthesis from CO2 and H2, emphasizing the importance of improving feedstock recycling and conversion ratios.", "mime": "application/pdf"}, {"id": "cet-15627", "words": "3347", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15627", "date": null, "keywords": "analysis; co2; pinch; sink; source; storage; superstructure; \u2193 \u2193", "summary": "CO2 Load (Mt) Infeasible Cascade (Mt) Feasible Cascade (Mt) Pupuk Kaltim Badak LNG Semen Bosowa Semen Tonasa Kutai Tarakan Basin North East Java 5 2.403 5.514 4.65 3.76 0 58.572 \u2193 \u2193 \u2193 \u2193 2 0.493 0.986 7 \u2193 \u2193 1.575 \u2193 \u2193 0.986 59.558 \u2193 \u2193 \u2193 \u2193 \u2193 1 -1.082 -1.082 8 \u2193 \u2193 \u2193 3.791 \u2193 \u2193 -0.096 58.476 \u2193 \u2193 \u2193 \u2193 \u2193 \u2193 12 -4.873 -58.476 20 \u2193 \u2193 \u2193 \u2193 \u2193 \u2193 -58.572 0 \u2193 \u2193 \u2193 \u2193 \u2193 7 0.641 4.487 (Pinch) 27 \u2193 \u2193 \u2193 \u2193 \u2193 -54.085 4.487 \u2193 \u2193 \u2193 \u2193 1 2.216 2.216 28 \u2193 \u2193 \u2193 \u2193 -51.869 6.703 \u2193 \u2193 \u2193 2 6.007 12.014 30 \u2193 \u2193 \u2193 -39.855 18.717 \u2193 These approaches are particularly valuable since CCS planning involves several complex challenges including the temporal and spatial mismatch between CO2 sources and sinks, infrastructure limitations, and capital cost (Handogo et al., 2020).", "mime": "application/pdf"}, {"id": "cet-15628", "words": "3663", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15628", "date": null, "keywords": "carbon; cycle; electrolysis; emissions; energy; hydrogen; lca; life; production; studies; system", "summary": "Vilbergsson et al. (2023) also highlight that low full-load hours (FLH) significantly contribute to increased carbon emissions in hydrogen production systems, even when powered by renewable energy sources. Key findings reveal how regional energy mixes, production technologies, and policy incentives influence the carbon emissions associated with hydrogen production.", "mime": "application/pdf"}, {"id": "cet-15629", "words": "3806", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15629", "date": null, "keywords": "cost; energy; heat; integration; storage; \ud835\udc42\ud835\udc48\ud835\udc47", "summary": "Despite its potential, studies that applied process integration tools to address heat recovery problems with consideration of heat storage remain limited. Wang X., Tian H., Yan F., Feng W., Wang R., Pan J., 2020, Optimization of a distributed energy system with multiple waste heat sources and heat storage of different temperatures based on the energy quality.", "mime": "application/pdf"}, {"id": "cet-15630", "words": "3636", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15630", "date": null, "keywords": "chain; communities; community; cost; energy; power; resource; sharing; supply; technologies; technology", "summary": "A systematic review of power systems resource sharing models classifies the most common methods into 6 categories: double auction theory, blockchain technology, game theory, machine learning, optimization strategies, and other models\u2019 categories. Combined community power supply by different power conversion technologies is shown in Figure 1(b).", "mime": "application/pdf"}, {"id": "cet-15631", "words": "3736", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15631", "date": null, "keywords": "capacity; energy; enhancement; generation; grid; malaysia; model; planning; solar; system", "summary": "To tackle this issue, numerous energy system models have been introduced to capture the intermittency of variable renewable energy in energy planning. ISBN 979-12-81206-21-2; ISSN 2283-9216 Optimising Energy Transitions: Assessing Renewable Energy Integrations with Grid Limitations Xin Hui Chenga, Dhana Raj Markandub, Bing Shen Howa, Viknesh Andiappana,* a Research Centre for Sustainable Technologies, Faculty of Engineering, Computing and Science, Swinburne University of Technology Sarawak, Jalan Simpang Tiga, 93350 Kuching, Sarawak, Malaysia b Institute of Strategic and International Studies Malaysia, Persiaran Sultan Salahuddin, 50480 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur, Malaysia vmurugappan@swinburne.edu.my Achieving high shares of renewable energy requires not only policy ambition but also adequate grid infrastructure to support the intermittency of variable renewable energy generation.", "mime": "application/pdf"}, {"id": "cet-15632", "words": "3893", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15632", "date": null, "keywords": "methanol; model; neutrosophic; owner; production; profit; tolerance; usd", "summary": "The model has generated important insights on the allocation of economic benefits to different plant owners based on their risk appetite under neutrosophic decision environment. Figure 1: Optimal input and output flows for the case study Table 6: Optimal profit allocation for the case study.", "mime": "application/pdf"}, {"id": "cet-15633", "words": "3944", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15633", "date": null, "keywords": "capture; cluster; co2; coalition; compensation; cost; energy; infrastructure; plant; removal; system", "summary": "In this study, the multi-period equations used to represent the interaction between the energy system and industrial plants are adapted from Chew et al. (2025). The case study aims to establish a fair allocation of resources, including compensation, energy loss, and CO2 removal deficits, among cluster plants during a gas turbine disruption.", "mime": "application/pdf"}, {"id": "cet-15634", "words": "3789", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-15634", "date": null, "keywords": "compression; cost; heat; heat pump; pump; stage; system; temperature; usd", "summary": "It is expected that by 2050, the total number of industrial heat pumps installed worldwide will reach 80 \u00d7 10\u2076 (IRENA, 2023), meaning that heat pumps will supply 30 % of the heat demand in light industries (EHPA, 2023a). Bhadbhade N., Ong B. H.Y., Olsen D. G., Wellig B., Patel M. K., 2024, Assessment of CO2 abatement potential of heat pumps using pinch analysis for the Swiss chocolate industry.", "mime": "application/pdf"}, {"id": "cet-15635", "words": "3852", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-15635", "date": null, "keywords": "absorber; area; dehydrator; drying; energy; solar; temperature; time", "summary": "Srivastava A., Sharma A., Kumar A., 2025, Performance evaluation of indirect solar drying system for potato slices: Comparative analysis with open-sun drying method. Goel V., Bhattacharyya S., Kumar R., Kumar-Pathak S., Tyagi V.V., Saini R.P., 2023, Identification of barriers and drivers to implementation of solar drying technologies.", "mime": "application/pdf"}, {"id": "cet-15636", "words": "3491", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15636", "date": null, "keywords": "bar; carbon; co2; corn; cost; equipment; fuel; process; production; spk; stover; syngas", "summary": "Corn stover, an abundant agricultural waste, presents an excellent renewable feedstock for SPK production, while simultaneously supporting agricultural waste management and sustainable fuel development. The required corn stover for this production is justified by the selection of Cagayan Valley in the Luzon region as the plant location, as it is the leading area for corn production in the Philippines.", "mime": "application/pdf"}, {"id": "cet-15637", "words": "3489", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15637", "date": null, "keywords": "biomass; gasification; process; reaction; reactor; simulation; steam; temperature", "summary": "Cao et al. (2019) also carried out biomass gasification reaction with air as the gasifying agent. Figure 1: Process flowsheet of biomass gasification simulation", "mime": "application/pdf"}, {"id": "cet-15638", "words": "3373", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15638", "date": null, "keywords": "combustion; electricity; gas; nh3; nox; production; simulation; system; utilization", "summary": "While conventional fuels produce thermal NOX through the oxidation of atmospheric nitrogen at high temperatures, NH3 combustion produces fuel NOX in addition to thermal NOX due to the oxidation of 73 nitrogen present within the fuel itself. To overcome the NOX emission challenge of NH3 combustion, this study focuses on the development and evaluation of a NOX capture and utilization system.", "mime": "application/pdf"}, {"id": "cet-15639", "words": "3029", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15639", "date": null, "keywords": "contaminant; cost; energy; freshwater; segregation; treatment; wastewater; water", "summary": "Nomenclature Z \u2013 total cost, $ EC \u2013 total energy costs, $ WC\u2013 total freshwater costs, $ XC\u2013 total water release costs, $ EP \u2013 cost per unit energy, $/kWh WP \u2013 cost per unit of freshwater, $/L XP \u2013 cost per released freshwater, $/L EDyn \u2013 energy used in dynamic segregation, kWh ETrt \u2013 treatment energy per period, $ X \u2013 utilization of fixed or dynamic segregation, binary FWt \u2013 introduced freshwater, L XWt \u2013 released freshwater, L Qipt \u2013 % allocation between sources and streams, Contamination from urban, agricultural, and industrial activities has further strained this limited supply, making wastewater treatment essential for environmental protection and water security.", "mime": "application/pdf"}, {"id": "cet-15640", "words": "3735", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15640", "date": null, "keywords": "application; cdr; cfp; co2; model; production; rate; rock; sinks; weathering", "summary": "\u2022 Given sources, each source i is characterized by its lower and upper annual rock crushing flow rate (Si L, Si U), operating lifespan (Li), CDR rate based on the material (Mi), and production CO2 penalty (Pi); \u2022 Given sinks, each sink j is characterized by its annual rock application limit to ensure that the application rate is within the sites\u2019 projected weathering rate as determined by average precipitation level (Dj), cumulative rock application limit over the entire project lifetime to ensure that the deposition of the silica co-product from weathering reactions is within sustainability limits to maintain soil quality (Gj). However, the analysis suggests diminishing returns as each incremental gain in CDR rate results in a smaller increase in net CDR because the associated production emissions also increase.", "mime": "application/pdf"}, {"id": "cet-15641", "words": "3291", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15641", "date": null, "keywords": "adsorption; amine; carbon; co2; material; teta", "summary": "Amine impregnation of MC increased the active sites for CO2 adsorption, which promotes CO2 adsorption. Adsorption of CO2 The effect of different TETA loadings on CO2 adsorption performance was investigated.", "mime": "application/pdf"}, {"id": "cet-15642", "words": "2920", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15642", "date": null, "keywords": "capital; cryptocurrency; electricity; energy; grid; investment; machine; mining; model; solar", "summary": "This study develops a deterministic optimization model to integrate solar energy into mining systems, aiming to maximize profitability while enhancing renewable energy utilization. Solar energy can be directly used for mining operations, stored in batteries for future use, or sold to the grid, while electricity from the grid supplements mining needs when necessary.", "mime": "application/pdf"}, {"id": "cet-15643", "words": "2958", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15643", "date": null, "keywords": "gasification; msw; plasma; plasma gasification; process; steam; syngas; waste", "summary": "Conventional gasification is cost-effective and suited for clean feedstocks but produces more impurities, while plasma gasification is more expensive yet cleaner, handling mixed waste with minimal emissions and producing high-purity syngas and inert slag. Plasma gasification enhances this process by utilizing a 4,000 \u00b0C plasma torch, which helps eliminate hazardous components and produces high-purity syngas.", "mime": "application/pdf"}, {"id": "cet-15644", "words": "3449", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15644", "date": null, "keywords": "input; iprn; model; plastic; production; recycling; substitution; waste", "summary": "A case study of an IPRN facing a shortage of plastic waste inputs shows that allowing input substitution can significantly improve the overall satisfaction level. Tan et al. (2022) used Pinch Analysis (PA) to match plastic waste inputs with suitable recycling techniques, while Aviso et al. (2023) used Linear Programming (LP) and Mixed-Integer Linear Programming (MILP) for similar optimization.", "mime": "application/pdf"}, {"id": "cet-15645", "words": "3587", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15645", "date": null, "keywords": "ammonia; biomass; boiler; coal; firing; flue; fuel; gas; temperature", "summary": "Decreasing coal co-firing ratio using either biomass or ammonia decreases nitrogen in the flue gas which indicates decrease of the required oxidizer. The feasibility of coal co-firing with biomass and ammonia will be explored by comparing fuel blends individually i.e. coal/biomass or coal/ammonia and simultaneously with coal/biomass/ammonia blends.", "mime": "application/pdf"}, {"id": "cet-15646", "words": "3800", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15646", "date": null, "keywords": "case; cost; emissions; energy; fuel; graph; pathway; plastic; pyrolysis; system; waste", "summary": "The increase in emissions avoidance was achieved solely by increasing the system throughput by 41 % of the existing configuration, which increases the production of syngas with high emissions avoidance potential. ISBN 979-12-81206-21-2; ISSN 2283-9216 Circular Integration of Electrified Plastic Waste-to-X Systems into Oil Refineries Adeline Shu Ting Tana, Soha Mousab, Dhabia Al-Mohannadic, Jui-Yuan Leed, Viknesh Andiappana, Bing Shen Howa,* a Research Centre for Sustainable Technologies, Swinburne University of Technology, Kuching, Malaysia b Chemical Engineering Program, Texas A&M University at Qatar, Doha, Qatar c Department of Chemical Engineering, Hamad Bin Khalifa University, Doha, Qatar d Department of Chemical Engineering, National Cheng Kung University, Taiwan, R.O.C. bshow@swinburne.edu.my The integration of plastic waste-to-X systems into the oil refineries offers a promising solution to the growing problem of plastic waste, while also supporting decarbonization by circulating plastic waste back into its supply chain as alternative feedstock.", "mime": "application/pdf"}, {"id": "cet-15647", "words": "4160", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15647", "date": null, "keywords": "cod; effluent; energy; et al; mill; oil; palm; pome; removal; treatment; wastewater", "summary": "Its effectiveness lies in its operating conditions that can be optimized to increase treatment efficiency and minimize operating costs (Nasrullah et al., 2022). Studies have shown that MAS can achieve high COD removal, with efficiencies ranging from 94 % (Hybat et al., 2019) to 98.4 % (Abdurahman et al., 2023).", "mime": "application/pdf"}, {"id": "cet-15648", "words": "3900", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-15648", "date": null, "keywords": "capture; co2; energy; model; plants; power; region", "summary": "Compared to Tan et al. (2010), which did not account for long-term RE reductions, this model offers a more robust strategy for retrofitting power plants with flexible CO2 capture options. Flexible CO2 capture involves the adjustment of the operating capacity of CO2 capture plant in response to the changing demand in energy (Gibbins and Crane, 2004).", "mime": "application/pdf"}, {"id": "cet-15649", "words": "4103", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15649", "date": null, "keywords": "chitosan; elongation; environmental; et al; film; glycerol; plastic; production; properties; pva; starch; strength; tensile", "summary": "Ayyubi et al. (2022) employed RSM-BBD multi- objective optimization to enhance biodegradable plastic strength while maintaining degradation properties. Biodegradable plastics offer a promising alternative to mitigate environmental impacts.", "mime": "application/pdf"}, {"id": "cet-15650", "words": "3479", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15650", "date": null, "keywords": "carbon; cdr; cost; durable; emissions; government; industry; model; removal", "summary": "In this work, we develop a bi-level mathematical program to model how government can use economic incentives to induce industry to select portfolios that favor durable CDR. Stackelberg or leader-follower games can be used to develop more effective government policies to induce greater use of durable CDR in industry.", "mime": "application/pdf"}, {"id": "cet-15651", "words": "4041", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15651", "date": null, "keywords": "additives; aggregates; ash; compressive; concrete; cost; et al; fly; properties; replacement; strength", "summary": "Effects of Additives and Partial Replacements on the Mechanical Properties of Concrete Fly ash is an industrial by-product that can reduce concrete costs compared to using only Portland cement clinker Moir (2003). Kurda R., de Brito J., Silvestre J.D., 2018, Combined economic and mechanical performance optimization of recycled aggregate concrete with high volume of fly ash.", "mime": "application/pdf"}, {"id": "cet-15652", "words": "4324", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15652", "date": null, "keywords": "demand; erosion; hydrological; management; model; philippines; soil; study; supply; swat; vic; water; watershed; weap", "summary": "Table 1: Overview of SWAT, WEAP, VIC, and WEPP Hydrological Models Soil and Water Assessment Tool Water Evaluation and Planning System Variable Infiltration Capacity Water Erosion Prediction Project Purpose/ Objective To evaluate the impacts of land management practices on water resources within watersheds To stimulate water resource systems To facilitate water and energy balance in land surface areas on a macro scale To predict and simulate water runoff, soil erosion, and sediment movement Components/Parameters Physical characteristics of watersheds Water supply and demand sites, physical characteristics of watersheds Soil and hydrologic parameters Soil and hydrologic parameters Focus Simulating long-term hydrological responses to various environmental conditions and management strategies Allows for the modelling of water supply and demand sites, and the interactions between them Assesses water resources and project groundwater conditions by simulating water and energy balances Provides insights into how sediment moves through landscapes under various conditions. The use of hydrological models can offer stakeholders valuable information such as water hydrology, assess future scenarios in water systems, and guide strategic water allocation and conservation.", "mime": "application/pdf"}, {"id": "cet-15653", "words": "3663", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15653", "date": null, "keywords": "approach; aviation; caf; cournot; firms; fuel; optimization; production; saf", "summary": "A game-theoretic study has been conducted by Uy et al. (2024), which looks into the government-industry interaction of SAF production firms, aiding the decision makers on which pathway to choose considering government incentives. Over the past six years, SAF production has risen from 1.9 M to 15.8 M gallons (Ozkan et al., 2024).", "mime": "application/pdf"}, {"id": "cet-15654", "words": "3601", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15654", "date": null, "keywords": "cost; emissions; hydrogen; model; plastic; production; purification; purity; pyrolysis; waste", "summary": "The model demonstrated that pyrolysis- steam reforming combined with PSA is capable of achieving hydrogen purity of 99.999 % with a highest overall satisfaction of 0.7141 (equivalent to total cost of 3.43 M$ and emissions of 528,647 kg CO\u2082/y) while pyrolysis- catalytic decomposition is more suitable to produce hydrogen with lower purity (55 %). are estimated using polynomial regression as shown in Eq(1) and Eq(2), where superscription Y and C on the right-hand side of the equations also denote hydrogen yield and hydrogen purity, respectively.", "mime": "application/pdf"}, {"id": "cet-15655", "words": "3355", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15655", "date": null, "keywords": "data; model; nozzle; reference; sensor; temperature", "summary": "179 Figure 4: PIV results for different nozzle cases at 180 s (upper) and 600 s (lower) 4. Temperature data for modeling were obtained from measurements in a vessel.", "mime": "application/pdf"}, {"id": "cet-15656", "words": "3945", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15656", "date": null, "keywords": "energy; heat; process; solar; storage; system; tank; temperature; water", "summary": "Thermal energy storage systems (TES) are an indispensable component of industrial solar thermal applications, ensuring a continuous supply to the process despite intermittent solar resources. The costs of storage systems depend on the installed capacity and supply time, as well as parameters such as the storage medium, tank and support structure, having an approximate cost of 20, 67 and 16 USD/kWh respectively (U. S. Department of Energy, 2022) for a 100 MW steam production plant and 8 h of operation.", "mime": "application/pdf"}, {"id": "cet-15657", "words": "3512", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15657", "date": null, "keywords": "carbon; electricity; emissions; energy; reduction; storage; system; technology; usd; \u2200\ud835\udc36\ud835\udc36", "summary": "Energy planning models are computational tools used to optimise energy systems and assess different energy scenarios (Akpahou et al., 2024). Most previous models also focus on employing low carbon energy generation technologies to minimise carbon emissions without considering the potential of incorporating carbon dioxide removal technologies as a pragmatic solution for emissions mitigation.", "mime": "application/pdf"}, {"id": "cet-15658", "words": "3844", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15658", "date": null, "keywords": "admm; cost; electricity; energy; model; network; p2p; peer; scheme; trading; \ud835\udc43\ud835\udc56,\ud835\udc61", "summary": "References Aminlou A., Hayati M., Zare K., 2024, ADMM-based fully decentralised Peer to Peer energy trading considering a shared CAES in a local community. In the operational layer, energy trading takes place.", "mime": "application/pdf"}, {"id": "cet-15659", "words": "3736", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15659", "date": null, "keywords": "analysis; carbon; cepa; demand; electricity; emission; energy; fuel; hydrogen; ktoe; supply", "summary": "This provides a more comprehensive assessment for targeting minimal carbon-emission energy transition options towards hydrogen energy, considering various types of energy supply and demand in the eco-industrial park. When there is an excess in energy supply (overlapping on the supply curve), the production of the energy supply type with the lowest priority in the AHP ranking should be reduced.", "mime": "application/pdf"}, {"id": "cet-15660", "words": "3069", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15660", "date": null, "keywords": "capture; co2; combustion; cryogenic; energy; fuel; lng; onboard; process", "summary": "Yao S., Li C., Wei Y., 2023, Design and optimization of a zero carbon emission system integrated with the utilization of marine engine waste heat and LNG cold energy for LNG-powered ships. Cryogenic CO2 capture offers a potential advantage, as it directly produces liquid CO2 suitable for onboard storage and later offloading.", "mime": "application/pdf"}, {"id": "cet-15661", "words": "3473", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15661", "date": null, "keywords": "charging; energy; heat; storage; stress; tank; temperature; thermocline; wall", "summary": "Elfeky K., Mohammed A.G., Ahmed N., Lu L., Wang Q., 2020, Thermal and economic evaluation of phase change material volume fraction for thermocline tank used in concentrating solar power plants. ISBN 979-12-81206-21-2; ISSN 2283-9216 Assessment of the Thermocline Thermal Energy Storage Tank Thermal Expansion Karem Elsayed Elfekya,*, Abubakar Gambo Mohammedb, Qiuwang Wangc, Kun Gea aCollege of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China bInstitute of Sustainable Energy, Universiti Tenaga Nasional, Putrajaya Campus, 43000 Kajang, Selangor, Malaysia cKey Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi\u2019an Jiaotong University, Xi\u2019an, Shaanxi 710049, P.R. China elfeky_karem@hrbeu.edu.cn A packed-bed thermocline tank offers a cost-effective solution for thermal energy storage in concentrating solar power (CSP) plants.", "mime": "application/pdf"}, {"id": "cet-15662", "words": "4018", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15662", "date": null, "keywords": "adoption; awareness; et al; factors; fishermen; government; insurance; malaysia; p&i; risk; rtp", "summary": "The findings revealed that government intervention, financial factors, risk perception and fishermen\u2019s attitude had a significant positive impact on RTP for P&I insurance, while insurance awareness did not show a notable impact. Based on the reviewed literature, this study proposes the conceptual framework shown in Figure 1 and formulates the following hypotheses: H1: There is a significant positive impact of insurance awareness and fishermen\u2019s RTP for P&I insurance.", "mime": "application/pdf"}, {"id": "cet-15663", "words": "3890", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15663", "date": null, "keywords": "co2; cycle; efficiency; flow; hydrogen; methanol; process; production", "summary": "To overcome these challenges, enhancing the economic feasibility and competitiveness of methanol production processes is essential. The primary goal was to enhance methanol production efficiency and address environmental concerns by reducing greenhouse gas emissions.", "mime": "application/pdf"}, {"id": "cet-15664", "words": "3440", "extension": ".pdf", "flesch": "24", "author": null, "title": "cet-15664", "date": null, "keywords": "allocation; capital; constraints; esg; firm; graph; green; investment; optimization; returns; sectors; structure", "summary": "This study pioneers the use of the P-graph for optimizing environmental investment. Using panel data from Chinese listed firms from 2011 to 2023, this study empirically estimates the marginal environmental returns of green investment across capital-, technology-, and labor-intensive sectors.", "mime": "application/pdf"}, {"id": "cet-15665", "words": "3729", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15665", "date": null, "keywords": "chuah; data; growth; malaysia; maritime; registration; seafarers; ship; shipping; study; vessels", "summary": "Section 3 delineates the study design, methodology and data collection while Section 4 provides an in-depth analysis of Malaysian ship registration and seafarer employment by evaluating the distribution of Malaysian seafarers across both domestic and foreign ships. This study builds upon the earlier work of Chuah et al. (2021) and specifically investigates the current status of Malaysian-registered ships under existing legislation 235 up to 2023, as well as the deployment patterns of Malaysian seafarers serving on both domestic and foreign- flagged ships.", "mime": "application/pdf"}, {"id": "cet-15666", "words": "3594", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15666", "date": null, "keywords": "biogas; carbon; co2; hydrogen; kmol; methanol; process; production; reactor; reforming", "summary": "This study presents a sustainable process for methanol production from biogas, integrating biogas upgrading, methane steam reforming and CO2 hydrogenation. Additionally, a sensitivity analysis was conducted for both methane reforming and catalytic methanol synthesis reactions, aiming to identify optimal parameters for maximizing methanol production.", "mime": "application/pdf"}, {"id": "cet-15667", "words": "3200", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15667", "date": null, "keywords": "carbon; ccs; flow; hub; network; production; sink; source; storage", "summary": "Given a set of carbon sources so, carbon sinks si, and a central carbon hub nt. As more emphasis is placed on carbon reductions in emerging economies, carbon sinks are being identified in these regions, which may only be ready for deployment years down the line or are limited in size.", "mime": "application/pdf"}, {"id": "cet-15668", "words": "3651", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15668", "date": null, "keywords": "blade; carbon; design; energy; footprint; performance; turbine; wind", "summary": "Blade performance\u2014heavily influenced by parameters like tip speed ratio (TSR), chord length, and twist distribution\u2014critically affects energy capture. This study aims to optimize blade design for small-scale HAWTs using a Genetic Algorithm (GA), targeting low- wind-speed Philippine conditions.", "mime": "application/pdf"}, {"id": "cet-15669", "words": "3060", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15669", "date": null, "keywords": "baffles; consumption; cr(vi; energy; mixing; reactor; reduction; removal; tubular", "summary": "Energy consumption analysis shows that the optimum balance between mixing energy and electrode power consumption is achieved at 300 rpm, resulting in a 13 % reduction in total energy consumption compared to previous studies. The research focuses on optimizing the internal geometry of the reactor, particularly the arrangement of tubular baffles, to improve flow patterns and minimize energy consumption.", "mime": "application/pdf"}, {"id": "cet-15670", "words": "3909", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15670", "date": null, "keywords": "capsules; energy; heat; melting; pcm; phase; spherical; storage; transfer", "summary": "In addition to optimizing the design of packed systems, many scholars have also conducted in-depth research on improving and optimizing the thermal storage unit (spherical phase change capsules). Mao Q., Zhang Y., 2020, Thermal energy storage performance of a three-PCM cascade tank in a high- temperature packed bed system.", "mime": "application/pdf"}, {"id": "cet-15671", "words": "3463", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15671", "date": null, "keywords": "adoption; consumption; efficiency; energy; firm; innovation; level; study; sustainability", "summary": "In particular, how AI adoption affects firm-level energy consumption, and through which mechanisms, has yet to be fully understood. These findings enrich the literature on AI- driven sustainability by clarifying how and under what conditions AI adoption contributes to improved energy efficiency.", "mime": "application/pdf"}, {"id": "cet-15672", "words": "3332", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15672", "date": null, "keywords": "acid; acrylic; chemical; cost; graph; process; production; steam; synthesis; wastewater", "summary": "(Pretel et al., 2014) 280 Objective Function: Max P = \u2211R\ud835\udc5a\ud835\udc4e\ud835\udc56\ud835\udc5b \ud835\udc5d\ud835\udc5f\ud835\udc5c\ud835\udc51\ud835\udc62\ud835\udc50\ud835\udc61 + \u2211R\ud835\udc4f\ud835\udc66\ud835\udc5d\ud835\udc5f\ud835\udc5c\ud835\udc51\ud835\udc62\ud835\udc50\ud835\udc61 \u2212 \u2211C\ud835\udc5f\ud835\udc4e\ud835\udc64 \ud835\udc5a\ud835\udc4e\ud835\udc61\ud835\udc52\ud835\udc5f\ud835\udc56\ud835\udc4e\ud835\udc59\ud835\udc60 \u2212 CAPEX \u2212 OPEX \u2212 \u2211C\ud835\udc62\ud835\udc61\ud835\udc56\ud835\udc59\ud835\udc56\ud835\udc61\ud835\udc56\ud835\udc52\ud835\udc60 \u2212 \u2211\ud835\udc47\ud835\udc4e\ud835\udc65\ud835\udc50\ud835\udc4e\ud835\udc5f\ud835\udc4f\ud835\udc5c\ud835\udc5b \u2212 \u2211C\ud835\udc64\ud835\udc4e\ud835\udc60\ud835\udc61\ud835\udc52 \ud835\udc61\ud835\udc5f\ud835\udc52\ud835\udc4e\ud835\udc61\ud835\udc5a\ud835\udc52\ud835\udc5b\ud835\udc61 \u2212 \u2211C\ud835\udc64\ud835\udc64 \ud835\udc61\ud835\udc5f\ud835\udc52\ud835\udc4e\ud835\udc61\ud835\udc5a\ud835\udc52\ud835\udc5b\ud835\udc61 (5) 3. Results and discussion The P-graph optimization selected the ethylene route as the most economically and environmentally balanced pathway for acrylic acid production, yielding an annual profit of USD 25.9 M (Figure 2). Conclusions This study demonstrated the benefit of the P-graph methodology for facilitating systematic decision-making in pathway selection and optimization in acrylic acid production.", "mime": "application/pdf"}, {"id": "cet-15673", "words": "3671", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15673", "date": null, "keywords": "dust; experimental; flow; gasification; model; paper; syngas", "summary": "This combined approach is crucial for bridging current knowledge gaps and enhancing the predictive understanding of paper dust gasification under varied operational conditions. The paper and paperboard industry generates substantial quantities of paper dust, an underutilized byproduct typically disposed of through incineration or landfilling, leading to environmental and economic inefficiencies.", "mime": "application/pdf"}, {"id": "cet-15674", "words": "3706", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15674", "date": null, "keywords": "activity; energy; foam; hydrogen; nickel; niznse; oxygen; ratio; reaction", "summary": "The shared electrons are trapped between the two atoms, providing a strong electrostatic attraction (Liu et al., 2023). RuO2 has higher activity than IrO2, but RuO2 is less stable than IrO2 (Lin et al., 2019).", "mime": "application/pdf"}, {"id": "cet-15675", "words": "3623", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15675", "date": null, "keywords": "collectors; flow; fouling; plate; temperature", "summary": "Several numerical studies have evaluated the thermal performance of different types of thermal solar collectors. Nedunchezhiyan et al. (2023) employed numerical simulations to analyze hybrid evacuated tube and flat plate solar collectors, examining the impact of different flow rates on velocity, pressure, temperature, and turbulent kinetic energy.", "mime": "application/pdf"}, {"id": "cet-15676", "words": "4192", "extension": ".pdf", "flesch": "23", "author": null, "title": "cet-15676", "date": null, "keywords": "data; digital; digitalisation; dmaic; ecosystem; implementation; industry; manufacturing; performance; process; technologies", "summary": "The findings suggest that the success of AI implementation is not determined solely by AI technologies but is also highly influenced by the organisation's level of digitalisation, sometimes referred to as digital maturity. Root causes such as fragmented and unstructured data, absence of real-time data flow, disconnected IT systems, and limited integration across digital platforms ultimately lead to the constrained ability of AI technologies to learn from reliable data and generate actionable insights in real-time (Peretz-Andersson et al., 2024).", "mime": "application/pdf"}, {"id": "cet-15677", "words": "3325", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-15677", "date": null, "keywords": "carbon; co2; emissions; footprint; fuel; graph; plastic; solution; supply; waste", "summary": "The conversion of plastic waste into fuel presents a sustainable solution to plastic pollution and fuel shortages. Case study This case study deals with the allocation of plastic waste subjected to demand constraints and environmental impact considerations.", "mime": "application/pdf"}, {"id": "cet-15678", "words": "3245", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15678", "date": null, "keywords": "airflow; co2; concentration; figure; inlet; room; site", "summary": "The model builds on prior validation from Estaquio et al. (2024), which used time-dependent simulations in a controlled indoor setting to match simulated airflow with anemometer data, confirm mesh independence, and reproduce CO2 concentration patterns from a sleeping occupant source. Mou et al. (2022) analyzed CO2 concentrations in a seminar room and emphasized the influence of occupant count and location on sensor placement.", "mime": "application/pdf"}, {"id": "cet-15679", "words": "3241", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15679", "date": null, "keywords": "biomass; boiler; case; coal; combustion; efb; emissions; firing; fuel; temperature", "summary": "2.3 Solid fuel properties The simulations used two solid fuels: Coal A and EFB biomass. Conclusions This study demonstrates that low-ratio co-firing of EFB biomass in a 300 MW coal-fired boiler can reduce emissions without exceeding operational limits.", "mime": "application/pdf"}, {"id": "cet-15680", "words": "3380", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15680", "date": null, "keywords": "chemical; combustion; crucible; furnace; gases; model; pet; process; recycling; temperature; waste", "summary": "Research has focused on exploring techniques such as PET combustion, but it has resulted in a complex process due to each plastics reacting differently when exposed to heat. Previous research has involved experiments on mechanical recycling (Bezaraj et al., 2025), PET combustion in combination with other fuels (Hu et al., 2024), plastic mixtures combustion (Mentes et al., 2023) and pyrolysis (Song et al., 2023), which only focus on reducing solid waste in the environment.", "mime": "application/pdf"}, {"id": "cet-15681", "words": "3211", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-15681", "date": null, "keywords": "adoption; carbon; emissions; energy; evs; philippines; vehicle", "summary": "This has profound implications for EV emissions, as the indirect emissions from charging remain linked to fossil fuel combustion unless cleaner power sources are prioritized. Table 1: Total carbon emissions in Mt CO2 for each scenario Year BAU (Ref) BAU Low EV BAU High EV CES Low EV 2020 59.924 59.924 59.924 59.924 2025 77.806 77.801 77.762 71.498 2030 96.313 96.230 96.044 76.489 2035 117.946 117.705 117.279 79.072 2040 142.896 142.513 141.765 78.191 Emissions of traditional cars were calculated as 281.2 gCO2-eq/km, with 260 gCO2/km (Fabian and Gota, 2009) and 0.08 g/km of NOx (DENR, 2015).", "mime": "application/pdf"}, {"id": "cet-15682", "words": "2772", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15682", "date": null, "keywords": "consumption; electric; energy; grade; gradients; performance; philippines; trike", "summary": "The study focuses on a 2 km radius around TODA stations with elevation variation analysis in assessing e-trike performance and it is randomly selected using GARMIN application from TODA stations to the diverse residential destinations. Lastly, the study recommended e-trike models from DOE\u2019s registered EV list if there are no e-trikes available in the area.", "mime": "application/pdf"}, {"id": "cet-15683", "words": "3201", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15683", "date": null, "keywords": "consumption; cycle; drive; energy; grades; kwh; road; terrain", "summary": "The study workflow of this research as shown in Figure 1, is based on the evaluation of the impact of road grade on EV energy consumption using drive cycle analysis. It demonstrates that road grades significantly increase EV energy consumption during drive cycle simulations.", "mime": "application/pdf"}, {"id": "cet-15684", "words": "3452", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15684", "date": null, "keywords": "analysis; carbon; energy; grid; irr; power; project; rate; tariff; wind", "summary": "Height of Anemometer Tower (m) 110 120 130 140 160 166 351 The assessment of wind energy resources in the region revealed the project area was particularly conducive to wind energy production. Currently, the oilfield is in the nascent stage of green power substitution (renewable energy power generation project).", "mime": "application/pdf"}, {"id": "cet-15685", "words": "3768", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-15685", "date": null, "keywords": "cel; cmc; conversion; csp; glucose; mna; nanoparticles; reaction; sorbitol", "summary": "In this work, the combination of Pd nanoparticles with Cel on the same functionalized magnetic substrate leads to the creation of a new bifunctional nanobiocatalyst, the properties of which were studied during the chemoenzymatic cascade conversion of carboxymethylcellulose (CMC) to D-sorbitol in a single reactor. Cellulases are a cocktail of three enzymes: endoglucanases, exoglucanases, and \u03b2-glucosidases, which are used to break various chemical bonds in cellulose (Sulman et al., 2022).", "mime": "application/pdf"}, {"id": "cet-15686", "words": "5030", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15686", "date": null, "keywords": "acid; biomass; cascade; catalysts; conversion; et al; nanoparticles; ratio; reactions; selectivity; size; zeolites", "summary": "Magyarov\u00e1, Z., Kr\u00e1lik, M., Sot\u00e1k, T., 2023, Utilization of zeolite catalysts in biomass exploitation: a mini review. An analysis of the review articles published to date shows that zeolite- based catalysts demonstrate outstanding potential for future industrial applications in biomass processing due to their unique BAS/LAS ratio (Bronsted acid sites /Lewis acid sites) and multifunctional active centres (Li et al., 2022b).", "mime": "application/pdf"}, {"id": "cet-15687", "words": "3549", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15687", "date": null, "keywords": "adsorption; ash; carbon; carbon concentrate; coal; concentrate; flotation; fly; particles; power; surface", "summary": "The fundamental mechanism of unburned carbon flotation is clearly illustrated in Ma et al. (2024) 368 Figure 2: Illustration of the mechanism of unburned carbon flotation (Ma et al., 2024)", "mime": "application/pdf"}, {"id": "cet-15688", "words": "3470", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15688", "date": null, "keywords": "carbon; dioxide; formaldehyde; hydrogen; samples; silica; sio2", "summary": "This process can be adapted to utilize carbon dioxide for the direct production of formaldehyde. Possible methods for utilizing carbon dioxide include the production of fuels (LeClerc et al., 2024) and valuable chemicals (Banerjee et al., 2016).", "mime": "application/pdf"}, {"id": "cet-15689", "words": "3125", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15689", "date": null, "keywords": "cdr; cost; decarbonization; emissions; model; period; plant; retrofit", "summary": "The second case study considers industrial decarbonization in Poland. Many optimization models have been proposed to support industrial decarbonization decisions (Tan et al., 2025).", "mime": "application/pdf"}, {"id": "cet-15690", "words": "2713", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15690", "date": null, "keywords": "carbon; distillation; energy; figure; heat; hpad; process; processes", "summary": "HPAD offers two benefits: (1) unlike conventional fossil-based heating methods, heat pumps operate solely on electricity and thus avoid direct GHG emissions during operation, achieving significant emission reductions; (2) in contrast to electric heaters, which provide heat energy using the same amount of electricity, heat pumps upgrade low-grade waste heat from the process to useful heat energy using a much smaller amount of electricity, significantly improving the overall energy efficiency of the process and reducing the overall energy consumption. With the rapid development of RES, the advantages of HPAD in improving conventional distillation processes are expected to become more pronounced, paving the way for its broader industrial application in the foreseeable future.", "mime": "application/pdf"}, {"id": "cet-15691", "words": "3606", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15691", "date": null, "keywords": "air; concentrations; floor; indoor; infiltration; levels; outdoor", "summary": "Similar observations were reported by Yulinawati et al. (2021), who highlighted the influence of room functions on indoor PM 2.5 accumulation in hospital environments. 394 Figure 4: Correlation plots of Indoor PM 2.5 concentrations versus Indoor Relative Humidity (%) for each floor level measured from November 12-23, 2024: (a) 1st Floor (2.5 m), (b) 2nd Floor (5 m), (c) 3rd Floor (8 m), and (d) 4th Floor (11 m).", "mime": "application/pdf"}, {"id": "cet-15692", "words": "3004", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15692", "date": null, "keywords": "bio; fractions; framework; oil; petroleum; properties; reconstruction", "summary": "Figure 2: Sensitivity of input parameters in bio-oil molecular composition reconstruction 401 The results indicate that, the vast majority of the sensitivity indices for the Gamma PDF shape parameters are extremely low, indicating that the internal shape differences of the carbon number distribution have a limited impact on macroscopic properties. Leveraging connectivity matrix-based molecular descriptors combined with artificial neural networks, accurate predictions of molecular properties are achieved.", "mime": "application/pdf"}, {"id": "cet-15693", "words": "4032", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-15693", "date": null, "keywords": "control; delay; digital; discrete; energy; event; graph; process; resource; scenario; sustainability; task; time", "summary": "A case study shows that the integration of traditional and sustainability control systems helps embed sustainability (Beusch et al., 2022), while research shows that control systems are only effective when formal design is aligned with users' values and practices (Johnstone, 2019). Optimised digital control processes (especially MPC and discrete-event) evidenced lower energy per unit output due to more efficient task scheduling, avoidance of idle resources, and minimisation of repetition and waste caused by bottlenecks.", "mime": "application/pdf"}, {"id": "cet-15694", "words": "3332", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15694", "date": null, "keywords": "equivalence; exc; exc exc; exc inc; inc inc; networks; operating; process; units", "summary": "412 Figure 4: Maximal structure for the 3-company industrial symbiosis case study, the red operating units representing the connections between companies are considered as critical Table 2: Existence of critical operating units in the strategically different feasible networks for the case study, \u201cInc\u201d indicates that the connection is included in the network, \u201cExc\u201d indicates that it is excluded Profit of best network in the equivalence class (M EUR/y) A \u2192 B Microalgae B \u2192 A Water A \u2192 C Diesel C \u2192 A CO2 C \u2192 B Wastewater C \u2192 B Heat Number of different networks in the equivalence class 6.826 Exc 3. Methodology Two important observations can be made: (i) for any given potential design network, the set of included critical operating units is unambiguous, and (ii) two network design options are strategically equivalent if they contain exactly the same set of critical operating units.", "mime": "application/pdf"}, {"id": "cet-15695", "words": "4107", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15695", "date": null, "keywords": "consumption; control; digital; emissions; energy; graph; management; mpc; process; processes; sustainability; task; time", "summary": "Egyetem sq., Gy\u0151r 9026, Hungary eisingerne@ga.sze.hu As institutions seek to reduce their environmental impact, administrative processes must be optimized for energy and resource efficiency. While Green BPM and LCA have supported sustainability in administrative processes, the integration of control strategies\u2014such as Model Predictive Control (MPC) or nonlinear feedback\u2014is still rare.", "mime": "application/pdf"}, {"id": "cet-15696", "words": "3047", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15696", "date": null, "keywords": "collector; data; figure; hybrid; layer; network; plant; temperature", "summary": "This represents an opportunity to analyse outlet temperature, improve the thermal and hydraulic performance of solar collector networks, and design a solar collector network. The use of neural networks will enable engineers to size, integrate, and control solar collector networks more precisely.", "mime": "application/pdf"}, {"id": "cet-15697", "words": "3185", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-15697", "date": null, "keywords": "heat; increase; number; pitch; transfer; tube; twist", "summary": "This study introduces a systematic approach for retrofitting tubular heat exchangers with twisted tubes, considering the tube twist pitch as a design variable. Twisted tubes enhance the thermal operation of shell and tube heat exchangers, which increases the overall heat transfer coefficient without significant pressure drop penalties.", "mime": "application/pdf"}, {"id": "cet-15698", "words": "3614", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15698", "date": null, "keywords": "carbon; cost; electrolysis; emissions; energy; hydrogen; optimization; production; smr; supply", "summary": "The economic viability of hydrogen supply chains is a central focus of research, as highlighted by Ibrahim and Al- Mohannadi (2023), who provide detailed economic and technical data for hydrogen production, conditioning, storage, and transportation. Hydrogen production, traditionally reliant on fossil fuel-based processes like SMR, generates substantial carbon dioxide (CO2), contributing to the environmental footprint of refineries.", "mime": "application/pdf"}, {"id": "cet-15699", "words": "2886", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15699", "date": null, "keywords": "baffles; cr(vi; energy; impellers; moud; reactor; reduction; time", "summary": "4. Conclusions The integration of modified impellers with tubular electro-baffles significantly enhances electrochemical reactor performance in both batch and continuous modes by improving mixing and reducing energy consumption. These results demonstrate that modified impellers significantly improve the efficiency and sustainability of electrochemical reactors for Cr(VI) treatment, providing a viable alternative to reduce the environmental impact of industrial discharges.", "mime": "application/pdf"}, {"id": "cet-15700", "words": "3616", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15700", "date": null, "keywords": "biomass; bubble; chlorella; column; cultivation; growth; microalgae; nutrient; pbr; photobioreactor; scale; vulgaris", "summary": "Among the various PBR types, bubble column photobioreactors (BCPBRs) have gained attention due to their simple design, low operational cost, efficient gas exchange, and relatively high mass transfer rates (Penloglou et al., 2024). 3.4 Determination of % yield of the microalgae inside the Bubble Column PBR The percent yield of Chlorella vulgaris biomass was determined using the initial and peak cell densities of 6.4 \u00d7 10\u2075 cells/mL and 5.95 \u00d7 10\u2076 cells/mL, respectively, resulting in a calculated biomass yield of approximately 930 %.", "mime": "application/pdf"}, {"id": "cet-15701", "words": "3891", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15701", "date": null, "keywords": "banana; camote; desiccant; dryer; drying; fsd; moisture; solar; sun; taro", "summary": "This is base from standard RH of drying chambers that is 30.1\u00b13.4 %. Results indicate that utilizing FSD in drying banana, camote and taro for storage and chipping is highly recommended since the method displayed high efficiency of drying, lower drying time rate and it also indicates a more hygienic method of drying compared to direct solar drying.", "mime": "application/pdf"}, {"id": "cet-15702", "words": "2901", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15702", "date": null, "keywords": "carbon; energy; gas; hydrogen; power; storage; system; t t", "summary": "i t F f t P t = = \uf0b4\uf0e5 (3) where , ( )om if t is the operation and maintenance cost coefficient (in RMB/kW) of equipment i at time t; ( )iP t is the output power of equipment iii at time t (kW/h); i represents wind power (w), photovoltaic (v), energy storage system (ess), electrolyzer (et), fuel cell (fc), hydrogen storage system (hss), hydrogen boiler (hb), and combined heat and power gas turbine (gt). Under these conditions, the system converts surplus electric energy into hydrogen energy through the electrolyzer, realizing the electric-to-hydrogen energy conversion and enhancing system operational flexibility.", "mime": "application/pdf"}, {"id": "cet-15703", "words": "3153", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15703", "date": null, "keywords": "battery; biomass; cost; energy; power; solar; storage; system", "summary": "Battery energy storage systems (BESS) are essential for ensuring stability and reliability. Introduction The utilization of battery energy storage systems (BESS) has been deemed of utmost importance as the world transitions towards increased implementation of renewable energy.", "mime": "application/pdf"}, {"id": "cet-15704", "words": "3529", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-15704", "date": null, "keywords": "coalition; energy; exchange; heat; hub; plant", "summary": "The unit costs of cold and hot utilities are represented by CUC ($/(kW\u2219y)) and HUC ($/(kW\u2219y)) while heat exchanger heat load is represented by qp,I,j,k,ts (kW) and area of the representative heat exchanger is represented as Ap,I,j,k (m2). 1. Introduction Heat integration in process plants can be used to reduce greenhouse gas emissions.", "mime": "application/pdf"}, {"id": "cet-15705", "words": "3688", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15705", "date": null, "keywords": "channels; diameter; exchangers; flow; heat; heat transfer; hydraulic; micro; transfer", "summary": "Marseglia G., De Giorgi M.G., Pontes P., Solipa R., Souza R.R., Moreira A.L.N., Moita A.S., 2024, Enhancement of microchannel heat sink heat transfer: Comparison between different heat transfer enhancement strategies. With such a large number of studies on heat transfer and friction in minichannels and microchannels, there are considerable differences in the results of experiments and the views on the applicability of conventional correlations.", "mime": "application/pdf"}, {"id": "cet-15706", "words": "2837", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15706", "date": null, "keywords": "concrete; plastic; process; solution; strength; temperature; tin; waste", "summary": "Introduction The rapidly increasing volume of electronic waste (e-waste) poses a significant environmental threat across the globe. Isildar A., Rene E.R., Van Hullebusch E.D., Lens P.N.L., 2018, Electronic waste as a secondary source of critical metals: Management and recovery technologies.", "mime": "application/pdf"}, {"id": "cet-15707", "words": "3428", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15707", "date": null, "keywords": "concrete; cullet; glass; increase; strength; waste", "summary": "ISBN 979-12-81206-21-2; ISSN 2283-9216 Utilisation of Silicate-Containing Waste in the Production of High-Density Concrete Darya K. Anopa, Olga V. Rudenkoa, Marzhan A. Sadenovaa,*, Natalya A. Kulenovaa, Nail A. Beisekenovb, Gulmira A. Baizakovaa, Anastassiya O. Lutaya, Alexandra V. Kolesnikovaa, Aidana K. Alimbaevaa aD. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, Ust-Kamenogorsk 070000, Kazakhstan bGraduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan msadenova@edu.ektu.kz The recycling of glass waste is an increasingly important challenge, as glass constitutes a valuable secondary raw material. This study investigates the use of glass waste as a partial replacement for fine aggregate in heavyweight concrete production, offering a sustainable solution to both construction material demand and municipal waste management.", "mime": "application/pdf"}, {"id": "cet-15708", "words": "3489", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-15708", "date": null, "keywords": "ash; blocks; concrete; density; laboratory; results; samples; strength", "summary": "The conversion from the strength and density of aerated concrete samples at the time control point to the strength and density of industrial samples using the coefficients is shown in Figure 5. Then the coefficient of transition from the strength and density of aerated concrete samples at the time control point to the strength and density of industrial samples was determined.", "mime": "application/pdf"}, {"id": "cet-15709", "words": "4179", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15709", "date": null, "keywords": "building; case; efficiency; energy; envelope; heat; heating; method; study; wall", "summary": "The proposed methodology for processing the results of thermal imaging inspection of a building is aligned with the method of sequential improvement of building energy system presented by Polyvianchuk et al. (2025), and firstly requires the determination of the initial parameters of the energy, environmental and economic state of the observed building, namely: the annual demand for thermal energy \u2013 \ud835\udc5e (and specific heat consumption \ud835\udc5e\ud835\udc60 taking into account the total heating area \ud835\udc46\u210e\ud835\udc52\ud835\udc4e\ud835\udc61\ud835\udc56\ud835\udc5b\ud835\udc54); fuel consumption (natural gas is considered) \ud835\udc49\ud835\udc53\ud835\udc62\ud835\udc52\ud835\udc59 ; pollutant emissions \ud835\udc5a\ud835\udc36\ud835\udc422 , \ud835\udc5a\ud835\udc41\ud835\udc42\ud835\udc65 ; expenditure of financial resources for heating \ud835\udc53\u210e\ud835\udc52\ud835\udc4e\ud835\udc61. = \ud835\udc5e\ud835\udc52\ud835\udc5b_\ud835\udc60\ud835\udc61\ud835\udc5f\ud835\udc62\ud835\udc50\ud835\udc61\ud835\udc62\ud835\udc5f\ud835\udc52\ud835\udc60 + \ud835\udc5e\ud835\udc56\ud835\udc5b\ud835\udc53 + \ud835\udc5e\ud835\udc61\ud835\udc62\ud835\udc4f\ud835\udc52\ud835\udc60_\ud835\udc56\ud835\udc5b + \ud835\udc5e\ud835\udc3b\ud835\udc4a\ud835\udc46 \u2212 \ud835\udc58\ud835\udc5f\ud835\udc52\ud835\udc54 \u22c5 (\ud835\udc5e\ud835\udc56\ud835\udc5b\ud835\udc51\ud835\udc5c\ud835\udc5c\ud835\udc5f_\u210e\ud835\udc52\ud835\udc4e\ud835\udc61 + \ud835\udc5e\ud835\udc60\ud835\udc5c\ud835\udc59\ud835\udc4e\ud835\udc5f_\u210e\ud835\udc52\ud835\udc4e\ud835\udc61) (1) where \ud835\udc5e\ud835\udc52\ud835\udc5b_\ud835\udc60\ud835\udc61\ud835\udc5f\ud835\udc62\ud835\udc50\ud835\udc61\ud835\udc62\ud835\udc5f\ud835\udc52\ud835\udc60 is the thermal energy loss by the building envelope through the enclosure structures, Wh; \ud835\udc5e\ud835\udc56\ud835\udc5b\ud835\udc53 is the thermal energy loss of the building due to infiltration, Wh; \ud835\udc5e\ud835\udc61\ud835\udc62\ud835\udc4f\ud835\udc52\ud835\udc60_\ud835\udc56\ud835\udc5b is the heat losses from the external 500 surfaces from pipelines of internal heating system and/or hot water system (HWS), and closed regulation valves installed on the pipelines in unheated rooms, Wh; \ud835\udc5e\ud835\udc3b\ud835\udc4a\ud835\udc46 is the heat losses from the equipment for HWS preparation, such as boilers and heat exchangers, Wh; \ud835\udc58\ud835\udc5f\ud835\udc52\ud835\udc54 is the coefficient, which indicates the presence (\ud835\udc58\ud835\udc5f\ud835\udc52\ud835\udc54 = 1) or absence (\ud835\udc58\ud835\udc5f\ud835\udc52\ud835\udc54 = 0) of an automated \u201csmart\u201d control heating system, non-dimensional; \ud835\udc5e\ud835\udc56\ud835\udc5b\ud835\udc51\ud835\udc5c\ud835\udc5c\ud835\udc5f_\u210e\ud835\udc52\ud835\udc4e\ud835\udc61 is the amount of thermal energy released by internal heat sources, such as heat from people or electronics, Wh; \ud835\udc5e\ud835\udc60\ud835\udc5c\ud835\udc59\ud835\udc4e\ud835\udc5f_\u210e\ud835\udc52\ud835\udc4e\ud835\udc61 is the amount of thermal energy entering the building due to the solar radiation through external enclosing structures, Wh.", "mime": "application/pdf"}, {"id": "cet-15710", "words": "3653", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-15710", "date": null, "keywords": "emissions; energy; energy management; framework; ghg; iso; management; performance; sustainability; systems", "summary": "Energy management plays a critical role in reducing greenhouse gas (GHG) emissions and promoting renewable energy by identifying inefficiencies in energy use and enabling targeted interventions (Monjurul Hasan and Trianni, 2020), thereby reinforcing the need to integrate energy management practices with GHG emissions strategies. However, most GHGMS are not operationally linked to energy management systems, although energy-related emissions, particularly from fuel combustion and electricity use, account for the largest share of reported GHGs.", "mime": "application/pdf"}, {"id": "cet-15711", "words": "3092", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15711", "date": null, "keywords": "energy; hydrogen; methanol; model; power; production; scheduling; system; t t; wind", "summary": "Wiser R., Bolinger M., Lantz E., 2019, Assessing wind power operating costs in the United States: Results from a survey of wind industry experts. Photovoltaic Power Generation Wind Power Generation Electrolyzer Methanol Production Methanol Sales Power Grid CO2 Electric Power Flow Hydrogen Flow CO2 Flow Methanol Flow Hydrogen Sales Figure 1: The structural diagram of the GEHMIS 2.1 System mathematical models The study establishes a a wind\u2013solar\u2013hydrogen\u2013methanol model and enables interaction with the power grid.", "mime": "application/pdf"}, {"id": "cet-15712", "words": "3815", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15712", "date": null, "keywords": "control; dynamics; process; project; sessions; simulation; students; task; unit", "summary": "Given its importance, there is a notable need for more professionals with experience in process dynamics simulation. Process dynamics simulation has been taught in chemical engineering curriculums over the years, typically in units that focus on teaching process control.", "mime": "application/pdf"}, {"id": "cet-15713", "words": "3348", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15713", "date": null, "keywords": "bod; chemical; clarifier; cod; cost; graph; pharmaceutical; treatment; tss; wastewater", "summary": "While the P-graph method has been applied in previous studies to general wastewater treatment by Yenkie et al. (2021) and tannery wastewater by Aboagye et al. (2021), its application to pharmaceutical wastewater treatment remains largely unexplored. Figure 1: Stage wise structure of pharmaceutical wastewater treatment used in this project with its abbreviation.", "mime": "application/pdf"}, {"id": "cet-15714", "words": "3838", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15714", "date": null, "keywords": "components; cost; cycle; et al; geothermal; power; r134a; sco2; use", "summary": "For these reasons, combined modifications were introduced and assessed in the sCO2 binary cycle with preheating, reheating and intermediate heat transfer through which ~12 % cost reduction was achieved, covering a significant part of the cost difference between the two working fluids. Finally, modifications were introduced in the sCO2 binary cycle with the use of preheating, reheating and intermediate heat transfer which led to ~12 % cost reduction and more than 25 % relative efficiency increase covering a significant part of the cost difference in relation to R134a.", "mime": "application/pdf"}, {"id": "cet-15715", "words": "4242", "extension": ".pdf", "flesch": "32", "author": null, "title": "cet-15715", "date": null, "keywords": "efficiency; energy; energy poverty; greece; households; income; indicators; poverty; programs; subsidies", "summary": "Nevertheless, when the average disposable income is considered -alongside the geographical distribution of heating allowances and the percentage of recorded energy poverty- a serious inconsistency becomes evident in the targeting of support measures: regions with higher energy poverty get more generous heating subsidies (i.e. Western Macedonia, North Aegean, and Epirus, where over 25 % of households face energy poverty, receive the highest support, between \u20ac 335 - \u20ac 350 per year) At the level of household is mainly expressed by the concept of energy poverty, also referred to as fuel poverty, which is widely defined in the literature as the \u201cinability of a household to secure adequate access to essential energy services, such as heating, cooling, and electricity\u201d.", "mime": "application/pdf"}, {"id": "cet-15716", "words": "3116", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15716", "date": null, "keywords": "air; condenser; flow; heat; mass; pressure; steam; transfer; water", "summary": "Steam Hot air Hot mixture (Steam + Hot air) Cold air Mass flow (kg/hr) 83 323 406 3,800 Reynolds number - - 6,900 1,960 Inlet temperature (K) 376 299 342 289 Water mass fraction - - 0.204 - Total pressure drop (%) - - 6.5 0.64 Water recovery (%) - - 71 - The condensate mass flow rate was determined experimentally using an electronic scale, which recorded the real-time mass of the condensed water exiting the system. The following results were measured using the maximum steam, hot air and cold air mass flow rates and they were intended to compare the experimental outlet condensate flow rate with the estimation from the thermodynamic model, in order to assess the accuracy of the experimental measurements on the heat transfer.", "mime": "application/pdf"}, {"id": "cet-15717", "words": "2928", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15717", "date": null, "keywords": "bypass; cooling; engine; fdp; free; heat; management; model; piston", "summary": "A parametric analysis is performed to investigate the effects of various material properties and bypass air heat transfer coefficients on overall thermal efficiency. Chapman et al. (2020) discussed the development of thermal management systems for electrified aircraft, addressing the challenges posed by increased thermal loads.", "mime": "application/pdf"}, {"id": "cet-15718", "words": "3970", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15718", "date": null, "keywords": "eae; enzyme; et al; extraction; food; high; material; methods; pectin; pectin extraction; quality", "summary": "Table 1 summarizes some of the high-efficiency examples of EAE for pectin extraction, arranged by decreasing pectin yield. This mini review provides an overview of pectin extraction via EAE, presenting the extraction procedure and key parameters, including raw material types, operating conditions, and enzymes used.", "mime": "application/pdf"}, {"id": "cet-15719", "words": "3495", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15719", "date": null, "keywords": "ammonia; bar; cost; decomposition; energy; et al; hydrogen; process; production", "summary": "However, these studies did not include hydrogen compression costs for refueling applications. Several techno-economic studies have assessed ammonia decomposition for hydrogen production, with reported costs varying depending on plant scale and system configuration.", "mime": "application/pdf"}, {"id": "cet-15720", "words": "2715", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15720", "date": null, "keywords": "effectiveness; gwh\u00b7y-1; heat; load; ntu; solar; transfer; \ud835\udc47\ud835\udc56\ud835\udc5b", "summary": "The proposed relationship can support preliminary sizing of solar thermal networks, providing a fast alternative to detailed simulations, with future work aimed at extending its validation to different climatic and operational contexts. Yet, its application to solar thermal networks has received little attention, likely due to the unsteady and time-dependent nature of solar input.", "mime": "application/pdf"}, {"id": "cet-15721", "words": "3970", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15721", "date": null, "keywords": "biomass; carbon; cost; electrolysis; emissions; energy; gasification; hydrogen; hydrogen production; production; public; technologies", "summary": "Previous studies indicate that hydrogen production costs from biomass gasification can be as low as 2.68 USD/kg, positioning it as a more economical option than water electrolysis under current conditions (Tanyi et al., 2024). This review provides a brief analysis of hydrogen production technologies, primarily electrolysis, steam methane reforming (SMR) with carbon capture and storage (CCS), and biomass gasification through the lens of techno-economic assessment, sustainability, environmental metrics, and social impact.", "mime": "application/pdf"}, {"id": "cet-15722", "words": "2488", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-15722", "date": null, "keywords": "carbon; composites; gypsum; mass; materials; properties; structure", "summary": "The studies of structural changes in gypsum composites with porous fillers were conducted using four gypsum- based compositions (Table 1). The results of the studies of the structure of gypsum composites are presented in Figures 2 \u2013 6.", "mime": "application/pdf"}, {"id": "cet-15723", "words": "3544", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-15723", "date": null, "keywords": "acid; base; concentration; electrodialysis; hcl; hydroxide; membranes; naoh; production; sodium; solution", "summary": "Bipolar membrane electrodialysis for generation of hydrochloric acid and ammonia from simulated ammonium chloride wastewater. For electrical potentials of 5 and 15 volts, hydrochloric acid concentrations of 0.035 and 0.098 M are achieved.", "mime": "application/pdf"}, {"id": "cet-15724", "words": "3597", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15724", "date": null, "keywords": "apparatus; class; directive; establishments; et al; management; number; ontology; safety; seveso", "summary": "The ontology for Seveso establishments The application of the methodology summarised in Section 2 permitted obtaining a novel ontology to support safety management in industrial Seveso establishments by addressing the various actors, organisations, equipment, processes, and their interactions prescribed by the Directive and occurred in an industrial setting. This paper has proposed a new ontology to support safety management in industrial Seveso establishments handling dangerous substances.", "mime": "application/pdf"}, {"id": "cet-15725", "words": "4121", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15725", "date": null, "keywords": "accessibility; analysis; management; miguel; mobility; policies; safety; san; strategies; transport", "summary": "For the dimension execution of sustainable mobility policies, the officials showed a moderately high level, in the analysis it was found that the implemented policies showed an average of 2.43, the compliance with implementation deadlines obtained an average value of 3.43 and the effectiveness in improving sustainable mobility was 3.86. So far, the results reflect that management strategies in San Miguel have a significant impact on aspects leading to universal accessibility, efficiency, safety, and environmental sustainability for compliance with the Sustainable Development Goals (SDG), actions that improve road infrastructure, promote clean technologies and promote a modern transportation system help in the transition to sustainable mobility (Sustainable Mobility for All, 2019).", "mime": "application/pdf"}, {"id": "cet-15726", "words": "4575", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15726", "date": null, "keywords": "coating; deposition; et al; film; kalafatis et; material; spin; substrate; thickness; tyona", "summary": "In addition to surface characterization, film thickness is a crucial parameter for evaluating coating quality. Figure 2 \u2013 Representations of spin coated films: (a) no visible defects; (b) grains; (c) pinholes; (d) incomplete coverage; (e) uneven thickness; (f) streaks; (g) rotor mark and (h) thick edges.", "mime": "application/pdf"}, {"id": "cet-15727", "words": "3336", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-15727", "date": null, "keywords": "aluminum; coffee; current; doi; electrocoagulation; electrodes; iron; removal; treatment; wastewater", "summary": "Electrocoagulation with Al and Fe electrodes has demonstrated removal efficiencies of up to 82.7% and 72.7% TOC in batch and semicontinuous modes, confirming its potential for wastewater treatment (Sandoval et al., 607 mailto:yfazabache@unsm.edu.pe 2024). References Akinnawo S.O., Ayadi P.O., Oluwalope M.T., 2023, Chemical coagulation and biological techniques for wastewater treatment, Ovidius University Annals of Chemistry, 34(1), 14\u201321.", "mime": "application/pdf"}, {"id": "cet-15728", "words": "3546", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15728", "date": null, "keywords": "climate; emissions; energy; energy poverty; index; indicators; member; policy; poverty", "summary": "To address this, the EPEI index was developed, linking energy poverty indicators with greenhouse gas emissions and climate policy engagement, offering a three- dimensional view of energy poverty, ecological footprint, and climate policy responses. Exploring Complex Drivers and Cross-Dimensional Impacts Judit P\u00e9csinger*,a, D\u00f3ra Siposa, Gergely Zolt\u00e1n Machera, \u00c9va Veronika Pestin\u00e9 R\u00e1czb aDepartment of Applied Sustainability, Sz\u00e9chenyi Istv\u00e1n University, Egyetem t\u00e9r 1, 9026 Gy\u0151r, Hungary bDepartment of Mathematics and Physics, Sz\u00e9chenyi Istv\u00e1n University, Egyetem t\u00e9r 1, 9026 Gy\u0151r, Hungary pecsinger.judit@sze.hu Energy poverty remains one of the key obstacles to sustainable development, directly affecting households and increasingly influencing business operations as well.", "mime": "application/pdf"}, {"id": "cet-15729", "words": "3725", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-15729", "date": null, "keywords": "co\u2082; emission; energy; expansion; family; firms; food; intensity; mwh; sustainability", "summary": "To this end, it integrates three methodological approaches: LMDI analysis to identify internal drivers of CO\u2082 emissions, OECD benchmarking to evaluate external performance in terms of energy and carbon intensity, and a CFGLS regression to explore the interrelationships among CO\u2082, NO\u2093, and energy use. 2.2 Measurements, values, and units As a first component of the analysis proposed, the Logarithmic Mean Divisia Index (LMDI) method was employed to decompose year-on-year changes in CO\u2082 emissions into three factors: production volume, energy intensity, and emission factor.", "mime": "application/pdf"}, {"id": "cet-15730", "words": "3350", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15730", "date": null, "keywords": "chain; network; node; organization; plasticity; production; resilience; supply; team", "summary": "ISBN 979-12-81206-22-9; ISSN 2283-9216 How to Create Organizational Resilience and Adaptability Through Embedded Plasticity-Rigidity Cycles Istv\u00e1n Fekete*,a, Tam\u00e1s Hartv\u00e1nyib aFETIM-CONS Kft., 2310, Szigetszentmiklos, Hungary bSz\u00e9chenyi Istv\u00e1n University, Department of Logistics and Forwarding, Egyetem t\u00e9r 1, 9026 Gy\u0151r, Hungary fekete.istvan.pic@gmail.com This paper explores how organizational network structures influence cascading failure propagation and how embedded plasticity\u2013rigidity cycles can create resilience and adaptability. One of the fundamental reasons for the increased sensitivity of supply chain networks is the growing interconnectedness of networks (Csermely, 2015).", "mime": "application/pdf"}, {"id": "cet-15731", "words": "4367", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15731", "date": null, "keywords": "aeration; demand; energy; operation; plantation; poplar; treatment; wastewater; wine; winery; wtp", "summary": "High organic wastewater from winery operation increases energy use by over 50 %. The carbon footprint of wastewater treatment plants is significant; the processes are energy- intensive and thus high CO2 emitters.", "mime": "application/pdf"}, {"id": "cet-15732", "words": "2975", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15732", "date": null, "keywords": "basin; data; groundwater; model; modflow; rainfall; recharge; wells", "summary": "The calibrated model was used to simulate groundwater dynamics over 4 y (March 2020 \u2013 March 2024), highlighting spatial and temporal variations in groundwater levels in response to rainfall. A clear and consistent seasonal fluctuation in groundwater levels was observed throughout the simulation.", "mime": "application/pdf"}, {"id": "cet-15733", "words": "3657", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15733", "date": null, "keywords": "cm\u207b\u00b9; danube; mesoplastics; plastic; river; sampling; vibration; waste; water", "summary": "Analysis of water samples from the same area confirmed the presence of polyethylene (PE) and polypropylene (PP), the most widely produced commodity plastics. The low PET content in water samples, despite its dominance in shoreline waste, may be explained by differing sources and transport pathways between land and river environments.", "mime": "application/pdf"}, {"id": "cet-15734", "words": "4080", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-15734", "date": null, "keywords": "changes; countries; covid-19; data; doi; food; food waste; generation; pandemic; production; values; waste", "summary": "The data analysis revealed that the total amount of food waste did not undergo significant changes during the 2020-2022 period. The proportion of food waste from retail and other food distribution channels, as well as restaurants and food services, exhibited a steadily increasing trend over the study period.", "mime": "application/pdf"}, {"id": "cet-15735", "words": "3693", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15735", "date": null, "keywords": "bct; boxes; compression; corrugated; doi; moisture; packaging; strength; water", "summary": "Baker M., Horv\u00e1th L., White M.S., 2016, Effect of pallet deckboard stiffness on corrugated box compression strength. This study aims to examine whether corrugated boxes that have been exposed to water and subsequently dried can retain sufficient compression strength to allow for safe use.", "mime": "application/pdf"}, {"id": "cet-15736", "words": "4219", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15736", "date": null, "keywords": "companies; competitiveness; enterprises; hungarian; number; operating; performance; reporting; sustainability; \ud835\udc38\ud835\udc35\ud835\udc47; \ud835\udc46\ud835\udc41\ud835\udc45", "summary": "The weight of Hungarian agricultural enterprises in the national economy According to the Hungarian Central Statistical Office (KSH) (2024), the number of agricultural enterprises has been declining steadily in recent years. This study examines the economic and financial performance of a sample of Hungarian agricultural enterprises between 2019 and 2023, with particular emphasis on the rate of sustainable development.", "mime": "application/pdf"}, {"id": "cet-15737", "words": "4220", "extension": ".pdf", "flesch": "65", "author": null, "title": "cet-15737", "date": null, "keywords": "jobs; machine; problems; rdl; type", "summary": "Chen S., Zheng J., 2024, Hybrid grey wolf optimizer for solving permutation flow shop scheduling problem. As in the well-known benchmark of Taillard (1993) for flow shop problems, the processing times of the jobs were random integers chosen from the uniform distribution in the range [1,100].", "mime": "application/pdf"}, {"id": "cet-15738", "words": "3799", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-15738", "date": null, "keywords": "carbon; categories; energy; hungary; hydrogen; hydrogen production; impact; life; production; strategy; technologies", "summary": "This study aims to address this research gap by providing comprehensive environmental assessments of hydrogen production mixes projected in the Hungarian Hydrogen Strategy, offering additional insights into the environmental burdens associated with hydrogen production. Hydrogen production technologies are categorised by colour labels based on the primary energy sources used, associated costs, emissions, and technological specifics (Arcos and Santos, 2023).", "mime": "application/pdf"}, {"id": "cet-15739", "words": "3696", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15739", "date": null, "keywords": "capita; consumption; data; doi; electricity; energy; lighting; losses; pollution", "summary": "The analysis focuses on municipality-level data across the three counties of the Western Transdanubia region (Gy\u0151r-Moson-Sopron, Vas, and Zala), examining public lighting electricity consumption, permanent population figures, and per capita electricity demand for public lighting. Therefore, a closer examination of public lighting energy consumption through the lens of spatial equity and infrastructural geography is essential.", "mime": "application/pdf"}, {"id": "cet-15740", "words": "4008", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-15740", "date": null, "keywords": "binder; et al; fff; materials; peg; pla; temperature; water", "summary": "As additive manufacturing continues to expand into high-performance applications, the demand for sustainable, high- functionality support and binder materials is expected to grow, driving further innovation in the field. Thermal properties comparison of binder materials (solubility, melting temperature, printing temperature, and thermal degradation temperature)", "mime": "application/pdf"}, {"id": "cet-15741", "words": "3979", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-15741", "date": null, "keywords": "bim; building; construction; cycle; design; energy; integration; life; modelling; optimisation; parametric; sustainability", "summary": "This study explores how parametric modelling and BIM can be integrated to support sustainable building design and practices. The integration of the two methods, i.e., the BIM-based application of the parametric approach, opens up new possibilities for sustainable building design.", "mime": "application/pdf"}, {"id": "cet-15742", "words": "3414", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-15742", "date": null, "keywords": "collection; deposit; doi; drs; packaging; participation; producer; retailers; system; waste", "summary": "For small Asian retailers operating with minimal margins, the decision to adopt the DRS constitutes a complex risk assessment, where the perceived operational burden is significantly increased by their limited resources. This study explores the perspectives of small Asian retailers in Hungary regarding voluntary participation in DRS, focusing on their willingness, ability, and influencing factors to participate.", "mime": "application/pdf"}, {"id": "cet-15743", "words": "4291", "extension": ".pdf", "flesch": "31", "author": null, "title": "cet-15743", "date": null, "keywords": "als; cloud; data; density; management; methods; models; monitoring; point; resource; scale; sustainability; upsampling", "summary": "Figure 1: Conceptual workflow of ALS point cloud upsampling from data acquisition to derived products and decision support (Source: own creation) 93 3. This manuscript examines using point cloud upsampling as part of environmental monitoring.", "mime": "application/pdf"}, {"id": "cet-15744", "words": "4257", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-15744", "date": null, "keywords": "cloud; data; datasets; density; green; infrastructure; management; planning; point; upsampling; urban", "summary": "PC data facilitates the measurement of key ecological indicators such as tree canopy height, vegetation density, and Leaf Area Index (LAI), all of which are critical for the health and functional assessment of urban green infrastructure (D\u00edaz- Varela and Gonz\u00e1lez-Ferreiro, 2021). Unaddressed, low-quality PC data might lead to underestimation of canopy cover, misclassification of land cover types, or even failure to detect critical vulnerabilities in urban green infrastructure if it is not properly managed.", "mime": "application/pdf"}, {"id": "cet-15745", "words": "4684", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15745", "date": null, "keywords": "chemistry; documents; framework; future; international; law; manual; unep", "summary": "Soft law documents provide flexible solutions Due to the easy and fast creation process, soft law documents can undoubtedly provide a flexible solution to issues that require urgent action, and they can help to adapt to new situations and technological developments (Walter et al., 2011). Soft law documents are not legally binding As it was already mentioned, soft law documents do not contain exact rights and obligations.", "mime": "application/pdf"}, {"id": "cet-15746", "words": "3492", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15746", "date": null, "keywords": "anaerobic; bags; biogas; collection; digestion; kitchen; methane; paper; plastic; waste; yields", "summary": "Dolci G., Venturelli V., Catenacci A., Ciapponi R., Malpei F., Turri S.E.R., Grosso M., 2022, Evaluation of the anaerobic degradation of food waste collection bags made of paper or bioplastic. Under the Waste Framework Directive, selective collection of bio-waste became mandatory by 31 December 2023, leading to the widespread introduction of collection liners and tools \u2013 typically biodegradable plastics, paper bags, or reusable containers \u2013 to support logistics and hygiene during household collection.", "mime": "application/pdf"}, {"id": "cet-15747", "words": "3517", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15747", "date": null, "keywords": "handling; item; layout; model; simulation; storage; strategy; systems; warehouse", "summary": "2.4 Simulation and Performance Evaluation Using Fuzzy Logic Simulation models are essential tools for evaluating warehouse system performance, as they allow for testing various layouts, rules, and scenarios without the risk or cost of real-world disruptions. Figure 1: Goods in warehouse model (a) Bar chart illustrating the Pareto principle; (b) Visualization of a randomly generated layout for the 3-deep warehouse configuration 3.2 Warehouse Layout", "mime": "application/pdf"}, {"id": "cet-15748", "words": "4777", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15748", "date": null, "keywords": "adsorption; capture; carbon; carbon capture; chemical; co2; co\u2082; doi; efficiency; energy; gas; membrane; processes; separation; technologies", "summary": "4. Results The analysis of the selection criteria indicates that the applicability of carbon capture technologies primarily depends on the CO\u2082 concentration of the gas stream, the energy required for separation and regeneration, and the presence of impurities. Conclusions and further research steps The suitability and implementation of carbon capture technologies are highly dependent on several key factors, including the specific application, the concentration of CO2 in the gas mixture, the chemical composition of the CO2 environment (e.g., presence of water vapor, acidic substances, and solid particles), and the prevailing physical conditions such as temperature and pressure (Thiedemann and Wark, 2025).", "mime": "application/pdf"}, {"id": "cet-15749", "words": "4080", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-15749", "date": null, "keywords": "climate; conditions; erosion; flood; flow; groundwater; hydraulic; levee; rainfall; sand; seepage; stability", "summary": "5.3 Evaluation of mitigation measures for levee stability Subsurface cutoff walls (Figure 4a) effectively control levee seepage, with the 14\u202fm sheet pile wall performing best by reducing the hydraulic gradient to 0.00288, groundwater flow to 0.2099\u202fm\u00b3/day, and displacement to 0.02565\u202fm. Saturation remained concentrated upstream, confirming effective seepage management. These changes increase erosion, seepage, and hydrodynamic pressures, threatening levee stability.", "mime": "application/pdf"}, {"id": "cet-15750", "words": "3283", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-15750", "date": null, "keywords": "blockchain; chain; communication; doi; management; supply; supply chain; sustainability; technologies; tools", "summary": "The research advances the state of the art by conducting a thorough review of 102 papers for a systematic literature review and found technologies such as blockchain, AI, ERP, and cloud systems, which can be used to support supply chain sustainability. The study aims to address the gap by scientifically examining how digital tools play a significant role in B2B supply chain sustainability.", "mime": "application/pdf"}, {"id": "cet-15751", "words": "3775", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-15751", "date": null, "keywords": "arduino; data; engineering; irrigation; moisture; sensor; soil; soil moisture; system; water; weather", "summary": "A practical comparison was conducted between a conventional irrigation system (based on a fixed schedule) and a proposed fusion system that integrates soil moisture data with weather forecasts. This weather data is combined with soil moisture sensor readings in a Hybrid Fusion Algorithm, which checks both current and predicted conditions to decide when to irrigate.", "mime": "application/pdf"}, {"id": "cet-15752", "words": "3550", "extension": ".pdf", "flesch": "13", "author": null, "title": "cet-15752", "date": null, "keywords": "attitudes; behavior; chain; decision; flexibility; integration; leadership; supply", "summary": "The leadership behavior model In the context of leadership behavior models, numerous studies have examined how leaders\u2019 actions and interpersonal dynamics shape organizational adaptability and performance. One such model is proposed by Larsson et al. (2023), who analyzed leadership behavior through the interactional person\u2013situation paradigm.", "mime": "application/pdf"}, {"id": "cet-15753", "words": "3209", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-15753", "date": null, "keywords": "manufacturing; model; operations; pns; process; scheduling; tcpns; time", "summary": "For example, as a result of sawing performed in time slot 2, a cut-to-size laminated chipboard becomes available in the second time slot, which can then serve as input for edge banding starting in time slots 2 or 3. Conclusions This study demonstrated the applicability of two P-graph-based optimization methods for reducing per-unit energy demand in furniture manufacturing by increasing the utilization of production time.", "mime": "application/pdf"}, {"id": "cet-15754", "words": "3568", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-15754", "date": null, "keywords": "cost; energy; objective; optimization; process; set; solutions; structures; systems", "summary": "The current contribution aims at extending the solution generation to provide a complete set of Pareto optimal process structures and configurations according to multiple objectives, in addition to the previously available ranked list of N-best networks generated due to a single objective. In practical terms, Pareto optimal structures are incredibly useful for scenarios where multiple factors need to be optimized simultaneously.", "mime": "application/pdf"}, {"id": "cet-15755", "words": "3767", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-15755", "date": null, "keywords": "doi; et al; growth; metals; mining; phytoremediation; plants; research; science; soils; studies", "summary": "In efficacy of phytoremediation (n = 11), the first group tests vegetation and/or biochar in contaminated soils (Benidire et al., 2021; \u0160tofejov\u00e1, Fazeka\u0161 and Fazeka\u0161ov\u00e1, 2021; Wu et al., 2021; Singh, Singh and Dhal, 2022); the second analyses comparative strategies for heavy-metal removal in mining areas (Lebrun et al., 2021; Bhat et al., 2022; Bortnikova et al., 2022; Matei et al., 2022; Singh, Singh and Dhal, 2022); and the third evaluates 164 species-level efficacy in mining-derived substrates (Ope\u00f1a et al., 2022; Zhenggang et al., 2022; Watts et al., 2023). 1. Introduction Mining is one of the primary activities driving Peru\u2019s economic and industrial development 21 Cruzado-Tafur et al., 2021; Reboredo et al., 2021), yet its expansion can affect natural vegetation and trigger persistent environmental impacts linked to heavy metals (Madej\u00f3n et al., 2022; Wu et al., 2021).", "mime": "application/pdf"}, {"id": "cet-15756", "words": "2958", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-15756", "date": null, "keywords": "fibers; nps; pacos; silver; tsc", "summary": "This study aims to evaluate the stability and antibacterial effect of V. pacos fibers functionalized with Nps-Ag on Escherichia coli ATCC 25922 over time. For the standardization of the synthesis (in situ) of Nps-Ag on V. pacos fibers.", "mime": "application/pdf"}, {"id": "cet-15757", "words": "3822", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-15757", "date": null, "keywords": "chain; ncs; peg; stabilizers; starch; structure; surface; tga; water; znse:5%ag", "summary": "Initial assessment of ZnSe:5%Ag PEG NCs for possible biomedical uses. The XRD results, b) UV-Vis spectra and c) PL spectrum of ZnSe, ZnSe:5%Ag TGA, ZnSe:5%Ag PEG, ZnSe:5%Ag Starch NCs synthesized using different surface stabilizers The UV-Vis spectra of ZnSe:5%Ag TGA NCs, ZnSe:5%Ag PEG NCs, and ZnSe:5%Ag Starch NCs (Figure 3.1b) revealed that the absorption edge of ZnSe:5%Ag PEG NCs was slightly shifted to longer wavelengths when compared to ZnSe:5%Ag TGA NCs and ZnSe:5%Ag Starch NCs synthesized under the same conditions.", "mime": "application/pdf"}, {"id": "cet-15758", "words": "4026", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-15758", "date": null, "keywords": "degradation; drying; energy; order; phenolics; pretreatment; stems; temperature; tpc; water", "summary": "It also helped inactivate oxidative enzymes while reducing the drying duration, hence minimizing phenolic degradation. At drying completion, phenolic degradation in pretreated stems was lower (35.87-48.01%) than untreated ones (56.38-72.83%).", "mime": "application/pdf"}, {"id": "cet-15759", "words": "3191", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-15759", "date": null, "keywords": "adsorption; bamboo; biochar; figure; hydrochar; materials; metals; removal; water", "summary": "The material characterization study indicated a highly porous structure for biochar, which was crucial for metal adsorption. Both biochar and hydrochar were tested as adsorbent materials to remove methylene blue (MB) dye and heavy metals (lead Pb2+, cadmium Cd2+, copper Cu2+, and chromium Cr2+) in aqueous medium.", "mime": "application/pdf"}, {"id": "cet-1650", "words": "3433", "extension": ".pdf", "flesch": "36", "author": "Zainol, S.N.; Said, S.M.; Abidin, Z.Z.; Azizan, N.; Majid, F.A.A.; Jantan, I.", "title": "Synergistic Benefit of Eugenia Caryophyllata L. and Cinnamomum Zeylanicum Blume Essential Oils against Oral Pathogenic Bacteria", "date": "2017", "keywords": "activity; caryophyllata; combination; effect; oils; zeylanicum", "summary": "Both E. caryophyllata and C. zeylanicum oils possess antimicrobial activity against all the four bacteria when used on its own or in combination. This finding suggests a potential therapeutic benefit using the combination of E. caryophyllata and C. zeylanicum oils in the future management of oral infection.", "mime": "application/pdf"}, {"id": "cet-1651", "words": "3299", "extension": ".pdf", "flesch": "43", "author": "Noruddin, N.A.; Sulaiman, W.R.W.; Ismail, A.R.", "title": "Effect of Distance Intermittent Ultrasonic Wave Source on the Surfactant-Polymer Flooding Recovery and its Displacement Pattern", "date": "2017", "keywords": "displacement; flooding; oil; recovery; ultrasonic; vibration; wave", "summary": "It can be visualised that oil can be displaced efficiently when intermittent ultrasonic wave was applied. Application of ultrasonic waves and pulse vibrations in the reservoirs has been noticed to reduce the interfacial tension (IFT) between oil and water, resulting in reduction of capillary pressure in the pores and therefore, resulted to an improvement on oil recovery.", "mime": "application/pdf"}, {"id": "cet-1652", "words": "2754", "extension": ".pdf", "flesch": "43", "author": "Ayucitra, A.; Gunarto, C.; Kurniawan, V.; Hartono, S.B.", "title": "Preparation and Characterisation of Biosorbent from Local Robusta Spent Coffee Grounds for Heavy Metal Adsorption", "date": "2017", "keywords": "adsorption; biosorbent; coffee; ground; lead", "summary": "The analysis of bands and peaks with their corresponding surface functional groups for native, carbonised, and activated spent coffee grounds is presented in Table 1. Carbonisation and activation processes have altered the functional groups of spent coffee grounds.", "mime": "application/pdf"}, {"id": "cet-1653", "words": "5323", "extension": ".pdf", "flesch": "65", "author": "Bukhari, A.; Atta, M.; Idris, A.", "title": "Synthesis of Poly(L-) Lactide under Simultaneous Cooling and Microwave Heating by using Immobilised Candida Antarctica Lipase B", "date": "2017", "keywords": "= channel; cooling; erop; heating; lactide; microwave; plla; time; usec", "summary": "It was observed that as microwave heating time was increased from 4 h to 16 h monomer conversion and yield were also increased. HNMR spectra of PLLA obtained in eROP at 8 h and 16 h of microwave heating times are given in Figure 2. (a) (b)", "mime": "application/pdf"}, {"id": "cet-1654", "words": "3801", "extension": ".pdf", "flesch": "48", "author": "Sadikin, A.N.; Yusof, K.M.; Aziz, A.A.; Hassim, M.H.; Yamani, Z.Y.; Mustaffa, A.A.; Hamid, M.K.A.", "title": "A Multi-Year Study of Professional Skills Development among First Year Chemical Engineering Students", "date": "2017", "keywords": "course; engineering; learning; problem; reflective; skills; students; team; time", "summary": "It was concluded that the integrated teaching and learning approach in Introduction to Engineering course is effective in promoting positive professional skills development among engineering students. Time management is an important life skill and one that is vital to engineering student success in higher education.", "mime": "application/pdf"}, {"id": "cet-1655", "words": "2312", "extension": ".pdf", "flesch": "43", "author": "Alias, H.; Ani, M.F.C.", "title": "Thermal Characteristic of Nanofluids Containing Titanium Dioxide Nanoparticles in Ethylene Glycol", "date": "2017", "keywords": "conductivity; nanofluids; nanoparticles; temperature; thermal; tio2", "summary": "This study was conducted to meet the following objectives: i) to formulate stable nanofluids that contain titanium dioxide nanoparticles (TiO2) in ethylene glycol (EG) base fluid with the aid of gum arabic (GA) as the surfactant, ii) to conduct stability analysis of nanofluids, and iii) to measure thermal conductivity of nanofluids at different temperature and concentration of nanoparticles. 3.2 Conductivity analysis The enhancement in thermal conductivity becomes important parameter for nanofluids when used as effective heat transfer fluids.", "mime": "application/pdf"}, {"id": "cet-1656", "words": "3814", "extension": ".pdf", "flesch": "51", "author": "Widjaja, T.; Iswanto, T.; Altway, A.; Shovitri, M.; Juliastuti, S.R.", "title": "Methane Production from Coffee Pulp by Microorganism of Rumen Fluid and Cow Dung in Co-digestion", "date": "2017", "keywords": "biogas; coffee; cow; digester; digestion; dung; fluid; methane; production; pulp; rumen", "summary": "This shows that different substrate source can affect the amount of generated biogas, 1469 especially for coffee pulp substrate that has microbial inhibition component. Coffee pulp is abundantly available in Indonesia every year, about 1.65 \u00d7 106 t of coffee pulp were produced during the 2011 - 2015.", "mime": "application/pdf"}, {"id": "cet-1657", "words": "2750", "extension": ".pdf", "flesch": "58", "author": "Haura, A.L.; Ma'mun, K.Q.; Sutikno, J.P.; Handogo, R.", "title": "Re-refinery Used Oil Vacuum Distillation Column Control by using Internal Model Control", "date": "2017", "keywords": "controller; enriching; imc; point; response; set; temperature", "summary": "They were pressure controller, condenser level controller, enriching temperature controller, stripping temperature controller, and reboiler level controller. The integral absolute error (IAE) for 1DOF IMC for a set point change in the enriching temperature are 68.5 for enriching temperature response and 13.59 for stripping temperature response.", "mime": "application/pdf"}, {"id": "cet-1658", "words": "3148", "extension": ".pdf", "flesch": "58", "author": "Saifudin, N.A.A.M.; Ali, T.; Jusoh, Y.M.M.; Zaidel, D.N.A.; Muhamad, I.I.; Khair, Z.; Shaharuddin, S.", "title": "Effects of Ingredients Ratio on Physicochemical Properties of Convective-Microwave Nutritious Dried Rice Meal", "date": "2017", "keywords": "chicken; content; drm; meat; ratio; rice; vegetables", "summary": "High rice content reduces the expansion ratio. The volume of dried rice meal was taken after HAD and MD.", "mime": "application/pdf"}, {"id": "cet-1659", "words": "3056", "extension": ".pdf", "flesch": "46", "author": "Nasri, N.S.; Martel, H.; Abbas, I.M.H.I.; Hayatu, U.S.; Zain, H.M.; Abdulrasheed, A.; Mohsin, R.; Majid, Z.A.; Rashid, N.M.; Sharer, Z.; Garba, A.", "title": "Comparative Study of Natural Gas Adsorption Isotherms on KOH and H3PO4 Palm Kernel Shells Porous Activated Carbon", "date": "2017", "keywords": "adsorption; carbon; figure; gas; malaysia; palm; pks; pressure; samples; surface", "summary": "PKS activated carbon showed the development of porosity in the materials after carbonisation and microwave activation as shown in SEM and BET results. BET results showed that the total pore volume of PKS activated carbon is high and within the micro-pore range, which implies that it is suitable for gas phase adsorption applications.", "mime": "application/pdf"}, {"id": "cet-1660", "words": "2864", "extension": ".pdf", "flesch": "51", "author": "Bakar, S.H.A.; Hamid, M.K.A.; Wan Alwi, S.R.; Manan, Z.A.", "title": "Sensitivity Analysis of Industrial Heat Exchanger Network Design", "date": "2017", "keywords": "design; exchanger; heat; hen; network; sensitivity; value", "summary": "Average 60 48.21 Table 3: Value of ft correction factor and status of HEN design candidates Table 2: Sensitivity results of the original and new designed HENs Design Original HEN New HEN U TH1(%) 100 85.71 TH2 (%) 0 0 TH3(%) 0 0 TC1(%) 100 87.86 TC2 (%) 100 67.46", "mime": "application/pdf"}, {"id": "cet-1661", "words": "3720", "extension": ".pdf", "flesch": "43", "author": "Muslim, M.B.; Saleh, S.; Samad, N.A.F.A.", "title": "Effects of Purification on the Hydrogen Production in Biomass Gasification Process", "date": "2017", "keywords": "bed; biomass; gasification; gasifier; hydrogen; process; purification; reactor", "summary": "Figure 2: Fluidised bed gasification process with hydrogen purification flowsheet 3. Biomass gasification process can be applied as one of the solutions in order to utilize of oil palm frond waste.", "mime": "application/pdf"}, {"id": "cet-1662", "words": "3469", "extension": ".pdf", "flesch": "57", "author": "Syafiqah, I.; Wan Yussof, H.; Azoddein, A.A.M.; Chandraseagar, S.; Wan Ishak, F.", "title": "A Factorial Analysis Study on Removal of Mercury by Palm Oil Fuel Ash Adsorbent", "date": "2017", "keywords": "adsorbent; concentration; effect; efficiency; hg2; mercury; pofa; removal; solution", "summary": "3.2 Factors affecting mercury removal efficiency The highest percentage of mercury removal was obtained at 98.03 % with the adsorption conditions at 100 rpm, pH 2, 4 h, 5 mg/L of initial concentration of the Hg2+ solution, and 0.25 g of adsorbent dosage as shown in Table 2. A half fraction two-level factorial analysis with five factors was selected for the experimental design to determine the best adsorption conditions for mercury removal.", "mime": "application/pdf"}, {"id": "cet-1663", "words": "2966", "extension": ".pdf", "flesch": "47", "author": "Roli, F.M.; Yussof, H.W.; Saufi, S.M.; Seman, M.N.A.; Mohammad, A.W.", "title": "Synthesis of Nanofiltration Membrane Developed from Triethanolamine (TEOA) and Trimesoyl Chloride (TMC) for Separation of Xylose from Glucose", "date": "2017", "keywords": "glucose; membrane; separation; teoa; tfc; xylose", "summary": "TFC membranes have DOI: 10.3303/CET1756252 Please cite this article as: Roli F.M., Yussof H.W., Saufi S.M., Seman M.N.A., Mohammad A.W., 2017, Synthesis of nanofiltration membrane developed from triethanolamine (teoa) and trimesoyl chloride (tmc) for separation of xylose from glucose, Chemical Engineering Transactions, 56, 1507-1512 DOI:10.3303/CET1756252 1507 dominated most of the nanofiltration/reverse osmosis market since their commercial recognition in the 1980\u2019s (Dalwani, 2011). 3. Results and discussions 3.1 Characterisation of top skin layer Figure 2 shows the ATR-FTIR spectra comparison between TEOA, TMC, PES and TFC membrane, which have been modified at different concentration of TEOA: 8 % w/v and 4 % w/v. The reaction between the monomer TEOA in NAOH (1 % w/v) and 0.15 % w/v TMC in n-hexane as organic phase produces polyester polymer layer on membrane surface (Jalanni et al., 2012) as shown in Figure 2.", "mime": "application/pdf"}, {"id": "cet-1664", "words": "3958", "extension": ".pdf", "flesch": "53", "author": "Niawanti, H.; Zullaikah, S.", "title": "Removal of Bioactive Compound (?