item: #1 of 526
          id: fumecheng-100
      author: Milić, Predrag; Marinković, Dragan
       title: ISOGEOMETRIC STRUCTURAL ANALYSIS BASED ON NURBS SHAPE FUNCTIONS
        date: 2014
       words: 3616
      flesch: 59
     summary: The geometric models and, consequently, the FEM models, differ in the degree of NURBS basic functions and definitions of knot vec- tors. The algorithm of the isogeometric analysis using NURBS shape functions For the example discussed in this paper, the assumption of linearly elastic, homogene- ous, isotropic material has been adopted.
    keywords: analysis; element; fem; fig; functions; geometry; model; nurbs
       cache: fumecheng-100.pdf
  plain text: fumecheng-100.txt

        item: #2 of 526
          id: fumecheng-1003
      author: Mišić, Dragan; Manić, Miodrag; Vitković, Nikola; Korunović, Nikola
       title: TOWARD AN INTEGRATED INFORMATION SYSTEM FOR THE DESIGN, MANUFACTURING AND APPLICATION OF CUSTOMIZED IMPLANTS
        date: 2015
       words: 7070
      flesch: 47
     summary: The chosen material is put in the variable material, which is later accessible from the system for process management. Instead of changing process definition and adapting it to the new conditions every time a change occurs, we enhanced the system by connecting it to the expert system which deals with unpredicted situations.
    keywords: bone; expert; ident; information; manufacturing; material; osteofixation; process; rules; system; text
       cache: fumecheng-1003.pdf
  plain text: fumecheng-1003.txt

        item: #3 of 526
          id: fumecheng-10112
      author: Zhao, Shengjie; Mao, Luyue; Wu, Nan; Karnaoukh, Sviatoslaw
       title: LOAD PATH VISUALIZATION USING U* INDEX AND PRINCIPAL LOAD PATH DETERMINATION IN THIN-WALLED STRUCTURES
        date: 2025
       words: 5680
      flesch: 64
     summary: This section introduces a visualization methodology for U* load paths by using the streamline approach. A new concept of principal load path is also introduced by evaluating the importance of load paths using statistical means.
    keywords: analysis; design; fig; index; load; load path; path; principal; structure; visualization
       cache: fumecheng-10112.pdf
  plain text: fumecheng-10112.txt

        item: #4 of 526
          id: fumecheng-10128
      author: Kucharski, Derick M. P.; Pinto, Vinícius T.; Rocha, Luiz A. O.; dos Santos, Elizaldo D.; Fragassa, Cristiano; Isoldi, Liércio A.
       title: GEOMETRIC ANALYSIS BY CONSTRUCTAL DESIGN OF STIFFENED STEEL PLATES UNDER BENDING WITH TRANSVERSE I-SHAPED OR T-SHAPED STIFFENERS
        date: 2022
       words: 5602
      flesch: 55
     summary: Key words: Stiffened plates, Computational modeling, Constructal Design, T-Shaped Stiffeners, I-Shaped Stiffeners 1. INTRODUCTION However, when it comes to stiffened plates, analytical solutions are complex and often have limitations related to the boundary conditions and loading, leading to inaccurate results.
    keywords: constructal; design; fig; maximum; plates; rocha; steel; stiffeners; stress; transverse
       cache: fumecheng-10128.pdf
  plain text: fumecheng-10128.txt

        item: #5 of 526
          id: fumecheng-10193
      author: Perec, Andrzej; Radomska-Zalas, Aleksandra; Fajdek-Bieda, Anna; Pude, Frank
       title: PROCESS OPTIMIZATION BY APPLYING THE RESPONSE SURFACE METHODOLOGY (RSM) TO THE ABRASIVE SUSPENSION WATER JET CUTTING OF PHENOLIC COMPOSITES
        date: 2023
       words: 6109
      flesch: 54
     summary: [7], for optimization of abrasive water cutting process using the TOPSIS method [8],or even multi response optimization of process parameters based on the Taguchi-Fuzzy model for coal cutting by water jet technology [9] and multi response optimization on the AWIJ machining of Stainless Steel by the VIKOR approach coupled with S/N ratio methodology [23] have compared the AWIJ principle and the AWSJ principle and shown that abrasive water jet cutting is an appropriate alternative to commonly used diamond grinding or laser cutting processes.
    keywords: abrasive; awsj; composite; cutting; depth; fig; jet; machining; nozzle; parameters; process; surface; water
       cache: fumecheng-10193.pdf
  plain text: fumecheng-10193.txt

        item: #6 of 526
          id: fumecheng-10243
      author: Wu, Fenghe; Lian, Hui; Pei, Guobin; Guo, Baosu; Wang, Zhaohua
       title: DESIGN AND OPTIMIZATION OF THE VARIABLE-DENSITY LATTICE STRUCTURE BASED ON LOAD PATHS
        date: 2023
       words: 6551
      flesch: 58
     summary: First of all, the envelope model of any given structure should be established, and the load paths need to be visualized by the theory of load path. Load path [28, 29] is a concept for tracking transferred load within a structure starting from loading points and ending at supporting points, which has been studied in structural design in recent years
    keywords: cells; density; design; fig; load; load paths; method; model; optimization; paths; stress; structure; unit
       cache: fumecheng-10243.pdf
  plain text: fumecheng-10243.txt

        item: #7 of 526
          id: fumecheng-10267
      author: Markushev, Mikhail; Valeev, Irshat; Valeeva, Aygul; Ilyasov, Rafis; Avtokratova, Elena; Krymskiy, Stanislav; Sitdikov, Oleg
       title: EFFECT OF ELECTRIC PULSING ON THE STRUCTURE, TEXTURE AND HARDNESS OF CRYOROLLED FINE-GRAIN COPPER
        date: 2025
       words: 4737
      flesch: 55
     summary: From grain size distributions (Fig. 4) three modes of dependencies, describing the processes of Cu structure changes under the TMT, were evidenced. The mean subgrain and grain sizes (d and D, consequently) were determined as equivalent diameter of not less than 900 crystallites.
    keywords: a2s; copper; cryorolling; electric; grain; hardness; hdep; mm4; pulsing; structure; texture
       cache: fumecheng-10267.pdf
  plain text: fumecheng-10267.txt

        item: #8 of 526
          id: fumecheng-10396
      author: Kou, Lei; Sysyn, Mykola; Liu, Jianxing
       title: INFLUENCE OF CROSSING WEAR ON ROLLING CONTACT FATIGUE DAMAGE OF FROG RAIL
        date: 2024
       words: 9906
      flesch: 65
     summary: In this paper, the contact process of wheel passing frog rail is calculated by establishing geometric model. In this study, it is necessary to consider the wheel-rail contact state under the combination of frog rail wear, wheel wear and wing rail wear.
    keywords: area; contact; crossing; damage; frog rail; impact; increase; load; rail; rail contact; rail surface; stress; surface; wear; wheel; wing rail
       cache: fumecheng-10396.pdf
  plain text: fumecheng-10396.txt

        item: #9 of 526
          id: fumecheng-10417
      author: Precup, Radu-Emil; Preitl, Stefan; Bojan-Dragos, Claudia-Adina; Hedrea, Elena-Lorena; Roman, Raul-Cristian; Petriu, Emil M.
       title: A LOW-COST APPROACH TO DATA-DRIVEN FUZZY CONTROL OF SERVO SYSTEMS
        date: 2022
       words: 7650
      flesch: 59
     summary: 5 Real-time experimental results expressed as fuzzy control system responses y and u (PWM indicates Pulse Width Modulation) 32 R.-E. PRECUP, S. PREITL, C.-A. BOJAN-DRAGOS, ET AL. fuzzy control system exhibits good control system dynamics performance with respect to the 40 rad step modifications of the reference input. Classical and recent applications of fuzzy control deal with Popov-type stability analysis [32], embedded fuzzy control system for machining processes
    keywords: approach; control; control system; controller; data; fig; model; parameters; precup; process; r.-e; servo; step; system; tuning
       cache: fumecheng-10417.pdf
  plain text: fumecheng-10417.txt

        item: #10 of 526
          id: fumecheng-10425
      author: Miltenović, Aleksandar; Banić, Milan; Tanasković, Jovan; Stefanović-Marinović, Jelena; Rangelov, Damjan; Perić, Marko
       title: WEAR LOAD CAPACITY OF CROSSED HELICAL GEARS
        date: 2024
       words: 4851
      flesch: 63
     summary: He showed different approaches in calculating gear wear like Hertz theory, Holm's, and Archard's wear calculation method for wear linear progression. Miltenović, A., Nikolić, V., Milovančević, M., Banić, M., 2012, Experimental and FEM analysis of sintered steel worm gear wear, Transactions of FAMENA, 36(4), pp.
    keywords: calculation; capacity; contact; fe1.5cr0.2mo; gears; load; min-1; running; steel; wear; worm
       cache: fumecheng-10425.pdf
  plain text: fumecheng-10425.txt

        item: #11 of 526
          id: fumecheng-10428
      author: Singh, Gurpreet; Gupta, Vivek; Chanda, Arnab
       title: MECHANICAL CHARACTERIZATION OF ROTATING TRIANGLE SHAPED AUXETIC SKIN GRAFT SIMULANTS
        date: 2025
       words: 4347
      flesch: 57
     summary: A biofidelic skin simulant material was employed to fabricate auxetic skin graft simulants with a range of rotating triangle variants, using additive manufacturing and biomimetics. A skin simulant was employed and a range of RT configurations, with internal angles varying from 0° to 135°, were tested through the development of skin graft simulants.
    keywords: auxetic; fig; graft; graft simulants; rotating; simulants; skin; skin graft; strain
       cache: fumecheng-10428.pdf
  plain text: fumecheng-10428.txt

        item: #12 of 526
          id: fumecheng-10461
      author: Safaei, Babak; Chukwueloka Onyibo, Emmanuel; Hurdoganoglu, Dogus
       title: EFFECT OF STATIC AND HARMONIC LOADING ON THE HONEYCOMB SANDWICH BEAM BY USING FINITE ELEMENT METHOD
        date: 2022
       words: 9906
      flesch: 54
     summary: Stress comparison of sandwich cores materials, aluminum, SAN foam and honeycomb of the same parameter effect of the applied load on the hexagonal shaped core. 10 Comparison of sandwich core deformation of hexagonal honeycomb core 294 B. SAFAEI, E. CHUKWUELOKA ONYIBO, D. HURDOGANOGLU Table 4 shows FEM and analytical results of the rate of change in length of the sandwich beam when load of 100 N is applied.
    keywords: analysis; core; core sandwich; fig; frequency; hexagonal; honeycomb; honeycomb core; honeycomb sandwich; materials; model; sandwich; sandwich beam; sandwich structure; stress; structure
       cache: fumecheng-10461.pdf
  plain text: fumecheng-10461.txt

        item: #13 of 526
          id: fumecheng-10464
      author: He, Ji-Huan; Moatimid, Galal M.; Zekry, Marwa H.
       title: FORCED NONLINEAR OSCILLATOR IN A FRACTAL SPACE
        date: 2022
       words: 8738
      flesch: 63
     summary: F F              + − − − − + −  −  + = − − − − + + (32) where ....... 2 2 10 2 2 1 1 0 0 +++=+   +   +    DDD Tdt dT Tdt dT Tdt dT dt d  and 2 2 2 2 0 0 1 1 0 22 2 ( 2 ) ..., n n d D D D D D D D Tdt     + + + +   Therefore, it is convenient to write the solution of Eq.
    keywords: + +; fractal; oscillator; parameter; solution; stability; t t
       cache: fumecheng-10464.pdf
  plain text: fumecheng-10464.txt

        item: #14 of 526
          id: fumecheng-10469
      author: Jankowski, Piotr
       title: DETECTION OF NONLOCAL CALIBRATION PARAMETERS AND RANGE INTERACTION FOR DYNAMICS OF FGM POROUS NANOBEAMS UNDER ELECTRO-MECHANICAL LOADS
        date: 2022
       words: 9181
      flesch: 55
     summary: Karami and Janghorban [61] proposed novel higher-order shear deformation beam theory and studied natural vibration of functionally graded nanobeam using nonlocal strain gradient theory. Liu, H., Lv, Z., Wu, H., 2019, Nonlinear free vibration of geometrically imperfect functionally graded sandwich nanobeams based on nonlocal strain gradient theory, Composite Structures, 214, pp.
    keywords: nanobeam; parameters; theory; vibration;  
       cache: fumecheng-10469.pdf
  plain text: fumecheng-10469.txt

        item: #15 of 526
          id: fumecheng-10540
      author: Zhou, Bin; Chen, Jing; Wu, Qun; Pamučar, Dragan; Wang, Weizhong; Zhou, Ligang
       title: RISK PRIORITY EVALUATION OF POWER TRANSFORMER PARTS BASED ON HYBRID FMEA FRAMEWORK UNDER HESITANT FUZZY ENVIRONMENT
        date: 2022
       words: 10982
      flesch: 58
     summary: Even though the FSs have numerous domains to FMEA problems, few studies paid attention to the HFSs for FMEA risk evaluation. In this framework, the hesitant fuzzy sets (HFSs) are used to depict the uncertainty in risk evaluation.
    keywords: analysis; experts; fmea; framework; fuzzy; hfss; information; method; model; objective; power; risk; risk evaluation; risk fmea; risk indicators; risk priority; transformer; weights
       cache: fumecheng-10540.pdf
  plain text: fumecheng-10540.txt

