CHEMICAL ENGINEERING TRANSACTIONS
VOL. 72, 2019
A publication of
The Italian Association
of Chemical Engineering
Online at www.aidic.it/cet
Guest Editors: Jeng Shiun Lim, Azizul Azri Mustaffa, Nur Nabila Abdul Hamid, Jiří Jaromír Klemeš
Copyright © 2019, AIDIC Servizi S.r.l.
ISBN 978-88-95608-69-3; ISSN 2283-9216
Techno-economic and Environmental Implications of the Use
of a Closed Loop Water Recycling System in Qatar
Wahidul K. Biswasa,*, Yousef Al Horrb, Cynthia A. Jollc, Michele Rosanoa
aSustainable Engineering Group, School of Civil and Mechanical Engineering, Curtin University, Western Australia
bGulf Organization for Research and Development, Qatar Science and Technology Park, Doha
cCurtin Water Quality Research Centre, School of Molecular and Life Sciences, Curtin University, Western Australia
w.biswas@curtin.edu.au
This paper presents the environmental and economic benefits from the use of potable water from a desalination
plant, and treated sewage effluent (TSE) for non-potable reuse, in Lusail, Doha. This newly built city plans to
use TSE for a large portion (98 %) of its non-domestic applications instead of discharging TSE to the ocean. It
was estimated that about 140,112 m3/d desalinated water will be produced for potable water supply and 93,236
m3/day of TSE will be produced from a sewage treatment plant (STP) for use in district cooling systems and in
the irrigation of local landscapes, lawns, and pocket gardens. Less than 2.5 % of water demand for non-domestic
applications (i.e. irrigation of lawns for water features) will need to be met by potable water. There are significant
sustainability benefits associated with the use of TSE in a water scarce and fast growing region like Qatar. A
life cycle assessment analysis has been carried out to determine the greenhouse gas emissions, embodied
energy consumption and cost savings associated with the recycling of wastewater in Lusail.
1. Introduction
Per capita, Qatar is among the highest water consumers in the world, however, fresh water resources are limited
(Ismail, 2015). The nation is currently experiencing significant challenges in meeting the demand for water, as
a result of its population growth, rapid urban development, dwindling natural resources, increasing industrial
development and climate change issues. The current water consumption per capita is 500 L/d, which is the
highest in the world (Baalousha and Ouda, 2017). Desalinated seawater is the main source of potable water
(99 %) in Qatar. Interestingly, Qatar has an abundance of energy reserves, but it has limited water resources.
In the future, Qatar’s water demand will increase energy consumption significantly (Malki, 2015), along with
increasing GHG emissions. Total water production in Qatar from desalination, fresh groundwater abstraction
and the re-use of treated sewage effluent (TSE) rose from 220 Mm3 in 1990 to 841 Mm3 in 2014 (Ministry of
Development Planning and Statistics, 2015). TSE has been used in landscaping and irrigation applications for
many years. This effluent is now considered for use in Qatar’s district cooling systems. The Qatari Water
Resources Committee (PWRC) in 2014 banned the usage of potable water for cooling purposes. It is estimated
that these industries will consume nearly 73 Mm3 of TSE which represents 17 % of total TSE demand by 2020
(Jasim et al., 2016). Using TSE as an alternative to potable water in district cooling plants (DCP) will serve
nearly 39 Mm3/y of potable water by 2023 (Jasim et al., 2016).