-Oryzanol) from Rice Bran Oil-Based Biodiesel Using Deep Eutectic Solvent", "date": "2017", "keywords": "biodiesel; bran; content; des; extraction; oil; oryzanol; rbo; rice", "summary": "In this work, we used rice bran oil-based biodiesel as raw material because RBO is potential low cost feedstock for biodiesel and new generation solvent (DES) to remove \u0263-oryzanol from crude biodiesel. Figure 1 shows the Flowchart of \u0263-oryzanol removal from rice bran oil based biodiesel.", "mime": "application/pdf"}, {"id": "cet-1665", "words": "2639", "extension": ".pdf", "flesch": "38", "author": "Kansha, Y.; Ishizuka, M.", "title": "Efficient Power Generation from Low Temperature Heat Source", "date": "2017", "keywords": "energy; generation; heat; power; system; temperature", "summary": "Energy harvesting, which involves power generation from low level energies such as low temperature heat, vibration and light, has attracted attention in Japan for online operation of sensor and electric devices. Compared with the other low level energies, we can easily obtain low temperature heat around plants and local communities such as exhaust heat from heat exchangers.", "mime": "application/pdf"}, {"id": "cet-1666", "words": "2859", "extension": ".pdf", "flesch": "52", "author": "Sulaiman, S.; Shah, B.; Jamal, P.", "title": "Production of Biodiesel from Palm Oil using Chemically Treated Fish Bone Catalyst", "date": "2017", "keywords": "biodiesel; bone; catalyst; fish; loading; time; wt%; yield", "summary": "Viriya-Empikul N., Krasae P., Puttasawat B., Yoosuk B., Chollacoop N., Faungnawakij K., 2010, Waste shells of mollusk and egg as biodiesel production catalysts, Bioresource technology 101, 3765-3767. The model equation based on coded values (A, B and C as calcination time, catalyst loading wt% and calcined fish bone) for biodiesel yield was expressed by Eq(2).", "mime": "application/pdf"}, {"id": "cet-1667", "words": "3448", "extension": ".pdf", "flesch": "52", "author": "Purnomo, C.W.; Indarti, S.; Wulandari, C.; Hinode, H.; Nakasaki, K.", "title": "Slow Release Fertiliser Production from Poultry Manure", "date": "2017", "keywords": "fertiliser; manure; matrix; method; nutrient; pellet; poultry; release; srf; urea", "summary": "(a) (b) Figure 3: Release simulation of (a) nutrient from pure poultry manure SRF pellet and (b) poultry manure with urea SRF pellet Table 1: Deff and SSE values from nutrient release simulation model Nutrient source (wt% N) Deff, (\u00d7 1,000 cm2/d) SSE (\u00d7 10-6) The model compares the release behaviour of nitrogen inside the pellet between only poultry manure SRF and the urea mixture SRF when it was immersed into the water.", "mime": "application/pdf"}, {"id": "cet-1668", "words": "2929", "extension": ".pdf", "flesch": "41", "author": "Jusoh, N.; Ruseli, S.N.N.M.; Badri, M.F.; Husin, N.; Hitam, S.M.S.", "title": "Biodecolourisation of Methyl Red Dye by Bacterial-Fungal Consortium", "date": "2017", "keywords": "consortium; dye; fungi; methyl; red; rot; white; wrf", "summary": "The result revealed that consortium of white rot fungi and Bacillus subtilis significantly enhanced the decolourisation of methyl red dye with more than 80 % of dye removal. The sample of white rot fungi were isolated from rotten wood and then were observed under microscope to determine its morphology.", "mime": "application/pdf"}, {"id": "cet-1669", "words": "3170", "extension": ".pdf", "flesch": "46", "author": "Ghazali, N.F.; Pahlawi, Q.A.; Hanim, K.M.; Makhtar, N.A.", "title": "Enzymatic Hydrolysis of Oil Palm Empty Fruit Bunch using Membrane Reactor", "date": "2017", "keywords": "cellulase; concentration; efb; enzyme; flux; hydrolysis; membrane; reactor; substrate; sugar", "summary": "Cellulase was tested for its reusability up to 216 h in enzymatic membrane reactor. Productivity increased remarkably from 0.003 g to 0.01 g of reducing sugar/FPU enzyme in batch reactor and enzymatic membrane reactor because the enzyme was reused.", "mime": "application/pdf"}, {"id": "cet-1670", "words": "3148", "extension": ".pdf", "flesch": "43", "author": "Pradana, Y.S.; Kusumastuti, Y.; Rahma, F.N.; Effendy, N.", "title": "Chitosan Flocculation-sedimentation for Harvesting Selected Microalgae Species Grown in Monoculture and Mixed Cultures", "date": "2017", "keywords": "biodiesel; cell; chitosan; et al; flocculation; harvesting; microalgae; process; removal; sedimentation; time", "summary": "Conventional biodiesel is derived from various feedstocks such as palm oil, which uses carbon-based catalyst (Raharningrum et al., 2013), rice husk, which uses ash-based catalyst (Chen et al., 2015), jatropha oil (Kusumaningtyas et al., 2016), soybean oil, which uses microwave (Encinar et al., 2012) and ultrasound systems (Brito et al., 2012), used cooking oil (Kawentar and Budiman, 2013), and palm fatty acid distillate, which uses char-based (Hidayat et al., 2015) and sulphated zirconia catalysts (Sawitri et al., 2016). The properties of chitosan, including its cationic behaviour and molecular weight (Li et al., 2013), can assist in coagulation (particle aggregation induced by electrolyte addition) and flocculation (aggregation resulting from the linking of several particles by a polymer chain) processes.", "mime": "application/pdf"}, {"id": "cet-1671", "words": "2871", "extension": ".pdf", "flesch": "48", "author": "Muharam, Y.; Pramadana, A.B.; Wirya, A.S.", "title": "Modelling and Simulation of a Bubble Column Photobioreactor for the Cultivation of Microalgae Nannochloropsis Salina", "date": "2017", "keywords": "co2; concentration; gas; growth; microalgae; model; photobioreactor; rate", "summary": "It appears that the higher CO2 concentration gives higher microalgae concentration. Pegallapati and Nirmalakhandan (2012) developed a macroscopic model for microalgae growth in a bubble column photobioreactor with CO2-transport between phases.", "mime": "application/pdf"}, {"id": "cet-1672", "words": "3102", "extension": ".pdf", "flesch": "54", "author": "Muharam, Y.; Nugraha, O.A.; Leonardi, D.", "title": "Modelling of a Hydrotreating Reactor to Produce Renewable Diesel from Non-Edible Vegetable Oils", "date": "2017", "keywords": "inlet; liquid; phase; product; reactor; \uf0b6 \uf0b6", "summary": "Trickle- bed reactor is a type of fixed bed reactor, while slurry reactor is a type of bubble column or stirred reactor. Conclusions The model of a large-scale trickle bed reactor for renewable diesel production via hydrotreating of triglyceride has been developed.", "mime": "application/pdf"}, {"id": "cet-1673", "words": "3941", "extension": ".pdf", "flesch": "51", "author": "Wong, T.S.; Hashim, Z.; Zulkifli, R.M.; Ismail, H.F.; Zainol, S.N.; Rajib, N.S.M.; Teh, L.C.; Majid, F.A.A.", "title": "LD50 Estimations for DiabecineTM Polyherbal Extracts Based on In Vitro Diabetic Models of 3T3-L1, WRL-68 and 1.1B4 Cell Lines", "date": "2017", "keywords": "3t3; cells; extracts; ic50; ld50; wrl-68", "summary": "3. Results and Discussions 3.1 Diabecine polyherbal extracts effect on cells viability In the present study, cytotoxicity of Diabecine polyherbal extracts on 3T3-L1, 1.1B4 and WRL-68 cell lines was determined with the MTT assay (Figure 1). There were no significant differences (P > 0.05) in the viability of 3T3-L1, 1.1B4 and WRL-68 cells after 24 h exposure of Diabecine polyherbal extracts from 1 - 100 \u00b5g/mL.", "mime": "application/pdf"}, {"id": "cet-1674", "words": "3464", "extension": ".pdf", "flesch": "47", "author": "Singh, S.; Nga, N.T.A.; Pham, T.L.M.; Tan, J.S.; Phuong, P.T.T.; Khan, M.R.; Vo, D.V.N.", "title": "Metgas Production from Bi-reforming of Methane over La- modified Santa Barbara Amorphous-15 Supported Nickel Catalyst", "date": "2017", "keywords": "catalysts; methane; reaction; reforming; sba-15; temperature", "summary": "Both NiO and SiO2 phases were detected for both La- modified and unmodified Ni-based catalysts whilst La2O3 particles were well dispersed on catalyst support. A desirable H2/CO ratio of about 2 was achieved at reaction temperature of 1,048 - 1,073 K. La-modified SBA-15 supported Ni catalyst exhibited greater activity and selectivity than those of unmodified counterpart.", "mime": "application/pdf"}, {"id": "cet-1675", "words": "3504", "extension": ".pdf", "flesch": "52", "author": "Samsudin, M.D.M.; Don, M.M.; Ibrahim, N.; Kasmani, R.M.; Zakaria, Z.; Kamarudin, K.S.", "title": "Batch Fermentation of Bioethanol from the Residues of Elaeis Guineensis: Optimisation using Response Surface Methodology", "date": "2017", "keywords": "bioethanol; incubation; inoculum; model; oil; opt; pome; sap; time; yield", "summary": "To obtain the optimum ratio of OPT sap to POME, inoculum size, initial pH, and incubation time for maximum bioethanol yield, response surface methodology (RSM) via face centred central composite design (FCCCD) was employed. The experimental data for glucose consumption, bioethanol yield, and biomass growth were fitted to polynomial equations and analysed.", "mime": "application/pdf"}, {"id": "cet-1676", "words": "2842", "extension": ".pdf", "flesch": "59", "author": "Othman, A.; Sulaiman, A.; Sulaiman, S.K.", "title": "The Use of Quicklime in Acid Mine Drainage Treatment", "date": "2017", "keywords": "amd; figure; percentage; quicklime; reaction; sulphur; treatment; water", "summary": "SCG suitable to be used as reducing lead content in polluted DOI: 10.3303/CET1756265 Please cite this article as: Othman A., Sulaiman A., Sulaiman S.K., 2017, The use of quicklime in acid mine drainage treatment, Chemical Engineering Transactions, 56, 1585-1590 DOI:10.3303/CET1756265 1585 mailto:anuarpjj@gmail.com water (Lavecchia et al., 2016) because it contains a lot of organic compounds such as fatty acids, amino acids, polysaccharides (Campos-Vega et al., 2015). Many chemicals can be used as AMD treatment besides quicklime.", "mime": "application/pdf"}, {"id": "cet-1677", "words": "3348", "extension": ".pdf", "flesch": "52", "author": "Said, N.; Hasbullah, H.; Ismail, A.R.; Abidin, M.N.Z.; Goh, P.S.; Othman, M.H.D.; Kadir, S.H.S.A.; Kamal, F.; Abdullah, M.S.; Ng, B.C.", "title": "The Effect of Air Gap on the Morphological Properties of PSf/PVP90 Membrane for Hemodialysis Application", "date": "2017", "keywords": "air; air gap; fibre; gap; hemodialysis; membrane; morphology; psf; size", "summary": "In hemodialysis, the use of hollow fibre membrane is more preferable since it has a larger contact area with blood and the dialysate in spite of its small volume as a whole to exhibit excellent mass transfer efficiency (Feng et al., 2013). Table 2: Dimensional changes of hollow fibre membranes as a function of air gap Air gap (cm) Residence time (s) OD (cm) ID (cm) OD/ID Ratio Cross-Section Area Change Ratioa 3 0.38 0.045 0.036 1.25 3.70 30 3.82 0.035 0.023 1.52 3.80 50 6.36 0.031 0.020 1.55 4.81 aRatio of the spinneret cross-section area to a fibre cross-section area.", "mime": "application/pdf"}, {"id": "cet-1678", "words": "3299", "extension": ".pdf", "flesch": "37", "author": "Wulandari, W.; Sasongko, D.", "title": "Teaching Elective Subjects for Junior Students in Chemical Engineering: A Case for Chemistry and Technology of Coal", "date": "2017", "keywords": "chemical; coal; course; energy; engineering; paper; processing; students; technology", "summary": "Overview of Chemistry and Technology Coal Course Coal Processing Technology Course (3 credits) has been delivered to Chemical Engineering students since the beginning of 2000s. Conclusions The description and knowledge sharing of learning and teaching Chemistry and Technology of Coal as elective course for Chemical Engineering students in the junior year have been presented in this paper.", "mime": "application/pdf"}, {"id": "cet-1679", "words": "2818", "extension": ".pdf", "flesch": "41", "author": "Creencia, E.C.", "title": "The Role of Chemical Engineering in Iligan City\u2019s Solid Waste Management Program", "date": "2017", "keywords": "biomass; chemical; city; compost; conveyor; energy; engineering; gasification; iligan; technology; waste", "summary": "With this technology, environmental problems regarding waste plastics as well as the foreign oil dependency can be minimised. Singh R.K., Panda A.K., Mishra D.K., 2010, Thermolysis of waste plastics to liquid fuel: a suitable method for plastic waste management and manufacture of value added products: a world prospective, Renewable and Sustainable Energy Reviews 14 (1), 233\u2013248.", "mime": "application/pdf"}, {"id": "cet-1680", "words": "3068", "extension": ".pdf", "flesch": "48", "author": "Abidin, M.N.Z.; Goh, P.S.; Ismail, A.R.; Othman, M.H.D.; Hasbullah, H.; Said, N.; Kadir, S.H.S.A.; Kamal, F.; Abdullah, M.S.; Ng, B.C.", "title": "The Effect of PCA-g-MWCNTs Loading on the Performance of PES/MWCNTs Hemodialysis Membrane", "date": "2017", "keywords": "membrane; mwcnts; pca; performance; pes; pwf; separation; water", "summary": "DOI: 10.3303/CET1756269 Please cite this article as: Abidin M.N.Z., Goh P.S., Ismail A.R., Othman M.H.D., Hasbullah H., Said N., Kadir S.H.S.A., Kamal F., Abdullah M.S., Ng B.C., 2017, The effect of pca-g-mwcnts loading on the performance of pes/mwcnts hemodialysis membrane, Chemical Engineering Transactions, 56, 1609-1614 DOI:10.3303/CET1756269 1609 mailto:peisean@petroleum.utm.my Modification of PES membrane was done to allow better hydrophilicity (Huang et al., 2012), where it has a positive effect on flux, separation and antifouling performance (Zhao et al., 2012). 2.6 Evaluation of membrane separation performance The PWF, J and BSA rejection, R of the membranes were measured to evaluate the membranes separation performance.", "mime": "application/pdf"}, {"id": "cet-1681", "words": "2190", "extension": ".pdf", "flesch": "47", "author": "Than, S.S.", "title": "Optimisation of Acid Hydrolysis of Grasses using Response Surface Methodology for the Preparation of Bioethanol", "date": "2017", "keywords": "acid; ethanol; grass; grasses; hydrolysis", "summary": "Three variables such as acid concentration, acid volume and hydrolysing time were considered as influencing factors on the yield of fermentable sugars during acid hydrolysis. Fresh stems of grass were processed into fermentable sugars by acid hydrolysis using sulfuric acid.", "mime": "application/pdf"}, {"id": "cet-1682", "words": "2970", "extension": ".pdf", "flesch": "53", "author": "Sangaran, S.; Haron, S.", "title": "Operator Training Simulator for Ethylene Plant", "date": "2017", "keywords": "control; data; dcs; flow; model; operator; plant; process; simulation; test; training", "summary": "Figure 3: Real plant converted into virtual plant Table 4: Difference between plant data and model value during MAT testing Tag Description Plant Data HMB Model Value 1 Model Value 2 Unit OL1201:FI08 CO2 abs tails flow 76 80 95 83 t/h OL1201:PDI04A Some of the valves were resized to get normal flow as per plant data during start-up and shutdown of the plant.", "mime": "application/pdf"}, {"id": "cet-1683", "words": "2618", "extension": ".pdf", "flesch": "54", "author": "Es-Saheb, M.; Khan, S.M.A.; Mohsin, M.E.A.", "title": "Fatigue Behaviour of AA 7075-T6 Plates Repaired at Different Crack Lengths", "date": "2017", "keywords": "crack; fatigue; figure; life; patch; repair", "summary": "The repair efficiency and fatigue life of cracked specimens repaired at different initial crack lengths of (a0 = 3 mm, 6 mm and 9 mm) and different stress ratios of (R = 0 and R = 0.1) were investigated. Mello et al. (2005) analysed the repair performance of Al 5052- DOI: 10.3303/CET1756272 Please cite this article as: Es-Saheb M., Khan S.M.A., Mohsin M.E.A., 2017, Fatigue behaviour of aa 7075-t6 plates repaired at different crack lengths, Chemical Engineering Transactions, 56, 1627-1632 DOI:10.3303/CET1756272 1627 H32 by composite patch for different initial crack lengths.", "mime": "application/pdf"}, {"id": "cet-1684", "words": "2882", "extension": ".pdf", "flesch": "46", "author": "Montealegre, C.M.; Ilao, A.C.; Mendoza, R.V.T.; Carpio, R.P.M.; Leon, R.L.D.", "title": "Effect of Blumea Balsamifera Extract in the Kinetics of Calcium Oxalate Crystallisation", "date": "2017", "keywords": "balsamifera; calcium; concentration; crystallisation; extract; oxalate; rate", "summary": "This is consistent with various literature data on calcium oxalate crystallisation where the reported reaction order is 2 (\u00d6ner et al., 2015). Saha S., Verma R.J., 2013, Inhibition of calcium oxalate crystallisation in vitro by an extract of Bergenia ciliata, Arab Journal of Urology 11 (2), 187\u2013192. 1638", "mime": "application/pdf"}, {"id": "cet-1685", "words": "2336", "extension": ".pdf", "flesch": "41", "author": "Fatimah, I.; Yudha, S.P.; Rubiyanto, D.; Widodo, I.D.", "title": "Methenamine-Smectite Clay as Slow Release Fertiliser: Physicochemical and Kinetics Study", "date": "2017", "keywords": "chemical; content; figure; materials; methenamine; release; slow; study", "summary": "From the pattern, it is confirmed that all prepared materials give slow release methenamine as the stable content for all varied materials. 2.2 Methods 2.2.1 Samples preparation Methenamine immobilised montmorillonite at varied methenamine contents (20 mmol/g; 50 mmol/g and 100 mmol/g) was prepared using the intercalation process by employing microwave irradiation method.", "mime": "application/pdf"}, {"id": "cet-1686", "words": "1968", "extension": ".pdf", "flesch": "49", "author": "Puspita, A.; Prawati, G.; Fatimah, I.", "title": "Chitosan-Modified Smectite Clay and Study on Adsorption- Desorption of Urea", "date": "2017", "keywords": "adsorption; chitosan; clay; figure; mmt; sap; urea", "summary": "Modified clay was prepared by intercalating chitosan into layer structure of smectite clay; saponite and montmorillonite. Result and Discussion The main effect of clay modification during the CRF preparation is the change of clay structure.", "mime": "application/pdf"}, {"id": "cet-1687", "words": "2360", "extension": ".pdf", "flesch": "40", "author": "Fatimah, I.; Pradita, R.Y.; Nurfalinda, A.", "title": "Study on ZnO Catalytic Activity in Salycilic Acid Degradation by Sonophotocatalysis", "date": "2017", "keywords": "acid; degradation; figure; salicylic; solution; zno", "summary": "Wavelength (nm) 0 4 8 12 16 1 2 3 4 5 F (R )h v Band gap Energy (eV) 1654 Figure 6: Spectra of treated salicylic acid solution at varied time under ZnO+UV treatment Figure 7: Kinetics of salicylic acid degradation over varied treatments (a) without H2O2 (b) with H2O2 The synergistic index of the proses using catalytic degradation and also catalytic oxidation degradation was calculated using Eq(2) and Eq(3). Figure 3: Adsorption-desorption pattern of prepared ZnO The photoactivity and sonoactivity of ZnO is shown by the kinetics of salicylic acid degradation over varied treatments in Figure 6.", "mime": "application/pdf"}, {"id": "cet-1688", "words": "3714", "extension": ".pdf", "flesch": "52", "author": "Ahmad, Z.; Sarmidi, M.R.; Hasham, R.", "title": "Evaluation of Wound Closure Activity of Cocos Nucifera Oil on Scratched Monolayer of Human Dermal Fibroblasts", "date": "2017", "keywords": "cell; closure; coconut; extract; oil; vco; wound", "summary": "3.2 Effect of VCO extract on the cell viability Cells from the fibroblast cell line (HSF 1184) were exposed to increasing concentrations of VCO extracts for 24 h and their viability was assessed using the MTT assay. In conclusion, VCO contains antioxidants and phenolic compounds that might promote the proliferation and migration of cells to enhance wound closure activity on human dermal fibroblast cells.", "mime": "application/pdf"}, {"id": "cet-1689", "words": "2943", "extension": ".pdf", "flesch": "50", "author": "Cahyono, R.B.; Santoso, J.; Miliati, R.", "title": "Biomass Briquettes using Indonesia Durian Seeds as Binder Agent: The Effect of Binder Concentration on the Briquettes Properties", "date": "2017", "keywords": "agent; binder; briquettes; concentration; content; durian; material; seeds; shell", "summary": "1665 Figure 2: Density and heating value testing of durian seeds briquettes at differences binder concentration Figure 2 shows heating value of briquettes decreased when binder concentration were changed from 4 to 8 % and remained constant after that binder concetration. Figure 3: Compressive strength and shatter index testing of durian seeds briquettes at differences binder concentration Figure 3 shows compressive strength increased at high binder concentration.", "mime": "application/pdf"}, {"id": "cet-1690", "words": "3628", "extension": ".pdf", "flesch": "53", "author": "Tan, H.B.; Ghani, W.A.W.A.K.; Hussian, S.A.; Ng, D.K.S.", "title": "Feasibility Study of Napier Grass and Oil Palm Frond Blend Pellets for Syngas Production", "date": "2017", "keywords": "biomass; blending; effect; energy; gasification; malaysia; oil; opf; palm; ratio; value", "summary": "Material and Methodology 2.1 Feedstock preparation The gasification experimental study has been carried out using fuel blends (NG-OPF), pure NG and pure OPF. NG and OPF biomass obtained and provided by Crops for the Future Research Centre (CFFRC). Basu P., 2006, Combustion and gasification in fluidized beds, CRC press, Boca Raton, Florida, United Sates. 0 1 2 3 4 5 6 D ry p ro du ct g as H H V (M J/ N m 3 ) NG NG: OPF 25: 75 NG: OPF 50:50 NG: OPF 75: 25 OPF 0 20 40 60 80 100 C ar bo n co nv er si on ef fic ie cn y (% ) NG NG: OPF 25: 75 NG: OPF 50: 50 NG: OPF 75:25 OPF 1673 Cao Y., Wang Y., Riley J.T., Pan W.P., 2006, A novel biomass air gasification process for producing tar-free higher heating value fuel gas, Fuel Processing Technology 87 (4), 343-353.", "mime": "application/pdf"}, {"id": "cet-1691", "words": "3864", "extension": ".pdf", "flesch": "50", "author": "Alias, N.H.; Abbas, Z.", "title": "Preliminary Investigation on the Total Phenolic Content and Antioxidant Activity of Pineapple Wastes via Microwave- Assisted Extraction at Fixed Microwave Power", "date": "2017", "keywords": "activity; antioxidant; content; ethanol; extraction; phenolic; pineapple; value; water", "summary": "The extract obtained was then analysed for total phenolic content and antioxidant activity. The aims of the present paper are to determine the phenolic compound and antioxidant activity of pineapple waste and to find the optimum condition at 250 W microwave power by using MAE with the temperature varied at 30 \u00b0C, 60 \u00b0C, 90 \u00b0C and 120 \u00b0C.", "mime": "application/pdf"}, {"id": "cet-1692", "words": "2759", "extension": ".pdf", "flesch": "53", "author": "Amran, U.I.; Ahmad, A.; Othman, M.R.", "title": "Kinetic Based Simulation of Methane Steam Reforming and Water Gas Shift for Hydrogen Production Using Aspen Plus", "date": "2017", "keywords": "carbon; hydrogen; methane; msr; rate; reaction; reactor; steam; wgs", "summary": "After that, hydrogen flow rate started to become constant. Figure 4 (c) shows the effect of pressure on hydrogen flow rate.", "mime": "application/pdf"}, {"id": "cet-1693", "words": "3029", "extension": ".pdf", "flesch": "56", "author": "Boonyoung, P.; Treeweranuwat, P.; Leewattanakarn, P.; Nueangnoraj, K.", "title": "Hetero-atom Decoration of Activated Carbon without Post-Treatment", "date": "2017", "keywords": "acs; carbon; crab; lignin; lignite; nitrogen; shells; shrimp", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Peng Yen Liew, Wai Shin Ho, Jeng Shiun Lim Copyright \u00a9 2017, AIDIC Servizi S.r.l., ISBN 978-88-95608-47-1; ISSN 2283-9216 Hetero-atom Decoration of Activated Carbon without Post-Treatment Pawan Boonyoung, Panudetch Treeweranuwat, Peewara Leewattanakarn, Khanin Nueangnoraj* School of Bio-Chemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Thailand khanin@siit.tu.ac.th In this work, we attempt to decorate heteroatoms, including nitrogen and sulphur, into activated carbon without post-treatment. It is found that activated carbon prepared from shrimp shells has a higher nitrogen content (1.40 wt%) than that prepared from crab shells (0.47 wt%).", "mime": "application/pdf"}, {"id": "cet-200", "words": "3619", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-200", "date": null, "keywords": "acid; catalysts; gvl; hydrogenation; levulinic; mn100; valerolactone", "summary": "Besides the 5 %-Ru/C, which was shown to provide high yields of GVL at relatively mild reaction conditions (Protsenko et al., 2016), a number of the heterogeneous catalysts intended for the synthesis of GVL from LA has been developed as a result of numerous studies, e.g. the catalysts on the basis of noble metals such as Pd (Wright and Palkovits, 2012) and Pt (Upare et al., 2011) deposited on inorganic supports. Earlier it was shown that Ru/HPS, especially the catalysts based on HPS of MN100 type containing amino-groups, can serve as an alternative to the commercial 5 %-Ru/C catalyst (Protsenko et al., 2016), however the bounds of high GVL yield for Ru/HPS catalysts were not studied.", "mime": "application/pdf"}, {"id": "cet-201", "words": "3342", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-201", "date": null, "keywords": "case; flow; reflux; start; time", "summary": "This paper discusses two methods for reflux flow switch time. Kruse et al. (1996) investigated the total reflux removal strategy for start-up and product changeover, where the optimal switching time from reflux flow 0 to steady state was determined by the minimum temperature difference (MT-function).", "mime": "application/pdf"}, {"id": "cet-202", "words": "3171", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-202", "date": null, "keywords": "deficit; etd; exchanger; figure; heat", "summary": "Kamel D.A., Gadalla M.A., Abdelaziz O.Y., Labib M.A., Ashour F.H., 2017, Temperature driving force (TDF) curves for heat exchanger network retrofit \u2013 A case study and implications, Energy, 123, 283\u2013295. The ETD assisted to identify heat transfer bridges within an existing HEN and for explaining how energy is transferred through a network from hot utility to cold utility and ultimately the environment (Bonhivers et al., 2014b).", "mime": "application/pdf"}, {"id": "cet-203", "words": "3722", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-203", "date": null, "keywords": "analysis; carbon; co2; emissions; energy; footprint; methodology", "summary": "Using a case study based on Philippine data, the methodology is shown to provide useful insights for determining how carbon emissions intensity can be reduced. Process Integration (PI) methodology, which was originally developed to optimize heat recovery in industrial plants (Linnhoff et al., 1982) has proven to be an important engineering strategy for reducing carbon emissions due to the reduction in fuel use (Dhole and Linnhoff, 1993).", "mime": "application/pdf"}, {"id": "cet-204", "words": "3198", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-204", "date": null, "keywords": "desalination; energy; performance; pressure; process; recovery; steam; system; temperature; water", "summary": "For comparison, a coupling system without energy recovery process is also modeled in the steady-state condition. It is mentioned that Eq (5) is valid in the most common operating ranges in TVC desalination systems.", "mime": "application/pdf"}, {"id": "cet-205", "words": "2947", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-205", "date": null, "keywords": "algorithm; fly; foa; fruit; model; optimization; regression; svr", "summary": "It is based on fruit fly optimization algorithm (FOA) by introducing multi-strategies modified searching weights and linear modified optimal fruit fly weight, and then combining it with support vector regression (SVR). Thus, the framework of MWMSFOA-SVR model construction is firstly using FOA-SVR to obtain the optimal parameter, and then integrating with multi-strategies to introduce modified searching weights and linear modified optimal fruit fly weight.", "mime": "application/pdf"}, {"id": "cet-206", "words": "3611", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-206", "date": null, "keywords": "biogas; control; heat; plant; power; reserves; simulation; storage", "summary": "Plants that operate on biomass-based technologies, like biogas plants, have a high potential for producing energy on demand due to the almost infinite storability of the energy carrier. Heat and power can be produced flexibly at biogas plants by using CHP units.", "mime": "application/pdf"}, {"id": "cet-207", "words": "2587", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-207", "date": null, "keywords": "column; distillation; energy; heat; methanol; scheme", "summary": "(iii) For heat integrated distillation columns, the rectifying and stripping sections are internally coupled through heat exchangers. Three main heat integration arrangements for a CDiC are proposed below to facilitate energy-saving purpose for methanol distillation scheme: (i)", "mime": "application/pdf"}, {"id": "cet-208", "words": "2443", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-208", "date": null, "keywords": "analysis; configuration; energy; generator; system", "summary": "Theodosiou G., Stylos N., Koroneos, C., 2015, Integration of the environmental management aspect in the optimization of the design and planning of energy systems, Journal of Cleaner Production 106, 576-593. This integration system or also known as distributed energy system (DES) offer a quick fix and more environmental friendly options in power supply system (Belderbos et al., 2017).", "mime": "application/pdf"}, {"id": "cet-209", "words": "4046", "extension": ".pdf", "flesch": "65", "author": null, "title": "cet-209", "date": null, "keywords": "batch; kmol; liquid; mode; phase", "summary": "Step 1: Removal of B in the form of E-lean phase. The excess of E-lean phase is withdrawn as distillate, while that of the E-rich phase is refluxed to the column, either entirely (Strategy A) or partially (Strategy B).", "mime": "application/pdf"}, {"id": "cet-210", "words": "3158", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-210", "date": null, "keywords": "demand; heat; model; plant; time; waste; wtep", "summary": "In this paper district heating is considered, since significant fluctuations in heat demand may occur there. Heat demand was modelled using data from the previous section.", "mime": "application/pdf"}, {"id": "cet-211", "words": "3720", "extension": ".pdf", "flesch": "70", "author": null, "title": "cet-211", "date": null, "keywords": "area; cost; land; layout; piping; plants", "summary": "Where \u03b1ij represents if the plant i connects plant j: \u03b1ij =1 when they are connected; \u03b1ij =0 when they are not connected, UICij is unit interconnection cost between plants i and j, and dij is the interconnected distance between plants i and j. \u22c5 = \u22c5 \u22c5 \u22c5 (6) Where x1i and y1i are the lower left coordinates of plant i, x1j and y1j are the lower left coordinates of plant j, x2i and y2i are the upper right coordinates of plant i, x2j and y2j are the upper right coordinates of plant j. Constraints (3)-(6) represent the plant i is on the left, right, top and bottom sides of the plant j respectively.", "mime": "application/pdf"}, {"id": "cet-2120", "words": "3183", "extension": ".htm", "flesch": "51", "author": "Prasciolu, C.; Perra, V.; Desogus, F.; Tronci, S.; Currelli, N.; Saiu, G.; Grosso, M.", "title": "Modelling and Optimization of Poly-Aromatic-Hydrocarbons Biodegradation by Bulab 5738", "date": "2017", "keywords": "catechol; concentration; degradation; effect; growth; phenanthrene; pyrene; removal; table", "summary": "Eng., Article ID 801213, 2015,11, DOI: 10.1155/2015/801213 Vila J., Tauler M., Grifoll M., 2015, Bacterial PAH degradation in marine and terrestrial habitats, Curr. Mrozic A., 2003, Bacterial degradation and bioremediation of polycyclic aromatic hydrocarbons.", "mime": "application/pdf"}, {"id": "cet-2121", "words": "3283", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-2121", "date": null, "keywords": "al2o3; alumina; catalysts; hydrogen; methane; support", "summary": "It is also observed that the methane conversion decreased over time which is due to the deposition of carbon produced as a by-product during the methane cracking reaction, resulting in the blockage of active sites and reduction in catalyst surface area (Abbas and Wan Daud, 2010, Sy et al., 2012, Choudhary et al., 2001). The second type of Ni particles formed was smaller in size (50 to 100 nm) and corresponded to the elemental Ni particle.", "mime": "application/pdf"}, {"id": "cet-2122", "words": "3043", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-2122", "date": null, "keywords": "flood; magdalena; oil; river; season; shoreline; spill; study", "summary": "Mitigation associated with oil spill impacts depends largely on the formulation and implementation of adequate contingency plans, which should incorporate the identification of sources of oil spills, the simulation of the respective dispersion patterns and the characterization of areas that could be affected by a spill. dibarramojica@gmail.com / diana.ibarra1@correo.uis.edu.co In 2005, it was estimated that over 70% of oil spills in Colombia affected riverine areas.", "mime": "application/pdf"}, {"id": "cet-2123", "words": "3049", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-2123", "date": null, "keywords": "co2; drop; impurities; phase; pipeline; pressure; temperature", "summary": "There were just over 6,500 km of CO2 pipelines worldwide with most transporting CO2 for enhanced oil recovery in the United States (Dooley et al., 2009, Noothout et al., 2014, IEA GHG, 2014). Table 1: CO2 pipelines with impurities in mol % (Patchigolla and Oakey, 2013).", "mime": "application/pdf"}, {"id": "cet-2124", "words": "3761", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-2124", "date": null, "keywords": "contaminant; falciglia; heating; microwave; mwh; pah; pahs; removal; soil; temperature", "summary": "MWH has been successfully proposed for contaminated soils (Falciglia et al., 2013; Robinson et al., 2009, 2012), aquifers (Falciglia et al., 2016) or wastes (Pereira et al., 2014). 4. Conclusions MWH for removal PAH from contaminated soil was shown to be efficient.", "mime": "application/pdf"}, {"id": "cet-2125", "words": "2235", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-2125", "date": null, "keywords": "biosurfactant; cage; diameter; figure; height; oil; oil cage", "summary": "Tansel, B., 2014, Propagation of impacts after oil spills at sea: Categorization and quantification of local vs regional and immediate vs delayed impacts. As the results, the diameter of 17.5 cm, the height of 13.7 cm, and the ratio between oil and biosurfactant of 0.300 were the best conditions to retrive the oil, and the total cost to build the system was \u20ac 368,00.", "mime": "application/pdf"}, {"id": "cet-2126", "words": "3491", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-2126", "date": null, "keywords": "accident; concentration; figure; modelling; oil; pipeline; ppm; risk; river; sea; spill; time", "summary": "By means of numerical methods, we performed a consequence-based assessment incorporating the effects, the hazardous distance and the reaction time scale, related to oil spill. This framework needed for drawing-up contingency plans and laying down operative procedures is developed at two time scales: short- time evolution of the cloud of hydrocarbon vapours, connected to potential toxic effects and flame development; short/medium-time study of the evolution of the drift of oil spills under the influence of wind and 374 tide estimation of the \u2018characteristic spreading time\u201d (Palazzi et al., 2004).", "mime": "application/pdf"}, {"id": "cet-2127", "words": "3275", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-2127", "date": null, "keywords": "air; battery; cell; cooling; temperature; velocity", "summary": "For high-power battery packs, such as those for HEV and PHEV applications, a considerable amount of heat can be generated in the cells as a result of high discharge currents during duty cycles, causing the rapid rise in cell temperature. Figure 1: Diagram of the experimental loop and test section (Th=temperature of the heater, Tc=temperature of the channel, \uf047=air mass flow, Txx=temperatures monitored in the battery pack, Ti=inlet air temperature, Tout=outlet air temperature).", "mime": "application/pdf"}, {"id": "cet-2128", "words": "3140", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-2128", "date": null, "keywords": "bed; biosorbent; biosorption; column; concentration; peat; removal; sphagnum; zn(ii", "summary": "The effect of influent metal ion Zn(II) concentration (10 and 100 mg/L) on Zn(II) removal was investigated and the experimental breakthrough curves were obtained. Operation of the column was stopped when equilibrium between influent and effluent Zn(II) ion concentration was achieved (99% of an initial Zn(II) concentration).", "mime": "application/pdf"}, {"id": "cet-2129", "words": "3081", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-2129", "date": null, "keywords": "chromium; concentration; data; values; water", "summary": "393 4. Results 4.1 Exploratory Analysis The samples were collected on August 20th, 2016, to verify the presence of Cr (VI) in the waters of Ci\u00e9naga de las Quintas, in addition, pH values were obtained for each point marked in Fig. Few authors have statistically quantified the relationship between sample size or distance between samples, the spatial distribution of variables such as those discussed in this study, such as the concentration of Chromium VI in surface waters of Ci\u00e9naga de las Quintas and the pH of the medium and the error associated with the estimation of the mean.", "mime": "application/pdf"}, {"id": "cet-2130", "words": "2720", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-2130", "date": null, "keywords": "activities; coordinator; health; health matters; matters; project; safety; stage", "summary": "It should be emphasized that, apart their intrinsic importance, the evident criticalities can be symptomatic of not immediately identifiable OS&H problems; \uf0fc safety inspections can then result particularly onerous in terms of resources an time involved: practical experience confirms that, whilst at depth inspections thoroughly covering the critical operations can be sparse, the elementary level inspections should be frequent, to promote the attention to OS&H of personnel with various qualifications working in the yard. 400 Table 3: Results of the CCCP technique applied to the considered 2006 accident Figure 3: Minimum information to collect previously to the beginning of yard activities.", "mime": "application/pdf"}, {"id": "cet-2131", "words": "3101", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-2131", "date": null, "keywords": "films; nanoclay; oil; oregano; pbat; polymers; starch; water", "summary": "The objective of this work was to produce and characterize active biodegradable films, by extrusion blow processing, with 58% of thermoplastic starch (29g glycerol/100 g cassava starch), 40% poly (butylene adipate co-terephthalate), 1 to 2 % oregano essential oil, 1 to 2% of nanoclay. Thus, the objectives of the present study were to produce active biodegradable films by blow extrusion of blends of cassava starch, PBAT, glycerol, added of oregano essential oil and nanoclay, and study the effects in the mechanical and permeation properties.", "mime": "application/pdf"}, {"id": "cet-2132", "words": "3960", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-2132", "date": null, "keywords": "concentrations; consortia; experiment; figure; hours; lead; plant; recycle; removal; results", "summary": "Due to the inherent restrictions confronted by contemporary technologies used for Pb removal, its extraction from the environment for direct reuse has thus far not been achieved. It is known that Pb concentrations below 10 mg/L can cause endocrine disruption (Supanopas et al., 2005), while entire ecosystems can be eradicated at concentrations greater than 1000 mg/L (Eisler, 1988).", "mime": "application/pdf"}, {"id": "cet-2294", "words": "3417", "extension": ".pdf", "flesch": "47", "author": "De La Fuente Garcia, E.; Carrara, V.; Fontana, F.; Natali Sora, I.", "title": "Simulated Weathering Tests of Photocatalytic Paint Containing LaFeO3", "date": "2017", "keywords": "cleaning; degradation; dye; irradiation; light; paint; samples; self; weathering", "summary": "Figure 2: Images of A) unweathered P reference paint; B) 50 cycles weathered PW reference paint; C) unweathered LF photocatalytic paint; D) 50 cycles weathered LFW photocatalytic paint. Figure 3: SEM micrographs of A) unweathered P reference paint; B) 50 cycles weathered PW reference paint; C) unweathered LF photocatalytic paint; D) 50 cycles weathered LFW photocatalytic paint.", "mime": "application/pdf"}, {"id": "cet-2297", "words": "2740", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-2297", "date": null, "keywords": "figure; nitride; powder; reaction; size; synthesis; temperature; tin; titanium", "summary": "Thermodynamics Considerations Ammonia is a common nitrogen source for production of titanium nitride powders. Mosbah, A.; Calka, A.; Wexler, D., Nov.2006, Rapid synthesis of titanium nitride powder by electrical discharge assisted mechanical milling.", "mime": "application/pdf"}, {"id": "cet-2298", "words": "2553", "extension": ".pdf", "flesch": "41", "author": "Cicci, A.; Sed, G.; Tirillo, J.; Stoller, M.; Bravi, M.", "title": "Production and Characterization of Silver Nanoparticles in Cultures of the Cyanobacterium A. Platensis (Spirulina)", "date": "2017", "keywords": "cultures; eps; nanoparticles; platensis; silver; size", "summary": "Mukherjee, P., Ahmad, A., Mandal, D., Senapati, S., Sainkar, S. R., Khan, M. I., Sastry, M., 2001, Fungus- mediated synthesis of silver nanoparticles and their immobilization in the mycelial matrix: a novel biological approach to nanoparticle synthesis. *agnese.cicci@uniroma1.it The increasing application of Silver nanoparticles in biologically-relevant areas (including production of textiles, cosmetics, and biomedical devices), where their presence provides a continuous release of silver ions to provide protection against bacteria and other unwanted microbial contaminants urges adoption of intrinsically biologically safe production processes.", "mime": "application/pdf"}, {"id": "cet-2299", "words": "3419", "extension": ".pdf", "flesch": "41", "author": "Bezza, F.; Chirwa, E.M.N.", "title": "Possible Use of Biosurfactant Produced by Microbial Consortium from Contaminated Soil for Microbially Enhanced Oil Recovery", "date": "2017", "keywords": "bacillus; biosurfactant; cmc; et al; oil; oil recovery; production; recovery; reservoir; water", "summary": "1. Introduction Increasing energy demands due to global population growth and the difficulty in discovering new oil fields as an alternative to the exploited oil fields urged to find out alternative technologies to increase oil recovery from existing oil fields around the world. Besides reducing interfacial and surface tensions biosurfactants can enhance oil recovery through altering wettability, aiding in the degrading of long alkyl chains, and cleaning up contaminated soil (Patel et al., 2015).", "mime": "application/pdf"}, {"id": "cet-2300", "words": "2985", "extension": ".pdf", "flesch": "48", "author": "Moliner, C.; Badia, J.D.; Bosio, B.; Arato, E.; Lagazzo, A.; Capurro, M.; Ribes-Greus, A.", "title": "Mechanical and Thermal Performance of PLA and PHBV- based Biopolymers as Potential Alternatives to PET", "date": "2017", "keywords": "addition; biocomposites; performance; pet; phbv; pla; properties; samples; sisal; thermal", "summary": "Table 1: Mechanical properties of PHBV, PLA and their biocomposites and associated error values(%) Also, the addition of CA resulted in a slight increase of thermal stability.", "mime": "application/pdf"}, {"id": "cet-2301", "words": "3774", "extension": ".pdf", "flesch": "48", "author": "Gifuni, I.; Olivieri, G.; Russo Krauss, I.; D'Errico, G.; Pollio, A.; Marzocchella, A.", "title": "Microalgae as New Sources of Starch: Isolation and Characterization of Microalgal Starch Granules", "date": "2017", "keywords": "amylose; chemical; food; granules; microalgae; production; size; starch; temperature; weight", "summary": "Gelatinization properties seemed similar to other starch sources, except for the onset temperature; probably the swelling of the starch started at lower temperature because of the higher specific surface (associated to small starch granules) which facilitate the water diffusion into starch granules and the crystallinity loss. The key starch features for industrial applications are: size and shape distributions of starch granules, crystallinity, amylose-amylopectin ratio, thermal properties.", "mime": "application/pdf"}, {"id": "cet-2302", "words": "3014", "extension": ".pdf", "flesch": "51", "author": "Vidart, J.M.M.; Freitas, E.D.; Nakashima, M.; Santos, R.D.J.; Rosa, P.C.P.; Gimenes, M.L.; Silva, M.G.C.; Vieira, M.G.A.", "title": "Evaluation of Incorporation Efficiency of Drugs in Sericin/Alginate Particles", "date": "2017", "keywords": "alginate; blend; drug; efficiency; formulations; ibuprofen; incorporation; ketoprofen; particles; quetiapine; sericin; solution", "summary": "Although alginate has been extensively evaluated for drug incorporation such as theophylline (Miyazaki et al., 2000) and metronidazole (Murata et al., 2000), alginate and sericin blend has been evaluated for drug incorporation to a lesser extent. Figure 2: Micrographs of pure drugs ibuprofen (Ibu) and ketoprofen (Keto) (magnification of 3,000x), and formulations content ibuprofen and ketoprofen (S3, B3, S4, B4).", "mime": "application/pdf"}, {"id": "cet-2303", "words": "3401", "extension": ".pdf", "flesch": "53", "author": "Sanabria Cala, J.; Miranda, C.M.; Laverde Catano, D.; Pena, D.Y.; Sarmiento Klapper, H.", "title": "Role of Corrosion Products by the Sulfidation of AISI/SAE-1020 Steel in Heavy Crude Oil at High Temperatures", "date": "2017", "keywords": "aisi; corrosion; exposure; hours; products; rate; sae-1020; steel", "summary": "The effect of temperature and exposure time on the formation of corrosion products on AISI/SAE-1020 steel was determined at typical service conditions of a transfer line that enters into an atmospheric distillation tower for processing heavy crude oil. Corrosion products formed at the steel surface were characterized using scanning electron microscopy (SEM) combined with x- ray energy dispersive spectrometry (EDS) and x-ray diffraction (XRD).", "mime": "application/pdf"}, {"id": "cet-2304", "words": "3674", "extension": ".pdf", "flesch": "43", "author": "Ferrari, P.F.; Aliakbarian, B.; Palombo, D.; Perego, P.", "title": "Small Diameter Vascular Grafts Coated with Gelatin", "date": "2017", "keywords": "engineering; gcs; gelatin; pcl; pgs; scaffolds; ucs; vascular; water", "summary": "3. Results and Discussion 3.1 Morphology of gelatin coated scaffolds (GCS) control, uncoated scaffolds, gelatin coated scaffolds.", "mime": "application/pdf"}, {"id": "cet-2305", "words": "2535", "extension": ".pdf", "flesch": "41", "author": "Tregrossi, A.; Apicella, B.; Ciajolo, A.; Russo, C.", "title": "Fast Analysis of PAH in Complex Organic Carbon Mixtures by Reconstruction of UV-Visible Spectra", "date": "2017", "keywords": "absorption; mixture; pah; spectra; spectrum", "summary": "The measured UV- spectrum of PAH mixtures can be reconstructed by a linear combination of the single PAH spectra, measured one by one, weighted by the single PAH mass contribution in the mixture according to Eq(1): Summing up, the total absorptivity can be considered as the sum of two contributions: the first one due to identified PAH absorption and the second one due to background absorption.", "mime": "application/pdf"}, {"id": "cet-2306", "words": "2836", "extension": ".pdf", "flesch": "51", "author": "Macedo Neto, J.; Kimura, S.P.R.; Vieira, M.G.A.; Neto, J.E.; Nascimento, N.R.; Lona, L.M.F.", "title": "Intercalation and Exfoliation Mechanism of Kaolinite During the Emulsion Polymerization", "date": "2017", "keywords": "clay; figure; kaolinite; layers; nanocomposites; polymer; polymerization", "summary": "jotacostaneto@gmail.com or jmacedo@uea.edu.br Layered clays have been used as reinforcement in polymer nanocomposites by having a structure of silicate layers, cation exchange capacity, organically modified and have high aspect ratios. In the production of polymer nanocomposites using clays as nano-reinforcement, the compatibility polymer- clay is fundamental to achieve desired properties for the nanocomposite and a stable latex.", "mime": "application/pdf"}, {"id": "cet-2307", "words": "3190", "extension": ".pdf", "flesch": "44", "author": "Acampora, L.; Marra, F.S.", "title": "Investigation by Thermodynamic Properties of Methane Combustion Mechanisms under Harmonic Oscillations in Perfectly Stirred Reactor", "date": "2017", "keywords": "chemical; combustion; entropy; ignition; mechanisms; reactions; temperature; time", "summary": "A large body of literature reports on global reaction mechanisms (e.g. Hj\u00e4rtstam et al., 2012) or on approaches to obtain reduced or skeletal mechanisms from those detailed (Tur\u00e1nyi and Tomlin, 2014). DOI: 10.3303/CET1757244 Please cite this article as: Acampora L., Marra F.S., 2017, Investigation by thermodynamic properties of methane combustion mechanisms under harmonic oscillations in perfectly stirred reactor, Chemical Engineering Transactions, 57, 1459-1464 DOI: 10.3303/CET1757244 1459 2.", "mime": "application/pdf"}, {"id": "cet-2308", "words": "3227", "extension": ".pdf", "flesch": "52", "author": "Sorokin, V.G.; Vyazmin, A.; Zhurov, A.I.; Reznik, V.; Polyanin, A.D.", "title": "The Heat and Mass Transfer Modeling with Time Delay", "date": "2017", "keywords": "delay; differential; equations; solution", "summary": "Exact solutions to nonlinear differential equations promote the better understanding of the qualitative features of the processes under description (nonuniqueness, spatial localization, blowup regimes, etc.). (1), we used various modifications of the methods of generalized and functional separation of variables (see, for information, handbooks by Polyanin and Manzhirov, 2007; Galaktionov and Svirshchevskii, 2007; Polyanin and Zaitsev, 2012) and the functional constraints method for parabolic delay equations (Polyanin and Zhurov, 2014b); for parabolic equations with varying transfer coefficients (Polyanin and Zhurov, 2014c).", "mime": "application/pdf"}, {"id": "cet-2309", "words": "3489", "extension": ".pdf", "flesch": "47", "author": "Malik, A.; Rojas-Solorzano, L.", "title": "Validation of a Numerical Model of Smoke Propagation in a Semi-Enclosed Space", "date": "2017", "keywords": "air; efficiency; fire; model; numerical; smoke; species; study; tunnel", "summary": "Obtained numerical model serves as a guideline tool capable of reproducing propagation of smoke in semi-enclosed spaces within minimal uncertainty than can be used in further studies as a predicting tool for engineering purposes. Lin, C.J. and Chuah, Y.K., 2008, A study on long tunnel smoke extraction strategies by numerical simulation.", "mime": "application/pdf"}, {"id": "cet-2310", "words": "3270", "extension": ".pdf", "flesch": "55", "author": "Silva, D.C.; Guirardello, R.; Freitas, A.C.D.", "title": "Modeling Vapor Liquid Equilibrium of Binary and Ternary Systems of CO2 + Hydrocarbons at High-Pressure Conditions", "date": "2017", "keywords": "data; eos; liquid; phase; systems; vapor", "summary": "Low deviations, %AAD = 2.33% for PR EoS and %AAD = 3.06% for PT EoS were observed for binary systems in the evaluation of 160 experimental points (EP). 1480 The same behavior observed for binary systems was observed here for the ternary systems too.", "mime": "application/pdf"}, {"id": "cet-2311", "words": "2795", "extension": ".pdf", "flesch": "47", "author": "Tvardovskiy, A.; Nabiulin, V.; Fomkin, A.; Shkolin, A.; Zaytsev, D.", "title": "Sorbostriction of AR-V Carbon Adsorbent in Organic Vapor Adsorption", "date": "2017", "keywords": "adsorbent; deformation", "summary": "It was shown that waves of adsorption deformation of adsorbents \u2013 waves of sorbostriction \u2013 appeared at a certain selection of adsorption parameters. Coudert F.-X.,Fuchs A. H.,Neimark A.V., 2016, Adsorption deformation of microporous composites, Dalton Transactions.", "mime": "application/pdf"}, {"id": "cet-2312", "words": "3792", "extension": ".pdf", "flesch": "56", "author": "Sabirgalieva, N.; Skartlien, R.; Rojas-Solorzano, L.", "title": "DPD Simulation of Surface Wettability Alteration by Added Water-Soluble Surfactant in the Presence of Indigenous Oil-Soluble Surfactant", "date": "2017", "keywords": "case; oil; surface; surfactant; water; wet", "summary": "Additional emulsion inversion studies confirmed the \u201cBancroft rule\u201d: oil-in-water emulsions were induced by water soluble surfactant, and water-in-oil emulsions were induced for oil soluble surfactant. 2.1 Case 1: \u201cWater wet to oil wet surface induced by oil soluble surfactant\u201d Wettability of the surface is a crucial characteristic, which describes the relative ability of a fluid to spread over the surface.", "mime": "application/pdf"}, {"id": "cet-2313", "words": "4342", "extension": ".pdf", "flesch": "59", "author": "Milani, G.; Milani, F.", "title": "Comprehensive Kinetic Numerical Model for NR and High-Cis Poly-Butadiene Rubber Blends", "date": "2017", "keywords": "k k", "summary": "The final vulcanization degree of the blend is: NR PB NR PB\uf061 \uf061 \uf061 \uf061 \uf02d\uf03d \uf02b \uf02b ( 9 ) The procedure followed to determine kinetic constants K1,2,3 NR, K1,\u2026,4 PB, K1,2,3 NR-PB and variable \uf078 is a standard one, namely a least-squares type approach is utilized, within the following non-linear constrained minimization problem: \uf028 \uf029 1 2 1 23 1 * 3 3 1 2 0 2 1 2 3 1 2 NR PB NR PB s NR PB NR PBNR PB ss NR PB K K t t NR PB NR PB NR PB NR PB K K t tK t t NR PB NR PB NR PB K e R R K K S K e e K K K \uf061 \uf078 \uf02d \uf02d \uf02d \uf02d\uf02d \uf02d \uf02d \uf02b \uf02d \uf02d \uf02d \uf02d \uf02d \uf02d \uf02b \uf02d\uf02d \uf02d \uf02d \uf02d \uf02d \uf0ec \uf0fc\uf0e9 \uf0f9 \uf02d \uf02b\uf0ef \uf0ef\uf0ea \uf0fa\uf0e9 \uf0f9\uf02b\uf0e9 \uf0f9 \uf02b \uf0ea \uf0fa\uf0ef \uf0ef\uf0eb \uf0fb \uf0eb \uf0fb\uf0eb \uf0fb\uf03d \uf03d \uf0ed \uf0fd \uf0e9 \uf0f9 \uf0e9 \uf0f9\uf0eb \uf0fb \uf0ef \uf0ef \uf02b \uf02d\uf0ea \uf0fa\uf0ef \uf0ef \uf02b \uf02d \uf0ea \uf0fa\uf0eb \uf0fb\uf0ee \uf0fe ( 8 )", "mime": "application/pdf"}, {"id": "cet-2314", "words": "3389", "extension": ".pdf", "flesch": "48", "author": "Contreras-Valenzuela, M.R.; Lopez-Sesenes, R.; Duque-Alvarez, A.E.; Leon-Hernandez, V.A.; Trujillo-Sandoval, B.", "title": "Redesign of Washing Process of Cartridge Case Using a Combination of Acids, Detergents and Anti-Tarnish Compounds", "date": "2017", "keywords": "batch; design; equipment; flow; process; tank; variables; washing; water", "summary": "Methodologies like Retrofit Design Approach and Hierarchical Decision Procedure by Douglas were combined for: 1) determining input Information, 2) developing diagnosis and identifying improvement proposals, 3) establishing input \u2013 output structure of the flowsheet, 4) defining critical variables of the process (CVsP), and 5) designing new units that support the change from batch process to continuous process. % liquid \u03c1 kg/m3 \u03c7 % Production volume by shift (7.5h) Time of loading cartdrige cases to washing tank in min Manual operate valve Process Time of cartdrige cases unloading from washing tank in min Water Time of mixtures loading in min On-Off Valve Steam Time of mixtures unloading in min Time of mixtures preparation in min Washing time min/batch Input streams: steam 1,3 Output streams: draining of mixtures 5 Barrel 1 Mix detergent and hot water Barrel 2 Mix degreaser and hot water Barrel 3 Mix acid solution 1 and water Barrel 4 Mix acid solution 2 and water Washing tank 1 Washing tank 5Washing tank 4Washing tank 3Washing tank 2 1 2 3 4 5 V1 V3 V2 V4 V9 V5 V10 V6 V11 V12 V7 V13 V8 V14 V18 V21V20V19V17 V16 V15 1503 During the evaluation of batch process variables using CPVs \u2013 Determination Matrix (see Figure 2), only seven process variables were selected for to be evaluated: materials pH (detergent, degreaser and acid solutions), temperature of water \u00b0C, foam density kg/m3, detergency efficiency %, liquid mixture density kg/m3 and concentration %.", "mime": "application/pdf"}, {"id": "cet-2315", "words": "3952", "extension": ".pdf", "flesch": "55", "author": "Mori, Y.; Nobuzane, Y.; Nishimura, K.; Yamada, K.; Tsuchiya, K.", "title": "Thin Film Structure of Titania Nanoparticles Prepared by Electrophoretic Deposition", "date": "2017", "keywords": "deposition; epd; layer; nps; p-25; particle; porosity; size; suspension", "summary": "Thickness of particle deposition layer prepared by EPD from suspensions with various particle sizes. Porosity of particle deposition layer prepared by EPD from P-25 NPs in mixture solvents.", "mime": "application/pdf"}, {"id": "cet-2316", "words": "3550", "extension": ".pdf", "flesch": "46", "author": "Naddeo, F.; Baldino, L.; Cardea, S.; Naddeo, A.; Reverchon, E.", "title": "Sensibility Analyses on Morphological Parameters of Cellulose Acetate - Graphene Oxide Nanocomposites using a Periodic 3D-FEM Model", "date": "2017", "keywords": "model; modeling; modulus; nanocomposite; prve; sheets; young", "summary": "Figure 2: PRVE FE model (micrometric structural level): a) Top view; b) 3D view. Figure 4: FE model: a) polymer matrix and corrugated GO sheets; b) isolated corrugated GO sheets; c) corrugation angle.", "mime": "application/pdf"}, {"id": "cet-2317", "words": "3145", "extension": ".pdf", "flesch": "52", "author": "Sarno, M.; Piscitelli, R.; Marra, F.; Cirillo, C.; Ciambelli, P.", "title": "Experimental, Modelling and Theoretical Study of CNT Growth and Connection on a Flip - Chip Device to Improve Thermal Management Performances", "date": "2017", "keywords": "bumps; chip; cnt; conductivity; device; figure; flip; heat; temperature", "summary": "The mechanism of CNT thermal management by COMSOL modelling was explored too. W/mK. Moreover, the aim of this paper was to study the role of the design parameters to mitigate the effects of a non-correct thermal management obtained with the help of high thermal conductive CNT connections bumps.", "mime": "application/pdf"}, {"id": "cet-2318", "words": "3457", "extension": ".pdf", "flesch": "56", "author": "Sarno, M.; Galvagno, S.; Piscitelli, R.; Portofino, S.; Cirillo, C.; Ciambelli, P.", "title": "New Designed Procedure for G/SiO2/SiC Nano-Heterojunctions Growth on Recycled 3C-SiC Powder", "date": "2017", "keywords": "carbon; layer; oxidation; oxide; oxygen; reaction; sic; silicon; sio2", "summary": "Numerous paper have been published on this theme (Sch\u00fcrmann et al., 2006), one of the key aspect was the diffusion of CO and CO2 molecules in SiO2 during SiC oxidation, whereas a challenging goal was to avoid carbon intermixing in the SiO2 interlayer and covering the outer surface by a carbon layer, e.g. few layer graphene. Scheme 1: The five steps during SiC oxidation.", "mime": "application/pdf"}, {"id": "cet-2319", "words": "3052", "extension": ".pdf", "flesch": "57", "author": "Yakubu, J.; Patel, R.; Mujtaba, I.M.", "title": "Optimization of Fluidized Catalytic Cracking Unit Regenerator to Minimize CO2 Emissions", "date": "2017", "keywords": "bed; carbon; co2; dioxide; fcc; regenerator", "summary": "Most FCC regenerators have two sections; dense bed and a freeboard. Any reduction achieved on carbon dioxide emission is progress made on solving the problems of global warming.", "mime": "application/pdf"}, {"id": "cet-2320", "words": "3842", "extension": ".pdf", "flesch": "50", "author": "Caputo, G.; Rubio, P.; Palumbo, A.; Scargiali, F.; Grisafi, F.; Brucato, A.", "title": "Valorization of Waste Solvents through Supercritical Water Gasification", "date": "2017", "keywords": "acid; carbon; concentration; gasification; mixture; phenol; product; scwg; water", "summary": "The performance metrics used for the definitions of the product yields in this study are Gasification Efficiency (GE), that measures the conversion of the feedstock to product gases and can be described as the ratio between the sum of the masses of product gases and that of the feedstock and the carbon efficiency (CE) that measures the mass percentage of carbon converted from the initial organic matter towards gases products, according to the formula in Eq(1) and Eq(2): \ud835\udc3a\ud835\udc38 (%) = \ud835\udc3a\ud835\udc4e\ud835\udc60 \ud835\udc40\ud835\udc4e\ud835\udc60\ud835\udc60 \ud835\udc39\ud835\udc59\ud835\udc5c\ud835\udc64 \ud835\udc45\ud835\udc4e\ud835\udc61\ud835\udc52 \ud835\udc42\ud835\udc62\ud835\udc61 \ud835\udc5a\ud835\udc4e\ud835\udc60\ud835\udc60 \ud835\udc5c\ud835\udc53 \ud835\udc5c\ud835\udc5f\ud835\udc54\ud835\udc4e\ud835\udc5b\ud835\udc56\ud835\udc50 \ud835\udc5a\ud835\udc4e\ud835\udc61\ud835\udc61\ud835\udc52\ud835\udc5f \ud835\udc56\ud835\udc5b \ud835\udc61\u210e\ud835\udc52 \ud835\udc53\ud835\udc52\ud835\udc52\ud835\udc51 \u2219 100 (1) \ud835\udc36\ud835\udc38 (%) We argue that this behaviour is likely true at low temperature at which conversion of phenol to gas product is very low and the reaction mechanism is still influenced by ionic reactions in the solution.", "mime": "application/pdf"}, {"id": "cet-2321", "words": "3890", "extension": ".pdf", "flesch": "46", "author": "Feihrmann, A.C.; Baptista, A.T.A.; Lazari, J.P.; Silva, M.O.; Vieira, M.F.; Vieira, A.M.S.", "title": "Evaluation of Coagulation/ Floculation Process for Water Treatment using Defatted Cake from Moringa Oleifera", "date": "2017", "keywords": "coagulants; extraction; hexane; moringa; oil; process; removal; treatment; water", "summary": "Further, the use of defatted seeds coagulants presented the advantage of decreasing DOC of the treated water differently from the use of the MO coagulant in its integral form. 2.4 Dissolved organic carbon (DOC) Dissolved organic carbon (DOC) was analysed in raw water, defatted coagulants and in the water treated by them.", "mime": "application/pdf"}, {"id": "cet-2322", "words": "2888", "extension": ".pdf", "flesch": "40", "author": "Almeida, F.C.; Rocha E Silva, N.M.P.; Meira, H.; Jara, A.M.T.; Luna, J.M.; Sarubbo, L.A.", "title": "Physico-Chemical Properties of the Biosurfactant Obtained from Fruit Extract of Genipa Americana L. and Tamarindus Indica L. and its Application in Oil Removal", "date": "2017", "keywords": "americana; biosurfactants; genipa; indica; oil; surface; tamarindus; tension; vegetable", "summary": "Figure 2: Effect of concentration NaCl on the surface tension of vegetable biosurfactants produced by Genipa americana L. and Tamarindus indica L. 1552 Figure 3: Effect of temperature on the surface tension of vegetable biosurfactants produced by Genipa americana L. and Tamarindus indica L. Figure 4: Effect of pH on the surface tension of vegetable biosurfactants produced by Genipa americana L. and Tamarindus indica L. 3.2 Oil removel by washing with vegetable biosurfactant The application of biosurfactants is one of the most promising techniques to remove and recover a significant amount of the residual oil in environment (Sarubbo et al., 2012). 3. Results and discussion 3.1 Assessment of physiochemical properties of vegetable biosurfactants The biosurfactant of origin vegetable, include a diverse group of compounds characterized by their structure containing a steroidal or triterpenoid aglycone and one or more sugar chains.", "mime": "application/pdf"}, {"id": "cet-2323", "words": "2534", "extension": ".pdf", "flesch": "34", "author": "Resende, A.H.; Rocha E Silva, N.M.P.; Rufino, R.D.; Luna, J.M.; Sarubbo, L.A.", "title": "Biosurfactant Production by Bacteria Isolated from Seawater for Remediation of Environments Contaminated with Oil Products", "date": "2017", "keywords": "bacteria; biosurfactant; figure; oil; production; surface; tension", "summary": "Biosurfactants also have many advantages over surfactants of chemical origin, such as low toxicity, stability against a wide range of pH and high temperatures, as well as resistance to high saline concentrations (Brasileiro et al., 2015) DOI: 10.3303/CET1757260 Please cite this article as: Resende A.H., Rocha E Silva N.M.P., Rufino R.D., Luna J.M., Sarubbo L.A., 2017, Biosurfactant production by bacteria isolated from seawater for remediation of environments contaminated with oil products, Chemical Engineering Transactions, 57, 1555-1560 DOI: 10.3303/CET1757260 1555 Optimization of biosurfactant production is of paramount importance, considering its ecological acceptability, biodegradability and extensive applications. 2.10 Determination of oil removal activity on contaminated soil In 250 ml Erlenmeyers flasks were added 50 grams of standard sand (NBR 7214) impregnated with 10 % of petroleum by-products (residual motor oil and non-residual motor oil).", "mime": "application/pdf"}, {"id": "cet-2324", "words": "3240", "extension": ".pdf", "flesch": "35", "author": "Belaud, J.P.; Adoue, C.; Sablayrolles, C.; Vialle, C.; Chorro, A.", "title": "Decision Making Approach for Industrial Ecology: Layout and Commercialization of an Industrial Park", "date": "2017", "keywords": "approach; commercialization; decision; eco; eip; making; park; process; synergies; tarn", "summary": "Free plots in existing industrial parks for new factories are rare and expensive. Les Portes du Tarn, Albi, France jeanpierre.belaud@ensiacet.fr One of the industrial ecology fulfillments is the concept of eco-industrial park (EIP).", "mime": "application/pdf"}, {"id": "cet-2325", "words": "3439", "extension": ".pdf", "flesch": "47", "author": "Rosso Ceron, A.M.; Blanco Pati\u00f1o, F.; Araque Duarte, J.; Kafarov, V.", "title": "Potential Assessment of Renewable Energy Sources in Non-interconnected Zones of Colombia, using Geographic Information System - ArcGIS: Study of Cases", "date": "2017", "keywords": "biomass; choc\u00f3; colombia; energy; meta; potential; putumayo; spanish; study; water; wind", "summary": "M. Rosso Cer\u00f3n, Francy Blanco Pati\u00f1o, Juli\u00e1n Araque Duarte, Viatcheslav Kafarov* Chemical Engineering Department, Universidad Industrial de Santander, carrera 27 calle 9; Bucaramanga-Colombia kafarov@uis.edu.co The aim of this research is assessing energy potential of solar, wind, hydro, and agricultural residue biomass sources and choose the best option for the municipals of three departments with the highest energy demand in non-interconnected zones of Colombia. On the other hand, the use of developed countries\u2019 software such as METEONORM is not suitable to determine energy potential in Latin America, since its database has no accurate information on weather stations, and data interpolation techniques involve wrong information.", "mime": "application/pdf"}, {"id": "cet-2326", "words": "3369", "extension": ".pdf", "flesch": "48", "author": "Mikhalevich, S.; Krinitsyn, N.; Manenti, F.; Kurochkin, V.; Baydali, S.", "title": "Developing of KUKA youBot Software for Education Process", "date": "2017", "keywords": "area; education; engineering; ides; kuka; motion; platform; programming; robot; robotics; software; youbot", "summary": "Robot programming software So, KUKA youBot platform with robotic-arm was chosen for testing.", "mime": "application/pdf"}, {"id": "cet-2327", "words": "2749", "extension": ".pdf", "flesch": "56", "author": "Ramos, V.S.; Sena, H.J.; Fileti, A.M.F.; Silva, F.V.", "title": "Teaching Multivariable Model Predictive Control in a Laboratory Scale Three-Tank Process", "date": "2017", "keywords": "control; controller; figure; model; point; set; system", "summary": "These controllers have a high popularity in the academy and in the industry because they provide high performance control systems without requiring interventions of operators for many hours. However, the most of industrial applications in chemical processes use ordinary feedback control systems (PID controller), which are single input single output systems (SISO) and exhibit linear actuation.", "mime": "application/pdf"}, {"id": "cet-2328", "words": "3018", "extension": ".pdf", "flesch": "50", "author": "Arrieta, L.; Obregon, L.G.; Valencia-Ochoa, G.", "title": "A Matlab-Based Program for the Design And Simulation of Wet Cooling Towers", "date": "2017", "keywords": "air; cooling; inlet; software; temperature; tower; water", "summary": "The contribution of this article is the development of an interactive educational software named CTw-UA v1.0 to design cooling towers that determine the number of decks from the packings, the tower efficiency, the air flow needed, the dimensions of the tower and the temperature profile inside the tower using the Mickley diagram. The following operating conditions were given for this experience: inlet water temperature (TL2)", "mime": "application/pdf"}, {"id": "cet-2329", "words": "2327", "extension": ".pdf", "flesch": "44", "author": "Ganci, F.; Inguanta, R.; Piazza, S.; Sunseri, C.; Lombardo, S.", "title": "Fabrication and Characterization of Nanostructured Ni and Pd Electrodes for Hydrogen Evolution Reaction (HER) in Water- Alkaline Electrolyzer", "date": "2017", "keywords": "electrodes; energy; hydrogen; nanoparticles; nws", "summary": "Conclusions In this work, we presented a simple method for fabricating nanostructured Ni electrodes based on electrodeposition inside the channels of a polycarbonate membrane acting as a template. Experimental For nanostructured Ni electrodes fabrication, commercial porous polycarbonate membrane (PCM - Whatman, Cyclopore, thickness 20 \u03bcm) has been used as a template.", "mime": "application/pdf"}, {"id": "cet-2330", "words": "3603", "extension": ".pdf", "flesch": "46", "author": "Ampelli, C.; Genovese, C.; Tavella, F.; Perathoner, S.; Centi, G.", "title": "Nano-Engineered Electrodes for the Generation of Solar Fuels: Benefits and Drawbacks of Adopting a Photo- Electrocatalytic (PECa) Approach", "date": "2017", "keywords": "ampelli; electrodes; fuels; peca; photo; production; solar", "summary": "PECa systems consist of compact devices, similar to fuel cells, with separated zones for the reactions of oxidation (photo-anode) and reduction (electro-cathode) (Hisatomi et al., 2014). One of the important challenges for the future commercialization of PECa cells is the preparation of active, robust and low-cost catalysts (Li and Wu, 2015), as well as a proper design of the configuration of the cell and the related catalytic electrodes (Zhao et al., 2016).", "mime": "application/pdf"}, {"id": "cet-2331", "words": "2995", "extension": ".pdf", "flesch": "45", "author": "Arenas-Diaz, J.P.; Palacio Lozano, D.C.; Ramirez, X.; Cabanzo, R.; Guzman, A.; Mejia-Ospino, E.", "title": "Chemical Characterization of Polar Species in Colombian Vacuum Residue and Its Supercritical Fluid Extraction Subfractions Using Electrospray Ionization FT-ICR Mass Spectrometry", "date": "2017", "keywords": "class; compounds; dbe; icr; mass; nitrogen; residue; species; vacuum", "summary": "It is known that the type of nitrogen compounds contained in petroleum samples is important due to the participation of these species in deactivation of catalysts used in hydrotreatment processes (Furimsky et al., 1999). Figure 1: Heteroatom class distribution for vacuum residue and its subfractions from positive-mode ESI FT- ICR MS Negative-mode ESI FT-ICR offers a selectively ionization of acid compounds and non-basic nitrogen compounds.", "mime": "application/pdf"}, {"id": "cet-2332", "words": "3241", "extension": ".pdf", "flesch": "54", "author": "Ramos, G.; Velasquez, P.; Acevedo, P.; Santis, A.; Rincon, J.; Lopez, A.", "title": "Electromagnetic Model for Determining the Speed of Absorptive Photonic in a Solar Collector in V (V-Collector)", "date": "2017", "keywords": "electromagnetic; flux; medium; model; suspension; \ud835\udc48( \ufffd", "summary": "Where \ufffd\u20d7\ufffd = (\ud835\udc65, \ud835\udc66, \ud835\udc67), \u210e\u20d7\u20d7 = (\u210e1, \u210e2, \u210e3) and \ud835\udc3d\ud835\udc67\ud835\udc48(\ufffd\u20d7\ufffd) is the Jacobian of \ud835\udc48 at the point \ufffd\u20d7\ufffd. This approach DOI: 10.3303/CET1757269 Please cite this article as: Ramos G., Velasquez P., Acevedo P., Santis A., Rincon J., Lopez A., 2017, Electromagnetic model for determining the speed of absorptive photonic in a solar collector in v (v-collector), Chemical Engineering Transactions, 57, 1609-1614 DOI: 10.3303/CET1757269 1609 is based on the directional dispersion in three axes, combined with the technique based on the ray-tracing for modeling of the incident radiation.", "mime": "application/pdf"}, {"id": "cet-2333", "words": "2713", "extension": ".pdf", "flesch": "48", "author": "Saebea, D.; Patcharavorachot, Y.; Hacker, V.; Assabumrungrat, S.; Arpornwichanop, A.; Authayanun, S.", "title": "Analysis of Unbalanced Pressure PEM Electrolyzer for High Pressure Hydrogen Production", "date": "2017", "keywords": "anode; cathode; density; electrolysis; electrolyzer; engineering; hydrogen; membrane; pem; pressure", "summary": "In this work, the PEM electrolyzer system to produce high pressure hydrogen with consideration of hydrogen permeation is theoretically investigated. The unbalanced pressure between the anode (2 bar) and cathode (10-100 bar) are applied to produce high hydrogen pressure and the effect of a hydrogen permeation is taken into account.", "mime": "application/pdf"}, {"id": "cet-2334", "words": "3366", "extension": ".pdf", "flesch": "48", "author": "Cocchiara, C.; Piazza, S.; Sunseri, C.; Inguanta, R.", "title": "Study of a Novel Electrochemical Method for Copper Recovery from Waste Printed Circuit Boards", "date": "2017", "keywords": "boards; chemical; circuit; copper; metals; pcbs; process; recovery; waste", "summary": "Then, PCB was cut in pieces of 10x10 cm and every piece was chemically treated to remove the solder mask and so expose copper metal to the electrolytic solution. In recent years, many researchers have investigated a number of innovative approaches on copper recovery to provide a real answer to the increasing requirements of environmental legislation, including biochemical and electrochemical methods.", "mime": "application/pdf"}, {"id": "cet-2335", "words": "3025", "extension": ".pdf", "flesch": "50", "author": "Saebea, D.; Authayanun, S.; Patcharavorachot, Y.; Soisuwan, S.; Assabumrungrat, S.; Arpornwichanop, A.", "title": "Performance Analysis of Solid-Oxide Electrolysis Cells for Syngas Production by H2O/CO2 Co-Electrolysis", "date": "2017", "keywords": "cathode; cell; co2; electrolysis; h2o; reaction; soec; temperature", "summary": "Among various types of the electrolysis cells, solid oxide electrolysis cells (SOECs) have received considerable attention because of theirs high efficiency and high feed impurity tolerance (Ferrero et al., 2013). Narasimhaiah G., Janardhanan V.M., 2013, Modeling CO2 electrolysis in solid oxide electrolysis cell, Journal of Solid State Electrochemistry, 17, 2361-2370.", "mime": "application/pdf"}, {"id": "cet-2336", "words": "2808", "extension": ".pdf", "flesch": "40", "author": "Lucas-Granados, B.; S\u00e1nchez-Tovar, R.; Fern\u00e1ndez-Domene, R.M.; Garcia-Anton, J.", "title": "Influence of the Heating Rate on the Annealing Treatment of Iron Oxide Nanostructures Obtained by Electrochemical Anodization under Hydrodynamic Conditions", "date": "2017", "keywords": "anodization; conditions; heating; iron; nanostructures; oxide; rpm; water", "summary": "In this work, electrochemical anodization of iron is used to form different iron oxide nanostructures, and the influence of different anodization parameters was studied in order to find the most suitable nanostructure for photocatalysis applications. In this way, the formation of some vortex over the anode is DOI: 10.3303/CET1757273 Please cite this article as: Lucas-Granados B., S\u00e1nchez-Tovar R., Fern\u00e1ndez-Domene R.M., Garcia-Anton J., 2017, Influence of the heating rate on the annealing treatment of iron oxide nanostructures obtained by electrochemical anodization under hydrodynamic conditions, Chemical Engineering Transactions, 57, 1633-1638 DOI: 10.3303/CET1757273 1633 avoided, and consequently, the surface of the electrode is stirred and anodized homogeneously.", "mime": "application/pdf"}, {"id": "cet-2337", "words": "3023", "extension": ".pdf", "flesch": "42", "author": "Sotgiu, G.; Montanaro, D.; Orsini, M.; Petrucci, E.", "title": "Manganese-Containing Mixed Oxide Electrodes as Anode Materials for Degradation of Model Organic Pollutants", "date": "2017", "keywords": "chloride; electrodes; methyl; mnox; orange; oxides; removal; ruox", "summary": "For instance, electrodes were prepared for electrochemical capacitor (Wen et al., 2009) or for oxygen evolution reaction (Browne et al., 2016). Figure 3: Cyclic voltammograms of RuOx-MnOx-CuOx electrode (a) and RuOx-MnOx-CoOx electrode (b).", "mime": "application/pdf"}, {"id": "cet-2338", "words": "3371", "extension": ".pdf", "flesch": "62", "author": "Duque-Alvarez, A.E.; Lopez-Sesenes, R.; Contreras-Valenzuela, M.R.; Martinez-Oropeza, A.; Vera-Dimas, J.G.; Zheludkevich, M.", "title": "Synergistic Inhibition Effect of Rare Earth in the Corrosion of the AA2024-T3 and CFRP in Galvanic Couple", "date": "2017", "keywords": "aa2024; ata; bta; cfrp; corrosion", "summary": "1. Introduction Aluminium alloy AA2024-T3 is one of the longest used in the aerospace industry due to its low weight and corrosion resistance (Rodi\u010d and Milo\u0161ev, 2016). A sample of AA2024-T3 with an exposed area of 0.5 cm2 was used as working electrode 1 and a plate of CFRP with 0.5 cm2 of exposed area as working electrode 2.", "mime": "application/pdf"}, {"id": "cet-2441", "words": "2329", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-2441", "date": null, "keywords": "co2; factor; oil; recovery; reservoir; wag", "summary": "Global Energy Institute, 2012, CO2 enhanced oil recovery, Global Energy Institute, Washington, DC, USA. The relationship between oil recovery factor and producing time for all cases is shown in Figure 2.", "mime": "application/pdf"}, {"id": "cet-2442", "words": "3037", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-2442", "date": null, "keywords": "gas; gasification; model; reaction; steam", "summary": "Figure 6: Distribution of char gasification reaction rate velocity with operating conditions (A): S/A = 0; (B): S/A = 0.25; (C): S/A = 0.5; (D): S/A = 0.75 (a) (b) 227 In Figure 6, the reaction rate of char gasification in the case of more steam had taken place intensively. Figure 7: Distribution of water gas shift reaction rate with operating conditions (A): S/A = 0; (B): S/A = 0.25; (C): S/A = 0.5; (D): S/A = 0.75 Similarly, in the computational results, the water gas shift reaction rate had taken place severely in the case where the steam and air ratio were 0.75.", "mime": "application/pdf"}, {"id": "cet-2443", "words": "2544", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-2443", "date": null, "keywords": "co2; mae; mea; solubility; solution", "summary": "Singh P., Brilman D.W.F., Groeneveld M.J., 2011, Evaluation of CO2 solubility in potential aqueous amine- based solvents at low CO2 partial pressure, International Journal of Greenhouse Gas Control, 5, 61-68. Yamada H., Chowdhury F.A., Goto K., Higashii T., 2013, CO2 solubility and species distribution in aqueous solutions of 2-(Isopropylamino)ethanol and its structural isomers, International Journal of Greenhouse Gas Control, 17, 99\u2013105.", "mime": "application/pdf"}, {"id": "cet-2444", "words": "3715", "extension": ".pdf", "flesch": "20", "author": null, "title": "cet-2444", "date": null, "keywords": "bim; building; construction; cost; estimates; estimating; information; project; quantity; surveyors; technology", "summary": "One of the most significant tasks identified contributing towards unsustainability in the quantity surveying practice is the establishment of construction cost estimates. Peurifoy R., Oberlender G., 2002, Estimating construction costs (5th ed.), McGraw-Hill, New York, United States.", "mime": "application/pdf"}, {"id": "cet-2445", "words": "3237", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-2445", "date": null, "keywords": "carbon; eco; green; national; production; products; scp; thailand", "summary": "For the green hotel label, the requirements are related to the green policy, green product procurement, energy management, and local participation in environmental conservation activities at the area of hotel\u2019s location. This will transform the consideration of embedding energy associated with raw material production and production process stages to the life cycle GHG emissions of building material products (Tan and Foo, 2009).", "mime": "application/pdf"}, {"id": "cet-2446", "words": "2566", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-2446", "date": null, "keywords": "hemp; hempstone; materials; number; resin; scraps; stalk", "summary": "Hemp materials and artificial stone scraps were used at different proportions to develop a new composite called Hempstone. 2. Methodology 2.1 Goal and scope This LCA study aims at exploring a potential use of hemp stalks remaining after fibre extraction as \u201cHempstone\u201d solid surface for buildings\u2019 interior applications.", "mime": "application/pdf"}, {"id": "cet-2447", "words": "3618", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-2447", "date": null, "keywords": "biogas; energy; heat; mill; oil; palm; palm oil", "summary": "The establishment of feed-in-tariff has successfully increased the number of palm oil mills that are completed with biogas facilities. The biogas generation from POME anaerobic digestion in palm oil mill could be effectively exploited to provide alternative source of energy for the rural electrification (Lee et al., 2017).", "mime": "application/pdf"}, {"id": "cet-2448", "words": "3075", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-2448", "date": null, "keywords": "air; figure; living; occupants; temperature; usage", "summary": "Figure 6: Comparison between number of AC usage events per day and total duration of AC usage per day for 63 dwellings 0 1 2 3 4 0 3 6 9 12 15 18 A v e ra g e n u m b e r o f A C e v e n ts ( ti m e s / Figure 7: Comparison between number of AC usage events per day and total duration of AC usage in a day classified by working days and holidays for (a) 33 living rooms and (b) 42 bedrooms The probability density of indoor air temperature before and during the occupants switch on and the AC operation in dwellings is shown in Figure 8.", "mime": "application/pdf"}, {"id": "cet-2449", "words": "3291", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-2449", "date": null, "keywords": "biogas; cng; cost; path; pipeline; pressure; purification; technology; transportation", "summary": "Result and discussion Based on the data on technology cost, the cost for AD, PT, compressor (PT to transportation), transportation, and compressor (transportation to utilisation) is calculated and tabulated in Table 4. Sun Q., Li H., Yan J., Liu L., Yu Z., Yu X., 2015, Selection of appropriate biogas upgrading technology - A review of biogas cleaning, upgrading and utilisation, Renewable and Sustainable Energy Reviews, 51, 521-532.", "mime": "application/pdf"}, {"id": "cet-2450", "words": "3524", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-2450", "date": null, "keywords": "analysis; capacity; energy; plant; resource; system; water", "summary": "Through the case study, it can be concluded that WENCA is capable to determine the WTP capacity, water storage capacity, fuel cell capacity and battery capacity with better accuracy. The energy, DRt E and water demand, DRt W by the residential are as shown in Figure 2.", "mime": "application/pdf"}, {"id": "cet-2451", "words": "3536", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-2451", "date": null, "keywords": "carbon; city; dan; emissions; energy; footprint; ghg; municipality; sai; waste", "summary": "Evaluation of GHG emission in the city was studied by many researchers. System boundary is defined along with the administrative boundary of the city, GHG emissions released from the city activity in 2015 are collected and expressed as ton CO2 equivalent (tCO2eq).", "mime": "application/pdf"}, {"id": "cet-2452", "words": "3709", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-2452", "date": null, "keywords": "exergy; heat; pinch; process; pta; shaft; temperature; work", "summary": "By converting the heat cascade of the GCC pockets, minimum exergy loss targets may be determined as 0.48 kW below the exergetic Pinch and 3.94 kW above the exergetic Pinch, which is a total of 4.42 kW. 3.6 Step 6: Potential Shaft Work Determination After determining exergy loss in the system, the compressor shaft work is calculated using Eq(4). This paper presents a combined energy analysis technique of Pinch Analysis and Exergy Analysis to determine exergy losses and compressor shaft work targeting in sub-ambient processes via a novel numerical approach known as the Exergy Problem Table Algorithm (Ex-PTA).", "mime": "application/pdf"}, {"id": "cet-2453", "words": "3796", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-2453", "date": null, "keywords": "construction; industry; lc tools; project; quality; tools", "summary": "Construction waste gives an enormous impact on project costs and time of any of construction projects (Nagapan et al., 2012). A questionnaire survey conducted to ascertain the perspective of the LC tools to promote a better quality of construction project for the Malaysian construction industry.", "mime": "application/pdf"}, {"id": "cet-2618", "words": "3373", "extension": ".pdf", "flesch": "42", "author": "Souza, L.C.; Santos, S.C.; Montes, D.C.; Souza, R.C.; Matos, J.L.; Chinalia, F.A.; Quintella, C.M.; Almeida, P.F.", "title": "Microbiological Strategies for Sustainable Production of Bioactive Compounds Using Oil Produced Water Effluent with Sucrose and Crude Glycerine as Carbon Sources", "date": "2018", "keywords": "aeruginosa; amnigenus; bioactive; oil; production; viscosity", "summary": "The use of these residues allows for the reduction of production costs and minimizes environmental problems, since their use can lower the generation of effluents, such as the use of crude glycerin as a source of carbon, helping to reduce sucrose and produce water at the same time. After 72 hours, exopolysaccharide production, viscosity of the cell-free broth, rhamnolipid production and emulsification index of the cell-free broth were evaluated.", "mime": "application/pdf"}, {"id": "cet-2619", "words": "3822", "extension": ".pdf", "flesch": "52", "author": "Roestorff, M.; Chirwa, E.", "title": "Bacterial Cr(VI) Reduction with Internal Carbon Recirculation Using Freshwater Algae as Primary Producers", "date": "2018", "keywords": "algae; bacteria; carbon; concentration; cr(iii; cr(vi; reduction; system", "summary": "Several species of bacteria have been shown to reduce Cr(VI) to Cr(III) either as metabolic necessity or as detoxification strategy for survival. In this study, a well-studied locally isolated culture of bacteria is utilised to reduce Cr(VI) to Cr(III) while growing on carbon sources produced as algal metabolites.", "mime": "application/pdf"}, {"id": "cet-2620", "words": "4044", "extension": ".pdf", "flesch": "48", "author": "Barbera, E.; Sforza, E.; Canella, S.; Franceschetti, P.; Bertucco, A.", "title": "A Combined Evaporation and Microalgal Cultivation Approach for Efficient Treatment of Landfill Leachate: Batch and Continuous Experiments and Process Simulation", "date": "2018", "keywords": "concentration; experiments; growth; l-1; leachate; nh3; process; water", "summary": "A possible way to avoid or reduce the issues related to direct cultivation in raw leachate could be the integration of microalgae with an innovative, low-energy DOI: 10.3303/CET1864078 Please cite this article as: Barbera E., Sforza E., Canella S., Franceschetti P., Bertucco A., 2018, A combined evaporation and microalgal cultivation approach for efficient treatment of landfill leachate: batch and continuous experiments and process simulation, Chemical Engineering Transactions, 64, 463-468 DOI: 10.3303/CET1864078 463 technology developed by Solwa SrL for leachate treatment, i.e. the WastWa process. In the recently emerging context that aims at integrating waste management with the production of valuable resources, the use of microalgae for N removal from landfill leachate appears particularly fit, by producing biomass that can be destined to various applications.", "mime": "application/pdf"}, {"id": "cet-2621", "words": "3620", "extension": ".pdf", "flesch": "52", "author": "Suarez Rivero, D.; Marin Mahecha, O.; Ortiz Aguilar, J.; Puentes, A.; Agudelo Gutierrez, L.D.; Suarez Rivero, M.", "title": "Use of Biotechnology as Generator of Resistance Mechanism to Water Stress in the Rosa Productive Chain (Rosa indica L. var. Classy)", "date": "2018", "keywords": "biomass; conditions; dry; leaf; liplant; plants; potential; stress; v.v; water", "summary": "Therefore, the main objective of this research was to evaluate the effect of biofertilization with Liplant on the growth, development and water relations of rose plants, exposed to water stress conditions. It was observed that the index evaluated were significantly affected by the pre- established drought conditions, clearly showing a decrease of the biomass in the aerial parts of the plant, being more remarkable in plants without application of Liplant.", "mime": "application/pdf"}, {"id": "cet-2622", "words": "3094", "extension": ".pdf", "flesch": "53", "author": "Bosco, F.; Mollea, C.; Marmo, L.", "title": "Application of Scenedesmus obliquus in the Treatment of a Real Wastewater", "date": "2018", "keywords": "biomass; concentration; growth; medium; obliquus; rww", "summary": "The obtained values clearly show the inhibition effect of the higher NaHCO3 concentrations (75 and 100 mM) on S. obliquus growth. 3. Results and Discussion 3.1 Flask tests with PP modified medium", "mime": "application/pdf"}, {"id": "cet-2623", "words": "3441", "extension": ".pdf", "flesch": "49", "author": "Nino, Y.; Vega, L.; Ruiz, B.", "title": "Evaluation of the Energy Potential of the Gorse (Ulex Europaeus) in the Generation of Electrical Energy by Gasification", "date": "2018", "keywords": "biomass; bogot\u00e1; control; energy; gasification; gorse; kwh; potential; power; production; species", "summary": "Then again, for energy production has been research the use of gorse in the production of biogas. In this article, we propose the exploitation of the high heat value of the Gorse trunks in the production of electric energy through gasification, evaluating its energetic potential, to determine the energetic potential, the physiochemical characterization and adequacy of the gorse trunks.", "mime": "application/pdf"}, {"id": "cet-2624", "words": "3632", "extension": ".pdf", "flesch": "40", "author": "Dvoretsky, D.; Dvoretsky, S.; Temnov, M.; Markin, I.; Bushkovskaya, A.; Golubyatnikov, O.; Ustinskaya, Y.", "title": "Technology of Using Municipal Wastewater for Obtaining Chlorella Vulgaris Biomass with High Lipid Content for Biofuel Production", "date": "2018", "keywords": "autumn; c-2; concentration; cultivation; microalgae; summer; vulgaris; wastewater", "summary": "Thus, different strains of microalgae with different degrees of efficiency purify municipal wastewater from cities located at different geographical latitudes, and therefore, studies to assess the effectiveness of strains for wastewater treatment and their ability to accumulate lipids are relevant. The possibility of using municipal wastewater for cultivation of Chlorella vulgaris microalgae was investigated.", "mime": "application/pdf"}, {"id": "cet-2625", "words": "3118", "extension": ".pdf", "flesch": "45", "author": "Spina, F.; Spini, G.; Poli, A.; Romagnolo, A.; Zanellati, A.; Bentivegna, N.G.; El-Azhari, N.; Regnier, T.; Blieux, A.L.; Echairi, A.; Prigione, V.; Puglisi, E.; Varese, G.C.", "title": "Screening of Anionic Biosurfactants Production among Fungi and Bacteria", "date": "2018", "keywords": "+ +; bacteria; biosurfactants; blue; fungi; pseudomonas", "summary": "DOI: 10.3303/CET1864083 Please cite this article as: Spina F., Spini G., Poli A., Romagnolo A., Zanellati A., Bentivegna N.G., El-Azhari N., Regnier T., Blieux A.L., Echairi A., Prigione V., Puglisi E., Varese G.C., 2018, Screening of anionic biosurfactants production among fungi and bacteria, Chemical Engineering Transactions, 64, 493-498 DOI: 10.3303/CET1864083 493 Biosurfactants have hydrophilic (polar) and hydrophobic (non-polar) groups, helping to weaken the surface tension between water and oil or non-polar solutions. Interestingly anionic biosurfactants production was species dependent but also strain dependent.", "mime": "application/pdf"}, {"id": "cet-2626", "words": "3269", "extension": ".pdf", "flesch": "47", "author": "Rodriguez, A.; Zuleta, J.; Garzon, A.; Avendano, S.; Alvarez, Y.; Cabeza, I.; Santis, A.; Acevedo, P.", "title": "Anaerobic Co-digestion of Pig Manure, Organic Fraction of Municipal Solid Waste, Fruit Residues of Drinks Industry and Cocoa Residues", "date": "2018", "keywords": "gsv; industry; methane; mixtures; production; residues; waste", "summary": "The study is centered on the evaluation of municipal solid waste (MSW), bottled beverage industry waste (BBIW), pig manure (PM) and cocoa industry waste (CIW), under the effect of DOI: 10.3303/CET1864084 Please cite this article as: Rodriguez A., Zuleta J., Garzon A., Avenda\u00f1o S., Alvarez Y., Cabeza I., Santis A., Acevedo P., 2018, Anaerobic codigestion of pig manure, organic fraction of municipal solid waste, fruit residues of drinks industry and cocoa residues, Chemical Engineering Transactions, 64, 499-504 DOI: 10.3303/CET1864084 499 the agitation in discontinuous reactors and thus to find sources of use of them and as a contribution to the knowledge in subjects of anaerobic co-digestion (Toro et al., 2017). Conclusions According to the four residues evaluated (pig manure, municipal solid waste, cocoa industry waste and bottled beverage industry waste), it is observed that the mixtures that generated higher methane are those who contain pig manure (PM) and bottled beverage industry waste (BBIW).", "mime": "application/pdf"}, {"id": "cet-2627", "words": "3575", "extension": ".pdf", "flesch": "43", "author": "Igboamalu, T.E.; Chirwa, E.", "title": "As(III) Oxidation and Electron Mass Transfer Kinetic in an Enriched Mixed Culture of Bacillus sp., and Exiguobacterium sp., Isolated from Cow Dip in South Africa", "date": "2018", "keywords": "arsenic; arsenite; as(iii; as(v; concentration; efficiency; oxidation; south", "summary": "Within 120 hrs. of incubation, 16 % As(III) oxidation efficiency was achieved at pH of 10, followed by 30% at pH 4 and 50% at pH of 1, Figure 3 b. High As(III) oxidation efficiency (99%) was seen at pH of \u2264 7\u00b13, suggesting the oxidation As(III) to As(V) is optimum at neutral pH. At pH of 1, it is not clearly understood why 50 % As(III) oxidation was achieved under acidic condition since As(III) dominates at pH range from 6-9. Microbial., 76, 6804-6811 Suttigarn A., Wang Y.T.,2005, Arsenite oxidation by, Alcaligenes faecalis strain O1201, Journal of Environmental Engineering, 31,1293-1301.", "mime": "application/pdf"}, {"id": "cet-2628", "words": "3527", "extension": ".pdf", "flesch": "47", "author": "Forero, D.; Pena, C.; Acevedo, P.; Hernandez, M.; Cabeza, I.", "title": "Biofiltration of Acetic Acid Vapours Using Filtering Bed Compost from Poultry Manure - Pruning Residues - Rice Husks", "date": "2018", "keywords": "acid; bed; biodegradability; biofilter; biofiltration; composting; concentration; figure; moisture; pruning; removal", "summary": "A biofiltration battery was used to evaluate acetic acid removal efficiency from an air stream through the composting beds. Filter media evaluation was performed through exposure to different concentrations of acetic acid vapours (industrial grade): Days 1-11 started with acetic acid concentration of 7.240 ppm; days 12-15 acetic acid concentration was increased to 10,860 ppm; days 16-25 an acetic acid concentration of 14,480 ppm.", "mime": "application/pdf"}, {"id": "cet-2629", "words": "2987", "extension": ".pdf", "flesch": "48", "author": "Guiza-Franco, L.; Orozco-Rojas, L.G.; Sanchez-Galvis, M.; Garcia-Martinez, J.B.; Barajas-Ferreira, C.; Zuorro, A.; Barajas-Solano, A.F.", "title": "Production of Chlorella vulgaris Biomass on UV-treated Wastewater as an Alternative for Environmental Sustainability on High-Mountain Fisheries", "date": "2018", "keywords": "aquaculture; biomass; concentration; experiments; lamps; nitrogen; production; treatment; wastewater", "summary": "Options for the treatment of aquaculture wastewater have been sought over the years. On the other hand, biomass results show that aquaculture wastewater is rich enough in nutrients; therefore, apparently does not require to be supplemented with different micro and macronutrients (except nitrogen) for the production of microalgae.", "mime": "application/pdf"}, {"id": "cet-2630", "words": "3063", "extension": ".pdf", "flesch": "49", "author": "Makgato, S.; Chirwa, E.", "title": "Desulphurization of Medium Sulphur Waterberg Steam Coal in a Batch Operated Scale: Microbial Solution", "date": "2018", "keywords": "coal; content; day; desulphurization; power; process; samples; sulphur", "summary": "Therefore, limited information is available on the use of biological process in coal desulphurization prior to combustion. Coal samples used in the current study were supplied by one of South African Power Utility, Eskom power station as received from the nearby Waterberg coalfield in Limpopo in South Africa.", "mime": "application/pdf"}, {"id": "cet-2631", "words": "3347", "extension": ".pdf", "flesch": "46", "author": "Mtimunye, P.J.; Chirwa, E.", "title": "Biological U(VI) Reduction in a Fixed-bed Bioreactor Using Radiotoxic Tolerant Mixed-Culture of Bacteria", "date": "2018", "keywords": "biofilm; concentration; effluent; reactor; removal; species; total; treatment; u(vi; uranium", "summary": "Figure 1: Continuous-flow system laboratory se 2.4 Start-up and operating of biofilm reactor The results from this study showed the ability of the fixed-bed biofilm reactor in sustaining high U(VI) concentrations of up to 85 mg/L, much higher than that observed at the study site.", "mime": "application/pdf"}, {"id": "cet-2632", "words": "2878", "extension": ".pdf", "flesch": "52", "author": "Birungi, Z.; Chirwa, E.", "title": "Bioremediation of Toxic Metals and Recovery of Target Metals from Actual Wastewater using Algal Sorbents", "date": "2018", "keywords": "adsorption; biosorption; industrial; metals; wastewater", "summary": "These technologies seem to operate relatively well for effluents containing higher metal concentrations \u2265 100 mg/L. DOI: 10.3303/CET1864090 Please cite this article as: Birungi Z., Chirwa E., 2018, Bioremediation of toxic metals and recovery of target metals from actual wastewater using algal sorbents, Chemical Engineering Transactions, 64, 535-540 DOI: 10.3303/CET1864090 535 Conventional treatment technologies such as sand filtration, GAC adsorption, precipitation-sedimentation, flotation, ion-exchange, and electrochemical deposition systems have been used for decades for the removal of toxic heavy metals wastewater.", "mime": "application/pdf"}, {"id": "cet-2633", "words": "3379", "extension": ".pdf", "flesch": "45", "author": "Almeida, D.; Soares Da Silva, R.D.C.; Brasileiro, P.; Luna, J.; Silva, M.D.G.; Rufino, R.; Costa, A.; Dos Santos V, A.; Sarubbo, L.", "title": "Application of a Biosurfactant from Candida tropicalis UCP 0996 Produced in Low-Cost Substrates for Hydrophobic Contaminants Removal", "date": "2018", "keywords": "biosurfactant; oil; surface", "summary": "The literature has little to offer about oil removal on porous surfaces. Stone washing tests showed 46.02 and 56.18 % removal at 2xCMC and 5xCMC of biosurfactant concentration, respectively, and testing for oil biodegradation showed results around 73.8 % for motor oil biodegradation by indigenous marine bacteria and fungi from the Suape Petrochemical Complex seawater, Pernambuco State, Brazil.", "mime": "application/pdf"}, {"id": "cet-2634", "words": "3248", "extension": ".pdf", "flesch": "34", "author": "Silva, E.; Chaprao, M.J.; Silva, I.; Brasileiro, P.; Almeida, D.; Luna, J.; Rufino, R.; Dos Santos V, A.; Sarubbo, L.", "title": "Biosurfactant Application as Alternative Collectors in Dissolved Air Flotation System", "date": "2018", "keywords": "biosurfactant; daf; efficiency; flotation; flow; oil; removal; separation; water", "summary": "Table 1: Experimental range and levels of independent variables for oil removal efficiency in the pilot scale DAF system with use of the biosurfactant Levels Oily Water Flow (X1)* Microbubble Flow (X2)* Biosurfactant Flow (X3)* Figure 3 displays the fitted response surface plots for oil removal efficiency shown by Pareto diagram of the statistically significant interactions.", "mime": "application/pdf"}, {"id": "cet-2635", "words": "3834", "extension": ".pdf", "flesch": "43", "author": "Silva, I.; Resende, A.H.; Silva, N.; Brasileiro, P.; Pedrosa Didier, J.; Luna, J.; Rufino, R.; Dos Santos V, A.; Sarubbo, L.", "title": "Aplication of Biosurfactants Produced by Bacillus cereus and Candida sphaerica in the Bioremediation of Petroleum Derivative in Soil and Water", "date": "2018", "keywords": "biosurfactant; cereus; days; oil; sphaerica", "summary": "A key factor that regulates the success of biosurfactants production is the development of an economical process that uses low cost materials and offers a high yield. The media were autoclaved at 121 \u00b0C for 20 min. Fermentations for biosurfactants production were carried out in 1 L Erlenmeyer flasks containing 500 mL of the production media and incubated with 1 % of Candida sphaerica and 5 % of Bacillus cereus from pre- inoculum.", "mime": "application/pdf"}, {"id": "cet-2636", "words": "2533", "extension": ".pdf", "flesch": "43", "author": "Luna, J.; Pinto, A.A.; Pinto, M.I.; Brasileiro, P.; Rufino, R.; Almeida, D.; Dos Santos V, A.; Sarubbo, L.", "title": "Production in Bioreactor and Application of Biosurfactant in Dissolved Air Flotation for the Treatment of Industrial Effluents", "date": "2018", "keywords": "biosurfactant; daf; flotation; flow; oil; sarubbo; separation", "summary": "Thus, this study investigated the potential application of a biosurfactant in the separation of residual oil using a prototype of DAF. Thus, this study investigated the potential application of a biosurfactant as an alternative collector in the separation of residual oil using a prototype of the Dissolved Air flotation DAF.", "mime": "application/pdf"}, {"id": "cet-2637", "words": "3503", "extension": ".pdf", "flesch": "50", "author": "Dermouchi, A.; Lendormi, T.; Arris, S.; Lanoiselle, J.L.; Bencheikh-Lehocine, M.", "title": "Cutting Oil Emulsion Anaerobic Biodegradation: Electrocoagulation Pretreatment Effect", "date": "2018", "keywords": "anaerobic; cod; coe; emulsion; methane; oil; pretreatment; samples; synthetic; turbidity", "summary": "Sodium Chloride (NaCl) at a concentration of 1.5 g / L was added to cutting oil samples to increase electrical conduction for the EC pretreatment (Khemis et al., 2005).The characteristics of cutting oil emulsion samples are presented in table 1. Spent cutting oil emulsion samples were stored at 4\u00b0C in a fridge before further use.", "mime": "application/pdf"}, {"id": "cet-2638", "words": "3807", "extension": ".pdf", "flesch": "49", "author": "Suarez Rivero, D.; Marin Mahecha, O.; Ortiz Aguilar, J.; Puentes, A.; Ballesteros, L.; Suarez Rivero, M.", "title": "Biotechnology as a Tool for the Agroindustrial Exploitation of Residues of the Chain of Musa spp.", "date": "2018", "keywords": "analysis; blocks; chemical; material; process; pseudostem; silage", "summary": "2.4 Preparation of nutritional blocks For each stem from San Francisco and Tiban\u00e1, two types of blocks (with four replicates each) were elaborated, whose difference lies mainly in the state of raw material with which the blocks were constituted: pseudostem dehydrated \u2013 silage. The results showed a reduction of the lignin level, an increase of the protein content up to 30%, as well as a decrease in the percentage of Neutral Detergent Fiber - NDF, converting of pseudostem blocks into a food supplement with great potential of use in the animal feed and with this in an alternative to mitigate the negative impact of the disposal of these residues in the environment.", "mime": "application/pdf"}, {"id": "cet-2639", "words": "3770", "extension": ".pdf", "flesch": "43", "author": "Dvoretsky, D.; Dvoretsky, S.; Temnov, M.; Markin, I.; Akulinin, E.; Bushkovskaya, A.; Ustinskaya, Y.", "title": "Technology of Wastewater Use For L-Lactic Acid Biosynthesis", "date": "2018", "keywords": "acid; casei; coagulans; cultivation; culture; fluid; vulgaris; wastewater", "summary": "On the basis of the experimental data obtained using the equations of Verhulst and Monod- Yerusalimsky, a mathematical model of the process of culturing lactic acid bacteria has been identified, describing the kinetics of growth of lactic acid bacteria, the loss of the carbon-containing substrate and the accumulation of lactic acid. For this purpose the following tasks have been solved: 1) lactic acid biosynthesis using filtrate after the cultivation of microalgae in wastewater for the strains B. coagulans B-10468 and Lactobacillus casei (L. casei) B-3241 has been researched; 2) a comparative analysis of the biosynthesis of lactic acid on nutrient media based on microalgae-treated wastewater and wastewater after traditional biological treatment with activated sludge has been carried out; 3) a mathematical model describing the growth of the biomass of lactic acid bacteria, kinetics of lactic acid accumulation, and consumption of the substrate has been developed, and model parameters were experimentally determined.", "mime": "application/pdf"}, {"id": "cet-2640", "words": "4178", "extension": ".pdf", "flesch": "48", "author": "Peens, J.; Wu, Y.; Brink, H.", "title": "Microbial Pb(II) Precipitation: The Influence of Elevated Pb(II) Concentrations", "date": "2018", "keywords": "broth; concentration; experiments; lead; pb(ii; ppm; precipitate; removal; serum", "summary": "Examples of Pb concentrations in industry include 2 g/L Pb in battery wastewater (Singh et al., 2007) and 100 g/L Pb in 586 hydrometallurgy streams (Lee et al., 1986). The purpose of the current study was to determine the impact elevated Pb concentrations has on microbial precipitation in the endeavour of advancing microbial Pb precipitation as a method for Pb bioremediation, recovery, and processing.", "mime": "application/pdf"}, {"id": "cet-2641", "words": "2981", "extension": ".pdf", "flesch": "54", "author": "Soares, C.E.D.S.; Weber, A.; Moecke, E.S.; Reiter, M.G.; Scussel, V.M.; Krebs De Souza, C.", "title": "Use of Ozone Gas as a Green Control Alternative to Beetles Alphitobius diaperinus (Panzer) Infestation in Aviary Bed Utilized in the Poultry Industry", "date": "2018", "keywords": "adult; application; beetles; control; diaperinus; gas; insects; larvae; ozone; poultry", "summary": "O3 gas insects mortality confirmation - insects death confirmation per O3 gas concentration and exposure were registered. The aim of this study was to determine the efficacy of O3 gas treatment to eliminate beetles A. diaperinus development both, at adult and larvae stages.", "mime": "application/pdf"}, {"id": "cet-2642", "words": "3540", "extension": ".pdf", "flesch": "47", "author": "Pinto, M.I.; Ribeiro, B.; Guerra, J.M.C.; Rufino, R.; Sarubbo, L.; Dos Santos V, A.; Luna, J.", "title": "Production in Bioreactor, Toxicity and Stability of a Low-cost Biosurfactant", "date": "2018", "keywords": "biosurfactant; candida; luna; medium; oil; production; sarubbo; surface; tension", "summary": "The genus Candida has been prominent in the production of biosurfactants, either for potential industrial use (Bourdichon et al., 2012) or in the use of industrial residues for optimization in the production of them (Sarubbo et al., 2006, 2007; Santos et al., 2014; Gao et al., 2013; Rufino et al., 2008; Campos et al., 2013; Luna et al., 2013; Sobrinho et al., 2013; Rocha e Silva et al., 2014). The possibility of producing biosurfactants from renewable substrates and different microbial species, besides the possibility of varying cultural parameters such as cultivation time, stirring speed, medium pH and added nutrients, allows to obtain compounds with structural characteristics and different physical properties, which make them comparable or superior to synthetic surfactants in terms of efficiency, although the production costs still do not allow a greater competitiveness with the synthetic (Coimbra et al., 2009; Sarubbo et al., 2015).", "mime": "application/pdf"}, {"id": "cet-2643", "words": "3826", "extension": ".pdf", "flesch": "52", "author": "Yue, Zhang; Bo, Song; Zaiqiang, Liu; Siyu, Lei", "title": "Identification of Key Patches for Biodiversity Conservation Based on Possibility of Connectivity Method", "date": "2018", "keywords": "area; biodiversity; connectivity; ecosystem; land; landscape; method; patches; use; value", "summary": "There are a variety of definitions for connectivity, which can be divided into two categories: 1) one referred to the spatial continuity of landscape patches, corridors and matrix (Pelorossoa et al., 2016) which tended to reflect the structure of landscape; 2) the other meaning was the smooth degree of ecological processes between patches (Taylor et al., 1993), which was DOI: 10.3303/CET1864101 Please cite this article as: Yue Zhang , Bo Song , Zaiqiang Liu , Siyu Lei , 2018, Identification of key patches for biodiversity conservation based on possibility of connectivity method, Chemical Engineering Transactions, 64, 601-606 DOI: 10.3303/CET1864101 601 defined from the perspective of landscape functions. The conventional method considers patch area as the only factor that related to biodiversity value.", "mime": "application/pdf"}, {"id": "cet-2644", "words": "2945", "extension": ".pdf", "flesch": "39", "author": "Zhiyou, Li; Jiashun, Wang; Jingwu, Zhai", "title": "Study on Changes of Chemical Components and Antioxidant Activity of Cherry Wine during Fermentation", "date": "2018", "keywords": "alcohol; anti; cherry; content; fermentation; flavonoids; oxidation; polyphenols; scavenging; wine", "summary": "When the cherry fruit in the 611 fermentation process, the yeast fermentation, most of the sugar into alcohol; flavonoids, polyphenols, although alcohol-soluble, but because cherry alcohol wine fermentation broth is not very high, and because of its easy oxidation, In the fermentation process its content decreased slowly after one day of fermentation until it remained unchanged; through the experimental results of protein and free amino acids, we can see that some of the protein is decomposed into free amino acids. ISBN 978-88-95608- 56-3; ISSN 2283-9216 Study on Changes of Chemical Components and Antioxidant Activity of Cherry Wine during Fermentation Zhiyou Li, Jiashun Wang, Jingwu Zhai College of Agriculture, Anshun University, Anshun 561000, China Sbscdhcd@126.com Using cherry as raw material, the anti-oxidation of cherry wine with different alcoholicity, vitamin C and time was determined and analyzed before and after the fermentation process, and the changes of antioxidant capacity in cherry juice before and after fermentation and during fermentation.", "mime": "application/pdf"}, {"id": "cet-2645", "words": "2848", "extension": ".pdf", "flesch": "50", "author": "Shuying, Gao; Xiaoning, Tang", "title": "Impact Mechanism of Marine Biofilm on Concrete Durability", "date": "2018", "keywords": "biofilm; chloride; concrete; death; doi; marine; surface; test", "summary": "A test is designed to make a comparative analysis on the resistance of marine biofilm to chloride permeability in two cases that the biofilm is active and inactive. DOI: 10.3303/CET1864103 Please cite this article as: Shuying Gao , Xiaoning Tang , 2018, Impact mechanism of marine biofilm on concrete durability, Chemical Engineering Transactions, 64, 613-618 DOI: 10.3303/CET1864103 613 ( )2+ - 2 Fe +2OH Fe OH\u2192 (3) ( ) ( )2 22 3 4Fe OH +O +2H O", "mime": "application/pdf"}, {"id": "cet-2646", "words": "2960", "extension": ".pdf", "flesch": "43", "author": "Shuai, Zhang; Lei, Chen", "title": "Mechanism and Application of Photocatalytic Hydrogen Generation by Cobalt Oximes", "date": "2018", "keywords": "co1; cobalt; coii; hydrogen; process; production", "summary": "However, the lack of theoretical study on the charge transport path and its mechanism in catalytic hydrogen production badly restricts the hydrogen production efficiency. A nucleophilic CoI midbody interacts with protons to form hydride CoIIIH, namely: CoIII + e-1 \u2192 CoII; CoII + e-1 \u2192 CoI; CoI + H+ \u2192 CoIIIH Subsequently, the path for catalytic hydrogen production is not unique.", "mime": "application/pdf"}, {"id": "cet-2647", "words": "3695", "extension": ".pdf", "flesch": "49", "author": "Di Caprio, F.; Altimari, P.; Iaquaniello, G.; Toro, L.; Pagnanelli, F.", "title": "T. obliquus Mixotrophic Cultivation in Treated and Untreated Olive Mill Wastewater", "date": "2018", "keywords": "concentration; cultivation; growth; microalgae; omw; pre; test", "summary": "An indication of the heterotrophic metabolism was given by the pH measured during cultivation, that was already 11 after 2 days of cultivation for both phototrophic test and test with pre-treated OMW, while remained around 7 for untreated OMW (Figure 3B). While phototrophic test and test with pre-treated OMW showed the same growth rate, a relevant lower value was obtained for untreated OMW (Table 2).", "mime": "application/pdf"}, {"id": "cet-2648", "words": "3267", "extension": ".pdf", "flesch": "43", "author": "Blanco, S.; Uribe, P.; Moreno, D.; Ortiz, C.; Gutierrez, J.", "title": "Self-Assembled Polymer Layer with Silver Nanoparticles as an Alternative Coating for Biomedical Applications", "date": "2018", "keywords": "growth; nanoparticles; nps; silver; steel; surface", "summary": "Then, according to the results we selected the SAMs obtained with adipic acid and glycine to test their assembly with Ag nanoparticles. In this work, we evaluate a self- assembled polymer layer with silver nanoparticles as an alternative coating on mild carbon steel for the substitution of the more expensive stainless steel and the traditional disinfection procedures.", "mime": "application/pdf"}, {"id": "cet-2649", "words": "4046", "extension": ".pdf", "flesch": "53", "author": "Kalgudi, R.; Chrzastek, A.; Kyazze, G.; Iqbal, I.; Keshavarz, T.", "title": "Synergistic Effect of Tryptophan and Erythromycin on Pseudomonas Aeruginosa Biofilm Structure and Dispersal", "date": "2018", "keywords": "aeruginosa; biofilm; doi; treatment; tryptophan", "summary": "Following that, combination of two isoforms of one concentration (the most effective one) of tryptophan and antibiotic erythromycin against P. aeruginosa PAO1 biofilm will be performed. For the purpose of this study, dextrorotatory (D-) and laevorotatory (L-) isoforms of tryptophan have been chosen and three different concentrations (1 mM, 4 mM, 8 mM) selected to determine whether these concentrations have any effect on dispersion of P. aeruginosa PAO1 biofilm.", "mime": "application/pdf"}, {"id": "cet-2650", "words": "2996", "extension": ".pdf", "flesch": "44", "author": "Clavijo, D.; Casadiego-Torrado, C.; Perea-Covarrubias, A.; Galindo-Zamora, V.", "title": "Biofunctionalization of Titanium to Improve the Response in Patients with Osteoporosis Requiring Implants", "date": "2018", "keywords": "bone; coating; days; femur; implant; raloxifene; screws; tio2np; tio2np+r", "summary": "Two manually selected seeds where used for the distal and proximal femur areas (foreground) and a third one for the background area including the heads of the bolt (Figure 1). In order to assess changes in bone density as an improvement index of the trabecular microarchitecture, Ti6Al4V screws were biofunctionalized by electrospray (Electrostatic Spray Deposition) with TiO2 nanoparticles (TiO2np) or nanoparticles of TiO2 and raloxifene (TiO2np+R).", "mime": "application/pdf"}, {"id": "cet-2651", "words": "3199", "extension": ".pdf", "flesch": "45", "author": "Montero Fernandez, I.; Alves Chagas, E.; Melo Filho, A.A.; Saravia Maldonado, S.A.; Carvalho Dos Santos, R.; Cardoso Chagas, P.; Dantas Rodrigues Da Silva Duarte, E.", "title": "Evaluation of Total Phenolic Compounds and Antioxidant Activity in Amazon Fruit", "date": "2018", "keywords": "antioxidant; camu; compounds; fruits; iron; peel; phenolic; pulp; seeds", "summary": "On the other hand, Canuto et al. (2010), evaluated the antioxidant activity of fruit pulps, using trolox, and found antioxidant activity for the pulp of abiu (0.8 \u00b1 0.1) \u03bcmol.L-1 trolox, for the pulp of the arapa , 0 \u00b1 0.1) \u03bcmol. Comparing the results obtained with other works for Amazonian fruits developed by Rufino et al. (2010), where they evaluated different fruit pulps, they determined by the FRAP technique the antioxidant capacity of acerola pulp with a value of (148 \u00b1 16)", "mime": "application/pdf"}, {"id": "cet-2652", "words": "3000", "extension": ".pdf", "flesch": "40", "author": "Silva, M.D.G.; Almeida, D.; Soares Da Silva, R.D.C.; Meira, H.; Almeida, F.; Fernandes, M.; Silva, A.K.P.; Dos Santos V, A.; Sarubbo, L.", "title": "Chemically Modified Natural Substances Screening for Biofilms Inhibition and Biofouling Control", "date": "2018", "keywords": "acid; biofilms; fatty; glyceryl; growth; inhibition; oleic; sodium; substances", "summary": "Selected substances and their variants for the synthesis were chosen based on/supported by studies that demonstrated the antifouling potential of some types of fatty acids and the efficacy of monoglycerides in combating the formation of biofilms. It was observed that a mixture of palmitic, stearic, oleic and linoleic acids was able to inhibit AI-2 activity, disturbing the microbial quorum sensing, thus indicating that fatty acids inhibit biofilm formation and, in turn, inhibit the larval establishment (Soni et al 2008).", "mime": "application/pdf"}, {"id": "cet-2653", "words": "3551", "extension": ".pdf", "flesch": "52", "author": "Malagon-Romero, D.; Clavijo, D.; Lopez, C.", "title": "Production of Polycaprolactone Microcarriers using Electrospray for Fibroblast Cultures", "date": "2018", "keywords": "cells; concentration; engineering; et al; microcarriers; pcl; solution", "summary": "664 Table 2: Cell viability for murine fibroblasts cultured on PCL microcarriers in DMEM. On the other hand, PCL solution concentration affects the diameter, so higher concentrations mean larger diameters.", "mime": "application/pdf"}, {"id": "cet-2654", "words": "4020", "extension": ".pdf", "flesch": "43", "author": "Sed, G.; Cicci, A.; Bravi, M.", "title": "Growth of Microalgae in Spectrum-Neutral, Volume- Distributed Light Restriction as the Baseline of Wastewater Exploitation", "date": "2018", "keywords": "absorbance; culture; dilution; effects; growth; growth rate; light; media; microalgae; rate", "summary": "Similarly it is possible to individuate from the obtained experimental data, the correspondent value, for every dilution, of growth rate and call it experimental growth rate: \u00b5EXP. A common way to measure microbial growth is by specific growth rate, \u03bc, in d-1, describing the biomass growth related to the existing biomass.", "mime": "application/pdf"}, {"id": "cet-2655", "words": "3101", "extension": ".pdf", "flesch": "58", "author": "Lima, S.; Grisafi, F.; Scargiali, F.; Caputo, G.; Brucato, A.", "title": "Growing Microalgae in a \u201cQuasi-isoactinic\u201d Photobioreactor", "date": "2018", "keywords": "culture; dark; figure; growth; light; microalgae; order; reactor", "summary": "The system is driven by an Arduino platform that makes it possible to control light intensity as well as light-dark cycles. In addition, it is to bear in mind that all the photosynthetic cells are affected by light inhibition effects if light intensity is larger than that they can actually use in photosynthesis (Richmond and Hu, 2013).", "mime": "application/pdf"}, {"id": "cet-2656", "words": "3039", "extension": ".pdf", "flesch": "47", "author": "Mezzanotte, V.; Marazzi, F.; Sa Mesquita Da Silva Cristovao, M.B.; Bellucci, M.; Ficara, E.", "title": "Phycoremediation to Reduce the Pollution Load of Piggery Wastewater: Results of Semi-Continuous Lab Tests Using Chlorella and Scenedesmus Spp.", "date": "2018", "keywords": "biomass; l-1; microalgae; nitrogen; piggery; production; removal; tss; wastewater", "summary": "Krediet C.J., DeNofrio J.C., Caruso C., Burriesci M.S., Cella K., Pringle J.R., 2015, Rapid, Precise, and Accurate Counts of Symbiodinium Cells Using the Guava Flow Cytometer, and a Comparison to Other Methods, PlosONE, DOI:10.1371/journal.pone.0135725 Mahdy A., Mendez L., Ballesteros M. & Gonz\u00e1lez-Fern\u00e1ndez C., 2014, Autohydrolysis and alkaline pretreatment effect on Chlorella vulgaris and Scenedesmus sp. methane production, Energy, 78, 48-52. The specific role of the different mechanisms involved in nitrogen removal was calculated.", "mime": "application/pdf"}, {"id": "cet-2657", "words": "3317", "extension": ".pdf", "flesch": "41", "author": "Mazzelli, A.; Cicci, A.; Sed, G.; Bravi, M.", "title": "Development of a Semi-Theoretical Light Radiation and Photosynthetic Growth Model for the Optimal Exploitation of Wastewaters by Microalgae", "date": "2018", "keywords": "growth; light; medium; model; wastewaters", "summary": "The results showed above confirmed the hypothesis made for a synthetic medium with an inert dye ( \u2245 1), giving also positive response for using wastewaters in addition to growth medium. It should be noted that this conclusion cannot be drawn upon the raw measured specific growth 689 rates only, which exhibit a continuous decrease of specific growth rate when the wastewater volume fraction in the formulated media is increased.", "mime": "application/pdf"}, {"id": "cet-2658", "words": "3204", "extension": ".pdf", "flesch": "37", "author": "Mazzelli, A.; Cicci, A.; Franceschini, G.; Di Caprio, F.; Iaquaniello, G.; Altimari, P.; Pagnanelli, F.; Toro, L.", "title": "Investigation of Effects of Nutrients and External Parameters on Kinetic Growth of Outdoor Microalgal Cultivation", "date": "2018", "keywords": "concentration; data; factors; growth; light; plant; position; reactors; temperature", "summary": "Measures taken on different reactors were considered as replicates. Factor SS df MS F P-value Fcrit Position along the axis of each reactor 0.586 1 0.586 49.76 7.34*10-11 3.91 Reactors\u2019 position inside the plant 0.097 6 0.016 1.37 0.229 2.16 Time of measurements' uptake: Part of the day 5.55*108 2 2.77*108 2.29*103 1.40*10-119 3.05 Time of measurements' uptake: Different days 3.03*107 8 3.79*105 31.31 2.88*10-29 1.99 694 Figure 3: Example of normalized light data in function of time for different reactors and axis position during an experiment.", "mime": "application/pdf"}, {"id": "cet-2659", "words": "3262", "extension": ".pdf", "flesch": "47", "author": "Liu, Hongmei; Liu, Chengbin; Li, Rong", "title": "Study on the Importance of Multi-components of Slag-based Composite Cementitious Material by LSMI Feature Selection", "date": "2018", "keywords": "chloride; components; features; magnesia; magnesium; sbccm; selection; slag", "summary": "Therefore, it is meaningful to analyse the key components of SBCCM based on LSMI feature selection. A least-squares mutual information (LSMI) method was created for feature selection of SBCCM.", "mime": "application/pdf"}, {"id": "cet-2660", "words": "2944", "extension": ".pdf", "flesch": "51", "author": "Di, Yanqing; Cui, Xiaowei; Nan, Ning; Zhou, Chunsheng", "title": "Hydration Reaction of Cementitious Materials Prepared with Molybdenum Tailings", "date": "2018", "keywords": "gel; hydration; materials; molybdenum; molybdenum tailings; paste; tailings", "summary": "Obviously, when molybdenum tailings proportion increases from 10% to 30%, the compressive strength of the paste sample will decrease more or less; while when molybdenum tailings 8 proportion increases from 30% to 40%, the decrease of the compressive strength is much more obviously, which is mainly due to the fact that molybdenum tailings are low-active. 