        item: #16 of 526
          id: fumecheng-10544
      author: He, Ji-Huan; Y. Abd Elazem, Nader
       title: THE CARBON NANOTUBE-EMBEDDED BOUNDARY LAYER THEORY FOR ENERGY HARVESTING
        date: 2022
       words: 7263
      flesch: 60
     summary: In other words, increasing the value of Pr accelerates the decay of the temperature field away from the heated surface, increasing the rate of heat transfer and a 226 J.-H. HE, N. Y. ABD ELAZEM decrease in the thickness of the thermal boundary layer [38]. Impact of the slip parameter on the heat transfer rate profiles at ϕ=0.25, M=R=3, and Ec= d=1 The Carbon Nanotube-Embedded Boundary Layer Theory for Energy Harvesting 233 The profiles of heat transfer -g'(η) of SWCNT, MWCNT, Cu-water, and Ag-water nanofluids decrease as L and ϕ parameters rise.
    keywords: boundary; carbon; heat; mwcnt; nanofluids; nanotubes; parameter; profiles; temperature; transfer; water
       cache: fumecheng-10544.pdf
  plain text: fumecheng-10544.txt

        item: #17 of 526
          id: fumecheng-10562
      author: Damjanović, Milanko; Stević, Željko; Stanimirović, Dragan; Tanackov, Ilija; Marinković, Dragan
       title: IMPACT OF THE NUMBER OF VEHICLES ON TRAFFIC SAFETY: MULTIPHASE MODELING
        date: 2022
       words: 7619
      flesch: 64
     summary: Traffic safety is one of the key issues nowadays, given the fact that a large number of people lose their lives in traffic accidents every day. After the DEA model, IMF SWARA (Improved Fuzzy Stepwise Weight Assessment Ratio Analysis) was applied to determine the weights of inputs and outputs, while the final state of traffic safety by years was determined using the MARCOS (Measurement of alternatives and ranking according to COmpromise solution) method.
    keywords: dea; model; number; road; safety; scenario; traffic; traffic safety; vehicles
       cache: fumecheng-10562.pdf
  plain text: fumecheng-10562.txt

        item: #18 of 526
          id: fumecheng-10575
      author: Mahmood, Lubna; Bahroun, Zied; Ghommem, Mehdi; Alshraideh, Hussam
       title: ASSESSMENT AND PERFORMANCE ANALYSIS OF MACHINE LEARNING TECHNIQUES FOR GAS SENSING E-NOSE SYSTEMS
        date: 2022
       words: 10081
      flesch: 58
     summary: The framework is applied to assess the performance of different machine learning techniques using three different experimental datasets that were previously obtained from MoX gas sensors. 2 Typical response of MoX gas sensor on exposure to ethylene.
    keywords: batch; batches; classification; dataset; features; gas; knn; learning; machine; mape; models; performance; sensor; value
       cache: fumecheng-10575.pdf
  plain text: fumecheng-10575.txt

        item: #19 of 526
          id: fumecheng-10589
      author: Popov, Valentin L.; Poliakov, Aleksandr; Pakhaliuk, Vladimir
       title: ONE-DIMENSIONAL BIOLOGICAL MODEL OF SYNOVIAL JOINTS REGENERATIVE REHABILITATION IN OSTEOARTHRITIS
        date: 2022
       words: 9725
      flesch: 42
     summary: [22, 23], to create and investigate various models of cartilage tissue within the framework of continuum mechanics. From the point of view of regenerative rehabilitation, of interest are studies that have studied the responses of cartilage tissue, cells, and molecules to the action of mechanical stimuli.
    keywords: cartilage; cell; chondrocytes; concentration; conditions; defect; density; ecm; model; msc; rehabilitation; time; tissue; ℎ𝑜𝑢𝑟; 𝐶𝑆0; 𝑚𝑚3
       cache: fumecheng-10589.pdf
  plain text: fumecheng-10589.txt

        item: #20 of 526
          id: fumecheng-10626
      author: Filippov, Alexander E.; Popov, Valentin L.
       title: NUMERICAL SIMULATION OF DYNAMICS OF BLOCK MEDIA BY MOVABLE LATTICE AND MOVABLE AUTOMATA METHODS
        date: 2023
       words: 8329
      flesch: 58
     summary: The equations of the BK model can be written in the following form: Block-media Motion Lattice and Movable Automata Numerical Models 555 ( ) ( ) 2 2 1 1 12 2 ( ) j j j j j j u m k u u u k vt u F v t + −  = + − + − −  , (1) where v=const is the external driving velocity and vj≡∂uj/∂t is an array of individual block velocities (j=1, … N). The system of equations of motion takes the form: ( ) ( ) 2 , , 2 1, 1, , 1 , 1 , 1 , ,2 4 ( ); j n j n j n j n j n j n j n j n j n u u m k u u u u u k vt u F v t t + − + −   = + + + − − + − +    (4) ( ), , 1 0 , 2 , , , , ( ( )) , 0, 0 ( ) 0 j n j n j n j n j n j n j n F v t F F v v t F v v     = − +    = −  .
    keywords: block; fig; friction; instant; j j; model; motion; plates; system; time
       cache: fumecheng-10626.pdf
  plain text: fumecheng-10626.txt

        item: #21 of 526
          id: fumecheng-10639
      author: Safaei, Babak; Chukwueloka Onyibo, Emmanuel; Hurdoganoglu, Dogus
       title: THERMAL BUCKLING AND BENDING ANALYSES OF CARBON FOAM BEAMS SANDWICHED BY COMPOSITE FACES UNDER AXIAL COMPRESSION
        date: 2022
       words: 9838
      flesch: 54
     summary: In a connected linear buckling analysis of sandwich beams, the load factor on the static load causing buckling was assessed, the critical buckling load and bending behavior of carbon fiber strut imbedded in sandwich core was determined. Also, Fig. 9(b) shows deformation on sandwich core while Fig. 9(c) depicts the bottom skin deformation where both the stress and deformation are at minimum.
    keywords: aerogel; analysis; bending; buckling; carbon; composite; core; deformation; fiber; fig; heat; safaei; sandwich; sandwich beam; structures; temperature
       cache: fumecheng-10639.pdf
  plain text: fumecheng-10639.txt

        item: #22 of 526
          id: fumecheng-10643
      author: Nag, Akash; Dixit, Amit Rai; Petrů, Jana; Váňová, Petra; Konečná, Kateřina; Hloch, Sergej
       title: MAXIMIZATION OF WEAR RATES THROUGH EFFECTIVE CONFIGURATION OF STANDOFF DISTANCE AND HYDRAULIC PARAMETERS IN ULTRASONIC PULSATING WATERJET
        date: 2024
       words: 8935
      flesch: 51
     summary: Hloch, S., Srivastava, M., Nag, A., Muller, M., Hromasová, M., Svobodová, J., Kruml, T., Chlupová, A., 2020, Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness, Wear, 452-453, 203278. 25. Poloprudský, J., Nag, A., Kruml, T., Hloch, S., 2021, Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets, Wear, 488-489, 204136. 32.
    keywords: depth; diameter; disintegration; distance; erosion; jet; material; mpa; nozzle; pressure; standoff; supply; water
       cache: fumecheng-10643.pdf
  plain text: fumecheng-10643.txt

        item: #23 of 526
          id: fumecheng-1065
      author: Willert, Emanuel; Hess, Markus; Popov, Valentin L.
       title: APPLICATION OF THE METHOD OF DIMENSIONALITY REDUCTION TO CONTACTS UNDER NORMAL AND TORSIONAL LOADING
        date: 2015
       words: 3877
      flesch: 69
     summary: In a series of recent papers, Popov and collaborators have introduced the so-called method of dimensionality reduction (MDR), which allows solving normal contact problems of axisymmetric elastic and viscoelastic bodies as well as tangential contact problems with a constant coefficient of friction for arbitrary loading histories In the next paragraph we are going to show how this can be done, by the same method, for torsional contact as well.
    keywords: contact; r r
       cache: fumecheng-1065.pdf
  plain text: fumecheng-1065.txt

        item: #24 of 526
          id: fumecheng-10686
      author: Ziane Ahmed, Nabil; Jerković, Damir D.; Hristov, Nebojša P.; Boukera Abaci, Walid
       title: ANALYTICAL AND EXPERIMENTAL INVESTIGATION OF THE MUZZLE BRAKE EFFICIENCY
        date: 2022
       words: 5428
      flesch: 59
     summary: Ekanch Chaturvedi et al designed a new perforated muzzle brake and investigated its performance such as velocity distribution, pressure growth and muzzle brake force [9]. In this study, the Orlov method as an analytical model is used to calculate the muzzle brake efficiency and muzzle brake force
    keywords: brake efficiency; brake force; efficiency; force; muzzle brake; projectile; recoil; recoil force; results; type; velocity
       cache: fumecheng-10686.pdf
  plain text: fumecheng-10686.txt

        item: #25 of 526
          id: fumecheng-10712
      author: Milićević, Ivan; Popović, Marko; Dučić, Nedeljko; Vujičić, Vojislav; Stepanić, Pavle; Marinković, Dragan; Ćojbašić, Žarko
       title: IMPROVING THE MECHANICAL CHARACTERISTICS OF THE 3D PRINTING OBJECTS USING HYBRID MACHINE LEARNING APPROACH
        date: 2022
       words: 4953
      flesch: 47
     summary: Improving the Mechanical Characteristics of the 3D Printing Objects Using Hybrid Machine Learning... 9 3.2 Optimization of 3D printing process parameters Genetic algorithms (GA) are a search technique that uses heuristic optimization methods to find an exact or approximate solution simulating the mechanism of natural evolution. Furthermore, printed part highly depends on process parameters, position and orientation of the printed part, and performances of the 3D printer which prints the part.
    keywords: algorithm; fdm; network; optimization; parameters; printing; process; process parameters; strength; tensile
       cache: fumecheng-10712.pdf
  plain text: fumecheng-10712.txt

        item: #26 of 526
          id: fumecheng-10736
      author: Limkatanyu, Suchart; Sae-Long, Worathep; Rungamornrat, Jaroon; Buachart, Chinnapat; Sukontasukkul, Piti; Keawsawasvong, Suraparb; Chindaprasirt, Prinya
       title: BENDING, BUCKLING AND FREE VIBRATION ANALYSES OF NANOBEAM-SUBSTRATE MEDIUM SYSTEMS
        date: 2022
       words: 14288
      flesch: 60
     summary: = Proposed model ( )2s m = = Simplified strain gradient model ( )0For all e a Eringen nonlocal model ( )0For all e a Local model Proposed model ( )0.25s m = = Fig. 4 Transverse displacement versus distance along nanobeam of Simulation I for analysis case I 7.1.2.            2 2 5 3 0 0 0 0 5 3 0 3 5 2 20 0 2 3 2 0 4 0 0 4 ( , ) ( , ) ( , ) ( , ) ( ) ( ) ( ) ( , ) ( , ) (2 ) ( , ) ( , ) ( ) ( ) T H L sur eff eff res x L v v x H L eff eff dxdt x t v x t v x t v x t v x t
    keywords: beam; effect; gradient; l t; material; medium; model; nanobeam; strain; substrate; surface; t v; v x; x l; x t;  
       cache: fumecheng-10736.pdf
  plain text: fumecheng-10736.txt

        item: #27 of 526
          id: fumecheng-1074
      author: Troha, Sanjin; Milovančević, Miloš; Kuchak, Alireza
       title: SOFTWARE TESTING OF THE RAIL VEHICLE DYNAMIC CHARACTERISTICS
        date: 2015
       words: 3980
      flesch: 53
     summary: Quality of rail road greatly affects the quality of the movement of rail vehicles. Testing of the vertical acceleration Vertical acceleration significantly affects the stability and tranquility of rail vehicle.
    keywords: acceleration; analysis; fig; frequency; linear; rail; vehicle
       cache: fumecheng-1074.pdf
  plain text: fumecheng-1074.txt

        item: #28 of 526
          id: fumecheng-10743
      author: Ma, Hongjin
       title: SIMPLIFIED HAMILTONIAN-BASED FREQUENCY-AMPLITUDE FORMULATION FOR NONLINEAR VIBRATION SYSTEMS
        date: 2022
       words: 4177
      flesch: 63
     summary: The frequency formulation is [25] 2 2 2 1 2 2 1 1 2 R R R R = − − ω ω ω (11) We can see that the frequency formulation requires only a simple calculation of two integrals, making it much attractive and promising in the nonlinear vibration theory. cos ( ) 2 2 cos B R t t P B t P B B P B B t P B t = + − − = − + ω ω ω ω ω ω ω (12) 2 2 22 2 2 2 2 2 2 2 22 2 2 2 ( ) sin ( cos ) ( ) 2 2 ( )
    keywords: b b; b t; p b; ω ω; − −
       cache: fumecheng-10743.pdf
  plain text: fumecheng-10743.txt

        item: #29 of 526
          id: fumecheng-10789
      author: Baranovski, Igor; Stankovski, Stevan; Ostojić, Gordana; Nikolić, Vlastimir; Simonović, Miloš; Stanojević, Miloš
       title: TOWARD A SMART ECOSYSTEM WITH AUTOMATED SERVICES
        date: 2022
       words: 6587
      flesch: 49
     summary: This is essential for predicting customer behavior, providing personalized service as well as troubleshooting smart service machines (e.g. vending machines). Understanding and predicting customer behavior is a very important feature of smart automated systems.
    keywords: cloud; computing; customer; data; ecosystem; gas; iot; layer; network; self; service; smart; systems
       cache: fumecheng-10789.pdf
  plain text: fumecheng-10789.txt