DCPs in Lusail city have been designed to use TSE water and potable water. Lusail is a city of 38 km2, and is
able to accommodate 200,000 residents, 170,000 employees and 80,000 visitors (Industry ME, 2016).Some
recent studies which were conducted in Australia and Europe focused on the use of recycled wastewater
(Laurenson et al. 2012), where this wastewater can potentially be used by other applications such as industrial
cooling and landscape irrigation purpose (Grant et al. 2012). Lusail city has been considered as a case study in
this research project as it is a new city with potential to develop innovative and environmentally friendly water
supply options. Lusail city is also close to the ocean allowing desalination of water for domestic purposes. Both
TSE and seawater treatment are energy intensive, resulting in a large amount of greenhouse gas (GHG)
emissions and other environmental impacts (Samanaseh et al. 2017). Therefore, in the current paper, a LCA
analysis has been done to determine the impact on global warming (or GHG emissions) of both energy-intensive
DOI: 10.3303/CET1972035
Paper Received: 30 March 2018; Revised: 26 August 2018; Accepted: 15 December 2018
Please cite this article as: Biswas W.K., Horr Y.A., Joll C., Rosano M., 2019, Techno-economic and environmental implications of the use of a
closed loop water recycling system in qatar, Chemical Engineering Transactions, 72, 205-210 DOI:10.3303/CET1972035
205
wastewater treatment systems. The environmental performance of MSF and MED was compared with seawater
reverse osmosis desalination (Darwish et al., 2013), to assess the lifecycle environmental impact of renewable-
powered reverse osmosis systems for enhancing food security (Al-Ansari et al., 2014), and to assess the
economic viability of wind energy systems (Marafia et al., 2003) in Qatar. This paper reports an assessment of
the environmental and economic implications of two water treatment technologies, where potable water is
sourced from an on-site desalination plant and TSE is used in DCPs.
2. Methodology
2.1 Water quality
Since seawater quality data from the Lusail area was not available, water quality data from the desalination
plants at Ras Abu Fontas, Qatar has been considered for designing the desalination plant to produce potable
water. According to Abdel-Wahab (pers. comm. Chemical Engineering Program, Texas A & M University at
Qatar), seawater quality does not vary much across Doha. Table 1 shows the water quality data from Ras Abu
Fontas, Qatar, provided by the Gulf Organization for Research and Development (GORD).
Table 1: Seawater analysis of Ras Abu Fontas Desalination plants RAF B and RAF A1 in Qatar
Parameter RAF B RAF A 1
pH 8.17 8.19
Conductivity (mS cm-1) 63,200 63,300
TDS (mg L-1) 44,750 44,945
Total hardness (mg L-1) 7,880 7,900
Calcium hardness (mg L-1) 1,150 1,160
Magnesium hardness (mg L-1) 6,730 6,740
Calcium (mg L-1) 460 464
Magnesium (mg L-1) 1,615 1,618
Total alkalinity (mg L-1) 125 126
Sulphate (mg L-1) 3,200 3,220
Sodium (mg L-1) 12,200 12,300
Ammonia (mg L-1) 0.40 0.40
Bromide (mg L-1) 74 75
Chloride (mg L-1) 24,800 24,900
Copper (mg L-1) 5.0 5.0
Iron (mg L-1) 20 22
Silica (mg L-1) 0.8 0.8
Turbidity (NTU) 2.5 3.0
Suspended solids (mg L-1) 8.0 8.5
Bicarbonate (mg L-1) 153 154
2.2 Water treatment options
The cost elements for the desalination process are based upon a pre-treatment system using dissolved air
flotation and media filtration. Filtrate from this process is subjected to desalination by a seawater reverse
osmosis system. The permeate is then remineralised using lime and carbon dioxide. The energy of the reverse
osmosis process was derived from standard membrane design software using the seawater analysis given in
Table 1. The chemical consumption is based upon the quantities given in Table 3 on the basis of producing
1000 m3 of potable water. The chemicals and energy consumption for wastewater treatment was based on
Jasim et al. (2016) and the consultation with a local expert (Hazim Qiblawey, Qatar University). The cost
elements for the wastewater treatment process utilising activated sludge, ultrafiltration and reverse osmosis
were based upon standard operating values for treatment of secondary effluent by membrane processes. The
chemical consumption is based upon the quantities given in Table 3 on the basis of producing 1000 m3 of
recycled water. Figure 1 shows the current water balance in Lusail, Qatar. About 140.1 kL/d of potable water
will be supplied to the city for domestic drinking and non-drinking applications and to public places. The volume
of wastewater that is generated from these end uses accounts for 75 % of the amount of potable water supply.
This wastewater will be treated to produce TSE for landscape irrigation and district cooling system applications.
DCP will use 50 % of this TSE as cooling water. In an additional scenario, 100 % of the water in the DCPs is
TSE and the remaining TSE (17,338 m3/d) is considered for landscape irrigation applications. Qatar Cool (a
Qatari DCP) suggested that a reverse osmosis system has to be designed along with the DCP to maintain the
TSE supply quality and to meet the authorities’ compliance discharge requirements. The TSE has to go through
206
an advanced water treatment system (i.e. using ultrafiltration and reverse osmosis) to reduce the concentration
of TSE, to increase the cycle of concentration and to avoid the use of makeup water coming from the
desalination plant (Figure 2). The reject brine is then directly discharged to ocean. These two options are now
considered as Options 1 and 2 as shown in Table 2.