3d \u2014AFt \u2014C 3 S \u2014Ca(O H ) 2 \u2014SiO2 Figure 3: XRD patterns of the paste sample of molybdenum tailings cementitious materials It can be seen from Figure 3 that the major phase of the hydration products of molybdenum tailings cementitious materials are quartz, calcium hydroxide, ettringite, and tricalcium silicate.", "mime": "application/pdf"}, {"id": "cet-2661", "words": "3233", "extension": ".pdf", "flesch": "58", "author": "Yang, Yiyun", "title": "Frustration-Induced Relaxation in Polycrystalline Nd1- xSrxCoO3 (x=0.10, 0.15, 0.20)", "date": "2018", "keywords": "aging; cobaltite; glass; relaxation; spin; spin glass; system; temperature", "summary": "The exchange bias and magnetic relaxation of cobaltite were explored in great details, leading to the discovery of spin glass in cobaltite system. Thus, the magnetic relaxation is another prominent feature of spin glass system (Caiuffo et al., 1999; Yamaura et al., 1999; Saron et al., 2016; Li et al., 2016).", "mime": "application/pdf"}, {"id": "cet-2662", "words": "3395", "extension": ".pdf", "flesch": "55", "author": "Li, Xin; Miao, Hui; Zhu, Hongping", "title": "Deposition and Characterization of Diamond-like Carbon Films by Electron Cyclotron Resonance Microwave Plasma Enhanced Unbalanced Magnetron Sputtering", "date": "2018", "keywords": "bias; carbon; deposition; dlc; energy; film; raman; sp3; surface; target", "summary": "Phys. Rev., 5, 3482-3487, DOI: 10.1016/0925-9635(94)05204-2 Habibi, S.M. Mousavi K., 2017, Raman spectroscopy of thin DLC film deposited by plasma electrolysis process, Surface & Coatings Technology, 309, 945\u2013950, DOI: 10.1016/j.surfcoat.2016.10.056 Johnston G.P., Tiwari P., Rej D.J., 1994, Preparation of diamond like carbon films by high-intensity pulsed-ion- beam deposition, Journal of Applied Physics, 76, 5949-5945. Figure 7: Surface morphology of DLC films under different bias 4.4 Formation mechanism of DLC film For the mechanism of DLC film formation using PVD, Robertson J. (Robertson, 2002) proposed the subplantation model.", "mime": "application/pdf"}, {"id": "cet-2763", "words": "3382", "extension": ".htm", "flesch": "47", "author": "Wang, Ru; Tian, Hongfang", "title": "Chemical Features of Atmospheric Particulate Matter in Longmen Grottoes", "date": "2018", "keywords": "concentration; grottoes; longmen; matter; metal; particulate; pm2.5; sampling; site", "summary": "2- 8.61\u00b13.09 6.58\u00b12.21 8.49\u00b15.39 74.2\u00b118.9 5.34\u00b13.98 3.21\u00b11.19 3.69\u00b12.14 66.5\u00b116.8 Na+ 0.12\u00b10.07 0.12\u00b10.07 0.41\u00b10.71 1.29\u00b11.02 0.09\u00b10.10 0.05\u00b10.02 0.13\u00b10.08 2.07\u00b11.58 NH4 + 3.95\u00b10.09 2.19\u00b11.09 11.74\u00b14.31 16.45\u00b14.21 2.59\u00b11.39 1.01\u00b10.87 3.38\u00b11.08 15.98\u00b14.57 K+ 0.29\u00b10.10 0.20\u00b10.17 1.69\u00b10.47 1.59\u00b10.49 0.22\u00b10.04 0.11\u00b10.09 0.48\u00b10.18 1.48\u00b10.42 Mg2+ 0.08\u00b10.04 0.05\u00b10.06 0.05\u00b10.04 4.71\u00b11.06 0.08\u00b10.06 0.04\u00b10.01 0.02\u00b10.01 4.47\u00b11.38 Ca2+ 1.59\u00b10.79 0.46\u00b10.32 1.12\u00b10.64 5.42\u00b11.58 1.28\u00b10.62 0.42\u00b10.12 0.69\u00b10.19 5.07\u00b11.81 627 he pH of atmospheric fine particulate matter has a significant impact on the pH of precipitation. Copyright \u00a9 2018, AIDIC Servizi S.r.l. ISBN 978-88-95608-63-1; ISSN 2283-9216 Chemical Features of Atmospheric Particulate Matter in Longmen Grottoes Ru Wang, Hongfang Tian* Management Department, Shijiazhuang University of Applied Technology, Shijiazhuang 050081, China 390324244@qq.com In recent years, the pollution of fine particulate matter (PM2.5) has been increasing in China.", "mime": "application/pdf"}, {"id": "cet-2764", "words": "2916", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-2764", "date": null, "keywords": "area; chemical; distribution; jiuzhaigou; metal; metal pollution; pollution; soil; spot", "summary": "This paper takes the spatial distribution characteristics of heavy metal chemical pollution in Jiuzhaigou scenic spot as the research object, adopts the methods of literature analysis, field investigation and mathematical statistics, etc., based on the brief introduction of the general situation of Jiuzhaigou scenic spot and the relationship between earthquake and heavy metal pollution, and adopts field survey. (a) Data distribution of powdered soil in Jiuzhaigou scenic area (b) The distribution of clay soil data in Jiuzhaigou scenic spot (c) Sandstone data distribution in Jiuzhaigou scenic area Figure 2: Data distribution of soil clay, grain and sand in Jiuzhaigou scenic area The pH values of soil have a great influence on heavy metal content (Ogunkunle and Fatoba, 2014).", "mime": "application/pdf"}, {"id": "cet-2765", "words": "3430", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-2765", "date": null, "keywords": "carbon; china; decoupling; effect; emission; energy; industry; transportation", "summary": "On this basis, Andreoni conducted a decoupling analysis of the relationship between carbon emission and economic growth in Italy\u2019s agriculture, industry, and transportation industry from the perspective of carbon emission intensity, energy intensity, energy structure, and economic growth. In order to study the relationship between carbon emission and economic growth in China\u2019s transportation industry and the driving factors of carbon emission, the Logarithmic Mean Divisia Index (LMDI) decomposition model of carbon emission elastic decoupling and carbon emission driving factors is established.", "mime": "application/pdf"}, {"id": "cet-2766", "words": "3368", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-2766", "date": null, "keywords": "area; changbai; changbai mountain; highway; load; mountain; plank; pollution; rainfall; runoff", "summary": "Based on data from artificial rainfall experiment, the annual surface runoff pollution load model proposed by the American scholar Schueler underlies the highway and plank road pollution load model as built hereof, and appropriate correction is also done with appropriate indicators. DOI: 10.3303/CET1866108 Please cite this article as: Xin J., 2018, Distribution of heavy metal pollutions in changbai mountain scenic area based on pollution load model, Chemical Engineering Transactions, 66, 643-648 DOI:10.3303/CET1866108 643 2.", "mime": "application/pdf"}, {"id": "cet-2767", "words": "4118", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-2767", "date": null, "keywords": "artemisia; concentration; copper; copper concentration; elements; metal; plants; soil", "summary": "Chen et al.,2000), heavy metal passivation or fixation technology (Pulford and Watson, 2003; Dushenkov et al., 1995; Vangronsveld et al.,2009), plant volatilization technology, plant rhizofiltration technology (Lin and Terry, 2003), plant-assisted remediation techniques (Ma et al., 2009) and remediation of soil heavy metal pollution by hyperaccumlating plant. The study on phytoremediation of heavy metal polluted soil surrounding coal mines shows that the contents of the same heavy metal are different in five different plants, and the aerial and underground parts of the same plant absorb different amounts of the metal.", "mime": "application/pdf"}, {"id": "cet-2768", "words": "3392", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-2768", "date": null, "keywords": "aos; crude; foam; gas; height; oil; stability; surfactant", "summary": "Figure 3: Foam (a) without Betaines; (b) with Betaines Figure 4: (a) Foam collapse completely at about 5 minutes for PEGB; and foam height at 60 minutes for (b) PEGDME and (c) LS Figure 5: Foam height versus time with different polymeric surfactant 3.4 Effects of crude oil on foam stability This section aims to examine the destruction mechanism on AOS-stabilized foam when oil is present. The effects of different types of crude oil on foam stability were also analyzed.", "mime": "application/pdf"}, {"id": "cet-2769", "words": "2440", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-2769", "date": null, "keywords": "cement; coal; combustion; compound; concrete; gangue; microstructure", "summary": "The relationship between compressive strength and axial compressive strength of coal gangue cement concrete is established by testing the compressive property of coal gangue cement compound (CGCC). Taking cement compound as the object of study, this study explores the effect of cement compound on the microstructure of cement concrete by adding different contents of coal gangue fine aggregates, as well as reveals the action mechanism of active coal gangue on cement concrete.", "mime": "application/pdf"}, {"id": "cet-2770", "words": "3550", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-2770", "date": null, "keywords": "coal; coal seam; drainage; drill; face; gas; hole; spacing", "summary": "4.1.1 Basic assumptions of coal seam gas movement The movement of gas in coal seams is very complicated. Figure 3: Schematic diagram of the model 4.2 Results analysis Through simulated calculation of the above model, the following results are obtained: (1) The gas pressure distribution is shown in Figures 4 and 5 when the hole spacing is 1.6m. Figure 4: Gas pressure in surrounding coal seams after 30-days drainage Figure 5: Gas pressure in surrounding coal seams after 150-days drainage (2)", "mime": "application/pdf"}, {"id": "cet-2771", "words": "2543", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-2771", "date": null, "keywords": "curve; design; figure; freeform; modelling; structure; surface", "summary": "Generation and analysis of complex form 3.1 Procedure of parametric design for complex surface structure The first step of parametric design is to determine the core design logic. Then, the parametric design and software for complex surface structure were determined.", "mime": "application/pdf"}, {"id": "cet-2772", "words": "2593", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-2772", "date": null, "keywords": "control; controller; disturbance; motor; pid; rejection; temperature; time", "summary": "Compile the control module of motor temperature active disturbance rejection controller with the S function; 2. DOI: 10.3303/CET1866114 Please cite this article as: Liao J., 2018, Simulation of active disturbance rejection control for cold-hot water mixer system, Chemical Engineering Transactions, 66, 679-684 DOI:10.3303/CET1866114 679 3.", "mime": "application/pdf"}, {"id": "cet-2773", "words": "2919", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-2773", "date": null, "keywords": "control; cutting; laser; law; material; mode", "summary": "The laser beam cutting technology is divided into four types: laser vaporization cutting, laser melting cutting, laser oxygen cutting, and laser scribing and fracture control. Owing to much heat out of oxidation reaction in the cutting process, the energy required for laser oxygen cutting is only 1/2 of that in the laser melting cutting, but the cutting speed is beyond over the laser vaporization cutting and melting cutting.", "mime": "application/pdf"}, {"id": "cet-2774", "words": "2853", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-2774", "date": null, "keywords": "alloy; analysis; element; finite; friction; heat; magnesium; process; stress; temperature; welding", "summary": "Its products are mainly concentrated in the magnesium steering wheel, engine bracket and the instrument panel and other structural parts, also rarely involve transmission parts, engine and other key components of high temperature. The rapid development of magnesium alloy is widely utilized at present, magnesium alloy, magnesium manganese alloy, mainly used in aviation, aerospace, automotive and 3C industries.", "mime": "application/pdf"}, {"id": "cet-2775", "words": "2585", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-2775", "date": null, "keywords": "alloy; aluminium; chemical; dispersant; polishing; slurry; surface", "summary": "DOI: 10.3303/CET1866117 Please cite this article as: Zhao Y., Yu G., Li Y., Wang G., 2018, Preparation and performance study of chemical mechanical polishing slurry for new-type aluminium alloy, Chemical Engineering Transactions, 66, 697-702 DOI:10.3303/CET1866117 697 2. Performance evaluation of chemical mechanical polishing slurry 4.1 Effect of slurry on polishing removal rate The effect of pH and abrasive content on the polishing rate was determined by polishing experiments on new type aluminum alloys with different pH and abrasive contents.", "mime": "application/pdf"}, {"id": "cet-2939", "words": "2665", "extension": ".pdf", "flesch": "46", "author": "Valencia Ochoa, G.; Cardenas, Y.; Albis Arrieta, A.R.", "title": "Mapping the Research on Gasification to Syngas Production Using Scientometry Analysis from 2007 to 2017", "date": "2018", "keywords": "countries; doi; energy; publications; research; syngas", "summary": "The bibliometric analysis allowed a systematic treatment to quantitatively analyze scientific publications to detect particular research trends. Introduction The continuous development of computational tools has dominated the growth in the number of articles and research carried out in recent years, due to this tools facilitate the process of publication and compiling research results, in addition to their compilation through databases (Robinson-Garcia et al., 2017).", "mime": "application/pdf"}, {"id": "cet-2940", "words": "3375", "extension": ".pdf", "flesch": "31", "author": "Wei, Ding; Dezhi, Zhao; Yongchuan, Dai; Zhanxu, Yang; Linhai, Duan", "title": "Hydrofining and Pour Point Depressing Tandem Technology for Catalyzing Diesel", "date": "2018", "keywords": "catalyst; diesel; hydrofining; oil; point; pour; process; technology; temperature", "summary": "At the same time, heterogeneous pour point depressing scheme and hydrofining can be flexibly converted to produce clean diesel with low demand for low pour point diesel and to improve the economic and social benefits of the enterprises. 2. Literature review With the ever-increasing environmental protection requirements, the quality of diesel oil has become increasingly stringent.", "mime": "application/pdf"}, {"id": "cet-2941", "words": "3058", "extension": ".pdf", "flesch": "45", "author": "Duarte, J.; Valencia Ochoa, G.; Cardenas, Y.", "title": "Characterization of Auto-Ignition Phenomena in Spark Ignition Internal Combustion Engine using Gaseous Fuels Obtained from Biomass", "date": "2018", "keywords": "auto; combustion; compression; engine; fuel; gas; ignition; point; temperature", "summary": "2. Methodology In the present research, the following methodological steps were developed, to achieve significant results on the study of auto-ignition applied to spark ignition engines operated with gaseous fuels. de Faria, M. M. N., Bueno, J. P. V. M., Ayad, S. M. M. E., & Belchior, C. R. P., 2017, Thermodynamic simulation model for predicting the performance of spark ignition engines using biogas as fuel.", "mime": "application/pdf"}, {"id": "cet-2942", "words": "3930", "extension": ".pdf", "flesch": "57", "author": "Skreiberg, O.; Seljeskog, M.", "title": "Performance History and Further Improvement Potential for Wood Stoves", "date": "2018", "keywords": "emission; levels; load; particle; stove; wood", "summary": "Improvement potential for wood stoves As can be seen from the data presented in this work, particle emission levels below 2 g/kg dry fuel is possible in today\u2019s best wood stoves approved for sale in Norway. These wood stoves also have the potential to perform energetically much better than old types of wood stoves, due to better combustion air control, reducing the overall excess air ratio.", "mime": "application/pdf"}, {"id": "cet-2943", "words": "2901", "extension": ".pdf", "flesch": "34", "author": "Xiaoqun, Mao", "title": "Design of New Electrochemical Sensors and Detection Application of Chemical Feedstock Residues", "date": "2018", "keywords": "chemical; current; detection; electrode; enzyme; feedstock; figure; residues; sensor; system", "summary": "205 DOI: 10.3303/CET1865035 Please cite this article as: Xiaoqun Mao , 2018, Design of new electrochemical sensors and detection application of chemical feedstock residues, Chemical Engineering Transactions, 65, 205-210 DOI: 10.3303/CET1865035 Currently, electrochemical sensors are widely used in chemical, pharmaceutical and other fields due to their advantages of fast detection speed, high precision, and low cost (Banerjee et al., 2017; Choudhary et al., 2015; Dong, 2017; Guan et al., 2018). Taking electrochemical sensor as research basis, a new three- electrode electrochemical sensor is designed based on the decomposition principle of chemical enzyme media.", "mime": "application/pdf"}, {"id": "cet-2944", "words": "4063", "extension": ".pdf", "flesch": "50", "author": "Pinto, F.; Paradela, F.; Carvalheiro, F.; Duarte, L.; Costa, P.; Andre, R.", "title": "Co-Pyrolysis of Pre-Treated Biomass and Wastes to Produce Added Value Liquid Compounds", "date": "2018", "keywords": "biomass; compounds; eucalyptus; liquid; pre; products; pyrolysis; wastes", "summary": "However, the use of pre-treated biomass led to higher liquid yields and to lower solids than the values obtained with untreated eucalyptus. Figure 2 also shows that pre-treated biomass led to lower gas yields than untreated eucalyptus.", "mime": "application/pdf"}, {"id": "cet-2945", "words": "3497", "extension": ".pdf", "flesch": "48", "author": "Huazhou, Liu; Yanhong, Shi", "title": "Integrated Design for Biomass Compression Molding Machine Based on CAD Technology", "date": "2018", "keywords": "biomass; china; die; energy; fatigue; fuel; granulator; mode; molding; press; roller", "summary": "Biomass energy is the fourth largest energy source after oil, coal and natural gas. In 1992, after the World Conference on Environment and Development, European and American countries began to vigorously develop biomass energy.", "mime": "application/pdf"}, {"id": "cet-2946", "words": "4227", "extension": ".pdf", "flesch": "58", "author": "Skreiberg, O.; Georges, L.", "title": "Transient Heat Production and Release Profiles for Wood Stoves", "date": "2018", "keywords": "case; combustion; heat; heat production; heat release; stove", "summary": "The heat release standard deviation in percent of mean heat release is slightly improved by a more stable drying process and a closer to constant dry fuel composition. The ratio between the peak heat release and the peak heat production 0.68 0.69 0.67 0.66 0.30 0.45 0.43 The ratio between the heat release duration and the heat production duration 2.15 2.18 2.19 2.15 5.12 2.24 3.56 The heat release standard deviation in percent of mean heat release 87.99 85.54 83.80 83.95 76.73 57.47 84.38 Base case Case 2 Case 3 Case 4 Case 5 Case 6 Case 7 Inner wall surface max temperature (\u00b0C) 239.99 230.95 228.38 198.10 195.26 263.31 221.71 Layer 1 max temperature (\u00b0C) 210.01 202.82 200.74 124.47 164.52 232.98 192.18 Layer 2 max temperature (\u00b0C) 181.44 175.86 174.27 197.94 139.35 177.24 164.90 Layer 3 max temperature (\u00b0C)", "mime": "application/pdf"}, {"id": "cet-2947", "words": "3199", "extension": ".pdf", "flesch": "52", "author": "Sangian, H.F.; Pangau, J.R.; Tamuntuan, G.H.; Zulnazri, Z.", "title": "The Structural Analysis of the Lignocellulose, Champaca Timber (Elmerrilliaovalis) Modified by the Microwave", "date": "2018", "keywords": "acetylcellulose; biomass; cellulose; lignin; microwave; pretreatment; solid; substrate; surface", "summary": "The present work is to modify the biomass structure before hydrolyzing using microwave pretreatment. Even though it did not use liquid agents dissolving lignin, microwave pretreatment was 232 effective to modify the structure of lignocellulosic crystal.", "mime": "application/pdf"}, {"id": "cet-2948", "words": "3093", "extension": ".pdf", "flesch": "45", "author": "Lambis, H.; Garzon, A.J.; Valencia Ochoa, G.", "title": "Comparative Analysis of the World\u2019s Scientific Production in the Area of Sustainable Development and Environmental Impact", "date": "2018", "keywords": "area; countries; development; group; impact; production; research", "summary": "Two other indicators were also used: per capita production and production relative to gross domestic product (GDP), with population data for European countries and other continents, allowing important conclusions to be drawn regarding the issue of sustainable development and environmental impact. Barranquilla, Colombia hlambs@tecnocomfenalco.edu.co This study examines world scientific production on sustainable development on the basis of bibliometric indicators (scientific production, percentage variation of production, average cites per document, normalized impact, etc.) for the period 2007-2017.", "mime": "application/pdf"}, {"id": "cet-2949", "words": "2760", "extension": ".pdf", "flesch": "51", "author": "Bracciale, M.P.; De Caprariis, B.; Bassano, C.; De Filippis, P.; Deiana, P.; Hernandez, A.D.; Scarsella, M.", "title": "Influence of the Catalyst Support on the Steam Reforming Performance of Toluene as Tar Model Compound", "date": "2018", "keywords": "biomass; catalyst; mayenite; reforming; steam; tar", "summary": "The obtained results indicate that Ni /mayenite catalyst needs higher temperature to activate and leads to lower value of toluene conversion with respect to Ni / alumina. The tests were performed in a fixed bed reactor with steam to carbon ratio ranging from 5, typical for steam reforming of naphtha, and 1 in order to simulate the typical conditions of a pyrolysis reactor where usually water and tar have a 1:1 ratio.", "mime": "application/pdf"}, {"id": "cet-2950", "words": "3565", "extension": ".pdf", "flesch": "39", "author": "Hernandez, M.; Gonzalez, A.J.; Suarez, F.; Ochoa, C.; Candela, A.M.; Cabeza, I.", "title": "Assessment of the Biohydrogen Production Potential of Different Organic Residues In Colombia: Cocoa Waste, Pig Manure and Coffee Mucilage", "date": "2018", "keywords": "biomass; cocoa; coffee; energy; fermentation; hydrogen; manure; mucilage; pig; process; production; waste", "summary": "Therefore, hydrogen production process showed some limitations, which could be related to the low S/X ratio (Florio, 2017). In order to assure hydrogen production, additional tests were conducted collecting gas in Tedlar\u00ae bags and using BIOGAS 5000\u00ae Landtec to verify gas composition.", "mime": "application/pdf"}, {"id": "cet-2951", "words": "2738", "extension": ".pdf", "flesch": "47", "author": "Zezhen, Li; Yun, Xiong; Bo, Chen", "title": "Performance of Commercial Diesel Detergent", "date": "2018", "keywords": "cleaning; deposits; detergent; diesel; engine; fuel; power; soot; test", "summary": "Diesel detergents are classified into ash-based and ashless types according to whether they contain metals (Tian and Xiong, 2010). The test uses commercial No.0 vehicle diesel (reported as 0#) with physicochemical indexes in accordance with GB 19147-2016. 2.2 Test program Detergency evaluation: 12 types of diesel detergents available in domestic and foreign markets are chosen and added to 0# base diesel, reported as 1# ~ 12#, at a ratio of 300\u03bcg\u00b7g-1.", "mime": "application/pdf"}, {"id": "cet-2952", "words": "2590", "extension": ".pdf", "flesch": "53", "author": "Arun A, Magadum; S.N, Sridhara", "title": "Performance and Emission of a VCR Engine Using Mahua Oil as Bio-diesel", "date": "2018", "keywords": "blends; compression; diesel; engine; fuel; oil; ratio", "summary": "Sureshkumar K., Velraj R., Ganesan R., 2008, Performance characteristics and exhaust emissions of a spark ignition engine powered by Pongamiapinnata methyl ester (PPME) and its mixtures with diesel fuel, Renew Energy, 33, 2294-302. In certainty, the improvement of diesel engine and bio diesel has concurrent history of mechanical progressions and financial battle.", "mime": "application/pdf"}, {"id": "cet-2953", "words": "2903", "extension": ".pdf", "flesch": "51", "author": "Barrozo, F.; Valencia Ochoa, G.; Cardenas, Y.", "title": "Computational Simulation of the Gas Emission in a Biomass on Grid Energy System Using HOMER Pro Software", "date": "2018", "keywords": "biogas; biomass; energy; greenhouse; grid; production; supply; system", "summary": "Several 265 DOI: 10.3303/CET1865045 Please cite this article as: Barrozo F., Valencia Ochoa G., Cardenas Y., 2018, Computational simulation of the gas emission in a biomass on grid energy system using homer pro software, Chemical Engineering Transactions, 65, 265-270 DOI: 10.3303/CET1865045 studies are available trying to quantify global biomass potential (Hoogwijk M. et al. 2005), present a viable alternative option to replace fossil fuels. Conclusions In this article, we presented an environmental feasibility study for biogas energy grid operating with biogas obtained from biomass from livestock sector manure and urban organic solid waste, to supply the energy of a group of office buildings.", "mime": "application/pdf"}, {"id": "cet-2954", "words": "2962", "extension": ".pdf", "flesch": "54", "author": "Ravi V, Rambha; Ting, X. Ren", "title": "Study of the Susceptibility of Coal for Spontaneous Combustion using Adiabatic Oxidation Method", "date": "2018", "keywords": "coal; heating; oxidation; rise; sample; temperature", "summary": "Results of 271 DOI: 10.3303/CET1865046 Please cite this article as: Ravi V. Rambha , Ting X. Ren , 2018, Study of the susceptibility of coal for spontaneous combustion using adiabatic oxidation method, Chemical Engineering Transactions, 65, 271-276 DOI: 10.3303/CET1865046 moisture content, heat of wetting effect, size fraction, nitrogen suppression and ageing of coal sample tests are presented and discussed. Coal samples were dried inside the reaction vessel under nitrogen flow at 40 \u00b0C for approximately 18 hrs to ensure sample was moisture free.", "mime": "application/pdf"}, {"id": "cet-2955", "words": "3862", "extension": ".pdf", "flesch": "50", "author": "Dell Orco, S.; Rizzo, A.M.; Buffi, M.; Chiaramonti, D.", "title": "Design of a Circulating Fluidized Bed Combustor for Lignin- Rich Residue Derived From Second-Generation Bioethanol Production Plant", "date": "2018", "keywords": "air; bed; cfb; combustion; design; lignin; mass; model; riser; solid", "summary": "Development of fluidized bed combustion-An overview of trends, performance and cost. Hence, the optimization of combustion systems, in particular the use of fluidized bed combustion technologies, can make the energy recovery much more efficient, mitigating technical problems related to the physico-chemical characteristics of lignin (Solimene et al., 2016b).", "mime": "application/pdf"}, {"id": "cet-2956", "words": "3880", "extension": ".pdf", "flesch": "51", "author": "Birgen, C.; Markussen, S.; Wentzel, A.; Preisig, H.A.", "title": "The Effect of Feeding Strategy on Butanol Production by Clostridium beijerinckii NCIMB 8052 using Glucose and Xylose", "date": "2018", "keywords": "butanol; cell; fermenter; glucose; sugar; utilization; xylose", "summary": "Sugar utilization can be a good indicator of the fermentation performance as well. Sugar utilization, S (%) is calculated for both glucose, SG and xylose, SX as well for the total sugar by using Eq(5).", "mime": "application/pdf"}, {"id": "cet-2957", "words": "3307", "extension": ".pdf", "flesch": "50", "author": "Birgen, C.; Markussen, S.; Wentzel, A.; Preisig, H.A.; Wittgens, B.", "title": "Modeling the Growth of Clostridium beijerinckii NCIMB 8052 on Lignocellulosic Sugars", "date": "2018", "keywords": "glucose; growth; growth rate; ksx; model; rate; substrate; sugars; xylose", "summary": "We fitted growth models with different types of interactions to the growth rate data obtained with varying sugar concentrations. Table 2: Fit results for binary substrate growth models.", "mime": "application/pdf"}, {"id": "cet-2958", "words": "3711", "extension": ".pdf", "flesch": "41", "author": "Juan, Shang; Ya, Wen", "title": "Treatment of Micro-Polluted Natural Water Body by Aerobic Biofilm Process", "date": "2018", "keywords": "biofilm; concentration; filler; phosphorus; process; reactor; removal; sludge; treatment; wastewater; water", "summary": "More comprehensively, this paper proposes a proper process for culturing aerobic biofilm reactors since it can effectively clean up phosphorus-contaminated water bodies. However, due to multiple elements that contaminate the modern water bodies, the sewage treatment process involving aerobic biofilm reactor still has a big gap to be filled in the future.", "mime": "application/pdf"}, {"id": "cet-2959", "words": "2540", "extension": ".pdf", "flesch": "46", "author": "Valencia Ochoa, G.; Obregon Quinones, L.; Cardenas, Y.", "title": "Comparison Analysis of an Energy Generation System Using Diesel, Natural Gas and Biogas as a Primal Fuel Resource", "date": "2018", "keywords": "biogas; cost; diesel; energy; fuel; generation; production; system", "summary": "Conventional energy generation system 2. The implemented model with the assistance of HOMER pro aimed simulates different operational scenarios when using natural gas, biogas, and diesel as energy resource on the systems.", "mime": "application/pdf"}, {"id": "cet-2960", "words": "3364", "extension": ".pdf", "flesch": "48", "author": "Acosta Fernandez, R.A.; Viviescas, P.; Sandoval, M.; Nabarlatz, D.", "title": "Autohydrolysis of Sugarcane Bagasse and Empty Fruit Bunch from Oil Palm: Kinetics Model and Analysis of Xylo- Oligosaccharides Yield", "date": "2018", "keywords": "autohydrolysis; efbop; hemicellulose; model; reaction; scb; wt.%", "summary": "In this work, Xylo- oligosaccharides production was studied by autohydrolysis reaction in micro-reactors (50 mL). 2.3 Analytical Methods A sample of 2 mL of the liquid phase obtained after autohydrolysis reaction was filtered through a 0.22-\u00b5m syringe filter and analysed by HPLC to measure the amounts of monosaccharides and furfural.", "mime": "application/pdf"}, {"id": "cet-2961", "words": "2560", "extension": ".pdf", "flesch": "45", "author": "Valencia Ochoa, G.; Obregon Quinones, L.; Cardenas, Y.", "title": "Multi-Objective Analysis of a CHP System Using Natural Gas and Biogas on the Prime Mover", "date": "2018", "keywords": "biogas; chp; cost; energy; gas; load; system; valencia", "summary": "Biogas can be used in generation systems in places where the availability of natural gas may be compromised, while natural gas is used in conventional electricity distribution services. An analysis of a single system working with biogas will be compared with the CHP conventional system, with the main objective of identifying new alternatives of electric generation systems with less greenhouse gas emission, instead of the traditional alternatives of electric generation systems.", "mime": "application/pdf"}, {"id": "cet-2962", "words": "3579", "extension": ".pdf", "flesch": "42", "author": "Yonglun, Tang", "title": "Theoretical Study on Gaseous Hydrogenation Reaction of Crotonaldehyde", "date": "2018", "keywords": "b3lyp; bond; crotonaldehyde; hydrogenation; mol; reaction; results", "summary": "Secondly, the activation energy difference between C=C and C=O double bond hydrogenation of crotonaldehyde is 0.05 kJ/mol, but the difference between C=C hydrogenation of propylene and C=O hydrogenation of formaldehyde is 53.84 kJ/mol. Finally, through comparing the mechanisms of hydrogenation reactions of the isolated C=C (in propene) and C=O (in formaldehyde), the conjugate effect is revealed in which the difference in kinetics between C=C and C=O hydrogenation of crotonaldehyde is greatly decreased.", "mime": "application/pdf"}, {"id": "cet-2963", "words": "2642", "extension": ".pdf", "flesch": "49", "author": "Li, Y.; Lv, H.", "title": "Numerical Simulation of Mass Transfer of Slug Flow in Microchannel", "date": "2018", "keywords": "coefficient; film; flow; gas; liquid; mass; slug; transfer", "summary": "When residence time was defined as the length of gas bubble divided by gas liquid relative velocity, liquid side mass transfer coefficient was to penetration theory (Haghnegahdar et al., 2016). It is difficult to measure liquid side mass transfer coefficient in the narrow microchannel.", "mime": "application/pdf"}, {"id": "cet-2964", "words": "3198", "extension": ".pdf", "flesch": "48", "author": "Santos, F.; Freitas, K.; Costa Neto, J.; Fontes-Sant Ana, G.; Rocha-Leao, M.H.; Amaral, P.", "title": "Tiger Nut (Cyperus esculentus) Milk Byproduct and Corn Steep Liquor for Biosurfactant production by Yarrowia lipolytica", "date": "2018", "keywords": "biosurfactant; corn; liquor; medium; nut; production; tiger; tnf", "summary": "After 72 h of cultivation, these cells were used in sufficient amount to inoculate 1 mg of cells (dry weight) per ml of biosurfactant production media. Milk Byproduct and Corn Steep Liquor for Biosurfactant production by Yarrowia lipolytica Fabiane F. Santosa, Karine M.L. Freitasa, Jonas J.G. da Costa Netoa,b, Gizele Fontes-Sant\u2019Anac, Maria Helena M. Rocha-Le\u00e3oa, Priscilla F. F. Amarala,* aBiochemical Engineering Department, Universidade Federal do Rio de Janeiro, Rio de Janeiro, Av.", "mime": "application/pdf"}, {"id": "cet-2965", "words": "2915", "extension": ".pdf", "flesch": "65", "author": "Zhang, J.; Ren, T.X.; Wang, Y.", "title": "Optimization of Cooling Water System with Precooling Air Cooler", "date": "2018", "keywords": "air; cooler; cooling; cost; system; temperature; tower; water", "summary": "This paper gives an optimization model for formulating cooling water system with air coolers. Souza et al. (2017) studied the hydraulic performance of cooling water system.", "mime": "application/pdf"}, {"id": "cet-2966", "words": "3560", "extension": ".pdf", "flesch": "50", "author": "Tengku Mohd, T.A.; Mohd Taib, N.; Adzmi, A.F.; Nik Ab Lah, N.K.I.; Sauki, A.; Jaafar, M.Z.", "title": "Evaluation of Polymer Properties for Potential Selection in Enhanced Oil Recovery", "date": "2018", "keywords": "concentration; divalent; effect; hpam; oil; polymer; shear; viscosity", "summary": "(a) (b) Figure 5: Effect of polymer viscosity on (a) CaCl2 concentration; (b) MgCl2 concentration Both figures demonstrate all tested polymers becoming less viscous in the presence of divalent ion and increase in divalent ion concentration leads to a greater reduction in viscosity of the polymers except for PP and AG, which exhibit a minimum change in viscosity reduction. In the salinity and divalent test, Ca2+ ion causes a greater reduction of polymer viscosity than Mg2+ followed by Na+.", "mime": "application/pdf"}, {"id": "cet-2967", "words": "3230", "extension": ".pdf", "flesch": "43", "author": "Rehman, A.; Seay, J.; Badurdeen, F.", "title": "Application of Bayesian Belief Network for the Analysis of Accident Data in the Bioenergy Manufacturing Sector", "date": "2018", "keywords": "analysis; bayesian; data; failure; model; probability; risk", "summary": "As amply reported, the in-depth technical analysis of case histories can improve our understanding of the hazards related to novel and consolidated processes or activities, forcing operators to take appropriate risk preventive and mitigating measures (Vairo et al., 2017).Taking into account that the concept of risk analysis is intimately linked with the idea of uncertainty, statistical analysis appears to be an instrument of primary relevance for the optimal choice of the strategy. This research explores the outcome of coupling Bayesian theory within risk analysis in practice.", "mime": "application/pdf"}, {"id": "cet-2968", "words": "3131", "extension": ".pdf", "flesch": "52", "author": "Bartocci, P.; Barbanera, M.; Skreiberg, O.; Wang, L.; Bidini, G.; Fantozzi, F.", "title": "Biocarbon Pellet Production: Optimization of Pelletizing Process", "date": "2018", "keywords": "biochar; content; moisture; pellet; pelletization; pelletizing; sawdust", "summary": "Figure 4: Correlation between pellet moisture and durability 359 4. Figure 3: Obtained pellet from test 3 (up-left), test 6 (up-right), test 11 (down-left) and test 14 (down-right) 358 This is a commonly used procedure in literature, with small pelletizing machines.", "mime": "application/pdf"}, {"id": "cet-2969", "words": "4032", "extension": ".pdf", "flesch": "51", "author": "Sommersacher, P.; Kienzl, N.; Evic, N.; Hochenauer, C.", "title": "The Influence of Torrefaction on the Combustion Behavior of Selected Agricultural and Waste-Derived Solid Biomass Fuels", "date": "2018", "keywords": "aerosol; ash; biomass; combustion; emissions; fuels; scl", "summary": "This means that higher aerosol emissions have to be expected for torrefied fuels. The test results also indicate higher bed temperatures for torrefied fuels during char burnout.", "mime": "application/pdf"}, {"id": "cet-2970", "words": "4009", "extension": ".pdf", "flesch": "53", "author": "Tsodikov, M.; Ellert O, G.; Arapova, O.; Nikolaev, S.A.; Chistyakov, A.; Maksimov, Y.V.", "title": "Benefit of Fe-containing Catalytic Systems for Dry Reforming of Lignin to Syngas under Microwave Radiation", "date": "2018", "keywords": "carbon; heating; iron; lignin; microwave; mwr; nanoparticles; particles; reforming; samples; surface; wt.%", "summary": "It should be mentioned that Ni \u2013containing nanoparticles deposed on lignin surface from organosol (Tsodikov, 2017) and Fe \u2013containing particles demonstrate similar magnetic behavior. According to another procedure, iron particles were deposited from a colloid solution of metal particles in toluene prepared by metal vapor synthesis.", "mime": "application/pdf"}, {"id": "cet-2971", "words": "3665", "extension": ".pdf", "flesch": "49", "author": "Hancsok, J.; Visnyei, O.; Sagi, D.; Hollo, A.", "title": "Bio-Paraffin Mixture Production from Waste Fatty Acid Mixture", "date": "2018", "keywords": "acid; fatty; feedstock; h-1; lhsv; products; temperature", "summary": "We concluded that the publications investigating the catalytical hydrodeoxygenation of fatty acids, used mostly only model compounds (lauric acid, oleic acid, stearic acid, etc.) Figure 1 shows the reactions and products of fatty acid hydrogenated by the example of oleic acid.", "mime": "application/pdf"}, {"id": "cet-2972", "words": "3053", "extension": ".pdf", "flesch": "52", "author": "Lucian, M.; Piro, G.; Fiori, L.", "title": "A Novel Reaction Kinetics Model for Estimating the Carbon Content into Hydrothermal Carbonization Products", "date": "2018", "keywords": "carbon; htc; kinetics; model; reaction", "summary": "Figure 1: The lumped model used to describe HTC reaction paths In details, the first reaction step (Reaction 1, Biomass\uf0e0Liquid) represents the hydrolysis and dissolution processes through which the biomass components are partially degraded into oligomers and monomers deriving from hemicellulose and cellulose (Funke et al. 2010). The kinetics model, developed in MATLABTM, was used in a best fitting routine with HTC experimental data obtained for a representative ligno-cellulosic biomass (grape marc) and it is easily applicable to any kinds of feedstock.", "mime": "application/pdf"}, {"id": "cet-2973", "words": "3557", "extension": ".pdf", "flesch": "49", "author": "Casallas, I.D.; Carvajal, E.; Mahecha, E.; Castrillon, C.; Gomez, H.; Lopez, C.; Malagon-Romero, D.", "title": "Pre-treatment of Waste Cooking Oils for Biodiesel Production", "date": "2018", "keywords": "biodiesel; cooking; oil; production; waste; wco", "summary": "ISBN 978-88-95608- 62-4; ISSN 2283-9216 Pre-treatment of Waste Cooking Oils for Biodiesel Production Iv\u00e1n Dario Casallasa, Elver Carvajala, Erika Mahechaa, Camilo Castrill\u00f3na, Hern\u00e1n G\u00f3meza, Camilo L\u00f3pezb, Dionisio Malag\u00f3n-Romeroa* a Universidad Santo Tom\u00e1s, GEAMEC Research Group, Bogot\u00e1, Colombia b Universidad ECCI, Bogot\u00e1, Colombia dionisiomalagon@usantotomas.edu.co Production of waste cooking oil in big cities is a problem for public health in different countries around the world. Moisture decreases the performance of the transesterification reaction, since water 385 DOI: 10.3303/CET1865065 Please cite this article as: Casallas I.D., Carvajal E., Mahecha E., Castrillon C., Gomez H., Lopez C., Malagon-Romero D., 2018, Pretreatment of waste cooking oils for biodiesel production, Chemical Engineering Transactions, 65, 385-390 DOI: 10.3303/CET1865065 reacts with alkaline catalysts to generate emulsions (Carlini et al., 2014), and displaces the equilibrium of the transesterification reaction toward the reactants, causing hydrolysis of the oil.", "mime": "application/pdf"}, {"id": "cet-2974", "words": "3529", "extension": ".pdf", "flesch": "45", "author": "Dudynski, M.", "title": "Gasification of Selected Biomass Waste for Energy Production and Chemicals Recovery", "date": "2018", "keywords": "ash; ashes; biomass; feathers; gasification; process; waste", "summary": "Rocca S., van Zomeren A., Costa G., Dijkstra J., Comans R., Lombardi F., 2012, Characterisation of major component leaching and buffering capacity of rdf incineration and gasification bottom ash in relation to reuse or disposal scenarios, Waste Management 32, 759-768. In general the release of constituents through leaching is smaller for gasification ashes which are linked to the mineralogy of the ashes.", "mime": "application/pdf"}, {"id": "cet-2975", "words": "3348", "extension": ".pdf", "flesch": "48", "author": "Marques, F.H.; Guirardello, R.", "title": "Thermodynamic Analysis for Fischer-Tropsch Synthesis Using Biomass", "date": "2018", "keywords": "fischer; liquid; phase; pressure; ratio; temperature", "summary": "Low temperature Fischer\u2013Tropsch synthesis from a Sasol perspective. However, 399 this pressure effect is more accentuated for high temperatures than low temperatures.", "mime": "application/pdf"}, {"id": "cet-2976", "words": "3108", "extension": ".pdf", "flesch": "48", "author": "Mendez Reyes, D.A.; Marti Serrano, E.; Puyuelo, M.B.; Colon, J.; Ponsa, S.", "title": "Evaluation of Pre-treatments of Brewery\u2019s Spent Grain for Growing Bacteria in the Production of Polyhydroxyalkanoates", "date": "2018", "keywords": "biomass; bsg; growth; pha; pre; production; putida", "summary": "A solid-state fermentation (SSF) was carried out to evaluate PHA production. BSG is a promising substrate for bacterial growth and PHA production for its nutrient content.", "mime": "application/pdf"}, {"id": "cet-2977", "words": "3184", "extension": ".pdf", "flesch": "47", "author": "Previtali, D.; Vita, A.; Bassani, A.; Italiano, C.; Furtado Amaral, A.; Pirola, C.; Pino, L.; Palella, A.; Manenti, F.", "title": "Methanol Synthesis: a Distributed Production Concept Based on Biogas Plants", "date": "2018", "keywords": "biogas; chemical; dme; heat; methanol; plant; process; production; synthesis", "summary": "The CHPC process, in addition to electrical and heat energy, converts biogas into valuable biochemicals like methanol (MeOH), dimethyl ether (DME), acetic acid (AA) and others which, differently from biogas and 409 DOI: 10.3303/CET1865069 Please cite this article as: Previtali D., Vita A., Bassani A., Italiano C., Furtado Amaral A., Pirola C., Pino L., Palella A., Manenti F., 2018, Methanol synthesis: a distributed production concept based on biogas plants, Chemical Engineering Transactions, 65, 409-414 DOI: 10.3303/CET1865069 biomethane, are easier to transport, with a higher added value and make effective the CO2 utilization. Catalysts and Kinetics, Applied Catalysis, 36, 1-65, DOI: 10.1016/S0166-9834(00)80103-7 EurObserv\u2019ER Report, 2016, The State of Renewable Energies in Europe Guthrie K.M., 1969, Capital cost estimating, Chemical Engineering, 76, 114-142 Guthrie, K.M. Eds., 1974, Process Plant Estimating, Evaluation and Control, Craffsman Book Company, Solana Beach, USA Kim J., Park M., Kim S., Joo S., Jung K., 2014, DME synthesis from synthesis gas on the admixed catalysts of Cu/ZnO/Al2O3 and ZSM - 5, Applied Catalysis A: General, 264, 37 - 41, DOI: 10.1016/j.apcata.2003.12.058 Manenti, F., Leon-Garzon, A.R., Bozzano, G., 2013, Energy-process integration of the gas-cooled/water- cooled fixed-bed reactor network for methanol synthesis, Chemical Engineering Transactions, 35, 1243- 1248 Manenti, F., Leon-Garzon, A.R., Ravaghi-Ardebili, Z., Pirola, C., 2014, Systematic staging design applied to the fixed-bed reactor series for methanol and one-step methanol/dimethyl ether synthesis, Applied Thermal Engineering 70(2), 1228-1237, DOI: 10.1016/j.applthermaleng.2014.04.011 Manenti, Processo di conversione del biogas, 2015, patent: \u201c102017000073797, 2017\u201d Maji S., Ahmed S., Siddiqui W., Aggarwal S., Kumar A., 2015, Impact of Di-methyl Ether (DME) as an Additive Fuel for Compression Ignition Engine in Reduction of Urban Air Pollution, American Journal of Environmental Protection, 32, 48-52, DOI:10.12691/env-3-2-2 Methanex, 2018, Methanex Monthly Average Regional Posted Contract Price History, < https://www.methanex.com/our-business/pricing> accessed 01.01.2018 Ryckebosch E., Drouillon M., Vervaeren H., 2011, Techniques for transformation of biogas to biomethane, Biomass and Bioenergy, 35, 1633-1645, DOI: 10.1016/j.biombioe.2011.02.033 SimSci, PRO/II\u00ae 10.0 User Guide, 2016 Turton R.C., Bailie R.C., Whiting W.B., Shaeiwitz J.A., Bhattacharyya D., Fuller J. Eds., 2012, Analysis synthesis, and design of chemical processes fourth ed., Pretice Hall, Malloy in Ann Arbor, USA Vita A., Italiano C., Previtali D., Fabiano C., Palella A., Freni F., Bozzano G., Pino L., Manenti F., 2018, Methanol synthesis from biogas:", "mime": "application/pdf"}, {"id": "cet-2978", "words": "2596", "extension": ".pdf", "flesch": "40", "author": "Depetri, V.; Collodi, G.; Mancuso, L.; Ruggeri, F.", "title": "VESTA Methanation Applications for Small Scale, Multipurpose, Green SNG Production", "date": "2018", "keywords": "biogas; biomass; gas; methanation; power; production; sng", "summary": "Ruggeri (2012), Mancuso (2015), and Stein and Ray (2016) analysed SNG production from waste gasification and biogas upgrading as a clean and low carbon alternative to natural gas used in the transition phase to a low carbon economy. The main input data are relevant to the woody material feedstock and the outlet thermal power of produced SNG of approximately 200 MWh, which correspond to a product flowrate of 21,000 Nm3/h. Figure 5 shows the Continuously Fluidized Bed (CFB)", "mime": "application/pdf"}, {"id": "cet-2979", "words": "2559", "extension": ".pdf", "flesch": "45", "author": "Valim, I.C.; Rego, A.S.C.; Vieira, A.A.S.; Vilani, C.; Martins, A.R.F.A.; Santos, B.", "title": "Response Surface Methodologies to Investigate the Pretreatment of Sugarcane Bagasse via Alkaline Hydrogen Peroxide", "date": "2018", "keywords": "biomass; content; h2o2; lignin; model; pretreatment; temperature", "summary": "The lignocellulosic biomass was homogenized in an electric crusher in order to reduce particle size, fragmented into small fine particles and stored in a dessicator with no moisture for later use in the delignification experiments with H2O2 pretreatment. The interaction between the temperature and H2O2 concentration variables can be understood and localized using the response surface plane.", "mime": "application/pdf"}, {"id": "cet-2980", "words": "3538", "extension": ".pdf", "flesch": "45", "author": "Hammond, L.; Bai, L.; Sheehan, M.; Walker, C.", "title": "Experimental Analysis and Diffusion Modelling of Solar Drying of Macroalgae - Oedogonium sp.", "date": "2018", "keywords": "algae; drying; macroalgae; moisture; oedogonium; preparation; rate; samples; thickness; time", "summary": "Using ANOVA statistical techniques, algal preparation method and algal bed thickness or bed density and their influence on drying rate were examined. Drying rates were modelled in a pragmatic way, by assuming diffusion to be the dominant mechanism and using Fick\u2019s Second Law of Diffusion to characterise drying in terms of a materials effective diffusivity and thickness.", "mime": "application/pdf"}, {"id": "cet-3083", "words": "3931", "extension": ".htm", "flesch": "45", "author": "Cicci, A.; Bravi, M.", "title": "Fatty Acid Composition and Technological Quality of the Lipids Produced by the Microalga Scenedesmus dimorphus 1237 as a Function of Culturing Conditions", "date": "2016", "keywords": "acid; biodiesel; biomass; culture; fatty; growth; lipids; microalgae; nitrogen", "summary": "First, a neutral lipid extraction was carried out by adopting hexane as the solvent; thereafter, polar lipids were extracted by a 2:1 mixture of dichloromethane and methanol. The nature of solvents and the extraction sequence, first hexane and then dichloromethane - methanol (DM - M), entails that the hexane fraction mostly contains neutral lipids, that is triacylglycerides, while the DM - M fraction mostly contains polar lipids, such as phospholipids, glycolipids and sterols, that compose cell membranes.", "mime": "application/pdf"}, {"id": "cet-3084", "words": "3963", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-3084", "date": null, "keywords": "biomass; conditions; growth; lipid; microalgae; platensis; salinity; stress; vulgaris; x10", "summary": "On the other hand, the mixotrophic cultivation is more costly, but allows to attain relatively high lipid yields and biomass productivity (Liang et al., 2009). As expected, under mixotrophic conditions, biomass productivity is generally higher than under autotrophic conditions, in some cases more 190 than double when compared with the values obtained under autotrophic conditions, as also verified both for C. vulgaris (Liang et al., 2009) and A. platensis (Vonshak et al., 1988).", "mime": "application/pdf"}, {"id": "cet-3085", "words": "3409", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-3085", "date": null, "keywords": "acid; cheese; days; lactose; process; production; vfas; volume", "summary": "However, almost no experiments for VFAs production with immobilization in a packed-bed reactor, from CW, have been reported. After biofilm formation, the whole process of VFAs production lasted 9 days with a yield of 77% (C-molVFAs/C-molLactose).", "mime": "application/pdf"}, {"id": "cet-3086", "words": "3129", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-3086", "date": null, "keywords": "assay; cells; contact; control; nanofibers; pldl; plla; toxicity", "summary": "The graph shows the proliferation of fibroblast cells in contact with the PLLA and PLDL after 24, 48 and 72h of exposition. MTT assay for fibroblast cells cultured with PLLA and PLDL, negative control for toxicity CT(-) and positive control for toxicity CT(+) for 24 h, 48 h and 72 h.", "mime": "application/pdf"}, {"id": "cet-3087", "words": "3525", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-3087", "date": null, "keywords": "adsorption; copper(ii; equilibrium; ions; models; powder; process; sericin", "summary": "Many studies showed the development of biomaterials applied in membrane separation and adsorption processes (Gimenes et al., 2007;Turbiani et al., 2011,Chen et al., 2012; Silva et al., 2015). The monolayer adsorption process, characteristic of the Langmuir isotherm, is compatible with adsorption process that involves chemical adsorption, as the complex link 208 between metals like copper(II) and hydroxyl and carboxyl groups presents in the amino acids, what indicated preferential link between sericin surface and ion in a single monolayer.", "mime": "application/pdf"}, {"id": "cet-3088", "words": "3265", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-3088", "date": null, "keywords": "acid; concentration; fermentation; glucose; production; succinic; succinogenes; sugar", "summary": "This contribution reports the characterization of succinic acid fermentation by A. succinogenes 130Z adopting as carbon source sugars representative of the hydrolysis of lignocellulosic biomass: glucose, mannose, arabinose, and xylose. Van Heerden C.D., Nicol W., 2013, Continuous succinic acid fermentation by Actinobacillus succinogenes, Biochem.", "mime": "application/pdf"}, {"id": "cet-3089", "words": "4057", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-3089", "date": null, "keywords": "abe; acetone; butanol; cheese; concentration; fermentation; lactose; production; whey", "summary": "Qureshi N., Maddox I.S., 2005, Reduction in butanol inhibition by perstraction: utilization of concentrated lactose/whey permeate by Clostridium acetobutylicum to enhance butanol fermentation economics, Food and Bioproducts Processing, 83, 43\u201352. Depending on the particular circumstances and the industrial objectives, and given the polluting nature of cheese whey (especially regarding COD), it could be desirable to maximize lactose consumption by microorganisms instead of prioritizing high butanol productions.", "mime": "application/pdf"}, {"id": "cet-3090", "words": "4135", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-3090", "date": null, "keywords": "acid; concentration; glucose; hydrolysis; inhibitors; pretreatment; sugars; switchgrass; time; total; xylose", "summary": "The results show a strong dependence of total sugars recovery and total fermentation inhibitors on acid concentration, and a weaker dependence on solid load and acid hydrolysis time. Different combinations of acid concentration, solid load and acid hydrolysis time were planned by an experimental design according to the RSM design.", "mime": "application/pdf"}, {"id": "cet-3091", "words": "3128", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-3091", "date": null, "keywords": "butanol; concentration; fermentation; mass; peels; production; residues; tests; water", "summary": "Table 2: Relevant data of C. acetobutylicum fermentation tests for the different apple peels to water mass ratios. This contribution is about the characterization of the ABE fermentation by Clostridium acetobutylicum DSM 792 using sugars from fruit peels.", "mime": "application/pdf"}, {"id": "cet-3092", "words": "2445", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-3092", "date": null, "keywords": "biomass; culture; days; dha; production", "summary": "It was found that in order to improve biomass production a large amount of culture media must be replaced (>90%), however after the third cycle biomass production was reduced from 10 g/L to 9 g/L; similarly under the same conditions lipids and DHA production increased from 15% to 20% (w/w) and from 3 to 5% (w/w) respectively in the first 3 cycles and then reduced in cycle 5. 3. Results and discussion Results for biomass production (figure 1) shown that culture times no larger than 4 days coupled with larger exchange of culture media will improve biomass concentration up to 10 g/L (productivity of 2 g/L*d-1), these results agree with those reported by Hong et al (2011) and Lee Chang et al (2013) where high initial concentrations of glucose boost biomass and lipid production durign the first 49 hr; however, substrate glucose levels as high as 100 g/L resulted in the retardation of biomass production in Aurantiochytrium strains (Yaguchi et al. 1997; Wong et al. 2008).", "mime": "application/pdf"}, {"id": "cet-3093", "words": "3537", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-3093", "date": null, "keywords": "bicarbonate; biomass; carbohydrates; cultivation; growth; l-1; production; sodium", "summary": "In order to test the possibility to cultivate Synechoccocus PCC 7002 by using bicarbonate ion as a source of carbon instead of CO2, batch experiments were carried out with different concentrations of sodium bicarbonate, ranging between 5.5 and 88 g L-1. In this work we studied the tolerance of Synechococcocus PCC 7002 to sodium bicarbonate concentration evaluating its biomass production and carbohydrates accumulation in batch conditions, as well as their relationship with nutrients such as N and P, in view to evaluate this alternative carbon source for cyanobacterial cultivation.", "mime": "application/pdf"}, {"id": "cet-3094", "words": "2681", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-3094", "date": null, "keywords": "biomass; botryococcus; braunii; hydrocarbons; lipids; nitrogen; production", "summary": "Hydrocarbon production from secondarily treated piggery wastewater by the green alga Botryococcus braunii. Studies on batch and continuous cultures of Botryococcus braunii: hydrocarbon production in relation to physiological state, cell ultrastructure, and phosphate nutrition.", "mime": "application/pdf"}, {"id": "cet-3096", "words": "3739", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-3096", "date": null, "keywords": "activity; cell; healing; honey; image; mixtures; time; vitro; wound", "summary": "Before starting the experiments, the wounded cell monolayers were covered with fresh culture medium supplemented or not with different honeys or honey mixtures at 0.1 % or 1 % (v/v). Honey samples were placed, as received, in glass containers and stored in the dark at room temperature until use.", "mime": "application/pdf"}, {"id": "cet-3260", "words": "2451", "extension": ".pdf", "flesch": "54", "author": "Kim, S.M.", "title": "Characterizing Physical States of Agricultural Products Using Magnetic Resonance Imaging", "date": "2015", "keywords": "figure; images; magnetic; mri; parameters; resonance", "summary": "Magnetic resonance parameters from a series of magnetic resonance images with different echo times (TEs) at different locations of the sample were acquired. Chapman and Hall, London, U.K. Milczarek R., 2009, Multivariate image analysis: An optimization tool for characterizing damage-related attributes in magnetic resonance images of processing tomatoes.", "mime": "application/pdf"}, {"id": "cet-3261", "words": "4178", "extension": ".pdf", "flesch": "45", "author": "De Farias Silva, C.E.; De Oliveira Moura, E.M.; De Souza, J.E.A.; Abud, A.K.S.", "title": "Quality Control of Tropical Fruit Pulp in Brazil", "date": "2015", "keywords": "brazil; control; food; fruit; haccp; portuguese; processing; production; pulp; quality; standards; title", "summary": "Figure 1: Industrial process of fruit pulp production. Finally, the third aspect directs to the physicochemical characteristics of pulp fruit, Identity and Quality Standards (IQS's) and the parameters such as content of total soluble solids (\u00b0Brix), pH, acidity, total solids, total sugars and vitamin C, with specific values for each fruit flavor, that indicates whether during cultivation occurred some negligences on the nutritional aspect of the plant or, in the latter case, adulteration during processing and packaging, as addition of preservatives, acidulants or dilution of the pulp to increase yield.", "mime": "application/pdf"}, {"id": "cet-3262", "words": "3545", "extension": ".pdf", "flesch": "44", "author": "Barretto, L.; Andrade, T.; Leao, K.; Moreira, J.; Freitas, S.", "title": "Antioxidant Capacity Improvement of Cashew Apple Bagasse", "date": "2015", "keywords": "antioxidant; cashew; compounds; extraction; hydrolysis; ratio; sample; sample ratio; solvent; tpc", "summary": "Among conventional methods such as solvent extractions, enzyme technology is an alternative to obtain bioactive compounds from agro-industrial byproducts (Azmir et al., 2013). Many studies have reported that cashew apple presents an important source of bioactive compounds like flavonoids (Lopes et al., 2012) carotenoids (Moo-Huchin et al., 2014) and anthocyanins (Silva et al., 2014).", "mime": "application/pdf"}, {"id": "cet-3263", "words": "3342", "extension": ".pdf", "flesch": "52", "author": "Casazza, A.; Aliakbarian, B.; Mura, M.; Chasseur, M.; Freguglia, M.; Valentini, S.; Palombo, D.; Perego, P.", "title": "Polyphenols from Grape and Apple Skin: a Study on Non-Conventional Extractions and Biological Activity on Endothelial Cell Cultures", "date": "2015", "keywords": "apple; compounds; extraction; grape; hpte; mae; phenolic; polyphenols; skins; sle", "summary": "Dried samples were subjected to microwave assisted extraction (110 \u00b0C, 60 min) and high pressure and temperature extraction (150 \u00b0C, 150 min). 110 \u00b0C, 60 min) and high pressure and temperature extraction (HPTE, 150 \u00b0C, 150 min).", "mime": "application/pdf"}, {"id": "cet-3264", "words": "3350", "extension": ".pdf", "flesch": "49", "author": "Fontanelli, M.; Frasconi, C.; Martelloni, L.; Pirchio, M.; Raffaelli, M.; Peruzzi, A.", "title": "Innovative Strategies and Machines for Physical Weed Control in Organic and Integrated Vegetable Crops", "date": "2015", "keywords": "carrot; control; crop; garlic; peruzzi; weed", "summary": "Physical weed control is the most common alternative adopted by organic farmers and includes mechanical means used for soil tillage (Cloutier et al., 2007) and the use of thermal radiation for weed control (Ascard et al., 2007). The application of the innovative strategies resulted also in relevant reductions of the hand labour time needed for weed control (that often represents the main cost for organic vegetable producers) in comparison with the use of the traditional managements.", "mime": "application/pdf"}, {"id": "cet-3265", "words": "3718", "extension": ".pdf", "flesch": "54", "author": "Cascone, S.; Apicella, P.; Caccavo, D.; Lamberti, G.; Barba, A.A.", "title": "Optimization of Chelates Production Process for Agricultural Administration of Inorganic Micronutrients", "date": "2015", "keywords": "eddha; fe3; feed; iron; plants; process; solution; yield", "summary": "The use of chelated iron ensures the necessary iron requirement because the chelating agents act as carrier of iron ion (Fe3+) which it is released at the interface with the plant roots, where the iron is adsorbed. Due to the large use of chelated iron, many production processes have been proposed but all of them drove to the production of a mixture of the three position isomers of EDDHA/Fe3+: o,o-EDDHA/Fe3+, the more stable and consequently the more incisive in the iron chlorosis treatment, which have six bonds with the iron ion, o,p-", "mime": "application/pdf"}, {"id": "cet-3266", "words": "3728", "extension": ".pdf", "flesch": "35", "author": "Falcone, G.; Strano, A.; Stillitano, T.; De Luca, A.I.; Iofrida, N.; Gulisano, G.", "title": "Integrated Sustainability Appraisal of Wine-growing Management Systems through LCA and LCC Methodologies", "date": "2015", "keywords": "assessment; cycle; lca; life; life cycle; production; systems; water; wine", "summary": "In particular, through a common life cycle inventory, which includes technical and economic primary data on input and output of production systems life cycle, the ReCiPe impact categories (with a focus on water assessment) and the net cash flows associated to specific financial indices were taken into account. Margni M., Rossier D., Crettaz P., Jolliet O., 2002, Life cycle impact assessment of pesticides on human health and ecosystems, Agriculture Ecosystems & Environment, 93(1-3), 379-392. MIPAAF, 2011, DM 30.11.2011, Disciplinare di produzione dei vini a denominazione di origine controllata \u00abCir\u00f2\u00bb, Roma.", "mime": "application/pdf"}, {"id": "cet-3267", "words": "2586", "extension": ".pdf", "flesch": "62", "author": "Kutinkova, H.; Arnaudov, V.; Dzhuvinov, V.", "title": "Sustainable Control of Oriental Fruit Moth, Cydia molesta Busck, Using Isomate OFM Rosso Dispensers in Peach Orchards in Bulgaria", "date": "2015", "keywords": "damage; fruit; ofm; orchard; peach; reference; trial", "summary": "Mating disruption (MD) was tested as an alternative method controlling oriental fruit moth (OFM), Cydia molesta Busck from post-bloom till harvest. In the reference, conventionally treated orchard, 5-9 insecticide treatments were applied to control oriental fruit moth, peach twig borer (PTB), aphids and other pests.", "mime": "application/pdf"}, {"id": "cet-3268", "words": "3469", "extension": ".pdf", "flesch": "53", "author": "Caccavo, D.; Cascone, S.; Amoroso, M.; Apicella, P.; Lamberti, G.; Barba, A.A.", "title": "Hydrogel-Based Granular Phytostrengtheners for Prolonged Release: Production and Characterization", "date": "2015", "keywords": "density; granules; hpmc; mass; particles; release", "summary": "As it can be seen, the morphology of GD can be collocated in between the one of HPMC granules and GC. Review on materials & methods to produce controlled release coated urea fertilizer.", "mime": "application/pdf"}, {"id": "cet-3269", "words": "2550", "extension": ".pdf", "flesch": "56", "author": "Figueiredo, V.; Miranda, J.A.; Colares, L.; Carvalho, J.L.V.; Castro, I.; Carvalho, L.M.J.", "title": "Organophosphorus Pesticides Residues in Cooked Capsicum annuum", "date": "2015", "keywords": "annuum; capsicum; food; min; pesticide; residues; samples", "summary": "It is interesting to know the processing effects on pesticide residue, thus, this work aimed to evaluate the residual concentrations of organophosphorus in Capsicum annuum The study showed the importance of the assessment of pesticide residues in plant foods thermally processed.", "mime": "application/pdf"}, {"id": "cet-3270", "words": "3363", "extension": ".pdf", "flesch": "64", "author": "Carvalho, L.M.J.; Carvalho, J.L.V.; Faustino, R.M.; Maroto, I.; Lima, V.; Feijo, D.", "title": "Variability of Total Carotenoids in C. moschata Genotypes", "date": "2015", "keywords": "carotene; carotenoids; contents; genotypes; moschata; pumpkin; samples", "summary": "The study of pumpkin C. moschata genotypes is part of the project Biofortification in Brazil: Gajewski et al. (2008) found in the cultivar C. moschata variety \u201cZemcuzina\u201d, ex Poir, total carotenoids contents of 64.5 \u00b5g.g-1 in fresh samples.", "mime": "application/pdf"}, {"id": "cet-3271", "words": "4050", "extension": ".pdf", "flesch": "46", "author": "Alonso, E.; Torrado, A.; Perez Guerra, N.", "title": "Major Volatile Composition of Four Distilled Alcoholic Beverages Obtained from Fruits of the Forest", "date": "2015", "keywords": "alonso; beverages; currant; distillates; et al; fruits", "summary": "Although there is information available on the use of fruit of the forests to produce alcoholic beverages (Vuli\u0107 et al., 2012), the volatile composition of these spirit drinks was found to be dependent on the origin of the fruits (Vuli\u0107 et al., 2012), the microbial starter (Sorrentino et al., 2012), the methods of fermentation and distillation used (Alonso et al., 2011) and the time and storage system (Soufleros et al., 2004). 254 A cluster analysis was used to determine the similarity or dissimilarity between the RB, AB, BM and BC distillates obtained from and other alcoholic beverages including Bacanora samples obtained from four regions of the Sonora state in northwestern M\u00e9xico: the Central and Southern Region (BacCS), the Sonora River (BacSR), the High Sierra (BacHS) and the Sierra Baja (BacSB) (\u00c1lvarez et al., 2013); four commercial Galician orujo spirits: Albari\u00f1o (AL), Mencia (ME), Godello (GO) and Treixadura (TR) (Di\u00e9guez et al., 2005); Greek blackberry distillate (BBD) (Soufleros et al., 2004); Portuguese whey distillate (WD) (Dragone et al., 2009); Portuguese bagaceiras (BAG) (Silva et al., 1996); distilled alcoholic beverages obtained from black mulberry (BM) (Alonso et al., 2010), black currant (BC) (Alonso et al., 2010), red raspberry (RB) (Alonso et al., 2011) and arbutus berry (AB) (Alonso et al., 2011); distilled alcoholic beverages obtained from black currant cultivars: Malling Juel (BCMJ), Ometa (BCO) and Ben Sarek (BCBS) and red currant cultivars: Rondom (RCR) and Versailles (RCV) grown in Serbia (Vuli\u0107 et al., 2012); a home-made spirit beverage from cornelian cherry fruits (CCH) (Te\u0161evi\u0107 et al., 2009).", "mime": "application/pdf"}, {"id": "cet-3272", "words": "4153", "extension": ".pdf", "flesch": "50", "author": "Gama, B.; De Farias Silva, C.E.; Oliveira Da Silva, L.M.; Abud, A.K.S.", "title": "Extraction and Characterization of Pectin from Citric Waste", "date": "2015", "keywords": "acid; analysis; citric; degree; esterification; extraction; food; orange; pectin; temperature; texture", "summary": "In the experimental conditions studied, it was noticed that at higher heating time (90 min), acid concentration (6%) and temperature (90 \u00b0C) it was obtained the highest yield of pectin extraction, around 78 %, with an esterification degree of 8%, that indicates a low degree of pectin methoxylation. Table 2: Conditions and experimental design responses for pectin extraction.", "mime": "application/pdf"}, {"id": "cet-3273", "words": "3417", "extension": ".pdf", "flesch": "56", "author": "Shamsudin, R.; Buang, S.; Aziz, N.A.", "title": "Effect of Different Extraction Methods on the Physico-chemical Properties of Pomelo Juice", "date": "2015", "keywords": "content; extraction; fruit; juice; method; pomelo; screw; type", "summary": "The extraction methods evaluated for pomelo juice extraction had significantly influence the yield of juice extraction. Phytochemicals Composition Is Modulated by Household Processing Techniques, Journal of Food Science, 77(9), 921-926 269 Shah, N.N.A.K., Rahman, R.A., Shamsudin, R., and Adzahan, N.M., 2012, Effect of enzymatic clarification treatment on phenolic compounds of Pummelo (Citrus grandis L. Osbeck) fruit juices, International Conference on Agriculture and Food Engineering for Life (Cafei 2012), 26-28 November 2012 Sunil, P., Ravinder, P., Subrata, M., 2011, Effect of juice extraction methods and processing temperature-time on juice quality of Nagpur mandarin (Citrus reticulate Blanco) during storage, Journal of Food science Technology, 48(2),197-203 Toh, J.J., Khoo, H.E. and Azrina, A., 2013, Comparison of antioxidant properties of pomelo (Citrus Grandis (L) Osbeck) varieties, International Food Research Journal 20(4), 1661-1668 Vishal, S.B., and Sanjay, K.S., 2009, Standardization of Extraction Methods and Preservation Techniques of Hill Lemon Juice, Journal of Scientific & Industrial Research 68, 608-610 Yang, B., Jiang, Y., Shi, J., Chen, F., and Ashraf, M., 2011, Extraction and pharmacological properties of bioactive compounds from longan (Dimocarpus longan Lour.)", "mime": "application/pdf"}, {"id": "cet-3274", "words": "3382", "extension": ".pdf", "flesch": "52", "author": "Jimenez-Jimenez, F.; Blanco-Roldan, G.L.; Castillo-Ruiz, F.J.; Castro-Garcia, S.; Sola-Guirado, R.R.; Gil-Ribes, J.A.", "title": "Table Olives Mechanical Harvesting with Trunk Shakers: Orchard Adaption and Machine Improvements", "date": "2015", "keywords": "efficiency; fruit; harvesting; olive; orchards; shakers; table; tree; trunk; vibration", "summary": "Three types of table olive orchards were tested: traditional, traditional trained to mechanical harvesting and intensive DOI: 10.3303/CET1544046 Please cite this article as: Jimenez-Jimenez F., Blanco-Roldan G.L., Castillo-Ruiz F.J., Castro-Garcia S., Sola-Guirado R.R., Gil-Ribes J.A., 2015, Table olive mechanical harvesting with trunk shakers: orchard adaptations and machine improvements, Chemical Engineering Transactions, 44, 271-276 DOI: 10.3303/CET1544046 271 (Figure 1). Conclusions In conclusion, trunk shaker mechanical harvesting of table olives without complementary rod beating or the use of abscission agents required the implementation of initiatives to improve harvesting efficiency.", "mime": "application/pdf"}, {"id": "cet-3275", "words": "2118", "extension": ".pdf", "flesch": "58", "author": "Schmilovitch, Z.; Alchanatis, V.; Ignat, T.; Hoffman, A.; Egozi, H.; Ronen, B.; Ostrovsky, V.; Vinokur, Y.; Rodov, V.", "title": "Machinery for Fresh Cut Watermelon and Melon", "date": "2015", "keywords": "cut; cutting; figure; flesh; fruit; system", "summary": "The success of this system will be evaluated in commercial use in the close future and we believe this product has potential of success as fresh cut melons as such are being introduce to the consumers already(Lima R. 2014). Additionally several mechanical cutting DOI: 10.3303/CET1544047 Please cite this article as: Schmilovitch Z., Alchanatis V., Ignat T., Hoffman A., Egozi H., Ronen B., Ostrovsky V., Vinokur Y., Rodov V., 2015, Machinery for fresh cut watermelon and melon, Chemical Engineering Transactions, 44, 277-282 DOI: 10.3303/CET1544047 277 were tested, including punctures based on smooth and perforated steel tubes as shown in Figure 1, which are short cylinders suitable to cut 50 mm slice.", "mime": "application/pdf"}, {"id": "cet-3276", "words": "2848", "extension": ".pdf", "flesch": "44", "author": "Sannini, A.; Albanese, D.; Malvano, F.; Crescitelli, A.; Di Matteo, M.", "title": "An Amperometric Biosensor for the Determination of Lactic Acid During Malolactic Fermentation", "date": "2015", "keywords": "acid; biosensor; fermentation; lox; mlf; screen; wine", "summary": "Some authors overcome interference problem, related to the application of LOX biosensors in the analysis of food samples, using polyaniline-co-fluoroaniline films (Suman et al., 2005) or combining polysulfone multiwalled nanotubes with ferrocene (Perez and Fabregas, 2012). LOX biosensor was stored at 4 \u00b0C before use.", "mime": "application/pdf"}, {"id": "cet-3277", "words": "2570", "extension": ".pdf", "flesch": "58", "author": "Duga, A.; Ruysen, K.; Dekeyser, D.; Nuyttens, D.; Baylemans, D.; Nicolai, B.; Verboven, P.", "title": "CFD Based Analysis of the Effect of Wind in Orchard Spraying", "date": "2015", "keywords": "effect; figure; spray; sprayer; trees; view; wind", "summary": "This combined with the small wind magnitude at lower heights of the boundary layer results in insignificant wind effect within this zone. The contour plots on Figures 3, 4 and 5 show the amount of spray deposited on the ground and the amount detected in the air around the sprayer under different wind conditions.", "mime": "application/pdf"}, {"id": "cet-3278", "words": "2878", "extension": ".pdf", "flesch": "50", "author": "Best, S.; Leon, L.; Quintana, R.", "title": "Development of a Differential Grape Harvesting Methodology", "date": "2015", "keywords": "areas; definition; grapes; index; information; model; quality; soil", "summary": "At present, it is proposed to solve the implementation of emerging technologies associated to precision viticulture for the development and management, moreover, the current procedures which are used for the study in the definition of quality areas, suffer from own replicable protocols, which we start to testing in others vineyard to validate the result of this study under different productive conditions. As well, to carry out the definition of quality of grapes, we use the index of Ferari Index evaluations (highly correlated to anthocyanins), with multiplex equipment (MULTIPLEX RESEARCH, FORCE-A) for the definition of quality areas.", "mime": "application/pdf"}, {"id": "cet-3279", "words": "2988", "extension": ".pdf", "flesch": "54", "author": "Manfrini, L.; Pierpaoli, E.; Zibordi, M.; Morandi, B.; Muzzi, E.; Losciale, P.; Corelli Grappadelli, L.", "title": "Monitoring Strategies for Precise Production of High Quality Fruit and Yield in Apple in Emilia-Romagna", "date": "2015", "keywords": "apple; diameter; fruit; growth; harvest; production; size", "summary": "Because the growth rate of apple fruit has been shown to be linear in the second part of the season (Goffinet et al. 1995) when the fruit enlargement is driven by cell expansion, an accurate prediction of fruit diameter (size) at a nominal harvest date can be made as reported in table 1 (Lakso et al. 1995). Ellis, K., Baugher, T. A., Lewis, K., 2010, Results from survey instruments used to assess technology adoption for tree fruit production.", "mime": "application/pdf"}, {"id": "cet-3280", "words": "2838", "extension": ".pdf", "flesch": "51", "author": "Giles, D.; Billing, R.", "title": "Deployment and Performance of a UAV for Crop Spraying", "date": "2015", "keywords": "aircraft; application; deposition; rate; spray; spraying; uav", "summary": "Spray application rate as determined by swatch width and number of passes per swath Number of rows treated in swath (width in m) Secondly, spray application rates on the order of 10 to 50 l/ha can be achieved through manipulation of the flight patterns and effective swath width.", "mime": "application/pdf"}, {"id": "cet-3281", "words": "3128", "extension": ".pdf", "flesch": "51", "author": "Oliveira, T.; Beneducci, W.; Bonfim, P.; Foschini, M.; Fruett, F.; Castellanos Rodriguez, J.C.; Ferreira, M.", "title": "Embedded System for Monitoring Impact Magnitude during Orange Transport", "date": "2015", "keywords": "acceleration; equipment; middle; position; threshold", "summary": "Comparing the frequency of events related to equipment position in the vehicle, it was observed that for Section 2 there were a significantly higher number of events above 9.3/10 km compared to equipment located in the middle, 0.8/10 km (p = 0.011). An interaction between equipment position within the vehicle body and type of route section was also observed in the statistical analysis.", "mime": "application/pdf"}, {"id": "cet-3282", "words": "3445", "extension": ".pdf", "flesch": "48", "author": "Ansah, F.A.; Amodio, M.L.; Colelli, G.", "title": "Evaluation of the Impact of Nitrous oxide use on Quality and Shelf life of Packaged Fresh-cut \u2018Iceberg\u2019 Lettuce and Wild Rocket", "date": "2015", "keywords": "cut; gas; lettuce; n2o; pp+pa; pp+pet; rocket; storage", "summary": "The results suggested that nitrous oxide gas does not improve quality compared nitrogen modified atmosphere storage. Weight retention in gas sealed lettuce may have resulted from the steam barrier properties of the PP+PA and PP+PET packaging materials (Carvalho and Clemente, 2004).", "mime": "application/pdf"}, {"id": "cet-3283", "words": "3790", "extension": ".pdf", "flesch": "44", "author": "Milani, P.; Prato, A.M.; Monteiro, A.R.; Maioral, M.; Benossi Marchi, L.; Costa, S.C.", "title": "Assessment of Operating Parameters, Membrane Fouling and Juice Quality During Acerola Ultrafiltration", "date": "2015", "keywords": "acerola; coefficient; juice; kda; membrane; permeate; pressure; psi; rejection; transmembrane; ultrafiltration", "summary": "Membrane processes are consolidated systems in various sectors of production for their capacity to operate at room temperature under low energetic consumption. Vaillant F., Cisse M., Chaverri M., Perez A., Dornier M., Viquez A., Dhuique-Mayer C., 2005, Clarification and concentration of melon juice using membrane processes, Innovative Food Science & Emerging technologies.", "mime": "application/pdf"}, {"id": "cet-3284", "words": "3537", "extension": ".pdf", "flesch": "45", "author": "Vieira Ramos, M.; Wurlitzer, N.; Machado, T.F.; Sucupira, N.R.; Modesto, A.L.G.", "title": "Validation of an Aseptic Packaging System of Liquid Foods Processed by UHT Sterilization", "date": "2015", "keywords": "air; area; control; evaluation; filler; filling; food; process; processing; results; training; uht", "summary": "The list of identified CCP helped, however, in getting processing improvements and operational control, indicating the importance of monitoring the hazards and critical limits for the implementation of corrective actions related to UHT sterilization and aseptic filling process. This study aimed to validate an aseptic filling system of liquid food treated by UHT sterilization process in a pilot plant, through microbiological study of environmental air quality in the processing unit.", "mime": "application/pdf"}, {"id": "cet-3285", "words": "3514", "extension": ".pdf", "flesch": "47", "author": "Adobati, A.; Uboldi, E.; Franzetti, L.; Limbo, S.", "title": "Shelf Life Extension of Raspberry: Passive and Active Modified Atmosphere Inside Master Bag Solutions", "date": "2015", "keywords": "carbon; dioxide; gas; life; master; oxygen; packaging; quality; raspberries; shelf; storage", "summary": "During raspberry life, physiological decay occurs due to the high respiration rates. We observed the most satisfactory behaviour in raspberries storage was found by using the lowest barrier master bags (C) with maximum rejection of 10 % at the final stage of the test.", "mime": "application/pdf"}, {"id": "cet-3286", "words": "2902", "extension": ".pdf", "flesch": "43", "author": "Antonello, Franco; Dedominicis, Davide; Ivaldi, Alessandro; Fiocca, Graziano; Tomiato, Loris", "title": "Reliability Analysis and Risk Analysis: Integration between Hazop, FMEDA and Fault Tree Analysis for SIL Assessment", "date": "2016", "keywords": "analysis; event; failure; fault; reliability; software", "summary": "DOI: 10.3303/CET1648001 Please cite this article as: Antonello F., Dedominicis D., Ivaldi A., Fiocca G., Tomiato L., 2016, Reliability analysis and risk analysis:integration between hazop and fault tree analysis, Chemical Engineering Transactions, 48, 1-6 DOI:10.3303/CET1648001 1 2. The described method incorporates in a single software, with the use of a single data input, all the steps typical of risk analysis: the division of the system into nodes for HazOp application, the calculation of the frequencies of TopEvents and Minimal CutSets, and the construction of fault trees and event trees, as well as evaluation of the system SIL.", "mime": "application/pdf"}, {"id": "cet-3287", "words": "3121", "extension": ".pdf", "flesch": "53", "author": "Mishra Kirti, Bhushan; Schmidt, Simon; Wehrstedt, Klaus-Dieter", "title": "CFD Based Reproduction of Amuay Refinery Accident 2012", "date": "2016", "keywords": "boundary; cloud; dispersion; gas; lpg; refinery; time; wind", "summary": "Turbulence is a main reason for fluid mixing in shear layers of adjacent fluid phases and is important for the spreading and dilution of gas clouds. on the Assessment and Control of Major Hazards, The Institution of Chemical, 143-164 Hyatt N., 2003, Guidelines for Process Hazards Analysis (PHA, HAZOP), Hazards Identification, and Risk Analysis, CRC-Press, Boca Raton (Florida), U.S. Koopman, R.P., Ermak, D.L., Chan, S.T., 1989, A review of recent field tests and mathematical modelling of atmospheric dispersion of large spills of denser-than-air gases, Atmospheric Environment, 23, 731-745 Luketa-Hanlin A., Koopman R.P., Ermak D.L., 2007, On the application of computational fluid dynamics codes for liquefied natural gas dispersion, 140, 504-517 Mannan, S., 2015, Lees' Loss prevention in the process industries: Hazard identification, assessment and control, Elsevier Butterworth-Heinemann, Oxford, UK McQuaid J., 1984, Large scale experiments on the dispersion of heavy gas clouds, Atmospheric Dispersion of Heavy Gases and Small Particles, 129-138 Menter F.R., Kuntz M., Langtry R., 2003, Ten years of industrial experience with the SST turbulence model, Turbulence, Heat and Mass Transfer, 4 Mishra K.B., Wehrstedt K.D., Krebs H., 2014, Amuay refinery disaster: The aftermaths and challenges ahead, Fuel Processing Technology, 119, 198-203 Pasquill F., Smith F.B., 1983, Atmospheric diffusion, Ellis Horwood Ltd, Hemel Hempstead, UK Petroleum world, http://www.petroleumworld.com/storyt13091001.htm, accessed 07.08.2015 Puttock J.S., Colenbrander G.W., 1985, Thorney Island data and dispersion modeling, Journal of Hazardous Materials, 11, 381-397 Sklavounos S., Rigas F., 2004, Validation of turbulence models in heavy gas dispersion over obstacles, Journal of Hazardous Materials, 108, 9-2 Tauseef S.M., Rashtchian D., Abbasi T., Abbasi, S.A., 2011, A method for simulation of vapour cloud explosions based on computational fluid dynamics (CFD), Journal of Loss Prevention in the Process Industries, 24, 638-647 12", "mime": "application/pdf"}, {"id": "cet-3288", "words": "3018", "extension": ".pdf", "flesch": "40", "author": "Breitung, Wolfgang; Kotchourko, Alexei; Yanez, Jorge", "title": "Analysis Methodology for Hydrogen Accident Scenarios in Complex Industrial Environments", "date": "2016", "keywords": "air; analysis; combustion; figure; flame; generator; hydrogen; release; turbine", "summary": "To calculate the space and time dependent hydrogen distribution with a three-dimensional code the following input is needed: a) 3d geometry of the plant in the best possible resolution, b) mitigation measures installed in the building, e.g. ventilation, c) definition of the initiating event and accident scenario, d) definition of the gas DOI: 10.3303/CET1648003 Please cite this article as: Breitung W., Kotchourko A., Yanez J., 2016, Analysis methodology for hydrogen accident scenarios in complex industrial environments, Chemical Engineering Transactions, 48, 13-18 DOI:10.3303/CET1648003 13 Figure 1 Steps in the mechanistic analysis of accident scenarios with unintended release of hydrogen. Breitung W., Chan C., Dorofeev S., Eder A., Gelfand D., Heitsch M. Klein R., Malliakos A., Shepherd E., Studer E., Thibault P., 2000, State-of-the-art report on flame acceleration and deflagration-to-detonation transition in nuclear safety, OECD Report NEA/CSNI/R(2000)7 Dorofeev S.B., Sidorov V.P. Kuznetsov M.S., Matsukov I.D., Alekseev V.I., 2000, Effect of scale on the onset of detonations, Shock Waves 10 (2), 2000, 137-149 Dorofeev S.B., Kuznetsov M.S., Alekseev V.I., Efimenko A.A., Breitung W., 2001, Evaluation of limits for effective flame acceleration in hydrogen mixtures, Journal of Loss Prev. in the Process Industr., 14, pp.", "mime": "application/pdf"}, {"id": "cet-3289", "words": "2441", "extension": ".pdf", "flesch": "42", "author": "Guinand, Charles; Dabros, Michal; Roduit, Bertrand; Meyer, Thierry; Stoessel, Francis", "title": "Thermal Process Safety Based on Reaction Kinetics and Reactor Dynamics", "date": "2016", "keywords": "figure; heat; model; reaction; reactor; safety; set; temperature", "summary": "Willson R. J., Beezer A. E., 2003, A mathematical approach for the calculation of reaction order for common solution phase reactions, Thermochim. 2 A B C D C E C E E + \u2192 + \u2192 + \u2192 (1) (2) (3) Figure 2: Reaction scheme describing the kinetic behaviour of a synthesis reaction followed by an autocatalytic decomposition.", "mime": "application/pdf"}, {"id": "cet-3290", "words": "3613", "extension": ".pdf", "flesch": "53", "author": "Le Hong, Duc; Lacome, Jean-Marc; Vignes, Alexis; Debray, Bruno; Truchot, Benjamin; Fede, Pascal; Climent, Eric", "title": "A Few Fundamental Aspects Related to the Modelling of an Accidental Massive Jet Release of Nanoparticles", "date": "2016", "keywords": "agglomeration; approach; brownian; field; model; motion; particle; phase; release", "summary": "Due to computer limitations, Elghobashi (1993) classified the influence between particles phase and fluid turbulence depending on the volume fraction of particulate phase. Those classical phenomena, presented in Figure 1, influence strongly the agglomeration and increase the complexity of modelling NP jets.", "mime": "application/pdf"}, {"id": "cet-3291", "words": "2292", "extension": ".pdf", "flesch": "47", "author": "van Wingerden, Kees; Salaun, Nicolas", "title": "LNG-Engine Safety: Design of Protective Measures Using CFD", "date": "2016", "keywords": "exhaust; explosion; flacs; gas; ignition; release", "summary": "The current paper addresses two aspects: the possibility of explosions in gas engine exhausts and the possibility and mitigation of hazards associated with gas releases into the building containing the gas engine, sometimes referred to as the powerhouse. To limit the consequences of such exhaust pipe explosions explosion vents can be installed.", "mime": "application/pdf"}, {"id": "cet-3292", "words": "3671", "extension": ".pdf", "flesch": "49", "author": "Roduit, Bertrand; Hartmann, Marco; Folly, Patrick; Sarbach, Alexandre; Brodard, Pierre; Baltensperger, Richard", "title": "New Kinetic Approach for Evaluation of Hazard Indicators Based on Merging DSC and ARC or Large Scale Tests", "date": "2016", "keywords": "aibn; dsc; heat; kinetic; reaction; sadt; scale; temperature", "summary": "Roduit B., Hartmann M., Folly P., Sarbach A., Brodard P., Baltensperger R., 2015, Thermal decomposition of AIBN, Part B: Simulation of SADT value based on DSC results and large scale tests according to conventional and new kinetic merging approach, Thermochim. DOI: 10.3303/CET1648007 Please cite this article as: Roduit B., Hartmann M., Folly P., Sarbach A., Brodard P., Baltensperger R., 2016, New kinetic approach for evaluation of hazard indicators based on merging dsc and arc or large scale tests, Chemical Engineering Transactions, 48, 37-42 DOI:10.3303/CET1648007 37 2.", "mime": "application/pdf"}, {"id": "cet-3293", "words": "3197", "extension": ".pdf", "flesch": "32", "author": "Leitl, Bernd; Harms, Frank; Berbekar, Eva; Boris, Jay; Patnaik, Gopal; Obenschain, Keith; Fischer, Susanne", "title": "Local-Scale Hazmat Dispersion Modelling for First Responders Based on High-Resolution Computational Fluid Dynamics - an Overview of CT-Analyst Hamburg", "date": "2016", "keywords": "analyst; dispersion; flow; hamburg; scale; time; tool; wind", "summary": "As far as general measurement data quality is concerned, test datasets must contain sufficient information on wind flow to both derive all required input boundary conditions to run a certain flow model and to sufficiently validate predicted flow patterns within the corresponding model domain. Due to the turbulent nature of wind flows driving local- scale dispersion in complex environments, instantaneous wind fields and fluctuations in wind speed and direction must be simulated and validated correspondingly.", "mime": "application/pdf"}, {"id": "cet-3294", "words": "3526", "extension": ".pdf", "flesch": "51", "author": "Mazzarotta, Barbara; Bubbico, Roberto", "title": "Predicting Evaporation Rates from Pools", "date": "2016", "keywords": "data; evaporation; models; rates; velocity; wind", "summary": "Simplified models of evaporation rates from pools In the present section some simplified models for estimating the evaporation rates from pools are very briefly recalled: for all details reference should be done to the respective original papers. The \u201cYellow Book\u201d (Van den Bosch and Weterings, 2005) gives the following expression of the evaporation flow, based on heat balance and mass transfer equations: DOI: 10.3303/CET1648009 Please cite this article as: Mazzarotta B., Bubbico R., 2016, Predicting evaporation rates from pools, Chemical Engineering Transactions, 48, 49-54 DOI:10.3303/CET1648009 49 ( ) ps ipsv m TR MTP kE \u22c5 \u22c5 \u22c5= (1) where E is the evaporation rate (kg/m2\u00b7s), km the mass transfer coefficient (m/s), Pv the vapour pressure of the chemical (Pa),", "mime": "application/pdf"}, {"id": "cet-3295", "words": "3558", "extension": ".pdf", "flesch": "45", "author": "Salaun, Nicolas; Hanssen Arve, Gr\u00f8nsund; Nilsen Per, Erik", "title": "Risk-based Structural Response against Explosion Blast Loads: Systematic One-to-one CFD (FLACS) / NLFEA (Impetus Afea solver) Coupling to Derive Quantified Response Exceedance", "date": "2016", "keywords": "explosion; figure; flacs; gexcon; impetus; loads; response; risk; safety; wall", "summary": "Probabilistic analysis of gas explosion loads. For the risk owner, it improves the comprehension and implications upon the relation between explosion loads and their consequences on structures carrying critical safety functions.", "mime": "application/pdf"}, {"id": "cet-3296", "words": "3568", "extension": ".pdf", "flesch": "51", "author": "Batt, Rachel; Gant, Simon; Lacome, Jean-Marc; Truchot, Benjamin", "title": "Modelling of Stably-Stratified Atmospheric Boundary Layers with Commercial CFD Software for Use in Risk Assessment", "date": "2016", "keywords": "a&m; abl; boundary; cfd; inlet; model; profiles; turbulence; velocity", "summary": "This approach is well-suited to CFD models using the Boussinesq approximation, where buoyancy forces are expressed in terms of a vertical temperature gradient rather than a density gradient. Usually, CFD models require the node within near-wall cell to be placed at a height greater than ks.", "mime": "application/pdf"}, {"id": "cet-3297", "words": "2675", "extension": ".pdf", "flesch": "53", "author": "Boot, Hans", "title": "Developments in Modelling of Thermal Radiation from Pool and Jet Fires", "date": "2016", "keywords": "fire; flame; heat; jet; pool; radiation; surface", "summary": "Martinsen, W.E, Marx,J.D, (1999) \u201cAn improved model for the prediction of radiant heat from fireballs, Proceedings of the international conference and workshop on modelling the consequences of accidental releases of hazardous materials, sept. 28 - Oct. 1 1999, San Francisco, California p.p. 605-621. Rew, P.J., Hulbert, W.G., (1996), \u2018Development of pool fire thermal radiation model\u2019, HSE Contract Research Report no.96. Some fine tuning on pool fires has been done by Rew and Hulbert in the late nineties to divide the flame in a clear and sooty part, and provide some typical -substance dependent- values for SEPclear and SEPsoot.", "mime": "application/pdf"}, {"id": "cet-3298", "words": "3120", "extension": ".pdf", "flesch": "44", "author": "Coldrick, Simon", "title": "Modelling Small-scale Flashing Propane Jets", "date": "2016", "keywords": "cfd; dispersion; flashing; jet; liquid; model; modelling; phase; temperature", "summary": "Introduction In assessing the consequences of a release of a pressure liquefied gas, flashing jet models are often used to provide the input, or source term, for vapour dispersion calculations. A number of flashing jet models have been developed and these range from simple expressions, through integral (whole jet) models to Computational Fluid Dynamics (CFD) simulations.", "mime": "application/pdf"}, {"id": "cet-3299", "words": "3778", "extension": ".pdf", "flesch": "39", "author": "Fayet, Guillaume; Rotureau, Patricia", "title": "QSPR Model for Regulatory Purpose: from Development to Integration into the QSAR Toolbox", "date": "2016", "keywords": "chemical; data; descriptors; models; physico; properties; qsar; qspr; validation", "summary": "In this context, INERIS developed QSPR models for the prediction of hazardous physico-chemical properties of chemical substances like explosibility of nitro compounds, thermal stability of organic peroxides or flammability of amines. These models were developed according to the five validation principles of QSPR models proposed by OECD for regulatory use.", "mime": "application/pdf"}, {"id": "cet-3300", "words": "3425", "extension": ".pdf", "flesch": "48", "author": "von Ramin, Malte; Stolz, Alexander", "title": "Debris Throw Model for Accidental Explosions in a Complex Industrial Environment", "date": "2016", "keywords": "angle; debris; distribution; fragment; launch; masonry; mass; throw; wall", "summary": "The current Eurocode for masonry structures, EN 1996-1-1 (DIN, 2013) indicates a tensile strength of ft = fxk1 = 0.2 kPa for solid brick masonry structures loaded parallel to the joints. The initial launch angle for debris origination from the brick wall is calculated from the rotational angle of the pin-jointed system shown in Figure 1, right, Eq(5): \uf0f7 \uf0f8 \uf0f6 \uf0e7 \uf0e8 \uf0e6\uf03d \uf02d 2/ tan 1 l wu\uf061 (5) Based on previous research on reinforced concrete walls (D\u00f6rr et al., 2002), the angular distribution of masonry debris in horizontal and vertical direction is assumed to follow a Gauss normal distribution.", "mime": "application/pdf"}, {"id": "cet-3301", "words": "3589", "extension": ".pdf", "flesch": "58", "author": "Lauret, Pierre; Perrin, Marcia; Aprin, Laurent; Heymes, Frederic; Forestier, Serge; Slangen, Pierre; Pey, Alexis", "title": "Atmospheric Powder Dispersion in an Urban Area", "date": "2016", "keywords": "ann; concentrations; data; dispersion; mean; model; networks; set; training; values", "summary": "Normalized Mean Square Error reach a value of 1.4 which is under the recommendation of Hanna and Chang (2012) for urban dispersion models. Acceptance criteria for urban dispersion model evaluation.", "mime": "application/pdf"}, {"id": "cet-3302", "words": "2906", "extension": ".pdf", "flesch": "45", "author": "Habib, Abdelkarim; Schalau, Bernd", "title": "Pool Evaporation at Higher Vapour Pressures", "date": "2016", "keywords": "evaporation; mass; model; pressure; temperature; vapour", "summary": "The experimental results also confirmed that the logarithmic formulation of the pressure term always leads to conservative but, at higher vapour pressures, unrealistic high values, whilst the linear formulation underestimates the mass flow for high vapour pressures. As the results of both models can be seen as the upper and lower limit of the mass flows calculated by evaporation models, they are chosen for further investigations.", "mime": "application/pdf"}, {"id": "cet-3303", "words": "2905", "extension": ".pdf", "flesch": "36", "author": "Baumann-Stanzer, Kathrin; Trini Castelli, Silvia; Leitl, Bernd; Skomorowski, Paul; Polreich, Erwin; Carny, Peter", "title": "Atmospheric Transport Models for Hazardous Releases: Variability and Uncertainties \u2013 Findings of COST Action ES1006 and Operational Experiences", "date": "2016", "keywords": "cost; emergency; model; modelling; releases; response; results; type", "summary": "Which variability in model results can be expected in emergency cases depending on the atmospheric transport model used? This is exemplified and discussed based on a model comparison study using the model systems TAMOS, RODOS and ESTE: comparisons of model results based on the same meteorological forecasts under various weather conditions and for different release scenarios.", "mime": "application/pdf"}, {"id": "cet-3403", "words": "3452", "extension": ".htm", "flesch": "36", "author": "Tanasini, Pietro; Widmer, Gregory; Raballand, Romain", "title": "Crosslinking and Decomposition of Epoxy Resins Induced by Contamination with Water \u2013 Assessment of an Industrial Scale Scenario", "date": "2016", "keywords": "conditions; contamination; decomposition; epoxy; heat; reaction; resin; water", "summary": "Ultimately, decomposition reactions can be initiated, depending on the type of resin, if the self-heating brings the mass to a sufficient temperature. 