        item: #30 of 526
          id: fumecheng-10797
      author: Mobki, Hamed; Sedighi, Morteza Homayoun; Azizi, Aydin; Eskandari, Mir Mohammad
       title: DESIGNING AN EFFICIENT OBSERVER FOR THE NON-LINEAR LIPSCHITZ SYSTEM TO TROUBLESHOOT AND DETECT SECONDARY FAULTS CONSIDERING LINEARIZING THE DYNAMIC ERROR
        date: 2022
       words: 6109
      flesch: 60
     summary: The ability to detect faults quickly, without the need for signal excitation, and to detect faults online have made the observer-based fault detection one of the most popular methods for fault detection in non-linear systems; hence, numerous efforts have been made in recent years to further develop the mentioned method. [18-21] have been used frequently in non-linear systems, and a few cases where the Kalman Filter has been used are presented in refs.
    keywords: detection; error; fault; non; observer; system
       cache: fumecheng-10797.pdf
  plain text: fumecheng-10797.txt

        item: #31 of 526
          id: fumecheng-1080
      author: Lazarević, Anđela; Lazarević, Dragoljub
       title: NON-LINEAR MATHEMATICAL MODELS IN THE THEORY OF EXPERIMENTAL DESIGN: APPLICATION IN THE MANUFACTURING PROCESSES
        date: 2015
       words: 4161
      flesch: 46
     summary: Although non-linear mathematical models without factors’ interactions show lower accuracy in the points of experiment than expanded mathematical models, the mean error of both models within the entire experimental space is practically identical. experiment 6.48 1.32 6.48 1.32 3. CONCLUSIONS This paper presents the application of non-linear mathematical models for different technological process modelling.
    keywords: analysis; cutting; design; experiment; factors; interactions; linear; model
       cache: fumecheng-1080.pdf
  plain text: fumecheng-1080.txt

        item: #32 of 526
          id: fumecheng-10836
      author: Ghalambaz, Mohammad; Jin, Haichuan; Bagheri, Amirhossein; Younis, Obai; Wen, Dongsheng
       title: CONVECTIVE FLOW AND HEAT TRANSFER OF NANO-ENCAPSULATED PHASE CHANGE MATERIAL (NEPCM) DISPERSIONS ALONG A VERTICAL SURFACE
        date: 2022
       words: 9466
      flesch: 59
     summary: Nano-encapsulated phase change suspension is a novel type of functional fluid in which the nanoparticles undergo phase change that contribute to heat transfer. Therefore, new working fluids or new techniques capable of enhancing heat transfer or inducing a uniform temperature distribution are of high interest.
    keywords: change; flow; fluid; fusion; heat; heat transfer; nepcm; number; particles; phase; suspension; temperature
       cache: fumecheng-10836.pdf
  plain text: fumecheng-10836.txt

        item: #33 of 526
          id: fumecheng-10846
      author: Kastrevc, Mitja; Gubeljak, Nenad; Detiček, Edvard
       title: DESIGN AND TUNING OF THE LYAPUNOV BASED NONLINEAR POSITION CONTROL OF ELECTROHYDRAULIC SERVO SYSTEMS
        date: 2022
       words: 5455
      flesch: 56
     summary: Nonlinear systems can be divided into subsystems, whose numbers depend on dynamical model order. Because designing positioning servo systems are complex spatially for additional boundary conditions, computer simulation of the behavior of such systems is necessary.
    keywords: backstepping; control; controller; parameters; servo; system
       cache: fumecheng-10846.pdf
  plain text: fumecheng-10846.txt

        item: #34 of 526
          id: fumecheng-10848
      author: Feng, Guangqing
       title: A CIRCULAR SECTOR VIBRATION SYSTEM IN A POROUS MEDIUM: A FRACTAL-FRACTIONAL MODEL AND HE’S FREQUENCY FORMULATION
        date: 2025
       words: 3781
      flesch: 57
     summary: The results show that the two methods are very effective for fractal nonlinear oscillators. The result shows that two methods are accurate tools to quickly calculating the periodic properties of fractal nonlinear oscillators, and that the fractal dimension of a porous medium plays an important role in vibration attenuation.
    keywords: fractal; frequency; j.h; nonlinear; oscillator; sector; vibration
       cache: fumecheng-10848.pdf
  plain text: fumecheng-10848.txt

        item: #35 of 526
          id: fumecheng-10856
      author: Stojkovic, Milos; Turudija, Rajko; Trifunovic, Milan; Pavlovic, Marko; Jovanovic, Ivan; Uzelac, Nenad; Milenkovic, Vladeta
       title: A STUDY OF THE USE OF MIXED REALITY FOR CAPTURING HUMAN OBSERVATION AND INFERENCES IN PRODUCTION ENVIRONMENTS
        date: 2022
       words: 8933
      flesch: 47
     summary: Going a step further than merely using AR to replace maintenance manuals, send expert instructions, visualize data or “overlap” the virtual onto the real world, AR systems can also be combined with machine sensors, machine learning technology, and other 8 M. STOJKOVIC, R. TURUDIJA, M. TRIFUNOVIC, ET AL. pillars of I4.0, to get great results. The most popular areas of AR applications were assembly and maintenance, but closely followed by training/learning, with production design, safety, remote assistance, and robotics being less popular areas of research.
    keywords: app; capturing; context; data; human; information; knowledge; learning; observation; operator; process; production; reality; system
       cache: fumecheng-10856.pdf
  plain text: fumecheng-10856.txt

        item: #36 of 526
          id: fumecheng-10860
      author: Chakraborty, Sayanta; Saha, Apu Kumar
       title: SELECTION OF FORKLIFT UNIT FOR TRANSPORT HANDLING USING INTEGRATED MCDM UNDER NEUTROSOPHIC ENVIRONMENT
        date: 2024
       words: 10128
      flesch: 57
     summary: Furthermore, the method of forklift selection criteria using industry expert responses and literature is a significant benefit of this suggested endeavor. The application of the proposed approach in forklift selection presented in Section 5 demonstrates the efficacy of projected integrated MCDM technique.
    keywords: alternatives; criteria; decision; forklift; fucom; handling; making; mcdm; method; model; neutrosophic; selection; w w; warehouse
       cache: fumecheng-10860.pdf
  plain text: fumecheng-10860.txt

        item: #37 of 526
          id: fumecheng-10875
      author: Ćulum, Igor; Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana
       title: EXPERIMENTAL INVESTIGATION OF FACE MILLING ALUMINUM ALLOY EN AW – 2011 T6 USING VARIOUS COOLING TECHNIQUES
        date: 2023
       words: 6412
      flesch: 64
     summary: Using the test results and regression models, surface plots showing the influence of cutting speed and feed per tooth on up milled surface roughness parameters were generated. Using the test results and regression models, surface plots showing the influence of cutting speed and feed per tooth on up milled surface roughness parameters were generated.
    keywords: c t; cutting; f c; milling; roughness; surface; surface roughness; t ; tooth;  
       cache: fumecheng-10875.pdf
  plain text: fumecheng-10875.txt

        item: #38 of 526
          id: fumecheng-1088
      author: Pavlović, Saša; Vasiljević, Darko; Stefanović, Velimir; Stamenković, Zoran; Ayed, Sadoon
       title: OPTICAL MODEL AND NUMERICAL SIMULATION OF THE NEW OFFSET TYPE PARABOLIC CONCENTRATOR WITH TWO TYPES OF SOLAR RECEIVERS
        date: 2015
       words: 5024
      flesch: 49
     summary: 6 a) Structure of the new type of solar offset parabolic concentrator; b) Geometrical model of the new type of solar offset parabolic concentrator Usually the paraboloids that are used in solar collectors have rim angles from 10 to 90 degrees.
    keywords: absorber; concentrator; dish; energy; fig; offset; parabolic; parabolic concentrator; rays; receiver; solar; system
       cache: fumecheng-1088.pdf
  plain text: fumecheng-1088.txt

        item: #39 of 526
          id: fumecheng-109
      author: Andjelković, Boban; Djordjević, Biljana; Jovanović, Nataša
       title: MODELING OF DEFECTS DETECTION BY ANALYZING THERMAL IMAGES
        date: 2014
       words: 6182
      flesch: 52
     summary: THE EXPERIMENT The goal of the research is to confirm the possibility of applying non-destructive methods of examining and detecting material defects. The analysis of thermal images enables continuous monitoring of the thermal changes of the surface.
    keywords: defects; detection; direction; environment; fig; filtering; image; kernel; object; results; temperature; thermovision; values
       cache: fumecheng-109.pdf
  plain text: fumecheng-109.txt

        item: #40 of 526
          id: fumecheng-10915
      author: Pavlović, Vukašin; Tomić, Miša; Stan, Sergiu-Dan; Banić, Milan; Simonović, Miloš; Milošević, Miloš
       title: CONTROL OF A WIRE TENSIONING SYSTEM WITH FORCE PREDICTION USING ARTIFICIAL NEURAL NETWORKS
        date: 2024
       words: 4812
      flesch: 56
     summary: Depending on the purpose, wire tensioning systems can be generally divided into two groups: constant tension control and variable tension control [5], where constant tension control is used in fields such as printing and papermaking, while variable tension control can be used in fields where wire can be wound/unwound on a winch or reel. The problem of wire tensioning control in the dynamic system when the robotic units move was considered.
    keywords: control; force; network; system; tension; tensioning; units; winding; wire
       cache: fumecheng-10915.pdf
  plain text: fumecheng-10915.txt

        item: #41 of 526
          id: fumecheng-10949
      author: Hwang, Byungil; Han, Yurim; Matteini, Paolo
       title: BENDING FATIGUE BEHAVIOR OF AG NANOWIRE/CU THIN-FILM HYBRID INTERCONNECTS FOR WEARABLE ELECTRONICS
        date: 2022
       words: 3529
      flesch: 61
     summary: Cu thin films were deposited on the Ag nanowire/PI samples via a magnetron sputtering system. Lastly, a Cu thin film was deposited on the PI substrate using DC magnetron sputtering at 100 W at room temperature for 15 min. Thickness of Cu thin film was ~400 nm.
    keywords: bending; cap; fig; films; nanowire; resistance; thin
       cache: fumecheng-10949.pdf
  plain text: fumecheng-10949.txt

        item: #42 of 526
          id: fumecheng-10953
      author: Faghidian, Seyed Ali; Tounsi, Abdelouahed
       title: DYNAMIC CHARACTERISTICS OF MIXTURE UNIFIED GRADIENT ELASTIC NANOBEAMS
        date: 2022
       words: 6634
      flesch: 46
     summary: The influence of the gradient characteristic parameters along with the mixture parameter on the fundamental frequency of mixture unified gradient elastic beams is demonstrated in Figs. 3 Normalized fundamental frequency of mixture unified gradient elastic beams with fully-fixed ends 548 S. A. FAGHIDIAN, A. TOUNSI Fig.
    keywords: elastic; gradient; gradient theory; m x; mixture; theory; x t
       cache: fumecheng-10953.pdf
  plain text: fumecheng-10953.txt

        item: #43 of 526
          id: fumecheng-1096
      author: Slavchev, Svetoslav; Georgieva, Kalina; Stoilov, Valeri; Purgić, Sanel
       title: ANALYSIS OF THE RESULTS OF THEORETICAL AND EXPERIMENTAL STUDIES OF FREIGHT WAGON FALS
        date: 2015
       words: 2149
      flesch: 61
     summary: The first model was built up of finite elements type “Solid” and the second of “Shell” finite elements. All theoretically required ratios between the parameters of finite elements that allow modeling of the structure of the body with 3D solids were fulfilled.
    keywords: analysis; elements; finite; shell; wagon
       cache: fumecheng-1096.pdf
  plain text: fumecheng-1096.txt

        item: #44 of 526
          id: fumecheng-10976
      author: Wang, Zhaohua; Yang, Guobiao; Sun, Yinxu; Li, Yongxin; Wu, Fenghe
       title: AN IMPROVED BARE-BONES PARTICLE SWARM ALGORITHM FOR MULTI-OBJECTIVE OPTIMIZATION WITH APPLICATION TO THE ENGINEERING STRUCTURES
        date: 2023
       words: 8096
      flesch: 59
     summary: Leong, W.F., 2008, Multi-objective particle swarm optimization: integration of dynamic population and multiple-swarm concepts and constraint handling, PhD Thesis, Oklahoma State University, America, 213 p. 26. The output values of m objective functions constitute the objective space of multi-objective optimization.
    keywords: algorithm; global; mopso; multi; number; objective; optimization; particle; problems; set; solution; swarm
       cache: fumecheng-10976.pdf
  plain text: fumecheng-10976.txt

        item: #45 of 526
          id: fumecheng-10999
      author: Zhao, Zhibin; Zhou, Wenjie; Liu, Peijun; Liu, Zhirui
       title: EFFECTS OF MONITORING SIGNAL HYSTERESIS ON SPEED REGULATION FOR THE AERO-DERIVATIVE GAS TURBINE
        date: 2023
       words: 6155
      flesch: 52
     summary: From the perspective of development, gas turbine control system has experienced the stages from the mechanical hydraulic control, analog electronic control to digital electronic control [6]. When the monitoring signal hysteresis is coupled, the effect of pressure signal hysteresis is greater than that of speed signal hysteresis.
    keywords: control; fig; fuel; gas; hysteresis; monitoring; quantity; signal; signal hysteresis; speed; speed signal; turbine
       cache: fumecheng-10999.pdf
  plain text: fumecheng-10999.txt

