id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
fumecheng-4893	Leksycki, Kamil; Feldshtein, Eugene; Ociepa, Michał	ON THE EFFECT OF THE SIDE FLOW OF 316L STAINLESS STEEL IN THE FINISH TURNING PROCESS UNDER DRY CONDITIONS	2021	9	.pdf	application/pdf	3237	184	62	In the zone of an intense plastic side flow (red color) for higher cutting speeds and lower feed rates an irregular distribution of single burrs and a few clear areas of the 340 K. LEKSYCKI, E. FELDSHTEIN, M. OCIEPA flowing material were observed, whereas within the range of medium cutting speeds and lower feed rates side flow was regular on the whole length of the machined surface. As stated in Grzesik [17], the phenomenon of side flow can also be caused by the outflow of the material plasticized under high temperatures and high pressure values generated in the cutting zone and caused by a worn out cutting wedge.	cache/fumecheng-4893.pdf	txt/fumecheng-4893.txt