1. Introduction 1.1 Undesired reactions initiated by water contamination Under certain conditions, epoxy resin are prone to be hydrolysed, causing the conversion of the epoxy ring into a glycol (Lee and Neville, 1967).", "mime": "application/pdf"}, {"id": "cet-3404", "words": "3369", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-3404", "date": null, "keywords": "accidents; chemical; investigation; learning; lessons; need; process; report; safety", "summary": "These may include: \u2022 Dissemination within the company - to other sites, other operating units, to other functions such as process design or maintenance and repair \u2022 Dissemination according to legal requirements - regulations such as the respective national implementation of the Seveso Directives require that major accidents are reported to the relevant 710 authorities, which then report these incidents to the eMARS database (https://emars.jrc.ec.europa.eu/) . http://www.icheme.org/lpb/ o ProcessNet - publishes anonymised process safety incident reports, below the threshold of major accidents, but useful for learning in an online database, free access, available in English and German.", "mime": "application/pdf"}, {"id": "cet-3405", "words": "3542", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-3405", "date": null, "keywords": "board; chemical; dust; equipment; explosion; fire; hazard; investigation; safety; workers", "summary": "People caught in dust explosions are often either burned by the intense heat within the burning dust cloud, injured by flying objects or falling structures. At that time, all the conditions for dust explosion were present; with the addition of dispersion and confinement.", "mime": "application/pdf"}, {"id": "cet-3406", "words": "4137", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-3406", "date": null, "keywords": "1st; explosion; kaixuan; leak; pipeline; pressure; road; trench; vapour", "summary": "On 22:20, a small explosion in the manhole of storm water trench occurred about 1 km away from the initial leak scene. Figure 6: Schematic diagram of storm water trench, the pipeline, and the spread of the leak propylene.", "mime": "application/pdf"}, {"id": "cet-3407", "words": "2789", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-3407", "date": null, "keywords": "accidents; bhopal; distribution; events; fatalities; proportion", "summary": "1. Industrial accident information sources The compilation of major industrial accidents by Mihailidou et al. (2012) has been utilised in this analysis as well as the United Nations Environment Program (UNEP) definition of major industrial accident. min min 1( ) x p x x x \u03b1 \u03b1 \u2212 \uf0e6 \uf0f6\u2212= \uf0e7 \uf0f7 \uf0e8 \uf0f8 (1) Integrating elementally, the following cumulative distribution function is obtained: 1 min ( ) x P x x \u03b1\u2212 \uf0e6 \uf0f6 = \uf0e7 \uf0f7 \uf0e8 \uf0f8 (2) 3. Industrial accident distribution analysis Following the inevitable (but minimal) mathematics, we can proceed to the real data.", "mime": "application/pdf"}, {"id": "cet-3408", "words": "3909", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-3408", "date": null, "keywords": "accidents; ageing; chemical; degradation; equipment; keywords; knowledge; loss; obsolescence; safety", "summary": "The results are reported as follows: Material degradation It was already known from past ageing studies that the keywords associated with mechanical degradation can be used easily to filter an accident database for ageing accidents. Meanwhile, current practice in accident analysis does not sufficiently recognise age-related management of change and design failures (e.g., design exceedances) as ageing issues that should be highlighted along with material degradation.", "mime": "application/pdf"}, {"id": "cet-3409", "words": "3548", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-3409", "date": null, "keywords": "chemical; csb; dust; explosion; gas; incident; iron; management; process; refinery; safety", "summary": "Amyotte P.R., Goraya A.U., Hendershot D.C., Khan, F.I., 2007, Incorporation of inherent safety principles in process safety management, Process Safety Progress, 26, 333-346. With respect to ease of recognition, process incident warning signs can be weak or strong in addition to their physical (e.g., asset integrity) or conceptual (e.g., safety culture) nature.", "mime": "application/pdf"}, {"id": "cet-3410", "words": "2735", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-3410", "date": null, "keywords": "content; fraction; process; salt; silo", "summary": "Though the chemical composition of ASN obtained from the changed drying process (spray process) remained unchanged (AN/AS ratio of 50:50), the physical properties differed from ASN obtained in the original drying process (drying screw). Table 1: Results of the explosion tests of Chemisch-Technische Reichsanstalt Berlin Parameter Influence of Parameter on sensitivity to detonation impact Influence of spray process on parameter Particle Size Increased by smaller particle size Particle Size is smaller Density Increased by lower density Density is lower Strength of Confine- ment Increased with increasing strength of con- finement No influence Brisance of booster charge Increased with increasing strength of booster charge No influence (the same cartridges were used as before the process change)", "mime": "application/pdf"}, {"id": "cet-3411", "words": "3746", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-3411", "date": null, "keywords": "accident; analysis; event; infor.mo; management; process; safety; seveso; system", "summary": "5. Results 5.1 Aspect related to major accident analysis The application of the RCA has identified as the most likely cause of the accident trigger in the contact of two incompatible substances. The report shows that health and safety Regulations have a point of view defined person-centric, as it is based on protection of worker, while major accident control DOI: 10.3303/CET1648126 Please cite this article as: Vallerotonda M., Pirone A., De Santis D., Vallerotonda R., Bragatto P., 2016, Seveso accident analysis and safety management system: a case study, Chemical Engineering Transactions, 48, 751-756 DOI:10.3303/CET1648126 751 Regulations is plant-centric, as it is based on all plants including unit of work, process and every components and devices.", "mime": "application/pdf"}, {"id": "cet-3412", "words": "4253", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-3412", "date": null, "keywords": "chevron; htha; inspection; integrity; process; programmes; rbi; report; review; risk; safety", "summary": "Also in both cases the failure to change to inherently safer design alternatives was critical, with the reliance on the process safety and mechanical integrity programmes not providing a sufficient safety barrier. RBI is designed to ensure continuing safe operation and validate asset integrity programmes.", "mime": "application/pdf"}, {"id": "cet-3413", "words": "2166", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-3413", "date": null, "keywords": "amine; decomposition; dichloromethane; pressure; temperature", "summary": "Due to its low boiling point of 39.7 \u00b0C it can be used for the extraction of amine compounds. However, caution is advised while handling and storing amine compounds diluted in dichloromethane, since there were incidents with unexpected reactions between amine compounds and dichloromethane in the past (Bretherick\u2019s Handbook of Reactive Chemical Hazards, 2007).", "mime": "application/pdf"}, {"id": "cet-3414", "words": "2331", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-3414", "date": null, "keywords": "analysis; basf; cause; incident; rca; root", "summary": "Microsoft Word - 025.docx CHEMICAL ENGINEERING TRANSACTIONS VOL. 48, 2016 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Eddy de Rademaeker, Peter Schmelzer Copyright \u00a9 2016, AIDIC Servizi S.r.l., ISBN 978-88-95608-39-6; ISSN 2283-9216 Root Cause Analysis \u2013 the Central Instrument in a Larger Orchestra Thomas Hill BASF SE, Occupational Safety \u2013 Global Concepts and Training, GUS/AS \u2013 M940, Carl-Bosch-Str. 38, 67056 Ludwigshafen, Germany thomas.hill@basf.com Within BASF there is a large variety of tools connected to learning from accidents or incidents like incident investigation, root cause analysis, databases, short notice communication, detailed communication about severe incidents or accumulation of similar incidents and so for. An evaluation \u2013 applied to LTIs (lost time injuries) - shows that there is room for improvement with respect to root cause analysis: In some cases the root cause analysis is not done or documented at all and in other cases the focus is only on \u201cpersonal performance\u201d but other root causes could and should also have been addressed but were missing.", "mime": "application/pdf"}, {"id": "cet-3415", "words": "3696", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-3415", "date": null, "keywords": "bop; deepwater; engineering; horizon; oil; response; riser; solutions; states; united", "summary": "Nevertheless, they were obliged to develop engineering solutions to the problem. 3.2 Research angle and limitations Here we present a shortened version of our work on engineering solutions.", "mime": "application/pdf"}, {"id": "cet-3581", "words": "3799", "extension": ".pdf", "flesch": "51", "author": "Spinelle, L.; Gerboles, M.; Aleixandre, M.; Bonavitacola, F.", "title": "Evaluation of Metal Oxides Sensors for the Monitoring of O3 in Ambient Air at Ppb Level", "date": "2016", "keywords": "air; calibration; effect; humidity; ppb; response; sensors; temperature; time", "summary": "The experiments showed that generally O3 sensors do not suffer from gaseous interference from NO2, NO, CO, CO2 and NH3, Moreover, the matrix effect experiment showed that there is likely other unknown interfering compounds that affect the SENSE 3000 and NanoEnvi sensors since they showed biases according to the complementary gas used for dilution (either filtered, indoor or outdoor air). Additionally, the presence of hysteresis in sensor responses when changing O3 concentration levels, temperature or humidity was studied.", "mime": "application/pdf"}, {"id": "cet-3582", "words": "2288", "extension": ".pdf", "flesch": "48", "author": "Domingues, R.; Arias, R.; Vera, L.; Villatoro, C.; Ceballos, V.", "title": "Sensory Analysis of the Foot Deodorisation Efficiency of a Commercial Product", "date": "2016", "keywords": "feet; foot; hours; intensity; odour; product", "summary": "The previously reported statistical differences in odour intensity between paired feet (right versus left) in baseline (T0: no treatment) and deodorization assays (T1: treated foot versus untreated foot) have also been represented in a box plot (Figure 3). Feet odour intensity was assessed by a calibrated and trained olfactory panel after 24 hours and 48 hours of continuously wearing the same socks.", "mime": "application/pdf"}, {"id": "cet-3583", "words": "3592", "extension": ".pdf", "flesch": "47", "author": "Barczak, R.; Kulig, A.", "title": "Odour Monitoring of a Municipal Wastewater Treatment Plant in Poland by Field Olfactometry", "date": "2016", "keywords": "cod; impact; measurements; odour; receptor; sludge; treatment", "summary": "At the mechanical-biological municipal wastewater treatment plant, located in Poland in Mazovia Voivodeship, and its surroundings odour measurements using the field olfactometry method were conducted. However, the Nasal Ranger field olfactometer range has not been evaluated in interlaboratory comparison studies yet, and the accuracy and reproducibility of odour measurements by this devices are unknown at this moment and should be subject of future studies.", "mime": "application/pdf"}, {"id": "cet-3584", "words": "3564", "extension": ".pdf", "flesch": "46", "author": "Blanco-Rodriguez, A.; Campo, F.; Morales, O.; Valiente, R.; Lambert, B.; Becher\u00e1n, L.; Garcia-Ramirez, A.", "title": "Development of an Electronic Nose to Identify and Classify Odours from Spirits Beverages", "date": "2016", "keywords": "analysis; beverages; data; figure; nose; odorants; samples; sensors; slope; som; transient", "summary": "MLP is a powerful and relative simple method for data pattern analysis, with high capacity to interpolation and also it allows to establish complex and non-linear patterns. The results of this study support the potential of e-noses as reliable electronic instruments for qualitative analyses of odorants from different alcoholic beverages.", "mime": "application/pdf"}, {"id": "cet-3585", "words": "3060", "extension": ".pdf", "flesch": "41", "author": "Franceschi, D.; Cavalet, E.; Boatto, V.; Conte, G.; Bravi, M.", "title": "Artificial Diagnosis of Sensory Taints Due to Brettanomyces spp. Contamination in Valpolicella Wines", "date": "2016", "keywords": "analysis; chemical; data; figure; gas; nose; sample; sensor; time; wine", "summary": "Figure 4: Time evolution of individual electronic nose sensor detection of untainted wine (VTQ), synthetically tainted wine (VTQ+STD) and naturally tainted wine (VC) of sensor 1 and 3. Table 1: Matrix of p-values of individual electronic nose sensor detections of untainted wine (VTQ), synthetically tainted wine (VTQ+STD) and naturally tainted wine (VC) of sensors 1 to 8 after 0, 1 and 2 days from the opening of the wine bottle. (B) View of the electronic nose sparkling wine sample assaying setup showing: 1. the E-nose; 2.", "mime": "application/pdf"}, {"id": "cet-3586", "words": "3880", "extension": ".pdf", "flesch": "69", "author": "Fakandu, B.; Mbam, C.; Andrews, G.; Phylaktou, H.", "title": "Gas Explosion Venting: External Explosion Turbulent Flame Speeds that Control the Overpressure", "date": "2016", "keywords": "explosion; flame; overpressure; peak; pressure; vent; venting; vessel", "summary": "Laminar Flame Venting Theory Most theories of venting assume that flow through the vent dominates the overpressure and that Pfv is the dominant overpressure [Cates and Samuels, 1991; Bauwens et al., 2010; Bradley and Mitcheson, 1978] and it will be shown in this section that NFPA 68 [2013] has adopted this approach to gas explosion vent design. In low flame speed explosions these pressure transducers had identical pressure time characteristics.", "mime": "application/pdf"}, {"id": "cet-3587", "words": "3321", "extension": ".pdf", "flesch": "54", "author": "Skrinsky, J.; Veres, J.; Peer, V.; Friedel, P.; Travnickova, J.; Dalecka, A.", "title": "Explosion Parameters of Coke Oven Gas in 1 m3 Explosion Chamber", "date": "2016", "keywords": "air; bar; chamber; coke; explosion; gas; maximum; pressure; vol.%", "summary": "The maximum pressure rise rate, dP/dTmax, during gas explosions in enclosures and the deflagration index, Kst, are important explosion characteristics of premixture. 3.2 Deflagration index and maximum rate of pressure rise The maximum pressure rise rate during gas explosions in enclosures, (dP/dt)max, and the deflagration index, KG, are important explosion characteristics of premixture.", "mime": "application/pdf"}, {"id": "cet-3588", "words": "2783", "extension": ".pdf", "flesch": "47", "author": "Isemin, R.; Klimov, D.; Mikhalev, A.; Milovanov, O.; Muratova, N.; Zaichenko, V.", "title": "Fluidized Bed Straw Pellets Combustion with Minimal Emissions of Carbon Monoxide", "date": "2016", "keywords": "air; bed; entry; exchange; heat; profile; velocity", "summary": "Liu D.Y., Chen X.P., Liang C., Zhao C.S., 2009, Solids mixing in the bottom zone of fluidized bed, Proceedings on 20th International conference on fluidized bed combustion, X'ian, China, 459-463. The type of air entry distribution is essential in the formation of hydrodynamic structures of fluidized bed.", "mime": "application/pdf"}, {"id": "cet-3589", "words": "3294", "extension": ".pdf", "flesch": "54", "author": "Russo, L.; Russo, P.; Siettos, C.", "title": "Reducing Wildland Fire Hazard Exploiting Complex Network Theory: a Case Study Analysis", "date": "2016", "keywords": "breaks; fire; forest; fuel; network; russo; vegetation; wildland", "summary": "For illustration purposes we apply the proposed strategy to a real case of wildland fire. During the wildland fire that swept through Victoria, Australia in 2009, caused the death of 173 people (2009 Victorian Bushfires Royal Commission, 2010), while wildland fires in Greece in 2007 fires resulted in 84 dead (Rosenfeld, 2011).", "mime": "application/pdf"}, {"id": "cet-3590", "words": "3967", "extension": ".pdf", "flesch": "55", "author": "Dusso, A.; Grimaz, S.; Salzano, E.", "title": "Rapid Estimation of the Heat Release Rate of Combustible Items", "date": "2016", "keywords": "burning; fire; fuel; growth; heat; hrr; items; materials; method; rate; release; workstation", "summary": "The fire consequences such as the hot gas layer temperature and rate of descent of the smoke layer, the likelihood of flashover and the ignition of other items placed near to the burning one can be calculated based on heat release rate from the fire. Heat release rates of burning items in fires.", "mime": "application/pdf"}, {"id": "cet-3591", "words": "4765", "extension": ".pdf", "flesch": "70", "author": "Saeed, M.; Slatter, D.M.; Andrews, G.; Phylaktou, H.; Gibbs, B.", "title": "The Burning Velocity of Pulverised Biomass: the Influence of Particle Size", "date": "2016", "keywords": "andrews; biomass; dust; explosion; flame; gas; phylaktou; standard", "summary": "[Satter et al., 2012, 2014] and for dust explosions it was influenced by the initial ball of hot chemical ignitor products. 33 5. Results A feature of dust explosions in the ISO 1 m3 equipment, that is rarely commented in the literature, is that about half of the powder injected remains on the floor of the vessel at the end of the test", "mime": "application/pdf"}, {"id": "cet-3592", "words": "3975", "extension": ".pdf", "flesch": "52", "author": "Dusso, A.; Grimaz, S.; Salzano, E.", "title": "Quick Assessment of the Hot Gas Layer Temperature and Potential Fire Spread between Combustible Items in a Confined Space", "date": "2016", "keywords": "correlation; fds; fire; gas; heat; layer; radiation; results; source; temperature", "summary": "On the other hand, thermal radiation from a fire source can be considered as the primary cause of fire spread in pre-flashover conditions, when there is not direct flame impingement and outside the plume, where convective heat transfer is not a principal factor in fire heat transfer. Both the hot gas layer temperature and the thermal radiation to a target can be assessed by using either analytical equations or fire simulation models.", "mime": "application/pdf"}, {"id": "cet-3593", "words": "2716", "extension": ".pdf", "flesch": "45", "author": "Veres, J.; Skrinsky, J.; Travnickova, J.; Dalecka, A.; Sevcikova, S.", "title": "Autoignition Temperature of 1-Pentanol and its Binary Mixtures with Water", "date": "2016", "keywords": "ait; autoignition; figure; pentanol; temperature", "summary": "listopadu 15/2172, 708 33 Ostrava - Poruba jan.veres@vsb.cz The principal application of autoignition temperature (AIT) is to define the maximum acceptable surface temperature in a particular area, usually for electrical classification purpose. Autoignition temperature (AIT) is defined as the lowest temperature at which a substance will produce hot-flame ignition in air at atmospheric pressure without the aid of an external energy source such as a spark or flame.", "mime": "application/pdf"}, {"id": "cet-3594", "words": "2586", "extension": ".pdf", "flesch": "51", "author": "Sakhmetova, G.; Brener, A.; Satayev, M.; Korabayeva, K.", "title": "On the Mesoscopic Model of Mass Transfer in Microporous Membranes", "date": "2016", "keywords": "membrane", "summary": "Lam R., Vlachos D. G., Katsoulakis M. A. Homogenization of mesoscopic theories: Effective properties of model membranes //AIChE journal. \u2013 2002. \u2013 \u0422. 48. \u2013 \u2116. In that case the first-order solution can be obtained on the base of special methods (Horntrop et al., 2001) as following ( ) \uf0f7 \uf0f8 \uf0f6 \uf0e7 \uf0e8 \uf0e6 \uf0f7\uf0f7 \uf0f8 \uf0f6 \uf0e7\uf0e7 \uf0e8 \uf0e6 \u2212= \uf0e5 \u221e = h xi h tDitM h c i", "mime": "application/pdf"}, {"id": "cet-3595", "words": "3326", "extension": ".pdf", "flesch": "55", "author": "Balintova, M.; Demcak, S.; Singovszka, E.; Pagacova, B.", "title": "Study of Inorganic Pollution Sorption from Acidic Solutions by Natural Sorbents", "date": "2016", "keywords": "concentration; metals; mg.l-1; removal; sawdust; solutions; sorption; wood", "summary": "Poplar sawdust had efficiency of metal cations removal from aquatic model solutions approximately of 80.0 %. Table 3 presents the efficiency of metal cations removal from these solutions.", "mime": "application/pdf"}, {"id": "cet-3596", "words": "2870", "extension": ".pdf", "flesch": "61", "author": "Heymes, F.; Aprin, L.; Slangen, P.; Lauret, P.; Lapebie, E.; Osmont, A.", "title": "An Experimental Study on Vapor Cloud Explosion of Propane-Oxygen Stoichiometric Mixture", "date": "2016", "keywords": "blast; cloud; energy; explosion; explosive; mixture; oxygen; pressure; test", "summary": "Vapor cloud explosions involving gaseous fuel and pure oxygen may happen from the growing tendency towards the use of fuel\u2013oxygen mixture as energy source (Hendershot et al., 2010) and since the chemical industry uses vast amounts of oxygen every year in a variety of chemical synthesis reactions. These factors depend on the rapidity of the combustion: blast waves overpressures associated with detonations are of the order of 15 atmospheres, whereas the corresponding values for deflagrations are typically two orders of magnitude less (100 mbar) (Lee, 1980).", "mime": "application/pdf"}, {"id": "cet-3597", "words": "3442", "extension": ".pdf", "flesch": "46", "author": "Bubbico, R.; Dusserre, G.; Mazzarotta, B.", "title": "Calculation of the Flame Size from Burning Liquid Pools", "date": "2016", "keywords": "burning; fire; flame; heat; models; pool; rate", "summary": "Raj P.K., 2007, Large hydrocarbon fuel pool fires: Physical characteristics and thermal emission variations with height, Journal of Hazardous Materials, 140, 280-292. Mudan K. S., 1984, Thermal radiation hazards from hydrocarbon pool fires, Progress in energy and combustion science, 10, 59-80.", "mime": "application/pdf"}, {"id": "cet-3598", "words": "3082", "extension": ".pdf", "flesch": "60", "author": "Lauret, P.; Heymes, F.; Slangen, P.; Aprin, L.; Lecysyn, N.", "title": "Consequences of Liquid Jet Breakup Resulting from Interaction with Overpressure Wave from Domino Effect", "date": "2016", "keywords": "breakup; droplets; flow; fragmentation; liquid; number; shockwave; velocity", "summary": "Consequently, we cannot assume a stationary flow when dealing with droplets fragmentation induced by a shockwave. Lecysyn et al. (2009) note that liquid ejection leads to catastrophic droplets fragmentation with velocity thirty times less than impact velocity.", "mime": "application/pdf"}, {"id": "cet-3599", "words": "3214", "extension": ".pdf", "flesch": "47", "author": "Zuliani, C.; De Lorenzi, C.; Ditali, S.", "title": "Application of CFD Simulation to Safety Problems \u2013 Challenges and Experience Including a Comparative Analysis of Hot Plume Dispersion from a Ground Flare", "date": "2016", "keywords": "case; flacs; flare; fluent; plume; temperature; wind", "summary": "1. Introduction LNG facilities often include large ground flares for the safe disposal of large quantities of process gases in the rare event of emergency situations and/or plant depressurization. Inst 24, 163\u2013187 Ponchaut N. F., Kytoomaa H. et al., 2012, Modelling of ground flare pits, 12th Spring meeting & 8th global congress on process safety Pandya H., 2014, Consider factors affecting onshore LNG plant design, Gas processing <www.gasprocessingnews.com/features/201404/consider-factors-affecting-onshore-lng-plant- design.aspx> accessed 26.02.2016 Richards P.J., Hoxey R.P., 1993, Journal of Wind Engineering and Industrial Aerodynamics 46-47, Appropriate Boundary Conditions for Computational Wind Engineering Models Using the k-\u03b5 Turbulence Model 84", "mime": "application/pdf"}, {"id": "cet-3600", "words": "3837", "extension": ".pdf", "flesch": "44", "author": "Copelli, S.; Croci, S.; Fumagalli, A.; Derudi, M.; Rota, R.; Barozzi, M.", "title": "Runaway Problems in Unsteady State Tubular Reactors", "date": "2016", "keywords": "boundary; conditions; inlet; model; pressure; reactor; runaway; state", "summary": "Throughout the scientific literature, the thermal behavior of these reactors have been always characterized referring to steady state operating conditions neglecting axial diffusivities (some models took into account radial diffusivities). The aim of this work has been to compare runaway boundaries obtained for steady state conventional operations of PFRs with that obtained under unsteady state operating conditions considering axial diffusivities.", "mime": "application/pdf"}, {"id": "cet-3601", "words": "3202", "extension": ".pdf", "flesch": "24", "author": "Rehak, D.; Novotny, P.", "title": "Bases for Modelling the Impacts of the Critical Infrastructure Failure", "date": "2016", "keywords": "failure; impacts; infrastructure; resilience; system", "summary": "1. Introduction Predicting and modelling the impacts of disruption or failure of critical infrastructure is an important part of the research of critical infrastructure resilience. Preference risk assessment of critical infrastructure is also an important starting point for modelling the impacts of critical infrastructure failure as its results determine vulnerabilities enabling the spread of impacts throughout the infrastructure system.", "mime": "application/pdf"}, {"id": "cet-3602", "words": "2799", "extension": ".pdf", "flesch": "37", "author": "Vianello, C.; Zanini, M.A.; Pellegrino, C.; Maschio, G.", "title": "Probabilistic Fault Tree Analysis of Refinery Plant Components subject to Earthquake Scenarios", "date": "2016", "keywords": "analysis; failure; hazard; probability; release; tree; values", "summary": "Subsequently, for each ith simulation, a PGAi,x value was sampled, and for each kth scenario it was used for define release probability values Pi,RSj (PGAi,x). Release probability values derived in the ith simulation from the electro-mechanical initiator events branch and earthquake occurrence branch are thus processed according to the fault tree diagram (taking into account logical operators AND, OR) to derive a final set of aggregate release probability values for RS1, RS2 and RS3.", "mime": "application/pdf"}, {"id": "cet-3603", "words": "4009", "extension": ".pdf", "flesch": "31", "author": "Villa, V.; Reniers, G.L.L.; Cozzani, V.", "title": "Application of Cost-Benefit Analysis for the Selection of Process-Industry Related Security Measures", "date": "2016", "keywords": "analysis; assessment; benefit; benefit analysis; cost; process; security; \u2208 \ufffd; \ufffd \ufffd", "summary": "Garcia, M.L., 2007, The Design and Evaluation of Physical Protection Systems, Second Edition, Elsevier Butterworth-Heinemann, Burlington, Massachusetts, USA. Gavious, A., Mizrahi, S., Shani, Y., Minchuk, Y., 2009, The costs of industrial accidents for the organization: Developing methods and tools for evaluation and cost-benefit analysis of investment in safety, Journal of Loss Prevention in the Process Industries, 22, 434-438, DOI: 10.1016/j.jlp.2009.02.008 HSE, 2015, Internal guidance on cost benefit analysis (CBA) in support of safety-related investment decisions <www.orr.gov.uk> accessed 10.03.2016 Le Guernigou, Y., Revilla, F., 2015, Criminal intent seen in petrochemical fire on French Bastille Day <www.uk.reuters.com> accessed 10.03.2016 Paltrinieri, N., Bonvicini, S., Spadoni, G., Cozzani, V., 2012, Cost-Benefit Analysis of Passive Fire Protections in Road LPG Transportation, Risk Analysis, 32, 200-219, DOI: 10.1111/j.1539-6924.2011.01654.x Reniers, G.L.L., 2014, Safety and Security Decisions in times of Economic Crisis\u202f: Establishing a Competitive Advantage, Chemical Engineering Transactions, 36, 1-6, DOI: 10.3303/CET1436001 Reniers, G.L.L., Brijs, T., 2014a, An Overview of Cost-benefit Models/Tools for Investigating Occupational Accidents, Chemical Engineering Transactions, 36, 43-48, DOI: 10.3303/CET1436008 Reniers, G.L.L., Brijs, T., 2014b, Major accident management in the process industry: In this paper, the role of the fundamental terms of cost-benefit analysis within the specific framework of process-industry security is discussed, focusing on the estimation of the threat probability, the assessment of physical security systems costs and performances and the evaluation of the costs of the losses derived from either perspective or retrospective accidental scenarios.", "mime": "application/pdf"}, {"id": "cet-3604", "words": "4068", "extension": ".pdf", "flesch": "36", "author": "Contini, S.; Contini, P.M.; Torretta, V.; Sala Cattaneo, C.; Raboni, M.; Copelli, S.", "title": "Comparison of Classical and \u201cCause Consequence Diagrams\u201d Recursive Operability Analysis: the T2 Laboratories Accident", "date": "2016", "keywords": "accident; analysis; ccd; fault; plant; process; reactor; risk; roa", "summary": "Khan F. I., Abbasi S. A., 2001, Risk analysis of a typical chemical industry using ORA procedure, Journal of Loss Prevention in the Process Industries 14, 43-59. However, if the classical ROA is compared with its new version, ROA-CCD has been found much faster to be carried out, also requiring a less number of records (8 for ROA-CCD and 16 for classical ROA).", "mime": "application/pdf"}, {"id": "cet-3605", "words": "2440", "extension": ".pdf", "flesch": "37", "author": "Marucco, D.", "title": "Simultaneous Operations Risk Assessment", "date": "2016", "keywords": "activities; assessment; commissioning; construction; process; risk; simops; site", "summary": "Thanks to SIMOPS risk assessment process, together with daily implementation of \u201csafety first\u201d program, the project finally reached 65 mil worked manhours without LTI (Lost-Time Injury), a remarkable achievement in this field. 3.1 SIMOPS Assessment Study Workshop The SIMOPS assessment study workshop is the initiator event of SIMOPS risk assessment process, the key moment to share necessary information and to proper coordinate the involved parties.", "mime": "application/pdf"}, {"id": "cet-3606", "words": "3311", "extension": ".pdf", "flesch": "50", "author": "Singovszka, E.; Balintova, M.", "title": "Assessment of Ecological Risk of Sediment in Rivers of Eastern Slovakia", "date": "2016", "keywords": "assessment; contamination; creek; metals; risk; river; sediment; slovak; slovakia", "summary": "Specific objective of this study is to assess the level of heavy metal concentrations in the sediment, its spatial distribution and compare it with the USEPA quality guideline, to select different pollution indices of the assessment of heavy metal contamination and to assess the ecological risk resulting from sediment contamination. The aim of this study is to assess the sediment quality in the 22 sampling sites in east of Slovakia using potential ecological risk index for four kind of heavy metals concentrations in the samples taken from different locations of this interest area.", "mime": "application/pdf"}, {"id": "cet-3607", "words": "4055", "extension": ".pdf", "flesch": "47", "author": "Botti, L.; Bragatto, P.; Duraccio, V.; Gnoni, M.G.; Mora, C.", "title": "Adopting IOT Technologies to Control Risks in Confined Space: a Multi-criteria Decision Tool", "date": "2016", "keywords": "analysis; criteria; iot; level; risk; space; system; technologies; workers", "summary": "After a first legislative overview and a literature review on the topic, the authors conceptualize an AHP (Analytical Hierarchy process) model for analysing how critical factors affecting dangerous scenarios in confined spaces could affect the assessment of an IOT based device for preventing and managing confined spaces risks. Analyzing confined space risks at process industries Several industrial sectors face the risk of confined space work, i.e. confined areas characterize different processes in many industries, such as chemical industry (e.g. reaction vessels), food processing (e.g. above- ground storage silos) and utility sector (e.g. sewers and pipelines).", "mime": "application/pdf"}, {"id": "cet-3608", "words": "3694", "extension": ".pdf", "flesch": "34", "author": "Argenti, F.; Landucci, G.", "title": "Advanced Attractiveness Assessment of Process Facilities with respect to Malevolent External Attacks", "date": "2016", "keywords": "assessment; attacks; attractiveness; chemical; facilities; index; installation; process; security; table", "summary": "Moreover, the integration of this type of evaluation with aspects related to the social, economic and political contest is not yet available and would be beneficial for a more structured evaluation of process facilities attractiveness. Figure 1, depicting an increase in the estimated level of attractiveness for Installation B and Installation C, shows the improved capability of capturing socio-political aspects, as well as ideological and strategic incentives to an attack, which play a significant role in determining industrial facilities attractiveness as targets.", "mime": "application/pdf"}, {"id": "cet-3609", "words": "1822", "extension": ".pdf", "flesch": "53", "author": "Ivanova, O.; Ivanov, M.", "title": "1-D Mathematical Modelling of Flood Wave Propagation", "date": "2016", "keywords": "areas; discharge; figure; flood; reservoir; river; water", "summary": "Introduction There are several types of floods, such as coastal floods due to earthquakes, river floods due to seasonal rainfalls, floods due to dam breaches and flash floods resulted from sudden intense rainfall. As we mentioned before, seasonal flood flows are the most common prerequisites of floods.", "mime": "application/pdf"}, {"id": "cet-3610", "words": "3450", "extension": ".pdf", "flesch": "49", "author": "Rad, A.; Rashtchian, D.", "title": "A Risk-based MILP Approach for Optimal Placement of Flammable Gas Detectors", "date": "2016", "keywords": "data; detection; detectors; dispersion; gas; release; risk; scenario; set", "summary": "It provides heuristic criteria for risk volume DOI: 10.3303/CET1653025 Please cite this article as: Rad A., Rashtchian D., 2016, A risk-based milp approach for optimal placement of flammable gas detectors, Chemical Engineering Transactions, 53, 145-150 DOI: 10.3303/CET1653025 145 definition and spacing of detectors. Optimization: problem formulation The risk based MILP formulation for optimal placement of flammable gas detectors is given by: min f = ( , ) ,\u2200 \u2208\u2200 \u2208 (4) Subject to: \u2200 \u2264 (5) ,\u2200 \u2208 = 1, \u2200 \u2208 (6 , \u2264 , \u2200 \u2208 , \u2208 (7) \u2208 {0,1} (8) 0 \u2264 , \u2264 1 (9) The formulation is an extension of Legg's work (Legg,2012) called SP formulation.", "mime": "application/pdf"}, {"id": "cet-3611", "words": "3638", "extension": ".pdf", "flesch": "30", "author": "Villa, V.; Cozzani, V.", "title": "Application of Bayesian Networks to Quantitative Assessment of Safety Barriers\u2019 Performance in the Prevention of Major Accidents", "date": "2016", "keywords": "barriers; bayesian; event; performance; probability; safety; safety barriers; \ufffd \ufffd", "summary": "In the Bayesian approach, safety barriers performance has been assessed by means of specific gates, depending on barriers states and classification. De Dianous V., Fi\u00e9vez C., 2006, ARAMIS project: A more explicit demonstration of risk control through the use of bow-tie diagrams and the evaluation of safety barrier performance, Journal of Hazardous Materials, 130, 220-233, DOI: 10.1016/j.jhazmat.2005.07.010 Jensen F.V., Nielsen T.D., 2007, Bayesian Networks and Decision Graphs, Second edition, Springer, New York, USA.", "mime": "application/pdf"}, {"id": "cet-3612", "words": "3342", "extension": ".pdf", "flesch": "56", "author": "Ghaffari, M.; Van Wingerden, K.; Gjovag Hagen, J.T.; Skjold, T.; Storvik, I.", "title": "Sensitivity Analysis of Dust Explosion Consequences in a Roller Mill using FLACS-DustEx", "date": "2016", "keywords": "coal; coal feeder; dust; feeder; mill; mill room; pressure; room", "summary": "Roller mill The experiments described by van Wingerden et al. (2011) were performed in a Loesche LM 18 roller mill consisting of a mill chamber, a classifier and \u201ca top\u201d with coal feeder pipe and coal dust pipes. After a 90\u00ba bend, each of these outlets end up in two pipes of smaller diameter (coal dust pipes with diameter d = 384 mm).", "mime": "application/pdf"}, {"id": "cet-3613", "words": "2622", "extension": ".pdf", "flesch": "43", "author": "Zanini, M.A.; Vianello, C.; Faleschini, F.; Hofer, L.; Maschio, G.", "title": "A Framework for Probabilistic Seismic Risk Assessment of NG Distribution Networks", "date": "2016", "keywords": "assessment; earthquake; event; gas; pipe; pipeline; release; risk; values", "summary": "It is therefore essential to perform seismic risk assessment of NG buried pipelines systems with the aim to identify potential criticalities and avoid significant consequences. For such reasons, this work illustrates the proposal of a probabilistic framework for seismic risk assessment of NG lifelines.", "mime": "application/pdf"}, {"id": "cet-3614", "words": "3876", "extension": ".pdf", "flesch": "40", "author": "Landucci, G.; Paltrinieri, N.", "title": "Dynamic Evaluation of Risk: from Safety Indicators to Proactive Techniques", "date": "2016", "keywords": "assessment; factors; frequency; indicators; methodology; modification; process; risk; safety; year", "summary": "For this purpose, the use of risk indicators based on the continuous learning from events occurring during the lifecycle of the plant and inspection of safety critical elements may allow hazard and risk assessment to assume both dynamic and proactive features. 2. Background on risk indicators 2.1 Classification of indicators Appropriate sets of indicators collected and evaluated on a regular basis can provide information on the overall risk level variation.", "mime": "application/pdf"}, {"id": "cet-3615", "words": "3833", "extension": ".pdf", "flesch": "43", "author": "Ricci, A.; Guglielmi, D.; Mariani, M.G.; Vignoli, M.; Violante, F.S.", "title": "The Improvement of Safety Rules by a Participatory Method. A Case Study in a Chemical Company", "date": "2016", "keywords": "chemical; focus; intervention; motivation; rules; safety; swps; system; work; workers", "summary": "This article, moreover should be used as an example for the implementation of safety intervention in line with the research on safety rules and rules management. Pelagi 9, 40138, Bologna, Italy marcogiovanni.mariani@unibo.it Safety management in high-risk systems is based on safety rules that have to prescribe human action and interaction and should reduce errors and risks.", "mime": "application/pdf"}, {"id": "cet-3616", "words": "4095", "extension": ".pdf", "flesch": "29", "author": "Curcuruto, M.", "title": "Safety Participation in the Workplace: an Assessment Tool of Proactive Safety Orientations by Individuals (PRO-SAFE)", "date": "2016", "keywords": "dimensions; individuals; management; orientation; proactivity; research; role; safety; workplace", "summary": "Within this framework, the construct of proactive safety orientation toward safety emerged as a general and broad set of psychological orientations by individuals in managing safety issues, preventing injuries, improving workplace safety conditions and sustainability of organizational contexts, beyond the mere avoidance of negative events for individuals, teams and organizations. In the light of these conceptual bases, the aim of the present research is to define an original assessment tool of \u201cproactive safety orientation\u201d to assess the psychological factors leading individuals toward a more proactive and participative approach to safety management and risk prevention in the workplace.", "mime": "application/pdf"}, {"id": "cet-3617", "words": "3590", "extension": ".pdf", "flesch": "32", "author": "Ernstsen, J.; Nazir, S.; Roed, B.K.; Manca, D.", "title": "Systemising Performance Indicators in the Assessment of Complex Sociotechnical Systems", "date": "2016", "keywords": "assessment; figure; indicators; individual; performance; performance indicators; system; team", "summary": "The conceptual framework represents four categories of performance indicators identified in the review: team performance indicators that require empirical indicators, team performance indicators that do not require empirical indicators, individual performance indicators that require empirical indicators, and individual performance indicators that do not require empirical indicators, as shown in Figure 2. A systematic understanding of the various categories of performance indicators is likely to increase the accuracy in the overall assessment through a combination of indicators.", "mime": "application/pdf"}, {"id": "cet-3618", "words": "4035", "extension": ".pdf", "flesch": "42", "author": "Manca, D.; Nazir, S.; Komulainen, T.; \u00d8verg\u00e5rd, K.I.", "title": "How Extreme Environments Can Impact the Training of Industrial Operators", "date": "2016", "keywords": "air; conditions; environments; manca; operators; pressure; temperature; training", "summary": "This allows training operators to cope with abnormal, near misses, and real accidents (Manca et al., 2012). This is the case of industrial, maritime, aviation, and space operators.", "mime": "application/pdf"}, {"id": "cet-3619", "words": "3157", "extension": ".pdf", "flesch": "46", "author": "Nakai, A.; Suzuki, K.", "title": "Instructional Information System using AR Technology for Chemical Plants", "date": "2016", "keywords": "chemical; equipment; field; information; operating; operation; operators; system", "summary": "The system can distinguish between operation target equipment and others by image recognition techniques based on the SURF DOI: 10.3303/CET1653034 Please cite this article as: Nakai A., Suzuki K., 2016, Instructional information system using ar technology for chemical plants, Chemical Engineering Transactions, 53, 199-204 DOI: 10.3303/CET1653034 199 (speeded-up robust features) The operation report using the function of instructional information system 203 6.", "mime": "application/pdf"}, {"id": "cet-3620", "words": "3566", "extension": ".pdf", "flesch": "37", "author": "Fontaine, O.; Martinetti, A.; Michaelides Mateou, S.", "title": "Remote Pilot Aircraft System (RPAS): just Culture, Human Factors and Learnt Lessons", "date": "2016", "keywords": "aircraft; aviation; collision; knowledge; level; pilot; risk; rpas; safety; survey", "summary": "In addition, future RPAS pilots, operators and all stakeholders need to achieve an optimum level of knowledge regarding safety issues. A survey to evaluate the background of future RPAS pilots was conducted at the beginning of 2014 and over 1000 responses were obtained.", "mime": "application/pdf"}, {"id": "cet-3621", "words": "3351", "extension": ".pdf", "flesch": "33", "author": "Aleksandrov, A.; Devisilov, V.; Ivanov, M.", "title": "A Role of Education System in Creation of Safety Culture", "date": "2016", "keywords": "culture; education; human; individual; risk; russian; safety; society; system; technical", "summary": "The paper studies the concepts of the basis for safety education, which is formed from synergetic principles and techniques of interdisciplinary training. Concepts of safety education based on synergetic principles and interdisciplinary teaching approaches have been thoroughly researched in a number of papers (Aleksandrov A.A., 2013, Devisilov V.A., 2008, 2010, 2011) and noxological education has been introduced in Russia.", "mime": "application/pdf"}, {"id": "cet-3622", "words": "3591", "extension": ".pdf", "flesch": "41", "author": "Passos, C.; Nazir, S.; Mol, A.C.; Carvalho, P.V.", "title": "Collaborative Virtual Environment for Training Teams in Emergency Situations", "date": "2016", "keywords": "agents; avatars; collaborative; cve; emergency; environment; security; situations; training", "summary": "5. Methodology for the CVE development for security agents training in big events The CVE modeling comprehends characteristics as shape and appearance of objects, ambient lighting, input and output devices mapping and restrictions imposed when inside the simulation. As we intend to perform simulations related to nuclear emergencies, we focus on CNEN agents training using the proposed CVE, despite of firefighters and police officers avatars actions are already implemented and available for the other type of scenarios and users.", "mime": "application/pdf"}, {"id": "cet-3623", "words": "4381", "extension": ".pdf", "flesch": "51", "author": "Ansaldi, S.; Agnello, P.; Bragatto, P.", "title": "Incidents Triggered by Failures of Level Sensors", "date": "2016", "keywords": "accident; distance; failure; incidents; level; misses; safety; search; sensors; systems; tankg", "summary": "Level sensors are available or can be designed using variety of sensing principles. This type of accident is well known in the history of process industries, but, unfortunately, it continues to DOI: 10.3303/CET1653038 Please cite this article as: Ansaldi S., Agnello P., Bragatto P., 2016, Incidents triggered by failures of level sensors, Chemical Engineering Transactions, 53, 223-228 DOI: 10.3303/CET1653038 223 repeat over the years.", "mime": "application/pdf"}, {"id": "cet-3624", "words": "3337", "extension": ".pdf", "flesch": "56", "author": "Russo, L.; Spiliotis, C.; Siettos, C.", "title": "Catastrophic Transitions in a Forest-Grassland Ecosystem", "date": "2016", "keywords": "bifurcation; forest; parameter; solutions; states; system", "summary": "Steady states solutions for 10s = , 6.5k = , 0.18\u03bd = . Conclusions We analysed steady states solutions and multistability in a model of a forest grassland model which considers dynamically the human interactions and their preference based on the rarity perception value.", "mime": "application/pdf"}, {"id": "cet-365", "words": "3566", "extension": ".pdf", "flesch": "50", "author": "Droegemueller, P.; Gough, M.J.", "title": "Values and Benefits of Improving the Performance of Existing Heat Exchangers used in the Hydrocarbon Processing Industries ", "date": "2017", "keywords": "flow; fluid; fouling; heat; hitran; temperature; transfer; tube; wall", "summary": "These revamps are undertaken without modification of pass partitions and can lead to a considerable increase in wall shear force and tube side heat transfer. This is illustrated in a real case study, a BEU 2 pass TEMA type shell and tube heat exchanger (702 tubes, 4m length) with ethylene evaporating on the tube side.", "mime": "application/pdf"}, {"id": "cet-366", "words": "3434", "extension": ".pdf", "flesch": "57", "author": "Parand, R.; Foo, D.C.Y.; Ooi, R.E.H.; Tan, R.R.; Lee, J.-Y.", "title": "Extended Composite Table Algorithm for Optimal Planning of Unconventional Gas Field Development ", "date": "2017", "keywords": "co2; cta; field; flowrate; gas; pinch; sweetening", "summary": "The decision for the amount of CO2 removal from sour gas is made by considering the trade-off between the capital/operating cost of gas sweetening units and adopting gas blending with lower CO2 content from other sources. The blending of sour gas with sweet gas (SG) with lower CO2 content to meet the required specification of sales gas is a common practice in the industry, in order to reduce dependency on gas sweeting units, or to optimize the units with lower design capacities to meet affordability.", "mime": "application/pdf"}, {"id": "cet-367", "words": "3230", "extension": ".pdf", "flesch": "57", "author": "Pitchaimuthu, D.; Lee, J.-Y.; El-Halwagi, M.; Foo, D.C.Y.", "title": "A Superstructure Approach for the Design of Heating Utility System ", "date": "2017", "keywords": "approach; cost; design; heating; medium; oil; system; temperature; utility", "summary": "From Nitrogen system Waste heat recovery unit Heating medium make mp Heating medium pump H e a ti n g m e d iu m s u p p ly h e a d e r H e a ti n g m e d iu m r e tu rn h e a d e r Heating medium dump cooler Sea water supply Sea water return TC LC NNF=Normally No Flow NNF NNF NNF NNF HP Flare Knock-Out Drum Heater Flue gas To ATM Closed Drain Drum Heater Heavy Oil Heater Light Oil Heater Crude Oil Heater Diesel Flushing/ Pigging Heater Test Separator Heater Figure 1: PFD of heating utility system for an offshore platform 3. Due to this, their optimisation model cannot be applied directly for design of heating medium system.", "mime": "application/pdf"}, {"id": "cet-368", "words": "2937", "extension": ".pdf", "flesch": "43", "author": "Boldyryev, S.; Mikulcic, H.; Ulyev, L.; Duic, N.", "title": "Time Super Targeting: Planning of Optimal HEN Design Accounting Energy Prices ", "date": "2017", "keywords": "approach; case; cost; energy; heat; hen; optimum; prices; total", "summary": "The low and upper bound of energy price 1904 were selected taking into account the base case to show the optimum while energy prices going up and down. Third case study was performed for energy price 365 $/kWy and Figure 6 shows that this solution will be stable for wide range of energy prices.", "mime": "application/pdf"}, {"id": "cet-369", "words": "3049", "extension": ".pdf", "flesch": "54", "author": "Soja, J.; Miskolczi, N.", "title": "Recycling of ELV Waste Plastics by One-Stage and a Two- Stage Thermo-Catalytic Pyrolysis ", "date": "2017", "keywords": "catalyst; oil; pyrolysis; reactor; stage; waste; wt%", "summary": "Pyrolysis oil was measured by GC, HPLC or even FTIR. Because of to increase the yields of volatiles and affect the composition of gases and pyrolysis oil, different catalysts were used: H/ZSM-5, Fe(III)/ZSM-5, Ni/ZSM-5 and Cu/ZSM-5.", "mime": "application/pdf"}, {"id": "cet-370", "words": "3758", "extension": ".pdf", "flesch": "42", "author": "Tungatarova, S.A.; Zheksenbaeva, Z.T.; Baizhumanova, T.S.; Grigoriyeva, V.P.; Sarsenova, R.O.", "title": "Heat Generation in the Catalytic Combustion of Light Hydrocarbons ", "date": "2017", "keywords": "al2o3; catalysts; ch4; mnreeaee; oxidation", "summary": "Thus, the study of influence of process parameters on degree of CH4 conversion on the most thermally stable 7.5 % MnREEAEE catalyst supported on 2 % Ce/\u03b8-Al2O3 has shown that contact provides 90 - 92 % oxidation by varying the O2 concentration from 2.0 % to 20.0 %, CH4 - from 0.5 % to 4.0 % at space velocity 10\u00d7103 h-1 at temperature of 973 K. Figure 1: Influence of the concentration of CH4 (a) and O2 (b) on degree of CH4 conversion to CO2 on the MnREEAEE/2 % Ce/\u03b8-Al2O3 at GHSV = 10\u00d7103 h-1 (1 \u2013 973 K, 2 \u2013 923 K, 3 - 873 K 3.3 Oxidation 0.5 % propane-butane in air at GHSV = 10\u00d7103 h-1 on the MnREEAEE and MnREEAEE (0.1 % Pt) catalysts Investigation of the oxidation of 0.5 % C3H8 - C4H10 mixture (C3H8 \u2013 87 %, C4H10 \u2013 13 %) was carried out by varying the temperature and concentration of hydrocarbons and O2 at 10\u00d7103 h-1 on MnREEAEE/2 % Ce/\u03b8- Al2O3 at promotion of catalyst by Pt before and after heating for 25 h in air at 1,373 K. The study of influence of technological parameters of the CH4 and C3H8 - C4H10 combustion on 7.5 % MnREEAEE catalyst supported on 2 % Ce/\u03b8-Al2O3 showed that the catalyst provides 98 \u2013 100 % oxidation at 973 K and O2 concentration variation from 2 to 20 %, CH4 - from 0.2 to 4.0 % at GHSV = 10\u00d7103 h-1.", "mime": "application/pdf"}, {"id": "cet-371", "words": "2721", "extension": ".pdf", "flesch": "47", "author": "Tungatarova, S.A.; Xanthopoulou, G.; Karanasios, K.; Baizhumanova, T.S.; Zhumabek, M.; Kaumenova, G.", "title": "New Composite Materials Prepared by Solution Combustion Synthesis for Catalytic Reforming of Methane ", "date": "2017", "keywords": "al2o3; catalysts; conversion; methane; nio; reaction; shs", "summary": "The interest to SHS catalysts is growing every year and now many countries intensively working with SHS and combustion synthesis catalysts: Russian Federation, USA, Kazakhstan, Japan, Armenia, Greece, Brazil, China, Spain, Korea, India, etc. Very high interest to SHS catalyst can be explained by high activity of catalysts prepared by this methods and advantages of SHS method in comparison with traditional methods of preparation of catalysts.", "mime": "application/pdf"}, {"id": "cet-372", "words": "3197", "extension": ".pdf", "flesch": "53", "author": "Cheng, H.; Hou, F.; Li, C.; Zheng, S.", "title": "Analysis and Equilibrium Constant of Polysulfides in Desulfurization Solution ", "date": "2017", "keywords": "desulfurization; polysulfide; sodium; solution; \uf02d \uf02d", "summary": "200 210 220 230 240 250 260 270 280 290 300 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 A b s Wavelength/nm Na 2 SO 4 NaSCN Na 2 SO 3 Na 2 CO 3 NaHCO 3 PDS Na 2 S 2 O 3 Na 2 S Figure 2: Spectrum of other components in desulfurization solution It can be seen from Figure 2, after 280 nm, the water-soluble components have no effect on the determination of polysulfide. In the next step, the effect of polysulfide concentration and chain length on the amount of secondary salt in the process of oxidative regeneration of desulfurization solution will be studied.", "mime": "application/pdf"}, {"id": "cet-3727", "words": "3307", "extension": ".htm", "flesch": "38", "author": "Palma, V.; Martino, M.; Pisano, D.; Ciambelli, P.", "title": "Catalytic Activities of Bimetallic Catalysts for Low Temperature Water Gas Shift Reaction", "date": "2016", "keywords": "activity; catalysts; cezro4; gas; shift; temperature; water", "summary": "Comparative studies, on the activity of ceria/zirconia supported noble metals catalysts, showed the highest activity of platinum in the temperature range 473-593 K (Radhakrishnan et al., 2006), moreover in our previous studies the role of the support was investigated (Palma et al., 2014, 2015), highlighting the excellent performance of the ceria/zirconia system, however, these systems suffer of serious deactivation, by sintering and coking (Zalc et al., 2002), in real process conditions and a high methane selectivity (Torrente-Murciano et al., 2015). A molybdenum promotion effect was recently reported, for Pt-carbon supported catalysts, increasing the turnover frequency up to a factor of 4000 (Sener et al., 2016); while a comparative study of platinum catalysts supported on M-doped cerium oxide (M = Ca, La, Mg, Zn, Zr, Yb, Y, Gd) have shown a promotion effect on the activity, depending on the nature of the dopant, varying in the order of Yb>Gd>Zr>Mg>La>CeO2(undoped) >Ca>Y>Zn (Panagiotopoulou et al., 2007).", "mime": "application/pdf"}, {"id": "cet-3728", "words": "4536", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-3728", "date": null, "keywords": "cfd; distribution; flow; heat; mesh; modelling; models; pressure; solution; tube", "summary": "1. Introduction Often times it is necessary to optimise various parts of flow distribution systems for better performance and reliability. Challenges of detailed 3D CFD flow distribution modelling In flow distribution systems the inlet stream splits into multiple, often thousands of streams and, consequently, combines back into a single outlet stream.", "mime": "application/pdf"}, {"id": "cet-3729", "words": "2282", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-3729", "date": null, "keywords": "heat; numerical; radiator; surface; temperature; transfer", "summary": "The values of the convective heat transfer coefficient determined from Eq(2) and dimensionless numbers that can be used in Eq(4), determined for the three values of the thermal power are shown in Table 1. 494 Table 1: Experimentally determined values of the dimensionless numbers and heat-transfer coefficient Case 1 2 3 Heat flux at radiator base, q [W/m2] 412.7 989.4 9,386 Grashof number, Gr 27,625 49,619 258,195 Nusselt number, Nu 6.06 7.69 11.27 Heat transfer coefficient, h [W/(m2K)] 4.76 6.04 8.85 2.3 Boundary conditions For the purpose of numerical simulation the following data were used: \uf02d Thermal conductivity of aluminium kAl =180 W/(mK), \uf02d Ambient temperature 295 K, \uf02d Thermal conductivity of air ka=0.0256 W/(mK), \uf02d Heat flux transferred from the base of the radiator for three cases in accordance with Table 1, \uf02d Convective heat transfer coefficients for three cases in accordance with Table 1. 3. In general, the intensity of the convective heat transfer can be expressed by the following equation: q=h(Text - Tamb) (1) where q is the average heat flux lost from the radiator surface, h is the average convective heat transfer coefficient, Text and Tamb denote temperatures of radiator surface and ambient, respectively.", "mime": "application/pdf"}, {"id": "cet-373", "words": "3521", "extension": ".pdf", "flesch": "48", "author": "Cheng, H.; Gao, G.; Zheng, S.", "title": "Waste Water Treatment of Resorcinol Production ", "date": "2017", "keywords": "ammonium; carbon; content; formaldehyde; organics; resorcinol; sulphate; table; water", "summary": "The nitrogen content of ammonium sulphate was determined by formaldehyde method and impurity content of ammonium sulphate was analysed by HPLC. The condensed mole ratio of formaldehyde and organics, neutralized pH value, and the activated carbon adsorption conditions were investigated to achieve the minimum impurities, the qualified nitrogen content, and the best color of ammonium sulphate.", "mime": "application/pdf"}, {"id": "cet-3730", "words": "3439", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-3730", "date": null, "keywords": "biomass; cost; fuel; graph; kraft; processing; products; pulp; residues; wood", "summary": "Figure 4: Feasible structure #1b with cutover residues included for boiler fuel 5. P-graph methodology for biomass processing process synthesis As noted previously there was very little profit differential between solutions in region 1 and all six profitable products were present within this region. Delivered biomass feedstock costs are often highly non-linear due to biomass source quantity and distance from the mill.", "mime": "application/pdf"}, {"id": "cet-3731", "words": "3729", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-3731", "date": null, "keywords": "absorption; charge; droplets; gas; mass; so2; surface; time; transfer; water", "summary": "As regard the effects of electric charge on mass transfer rate, the pertinent literature provided three main indications related to: i) the reduction of droplets surface tension; ii) the occurrence of turbulence phenomena DOI: 10.3303/CET1652085 Please cite this article as: Di Natale F., Carotenuto C., Lancia A., 2016, Enhanced so2 removal by using charged water droplets, Chemical Engineering Transactions, 52, 505-510 DOI:10.3303/CET1652085 505 on the droplets surface and iii) the occurrence of electrostatic interactions between charged droplets and dipoles of gas molecules, as SO2. CHEMICAL ENGINEERING TRANSACTIONS VOL. 52, 2016 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Peng-Yen Liew, Jun-Yow Yong, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Hon Loong Lam Copyright \u00a9 2016, AIDIC Servizi S.r.l., ISBN 978-88-95608-42-6; ISSN 2283-9216 Enhanced SO2Removal by Using Charged Water Droplets Francesco Di Natale*a, Claudia Carotenutob, Amedeo Lanciaa a University of Naples, Department of Chemical, Material and Production Engineering, P.le Tecchio 80, 80125 Napoli, Italy, bThe Second University of Naples, Department of Information and Industrial Engineering, Via Roma 29, 81031, Aversa (CE), Italy francesco.dinatale@unina.it This paper reports preliminary results on the absorption of SO2 from water charged droplets, produced by an electrospray operated in dripping mode.", "mime": "application/pdf"}, {"id": "cet-3732", "words": "4007", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-3732", "date": null, "keywords": "cycle; effectiveness; engine; exchanger; heat; heat exchanger; performance; pressure; shr", "summary": "Towards this direction, the DOI: 10.3303/CET1652086 Please cite this article as: Salpingidou C., Misirlis D., Vlahostergios Z., Donnerhack S., Flourous M., Goulas A., Yakinthos K., 2016, Investigation of the performance of different recuperative cycles for gas turbines/aero engine applications, Chemical Engineering Transactions, 52, 511-516 DOI:10.3303/CET1652086 511 exploitation of waste heat energy in gas turbines by integration of heat exchangers can be of significant value (McDonald, 1990). The conventional integration of heat exchangers (HEXs) in gas turbines is typically performed with the installation of a system of heat exchangers right after the last turbine (low pressure (LPT) or power turbine (PT))", "mime": "application/pdf"}, {"id": "cet-3733", "words": "3029", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-3733", "date": null, "keywords": "aero; cfd; cycle; engine; exchanger; gas; heat; model; pressure", "summary": "The use of heat exchangers in gas turbines for exhaust gas waste heat recovery can strongly contribute in this direction since it can lead to significant improvement of gas turbine performance and reduction of fuel consumption and pollutant emissions. In the last 15 years, various research activities DOI: 10.3303/CET1652087 Please cite this article as: Salpingidou C., Misirlis D., Vlahostergios Z., Flourous M., Donnerhack S., Yakinthos K., 2016, Numerical modeling of heat exchangers in gas turbines using cfd computations and thermodynamic cycle analysis tools, Chemical Engineering Transactions, 52, 517-522 DOI:10.3303/CET1652087 517 targeting the performance optimization of gas turbines with a particular interest in aero engine applications have taken place within the framework of major research projects funded by European Union in close collaboration with the main European aero engine manufacturers, Universities and Research Institutes.", "mime": "application/pdf"}, {"id": "cet-3734", "words": "3258", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-3734", "date": null, "keywords": "fischer; gas; model; product; production; reactor; tropsch; water", "summary": "Converting natural gas to liquid fuels, gas-to-liquid (GTL), is one option in bringing remote natural gas to the market. Conclusions A novel process concept is proposed for converting natural gas to liquid hydrocarbon products.", "mime": "application/pdf"}, {"id": "cet-3735", "words": "2646", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-3735", "date": null, "keywords": "analysis; characteristics; development; method; product; prototype; prototyping; technology", "summary": "In this way, it was analysed product characteristics such as size, precision, surface finish and functionality as well as the rapid prototyping technology characteristics of mechanical strength, material diversity, surface finish, accuracy, the prototype size, the speed of construction, the need for support, the loss of material, the need for post processing and the construction time. Figure 3 illustrates the prioritization of analysed technology and product characteristics.", "mime": "application/pdf"}, {"id": "cet-3736", "words": "4544", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-3736", "date": null, "keywords": "air; capture; co2; fuel; gas; process; reactor; stage; stream", "summary": "3. Results and discussion Mass and energy balances involved in every stage of the proposed process were solved including a complete thermal integration between the solids and gas streams included in Figure 1. Reference H2 production plant with CO2 capture performed by means of methyldiethanolamine (MDEA) chemical absorption is considered in this analysis for purposes of comparison.", "mime": "application/pdf"}, {"id": "cet-3737", "words": "2529", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-3737", "date": null, "keywords": "energy; heat; recovery; site; total; transfer; utility", "summary": "The results of calculation of heat transfer area for Total Site heat recovery and intermediate utilities characteristics are shown in Table 2. 542 Figure 1: Total Site Cost Curves. The heat exchangers network for Total Site heat recovery is consisted of multiple steam boilers, condensers, water heaters and coolers.", "mime": "application/pdf"}, {"id": "cet-3738", "words": "2735", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-3738", "date": null, "keywords": "heat; integration; interplant; plants; sink; streams", "summary": "To make the problem more general, we assume that Pinch problem appears between heat source plant A and one heat sink plant B, while threshold problem appears between heat source plant A and another heat sink plant C. Note that in this paper, each plant is used only as heat source or heat sink, which uses the waste heat source/sink in the individual plants. The first effort about interplant heat integration was introduced by Dhole and Linnhoff (1993) and further elaborated had been done by Hu and Ahmad (1994).", "mime": "application/pdf"}, {"id": "cet-374", "words": "3006", "extension": ".pdf", "flesch": "56", "author": "Tan, X.; Yang, Q.; Li, J.; Bi, R.; Zheng, S.", "title": "On Flow Regime Inside Plain-Orifice Nozzle ", "date": "2017", "keywords": "flip; flow; model; nozzle", "summary": "3.5 Validation of the judgment model Table 3 shows comparisons of measured by literature, calculated by empirical models (FLUENT V6.3 Documentation, 2003) and the new model data, where the case of occurring hydraulic flip is represented as Y and the case of not occurring hydraulic flip is represented as N. References Ahn K., Kim J., Yoon Y., 2006, Effects of orifice internal flow on transverse injection into subsonic crossflows: cavitation and hydraulic flip, Atomization and Sprays, 16, 15-34.", "mime": "application/pdf"}, {"id": "cet-375", "words": "2703", "extension": ".pdf", "flesch": "54", "author": "Bi, R.; Hu, M.; Wang, S.; Tan, X.; Zheng, S.", "title": "Effect of Throat Length on Steam Ejector Critical Back Pressure ", "date": "2017", "keywords": "ejector; fluid; length; pressure; steam; throat", "summary": "Result and discussion 4.1 The effect of ejector throat length to entrainment ratio From the simulation, we can see that with the increase of ejector throat length L2, there is little change of entrainment ratio. 1947 Figure 3: Contours of Mach number under different ejector\u2019s throat length -200 0 200 400 600 800 1000 1200 1400 1600 1800 2000 31 32 33 34 35 36 P C ,m a x/k P a L 2 /mm Figure 4: The critical back pressure under different length of ejector\u2019s throat 4.3 The effect of ejector throat length to the operating flexibility For the optimization of steam ejector, greater operating flexibility should be made on the premise of a par- ticular entrainment ratio.", "mime": "application/pdf"}, {"id": "cet-376", "words": "3408", "extension": ".pdf", "flesch": "51", "author": "Patella, B.; Piazza, S.; Sunseri, C.; Inguanta, R.", "title": "NiO Thin Film for Mercury Detection in Water by Square Wave Anodic Stripping Voltammetry ", "date": "2017", "keywords": "deposition; et al; figure; film; mercury; nio; sensing; stripping; time", "summary": "bernardo.patella@unipa.it NiO thin film thermally grown on Ni was investigated for the first time as an electrochemical sensor of mercury ions in water. Among all the electrochemical methods, SWASV is considered the most powerful analytical technique for detecting heavy metals, owing to DOI: 10.3303/CET1760001 Please cite this article as: Patella B., Piazza S., Sunseri C., Inguanta R., 2017, Nio thin film for mercury detection in water by square wave anodic stripping voltammetry, Chemical Engineering Transactions, 60, 1-6 DOI: 10.3303/CET1760001 1 its high sensitivity (limit of detection less than 10ppb), selectivity (each heavy metal has different stripping potential), and short analysis time.", "mime": "application/pdf"}, {"id": "cet-377", "words": "3038", "extension": ".pdf", "flesch": "52", "author": "Steinmann, W.; Pico, D.", "title": "Polymeric Sensor Fibers Based on a Piezoelectric Polymer and Metal Alloy/Carbon Nanotube/Polymer Composite for Structural Health Monitoring ", "date": "2017", "keywords": "carbon; cnt; draw; fibers; metal; piezoelectric; polymer", "summary": "For fiber based materials, this approach has never been studied before. If the fibers are directly placed into the matrix material (beside the reinforcing fibers), an external contacting is necessary for measuring the electrical signal generated in the fibers, which becomes impossible if carbon fibers are applied as a reinforcing material (Walter et.", "mime": "application/pdf"}, {"id": "cet-378", "words": "3636", "extension": ".pdf", "flesch": "57", "author": "Sarno, M.; Scudieri, C.; Longo, A.; Ciambelli, P.", "title": "Graphene Oxide as a Novel Nanoplatform for Electrochemical Detection of Arsenic (III) ", "date": "2017", "keywords": "arsenic; as3; detection; electrode; et al; fe3o4; figure; rgo", "summary": "These methods require the use of expensive instrumentation and high operating costs for arsenic detection (Story et al., 1992). Although modified electrodes have shown interesting ability toward arsenic detection, they also display many problems related to the immobilization of the mediator, its toxicity and cost.", "mime": "application/pdf"}, {"id": "cet-379", "words": "3072", "extension": ".pdf", "flesch": "48", "author": "Li, Y.; Wei, L.; Du, L.; Zhao, H.; Wang, H.", "title": "A Highly-sensitive Voltammetric Sensor for Scutellarin Based On Poly-taurine Film Modified Electrode ", "date": "2017", "keywords": "electrode; figure; gce; method; mol; scutellarin; taurine", "summary": "For further evaluation of the sensing characteristics, the EIS for bare GCE and poly taurine/GCE were recorded in 5 mM As can be seen from Figure1(b), the semicircles diameter at poly taurine/GCE was smaller than that at bare GCE.", "mime": "application/pdf"}, {"id": "cet-380", "words": "3090", "extension": ".pdf", "flesch": "54", "author": "Marini, D.; Genova, V.; Marra, F.; Pulci, G.; Valente, M.", "title": "Mechanical Behaviour with Temperatures of Aluminum Matrix Composites with CNTs ", "date": "2017", "keywords": "carbon; cnts; composites; doi; fillers; matrix", "summary": "[\u00b0C] Fillers [wt%] E mod [GPa] 25 0 0.5 1 1.5 2 65.5\u00b12.9 68.3\u00b12.3 69.4\u00b10.9 65.9\u00b14.5 48.1\u00b12.1 200 0 0.5 1 1.5 2 59.9\u00b11.9 61.1\u00b12.1 49.8\u00b12.5 51.7\u00b12.4 42.9\u00b10.3 400 0 42.9\u00b10.3 43.6\u00b11.8 44.7\u00b10.9 39.4\u00b14.5 0.5 1 1.5 2 39.5\u00b12.1 29 possible to observe the direct influence of the reinforcement in composites properties. Reference Alam, S. N. and Kumar, L. (2016) \u2018Mechanical properties of aluminium based metal matrix composites reinforced with graphite nanoplatelets\u2019, Materials Science and Engineering A. Elsevier, 667, pp.", "mime": "application/pdf"}, {"id": "cet-381", "words": "3642", "extension": ".pdf", "flesch": "52", "author": "Go, T.; Pico, D.; Steinmann, W.", "title": "Polyether Ether Ketone / Carbon Nanotube Composite Fibres ", "date": "2017", "keywords": "carbon; cnt; concentration; conductivity; ether; fibres; ketone; melt; peek; polymer; properties", "summary": "Furthermore, by using PEEK fibres containing suitable additives, carbon nanotubes (CNT), the aimed conductivity can be achieved and the light weight potential can also be maintained. Figure 4 (right) shows the DSC curves of PEEK fibres with 0 % and 10 % CNT, the shift in the melting temperature is visible.", "mime": "application/pdf"}, {"id": "cet-382", "words": "3241", "extension": ".pdf", "flesch": "50", "author": "Cheng, K.; Chhor, K.; Kanaev, A.", "title": "Elaboration and Enhanced Activity of the Mixed Oxide ZrxTi1-xO2 Nano-photocatalyst ", "date": "2017", "keywords": "activity; nanoparticles; photocatalyst; reactor; tio2; xo2; zrxti1", "summary": "The different from pure TiO2 activity, the composite ZrxTi1-xO2 was strong or less active depending on temperature treatments. For higher x\u22650.3 the orthorhombic ZrxTi1-xO2 phase appeared, which photocatalytic activity with the UVA illumination was negligible.", "mime": "application/pdf"}, {"id": "cet-383", "words": "3241", "extension": ".pdf", "flesch": "48", "author": "Stoller, M.; Vuppala, S.; Matarangolo, M.; Vaiano, V.; Sannino, D.; Chianese, A.; Cianfrini, C.", "title": "About a Novel Production Method for N-Doped Magnetic Nanocore Nanoparticles of Titania by Means of a Spinning Disk Reactor ", "date": "2017", "keywords": "engineering; fe3o4; light; magnetic; nanoparticles; phenol; tio2", "summary": "The use of magnetic core TiO2 nanoparticles offers a solution to this problem. ISBN 978-88-95608- 50-1; ISSN 2283-9216 About a Novel Production Method for N-Doped Magnetic Nanocore Nanoparticles of Titania by Means of a Spinning Disk Reactor Marco Stoller*a, Srikanth Vuppalab, Mariantonietta Matarangoloc, Vincenzo Vaianoc, Diana Sanninoc, Angelo Chianesea, Claudio Cianfrinib a Sapienza University of Rome, Dept. of Chemical Engineering Materials Environment, Via Eudossiana 18, Rome, Italy b Sapienza University of Rome, Dept. of Astronautics Electrical and Energy Engineering,Via Eudossiana 18, Rome, Italy c University of Salerno, Dept. of Industrial Engineering, Via Giovanni Paolo II 132, 84084 Fisciano(SA), Italy marco.stoller@uniroma1.it This study reports a novel approach to produce nitrogen doped magnetic core TiO2 nanoparticles (N- TiO2/FM).", "mime": "application/pdf"}, {"id": "cet-384", "words": "2669", "extension": ".pdf", "flesch": "44", "author": "Insinga, M.G.; Moncada, A.; Oliveri, R.L.; Ganci, F.; Piazza, S.; Sunseri, C.; Inguanta, R.", "title": "Nanostructured Pb Electrode for Innovative Lead-acid Battery ", "date": "2017", "keywords": "acid; battery; charge; discharge; electrode; lead", "summary": "Here, we show that battery with nanostructured Pb electrode works at 1C charge and discharge with very good stability for over 1200 cycles, and discharge efficiency around 90%. Synthesis of Pb nanostructured electrodes was conducted in two steps: deposition of the current collector followed by NWs deposition.", "mime": "application/pdf"}, {"id": "cet-385", "words": "2485", "extension": ".pdf", "flesch": "45", "author": "Maharramov, A.; Ramazanov, M.; Di Palma, L.; Hajiyeva, F.; Shirinova, H.; Hasanova, U.", "title": "Role of Structure of the Pp/Magnetite Nanocomposites on Their Thermal Properties ", "date": "2017", "keywords": "fe3o4; magnetite; nanocomposites; nanoparticles; polymer; polypropylene; properties", "summary": "For use of polymer nanocomposites at a relatively high temperature conditions, their thermal stability is of great importance. Influence of magnetite nanoparticles weight content on the thermal stability of polypropylene Sample Initial decomposition temperature(o\u0421) Half decomposition temperature (o\u0421) Final decomposition temperature (o\u0421) PP 237,0 458,37 475,64 PP +5%Fe3O4 306.4 455.74 477.65 PP +10%Fe3O4 305.83 458.67 480.89 PP +20%Fe3O4 334.24 488.44 495.6 To study the thermal phase transitions of polymeric nanocomposites based on PP and Fe3O4, the differential scanning calorimetry (DSC)measurementswere carried, which allows to define the degree of crystallinity, glass transition temperature, melting and crystallinity temperatures.", "mime": "application/pdf"}, {"id": "cet-386", "words": "2365", "extension": ".pdf", "flesch": "47", "author": "Novruzova, A.; Ramazanov, M.; Chianese, A.; Hajiyeva, F.; Maharramov, A.; Hasanova, U.", "title": "Synthesis Structure and Optical Properties of PP+PbS/CdS Hybrid Nanocomposites ", "date": "2017", "keywords": "cds; figure; nanocomposites; polymer; pp+pbs; properties", "summary": "8 (a), peaks at 511 nm and 560 nm wavelengths belong to CdS nanoparticles. Materials 16(11), 926-929 SinghV.,SharmaP.K., ChouhanP., 2010.Surfactant mediated phase transformation of CdS nanoparticles.", "mime": "application/pdf"}, {"id": "cet-387", "words": "2969", "extension": ".pdf", "flesch": "43", "author": "De Falco, G.; Porta, A.; Del Gaudio, P.; Commodo, M.; Minutolo, P.; D Anna, A.", "title": "Thin Film Coatings Prepared by Direct Thermophoretic Deposition of Flame-Made Nanoparticles ", "date": "2017", "keywords": "biofilm; coatings; deposition; flame; nanoparticles; substrates; tio2", "summary": "69 Figure 2: Raman spectra of P25 coating prepared by solvent evaporation technique and AFS TiO2 coating obtained with a total deposition time of 30 s. Figure 3: UV-Visible absorption spectra of P25 coating prepared by solvent evaporation technique and AFS TiO2 coating obtained with a total deposition time of 30 s. The antimicrobial activity of TiO2 nanoparticle coatings was studied against the fungus Candida Albicans. A preliminary analysis of the antimicrobial activity of TiO2 nanoparticle coatings produced with this method has been performed against Candida Albicans, and compared to that of commercial TiO2 nanopowder.", "mime": "application/pdf"}, {"id": "cet-388", "words": "2629", "extension": ".pdf", "flesch": "48", "author": "Genova, V.; Marini, D.; Valente, M.; Marra, F.; Pulci, G.", "title": "Nanostructured Nickel Film Deposition on Carbon Fibers for Improving Reinforcement-matrix Interface in Metal Matrix Composites ", "date": "2017", "keywords": "carbon; coating; doi; fibers; matrix; nickel; plating; solution; surface", "summary": "However, surface microstructure investigations have allowed to identify the optimized plating parameters in terms of homogeneity of nickel coating: in fact, in the sample obtained with a Pr of 100 mL/g for 10 minutes (Figure 3C), the coating seems to be adherent, continuous and more homogeneous then the other samples. Haag S., Burgard M., Ernst B.,2006, Pure nickel coating on a mesoporous alumina membrane: Preparation by electroless plating and characterization, Surface & Coatings Technology, 201, 2166-2173, DOI: 10.1016/j.surfcoat.2006.03.023 Loto C. A., 2016, Electroless Nickel Plating \u2013 A Review, Silicon, pp.", "mime": "application/pdf"}, {"id": "cet-389", "words": "4927", "extension": ".pdf", "flesch": "47", "author": "Brener, A.; Musabekova, L.; Jamankarayeva, M.A.", "title": "Stochastic Lattice Model of Aggregation in Heterogeneous Polydisperse Media ", "date": "2017", "keywords": "aggregation; case; cell; characteristic; clusters; kinetics; order; particles; time", "summary": "Cluster mobility as a probe for surface characterization, The European Physical Journal D, 52(1-3), 115-118. In contrast to the previous case (DLA), it was now possible to find several non clusters in one cell in different time units Figure 2: Scheme of the algorithm for mixed kinetics aggregation (an example)", "mime": "application/pdf"}, {"id": "cet-390", "words": "3066", "extension": ".pdf", "flesch": "39", "author": "Banis, G.; Kouli, M.E.; Ferraro, A.; Molino, A.; Karatza, D.; Chianese, S.; Musmarra, D.; Hristoforou, E.", "title": "An Innovative Application of Super-Paramagnetic Iron Oxide Nanoparticles for Magnetic Separation ", "date": "2017", "keywords": "chemical; doi; engineering; field; magnetic; nanoparticles; separation; solution; spions; surface", "summary": "Among them, nanoparticles possessing magnetic properties offer great advantages due to a characteristic, named superparamagnetism, that makes magnetic nanoparticles attractive for biomedical applications because the risk of forming agglomerates is very low in the absence of magnetic fields. Magnetic nanoparticles are synthesized from a variety of metallic atoms combined eventually with oxygen including iron oxides, such as Fe3O4 and \u03b3-Fe2O3 (Adamaki et al., 2016; DOI: 10.3303/CET1760015 Please cite this article as: Banis G., Kouli M.E., Ferraro A., Molino A., Karatza D., Chianese S., Musmarra D., Hristoforou E., 2017, An innovative application of super-paramagnetic iron oxide nanoparticles for magnetic separation, Chemical Engineering Transactions, 60, 85-90 DOI: 10.3303/CET1760015 85 Metaxa et al., 2016), spinel-type ferromagnets such as MgFe2O4, MnFe2O4, and CoFe2O4, alloys such as CoPt3 and FePt as well as pure metals such as Fe and Co.", "mime": "application/pdf"}, {"id": "cet-3902", "words": "2694", "extension": ".pdf", "flesch": "40", "author": "Huang, Y.H.", "title": "Remote Environmental Monitoring Embedded System Design Based on Wireless Sensor Networks", "date": "2016", "keywords": "applications; data; monitoring; networks; nodes; sensor; system; wireless", "summary": "Wireless sensor networks and traditional wireless networks (such as WLAN and cellular mobile telephone network) has a different design goals, which is highly mobile in the environment by optimizing the utilization of routing and resource management strategies to DOI: 10.3303/CET1651038 Please cite this article as: Huang Y.H., 2016, Remote environmental monitoring embedded system design based on wireless sensor networks, Chemical Engineering Transactions, 51, 223-228 DOI:10.3303/CET1651038 223 maximize the bandwidth to provide users with a certain quality of service assurance in a wireless sensor network, in addition to a few nodes need to be moved outside, most of the nodes are static, because they usually run on poor people inaccessible and even dangerous, remote environment, energy cannot be replaced, effective design strategy to extend the life cycle of a core network of wireless sensor networks (Somov and Xu, 2014). For application of wireless sensor networks based on data provided by a plurality of sensor network applications will be shared; (2) Things applications may be simultaneously designed with concurrency, it may be the turn with concurrency.", "mime": "application/pdf"}, {"id": "cet-3903", "words": "3506", "extension": ".pdf", "flesch": "44", "author": "Liu, X.F.; Liu, X.C.", "title": "Research on the Low Energy Consumption Building Design Based on GUD", "date": "2016", "keywords": "building; coefficient; consumption; design; energy; energy consumption; heat; heating; system; temperature", "summary": "This paper aims at laying a foundation for the promotion and application of the design DOI: 10.3303/CET1651039 Please cite this article as: Liu X.F., Liu X.C., 2016, Research on the low energy consumption building design based on gud, Chemical Engineering Transactions, 51, 229-234 DOI:10.3303/CET1651039 229 patterns of low energy buildings Integrated with GUD System; and meanwhile, the concept of integrated design provides a new thought for low energy building design. Calculation and design analysis of low energy consumption building At present, the scale of residential building construction is unprecedented in the histories of china and world.", "mime": "application/pdf"}, {"id": "cet-3904", "words": "3046", "extension": ".pdf", "flesch": "31", "author": "Zhan, N.Y.; Wang, J.H.; Lu, H.J.; Liu, Y.D.", "title": "Description of Jilin Province Public Building Energy Efficiency Index Evaluation System", "date": "2016", "keywords": "building; efficiency; energy; evaluation; indicators; public; qualitative; score; system", "summary": "According to scholars established public building energy efficiency evaluation system, and referred to the domestic latest norms and standards existing relevant cold area public building energy efficiency class: Green Building Evaluation Standard (GB / T 50378-2014)( MOHURD, 2014), Cold and Cold Region Public Building Energy Efficiency Design Standards (JGJ26-2010)( MOHURD, 2010), Public Building Energy Efficiency Design Standards (DGJ08-107-2012)( MOHURD, 2012), Public Building Energy Efficiency Testing Standard (JGJ / T177-2009)( MOHURD, 2009), Jilin Public Building Energy Efficiency Design Standards (DB22 / 436-2007)( MOHURD, 2007), Green Building Evaluation System and Its Application in Engineering Practice( Frank T, 2005) Table 4: Jilin province public building energy efficiency rating 5.5 Evaluation system database created Through the establishment of public building energy efficiency evaluation index system, which was developed into the software, set up the database, making it a convenient way for general public building energy efficiency evaluation.", "mime": "application/pdf"}, {"id": "cet-3905", "words": "3200", "extension": ".pdf", "flesch": "37", "author": "Dong, S.W.", "title": "Study on Modification of Novel Magnesium Alloy for Sports Equipment", "date": "2016", "keywords": "alloy; homogenization; magnesium; magnesium alloy; sample; test; treatment", "summary": "As magnesium alloy has the characteristics of low weight, high specific strength, good damping and noise reduction performance and outstanding recovery performance, it has attracted widespread attention and is expected to become the main force of a new generation of materials for the sports equipment (Liu, 2010; Aonuma and Nakata, 2012). On the premise that the existing advantages of the magnesium alloy are guaranteed, how to improve its corrosion resistance has become an important technical issue in the field of magnesium alloy and is also an urgent technical problem to be solved for the magnesium alloy for sports equipment.", "mime": "application/pdf"}, {"id": "cet-3906", "words": "2677", "extension": ".pdf", "flesch": "40", "author": "Wang, X.C.; Xu, L.F.; Wang, J.; Tao, H.H.; Zhang, C.", "title": "MSNs and MWCNTs Topical Application on Immune Toxicity and Physicochemical Properties", "date": "2016", "keywords": "afm; body; group; immune; lymph; mice; nanomaterials; nodes; response; study; term; weight", "summary": "It is fixed at one end of the boom, the interaction between the sample and the tip of the other end of the nanoscale morphology and mechanical pattern detecting nanomaterials sample surface. Electronic balance organs and lymph nodes measuring weight, fixed in 10% formalin solution.", "mime": "application/pdf"}, {"id": "cet-3907", "words": "2860", "extension": ".pdf", "flesch": "42", "author": "Yan, F.; Zhu, S.H.", "title": "Research on System Evaluation and Green Transformation Program Design of Public Building", "date": "2016", "keywords": "analysis; building; decision; design; evaluation; green; objective; program; system; transformation", "summary": "Aiming decision attributes, namely architectural design parameters, green building design phase of evaluation and decision-making is a limited evaluation of the program known choice. Project Evaluation System Requirements government administration, planners, architects, construction units, DOI: 10.3303/CET1651043 Please cite this article as: Yan F., Zhu S.H., 2016, Research on system evaluation and green transformation program design of public building, Chemical Engineering Transactions, 51, 253-258 DOI:10.3303/CET1651043 253 management and operation of the user and other parties to the participants possess concept of sustainable development, and work together to complete the entire construction process.", "mime": "application/pdf"}, {"id": "cet-3908", "words": "3429", "extension": ".pdf", "flesch": "48", "author": "Xu, H.B.", "title": "Research on the Model of Public Project Performance Evaluat ion-A Case Study of Water Environment Project", "date": "2016", "keywords": "environment; evaluation; improvement; performance; project; urban; water", "summary": "With this fact as a starting point, this paper probes into the method for urban water environment improvement project performance evaluation. The polar triangle whitening weight function-based grey evaluation method and D-S evidence theory are combined for rational, comprehensive and systematic evaluation of urban water environment improvement project by borrowing the domestic and foreign experience in urban water environment improvement project performance evaluation and making use of the more objective selection of extreme point by polar triangle whitening weight function based on the objective, function and characteristics of urban water environment improvement project performance evaluation on the basis of the predecessors' research findings regarding the method for combining grey theory and D-S evidence theory.", "mime": "application/pdf"}, {"id": "cet-3909", "words": "2612", "extension": ".pdf", "flesch": "29", "author": "Feng, G.P.", "title": "Simulation and Experimental Research of Cyclohexane Isopropyl Alcohol Azeotropic Solvent Separation During Chemical and Pharmaceutical Process", "date": "2016", "keywords": "chemical; column; composition; cyclohexane; distillation; liquid; phase; process; reflux; separation", "summary": "This article will use dynamic simulation of distillation processes to separate these two processes in line, especially in heterogeneous batch azeotropic distillation and batch extractive distillation, distillation is an attempt to design and method of open up. This article will use dynamic simulation of distillation processes to separate these two processes were in line, especially in 269 heterogeneous batch azeotropic distillation and batch extractive distillation, distillation is an attempt to design and method of open up.", "mime": "application/pdf"}, {"id": "cet-391", "words": "2091", "extension": ".pdf", "flesch": "52", "author": "Pico, D.; Meyer, E.; Luking, A.; Milow, B.; Gries, T.", "title": "SILICA-AERO. Production of Lightweight Silica Aerogel Fibers for Excellent Heat Insulating Application ", "date": "2017", "keywords": "aerogel; drying; fiber; figure; process; silica; sol", "summary": "Figure 3: Process steps from solution to silica aerogel 92 1.3 Aim of this study While the sol-gel process has already been extensively investigated, the production of silica aerogel fibers is largely unexplored. Aim of this paper is to introduce a new developed process for the production of silica aerogel fibers.", "mime": "application/pdf"}, {"id": "cet-3910", "words": "2583", "extension": ".pdf", "flesch": "54", "author": "Zhao, X.G.; Zhou, Y.; Zhao, J.Y.; Zhan, G.; Yang, P.", "title": "Safety Prediction of Soleplate Corrosion State in Petroleum Storage Tank Based on Grey Theory Model", "date": "2016", "keywords": "corrosion; prediction; soleplate; storage; tank; thickness", "summary": "After recent studies on the corrosion of steel surfaces, a scientific method needs to be promoted to predict the corrosion trend and make further prevention (Bhattacharjee et al., 1993; Wang et al., 2010).Compared with other corrosion prediction models such as neural network (Leifer & Mickalonis, 2000; Kenan, 2003), new hygrothermal model (Marra et al., 2015), time prediction model (Hua et al., 2014) and chemical model (Narimani et al., 2015), the Grey Model GM(1,1) in the Grey Theory, which is programmed by MATLAB, is introduced to the prediction of soleplate corrosion in petroleum storage tank based on the interconnected random corrosion data obtained by measuring (Deng, 1989; 2002; Figure 2: Different types of soleplate corrosion 273 Figure 3: Soleplate corrosion of No.G-2 storage tank The total area of tank bottom is 651.11 m2.", "mime": "application/pdf"}, {"id": "cet-3911", "words": "2947", "extension": ".pdf", "flesch": "36", "author": "Cheng, M.; Yuan, H.B.; Zhang, M.; Cheng, M.", "title": "The Research of Control Method of Greenhouse Based on Global Variable Prediction Model", "date": "2016", "keywords": "control; data; environment; greenhouse; humidity; model; prediction; system; temperature; value", "summary": "The value of greenhouse environment control model as the basis for the prediction model, can control the greenhouse environment is in the best state of crop growth environment, illustrate the effectiveness of the method. Ghoumari M.Y.El., Tantau H.J., and Serrano J., 2005, \u201cNonlinear constrained MPC: real-time implementation of greenhouse air temperature control,\u201d Comput.", "mime": "application/pdf"}, {"id": "cet-3912", "words": "3071", "extension": ".pdf", "flesch": "42", "author": "Hou, Z.K.", "title": "The Effect of Casting Method on Fatigue Property Magnesium Alloy Used in Sports Apparatus", "date": "2016", "keywords": "0.15y; alloy; az91; casting; differential; fatigue; magnesium; magnesium alloy; pressure", "summary": "And the fatigue properties of untrained AZ31 can be DOI: 10.3303/CET1651048 Please cite this article as: Hou Z.K., 2016, The effect of casting method on fatigue property magnesium alloy used in sports apparatus, Chemical Engineering Transactions, 51, 283-288 DOI:10.3303/CET1651048 283 understood. Wrought magnesium alloys can exhibit the higher strength and better plasticity than cast magnesium alloys, and show the more significant potential in further applications of magnesium based materials.", "mime": "application/pdf"}, {"id": "cet-3913", "words": "2422", "extension": ".pdf", "flesch": "43", "author": "Zhuang, Y.; Yan, P.S.", "title": "Study on Hydroxyl Radical Scavenging Ability of Fermented Kelp Waste", "date": "2016", "keywords": "cantharellus; hydroxyl; kelp; scavenging; waste", "summary": "The optimization of the conditions for Cantharellus sp. fermentation shows more growth rate of the solid kelp waste fermentation system, and more potential comprehensive utilization of kelp waste. Results and discussion 3.1 Fermentation of Cantharellus sp. on kelp waste medium As is shown in Figure 1, Cantharellus sp. could grow on the solid medium mainly composed of kelp waste.", "mime": "application/pdf"}, {"id": "cet-3914", "words": "3833", "extension": ".pdf", "flesch": "43", "author": "Wang, Y.J.; Yin, Z.X.; Yan, H.J.; Fan, S.J.; Shi, J.L.; Zhou, M.J.", "title": "Determination and Evaluation of Affecting Factors of Raw Material Cost Based on Rough Set Theory", "date": "2016", "keywords": "attribute; cost; decision; factors; furnace; material; set; steel; steelmaking; table", "summary": "This paper proposes a method to evaluate the importance of each factor affecting raw material cost. This method can be applied to quantitative analysis of factors that affect raw material cost in steelmaking.", "mime": "application/pdf"}, {"id": "cet-3915", "words": "3101", "extension": ".pdf", "flesch": "26", "author": "Li, Y.; Zhang, Y.X.; Li, S.M.; Wu, J.M.; Ding, Y.P.; Zhang, R.Z.", "title": "Microscopic Mechanism of Tin-Cobalt Alloy Negative Material During Li-Absorption", "date": "2016", "keywords": "alloy; atoms; band; cosn; doi; energy; figure; lithium; materials; tin", "summary": "Figure 2b shows that 302 https://www.engineeringvillage.com/search/submit.url?CID=quickSearchCitationFormat&origin=results&category=authorsearch&searchtype=Quick&searchWord1=%7bGrazzini,+Giuseppe%7d&section1=AU&database=1&yearselect=yearrange&sort=yr Li8Co3Sn3 alloy exhibits stronger ionic than the other models with embedding lithium atoms. As well as the distinction of band structure of all alloys systems doped lithium atoms was discussed in comparison with CoSn alloy model.", "mime": "application/pdf"}, {"id": "cet-3916", "words": "3731", "extension": ".pdf", "flesch": "61", "author": "Zhang, C.; Yao, J.; Zhu, C.Y.; Zhu, M.J.; Sun, J.J.", "title": "Soil Heavy Metal Contamination and Microbial Ecological Risk Assessment - A Case Study", "date": "2016", "keywords": "activity; china; concentrations; contamination; metal; mining; pollution; samples; soil; yinshan", "summary": "In recent years, the pollution in Yinshan mine attracted increasing attention (Yin et al., 2008), but no study has examined soil heavy metal pollutions in different functional areas of the Yinshan Lead/Zinc Mine. After soil samples were digested with concentrated nitric acid, Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) was used to determine heavy metals concentrations (Cd, Cr, Zn, Mn, Pb and Ni).", "mime": "application/pdf"}, {"id": "cet-3917", "words": "2978", "extension": ".pdf", "flesch": "39", "author": "Xiong, Y.; Zhou, J.; He, Q.Q.", "title": "Oxidation Kinetics of Biodiesel Stabilized with Pyrogallol Using the PetroOXY Method", "date": "2016", "keywords": "antioxidant; biodiesel; induction; oxidation; period; pyrogallol", "summary": "Fattah I.M.R., Masjuki H.H., Kalam M.A., Hazrat M.A., Masum B.M., Imtenan S., 2014, Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks. Dinkov R.K., Stratiev D.S., Shishkova I.K., Ivanov S.K., Tsaneva T.T., Mitkova M., 2015, Assessment of shelf life of Bulgarian industrial FAME by the use of modified ASTM D2274 as accelerated oxidation method.", "mime": "application/pdf"}, {"id": "cet-3918", "words": "3128", "extension": ".pdf", "flesch": "53", "author": "Lei, J.H.; Tian, X.Y.", "title": "Application of an Improved Ant Colony Algorithm in Routing of Wireless Sensor Networks", "date": "2016", "keywords": "algorithm; ant; energy; network; node; routing; sensor; wireless", "summary": "Architecture and basic knowledge of Wireless Sensor Networks 2.1 Architecture of Wireless Sensor Networks Wireless sensor network is composed of sensor nodes, sink node and management node. As shown in figure 1, a large number of sensor nodes are randomly distributed inside or near the monitoring area, and the nodes form the network by self-organizing.", "mime": "application/pdf"}, {"id": "cet-3919", "words": "3396", "extension": ".pdf", "flesch": "33", "author": "Li, J.H.", "title": "Proof of Lagrange Mean Value Theorem and its Application in Text Design", "date": "2016", "keywords": "function; lagrange mean; mean value; rolle; rolle theorem; theorem; value; value theorem", "summary": "This paper first analyzes the objectives, tasks, methods, and then focuses on the teaching strategies and processes, Finally, it comes to the reflection, thus forming a complete, detailed and full text design on the proof of Lagrange mean value theorem and its application. The differential mean value theorem includes Rolle theorem, Lagrange mean value theorem, Cauchy mean value theorem and Taylor mean value theorem.", "mime": "application/pdf"}, {"id": "cet-392", "words": "3162", "extension": ".pdf", "flesch": "51", "author": "Foo, M.L.; Tan, K.W.; Wu, T.Y.; Chan, E.S.; Chew, I.", "title": "A Characteristic Study of Nanocrystalline Cellulose and its Potential in Forming Pickering Emulsion ", "date": "2017", "keywords": "acid; cellulose; chemical; efb; emulsion; hydrolysis; ncc; particles; pickering; size", "summary": "(Sain and Panthapulakkal, 2006; Sun et al., 2005) 1633 1636 -OH bending of the absorbed water (Mandal and Chakrabarty, 2011) 1504 - aromatic C=C vibration from the aromatic ring of lignin (Sun et al., 2005) 1420 1418 C-H2 bending (Jonoobi et al., 2009) 1366 1364 Bending vibration of C-H and C-O bonds in the polysaccharide aromatic rings. Jonoobi M., Harun J., Mishra M. and Oksman K., 2009, Chemical composition, crystallinity and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofiber, BioResources 4, 626-639. Kalashnikova I., Bizot H., Bertoncini P., Cathala B. and Capron I., 2013, Cellulosic nanorods of various aspect ratios for oil in water Pickering emulsions, Soft Matter 9, 952-959.", "mime": "application/pdf"}, {"id": "cet-3920", "words": "3370", "extension": ".pdf", "flesch": "42", "author": "Li, X.G.; Bai, X.C.; Yuan, Q.; Zhang, S.A.", "title": "Application of Load-pull in Power Amplifier Design", "date": "2016", "keywords": "amplifier; circuit; design; efficiency; load; matching; method; momentum; output; power; power amplifier; simulation", "summary": "The simulation results showed that the new method could get the optimal output within three iterations, which verified that the new method is a practical and efficient in power amplifier design. Experimental results and analysis In power amplifier design, the load-pull test error introduced into the system, the circuit board processing error, plus LDMOS power transistor manufacturers produced each transistor there will be differences, could cause actual results and simulation difference can be significant.", "mime": "application/pdf"}, {"id": "cet-3921", "words": "3006", "extension": ".pdf", "flesch": "57", "author": "Liu, J.F.; Wang, Q.M.", "title": "Application of an Improved SVM Algorithm for Wireless Sensor Networks in the Prediction of Air Pollution", "date": "2016", "keywords": "air; algorithm; data; pm2.5; prediction; sensor; wireless", "summary": "This paper selects various air quality monitoring sensors, such as semiconductor air quality sensor (TGS2600/TGS260), dust sensor, carbon monoxide sensor (CO-BF), electrochemical sulphur dioxide sensor (SO2-A), and electrochemical NO2 gas sensor (NO2-A1) etc.. 2. Wireless sensor node is responsible for information collection and pre-treatment, and is generally composed of the sensor unit, processing unit, wireless transceiver unit and power management unit.", "mime": "application/pdf"}, {"id": "cet-3922", "words": "3258", "extension": ".pdf", "flesch": "23", "author": "Li, Z.J.", "title": "Research on the Strategies Analysis and the Mode of the Enterprise Accounting Informatization Based on Big Data", "date": "2016", "keywords": "accounting; accounting informatization; data; development; enterprise; enterprise accounting; informatization; support", "summary": "In addition, mining and management of enterprise accounting informatization data needs to be conducted and the database of core data needs to be established to acquire richer enterprise development accounting information and achieve the effective management and application of mass data. Moreover, this paper also analyzes the application advantages of enterprise accounting informatization mode under the support of big data combining enterprise accounting informatization and real situation.", "mime": "application/pdf"}, {"id": "cet-3923", "words": "2873", "extension": ".pdf", "flesch": "70", "author": "Tao, J.", "title": "Research on the Supply Chain Risk Prediction Based on the Improved Intelligent Algorithm", "date": "2016", "keywords": "algorithm; chain; pso; risk; supply; supply chain", "summary": "DOI: 10.3303/CET1651059 Please cite this article as: Tao J., 2016, Research on the supply chain risk prediction based on the improved intelligent algorithm, Chemical Engineering Transactions, 51, 349-354 DOI:10.3303/CET1651059 349 Table 1: Supply chain risk classification The first level index The second level index The third level index Supply chain risk Supply chain structure risk The number of nodes in supply chain The structure of the supply chain Supply chain quantity Supply chain enterprises Information risk Information transfer risk bullwhip effect Information security risk Information fluctuation risk Supply chain operation risk Manufacturer operational risk Supplier operational risk Retailer operational risk Cooperation risk Partner selection risk Trust risk Logistics risk Inventory risk The risk of transportation Distribution of risk Other risks Legal risk Market risk Natural factors The development prospects of the industry risk 