        item: #46 of 526
          id: fumecheng-11000
      author: Fang, Yudong; Han, Weijian; Zhan, Zhenfei; Huang, Li
       title: NUMERICAL STUDY AND DESIGN OPTIMIZATION ON ENERGY ABSORPTION OF THIN-WALLED TUBE WITH A YOSHIMURA PATTERN
        date: 2024
       words: 7110
      flesch: 55
     summary: The paper also highlights multi-objective optimization for origami tubes with a Yoshimura pattern. Gaining insightful understanding of the effects of structural parameters on the performance of an origami tube is helpful in designing desired origami tubes with suitable layouts of origami patterns and appropriate parameters.
    keywords: absorption; analysis; crushing; energy; energy absorption; fig; force; optimization; origami; origami tube; structures; tube
       cache: fumecheng-11000.pdf
  plain text: fumecheng-11000.txt

        item: #47 of 526
          id: fumecheng-11007
      author: Safaei, Babak; Chukwueloka Onyibo, Emmanuel; Goren, Mehmet; Kotrasova, Kamila; Yang, Zhicheng; Arman, Samaneh; Asmael, Mohammed
       title: FREE VIBRATION INVESTIGATION ON RVE OF PROPOSED HONEYCOMB SANDWICH BEAM AND MATERIAL SELECTION OPTIMIZATION
        date: 2023
       words: 6911
      flesch: 49
     summary: Considering the effect of boundary conditions on sandwich beam structure. In general, fixed-fixed boundary conditions increased sandwich beam natural frequency as well as corresponding directional deformation.
    keywords: beam; core; foam; frequency; honeycomb; honeycomb sandwich; materials; safaei; sandwich; sandwich beam; structures; vibration
       cache: fumecheng-11007.pdf
  plain text: fumecheng-11007.txt

        item: #48 of 526
          id: fumecheng-11038
      author: Pavlović, Nenad T.; Stojiljković, Dušan
       title: GUIDING ACCURACY OF THE WATT COMPLIANT COGNATE MECHANISMS
        date: 2022
       words: 3162
      flesch: 56
     summary: There are many papers considering the structure and function of the compliant joints and compliant mechanisms. A number of authors have established basic nomenclature and classification for the components of compliant mechanisms [2, 3, 4].
    keywords: body; cognate; compliant; guiding; mechanisms; watt
       cache: fumecheng-11038.pdf
  plain text: fumecheng-11038.txt

        item: #49 of 526
          id: fumecheng-11056
      author: Boukera Abaci, Walid; Hristov, Nebojsa; Radisavljevic, Igor; Stojnic, Lazar; Anicic, Aleksa
       title: EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE PERFORMANCES OF A SMALL WEAPON BARREL DURING ITS LIFECYCLE
        date: 2023
       words: 5158
      flesch: 54
     summary: [14] provided a new finite element meshing strategy for the worn barrel and a new parametric geometric modeling method for gun barrel using Python code and ABAQUS software. Lawton, B., 2001, Thermo-chemical erosion in gun barrels, Wear, 251(1-12), pp.
    keywords: barrel; fig; firing; number; numerical; projectile; results; rifle; simulation; standard
       cache: fumecheng-11056.pdf
  plain text: fumecheng-11056.txt

        item: #50 of 526
          id: fumecheng-11090
      author: Chaubey, Sujeet Kumar; Gupta, Kapil; Madić, Miloš
       title: AN INVESTIGATION ON MEAN ROUGHNESS DEPTH AND MATERIAL EROSION SPEED DURING MANUFACTURING OF STAINLESS-STEEL MINIATURE RATCHET GEARS BY WIRE-EDM
        date: 2023
       words: 6468
      flesch: 52
     summary: Figures 6, 7 and 8 depict bearing area curves of the theoretical concept, best surface quality miniature ratchet gear Rz- 5.30 µm and poor surface quality miniature ratchet gear Bearing area curve for poor surface quality ratchet gear The coefficient of friction (COF) which is a ratio between friction and normal forces depends on adhesion and roughness between two surfaces.
    keywords: depth; edm; erosion; gear; material; mean; miniature; parameters; ratchet; roughness; speed; surface; values; wire
       cache: fumecheng-11090.pdf
  plain text: fumecheng-11090.txt

        item: #51 of 526
          id: fumecheng-11094
      author: Ebadi, Sepideh; Tajdin, Ali; Mahdavi, Iraj; Fazlollahtabar, Hamed
       title: ROUGH MULTI- PERIOD NETWORK DATA ENVELOPMENT ANALYSIS FOR EVALUATION OF SUPPLY CHAIN: A CASE STUDY OF SKILL TRAINING IN IRAN
        date: 2024
       words: 5076
      flesch: 46
     summary: Li, Y., Abtahi, A.R., Seyedan, M., 2018, Supply chain performance evaluation using fuzzy network data envelopment analysis: a case study in automotive industry, Annals of Operations Research, 275(2), pp. 461-484. Rostamy-Malkhalifeh, M., Mollaeian, E., 2012, Evaluating performance supply chain by a new non-radial network DEA model with fuzzy data, Journal of Data Envelopment Analysis and Decision, pp. 1-9. 9.
    keywords: analysis; chain; data; efficiency; envelopment; evaluation; model; network; performance; supply
       cache: fumecheng-11094.pdf
  plain text: fumecheng-11094.txt

        item: #52 of 526
          id: fumecheng-11095
      author: Babaeimorad, Samane; Fattahi, Parviz; Fazlollahtabar, Hamed; Shafiee, Mahmood
       title: AN INTEGRATED OPTIMIZATION OF PRODUCTION AND PREVENTIVE MAINTENANCE SCHEDULING IN INDUSTRY 4.0
        date: 2024
       words: 5098
      flesch: 53
     summary: In this paper, a new PM scheduling mathematical model is formulated for the integrated scheduling of parallel machine production and PM interventions such that the completion time as well as the expected cost are simultaneously minimized. Sloan, T. W., Shanthikumar, J.G., 2000, Combined production and maintenance scheduling for a multiple product, single- machine production system.
    keywords: job; jobs; machine; maintenance; model; operations; production; scheduling; time
       cache: fumecheng-11095.pdf
  plain text: fumecheng-11095.txt

        item: #53 of 526
          id: fumecheng-11146
      author: Kushwaha, Dinesh Kumar; Panchal, Dilbagh; Sachdeva, Anish
       title: A MODIFIED FMEA APPROACH BASED INTEGRATED DECISION FRAMEWORK FOR OVERCOMING THE PROBLEMS OF SUDDEN FAILURE AND ACCIDENTAL HAZARDS IN TURBINE AND ALTERNATOR UNIT
        date: 2025
       words: 8767
      flesch: 58
     summary: Failure risk analysis of transmission system of an automobile industry was conducted to study the unavailability of considered system [17]. [21] proposed a fuzzy FMEA approach-based integrated framework for prioritizing the most critical components on the basis of rank of failure causes in a milk process plant.
    keywords: analysis; approach; causes; failure; fmea; framework; oil; process; risk; system; table; tau; values
       cache: fumecheng-11146.pdf
  plain text: fumecheng-11146.txt

        item: #54 of 526
          id: fumecheng-11152
      author: Wang, Yizhi; Zhu, Quanmin; Huang, Tao; Han, Xiaodong; Lin, Min
       title: MODELLING AND SIMULATION OF NONLINEAR DYNAMIC FLOW FIELD AND TEMPERATURE FIELD OF DEPYROGENATION TUNNEL
        date: 2024
       words: 6362
      flesch: 43
     summary: In this research, the flow field and temperature field simulation, calculation and analysis are creatively carried out in terms of depyrogenation tunnel, a very popular preparation drying- sterilization equipment in pharmaceutical processes with strong dynamic characteristics. Front size; b) Reverse side The flow field and temperature field distribution of section X=0.683 m were shown in Fig.
    keywords: airflow; depyrogenation; drying; field; flow; heating; mesh; process; simulation; sterilization; temperature; temperature field; tunnel; velocity
       cache: fumecheng-11152.pdf
  plain text: fumecheng-11152.txt

        item: #55 of 526
          id: fumecheng-11256
      author: Zhao, Huacheng; Chen, Jianneng; Xu, Gaohuan
       title: DESIGN METHODOLOGY AND CHARACTERISTICS ANALYSIS OF HIGH-ORDER MULTI-SEGMENT DEFORMED ECCENTRIC NON-CIRCULAR GEAR
        date: 2024
       words: 7447
      flesch: 65
     summary: [13] proposed to express non-circular gear pitch curves by means of numerical points instead of any function, for the purpose of fitting complex form pitch curves.   = − − − −          r R k n m k n m n m r R k n m k n m n n n m n            (1) where r11, r12 are the polar radii of the eccentric gear for two segments, R is radius of the eccentric gear, k is the eccentricity ratio (k=e/R, e is the eccentricity of eccentric gear), 1 is the polar angle of the eccentric gear, n1 is the order of the eccentric gear, m11, m12 are the deformation coefficients.
    keywords: gear; j j; segment; − −;  ;  
       cache: fumecheng-11256.pdf
  plain text: fumecheng-11256.txt

        item: #56 of 526
          id: fumecheng-1133
      author: Vitković, Nikola; Mitković, Milan M.; Mitković, Milorad B.; Korunović, Nikola; Stevanović, Dalibor; Veselinović, Marko
       title: REVERSE ENGINEERING OF THE MITKOVIC TYPE INTERNAL FIXATOR FOR LATERAL TIBIAL PLATEAU
        date: 2015
       words: 4131
      flesch: 48
     summary: 5 Definition of MIF-LTP contact surface with initial parametric points: a) Projected Curve on bone polygonal model; b) Anatomical and Supporting points; c) Surface created over the constructed points; d) By the application of techniques and procedures created by MAF it is possible to create complete bone models even in the cases when input scans provide incomplete data 262 N. VITKOVIĆ, M. M. MITKOVIĆ, M.B. MITKOVIĆ, N. KORUNOVIĆ, D. STEVANOVIĆ, M. VESELINOVIĆ about bone geometry, topology and anatomy, as presented in Fig.
    keywords: bone; fixator; internal; ltp; mif; model; points; surface
       cache: fumecheng-1133.pdf
  plain text: fumecheng-1133.txt

        item: #57 of 526
          id: fumecheng-11337
      author: Ha, Heebo; Müller, Sebastian; Baumann, Roelf-Peter; Hwang, Byungil
       title: PEAKFORCE QUANTITATIVE NANOMECHANICAL MAPPING FOR SURFACE ENERGY CHARACTERIZATION ON THE NANOSCALE: A MINI-REVIEW
        date: 2024
       words: 4907
      flesch: 55
     summary: Surface energy is influenced by various factors such as surface functionality and morphology. Owing to the high surface-to-volume ratio, surface energy at the nanoscale can be different from that of the bulk.
    keywords: adhesion; afm; angle; characterization; contact; force; nanoscale; qnm; surface; surface energy; 𝐹𝑎𝑑ℎ
       cache: fumecheng-11337.pdf
  plain text: fumecheng-11337.txt

        item: #58 of 526
          id: fumecheng-11368
      author: Fischer, Szabolcs; Kocsis Szürke, Szabolcs
       title: DETECTION PROCESS OF ENERGY LOSS IN ELECTRIC RAILWAY VEHICLES
        date: 2023
       words: 8424
      flesch: 55
     summary: The affecting factors regarding energy consumption can be categorized into three main groups: (i) infrastructure effects, (ii) transportation organization effects, and (iii) external environmental impact [9]. 2. METHODOLOGY OF POSSIBILITIES FOR OPTIMIZING ENERGY CONSUMPTION 2.1.
    keywords: braking; case; consumption; data; energy; energy consumption; fig; kwh; optimization; railway; section; speed; time; train
       cache: fumecheng-11368.pdf
  plain text: fumecheng-11368.txt

        item: #59 of 526
          id: fumecheng-11384
      author: Zhang, Cheng; Li, Songxiao; Zhang, Zhuo
       title: MODELING AND SIMULATION OF INDUSTRIAL ROBOT ARMS USING SIMSCAPE MULTIBODY
        date: 2025
       words: 7750
      flesch: 59
     summary: 20 Error between simulation trajectory and ideal trajectory of robot arm Table 7 Error between simulation trajectory and ideal trajectory of the end execution point of robot arm MBS model Method Maximum Error (mm) Minimum Error (mm) Average Error (mm) Quintic Polynomial Trajectory 3.8730e-09 0 9.0446e-11 B-Spline 2.1104e-09 0 4.4756e-11 Minimum Jerk Polynomial Trajectory 4.4408e-09 0 1.2206e-10 5. CONCLUSION The MBS modeling and Simulation of DOBOT robot arm are carried out by using Simscape Multibody in this paper. The dynamic simulation modeling problem of industrial robot arm is solved, and the trajectory planning dynamic simulation is performed in this paper.
    keywords: arm; fig; joint; model; module; robot; robot arm; simulation; system; trajectory
       cache: fumecheng-11384.pdf
  plain text: fumecheng-11384.txt

        item: #60 of 526
          id: fumecheng-114
      author: Todorović, Milena; Živković, Dragoljub; Mančić, Marko; Milčić, Dragan
       title: DYNAMIC BEHAVIOUR OF HOT WATER BOILERS DURING START UP
        date: 2014
       words: 4261
      flesch: 59
     summary: 1 Combustion chamber efficiency depending on a wide range of boiler load [11] 88 M. TODOROVIĆ, D. ŢIVKOVIĆ, M. MANĈIĆ, D. MILĈIĆ 4. COEFFICIENT OF EXCESS AIR RATIO DURING THE BOILER'S START UP Coefficient of excess air during the boiler's start-up r is defined by the following assumptions [11]:  starting up the boiler is carried out at constant sub-pressure in the combustion chamber, which is equal to the vacuum, which is maintained in the stationary mode, and,  suction of the waste air from the atmosphere, which depends on non-hermetic boiler's properties, is considered as a constant value that is determined by the constructive scheme of the fuel supply and technical condition of the boiler. 2 Characteristics of excess air ratio depending on a wide range of boiler load [11] 5.
    keywords: boiler; chamber; combustion; combustion chamber; heat; load; process; r r; start; water
       cache: fumecheng-114.pdf
  plain text: fumecheng-114.txt