Figure 1: Water balance of Lusail city, Qatar (Al-Ishaq, 2018)
Figure 2: Treatment of TSE for cooling system application (Al-Mutawah, 2015)
Table 2: Design considerations for Options 1 and 2
Option 1 Option 2
97.5 % potable water supplied from a desalination
plant for domestic purposes
2.5 % potable water for water features and lawns
50 % of DCP water is TSE
50 % of TSE is used for landscape irrigation
97.5 % potable water supplied from a desalination
plant for domestic purposes
2.5 % potable water for water features and lawns
100 % of DCP water is TSE
20 % of TSE will be used for landscape irrigation
Blowdown water will be used for landscape irrigation
207
2.3 Carbon footprint assessment
The inputs required for producing 1000 m3 desalinated water per day and treating 1000 m3 wastewater per day
have been presented in Table 2 as a life cycle inventory (LCI). LCI is a pre-requisite in determining the carbon
footprint of any product or service. The input data is then incorporated into LCA software to calculate both the
carbon footprint of 1000 m3 potable water per day and to calculate the carbon footprint associated with the
treatment of 1000 m3 wastewater per day. In order to calculate these carbon footprints, the input/output data of
the LCI will be linked to relevant emission databases in Simapro 8.4. The inputs are then multiplied by the
corresponding emission factors to calculate the impacts. The values for the impact of global warming can be
calculated over time horizons of 20, 100 and 500 y, in order to make relevant climate change decisions. In this
current research, the 100 y horizon has been considered in the carbon footprint calculation, as it is typically a
reference point for policy makers. According to the IPCC data on global warming potential factors, at 100 y, CO2
has a factor of one, CH4 a factor of 28 and N2O a factor of 265 (IPCC 2007).
Table 3: Life cycle inventory of desalination and wastewater treatment
Values Units USD
DESALINATION
Chemicals
Anti-scalant 2.4 L/d 12.9
98 % Sulphuric Acid 79.28 kg/d 82.8
42 % ferric chloride 47.74 kg/d 23.9
Polyelectrolyte 1.25 kg/d 3.8
Lime* 40 kg/d 4.8
Carbon dioxide 10 kg/d 50.0
Chlorine 2 kg/d 7.8
Specific Energy Consumption
Desalination plant 3.4 kWh/m3 28.0
Drinking water pumping 0.3 kWh/m3 2.5
RO membranes
Number 86 elements 63.6
Life 6 y 0.0
WASTEWATER TREATMENT
Production 1000 m3/d TSE
Chemicals
Anti-scalant 2.2 L/d 11.8
10% Sodium hypochlorite 7.3 L/d 6.6
40% sodium bisulphite 2.7 L/d 0.9
Specific Energy Consumption
Overall plant 1.2
kWh/m3 of
TSE 9.9
TSE pumping 0.3 kWh/m3 2.5
RO membranes
Number 80 elements 59.2
Life 6 y 0.0
UF Membranes for TSE
Membrane area in m2 1389 m2 20.8
Replacement time 6 y
Based on the estimated carbon footprint of 1000 m3/d of potable water and TSE 1000 m3/d of treated
wastewater, the carbon footprint of these two options was then estimated.
2.4 Operation and maintenance costs
Using the same LCI of LCA, the operation and maintenance (O&M) costs of delivering water for domestic and
cooling applications in USD/m3 are then determined. The capital costs for treatment technologies have been
excluded from the analysis. Only the labour costs associated with the water delivery are included.
208
3. Results and discussion
Options 1 and 2 were compared from environmental and economic perspectives. 50 and 100 % of the TSE are
used as cooling water for DCP in Options 1 and 2. The use of TSE not only reduces the water footprint from
220 to 143 kL/d, it also reduces the carbon footprint in terms of t CO2/d. Option 2 produces less carbon footprint
(162 t of CO2/d) than Option 1 (178 t of CO2/d) due to the fact that the former used TSE as make up water
instead of potable water produced in a desalination plant (Table 4). If potable water would have been considered
for both domestic and cooling applications, it is estimated that 268 t of CO2/d would have been emitted. However,
the use of TSE in the cooling system of Options 1 and 2 further reduces GHG emissions by 34 % and 40 %.