3. The occurrence of supply chain risk always brings a huge loss to the whole supply chain.", "mime": "application/pdf"}, {"id": "cet-3924", "words": "2981", "extension": ".pdf", "flesch": "66", "author": "Chang, X.; Li, B.X.", "title": "Power Load Forecasting based on the Parallel Chaos Algorithm", "date": "2016", "keywords": "algorithm; chaos; forecasting; load; power; prediction", "summary": "References Akhmet M., Akhmetova Z., Fen M.O., 2014, Chaos in economic models with exogenous shocks, Journal of Economic Behavior & Organization, 106: 95-108, DOI: 10.1016/j.jebo.2014.06.008 El-Shorbagy M.A., Mousa A.A., Nasr S.M., 2016, A chaos-based evolutionary algorithm for general nonlinear programming problems, Chaos, Solitons & Fractals, 2016, 85: 8-21, DOI: 10.1016/j.chaos.2016.01.007 Farshidianfar A., Saghafi A., 2014, Identification and control of chaos in nonlinear gear dynamic systems using Melnikov analysis,Physics Letters A, 378: 3457-3463, DOI: 10.1016/j.physleta.2014.09.060 He Y.X., Zhang J.X., Xu Y., Gao Y., Xia T., He H.Y, 2015, Forecasting the urban power load in China based on the risk analysis of land-use change and load density, International Journal of Electrical Power & Energy Systems, 73: 71-79, DOI: 10.1016/j.ijepes.2015.03.018 Li S., Goel L., Wang P., 2016, An ensemble approach for short-term load forecasting by extreme learning machine, Applied Energy, 170: 22-29, DOI: 10.1016/j.apenergy.2016.02.114 Liang H.T., Kang F.J., 2016, Adaptive chaos parallel clonal selection algorithm for objective optimization in WTA application, Optik - International Journal for Light and Electron Optics, 127: 3459-3466, DOI: 10.1016/j.ijleo.2015.12.122 Malyutina E.I., Shiryaev V.I., 2014, Time Series Forecasting Using Nonlinear Dynamic Methods and Identification of Deterministic Chaos, Procedia Computer Science, 31: 1022-1031, DOI: 10.1016/j.procs.2014.05.355 Martinez-Anido C.B., Botor B., Florita A.R., Draxl C., Lu S.Y., Hamann H.F., Hodge B.M., 2016, The value of day-ahead solar power forecasting improvement, Solar Energy, 2016, 129: 192-203, DOI: 10.1016/j.solener.2016.01.049 \u00d6mer F.E., 2016, Forecasting electricity load by a novel recurrent extreme learning machines approach, International Journal of Electrical Power & Energy Systems, 78: 429-435, DOI: 10.1016/j.ijepes.2015.12.006 Panapakidis L.P., 2016, Clustering based day-ahead and hour-ahead bus load forecasting models, International Journal of Electrical Power & Energy Systems, 80: 171-178, DOI: 10.1016/j.ijepes.2016.01.035 Xiao L.Y., Shao W., Liang T.L., Wang C., 2016, combined model based on multiple seasonal patterns and modified firefly algorithm for electrical load forecasting, Applied Energy, 2016, 167: 135-153, DOI: 10.1016/j.apenergy.2016.01.050 360 DOI: 10.3303/CET1651060 Please cite this article as: Chang X., Li B.X., 2016, Power load forecasting based on the parallel chaos algorithm, Chemical Engineering Transactions, 51, 355-360 DOI:10.3303/CET1651060 355 2.", "mime": "application/pdf"}, {"id": "cet-3925", "words": "2021", "extension": ".pdf", "flesch": "52", "author": "Jiang, W.", "title": "OPNET-based WLAN Modeling and its Performance Testing", "date": "2016", "keywords": "figure; network; simulation; time; traffic; wireless; wlan", "summary": "Compared to cable network, wireless network equips with both the mobility of high nodes and the convenience of the network, which makes wireless network more suitable to the network scenarios newly built or of highly movable nodes, such as on-site investigation and on-spot emergency. Choose needed network node models from the object panel, namely the switch, Ethernet server, wireless AP and wireless terminal, and then put them in the prepared setting.", "mime": "application/pdf"}, {"id": "cet-3926", "words": "3568", "extension": ".pdf", "flesch": "58", "author": "Zhao, J.D.", "title": "A Project Cost Forecasting Method Based on Grey System Theory", "date": "2016", "keywords": "cost; grey; model; prediction; project; \uf028 \uf029", "summary": "Due to the system by the noise pollution, so the original data sequence showing a Diasporas, the Diasporas series is also a grey sequence, or gray process, the grey process model has become grey model. In view of the traditional forecasting methods of project cost, there are some limitations and uncertainties.", "mime": "application/pdf"}, {"id": "cet-3927", "words": "2837", "extension": ".pdf", "flesch": "60", "author": "Ren, W.D.; Sun, W.X.", "title": "Application of an Improved Ant Colony Algorithm in TSP Problem Solving", "date": "2016", "keywords": "algorithm; ant; colony; colony algorithm; path; pheromone; uniform", "summary": "7. Conclusions The convergence speed of ant colony algorithm is greatly improved by using the uniform design idea to add uniform discrete process and the reasonable setting of the parameters of ant colony algorithm. Ant colony algorithm 2.1 The principle of ant colony algorithm", "mime": "application/pdf"}, {"id": "cet-3928", "words": "3514", "extension": ".pdf", "flesch": "51", "author": "Wang, G.H.; Jiao, F.L.", "title": "The Multi-dimensional Customer Behavior Analysis Based On Biayes and Fisher Classification Algorithm", "date": "2016", "keywords": "algorithm; analysis; bayesian; classification; data; discriminant; fisher; network; probability; sample", "summary": "The Bayesian classification algorithm, using probability and statistics to classification samples, is one of the earliest methods for dealing with uncertainty by classification. The original data is from some operators in Harbin in Heilongjiang province, and from sample data for the data flow gas package users in March.", "mime": "application/pdf"}, {"id": "cet-3929", "words": "3688", "extension": ".pdf", "flesch": "55", "author": "Li, C.", "title": "The Application of high-dimensional Data Classification by Random Forest based on Hadoop Cloud Computing Platform", "date": "2016", "keywords": "classification; data; decision; forest; hadoop; method; platform; set; tree", "summary": "According to the Hadoop cloud computing platform, the parallelization of Random Forest algorithm has been studied. With the parallelization of Random Forest algorithm on Hadoop platform, the computational effciency and classification accuracy of the proposed algorithm are improved.", "mime": "application/pdf"}, {"id": "cet-393", "words": "3590", "extension": ".pdf", "flesch": "50", "author": "Li, Z.; Chen, Y.; Bi, C.", "title": "Preparation and Properties of Graphene/Nanocopper Reinforced Epoxy Resin Composites ", "date": "2017", "keywords": "composites; content; epoxy; epoxy resin; graphene; properties; resin", "summary": "Finally, the excellent mechanics capability and heat resistance of EP/graphene/Cu composites will add immensely to the development and research of the modification of epoxy resin. On the one hand, because of these excellent performances, epoxy resin has been commonly used as matrix and nanostructured fillers that are suitable to modify the material properties.", "mime": "application/pdf"}, {"id": "cet-3930", "words": "3417", "extension": ".pdf", "flesch": "59", "author": "Hu, H.F.; He, W.N.", "title": "Research on Key Technology of Network Intrusion Detection System Based on Improved GA-BPNN Algorithm", "date": "2016", "keywords": "algorithm; data; detection; intrusion; network; neural; tcp", "summary": "DOI: 10.3303/CET1651066 Please cite this article as: Hu H.F., He W.N., 2016, Research on key technology of network intrusion detection system based on improved ga- bpnn algorithm, Chemical Engineering Transactions, 51, 391-396 DOI:10.3303/CET1651066 391 Chirag N. Modil et al (2012) apply the Bias classifier and Snort based network intrusion detection system to the cloud environment, and achieve very good classification results. The architecture of intrusion detection system as shown in Figure 1.", "mime": "application/pdf"}, {"id": "cet-3931", "words": "2879", "extension": ".pdf", "flesch": "36", "author": "Lei, S.G.; Zhang, L.; Li, W.P.", "title": "The Analysis of Spaceborne SAR Interferometry Based on Strapdown Inertial Navigation Mechanism and Maximum Likelihood Method", "date": "2016", "keywords": "coordinate; cos; data; likelihood; method; navigation; phase; system", "summary": "This paper puts forward a spaceborne SAR interferometry system operates on the strapdown inertial navigation mechanism, which is based on maximum likelihood phase estimation method, and this main research within this paper is: do maximum likelihood phase estimation of real airborne single-pass data quickly and effectively, and with a lower noise level. The navigation coordinate system is the coordinate system using in strapdown inertial navigation system to solve the navigation parameters.", "mime": "application/pdf"}, {"id": "cet-3932", "words": "3496", "extension": ".pdf", "flesch": "58", "author": "Xu, G.W.; Xu, L.N.; Li, X.M.; Qi, W.J.", "title": "The Image Retrieval Method Based on the Homolographic Block Color Histogram", "date": "2016", "keywords": "color; feature; hbch; image; information; method; retrieval; space", "summary": "Before extracting image color feature, the image is segmented in advance, so the space relation is added in certain degree, and color feature has not only the global color information but also the space information. The construction of color space has intuitionistic effect on image color features extraction.", "mime": "application/pdf"}, {"id": "cet-3933", "words": "2568", "extension": ".pdf", "flesch": "71", "author": "Cai, H.Y.", "title": "Quadratically Constrained Quadratic Optimal Problem in Robust Relay Networks", "date": "2016", "keywords": "h h", "summary": "DOI: 10.3303/CET1651069 Please cite this article as: Cai H.Y., 2016, Quadratically constrained quadratic optimal problem in robust relay networks, Chemical Engineering Transactions, 51, 409-414 DOI:10.3303/CET1651069 409 2. Ubaidulla P., Shin H., Win M.Z., 2007, Robust wireless relay networks: slow power allocation with guaranteed GoS [J].", "mime": "application/pdf"}, {"id": "cet-3934", "words": "3132", "extension": ".pdf", "flesch": "41", "author": "Wang, H.H.", "title": "Application Research on Data Mining and Artificial Intelligence Theory in Short-Term Power Load Forecasting", "date": "2016", "keywords": "attribute; data; information; load; network; reduction; set; theory", "summary": "In addition, a clear and simple decision rule should have less antecedent combination, namely the number of produced reduction set condition attributes should be as less as possible. If the attribute set Q=A\uf0c8D, A, D of information system S is condition attribute set and decision attribute set, such information system can also be called decision system (or decision table), V=\uf0c8Vq is the union set Vq of all attributes of q value domain, f is the information function specifying the attribute value of each object, namely: f: U\uf0b4Q\uf0aeV. 2.2 Relative reduction of attribute For attribute set A, D\uf0ceQ , matrix unit element of relative discernibility matrix is: \uf028 \uf029 \uf028 \uf029\uf07b", "mime": "application/pdf"}, {"id": "cet-3935", "words": "2901", "extension": ".pdf", "flesch": "43", "author": "Tang, L.; Song, H.; Chen, M.J.; Chen, Y.M.", "title": "A New Video Super-resolution Reconstruction Algorithm Based on Compressive Sensing", "date": "2016", "keywords": "algorithm; frequency; image; reconstruction; resolution; sensing; signal; wavelet", "summary": "And from the simulation result shown in Figure 5, with the increase of the iterations the PSNR of two kinds of algorithms for image reconstruction tends to be stable, but compared with the CS method, the new algorithm possesses higher result, which shows the better quality of the reconstructed image. In the process of image super resolution reconstruction, the traditional methods to recover the lost high frequency information of the image such as interpolation method will bring the fuzzy edges.", "mime": "application/pdf"}, {"id": "cet-3936", "words": "3250", "extension": ".pdf", "flesch": "35", "author": "Tian, Y.Z.; Yue, H.", "title": "Application Research of BIM Technology in Computer Aided Design of Building Foundation", "date": "2016", "keywords": "bim; building; construction; design; foundation; model; pit; technology", "summary": "Example of applying BIM technology in foundation pit design 4.1 Project review The project of Changsha Zhongqing Square Center is located in Changsha Peace Avenue. In addition, the models and information will be used in the full DOI: 10.3303/CET1651072 Please cite this article as: Tian Y.Z., Yue H., 2016, Application research of bim technology in computer aided design of building foundation, Chemical Engineering Transactions, 51, 427-432 DOI:10.3303/CET1651072 427 building life cycle which includes construction engineering design, construction management, operation management, etc (Adamu et al., 2015).", "mime": "application/pdf"}, {"id": "cet-3937", "words": "2650", "extension": ".pdf", "flesch": "46", "author": "Zhou, Z.A.; Xu, K.; Wu, D.Y.", "title": "Design of Agricultural Internet of Things Monitoring System Based on ZigBee", "date": "2016", "keywords": "coordinator; data; end; network; sensor; system; wireless; zigbee", "summary": "The development of wireless sensor networks was motivated by military applications such as battlefield surveillance; today such networks are used in many industrial, agricultural and consumer applications, such as industrial process monitoring and control, machine health monitoring, agricultural greenhouse monitoring and so on. Proposed monitoring system design The agricultural monitoring system with wireless sensor networks is deployed at agricultural site and developed for agriculture monitoring.", "mime": "application/pdf"}, {"id": "cet-3938", "words": "2545", "extension": ".pdf", "flesch": "23", "author": "Ma, Z.Y.", "title": "The Design of Hybrid Active Power Filter based on Harmonics Detection and Its Simulation Research", "date": "2016", "keywords": "compensation; current; filter; harmonic; power; power filter; voltage", "summary": "The hybrid active power filter, which combines active power filter, passive power filter and generalized integrators, and which has their both respective merits, leading the development of electric reliability and quality. Minimum current principle of harmonic compensation The hybrid active filter consists of active power filter (APF), passive power filter, three-phase PWM voltage inverter (pulse width modulation) and coupling transformer.", "mime": "application/pdf"}, {"id": "cet-3939", "words": "2858", "extension": ".pdf", "flesch": "53", "author": "Wang, Y.; Hao, H.X.", "title": "Research on the Supply Chain risk Assessment of the Fresh Agricultural Products based on the Improved TOPTSIS Algorithm", "date": "2016", "keywords": "chain; index; method; products; risk; supply", "summary": "References Atallah S.S., G\u00f3mez M.I., Bj\u00f6rkman T., 2014, Localization effects for a fresh vegetable product supply chain: Broccoli in the eastern United States, Food Policy, 49, 151-159, DOI: 10.1016/j.foodpol.2014.07.005 Chen W.C., Li J., Jin X.J., 2016, The replenishment policy of agri-products with stochastic demand in integrated agricultural supply chains, Expert Systems with Applications, 48, 55-66, DOI: 10.1016/j.eswa.2015.11.017 Ge H.T., Gray R., Nolan J., 2015, Agricultural supply chain optimization and complexity: A comparison of analytic vs simulated solutions and policies, International Journal of Production Economics, 159, 208-220, DOI: 10.1016/j.ijpe.2014.09.023 Jacxsens L., Luning P.A., van der Vorst J.G.A.J., Devlieghere F., Leemans R., Uyttendaele M., 2010, Simulation modelling and risk assessment as tools to identify the impact of climate change on 449 microbiological food safety \u2013 The case study of fresh produce supply chain, Food Research International, 43, 1925-1935, DOI: 10.1016/j.foodres.2009.07.009 Jayakumar D.N., Venkatesh P., 2014, Glowworm swarm optimization algorithm with topsis for solving multiple objective environmental economic dispatch problem, Applied Soft Computing, 23, 375-386, DOI: 10.1016/j.asoc.2014.06.049 Krohling R.A., Lourenzutti R., Campos M., 2015, Ranking and comparing evolutionary algorithms with Hellinger-TOPSIS, Applied Soft Computing, 37, 217-226, DOI: 10.1016/j.asoc.2015.08.012 Lima F.R. Jr., Osiro L., Carpinetti L.C.R., A comparison between Fuzzy AHP and Fuzzy TOPSIS methods to supplier selection, Applied Soft Computing, 21, 194-209, DOI: 10.1016/j.asoc.2014.03.014 Lourenzutti R., Krohling R.A., 2016, A generalized TOPSIS method for group decision making with heterogeneous information in a dynamic environment, Information Sciences, 330, 1-18, DOI: 10.1016/j.ins.2015.10.005 Mahdevari S., Shahriar K., Esfahanipour A., 2014, Human health and safety risks management in underground coal mines using fuzzy TOPSIS, Science of The Total Environment, 488\u2013489, 85-99, DOI: 10.1016/j.scitotenv.2014.04.076 Mir M.A., Ghazvinei P.T., Sulaiman N.M.N., Basri N.E.A., Saheri S., Mahmood N.Z., Jahan A., Begum R.A., Aghamohammadi N., 2016, Application of TOPSIS and VIKOR improved versions in a multi criteria decision analysis to develop an optimized municipal solid waste management model, Journal of Environmental Management, 166, 109-115, DOI: 10.1016/j.jenvman.2015.09.028 Nong G.P., Pang S.L., 2013, Coordination of Agricultural Products Supply Chain with Stochastic Yield by Price Compensation, IERI Procedia, 5, 118-125, DOI: 10.1016/j.ieri.2013.11.080 Noya I., Aldea X., Gasol C.M., Gonz\u00e1lez-Garc\u00eda S., Amores M.J., Col\u00f3n J., Pons\u00e1 S., Roman I., Rubio M.A., Casas E., Moreira M.T., Boschmonart-Rives J., 2016, Carbon and water footprint of pork supply chain in Catalonia: From feed to final products, Journal of Environmental Management, 171, 133-143, DOI: 10.1016/j.jenvman.2016.01.039 Othman M.K., Fadzil M.N., Rahman N.S.F.A., 2015, The Malaysian Seafarers Psychological Distraction Assessment Using a TOPSIS Method, International Journal of e-Navigation and Maritime Economy, 3, 40- 50, DOI: 10.1016/j.enavi.2015.12.005 Perdana Y.R., 2012, Logistics Information System for Supply Chain of Agricultural Commodity, Procedia - Social and Behavioral Sciences, 65, 608-613, DOI: 10.1016/j.sbspro.2012.11.172 Vinodh S., Prasanna M., Prakash N.H., 2014, Integrated Fuzzy AHP\u2013TOPSIS for selecting the best plastic recycling method: A case study, Applied Mathematical Modelling, 38, 4662-4672, DOI: 10.1016/j.apm.2014.03.007 Wanke P., Barros C.P., Chen Z.F., 2015, An analysis of Asian airlines efficiency with two-stage TOPSIS and MCMC generalized linear mixed models, International Journal of Production Economics, 169, 110-126, DOI: 10.1016/j.ijpe.2015.07.028 Yu J.F., Wang L., Gong X.L., 2013, Study on the Status Evaluation of Urban Road Intersections Traffic Congestion Base on AHP-TOPSIS Modal, Procedia - Social and Behavioral Sciences, 96, 609-616, DOI: 10.1016/j.sbspro.2013.08.071 450 448 Table 2: Weight of index Second order index Weight Third order index Weight Internal risk 0.32 Risk in choosing suppliers and dealers 0.12 Quality risk of the fresh agricultural products 0.23 Technical risk 0.15 Risk of deterioration for the fresh agricultural products 0.23 Risk management decision 0.17 Quality of supply chain risk 0.05 Structure of the supply chain risk 0.05 External risk 0.25 Credit risks 0.08 Market environment risk 0.11 Demand fluctuation risk 0.26 Supply fluctuation risk 0.26 Natural risk 0.10 Policy risk 0.10 Cooperation risk 0.09 Logistics risk 0.28 Transportation risk 0.33 Distribution of risk 0.33 Inventory risk 0.33 Information risk 0.15 Information transfer risk 0.5 Information security risk 0.5 The distances between each index to the positive and the negative is, 1 0.0786d \uf02b \uf03d , 1 0.1348d \uf02d \uf03d , 2 0.1211d \uf02b \uf03d , 2 0.1105d \uf02d \uf03d 3 0.1260d \uf02b \uf03d , 3 0.1088d \uf02d \uf03d , 4 0.0971d \uf02b \uf03d , 4 0.1301d \uf02d \uf03d", "mime": "application/pdf"}, {"id": "cet-394", "words": "2755", "extension": ".pdf", "flesch": "58", "author": "Feng, Q.; Wang, L.; Su, L.; Xu, S.", "title": "Preparation of TiO2@SiO2 with a Hollow Olive-shaped Cable by Electrospinning ", "date": "2017", "keywords": "analysis; coaxial; figure; olive; tio2; tube", "summary": "For example, DG Shin and others synthesized the MoS2/CNT coaxial nanotube by using hydrothermal method (Shin, et al., 2015); Hu and others combined the thermal precipitation and physical evaporation to synthesize three-layer coaxial nanocables (Ga/Ga2O3/ZnO) and the Ga2O3/ZnO two-layer coaxial nanotubes (Hu, et al., 2014); for the composite material of one- dimensional TiO2 /SiO2 nano-structured materials, Zhang and others prepared the coaxial TiO2/SiO2 nanotubes by using the sol-gel and gas method; Xu and others prepared the TiO2/SiO2 composite hollow nanofibres, TiO2@SiO2 submicron coaxial cables and TiO2@SiO2 coaxial double-wall submicron by using electrospinning technology (Xu, et al., 2012). Figure 1: Setup of the multilayer coaxial electrospinning 2.3 The preparation of the TiO2@SiO2 hollow olive-shaped cable The prepared [Sesame oil+Span-80+ Ti(OC4H9)4]@ [PVP+\uff08C2H5O) 4Si] coaxial composite fibers are roasted through the programmed temperature control furnace, and the heating rate is 1\u2103/min.", "mime": "application/pdf"}, {"id": "cet-3940", "words": "2750", "extension": ".pdf", "flesch": "58", "author": "Liu, Q.A.", "title": "A Design of ETL for the Construction of Traffic Network Based on Big Data", "date": "2016", "keywords": "data; etl; extraction; network; processing; rule; system; traffic", "summary": "Computer Science, 38(4): 15-20 Zhang N., Jia Z.Y., Shi Z.Z., 2002, Research on ETL technology in data warehouse[J], Computer Engineering and Applications, 24:213-216 Zhang R., 2010, An overview of ETL data extraction [J]. Traffic data includes data base, picture, video, text and other structured data, unstructured data and semi-structured data and so on.", "mime": "application/pdf"}, {"id": "cet-3941", "words": "3183", "extension": ".pdf", "flesch": "42", "author": "Pan, F.B.; Yu, D.; Wang, M.R.", "title": "Simulation Design of Express Sorting System", "date": "2016", "keywords": "area; center; distribution; express; items; simulation; sorting; system", "summary": "The next is conducting parameter setting for operation object of S city distribution center system: (1) Since the daily processing amount of express items is 150,000, the parameter setting of generator obeys the uniform distribution function uniform (40, 20); (2) We set 8 colors to distinguish express items of different operational areas, among which, the color of express items in unpacking area is different from that an express item is set as 10s; (3) Since the quantity of express items in S city operational area is large, we use 4 colors to represent the express items entering this region, therefore, the parameter setting of generator is duniform (1,4); (4) The resolver parameter is set according to the field research result. (2) Determining System Simulation Target DOI: 10.3303/CET1651077 Please cite this article as: Pan F.B., Yu D., Wang M.R., 2016, Simulation design of express sorting system - example of sf\u2019s sorting center, Chemical Engineering Transactions, 51, 457-462 DOI:10.3303/CET1651077 457 mailto:475591423@qq.com Simulation target must be determined before the system modeled.", "mime": "application/pdf"}, {"id": "cet-3942", "words": "3615", "extension": ".pdf", "flesch": "49", "author": "Zhao, L.M.; Yue, P.", "title": "Study on Chaotic Neural Network and its Application in Blood Cell Classification of Medical Image", "date": "2016", "keywords": "blood; blood cell; cell; classification; cnn; image; rate; recognition", "summary": "4. Results of experiments 4.1 Experimental setup The database used in this work is the HEp-2 set of blood cell image provided by ICPR 2012 for classifying the type of blood cell (Theera-Umpon and Gader, 2002). zhaoxxmu@163.com Automatic analysis and classification of blood cell image has become the main stream of blood cell automatic detection technology.", "mime": "application/pdf"}, {"id": "cet-3943", "words": "3270", "extension": ".pdf", "flesch": "51", "author": "Sha, C.F.; Lu, Z.P.; Li, R.; Zheng, H.; Duodu, E.A.", "title": "A Point Cloud Registration Algorithm for Free-form Surface", "date": "2016", "keywords": "algorithm; cloud; icp; point; ransac; registration; sets", "summary": "Currently, there are usually two automatic registration techniques used in engineering: feature-based matching algorithm, for example sample-sphere matching algorithm based on normal (Meng and Zhang, 2011) and algorithm based on the boundary of point cloud (Wang and Zhang, 2012); ICP algorithm (Besl and Mckay, 1992). 145-152, DOI:10.1109/IM.2001.924423 Senin, N., Colosimo, B. M., Pacella, M., 2013, Point set augmentation through fitting for enhanced icp registration of point clouds in multisensor coordinate metrology, Robotics and Computer-Integrated Manufacturing, 29(1), pp. 39-52.", "mime": "application/pdf"}, {"id": "cet-3944", "words": "3053", "extension": ".pdf", "flesch": "52", "author": "Li, W.; Wang, Q.M.; Wang, X.S.; Wang, H.", "title": "Endpoint Prediction of BOF Steelmaking based on BP Neural Network Combined with Improved PSO", "date": "2016", "keywords": "algorithm; bof; endpoint; layer; network; neural; prediction; pso", "summary": "In this paper, an improved PSO algorithm of reducing inertia weight and adding the constriction factor combined with BP neural network is presented for endpoint prediction in BOF. Yu Y.J., Jiang W.G., Xu M.F., 2011, Prediction of chlorophyll a by BP neural network based on PSO algorithm, Research of environmental sciences 5, 526-532.", "mime": "application/pdf"}, {"id": "cet-395", "words": "3743", "extension": ".pdf", "flesch": "46", "author": "Cinelli, P.; Coltelli, M.B.; Mallegni, N.; Morganti, P.; Lazzeri, A.", "title": "Degradability and Sustainability of Nanocomposites Based on Polylactic Acid and Chitin Nano Fibrils ", "date": "2017", "keywords": "chitin; compost; food; materials; packaging; pla; production; test; use", "summary": "119 The LCA study was aimed at suggesting improvements for the production of NC based materials in terms of sustainability and future marketing. Plastic food packaging materials currently in use are hardly recyclable and very often post consume plastic packaging are directed to incineration or landfill.", "mime": "application/pdf"}, {"id": "cet-396", "words": "3212", "extension": ".pdf", "flesch": "49", "author": "Colangelo, F.; Farina, I.; Penna, R.; Feo, L.; Fraternali, F.; Cioffi, R.", "title": "Use of MSWI Fly Ash for the Production of Lightweight Artificial Aggregate by Means of Innovative Cold Bonding Pelletization Technique. Chemical and Morphological Characterization ", "date": "2017", "keywords": "aggregates; artificial; ash; fly; pelletization; step; waste", "summary": "Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete. The specific treatment of industrial solid wastes plays a key role in order to favor a safer disposal and maximize the efficiency of possible recycling processes (Singh et al.2017).", "mime": "application/pdf"}, {"id": "cet-397", "words": "2473", "extension": ".pdf", "flesch": "49", "author": "Kasher, R.; Regev, C.; Feinstein, R.; Belfer, S.", "title": "Fabrication of a Polymeric Coating Layer with Unique Micro- Spherical Structure on Water Treatment Membranes ", "date": "2017", "keywords": "coating; membrane; micelles; styrene; surface; water", "summary": "DOI: 10.3303/CET1760022 Please cite this article as: Kasher R., Regev C., Feinstein R., Belfer S., 2017, Fabrication of a polymeric coating layer with unique micro- spherical structure on water treatment membranes, Chemical Engineering Transactions, 60, 127-132 DOI: 10.3303/CET1760022 127 Figure 1: Flat (smooth) vs. spherical coating of membrane surface. In this study a straight, one-step generation of spherical polymeric coating on NF membrane surfaces was performed by emulsion co-polymerization of styrene and polyethylene glycol methacrylate (PEGMA) in water.", "mime": "application/pdf"}, {"id": "cet-398", "words": "3513", "extension": ".pdf", "flesch": "49", "author": "Scarsella, M.; Bracciale, M.P.; De Caprariis, B.; De Filippis, P.; Petrullo, A.; Pronti, L.; Santarelli, M.L.", "title": "Improved Photocatalytic Properties of Doped Titanium\u2013Based Nanometric Oxides ", "date": "2017", "keywords": "irradiation; light; size; surface; tio2", "summary": "Two photocatalysts were synthesized Ba- TiO2 and Sr-TiO2 were the metal load is for both 1 % by weight. Naraginti S., Thejaswini T.V.L, Prabhakaran D., Sivakumar A., Satyanarayana V.S.V., Arun A.S., 2015, Prasad Enhanced photo-catalytic activity of Sr and Ag co-doped TiO2 nanoparticles for the degradation of Direct Green-6 and Reactive Blue-160 under UV & vis, Spectrochim.", "mime": "application/pdf"}, {"id": "cet-399", "words": "2935", "extension": ".pdf", "flesch": "49", "author": "De Gisi, S.; Minetto, D.; Lofrano, G.; Libralato, G.; Conte, B.; Todaro, F.; Notarnicola, M.", "title": "Nano-scale Zero Valent Iron (nZVI) Treatment of Marine Sediments Slightly Polluted by Heavy Metals ", "date": "2017", "keywords": "dosage; metals; remediation; removal; sediment; treatment", "summary": "The key mechanisms involved in heavy metal removal by nZVI are adsorption and reduction. J. 217, 54-60 Lofrano G., Libralato G., Minetto D., De Gisi S., Todaro F., Conte B., Calabr\u00f2 D., Quatraro L., Notarnicola M., 2017, In situ remediation of contaminated marine sediment: an overview, Environ.", "mime": "application/pdf"}, {"id": "cet-400", "words": "3110", "extension": ".pdf", "flesch": "56", "author": "Sarno, M.; Ponticorvo, E.; Cirillo, C.; Ciambelli, P.", "title": "Polycyclic Aromatic Hydrocarbons Extraction Based on Graphene Coated Magnetic Alloy Nanoparticles ", "date": "2017", "keywords": "carbon; et al; extraction; feco; figure; nanoparticles; nps; pahs; sarno", "summary": "The stable core-shell G-FeCo NPs were synthesized by catalytic chemical vapor deposition (CCVD) of methane at atmospheric pressure using a catalyst prepared by wet impregnation of gibbsite (\u03b3- DOI: 10.3303/CET1760025 Please cite this article as: Sarno M., Ponticorvo E., Cirillo C., Ciambelli P., 2017, Polycyclic aromatic hydrocarbons extraction based on graphene coated magnetic alloy nanoparticles, Chemical Engineering Transactions, 60, 145-150 DOI: 10.3303/CET1760025 145 Al(OH)3) powder with cobalt acetate and iron acetate solutions (Sarno et al., 2014; Sarno M., Cirillo C., Ciambelli P., 2014, Selective graphene covering of monodispersed magnetic nanoparticles, Chem.", "mime": "application/pdf"}, {"id": "cet-401", "words": "2831", "extension": ".pdf", "flesch": "42", "author": "Sarno, M.; Casa, M.; Cirillo, C.; Ciambelli, P.", "title": "Complete Removal of Persistent Pesticide Using Reduced Graphene Oxide\u2212Silver Nanocomposite ", "date": "2017", "keywords": "chlordane; graphene; nanoparticles; oxide; rgo_ag; silver; water", "summary": "A two-step mechanism, involving chlordane degradation by Ag nanoparticles and subsequent adsorption of the degraded products: ether bis(2-chloro allyl), 1,10-dichlorodecane and octadecanoid acid were detected, on the reduced graphene oxide surface, leads to a complete removal of chlordane from water solution in only 11 minutes at room temperature. Gupta S. S., Chakraborty I., Maliyekkal S. M., Mark T. A., Pandey D. K., Das S. K., Pradeep T., 2015 Simultaneous Dehalogenation and Removal of Persistent Halocarbon Pesticides from Water Using Graphene Nanocomposites: A Case Study of Lindane, ACS Sustainable Chemistry and Engineering, 3, 1155\u20131163.", "mime": "application/pdf"}, {"id": "cet-402", "words": "3172", "extension": ".pdf", "flesch": "52", "author": "Patterer, S.; Bavasso, I.; Sambeth, J.; Medici, F.", "title": "Cadmium Removal from Acqueous Solution by Adsorption on Spent Coffee Grounds ", "date": "2017", "keywords": "adsorption; cadmium; order; pseudo; removal; scg", "summary": "Figure 2: (a) Comparison of adsorption model responses for cadmium adsorption on SCG at T=10\u00b0;.(b) Langmuir equation provided the best fit to the data at all the studied temperatures (high R2 value) as shown in Figure 2, in which is reported the data fitting of the run performed at 10\u00b0C, identified in our test as the most favorable temperature for cadmium adsorption.", "mime": "application/pdf"}, {"id": "cet-403", "words": "3035", "extension": ".pdf", "flesch": "54", "author": "Maharramov, A.; Allahverdiyeva, G.; Hasanova, U.; Ramazanov, M.; Di Palma, L.", "title": "Synthesis and Application of Zeolite and Glass Fiber Supported Zero Valent Iron Nanoparticles as Membrane Component for Removal Nitrate and Cr (+6) Ions ", "date": "2017", "keywords": "nitrate; nps; removal; water; zvi; zvi nps", "summary": "As it can be seen from Figure 4 the adsorption capacity also increased from 3.4 to 9 mg/g for ZE-ZVI NPs and from 2.6 mg/g to 7.6 mg/g for GF ZVI NPs. Particularly in the recent years zero valent iron nanoparticles ZVI NPs attract the significant interest as a soft reducing agent, and due to its biocompatibility it can be used in green environmental technologies.", "mime": "application/pdf"}, {"id": "cet-404", "words": "3281", "extension": ".pdf", "flesch": "50", "author": "Lu, H.; Tian, B.; Wang, J.; Hao, H.", "title": "Montmorillonite-Supported Fe/Ni Bimetallic Nanoparticles for Removal of Cr(VI) from Wastewater ", "date": "2017", "keywords": "chemical; cr(vi; doi; iron; mmt; nanoparticles; nzvi; removal", "summary": "Bhaumik M., Noubactep C., Gupta V.K., McCrindle R.I., Maity A., 2015, Polyaniline/Fe0 composite nanofibers: An excellent adsorbent for the removal of arsenic from aqueous solutions, Chemical Engineering Journal, 271, 135-146, DOI: 10.1016/j.cej.2015.02.079. Bhowmick S., Chakraborty S., Mondal P., Renterghem W.V., Berghe S.V., Roman-Ross G., Chatterjee D., Iglesias M., 2014, Montmorillonite-supported nanoscale zero-valent iron for removal of arsenic from aqueous solution: Kinetics and mechanism, Chemical Engineering Journal, 243, 14-23, DOI: 10.1016/j.cej.2013.12.049.", "mime": "application/pdf"}, {"id": "cet-4044", "words": "3183", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-4044", "date": null, "keywords": "bearing; capacity; compression; concrete; element; strength; wall", "summary": "As an early-stage common approach to fortifying anti- seismic structures in Japan, to integrate reinforced concrete based shear walls with a structure was characterized by large flexural rigidity and strong lateral force resistance. As a result, it was replaced with grid walls, as is shown in Figure 1(a), with good decorative, lighting, and ventilating effects.", "mime": "application/pdf"}, {"id": "cet-4046", "words": "3461", "extension": ".htm", "flesch": "57", "author": "Xu, X.G.; Liu, Z.X.; Yue, J.H.", "title": "Response Characteristics of Collapse Column in Coal Mining Working Face by Geoelectric Transillumination Method", "date": "2016", "keywords": "body; coal; collapse; column; kji", "summary": "Collapse column \u2018s electrical response characteristics 3.1 Through type collapse column For the research of response characteristics of collapse column by geoelectric transillumination, three layers geoelectric model with collapse column has been designed. h1 h2 l Roof Floor Coal seam Roadway A Roadway B Abnormal body Figure 6: Concealed collapse column model.", "mime": "application/pdf"}, {"id": "cet-4047", "words": "2792", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-4047", "date": null, "keywords": "concrete; connection; horizontal; performance; shear; shear wall; structure; value; wall", "summary": "Shear wall structure to ensure the overall stiffness of building structures, seismic action can be effectively transmitted to the foundation, the structure itself is protected from damage or reduce the extent of the damage, which will help after the earthquake repair (Marthong, 2013). 7- Shear the lower wall of prefabricated wall panel; 8- vertical slurry anchor reinforcement; 9- reinforced horizontal distribution; 10- stirrups 1094 The combination of shear wall structure in different parts of different connectivity features requirements, using two different methods of mixing steel connection joint construction process, construction of shear walls on both sides of the edge member or restrict the use of the side edge member structure is basically the same cast connection, connection reliability solve important edge member; vertical shear for the central distribution of steel parts used to facilitate the connection of vertical steel anchors indirect pulp lap connection method to solve the construction of convenience.", "mime": "application/pdf"}, {"id": "cet-4048", "words": "2327", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-4048", "date": null, "keywords": "aggregate; analysis; concrete; design; mix; performance; porosity", "summary": "Based on pervious concrete summarized existing research results, based on pervious concrete mix design features in- depth analysis of the relationship between the parameters and principles of performance and mechanical properties of porous concrete between the constituent materials; and selecting suitable raw materials, optimization of flooding concrete materials to determine the best ratio of porous concrete; Finally, life cycle environmental assessment system, ordinary concrete, pervious concrete and pervious concrete high performance environment coordination of the evaluation carried out. Based on pervious concrete mix design features in-depth analysis of the relationship between the parameters and principles of performance and mechanical properties of porous concrete between the constituent materials; and selecting suitable raw materials, optimizing pervious concrete material, permeable to determine the best ratio of concrete; Finally, life cycle environmental assessment system, ordinary concrete, pervious concrete and pervious concrete high performance environment coordination of the evaluation carried out.", "mime": "application/pdf"}, {"id": "cet-4049", "words": "2309", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-4049", "date": null, "keywords": "beam; concrete; displacement; frame; load; specimen; steel; structure", "summary": "Summarizing existing connection based on the concept of prefabricated reinforced concrete frame structure part, that reinforced concrete prefabricated column frame structure is decomposed into two parts and precast beams, beams and only reinforced the core area disposed within the range of the connection zone member, in reinforced concrete structures is not continuous, non-reinforced connecting region of SRC (Ricci, 2013). 3 specimens, 1SI and 2SI connecting region did not appear damaged, 3SI connection area damage because of the lower part of the column of steel reinforcement, so the contrast intensity beam-column joints connecting area and the core area of the connecting area of cracks is always less than 0.2mm, meet regulatory requirements, the situation on the steel reinforced concrete from peeling does not appear, shear key reliable anti-slip effect, can be 1109 connected by means of connection of reinforced concrete structures of unreinforced steel reinforced concrete structure.", "mime": "application/pdf"}, {"id": "cet-405", "words": "3203", "extension": ".pdf", "flesch": "49", "author": "Vilardi, G.; Di Palma, L.; Verdone, N.", "title": "Competitive Reaction Modelling in Aqueous Systems: the Case of Contemporary Reduction of Dichromates and Nitrates by nZVI ", "date": "2017", "keywords": "cr(vi; model; nzvi; palma; reduction", "summary": "178 Figure 3: competitive model results of nitrates reduction fixing the initial Cr(VI) concentration to 1.8 mM. Table 1: kinetic parameters obtained by model data fitting (Unit of measure defined in the text). The purpose of this work consists in the development of a simple competitive model capable of predicting the nZVI-p consumption taking into account the initial concentration of the chemical species and the theoretical stoichiometry of the parallel reactions (competitive reduction of nitrates and Cr(VI) by nZVI-p).", "mime": "application/pdf"}, {"id": "cet-4050", "words": "2978", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-4050", "date": null, "keywords": "cement; coefficient; grouts; law; power; time; viscosity", "summary": "Yang Z.Q., Niu X.D., Hou K.P., Zhou Z.H., Liang W., Guo Y.H., Lu Y.F., Yang B.J., Cheng Y., 2015, Columnar diffusion of cement grout with time dependent rheological parameters, Chinese Journal of rock mechanics and Engineering, 34(7): 1415-1425. Based on the water cement ration (W/C), cement grouts usually may be divided into three categories: Power- law fluid, Bingham fluid and Newtonian fluid (Zenit et al., 2001).", "mime": "application/pdf"}, {"id": "cet-4051", "words": "3441", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-4051", "date": null, "keywords": "compensation; eco; price; quota; resources; rights; water; water rights", "summary": "The property right of the water resources is defined, and an eco- compensation model based on water rights auction is described where the price of water rights is determined under the premise of benefit maximization of the bidders. By water rights auction, the water rights price will constantly approach the true value if the government provides limited quota and clear definition of water rights.", "mime": "application/pdf"}, {"id": "cet-4052", "words": "3918", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-4052", "date": null, "keywords": "engineering; fault; fracture; gpr; groundwater; rock; structure; tsp; tunnel", "summary": "Theory DOI: 10.3303/CET1651188 Please cite this article as: Wei L.W., 2016, Research on tunnel engineering geological exploration system based on tunnel seismic predication and ground-penetrating radar, Chemical Engineering Transactions, 51, 1123-1128 DOI:10.3303/CET1651188 1123 and practice have make know, that TSP method mainly reflects the rock\u2019s mechanical property so belongs to the long distance geological forecast, and its detecting effects is better to the layered media, but detecting effect is unperfected on mini type karst, its interpret to the long distance is not enough accurate. With application of advanced detecting methods in home and abroad, to forecast unfavourable geological structures in front of working face, accurately and in time, many sensors are currently investigated for this demand, for example ground-penetrating radar(GPR), tunnel GPR is a quick, continuous and non-destructive geophysical prospecting method.", "mime": "application/pdf"}, {"id": "cet-4053", "words": "3033", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-4053", "date": null, "keywords": "basin; businesses; development; evaluation; fields; gas; oil; salt; shale", "summary": "Based on the analysis above, the evaluation management theory, the sustainable development theory, and the system theory could be used as a guidance to study evaluation indexation system of evaluation development in oil fields. As is shown in Figure 1, oil fields could maintain a balance between core and noncore businesses under the guidance of the evaluation management theory; the core and noncore businesses could develop into a dynamic organism under the guidance of system theory; oil fields could realize its dynamic balance with natural resource, environment, economy, and society under the guidance of the theory of sustainable development, so as to achieve the final goal of evaluation sustainable development (Cai et al., 2013).", "mime": "application/pdf"}, {"id": "cet-4054", "words": "2849", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-4054", "date": null, "keywords": "coal; component; fluorescence; lda; number; pre; processing; samples; water", "summary": "According to the relevant inrush accident research report, five kinds of water samples (ordovician limestone water, goaf water, alluvial water, sandstone water, limestone water) are collected from a mine at Huai Nan, An Hui province. Original fluorescence spectrum of water samples 2.3", "mime": "application/pdf"}, {"id": "cet-4055", "words": "2255", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-4055", "date": null, "keywords": "concrete; consolidation; rebar; stress; stress wave; wave", "summary": "Under transient impact force, the rebar end propagated the vibration to the other end in the form of stress wave. The reason is that the initial concrete strength has not formed, thus exerting little bond stress on the rod body; however, the concrete strength increases as the concrete continues to be cured, leading to a prolonged reflection of stress wave at the bottom of the anchoring bar(Zhou, et al., 1985).", "mime": "application/pdf"}, {"id": "cet-4056", "words": "3505", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-4056", "date": null, "keywords": "enterprises; food; gmf; haccp; human; law; public; risk; safety", "summary": "The laws on food safety in China consist of a set of laws, guided by Food Safety Law, Product Quality Law and Standardization Law, with special regulations on food safety including Food Hygiene Administrative Punishment Measures and Food Hygiene Supervision Procedures as the main body, and supplemented by relevant specifications in laws and rules such as Law on Protection of Consumers Rights and Interests, Contagious Law Prevention Law, Criminal Law, etc. Social supervision mechanism of media (including network media and so on), experts, public figures and the public has drawbacks in the field of food safety.", "mime": "application/pdf"}, {"id": "cet-4057", "words": "3727", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-4057", "date": null, "keywords": "equation; oil; oils; point; principal; regression; smoke; value", "summary": "Soybean oil and rapeseed oil samples with different contents of free fatty acid, peroxide, phosphorus, solvent, moisture and volatile matter were collected and their mathematical relationships with smoke point was analyzed by principal component regression. To satisfy consumers\u2019 requirement of less smoke, vegetable oils should possess certain thermal stability, which was evaluated by smoke point and dependent on the content of the minor compounds.", "mime": "application/pdf"}, {"id": "cet-406", "words": "3651", "extension": ".pdf", "flesch": "49", "author": "Gallo, A.; Sethi, R.", "title": "Microscopic Zero Valent Silver for Dye Removal in Wastewater ", "date": "2017", "keywords": "degradation; dyes; nanoparticles; particles; removal; silver", "summary": "The novelty of the approach examined in this study resides in synthetizing silver particles with sodium borohydride using a reagents stoichiometry which leads to particles which quickly aggregates in micrometric clusters, hence significantly reducing their mobility. Not only nanoparticles can be applied to different AOPs (Minero et al., 2005, Minella et al., 2016) but can also be applied directly to groundwater via injection (Tosco et al., 2014).", "mime": "application/pdf"}, {"id": "cet-407", "words": "2172", "extension": ".pdf", "flesch": "46", "author": "Caracciolo, D.; Vaiano, V.; Matarangolo, M.; Sacco, O.; Sannino, D.; Gambicorti, T.; Calvanese, G.", "title": "Treatment of Dyeing and Finishing Waters Using Innovative Photocatalysts ", "date": "2017", "keywords": "dyeing; finishing; photocatalyst; waters; zno", "summary": "Figure 3 shows the results in terms of discoloration for dyeing water and finishing waters as a function of run time. In particular, it was obtained a discoloration degree of about 56, 76 and 98% for dyeing water, finishing water 1 and 2, respectively, while TOC removal was about 40% for all the treated waters.", "mime": "application/pdf"}, {"id": "cet-408", "words": "3805", "extension": ".pdf", "flesch": "47", "author": "Crevacore, E.; Boccardo, G.; Grillo, A.; Marchisio, D.; Sethi, R.", "title": "Pore-Scale Simulations of Particle Transport for Groundwater Remediation: the Effect of Gravitational Settling ", "date": "2017", "keywords": "deposition; fluid; grains; gravity; particle; simulations; transport", "summary": "In this work, we investigate particle deposition efficiency in porous media by way of pore-scale computational fluid dynamics simulations. Then, we focus on the effect of gravitational settling on particle deposition, comparing our results with the well-known simplified theoretical laws, showing how pore-scale numerical experiments can improve the prediction accuracy of these laws but, most of all, help gain fundamental insights in the physical mechanisms at work.", "mime": "application/pdf"}, {"id": "cet-4337", "words": "2854", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-4337", "date": null, "keywords": "air; condenser; conditioning; fin; fin width; heat; system; transfer; width", "summary": "In this paper, a new type structure of condenser of automotive air conditioning system has been studied, and some conclusion has been obtained: (1) Unit area heat exchange decreases when the fin width increases. In the development of automotive air conditioning system, the role of numerical simulation model becomes more and more important (B. Taxis-Reischl, S. Morgenstern, F. Brotz (2001)).", "mime": "application/pdf"}, {"id": "cet-4338", "words": "3660", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-4338", "date": null, "keywords": "algorithm; emission; lifting; noising; signal; wavelet", "summary": "Conclusion This paper conducted a deep research to wavelet de-noising methods of acoustic emission signal, analysing the selection of threshold value function and optimization of threshold value in de-noising processes. This thesis adopts wavelet threshold value noise method to deal with de-noising of acoustic emission signal without exception.", "mime": "application/pdf"}, {"id": "cet-4339", "words": "3816", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-4339", "date": null, "keywords": "communication; laser; laser communication; pointing; research; satellite; space; space laser; system; technology; tracking", "summary": "Microsoft Word - cet-01.docx CHEMICAL ENGINEERING TRANSACTIONS VOL. 46, 2015 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Peiyu Ren, Yancang Li, Huiping Song Copyright \u00a9 2015, AIDIC Servizi S.r.l., ISBN 978-88-95608-37-2; ISSN 2283-9216 Overview of Research on Space Laser Communication Tracking and Pointing Technology Qinglong Hu*a,b, Zhaohui Lia, Liang Yanga, Ke Qiaoa, Xuejun Zhanga aChangchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Science, Changchun 130033, China bUniversity of Chinese Academy of Sciences, Beijing 100049, China huqinglong.hit@163.com Laser communication system is built to satisfy the urgent need of information transmission of the earth observation system and space-based information in high resolution and the need of high-speed transmission rate of distribution system. Laser communication system makes use of laser frequency band, takes laser as information carrier and transmits information by the modulation of laser pulse and thus achieves information exchange.", "mime": "application/pdf"}, {"id": "cet-4340", "words": "2809", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-4340", "date": null, "keywords": "anchor; capsule; construction; displacement; strength; type", "summary": "A destructive pull-out experiment based on the engineering demands was carried out for this type of underreamed anchor, which was then compared with the conventional anchor. Underreamed anchor with grouting in the bag at one end can solve the defects of the above-mentioned reaming techniques.", "mime": "application/pdf"}, {"id": "cet-4341", "words": "2851", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-4341", "date": null, "keywords": "analysis; figure; image; processing", "summary": "Seeds image is collected in order to locate and analyze. Industrial camera in the system is used to collect seeds image.", "mime": "application/pdf"}, {"id": "cet-4342", "words": "3833", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-4342", "date": null, "keywords": "condition; current; fault; flux; phase; pmsm; torque; voltage", "summary": "The simulation model is established based on finite element analysis (FEA) software in order to analyze PMSM\u2019s various operation performance parameters both normal condition and asymmetry condition caused by single-phase power voltage sag, and the experimental and simulation results show that the relationship between output torque and power voltage sag is linear, and the output torque fluctuation is raised with aggravation of power asymmetry level; it is take a long time to make the PMSM run in steady state; the current of fault phase is degraded, and the fluctuation is raised, and the third harmonic of the fault phase is raised so significant compared with normal condition that it can be as a feature for fault diagnosis; the flux linkage of three phases is no remarkable change and the flux linkage of the fault phase has a little more obvious change than the other two phase; the PMSM output torque contains harmonic components caused by negative sequence component, and these results of the paper can provide the basis for catching fault character and regaining healthy operation as fast as possible. PMSM parameters analysis under power voltage asymmetrical fault condition The power voltage is symmetrical normally under normal condition, but when the power grid loads fluctuation or loads asymmetry, inverter power supply system fault or PMSM drive system fault the three-phase power voltage of the PMSM is no longer symmetry.", "mime": "application/pdf"}, {"id": "cet-4343", "words": "3513", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-4343", "date": null, "keywords": "control; guideway; system", "summary": "The primary task of EMS systems is to eliminate the influence of gravity via electromagnetic forces, which can avoid contact, and thus, no friction. Basic principle of EMS system The MAGLEV train, as a new kind of high-tech transportation methods, is levitated by the electromagnetic suspension (EMS) system.", "mime": "application/pdf"}, {"id": "cet-4344", "words": "2690", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-4344", "date": null, "keywords": "chamber; combustion; gas; leakage; piston; piston ring; pressure; ring", "summary": "Sealing is the main task of gas rings, namely sealing the gas, to prevent the gas of combustion chamber to flow into the crankcase, and to keep the amount of gas leakage as few as possible (Kong (1992), Lu (2014)). [Maintenance and Reliability], 48 (4), 72-81 Krisada W., Somchai C., 2008, Surachai S, Simulation algorithm for piston ring dynamics,Simulation Modelling Practice and Theory, 16(1), 127-146, DOI: 10.1016/j.simpat.2007 Lu P., Zhang Y., Zhang M.H., Liu X.R., 2014, Simulation and analysis of the effect of piston ring group parameters on blow-by, Journal of Chinese Agricultural Mechanization, 35(2), 193-197, DOI: 10.13733/j.jcam.issn.2095-5553.2014.02.047 Mohammed, U., Gokhale N., Pardeshi S., Gokhale U., Kumar M.N., 2015, Analysis of parameters affecting liner bore distortion in diesel engines, SAE Technical Papers, DOI: 10.4271/2015-26-0178 Poort M., Cheng C., Richardson Dan., Schock H., 2014, Piston ring and groove side wear analysis for diesel engines, ASME 2014 Internal Combustion Engine Division Fall Technical Conference, DOI: 10.1115/ICEF2014-5670 Poort M., Cheng C., Richardson D., Schock H., 2015, Piston ring and groove side wear analysis for diesel engines, Journal of Engineering for Gas Turbines and Power, 137(11) DOI: 10.1115/1.4030290 Senatore A., Aleksendric D., 2014, Engine piston rings improvement through effective materials, advanced manufacturing methods and novel design shape, Industrial Lubrication and Tribology, 66(2), 298-305, DOI: 10.1108/ILT-01-2012-0010 Su Y.Y., Wang B.J., 1998, The blow-by analysis of engine piston ring, Journal of University of Shanghai", "mime": "application/pdf"}, {"id": "cet-4345", "words": "3866", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-4345", "date": null, "keywords": "binary; combination; information; internet; parts; surface; tree", "summary": "3.3.2 Characteristic analysis of part information combination oriented to MC-VE Parts geometry information oriented to MC-VE is described by the international standard STEP and XML format file. The characteristic and demand of part information are analysed of a mixed cloud virtual enterprises (MC-VE) based on the Internet and Internet of thing.", "mime": "application/pdf"}, {"id": "cet-4346", "words": "2241", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-4346", "date": null, "keywords": "brake; displacement; drum; figure; friction; shoe; stress", "summary": "First brake drum assembly 3D model including brake drum, brake shoe, brake block, and friction plate was established; then finite element analysis of drum brake assembly was made, considering the friction between assemblies as well as the relative sliding between brake shoe and brake block, brake block and friction plate. Schematic structure of drum brake was as shown in figure 1.The simplified drum brake assemble (Rudolf (1992), Shi Wenku (2005),) was made up of 7 parts: brake drum, left and right brake shoes, two pieces of brake blocks and two pieces of friction plates, in which left and right brake shoes, two pieces of brake blocks and two pieces of friction plates were completely symmetry.", "mime": "application/pdf"}, {"id": "cet-4347", "words": "2546", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-4347", "date": null, "keywords": "connector; contact; load; mpa; pressure; sealing; stress; surface", "summary": "With the increase of tension, connector sealing ability declines, which is characterized with the decrease of maximum contact pressure, and PSC-\u2160 is worse than the PSC- \u2161. Specially, contact pressure in sealing surface is higher than in the shoulder as the tension exceeds 600 kN, indicating that the sealing surface / spot played a major role for connector seal. This study has used the finite element method to compute the stress and contact pressure of the Premium Shouldered connector under different loads, including the tension, internal pressure and combined load.", "mime": "application/pdf"}, {"id": "cet-4348", "words": "2971", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-4348", "date": null, "keywords": "current; electric; filter; frequency; harmonic; pass; shock; signal", "summary": "To the power frequency grid, electric shock frequency signal will not exceed 1 kHz, and higher than 20 times harmonics the shock exist, large amplitude. To detect and identify biologic shock current signal is one of the key issues of RCD nuisance tripping and refusal operation.", "mime": "application/pdf"}, {"id": "cet-4441", "words": "3590", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-4441", "date": null, "keywords": "demand; design; model; optimization; polygeneration; process; profit; system; target", "summary": "The use of this methodology leads to the development of a mathematical model that maximizes robustness against uncertainty, subject to the achievement of system targets. Mathematical programming methods have proven to be valuable for the optimal synthesis of such polygeneration systems.", "mime": "application/pdf"}, {"id": "cet-4442", "words": "3483", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-4442", "date": null, "keywords": "anaerobic; biomass; criteria; digestion; gas; hydrogen; process; reforming; sofc; temperature", "summary": "In this study, the hydrogen and SOFC process is designed for electrical power of 100 kW. \uf029 c h o n s 2 2 4 3 2 1 1 C H O N S 4c h 2o 3n 2s H O 4c h 2o 3n 2s CO 4 8 1 4c h 2o 3n 2s CH nNH sH S 8 \uf02b \uf02d \uf02d \uf02b \uf02b \uf0ae \uf02d \uf02b \uf02b \uf02b \uf02b \uf02b \uf02d \uf02d \uf02d \uf02b \uf02b (3) The last flowsheet is based on biomass reforming process integrated with SOFC.", "mime": "application/pdf"}, {"id": "cet-4443", "words": "2746", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-4443", "date": null, "keywords": "analysis; column; control; design; distillation; methodology; process; sustainability", "summary": "A smaller derivative means that the process sensitivity is lower, hence, from process control of view, distillation column design A is less sensitive to the effect of disturbance thus make it more robust in maintaining its controlled variable in the presence of disturbances. Format And Type Fonts CHEMICAL ENGINEERING TRANSACTIONS VOL. 45, 2015 A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Sharifah Rafidah Wan Alwi, Jun Yow Yong, Xia Liu Copyright \u00a9 2015, AIDIC Servizi S.r.l., ISBN 978-88-95608-36-5; ISSN 2283-9216 DOI: 10.3303/CET1545036 Please cite this article as: Nordin M.Z., Othman M.R., Hamid M.K.A., 2015, Application of sustainable integrated process design and control for four distillation column systems, Chemical Engineering Transactions, 45, 211-216 DOI:10.3303/CET1545036 211 Application of Sustainable Integrated Process Design and Control for Four Distillation Column Systems Mohamad Z. Nordina, Mohamad R. Othmanb, Mohd K. A. Hamid*a a Process Systems Engineering Centre (PROSPECT), Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia b Process System Engineering Group (PSERG), Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Kuantan, Pahang, Malaysia kamaruddin@cheme.utm.my The objective of this paper is to present the application of sustainable integrated process design and control methodology for distillation columns systems.", "mime": "application/pdf"}, {"id": "cet-4444", "words": "2712", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-4444", "date": null, "keywords": "cycle; heat; model; power; refrigeration; temperature", "summary": "Rigorous simulations of refrigeration cycles are carried out with the following assumptions: 1. Case 2: Prediction power requirement in cascaded refrigeration cycle This case compares the total shaft work prediction by the shortcut model with the shaft work calculated using HYSYS and with the published data of Branan (2005) when there is a large temperature difference between refrigerant condensing and evaporation.", "mime": "application/pdf"}, {"id": "cet-4445", "words": "2731", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-4445", "date": null, "keywords": "energy; pressure; solution; value; water", "summary": "It can be stated the value of \uf02a sC\uf044 should be significantly decrease in order to reach higher water flux. It can 227 also be stated from this figure that the concentration fall on the sponge layer and on the external boundary layer is also rather high due to its low values at higher value of S and A.", "mime": "application/pdf"}, {"id": "cet-4446", "words": "2196", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-4446", "date": null, "keywords": "method; processes; regeneration; stream", "summary": "Until very recently, graphical methods are still important tools for synthesis of water network (Zhang et al., 2015), design of hydrogen networks (Yang et al., 2014), planning and design of low carbon product (Mohd Nawi et al., 2014), and targeting and design of multiple utility systems (Wan Alwi et al., 2014). 234 Notation Cmax,in \u2014\u2014 the limiting data for inlet concentration, ppm Cmax,out \u2014\u2014 the limiting data for outlet concentration, ppm Fmax \u2014\u2014 the maximum flow rate of the processes, t/h FOPs \u2014\u2014 the processes which use freshwater only M \u2014\u2014 the mass load of the processes, g/h Reference Feng X., Bai J., Zheng X.S., 2007, On the use of graphical method to determine the targets of single- contaminant regeneration recycling water systems, Chemical Engineering Science, 62, 2127-2138.", "mime": "application/pdf"}, {"id": "cet-4447", "words": "3039", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-4447", "date": null, "keywords": "benzene; cost; energy; heat; integration; process; retrofit; unit", "summary": "The main parameters, which influence the HEN capital cost includes number of heat exchangers, their heat exchanger area, the type of heat exchangers and pressure drop of heat carriers, the installed capital cost of heat exchanger and re-piping. Figure 1: The flowchart of the existing process (COMP \u2013 compressors; R \u2013 reactors; K \u2013 distillation columns; M \u2013 mixers; HE \u2013 heat exchangers; GC \u2013 gas cooler; COL \u2013 coolers; AC \u2013 air coolers; RW - recycled water; HW \u2013 hot water; CW \u2013 cold water)", "mime": "application/pdf"}, {"id": "cet-4448", "words": "3875", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-4448", "date": null, "keywords": "actions; doi; energy; framework; health; hospitals; management; program; saving; sustainability", "summary": "A system of systems approach to energy sustainability assessment: Are all renewables really green? According to Raza et al. (2014), the two biggest barriers of energy efficiency reported by hospitals participating in the study were related to internal resources, including human resources to control the programs and the costs of the actual energy efficiency actions.", "mime": "application/pdf"}, {"id": "cet-4449", "words": "3110", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-4449", "date": null, "keywords": "concentration; control; flow; membrane; module; mpc; permeate; water", "summary": "flavio.manenti@polimi.it This article is devoted to the study of optimal control strategies for reverse osmosis membrane modules with recirculation. In recent years more and more research papers devoted to the development of mathematical models of reverse osmosis membranes have been published.", "mime": "application/pdf"}, {"id": "cet-4450", "words": "3093", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-4450", "date": null, "keywords": "absorption; ammonia; capture; co2; efficiency; gas; membrane; solution", "summary": "A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Sharifah Rafidah Wan Alwi, Jun Yow Yong, Xia Liu Copyright \u00a9 2015, AIDIC Servizi S.r.l., ISBN 978-88-95608-36-5; ISSN 2283-9216 DOI: 10.3303/CET1545043 Please cite this article as: Molina C.T., Bouallou C., 2015, Carbon dioxide absorption by ammonia intensified with membrane contactors, Chemical Engineering Transactions, 45, 253-258 DOI:10.3303/CET1545043 253 Carbon Dioxide Absorption by Ammonia Intensified with Membrane Contactors Carol Toro Molina, Chakib Bouallou* MINES ParisTech, PSL Research University - Centre for Energy efficiency of Systems, 60 bd Saint Michel, 75006 To improve and reduce these costs, membrane contactor, has been developed and coupled to the chemical absorption.", "mime": "application/pdf"}, {"id": "cet-4451", "words": "3446", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-4451", "date": null, "keywords": "catalyst; co2; figure; monolith; photoreactor; reduction; surface; tio2", "summary": "All the samples of Au- doped TiO2 show higher absorbance intensities than un-doped TiO2. These results confirmed higher stability of Au- doped TiO2 catalyst, with supressed coke production.", "mime": "application/pdf"}, {"id": "cet-4452", "words": "3698", "extension": ".pdf", "flesch": "59", "author": null, "title": "cet-4452", "date": null, "keywords": "capture; carbon; co2; header; purity; storage; utilisation", "summary": "Aside from estimating CO2 utilisation, this method also allows an industrial site planner to identify the suitable industries that can act as CO2 sources or CO2 demands for a given region. (3) How can the amount of CO2 purity required by the industries (demands) be satisfied?", "mime": "application/pdf"}, {"id": "cet-4650", "words": "3753", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-4650", "date": null, "keywords": "air; boiler; combustion; emission; malaysia; mill; oil; palm; palm oil; particulate; plant", "summary": "The sampling procedures were made according to the standard procedure USEPA Method 5 - \u201cDetermination of particulate emissions from stationary sources\u201d. Overloading of fuel (i.e. fibre and shell) could cause higher rate of particulate emission.", "mime": "application/pdf"}, {"id": "cet-4651", "words": "3409", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-4651", "date": null, "keywords": "biorefinery; boiler; connectance; eco; eip; plant; product", "summary": "I generated from PPM is sent to potential bioenergy or bio- product related industries j \u03f5 J, where it is converted into bio-product and by-products. Case Study In this work, a PPM is planning to set up a joint venture to form an EIP with five potential bioenergy or bio- product related industries, termed biorefineries.", "mime": "application/pdf"}, {"id": "cet-4652", "words": "2988", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-4652", "date": null, "keywords": "carbon; ch4; co2; gas; matrimid; membrane; performance; polymer; separation", "summary": "Ning and Koros (2014) fabricated carbon membrane from Matrimid 5218 ,under an inert argon atmosphere at 800\u00b0C while Favvas and coworkers (2007) prepared carbon membrane by carbonization process up to 900 \u00b0C using Matrimid 5218 and result in high performance of carbon membranes. Recently, there has been a growing interest in the development of gas separation by using carbon membrane as it may give high separation performance (Wey et al., 2014).", "mime": "application/pdf"}, {"id": "cet-4653", "words": "2521", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-4653", "date": null, "keywords": "calcium; carbonate; crystal; inhibition; inhibitors; papemp; scale; water", "summary": "The use of polyphosphates for calcium carbonate crystal growth inhibition was also investigated (Lin and Singer, 2005) and sodium tri-polyphosphate was found to be the strongest inhibitor in a mono Experimental 2.1 Calcium carbonate crystal growth inhibition experiments Static beaker tests were employed to study calcium carbonate crystal growth inhibition in oversaturated solutions containing CaCl2 and NaHCO3 in the absence and presence of various concentrations of selected inhibitors.", "mime": "application/pdf"}, {"id": "cet-4654", "words": "3739", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-4654", "date": null, "keywords": "coagulant; extraction; model; removal; response; temperature; turbidity; value; viscosity", "summary": "At high drying temperature, the turbidity removal decreased. Similarly, the viscosity was low at high drying temperature.", "mime": "application/pdf"}, {"id": "cet-4655", "words": "2475", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-4655", "date": null, "keywords": "atrazine; binding; mip; monomer; polymer; recognition; template; water", "summary": "The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP) by using a commercial C8 sorbent. The tube was sealed and placed in a water bath at 60 \u00b0C for 20 h. As a control, non-imprinted polymer (NIP) was simultaneously prepared in the same manner but without the addition of the template.", "mime": "application/pdf"}, {"id": "cet-4656", "words": "3980", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-4656", "date": null, "keywords": "ionps; layer; nanocomposite; pdda; polyelectrolyte; pss; silica; structure; surface; water", "summary": "The TEM images demonstrated that single PDDA layer promote a thinner IONPs deposition with orderly IONPs distribution compared to multiple PDDA/PSS/PDDA layer. Since frequency and dissipation factors owned different time dependencies, direct comparison between the two systems can be evaluated by taking into account of the relationship of dissipation over frequency shift (hereafter known as D-f) in order to eliminate time-dependency as an explicit parameter (H\u00f6\u00f6k et al., 2001).", "mime": "application/pdf"}, {"id": "cet-4657", "words": "2968", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-4657", "date": null, "keywords": "addition; atps; concentration; design; partitioning; phase; purification; recovery; salt", "summary": "Purification factor (PF) was defined as the ratio of top phase PHA concentration to the overall PHA concentration using: PF = (Top Phase PHA Concentration)/(Overall PHA Concentration) (4) 2.4 Optimisation Model Optimization of parameters pH and salt addition concentration was done through the application of software called Design Expert\u2122. Recovery Yield (Y), % of PHA in top phase was evaluated using: 1497 Y = 100/(1+[1/(Vr\u00d7KPHA)] ) (3) where Vr was denoted by volume ratio and KPHA was denoted by partition coefficient of PHA.", "mime": "application/pdf"}, {"id": "cet-4658", "words": "3768", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-4658", "date": null, "keywords": "acid; concentration; fermentation; initial; medium; niger; production; sugar", "summary": "Papagianni M., 2007, Advances in citric acid fermentation by Aspergillus niger: Biochemical aspects, membrane transport and modeling, Biotechnology advances, 25(3), 244 - 263. A significant increase of citric acid concentration was observed as the initial of fermentation medium was increasing from pH 2 - 3.", "mime": "application/pdf"}, {"id": "cet-4659", "words": "3676", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-4659", "date": null, "keywords": "activation; adsorption; analysis; anova; carbon; co2; min; rate; temperature", "summary": "Data analysis proved that both activation temperatures and types of starting materials were significant in producing activated carbons intended for CO2 capture, since p-value was < 0.05. However, energy penalty and associated environmental problems caused by amine consumptions causes the researchers to shift to other technologies (Saiwan et al., 2013), such as adsorption by activated carbons that will be the focus point in this work.", "mime": "application/pdf"}, {"id": "cet-4660", "words": "3429", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-4660", "date": null, "keywords": "acids; catalyst; concentration; fatty; ffa; hydrolysis; oil; ratio; solvent; temperature; yield", "summary": "This study reports under optimised condition, fatty acids yield was significantly increased and this also showed the potential of Jatropha Curcas oil as feedstock for fatty acids production. 68 78.00 88 98.00 FFA Percentage (%) Response 67.1 98 3. Result & Discussion 3.1 Optimisation of alkaline hydrolysed for increased fatty acids yield.", "mime": "application/pdf"}, {"id": "cet-4661", "words": "3328", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-4661", "date": null, "keywords": "cost; flowrate; process; rec; total; treatment; unit; water", "summary": "The water is either sourced from river via water treatment plant (WTP) and/or freshwater from local authorities. A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Sharifah Rafidah Wan Alwi, Jun Yow Yong, Xia Liu Copyright \u00a9 2015, AIDIC Servizi S.r.l., ISBN 978-88-95608-36-5; ISSN 2283-9216 DOI:10.3303/CET1545254 Please cite this article as: Wan Y.K., Ng D.K.S., 2015, Synthesis and optimisation of total water network via material flow cost accounting (MFCA)-based approach, Chemical Engineering Transactions, 45, 1519-1524 DOI:10.3303/CET1545254 1519 Synthesis and Optimisation of Total Water Network via Material Flow Cost Accounting (MFCA)-Based Approach Yoke Kin Wana,b, Denny K. S. Ng*a a Department of Chemical & Environmental Engineering, The University of Nottingham, Malaysia Campus, Broga Road, 43500 Semenyih Selangor, Malaysia b Crop for the Future Research Centre, The University of Nottingham, Malaysia Campus, Broga Road, 43500 Semenyih Selangor, Malaysia Denny.Ng@nottingham.edu.my Material flow cost accounting (MFCA)-based approach which incorporated prioritisation concept of waste recovery to synthesise and optimise a total water network is presented in this work.", "mime": "application/pdf"}, {"id": "cet-4756", "words": "4098", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-4756", "date": null, "keywords": "carbon; climate; costs; countries; energy; gcf; gtap; model; policy; ppm; target", "summary": "Namely, although addressing climate change is a global challenge, national responsibilities should be differentiated, with developed countries having a heavier burden in both reducing emissions and providing resources for adaptation measures with respect to developing countries. As a mere example, developing countries are now responsible for more than a half of global GHG emissions (Kleme\u0161 and Varbanov, 2013) and they are now asked for actively participating to abatement actions by developed countries.", "mime": "application/pdf"}, {"id": "cet-4757", "words": "3485", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-4757", "date": null, "keywords": "3emt; benchmark; category; consumption; energy; indicators; performance; smes; sustainability; tool", "summary": "For the purpose of developing a branch and country/region specific reference SME, statistical data on energy consumption desegregated by fuels and SMEs value added was obtained in correspondence with the regional/national statistical authorities. However, the success of the follow-up and fine tuning process largely depends on dedication and commitment of the SMEs and their willingness to sustainably change established patterns of energy consumption.", "mime": "application/pdf"}, {"id": "cet-4758", "words": "4288", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-4758", "date": null, "keywords": "assessment; biodiversity; ecosystem; impacts; land; lca; services; species; use", "summary": "Virtually all life cycles, including products in the chemical sector, involve at some tier land operations and emissions leading to changes in the state of biodiversity; however, it is particularly important to take biodiversity impacts into consideration in LCA studies dealing directly with land use and land use change (such as food or bioenergy studies, as in \u010cu\u010dek et al., 2011) \u2013 which currently is scarcely done due to methods not being recognized as stable and mature (Freidberg, 2013). Due to its importance, as identified by the MA, and since it is the most active field today, the rest of this article is devoted to biodiversity impacts from land use only.", "mime": "application/pdf"}, {"id": "cet-4759", "words": "3807", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-4759", "date": null, "keywords": "area; assessment; biodiversity; impact; land; lca; model; richness; sar; species; use", "summary": "A final section studies the implications other models would have in LCA impact assessment models, and propose some open threads that should be addressed in future research. 137 The slope factors for SAR and EAR are significantly different (Storch et al., 2012), but it is also thus far unknown if the two approaches provide different relative distributions of LCA characterization factors on a pixel-per-pixel basis.", "mime": "application/pdf"}, {"id": "cet-4760", "words": "4025", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-4760", "date": null, "keywords": "coal; consumption; cost; energy; lca; production; resources; table; tec", "summary": "[TJ/total production of hard coal] (CSO 2012a) and their thermo-ecological cost Energy carriers inputs 2008 2009 2010 2011 TEC Steam coal 13,424 8,576 2,104 2,012 1.31 High - methane natural gas 407 494 809 877 1.15 Peat and wood 0 87 57 39 0.01 Motor gasoline 22 18 19 18 2.08 Automotive diesel oil 456 484 560 602 1.24 Light fuel oil 21 23 37 22 1.65 Coke oven gas 136 126 142 144 1.92 Electricity 15 461 15 291 15 669 15 550 4.72 Heat 4 279 4 542 5 108 4 299 2.29 Table 5: Selected material consumption in hard coal mines in Poland in the years 2008-2011 [Mg/total production of hard coal] (CSO 2012b) and their thermo-ecological cost [ The obtained results indicate, that from the point of view of improvement of ecological effectiveness of hard coal mine, the energy subsystem should be examined firstly.", "mime": "application/pdf"}, {"id": "cet-4761", "words": "2947", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-4761", "date": null, "keywords": "line; plant; process; pwtp; recirculation; sludge; treatment; water", "summary": "Water treatment plants that employ the conventional processes of coagulation, flocculation and sedimentation produce large quantities of sludge and Qasim et al., (2006) suggested that the volume of generated sludge can be as high as 2 % of the total volume of water treated, and the use of water treatment plant sludge for various industrial and commercial manufacturing processes has been seen in most part of the world including the USA and the UK (Victoria, 2013), hence as studied previously (Anyakora et al, 2012) asserted mineralogical composition of the water treatment sludge being close to that of clay, which therefore encourages the use of water treatment sludge in brick manufacture. Evaluation of water treatment sludge for ameliorating acid mine waste.", "mime": "application/pdf"}, {"id": "cet-4762", "words": "3921", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-4762", "date": null, "keywords": "al13; aluminium; ferron; method; nmr; pac; solution; species; water", "summary": "Many analytical instruments and experimental methods, such as potential titration, 27 Al nuclear magnetic resonance (NMR), X-ray powder diffraction (XRD), small angle X-ray diffraction and scattering, infrared and Raman spectroscopy, laser light scattering, electron microscopy, atomic force microscopy, Al-Ferron colorimetry and other wet chemical methods, have been employed in the study of Al speciation and the structural characterization of Al species. Al species in the electrolyte were analyzed at the end of the electrolytic process.", "mime": "application/pdf"}, {"id": "cet-4763", "words": "3526", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-4763", "date": null, "keywords": "adsorption; materials; removal; surface; tio2", "summary": "A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Neven Dui\u0107 Copyright \u00a9 2014, AIDIC Servizi S.r.l., ISBN 978-88-95608-33-4; ISSN 2283-9216 DOI:10.3303/CET1442027 Please cite this article as: Ananpattarachai J., Kajitvichyanukul P., 2014, Adsorption and degradation of 2-chlorophenol by TiO2/AC and TiO2/CB in photocatalytic process, Chemical Engineering Transactions, 42, 157-162 DOI:10.3303/CET1442027 157 Adsorption and Degradation of 2-Chlorophenol by TiO2/AC and TiO2/CB in Photocatalytic Process Jirapat Ananpattarachai, Puangrat Kajitvichyanukul* Center of Excellence on Environmental Research and Innovation, Faculty of Engineering, Naresuan University, Phitsanulok 65000, Thailand puangratk@nu.ac.th In this work, carbonaceous materials including activated carbon (AC) and carbon black (CB) were used in an enhancement the adsorption capacity of TiO2 particles. Both AC and CB were used in the enhancement the adsorption capacity of TiO2 particles.", "mime": "application/pdf"}, {"id": "cet-4764", "words": "4017", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-4764", "date": null, "keywords": "bed; film; flow; light; rate; tio2; total; wastewater", "summary": "This paper reported the innovative aspect in using N-doped thin film titania as catalyst under visible light irradiation in fixed bed photocatalytic process for industrial wastewater. Introduction A fixed bed photocatalytic reactor incorporating TiO2 catalyst and UV radiation was widely investigated for its performance in photocatalytic destruction of organic contaminants in fixed bed reactors (Nogueira and Jardim, 1996) and thin film variation (Noorjahan et al., 2003).", "mime": "application/pdf"}, {"id": "cet-4765", "words": "2990", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-4765", "date": null, "keywords": "acsp; adsorbent; adsorption; carbon; dosage; phenol; removal; sugar", "summary": "Sugar beet pulp carbon obtained from different methods to use as an adsorbent was studied for removing heavy metals in earlier works, such as (Aksu and \u0130\u015fo\u011flu, 2005) on Copper removal, as well as Cadmium (\u00d6zer and T\u00fcmen, 2005), Chromium; Altundo\u011fan, 2005) and phenol (Beker et al., 2010).There are also some studies of phenol adsorption by sugar beet pulp carbon, but little attention has been paid to the investigation of pH, adsorbent dosage, phenol concentration, temperature and contact times dependence of adsorption process and evaluating equilibrium, and kinetic parameters of the system, which are important in the design of treatment systems (Dursun et al., 2005). At basic pH (>7), phenol adsorption became difficult due to the repulsion of the accumulation for negatively charged hydroxyl ions around the adsorbent surface.", "mime": "application/pdf"}, {"id": "cet-4766", "words": "4092", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-4766", "date": null, "keywords": "ach; coagulant; decolourisation; dosage; efficiency; textile; wastewater", "summary": "Hence, to protect the water environment, textile wastewater must be treated up to the safe discharge limits as recommended by USEPA. The main advantage of coagulation/flocculation method is that the decolourisation of textile wastewater can be achieved through the removal of dye molecule present in the wastewater, and not by partial decomposition of dyes, which 176 could produce potentially harmful and toxic aromatic compounds (Golob et al., 2005).", "mime": "application/pdf"}, {"id": "cet-4767", "words": "2978", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-4767", "date": null, "keywords": "cesium; ferrocyanide; figure; particles; pbas; resistance; samples", "summary": "Figure 3: XRD patterns of typical samples obtained in this work Figure 4: Nitrogen adsorption-desorption isotherms (77 K) of a typical sample insolubilized by Fe 2+ Figure 5 shows the cesium adsorption isotherms of samples, in which different cations were used to insolubilize the ferrocyanide included in them. Results and discussion Figure 2 shows photographs and cross sectional SEM images of typical samples obtained in this work.", "mime": "application/pdf"}, {"id": "cet-4968", "words": "3061", "extension": ".htm", "flesch": "50", "author": "Veronesi, D.; Ida, A.; D\u2019Imporzano, G.; Adani, F.", "title": "Microalgae Cultivation: Nutrient Recovery from Digestate for Producing Algae Biomass", "date": "2015", "keywords": "biomass; growth; l-1; medium; microalgae; production", "summary": "The results show that microalgal biomass production offers real opportunities for addressing issues such nutrient recovery from wastewater streams and CO2 sequestration, and the resulting biomass could be employed as biofertilizer or to produce added-value organic chemicals as new raw materials. Ras, M. et al., 2011.", "mime": "application/pdf"}, {"id": "cet-4969", "words": "3084", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-4969", "date": null, "keywords": "absorption; biogas; co2; column; flow; pressure; temperature; upgrading; water", "summary": "Bottoms R. R., 1930, Separating acid gases, U.S. Patent 1783901 Budzianowski M.W., 2011, Benefits of biogas upgrading to biomethane by high-pressure reactive solvent scrubbing, Biofuels Bioprod. Rasi S., Veijanen A., Rintala J., 2007, Trace compounds of biogas from different biogas production plants.", "mime": "application/pdf"}, {"id": "cet-4970", "words": "3268", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-4970", "date": null, "keywords": "analysis; assessment; case; process; risk; risk assessment; safety; scope; software; task", "summary": "A barrier for small and medium enterprises (SMEs) DOI: 10.3303/CET1543203 Please cite this article as: Leva M.C., Naghdali F., Balfe N., Gerbec M., Demichela M., 2015, Remote risk assessment: a case study using scope software, Chemical Engineering Transactions, 43, 1213-1218 DOI: 10.3303/CET1543203 1213 to such use of risk assessment can be the access needed to risk assessment expertise. 1 Introduction Current techniques of risk assessment aim to take into account also human and organizational factors, as suggested by NORSOK Z-013.", "mime": "application/pdf"}, {"id": "cet-4971", "words": "2692", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-4971", "date": null, "keywords": "accident; analysis; causes; prevention; risk; root; safety; work", "summary": "Since the limited knowledge of accident root causes, slapdash remedies, and occasional inspections are clearly inadequate to highlight and control the criticalities of complex activities, the first target should be an unbiased analysis of the causal chain of events that led to the accident. So far the availability of statistical accident databases has stimulated numerous attempts of manipulations, both in a numerical and keyword approach, some of them producing real interesting results (e.g. based on analysis with clustering algorithms, fuzzy logic or statistical learning algorithms inspired by biological neural networks (Demichela et al, 2007).", "mime": "application/pdf"}, {"id": "cet-4972", "words": "3870", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-4972", "date": null, "keywords": "approach; base; clustering; clusters; data; ensemble; matrix; number", "summary": "The number M of clusters of final ensemble clustering is selected according to the values of Silhouette for different numbers of clusters Ccandidate that span the interval [2,16], where the lower bound (2) is the minimum number of base clusters (see Table 1), whereas the upper bound (16) is the number of the largest combination of the three base clusters (i.e., 2x2x4): the optimum number of clusters C* in the final ensemble clustering is the value at which the Silhouette value is maximized, i.e., C* =6 (star in Figure 4 (left)). Vega-Pons S., Ruiz-Shulcloper J., 2011, A survey of clustering ensemble algorithms, International Journal of Pattern Recognition and Artificial Intelligence, 25(03), 337-372.", "mime": "application/pdf"}, {"id": "cet-4973", "words": "4022", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-4973", "date": null, "keywords": "assessment; factors; importance; level; model; risk; safety; sub; value", "summary": "They do this using linguistic DOI: 10.3303/CET1543206 Please cite this article as: Djapan M., Macuzic I., Tadic D., Jeremic B., 2015, Influence of hot factors on risk assessment level based on fuzzy set theory, Chemical Engineering Transactions, 43, 1231-1236 DOI: 10.3303/CET1543206 1231 expressions, which reflects the human way of thinking. Introduction Nowadays, risk management and risk assessment have become very popular and much used terms.", "mime": "application/pdf"}, {"id": "cet-4974", "words": "2465", "extension": ".pdf", "flesch": "33", "author": null, "title": "cet-4974", "date": null, "keywords": "accident; cheese; errors; human; manual; model; safety", "summary": "Sequential, Epidemiological, Systematic and Dynamic Sequential Models (DSAMs) are main classes of accident models as reported by the Al-Shanini et al (2014), and illustrated in the Figure 1. DOI: 10.3303/CET1543207 Please cite this article as: Ahmad M., Pontiggia M., 2015, Modified swiss cheese model to analyse the accidents, Chemical Engineering Transactions, 43, 1237-1242 DOI: 10.3303/CET1543207 1237 Figure 1: Accident model classification 2.", "mime": "application/pdf"}, {"id": "cet-4975", "words": "3380", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-4975", "date": null, "keywords": "area; assessment; atex; classification; cream; hep; human; method; risk", "summary": "As shown in Section 4, also for ATEX risk assessment, the assumption that operators and maintainers are constantly able to operate in a correct way can lead to area classifications that could not be conservative enough. Application of FUZZY CREAM FUZZY CREAM tool was applied to a case study from a food manufacturing company, which produced food stabilizers, ingredients, starches and gums.", "mime": "application/pdf"}, {"id": "cet-4976", "words": "3895", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-4976", "date": null, "keywords": "analysis; assessment; collision; control; design; human; interaction; phri; risk; robot; safety; system", "summary": "Although, all above mentioned approaches can be useful in keeping human robot interaction safe, their insufficient information of human bio-mechanics about the power of the human body weaken their efficiency. Hence, surveys in the area of human robot cooperation requires to be considered from the safety and risk assessment points of view as well as system control prospective.", "mime": "application/pdf"}, {"id": "cet-4977", "words": "2022", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-4977", "date": null, "keywords": "accidents; analysis; data; figure; prevention; risk", "summary": "The running work is now the application of the revised model to the new set of occupational accidents data, and namely: The activities are here introduced with their early results related to: a) the analysis of large database of occupational accidents, with the aim of identifying, through the clustering of similar events, the more critical features to be used in risk assessment and prevention; b) the in-depth analysis of occupational accidents, that through a combination of Event Tree and Fault Tree Analysis, leads to focus step by step the intermediate and root causes of work-related accidents; c) the collection, classification and analysis of unsafe acts and unsafe conditions as precursors of occupational accidents, in order to identify the measures to be adopted to minimize their recurrence.", "mime": "application/pdf"}, {"id": "cet-4978", "words": "2952", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-4978", "date": null, "keywords": "accident; analysis; clustering; data; level; method; number", "summary": "The method has been applied successfully to a data base of occupational accident with the purpose of grouping the element according with their similarity and making a clear visualisation of this classification. The systematic reporting and collecting of occupational accidents in an organised data base represent a measurement of the safety level of a system and not only a collection of single events.", "mime": "application/pdf"}, {"id": "cet-4979", "words": "3168", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-4979", "date": null, "keywords": "accidents; analysis; errors; factors; hfacs; human; safety; system; wcm", "summary": "The application of taxonomy HFACS allows to understand the general trends of human errors in a structured way to identifying the causes of an accident, but only represents the first step in the analysis of the problem. The systematic consideration of human error in the design, operation, and maintenance of highly complex systems can lead to improve safety and achieve more efficient operation.", "mime": "application/pdf"}, {"id": "cet-5075", "words": "3605", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-5075", "date": null, "keywords": "chloride; compounds; dbt; des; formation; interactions; simulations; tbp", "summary": "In order to explore the molecular interactions and possible complexation in phosphonium based DES, we further study radial distribution functions between different components. Oman farouqsm@yahoo.com Our experiments on desulfurization of liquid fuels reveals suitability of novel type I deep eutectic solvents (DES) as potential solvents for thiophenic compounds.", "mime": "application/pdf"}, {"id": "cet-5076", "words": "3825", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-5076", "date": null, "keywords": "angle; bond; contact; detachment; number; phase; surface; wall", "summary": "We also show the first numerical determination of critical Bond numbers as a function of static contact angle by phase-field simulation. In addition, results of 3D simulations are compared to critical Bond numbers from a static stability analysis based on a numerical integration of the Young-Laplace equation.", "mime": "application/pdf"}, {"id": "cet-5077", "words": "3173", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-5077", "date": null, "keywords": "biodiesel; chemical; data; equilibrium; liquid; phase; systems; work", "summary": "Representative binary and ternary experimental data of phase equilibrium for systems containing components present in biodiesel production were selected to validate the methodology. Rossi C.C.R.S., Cardozo-Filho L., Guirardello R., 2009, Gibbs free energy minimization for the calculation of chemical and phase equilibrium using linear programming, Fluid Phase Equil.", "mime": "application/pdf"}, {"id": "cet-5078", "words": "3090", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-5078", "date": null, "keywords": "equilibrium; mixtures; phase; \u03b4hf", "summary": "The results are described in form of phase diagrams for binary mixtures and surfaces of equilibrium for ternary mixtures, where the equilibrium data and the parameters model was calculated based in the square errors, that are nearly of the experimental data. DOI: 10.3303/CET1543311 Please cite this article as: Rocha S., Silva L., Boros L., Krahenbuhl M.A., Guirardello R., 2015, Development of thermodynamic models and parameters determination of solid liquid equilibrium for binary and ternary fatty acids and esters, Chemical Engineering Transactions, 43, 1861-1866 DOI: 10.3303/CET1543311 1861 The correct determination of phase formation is indispensable for discovery the solid-liquid equilibrium, specifically because important points, like eutectic and peritetic points, which thermodynamic models needs to be capable to represent, more than this, needs to identify when this behavior is present (Inoue et al, 2004 a).", "mime": "application/pdf"}, {"id": "cet-5079", "words": "2710", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-5079", "date": null, "keywords": "activity; contribution; experimental; group; nrtl; parameters", "summary": "Generally the models using molecular interaction parameters lead to more accurate results compared to models using group interaction parameters like the GC-NRTL or UNIFAC. Table 1: Binary group interaction parameters for GC-NRTL model CH3 CH2 CH C ACH AC ACCH3 ACCH2 (CH2)cycl CH=CH CH3 0.00 217.95 757.72 -153.57 -10.17 -62.40 -0.33 -1180.85 153.78 1017.48 CH2 119.29 0 .00", "mime": "application/pdf"}, {"id": "cet-5080", "words": "2467", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-5080", "date": null, "keywords": "0,0; ethanol; liquid; nrtl; solubility; water", "summary": "Clearly the obtained results showed large deviations with the experimental values, indicating the non reliability of this model to retrieve solubility data for these system types. The use of NRTL for the modelling of solid-liquid equilibria for different ternary systems led to results in a quite good agreement with the corresponding experimental values reported from the literature.", "mime": "application/pdf"}, {"id": "cet-5081", "words": "2737", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-5081", "date": null, "keywords": "activity; coefficients; cosmo; methanol", "summary": "Data of experimental activity coefficients (\u03b3 ) obtained from literature (Soujanya et al., 2010) were compared with calculated values (\u03b3 ) by two different methods. The mean absolute deviation (MAD) between the experimental and calculated values of activity coefficients was obtained Eq(1): (%)", "mime": "application/pdf"}, {"id": "cet-5082", "words": "3174", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5082", "date": null, "keywords": "ammonia; diffusers; landfill; leachate; load; nitrogen; reactor; scale", "summary": "Even though compositions and concentrations of landfill leachate vary depending on the kind of waste received, landfill age, location and climate, operation technology, there are some common features of municipal landfill leachate. Moreover, the ultrafiltration membranes are coupled with the biological system with the optional use both as membrane biological reactor (MBR) and as tertiary treatment (TT) after the secondary clarifier.", "mime": "application/pdf"}, {"id": "cet-5083", "words": "3938", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-5083", "date": null, "keywords": "assessment; chemical; effects; explosion; fire; hazard; premises; safety; substances; workplace", "summary": "Fire and explosion safety in workplaces, buildings and premises is a major concern of European legislation, in particular through the ATEX Directives 1994/9/EC (1994) and 1999/92/EC (1999). Inspect: a new method for fire safety in existing premises.", "mime": "application/pdf"}, {"id": "cet-5084", "words": "3688", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5084", "date": null, "keywords": "bank; carbon; carbon dioxide; co2; dioxide; dry; ice; ice bank; release; sublimation", "summary": "DOI: 10.3303/CET1543317 Please cite this article as: Mocellin P., Vianello C., Maschio G., 2015, Carbon capture and storage hazard investigation: numerical analysis of hazards related to dry ice bank sublimation following accidental carbon dioxide releases, Chemical Engineering Transactions, 43, 1897-1902 DOI: 10.3303/CET1543317 DOI: 10.3303/CET1543317 Please cite this article as: Mocellin P., Vianello C., Maschio G., 2015, Carbon capture and storage hazard investigation: numerical analysis of hazards related to dry ice bank sublimation following accidental carbon dioxide releases, Chemical Engineering Transactions, 43, 1897-1902 DOI: 10.3303/CET1543317 1897 This occurrence is surely found in the case of releases from a buried CCS pipeline and is very common given that a large part of the piping will be placed under the ground.", "mime": "application/pdf"}, {"id": "cet-5085", "words": "4356", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-5085", "date": null, "keywords": "assessment; cities; city; development; energy; future; impact; need; projects; smart; sustainability", "summary": "Given the importance of the assessment process, we want to recognize the contribution of smart cities in the resolution of outstanding issues with regard to valuation procedures. The Italian geography of smart cities and territories The major cities (Milan, Turin, Genoa, Bari, Florence) have defined a process for making smart-labeling system to existing and new projects.", "mime": "application/pdf"}, {"id": "cet-509", "words": "2925", "extension": ".htm", "flesch": "46", "author": "Bavasso, Irene; Verdone, Nicola; Di Palma, Luca", "title": "Cr(VI) Removal by Green-Synthetized Iron-Based Nanoparticles: Effect of Cr(VI) Concentration and pH Condition on Adsorption Process ", "date": "2018", "keywords": "adsorption; concentration; cr(vi; l-1; nmg; removal", "summary": "The most efficient and rapid technology for the removal of Cr(VI) from industrial polluted wastewaters is represented by a combination of chemical reduction, precipitation and adsorption processes. In the case of high Cr(VI) concentration (20 mg L-1), the effect of nanoparticle dimension was relevant in which low nanoparticle size (44.1 nm) of nMG corresponded to a high adsorption capacity.", "mime": "application/pdf"}, {"id": "cet-510", "words": "3515", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-510", "date": null, "keywords": "adsorption; cross; linker; mip; molecule; percentage; polymer; sterol; template", "summary": "The performance in sterol adsorption of MIPs synthesized under various conditions was investigated using a model solution of sterol mixture in n-heptane with initial concentration of 1.40\u00d710-4 kg/kg-solution comparing with non-imprinted polymer (NIP). Batch adsorption was performed to evaluate the performance of the obtained MIPs in sterol adsorption using a model solution of sterol mixture in n-heptane comparing with non-imprinted polymer (NIP).", "mime": "application/pdf"}, {"id": "cet-511", "words": "3660", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-511", "date": null, "keywords": "consumption; energy; energy consumption; gasification; nitrogen; oxygen; oxygen purity; process; unit", "summary": "The model RK-BM is chosen as the physical property method of gasification process. Therefore, whether the composition of the syngas from the liquid-nitrogen washing process reaches the industrial requirements is an important reference index for the smooth operation of the ammonia production from coal process.", "mime": "application/pdf"}, {"id": "cet-512", "words": "3361", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-512", "date": null, "keywords": "air; cooler; cooling; cws j; network; sac j; water", "summary": "Taking into account the increase of concentration ratio of circulating water, Panjeshahi and Ataei (2008) optimized cooling water networks for the purpose of reducing energy and water consumption, by way of a novel technique called the integrated ozone treatment cooling system design based on pinch analysis and mathematical programming, producing the optimization results with minimum cost and environmental impact, as well as maximum energy and water conservation as objective functions. Besides, Shenoy and Shenoy (2013) put forward the unified targeting algorithm and nearest-neighbours algorithm which could be applied to optimize cooling water networks in the proposition that the heat duty was translated into supply-demand relationship between inlet and outlet.", "mime": "application/pdf"}, {"id": "cet-513", "words": "4063", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-513", "date": null, "keywords": "acid; degradation; growth; model; msm; pit; rate; sanitation; serratia; strain; time; water", "summary": "The relationship between bacterial growth and butyric acid degradation were investigated. The growth of and butyric acid degradation by Serratia marcescen was conducted at 30 oC, pH 7 and agitation rate of 110 rpm for incubation period of 24 h.", "mime": "application/pdf"}, {"id": "cet-514", "words": "3406", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-514", "date": null, "keywords": "accumulator; biomass; chp; electricity; energy; heat; tank", "summary": "As for the primary energy savings in scenario A, with the heat rejected, the integration of an accumulator tank makes it possible to increase CHP heat utilisation and decrease natural gas consumption. The target level for the share of CHP electricity in gross electricity consumption was 20 % for 2020.", "mime": "application/pdf"}, {"id": "cet-515", "words": "3430", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-515", "date": null, "keywords": "emission; freight; goods; lorry; mode; rail; ship; transport", "summary": "The next step of this study is to identify the equation in defining the relationship between air emission and the amount of goods to be transported by different transport modes. However, the transport modes with lower GHGs emission do not necessary produce lower emission of air pollutants.", "mime": "application/pdf"}, {"id": "cet-516", "words": "3211", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-516", "date": null, "keywords": "energy; figure; footprint; hoekstra; production; publications; research; water", "summary": "Yousefi M., Khoramivafa M., Damghani A.M., 2017, Water footprint and carbon footprint of the energy consumption in sunflower agroecosystems, Environmental Science and Pollution Research, 24(24), 19827- 19834. Zhang F., Zhan J., Li Z., Jia S., Chen S., 2017a, Impacts of urban transformation on water footprint and sustainable energy in Shanghai, China, Journal of Cleaner Production, DOI: 10.1016/j.jclepro.2017.08.157.", "mime": "application/pdf"}, {"id": "cet-517", "words": "2431", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-517", "date": null, "keywords": "control; exchanger; fouling; heat; hen; process; transfer", "summary": "The correlation expressed by Eq(3) can be corrected by adjusting new values of constant A, b, n, e using the measurement data for heat exchanger in clean condition (Rf=0). Figure 2: Theoretically assumed (curve 1) and numerically reproduced (curve 2) variation of the thermal resistance of fouling in time for heat exchanger No. 11 from Figure 5 (Markowski et al., 2013) 4.", "mime": "application/pdf"}, {"id": "cet-518", "words": "2808", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-518", "date": null, "keywords": "cals; chemical; condensate; figure; steam; supply; system; treatment; water", "summary": "Quality and cost value of the final product, as well as the service life of the equipment and industrial safety level, depend on the efficiency of water management systems. For example, technically prepared or demineralized water can be used for distillation; cooling is carried out with circulating water; heating \u2013 with water vapour and the drainage can enter either the system of water treatment or the sewage collection system.", "mime": "application/pdf"}, {"id": "cet-519", "words": "3885", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-519", "date": null, "keywords": "anaerobic; biowastes; digestion; energy; hygienization; pretreatment; production; sludge; thermal", "summary": "Nevertheless, the results are not always positive when it comes to the digestive tract content, the grease trap sludge (Luste et al., 2009), the primary sludge and the digested WAS (Nazari et al., 2017), the slaughterhouse by-products (Hejnfelt and Angelidaki, 2009), the codigestion of slaughterhouse waste with food waste (Grim et al., 2015), and the dewatered manure (Rafique et al., 2010). Hong et al., 2004 7.27 kJ\u2219g TS-1, 85 \u00b0C Primary sludge 6.8 log10 of Fecal coliform 11.4 kJ\u2219g TS-1, 85 \u00b0C WAS 6.5 log10 of Fecal coliform 10.1 kJ\u2219g TS-1, 65 \u00b0C AD sludge 5.6 log10 of Fecal coliform Hong et al., 2006 4.86 kJ\u2219g TS-1, 65 \u00b0C 7.60 kJ\u2219g TS-1, 65 \u00b0C Primary sludge WAS ~5.6 log10 of Fecal coliform ~5.4 log10 of Fecal coliform 10.1 kJ\u2219g TS-1, 65 \u00b0C AD sludge ~3.5 log10 of Fecal coliform", "mime": "application/pdf"}, {"id": "cet-520", "words": "3257", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-520", "date": null, "keywords": "cold; cost; cycle; efficiency; energy; gas; heat; lng; optimization; table", "summary": "Messineo A., Pann G., 2011, LNG cold energy use in agro-food industry: a case study in Sicily. Franco A., Casarosa C., 2015, Thermodynamic analysis of direct expansion configurations for electricity production by LNG cold energy recovery, Applied Thermal Engineering, 78, 649\u2013657.", "mime": "application/pdf"}, {"id": "cet-5289", "words": "2693", "extension": ".htm", "flesch": "50", "author": "Frechen, F.