        item: #61 of 526
          id: fumecheng-11408
      author: He, Chun-Hui; Liu, Chao
       title: FRACTAL DIMENSIONS OF A POROUS CONCRETE AND ITS EFFECT ON THE CONCRETE’S STRENGTH
        date: 2023
       words: 5163
      flesch: 65
     summary: There are many methods to calculate fractal dimensions, among which the Hausdorff dimensions are the most used one, its definition is [24, 26] ln ln N r  = (3) where N is new measured units when we measure the fractal pattern using a reduced 1/r scale. It is interesting to note that most natural materials have fractal dimensions closed to 1.618, the golden mean [29,30].
    keywords: concrete; dimensions; fractal; porosity; size; strength
       cache: fumecheng-11408.pdf
  plain text: fumecheng-11408.txt

        item: #62 of 526
          id: fumecheng-11420
      author: Fischer, Szabolcs; Harangozó, Dóra; Németh, Dalma; Kocsis, Bence; Sysyn, Mykola; Kurhan, Dmytro; Brautigam, András
       title: INVESTIGATION OF HEAT-AFFECTED ZONES OF THERMITE RAIL WELDINGS
        date: 2024
       words: 7645
      flesch: 61
     summary: The rails can be connected with the help of fishplates and bolts, as well as rail welding. These methods can be well adapted to predict the fatigue crack initiation, thus, the life cycle of rail welding.
    keywords: axis; fig; hardness; heat; rail; railway; running; sample; surface; thermite; values; welding
       cache: fumecheng-11420.pdf
  plain text: fumecheng-11420.txt

        item: #63 of 526
          id: fumecheng-11429
      author: Kim, Haeji; Qaiser, Nadeem; Hwang, Byungil
       title: ELECTRO-MECHANICAL RESPONSE OF STRETCHABLE PDMS COMPOSITES WITH A HYBRID FILLER SYSTEM
        date: 2023
       words: 4736
      flesch: 54
     summary: Pure PDMS (Fig. 3a) and PEDOT:PSS/PDMS (Fig. 3b) showed smooth surface indicating that the PEDOT:PSS was homogeneously dispersed in PDMS without severe agglomeration. 2 Stress-strain curves of PDMS composites with the different PEDOT:PSS contents.
    keywords: agnw; cnt; composites; fig; materials; pdms; pedot; pss; strain; stretchable
       cache: fumecheng-11429.pdf
  plain text: fumecheng-11429.txt

        item: #64 of 526
          id: fumecheng-11450
      author: Zhu, Xingtong; Huang, Minchuan; Chen, Ke
       title: CONDITION MONITORING OF ROLLER BEARING USING ENHANCED DEMPSTER/SHAFER EVIDENCE THEORY
        date: 2025
       words: 4977
      flesch: 48
     summary: Deng, Z., Wang, J., 2020, Conflicting evidence combination method based on evidence distance and belief entropy, in 2020 IEEE International Conference on Networking, Sensing and Control (ICNSC), Nanjing, China, pp. Key words: Evidence combination, Generalized Jaccard coefficient, Falsity, Bearing Condition monitoring, Dempster-Shafer (D-S) Received: April 25, 2023 / Accepted August 11, 2023
    keywords: bearing; coefficient; condition; dempster; diagnosis; evidence; method; monitoring; probability; shafer; theory
       cache: fumecheng-11450.pdf
  plain text: fumecheng-11450.txt

        item: #65 of 526
          id: fumecheng-11470
      author: Cao, Yanjie; Mohamad Nor, Norzalilah; Samad, Zahurin
       title: STUDY OF FRICTION COMPENSATION MODEL FOR MOBILE ROBOT’S JOINTS
        date: 2024
       words: 6170
      flesch: 51
     summary: Nevmerzhitskiy, M.N., Notkin, B.S., Vara, A.V., Zmeu, K.V., 2019, Friction model of industrial robot joint with temperature correction by example of KUKA KR10, Journal of Robotics, 2019, 6931563. 26. Iskandar, M., Wolf, S., 2019, Dynamic friction model with thermal and load dependency: modeling, compensation, and external force estimation, In 2019 International Conference on Robotics and Automation (ICRA), pp.
    keywords: compensation; data; fig; friction; friction compensation; friction model; joint; mobile; model; network; robot; speed; torque
       cache: fumecheng-11470.pdf
  plain text: fumecheng-11470.txt

        item: #66 of 526
          id: fumecheng-11485
      author: He, Ji-Huan; He, Chun-Hui; Alsolami, Abdulrahman Ali
       title: A GOOD INITIAL GUESS FOR APPROXIMATING NONLINEAR OSCILLATORS BY THE HOMOTOPY PERTURBATION METHOD
        date: 2023
       words: 3462
      flesch: 58
     summary: Anjum, N., He, J.H., Ain, Q. T., Tian, D., 2021, Li-He’s modified homotopy perturbation method for doubly-clamped electrically actuated microbeams-based microelectromechanical system, Facta Universitatis Series Mechanical Engineering, 19(4), pp. Ji, Q.P., Wang, J., Lu, L.X., Ge, C.F., 2021, Li-He's modified homotopy perturbation method coupled with the energy method for the dropping shock response of a tangent nonlinear packaging system, Journal of Low Frequency Noise, Vibration and Active Control, 40(2) , pp.675-682. 17.
    keywords: homotopy; method; perturbation
       cache: fumecheng-11485.pdf
  plain text: fumecheng-11485.txt

        item: #67 of 526
          id: fumecheng-11486
      author: He, Ji-Huan; Yang, Qian; He, Chun-Hui; Alsolami, Abdulrahman Ali
       title: PULL-DOWN INSTABILITY OF THE QUADRATIC NONLINEAR OSCILLATORS
        date: 2023
       words: 3249
      flesch: 60
     summary: Yeasmin, I.A., Rahman, M., Alam, M., 2021, The modified Lindstedt–Poincare method for solving quadratic nonlinear oscillators, Journal of Low Frequency Noise, Vibration and Active Control, 40(3), pp. 1351-1368. This paper deploys the amplitude-frequency formulation for nonlinear oscillators to reveal the critically important mechanism of the pseudo-periodic motion, and finds the quadratic nonlinear force contributes to the pull-down phenomenon in each cycle of the periodic motion, when the force reaches a threshold value, the pull-down instability occurs.
    keywords: instability; motion; periodic; pull
       cache: fumecheng-11486.pdf
  plain text: fumecheng-11486.txt

        item: #68 of 526
          id: fumecheng-11506
      author: Al-Abboodi, Hamid; Fan, Huiqing; Al-Bahrani, Mohammed; Abdelhussien, Abdelsalam; Mohamad, Barhm
       title: MECHANICAL CHARACTERISTICS OF NANO-CRYSTALLINE MATERIAL IN METALLIC GLASS FORMERS
        date: 2024
       words: 6792
      flesch: 61
     summary: As anticipated, SAM2X5 (a FeB-based BMG) has exhibited Vickers indentation toughness values that are slight lower than the those of other FeC-based BMGs The Quinn and Bradt [30] the point out that it is doubtful that Vickers toughness values are true or valid, except from by chance.
    keywords: bending; bulk; crack; fracture; glass; gpa; hardness; indentation; modulus; sam2x5; samples; specimens; toughness; values; vickers
       cache: fumecheng-11506.pdf
  plain text: fumecheng-11506.txt

        item: #69 of 526
          id: fumecheng-11508
      author: Chen, Minjia; Luo, Xingqi; Chen, Wanbo; Feng, Jianjun; Wang, Xiaohang
       title: MIXED-FLOW PUMP OPTIMISATION AND FLOW CHARACTERISTICS BASED ON THE ‘DUAL CARBON’ GOALS
        date: 2025
       words: 7119
      flesch: 52
     summary: [19-21] conducted a multi-parameter optimisation design of the impeller and guide vane of mixed flow pumps using CFD technology. Figure 15 shows the pressure distribution of the impeller under design flow conditions and high flow conditions.
    keywords: blade; conditions; design; distribution; efficiency; energy; fig; flow; flow pump; guide; head; impeller; optimisation; performance; pressure; pump
       cache: fumecheng-11508.pdf
  plain text: fumecheng-11508.txt

        item: #70 of 526
          id: fumecheng-1153
      author: Manić, Miodrag; Stamenković, Zoran; Mitković, Milorad; Stojković, Miloš; Shephard, Duncan E.T.
       title: DESIGN OF 3D MODEL OF CUSTOMIZED ANATOMICALLY ADJUSTED IMPLANTS
        date: 2015
       words: 4272
      flesch: 48
     summary: Some examples of created 3D model of tibia‟s fracture are shown in Fig. The creation of geometrically accurate 3D models of human bones utilizes a number of different techniques and presents a unique challenge, because their geometry and form are very complex.
    keywords: bone; design; fig; fracture; implants; method; model
       cache: fumecheng-1153.pdf
  plain text: fumecheng-1153.txt

        item: #71 of 526
          id: fumecheng-11564
      author: Borlea, Anamaria-Ioana; Precup, Radu-Emil; Roman, Raul-Cristian
       title: DISCRETE-TIME MODEL-BASED SLIDING MODE CONTROLLERS FOR TOWER CRANE SYSTEMS
        date: 2023
       words: 6256
      flesch: 66
     summary: Direct relations that involve controller tuning parameters and control system performance indices with respect to both reference and disturbance inputs will be attempted to be derived in all controller designs. Preitl, Z., Precup, R.-E., Tar, J.K., Takács, M., 2006, Use of multi-parametric quadratic programming in fuzzy control systems, Acta Polytechnica Hungarica, 3(3), pp. 29-43. 28.
    keywords: control; control system; dtsmc; law; matrix; mode; parameters; position; step; system; time
       cache: fumecheng-11564.pdf
  plain text: fumecheng-11564.txt

        item: #72 of 526
          id: fumecheng-11587
      author: Nešić, Nikola; Cajić, Milan; Karličić, Danilo; Lazarević, Mihailo; Adhikari, Sondipon
       title: VIBRATION AND STABILITY OF A NONLINEAR NONLOCAL STRAIN-GRADIENT FG BEAM ON A VISCO-PASTERNAK FOUNDATION
        date: 2025
       words: 10665
      flesch: 51
     summary: Ansari, R., Gholami, R., Hosseini, K., Sahmani, S., 2011, A sixth-order compact finite difference method for vibrational analysis of nanobeams embedded in an elastic medium based on nonlocal beam theory, Mathematical and Computer Modelling, 54(11-12), pp. Therefore, this study can be considered as a special case and natural extension of the work done by Nešić et al. in [27] since a special case of the visco-Pasternak foundation model without fractional derivatives is adopted and stability of periodic solutions analysis is performed.
    keywords: amplitude; beam; conditions; fig; foundation; frequency; gradient; method; nonlinear; pasternak; solutions; stability; strain; theory; vibration
       cache: fumecheng-11587.pdf
  plain text: fumecheng-11587.txt

        item: #73 of 526
          id: fumecheng-11600
      author: Gorski, Filip; Komorowska, Olga; Zawadzki, Przemysław; Kuczko, Wiesław; Żukowska, Magdalena; Łabudzki, Remigiusz; Păcurar, Răzvan
       title: AUTOMATION OF DESIGN OF MODULAR UPPER LIMB PROSTHESES
        date: 2025
       words: 6456
      flesch: 47
     summary: Colombo, G., Bertetti, M., Bonacini, D., Magrassi, G., 2006, Reverse engineering and rapid prototyping techniques to innovate prosthesis socket design, Three-Dimensional Image Capture and Applications VII, 6056, pp. Amputation can occur at various levels, influencing treatment, rehabilitation, and prosthesis design [2-4].
    keywords: automation; cad; design; engineering; fig; forearm; limb; model; patient; process; prosthesis; variants
       cache: fumecheng-11600.pdf
  plain text: fumecheng-11600.txt

        item: #74 of 526
          id: fumecheng-11614
      author: Zivic, Fatima; Mitrovic, Slobodan; Todorovic, Petar; Adamovic, Dragan; Grujovic, Nenad; Spasic, Marko; Stojadinovic, Ivan
       title: MICROSTRUCTURE INFLUENCE ON FRICTION BEHAVIOR OF THE TI6AL4V BIOMEDICAL ALLOY AT LOW LOADS
        date: 2023
       words: 12602
      flesch: 54
     summary: Comprehensive review of wear mechanisms related to Ti6Al4V alloy, under different contact conditions, is given in [30]. Higher wear rate would be expected for 12 mm/s (with COF value of 2.7), but it was lower in comparison to the test at 4 mm/s.
    keywords: alloy; behavior; coefficient; cof; contact; fig; friction; influence; load; microstructure; sample; sliding; speed; surface; ti6al4v; values; wear
       cache: fumecheng-11614.pdf
  plain text: fumecheng-11614.txt