Table 4: Carbon footprint (t CO2/d) analysis of Options 1 and 2
Chemicals Membranes Electricity Total
Option 1
Potable Water 9 7 118 134
Treated TSE for DCP 0 1 16 17
Make up water for DCP 2 1 24 27
Total 11 9 158 178
(6 %) (5 %) (89 %) (100 %)
Option 2
Potable water 9 7 118 134
TSE for DCP 1 2 25 27
Total 9 9 144 162
(6 %) (5 %) (89 %) (100 %)
For both Options 1 and 2, electricity use accounted for a significant portion of the total GHG emissions or carbon
footprint (i.e. 89 %) mainly due to the fact that the electricity is generated from a natural gas fired combined
cycle power plant. In coastal Doha, the use of photovoltaic technologies and wind energy can be considered as
a replacement for fossil fuel generated electricity. Additional mitigation strategies can also be considered to
reduce the overall carbon footprint of water production. Firstly, instead of sending brine to the sea, it can be
used to remove moisture from the air in the first stage of a desiccant cooling process, thereby decreasing the
use of carbon intensive refrigerants (Lychnos et al., 2012). Secondly, brine can also potentially be used in the
cement industry (Fattah et al., 2015).
Table 5: Comparison of carbon footprint and total electrical energy consumption between proposed and
existing options
Carbon footprint (kg CO2/m3) Total electrical energy (kWh/m3)
Proposed options
Option 1 0.82 3.5
Option 2 0.74 2.9
Existing options (*)
Multi-effect distillation (MED) 0.3 – 26.9 6.0 – 10
Multi-stage flash (MSF) distillation 0.3 – 34.7 13.5 – 23.5
Seawater desalination - RO 0.08 – 4.3 4 - 4.5
(*) These options are currently used in Doha for water treatment purposes.
The environmental performance of closed loop water supply Options 1 and 2 was compared with existing water
treatment options in the Gulf region. Table 5 shows that Option 2 generates less carbon footprint, as well as
consumes less electricity, during the treatment process compared to existing treatment options. This is due to
the avoidance of pumping energy that is required for distributing water in a centralized water distribution network.
In the case of Lusail, desalination is performed onsite, reducing the pumping energy required for distribution.
The desalination options in the current research and other studies consume less electricity than MED and MSF
plants. The same inputs that were used to calculate the carbon footprint were used in calculations of the daily
operation and maintenance cost of Options 1 and 2. Option 2 was found to have lower operation and
maintenance (O&M) cost (USD 5,068 per day) than Option 2 (8,483 USD/d).
In order to compare with the currently available options, the units O&M costs are converted from per day to per
m3. Interestingly, the O&M costs of water per m3 for these two options is almost the same as the O&M costs of
the existing water treatment options in the Gulf region. The O&M cost per m3 of water treatment of Options 1
209
and 2 are 0.24 USD and 0.22 USD, while the O&M costs of existing options, such as MSF, SWRO, Hybrid
MSF/MFD and hybrid SWRO are 0.26 USD, 0.35 USD, 0.5 USD, 0.23 USD and 0.35 USD (Almar water solution,
2016). Efforts to improve water productivity through wastewater reuse will still need to overcome economic,
planning, regulatory, institutional, and public acceptance challenges (Grant et al. 2012).
4. Conclusions
The use of TSE as a replacement for potable water in a district cooling plant could significantly reduce the overall
carbon footprint (34-40 %) of this closed loop decentralised water supply system. Further carbon footprint
reduction could be possible by using electricity sourced from renewable energy technologies like solar and wind.
Option 1 utilising 50 % of TSE in DCP and Option 2 utilising 100 % of TSE in DCP have both been found to be
more environmentally friendly and more cost-competitive than the existing MED and MSF plants. In order to
respond to Qatar’s growing water demand pressures, Options 1 and 2 could deliver water at more competitive
prices with less environmental impact. These options could also reduce electricity consumption significantly,
conserving Qatar’s natural gas resources whilst reducing GHG emissions.