-B.; Romaker, J.; Giebel, S.", "title": "Controlling Chemical Dosing into Sewers for Odour and Corrosion Abatement", "date": "2014", "keywords": "control; dosing; liquid; measurement; odour; sewer; sulphide", "summary": "Here, it is necessary to measure in analogy to the OEC measurement method, thus an electronic nose has to be used to determine the \u201codorants concentration in the liquid in ouE/m3 liquid\u201d 2.2 Measurement device hardware \u2013 the sulphide and odour measurement unit SOU As mentioned, liquid has to be withdrawn from the sewer and has to be analyzed by an automated device that is able to perform sulphide and OEC measurement in order to deliver relevant quality parameters for the intended closed loop control strategy. One is dedicated for sulphide measurement in analogy with DIN 38409-29 (2003), thus lowering pH-value of the sample from the sewer, and H2Sg in the off-gas of this stripping reactor is the responsible signal and is converted into \u201csulphide in liquid concentration in mg/L\u201d.", "mime": "application/pdf"}, {"id": "cet-5290", "words": "3315", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-5290", "date": null, "keywords": "advanced; biofilter; data; inlet; odour; outlet; plant", "summary": "In this work we have conducted an assessment of the performance of 3 Advanced Biofilters used for the treatment of odour emissions and removal of VOCs from: a) an Animal Waste Rendering Plant in Hamar, Norway (where an Advanced Biofilter was installed in 2008 that has successfully minimized important odour-related problems) b) a Municipal Waste Water Treatment Plant in Middelfart, Denmark (treating an emission of 1,500m3/h) c) a WWTP sludge Composting Plant in Mallorca, Spain. Thus, several parameters were measured at the inlet and at the outlet of such biofilters: odour concentration was measured by means of dynamic olfactometry in order to determine their odour reduction efficacy.", "mime": "application/pdf"}, {"id": "cet-5291", "words": "2925", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-5291", "date": null, "keywords": "air; bubble; concentration; dms; flow; gas; ozone; reactor; removal", "summary": "Figure 2 Breakthrough curves (Concentration vs. time) of DMS: A, different concentrations; B, different injection depth of gas; C, different air flow rate; D, with or without magnetic stirrer. Reaction 2 Figure 3 Removal efficiency of DMS under different processing conditions Figure 4 Examples of DMS concentration (m/z 63) when inject ozone and the fluctuation of dissolved ozone in the bubble reactor.", "mime": "application/pdf"}, {"id": "cet-5292", "words": "3368", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-5292", "date": null, "keywords": "adsorbent; adsorption; equilibrium; phenol; removal; ssba", "summary": "238 Figure 3: (a) Freundlich isotherm representation for the adsorption of phenol onto SSBA (T= 20, 30 and 55\u00b0C; t = 3 h; C0 = 40-200 mg.l-1) (b) Plot of the pseudo second-order kinetic for the adsorption of phenol onto SSBA (T= 20\u00b0C; t= 3 h) Table 2: Langmuir and Freundlich isotherm parameters for phenol adsorption at 20,30 and 55 \u00b0C T (\u00b0C) Langmuir isotherm Freundlich isotherm Qm (mg.g\u22121) b (l.mg\u22121) R2 RL kF 236 3.2 Effect of contact time and initial phenol concentration", "mime": "application/pdf"}, {"id": "cet-5293", "words": "2970", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-5293", "date": null, "keywords": "air; analysis; concentration; pig; sampling; ventilation", "summary": "3. Results and discussion 3.1 Precision Figure 3: Concentration of dimethyl sulfide in room ventilation air measured by PTR-MS (empty circles) and GC-SCD (full circle) with standard deviation (n around 40 and n=3, respectively) Figure 4: Concentration in room ventilation air (\u00b5g/m\u00b3) (a) and emission (g/h) (b) of dimethyl sulfide, p- cresol and propanoic acid over one week of measurements.", "mime": "application/pdf"}, {"id": "cet-5294", "words": "2602", "extension": ".pdf", "flesch": "37", "author": null, "title": "cet-5294", "date": null, "keywords": "dispersion; emission; measurement; odor; sampling; sources; uncertainties; use", "summary": "It is suggested that in cases where storage over 4 hours is unavoidable, some preliminary measurements would be taken to assess the loss expected during storage and then use a correction factor to minimize underestimations of odor emissions. Although multiple sources of uncertainty are associated with each step in the process of odor sampling \u2013 quantification \u2013 dispersion modeling, the need to rely on actual odor measurement with human panelists remains the preferred approach for many environmental regulators and emission sources operators.", "mime": "application/pdf"}, {"id": "cet-5295", "words": "2918", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-5295", "date": null, "keywords": "air; laboratory; odorants; odour; olfactometry; pig; slurry", "summary": "At each repetition the concentrations of chemical odorants were measured by PTR-MS and odour concentration by dynamic olfactometry in the mobile laboratory. Table 1: Average concentrations of chemical odorants (ppbv) measured by PTR-MS at abatement technologies installed at pig houses with growing-finishing pigs along with odour activity value (\u2211OAV) and odour concentrations measured by dynamic olfactometry (OU/m3).", "mime": "application/pdf"}, {"id": "cet-5296", "words": "3129", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-5296", "date": null, "keywords": "aroma; array; data; hen; nose; quality; sample; section; sensors; tea", "summary": "Tea sample (50 ml) was taken in a Sample Chamber. Figure 3: Flow chart of the statistical correlation algorithm used for Aroma Score Generation of Tea sample under test 4.", "mime": "application/pdf"}, {"id": "cet-5297", "words": "2711", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-5297", "date": null, "keywords": "compounds; concrete; flowers; fragrance; jasmine; jasminum; tgs; time", "summary": "Being an export commodity, ideal blossoming time and quality testing of jasmine flowers are extremely crucial matters in exportation of flowers and concrete. Hence, there is a need for an automated, portable, low-power, easy-to use and reliable machine, which can evaluate quality objectively and repetitively, so that it can assist the Floriculture Industry, research laboratories and flower exporters for final evaluation of jasmine flower and its concrete quality.", "mime": "application/pdf"}, {"id": "cet-5298", "words": "3459", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-5298", "date": null, "keywords": "burning; classification; data; detection; fire; nose; sensors; smell; system", "summary": "Determination of burning smell is important because it can help in early fire detection and prevention. Almost all the cases of fire can be prevented if the existing fire detection system is improved with reliable hardware incorporated with effective algorithm for early fire detection and prevention.", "mime": "application/pdf"}, {"id": "cet-5299", "words": "3963", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-5299", "date": null, "keywords": "data; dispersion; german; impact; odour; planning; poland; procedures; protection; waste; zones", "summary": "Other odour dispersion models cover a wider geographical range (Yu et al., 2009). 280 Figure 1: Emission rates from the G\u0142uch\u00f3w agricultural biogas plant The technological alternatives refer to the technological chain units, which are most sensitive to the increase of odour impact: 1) the change of substrates to those having a bigger odour impact; 2) employment of a less airtight technology; 3) technology change, e.g. from wet to dry fermentation.", "mime": "application/pdf"}, {"id": "cet-5300", "words": "2666", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-5300", "date": null, "keywords": "air; compounds; house; laboratory; measurements; model; temperature; vocs", "summary": "Compounds are identified using available databases or substances library stored in a computer based on used column (DB5) and the Kovats index. For example, from building materials, household products, human activities, cleaning, smoking, or industrial emissions, exhaust from vehicles are some of the anthropogenic sources of VOCs in the outdoor environment which contribute to indoor VOCs.", "mime": "application/pdf"}, {"id": "cet-5395", "words": "3424", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-5395", "date": null, "keywords": "absorption; chemical; composites; fibres; hemp; hurds; properties; water", "summary": "Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 39, 2014 A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Peng Yen Liew, Jun Yow Yong Copyright \u00a9 2014, AIDIC Servizi S.r.l., ISBN 978-88-95608-30-3; ISSN 2283-9216 DOI: 10.3303/CET1439094 Please cite this article as: Stevulova N., Cigasova J., Purcz P., Schwarzova I., 2014, Long-term water absorption behaviour of hemp hurds composites, Chemical Engineering Transactions, 39, 559-564 DOI:10.3303/CET1439094 559 Long-Term Water Absorption Behaviour of Hemp Hurds Composites Nadezda Stevulovaa*, Julia Cigasovaa, Pavol Purcza, Ivana Schwarzovaa a Faculty of Civil Engineering, Technical University of Ko\u0161ice, Vysoko\u0161kolska 4, 042 00 In this paper, the study of long-term water storage of hemp hurds composites at room temperature was made.", "mime": "application/pdf"}, {"id": "cet-5396", "words": "3059", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-5396", "date": null, "keywords": "benzene; tio2", "summary": "To further increase the performance of the gas-phase photocatalytic fluidized bed reactor, TiO2 based catalysts could be directly supported on material transparent to ultraviolet radiation. Gas phase selective photocatalytic oxidation of cyclohexane was studied in a two dimensional fluidized bed reactor on MoOx catalysts supported on grafted TiO2/SiO2.", "mime": "application/pdf"}, {"id": "cet-5397", "words": "2695", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-5397", "date": null, "keywords": "r r; spray; u u; wall; \uf0b6 \uf0b6", "summary": "Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 39, 2014 A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Peng Yen Liew, Jun Yow Yong Copyright \u00a9 2014, AIDIC Servizi S.r.l., ISBN 978-88-95608-30-3; ISSN 2283-9216 DOI:10.3303/CET1439096 Please cite this article as: Patniboon A., Ponpesh P., Soottitantawat A., Arpornwichanop A., 2014, Theoretical analysis of the wall deposition of particles in spray dryers, Chemical Engineering Transactions, 39, 571-576 DOI:10.3303/CET1439096 571 Theoretical Analysis of the Wall Deposition of Particles in Spray Dryers Artitaya Patniboon, Pimporn Ponpesh, Apinan Soottitantawat, Amornchai Arpornwichanop* Computational Process Engineering Research Unit, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330, Thailand Amornchai.a@chula.ac.th A spray drying is an important process in food, healthcare and pharmaceutical industries. In spray dryers, a liquid-product feed is first atomized by an atomizer and the obtained liquid droplet is then contacted with hot dried air.", "mime": "application/pdf"}, {"id": "cet-5398", "words": "3024", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-5398", "date": null, "keywords": "absorption; aspen; co2; k2co3; mol; piperazine; plus", "summary": "Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 39, 2014 A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Peng Yen Liew, Jun Yow Yong Copyright \u00a9 2014, AIDIC Servizi S.r.l., ISBN 978-88-95608-30-3; ISSN 2283-9216 DOI: 10.3303/CET1439097 Please cite this article as: Arshad M., Wukovits W., Friedl A., 2014, Simulation of CO2 absorption using the system K2CO3- piperazine, Chemical Engineering Transactions, 39, 577-582 DOI:10.3303/CET1439097 577 Simulation of CO2 Absorption Using the System K2CO3- Piperazine Muazzam For CO2 absorption from biogas, aqueous K2CO3 and piperazine solvents are used independently and then ultimately in a combination.", "mime": "application/pdf"}, {"id": "cet-5399", "words": "3018", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5399", "date": null, "keywords": "concentration; energy; ethanol; evaporation; lignin; precipitation; process", "summary": "Samples were taken repeatedly for lignin concentration measurement by UV/Vis spectroscopy. For the evaporation process case, the change in ethanol concentration was simulated as described above.", "mime": "application/pdf"}, {"id": "cet-54", "words": "15515", "extension": ".pdf", "flesch": "41", "author": "Klemes, J.J.; Varbanov, P.S.; Lam, H.L.", "title": "Twenty Years of PRES: Past, Present and Future \u2013 Process Integration Towards Sustainability", "date": "2017", "keywords": "analysis; carbon; chemical engineering; cost; design; energy; engineering transactions; et al; exchanger; footprint; heat; hydrogen; integration; j.j; kleme\u0161; management; model; network; optimisation; p.s; pinch; plant; power; process; production; recovery; site; synthesis; systems; total; varbanov; walmsley; waste; water", "summary": "Figure 7: Total Site targeting with process specific minimum temperature difference (after Varbanov et al., 2012) Methodology development has also occurred by extending the concept of assisted heat transfer to TSI for increase heat recovery and shaft work targets (Walmsley et al., 2016a). Kleme\u0161 et al. (1997) added targets for power co-generation.", "mime": "application/pdf"}, {"id": "cet-5400", "words": "3158", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-5400", "date": null, "keywords": "biogas; cogeneration; energy; implementation; production; swine; system; waste", "summary": "Based on the first results this research analyzed the economical and environmental feasibility of biogas production, due to the implementation of anaerobic digestions system. Although the first model is the most common and simple, it may bring an overestimated value of biogas production and compromise the economical study for implementation of a cogeneration system.", "mime": "application/pdf"}, {"id": "cet-5401", "words": "2859", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-5401", "date": null, "keywords": "cycle; energy; impact; lca; life; production; quality; wine", "summary": "Figure 2: Impact assessment for different wine productions Figure 3: GWP of main processes occurring in the production stages (kgCO2eq/FU) The system boundary covered the industrial life-cycle stages of wine production.", "mime": "application/pdf"}, {"id": "cet-5402", "words": "2818", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-5402", "date": null, "keywords": "building; foundation; gwp; house; materials; pei", "summary": "2.2 Methodology Environmental evaluation of houses foundations was based on the calculation of environmental impacts of foundation building materials used in four selected buildings. Minimization of CO2 emissions and primal energy by building materials environmental evaluation and optimization, Chemical Engineering Transactions, 25, 1-6.", "mime": "application/pdf"}, {"id": "cet-5403", "words": "2895", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5403", "date": null, "keywords": "energy; heat; plant; process; project; treatment; waste; water", "summary": "An integration of energy production systems at waste water treatment plants into energy networks to meet energy demands of urban areas can foster economically feasible use of so far wasted energy. However for an integration of waste water treatment plants into regional energy supply infrastructures not only technical and operational data concerning the treatment plants has to be considered but also information on spatial planning in the adjacent area.", "mime": "application/pdf"}, {"id": "cet-5404", "words": "3214", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-5404", "date": null, "keywords": "assessment; chemical; cycle; et al; impact; incineration; life; management; waste", "summary": "The aim of these works was to assess the environmental performance of waste incinerators (Scipioni et al., 2009), compare different incineration technologies (Chen and Christensen, 2010), flue gas cleaning processes (Moller et al., 2011), management options of waste from incineration processes (Margallo et al., 2013), and different energy recovery strategies (Guigliano et al., 2008). Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 39, 2014 A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161, Peng Yen Liew, Jun Yow Yong Copyright \u00a9 2014, AIDIC Servizi S.r.l., ISBN 978-88-95608-30-3; ISSN 2283-9216 DOI: 10.3303/CET1439103 Please cite this article as: Margallo M., Aldaco R., Irabien A., 2014, A case study for environmental impact assessment in the process industry: municipal solid waste incineration (MSWI), Chemical Engineering Transactions, 39, 613-618 DOI:10.3303/CET1439103 613 A Case Study for Environmental Impact Assessment in the Process Industry: Municipal Solid Waste Incineration (MSWI) Mar\u00eda Margallo*, Rub\u00e9n Aldaco, Angel Irabien Departamento de Ingenier\u00edas Qu\u00edmica y Biomolecular, Universidad de Cantabria, Avda.", "mime": "application/pdf"}, {"id": "cet-5405", "words": "3149", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-5405", "date": null, "keywords": "decolourization; light; photocatalysts; tio2; zps", "summary": "The aim of the work was to increase the photoactivity of N-doped TiO2 photocatalyst, active in visible light region, through the improving of the illumination efficiency. Microradiators like phosphors (namely, ZPS) which absorb an electromagnetic radiation by the external light source (UV) and, with no time delay, emit visible light, opportunely selected to be able to excite N-doped TiO2 photocatalyst.", "mime": "application/pdf"}, {"id": "cet-5406", "words": "3407", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5406", "date": null, "keywords": "acid; concentration; copper; experiments; hemp; peat; removal; solutions; sorption", "summary": "In this case, the main mechanism of heavy metals removal is precipitation (due to increased pH) in the form of hydroxy-salts, hydrated oxides or hydroxides. Natural zeolite preferentially adsorbs hydrogen cations from solution to heavy metal ions (Inglezakis et al., 2003), and thus in more acidic conditions more H + ions are adsorbed from solution.", "mime": "application/pdf"}, {"id": "cet-55", "words": "3319", "extension": ".pdf", "flesch": "37", "author": "Shen, N.; Birungi, Z.S.; Chirwa, E.M.N.", "title": "Selective Biosorption of Precious Metals by Cell-surface Engineered Microalgae ", "date": "2017", "keywords": "biosorbents; cell; engineering; metals; microalgae; proteins; recovery; surface", "summary": "Chlamydomonas reinhardtii Pyrroline-5- carboxylate synthetase (P5CS) Cd2+ Intercellular bind fourfold more Cd2+ than wild-type cells (Siripornaduls il et al., 2002) 27 4.1 Self-flocculating microalgae Due to the small size of microalga cells (2 - 20 \u03bcm) and strong negative charge on cell surface (Barros et al., 2015), the economical harvesting/separation of microalgae from large volume solutions poses a formidable challenge for the industry commercialization. As mentioned above, it is feasible to construct the engineered microbes with high binding capacity and selectivity towards specific metal ions by overexpression of functional protein on cell surface.", "mime": "application/pdf"}, {"id": "cet-56", "words": "3497", "extension": ".pdf", "flesch": "45", "author": "Tabata, T.; Wakabayashi, Y.; Peii, T.; Saeki, T.", "title": "Environmental and Economic Evaluation of Pre-Disaster Waste Management ", "date": "2017", "keywords": "case; cost; data; disaster; environmental; management; storage; waste", "summary": "2. Methods 2.1 Concept of a disaster waste management system Figure 1 shows the flow of disaster waste management. The disaster waste management system was defined as follows: an integrated system in which disaster waste management flows from upstream (generation) to downstream (treatment).", "mime": "application/pdf"}, {"id": "cet-5610", "words": "3651", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-5610", "date": null, "keywords": "acid; carbon; nitrite; phosphorus; removal; spur; vfw", "summary": "A potential problem in the DNBPR is that the exposure to high nitrite concentrations may inhibit the activity of DPAOs. 5021 \u00b1 200 88.8 \u00b1 13.9 1567 \u00b178 197 \u00b1 22 1746 \u00b1 113 3.2 Effect on nitrite concentration", "mime": "application/pdf"}, {"id": "cet-5611", "words": "3287", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-5611", "date": null, "keywords": "adsorption; agar; beads; concentration; eps; ions; lead; metal; solution", "summary": "3.2 Effect of solution pH Earlier studies on heavy metal adsorption have showed that the initial pH of the solution is a critical parameter for adsorption experiments (Park et al., 2004; Azouaou et al., 2013). Additional increase in the pH was not considered because the beginning of the insoluble hydroxide precipitating from solution makes true metal adsorption studies impossible (Comte et al., 2008) 33 3.3 Effect of the concentration of (agar + EPS) beads Adsorbent dose is a significant factor to be considered for an effective metal removal.", "mime": "application/pdf"}, {"id": "cet-5612", "words": "3980", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-5612", "date": null, "keywords": "cod; decolourisation; fungal; phase; reactor; sludge; textile; treatment; wastewaters", "summary": "Integrated fungal biomass and activated sludge treatment for textile wastewaters bioremediation. Anastasi A., Spina F., Prigione V., Tigini V., Giansanti P., Varese G.C., 2010, Scale-up of a bioprocess for textile wastewater treatment using Bjerkandera adusta, Bioresour.", "mime": "application/pdf"}, {"id": "cet-5613", "words": "3479", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-5613", "date": null, "keywords": "batch; carbon; denitrification; nitrates; pine; process; release; substrates; test", "summary": "Another important aspect to discuss is related to the apparent discrepancy between the carbon release test and the microcosm results; in details, carbon release test shown that pine bark and olive pomace were the substrates capable to release the higher amount of organic carbon available, on the contrary the highest denitrification efficiency was achieved by the lowest releasers of carbon, cork and sawdust. A wide range of materials are capable to release organic carbon by means of leaching process (e.g. cotton (Della Rocca et al., 2006), newspapers (Volokita et al., 1996), wood and his derived materials, as sawdust, softwood, coniferous and mulch (inter alia Schipper et al., 2005; Greenan et al., 2006;", "mime": "application/pdf"}, {"id": "cet-5614", "words": "2854", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5614", "date": null, "keywords": "field; figure; flow; fluid; impeller; liquid; velocity; vessel", "summary": "A scrutiny of the specific flow features close to the vessel bottom shows that the velocity vectors are directed towards the vessel centre probably due to the inclination of bottom impeller discharge flow, which does not reach 51 the vessel base. The ensemble averaged velocity field at different Reynolds number, HL=H.", "mime": "application/pdf"}, {"id": "cet-5615", "words": "3342", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-5615", "date": null, "keywords": "additives; biofilm; biofouling; cells; days; flow; formation; growth; system; water", "summary": "This experimental apparatus (Model System) allowed the monitoring of biofilms growth that develops from make-up water entering cooling tower and to test the effectiveness of several additives that are usually used in real systems, in order to control the development of biofouling. 1.3 Monitoring of Biofouling in cooling water system Effective management of cooling water involves the control of biofilm growth through the application of a correct dosage of biocides and the periodic surface cleaning.", "mime": "application/pdf"}, {"id": "cet-5616", "words": "3128", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-5616", "date": null, "keywords": "biomass; fuel; gas; operating; power; process; production; steam; system; tail; utility", "summary": "The FT synthesis products are separated into syncrude and FT tail gas. Natural gas, coal and FT tail gas are fuel options.", "mime": "application/pdf"}, {"id": "cet-5617", "words": "3251", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-5617", "date": null, "keywords": "chain; eos; equilibrium; liquid; parameters; phase; saft", "summary": "SAFT EOS considers molecules as chains composed of freely jointed spherical segments and the basic idea underlying the model is the definition of an interaction potential to represent attraction and repulsion forces between segments. The second approach was based on estimation of the PC-SAFT parameters for triglycerides by regression of experimental phase equilibrium data according to the \u2018Maximum Likelihood\u2019 criterium: ( ) \uf0e5 \uf0e5\uf0e5 = \u2212 = \u2212 = \uf0fa \uf0fa \uf0fa \uf0fb \uf0f9 \uf0ea \uf0ea \uf0ea \uf0eb \uf0e9 \uf0f7\uf0f7 \uf0f7 \uf0f8 \uf0f6 \uf0e7\uf0e7 \uf0e7 \uf0e8 \uf0e6 \u2212 +\uf0f7 \uf0f7 \uf0f8 \uf0f6 \uf0e7 \uf0e7 \uf0e8 \uf0e6 \u2212 +\uf0f7 \uf0f7 \uf0f8 \uf0f6 \uf0e7 \uf0e7 \uf0e8 \uf0e6 \u2212 +\uf0f7 \uf0f7 \uf0f8 \uf0f6 \uf0e7 \uf0e7 \uf0e8 \uf0e6 \u2212 = exp cc iii N 1i 1N 1j 2 i, j,i,calj,iexp, 1N 1j 2 i, j,i,calj,iexp, 2 i,P i,caliexp, 2 i,T i,caliexp, m,, S xx S xx S PP S TT min \u03b2 \u03b2\u03b2 \u03b1 \u03b1\u03b1 \u03c3\u03b5 \u03a9 (6)", "mime": "application/pdf"}, {"id": "cet-5618", "words": "3107", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5618", "date": null, "keywords": "0,01; biomass; case; combustion; efficiency; fuel; gas; problems; process; wobbe", "summary": "In petroleum refining case, fuel gas is generally a blend of natural and multiple gas streams, which are generated in the refining process. High Heating Value (HHV) and the relative density of the fuel blend were used to calculate the Wobbe index for fuel gas.", "mime": "application/pdf"}, {"id": "cet-5619", "words": "2723", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-5619", "date": null, "keywords": "dilution; growth; light; medium; rate; \u22c5 \u22c5", "summary": "Chapter 5 Non transparent media are frequently obtained as the byproduct of processing in the agro-food and in ancillary domains, and they are frequently assayed for their suitability as growth media for various microbial biomasses, including microalgae. in order to cancel out unknown constants in the Monod form of specific growth rate (\u03bcmax e KI)", "mime": "application/pdf"}, {"id": "cet-5620", "words": "2357", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-5620", "date": null, "keywords": "air; cattle; digestate; growth; medium; platensis; water", "summary": "A series of treatments was adopted to eliminate solids and biological contaminants, DOI: 10.3303/CET1438015 Please cite this article as: Cicci A., Bravi M., 2014, Production of the freshwater microalgae scenedesmus dimorphus and arthrospira platensis by using cattle digestate, Chemical Engineering Transactions, 38, 85-90 DOI: 10.3303/CET1438015 85 and two set of experiments were carried out: cultures insufflated with only air and cultures insuflated with air 5% CO2 at different dilution ratios of synthetic medium and treated digestate. 3. Results and discussion The potential use of cattle digestate as medium for microalgal cultivation (Scenedesmus dimorphus 1237 and Arthrospira platensis) was investigated; two sets of growth tests were carried out by using mixtures of cattle digestate with tap water (first set) and digestate with synthetic medium (second set).", "mime": "application/pdf"}, {"id": "cet-5621", "words": "3281", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-5621", "date": null, "keywords": "batch; decolorization; degradation; drum; dye; experiments; liquid; rate", "summary": "The most of dye degradation experiments were carried out using solid agar media and in shaken or static flask cultures. Sima J., Pocedic J., Roubickova T., Hasal P., 2012, Rotating drum biological contactor and its application for textile dyes decolorization, Procedia Engineering 42, 1579-1586.", "mime": "application/pdf"}, {"id": "cet-57", "words": "3812", "extension": ".pdf", "flesch": "41", "author": "Jegla, Z.; Turek, V.; Kilkovsky, B.; Stehlik, P.", "title": "Methods and Tools for Reliable Design of Equipment in Waste-to-Energy Units ", "date": "2017", "keywords": "behavior; design; equipment; flow; heat; method; system; transfer; waste; wte", "summary": "Through an industrial example, the paper presents new trends in equipment design for up-to-date WtE units and new design methods and calculation tools which the authors have been developing to ensure high design accuracy and operating reliability of such new equipment. Novel methods and tools for design of new equipment Given the new trends mentioned in the previous paragraphs, reliable WtE equipment design methods and tools must be available.", "mime": "application/pdf"}, {"id": "cet-5714", "words": "3565", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-5714", "date": null, "keywords": "analysis; astm; bamboo; biochar; biomass; chemical; heating; properties; pyrolysis; temperature", "summary": "Temperature (\u00b0C) Gas Bio-oil Biochar 118 Table 2: Properties of bamboo biochar produced at 500 \u00b0C Property Value Particle density (kg/m3) 1740 \u00b1 10 Bulk density (kg/m3) 105.1 \u00b1 1.8 High heating value (MJ/kg) 30.865 \u00b1 0.187 The ultimate analysis shows that bamboo biochar is highly carbonaceous, with a carbon content of 82.1%.The high carbon content of biochar is advantageous in terms of maximizing the amount of carbon storage and could be used as an energy resource or for soil adsorption of pollutants (Lee et al., 2013b).", "mime": "application/pdf"}, {"id": "cet-5715", "words": "3635", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-5715", "date": null, "keywords": "bed; bio; biomass; char; hdo; japonica; oil; pyrolysis", "summary": "The catalytic reaction was performed in a bench-scale trickle-bed reactor with concurrent downflow of bio-oil and hydrogen. Bae Y.J., Ryu C., Jeon J.-K., Park J., Suh D.J., Suh Y.-W., Chang D., Park Y.-K., 2011, The characteristics of bio-oil produced from the pyrolysis of three marine macroalgae, Bioresour.", "mime": "application/pdf"}, {"id": "cet-5716", "words": "3551", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-5716", "date": null, "keywords": "biomass; catalyst; content; fuel; oil; oils; oxygen; pyrolysis; ratio; seed; yield", "summary": "The oil was rich in hydrocarbon and thus termed as catalytic pyrolysis oils which can be used as fuel. Catalytic pyrolysis oils were characterized by using some spectroscopic techniques such as FTIR, 1H NMR and elemental analysis and obtained results compared with non-catalytic pyrolysis oil.", "mime": "application/pdf"}, {"id": "cet-5717", "words": "4409", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-5717", "date": null, "keywords": "astm; bamboo; bio; biomass; content; oil; products; pyrolysis; species; temperature; yield", "summary": "Besides this study on product yield, Lou et al. (2013) and Xiao et al. (2007) have been found to report on pyrolysis bamboo species however with addition of catalyst. Ash content analysis is done according to ASTM E1755-95 using 4 g of bamboo sample in a ceramic crucible to measure approximately the mineral content and other inorganic matter (ASTM 2003).", "mime": "application/pdf"}, {"id": "cet-5718", "words": "3369", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-5718", "date": null, "keywords": "capture; carbon; case; co2; coal; costs; energy; gasification; hydrogen; plant; power", "summary": "The mass and energy balances resulted from simulation are then used to assess the main techno-economic and environmental indicators of the evaluated cases, like plant energy efficiency, ancillary power consumption, carbon capture energy and cost penalty, specific CO2 emissions, capital costs, specific capital investment per kW, operation and maintenance (O&M) costs, cost of electricity, CO2 removal and avoidance costs, cash flow analysis. Oxygen purity: 95 % O2; Power consumption: 225 kWh/t O2 Water gas shift (WGS) Sour shift; 3 catalytic beds; Steam/CO ratio: 2.5; CO conversion: >95 % Acid Gas Removal (AGR) Selexol\u00ae-based gas-liquid absorption - desorption cycle CO2 drying and compression Delivery pressure: 120 bar; Drying solvent: TEG Gas turbine Type: M701G2 (MHI); Net power output: 334 MW; 39.5 % efficiency Steam cycle Steam pressure: 120 bar / 34 bar / 3 bar Condenser pressure 50 mbar Cooling water temperature 15 oC Heat exchanger \u2206Tmin. 10 oC HX pressure drop (\u2206P) 2 - 5 % 3. Results and discussions Evaluated IGCC power plant cases with CCS were modelled and simulated using ChemCAD.", "mime": "application/pdf"}, {"id": "cet-5719", "words": "3556", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-5719", "date": null, "keywords": "boiler; chamber; combustion; feathers; flue; fuel; gasification; nitrogen; plant; system", "summary": "Such eutectic system was described, among others, by Du, 2000. Ecologically and economically feasible management of waste feathers is a growing issue, especially in the context of recent outbreak of avian influenza which led to restrictions in bone meal production.", "mime": "application/pdf"}, {"id": "cet-5720", "words": "4233", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5720", "date": null, "keywords": "bed; biomass; drop; gasification; gasifier; plant; pressure; size; syngas; tests", "summary": "Biomass gasification with air in downdraft gasifiers coupled to an internal combustion engine is one of the most common small scale applications due to the low tar content of the syngas and high fuel conversion. This condition should be avoided since it may lead to a low-quality syngas (low heating value), blockage of the biomass loading system, and low biomass conversion.", "mime": "application/pdf"}, {"id": "cet-5721", "words": "3880", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-5721", "date": null, "keywords": "bed; biomass; char; filter; gasification; gasifier; olivine; particles; presence; process; tar; time", "summary": "The second one was a Al2O3 158 based Non-catalytic hot gas filter candle of new type, used for comparative purposes. When the Non-Catalytic filter is placed into the gasifier, in presence of used olivine as a bed inventory, the H2 yield increases steadily during the four hours of gasification time, whereas in presence of Catalytic filter the yield of H2 reaches the steady state value after only one hour of gasification time.", "mime": "application/pdf"}, {"id": "cet-5722", "words": "3038", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-5722", "date": null, "keywords": "biomass; conditions; gas; gasification; oxygen; presence; pyrolysis; temperature; yields", "summary": "4. Results and discussion 4.1 Gas yields Individual gas yields are given in Figure 3 (H2, CO, H2O, CO2) and Figure 4 (CH4, C2H2, C2H4, C6H6). Although the O2 partial pressure is much lower (0.02-0.03 bar) than in an EFR (Table 1), the O2/biomass mass ratio was chosen to be representative of an EFR in order to have similar behaviour for gas phase reactions.", "mime": "application/pdf"}, {"id": "cet-5723", "words": "4622", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-5723", "date": null, "keywords": "addition; bagasse; biomass; ch4; co2; molar; production; reactant; scwg; syngas; systems; wt%", "summary": "The noxide ppears of our ction in DOI: 10.3303/CET1437029 Please cite this article as: Daltro de Freitas A.C., Guirardello R., 2014, Thermodynamic effect of co-reactant addition in the supercritical water gasification of biomass, Chemical Engineering Transactions, 37, 169-174 DOI: 10.3303/CET1437029 169 SCWG of glucose and cellulose (Freitas and Guirardello, 2012a) and in SCWG of microalgae biomass from C. vulgaris and Spirulina sp. (Freitas and Guirardello, 2013). diabatic syst ed on equilibr re (973.15 K) th substrates e addition of C hermic behavio eratures obse nitial tempera ures (K) arcane bagas .46 6.60 5.22 9.59 2.23 7.83 2.17 at constant pr The SCWG of amined.", "mime": "application/pdf"}, {"id": "cet-5725", "words": "3789", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-5725", "date": null, "keywords": "acceptance; algorithm; analysis; bioenergy; biomass; centrality; concepts; fcm; information; optimization; plant; stakeholders", "summary": "First, through a between-subjects approach, the concepts involved in biomass plants acceptance were defined and related to each other by means of Fuzzy Cognitive Map (FCM). 2. Methodology 2.1 Fuzzy Cognitive Map implementation Different studies have investigated biomass plants acceptance.", "mime": "application/pdf"}, {"id": "cet-58", "words": "3227", "extension": ".pdf", "flesch": "45", "author": "Gong, W.; Wei, Y.; Li, B.; Huang, Z.; Zhao, L.", "title": "Hydrogen Production from Landfill Leachate using Supercritical Water Gasification ", "date": "2017", "keywords": "cod; hydrogen; landfill; leachate; pressure; supercritical; temperature; water", "summary": "In this study, landfill leachate was treated by supercritical water gasification, in order to obtain the hydrogen from leachate. The results indicated that supercritical water gasification is an effective method to treat landfill leachate with production of hydrogen-rich gas.", "mime": "application/pdf"}, {"id": "cet-59", "words": "4215", "extension": ".pdf", "flesch": "52", "author": "Yamzon, A.; Ventura, V.; Guico, P.; Sy, C.", "title": "A Mixed Integer Nonlinear Model for Closed-Loop Supply Chains with Incentive and Proximity based Product Returns ", "date": "2017", "keywords": "incentive; period; product; quality; quantity; recovery; returns", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 61, 2017 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Petar S Varbanov, Rongxin Su, Hon Loong Lam, Xia Liu, Ji\u0159\u00ed J Kleme\u0161 Copyright \u00a9 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-51-8; ISSN 2283-9216 A Mixed Integer Nonlinear Model for Closed-Loop Supply Chains with Incentive and Proximity based Product Returns Antonio Yamzon, Veanney Ventura, Paolo Guico, Charlle Sy* Industrial Engineering Department, De La Salle University, 2401 Taft Avenue, Manila1004, Philippines, charlle.sy@dlsu.edu.ph Electronics firms in different locations are being required to collect used products due to environmental and health hazards. In order to meet environmental requirements, firms carry out collection activities and provide incentive offers to attract product returns.", "mime": "application/pdf"}, {"id": "cet-5930", "words": "2898", "extension": ".htm", "flesch": "52", "author": "Lauret, P.; Heymes, F.; Aprin, L.; Johannet, A.; Dusserre, G.; Lapebie, E.; Osmont, A.", "title": "Atmospheric Turbulent Dispersion Modeling Methods using Machine learning Tools", "date": "2014", "keywords": "ade; ann; diffusion; dispersion; error; figure; models; networks; time", "summary": "Atmospheric dispersion models use velocity field as an input. Figure 2 : ANN Training method 4.1 Artificial Neural Networks ruled (CA-ANN) Cellular Automata This method uses both Cellular Automata (CA) and Artificial Neural Networks.", "mime": "application/pdf"}, {"id": "cet-5931", "words": "2985", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-5931", "date": null, "keywords": "cfd; dispersion; field; gas; jet; models; obstacles; pontiggia; results", "summary": "Results of the two approaches were compared in order to obtain: 1) a cross check of the CFD results in open field (thus validating the effectiveness of the CFD models in predicting the effect of atmospheric turbulence in open field, where the integral model are largely validated); 2) a validation of the CFD capacity in describing the interaction between high momentum jets and geometrical obstacles in the near field, verifying that the initial loss of momentum of the impinged jet would resolve in lower initial fresh air entrainment and therefore longed damage distances; 3) a comparison between CFD and integral methods predictions of impinged jet damage distances, to verify the over-conservative approach of integral methods; 4) a solid and time effective simulation approach to be applied in a massive number of CFD runs to build up a criterion to evaluate the best available model for impinged jet dispersions. Pontiggia M., Landucci G., Busini V., Derudi M., Alba M., Scaioni M., Bonvicini S., Cozzani V., Rota R., 2011, CFD model simulation of LPG dispersion in urban areas, Atmospheric Environment, 45, 3913-3923.", "mime": "application/pdf"}, {"id": "cet-5932", "words": "3794", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-5932", "date": null, "keywords": "action; data; dispersion; emergency; evaluation; hazards; modelling; models; rate; response; results; scale; test; tools; type; use", "summary": "Since specific datasets suited for emergency response models are rare, datasets originally gathered in atmospheric dispersion models are mainly described in this document. This inventory will allow for model- specific guidance regarding an efficient and reliable use of different model tools.", "mime": "application/pdf"}, {"id": "cet-5933", "words": "3685", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5933", "date": null, "keywords": "buildings; cloud; explosion; models; phast; potential; process; regions; software", "summary": "The definition of 3D obstructed regions in the Geographical Information System (GIS) \u2022 Consideration of the degree of overlap between the flammable cloud and the obstructed region to accurately determine the explosive mass and location \u2022 Consideration of critical separation distance between defined obstructed regions. Environmental considerations include the presence of areas of congestion and confinement (obstructed regions).", "mime": "application/pdf"}, {"id": "cet-5934", "words": "3646", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-5934", "date": null, "keywords": "energy; explosion; liquid; overpressure; pressure; vessel", "summary": "Vessel energy content The energy released in a BLEVE depends directly on the amount of material contained in the vessel, and on the temperature inside the vessel just before the explosion (and, therefore, on the pressure). Casal, J., Salla, J. M., 2006, Using liquid superheating energy for a quick estimation of overpressure in BLEVEs and similar explosions.", "mime": "application/pdf"}, {"id": "cet-5935", "words": "3538", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-5935", "date": null, "keywords": "barrier; concentration; design; groundwater; pab; pce", "summary": "In order to define the optimal thickness, T, further simulations were carried out in the range T=0 to 4 m, with a \u2206T step of 0.1 m, allowing to minimize PAB thickness. PAB design is generally time-invariant because, once the barrier is positioned and its dimensions set, the scheme does not change during the entire remediation process.", "mime": "application/pdf"}, {"id": "cet-5936", "words": "2281", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-5936", "date": null, "keywords": "chemical; concentration; consequences; min; oxygen; safety; scenario", "summary": "Selection of typical accident scenarios for modeling On the basis of the study of accidents and near misses, which are described in the literature and in the Internet, we have determined typical accident scenarios with reduction of oxygen concentration in the outdoor environment. [ppm] Vulnerability model for carbon dioxide p (t = 1min) p (t = 5 min) p (t = 10 min) 555 The fundamental problems of work in areas with potential reduction of oxygen concentration are the speed of exposure and the impossibility of identification.", "mime": "application/pdf"}, {"id": "cet-5937", "words": "3346", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-5937", "date": null, "keywords": "analysis; assessment; management; methods; operations; risk; safety; smes; tools; tosca", "summary": "The issues of SMEs safety management systems in Europe and the TOSCA project The Total Operations Management for Safety Critical Activities (TOSCA) project is a European Project within the context of the 7th Framework Programme aimed at developing an innovative approach to integrate and enhance safety, quality and productivity especially for SMe in the process industry. The requirements for safety management in existing and upcoming standards and regulations, as for example the ISO 31000 and or the Seveso II directive, call for a proactive strategic approach, anticipating risks and demonstrating a capacity to keep safety at the centre of changes driven by commercial competition, and ensuring that safety evidence itself becomes an effective driver of change.", "mime": "application/pdf"}, {"id": "cet-5938", "words": "2784", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-5938", "date": null, "keywords": "assessment; factors; hof; human; media; process; risk; safety", "summary": "In this paper HUGIN Lite 7.7 has been used for BN. 3.2 Bayesian network BN technique is used in MEDIA to determine the dependencies between organizational and human factors and also to quantify the effect of organizational factors on human factors. Dependencies and probabilities will be modified after analyzing past accidents in order to get more realistic effect of organizational factors on human factors.", "mime": "application/pdf"}, {"id": "cet-5939", "words": "4087", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-5939", "date": null, "keywords": "data; hazards; management; process; project; register; risk; risk register; safety", "summary": "Despite the clear importance of risk registers in the risk management process, there is very little guidance on their development and implementation (Dunovi\u0107 et al., 2013) and previous research has found that although 67% of companies use some form of risk register, the majority have developed their own format to host it (Patterson and Neailey, 2002). A publication of The Italian Association of Chemical Engineering www.aidic.it/cet Guest Editors: Valerio Cozzani, Eddy de Rademaeker Copyright \u00a9 2014, AIDIC Servizi S.r.l., ISBN 978-88-95608-27-3; ISSN 2283-9216 Safety Risk Registers: Challenges and Guidance Nora Balfe*a, M. Chiara Levaa, Brian McAleerb, Michael Rockeb aCentre for Innovative Human Systems, Trinity College Dublin, Dublin 2, Ireland bESB, 27 Lower Fizwilliam St, Dublin 2, Ireland balfen@tcd.ie A risk database, or risk register, is a central tool for organisations to use to monitor and reduce risks, both those identified during initial safety assessments and those emerging during operations (Whipple and Pitblado, 2010).", "mime": "application/pdf"}, {"id": "cet-5940", "words": "4821", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-5940", "date": null, "keywords": "control; design; designers; factors; hfe; human; iso; principles; review; risk; safety; standards; support; system", "summary": "Existing standards and industrial practices for HFE in Design To support the challenging task of the design team there are number of standards able to provide some guidance on the minimum requirements in terms of human centred design: for example, ISO 6385 \u2013 Ergonomic Principles in the Design of Work Systems (2004) outlines how technological, economic, organisational, and human factors can affect the work behaviour and well-being of people within a work system. stitutes blem is fficient factors during will be oncrete f future man in r rapid gree of nance, of the DOI: 10.3303/CET1436097 Please cite this article as: Naghdali F., Leva M.C., Balfe N., Cromie S., 2014, Human factors engineering at design stage: is there a need for more structured guidelines and standards?, Chemical Engineering Transactions, 36, 577-582 DOI: 10.3303/CET1436097 577 system increases, the reluctance of the designers to substitute the operator with automated functions will increase as well.", "mime": "application/pdf"}, {"id": "cet-5941", "words": "3346", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-5941", "date": null, "keywords": "analysis; assessment; atex; evaluation; hofs; human; probability; risk", "summary": "During the risk evaluation procedure, human risk level, based on the results of HEP, has been introduced into the original ATEX risk assessment methodology. In ATEX risk evaluation, in general, the risk (R) relies on a semi-quantitative approach based on the following indexes: probability of an explosive atmosphere formation (P), probability of the presence of an effective ignition source (C), consequences (D), and also the other factors (e.g. personnel presence (PL), dust explosion index (Kst), Gas explosion index (KG), Cloud Volume (VZ), Layer Thickness (SS),", "mime": "application/pdf"}, {"id": "cet-5942", "words": "3622", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-5942", "date": null, "keywords": "culture; management; organisation; process; reporting; safety; scope; system", "summary": "Safety management systems and safety culture in aircraft maintenance organisations. Reporting culture can be considered to be part of the organizational safety culture as a whole (Reason 1997).", "mime": "application/pdf"}, {"id": "cet-60", "words": "3745", "extension": ".pdf", "flesch": "42", "author": "Bansal, N.; Coetzee, J.J.; Chirwa, E.M.N.", "title": "In Situ Bioremediation of Chromium (VI) In a Simulated Ferrochrome Slag ", "date": "2017", "keywords": "anaerobic; chromium; concentration; conditions; cr(iii; cr(vi; culture; presence; reduction; water", "summary": "Fe(II) can be oxidised to Fe(III) upon exposure to oxygen in the presence of iron oxidising microorganism (Mesa et al., 2002) such as bacteria species Acidithiobacillus ferroxidans (Liu et al., 2015). In situ bioremediation of chromium (vi) in a simulated ferrochrome slag, Chemical Engineering Transactions, 61, 55-60 DOI:10.3303/CET1761007 55 Cr(VI) to Cr (III) using chemical agents such as sulphur dioxide gas, sodium bisulphite (Barrera-D\u00edaz et al., 2012), and iron salts followed by precipitation to Cr(OH)3(s) (Hawley et al., 2004).", "mime": "application/pdf"}, {"id": "cet-6038", "words": "3950", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-6038", "date": null, "keywords": "electricity; energy; grid; heat; ostend; power; process; sources; storage; waste; wind", "summary": "Haeseldonckx et al. (2007) show that thermal energy storage in CHP installations can improve the net reduction of CO2 emission by factor of almost three. Faninger G., 2004, Thermal energy storage, Faculty for Interdisciplinary Research and Continuing Education, IFF-University of Klagenfurt, Austria.", "mime": "application/pdf"}, {"id": "cet-6039", "words": "2780", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-6039", "date": null, "keywords": "co2; energy; gas; methanation; model; reactor; results; simulation", "summary": "The mixture leaving methanation reactor contained 47.3 % of CH4, 1.2 % of H2, 6.6 % of CO2, 0.1 % of CO and 44.7 % of H2O. 1. Modelling of methanation reactor 2.1 Components and thermodynamical model The simulation model was developed using Aspen Plus\u2122.", "mime": "application/pdf"}, {"id": "cet-6040", "words": "3529", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-6040", "date": null, "keywords": "energy; figure; power; storage; tank; technologies; temperature; tes", "summary": "This is also called thermocline tank due to the thermal stratification phenomena in storage tank (Ore et al., 2012). 4.2 Storage tank issues As discussed earlier, two conventional technologies are well-known for CSP plants based on the number of storage tanks (one or two).", "mime": "application/pdf"}, {"id": "cet-6041", "words": "3624", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-6041", "date": null, "keywords": "biomass; energy; heat; pre; process; treatment", "summary": "Feedstocks, logistics and pre-treatment processes for sustainable lignocellulosic biorefineries: A comprehensive review. The relatively small plant scales have been considered for consistency with the study by (Steubing et al., 2012) which also shows that, because biomass is a diffuse resource, optimal plant sizes for biomass conversion plants, in terms of environmental performance are relatively small, from 5 to 40 MWth.", "mime": "application/pdf"}, {"id": "cet-6042", "words": "3616", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-6042", "date": null, "keywords": "biomass; electricity; gas; gasification; mill; process; production; torrefaction", "summary": "This approach is demonstrated in the right figure, showing a joint grand composite curve (GCC) for the two processes (FT process and pulp and paper mill) with an integrated steam cycle (dashed line). The difference in FT crude production between the case with the largest yield (grinding + FT with recycle) and the lowest (torrefaction + once-through FT) is more than 20 %.", "mime": "application/pdf"}, {"id": "cet-6043", "words": "2795", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-6043", "date": null, "keywords": "biomass; feedstock; gasification; hydrogen; production; steam; waste", "summary": "Weil S., Hamel S., Krumm W., 2006, Hydrogen energy from coupled waste gasification and cement production\u2014A thermochemical concept study, International Journal of Hydrogen Energy, 31, 1674- 1689. Chang et al. (2011) studied on biomass gasification for hydrogen production.", "mime": "application/pdf"}, {"id": "cet-6044", "words": "4120", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-6044", "date": null, "keywords": "energy; energy system; evolution; heat; integration; models; operation; optimisation; system; technologies; time", "summary": "Farret F. A., Sim\u00f5es M. G., John Wiley & Sons Inc., Hoboken, New Jersey, USA Loulou R., Goldstein G., Noble K., 2004, Documentation for the MARKAL Family of Models, Energy Technology Systems Analysis Programme, Loulou R., Remne U., Kanudia A., Lehtila A., Goldstein G., 2005, Documentation for the TIMES Model, Energy Technology Systems Analysis Programme, Lund H., 2012, EnergyPLAN Advanced Energy Systems Analysis Computer Model Documentation Version 10.0, 10.0 ed, Aalborg University, Aalborg, Denmark Maes T., Van Eetvelde G., De Ras E., Block C., Pisman A., Verhofstede B., Vandendriessche F., Vandevelde L., 2011, Energy management on industrial parks in Flanders, Renewable and Sustainable Energy Reviews, 15, 1988-2005 Marechal F., Kalitventzeff B., 2003, Targeting the integration of multi-period utility systems for site scale process integration, Applied Thermal Engineering, 23, 1763-1784 Nakata T., Silva D., Rodionov M., 2011, Application of energy system models for designing a low-carbon society, Progress in Energy and Combustion Science, 37, 462-502 Nemet A., Kleme\u0161 J. J., Varbanov P., Aktins M. J., Walmsley M., 2012, Total site methodology as a tool for planning and strategic decisions, Chemical Engineering Transactions, 29, 115-120 Palazzi F., 2010, Osmose User Manual, Industrial Energy Systems Laboratory (LENI), \u00c9cole Polytechnique F\u00e9d\u00e9rale de Lausanne (EPFL), Lausanne, Switzerland Schweiger H., 2011, Guide for Einstein Thermal Energy Audits, energyXperts. Classification and selection of energy models During the last decades a variety of techno-economic energy models has been developed, each serving particular purposes.", "mime": "application/pdf"}, {"id": "cet-6045", "words": "2784", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-6045", "date": null, "keywords": "biomass; case; cost; energy; load; power; solar; system", "summary": "IBS energy system is deemed to be a cleaner power generation scheme, at the expense of higher capital cost expenditure on solar (Gallardo et al., 2011). Cost and capacity of IBS energy system for different cases Figure 3.", "mime": "application/pdf"}, {"id": "cet-6046", "words": "4316", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-6046", "date": null, "keywords": "ampelli; cuox; ethanol; gas; phase; photo; production; tio2; water", "summary": "The methods of sample preparation allowed to maximize the dispersion of copper nanoparticles on TiO2 surface, improving their photocatalytic performances in H2 production. The metal copper nanoparticles were loaded on the supports by photo-deposition technique, which allowed a better control of the particle size and dispersion on TiO2 surface (Ampelli et al., 2012b).", "mime": "application/pdf"}, {"id": "cet-6047", "words": "3174", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-6047", "date": null, "keywords": "chemical; coefficient; composites; conductivity; density; hemp; hurds; material; strength; water", "summary": "In our previous papers (Kidalova et al, 2012) and also (Stevulova et al, 2012), experimental study of the parameters affecting the physical and mechanical properties of hemp composite based on conventional and alternative binders was performed. The found values of thermal conductivity coefficient and density of hemp composites are comparable to other building materials such as aerated autoclaved concrete (for thermal conductivity coefficient: 0.04- 0.17 W\u2022m-1\u2022K-1; for density: 800 \u2013 1,200 kg\u2022m-3).", "mime": "application/pdf"}, {"id": "cet-6048", "words": "3598", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-6048", "date": null, "keywords": "capacity; cassava; costs; ethanol; investment; plant; production; roi; transportation", "summary": "Figure 1: Optimal capacity sensitivity analysis Figure 1 illustrates the fact that improvements of the cassava-to-ethanol conversion ratio (i.e. lower ratios) have the greatest leverage on optimal plant capacities. Please cite this article as: Lauven L.P., Liu B., Geldermann J., 2013, Investigation of the influence of plant capacity on the economic and ecological performance of cassava-based bioethanol, Chemical Engineering Transactions, 35, 595-600 DOI:10.3303/CET1335099 595 soils.", "mime": "application/pdf"}, {"id": "cet-6049", "words": "2854", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-6049", "date": null, "keywords": "brazil; electricity; generation; paran\u00e1; photovoltaic; state; values", "summary": "References ANEEL, 2011, Strategic Project- Call No. 13/2011: technical and commercial arrangements for insertion of solar photovoltaic generation in Brazilian energy matrix (in Portuguese). DOI: 10.3303/CET1335100 Please cite this article as: Tiepolo G.M., Canciglieri Junior O., Urbanetz Junior J., 2013, Analysis of the electricity generation potential by solar photovoltaic source in the state of paran\u00e1 \u2013 brazil, Chemical Engineering Transactions, 35, 601-606 DOI:10.3303/CET1335100 601 The solar PV in Brazil still requires more investments.", "mime": "application/pdf"}, {"id": "cet-6050", "words": "3061", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-6050", "date": null, "keywords": "biogas; carbon; hydrogen; pemfc; process; reforming; steam", "summary": "DOI: 10.3303/CET1335101 Please cite this article as: Authayanun S., Aunsup P., Im-orb K., Arpornwichanop A., 2013, Systematic analysis of proton electrolyte membrane fuel cell systems integrated with biogas reforming process, Chemical Engineering Transactions, 35, 607-612 DOI:10.3303/CET1335101 607 To date, a number of studies have been concentrated on the synthesis of catalysts to minimize the carbon formation and maximize the hydrogen yield (Kambolis et al., 2010). Different biogas reforming processes considered are dry and steam reforming.", "mime": "application/pdf"}, {"id": "cet-61", "words": "3522", "extension": ".pdf", "flesch": "60", "author": "Xiao, W.; Ran, H.; Jiang, X.; Li, X.; He, G.", "title": "Control Schemes of Hybrid Distillation-vapor Permeation Process for Ethylene/Ethane Separations ", "date": "2017", "keywords": "control; distillation; flow; rate; scheme; stage; temperature; time", "summary": "3.2 Pressure and temperature control scheme (scheme 2 or S2) In the dynamic simulation, controller was added in steady state model according control schemes.", "mime": "application/pdf"}, {"id": "cet-62", "words": "4148", "extension": ".pdf", "flesch": "48", "author": "Isafiade, A.J.", "title": "Integration of Renewable Energy into Mass, Heat and Regeneration Network Synthesis ", "date": "2017", "keywords": "energy; exchange; heat; mass; network; thermal", "summary": "Furthermore, for cases where the mass exchange operations are continuous processes, integrating solar thermal heat, whose availability is non-continuous and unpredictable, requires that the existing stage-wise models for HENS and MENS be updated to handle such cases. For the indirect heat integration, which involves use of solar heat as hot utilities at periods when solar irradiation is unavailable or insufficient, formulations are included in the model to simultaneously determine the optimal tank size for thermal heat storage.", "mime": "application/pdf"}, {"id": "cet-6252", "words": "3809", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-6252", "date": null, "keywords": "cluster; level; model; pdf; phm; prognosis; signs; time; transition", "summary": "Introduction Development of methods and algorithms for remote PHM systems have been taken by the united team CALCE (USA), SmartSys Prognosis (space and telecommunication technological cluster, Skolkovo, Moscow), SmartSys Prognosis Inc. (USA) in recent years. The project objectives have concentrated on creating and market approbation of remote PHM system in order to determine the necessary functionality, architecture and basic scenarios.", "mime": "application/pdf"}, {"id": "cet-6253", "words": "4178", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-6253", "date": null, "keywords": "analysis; asset; data; engineers; leak; monitoring; power; system", "summary": "Conclusions By presenting three case studies of power industry applications, this paper highlights the successes of diagnostic systems and the challenges for prognostics systems in this field. This section highlights some of these issues, which should be resolved before future prognostic systems are likely to progress towards deployed prototypes.", "mime": "application/pdf"}, {"id": "cet-6254", "words": "3922", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-6254", "date": null, "keywords": "development; health; ieee; information; maintenance; management; monitoring; phm; prognostics; sae; series; standards; system", "summary": "This paper reviews the existing fault prognostics and health management standards and gives the in-depth analysis and comparison on the formulation of PHM standard. And the state-of-the-art in PHM related standards is also given.", "mime": "application/pdf"}, {"id": "cet-6255", "words": "2551", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-6255", "date": null, "keywords": "abnormality; decision; degradation; engine; phm; score; threshold", "summary": "Figure 6: Prior abnormality decision threshold and global abnormality score distributions with three starter air valve degradation intensities. As seen previously, the order of magnitude of P(Detection| No degradation) should be typically 5.10-8 or 5.10-9 Figure 4: Observed and adjusted cumulative distribution function of ESC global abnormality score with no degradation.", "mime": "application/pdf"}, {"id": "cet-6256", "words": "3215", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-6256", "date": null, "keywords": "coefficient; drift; field; inertial; platform system; storage; t t; torque", "summary": "3.3 Storage behavioral model of heading sensitive drift of inertial platform system caused by the magnetic field Insert equations from Equation (3) to Equation (14) into Equation (2) and unify the units of all parameters, and we can obtain the storage behavioral model of the heading sensitive drift of the inertial platform system under the influence of the magnetic field. It is also difficult to analyze its drift behavior for the model- based PHM system designing of inertial platform systems in engineering application.", "mime": "application/pdf"}, {"id": "cet-6257", "words": "3452", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-6257", "date": null, "keywords": "damage; failure; loads; maintenance; number; system; terrain; usage", "summary": "The first requirement can be met by adopting physical failure models that quantitatively describe the damage rates as a function of the system usage. Although an estimate of the average degradation rate can be obtained from a (large) collection of failure data, the precise relation with operational DOI: 10.3303/CET1333050 Please cite this article as: Tinga T., 2013, Predictive maintenance of military systems based on physical failure models, Chemical Engineering Transactions, 33, 295-300 DOI: 10.3303/CET1333050 295 conditions is hard to obtain.", "mime": "application/pdf"}, {"id": "cet-6258", "words": "2665", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-6258", "date": null, "keywords": "behaviour; data; equipment; maintenance; matrix; model; pca; variables", "summary": "Where inewy ,\u02c6 is computed from the reference PLS and PCA model and N is the number of observations. PLS model is built on the properties of the NIPALS algorithm (Geladi and Kowalsky, 1986).", "mime": "application/pdf"}, {"id": "cet-6259", "words": "3421", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-6259", "date": null, "keywords": "degradation; equipment; k k; risk; time", "summary": "Section 3 introduces the DOI: 10.3303/CET1333052 Please cite this article as: Compare M., Zio E., 2013, Risk sensitive particle filtering in support of predictive maintenance, Chemical Engineering Transactions, 33, 307-312 DOI: 10.3303/CET1333052 307 reference example; the application of the RSPF to such example is discussed in Section 4; Section 5 concludes the work. k k kr x P x z z\u03b3 (3) where ( )kr x is a positive and finite (almost everywhere) risk function, whereas k\u03b3 is a normalization constant ensuring that 1( ) ( | ,..., )", "mime": "application/pdf"}, {"id": "cet-6260", "words": "2997", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-6260", "date": null, "keywords": "cos cos; data; sin cos; sin sin", "summary": "Immersive virtual maintenance simulation system 3.1 This article introduces a method that use motion capture software (Shape Recorder) and virtual simulation software (DELMIA) to build immersive virtual maintenance simulation system, which not only can help analyze the maintenance data and product, but also allows the users operate the virtual product as like as the actual product.", "mime": "application/pdf"}, {"id": "cet-6261", "words": "2937", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-6261", "date": null, "keywords": "indicators; maintenance; performance; process; smes; sub; work", "summary": "The only difference is the weight parameters definition w total jkjijk m k l k j S KpKpa w \u2217\u2217 = = =1 1 (1) where wj is the participation of the j type of maintenance process indicators in the total sum and total jkjijk m k n j jk S KpKpa w \u2217\u2217 = = =1 1 (2) where wjk is the participation of the jk type of maintenance sub process indicator in the total sum. In the second step, a model for ranking and optimization of maintenance process performance indicators and SMEs is presented.", "mime": "application/pdf"}, {"id": "cet-6262", "words": "2665", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-6262", "date": null, "keywords": "degradation; failure; figure; process; records; time", "summary": "Compared to existing stochastic degradation models, the model stated in this paper is different from 3 aspects. 1. Introduction Estimating the residual useful life (RUL) from degradation records is a core issue in many fields, e.g. nuclear plant, aeronautical industry, mechanical engineering etc.", "mime": "application/pdf"}, {"id": "cet-6263", "words": "3535", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-6263", "date": null, "keywords": "gaussian; inverse; model; process; t t", "summary": "i i ti t t t t i t t t t vt tp y y b b t t v v \u03bb\u03bb\u03bb \u03c0 \u2212\u2212=", "mime": "application/pdf"}, {"id": "cet-6264", "words": "2937", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-6264", "date": null, "keywords": "basis; block; estimates; model; rul; value; walk", "summary": "Random walk model of finite segments of the wavelet coefficients of observed signal is considered as the original model. Therefore, the paper discusses the issue about prognosis of changing the conditions of applicability of random walk models.", "mime": "application/pdf"}, {"id": "cet-63", "words": "4334", "extension": ".pdf", "flesch": "53", "author": "Isafiade, A.J.", "title": "Multi-Period Heat Exchanger Network Design Based on Periodic Heat Storage Approach ", "date": "2017", "keywords": "cost; exchanger; heat; hp3; hu2; network; period; process; storage", "summary": "This paper presents an extension to existing methods in the literature for synthesizing multi-period heat exchanger networks by designing networks that make provision for periodic storage of heat for use in succeeding periods of operations. The simultaneous methods that have been used for the synthesis of multi-period heat exchanger networks include the approach of Verheyen and Zhang (2006) where the multi-period version of the stage-wise superstructure (SWS) of Yee and Grossmann (1990) was adopted.", "mime": "application/pdf"}, {"id": "cet-6358", "words": "3040", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-6358", "date": null, "keywords": "data; distribution; failure; gpm; prior; rul; test; type", "summary": "The remaining novel method involved Bayesian analysis under restrictions of data availability, and utilizing prior RUL distributions, whether Type I or II. The X is appended with an identity matrix, with ones representing the parameters for which prior distributions exist.", "mime": "application/pdf"}, {"id": "cet-6359", "words": "3158", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-6359", "date": null, "keywords": "data; points; regression; set; time; training; variables", "summary": "DOI: 10.3303/CET1333152 Please cite this article as: Vitelli V., Zio E., 2013, Approximate gaussian process regression with sparse functional learning of inducing points for components condition monitoring, Chemical Engineering Transactions, 33, 907-912 DOI: 10.3303/CET1333152 907 Concerning the computational aspects, the training cost for a GP has complexity, where is the number of training data points (Storlie et al., 2009). 908 We, thus, introduce a set of inducing variables , a set of latent variables which correspond to the evaluations of the GP at a set of given locations , also called inducing points.", "mime": "application/pdf"}, {"id": "cet-6360", "words": "4228", "extension": ".pdf", "flesch": "35", "author": null, "title": "cet-6360", "date": null, "keywords": "advsmr; assessment; components; condition; designs; equipment; monitors; plant; reactors; risk; risk monitors; time", "summary": "Martorell S., Marton I., Villamizar M., 2010, Reliability of safety systems and probabilistic risk assessment, Chemical Engineering Transactions, 19, 321-326, DOE:10.3303/CET1019053 Medina H., Arnaldos J., Casal J., 2011, Risk-based inspection and its application to the optimization of chemical plants, Chemical Engineering Transactions, 25, 201-206, DOI:10.3303/CET1125034 NRC, 2012, Probabilistic risk assessment (PRA) <www.nrc.gov/about-nrc/regulatory/risk- informed/pra.html> accessed 17.01.2012. \u201cRisk monitors\u201d extend the PRA by incorporating the actual and dynamic plant configuration (equipment availability, operating regime, environmental conditions, etc.) into risk assessment.", "mime": "application/pdf"}, {"id": "cet-6361", "words": "2685", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-6361", "date": null, "keywords": "analysis; components; load; series; singular; spectrum; ssa; time", "summary": "Yes 7.0 1.26 References Alexandrov Th., Golyandina N., 2005, Automatic extraction and forecast of time series cyclic components within the framework of SSA, Proceedings of the Fifth Workshop on Simulation, June 26-July 2, 2005, St. Petersburg State University, St. Petersburg, 45\u201350. Brice\u00f1o H., 2012, Comparing time series techniques for electric load demand, MSc.", "mime": "application/pdf"}, {"id": "cet-6362", "words": "3413", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-6362", "date": null, "keywords": "data; input; interval; power; prediction; step; values; wind", "summary": "As for future research, the use of different approaches for better interval representation of wind power data will be explored to further increase the accuracy of the predictions. The results obtained show that NNs are promising for handling interval input data accounting for uncertainties.", "mime": "application/pdf"}, {"id": "cet-6363", "words": "3246", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-6363", "date": null, "keywords": "data; energy; failure; maintenance; turbines; wind", "summary": "Occurrence: Which is a qualitative mode to measure the failure rate \u2022 Detection: Which talks about the ability to detect the failure before it appears on the asset Table 2 RPN by wind turbine system (Arabian-Hoseynabadi, 2010) Order System RPN 1 Rotor and blades assembly 1609 Gray, C.S. & Watson, S.J. 2010, Physics of failure approach to wind turbine condition based maintenance, Wind Energy, vol. 13, no. 5, pp.", "mime": "application/pdf"}, {"id": "cet-6364", "words": "2642", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-6364", "date": null, "keywords": "fault; min; model; time; value", "summary": "To reduce the downtime of wind turbines, fault detection systems are already widely used but more research and development need to be done. Fault detection will prevent extensive damage in case of a fault and create time to react to faults, for example, to prepare inspections and/or to purchase spare parts.", "mime": "application/pdf"}, {"id": "cet-6365", "words": "3560", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-6365", "date": null, "keywords": "battery; conditions; dod; model; parameters; sensitivity; value", "summary": "Wang et al. (2012) used model simulation to exam parameter sensitivity and Srinivasulu et al. Because it is very difficult to identify the large amount of parameters quickly and accurately, a step-by-step method along with parameter sensitivity analysis (Alexander et al., 2010) was proposed.", "mime": "application/pdf"}, {"id": "cet-6366", "words": "3484", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-6366", "date": null, "keywords": "batteries; battery; characteristics; discharge; ion; lithium; model; parameters; power; simulation; sources", "summary": "The parameters of battery model are called internal characteristics. 950 2. Stage one: preparation 2.1 Mathematical models and their numerical solutions Mathematical modeling of lithium ion batteries involves defining the dependant variables and their respective governing equations (usually a combination of partial differential equations) along with necessary boundary and initial conditions (Vinten, 2009).", "mime": "application/pdf"}, {"id": "cet-6367", "words": "3225", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-6367", "date": null, "keywords": "battery; conditions; figure; generation; heat; model; rate; temperature", "summary": "It is thus important to monitor battery temperature for prevention of the battery failure. In this Section, we develop temperature prediction model with the two methods, one by the computer simulation and the other by the ANN.", "mime": "application/pdf"}, {"id": "cet-6368", "words": "2988", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-6368", "date": null, "keywords": "charge; health; reliability; state", "summary": "In this paper, charge cycles of a battery are analysed, and the profust reliability is employed to estimate battery health state as a health indicator. In order to consider both ( )u t and ( )i t , battery charge capacity is used as an assessable index in battery health estimation, which is defined in Eq.(1) ( ) ( ) ( ) 0 t W t u", "mime": "application/pdf"}, {"id": "cet-6369", "words": "2812", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-6369", "date": null, "keywords": "circuit; equipment; fault; power; switch; transfer", "summary": "Figure 2: relationship of power supply system, power transfer equipment and loads Relationship of power supply system, power transfer equipment and loads is displayed in Figure 2. Therefore, power transfer equipments are widely used to insure an uninterrupted capacity of power supplying as soon as the faults or failures happen to power supply system.", "mime": "application/pdf"}, {"id": "cet-6370", "words": "2839", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-6370", "date": null, "keywords": "analysis; cause; cnc; failure; fault; mode; system", "summary": "The histogram of soft failure module of CNC system From Table 2, the weak modules is listed as follow: feed servo system (28.05 %), which includes X, Y, Z axis feed servo controller, servo encoder etc., real-time management module (19.51 %), Motherboard (13.41 %). Defects which influence reliability of CNC system most are found out at last and it has a positive impact on CNC system products design, manufacture and use.", "mime": "application/pdf"}, {"id": "cet-6371", "words": "2425", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-6371", "date": null, "keywords": "actuator; control; degradation; lqr; stress; system", "summary": "In the field of control systems, the term degradation is related to a loss of effectiveness to fully implement when the actuator is in a faulty situation and not to an intrinsic physical deterioration. Introduction In feedback control systems, the actuators are of prime importance because they represent the physical link between the control law and the governed process.", "mime": "application/pdf"}, {"id": "cet-64", "words": "2629", "extension": ".pdf", "flesch": "41", "author": "Aziz, M.; Oda, T.; Morihara, A.; Kashiwagi, T.", "title": "Production of Ammonia from Low Rank Coal Employing Chemical Looping and Haber-Bosch Process ", "date": "2017", "keywords": "chemical; efficiency; energy; nh3; power; production", "summary": "Based on the above background, NH3 production system from LRC with high total energy efficiency but low CO2 emission is demanded. Figure 2: Process flow diagram of proposed NH3 production system from LRC.", "mime": "application/pdf"}, {"id": "cet-65", "words": "3920", "extension": ".pdf", "flesch": "50", "author": "Ma, J.; Zhao, Z.; Liu, P.; Li, Z.", "title": "A Modelling Approach to Supply and Demand of Gasoline in the Passenger Car Sector in China up to 2030 ", "date": "2017", "keywords": "cars; china; consumption; diesel; gasoline; passenger; passenger cars; ratio", "summary": "(a) (b) Figure 2: (a) Stock of private and business passenger cars from 2015 to 2030 and (b) Stock of taxi from 2015 to 2030 0 10,000 20,000 30,000 40,000 50,000 S to c k (1 0 ,0 0 0 ) Gasoline CNG EV PHEV 0 20 40 60 80 100 120 140 S to c k (1 0 ,0 0 0 ) Gasoline CNG EV 88 The results indicate that the sale ratio of gasoline passenger car is 68.4 %, the 3 % of CNG, 27.4 % of PE and 1.1 % of PHEV in 2030. (1) The stock of passenger cars using gasoline is determined by the total passenger cars and the ratio of gasoline passenger cars.", "mime": "application/pdf"}, {"id": "cet-6571", "words": "2824", "extension": ".htm", "flesch": "54", "author": "Yusoff Azudin, N.; Mat Don, M.; Abdul Shukor, S.R.", "title": "Production and Kinetics of Isoamyl Acetate from Acetic Anhydride using Candida Antarctica Lipase B in a Solvent-Free System", "date": "2013", "keywords": "acetate; acid; alcohol; enzyme; isoamyl; reaction; temperature", "summary": "The tested parameters were reaction temperature (30-50 \u00b0C), acid-alcohol molar ratio (0.1-2) and mass of enzyme (4- 12 %). The simplest kinetic model applied to describe lipase catalyzed reaction is based on Michaelis-Menten mechanism(Richardson and D.B, 1985).", "mime": "application/pdf"}, {"id": "cet-6572", "words": "3442", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-6572", "date": null, "keywords": "activity; enzyme; ethyl; lipase; molar; solvents; synthesis; valerate", "summary": "After this period, the immobilized enzyme activity with and without heptane showed no change until the 13th day and then there was a decrease of the enzyme with the solvent, where on the 30th, the fall in immobilized enzyme activity in organic solvent was about 30 % compared with the control (Figure 1). One unit of enzyme activity was defined as \u00b5mol of acid released per min under the assay conditions.", "mime": "application/pdf"}, {"id": "cet-6573", "words": "2695", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-6573", "date": null, "keywords": "adsorption; albumin; bilirubin; carbon; solutions; toxins; tryptophan", "summary": "The calibration line was obtained by taking account of bilirubin adsorption at the same wavelength. The albumin concentration was assumed as constant during each experimental test because a previous study showed that albumin adsorption on the activated carbon considered in this work is negligible (Annesini et al., 2008).", "mime": "application/pdf"}, {"id": "cet-6574", "words": "2169", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-6574", "date": null, "keywords": "bagasse; enzyme; ethanol; fermentation; production; sugarcane; whey", "summary": "Figure 3: Ethanol concentrations for the formulations B16, B20 and B25 containing 16, 20 and 25 % (160, 200 and 250 g/L) of exploded sugarcane bagasse The Figure 4 represents ethanol production using the formulations B20 and enzyme complex produced in MPTE3 condition of extraction with replace of acid hydrolysis by enzymatic hydrolyzed milk whey. The use of cheese whey to extract enzyme complex increased the ethanol production in 20.4 % compared to a control test using water in place of cheese whey and the use of hydrolyzed cheese whey increased ethanol production in 55.1 % compared to water extraction.", "mime": "application/pdf"}, {"id": "cet-6575", "words": "3228", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-6575", "date": null, "keywords": "4np; biodegradation; compounds; concentration; kinetic; model; tests", "summary": "For MIX1 it was observed a faster biodegradation of 4NP compared to the other substrate, thus confirming the results of single compound tests. A quantitative estimation of this effect is given by the k values: for 2,4DCP k value decreased by 35% with respect to single compound tests, while for 4NP a mean reduction of 80 % is observed.", "mime": "application/pdf"}, {"id": "cet-6576", "words": "2819", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-6576", "date": null, "keywords": "cell; electrospinning; electrospun; engineering; polymer; scaffolds; solution; tissue", "summary": "Biodegradable and biocompatible PUs were then electrospun to obtain non-fibrous surfaces with high porosity and interconnectivity. A publication of The Italian Association of Chemical Engineering Online at: www.aidic.it/cet Chief Editors: Sauro Pierucci, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2013, AIDIC Servizi S.r.l., ISBN 978-88-95608-23-5; ISSN 1974-9791 Poly (\u03b1-Hydroxy Ester-Urethane) Based Electrospun Biomaterials for Tissue Engineering Nilhan Kayaman-Apohana,*, Emrah \u00c7akmak\u00e7\u0131a, \u00c7i\u011fdem \u00c7i\u00e7eka, Memet V. Kahramana, Mehmet Arslanb, Serap Erdem Kurucab a Marmara University, Department of Chemistry, 34722 Goztepe-Istanbul, Turkey b Istanbul University, Istanbul Medical Faculty, Department of Physiology, 34390 Capa-Istanbul, Turkey napohan@marmara.edu.tr Generally fibrous mats are produced via electrospinning and utilized as tissue engineering scaffolds.", "mime": "application/pdf"}, {"id": "cet-6577", "words": "3034", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-6577", "date": null, "keywords": "al2o3; alkanes; atoms; carbon; catalyst; conversion; oil; products", "summary": "Table 1: Composition of products of rape oil conversion under optimal conditions Rape oil conversion products Product composition, wt % 360\u00b0C , 1.2 h\u20131 420\u00b0C, 2.4 h\u20131 \u04211 0.54 1.04 \u04212 4.89 4.83 C2= 0.18 0.32 C3 11.71 10.79 C3= 0.37 0.75 iso-C4 9.50 5.88 n-\u04214 5.30 2.19 C4= 1.49 1.81 iso-\u04215 9.91 4.52 n-C5 2.60 1.46 \u04215= 0.66 1.12 2,3-Me-C4 1.09 0.45 iso-C6 2.04 0.94 n-C6 3.40 0.72 Benzene 7.04 6.56 Toluene 16.92 18.42 Ethylbenzene 3.79 4.81 o,p-Xylene 9.24 13.06 m-Xylene 2.23 3.15 Propylbenzene 0.00 0.94 Methylethylbenzene 4.16 5.93 1,2,3-Trimethylbenzene 0.80 1.40 Methylphenylethylene 0.61 1.01 1,2-Diethylbenzene 0.00 1.61 \u03b1-Phenyl-\u03b2-ethylethylene 0.00 0.96 Naphthalene 0.00 1.16 \u03b1-Methylnaphthalene 0.63 1.40 \u0421\u041e 0.58 2.55 \u0421\u041e2 0.33 0.21 \u03a3 100.00 100.00 Application of Pt/Al2O3 allows to improve the efficiency of rape oil conversion towards valuable hydrocarbons in comparison with Ni containing catalysts described by Mikulec J. et al., 2009 and Kov\u00e1cs S. et al., 2010 due to realization of process in one step and also reducing the loss of valuable carbon mass via glycerol and acyl fragments condensation.", "mime": "application/pdf"}, {"id": "cet-6578", "words": "2267", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-6578", "date": null, "keywords": "adsorbent; adsorption; bsa; concentration; equilibrium; hildmannianus; peel", "summary": "Table 1: Pseudo-second-order kinetic parameters for BSA adsorption by C. hildmannianus peel Concentration (mg mL-1) qe,exp (mg g-1) k2 (x 10-5) (g mg-1 min-1) qe,cal (mg g-1) h (mg g-1 min-1) Equilibrium adsorption isotherms were satisfactorily described by Langmuir model.", "mime": "application/pdf"}, {"id": "cet-6579", "words": "3315", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-6579", "date": null, "keywords": "activity; enzyme; galactosidase; glutaraldehyde; immobilization", "summary": "One unit of enzyme activity was defined as the amount of reducing sugar produced per liter, per minute and per gram of protein, according to the Equation 1. So, the activation of Duolite A-568 with glutaraldehyde 1 % (v/v) is advantageous since it does not provide significant losses in enzyme activity and it improves the operational stability in about 12 %.", "mime": "application/pdf"}, {"id": "cet-6580", "words": "2769", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-6580", "date": null, "keywords": "kms; \uf0e7 \uf0e7", "summary": "Kinetic model The proposed model was developed based on the following assumptions: \u2022 Simultaneous production of \u03b2\u2212 and \u03b3\u2212CD: this model considers that the way in which the substrate binds to the enzyme (ES\u03b2 or ES\u03b3) determines what will be the product formed; \u2022 Reversible reaction: the cyclodextrins produced bind again to the enzyme for producing linear dextrins (coupling reaction, which is thus a reverse reaction to cyclization); \u2022 Single substrate: The substrate is the maltodextrin (a mixture of maltooligosaccharides), which is considered as if it were a single type of molecule. Literature shows that different kinetic models have already been proposed for the CD production, however, these models did not take into account the reversibility of the cyclization reaction and many side reactions 1111 that occur at same time.", "mime": "application/pdf"}, {"id": "cet-6581", "words": "3374", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-6581", "date": null, "keywords": "biomass; co2; concentration; conditions; cultures; depth; photobioreactors; production", "summary": "Present contribution moves one step further along the direction of investigating the effects of photobioreactor depth on biodiesel production by S. bacillaris. Bubble column photobioreactors (Figure 1) were prism with rectangular cross section.", "mime": "application/pdf"}, {"id": "cet-6582", "words": "3402", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-6582", "date": null, "keywords": "alginate; chitosan; co2; drying; figure; pva; tissue; water", "summary": "(Tsiventzelis et al., 2007), supercritical foaming (Mooney et al., 1996), supercritical gel drying combined with particulate leaching (Reverchon et al., 2008), electrospinning in SC-CO2 (Lee et al., 2007). Hydrogels used in TE applications are typically degradable, can be processed under relatively mild conditions, have mechanical and structural properties similar to many tissues and to the ECM, and can be delivered in a minimally invasive manner (Lee et al., 2001).", "mime": "application/pdf"}, {"id": "cet-6583", "words": "3803", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-6583", "date": null, "keywords": "acid; bsae; concentration; enzyme; urea; urease", "summary": "In the case of acid urease immobilised onto Eupergit\u00ae C250L in the same range of urea concentrations, the ammonia formation rate (r\u2019A) for immobilised acid urease referred to liquid volume was reconstructed by using the Michaelis-Menten kinetic model too: LMa L ' max' A SK S V r + = ( 4) with V\u2019max = k\u2019cat cPi ( 5) cPi = cBd YP/B ( 6) where V\u2019max is the maximum ammonia formation kinetic rate constant for immobilised enzyme, KMa or k\u2019cat the apparent Michaelis constant or specific ammonia formation kinetic rate constant for immobilised enzyme, cPi the bulk Bradford protein concentration for immobilised enzymes, cBd the bulk concentration of dry beads and YP/B [I U /g d s] Figure 1: Effect of urea concentration (SL) on the specific ammonia formation rate of (A) free enzyme (\u03c0AE: \uf0da) at a free enzyme concentration (cPF) of 4.2 mg BSAE/L and (B) immobilised derivatives (\u03c0AB) with different enzyme loadings and immobilised enzyme concentrations: \uf0a2, YP/B = 48 mg BSAE/g ds and cBd = 0.11 mg BSAE/L; \uf0bf, YP/B", "mime": "application/pdf"}, {"id": "cet-6584", "words": "2004", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-6584", "date": null, "keywords": "ethanol; fermentation; l-1; lactose; model", "summary": "*mpoletto@unisa.it A kinetic model for ethanol fermentation of lactose using yeast Kluyveromyces marxianus DSMZ 5422 is proposed. This assumption corresponds to the hypothesis that the stop in ethanol fermentation does not bring any change in the biomass growth and lactose consumption. II)", "mime": "application/pdf"}, {"id": "cet-66", "words": "3627", "extension": ".pdf", "flesch": "48", "author": "Gao, W.; Feng, X.", "title": "The Optimal Model of a Fluid Machinery Network in a Circulating Water System ", "date": "2017", "keywords": "cost; energy; fluid; machinery; network; pressure; pump; system; water", "summary": "2.4 Superstructure of fluid machinery network in a circulating water system The optimization of a fluid machinery network in a circulating water system actually is the optimization of both the pump network and water turbine network of the circulating water system simultaneously, and the superstructure of the fluid machinery network is shown in Figure 1(4). Pressure distribution analysis on circulating water pump networks.", "mime": "application/pdf"}, {"id": "cet-6679", "words": "2058", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-6679", "date": null, "keywords": "ambient; carbon; cryogenic; grinding; tyres; waste", "summary": "Activated carbons are materials composed mainly of carbon, and have a high adsorption capacity; this is due essentially to their large surface areas and to their highly developed microporous texture. Activated carbons can be obtained from carbon-rich materials of plant, animal or mineral.", "mime": "application/pdf"}, {"id": "cet-6680", "words": "2709", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-6680", "date": null, "keywords": "blends; cm-1; fungi; growth; ldpe; samples; starch; tapioca", "summary": "In this study, biodegradable LDPE and tapioca starch blends were formulate via injection moulding processes with addition of compatibilizer and glycerol as processing aid. roshafima@cheme.utm.my In this research, the renewable source, tapioca starch (TS) is used as the subject to improve the degradability of injection moulded plastic packaging.", "mime": "application/pdf"}, {"id": "cet-6681", "words": "3155", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-6681", "date": null, "keywords": "acid; alloy; behaviour; corrosion; film; phosphoric; resistance; solution; temperature", "summary": "The corrosion potentials (Ecorr), corrosion current densities (icorr), passive current density (ip) and transpassive potential (Etr) were obtained from the potentiodynamic polarisation curves and the numerical values are summarized in Table 1. Table 1: Electrochemical parameters of Alloy 31 in the contaminated 40 wt.% H3PO4 solution at different temperatures after passive film formation at 0.5 VAg/AgCl. Table 2: Electrical parameters obtained by fitting the experimental results of EIS for Alloy 31 in the contaminated 40 wt.% H3PO4 solution at different temperatures after passive film formation at 0.5 VAg/AgCl.", "mime": "application/pdf"}, {"id": "cet-6682", "words": "2705", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-6682", "date": null, "keywords": "composite; epoxy; hemp; impact; life; production; resin", "summary": "Use phase: The following assumptions were specified: - The running capacity during the use phase is 200,000 km (10 y). - Fuel reduction coefficients on gasoline powered vehicles: 0.3 L/(100 kgx100 km) for a lighter car (lower limit), 0.5 L/(100 kgx 100 km) for a heavier car (upper limit). - Weight reduction for a single basic component amounts to 280 g using hemp fibre composites. 2. Scope and goal definition The present work is a comparative life cycle study in order to evaluate the main environmental impacts associated to the production of an automotive interior side panel made of plant-based epoxy resin as hemp fibre as reinforcement in comparison with petroleum-based composite.", "mime": "application/pdf"}, {"id": "cet-6683", "words": "3655", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-6683", "date": null, "keywords": "aggregates; beer; dm3; ebc; flux; membrane; turbidity; unit", "summary": "[min] Jv [d m 3 m -2 h-1 ] Figure 2: Time course of the permeation flux (Jv) of rough beer samples as such (\uf072, 18 EBC unit), precentrifuged (\uf0b8, 1.5 EBC unit) or after enzymatical and centrifugal pretreatments (\uf06f, 0.9 EBC unit) under constant TMP (3.74 bar), vS (6 m/s), temperature (10 \u00b0C), and periodic CO2 back-flushing. A) B) 1732 To discriminate the fouling mechanisms, the flux decline behaviour during rough beer microfiltration can be examined by estimating the time course of the overall resistance (RT) to filtrate flow as follows: vP T J \u03b7 TMP R = (3) where \u03b7P is the permeate viscosity, and TMP the transmembrana pressure difference. The quasi steady-state flux (Jv,ss) was reached after about 1 h, independently of the turbidity (H) of rough beer.", "mime": "application/pdf"}, {"id": "cet-6684", "words": "3450", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-6684", "date": null, "keywords": "beer; content; dealcoholization; ethanol; feed; membrane; process; solutions; stripping; transfer; vol", "summary": "During beer dealcoholization, ethanol flux was measured and the values were compared with those of hydroalcoholic solutions at the same concentrations estimated by means of empirical correlations (Eq. This work presents a preliminary study on the production of alcohol free beer (alcohol content \u2264 0.5 %vol) by osmotic distillation technique, which allows to operate at low temperature and atmospheric pressure, using water as ethanol stripping agent.", "mime": "application/pdf"}, {"id": "cet-6685", "words": "4367", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-6685", "date": null, "keywords": "adsorption; bentonite; clay; compounds; ethyl; model; odor; samples; surface; wine", "summary": "In terms of adsorption capacity KF, on clay B the most hydrophobic molecule (i.e. ethyl octanoate) was adsorbed less than ethyl hexanoate, while on both the other clays ethyl octanoate showed a very high and greater KF value than ethyl hexanoate. They showed high adsorption capacity especially with hydrophobic molecules.", "mime": "application/pdf"}, {"id": "cet-6686", "words": "2626", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-6686", "date": null, "keywords": "acids; alcohols; fatty; oil; steam; temperature; wax", "summary": "Therefore, present research work was carried out for studying the decomposition of the dewaxing residue of rice bran oil in a mixture of fatty acids and fatty alcohols under low pressure, high temperatures and the injection of stripping steam. Therefore, present research work was carried out for studying the decomposition of the dewaxing residue of rice bran oil in a mixture of fatty acids and fatty alcohols under low pressure, high temperatures and the injection of stripping steam.", "mime": "application/pdf"}, {"id": "cet-6687", "words": "2248", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-6687", "date": null, "keywords": "approach; case; design; fluid; mixer; newtonian; shape; static", "summary": "Figure 1: Initial static mixer configurations: a) HEV mixer, b) coaxial static mixer The first configuration (Figure 1a) is allowed to change the fin height h and inclination a in the streamwise direction, while the second one is mapped into cylindrical coordinates and is free to change the shape of the blade, up a to a limit angle of b=60\u00b0 respect to the streamwise flow.. In fact, the effect of Reynolds number is relevant depending on mixer configuration (Kumar 2007).", "mime": "application/pdf"}, {"id": "cet-6688", "words": "2391", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-6688", "date": null, "keywords": "content; drying; fickian; figure; food; kinetics; model", "summary": "abessadok@ksu.edu.sa This work deals with the study of drying kinetics of high water content materials such as agro-food particles. 