        item: #75 of 526
          id: fumecheng-11621
      author: Mei, Yuan; Tian, Xinyu; Li, Xuejuan; Gepreel, Khaled
       title: FRACTAL SPACE BASED DIMENSIONLESS ANALYSIS OF THE SURFACE SETTLEMENT INDUCED BY THE SHIELD TUNNELING
        date: 2023
       words: 5968
      flesch: 58
     summary: [T]: 1 2 3 5 6 7 1 3 5 7 8 112 2 2 2 2 2 2 2 2 0a a a a a a b b b b b b− − − − − − − − − − − − = (6) Lesur, G., Longaretti, P.Y., 2007, Impact of dimensionless numbers on the efficiency of magnetorotational instability induced turbulent transport, Monthly Notices of the Royal Notices of the Royal Astronomical Society, 378(4), pp. 1471-1480. 52.
    keywords: analysis; b b; dimensionless; engineering; number; process; settlement; shield; surface; tunneling; − −
       cache: fumecheng-11621.pdf
  plain text: fumecheng-11621.txt

        item: #76 of 526
          id: fumecheng-11687
      author: El-Dib, Yusry; Elgazery, Nasser S.; Alyousef, Haifa A.
       title: THE UP-GRATING RANK APPROACH TO SOLVE THE FORCED FRACTAL DUFFING OSCILLATOR BY NON- PERTURBATIVE TECHNIQUE
        date: 2024
       words: 7432
      flesch: 68
     summary: The current technique works on the operator, which is simple and effective when investigating fractal oscillators with external forces, easy to obtain analytic solutions, and doesn't lead to any mathematical difficulties. On the other hand, recent years have seen an increase in interest in mechanical engineering applications for fractal oscillators, as a subfield of vibration theory.
    keywords: fractal; u t; u u
       cache: fumecheng-11687.pdf
  plain text: fumecheng-11687.txt

        item: #77 of 526
          id: fumecheng-1170
      author: Dučić, Nedeljko; Ćojbašić, Žarko; Radiša, Radomir; Slavković, Radomir; Milićević, Ivan
       title: CAD/CAM DESIGN AND GENETIC OPTIMIZATION OF FEEDERS FOR SAND CASTING PROCESS
        date: 2016
       words: 3931
      flesch: 53
     summary: Sutaria et al. (2011) present a new approach to evaluating and optimizing casting feeding system design using feed-paths. Jacob et al. (2004) presented the integration of Genetic Algorithm (GA) and CAD in the design and optimization of feeders in casting process.
    keywords: casting; design; feeder; feeding; fig; optimization; process; sand; system; volume
       cache: fumecheng-1170.pdf
  plain text: fumecheng-1170.txt

        item: #78 of 526
          id: fumecheng-11718
      author: Aldeen, Ali W.; Mahdi, Dina Y.; Zhongwei, Chen; Disher, Imad A.; Mohamad, Barhm
       title: EFFECT OF ISOTHERMAL AND ISOCHRONAL AGING ON THE MICROSTRUCTURE AND PRECIPITATE EVOLUTION IN BETA-QUENCHED N36 ZIRCONIUM ALLOY
        date: 2025
       words: 6329
      flesch: 55
     summary: In comparison, the Ra of aging surface samples confirms a slight increase in roughness due to the precipitation of particles during the aging process. In this study, the effect of isothermal and isochronal aging is reported to investigate the precipitate evolution and recrystallization of N36 zirconium alloy after β-quenching.
    keywords: aging; alloy; fig; grain; microstructure; phase; quenching; recrystallization; samples; spps; time
       cache: fumecheng-11718.pdf
  plain text: fumecheng-11718.txt

        item: #79 of 526
          id: fumecheng-11849
      author: Rakić, Miomir; Žižović, Miodrag M.; Miljković, Boža; Njeguš, Angelina; Žižović, Mališa R.; Đorđević, Igor
       title: MULTI-CRITERIA SELECTION OF STANDARDS FOR SYSTEM ANALYST ACTIVITIES IN ORGANIZATIONS
        date: 2023
       words: 8057
      flesch: 53
     summary: 2 Example of diagram of cost calculation according to IDEF0 standard Given the criteria necessary for multi-criteria analysis [14, 15], the standard fully recognizes the elements related to objects (input, output, and internal), enables the identification of elements that control and manage the process, the structure of the process and description of process activities, participants in the process, and is easy to use. The chapter defines the criteria that cover IT activities for the selection of standards according to selected criteria and defined weight coefficients in the observed company.
    keywords: activities; business; criteria; data; decision; flow; method; model; organization; process; selection; standards; system
       cache: fumecheng-11849.pdf
  plain text: fumecheng-11849.txt

        item: #80 of 526
          id: fumecheng-11851
      author: Milić, Predrag; Marinković, Dragan; Ćojbašić, Žarko
       title: GEOMETRICALLY NONLINEAR ANALYSIS OF PIEZOELECTRIC ACTIVE LAMINATED SHELLS BY MEANS OF ISOGEOMETRIC FE FORMULATION
        date: 2025
       words: 8022
      flesch: 59
     summary: Nestorović, T., Marinković, D., Chandrashekar, G., Marinković, Z., Trajkov, M., 2012, Implementation of a user defined piezoelectric shell element for analysis of active structures, Finite Elements in Analysis and Design, 52, pp. 11-22. Rama, G., Marinković, D., Zehn, M., 2018, Efficient three-node finite shell element for linear and geometrically nonlinear analyses of piezoelectric laminated structures, Journal of Intelligent Material Systems and Structures, 29(3), pp, 345-357. 10.
    keywords: analysis; k k; nonlinear; piezoelectric; structures; t t
       cache: fumecheng-11851.pdf
  plain text: fumecheng-11851.txt

        item: #81 of 526
          id: fumecheng-11903
      author: Mzili, Toufik; Mzili, Ilyass; Riffi, Mohammed Essaid; Pamucar, Dragan; Simic, Vladimir; Kurdi, Mohamed
       title: A NOVEL DISCRETE RAT SWARM OPTIMIZATION ALGORITHM FOR THE QUADRATIC ASSIGNMENT PROBLEM
        date: 2023
       words: 9782
      flesch: 48
     summary: Future research opportunities for the DRSO algorithm include incorporating additional heuristics or metaheuristics to improve performance, expanding its applicability to larger instances or other combinatorial optimization problems, and studying its behavior in greater detail to understand its strengths and limitations. However, in discrete optimization problems, these operators cannot be used in the same way because they are designed for continuous scenarios.
    keywords: algorithm; assignment; assignment problem; discrete; drso; instances; optimization; optimization algorithm; problem; qap; rat; search; solution; swarm; time
       cache: fumecheng-11903.pdf
  plain text: fumecheng-11903.txt

        item: #82 of 526
          id: fumecheng-11904
      author: Mzili, Toufik; Mzili, Ilyass; Riffi, Mohammed Essaid; Pamucar, Dragan; Simic, Vladimir; Abualigah, Laith; Almohsen, Bandar
       title: HYBRID GENETIC AND PENGUIN SEARCH OPTIMIZATION ALGORITHM (GA-PSEOA) FOR EFFICIENT FLOW SHOP SCHEDULING SOLUTIONS
        date: 2024
       words: 9511
      flesch: 52
     summary: In Table 4, 5, 6, and 7, we present a comparison between GA-PSeOA and other methods. The following section presents a comprehensive comparison of various algorithms, including the Hybrid Genetic Algorithm and Penguin Search Algorithm (GA-PSeOA), on distinct instances and complexities of scheduling problems.
    keywords: algorithm; flow; fssp; hybrid; instances; mzili; objective; optimization; penguin; problem; pseoa; scheduling; search; shop; solution
       cache: fumecheng-11904.pdf
  plain text: fumecheng-11904.txt

        item: #83 of 526
          id: fumecheng-11924
      author: Ilgamov, Marat A.; Aitbaeva, Aigul A.; Pavlov, Igor S.; Dmitriev, Sergey V.
       title: CARBON NANOTUBE UNDER PULSED PRESSURE
        date: 2024
       words: 7891
      flesch: 65
     summary: For (n, 0) CNTs with n > 15, in the regime of small-amplitude vibrations, the discrepancy between the continuum model and molecular dynamics calculations does not exceed 5% and decreases with increasing n. Key words: Carbon nanotube, Molecular dynamics, Shell theory, Pulsed pressure, Natural frequencies Received: August 20, 2023 / Corresponding author: Sergey V. Dmitriev Institute of Molecule and Crystal Physics, UFRC RAS, Oktyabrya Ave. 71, 450054 Ufa, Russia E-mail: dmitriev.sergey.v@gmail.com https://orcid.org/0000-0002-8766-8964 https://orcid.org/0000-0002-4735-1671 https://orcid.org/0000-0002-2666-4943 https://orcid.org/0000-0002-6744-4445 276 M. A. ILGAMOV, A. A. AITBAEVA, I. S. PAVLOV, S. V. DMITRIEV 1. INTRODUCTION Free and forced vibrations of carbon nanotubes (CNTs) have been analyzed in a number of studies [1-13] because they affect the operation of nano-devices such as sensors, actuators, etc.
    keywords: carbon; cnt; dmitriev; dynamics; fig; harmonic; nanotube; pressure; ring; time
       cache: fumecheng-11924.pdf
  plain text: fumecheng-11924.txt

        item: #84 of 526
          id: fumecheng-11935
      author: Xu, De-Yu; Cui, Hong-Qing; Wang, Tian-Yu; Fu, Jiang-Wei; Zhu, Guang-Bo
       title: INTERACTIONS AND INFLUENCES ON COAL MINERS' SAFETY ATTENTION: AN EVALUATION USING IMPROVED DEMATEL-ISM
        date: 2024
       words: 6370
      flesch: 48
     summary: Analysis of practical implications from influencing factors Hierarchy is often employed as a critical technique in analyzing influencing factors and forms an integral foundation in safety management. Table 4 Driving force values and dependence values of influencing factors Influencing factor Driving force Dependence S1 5 9 S2 4 10 S3 1 11 S4 1 11 S5 1 11 S6 6 1 S7 6 1 S8 7 3 S9 6 7 S10 3 1 S11 3 1 S12 7 3 S13 8 2 S14 6 2 S15 10 1 148 D.Y. XU, H.Q. CUI, T.Y. WANG, J.W. FU, G.B. ZHU Fig.
    keywords: attention; coal; driving; factors; influence; level; matrix; miners; safety
       cache: fumecheng-11935.pdf
  plain text: fumecheng-11935.txt

        item: #85 of 526
          id: fumecheng-11955
      author: Arasteh, Bahman; Bouyer, Asgarali; Ghanbarzadeh, Reza; Rouhi, Alireza; Nazeri Mehrabani, Mahsa; Tirkolaee, Erfan Babaee
       title: DATA REPLICATION IN DISTRIBUTED SYSTEMS USING OLYMPIAD OPTIMIZATION ALGORITHM
        date: 2023
       words: 12181
      flesch: 57
     summary: Tu, M., Yen, I. L., 2014, Distributed replica placement algorithms for correlated data, The Journal of Supercomputing, 68(11), pp. 245-273. 13. To address the problems of placement and replacement of data replicas within distributed systems, the current study proposes a novel discrete optimizer algorithm.
    keywords: access; algorithm; data; data items; fig; gwa; items; methods; ooa; optimization; performance; placement; problem; pso; replica; servers; sfla; systems; time; toc
       cache: fumecheng-11955.pdf
  plain text: fumecheng-11955.txt

        item: #86 of 526
          id: fumecheng-11963
      author: Abdelhussien, Abdelsalam; Yang, Guolai; Hussein, Emad Kamil; Li, Lei; Al-Abboodi, Hamid; Mohamad, Barhm
       title: ANALYSIS OF THE MECHANICAL CHARACTERISTICS OF DATE SEED POWDER-BASED COMPOSITE CARBON FIBER REINFORCED POLYMERS
        date: 2025
       words: 4985
      flesch: 52
     summary: The best variation of the reinforcement of carbon fiber reinforced epoxy with the date seed granules is the GFR-15-25% wt. GDS composition, according to observations made regarding the mechanical properties of carbon fiber reinforced epoxy resin reinforced with 35, 25, and 15 and 0% wt. GDS. This study reveals that carbon fiber-date seed-reinforced composites are excellent substitutes for carbon fiber composites since they offer better mechanical properties at a lower cost.
    keywords: carbon; carbon fiber; composites; date; epoxy; fiber; fig; materials; matrix; properties; seed; strength; test
       cache: fumecheng-11963.pdf
  plain text: fumecheng-11963.txt

        item: #87 of 526
          id: fumecheng-11966
      author: Bhowmik, Chiranjib; Zindani, Divya; Chatterjee, Prasenjit; Marinkovic, Dragan; Šliogerienė, Jūratė
       title: EVALUATION OF GREEN ENERGY SOURCES: AN EXTENDED FUZZY-TODIM APPROACH BASED ON SCHWEIZER-SKLAR AND POWER AVERAGING OPERATORS
        date: 2025
       words: 11244
      flesch: 47
     summary: Renewable energy sources do not produce the same level of carbon emissions as fossil fuels, which are a major contributor to climate change. The ranking of renewable energy sources in Canada has been investigated 630 C. BHOWMIK, D. ZINDANI, P. CHATTERJEE, D. MARINKOVIC, J ŠLIOGERIENĖ by Nigim et al.
    keywords: alternatives; approach; cost; criteria; decision; energy; energy sources; evaluation; f f; g f; g p; green; making; method; p f; p p; power; selection; solar
       cache: fumecheng-11966.pdf
  plain text: fumecheng-11966.txt

