id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
fumecheng-6941	Haque, Rafiqul; Sekh, Mukandar; Kibria, Golam; Haidar, Shamim	IMPROVEMENT OF SURFACE QUALITY OF Ti-6Al-4V ALLOY BY POWDER MIXED ELECTRICAL DISCHARGE MACHINING USING COPPER POWDER	2023	17	.pdf	application/pdf	6456	338	59	(e) The optimal value of machining process parameters of peak current (Ip), pulse on time (Ton), pulse off time (Toff) and powder concentration (Cp) are 7 A, 10 µs, 30 µs and 4 g/l, respectively, for this copper powder mixed electrical discharge machining process. The EDM process improvement may be further enhanced by incorporating the convenient modifications like mixing the electrically conductive powder materials in the dielectric fluid medium which is called powder mixed EDM (PMEDM).	cache/fumecheng-6941.pdf	txt/fumecheng-6941.txt