4. Conclusion This study proposed a method to adequately characterize drying kinetics of high water content agro-food materials (e.g. carrot particles).", "mime": "application/pdf"}, {"id": "cet-6689", "words": "3360", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-6689", "date": null, "keywords": "control; development; dough; leavening; mixing; time; volume; water; wheat", "summary": "The dough development time was significantly higher (p < 0.05) in the AG enriched doughs than in the control, whereas the Mixing Tolerance Index and elasticity was significantly less (p < 0.05) for control in relation to AG enriched doughs which indicates that the enrichment with AG may weaken the dough. a) b) d)c) 1767 The dough development time (DDT) was significantly higher (p < 0.05) in AG enriched doughs at 3 % and 5 % addition levels than in 1 % AG dough and the control.", "mime": "application/pdf"}, {"id": "cet-6690", "words": "3295", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-6690", "date": null, "keywords": "encapsulation; food; limonene; membranes; pullulan; release; volatile", "summary": "Figure 1: Macroscopical appearance of the membranes (left top); scanning electron micrographs of nanofibrous membranes under magnification 2 KX (right top) and 20 KX (bottom). This simple technique enables the production of nanofibrous polymeric membranes, using electric fields to spin polymer fibers with diameters ranging from hundreds to tens of nanometers (Frenot and Chronakis, 2003).", "mime": "application/pdf"}, {"id": "cet-6691", "words": "2883", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-6691", "date": null, "keywords": "bixin; degradation; drying; food; gum; light; microencapsulation; spray; stability", "summary": "Bixin is a lipid- soluble substance, however, in encapsulated form on Arabic gum and maltodextrin, it had a water solubility of 72 %. As examples of techniques employed in the microencapsulation of food ingredients on may mention extrusion, fluidized bed, coacervation, lyophilization, spray drying, spray cooling, molecular inclusion, inclusion in liposomes (Azeredo, 2005); Spray drying technique is the most commonly used technique in the food industry on account of its cost- effectiveness, easy availability of equipment and low production costs, especially when compared to most other techniques (Barros and Stringheta, 2006).", "mime": "application/pdf"}, {"id": "cet-67", "words": "2813", "extension": ".pdf", "flesch": "58", "author": "Liu, Y.; Wang, J.; Wang, W.; Yang, R.; Min, C.; Sunden, B.", "title": "Effect of the Burner Arrangement on Slab Reheating Characteristics in a Reheating Furnace ", "date": "2017", "keywords": "case; furnace; reheating; section; slab; temperature; \uf0b6 \uf0b6", "summary": "The Case-B shows the highest volume averaged slab temperature and the best reheating efficiency. Han et al. (2011) calculated radiation heat exchanges by using the finite volume method, and they also calculated slab temperature field with the transient heat conduction equation.", "mime": "application/pdf"}, {"id": "cet-68", "words": "3410", "extension": ".pdf", "flesch": "41", "author": "Qin, Z.; Tang, K.; Wu, X.; Yu, Y.; Zhang, Z.", "title": "Product-based Carbon Constraint Energy Planning with Pinch Analysis for Sustainable Methanol Industry in China ", "date": "2017", "keywords": "carbon; coal; constraint; emission; energy; industry; methanol; production; routing", "summary": "Considering the various technological sources and predictable product demand in methanol production industries, this paper presents the method of Product-based Carbon Constraint Energy Planning (PCEP) combined with improved GM(1,1) model to analyse the practical interaction between energy demand and carbon emission for methanol industry in 2020 in China. Aiming to investigate the interaction between energy supply and carbon emission, Pinch Analysis has been widely extended in the fields of energy planning.", "mime": "application/pdf"}, {"id": "cet-686", "words": "3658", "extension": ".pdf", "flesch": "44", "author": "Pan, Xiongfeng; Zhang, Jing; Li, Changyu; Pan, Xianyou", "title": "Analysis of China\u2019s Regional Wind Power Generation Efficiency and its Influencing Factors ", "date": "2018", "keywords": "efficiency; energy; generation; generation efficiency; power; power generation; region; wind; wind power", "summary": "In order to objectively evaluate the current situation of wind power generation in China and identify the key factors, based on the data of 30 Chinese provinces from 2011 to 2014, this study use a meta-frontier data envelopment analysis (DEA) model and a symbolic regression method to study wind power generation efficiency and its influencing factors. (3) Technical progress has the most impact on wind power generation efficiency, followed by carbon regulation, while wind energy reserve has the least impact on wind power generation efficiency.", "mime": "application/pdf"}, {"id": "cet-687", "words": "3089", "extension": ".pdf", "flesch": "46", "author": "Oudghiri, Imane; Tinoco, Rodrigo R.; Bouallou, Chakib", "title": "Exergy Analysis, Optimization Approach and Transient Mode Operation Study of Non-Flammable Biomethane Liquefaction Process ", "date": "2018", "keywords": "biomethane; exergy; flow; gas; liquefaction; optimization; process; refrigerant; smr", "summary": "He T., Karimi I.A., Ju Y., 2018, Design and optimization of natural gas liquefaction processes for onshore and offshore applications, Energy, In Press. Due to the similarities between the biogas and NG, NG liquefaction processes are considered as reference to build adapted processes for biomethane.", "mime": "application/pdf"}, {"id": "cet-688", "words": "2345", "extension": ".pdf", "flesch": "32", "author": "Wongsapai, Wongkot; Damrongsak, Det; Malakrong, Parida", "title": "Factor Impacts and Target Setting of Energy Consumption in Thailand Sanitary Ceramics Industry ", "date": "2018", "keywords": "analysis; ceramics; consumption; energy; sanitary; sector", "summary": "Energy consumption of sanitary ceramics manufacture were collected from four factories, which consumed 75 % of energy consumption in sanitary ceramics sector. This sector has been proportion of energy consumption were thermal energy accounting 85 % and electrical 15 % of energy consumption.", "mime": "application/pdf"}, {"id": "cet-689", "words": "2486", "extension": ".pdf", "flesch": "57", "author": "Yanyongsak, Jaturaporn; Siemanond, Kitipat", "title": "Heat Exchanger Network Retrofit Under Fouling Effects with Cleaning Schedule ", "date": "2018", "keywords": "case; cleaning; fouling; heat; hen; model; retrofit; schedule", "summary": "In order to modify former stage-wise model to HEN retrofit model, the constraints for existing exchanger matches have to be added to the synthesis model. The objective function of HEN retrofit model is maximizing profit as a function of utilities saving revenue and total investment cost from additional area and new heat exchanger units.", "mime": "application/pdf"}, {"id": "cet-6894", "words": "3219", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-6894", "date": null, "keywords": "flame; hydrogen; methane; sarli; vortex; xh2", "summary": "The flame acceleration associated with the regime transition increases the rate of pressure rise (Di Sarli et al., 2009a; 2009b). In a more recent work (Di Sarli et al., 2012c), we used time-resolved Particle Image Velocimetry (PIV) to study transient interactions between hydrogen-methane/air premixed flames and simple toroidal vortex structures generated, in a controlled manner, at the wake of a circular orifice.", "mime": "application/pdf"}, {"id": "cet-6895", "words": "2662", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-6895", "date": null, "keywords": "hose; layer; surface; wall", "summary": "Within a range from 1 mm to 3 mm the potential US is more or less directly proportional the distance between spiral surface and inner wall surface independent on whether there is an earthed conductive wall on the outside of the hose or not. Within a range from 1 mm to 3 mm the potential UI does practically not depend on the distance between spiral surface and inner wall surface independent on whether there is an earthed conductive wall on the outside of the hose or not.", "mime": "application/pdf"}, {"id": "cet-6896", "words": "3865", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-6896", "date": null, "keywords": "case; damage; equipment; figure; flood; flooding; model; study; vessel", "summary": "40% 60% 80% 100% 0% 2% 4% 6% 8% 10% % S ur vi ve d ta nk s Filling level (%) Density of stored substance: 1000 kg/m3 Number of considered vessels: 116 Figure 2: Results of the validation for atmospheric vessels: fraction of the tanks able to withstand the reference flood impact as a function of the filling level. This phenomenon is described in detail in the literature (Timoshenko and Gere 1961) and typically affects atmospheric vessels.", "mime": "application/pdf"}, {"id": "cet-6897", "words": "3154", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-6897", "date": null, "keywords": "dust; energy; explosion; ignition; wire", "summary": "Figure 4: Flame propagation of exploding wire and pyrotechnical igniter for different ignition energies Figure 5: Explosion pressure of niacin as function of dust cloud concentration determined with pyrotechnical igniter and exploding wire with ignition energy of 500 J Figure 6: Explosion pressure rise of niacin as function of dust cloud concentration determined with pyrotechnical igniter and exploding wire with ignition energy of 500 J 707 Table 2: pmax, (dp/dt)max and KSt values for all tested dusts determined with exploding wire and pyrotechnical igniter with ignition energies of 100 J, 500 J, 1000 J and 10 kJ. Dust 100 J 500 J 1000 J 10 kJ Ex. Wire Pyro. 705 Table 1: Ignition energy of igniter determined with the isolation amplifier; ignition source isolating transformer; ignition energy 100 J Determined ignition energies Experiment- No. Outside the apparatus", "mime": "application/pdf"}, {"id": "cet-6898", "words": "3813", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-6898", "date": null, "keywords": "dryers; explosion; fire; hazards; heating; loss; material; process; product; spray", "summary": "Rotating drum dryers \u2022 \u2022 Flash or ring dryers \u2022 \u2022 Spray dryers \u2022 \u2022 Fluidized bed dryers 709 1.1 Drying operation hazards Dying operations present many hazards both from an operational standpoint to insure quality product is produced and from the safety aspect to insure there are no accidents that interrupt operations and harm employees. This also includes some information on incidents provided by a major manufacturer of process dryers.", "mime": "application/pdf"}, {"id": "cet-6899", "words": "3237", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-6899", "date": null, "keywords": "atmospheres; equipment; ignition; iso; protection; sources", "summary": "In the case of equipment related ignition sources the manufacturer has to decide whether those have the capability to ignite an explosive atmosphere i.e. to become potential ignition sources. In 2007 its subcommittee SC 31M \u201cNon-electrical equipment and protective systems 715 for explosive atmospheres\u201d was created to develop standards for non-electrical equipment and protective systems.", "mime": "application/pdf"}, {"id": "cet-69", "words": "2956", "extension": ".pdf", "flesch": "44", "author": "Tian, W.; Cui, Z.; Qin, H.; Li, L.", "title": "Conceptual Design of the Eastman Organic Wastewater Treatment Process ", "date": "2017", "keywords": "control; extraction; figure; process; scheme; simulation; treatment; wastewater", "summary": "Organic wastewater treatment methods proposed in the literature can be classified as biological degradation method and physical-chemical method respectively (Estrada et al., 2015). Finally, the optimum designing scheme of Eastman wastewater treatment process is determined with necessary parameters obtained from the experiment.", "mime": "application/pdf"}, {"id": "cet-690", "words": "2983", "extension": ".pdf", "flesch": "47", "author": "Polosin, Anton A.; Blank, Maria O.; Livencov, Sergey N.", "title": "Mathematical Modelling of MNUP-Fuel Production by the Carbothermic Synthesis Process for Fast Neutron Reactors ", "date": "2018", "keywords": "cts; fuel; furnace; model; reaction; synthesis; t t; zone", "summary": "A complete system of equations for CTS process model contains 23 equations. Conclusions The studying of problems and difficulties of CTS process model creation is the result of this paper.", "mime": "application/pdf"}, {"id": "cet-6900", "words": "2491", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-6900", "date": null, "keywords": "air; cloud; combustion; effect; explosions; flame; inhibitors; vapour", "summary": "To quantify the effects of flame inhibitors in congested petrochemical facilities and to design systems for deployment of flame inhibitor clouds in such a facility assuring a considerable reduction of the explosion loads it was suggested to use the dedicated CFD-model FLACS (Arntzen, 1998). This approach does not allow for describing deposition of flame inhibitor particles from the suspension.", "mime": "application/pdf"}, {"id": "cet-6901", "words": "2038", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-6901", "date": null, "keywords": "concentration; dust; ms t; sphere; t =", "summary": "It is noting that dust particles are partially entrained by the fluid flow. The Italian Association of Chemical Engineering Online at: www.aidic.it/cet Guest Editors: Eddy De Rademaeker, Bruno Fabiano, Simberto Senni Buratti Copyright \u00a9 2013, AIDIC Servizi S.r.l., ISBN 978-88-95608-22-8; ISSN 1974-9791 CFD Simulations of the Effect of Dust Diameter on the Dispersion in the 20 L Bomb Valeria Di Sarlia, Paola Russob, Roberto Sanchiricoa, Almerinda Di Benedetto*c aIstituto di Ricerche sulla Combustione, CNR, Via Diocleziano 328, 80124, Napoli (IT) bDipartimento di Ingegneria Industriale, Universit\u00e0 di Salerno, via Ponte don Melillo, 84084 Fisciano Salerno (IT) cDipartimento di Ingegneria Chimica, Universit\u00e0 degli Studi \u201cFederico II\u201d, Piazzale Tecchio 80, 80125, Napoli (IT) almerinda.dibenedetto@unina.it Prevention and mitigation measures for dust explosion are based on the knowledge of the thermo- kinetic parameters which characterise flammability such as Minimum Explosible Concentration, MEC, and explosion behaviour such as maximum explosion pressure, PMAX, and deflagration index, KSt.", "mime": "application/pdf"}, {"id": "cet-6902", "words": "2430", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-6902", "date": null, "keywords": "device; dust; explosion; flameless; flameless venting; process; protection; venting", "summary": "References Barton J., 2002, Dust explosion prevention and protection a practical guide, Institution of Chemical Engineers Bernard L., Brodie F., Ludwig D., Ness A., Weidner K., 1998, Vent access restriction for solids handling systems, Process Safety Progress, 17, 16-19 Crowhurst D., Colwell S.A., Hoare D.P., 1995, The external explosion characteristics of vented dust explosions, IChemE Symposium Series No 139, 79-96 Crowhurst D., Colwell S.A., 1995, Development of validated predictive methods so that the response of buildings and structures subjected to the effects arising from vented dust explosions can be, Dust Explosions, Protecting People, Equipment, Buildings and Environment, British Materials Handling Board, 355-396 Eckhoff, 2003, Dust explosions in the process industries, 3rd edition EN 16009, 2011, Flameless explosion venting devices Forcier T., Zalosh R., 2000, External pressures generated by vented gas and dust explosions, Journal of Loss Prevention in the Process Industries, 13, 411-417 Going J.E., Chatrathi K., 2003, Efficiency of flameless venting devices, Process Safety Progress, 22, 33- 42 Grossel S.S., 2012, Design and operating practices for safe conveying of particulate solids, Journal of Loss Prevention in the Process Industries, In Press Holbrow P., Hawksworth S.J., Tyldesley A., 2000, Thermal radiation from vented dust explosions, Journal of Loss Prevention in the Process Industries, 13, 467-476 Holbrow P., 2006, Explosion protection using flameless venting: a review, Health and Safety Laboratory (HSL), Explosion Safety Unit, Report No. EC/05/50 Holbrow P., 2011, Dust explosion venting research, IChemE Symposium Series No 156, 583-587 Holbrow P., 2012, Dust explosion venting of small vessels and flameless venting, Process Safety and Environment Protection, In Press NFPA 68, 2007, Standard on explosion protection by deflagration venting Schumann S., Haas W., Schmittberger H., Rasogi A.K., Fogt H., Friehmelt V., 1995, Measurement of pressure blast effects and fireball sizes from vented dust explosions: simulated experiments/large test cell, Dust Explosions, Protecting People, Equipment, Buildings and Environment, British Materials Handling Board, 244-291 Snoeys J., 2008, Dust explosion protection using flameless venting, Fike technical note Snoeys J., Going J.E., 2010, Flame arresting devices for dust explosions, 8th ISHPMIE, Yokohama, Japan, Paper 87 Snoeys J., 2012, Meeting explosion safety requirements with flameless venting, Powder and Bulk Engineering Taveau J., 2010, Correlations for blast effects from vented dust explosions, Journal of Loss Prevention in the Process Industries, 23, 15-29 Wirkner-Bott L., Schumann S., Stock M., 1992a, Flammen und Druckwirkung bei Explosionsdruckentlastung, VDI Berichte, 975 Wirkner-Bott L., Schumann S., Stock M., 1992b, Dust explosion venting: investigation of the secondary explosion, 7th International Symposium on Loss Prevention and Safety Promotion in the Process Industries, Taormina, Italy Wirkner-Bott L., Schumann S., Stock M., 1993, Dust explosion venting: secondary explosion for vessel volumes up to 250 m3, Europex NewsLetters, 22 Zalosh R., 2005, New developments in explosion protection technology, Fire and Emergency Services Asia, Singapore, 22-26 738 This detailed document specifies the requirements for flameless explosion venting devices, in terms of design, inspection, testing, marking, documentation and packaging.", "mime": "application/pdf"}, {"id": "cet-6903", "words": "2645", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-6903", "date": null, "keywords": "co2; coal; energy; ignition; minimum", "summary": "More recently experimental and theoretical studies have been made of coal combustion with emphasis on the behavior of the coal particle. Conclusion Knowledge of the phenomena occurring during coal combustion in oxygen enriched atmospheres is necessary for the reliable and efficient combustion of Oxygen/Coal/Recycled Flue Gas Mixtures.", "mime": "application/pdf"}, {"id": "cet-6904", "words": "2624", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-6904", "date": null, "keywords": "discharge; particles; phase; pressure; systems; venting", "summary": "It is shown that hydrophilic particles increase the mass discharge over time and reduce the pressure decrease over time by increasing the foaming of aqueous systems. In another study Wasan et al (2004) describe an increase of foaminess of systems with particles present and show that the effect is much stronger for biphilic particles than for hydrophilic particles.", "mime": "application/pdf"}, {"id": "cet-6905", "words": "2629", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-6905", "date": null, "keywords": "expert; functions; interim; method; panel; probit", "summary": "In order to estimate the number of deaths as a result of acute exposure to toxic chemicals, probit functions are used. Probit functions are derived from animal studies according to a specified method.", "mime": "application/pdf"}, {"id": "cet-691", "words": "3510", "extension": ".pdf", "flesch": "50", "author": "Gregor, Jiri; Kropac, Jiri; Pavlas, Martin", "title": "Sorting Line Modelling as an Integral Part of Complex Tools for Decision-making in Waste Management ", "date": "2018", "keywords": "fractions; line; management; model; paper; plastic; sorting; tool; waste", "summary": "Figure 2: Sorting line TE model simplified scheme According to state of the art it is very useful to prepared unique TE model which can describe the balance flow and economic view of sorting line facilities.", "mime": "application/pdf"}, {"id": "cet-692", "words": "3550", "extension": ".pdf", "flesch": "48", "author": "Martinez-Rodriguez, Guillermo; Fuentes-Silva, Amanda L.; Picon-Nunez, Martin", "title": "Targeting the Maximum Outlet Temperature of Solar Collectors ", "date": "2018", "keywords": "collectors; design; flow; inlet; network; rate; temperature", "summary": "Targeting for maximum temperature Knowledge of the maximum outlet temperature that a solar collector or series arrangement of solar collectors can reach for a given mass flow rate, solar radiation and inlet temperature, is a fundamental output that determines the feasibility of the application of low temperature solar plants. A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Timothy G. Walmsley, Petar S. Varbanov, Rongxin Su, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2018, AIDIC Servizi S.r.l. ISBN 978-88-95608-67-9; ISSN 2283-9216 Targeting the Maximum Outlet Temperature of Solar Collectors Guillermo Mart\u00ednez-Rodr\u00edguez, Amanda L. Fuentes-Silva, Mart\u00edn Pic\u00f3n-N\u00fa\u00f1ez* Department of Chemical Engineering, University of Guanajuato, Noria Alta S/N, Guanajuato, Gto., Mexico picon@ugto.mx The aim of this work is to show the construction and application of design curves for solar collector networks of the flat plate type.", "mime": "application/pdf"}, {"id": "cet-693", "words": "3161", "extension": ".pdf", "flesch": "47", "author": "Iervolino, Giuseppina; Vaiano, Vincenzo; Rizzo, Luigi", "title": "Visible Light Active Fe-doped TiO2 for the Oxidation of Arsenite to Arsenate in Drinking Water ", "date": "2018", "keywords": "as(iii; as(v; light; oxidation; tio2; water", "summary": "In particular, in the case of undoped TiO2 photocatalyst, the concentration of As(III) decreased up to 30 min of irradiation, reaching a As(III) conversion as low as 2%. Accordingly, the aim of this work was to investigate the photocatalytic oxidation of As(III) into As(V) through a Fe-doped TiO2 photocatalyst, synthesized by a facile method, active under visible light irradiation.", "mime": "application/pdf"}, {"id": "cet-694", "words": "3622", "extension": ".pdf", "flesch": "49", "author": "Souli, Ikbel; Liu, Xiaojun; Lendormi, Thomas; Chaira, Nizar; Ferchichi, Ali; Lanoiselle, Jean-Louis", "title": "Evaluation of Methane Production of Six Varieties of Date Pulp Waste (Phoenix Dactylifera L.) ", "date": "2018", "keywords": "content; correlation; date; methane; potential; production; sugars; total; varieties", "summary": "Over 2,000,000 t of date palm fruit wastes in the world are DOI: 10.3303/CET1870264 Please cite this article as: Souli I., Liu X., Lendormi T., Chaira N., Ferchichi A., Lanoiselle J.-L., 2018, Evaluation of methane production of six varieties of date pulp waste (phoenix dactylifera l.) , Chemical Engineering Transactions, 70, 1579-1584 DOI:10.3303/CET1870264 1579 mailto:thomas.lendormi@univ-ubs.fr discarded annually, leading to severe environmental problems (Mrabet et al., 2012). Some studies are related to the evolution of the substrates concentration and the characterization of the physico- chemical parameters of AD digesters in real time for the purpose of kinetic modeling of methane production.", "mime": "application/pdf"}, {"id": "cet-695", "words": "2861", "extension": ".pdf", "flesch": "42", "author": "Damrongsak, Det; Wongsapai, Wongkot; Thinate, Nattanee", "title": "Factor Impacts and Target Setting of Energy Consumption in Thailand\u2019s Hospital Building ", "date": "2018", "keywords": "consumption; energy; hospitals; model; regression; use", "summary": "Multiple linear regression has been executed to find the relationship between electrical energy consumption and various essential variables. Figure 2 shows relationships between electrical energy consumption and its related variables.", "mime": "application/pdf"}, {"id": "cet-696", "words": "3451", "extension": ".pdf", "flesch": "43", "author": "Varga, Geza; Eller, Zoltan; Hollo, Andras; Hancsok, Jeno", "title": "Fuels from Natural Fatty Acid Esters ", "date": "2018", "keywords": "acid; content; fatty; fuel; lard; oil; rapeseed; ratio; waste", "summary": "Pfister K. F., Baader S., Baader M., Berndt S., Goossen L.J.G., 2017, Biofuel by isomerizing metathesis of rapeseed oil esters with (bio)ethylene for use in contemporary diesel engines, Science Advances, 3, 1-7. The obtained product yield approached the theoretical yield \u2013 FAME: 85 \u2013 86 %, isoparaffin mixture: 84 \u2013 86 % - in case of 30 % pre-treated waste lard containing rapeseed oil feedstock.", "mime": "application/pdf"}, {"id": "cet-697", "words": "3449", "extension": ".pdf", "flesch": "44", "author": "Hernandez, Fabio; Erdocia, Xabier; Labidi, Jalel", "title": "Phenolic Monomers Production by the Direct Depolymerization of Lignin Contained in Kraft Black Liquor in the Presence of Metal Catalyst ", "date": "2018", "keywords": "catalyst; compounds; depolymerization; lignin; liquor; n.d; oil; reaction", "summary": "Table 3 shows the set of experiments performed as well as the experimental results determined for the dependent variables, all of them in % wt. respect to the organic matter in the liquor: oil, monomeric compounds and the undesirable solid residue. Guaiacol 0.201 0.305 0.191 0.173 0.341 0.195 0.739 0.117 0.127 0.127 0.528 Catechol 2.241 1.768 1.507 1.820 2.483 1.518 3.010 0.675 0.770 0.392 2.681 3-Methylcatechol 0.402 0.481 0.438 0.400 0.246 0.375 0.270 0.379 0.372 0.196 0.390 3-Methoxycatechol 0.024 0.066 0.028 0.022 0.104 0.045 0.224 0.022 0.019 0.012 0.147 4-Methylcatechol 1.942 2.372 2.037 2.031 1.977 1.992 2.322 1.694 1.521 0.902 2.775 Syringol 0.089 0.238 0.152 0.140 0.186 0.138 0.445 0.095 0.115 0.096 0.334 4-Ethylcatechol 0.811 0.952 0.942 0.761 0.685 0.736 0.722 0.809 0.807 0.490 0.911 Vanillin N.D. 0.003 0.003 N.D. 0.002 N.D. 0.004 N.D. N.D. N.D. 0.004 Acetovanillone 0.005 0.004 0.002 0.003 0.022 0.003 0.043 0.002 0.002 0.002 0.017 Veratrol N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. Guaiacylacetone 0.011 0.016 0.022 N.D. 0.034 N.D. 0.035 0.023 0.019 N.D. 0.006 Vanillic acid N.D. N.D. N.D. 0.008 N.D. 0.008 0.002 N.D. N.D. 0.013 N.D. Syringaldehyde N.D. N.D. 0.002 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. Acetosyringone 0.004 0.004 0.005 N.D. N.D. N.D. 0.002 N.D. N.D. N.D. 0.008 Syringic acid N.D. N.D. 0.024 0.002 0.008 0.002 0.021 N.D. N.D. N.D. N.D. Table 6 shows that the major compounds in all reactions was catechol and its derivatives 4-Methylcatechol and 4-Ethylcatechol.", "mime": "application/pdf"}, {"id": "cet-698", "words": "3461", "extension": ".pdf", "flesch": "47", "author": "Hrabec, Dusan; Somplak, Radovan; Nevrly, Vlastimir; Smejkalova, Veronika", "title": "Sustainable Model Integration of Waste Production and Treatment Process Based on Assessment of GHG ", "date": "2018", "keywords": "cost; function; management; prevention; production; recycling; waste; wte", "summary": "Figure 1: S-shaped function as a dependency between waste prevention cost and waste production amount 1604 2.2 Recycling Another important tool for the optimization of the integrated waste management system is recycling. The aim is to design the optimal waste management strategy, where stakeholders decide about the investment to the propagation of waste prevention and to advertising of waste recycling, and investors decide about new facility location and technological parameter.", "mime": "application/pdf"}, {"id": "cet-699", "words": "3354", "extension": ".pdf", "flesch": "46", "author": "Vasilenko, Violetta A.; Arkadeva, Irina N.; Bogdanovskaya, Vera A.; Fokina, Evgenia A.; Koltsova, Eleonora M.", "title": "Research and Mathematical Modelling of Direct Bioelectrocatalytic Oxygen Reduction by Laccase ", "date": "2018", "keywords": "electrode; enzyme; experimental; laccase; layer; model; oxygen", "summary": "There are some investigations where mathematical modelling and calculations were carried out with the help of commercial package software, e.g. CFD-ACE (Bedekar et al., 2007), COMSOL Multiphysics (Chan et al., 2012), ANSYS FLUENT (Mitrichev et al., 2016), FEM-LAB (Kjeang et al., 2006) or use for calculations the particular software (MATLAB) (Osman et al., 2013). (Koltsova et al., 2000); F, \u0421 mol-1 \u2013 Faraday constant; R, J mol-1 K-1 \u2013 universal gas constant; \u0422, \u041a \u2013 temperature.", "mime": "application/pdf"}, {"id": "cet-70", "words": "3087", "extension": ".pdf", "flesch": "49", "author": "Aviso, K.B.; Tan, R.R.", "title": "Fuzzy P-graph for Optimal Synthesis of Polygeneration Systems ", "date": "2017", "keywords": "energy; graph; optimization; polygeneration; process; systems", "summary": "Liu P., Gerogriorgis D.I., Pistikopolous E.N., 2007, Modeling and optimization of polygeneration energy systems. However, several optimization problems are multi-objective in nature and it will be advantageous to merge the intrinsic capability of P-graph in finding both optimal and near optimal solutions with the ability of simultaneously satisfying the multiple objectives.", "mime": "application/pdf"}, {"id": "cet-700", "words": "3884", "extension": ".pdf", "flesch": "56", "author": "Putna, Ondrej; Janos\u0165ak, Frantisek; Pavlas, Martin", "title": "Modelling of Existing Heating Plant Replacement with a Waste to Energy Plant and a Peak-Load Natural Gas Boiler ", "date": "2018", "keywords": "capacity; costs; demand; dhs; energy; gfbs; heat; waste; wtep", "summary": "One of the DOI: 10.3303/CET1870270 Please cite this article as: Putna O., Janos\u0165ak F., Pavlas M., 2018, Modelling of existing heating plant replacement with a waste to energy plant and a peak-load natural gas boiler , Chemical Engineering Transactions, 70, 1615-1620 DOI:10.3303/CET1870270 1615 benefits of low capacity WtE is that they may be established even in locations with low heat demands. White area (see Figure 2) concerning small DHS and large capacity WtEP illustrates situations when efficiency R1 is likely to be insufficient due to low heat demand; that\u2019s why they weren\u2019t included in the calculations.", "mime": "application/pdf"}, {"id": "cet-7000", "words": "2210", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-7000", "date": null, "keywords": "cogeneration; gas; optimization; steam; system; turbine", "summary": "Optimization of proposed cogeneration system The aim of energy system optimization is modifying the system design according to one or more defined objectives. C) 512 261.8 P2 (bar) 19.5 T7 (\u00b0C) Table 5: Comparison between cogeneration system before and after optimization Improvement% Cost of optimized CHP ($/y)", "mime": "application/pdf"}, {"id": "cet-7001", "words": "3170", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-7001", "date": null, "keywords": "content; liquor; process; samples; scaling; sodium; solids; wt%", "summary": "Black liquor samples (5.00 \u00b1 0.5 mg) were placed on a platinum pan. Black liquor samples (2.00 \u00b1 0.2 mg) were put into an aluminum sample holder and then the cell was sealed hermetically.", "mime": "application/pdf"}, {"id": "cet-7002", "words": "2878", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-7002", "date": null, "keywords": "energy; heat; mapping; process; steam; waste; zone", "summary": "For this opportunity, the detailed steam mapping diagram indicates that 3.5 MW of steam energy can be substituted by waste heat, giving an opportunity for economic benefit of 0.76 M $/y based on the operating cost estimates. In the present work, an alternative to the energy Composite Curves representation is proposed to complement the visualization of energy integration opportunities.", "mime": "application/pdf"}, {"id": "cet-7003", "words": "2402", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-7003", "date": null, "keywords": "curves; exchanger; heat; recovery; temperature", "summary": "In this paper we study the possibilities of a novel pinch-based approach for estimation of heat recovery possibilities (Ruohonen and Sivill, 2011) based on the use of advanced composite curves in combination with thermodynamic simulation. Calculation of heat recovery possibilities in two cases: a. The heat is taken to the streams that compose the Extreme Heat Load Curve b.", "mime": "application/pdf"}, {"id": "cet-7004", "words": "3141", "extension": ".pdf", "flesch": "58", "author": null, "title": "cet-7004", "date": null, "keywords": "analysis; heat; hlmpp; mill; paper; pinch; steam", "summary": "Figure 2: HLMPP GCC as dashed line and detailed pinch GCC as continuous line Table 4 lists important parameters from the two different methods, HLMPP and detailed pinch analysis, both evaluated for the same paper production. The intention of this study is to evaluate if the model can accurately estimate the data necessary for performing a pinch analysis for a Swedish thermo-mechanical pulp (TMP) and paper mill.", "mime": "application/pdf"}, {"id": "cet-7005", "words": "2794", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-7005", "date": null, "keywords": "cell; control; fuel; lpg; model; operating; power; reforming; system; temperature", "summary": "A medium scale pilot plant unit based on LPG reforming was presented by Recupero et al. (2005), and highlighted the effect of inlet composition and operating temperature on LPG conversion rates. Fuel minimization and prolonged battery life is considered important in hybrid applications (fuel cell and Li-Ion battery) that involve complex interactions along with a combination of slow and fast dynamics.", "mime": "application/pdf"}, {"id": "cet-7006", "words": "2196", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-7006", "date": null, "keywords": "design; energy; heat; process; resource; step", "summary": "3. Conclusion A conceptual holistic framework for minimum energy network design has been developed. Direct energy reuse or outsourcing may involve using thermal energy from within a facility (process heat, waste heat) or using an available external thermal source (e.g. solar heat or geothermal heat).", "mime": "application/pdf"}, {"id": "cet-7007", "words": "3616", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-7007", "date": null, "keywords": "boiler; cooling; energy; footprints; heat; kleme\u0161; systems; water", "summary": "Water footprint (WF) represents the total volume of direct and indirect fresh water used, consumed, and polluted. Gerbens-Leenes P. W., Hoekstra A. Y., Van der Meer Th. H., 2008, Water footprint of bioenergy and other primary energy carriers, Value of Water Research Report Series No. 29, UNESCO-IHE Institute for Water Education, Delft, the Netherlands.", "mime": "application/pdf"}, {"id": "cet-7008", "words": "3321", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-7008", "date": null, "keywords": "energy; heat; pump; steam", "summary": "Study basis and cases 2.1 Energy saving by heat pump (1) Concept of calculation for energy saving As can be seen in Figure 1, it is often found that the utility system in a large petrochemical plant has an integrated power generation facility. (2) Coefficient of performance Coefficient of performance (COP) can be used and understood as a measure of the energy efficiency of heat pump.", "mime": "application/pdf"}, {"id": "cet-7009", "words": "3370", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-7009", "date": null, "keywords": "cooling; exergy; process; refrigeration; system; temperature; utility; work", "summary": "This paper demonstrates how Heat Integration (HI) tools such as TSA and exergy analysis can be applied to target for shaft work and hot utility savings for processes and utility systems operating below ambient temperature. Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 29, 2012 A publication of The Italian Association of Chemical Engineering Online at: www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Hon Loong Lam, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161 Copyright \u00a9 2012, AIDIC Servizi S.r.l., ISBN 978-88-95608-20-4; ISSN 1974-9791 DOI: 10.3303/CET1229013 Please cite this article as: Hackl R. and Harvey S., (2012), Total site analysis (tsa) and exergy analysis for shaft work and associated steam and electricity savings in low temperature processes in industrial clusters, Chemical Engineering Transactions, 29, 73-78 73 Total Site Analysis (TSA) and Exergy Analysis for Shaft Work and Associated Steam and Electricity Savings in Low Temperature Processes in Industrial Clusters Roman Hackl*, Simon Harvey Chalmers University of Technology, Dpt.", "mime": "application/pdf"}, {"id": "cet-701", "words": "3651", "extension": ".pdf", "flesch": "46", "author": "Xiao, Wu; Zhang, Yi; Jiang, Xiaobin; Li, Xiangcun; Wu, Xuemei; He, Gaohong", "title": "Multi-objective Optimisation of MTBE Reactive Distillation Process Parameters based on NSGA-II ", "date": "2018", "keywords": "conversion; isobutene; mtbe; nsga; optimisation; parameters; population; process", "summary": "RD process parameters such as the reflux ratio, the number of trays etc. on maximizing the conversion of isobutene and minimizing TAC of MTBE RD process simultaneously. Optimisation of MTBE RD process parameters with NSGA-II 4.1 multi-objective optimisation problem In optimisation of MTBE RD process parameters, NSGA-II is used.", "mime": "application/pdf"}, {"id": "cet-7010", "words": "3090", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-7010", "date": null, "keywords": "air; burner; combustion; formation; fuel; gas; nox; nozzles", "summary": "Partial substitution of combustion air with high purity oxygen is beneficial for many reasons like increase of adiabatic temperature of flame, fuel savings; decrease of volume of produced emissions, higher product quality and better flame properties. Next increase of the amount of combustion air resulted in significant decrease of flame temperature peaks due to flame cooling by ballast air and consequently in NO reduction.", "mime": "application/pdf"}, {"id": "cet-7011", "words": "2171", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-7011", "date": null, "keywords": "biorefinery; exergy; heat; hen; process; water", "summary": "The use of process stream heat in the IS1 and IS2 HEN configurations avoided the use of external heating and cooling requirements, resulting in a more effective utilities consumption of the assessed process. Garc\u00eda A., Gonz\u00e1lez Alriols M., Llano-Ponte R., Labidi J., 2011, Energy and economic assessment of soda and organosolv biorefinery processes, Biomass Bioenerg. 35, 516-525.", "mime": "application/pdf"}, {"id": "cet-702", "words": "3471", "extension": ".pdf", "flesch": "57", "author": "Somplak, Radovan; Nevrly, Vlastimir; Smidova, Zlata; Pavlas, Martin", "title": "Multi-objective Waste Network Flow Identification Model Based on Economic and Environmental Aspects ", "date": "2018", "keywords": "data; model; node; treatment; waste", "summary": "However, the provided information about the composition and the possibilities of waste treatment is not sufficient. Longer distances are accepted in the preferred mode of waste treatment.", "mime": "application/pdf"}, {"id": "cet-703", "words": "2922", "extension": ".pdf", "flesch": "44", "author": "Soodsuansi, Chutima; Kulprathipunja, Santi; Ratanatawanate, Chalita; Rangsunvigit, Pramoch", "title": "Adsorption of Methane and Carbon Dioxide on Activated Carbon and ZIF-8 (Zeolitic Imidazolate Framework) ", "date": "2018", "keywords": "adsorbents; adsorption; carbon; dioxide; gas; methane; micropore; surface", "summary": "The open metal site should have low interaction towards carbon dioxide, which is a significant challenge in applying MOFs for high methane adsorption with low carbon dioxide adsorption. Djeridi, W., Ouederni, A., Wiersum, A.D., Llewellyn, P.L. and El Mir, L., 2013, High pressure methane adsorption on microporous carbon monoliths prepared by olives stones, Materials Letters, 99, 184-187.", "mime": "application/pdf"}, {"id": "cet-704", "words": "3163", "extension": ".pdf", "flesch": "51", "author": "Toth, Orsolya; Hollo, Andras; Hancsok, Jeno", "title": "Co-Processing of High-Sulphur Gas Oil and Waste with High Fatty Acid Content ", "date": "2018", "keywords": "acid; content; fatty; feedstocks; gas; oil; products; reactions; sulphur", "summary": "Results and discussion 3.1 Yield Based on the comparison of the yields of products form different feedstocks under the same conditions we found that with higher fatty acid fraction content in the feedstock the yield of the main products decreased (Figure 1). With higher fatty acid fraction content in the feedstock the share of DCOx reactions increased compared to the share of HDO reactions.", "mime": "application/pdf"}, {"id": "cet-705", "words": "3375", "extension": ".pdf", "flesch": "36", "author": "Sanabria-Cala, Javier A.; Conde-Rodriguez, Gerson R.; Laverde-Catano, Dionisio A.; Pena-Ballesteros, Dario Y.; Duran, Hugo A. Estupinan", "title": "Influence of Exposure Time on Morphological and Electrochemical Properties of Corrosion Products Formed by High Temperature Sulfidation of AISI/SAE-1020 Steel ", "date": "2018", "keywords": "aisi; corrosion; corrosion products; exposure; fes; products; sae-1020; sae-1020 steel; steel", "summary": "Figure 2: SEM-EDS micrographs of corrosion products formed on AISI/SAE-1020 steel in HCO at 350\u00b0C after exposure times of A) 90 h, B) 120 h, C) 150 h, D) 210 and E) 330 h. 1647 B) C) D) E) Figure 2 (continue): SEM-EDS micrographs of corrosion products formed on AISI/SAE-1020 steel in HCO at 350\u00b0C after exposure times of A) 90 h, B) 120 h, C) 150 h, D) 210 and E) 330 h. 1648 Prior to the electrochemical characterization of FeS corrosion products formed on the AISI/SAE-1020 steel surface, Open Circuit Potential measurements (OCP) were carried out for 1 hour to determine the anodic or cathodic tendency of the system, reaching a stable state. The morphology of FeS corrosion products formed on the AISI/SAE-1020 steel surface at temperature of 350 \u00b0C and exposure times of 90, 120, 150, 210 and 330 hours was studied by surface characterization technique SEM-EDS, as detailed in the micrographs of Figure 2.", "mime": "application/pdf"}, {"id": "cet-706", "words": "4065", "extension": ".pdf", "flesch": "36", "author": "Brink, Hendrik G.; Wessels, Charlotte E.; Chirwa, Evans M. N.", "title": "Pseudomonas Stutzeri NT-I: Optimal Conditions for Growth and Selenate Reduction ", "date": "2018", "keywords": "biomass; concentration; conditions; experiments; growth; reduction; selenate; selenium; stutzeri", "summary": "The decrease in growth rate at selenium concentrations above 5 mM is likely a result of the toxicity of selenium at elevated concentrations. Materials and methods The optimisation experiments were limited to 1 g/L \u2013 6 g/L glucose, temperature range 20 \u00b0C \u2013 45 \u00b0C, pH 6 \u2013 9, salinities 5 g/L \u2013 20 g/L NaCl, and background selenium concentrations of 0 \u2013 5 mM.", "mime": "application/pdf"}, {"id": "cet-707", "words": "3626", "extension": ".pdf", "flesch": "59", "author": "Ding, Yudong; Li, Xiaoqiang; Guo, Liheng; Liao, Qiang; Zhu, Xun", "title": "Synthesis of Colloidal Suspension Based on Porous Silica Nanospheres and Its CO2 Absorption ", "date": "2018", "keywords": "absorption; capacity; co2; dmee; pei; psns; rate; wt%", "summary": "The pressure in the absorption vessel decreased with CO2 absorption. Here apparent absorption rate is the average rate from beginning of CO2 absorption to the time when CO2 loading is up to 90 % saturation absorption amount according to the Damping-Film Theory 0.0 0.2 0.4 0.6 0.8 1.0 0 100 200 300 400 500 V o lu m e A b so rb ed \uff08 cm 3 /g \uff09 Relative pressure \uff08P/P0\uff09 PSNs PEI-PSNs 0 5 10 15 20 25 30 35 0.0 0.5 1.0 1.5 2.0 2.5 d V /d D \uff08 cm 3 /g /n m \uff09 Pore diameter\uff08nm\uff09 PSNs PEI-PSNs 2 4 6 8 10 0.00 0.01 0.02 0.03 40 80 120 160 200 0.000 0.005 0.010 0.015 0.020 0.025 0.030 C O 2 s o lu b il it y c o ef fi ci en t (m o l\u00b7 L -1 \u00b7 k p a) P\uff08kPa\uff09 DMEE/PEI-PSNs(10wt%) Pure DMEE (a) (b) (a) (b) 1660 (Cadours et al., 2012), the relationship between the partial pressure of the gas and the absorption time can be described as\uff1a \uf07b \uf07d utPPPP ee \uf03d\uf02d\uf02d \uff09\uff08\uff09\uff08", "mime": "application/pdf"}, {"id": "cet-708", "words": "3140", "extension": ".pdf", "flesch": "52", "author": "Al-asadi, Mohammed; Gombor, Linda; Miskolczi, Norbert", "title": "Production of Hydrogen Rich Products from Mixture of Polyolefin and PET over Different Modified ZSM-5 Catalysts ", "date": "2018", "keywords": "al ratio; catalysts; hydrogen; pyrolysis; ratio; waste", "summary": "Pyrolysis oil contains high content of aromatic compounds, which was caused by the structure of PET waste and isomerization effect of ZSM-5 catalyst. The goal of this work was the investigation of the pyrolysis of 50%/50% polyolefin and polyethylene terephthalate waste plastics at 700\u00b0C temperature in tubular furnace using different active metals supported by ZSM-5 catalyst, focusing on the effect of catalysts type and Si/Al ratio on the pyrolysis process.", "mime": "application/pdf"}, {"id": "cet-709", "words": "2701", "extension": ".pdf", "flesch": "40", "author": "Darmawan, Arif; Biddinika, Muhammad K.; Huda, Muhammad; Tokimatsu, Koji; Aziz, Muhammad", "title": "Toward Sustainable Agricultural: Integrated System of Rice Processing and Electricity Generation ", "date": "2018", "keywords": "drying; energy; process; rice; steam; system; torrefaction", "summary": "For each kg of rice grain produced, 0.28 kg of rice husk and 1.1 kg of rice straw are generated (Yusof et al., 2008). The synergetic integration of rice production and electricity generation using rice husk and rice straw is important to enhance sustainable energy supply.", "mime": "application/pdf"}, {"id": "cet-71", "words": "3274", "extension": ".pdf", "flesch": "54", "author": "Vasickaninova, A.; Bakosova, M.; Oravec, J.; Meszaros, A.", "title": "Neural Network Predictive Controller Design ", "date": "2017", "keywords": "control; controller; exchangers; heat; model; network; plant; predictive", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 61, 2017 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Petar S Varbanov, Rongxin Su, Hon Loong Lam, Xia Liu, Ji\u0159\u00ed J Kleme\u0161 Copyright \u00a9 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-51-8; ISSN 2283-9216 Neural Network Predictive Controller Design for Counter-Current Tubular Heat Exchangers in Series Anna Vasi\u010dkaninov\u00e1*, Monika Bako\u0161ov\u00e1, Juraj Oravec, Alajos M\u00e9sz\u00e1ros Slovak University of Technology in Bratislava, Faculty of Chemical and Food Technology, Institute of Information Engineering, Automation, and Mathematics, Radlinsk\u00e9ho 9, 812 37 Bratislava, Slovak Republic anna.vasickaninova@stuba.sk This paper aims at showing the application of neural network predictive control (NNPC) to counter-current heat exchangers (HEs) in series for water savings. Neural network predictive control (NNPC) of the HEs for water savings was studied by simulations.", "mime": "application/pdf"}, {"id": "cet-710", "words": "2943", "extension": ".pdf", "flesch": "52", "author": "Li, Bo; Wang, Yufei; Feng, Xiao; Jiang, Guiyuan", "title": "A New Targeting Approach for Large Scale Interplant Heat Integration ", "date": "2018", "keywords": "energy; heat; integration; match; number; plants; step; universe", "summary": "Direct Heat Integration using process streams and Indirect Heat Integration using intermediate fluid are both researched. Because Indirect Heat Integration requires twice heat transfer, the minimum temperature is doubled compared with Direct Heat Integration.", "mime": "application/pdf"}, {"id": "cet-711", "words": "3452", "extension": ".pdf", "flesch": "46", "author": "Gong, Jian; You, Fengqi", "title": "A Resilience Analysis Approach for Process Design, Integration and Optimization ", "date": "2018", "keywords": "events; framework; optimization; process; processes; resilience; solution; system", "summary": "A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Timothy G. Walmsley, Petar S. Varbanov, Rongxin Su, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2018, AIDIC Servizi S.r.l. ISBN 978-88-95608-67-9; ISSN 2283-9216 A Resilience Analysis Approach for Process Design, Integration and Optimization Jian Gong, Fengqi You* Cornell University, Ithaca, New York 14853, USA fengqi.you@cornell.edu Resilience in response to disruption events is critical to the economic performance of process systems, but this concept has received limited attention in the literature. However, resilience was not quantified explicitly as an intrinsic property of the system and there is no systematic framework for resilience optimization of process systems.", "mime": "application/pdf"}, {"id": "cet-712", "words": "4113", "extension": ".pdf", "flesch": "38", "author": "Davila, Izaskun; Gullon, Patricia; Labidi, Jalel; Budarin, Vitaliy", "title": "Assessment of the Influence of the Temperature in the Microwave-Assisted Alkaline Delignification of Vine Shoots ", "date": "2018", "keywords": "alkaline; alkaline delignification; delignification; lignin; microwave; shoots; solid; treatment; vine; vine shoots", "summary": "2.3 Microwave assisted delignification of pretreated vine shoots The alkali delignification was carried out in a CEM-Discover SP microwave by mixing the hydrothermally pretreated vine shoots with a solution of 3.1 w/w% NaOH in an LSR of 10 Kg/Kg (oven-dried basis), using 35 Vine shoots Autohydrolysis (non-isothermal regimen) This fact has driven the attention towards the production of bio-ethanol from unexploited lignocelullosic biomass, such as vine shoots for instance.", "mime": "application/pdf"}, {"id": "cet-713", "words": "3001", "extension": ".pdf", "flesch": "46", "author": "Chatrattanawet, Narissara; Kanjanasorn, Worameth; Authayanun, Suthida; Saebea, Dang; Patcharavorachot, Yaneeporn", "title": "Biomass Steam Gasification of Sugarcane Leftover for Green Diesel Production ", "date": "2018", "keywords": "biomass; gas; gasification; process; production; steam; sugarcane; syngas", "summary": "The sugarcane leftovers are selected as the feedstock for steam biomass gasification process and its properties such as proximate analysis and ultimate analysis are presented in Table 1. The use of steam as agent is the common alternative for biomass gasification process to produce the syngas rich in hydrogen (Detchusananard et al., 2017).", "mime": "application/pdf"}, {"id": "cet-714", "words": "3203", "extension": ".pdf", "flesch": "44", "author": "Garcia-Herrero, Isabel; Oliveira-Leao, Susana; Margallo, Maria; Laso, Jara; Bala, Alba; Fullana, Pere; Raugei, Marco; Irabien, Angel; Aldaco, Ruben", "title": "Life Cycle Energy Assessment of Pneumatic Waste Collection Static Systems: A Case Study of Energy Balance for Decision-Making Process ", "date": "2018", "keywords": "collection; cycle; door; energy; life; management; production; study; system; waste", "summary": "As shown, results indicate that replacing the prevailing system with pneumatic waste collection would increase primary energy demand and GWP. DOI: 10.3303/CET1870284 Please cite this article as: Garcia-Herrero I., Oliveira-Leao S., Margallo M., Laso J., Bala A., Fullana P., Raugei M., Irabien A., Aldaco R., 2018, Life cycle energy assessment of pneumatic waste collection static systems: a case study of energy balance for decision-making process , Chemical Engineering Transactions, 70, 1699-1704 DOI:10.3303/CET1870284 1699 One alternative to conventional MSW trucking collection is pneumatic transportation.", "mime": "application/pdf"}, {"id": "cet-715", "words": "3833", "extension": ".pdf", "flesch": "38", "author": "Gullon, Patricia; Eibes, Gemma; Davila, Izaskun; Moreira, Maria T.; Labidi, Jalel; Gullon, Beatriz", "title": "Manufacture of Nutraceutical Compounds from Chestnut Shells by Hydrothermal Processing ", "date": "2018", "keywords": "chestnut; compounds; content; hydrothermal; oligosaccharides; phenolic; shells", "summary": "The hemicellulose content is in the same range as those reported for other agro industrial by-products such as sunflower seed shells (Gull\u00f3n et al., 2009) or peanut shells (Rico et al., 2018) but it is lower than the one reported for rye straw (Gull\u00f3n et al., 2010).", "mime": "application/pdf"}, {"id": "cet-716", "words": "4320", "extension": ".pdf", "flesch": "67", "author": "Guo, Cen; You, Fengqi", "title": "Robust Optimization for Batch Process Scheduling Under Uncertainty Using Piecewise Linear Decision Rule ", "date": "2018", "keywords": "jnn; n z; process; scheduling; uncertainty; \uf0a2 \uf0a2\uf0a2; \uf0a2\uf0a2 \uf0a2; \uf0a2\uf0a2 \uf0a2\uf0a2; \uf0ce \uf0ce", "summary": "i n z \uf0a2 \uf0a2 \uf0a2 \uf0a2 \uf0a2\uf0a2 \uf0a2 \uf0a2 \uf0a2 \uf0a2\uf0a2\uf0a3 \uf022 \uf0ce \uf022 \uf0ce \uf022 \uf0ce \uf022 \uf0ceJ I N Z (25) , , , , , ,, 0 , , jnn jnn jnn jnn jnn jnn z i i n z \uf0a2 \uf0a2 \uf0a2 \uf0a2 \uf0a2 \uf0a2 \uf0a2 \uf0a2\uf0a2 \uf0a2 \uf0a2\uf0a2 \uf0a2 \uf0a2\uf0a2 \uf0a2 \uf0a2 \uf0a2\uf0a2 \uf0a2 \uf0a2\uf0a2 \uf0a2\uf0a2 \uf0a2 \uf0a2 \uf0a2\uf0a2\uf0b3 \uf022 \uf0ce \uf022 \uf0ce \uf022 \uf0ce \uf022 \uf0ceJ I N Z (26) where \ud835\udc40, \ud835\udc42, \ud835\udc43, \ud835\udc44, and \ud835\udc45 are dual variables and \ud835\udc46 is a support variable as '' ' ' ' ' '' ' ''' ''", "mime": "application/pdf"}, {"id": "cet-717", "words": "2963", "extension": ".pdf", "flesch": "41", "author": "Tian, Xueyu; You, Fengqi", "title": "Superstructure Optimization of Geothermal Binary Combined Cooling, Heating and Power System Using Life Cycle Optimization ", "date": "2018", "keywords": "cooling; cycle; energy; geofluid; geothermal; heating; life; optimization; power", "summary": "The energy carrier in geothermal energy systems, such as geofluid, generally has a much lower temperature than the flue gas generated by fossil fuel combustion, allowing low-temperature heat demand to be met with much higher efficiency. However, there is no systematic study on LCO of geothermal energy systems.", "mime": "application/pdf"}, {"id": "cet-718", "words": "3476", "extension": ".pdf", "flesch": "44", "author": "Gao, Jiyao; You, Fengqi", "title": "Sustainable Design and Operations of Shale Gas Supply Chains Using Integrated Hybrid Life Cycle Optimization Models ", "date": "2018", "keywords": "cycle; gas; life; plants; process; processing; shale; shale gas; supply; systems", "summary": "According to the optimization results, the lowest levelized cost of electricity generated from shale gas is \u00a351.8 /MWh, and the optimal life cycle GHG emissions are 473.5 kg CO2-eq/MWh. According to the most recent report by the U.S. Energy Information Administration (EIA), there are 35,782 Trillion cubic feet (Tcf) risked shale gas in-place for 41 countries, of which 7,299 Tcf shale gas is considered technically recoverable (EIA, 2018).", "mime": "application/pdf"}, {"id": "cet-719", "words": "3168", "extension": ".pdf", "flesch": "43", "author": "Gong, Jian; You, Fengqi", "title": "Sustainable Design and Synthesis of Shale Gas Processing and Chemical Manufacturing Processes ", "date": "2018", "keywords": "chemical; engineering; gas; optimization; process; processing; shale; shale gas; superstructure", "summary": "Three objective functions are maximizing the net present value per GJ of raw shale gas, minimizing the global warming potential per GJ of raw shale gas, and minimizing the water footprint per GJ of raw shale gas, respectively. We propose a multiobjective mixed-integer nonlinear programming model to simultaneously maximize the net present value (NPV) per GJ of raw shale gas, minimize the global warming potential (GWP) per GJ of raw shale gas, and minimize the water footprint per GJ of raw shale gas.", "mime": "application/pdf"}, {"id": "cet-72", "words": "2804", "extension": ".pdf", "flesch": "38", "author": "Guo, Z.; Guo, S.; Liu, P.; Li, Z.", "title": "Operation Data Based Modelling and Performance Monitoring of Steam Turbine Regenerative System under Full Working Conditions ", "date": "2017", "keywords": "model; monitoring; performance; power; steam; system; turbine", "summary": "Saari J., 2014, Comparison of power plant steam condenser heat transfer models for on-line condition monitoring. System description and dominant factor model This paper focuses on the steam turbine regenerative system, which usually includes several parts: heater, turbine stage and pump.", "mime": "application/pdf"}, {"id": "cet-720", "words": "3878", "extension": ".pdf", "flesch": "57", "author": "Pinto, Filomena; Paradela, Filipe; Costa, Paula; Andre, Rui; Rodrigues, Tiago; Snape, Colin; Herrador, Jose M. Hidalgo; Fratczak, Jakub", "title": "The Role of Solvent and Catalysts on Co-Liquefaction of Coal and Waste ", "date": "2018", "keywords": "coal; figure; hydrogen; liquefaction; liquid; solvent; tetralin; yields", "summary": "The use of plastics, namely polyethylene (PE) favoured coal liquefaction, as PE macromolecules are easier to break down and to form smaller liquid molecules than coal. There is much information about coal liquefaction.", "mime": "application/pdf"}, {"id": "cet-721", "words": "3205", "extension": ".pdf", "flesch": "54", "author": "Csontos, Balazs; Halasz, Laszlo; Heckl, Istvan", "title": "Event-driven Simulation of Liquid Transportation Through Pipeline Networks for Oil Companies ", "date": "2018", "keywords": "oil; pipeline; product; schedule; simulation; system; tank; time; transportation", "summary": "Helps the design of tank schedule, product pipeline schedule, blending order schedule, and product allocation. Product pipeline schedule can be described by the three main operations: upload, download, and transport.", "mime": "application/pdf"}, {"id": "cet-7213", "words": "2645", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-7213", "date": null, "keywords": "adsorption; batzias; cation; chem; exchange; model; order; removal", "summary": "The thermodynamic equilibrium of this process has been studied through adsorption isotherms and the kinetics has been examined by applying several models of various order under batch conditions while for the continuous flow regime the Bohart Adams model and its relevant modifications were used. Its functionality has been proved by using a case example concerning the adsorption of Cr 3 + on and cation exchange with Amberlite IR 120-H. The thermodynamic equilibrium of this process has been studied through adsorption isotherms and the kinetics has been examined by applying several models of various order under batch conditions while for the continuous flow regime the Bohart Adams model and its relevant modifications were used.", "mime": "application/pdf"}, {"id": "cet-7214", "words": "3108", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-7214", "date": null, "keywords": "adsorption; biomass; fe(iii; ions; metal; ni(ii; pb(ii", "summary": "3.3 Effect of pH on metal adsorption The pH of solution is an important parameter affecting metal adsorption by algal biomass. Langmuir adsorption isotherm is a widespread-used model for describing metal adsorption to a sorbent.", "mime": "application/pdf"}, {"id": "cet-7215", "words": "1976", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-7215", "date": null, "keywords": "adsorption; clinoptilolite; copper; freundlich; removal; solution", "summary": "A number of technologies for the removal of heavy metal ions from aqueous solutions have been developed over the years. A number of technologies for the removal of heavy metal ions from aqueous solutions have been developed over the years, which was recently confirmed (shaker,2005).The most important of these techniques include chemical precipitation, filtration and reverse osmosis.", "mime": "application/pdf"}, {"id": "cet-7216", "words": "2862", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-7216", "date": null, "keywords": "ozonation; removal; time; xylene", "summary": "Removal efficiencies of chlorinated pesticides were in the range from 70.2 to 90.7 % after 60 minutes of ozonation. Removal efficiencies of about 90 % were observed for all investigated BTX compounds after 40 minutes of ozonation..", "mime": "application/pdf"}, {"id": "cet-7217", "words": "3082", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-7217", "date": null, "keywords": "anaerobic; digester; impeller; mixing; power; sludge; solutions; xgkt", "summary": "Experimental Methods 2.1 Digested Sludge and Simulant Rheology Measurements Digested sludge was commonly used in digester mixing studies reported in the literature. Hence, sludge rheology needs to be considered in the design of digester mixing system to achieve optimum mixing.", "mime": "application/pdf"}, {"id": "cet-7218", "words": "3015", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-7218", "date": null, "keywords": "fouling; heat; phe; resistance; shear; stress; wall; water", "summary": "In that case, when water asymptotic fouling in one heat exchanger can be determined, we can calculate the coefficient B * in Eq. 4 and use this value to determine cooling water fouling for PHEs calculated for this enterprise on all other cooling positions. Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 29, 2012 A publication of The Italian Association of Chemical Engineering Online at: www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Hon Loong Lam, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161 Copyright \u00a9 2012, AIDIC Servizi S.r.l., ISBN 978-88-95608-20-4; ISSN 1974-9791 DOI: 10.3303/CET1229222 Please cite this article as: Arsenyeva O. P., Tovazhnyansky L. L., Kapustenko P. O. and Demirskyy O. V., (2012), Accounting for thermal resistance of cooling water fouling in plate heat exchangers, Chemical Engineering Transactions, 29, 1327-1332 1327 Accounting for Thermal Resistance of Cooling Water Fouling in Plate Heat Exchangers Olga P. Arsenyeva*a, Leonid L. Tovazhnyanskyb, Petro O. Kapustenkob, Oleksiy V. Demirskyya a AO \u201cSodrugestvo\u2013T\u201d, Krasnoznamenniy per. 2, k. 19, 61002 Kharkiv, Ukraine; b National Technical University \u201cKhPI\u201d, 21 Frunze Str., 61002 Kharkiv, Ukraine;", "mime": "application/pdf"}, {"id": "cet-7219", "words": "3392", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-7219", "date": null, "keywords": "components; concentration; method; reaction; time", "summary": "We introduce the following denotations for components concentration B and E: ),( ji j i txBB \uf03d , ),( ji j i txEE \uf03d respectively. We used also both the sweep separate method for definition of profiles of components concentration", "mime": "application/pdf"}, {"id": "cet-722", "words": "4055", "extension": ".pdf", "flesch": "52", "author": "Perminov, Valeriy A.", "title": "Mathematical Modelling of Wildland Fires Initiation and Spread Using a Coupled Atmosphere-Forest Fire Setting ", "date": "2018", "keywords": "crown; fire; forest; r r; \uf0b6 \uf03d; \uf0b6 \uf0b6", "summary": "The aim of the present paper is to study the behaviour of crown forest fires propagating through crown canopy and to study the mutual influence of crown forest fires and boundary layer of atmosphere using numerical simulation with a physics-based model and improvement of knowledge on the fundamental physical mechanisms that control forest fire spread. However, the investigation of crown fires initiation has been limited mainly to cases without taking into account the interaction of crown forest fires with boundary layer of atmosphere.", "mime": "application/pdf"}, {"id": "cet-7220", "words": "1869", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-7220", "date": null, "keywords": "flow; inlet; model; tube", "summary": "Comparison of 2D flow rates and volume integrals of vorticity magnitude over individual U-tube inlet parts is in Figures 6 and 7. Vorticity of flow in the critical areas (near inlet tube sheet and in inlet regions of U-tubes) was evaluated directly in FLUENT using volume integrals of vorticity magnitude to ensure that significant stagnation zones are not present there.", "mime": "application/pdf"}, {"id": "cet-7221", "words": "3427", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-7221", "date": null, "keywords": "european; gases; incineration; msw; n.a; n.a n.a; portugal; spain; waste", "summary": "2E-3 <3E-2 <7.2E-3 1.4E-2 NH3 6.1E-3 2.3E-3 N.A N.A N.A N.A N.A N.A N.A N.A TOC 1.59 3.63 N.A N.A N.A N.A N.A N.A N.A N.A To assess the environmental advantages and disadvantages as well as the potential environmental impacts of waste incineration a life cycle perspective is required.", "mime": "application/pdf"}, {"id": "cet-7222", "words": "2941", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-7222", "date": null, "keywords": "energy; film; heat; peek; polymer; surface; temperature; treatments; wetting", "summary": "The resistance to corrosion and the adhesion properties related to scaling deposits are further advantages of polymer surfaces. Christmann et al. (2010) applied a polyetheretherketone (PEEK) film as heat transfer surface and reached mean overall heat transfer coefficients up to 1570 \u00b1 181 W\u00b7m 2 \u00b7K -1 dependent on the operating conditions.", "mime": "application/pdf"}, {"id": "cet-7223", "words": "2741", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-7223", "date": null, "keywords": "exchangers; figure; heat; interpolation; knowledge; psc; reasoning; set", "summary": "Medical applications of FPHE are the only area where such heat exchangers have a long tradition and therefore extensive experience, blood cooling. Large PSC fuzzy models At present, most of the techniques employed for the analysis of complex problems possess analytical or statistical natures.", "mime": "application/pdf"}, {"id": "cet-7224", "words": "2837", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-7224", "date": null, "keywords": "cdm; control; controller; design; exchanger; heat; method; time", "summary": "Format And Type Fonts CCHHEEMMIICCAALL EENNGGIINNEEEERRIINNGG TTRRAANNSSAACCTTIIOONNSS VOL. 29, 2012 A publication of The Italian Association of Chemical Engineering Online at: www.aidic.it/cet Guest Editors: Petar Sabev Varbanov, Hon Loong Lam, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161 Copyright \u00a9 2012, AIDIC Servizi S.r.l., ISBN 978-88-95608-20-4; ISSN 1974-9791 DOI: 10.3303/CET1229228 Please cite this article as: Vasi\u010dkaninov\u00e1 A. and Bako\u0161ov\u00e1 M., (2012), Robust control of heat exchangers, Chemical Engineering Transactions, 29, 1363-1368 1363 Robust Control of Heat Exchangers Anna Vasi\u010dkaninov\u00e1*, Monika Bako\u0161ov\u00e1 Institute of Information Engineering, Automation and Mathematics, Faculty of Chemical and Food Technology Slovak University of Technology in Bratislava Radlinsk\u00e9ho 9, 812 37 Bratislava, Slovakia anna.vasickaninova@stuba.sk This work deals with the design and application of a neuro-fuzzy controller to a heat exchanger and with possibilities to use the coefficient diagram method for heat exchanger control. Figure 2: Standard block diagram of CDM control system The CDM is a technique to arrange the poles of a closed loop transfer function, in order to get wanted response in the time domain.", "mime": "application/pdf"}, {"id": "cet-7225", "words": "2398", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-7225", "date": null, "keywords": "design; heat; process; second; sigma; stream", "summary": "b) Control charts second design 1374 for the second design as follow: (a) Control charts first design.", "mime": "application/pdf"}, {"id": "cet-723", "words": "3738", "extension": ".pdf", "flesch": "37", "author": "Ziegler-Rodriguez, Kurt; Margallo, Maria; Aldaco, Ruben; Irabien, Angel; Vazquez-Rowe, Ian; Kahhat, Ramzy", "title": "Environmental Performance of Peruvian Waste Management Systems under a Life Cycle Approach ", "date": "2018", "keywords": "assessment; cycle; environmental; landfills; life; management; model; msw; peru; waste; waste management", "summary": "For waste management, the trend is that while developed countries seek more integrated and sustainable waste management systems (Laurent et al., 2014), emerging nations are still basically fighting to switch from the disposal of residues in open dumpsites to disposing of them in controlled landfills (Guerrero et al., 2013). El Treinta a) b) 1754 Table 1: Review of LCA studies on waste management using EASETECH model.", "mime": "application/pdf"}, {"id": "cet-724", "words": "3401", "extension": ".pdf", "flesch": "52", "author": "Mamonova, Natasha V.; Koltsova, Eleonora M.; Skichko, Evgenia A.; Shaneva, Anna S.; Popova, Nelly A.", "title": "Mathematical Modelling of the Process of Spark Plasma Sintering of a Ceramic Material Composite Al2O3 - ZrO2 - Y2O3, Modified by Carbon Nanotubes ", "date": "2018", "keywords": "carbon; cnt; composite; nanotubes; sintering; temperature", "summary": "Experimental research 2.1 Experimental research in the field of CNT synthesis by catalytic pyrolysis of a methane-hydrogen mixture Table 1 shows the composition of the catalyst components for the production of carbon nanotubes (CNTs) by catalytic pyrolysis of a methane-hydrogen mixture. A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Timothy G. Walmsley, Petar S. Varbanov, Rongxin Su, Ji\u0159\u00ed J. Kleme\u0161 Copyright \u00a9 2018, AIDIC Servizi S.r.l. ISBN 978-88-95608-67-9; ISSN 2283-9216 Mathematical Modelling of the Process of Spark Plasma Sintering of a Ceramic Material Composite Al2O3 - ZrO2 - Y2O3, Modified by Carbon Nanotubes Natasha V. Mamonova*, Eleonora Koltsova, Evgenia A. Skichko, Anna S. Shaneva, Nelly A. Popova D. Mendeleyev University of Chemical Technology of Russia, Miusskaya sq. 9, 125047 Moscow, Russia kolts@muctr.ru Experimental studies have been carried out in the field of obtaining carbon nanotubes (CNT) and", "mime": "application/pdf"}, {"id": "cet-725", "words": "2694", "extension": ".pdf", "flesch": "50", "author": "Lebedev, Igor V.; Khudeev, Illarion I.; Kolnoochenko, Andrey V.; Tyrtyshnikov, Andrey Y.; Ivanov, Svyatoslav I.; Menshutina, Natalia V.", "title": "Silica-Resorcinol-Formaldehyde Aerogels Nanostructure Modelling ", "date": "2018", "keywords": "aerogels; cluster; model; rlca; silica; size; structure", "summary": "Computational model of aerogels structure enables to calculate various properties such as thermal conductivity and mechanical strength, without using expensive experiments. Modeling of the structure formation process allows obtaining model structures similar to real ones.", "mime": "application/pdf"}, {"id": "cet-726", "words": "4236", "extension": ".pdf", "flesch": "39", "author": "Batyrgazieva, Diana R.; Khudeev, Illarion I.; Guseva, Elena V.; Menshutina, Natalia V.; Dorokhov, Igor N.", "title": "The Study of Microbiological Processes on Microfluidic Chips and Modeling ", "date": "2018", "keywords": "boundary; channel; chemical; chip; devices; droplet; drops; flow; methods; microfluidics; modelling; number", "summary": "2.1 Features of droplet microfluidics The implementation of analytical operations (sample sampling, manipulation and measurement of the informative signal) by droplet microfluidics methods allows to significantly accelerate the analysis of the samples. This range of nonlinear effects of almost five orders of magnitude, can play a decisive role, which mainly explains the difficulties encountered by researchers in creating droplet microfluidics devices.", "mime": "application/pdf"}, {"id": "cet-727", "words": "2718", "extension": ".pdf", "flesch": "42", "author": "Chirwa, Evans M. N.; Lutsinge, Tshilidzi B.", "title": "Biological Degradation of Pyrene and Fluoranthene in Porous Media and Attached Growth Systems by Biosurfactant Producing Bacteria ", "date": "2018", "keywords": "biosurfactant; compounds; creosote; degradation; pahs; pyrene; ring; soil", "summary": "The removal rate in each compound is limited by the dissolution index of each compound with high ring number compounds being typically less soluble and therefore more difficult to remove. In both cases, increased biosurfactant dose improved degradation rate up to the point where the PAH concentration became inhibitory to biomass growth and PAH degradation.", "mime": "application/pdf"}, {"id": "cet-728", "words": "3411", "extension": ".pdf", "flesch": "50", "author": "Eles, Andras; Halasz, Laszlo; Heckl, Istvan; Cabezas, Heriberto", "title": "Energy Consumption Optimization of a Manufacturing Plant by the Application of the P-Graph Framework ", "date": "2018", "keywords": "cost; energy; graph; huf; model; solution; synthesis", "summary": "Therefore, it is crucial to develop structures of manufacturing processes which reduce energy consumption, and meet energy demands with a mix of available options, all of which remaining economically feasible. Table 2: Available energy sources in the region.", "mime": "application/pdf"}, {"id": "cet-73", "words": "3218", "extension": ".pdf", "flesch": "64", "author": "Zhuang, Y.; Liu, L.; Du, J.", "title": "Direct Work Exchange Networks Synthesis of Isothermal Process Based on Superstructure Method ", "date": "2017", "keywords": "j j; j k; kpa; streams; work", "summary": "Ultimately, a case study is conducted to demonstrate the synthesis of direct work exchange networks based on superstructure method can offer vitally considerable savings in TAC. Conclusions The paper presents a mixed-integer nonlinear programming (MINLP) model targeting minimized total annual cost to synthesize direct work exchange networks of isothermal process.", "mime": "application/pdf"}, {"id": "cet-7318", "words": "3123", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-7318", "date": null, "keywords": "acid; archaea; benzoic; dead; medium; sea; strain", "summary": "Gentisic acid has been pointed out as a metabolic intermediate in aromatic acid degradation by halophilic archaea, and gentisate 1,2-dioxygenase activity has been detected in at least two haloarchaea genera in a substrate-dependent manner (Fairley et al., 2006). In a previous paper (Cuadros-Orellana et al., 2006) we reported on the isolation and properties of forty four extremely haloarchaea able to grow aerobically on aromatic acids as sole carbon and energy sources.", "mime": "application/pdf"}, {"id": "cet-7319", "words": "3828", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-7319", "date": null, "keywords": "alcohol; biodiesel; mass; oil; ratio; reaction; standard; wt%", "summary": "The values obtained experimentally for the corn oil density and iodine number are within the expected ranges of the NP-946:1981 standard for corn oil (915-924 kg/m3 and 103-128 g/100 g oil, respectively). Also the acid value obtained experimentally for corn oil is below the maximum limit of this standard (0.60 mg KOH/g).", "mime": "application/pdf"}, {"id": "cet-7320", "words": "2417", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-7320", "date": null, "keywords": "dme; energy; eur; gas; methanol; production", "summary": "2.2 Replacing the methanol production within indirect DME production This paper presents the replacing of pure methanol within DME production, and natural gas with biogas. 2.3 Economical analysis for replacing methanol production within indirect DME production This economical analysis included modification of the existing process units and the purchase of a new DME reactor (500,000 EUR/y), modification of six existing the heat exchangers during the purification section (6 \ufffd 20,000 = 120,000 EUR/y), and the modifications of two columns (2 \ufffd 40,000 = 80,000 EUR/y).", "mime": "application/pdf"}, {"id": "cet-7321", "words": "2948", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-7321", "date": null, "keywords": "activity; degradation; enzyme; hrt; laccase; membrane; oxygen; reactor; removal", "summary": "Accordingly, the effects of laccase activity (500-1,000 U/L), hydraulic residence time (1-4 h) and oxygen frequency supply (2-8 pulses of oxygen each HRT) were investigated. Samples were withdrawn during the treatment time (8 h) to determine the concentration of the estrogens in the effluent and to measure laccase activity.", "mime": "application/pdf"}, {"id": "cet-7322", "words": "1947", "extension": ".pdf", "flesch": "30", "author": null, "title": "cet-7322", "date": null, "keywords": "alcanivorax; gac; oil; salinity; slops; treatment", "summary": "Recently many marine hydrocarbonoclastic bacteria have been isolated and their degradation potential has been investigated (Yakimov et al., 2004). Significantly, Alcanivorax was found in low number in unpolluted waters, but in high abundances in oil-polluted waters and coastlines, where it may comprise 80-90% of the oil-degrading microbial community (Kasai et al., 2002).", "mime": "application/pdf"}, {"id": "cet-7323", "words": "2566", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-7323", "date": null, "keywords": "browning; eggplant; food; juice; onion; paste; ppo; products", "summary": "In previous works it has been shown that heated onion extracts were more effective in prevention of pear and banana browning than fresh onion extracts (Kim et al., 2005; Lee, 2007). Its fruits are largely consumed as fresh product and, more recently, as minimally processed vegetable (MPV), a rising commercial area in the fresh-cut industry.", "mime": "application/pdf"}, {"id": "cet-7324", "words": "3120", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-7324", "date": null, "keywords": "acid; activity; ascorbic; benzoic; browning; citric; concentration; food; ppo", "summary": "These positive effects were also translated in terms of browning index: ferulic acid (-39 %), glutamic acid (-25 %), citric acid (-19 %), ascorbic acid (-16 %) and benzoic acid (-13 %). Among these, the most widespread are organic acids and ascorbic acid.", "mime": "application/pdf"}, {"id": "cet-7325", "words": "1778", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-7325", "date": null, "keywords": "anthracene; biodegradation; isolates; phenanthrene; pyrene", "summary": "Selected bacterial isolates were grown in mineral medium containing polycyclic aromatic hydrocarbons (phenanthrene, anthracene, pyrene) at concentration 100 mg L\u20131. Biodegradation yield of selected PAH, quantified by gas chromatography, revealed high phenanthrene degradation yield by all six bacterial species (i.e. up to 98%), while maximum 48% and 78% degradation was obtained for anthracene and pyrene, respectively.", "mime": "application/pdf"}, {"id": "cet-7326", "words": "3618", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-7326", "date": null, "keywords": "$)*>/)*)$ \ufffd; biosurfactant; mgso4 \ufffd; soil; www.aidic.it/cet \ufffd; \ufffd $)*>/)*)$; \ufffd 7h2o; \ufffd application; \ufffd \ufffd", "summary": "untitled CHEMICAL ENGINEERING TRANSACTIONS VOL. 27, 2012 A publication of The Italian Association of Chemical Engineering Online at: www.aidic.it/cet \ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd!\ufffd#$\ufffd\ufffd\ufffd%&%\ufffd\ufffd'\ufffd\ufffd\ufffd \ufffd \ufffd'(\ufffd(\ufffd(\ufffd\ufffd \ufffd\ufffd\ufffd\ufffd\ufffd)*+/++/)3<#+/$+/$=\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd$)*>/)*)$\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd\ufffd Application of the Biosurfactant produced by Candida lipolytica in the Remediation of Heavy Metals Raquel D. Rufino, Juliana M. Luna, Galba M. Campos-Takaki, S\u00edlvio R.M. Ferreira; Leonie A. Sarubbo* Centre of Science and Technology, Catholic University of Pernambuco, Rua do Pr\u00edncipe, n. 526, Boa Vista, Cep: 50050-900, Recife-Pernambuco, Brazil leonie@unicap.br Soil that is accidentally contaminated with petroleum hydrocarbons can be remediated by physical, chemical, or biological methods. Hong K.J., Tokunaga S., Kajiuchi T., 2002, Evaluation of remediation process with plant-derived biosurfactant for recovery of heavy metals from contaminated soils, Chemosphere, 49, 379-387.", "mime": "application/pdf"}, {"id": "cet-7327", "words": "2711", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-7327", "date": null, "keywords": "biosurfactant; oil; sphaerica; surface; tension", "summary": "Studies on reduction of surface tension by the cell-free-broth containing the biosurfactant showed that it was stable over a wide pH range, and retained practically 100% of the activity against motor oil (Figure2B and Figure 3B). 2.8 Application of the biosurfactant in motor oil removal from contaminated sand Biosurfactant suitability for enhanced oil recovery was carried through using 60.0 g of beach sand impregnated with 5.0 mL of motor oil.", "mime": "application/pdf"}, {"id": "cet-7328", "words": "2189", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-7328", "date": null, "keywords": "biomass; biosorption; factors; lead; metal", "summary": "Influence of the factors studied in metal biosorption. The effect of dosage is relatively significant in cadmium biosorption, as can be seen in Table 3.", "mime": "application/pdf"}, {"id": "cet-7329", "words": "3242", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-7329", "date": null, "keywords": "batch; fed; glucose; growth; h-1; rate; \u2212 \ufffd; \ufffd \ufffd", "summary": "+ 2] \ufffd \u2219 \ufffd\ufffd \ufffd\ufffd \ufffd \u2219 \ufffd\ufffd \ufffd\ufffd {\ufffd \u2219 exp[\u2212&(\ufffd \u2212 \ufffd')]} \u2219 \ufffd\ufffd \ufffd\ufffd \u2200 t 0\u2264t<t1 \ufffd \u2265 \ufffd' Model parameter 6 \ufffd, \ufffd' , %\ufffd , \ufffd( , \ufffd\ufffd \ufffd\u2044 , \ufffd\ufffd \ufffd\ufffd 7 (Tab.1) values were obtained setting up ad hoc experiments. This latter is represented by the product between specific growth rate ( \ufffd) and product yield coefficient on biomass (\ufffd\ufffd \ufffd\ufffd ).", "mime": "application/pdf"}, {"id": "cet-7330", "words": "2723", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-7330", "date": null, "keywords": "alginate; design; osa; penicillin; percentage; retention; starch", "summary": "The data indicates that high retention percentage of penicillin G (95.4 %) values was obtained when OSA starch concentration and gelation time were lower. Figure 2a also depicts that the increase in alginate concentration showed positive effects on penicillin G retention.", "mime": "application/pdf"}, {"id": "cet-7331", "words": "3250", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-7331", "date": null, "keywords": "abe; acetobutylicum; butanol; caco3; concentration; fermentation; medium; production; sugar; xylose", "summary": "Qureshi N., Blaschek H.P., 2000, Economics of butanol fermentation using hyper-butanol producing Clostridium beijerinckii BA101, Trans IChemE, 78(Part C), 139\u2013144. Fermentation substrate is an important factor influencing the cost of butanol production (Qureshi and Blaschek, 2000; Kumar and Gayen, 2011).", "mime": "application/pdf"}, {"id": "cet-74", "words": "3947", "extension": ".pdf", "flesch": "59", "author": "Li, Z.; Majozi, T.", "title": "Optimal Design of Batch Water Network with a Flexible Scheduling Framework ", "date": "2017", "keywords": "batch; consumption; freshwater; network; process; water", "summary": "Procedures of design for flexible batch water network The design procedure for batch water network is shown in Figure 1. The results of these two examples demonstrate that the proposed method is a simple, effective approach for the design of batch water network with a flexible scheduling framework.", "mime": "application/pdf"}, {"id": "cet-75", "words": "3572", "extension": ".pdf", "flesch": "60", "author": "Gong, J.; You, F.", "title": "Handling Uncertain Feedstock Compositions in Shale Gas Processing System Designs with Simulation-based Robust Equipment Capacities ", "date": "2017", "keywords": "compositions; design; gas; ngls; process; processing; recovery; shale", "summary": "As the shale gas production rate from a shale well declines over time, the mixture composition of raw shale gas gathered from multiple shale wells can be uncertain. Shale gas processing plants remove valuable natural gas liquids (NGLs) and undesired components from raw shale gas to meet product specifications in downstream distribution networks (He and You, 2014).", "mime": "application/pdf"}, {"id": "cet-7536", "words": "2604", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-7536", "date": null, "keywords": "ammonia; conversion; membrane; operating; period; substrate", "summary": "Conclusions A system used for wastewater treatment was optimized using a dual-objective function \u2013 global conversion of ammonia plus ammonium nitrogen and the weighted productivity. This change forces the system to work at high conversions for both substrates.", "mime": "application/pdf"}, {"id": "cet-7537", "words": "2335", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-7537", "date": null, "keywords": "acid; batch; product; purity; reflux; time", "summary": "Recently, Edreder et al. (2010) considered the performance of batch reactive distillation in terms of minimum batch time with the hydrolysis reaction of methyl lactate and water (eqimolar feed composition) to produce high purity lactic acid (0.99 mole fraction). Therefore, an optimal reflux ratio policy will be chosen so that a given amount of lactic acid product with a given purity can be achieved in minimum time.", "mime": "application/pdf"}, {"id": "cet-7538", "words": "2604", "extension": ".pdf", "flesch": "62", "author": null, "title": "cet-7538", "date": null, "keywords": "flow; pinch; plant; quality; resource", "summary": "The LCCs, for the above overall pinch region, are already separated by the concentration axis and hence, inter-plant cross flow is not required. Therefore, 32.23 t/h of cross flow is required for achieving the minimum resource requirement.", "mime": "application/pdf"}, {"id": "cet-7543", "words": "2389", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-7543", "date": null, "keywords": "crystallisation; growth; phosphate; rate; solubility; struvite; supersaturation", "summary": "Previous studies have shown an influence of pH, mixing energy, and solution type on struvite growth rate (Koralewska et al., 2009; Nelson et al., 2003; Kofina & Koutsoukos, 2005; Ohlinger et al., 1999; Bouropoulos and Koutsoukos, 2000). Rapid crystallisation kinetics were observed in the solution, with growth rates over 20 \u03bcm/min at pH 8.5.", "mime": "application/pdf"}, {"id": "cet-76", "words": "3255", "extension": ".pdf", "flesch": "52", "author": "Gao, J.; You, F.", "title": "Design a Sustainable Supply Chain under Uncertainty using Life Cycle Optimisation and Stochastic Programming ", "date": "2017", "keywords": "algorithm; biofuels; chain; cost; design; geg; point; supply", "summary": "Problem statement To illustrate the application of the proposed modelling framework and tailored solution algorithm, a county-level case study on hydrocarbon biofuel supply chains in Illinois is considered. Optimal biofuel supply chain design in different solutions: (a) Point A, (b) Point B, (c) Point C The Pareto-curve shows that the most sustainable solution point A has the lowest GHG emission per GEG biofuels of 10.22 kg CO2-eq/GEG, and it has the highest cost per GEG biofuels of 4.21 $/GEG.", "mime": "application/pdf"}, {"id": "cet-77", "words": "4103", "extension": ".pdf", "flesch": "64", "author": "Gao, J.; You, F.", "title": "Incorporating Game Theory in the Life Cycle Optimization of Decentralized Supply Chains ", "date": "2017", "keywords": "c k; gas; k k; k t; shale; t c; t t; \uf0ce \uf0ce", "summary": "i p i p c k t i p P c C k K t T TE TE TE TE TE TE esd NN esp SP efw FW ewt WW epc STP est lsp STP \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf03d \uf02b \uf02b \uf02b \uf02b \uf03d \uf0d7 \uf02b \uf0d7 \uf02b \uf0d7 \uf02b \uf0d7 \uf02b \uf0d7 \uf02b \uf0d7 \uf0d7 \uf0e5\uf0e5 \uf0e5\uf0e5 TNL TNLpng TNGvp STP dr dr dr vpx PC STP dr \uf06a\uf06a \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf0ce \uf03d \uf02d \uf02d \uf0e9 \uf0f9\uf0d7 \uf02d \uf0d7 \uf02b\uf0d7 \uf02d \uf0d7\uf0d7 \uf0eb \uf0fb\uf03d \uf02b \uf02b \uf02b \uf02b \uf02b \uf0d7 \uf02d \uf02b \uf02b \uf0e5\uf0e5\uf0e5\uf0e5\uf0e5 \uf0e5 \uf0e5\uf0e5 \uf028 \uf029 \uf028", "mime": "application/pdf"}, {"id": "cet-78", "words": "4327", "extension": ".pdf", "flesch": "58", "author": "Garcia, D.J.; You, F.", "title": "Managing Land Use Change Greenhouse Gas Emissions of Bioethanol Production ", "date": "2017", "keywords": "biofuels; biomass; cycle; emissions; ethanol; gtap; iluc; land; lfr; life; model; production; use", "summary": "Life cycle emissions, including LUC emissions, direct processing emissions, and indirect processing emissions are to be minimized. Second, if minimization of life cycle emissions is the goal, then more focus must be directed towards more efficient and cleaner processing methods, as direct processing emissions are more than three times larger than iLUC emissions.", "mime": "application/pdf"}, {"id": "cet-79", "words": "3735", "extension": ".pdf", "flesch": "57", "author": "Wang, Z.; Jiang, Y.; Huang, Y.; Jia, X.", "title": "Complex Network Method Towards Evaluating Industrial Symbiosis ", "date": "2017", "keywords": "community; complex; detection; enterprises; index; method; mill; network; node; structure", "summary": "Combined with the method of complex network community detection, we choose spectral bisection method to achieve community structure detection of IS networks, which has obvious community structure. The quantitative detection for community structure of IS networks is feasible with the method of complex network community detection.", "mime": "application/pdf"}, {"id": "cet-80", "words": "4039", "extension": ".pdf", "flesch": "50", "author": "Wu, B.; Luo, X.-L.", "title": "Process Control and Coordinating Optimisation for the Multi- Feed Demethaniser in Ethylene Complex ", "date": "2017", "keywords": "case; control; coordinating; optimisation; output; point; process", "summary": "And there are two kinds of control strategies to achieve the control objective, which are open- loop and close-loop control, as shown in Table 1. Table 1: Control strategies for the two-input-two-output system Controlled variable Open-loop Close-loop y1 Setting control of input u1 Cascade control of output y1 y2 Setting control of input u2 Cascade control of output y2 In the distillation column, outputs y1 and y2 represent the mole fraction of the key component or temperature of the overhead and bottom, and inputs u1 and u2 represent the reflux and reboil flow rate of the bottom, respectively.", "mime": "application/pdf"}, {"id": "cet-81", "words": "2316", "extension": ".pdf", "flesch": "54", "author": "Wan, X.; Liu, B.-J.; Liang, Z.-S.; Luo, X.-L.", "title": "Switch Approach of Control Zone and Optimization Zone for Economic Model Predictive Control ", "date": "2017", "keywords": "control; empc; model; optimization; point; time; zone", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 61, 2017 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Petar S Varbanov, Rongxin Su, Hon Loong Lam, Xia Liu, Ji\u0159\u00ed J Kleme\u0161 Copyright \u00a9 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-51-8; ISSN 2283-9216 Switch Approach of Control Zone and Optimization Zone for Economic Model Predictive Control Xin Wan, Bing-Jie Liu, Zhi-Shan Liang, Xiong-Lin Luo* Department of Automation, China University of Petroleum Beijing, 102249, China luoxl@cup.edu.cn The coordination of control and optimization is proposed for economic model predictive control in the paper. The solution of economic model predictive control is gradient descent method.", "mime": "application/pdf"}, {"id": "cet-8146", "words": "2566", "extension": ".htm", "flesch": "58", "author": "Perez de los Rios, A.; Hernandez Fernandez, F.J.; Sanchez Segado, S.; Lozano Blanco, L.J.; Moreno S\u00e1nchez, J.I.; Godinez Seoane, C.", "title": "Selective Separation of Zn(ii) over Fe(iii) from Acidic Media Using Ionic Liquids as Sole Extraction Agents.", "date": "2010", "keywords": "bmim; extraction; liquids; ntf2; omim; pf6", "summary": "Among imidazolium based ionic liquids, higher extraction percentages of Fe 3+ were reached with ionic liquids based on [PF6 - ] anions respect to those based on [NTf2 - ] anions. P. S. Varbanov Copyright \u00a9 2010, AIDIC Servizi S.r.l., ISBN 978-88-95608-05-1 ISSN 1974-9791 DOI: 10.3303/CET1021105 Please cite this article as: Perez de los Rios A., Hernandez Fernandez F. J, Sanchez Segado S., Lozano Blanco L. J., Moreno S\u00e1nchez J. I and Godinez Seoane C., (2010), Selective separation of Zn(II) over Fe(III) from acidic media using ionic liquids as sole extraction agents., Chemical Engineering Transactions, 21, 625-630, DOI: 10.3303/CET1021105.", "mime": "application/pdf"}, {"id": "cet-8147", "words": "2846", "extension": ".pdf", "flesch": "57", "author": "Hernandez Fernandez, F.J.; Perez de los Rios, A.; Ginesta Anzola, A.; Sanchez Segado, S.; Lozano Blanco, L.J.; Moreno S\u00e1nchez, J.I.; Godinez Seoane, C.", "title": "Use of Ionic Liquids as \u2018green\u2019 Solvents for Extraction of Zn2+, Cd2+, Fe3+ and Cu2+ from Aqueous Solutions.", "date": "2010", "keywords": "extraction; liquids; metal; omim", "summary": "P. S. Varbanov Copyright \u00a9 2010, AIDIC Servizi S.r.l., ISBN 978-88-95608-05-1 ISSN 1974-9791 DOI: 10.3303/CET1021106 Please cite this article as: Hernandez Fernandez F. J., Perez de los Rios A., Ginesta Anzola A., Sanchez Segado S., Lozano Blanco L. J. , Moreno S\u00e1nchez J. I. and Godinez Seoane C., (2010), Use of ionic liquids as \u2018green\u2019 solvents for extraction of Zn 2+ , Cd 2+ , Fe 3+ and Cu 2+ from aqueous solutions., Chemical Engineering Transactions, 21, 631-636, DOI: 10.3303/CET1021106. Use of ionic liquids as green solvents for extraction of Zn 2+ , Cd 2+, Fe 3+ and Cu 2+ from aqueous solutions Francisco Jos\u00e9 Hern\u00e1ndez-Fern\u00e1ndez *, Antonia P\u00e9rez de los R\u00edos*, A. Ginest\u00e1, Sergio S\u00e1nchez-Segado, Luis Javier Lozano, Juan Ignacio Moreno, C. God\u00ednez Technical University of Cartagena, Dep.", "mime": "application/pdf"}, {"id": "cet-8148", "words": "2673", "extension": ".pdf", "flesch": "54", "author": "Bensakhria, A.; Leturia, M.", "title": "Natural Gas Oxy-combustion with Flue Gas Recycling for CO2 Capture.", "date": "2010", "keywords": "air; combustion; flue; gas; oxy", "summary": "The results showed that the natural gas oxy-combustion with flue gas recycling offers excellent retrofitting potential for conventional natural gas combustion system. This paper presents several experiments of natural gas combustion using air (or enriched air) or a mixture of pure oxygen mixed to recycled flue gas (O2/CO2/H2O) as oxidizer.", "mime": "application/pdf"}, {"id": "cet-8149", "words": "1823", "extension": ".pdf", "flesch": "50", "author": "Wang, J.; Monovic, V.; Eu, Y.; Anthony, E.J.", "title": "CaO-based Sorbents for Capturing CO2 in Clean Energy Processes.", "date": "2010", "keywords": "activity; calcination; carbonation; co2; sorbent", "summary": "Experimental Results and Discussion Experiments were carried out to evaluate the dependence of carbonation activity on the duration of calcination. Samples of a typical limestone was calcined for varied durations and then tested for carbonation activity.", "mime": "application/pdf"}, {"id": "cet-8150", "words": "2903", "extension": ".pdf", "flesch": "47", "author": "Muster-Slawitsch, B.; Brunner, C.; Ribeiro de Lima, D.; Schnitzer, H.", "title": "The Green Brewery Concept - Energy Efficiency and the Use of Renewable Energy Sources in Breweries.", "date": "2010", "keywords": "breweries; brewery; concept; energy; heat; integration; process; thermal", "summary": "Overall, the project \u201eGreen Brewery\u201c has shown a saving potential of over 5,000 t/y fossil CO2 emissions from thermal energy supply for the 3 breweries that were closely considered. The elaboration of the case studies as well as the concept itself follows the steps necessary in an auditing methodology for thermal energy optimization (Brunner et al., 2008).", "mime": "application/pdf"}, {"id": "cet-8151", "words": "2561", "extension": ".pdf", "flesch": "38", "author": "Huebschmann, S.; Kralisch, D.; Loewe, H.; Breuch, D.; Dietrich, T.; Scholz, R.; Jaehnisch, K.; Huebner, S.", "title": "A Deliberated Green Process Design in Microstructured Reactors by Accompanying (simplified) Life Cycle Assessmen", "date": "2010", "keywords": "assessment; cycle; environmental; life; phase; process; reaction", "summary": "However, as environmental assessment methods are regarded as being efficiently applied starting already in R&D (Zhang et al., 2008), multiple methods have been developed explicitly for application in R&D, e. g., euroMat (Fleischer and Schmidt, 1997), ECO method (Kralisch et al., 2007) as well as a 4-ary algorithm by Sugiyama et al. (2008). Both, the batch as well as the continuously running reactions are evaluated by life cycle assessment and compared with each other to derive an optimization potential.", "mime": "application/pdf"}, {"id": "cet-8152", "words": "2776", "extension": ".pdf", "flesch": "62", "author": "Kishimoto, A.; Kansha, Y.; Fushimi, C.; Tsutsumi, A.", "title": "Design Methodology of Absorption Process (use of Mea Absorbent) Based on Self-heat Recuperation Technology", "date": "2010", "keywords": "co2; consumption; energy; gas; heat; kpa; process; stripper", "summary": "Energy consumption of heat recovery process 4.2 The proposed process At first, the process shown in Figure 1 was divided into two processes for absorption and stripping. From the simulation results, energy consumption of the proposed process decreased to one-third at that of conventional heat recovery process.", "mime": "application/pdf"}, {"id": "cet-8153", "words": "2937", "extension": ".pdf", "flesch": "57", "author": "Kleinov\u00e1, A.\u0161; Cvengro\u0161ov\u00e1, Z.; Mikulec, J.; Cvengro\u0161, J.", "title": "Properties of Fame from Used Frying Oils", "date": "2010", "keywords": "content; distillation; fame; frying; gpc; oils; standard; ufome", "summary": "P. S. Varbanov Copyright \u00a9 2010, AIDIC Servizi S.r.l., ISBN 978-88-95608-05-1 ISSN 1974-9791 DOI: 10.3303/CET1021112 Please cite this article as: Kleinov\u00e1 A. , Cvengro\u0161ov\u00e1 Z., Mikulec J. and Cvengro\u0161 J., (2010), Properties of fatty acids methyl esters from used frying oils, Chemical Engineering Transactions, 21, 667-672, DOI: 10.3303/CET1021112. References Al-Kathani H.A., 1991, Survey of quality of used frying oils from restaurants.", "mime": "application/pdf"}, {"id": "cet-8154", "words": "2143", "extension": ".pdf", "flesch": "45", "author": "Toledano, A.; Andr\u00e9s, A.; Llano-Ponte, R.; Labidi, J.", "title": "Lignocellulosic Biorefinery Approach: a Challenge for a New World", "date": "2010", "keywords": "biorefinery; fraction; hemicelluloses; lignin; lignocellulosic; process; tappi; weight", "summary": "2.2 Lignin characterization The TG curves and their derivatives (DTG curves) of ultrafiltrated lignin fractions are shown in Figure 2. Lignin fractionation is a promising way to obtain specific molecular weight lignin fractions that can be used to produce high value added products.", "mime": "application/pdf"}, {"id": "cet-8155", "words": "2490", "extension": ".pdf", "flesch": "44", "author": "Iancu, P.; Velea, S.; Plesu, V.; Muscalu, C.; David, D.", "title": "Modelling and Simulation of CO2 Absorption in Alkaline Buffer Solutions in gPROMS", "date": "2010", "keywords": "absorption; c c; chemical; co2; gas; model; \uf02d \uf02d", "summary": "P. S. Varbanov Copyright \u00a9 2010, AIDIC Servizi S.r.l., ISBN 978-88-95608-05-1 ISSN 1974-9791 DOI: 10.3303/CET1021114 Please cite this article as: Iancu P., Velea S. , Plesu V., Muscalu C. and David D., (2010), Modelling and simulation of CO2 absorption in alkaline buffer solutions in gPROMS, Chemical Engineering Transactions, 21, 679-684, DOI: 10.3303/CET1021114. Modelling and Simulation of CO2 Absorption in Alkaline Buffer Solutions in gPROMS Petrica Iancu* 1 , Sanda Velea 2 , Valentin Ple\u015fu 1 , Constantin Muscalu 1 , Romeo David 1 1 Centre for Technology Transfer in the Process Industries, University POLITEHNICA of Bucharest, 1, Polizu Street, 011061 Bucharest, Romania 2 National Research & Development Institute for Chemistry and Petrochemistry ICECHIM cttip@chim.upb.ro CO2 capture of from industrial gases is an important and viable strategy for worldwide effort to reduce the human contribution to climate change. Physical model/kinetics model for CO2 absorption in Na2CO3/NaHCO3 buffer solution proposed in this paper considers following phenomena: a) Diffusion and physical absorption: CO2 Henry\u2019s law between CO2 composition in liquid phase and gas phase respectively", "mime": "application/pdf"}, {"id": "cet-8156", "words": "2949", "extension": ".pdf", "flesch": "26", "author": "Brunner, C.; Muster-Slawitsch, B.; Heig, e.; SchweigeR, h.; Vannoni, c.", "title": "Einstein \u2013 Expert System for an Intelligent Supply of Thermal Energy in Industry - Audit Methodology and Software Tool.", "date": "2010", "keywords": "audit; data; einstein; energy; heat; methodology; software; tool", "summary": "Introduction The EINSTEIN methodology for thermal energy audit that is described in this paper has been developed in the framework of the European (Intelligent Energy Europe - IEE) project EINSTEIN (www.iee-einstein.org). Based on the practical experience of a large number of energy audits in different industrial sectors, the auditing methodologies used by the different partners have been more and more standardized leading to what here is presented as the EINSTEIN audit methodology.", "mime": "application/pdf"}, {"id": "cet-8157", "words": "2745", "extension": ".pdf", "flesch": "55", "author": "Benito, O.; Alonso, E.; Lucas, S.", "title": "Beta-Glucan Enriched Products Obtained from Different Barley Milling Fractions.", "date": "2010", "keywords": "barley; extraction; flour; fractions; milling; \uf062-glucan", "summary": "Research on \uf062-glucan extraction has become more interesting in the last years due to the appeal of these polymers for the human health. However, \uf062-glucan extraction from brans was more difficult, due to its wide particle size distribution.", "mime": "application/pdf"}, {"id": "cet-8158", "words": "2813", "extension": ".pdf", "flesch": "52", "author": "Niemetz, N.; Kettl, K.H.; Narodoslawsky, M.", "title": "Revamping a Waste Processing Site with Process Synthesis", "date": "2010", "keywords": "company; heat; material; plant; process; technology; waste", "summary": "One strategic aim is to increase the total amount of dried waste, as each ton which has to be sent to waste incineration increases costs. Furthermore, the company holds 10% of a nearby Organic Rankine Cycle (ORC) plant (Obernberger and Thek, 2008) whereto the main part of waste wood is contracted to be delivered for a fixed price until 2013.", "mime": "application/pdf"}, {"id": "cet-8159", "words": "2349", "extension": ".pdf", "flesch": "41", "author": "Fung, K.Y.; Lee, C.M.; Ng, K.M.; Wibowo, C.", "title": "Integrated Design Methodology for Wastewater Treatment Plant", "date": "2010", "keywords": "design; dyeing; effluents; plant; process; simulation; treatment; wastewater", "summary": "Despite its importance, many wastewater treatment plants are still designed based on experience, leading to high consumption of chemicals, plant failure in the presence of disturbances and inappropriate selection of wastewater treatment techniques such as coagulation, adsorption, biotreatment, Fenton reaction, ozonation, multi-media filtration, membrane filtration, etc. These chemicals have to be removed from the wastewater so that it can be either safely discharged or reused for dyeing processes.", "mime": "application/pdf"}, {"id": "cet-8160", "words": "1977", "extension": ".pdf", "flesch": "45", "author": "Chipofya, V.; Avramenko, Y.; Kraslawski, A.", "title": "Case-based Design of Soche (blantyre, Malawi) Wastewater Treatment Plant", "date": "2010", "keywords": "blantyre; case; design; plant; process; treatment; wastewater", "summary": "Therefore an issue of primordial importance is ability to design wastewater treatment plants able to deal with the existing challenges. 2.1 Reference Library The purpose of the Reference Library is to provide the user with a comprehensive overview of processes and operations used for wastewater treatment.", "mime": "application/pdf"}, {"id": "cet-82", "words": "3398", "extension": ".pdf", "flesch": "49", "author": "Sun, L.; Zha, X.-L.; Luo, X.-L.", "title": "Coordination of Bypass Control and Economic Optimisation for Heat Exchanger Network with Stream Splits ", "date": "2017", "keywords": "bypass; control; economic; heat; hen; optimisation; split; stream", "summary": "Therefore, a coordination methodology of bypass control and economic optimisation is put forward for taking control performance and economic benefit into consideration meanwhile. The value of IAE or ITAE using CBCEO is larger than that using bypass control, which means control performance using CBCEO is not better than that using bypass control.", "mime": "application/pdf"}, {"id": "cet-828", "words": "3062", "extension": ".htm", "flesch": "23", "author": "Mao, Yuang; Huang, Chao", "title": "Application of Director in Organic Chemistry Experiment ", "date": "2017", "keywords": "chemistry; chemistry experiment; director; experiment; interface; material; multimedia; software; teaching; technology", "summary": "Experimental procedure 2.1 Selection of tools for producing organic chemistry experiment software In the early stages of software development, consideration should be fully taken to select the development tools. Teaching software interface is designed by Photoshop software in the composition of pictures.", "mime": "application/pdf"}, {"id": "cet-8281", "words": "2295", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-8281", "date": null, "keywords": "cash; flow; irr; npv; process; solutions", "summary": "The effects on the economic, operational, and environmental performances of optimal process flow sheets were studied since different criteria, in general, produce different optimal solutions. It was observed that optimal process flow sheets obtained by three distinct criteria differ not only in process topology and capacities but also in operating and economic figures, efficiency of feed and utility utilization, as well as the sustainability measurements, e.g. toxicological and ecological indices, and total potential environmental impact of the process.", "mime": "application/pdf"}, {"id": "cet-8282", "words": "2640", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-8282", "date": null, "keywords": "analysis; data; energy; paper; production; simulation; systems", "summary": "Furthermore there is more than one objective in energy system analysis. In energy system analysis this is not the case.", "mime": "application/pdf"}, {"id": "cet-8283", "words": "1807", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-8283", "date": null, "keywords": "activity; effect; enzyme; production; protease", "summary": "Growth kinetics and protease production The kinetics of growth and enzyme production was followed at different time intervals. Optimization of production medium and protease production condition The effect of pH on protease production was determined by growing bacteria in fermentation media of different pH (7-12) using appropriate buffers.", "mime": "application/pdf"}, {"id": "cet-8284", "words": "2788", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-8284", "date": null, "keywords": "capacity; case; crude; furnace; heat; hen", "summary": "Furthermore, the hectically change in price of crude oil and products make inevitable to make capable the refinery process units for processing different type of crude oils. 4. Conclusions Results of feasibility study for increase in crude oil capacity by 20% and/or improve in feed flexibility of atmospheric distillation unit meantime improve in the energy efficiency were presented.", "mime": "application/pdf"}, {"id": "cet-8285", "words": "2656", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-8285", "date": null, "keywords": "flow; gas; network; node; overpressure; pipeline", "summary": "Analyzing calculation results from Figure 4 we can note, that entering into network gas flow with overpressure of pwe,Z1 = 2.2 kPa it is impossible to provide gas supply to all output nodes with overpressure of p > 1.7 kPa (as gas overpressure in node is pA147 < 1.8 kPa). Tao W.Q. and Ti H.C., 1998, Transient analysis of gas pipeline network.", "mime": "application/pdf"}, {"id": "cet-8286", "words": "2188", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-8286", "date": null, "keywords": "absorption; behaviour; crabtree; effect; glucose; growth", "summary": "This is a phenomenon related that relates glucose concentrations with the particular catabolic pathway adopted by glucose-sensitive cells, in that even in the presence of oxygen fermentation predominates over respiration. By cultivation on glucose concentration of 50mg/L, the absorption was increased exponentially from 0.2 to 0.26 within 4 h.", "mime": "application/pdf"}, {"id": "cet-8287", "words": "2502", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-8287", "date": null, "keywords": "ash; combustion; design; gases; incinerator; process; steam; waste", "summary": "Introduction Most incinerators used to burn garbage are mixed waste incinerators, usually referred to as MWS incinerators. HCl emissions from burning municipal waste in starved-air or excess-air incinerators have ranged from 53-724 ppm before the exhaust gas is treated, but HCl emission levels vary widely and reflect variations in feed stock.", "mime": "application/pdf"}, {"id": "cet-8288", "words": "2295", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-8288", "date": null, "keywords": "catalyst; gas; gasoline; hydrogen; membrane; reactor; synthesis", "summary": "The optimized parameters for first approach Tshell (K) TF (K) Particle size(m) 550.0792 552.5302 0.0035 The simulation of membrane reactor is carried out using optimization results in Table 1 and the results of this simulation are shown in several figures. Optimal catalyst size and temperature profile along the reactor were obtained and 3.1815 % additional C5 + yield was resulted in optimized system relative to membrane FTS reactor.", "mime": "application/pdf"}, {"id": "cet-8289", "words": "2203", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-8289", "date": null, "keywords": "bioleaching; catalyst; medium; pulp; step", "summary": "The results of metal recovery showed that the optimum pulp density for spent catalyst bioleaching occurred at 1 % w/v in one-step (Figure 1), 3 % w/v in two-step (Figure 2) and 1% w/v in spent medium leaching (Figure 3). Rich Spent Hydro-Cracking Catalyst Using Adapted Penecillum simplicissimum BBRC-20019 Farnaz Amiri1*, Soheyla Yaghmaei1, Seyyed Mohammad Mousavi2,3 1Department of Petroleum & Chemical Engineering, Sharif University of Technology, Azadi street, P.O.Box 9465, 11365, Tehran, Iran 2Biotechnology Group, Dpt. of Chemical Engineering, Tarbiat Modares University, Iran 3 Dept. of Chemical Technology, Lappeenranta University of Technology, Finland farnaz655@yahoo.com This study was designed to compare one-step, two-step and spent medium bioleaching of spent catalyst by adapted Penecillum simplicissimum in batch cultures.", "mime": "application/pdf"}, {"id": "cet-8290", "words": "2552", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-8290", "date": null, "keywords": "coal; combustion; content; demineralization; samples; treatment", "summary": "0,00E+00 5,00E-05 1,00E-04 1,50E-04 2,00E-04 2,50E-04 3,00E-04 3,50E-04 4,00E-04 0 100 200 300 400 500 600 i li in te ns it\u00e0 tal qu CH3C Na2C 0 0,00002 0,00004 0,00006 0,00008 0,0001 0 100 200 300 400 500 600 in te ns it\u00e0 ta C N 0,00E+00 2,00E-06 4,00E-06 6,00E-06 8,00E-06 1,00E-05 1,20E-05 1,40E-05 1,60E-05 1,80E-05 2,00E-05 0 100 200 300 400 500 600 in te ns it\u00e0 ta C M \ufffd : untreated \u00a1: CH3COOH+H2O2 \u00a1 MeOH+Na2CO3 EC KLK ME KU Figure 2: Sulfur related fragments emitted during the combustion of untreated and treated coal samples. In any event, the main objective of such works was to expand the knowledge of the key aspects in order to contribute to the realization of suitable processes for coal demineralization.", "mime": "application/pdf"}, {"id": "cet-83", "words": "3167", "extension": ".pdf", "flesch": "60", "author": "Sun, L.; Zhao, B.-S.; Luo, X.