        item: #88 of 526
          id: fumecheng-11979
      author: Božanić, Darko; Epler, Igor; Puška, Adis; Biswas, Sanjib; Marinković, Dragan; Koprivica, Stefan
       title: APPLICATION OF THE DIBR II – ROUGH MABAC DECISION-MAKING MODEL FOR RANKING METHODS AND TECHNIQUES OF LEAN ORGANIZATION SYSTEMS MANAGEMENT IN THE PROCESS OF TECHNICAL MAINTENANCE
        date: 2024
       words: 10889
      flesch: 59
     summary: Existing technological TM documentation for the most of the SPTS is “poor” regarding maintenance process management. The authors deem that Lean maintenance management, with its principles and methods, can provide good solutions, applicable in the practice of facility maintenance.
    keywords: coefficients; criteria; decision; maintenance; making; management; method; model; n w; ranking; step; w w; weight
       cache: fumecheng-11979.pdf
  plain text: fumecheng-11979.txt

        item: #89 of 526
          id: fumecheng-11987
      author: Deivanayagampillai, Nagarajan; Jacob, Kavikumar; Vellapalayam Manohar, Gobinath; Broumi, Said
       title: INVESTIGATION OF INDUSTRY 5.0 HURDLES AND THEIR MITIGATION TACTICS IN EMERGING ECONOMIES BY TODIM ARITHMETIC AND GEOMETRIC AGGREGATION OPERATORS IN SINGLE VALUE NEUTROSOPHIC ENVIRONMENT
        date: 2023
       words: 14335
      flesch: 47
     summary: Industry 5.0 is designed to link and converse with a variety of systems from other industries as well as a variety of people. Despite important fields like hotels, training, medical services and pharmaceuticals, power generation, and human- centric viewpoints being examined in relation to the implementation and influence of Industry 5.0 from a scientific viewpoint, to our understanding none of the researches was concentrated on barriers that industries can inevitably experience while incorporating Industry 5.0 [23].
    keywords: barriers; criteria; data; decision; future; group; human; industry; journal; making; manufacturing; method; mitigation; multi; neutrosophic; obstacles; robots; security; sets; study; systems; technology; todim
       cache: fumecheng-11987.pdf
  plain text: fumecheng-11987.txt

        item: #90 of 526
          id: fumecheng-11997
      author: Boujelbene, Mohamed; Mehryan, Seyed A.M.; Sheremet, Mikhail; Shahabadi, Mohammad; Elbashir, Nasrin B.M.; Ghalambaz, Mohammad
       title: NUMERICAL STUDY OF A NON-NEWTONIAN PHASE CHANGE FLOW IN FINNED RECTANGULAR ENCLOSURES
        date: 2025
       words: 8004
      flesch: 59
     summary: 16 Dependency of Nutotal on n for the cavity: (a) without fins, (b) with one fin, (c) with two fins, and (d) with three fins 7. CONCLUSIONS Numerical analysis of non-Newtonian PCM convective melting in a differentially- heated cavity with solid fins has been performed. Farahani, S.D., Farahani, A.D., Tayebzadeh, F., Mosavi, A.H., 2021, Melting of non-Newtonian phase change material in a finned triple-tube: Efficacy of non-uniform magnetic field, Case Studies in Thermal Engineering, 28, 101543.
    keywords: cavity; change; fins; flow; heat; liquid; melting; newtonian; pcm; phase; study; time
       cache: fumecheng-11997.pdf
  plain text: fumecheng-11997.txt

        item: #91 of 526
          id: fumecheng-12002
      author: Liović, David; Franulović, Marina; Ferlič, Luka; Gubeljak, Nenad
       title: SURFACE ROUGHNESS OF Ti6Al4V ALLOY PRODUCED BY LASER POWDER BED FUSION
        date: 2024
       words: 7109
      flesch: 54
     summary: [36, 37], which would influence surface roughness values differently [9]. Thus, in the literature, wide ranges of resulting average surface roughness values of L-PBF Ti6Al4V specimens have been reported by different groups of authors
    keywords: alloy; laser; model; parameters; pbf; powder; process; scanning; specimens; surface; surface roughness; ti6al4v; values
       cache: fumecheng-12002.pdf
  plain text: fumecheng-12002.txt

        item: #92 of 526
          id: fumecheng-12003
      author: Hasnain, Jafar
       title: COMPARATIVE ANALYSIS OF THERMAL PERFORMANCE OF TWO BASE LIQUIDS HAVING TRI-HYBRIDIZED NANOMATERIALS IN A VERTICAL CHANNEL UNDER HALL EFFECTS
        date: 2024
       words: 6144
      flesch: 68
     summary: [8] investigated the behavior of base fluid due to the dispersion of three different nanomaterials in a stretchable channel with heat source and sink phenomena. [14] discussed the micropolar nano liquid in the presence of heat source as well as heat sink phenomena and inclined Lorentz force between vertical plates.
    keywords: heat;  ;  ;  ;  
       cache: fumecheng-12003.pdf
  plain text: fumecheng-12003.txt

        item: #93 of 526
          id: fumecheng-12018
      author: Bošković, Sara; Jovčić, Stefan; Simic, Vladimir; Švadlenka, Libor; Dobrodolac, Momčilo; Bacanin, Nebojša
       title: A NEW CRITERIA IMPORTANCE ASSESSMENT (CIMAS) METHOD IN MULTI-CRITERIA GROUP DECISION-MAKING: CRITERIA EVALUATION FOR SUPPLIER SELECTION
        date: 2025
       words: 6316
      flesch: 54
     summary: In the next section, given the noticeable similarity between the two methods, the paper’s authors coupled the newly proposed method with the CRITIC one to obtain hybrid criteria weights that should be utilized further in decision-making. Sharifi, H., Shahram, H., Milaghardan, A., Esmaeily, A., Mojaradi, B., Naseri, F., 2012, Forest fire hazard modeling using hybrid AHP and fuzzy AHP methods using MODIS sensor, Proc. 2012 IEEE International Geoscience and Remote Sensing Symposium, Munich, pp.
    keywords: assessment; cimas; criteria; critic; decision; experts; importance; making; method; weights
       cache: fumecheng-12018.pdf
  plain text: fumecheng-12018.txt

        item: #94 of 526
          id: fumecheng-12027
      author: Gül, Alize Yaprak; Cakmak, Emre; Karakas, Atiye Ece
       title: DRONE SELECTION FOR FOREST SURVEILLANCE AND FIRE DETECTION USING INTERVAL VALUED NEUTROSOPHIC EDAS METHOD
        date: 2025
       words: 13504
      flesch: 58
     summary: Regarding the drone selection problem, Hristozov and Zlateva [7] introduced a performance mapping model as a concept model for drone selection in specific disaster conditions to aid the drone selection decision process. Hristozov, S., Zlateva, P., 2018, Concept model for drone selection in specific disaster conditions, International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42, pp.
    keywords: criteria; detection; drone; fire; forest; ivn; method; neutrosophic; selection; − 𝐹; − 𝑇; 𝐹 𝐿; 𝐹 𝑈; 𝐼 𝐿; 𝐼 𝑈; 𝐿 𝑁(𝑥; 𝐿 𝑎; 𝐿 𝑏; 𝐿 𝑖𝑗𝑘; 𝐿 𝑘; 𝑇 𝐿; 𝑇 𝑈; 𝑈 𝑁(𝑥; 𝑈 𝑎; 𝑈 𝑏; 𝑈 𝑖𝑗𝐴; 𝑈 𝑘
       cache: fumecheng-12027.pdf
  plain text: fumecheng-12027.txt

        item: #95 of 526
          id: fumecheng-12032
      author: Makajić-Nikolić, Dragana; Stanojević, Milan; Nikolić, Nebojša; Pavlović, Petar
       title: OPTIMIZATION BASED DETERMINATION OF THE SET OF CONTINUOUS-STATE COMPONENTS CRITICAL TO THE MECHANICAL SYSTEM STATE
        date: 2024
       words: 6121
      flesch: 57
     summary: GI of component j is obtained as: jGI j pl I pl   (6) where jpl is the change in system state caused by the change in jth component state. Wu S., Coolen, F., 2013, A cost-based importance measure for system components: An extension of the Birnbaum importance, European Journal of Operational Research, 225(1), pp.
    keywords: components; importance; j j; performance; problem; reliability; set; state; system
       cache: fumecheng-12032.pdf
  plain text: fumecheng-12032.txt

        item: #96 of 526
          id: fumecheng-12037
      author: Wang, Peng; Zhu, Baoying; Yu, Yang; Ali, Zeeshan; Almohsen, Bandar
       title: COMPLEX INTUITIONISTIC FUZZY DOMBI PRIORITIZED AGGREGATION OPERATORS AND THEIR APPLICATION FOR RESILIENT GREEN SUPPLIER SELECTION
        date: 2023
       words: 10145
      flesch: 68
     summary: j j j j rp ip rp ip j m m n n j j j j −     = and ((max ,max ), j j rp ip j m m j j +   = (min ,min )) j j rp ip n n j j   , then 1 2( , , , )CIF CIF CIF j z jCIFDPA− +       (18) Complex Intuitionistic Fuzzy Dombi Prioritized Aggregation Operators and Their Application for... 349 Proof: Select the theory in Proposition 1 and Proposition 2; we have 1 2 1 2( , , , ) ( , , , )CIF CIF CIF z z jCIFDPA CIFDPA + + + +         j j j j rp ip rp ip j m m n n j j j j −     = and m ),(( ax ,max j j rp ip j m m j j +   = (min ,min )) j j rp ip n n j j   , then 1 2( , , , )CIF CIF CIF j z jCIFWDPA− +       (23) 4.
    keywords: cif cif; ip j; j cif; j j; j rp; j z; m j; n j; rp ip; η j;  ;  
       cache: fumecheng-12037.pdf
  plain text: fumecheng-12037.txt

        item: #97 of 526
          id: fumecheng-12053
      author: Nikolić, Filip; Čanađija, Marko
       title: MACHINE LEARNING OF STRUCTURE – PROPERTY RELATIONSHIPS: AN APPLICATION TO HEAT GENERATION DURING PLASTIC DEFORMATION
        date: 2025
       words: 7996
      flesch: 54
     summary: Furthermore, it was observed that the level of plastic deformation is significantly lower within the elements to which hard phase material properties are assigned, Fig. Only a fraction of the RVEs deviate from this specific zone, especially those corresponding to a very small amount of hard phase fractions.
    keywords: fig; heat; increase; learning; model; phase; plastic; strain; temperature; tqc
       cache: fumecheng-12053.pdf
  plain text: fumecheng-12053.txt

        item: #98 of 526
          id: fumecheng-12066
      author: Radovanović, Marko; Božanić, Darko; Tešić, Duško; Puška, Adis; Hezam, Ibrahim M.; Jana, Chiranjibe
       title: APPLICATION OF HYBRID DIBR-FUCOM-LMAW-BONFERRONI-GREY-EDAS MODEL IN MULTICRITERIA DECISION-MAKING
        date: 2023
       words: 6799
      flesch: 57
     summary: Grey EDAS method FUCOM method The FUCOM method is one of the newer methods.
    keywords: application; coefficients; criteria; decision; dibr; edas; fucom; grey; lmaw; making; method; model; selection; table; weight
       cache: fumecheng-12066.pdf
  plain text: fumecheng-12066.txt

        item: #99 of 526
          id: fumecheng-12081
      author: Brautigam, András; Szalai, Szabolcs; Fischer, Szabolcs
       title: INVESTIGATION OF THE APPLICATION OF AUSTENITIC FILLER METALS IN PAVED TRACKS FOR THE REPAIR OF THE RUNNING SURFACE DEFECTS OF RAILS CONSIDERING FIELD TESTS
        date: 2023
       words: 9836
      flesch: 55
     summary: These techniques are intended to reduce flock sensitivity while increasing rail track hardness. The above study confirms that there has been a lot of research on rail hardnesses and their interactions with railway wheels, but no studies have shown the application of austenitic filler materials on the rails' running surfaces.
    keywords: fig; filler; hardness; layer; rail; railway; repair; running; steel; surface; track; values; wear; welding; welds; wheel
       cache: fumecheng-12081.pdf
  plain text: fumecheng-12081.txt

        item: #100 of 526
          id: fumecheng-12087
      author: Biswas, Sanjib; Božanić, Darko; Pamučar, Dragan; Marinković, Dragan
       title: A SPHERICAL FUZZY BASED DECISION MAKING FRAMEWORK WITH EINSTEIN AGGREGATION FOR COMPARING PREPAREDNESS OF SMEs IN QUALITY 4.0
        date: 2023
       words: 12238
      flesch: 62
     summary: Shuaib, K.M., He, Z., 2021, Impact of organizational culture on quality management and innovation practices among manufacturing SMEs in Nigeria, Quality Management Journal, 28(2), pp.   = − − − − − −    w w w wwS      (5) Power of SFN Let w > 0 denotes the power of S wherein w is a scalar quantity.
    keywords: analysis; criteria; decision; framework; fuzzy; k k; management; matrix; quality; smes; table
       cache: fumecheng-12087.pdf
  plain text: fumecheng-12087.txt

        item: #101 of 526
          id: fumecheng-12096
      author: Mishra, Arunodaya Raj; Rani, Pratibha; Cavallaro, Fausto; Alrasheedi, Adel Fahad
       title: ASSESSMENT OF SUSTAINABLE WASTEWATER TREATMENT TECHNOLOGIES USING INTERVAL-VALUED INTUITIONISTIC FUZZY DISTANCE MEASURE-BASED MAIRCA METHOD
        date: 2023
       words: 13808
      flesch: 65
     summary: − − − −              (3) 1 1 1 1 1 ( ) , ( ) , 1 (1 ) , 1 (1 ) . − − − −              (4) Definition 2.5
    keywords: + −; criteria; decision; q r; treatment; wastewater; wwtt; − +; − −;  ;  ;  ;  
       cache: fumecheng-12096.pdf
  plain text: fumecheng-12096.txt