Acknowledgments
This research was proudly supported by the Qatar National Research Foundation NPRP9-418-2-168. We
acknowledge Mr. Abdulrahman A. Al Ishaq (Qatari Diar Real Estate Investment Company, Lusail), Prof. Hazim
Qiblawey (Department of Chemical Engineering, Qatar University), Mr. Tanveer A. Tarapathi (Qatar Cool), Dr.
Ammar Elhoweris and Ms. Reem Hayek (GORD) and Dr. Altaf Hussain (Conoco Phillips Global Water
Sustainability Centre, Qatar), for providing information. Dr. Gavin Broom is thanked for his contribution in
treatment system design.
References
Al-Ansari T., Korre A., Shah N., 2016, Integrated Modelling of the energy, water and food nexus to enhance the
environmental performance of food production systems, 9th International Conference LCA of Food, 8-10
October, San Francisco, United States.
Al-Ishaq, 2018, TSE production and use, Qatari Diar Real Estate Investment Company, Lusail, Doha, Qatar
Al-Mutawah N., 2015, Qatar District Cooling Company TSE Migration, Qatar Cool, Doha, Qatar
Baalousha S.M., Ouda O.K.M., 2017, Domestic water demand challenges in Qatar, Arabian Journal of
Geosciences, 10(537), 1-12.
Oraby W., 2012, Arid Nation the Qatar Water Industries’ Strategic Plan, The Edge, 62-66.
accessed 01.09.2016
Darwish M., Hassabou A.K., Shomar B., 2016, using seawater reverse osmosis (SWRO) desalting system for
less environmental impacts in Qatar, Desalination, 609, 116-126
Grant S.B., Saphores J.D., Feldman D.L., Hamilton A.J., Fletcher T.D., Cook P.L., Stewardson M., Sanders
B.F., Levin L.A., Ambrose R.F., Deletic A., Brown R., Jiang S.C., Rosso D., Cooper W.J., Marusic I., 2012,
Taking the “waste” out of “wastewater” for human water security and ecosystem sustainability, Science,
337(6095), 681-686.
Industry ME, 2016, Lusail city: bringing Qatari imagination to life, accessed 6.06.2018.
IPCC (Intergovernment Panel on Climate Change) 2007, Direct Global Warming Potentials. IPCC Switzerland.
accessed 30.05.2018.
Ismail H., 2015, Food and Water Security in Qatar: Part 2 – Water Resources, Future Directions International
Pty Ltd, Dalkeith WA, Australia.
Jasim S.Y., Saththasivam J., Loganathan K., Ogunbiyi O., Sarp S., 2016, Reuse of Treated Sewage Effluent
(TSE), Qatar Journal of Water Process Engineering, 11, 174-182.
Laurenson S., Bolan N.S., Smith E., McCarthy M., 2012, Review: Use of recycled wastewater for irrigating
grapevines, Australian Journal of Grape and Wine Research, 18, 1–10.
Malki A S. A, 2015, Business Opportunities in Water Industry in Qatar, Qatar General Electricity and Water
Corporation (KARAMA), Ministry of Development Planning and Statistics, Doha, Qatar.
Samanaseh V., Noor Z.Z., Hassan C.H.C., Sabeen A.H., 2017, Water-energy-nexus in water supply: a case
study on greenhouse gases emissions trends of a water utility company in Johor, Malaysia, Chemical
Engineering Transactions, 56, 1711-1716.
Jasim S.Y., Saththasivam J., Loganathan K., Ogunbiyi O.O., Sarp S., 2016, Reuse of Treated Sewage Effluent
(TSE) in Qatar, Journal of Water Process Engineering, 11, 174–182.
210
https://www.ncbi.nlm.nih.gov/pubmed/?term=Grant%20SB%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Saphores%20JD%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Feldman%20DL%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Hamilton%20AJ%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Fletcher%20TD%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Cook%20PL%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Stewardson%20M%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Sanders%20BF%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Sanders%20BF%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Levin%20LA%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Ambrose%20RF%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Deletic%20A%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Brown%20R%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Jiang%20SC%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Rosso%20D%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Cooper%20WJ%5BAuthor%5D&cauthor=true&cauthor_uid=22879506
https://www.ncbi.nlm.nih.gov/pubmed/?term=Marusic%20I%5BAuthor%5D&cauthor=true&cauthor_uid=22879506