-L.", "title": "Optimal Heat Exchanger Network Synthesis with Detailed Shell and Tube Heat Exchanger Design Based on Superstructure Model ", "date": "2017", "keywords": "design; exchanger; heat; hen; model; number; shell; transfer; tube", "summary": "Some scholars took account of the selection of heat exchanger and heat transfer enhancement equipment selection during the integration optimization of heat exchanger network. Moita R.D., Fernandes C., Matos H.A., Nunes C.P., 2004, A cost-based strategy to design multiple shell and tube heat exchangers, ASME J. Heat Trans, 126, 119-130.", "mime": "application/pdf"}, {"id": "cet-833", "words": "3085", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-833", "date": null, "keywords": "calcium; dosage; effect; inhibitor; scale; scale inhibitor; solution; temperature", "summary": "Figure 2: Scale inhibitor SQ-1211 scale inhibitor with the dosage of the change in the law (solution temperature: 100\u00b0C, time 24 hours) 206 3. Dosing (mg / L) 70 degrees Celsius 80 degrees Celsius 90 degrees Celsius 100 degrees Celsius Figure 3: Effect of scale inhibitor dosage and reaction temperature on scale inhibition It can be seen from Figure 3 that with the increase of scale inhibitor dosage, the scale inhibition rate first increases and then decreases (Lumbreras et al., 2017).", "mime": "application/pdf"}, {"id": "cet-834", "words": "3046", "extension": ".pdf", "flesch": "25", "author": null, "title": "cet-834", "date": null, "keywords": "control; doi; lag; lag system; linear; stability; system; time; time lag", "summary": "Background, content and methods researched in this paper are systematically described in this chapter with focuses as basic characteristics of time lag system & robust control and research status (Du et al., 2017). DOI: 10.3303/CET1762036 Please cite this article as: Mingli Zhou, 2017, Robust control theory for time lag system in chemical engineering and its application, Chemical Engineering Transactions, 62, 211-216 DOI:10.3303/CET1762036 211 2.", "mime": "application/pdf"}, {"id": "cet-835", "words": "3130", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-835", "date": null, "keywords": "accuracy; classification; doi; ieee; image; model; prediction; seed; sensing", "summary": "Technical route for hyperspectral image identification of the seed See the technical route of hyperspectral image identification system of the seed in Figure 2, which includes the collection of hyperspectral images, correction and preprocessing of images, image division and feature extraction (Wang et al., 2017); the prediction is implemented to the samples to be tested by modelling and using the well-trained models so as to achieve the seed purity identification (Xia et al., 2016). The hyperspectral data is subject to the wave-band selection with the combination of stoichiometry, the mathematical model set up by using hyperspectral image is upgraded, and the seed purity is also tested.", "mime": "application/pdf"}, {"id": "cet-836", "words": "2695", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-836", "date": null, "keywords": "base; boron; earth; friction; graphene; magnetic; oil; test; wear", "summary": "Experiment of anti-wear and friction reduction of graphene and boron magnetic rare earth 3.1 Effect of the mixture of graphene and boron magnetic rare earth on the wear spot diameter The boron magnetic rare earth used in the compound test is a kind of complex type lubricating oil additives, and the sulfur content is low, which is a kind of environment-friendly additives. The wear scar diameter (WSD) values obtained after graphene and boron magnetic rare earth compound experiment are shown in Table 1, where G is the graphene, and T2012 refers to boron magnetic rare earth (Mandava et al., 2016).", "mime": "application/pdf"}, {"id": "cet-837", "words": "3332", "extension": ".pdf", "flesch": "38", "author": null, "title": "cet-837", "date": null, "keywords": "ball; ball milling; capacity; doi; ieee; lithium; materials; milling; particle; pristine; sio2; transactions", "summary": "SiO2 materials after 40h and 80h of ball milling both present high cycle stability even after 100 cycles. The influence of milling periods on particle size, morphology and distribution of the materials are systematically studied, revealing the mechanism of how they affect the electrochemical lithium storage performance of SiO2 materials.", "mime": "application/pdf"}, {"id": "cet-838", "words": "3977", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-838", "date": null, "keywords": "chemical; emulsion; hollow; janus; materials; microspheres; nanoparticles; particles; polymer; surface", "summary": "Janus particles are distributed at the oil / water interface and the Janus particles are prepared by selective modification of the surface (Hong and Jiang, 2006; Liu et al., 2009; Wang et al., 2011; Wang et al., 2010), which is suitable for larger sized particles. Amongst, Janus particles and multihollow polymer particles have received considerable attention over the last decade.", "mime": "application/pdf"}, {"id": "cet-839", "words": "2717", "extension": ".pdf", "flesch": "43", "author": null, "title": "cet-839", "date": null, "keywords": "energy; formation; formation energy; material; modulus; vacancy; young", "summary": "Yu X.H., Wang Y., Zhan Z.L., Liu Z., 2014, A correlation between vacancy formation energy and bonding energy, Transactions of materials and heat treatment, 36, 230-232, DOI: 10.1016/0036-9748(75)90564-5 Yu X.H., Zhan Z.L., Rong J., Liu Z., Li L., 2014, Vacancy formation energy and size effects, Chemical Physics Letters, 600, 43-45, DOI: 10.1016/j.cplett.2014.03.046 Zhang X.Y., Zhao X.C., Jia C., Liu Q., 2008, A new method for calculating the vacancy formation energy of typical-structure metals, Journal of Chongqing University, (12), 1342-1345. According to the research results, vacancy formation energy and Young modulus are the external reflection of the binding energy with a regular linear relationship between them, and the proportionality coefficient ranges from 0.005 to 0.008.", "mime": "application/pdf"}, {"id": "cet-84", "words": "4004", "extension": ".pdf", "flesch": "38", "author": "Gu, S.; Liu, L.; Bai, Y.; Zhang, J.; Du, J.", "title": "Heat Exchanger Networks Synthesis Considering Dynamic Flexibility ", "date": "2017", "keywords": "control; design; flexibility; heat; network; operating; output; problem; time", "summary": "Similarly, dynamic flexible design can also handle the disturbances and the more important to it to be employed to find the trade-off between the over-synthesis degree and control quality, i.e. design cost and control cost. Dynamic flexible design differs from steady-state flexible design in the sense that the dynamic models are considered as constraint and a series of time-varied disturbances are involved.", "mime": "application/pdf"}, {"id": "cet-840", "words": "2423", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-840", "date": null, "keywords": "failure; figure; impact; material; theory; time", "summary": "iR t x t x t x x dV b x t\u03c1 = \u2212 \u2212 +\uf0f2u x f u u\uf026\uf026 j R\u2200 \u2208 (1) In Formula, \u03c1 stands for the density of material point i, xi and xj for location of i and j, u(xi, t) and u(xj, t) for the displacement of material points i and j; u(xi, t) means the secondary derivation of u(xj, t) for time, i.e. DOI: 10.3303/CET1762042 Please cite this article as: Guohao Zhang, Songrong Qian, 2017, Application study of peridynamics theory in failure analysis of brittle material, Chemical Engineering Transactions, 62, 247-252 DOI:10.3303/CET1762042 247 acceleration speed, b(xi, t)means the external density on material point i, R the near field and the radium in this field is denoted with \u03b4 shown in formula(2) and Figure 1; the bold-type letter means vector. 1. Introduction Based on the motion equation in integral form, PD is the non-local continuum mechanics theory, mainly for solving the discontinuity caused by material failure, such as cracks.", "mime": "application/pdf"}, {"id": "cet-841", "words": "2974", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-841", "date": null, "keywords": "acid; concentration; corrosion; inhibitor; rate; table", "summary": "4. Results and discussion 4.1 Formula Optimization of JA composite acid (1) Screening of JA complex acid The sensitivity experiments of many kinds of acid were conducted, and the results are shown in Table 3. The evaluation of corrosion resistance indicated that the corrosion rate of JA composite acid could be reduced from 11.92 to 1.92 g/(m2\u2022h) when the corrosion inhibitor H was loaded at the concentration of 1%.", "mime": "application/pdf"}, {"id": "cet-842", "words": "3179", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-842", "date": null, "keywords": "alloy; corrosion; potential; solder; solder alloy; zn20snxcu", "summary": "Sample results and analysis 3.1 Impact of Cu on Zn20Sn solder corrosion potential The electrochemical corrosion polarization curve and the corrosion potential of Zn20SnxCu solder alloy are shown in Figure 1. Zn20SnxCu solder alloy is eroded uniformly; there is an obvious passivation area caused by the formation of the dense corrosion products on the surface of solder alloy. Zn20Sn4Cu solder corrosion surface is shown in Figure 4.", "mime": "application/pdf"}, {"id": "cet-843", "words": "3314", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-843", "date": null, "keywords": "iron; method; oxide; particles; pigment; preparation; process; surface; yellow", "summary": "DOI: 10.3303/CET1762045 Please cite this article as: Ke Lu, 2017, Preparation and surface modification of transparent yellow iron oxide pigment, Chemical Engineering Transactions, 62, 265-270 DOI:10.3303/CET1762045 265 Table 1: Properties of yellow iron pigment 2. Preparation of Transparent Iron Yellow There can be found many methods for preparation of transparent yellow iron oxide pigment in the literature.", "mime": "application/pdf"}, {"id": "cet-844", "words": "3957", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-844", "date": null, "keywords": "channel; doi; flow; heat; heat transfer; microchannel; transfer; wavy", "summary": "Keywords: simultaneously developing; pulsating flow; heat transfer; laminar; microchannel; numerical. Some techniques to enhance heat transfer by using turbulators proposed by Bhattacharyya et al., (2016, 2016, 2017).", "mime": "application/pdf"}, {"id": "cet-8459", "words": "9", "extension": ".pdf", "flesch": "84", "author": "Abushwireb, F.; Elakrami, H.; Emtir, M.", "title": "THE EFFECT OF SOLVENT SELECTION ON ENERGY-INTEGRATED EXTRACTIVE DISTILLATION FOR AROMATICS RECOVERY FROM PYROLYSIS GASOLINE: SIMULATION AND OPTIMIZATION", "date": "2009", "keywords": "microsoft", "summary": "Microsoft Word - presContent.doc 243 244 245 246 247 248", "mime": "application/pdf"}, {"id": "cet-8461", "words": "95", "extension": ".htm", "flesch": "-152", "author": "Harkin, T.; Hoadley, A.; Hooper, B.", "title": "REDUCING THE ENERGY PENALTY OF CO2 CAPTURE AND STORAGE USING PINCH ANALYSIS", "date": "2009", "keywords": "aaaaa", "summary": "255 256 257 258 259 260 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8462", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Atkins, M.; Walmsley, M.; Morrison, A.; Kamp, P.", "title": "CARBON EMISSIONS PINCH ANALYSIS (CEPA) FOR EMISSIONS REDUCTION IN THE NEW ZEALAND ELECTRICITY SECTOR", "date": "2009", "keywords": "prescontrofacciata.pdf", "summary": "261 262 263 264 265 266 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8463", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Kallas, T.; Chabanon, E.; Germain, G.; Bouallou, C.", "title": "EXPERIMENTAL STUDY OF CO2 ABSORPTION IN A HOLLOW FIBER MEMBRANE CONTACTOR", "date": "2009", "keywords": "aaaaa", "summary": "267 268 269 270 271 272 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8464", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Halim, I.; Srinivasan, R.", "title": "A SIMULATION-OPTIMIZATION FRAMEWORK FOR EFFICIENT CO2 CAPTURE USING AMINE ABSORPTION", "date": "2009", "keywords": "prescontrofacciata.pdf", "summary": "273 274 275 276 277 278 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8465", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Gonzalez-Garza, D.; Rivera-Tinoco, R.; Bouallou, C.", "title": "COMPARISON OF AMMONIA, MONOETHANOLAMINE, DIETHANOLAMINE AND METHYLDIETHANOLAMINE SOLVENTS TO REDUCE CO2 GREENHOUSE GAS EMISSIONS", "date": "2009", "keywords": "aaaaa", "summary": "279 280 281 282 283 284 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8466", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Shibata, C.; Palma, M.", "title": "RECOVERY OF PRIORITY POLLUTANTS FROM AQUEOUS SOLUTIONS THROUGH LIQUID-LIQUID EXTRACTION WITH SIMULTANEOUS TREATMENT OF ACID GASES", "date": "2009", "keywords": "aaaaa", "summary": "285 286 287 288 289 290 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8467", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Wozny, G.; Grote, A.; Klein, A.", "title": "COMMUNICATION AND COOPERATION PLATFORM FOR MULTIDISCIPLINARY PROJECT MANAGEMENT", "date": "2009", "keywords": "aaaaa", "summary": "291 292 293 294 295 296 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8468", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Nagy, K.", "title": "THE CONCEPT OF ENERGY SECURITY IN THE LIGHT OF GLOBAL SECURITY", "date": "2009", "keywords": "prescontrofacciata.pdf", "summary": "297 298 299 300 301 302 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8469", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Lam, H.L.; Varbanov, P.; Klemes, J.", "title": "REGIONAL RESOURCE MANAGEMENT COMPOSITE CURVE", "date": "2009", "keywords": "aaaaa", "summary": "303 304 305 306 307 308 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8470", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Costoiu, M.; Isopescu, R.; Plesu, V.; Arsene, I.; Alesincu, H.S.; Iancu, P.", "title": "NEW DEVELOPMENTS FOR ELECTRONIC DOCUMENT MANAGEMENT IN UNIVERSITY POLITEHNICA OF BUCHAREST", "date": "2009", "keywords": "prescontrofacciata.pdf", "summary": "309 310 311 312 313 314 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8471", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Kovacs, K.I.", "title": "SPATIAL INFORMATICS FOR EMISSION REDUCTION", "date": "2009", "keywords": "aaaaa", "summary": "315 316 317 318 319 320 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-8472", "words": "95", "extension": ".pdf", "flesch": "-152", "author": "Dell'Orco, M.; Sassanelli, D.; Tiso, A.", "title": "OPTIMIZATION OF LOGISTICS IN INDUSTRIAL DISTRICTS THROUGH CREATION OF A COMMUNITY OF AGENTS", "date": "2009", "keywords": "aaaaa", "summary": "321 322 323 324 325 326 presControfacciata.pdf presContents.pdf presIndiceAutoriLibro.pdf aaaaa 197Friedler.pdf 6Smith.pdf 145Gundersen.pdf 5Hirata.pdf 22Matsuda.pdf 77Kansha.pdf 20Smejkal.pdf 59Siitonen.pdf 50Oosthuizen.pdf 206Crilly.pdf 49Oosthuizen.pdf 57Shuhaimi.pdf 105Tovazhnyansky.pdf 124Promvitak.pdf 185Bulatov.pdf 189Basri.pdf 190Varbanov.pdf 38Tang.pdf 8Wang.pdf 63Kanniche.pdf 122Wongsarnpigoon.pdf 104Ipsakis.pdf 101Teles.pdf 192Dubuis.pdf 188Vlyssides.pdf 193Girardin.pdf 28Borchardt.pdf 30Reyes.pdf 64Statyukha.pdf 89Brinkmann.pdf 106Steltenpohl.pdf 107Graczova.pdf 128Parisutkul.pdf 133Promvitak.pdf 154Khoshgoftar.pdf 164Walmsley.pdf 166Urbaniec.pdf 194Aboushwierb.pdf 16Tan.pdf 10Harkin.pdf 142Atkins.pdf 95Kallas.pdf 55Halim.pdf 94Gonzalez-Garza.pdf 111Shibata.pdf 26Wozny.pdf 204Nagy.pdf 88Lam.pdf 153Costoiu.pdf 207Kovacs.pdf 46Dell'Orco.pdf 201Bessarabov.pdf 113Claassen.pdf 90Miltner.pdf 96Foglia.ps 168Markowski.pdf 157Boran.pdf 163Gebicki.pdf 176Martins.pdf 93Liu.pdf 47Holmberg.pdf 87Afsar.pdf 98Modarresi.pdf 162Beggel.pdf 100Alva-Argaez.pdf 62Poplewski.pdf 73Hippinen.pdf 17Al-Mutairi.pdf 29De Benedetto.pdf 69Ruohonen.pdf 4Noureldin.pdf 165Atkins.pdf 140Rivera.pdf 84Friedler.pdf 158Varga.pdf 172Johansson.pdf 179Mikulec.pdf 1Sie.pdf 13Bumbac.pdf 23Smejkal.pdf 25Ciambelli.pdf 70Guidi.pdf 121Tomo.pdf 148Seita.pdf", "mime": "application/pdf"}, {"id": "cet-85", "words": "3763", "extension": ".pdf", "flesch": "45", "author": "Fan, Y.V.; Lee, C.T.; Klemes, J.J.", "title": "Challenges for Energy Efficiency Improvement Anaerobic Digestion (AD) ", "date": "2017", "keywords": "biogas; digestion; energy; potential; pre; production; studies; substrate; treatment; waste", "summary": "This overview attempts to interpret the mentioned aspects for AD energy efficiency enhancement. Table 1: Categorised criteria for AD study.", "mime": "application/pdf"}, {"id": "cet-86", "words": "4000", "extension": ".pdf", "flesch": "58", "author": "Yin, Y.; Li, S.; Chen, K.; Wang, L.; Lin, M.; Wang, Q.", "title": "Experimental Study on Pressure Distributions around a Circular Cylinder in the Branch of a T-junction ", "date": "2017", "keywords": "benchmark; d h; h =; pressure", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 61, 2017 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Petar S Varbanov, Rongxin Su, Hon Loong Lam, Xia Liu, Ji\u0159\u00ed J Kleme\u0161 Copyright \u00a9 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-51-8; ISSN 2283-9216 Experimental Study on Pressure Distributions around a Circular Cylinder in the Branch of a T-junction Yantao Yina, Shicong Lia, Kai Chena, Liangbi Wangb, Mei Lina, Qiuwang Wanga* aKey Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi\u2019an Jiaotong University, Xi\u2019an, Shaanxi 710049, P.R. China bDepartment of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou, Gansu, 730070, P.R. China wangqw@mail.xjtu.edu.cn DOI: 10.3303/CET1761033 Please cite this article as: Yin Y., Li S., Chen K., Wang L., Lin M., Wang Q., 2017, Experimental study on pressure distributions around a circular cylinder in the branch of a t-junction, Chemical Engineering Transactions, 61, 211-216 DOI:10.3303/CET1761033 211 2.", "mime": "application/pdf"}, {"id": "cet-87", "words": "3540", "extension": ".pdf", "flesch": "49", "author": "Yu, K.D.S.; Aviso, K.B.; Promentilla, M.A.B.; Chiu, A.S.F.; Tan, R.R.", "title": "An Input-Output Approach to Analysing the Relative Influence of Journals: The Case of Process Integration Journals ", "date": "2017", "keywords": "citations; energy; influence; input; jclp; journals; output; source", "summary": "Input-output and DEMATEL approach for measuring journal influence During the early stages of developing citation indices, Leontief (1996) proposed the use of the structure of the I-O table to model the flow of scientific knowledge, however, no specific direction was developed to evaluate such flows. Conclusions Existing measures of journal influence have been compared with the I-O based metrics.", "mime": "application/pdf"}, {"id": "cet-88", "words": "2425", "extension": ".pdf", "flesch": "51", "author": "Li, Q.; Wang, J.; Min, C.; Tian, K.; Tian, L.; Sunden, B.", "title": "Effect of an Upstream Unconnected Bulge on Film Cooling ", "date": "2017", "keywords": "bulge; cooling; effectiveness; film; upstream", "summary": "Koc et al. (2006) numerically investigated film cooling effectiveness of five different curved surface. Na et al. (2007) studied influence of the upstream ramp on film cooling effectiveness at low blowing ratios.", "mime": "application/pdf"}, {"id": "cet-89", "words": "2095", "extension": ".pdf", "flesch": "57", "author": "Tian, K.; Wang, J.; Chen, Z.; Yang, L.; Ahmed, G.; Sunden, B.", "title": "Effect of Hole Blockage Configurations on Film Cooling in Gas Turbine Components ", "date": "2017", "keywords": "blockage; cooling; effectiveness; figure; film; hole", "summary": "Description of Geometry A three-dimensional (3D) geometry is used to coolant path investigate film cooling effectiveness by considering the effect of the hemispherical and tetrahedral blockage as shown in Figure 1. Results and Discussion Figure 4: Wall film cooling effectiveness for different hemispherical blockage cases.", "mime": "application/pdf"}, {"id": "cet-8912", "words": "3740", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-8912", "date": null, "keywords": "battery; current; electrolysis; hydrogen; module; room; scenario; seawater; terminal", "summary": "More specifically, the study reveals that a proper electric insulation of the surface of battery terminals represents a sensible mitigation strategy to reduce the severity of explosions in addition to the ventilation of the battery room. The flowrate of hydrogen released from each battery module was quantitatively assessed in both an unprotected scenario and in a mitigated scenario, in which battery terminals are protected with insulation.", "mime": "application/pdf"}, {"id": "cet-8913", "words": "2604", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-8913", "date": null, "keywords": "analysis; engineering; investment; project; risk; sales; software; v1.0", "summary": "\u2018The downside risk of project portfolios: The impact of capital investment projects and the value of project efficiency and project risk management programmes\u2019, International Journal of Project Management. This software allows the financial evaluation of investment projects in fixed assets considering all the projections that support this evaluation, which also become elements of control and monitoring, positioning it as well as a tool of primary use in the evaluation of all types of projects.", "mime": "application/pdf"}, {"id": "cet-8914", "words": "3448", "extension": ".pdf", "flesch": "26", "author": null, "title": "cet-8914", "date": null, "keywords": "approach; data; exposure; information; measures; measuring; noise; test; workers", "summary": "The authors launched an experimental application of the Tuggle method, originally implemented to process noise data belonging to normal distribution, proved by the third step of the proposed method (Table 2). These equipment could improve the quality of noise data, being on board of the operators, and following them during their working tasks, often very difficult to schematize and accurately define.", "mime": "application/pdf"}, {"id": "cet-8915", "words": "3248", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-8915", "date": null, "keywords": "biogas; compressor; grade; iec; pressure; release; ventilation; zone", "summary": "In order to determine this parameter, sources emission contemporaneity has to be considered, because hazardous biogas concentrations can be present both near the source and far from the release point (Pietrangeli and Lauri, 2018). Lauri R., Pietrangeli B., Bragatto P.A., 2013, Safe operation of biogas plants in Italy, Chemical Engineering Transactions,32, 199-204, DOI:10.3303/CET1332034.", "mime": "application/pdf"}, {"id": "cet-8916", "words": "2767", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-8916", "date": null, "keywords": "air; explosion; methanol; pressure; vol", "summary": "Explosion pressure, rate of explosion pressure rise and deflagration index of the methanol mixture reach maximum values near the stoichiometric concentration at 17 vol. Sk\u0159\u00ednsk\u00fd J., Sk\u0159\u00ednsk\u00e1 M., 2014, Calculation of maximum explosion pressure for gaseous C1-C3 oxidiser mixtures with different initial temperatures in a spherical closed volume.", "mime": "application/pdf"}, {"id": "cet-8917", "words": "3553", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-8917", "date": null, "keywords": "case; figure; fire; forest; liquid; lpg; tank; temperature; wall", "summary": "ISBN 978-88-95608-64-8; ISSN 2283-9216 CFD Study of the Behavior of LPG Tanks Exposed to Forest Fires Giordano E. Scarponia,*, Frederic Heymesb, aLISES - Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Alma Mater Studiorum - Universit\u00e0 di Bologna, via Terracini n.28, 40131 Bologna, Italy. A computational fluid dynamic (CFD) model was applied to simulate the response of LPG tanks of different sizes exposed to a forest fire scenario.", "mime": "application/pdf"}, {"id": "cet-8918", "words": "2861", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-8918", "date": null, "keywords": "blast; design; pressure; wave", "summary": "The symbols have the following meaning: Pr = maximum reflected pressure on the front-side PSO = maximum pressure on the rear-side td = positive phase duration of the pressure wave \u2206t = D/us = time required for pressure wave passing across an object of diameter (D) with shock velocity (us) Differential pressure PDP can be calculated, at each time-step, using the equations below (valid for \u2206t \u2264 td/2): = \u2219 2\u2044 \u2212 \u2219 \u2212 \u22062\u2044 \u2264 2\u2044 \u2219 \u22122\u2044 \u2212 \u2219 \u2212\u22062\u2044 > 2\u2044 (7) Figure 2 (from UFC 3-340- 02), shows the graphical relation between dynamic pressure and incident (side-on) pressure, in U.S. customary units.", "mime": "application/pdf"}, {"id": "cet-8919", "words": "2907", "extension": ".pdf", "flesch": "34", "author": null, "title": "cet-8919", "date": null, "keywords": "energy; explosion; explosion pressure; gas; gas explosion; ignition; ignition energy; pressure", "summary": "Test results and analysis 3.1 Influence of ignition energy o gas explosion pressure First, the influence of ignition energy on gas explosion pressure was studied. References Ajrash M.J., Zanganeh J., Moghtaderi B., 2016, Effects of ignition energy on fire and explosion characteristics of dilute hybrid fuel in ventilation air methane, Journal of Loss Prevention in the Process Industries, 40(10), 207-216, DOI:10.1016/j.jlp.2015.12.014 Benedetto A.D., Garciaagreda A., Russo P., Sanchirico R., 2012, Combined effect of ignition energy and initial turbulence on the explosion behavior of lean gas/dust-air mixtures, Industrial & Engineering Chemistry Research, 51(22), 7663-7670, DOI:10.1021/ie201664a Cui G., Zeng W., Li Z., Fu Y., Li H., Chen J., 2016, Experimental study of minimum ignition energy of methane/air mixtures at elevated temperatures and pressures, Fuel, 175, 257-263, DOI:10.1016/j.fuel.2016.02.025 Dumitrache C., Boissiere A., Baumgardner M., Marchese A., Yalin A., Maria A., Roucis J., 2015, Laser ignition of methane-air mixtures: an investigation of the lean limit and minimum ignition energy, Value in Health, 9(6), A230, DOI:10.1364/lic.2015.w3a.4 Jiang B., Lin B., Shi S., Zhu C., Ning J., 2012, Numerical simulation on the influences of initial temperature and initial pressure on attenuation characteristics and safety distance of gas explosion, Combustion Science & Technology, 184(2), 135-150, DOI:10.1080/00102202.2011.622321 Jiang B., Lin B., Shi S., Zhu C., Qian L., Cheng Z., 2012, A numerical simulation of the influence initial temperature has on the propagation characteristics of, and safe distance from, a gas explosion, International Journal of Mining Science and Technology, 22(3), 307-310, DOI:10.1016/j.ijmst.2012.04.004 Lei P., Tian J., Wei Y., Xu Y., 2012, Hazard characteristics from gas explosion in underground constructions, Procedia Engineering, 43, 293-296, DOI:10.1016/j.proeng.2012.08.050 Li R.Z., Huang Z.C., Si R.J., 2013, Influence of environmental temperature on gas explosion pressure and its rise rate, Explosion & Shock Waves, 33(4), 415-419.", "mime": "application/pdf"}, {"id": "cet-8920", "words": "2868", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-8920", "date": null, "keywords": "air; bend; explosion; flame; gasoline; overpressure; pipe; pressure; space", "summary": "In the fields with pipelines, tunnels, cave depots and other works (Qi et al., 2016), the internal structure in confined space is complex and diverse, and there are a certain number of branches (Li et al., 2016), bends (Zhou et al., 2006), etc. It is of great significance to improve the safety of industrial production by conducting research on explosions that occur in confined spaces containing curved pipe structures.", "mime": "application/pdf"}, {"id": "cet-8921", "words": "3525", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-8921", "date": null, "keywords": "chemical; dust; explosion; finishing; marmo; metal; process; samples; waste", "summary": "Blasting finishing samples are examined in the work by BGIA (2009), while Myers (2015) focused on the mitigation procedures to reduce explosion risk of polishing/buffing dust samples. Dust samples from foundry waste are all classified as NE, due to their oxidized nature, although exhibiting very low d10, up to 0.5 \u00b5m.", "mime": "application/pdf"}, {"id": "cet-8922", "words": "3670", "extension": ".pdf", "flesch": "60", "author": null, "title": "cet-8922", "date": null, "keywords": "blast; blasting; bottles; column; explosive; fragmentation; plastic; rock; trial", "summary": "Figure 1(A): The snapshot of the plastic bottles used in trial blasts; (B): Cross section of blast hole charged by inserting plastic bottles in the explosive column; (C): Snapshot showing face of the trial blast and muck pile resulted after the trial blast. The actual powder factor, boulder count, loading densities for trial blast conducted by introducing the bottles are presented in Table 2(B).", "mime": "application/pdf"}, {"id": "cet-8923", "words": "3564", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-8923", "date": null, "keywords": "case; chemical; explosion; fire; index; methods; process; risk; safety; substances", "summary": "In this work, three real accidents were tested with three real fire and explosion risk evaluation methods, among the most adopted worldwide: \uf0fc F&EI \u201cFire and Explosion Index, by DOW Chemical Company; \uf0fc 0% 20% 40% 60% 80% 100% SW&HI F&EI Mond Overall Case 1 Case 2 Case 3 219 Table 2: Main parameters implemented by methods for the different case studies Case study Key-substance(s) Process conditions Special credits/penalties 1 N-butyl acetate Operative flow in the tanks loading Fire protection devices 2 Hydroxylamine sulphate Storage, Release due to high temperatures of fire Incompatibility in storage class, absence of fire safety devices 3 Hydraulic oil (properties of n- dodecanol) High pressure system No shutdown system The assessment was then repeated by introducing adequate protection systems and management procedures to verify the actual variation of risk indices.", "mime": "application/pdf"}, {"id": "cet-8924", "words": "2415", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-8924", "date": null, "keywords": "damage; number; position; sensors; wave; wsm", "summary": "To measure the effect of diminishing the number of active sensors, the ratio between the distance of the computed maximum position of ( , ) or ( , ) and the actual notch position and the radius Ra has been computed. In term of SHM, the sensibility of the methods to the number of active sensors is important: due to failures, one or more sensors can become inoperative.", "mime": "application/pdf"}, {"id": "cet-8925", "words": "3030", "extension": ".pdf", "flesch": "29", "author": null, "title": "cet-8925", "date": null, "keywords": "analysis; feed; hazop; model; process; reactor; study; temperature", "summary": "This contribution provides retrospective analysis of application issues connected with the use of process simulations in computer aided HAZOP studies. The goal of this study is to identify the main obstacles in the implementation of computer aided HAZOP study based on process simulations in chemical industry.", "mime": "application/pdf"}, {"id": "cet-90", "words": "3399", "extension": ".pdf", "flesch": "49", "author": "Mikulcic, H.; von Berg, E.; Wang, X.; Vujanovic, M.; Tan, H.; Duic, N.", "title": "Using an Advanced Numerical Technique for Improving Pulverized Coal Combustion inside an Industrial Furnace ", "date": "2017", "keywords": "air; cement; chemical; coal; combustion; kiln; numerical; process; rotary; study", "summary": "Elattar et al. (2014) numerically investigated the confined non-premixed jet flames inside rotary kilns for gaseous fuels, to understand the flame behaviour and heat transfer. Elattar H.F., Stanev R., Specht E., Fouda A., 2014, CFD simulation of confined non-premixed jet flames in rotary kilns for gaseous fuels, Computers and Fluids, 102, 62\u201373.", "mime": "application/pdf"}, {"id": "cet-91", "words": "3753", "extension": ".pdf", "flesch": "45", "author": "Promentilla, M.A.B.; Janairo, J.I.B.; Yu, D.E.C.", "title": "A Green Chemistry-based Decision Modelling Approach for Optimal Selection of Nanomaterial\u2019s Synthesis Method ", "date": "2017", "keywords": "alternative; approach; carbon; cost; criteria; decision; potential; process; synthesis", "summary": "However, optimal selection of such green synthesis method is a complex decision making problem under DOI: 10.3303/CET1761038 Please cite this article as: Promentilla M.A.B., Janairo J.I.B., Yu D.E.C., 2017, A green chemistry-based decision modelling approach for optimal selection of nanomaterial\u2019s synthesis method, Chemical Engineering Transactions, 61, 241-246 DOI:10.3303/CET1761038 241 uncertainty that requires an integration of both tangible and intangible criteria in the evaluation process. An illustrative case study: selection of carbon nanotube synthesis methods In this case study, it is assumed that in the product development stage of selecting the most promising technology for synthesizing carbon nanotubes will involve criteria that are consistent with the green chemistry principles.", "mime": "application/pdf"}, {"id": "cet-9101", "words": "2771", "extension": ".htm", "flesch": "36", "author": "Xie, Fen", "title": "Respiratory Odor Recognition and Disease Diagnosis Method of Gastric Cancer Based on the Concept of Combination of Disease and Syndrome", "date": "2018", "keywords": "cancer; detection; diagnosis; gases; gastric; nose; patients; system", "summary": "(2) By comparing with the respiratory gases of healthy people, the VOC markers and warning substances of respiratory gases in patients with gastric cancer were qualitatively verified, which also laid a theoretical foundation for the detection of gastric cancer by e-nose respiratory gas detection system. 4.4 E-nose respiratory gas detection system Figure 7: Composition of e-nose respiratory gas detection system 401 Based on the above experiments, we obtained the characteristic gases of several gastric cancer patients.", "mime": "application/pdf"}, {"id": "cet-9102", "words": "2853", "extension": ".pdf", "flesch": "35", "author": "Liu, Yu; Fan, Yimeng; Jia, Baomin", "title": "The Technique of Extracting and Detecting Athletes' Oral Odors Based on the Analysis of Biological Characteristics", "date": "2018", "keywords": "analysis; diseases; extraction; figure; gas; odors; patients; people", "summary": "Oral odors are sometimes only mental and sometimes temporary, but athletes\u2019 oral odors are an important indicator of physical health (Migliario, 2011) and are early symptoms of certain diseases (Rosenberg, 2006), such as gastrointestinal diseases, diabetes (Calloway, 1969), liver diseases and other diseases, which occur with oral odors. As shown in the figure, pathological oral odors are classified into oral and non-oral odors, of which about 80% of oral odors are caused by oral diseases.", "mime": "application/pdf"}, {"id": "cet-9103", "words": "2354", "extension": ".pdf", "flesch": "47", "author": "Lafhal, Sofia; Herrier, Cyril; Livache, Thierry; Guillot, Jean-Michel", "title": "Development of a New Instrumental Measurement of Odorous VOCs Based On Precise Fingerprints Obtained by a Multitude of Biosensors", "date": "2018", "keywords": "analysis; chemical; compounds; device; figure; measurement; neose; sensors", "summary": "The basis of electronic noses is sensor array where odorous VOCs interact on the sensor surface. The global device is illustrated by Figure 2: The first step is odorous air pumping (1); followed by the transport of the compounds in the chamber (2); then there is an interaction of the compounds with chemical sensors on a prism with a thin layer of gold (3).", "mime": "application/pdf"}, {"id": "cet-9104", "words": "3646", "extension": ".pdf", "flesch": "29", "author": "Yan, Rui; Li, Miaomiao; Wang, Yao; Fu, Yao", "title": "Analysis for Improvement of Kitchen Odour by Oil Fume Purification Technology", "date": "2018", "keywords": "combustion; cooking; fume; fume purification; kitchen; method; oil; purification; purification method; technology; washing", "summary": "DOI: 10.3303/CET1868070 Please cite this article as: Yan R., Li M., Wang Y., Fu Y., 2018, Analysis for improvement of kitchen odour by oil fume purification technology, Chemical Engineering Transactions, 68, 415-420 DOI: 10.3303/CET1868070 415 2.2 The main components of cooking oil fume From the formation process of lampblack, it can be seen that lampblack is a kind of aerosol with three phases of gas, liquid and solid. 418 Table 2: Kitchen odour evaluation results before and after the treatment of fume purification Purification technology Pre-fume treatment Treating for 0.25h Treating for 0.5h Treating for 1h Treating for 2h Mechanical purification 1.5 2 2.5 3 3 Electrostatic purification 1.5 3 3.5 4 4 Adsorption purification 1.5 3 3.5 4 4 Filtering purification 1.5 2.5 3 3.5 3.5 Washing purification 1.5 2.5 3 3.5 3.5 Composite purification 1.5 3 3.5 4 4 Catalytic combustion 1.5 3.5 4 4 4 3.3 Comprehensive comparative analysis of fume purification technology This paper makes a comprehensive comparative analysis of the fume purification technology in terms of tech- nicality and economy.", "mime": "application/pdf"}, {"id": "cet-9105", "words": "3058", "extension": ".pdf", "flesch": "40", "author": "Rybarczyk, Piotr; Szulczynski, Bartosz; Gebicki, Jacek", "title": "Investigations on the Removal of Hydrophobic Odorous Volatile Organic Compounds by Biotrickling Filtration Monitored With Electronic Nose", "date": "2018", "keywords": "air; biofiltration; btf; compounds; gas; nose; pinene; process; removal", "summary": "These methods found successful application for monitoring of changes of odorous compounds concentration in biofiltration process (Szulczy\u0144ski et al., 2018). Selected odorous compounds, identified in the nearby of municipal waste and wastewater treatment plants are specified in Table 1 (Lewkowska et al., 2016;", "mime": "application/pdf"}, {"id": "cet-9106", "words": "2724", "extension": ".pdf", "flesch": "45", "author": "Caceres, Juan; Duran Acevedo, Cristhian; Gualdron Guerrero Oscar, Eduardo", "title": "Thermal Desorption System for Breath Samples Analysis from Colombian Patients with Gastric Cancer", "date": "2018", "keywords": "analysis; breath; cancer; data; desorption; figure; patients; samples; sensors; system", "summary": "DOI: 10.3303/CET1868072 Please cite this article as: C\u00e1ceres J., Duran Acevedo C., Gualdron Guerrero O.E., 2018, Thermal desorption system for breath samples analysis from colombian patients with gastric cancer, Chemical Engineering Transactions, 68, 427-432 DOI: 10.3303/CET1868072 427 Taking as reference the last study, present proposal was done with a group of Colombian patients wit gastric cancer and under control (persons with similar diseases), using an electronic nose system, based on gold nanoparticles sensors (GNP), obtaining promissory results. Figure 4a, shows the functional prototype of thermal desorption system, which was made with stainless steel SAE-316, SAE-316L in order to avoid pollution, oxidation and any damage of the components.", "mime": "application/pdf"}, {"id": "cet-9107", "words": "3853", "extension": ".pdf", "flesch": "33", "author": "Zhao, Lingling", "title": "Photocatalyst Technology for Deodorization in Household Refrigerator Based on Odor Removal", "date": "2018", "keywords": "air; concentration; deodorization; effect; gas; odor; photocatalyst; rate; reaction; refrigerator; surface; tio2", "summary": "Photocatalyst deodorization technology integrated with the traditional refrigerator odor removal, air filter and adsorption, plasma and other technologies organically will significantly improve the purification effect of odor gas, and push forward the upgrade of refrigerator deodorization technology. ISBN 978-88-95608-65-5; ISSN 2283-9216 Photocatalyst Technology for Deodorization in Household Refrigerator Based on Odor Removal Lingling Zhao School of Information and Electrical Engineering, Ludong University, Yantai 264025, China zll765200@163.com This paper describes what the sources of odor gas are in the refrigerator and analyzes how well the existing deodorization technology seems like.", "mime": "application/pdf"}, {"id": "cet-9108", "words": "4228", "extension": ".pdf", "flesch": "45", "author": "Garcia-Perez, Teresa; Lopez, Juan; Passos, Fabiana; Lebrero, Raquel; Revah, Sergio; Munoz, Raul", "title": "Optimization of CH4 Removal from Diluted Emissions and Continuous PHB Production by Methylocystis hirsuta: Towards GHG Biorefineries", "date": "2018", "keywords": "ch4; ebrt; gas; h-1; m-3; min; phb; production", "summary": "Finally, it is important to stress that the high PHB productivities reached in this study were obtained with CH4 diluted streams (4 % v/v), compared to studies conducted at higher CH4 concentrations and supporting slightly higher accumulations of PHB (Rahnama et al. 2012). L\u00f3pez J.C., Quijano G., P\u00e9rez R., Mu\u00f1oz R., 2014, Assessing the influence of CH4 concentration during culture enrichment on the biodegradation kinetics and population structure, Journal Environmental.", "mime": "application/pdf"}, {"id": "cet-9109", "words": "3661", "extension": ".pdf", "flesch": "29", "author": "Liu, Zhaohui; Shu, Xin; Lin, Rui; Liu, Na; Luo, Ping", "title": "SiO2 Adsorption Aerogel Odor Dissipation Control Technology Based on Active Purification Technology", "date": "2018", "keywords": "air; air quality; car; concentration; conditions; odor; quality; road; time; vehicle", "summary": "Science of the Total Environment, 367(1), 89-95, DOI: 10.1016/j.scitotenv.2006.01.007 Mizuno H., Takenaka O., Uchiyama K., Kaneko H., 1998, Prevention of car air conditioner oder-rotten oder arising from microorganism and its prevention, Jitsumu Hyomen Gijutsu, 49(4), 391-395, DOI: 10.4139/sfj.49.391 Mizuno H., Uchiyama K., Sato S., Sakakibara K., Sako R., 1996, Surface treatment for air conditioners - study to reduce odor from car air conditioner evaporator, Jsae Review, 17(4), 456, DOI: 10.1016/s0389- 4304(96)80708-9 Morvan M., Talou T., Beziau J.F., 2003, Mos-mosfet gas sensors array measurements versus sensory and chemical characterisation of voc\u2019s emissions from car seat foams, Sensors & Actuators B Chemical, 95(1\u2013 3), 212-223, DOI: 10.1016/s0925-4005(03)00425-8 Ongwandee M., Kruewan A., 2013, Evaluation of portable household and in-car air cleaners for air cleaning potential and ozone-initiated pollutants, Indoor & Built Environment, 22(4), 659-668, DOI: 10.1177/1420326x12460254 Sattar S.A., Zargar B., Wright K.E., Rubino J.R., Ijaz M.K., 2017, Airborne pathogens inside automobiles for domestic use: assessing in-car air decontamination devices using staphylococcus aureus as the challenge bacterium, Appl Environ Microbiol, 83(10), DOI: 10.1128/aem.00258-17 Stemmler K., Bugmann S., Buchmann B., Reimann S., Staehelin J., 2005, Large decrease of voc emissions of switzerland's car fleet during the past decade: results from a highway tunnel study, Atmospheric Environment, 39(6), 1009-1018, DOI: 10.1016/j.atmosenv.2004.10.010 Szczurek A., Maciejewska M., 2016, Categorisation for air quality assessment in car cabin, Transportation Research Part D Transport & Environment, 48, 161-170, DOI: 10.1016/j.trd.2016.08.015 Tamainot-Telto Z., Metcalf S.J., Critoph R.E., 2009, Novel compact sorption generators for car air conditioning, International Journal of Refrigeration, 32(4), 727-733, DOI: 0.1016/j.ijrefrig.2008.11.010 Taniguchi Y., Aoki H., Fujikake K., Tanaka H., Kitada M., 1992, Study on car air conditioning system controlled by car occupants' skin temperatures-part 1: research on a method of quantitative evaluation of car occupants' thermal sensations by skin temperatures. References Brodzik K., Faber J., Go\u019adakopek A., \u0141omankiewicz D., 2016, Impact of multisource voc emission on in-vehicle air quality: test chamber simulation, Materials Science and Engineering, 148(1), 012033, DOI: 10.1088/1757-899x/148/1/012033 Deng A., 2018, Sio2 carrier dispersed perovskite for solar thermal decomposition of h2o, Chemical Engineering Transactions, 66, 355-360, DOI:10.3303/CET1866060 Grabow M., Spak S., Holloway T., Stone B.J., Mednick A., Patz J., 2012, Air quality and exercise-related health benefits from reduced car travel in the midwestern united states, Environmental Health Perspectives, 120(1), 68-76,DOI: 10.1289/ehp.1103440 Kaneko H., Takenaka O., Mizuno H., 2009, Control of car air conditioner odors, coating odor, Journal of the Surface Finishing Society of Japan, 48(7), 733-739, DOI: 10.4139/sfj.48.733 Li T.T., Bai Y.H., Liu Z.R., Liu J.F., Zhang G.S., Li J.L., 2006, Air quality in passenger cars of the ground railway transit system in beijing, china.", "mime": "application/pdf"}, {"id": "cet-9110", "words": "2784", "extension": ".pdf", "flesch": "49", "author": "Oliva, Giuseppina; Zarra, Tiziano; Naddeo, Vincenzo; Munoz, Raul; Lebrero, Raquel; Angeles, Roxana; Belgiorno, Vincenzo", "title": "Comparative Analysis of AOPs and Biological Processes for the Control of VOCs Industrial Emissions", "date": "2018", "keywords": "0,00; 1,00; criteria; criterion; processes; treatment; vocs", "summary": "Furthermore, the synergic effects among different waste gas treatments could be identified analysing the scores of the different alternatives for the single criteria. This method allowed to assign scores to different alternatives by using a pairwise comparison between different criteria (Hossaini et al., 2015; Kabir et al., 2014).", "mime": "application/pdf"}, {"id": "cet-9111", "words": "3001", "extension": ".pdf", "flesch": "41", "author": "Wang, Juan; Chen, Jifeng; Wang, Yiren; Wang, Ye; Yan, Hongling; Yan, Zhi", "title": "Odour Treatment Method of Wastewater Treatment Plant Based on Biological Oxidation Process", "date": "2018", "keywords": "effect; gas; h2s; odour; oxidation; process; removal; treatment", "summary": "Sewage contains a large number of anaerobic organisms, which produce odours in the process of consuming DOI: 10.3303/CET1868077 Please cite this article as: Wang J., Chen J., Wang Y., Wang Y., Yan H., Yan Z., 2018, Odour treatment method of wastewater treatment plant based on biological oxidation process, Chemical Engineering Transactions, 68, 457-462 DOI: 10.3303/CET1868077 457 organic matter (Holman and Wareham, 2003). Odour treatment based on biological oxidation process 3.1 Biological process-based odour treatment The odour treatment based on biological process is: organic pollutants are first contacted with water and dissolved in water; due to the differential concentration, the organic matter is further diffused from the liquid film into the biofilm after being dissolved in water, and then is absorbed by the microbes in the biofilm; afterwards, the microorganism through the metabolism can eventually turn the foul smell in the waste gas into the energy and carbon source, and decompose the organic matter into water and carbon dioxide; thus, the odour treatment is finally fulfilled.", "mime": "application/pdf"}, {"id": "cet-9112", "words": "3229", "extension": ".pdf", "flesch": "44", "author": "Angeles, Roxana; Oliva, Giuseppina; Zarra, Tiziano; Naddeo, Vincenzo; Belgiorno, Vincenzo; Munoz, Raul; Lebrero, Raquel", "title": "Comparative Evaluation of a Biotrickling Filter and a Tubular Photobioreactor for the Continuous Abatement of Toluene", "date": "2018", "keywords": "btf; co2; gas; h-1; m-3; stage; toluene; tpbr", "summary": "Similar REs of 89 \u00b1 3 % (with an average EC of 12.8 \u00b1 3.1 g m-3 h-1) and mineralization ratios of 42 % were recorded in stage III at a GRT of 45 s. Finally, in stage IV, the system demonstrated its capacity to cope with higher toluene inlet concentrations, maintaining previous removals and reaching maximum ECs = 20.9 \u00b1 1.5 g m-3 h-1. Cin, tol: inlet toluene concentration;", "mime": "application/pdf"}, {"id": "cet-9113", "words": "3158", "extension": ".pdf", "flesch": "49", "author": "Sarno, Maria; Ponticorvo, Eleonora", "title": "Pt/Pd-Fe3O4 Nanoparticles for Removal of Humic Acids and Cr(VI)", "date": "2018", "keywords": "et al; fe3o4; nanoparticles; removal; water", "summary": "Sarno M., Iuliano M., Polichetti M., Ciambelli P., 2017a, High activity and selectivity immobilized lipase on Fe3O4 nanoparticles for banana flavour synthesis, Process Biochemistry, 56, 98-108. Sarno M., Ponticorvo E., Cirillo C., 2016b, High surface area monodispersed Fe3O4 nanoparticles alone and on physical exfoliated graphite for improved supercapacitors, Journal of Physics and Chemistry of Solids, 99, 138\u2013147.", "mime": "application/pdf"}, {"id": "cet-92", "words": "3748", "extension": ".pdf", "flesch": "53", "author": "Kapustenko, P.O.; Arsenyeva, O.P.; Matsegora, O.I.; Kusakov, S.K.; Tovazhnianskyi, V.I.", "title": "The Mathematical Modelling of Fouling Formation Along PHE Heat Transfer Surface ", "date": "2017", "keywords": "channel; flow; fouling; heat; model; parameters; phe; surface; temperature; transfer", "summary": "As is summarised by Malayeri et al. (2017) according to analysis of different publications, the conservative estimation of heat exchanger fouling leads to conclusion that additional cost for fouling in industrialised countries is in the order of 0.25 % of Gross Domestic Product (GDP). The fouling formation on heat transfer surfaces is determined by a number of factors, among which one of the most important is temperature.", "mime": "application/pdf"}, {"id": "cet-9233", "words": "3978", "extension": ".htm", "flesch": "48", "author": "Qammar, Hina; Hecht, Felix; Skiborowski, Mirko; Gorak, Andrzej", "title": "Experimental Investigation and Design of Rotating Packed Beds for Distillation", "date": "2018", "keywords": "casing; liquid; mass; packing; rotor; rpb; separation; speed; transfer", "summary": "A maximum of 3.7 transfer units was achieved for a rotor with outer packing diameter of 0.36 m and an axial height of 0.01 m. Special emphasize in this experimental study is placed on the analysis of the contributions to mass transfer from the packing and the casing, which can contribute significantly to the overall mass transfer in RPBs. Most of these studies attribute all of the measured mass transfer in an RPB to the packing (Kelleher and Fair, 1996), while not differentiating between mass transfer in the casing and the packing.", "mime": "application/pdf"}, {"id": "cet-9234", "words": "2834", "extension": ".pdf", "flesch": "54", "author": null, "title": "cet-9234", "date": null, "keywords": "drop; gas; liquid; loads; operating; pressure; speed", "summary": "If the applied gas load to the column exceeds a certain limit a slight increase in pressure drop and liquid hold up becomes recognizable. This strong increase of pressure drop is followed by a maximum which is usually accompanied by significant entrainment.", "mime": "application/pdf"}, {"id": "cet-9235", "words": "3207", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-9235", "date": null, "keywords": "emim][meso3; gas; liquids; pure; silica; water", "summary": "DOI: 10.3303/CET1869112 Please cite this article as: Radakovitsch F., Heym F., Jess A., 2018, Gas drying using supported ionic liquids, Chemical Engineering Transactions, 69, 667-672 DOI: 10.3303/CET1869112 667 Ionic liquids exhibit still better handling as adsorbens in supported state than in liquid phase due to often high viscosity, high melting points and, as may be the case, corrosiveness. In the present work a screening of the relevant physical and chemical properties for a gas drying process by supported ionic liquids is conducted.", "mime": "application/pdf"}, {"id": "cet-9236", "words": "2917", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-9236", "date": null, "keywords": "l l; liquid; mass; transfer", "summary": "The boundary conditions for the velocity field are given by 0v 0xz,L = = , 0v Wxz,L = = , 0v 0yz,L = = , 0v LHyz,L = = , (11) and those for the concentration field by 0 x c 0x L = \u2202 \u2202 = , 0 x c Wx L = \u2202 \u2202 = , 0 y c 0y L = \u2202 \u2202 = and LHy L D N y c L \u2212= \u2202 \u2202 = , with Wx0 \u2264\u2264 and LHy0 \u2264\u2264 . In reason of the similarity between the transport mechanisms in both fluid channels, only the equations for the liquid channel are presented in this section as follows: The Navier-Stokes equation writes 674 dz dp1 y v x v L L 2 z,L 2 2 z,L 2 \u22c5\u2212= \u2202 \u2202 + \u2202 \u2202 \u03bc .", "mime": "application/pdf"}, {"id": "cet-9237", "words": "3188", "extension": ".pdf", "flesch": "48", "author": null, "title": "cet-9237", "date": null, "keywords": "column; distillation; film; mass; naphtha; separation; temperature", "summary": "DOI: 10.3303/CET1869114 Please cite this article as: Querino M.V., Marangoni C., Machado R., 2018, Indirect series of falling film distillation column to process synthetic naphtha, Chemical Engineering Transactions, 69, 679-684 DOI: 10.3303/CET1869114 679 2. While that the energy savings provided by indirect series on falling film distillation column correspond a 12 % of the conventional mode of distillation column.", "mime": "application/pdf"}, {"id": "cet-9238", "words": "4223", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-9238", "date": null, "keywords": "absorption; charge; chemical; droplets; electrification; gas; liquid; so2; spray; water", "summary": "d. Matteson and Giardina (1974) \u2013 SO2 mass transfer coefficient of charged water droplets as a function of the droplet surface charge; e. Carleson and Berg (1983) \u2013 Dimensionless SO2 concentration in the liquid phase as a function of the electric field applied to the spray in 200 mL/min of pure SO2 gas. Di Natale, F., Carotenuto, C., Lancia, A., 2016a, Enhanced SO2 removal by using charged water droplets, Chemical Engineering Transactions, pp.", "mime": "application/pdf"}, {"id": "cet-9239", "words": "3422", "extension": ".pdf", "flesch": "56", "author": null, "title": "cet-9239", "date": null, "keywords": "efficiency; liquid; model; point; rel; section; tray; vapor", "summary": "Based on the analysis of the experimental data points and the benchmarking, we recommend using the stripping factor to determine tray efficiencies. However, the resulting difference between Lewis case 1 and 3 is negligible, particularly for point efficiencies below 0.8.", "mime": "application/pdf"}, {"id": "cet-9240", "words": "2812", "extension": ".pdf", "flesch": "61", "author": null, "title": "cet-9240", "date": null, "keywords": "column; gas; ifpen; liquid; transfer; wang", "summary": "ISBN 978-88-95608-66-2; ISSN 2283-9216 Hydraulic and Mass Transfer Performances of a Commercial Hybrid Packing: The RSP200X - Key Modelling Parameters for Gas Treatment Applications Pascal Alixa *, John Roeslera, Xavier Courtialb, Gauthier Perdub, Michael Schultesc a IFP Energies nouvelles, BP 3, 69360 Solaize, France b PROSERNAT Tour PACIFIC, 11-13 cours Valmy, 92977, Paris La D\u00e9fense Cedex, France c RASCHIG GmbH, Mundenheimer Stra\u00dfe 100, D-67061 Ludwigshafen, Germany pascal.alix@ifpen.fr The use of the last generation of Raschig\u2019s structured packings, Raschig SuperPack (RSP) has been investigated for scrubbing columns operating at high liquid loads, for their potential to increase capacity while maintaining mass transfer efficiencies at high levels. IFPEN has measured pressure drops, flooding limits, liquid and gas side mass transfer coefficients and interfacial areas for the RSP 200X. Flooding limits were in agreement with literature, however at high liquid loads and for tested X-Style RSP they were 30-40% lower than those calculated with the Winsorp Software.", "mime": "application/pdf"}, {"id": "cet-9241", "words": "2539", "extension": ".pdf", "flesch": "64", "author": null, "title": "cet-9241", "date": null, "keywords": "capacity; feed; hifi; revamp; table; tower; trays", "summary": "Conclusions The revamp of the Norco, Louisiana C2 Splitter (PV-1767) with 152 Shell HiFi Plus trays resulted in a significant improvement of tray efficiency and capacity. This study included the full revamp of all trays on a tray-for-tray basis from the very old 4-Pass trays to the modern Shell HiFi Plus trays.", "mime": "application/pdf"}, {"id": "cet-9242", "words": "3233", "extension": ".pdf", "flesch": "50", "author": null, "title": "cet-9242", "date": null, "keywords": "density; distributor; liquid; packing; point; pour; pour point", "summary": "Olujic et al. (2009) illustrated experimentally the DOI: 10.3303/CET1869119 Please cite this article as: Cai T., 2018, Pour point density estimations for packed columns with structured packing, Chemical Engineering Transactions, 69, 709-714 DOI: 10.3303/CET1869119 709 effect of pour point density on liquid distribution performance with three different sizes of structured packings. Table 1: Structured packing pour point densities with different specific surface areas Packing size* Specific surface area, m2/m3 Pour point density, points/m2 250Y 250 60 350Y 350 102 500Y 500 160 *The crimp angle for these packings is assumed to be 90 degrees As expected, more pour points are required for a higher specific surface area packing.", "mime": "application/pdf"}, {"id": "cet-9243", "words": "4235", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-9243", "date": null, "keywords": "column; design; diameter; distillation; efficiency; flow; liquid; maldistribution; packing; scale; sulzer", "summary": "Progress, 63, 9, 53-65 Cai T.C., Chen G.X., Fitz C.W., Kunesh J.G., 2003, Effect of bed length and vapor maldistribution on structured packing performance, Trans IChemE, Vol 81, Part A, 85-93 Changez N.D., Sawistowski H., 1963, Effect of maldistribution on the performance of packed columns, The Industrial Chemist, April, 181-185 Edwards D.P., Krishnamurthy K.R., Potthoff R.W., 1999, Development of an improved method to quantify maldistribution and its effect on structured packing column performance, Trans IChemE, 77, Part A, 656- 662 Fitz C.W., King D.W., Kunesh J.G., 1999, Controlled liquid maldistribution studies on structured packing, Chem. Research and Design, 99, 2-13 Pavlenko A.N., Zhukov V.E., Pecherkin N.I., Chekhovich V.Y., Sunder S., Houghton P., Serov A.F., Nazarov A.D., 2006, Separation of mixtures and distribution of a liquid in structured packing in a large-scale model of a distillation column, Theoretical foundations of chemical engineering, 40, 4, 329-338 Pavlenko A.N., Zhukov V.E., Pecherkin N.I., Chekhovich V.Y., Sunder S., Houghton P., 2010, Development of mixture composition maldistribution in a distillation column with structured packing, Theoretical Foundations of Chemical Engineering, 44, 6, 869-876 Stikkelman R.M., 1989, Gas and liquid maldistribution in packed columns, PhD Thesis, University of Technology, Delft, NL Stoter, 1993, Modeling of maldistribution in structured packings: from detail to column design, PhD Thesis, University of Technology, Delft, NL Yuan H.-c., Spiegel L., 1982, Theoretical and Experimental Investigation of the Influence of Maldistribution on the Performance of Packed Columns at Partial Reflux, Chem.-Ing.-Tech., 54, 8, 774-775 Zuiderweg F.J., Kunesh J.G., King D.W., 1993, A model for the calculation of the effect of maldistribution on the efficiency of a packed column, Trans IChemE, Vol 71, Part A, 38-44 720", "mime": "application/pdf"}, {"id": "cet-9244", "words": "2552", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-9244", "date": null, "keywords": "area; bed; column; figure; nexring; packing; ring", "summary": "With that facility, standard absorption tests with air/CO2-NaOH system for determination of effective interfacial area (Duss et al., 2001) are possible but also absorption tests for determination of kG and kL (Hegely et al., 2017). Those results are outstanding and propel the NeXRing to the class of 4th generation high performance rings.", "mime": "application/pdf"}, {"id": "cet-9245", "words": "2576", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-9245", "date": null, "keywords": "flow; holdup; liquid; packings; ray; sandwich", "summary": "To provide detailed information on the heterogeneous flow patterns to derive reliable process models, ultrafast X-ray tomography is applied as a non-invasive measurement technique with high temporal and spatial resolution. DOI: 10.3303/CET1869122 Please cite this article as: Sohr J., Schubert M., Flechsig S., Kenig E., Hampel U., 2018, Experimental investigation of fluid dynamics in sandwich packings with ultrafast x-ray tomography, Chemical Engineering Transactions, 69, 727-732 DOI: 10.3303/CET1869122 727 Yildirim et al. (2015) adapted the Wallis plot method to determine the loading limits of sandwich packings.", "mime": "application/pdf"}, {"id": "cet-9246", "words": "3465", "extension": ".pdf", "flesch": "63", "author": null, "title": "cet-9246", "date": null, "keywords": "efficiency; flow; liquid; point; tray", "summary": "An important conclusion was that if downcomers could be developed to realize parallel liquid flow patterns on trays (corresponding to the Lewis Case 2), it would lead to higher tray efficiencies, than the conventional counter-current flow patterns (Lewis Case 3). Gains from tray efficiency enhancements can also be invested in decreasing operational expenses.", "mime": "application/pdf"}, {"id": "cet-9247", "words": "3689", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-9247", "date": null, "keywords": "cell; column; distribution; gas; liquid; load; model; packing", "summary": "Prediction of liquid distribution is used to reduce column design uncertainties, for example by implementing mass transfer calculations in liquid distribution models (Higler et al., 1999). ISBN 978-88-95608-66-2; ISSN 2283-9216 Development and Application of the TUM-WelChem Cell Model for Prediction of Liquid Distribution in Random Packed Columns Florian Hanuscha,*, Volker Engelb, Robert Kendera, Sebastian Rehfeldta, Harald Kleina a Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Boltzmannstr. 15, 85748 Garching, Germany b WelChem GmbH, Brunnenweg 40, 83666 Waakirchen, Germany florian.hanusch@tum.de Liquid maldistribution is, next to the prediction of interfacial phase area and mass transfer coefficients, one of the bigger uncertainties in random packed column design.", "mime": "application/pdf"}, {"id": "cet-93", "words": "4163", "extension": ".pdf", "flesch": "44", "author": "Promentilla, M.A.B.; Tapia, J.F.D.; Aviso, K.B.; Tan, R.R.", "title": "Optimal Selection of Low Carbon Technologies using a Stochastic Fuzzy Multi-Criteria Decision Modelling Approach ", "date": "2017", "keywords": "carbon; criteria; decision; energy; level; matrix; priorities; priority; promentilla", "summary": "Low carbon energy systems are thus being developed, promoted and deployed as part of the solution portfolios to address climate change. In this work, a Stochastic Fuzzy Analytic Network Process (SFANP) model was developed and applied in the prioritization of low carbon energy systems considering such uncertainty.", "mime": "application/pdf"}, {"id": "cet-94", "words": "3346", "extension": ".pdf", "flesch": "45", "author": "Igboamalu, T.E.; Chirwa, E.M.N.", "title": "As(III) Oxidation and Cr(VI) Reduction Insight in an Indigenous Mixed Culture of Anaerobic Bacteria from a Local Environment ", "date": "2017", "keywords": "as(iii; bacteria; concentration; cr(vi; figure; oxidation; reduction", "summary": "In an experiment containing 30 to100 mg/L of Cr(VI) at a constant 120 mg/L As(III) concentrations, near complete Cr (VI) reduction at initial concentrations from 30 to70 mg/L was observed Lower removal efficiency was seen when Cr(VI) concentration was increased to 100 mg/L. These experiments suggest that Cr(VI) reduction in the presence of As(III) was not inhibited at higher As(III) concentration, rather As(III) enhanced the redox process by acting as inorganic electron donor for Cr(VI) reduction.", "mime": "application/pdf"}, {"id": "cet-9421", "words": "3344", "extension": ".htm", "flesch": "37", "author": "Luo, Jing; Liu, Jingjing; Liu, Qian", "title": "Study on Environmental Management and Ecological Restoration of Coal Mine Wasteland", "date": "2018", "keywords": "area; coal; design; environmental; land; landscape; mining; restoration; soil; subsidence", "summary": "Kumar et al. used grey constellation clustering method to divide Mentougou coal mining area into ecological restoration area, ecological maintenance area and ecological conservation area, selected three indicators of ecological damage degree, population density and per capita income, and defined the restoration mode and direction of the three areas. Saini et al. carried out ecological engineering reclamation planning and design for urban coal mining subsidence area, and designed nine reclamation zones including crop, vegetable planting area, solid waste filling reclamation and cultivation area, ecological agricultural park, deep water aquaculture area, crop reclamation area and shallow subsidence reclamation area, so as to achieve the purpose of improving economic efficiency as well as improving economic performance (Saini et al., 2016).", "mime": "application/pdf"}, {"id": "cet-9422", "words": "3714", "extension": ".pdf", "flesch": "50", "author": "Song, Yanjie; Jia, Zhijun; Zhang, Guojun", "title": "Research on Heat Economy of Drive Scheme for Generator Boiler Feed Pump", "date": "2018", "keywords": "drive; efficiency; energy; feed; power; pump; scheme; steam; units", "summary": "In summary, the above research work mainly focuses on the research of feed water pump drive scheme in existing power plants, which mainly involves the implementation of some schemes, and the advantages and disadvantages of the schemes, but lacks of research on the thermal economy of its units. Mrzljak et al. pointed out that if the wet-cooling conditions of small units could be met in some areas, steam pumps could be considered.", "mime": "application/pdf"}, {"id": "cet-9423", "words": "3229", "extension": ".pdf", "flesch": "35", "author": "Chang, Guofeng", "title": "Research on Integration of Heating Network Management and Control Based on Cloud Computing", "date": "2018", "keywords": "cloud; computing; control; data; energy; heating; management; network; system; temperature; water", "summary": "DEIO are mainly responsible for aggregating and coordinating multiple DOI: 10.3303/CET1871140 Please cite this article as: Chang G., 2018, Research on integration of heating network management and control based on cloud computing, Chemical Engineering Transactions, 71, 835-840 DOI:10.3303/CET1871140 835 virtual power plants in the virtual power system. There are not many researches related to cloud network-based integration of heat network management and control.", "mime": "application/pdf"}, {"id": "cet-9424", "words": "2842", "extension": ".pdf", "flesch": "43", "author": "Yu, Guanglong; Wang, Hongguang", "title": "Study on the Performance of Alkali-Based Geopolymer under Vacuum and Freeze-Thaw Cycles", "date": "2018", "keywords": "alkali; geopolymer; glass; setting; slag; sodium; time; water", "summary": "844 4.2 Initial setting and final setting time of liquid water glass based geopolymer It can be seen from Figure 5 that in the slag-based geopolymer activated by liquid water glass, when the modulus of the liquid water glass is fixed, the initial setting time decreases as the water glass addition amount decreases, and the final setting time increases as the amount of water glass addition decreases. Figure 4 shows the effect of the mass ratio of slag to dry powder water glass (sodium silicate) on initial setting and final setting time.", "mime": "application/pdf"}, {"id": "cet-9425", "words": "3048", "extension": ".pdf", "flesch": "47", "author": "Lou, xiaoming; Huang, Jiali; Li, Tanping", "title": "Nanosheets Self-Assembled 3D LiFeO4/Graphene as Cathode Material for Lithium-Ion Batteries", "date": "2018", "keywords": "batteries; capacity; composite; feo4; graphene; ion; lithium; material; nanosheets; performance", "summary": "Compared with pure FeO4 material, FeO4/GP composite effectively improves the electrochemical property of the material. FeO4 nanoflowers and graphene nanosheets are interconnected to form a 3D network structure, so that graphene can effectively wrap the FeO4 nanoflowers, and the excellent flexibility of graphene can effectively buffer the volume expansion of FeO4 anode material during charging and discharging, so as to improve the cycle performance of the material.", "mime": "application/pdf"}, {"id": "cet-9426", "words": "3824", "extension": ".pdf", "flesch": "48", "author": "Pang, Shenghua", "title": "Study on Overflow Characteristics and Pollution Control of Sewage Pipe Network", "date": "2018", "keywords": "days; network; overflow; pipe; pollutants; rainfall; sewage; volume; water", "summary": "Principles and methods To understand overflow sewage water quality changes in the intercepting confluence pipelines on sunny days and rainy days, H sampling points are monitored for several cycles. Improving the flow of river water into pipe network is the primary way to control the pollution of sewage overflow.", "mime": "application/pdf"}, {"id": "cet-9427", "words": "3047", "extension": ".pdf", "flesch": "45", "author": "Zheng, Zhong; Zhao, Yunsheng; Zhang, Jindong; Du, Jianhua", "title": "Chemical Oxygen Demand of Oily Wastewater Treatment by Ti/CeO2", "date": "2018", "keywords": "anode; ceo2; chemical; doi; electrode; surface; tio2; treatment; wastewater", "summary": "They show that the major diffraction peaks of XRD characterizations of TiO2 film prepared by anodizing-laser forging are stronger than those of Ruiqin Mine TiO2. In this experiment, the surface electron transfer resistance Retis measured according to the Nyquistmap of Ti / TiO2 electrodes scanned by CHI660A workstation to conduct a preliminary study on the photocatalytic performance of TiO2 film.", "mime": "application/pdf"}, {"id": "cet-9428", "words": "3299", "extension": ".pdf", "flesch": "32", "author": "Zhang, Yu", "title": "Calculation and Optimization for Energy Saving Effect of China\u2019s Energy Conservation and Consumption Reduction Methods Based on E-G Cointegration and Granger Causality Analysis", "date": "2018", "keywords": "china; consumption; effect; energy; energy consumption; growth; intensity; progress", "summary": "Especially since the outbreak of the oil crisis in the 20th century, the research on energy consumption has received special attention. Domestic and foreign scholars mainly focus on industrial restructuring, scientific and technological progress, energy prices, the relationship between energy substitution and energy consumption, and energy economic and environmental systems.", "mime": "application/pdf"}, {"id": "cet-9429", "words": "2978", "extension": ".pdf", "flesch": "27", "author": "Xu, Meng", "title": "Comprehensive Impact Assessment Model of Petroleum Development on Economic, Environmental and Petroleum Resources", "date": "2018", "keywords": "cost; development; economic; economy; energy; environmental; model; system", "summary": "Introduction The accounting system of national economic account designed by the United Nations Statistics Division (UNSD) has been widely recognized, but the coordinated relations between environmental resources and economic system development hasn\u2019t been included. The establishment of environmental economic account is shown in Fig.2.", "mime": "application/pdf"}, {"id": "cet-9430", "words": "3551", "extension": ".pdf", "flesch": "43", "author": "Zhang, Dandan", "title": "Research on Composite and Electrochemical Properties of Carbon Nanotubes Composites", "date": "2018", "keywords": "carbon; carbon nanotubes; composite; graphene; hydrotalcite; ldh; nanotubes; pcnts; surface", "summary": "Carbon nanotube composite has good electrical conductivity, stability and photoelectron performance. Sodium-ion batteries (SIBs) are the most promising alternative to lithium-ion batteries, which are suitable for DOI: 10.3303/CET1871147 Please cite this article as: Zhang D., 2018, Research on composite and electrochemical properties of carbon nanotubes composites, Chemical Engineering Transactions, 71, 877-882 DOI:10.3303/CET1871147 877 renewable power plants and smart grids.", "mime": "application/pdf"}, {"id": "cet-9431", "words": "3085", "extension": ".pdf", "flesch": "33", "author": "Fan, Caihong; Li, Ping; Xue, Yingzhen", "title": "Application of Differential Equations in Enzyme Kinetics", "date": "2018", "keywords": "chemical; concentration; enzyme; equation; kinetics; method; reaction; system", "summary": "5. Conclusion Complex algebraic expressions are often encountered in the analysis of enzyme kinetics system, even in simple enzyme kinetics system. Weaver et al. developed a conventional differential equation model for the heterologous mevalonate pathway in escherichia coli with kinetic parameters screened from the literature and enzyme concentration derived from selective reaction monitoring mass spectra (srm-ms) (Weaver et al., 2015).", "mime": "application/pdf"}, {"id": "cet-9432", "words": "2997", "extension": ".pdf", "flesch": "38", "author": "Li, Xin", "title": "Preparation, Properties and Application of Polyaniline Nanocomposites", "date": "2018", "keywords": "chemical; fe3o4; fept; method; nanoparticles; pani; polyaniline; preparation; properties; structure", "summary": "ISBN 978-88-95608-68-6; ISSN 2283-9216 Preparation, Properties and Application of Polyaniline Nanocomposites Xin Li Department of Materials Engineering,Inner Mongolia Vocational College of Chemical Engineering, Inner Mongolia 010010,China xinli29001@126.com Based on the design of polyaniline structure, two different types of magnetic nanoparticles/polyaniline composites with electromagnetic absorption properties are prepared using the mechanical blending method based on protonic acid doping. Polyaniline is facilitated by the conversion of functional material phase structural materials, which has a new definition of the range of applications of polyaniline materials.", "mime": "application/pdf"}, {"id": "cet-9433", "words": "3060", "extension": ".pdf", "flesch": "36", "author": "Miao, Aihua", "title": "Application of RFID in Chemical Storage and Logistics Management", "date": "2018", "keywords": "chemicals; information; logistics; management; process; rfid; storage; system; technology; time; transportation", "summary": "According to the object-oriented analysis method, the demand analysis of intelligent monitoring system for hazardous chemicals logistics based on RFID and WSN is carried out, which analyzes the essential use cases of the system, the performance requirements for system design and other requirements. Due to the special nature of hazardous chemicals storage, after years of research and exploration, an RFID technology was developed (Ng et al., 2017).", "mime": "application/pdf"}, {"id": "cet-95", "words": "3842", "extension": ".pdf", "flesch": "46", "author": "Walmsley, T.G.; Atkins, M.J.; Ong, B.H.Y.; Klemes, J.J.; Walmsley, M.R.W.; Varbanov, P.S.", "title": "Total Site Heat Integration of Multi-Effect Evaporators with Vapour Recompression for Older Kraft Mills ", "date": "2017", "keywords": "effect; evaporator; heat; mvr; recompression; site; stage; steam; system; vapour", "summary": "A multi-stage approach to the design of MVR evaporators can help greatly decrease electricity use. Application of conventional MVR evaporators to liquids with a high BPE, which may significantly vary with concentration, is more challenging and less energy efficient.", "mime": "application/pdf"}, {"id": "cet-9552", "words": "3222", "extension": ".htm", "flesch": "47", "author": "Zubir, Muhammad Afiq; Islam Zahran, Muhammad Fakhrul; Shahruddin, Munawar Zaman; Ibrahim, Kamarul Asri ; Abd Hamid, Mohd Kamaruddin", "title": "Economic, Feasibility, and Sustainability Analysis of Energy Efficient Distillation Based Separation Processes", "date": "2019", "keywords": "analysis; column; design; distillation; energy; force; method; stages; study", "summary": "Gani R., Bek-Pedersen E., 2000, Simple new algorithm for distillation column design. Figure 2: PFD of the existing design Table 2: Design variables of existing design Operating Variables T-100 T-101 T-102 T-103 T-104 Ordinary Column Ordinary Column Ordinary Column Ordinary Column Ordinary Column Number of stages 35 46 121 118 172 Feed stage 18 23 61 59 114 Feed (kmol/h) 1,000.0 399.9 200.0 199.9 600.1 Min. reflux ratio 1.1340 1.6845 7.5533 7.4176 33.6833 Reflux ratio (mol) 1.3608 2.0214 9.0640 8.9011 40.4200 Pressure (atm) 2 2 2 2 2", "mime": "application/pdf"}, {"id": "cet-9555", "words": "3711", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-9555", "date": null, "keywords": "biogas; biogenset; cost; diesel; electricity; energy; hybrid; malaysia; myr; oil; palm", "summary": "The finding of this research is purified biogas need a shorter time to heat 500 ml water compare to raw biogas and it has higher calorific value than raw biogas. Table 1 shows the chemical composition of raw biogas.", "mime": "application/pdf"}, {"id": "cet-9556", "words": "3603", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-9556", "date": null, "keywords": "concentration; coolant; freeze; heat; ice; solution; temperature; transfer", "summary": "Therefore, generally the heat from the solution was transferred to the coolant; and as the coolant temperature decreased, the temperature difference between the solution and coolant increased giving higher ice thickness. 3. Result and discussion Effect of operating conditions towards overall heat transfer Generally, coolant temperature, operation time and stirrer speed will affect the overall heat transfer coefficient, which is very closely related to ice thickness (Yahya et al., 2017b).", "mime": "application/pdf"}, {"id": "cet-9557", "words": "4141", "extension": ".pdf", "flesch": "45", "author": null, "title": "cet-9557", "date": null, "keywords": "biomass; catalyst; hydrocarbons; hzsm-5; mass; oil; pyrolysis; ratio; wt%; yield", "summary": "Consequently, the high acidity of HZSM-5 catalyst could promote the formation of coke that deactivates the catalyst and reduce the selectivity of hydrocarbons in pyrolysis oil. Similarly, Vichaphund et al. (2014) claimed that the impregnation of nickel on HZSM-5 had significantly improved the selectivity of hydrocarbons in pyrolysis oil than HZSM-5 catalyst.", "mime": "application/pdf"}, {"id": "cet-9558", "words": "3548", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-9558", "date": null, "keywords": "co2eq; electricity; emission; energy; incineration; production; waste; wte", "summary": "Net CO2eq emission, kg/ tMSW = (CO2eq emission of transportation + CO2eq emission of WtE process) - Avoided CO2eq emission (6) CO2eq emission of transportation is Eq(1), CO2eq emission of WtE process is Eq(2), Avoided CO2eq emission is Eq(3) or Eq(4) or CO2eq emission of transportation, kg/ tMSW = (Fcc x Fef) Dc + (Fct x Fef)", "mime": "application/pdf"}, {"id": "cet-9559", "words": "3265", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-9559", "date": null, "keywords": "adsorption; carbon; phenol; removal; rubber; seed; shell; surface; zaini", "summary": "CHEMICAL ENGINEERING TRANSACTIONS VOL. 72, 2019 A publication of The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Jeng Shiun Lim, Azizul Azri Mustaffa, Nur Nabila Abdul Hamid, Ji\u0159\u00ed Jarom\u00edr Kleme\u0161 Copyright \u00a9 2019, AIDIC Servizi S.r.l. ISBN 978-88-95608-69-3; ISSN 2283-9216 Rubber Seed Shell Based Activated Carbon by Physical Activation for Phenol Removal Koh Zhe Yana, Muhammad Abbas Ahmad Zainib,*, Agus Arsadc, Noor Shawal Nasric aSchool of Chemical & Energy Engineering, Faculty of Engineeringm Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia bCentre of Lipids Engineering & Applied Research (CLEAR), Ibnu-Sina Institute for Scientific & Industrial Research, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia cUTM-MPRC Institute for Oil & Gas, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia abbas@cheme.utm.my This work was aimed at evaluating the characteristics of activated carbons derived from rubber seed shell through physical activation using CO2 for phenol removal. Activated carbons were characterized for specific surface area, surface functional groups and morphology.", "mime": "application/pdf"}, {"id": "cet-9560", "words": "3160", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-9560", "date": null, "keywords": "adsorbent; adsorption; aspirin; concentration; effect", "summary": "The effect of contact time of aspirin adsorption was under the following condition: pH 7, 30\u00b0C, 100 mg/L of aspirin solution, 0.1 g of adsorbent and 150 min. The next set of experiment was conducted to study the effect of pH on aspirin adsorption by adjusting the pH of aspirin solution raging from pH 3 to pH 11.", "mime": "application/pdf"}, {"id": "cet-9561", "words": "3438", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-9561", "date": null, "keywords": "astana; coal; gasification; msw; org; pyrolysis; samples; waste", "summary": "TGA tests revealed that volatile content from Org MSW and RDF begin to be emitted at temperatures above 180-200 \u00b0C. Org MSW and RDF lose all their volatile contents at 500 \u00b0C and 700 \u00b0C.", "mime": "application/pdf"}, {"id": "cet-9562", "words": "3782", "extension": ".pdf", "flesch": "49", "author": null, "title": "cet-9562", "date": null, "keywords": "adsorbent; adsorption; dcw; solution", "summary": "Several parameters such as pH of Pb (II) solution (2 \u2013 6), initial Pb (II) concentration (25 \u2013 200 mg/L) and agitation time (1 \u2013 1,440 min) were conducted in order to study the performance of DCW adsorption towards the Pb (II) removal. This account for 23 % reduction of DCW adsorption capacity.", "mime": "application/pdf"}, {"id": "cet-9563", "words": "3313", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-9563", "date": null, "keywords": "adsorption; hydrogel; nickel; opefb; pva; water; wt%", "summary": "PVA hydrogels are non- carcinogenic, non-toxic and easy to process. One of the interesting characteristics of PVA hydrogels is it has DOI: 10.3303/CET1972030 Paper Received: 30 March 2018; Revised: 03 August 2018; Accepted: 21 November 2018 Please cite this article as: Rafeek M.R., Rabat N.E., Nisa Yahya W.Z., Abdul Ghani M., 2019, Adsorption and desorption of nickel (ii) ion by oil palm empty fruit bunch grafted polyvinyl alcohol hydrogel, Chemical Engineering Transactions, 72, 175-180 DOI:10.3303/CET1972030 175 high degree of swelling when immersed in water while maintaining its elastic and rubbery texture.", "mime": "application/pdf"}, {"id": "cet-9564", "words": "3654", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-9564", "date": null, "keywords": "effluent; malaysia; mbs; nh3; power; removal; stp; system; treatment; wastewater", "summary": "Pmbs = MBS Power consumption (kWh/d), Pr = Power reading (kWh/d), Pac = Power consumption for air- conditioner and fan (kWh/d), Piwk = Existing IWK STP power consumption (kWh/d), Prm = Power reading (kWh/month), T = No. of days (d/month), ES = Energy Saving (%), Piwkd = Existing IWK STP power consumption (kWh/PE\u00b7d), Pmbsd = MBS power consumption (kWh/PE\u00b7d), Piwkd = Existing IWK STP power consumption (kWh/PE\u00b7d). This study designs a novel biological water purification system using a bio- film reactor with encapsulated microbes that is known as Mass Bio System (MBS).", "mime": "application/pdf"}, {"id": "cet-9565", "words": "3380", "extension": ".pdf", "flesch": "47", "author": null, "title": "cet-9565", "date": null, "keywords": "aeration; bioax; land; mbs; process; sewage; stp; tank; treatment; water", "summary": "It also offers the advantages of energy saving, reduced sludge production, maintenance and management, and biological treatment processes over the SBR. This novel STP design is highly recommended for sewage treatment in the reclaimed land and in the highly populated urban area where land is scarce and expensive.", "mime": "application/pdf"}, {"id": "cet-9566", "words": "4352", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-9566", "date": null, "keywords": "emptying; households; management; nigeria; ogun; respondents; reuse; sanitation; sludge; study; waste", "summary": "Similarly, biochar production from faecal wastes presents a clean and renewable alternative approachfor creating value from faecal waste. Furthermore, at p=0.00, knowledge of faecal waste reuse expressed by respondents strongly associated with their choice of faecal waste emptying method.", "mime": "application/pdf"}, {"id": "cet-9567", "words": "3649", "extension": ".pdf", "flesch": "41", "author": null, "title": "cet-9567", "date": null, "keywords": "compound; energy; option; supply; system; treatment; tse; use; water", "summary": "201 Figure 1: Water treatment systems for (a) Option 1 and (b) Option 2 Option 2: Closed loop decentralised water supply system using treated bore water for non-drinking domestic applications and the use of TSE for cooling systems.", "mime": "application/pdf"}, {"id": "cet-9568", "words": "3347", "extension": ".pdf", "flesch": "40", "author": null, "title": "cet-9568", "date": null, "keywords": "carbon; desalination; options; qatar; treatment; tse; use; water", "summary": "DCPs in Lusail city have been designed to use TSE water and potable water. The O&M cost per m3 of water treatment of Options 1 209 and 2 are 0.24 USD and 0.22 USD, while the O&M costs of existing options, such as MSF, SWRO, Hybrid MSF/MFD and hybrid SWRO are 0.26 USD, 0.35 USD, 0.5 USD, 0.23 USD and 0.35 USD (Almar water solution, 2016).", "mime": "application/pdf"}, {"id": "cet-9743", "words": "3361", "extension": ".pdf", "flesch": "53", "author": "Ibiapina, Andreia; Silva De Oliveira, Eduardo Henrique; Da Silva Soares, Camila Mariane; Oliveira De Aguiar, Aynaran; Da Silva, Warley Gramacho; Da Costa Alvim, Tarso; De Melo Filho, Antonio Alves; Souza Martins, Glendara Aparecida", "title": "Mass Transfer Modeling Phenomena at Breakfast Cereal Hydrated with Lactose-free Milk by Artificial Neural Network, Empirical Models and Response Surface", "date": "2019", "keywords": "cereal; hydration; milk; model; process; response; surface; temperature; time", "summary": "References Balbinoti T. C. V., Jorge L. M. M., Jorge R. M. M., 2018, Mathematical modeling of paddy (Oryza sativa) hydration in different thermal conditions assisted by Raman spectroscopy. Fracasso A. F., Perussello C. A., Haminiuk C. W. I., Jorge L. M. M., Jorge R. M. M., 2014, Hydration kinetics of soybeans: Transgenic and conventional cultivars.", "mime": "application/pdf"}, {"id": "cet-9744", "words": "3738", "extension": ".htm", "flesch": "52", "author": "Cascone, Giovanni; Sofia, Daniele; Miccio, Michele; Poletto, Massimo", "title": "A Study on Meat Drying Process Using the Porous Media Approach. Part 1: Experimental", "date": "2019", "keywords": "drying; humidity; meat; moisture; sample; water; weight", "summary": "Water concentration is a distributed parameter: quite often, the assumption of an effective diffusion coefficient De depending on the local water content accounts for water transport inside the sausage (Baldini et al., 2001). So, as input to the model, the data related to experimental drying test were used: 514 Table 4: Code data input with porous media model for the experimental drying conditions Name Value Description Name Value Description T0=Tair=T 303 K Air and meat temperature koswin 10.8e-2 K Oswin constant Xr0 0.75 Initial meat moisture fraction noswin 0.43 n Oswin constant mt 31.997 g Initial meat weight u 0.2 m/s Air velocity Lsample 60 mm Specimen length Duration 3 days Drying time Bsample 22 mm Specimen height", "mime": "application/pdf"}, {"id": "cet-9745", "words": "3787", "extension": ".pdf", "flesch": "35", "author": "Cascone, Giovanni; Miccio, Michele", "title": "A Study on Meat Drying Process Using the Porous Media Approach. Part 2: \u00a0analysis and Mathematical Modeling", "date": "2019", "keywords": "cascone; diffusivity; drying; meat; optimization; parameters; simulation; water", "summary": "So, as input to the model, the data related to experimental drying tests from Cascone et al. (2019) were used: 519 Table 1: Code data input with porous media model for the 1D experimental drying case Name Value Description T0=Tair=T 303 K Air and meat temperature Xr0 0.75 Initial meat moisture fraction mt 31.997 g Initial meat weight Lsample 60 mm Specimen length RH 0.15 Air relative humidity koswin 10.8e-2 K Oswin constant noswin 0.43 n Oswin constant u 0.2 m/s Two semi-empirical correlations for water diffusivity as a function of the local moisture content were selected, i.e., from Saravacos and Datta.", "mime": "application/pdf"}, {"id": "cet-9746", "words": "2891", "extension": ".pdf", "flesch": "45", "author": "Formigoni, Maysa; Zorzenon, Maria; Silva, Sandra; Milani, Paula; Costa, Cecilia; Costa, Silvio", "title": "Characterization of the Permeate Fraction from Nanofiltration Step in Purification Process of Stevia Sweeteners by Uhplc-ms / Ms-qtof", "date": "2019", "keywords": "compounds; food; nanofiltration; purification; stevia; steviol", "summary": "Considering the importance of the nanofiltration step in the processing of stevia leaves in order to obtain stevia extracts of good quality and although the substances removed in this one (permeate and nanofiltration diafiltrates) have not yet been described in the literature, this work had as objective isolate this so-called fraction of permeated fraction (PF), determine its composition by means of UHPLC-MS / MS-QTOF and evaluate its potential as a source of bioactives to be used in food. Current studies are using stevia extracts as feed additives and confirming their potential for preventing lipid oxidation, reducing the growth of mesophilic microorganisms, or even bringing sweetness and functionality to foods (Ortiz-Virdma et al., 2018; Salazar et al., 2018).", "mime": "application/pdf"}, {"id": "cet-9747", "words": "3458", "extension": ".pdf", "flesch": "45", "author": "Fanari, Fabio; Frau, Ilaria; Desogus, Francesco; Scano, Efisio Antonio; Carboni, Gianluca; Grosso, Massimiliano", "title": "Influence of Wheat Varieties, Mixing Time and Water Content on the Rheological Properties of Semolina Doughs", "date": "2019", "keywords": "content; dough; gluten; mixing; properties; semolina; time; water", "summary": "Phan-Thien N., Safari-Ardi M., 1998, Linear viscoelastic properties of flour\u2013water doughs at different water concentrations, Journal of Non-Newtonian Fluid Mechanics, 74(1-3), 137-150. Amemiya J.I., Menjivar J.A., 1992, Comparison of small and large deformation measurements to characterize the rheology of wheat flour doughs, Journal of Food Engineering, 16, 91\u2013108.", "mime": "application/pdf"}, {"id": "cet-9748", "words": "2314", "extension": ".pdf", "flesch": "41", "author": "Erdogdu, Ferruh; Karatas, Ozan; Sarghini, Fabrizio", "title": "Computational Evaluation of Reciprocally Agitated End-over-end (ra-eoe) Processing of Canned Food Products", "date": "2019", "keywords": "agitation; eoe; process; rotation; temperature", "summary": "Rather effective EoE rotation has been demonstrated in computational - experimental studies, and reciprocal agitation process was reported to impose forces up to 3-4 g to enhance the convection mixing. To predict temperature changes and velocity evolution inside the system, a multi-phase model was developed using a finite volume method, based on discretization of governing equations for liquid and gas phases in a non-inertial reference frame of moving mesh, up to 80 rpm rotation and reciprocal agitation rates were used, and the results demonstrated a possible improvement in the temperature increase and uniformity combining the two agitation methods.", "mime": "application/pdf"}, {"id": "cet-9749", "words": "3775", "extension": ".pdf", "flesch": "45", "author": "Salazar-Gonzalez, Claudia; Diaz-Moreno, Consuelo; Fuenmayor, Carlos Alberto", "title": "Extraction of Carotenoids from Bee Pollen Using Sunflower Oil: Evaluation of Time and Matrix-solvent Ratio", "date": "2019", "keywords": "bee; carotenoids; extraction; extracts; oil; pollen; ratios; solvent", "summary": "The increasing trend of carotenoid concentration in the extracts with respect to the matrix concentration indicates that pollen carotenoids are not near to the saturation point in the sunflower oil, even at the highest proportion evaluated. Conclusion Continuous stirring for carotenoid extraction from bee pollen allows for obtaining carotenoid-rich extracts.", "mime": "application/pdf"}, {"id": "cet-9750", "words": "3308", "extension": ".pdf", "flesch": "38", "author": "Gomez, Jose; Castellanos, Diego; Herrera, Anibal", "title": "Modeling Respiration and Transpiration Rate of Minimally Processed Pineapple (ananas Comosus) Depending on Temperature, Gas Concentrations and Geometric Configuration", "date": "2019", "keywords": "pineapple; rates; respiration; slice; temperature; transpiration", "summary": "To estimate respiration rates, two possible models were compared and the most suitable one was chosen: the O2 consumption and CO2 production were modeled by using a Michaelis-Menten enzyme kinetics and by using a first-order kinetics choosing the former. Fonseca, S. C., Oliveira, F. A. R., & Brecht, J. K., (2002), Modelling respiration rate of fresh fruits and vegetables for modified atmosphere packages: a review, Journal of Food Engineering, 52(2), 99\u2013119.", "mime": "application/pdf"}, {"id": "cet-9751", "words": "3118", "extension": ".pdf", "flesch": "48", "author": "Felix, Edikan; Alabi, Sunday; Umo, Aniediong", "title": "A Regression Model for Estimating Sugar Crystal Size in a Fed-batch Vacuum Evaporative Crystalliser", "date": "2019", "keywords": "batch; crystal; crystallisation; model; size; sugar; time", "summary": "Vc Volume fraction of sugar crystals () 0.4 0.5 The model described in Eq(4) for online prediction of sugar crystal growth rate is a function of temperature and super-saturation. Table 2: Upper and lower values of input variables for sugar crystal size model S/N Symbol Variables Lower limit Upper limit 1 T Temperature (oC) 65 75 2 Pvac Vacuum pressure (bar) 0.2 0.3 3 Ff Feed flowrate (m3/s) 0 0.0275 4 Fs Steam flowrate (kg/s) 1.4 2.75 5 S0 Initial super-saturation () 1.15 1.25 6 t Crystallisation time (s) 1200 5400 7 L0 Initial crystal size (microns) 10 12 3.", "mime": "application/pdf"}, {"id": "cet-9752", "words": "3282", "extension": ".pdf", "flesch": "42", "author": "Oliveira Da Silva, Jefferson David; Lima Santos, Debora Eloa; Abud, Ana Karla de Souza; Oliveira Junior, Antonio Matins", "title": "Mathematical Modeling of Convective Drying Acerola (malpighia Emarginata) Residue in Different Thicknesses", "date": "2019", "keywords": "acerola; drying; lewis; midilli; model; page; thicknesses", "summary": "The parameter k values present the same magnitude order for the models studied for each thickness, with exception for Lewis model to high thickness (4 mm, 5 mm and 6 mm). Oliveira Junior A.M., Soares D.S.C., Santos J.T.S., Nunes, T.P., 2016, Evaluation of different drying models for freeze drying of ripe mangabas with different diameters through of performance indicators, Scientia Plena, 12, 1-5; Onwude D.I., Hashim N., Janius R.B., Nawi N.M., Abdan K., 2016, Modeling the thin-layer drying of fruits and vegetables: a review, Comprehensive Reviews in Food Science and Food Safety, 15, 599-618.", "mime": "application/pdf"}, {"id": "cet-9753", "words": "4145", "extension": ".pdf", "flesch": "54", "author": "Cimini, Alessio; Moresi, Mauro", "title": "A Progressive Approach Towards a More Sustainable Food Industry", "date": "2019", "keywords": "cimini; co2e; emissions; energy; food; ghg; impact; kg-1; moresi; pasta; processing; water", "summary": "The environmental impact of food processing The complete supply chain of the food industry from the production of raw materials via food processing to the consumption and disposal by the consumer is quite complex, as schematically sketched in Fig. Air emissions during food processing may contain fine particles, combustion products (CO, CO2, NOX), volatile organic compounds, and in the case of fish by-products unpleasant odorous contaminants, such as H2S, and (CH3)3N (Dieu, 2009).", "mime": "application/pdf"}, {"id": "cet-9754", "words": "2804", "extension": ".pdf", "flesch": "46", "author": "Lima, Ingrid; Martinez, Sabrina; Teixeira, Valeria; Gonzalez, Wilma", "title": "Morphological Analysis by Scanning Electron Microscopy of Dictyota Menstrualis in Natura and Following an Extraction Process", "date": "2019", "keywords": "algae; biomass; chemical; dictyota; edx; extraction; marine; menstrualis; natura; process", "summary": "The aim of this work was to verify the morphology and chemical composition of macroalgae \u2013 Dictyota menstrualis (brown algae), before and after the extraction process with organic solvents using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). DOI: 10.3303/CET1975096 Paper Received: 22 March 2018; Revised: 6 August 2018; Accepted: 20 January 2019 Please cite this article as: Lima I., Martinez S., Teixeira V., Gonzalez W., 2019, Morphological Analysis by Scanning Electron Microscopy of Dictyota Menstrualis in Natura and Following an Extraction Process, Chemical Engineering Transactions, 75, 571-576 DOI:10.3303/CET1975096 571 However, several articles have reported on the morphology of macroalgae biomasses in natura compared to macroalgae submitted to different treatments.", "mime": "application/pdf"}, {"id": "cet-9755", "words": "3576", "extension": ".pdf", "flesch": "54", "author": "Pang, Lei; Ma, Ran; Hu, Shoutao; Lv, Pengfei; Yang, Kai", "title": "Influence of Local Accumulation of Polyethylene Dust Cloud on Flame Propagation", "date": "2019", "keywords": "cloud; distribution; dust; flame; propagation; range; speed; tube", "summary": "Conclusions In order to provide scientific basis for the effective control of PE dust explosion in the initial stage of accident, tests were made to study the influence of different initial distribution ranges of dust clouds in semi-open tubes on flame propagation, reaching the following conclusions: (1) Flame propagation scope generally exceeds the initial distribution range of dust cloud. When dust cloud distribution range was 0.16 m, dust distribution was most centralized, flame was bright in the whole propagation process and flame front surface was always smooth; however, the total flame propagation distance was only 0.2 m as dust cloud scope was small and flame acceleration was stable.", "mime": "application/pdf"}, {"id": "cet-9874", "words": "2843", "extension": ".htm", "flesch": "49", "author": "Andoglu, Ecem Muge; Dell'Angelo, Anna; Ranzi, Eliseo; Kaytakoglu, Suleyman; Manenti, Flavio", "title": "Reduced and Detailed Kinetic Models Comparison for Thermal Furnace of Sulfur Recovery Units", "date": "2019", "keywords": "claus; furnace; kinetic; model; process; reaction; sulfur", "summary": "Zarei S., 2018, A modified kinetic reaction scheme for Claus reaction furnaces in oil refineries, Innovative Energy&Research, 7(3):215, 1-9. 654 Pahlavan M., Fanaei M. A., 2016, Modeling and simulation of Claus unit reaction furnace, Iranian Journal of Oil & Gas Science and Technology, 5, 42-52.", "mime": "application/pdf"}, {"id": "cet-9875", "words": "3135", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-9875", "date": null, "keywords": "co2; cost; gas; methanol; reactor; reforming; tri", "summary": "Figure 1: Schematic diagram of bi or tri-reforming based methanol process 3. However, only captured CO2 from flue gases by absorption or other technologies is utilized as an input to methanol processes in this paper.", "mime": "application/pdf"}, {"id": "cet-9876", "words": "3793", "extension": ".pdf", "flesch": "44", "author": null, "title": "cet-9876", "date": null, "keywords": "coldfinger; gas; purity; section; teg; temperature; vapor; water", "summary": "Finally, TEG purity increases up to a point where it shows an asymptotic trend, meaning that additional heat removal is not effective in further improving TEG regeneration. Coldfinger is a TEG regeneration technology reported to be capable of increasing TEG purity to levels above 99.8 wt.%, but conceptual models of this equipment appear to be lacking.", "mime": "application/pdf"}, {"id": "cet-9877", "words": "2798", "extension": ".pdf", "flesch": "55", "author": null, "title": "cet-9877", "date": null, "keywords": "figure; flash; level; operation; set; state", "summary": "Figure 5: Final target of flash startup operation. Figure 11: Simulation results of SFC-1 in flash startup operations.", "mime": "application/pdf"}, {"id": "cet-9878", "words": "3104", "extension": ".pdf", "flesch": "51", "author": null, "title": "cet-9878", "date": null, "keywords": "ammonia; aspen; composition; plant; process; safety; temperature", "summary": "Simulation Results (Design Case) Simulation Results (Present Case) DGR inlet temperature 390oC 390oC 390oC DGR outlet temperature/ PRF inlet temperature 380oC 370oC 370oC PRF inlet temperature 380oC 380oC 380oC PRF outlet temperature/ SRF inlet temperature 809oC 810oC 811 SRF outlet temperature 939oC 957oC 962 SRF CH4 gas composition 0.3% 0.8438% 0.748% SRF CO gas composition 13% 12.94% 12.84% HTS inlet temperature 350oC 350oC 350oC HTS outlet temperature 416oC 423oC 423oC HTS CO gas composition 3% 2.99% 2.91% LTS inlet temperature 207oC 207oC 207oC LTS outlet temperature 225oC 225oC 225oC LTS CO gas composition 0.3% 0.29% 0.279% Methanator inlet temperature 320oC 320oC 320oC Methanator outlet temperature 351oC 351oC 351oC Methanator composition 0%CO and 0%CO2, 0.96% CH4 0%CO and 0%CO2, 0.0.88% CH4 Inlet gas H2/N2 ratio ammonia converter 2.78 2.74 Ammonia recycled from separator (Assumed) 16.24% 16.24% Ammonia converter inlet temperature 313.7oC 313.7oC 313.7oC Ammonia converter outlet temperature 370oC 370oC 370oC Ammonia converter NH3 composition 40.34% NH3 40.53% 676 Table 3: Comparisons of different plant production scenarios due to different NG composition (Jahngir,2000) Composition ZFCL CUFL PUFF NGFF PRF inlet SRF outlet PRF inlet SRF outlet PRF inlet SRF outlet PRF inlet SRF outlet CH4 98.24% 0.3 90.64 0.25 99.5 0.3 95 0.7 C2H6 1.44 0 3.26 0 0 0 3.1 0 C3H8 0.01 0 0.77 0 0 0 0.7 0 C4H10 0 0 0.57 0 0 0 0.2 0 Figure 1: AFCCL ammonia process plant within Aspen Plus 2.1 Process description Raw materials for the AFCL ammonia plant are natural gas, process air and H2O. NG from Titas and Hobgonj is passed through a knockout drum, filtration unit pre-heater and divides into two steams- fuel and process NG.", "mime": "application/pdf"}, {"id": "cet-9879", "words": "3192", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-9879", "date": null, "keywords": "bioethanol; column; control; ethanol; input; process", "summary": "As control inputs, reflux ratio (RR) and reboiler duty (QR) are considered for every column, and entrainer input flow is additionally considered for the dehydration column. In addition, if there is more than one choice of control input, and more than one control output, the matter turns into which control input would make the lesser effort to drive any control output, and the control input-control output pairing becomes in a combinatorial problem.", "mime": "application/pdf"}, {"id": "cet-9880", "words": "2891", "extension": ".pdf", "flesch": "46", "author": null, "title": "cet-9880", "date": null, "keywords": "area; flux; fouling; membrane; ochando; stoller", "summary": "In other words, membrane fouling, even in its reversible form, will lead to a reduction of the permeability of the membrane, and this aspect needs to be compensated by an additional amount of membrane area which has the objective to host the fouling (Vrijenhoek et al, 2001) Introduction One of main drawback of membrane technologies is membrane fouling, which significantly reduces the membrane performances in a short amount of time.", "mime": "application/pdf"}, {"id": "cet-9881", "words": "3084", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-9881", "date": null, "keywords": "framework; image; infrared; monitoring; network; photos; process; segmentation; temperature; tube", "summary": "692 2.2 Image Segmentation Models Before the raise of DL approaches, image segmentation methods were mainly based on hand-crafted features combined with simple classifiers (J. Shotton, 2009; Z. Tu, 2010; B. Fulkerson, 2009). Esteva A, Kuprel B, Novoa RA, Ko J, Swetter SM, Blau HM, et al., 2017, Dermatologist-level classification of skin cancer with deep neural networks, Nature;542(7639):115.", "mime": "application/pdf"}, {"id": "cet-9882", "words": "2871", "extension": ".pdf", "flesch": "39", "author": null, "title": "cet-9882", "date": null, "keywords": "benefit; cost; iec; investments; plant; safety; sif; sil", "summary": "Experience shows that it is sometimes difficult to see the benefits of major investments in Process Safety, because they are related to a reduction of the costs of an accident (fewer lost lives, less damaged equipment, smaller clean up), as opposed to increased production margins. The analysis stemmed from a previous extensive assessment of Safety Integrity Level across all Sites of the Company, which is resumed in the following Chapter.", "mime": "application/pdf"}, {"id": "cet-9883", "words": "2600", "extension": ".pdf", "flesch": "36", "author": null, "title": "cet-9883", "date": null, "keywords": "analysis; column; design; dynamic; flexibility; process; state; variables", "summary": "Results show indeed that process design based on steady state flexibility analysis considerably underestimates the optimal sizing required by the equipment extending this way the transient to elapse in order to restore the desired specifications, causing a corresponding off-spec production and a subsequent profit loss. On the other hand, if dynamic flexibility analysis is performed during the design phase, the engineer can decide, according to the perturbations likelihood, how much oversizing (that is additional costs) should be considered in order to avoid the risk of non-operable system under perturbated conditions.", "mime": "application/pdf"}, {"id": "cet-9884", "words": "3519", "extension": ".pdf", "flesch": "52", "author": null, "title": "cet-9884", "date": null, "keywords": "algorithms; carnero; case; hsa_sots; process; search; sndp; solution; variables", "summary": "Furthermore, S\u03c3 and SE are the set of key process variables with requirements in precision and ability to be estimated, respectively: { } k As a consequence, the standard error, SE, for HSA_SOTS is zero in these experiences, which demonstrates an excellent ability of the method to replicate good solutions in each run.", "mime": "application/pdf"}, {"id": "cet-9885", "words": "2315", "extension": ".pdf", "flesch": "53", "author": null, "title": "cet-9885", "date": null, "keywords": "bender; equation; state", "summary": "With respect to PR Equation of State, Bender model exhibit more stability near the critical point due to special nonlinear fitting and regression performed in this region by Bender in order to a very robust response of his Equation of State. ISBN 978-88-95608-71-6; ISSN 2283-9216 Smart Implementation of Bender Equation of State Filippo Bisottia, Alessandro di Pretoroa,b, Anna Dell\u2019Angeloa, Daniele Previtalia, Andre Furtado Amarala, Ecem Muge Andogluc, Flavio Manentia,* a Dipartimento CMIC \u201cGiulio Natta\u201d, Politecnico di Milano, Piazza Leonardo da Vinci, 32, 20133, Milan, Italy b Laboratoire de G\u00e9nie Chimique, Universit\u00e9 de Toulouse, CNRS/INP/UPS, Toulouse, France c Chemical Engineering Department, Bilecik Seyh Edebali University, G\u00fcl\u00fcmbe, 11230, Bilecik, Turkey flavio.manenti@polimi.it In this paper matrix and vector products are exploited to reformulate Bender Equation of State.", "mime": "application/pdf"}, {"id": "cet-9886", "words": "3233", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-9886", "date": null, "keywords": "case; data; detection; measurement; problem; reconciliation; results", "summary": "Classic Data Reconciliation typically assumes that measurement errors follow the normal distribution. Nac. de la Plata, 1900 La Plata, Argentina msanchez@plapiqui.edu.ar State estimation and detection of measurement systematic errors are critical components of plant monitoring and control procedures.", "mime": "application/pdf"}, {"id": "cet-9887", "words": "3293", "extension": ".pdf", "flesch": "57", "author": null, "title": "cet-9887", "date": null, "keywords": "butane; feedstock; flow; process; splitter", "summary": "Process flow diagram for the present study (created using Aspen Plus V10) 2.2 Validation of the simulation model Before attempting any optimisation, we first validated the simulation model, by simulating the target process using the design data. Distillation processes are highly energy- intensive processes that account for about 40% of the energy consumed by the chemical industry.", "mime": "application/pdf"}, {"id": "cet-9888", "words": "3301", "extension": ".pdf", "flesch": "42", "author": null, "title": "cet-9888", "date": null, "keywords": "1,2; acetaldehyde; acid; bar; distillation; pdo; reactive", "summary": "Nonetheless, the need for complex separation steps makes the lactic 736 acid-based biorefinery very challenging, both in terms of lactic acid production and its transformation to other materials (Dusselier et al., 2013). Therefore, if 1,2-PDO were produced directly from dilute, lower purity lactic acid, as proposed by Binczarski et al. (2016), who treated lactate from sugar beet pulp fermentation broth through adsorption on activated carbon to be converted into 1,2-PDO over Ru catalyst, achieving high yield (87.7 mol %).", "mime": "application/pdf"}]