        item: #102 of 526
          id: fumecheng-1210
      author: Kumar, Mahesh
       title: EXPERIMENTAL FORCED SOLAR THIN LAYER GINGER DRYING
        date: 2016
       words: 4633
      flesch: 63
     summary: The quality of dried ginger was improved and the drying time was observed to be reduced by 66.7% against OSD. Phoungchandang, S., Saentaweesuk, S., 2011, Effect of two stage, tray and heat pump assisted- dehumidified drying on drying characteristics and qualities of dried ginger, Food and Bioproducts Processing, 89(4), pp.
    keywords: coefficients; collector; convective; dryer; drying; ginger; heat; transfer
       cache: fumecheng-1210.pdf
  plain text: fumecheng-1210.txt

        item: #103 of 526
          id: fumecheng-12107
      author: Kuang, Minghui; Safa, Ramin; Edalatpanah, Seyyed Ahmad; Keyser, Robert S.
       title: A HYBRID DEEP LEARNING APPROACH FOR SENTIMENT ANALYSIS IN PRODUCT REVIEWS
        date: 2023
       words: 9637
      flesch: 47
     summary: Prusa, J., Khoshgoftaar, T.M., Dittman, D.J., Napolitano, A., 2015, Using random undersampling to alleviate class imbalance on tweet sentiment data, In 2015 IEEE International Conference on Information Reuse And Integration, pp. 197-202, San Francisco, CA, USA, IEEE. In this study, we propose a novel hybrid approach based on deep neural networks (DNNs) for sentiment analysis in product reviews, focusing on the classification of sentiments expressed.
    keywords: algorithm; analysis; approach; attention; classification; data; dataset; facebook; marketing; media; product; rnn; samples; sentiment; sentiment analysis; text; words
       cache: fumecheng-12107.pdf
  plain text: fumecheng-12107.txt

        item: #104 of 526
          id: fumecheng-12108
      author: Moory Shirbani, Meisam; Alavi, Sayed Ehsan
       title: MULTI-OBJECTIVE OPTIMIZATION AND PERFORMANCE ANALYSIS OF BIMORPH MAGNETO-ELECTRO-ELASTIC ENERGY HARVESTERS
        date: 2025
       words: 7534
      flesch: 54
     summary:       =   = =  − +  =        + + + −       − + − +           (26) 2( ) ( ) ( ) ( , ) ( ) c M EM E rel r MM r R j L V t V t w x t W x j    + − = (27) where the parameters nME and nEM represent the ratios of VM(t) to VE(t) and vice versa, respectively, have been obtained as follows: 31 31 31 31 1 ( ) ( ) 1 ( ) ( ) M E M M M C M EM R EM ME M M EM E M ME M c f NR j C j e RV n n V j f NR e R j L           + −     = = =  − +  (28) Finally, by having the expressions for VE(t) and VM(t), the analytical relationships for the harvested electrical power PE(t), the harvested magnetic power PM(t), and the total harvested magneto-electric power PME(t) by the MEE energy harvesting beam can be obtained. Wei, C., Jing, X., 2017, A comprehensive review on vibration energy harvesting: modelling and realization, Renewable and Sustainable Energy Reviews, 74, pp. 1-18. 2.
    keywords: connection; energy; h h; mee; optimization; parallel; power; r r; series
       cache: fumecheng-12108.pdf
  plain text: fumecheng-12108.txt

        item: #105 of 526
          id: fumecheng-12109
      author: Sankhla, Arvind; Patel, Kaushik; Makhesana, Mayur; Patel, Anand; Gupta, Kapil
       title: INVESTIGATIONS ON THE INFLUENCE OF LASER SURFACE TREATMENT ON HARDNESS AND WEAR BEHAVIOUR OF AL-MMC PREPARED THROUGH POWDER METALLURGY ROUTE
        date: 2024
       words: 7290
      flesch: 59
     summary: Therefore, the current work investigates the impact of SiC particle addition and laser surface treatment on the hardness and wear characteristics of aluminium metal matrix composite (Al-MMC). Pin-on-disk wear tests were performed on MMC samples before and after laser processing to determine the effect of laser surface treatment.
    keywords: hardness; laser; laser treatment; materials; matrix; metal; mmc; particles; sic; surface; treatment; wear
       cache: fumecheng-12109.pdf
  plain text: fumecheng-12109.txt

        item: #106 of 526
          id: fumecheng-12124
      author: Poliakov, Aleksandr; Pakhaliuk, Vladimir
       title: IN SILICO ANALYSIS OF AN ARTICULAR CARTILAGE REGENERATIVE REHABILITATION UNDER CONDITIONS OF MESENCHYMAL STEM CELLS IMPLANTATION AND THEIR MECHANICAL STIMULATION
        date: 2024
       words: 10089
      flesch: 47
     summary: r   = + − = , (11) where r is the number of mathematical model variable parameters. Thus, the task is to determine the set of model parameters at which the highest density of ECM (m), chondrocytes (CC) and MSC (CS) on the articular surface in the area of the defect is achieved over a certain period of time.
    keywords: c c; cartilage; cells; defect; density; ecm; model; msc; parameters; rehabilitation; tissue
       cache: fumecheng-12124.pdf
  plain text: fumecheng-12124.txt

        item: #107 of 526
          id: fumecheng-12145
      author: Phiri, Resego; Rangappa, Sanjay Mavinkere; Siengchin, Suchart; Marinkovic, Dragan
       title: AGRO-WASTE NATURAL FIBER SAMPLE PREPARATION TECHNIQUES FOR BIO-COMPOSITES DEVELOPMENT: METHODOLOGICAL INSIGHTS
        date: 2023
       words: 12181
      flesch: 44
     summary: This study aims to provide a comprehensive assessment of the various extraction and modification techniques employed for natural fibers. Additionally, the paper explores chemical and physical treatments, highlighting how each method influences the structure and properties of natural fibers.
    keywords: agro; bio; bleaching; chemical; composites; effect; extraction; fibers; harvesting; materials; modification; natural; plant; process; properties; retting; surface; techniques; treatment; waste; water
       cache: fumecheng-12145.pdf
  plain text: fumecheng-12145.txt

        item: #108 of 526
          id: fumecheng-12155
      author: Fischer, Szabolcs
       title: EVALUATION OF INNER SHEAR RESISTANCE OF LAYERS FROM MINERAL GRANULAR MATERIALS
        date: 2023
       words: 11278
      flesch: 48
     summary:  the application of used railway ballast material (i.e., mainly from crushed stone) that is not exclusively sharp-edged; the use of dry, wet, and oily state materials;  testing of new and recycled granular mixtures; measurement of different granular mixtures;  investigation of layer structures on foundations (bases) with different load-bearing capacity values; use of different granular layer thicknesses; use of additional geosynthetics with different characteristics; performing vertical load on the top surface of the above layer; performing dynamic tests;  application of DEM and/or FEM-DEM considering static and dynamic loads. The CGM1 type granular protection layer material was mixed in the laboratory, except for 0/1 mm fraction (sand); every fraction was transported from the same quarry as CSBCG 0/56 and RB.
    keywords: accuracy; engineering; geogrid; layers; load; materials; parameters; plane; railway; reinforcement; resistance; results; shear; shearing; test; track; transport; transportation; values
       cache: fumecheng-12155.pdf
  plain text: fumecheng-12155.txt

        item: #109 of 526
          id: fumecheng-12156
      author: Zamfirache, Iuliu Alexandru; Precup, Radu-Emil; Petriu, Emil M.
       title: Q-LEARNING, POLICY ITERATION AND ACTOR-CRITIC REINFORCEMENT LEARNING COMBINED WITH METAHEURISTIC ALGORITHMS IN SERVO SYSTEM CONTROL
        date: 2023
       words: 6326
      flesch: 53
     summary: Tomescu, M.L., Preitl, S., Precup, R.-E., Tar, J.K., 2007, Stability analysis method for fuzzy control systems dedicated controlling nonlinear processes, Acta Polytechnica Hungarica, 4(3), pp. A sample of control system response is illustrated in Fig.
    keywords: actor; algorithm; control; critic; fig; gwo; learning; optimization; policy; reinforcement; system
       cache: fumecheng-12156.pdf
  plain text: fumecheng-12156.txt

        item: #110 of 526
          id: fumecheng-12159
      author: Skripnyak, Vladimir A.; Chirkov, Maxim; Skripnyak, Evgeniya; Skripnyak, Vladimir V.
       title: MECHANICAL RESPONSE OF LAYERED STRUCTURES WITH INTERNAL LAYERS FROM METAMATERIALS EXPOSED TO DYNAMIC LOADINGS
        date: 2024
       words: 5619
      flesch: 45
     summary: Fig. 2 (c) shows the time changes in equivalent stresses in the zone with the maximum diameter of pentamode metamaterial frame element (curves (1), (3)) and in the joint zone of the frame elements (curves (2), (4)). These frequencies must satisfy the condition: fcycl > 0.25 vz (amp)/[H – m/(ρcF)], where H is the thickness of metamaterial interlayer, m is the mass of metamaterial interlayer, ρc is the mass density of material of metamaterial frame element, F if the square of metamaterial volume projection onto the base plate.
    keywords: elements; fig; frame; interlayer; layer; loading; metamaterial; plate; results; skripnyak; structures; time
       cache: fumecheng-12159.pdf
  plain text: fumecheng-12159.txt

        item: #111 of 526
          id: fumecheng-12160
      author: Ha, Heebo; Qaiser, Nadeem; Yun, Tae Gwang; Cheong, Jun Young; Lim, Sooman; Hwang, Byungil
       title: SENSING MECHANISM AND APPLICATION OF MECHANICAL STRAIN SENSOR: A MINI-REVIEW
        date: 2023
       words: 9802
      flesch: 51
     summary: This paper explains the basic concept of strain sensors that can convert mechanical deformation into electrical signals. Various types of strain sensors exist, including fiber Bragg gratings [47], triboelectric sensors
    keywords: composites; graphene; materials; performance; sensing; sensors; strain; strain sensors; stretchable; wang
       cache: fumecheng-12160.pdf
  plain text: fumecheng-12160.txt

        item: #112 of 526
          id: fumecheng-12165
      author: Elmoghazy, Yasser Hamed; Safaei, Babak; Sahmani, Saeid
       title: FINITE ELEMENT ANALYSIS FOR DYNAMIC RESPONSE OF VISCOELASTIC SANDWICHED STRUCTURES INTEGRATED WITH ALUMINUM SHEETS
        date: 2023
       words: 8628
      flesch: 59
     summary: In harmonic analysis, resonance frequency is obtained based on mode superposition method to evaluate the steady-state response of VE sandwich beam via maximum deformation. Lewandowski and Baum [19] developed mixed model to anticipate the free vibration response of VE sandwich beam using virtual work principle and VE Zener model.
    keywords: beam; element; factor; frequency; loss; sandwich; sandwich beam; structures; ve sandwich; viscoelastic; 𝑒 𝑇
       cache: fumecheng-12165.pdf
  plain text: fumecheng-12165.txt

        item: #113 of 526
          id: fumecheng-12201
      author: Zhang, Jian-Gang; Song, Qing-Ru; Zhang, Jian-Qiang; Wang, Fang
       title: APPLICATION OF HE’S FREQUENCY FORMULA TO NONLINEAR OSCILLATORS WITH GENERALIZED INITIAL CONDITIONS
        date: 2023
       words: 4281
      flesch: 57
     summary: This paper paves a novel way for engineers to use the formulation to study nonlinear vibration system with ease and reliability. In the realm of mechanical engineering, nonlinear vibration systems are omnipresent, encompassing nano-scale vibrations [1], atomic-level lattice vibrations [2], and microelectromechanical systems [3,4], among others.
    keywords: r t; t t; t −; − −
       cache: fumecheng-12201.pdf
  plain text: fumecheng-12201.txt

        item: #114 of 526
          id: fumecheng-12301
      author: Smolin, Alexey; Eremina, Galina
       title: MODELING OSTEOCYTE UNDER SHOCK-WAVE THERAPEUTIC LOADING
        date: 2024
       words: 5853
      flesch: 46
     summary: This study aims to study numerically the effects of low-energy shock wave therapy at different intensities on the mechanical response of a single osteocyte, the principal bone cell that corresponds to microscale of bone tissue. Further, under the action of external mechanical loads (which are always present due to physiological activity) in the connective tissue, there is a differentiation of cells into osteoblasts and fibroblasts, which are the basis for bone synthesis: the main cells of bone tissue—osteocytes, collagen, and extracellular matrix.
    keywords: bone; cells; fig; fluid; implant; loading; model; osseointegration; osteocyte; shock; therapy; tissue; wave
       cache: fumecheng-12301.pdf
  plain text: fumecheng-12301.txt

        item: #115 of 526
          id: fumecheng-12315
      author: Mirzaev, Ibrakhim; Sagdiev, Khamidulla; Yuvmitov, Anvar; Turdiev, Malikjon; Egamberdiev, Bakhtiyorjon
       title: EXPERIMENTAL DETERMINATION OF DYNAMIC COEFFICIENT OF AMONTON-COULOMB DRY FRICTION
        date: 2024
       words: 5890
      flesch: 53
     summary: The purpose of the study is to experimentally determine the dynamic coefficient of dry friction between different materials under vibrations due to the initial deflection. The principle of dry friction between the grillage and the foundation is used for the seismic isolation of buildings and structures.
    keywords: coefficient; friction; plate; shaking; sliding; steel; system; upper
       cache: fumecheng-12315.pdf
  plain text: fumecheng-12315.txt

        item: #116 of 526
          id: fumecheng-12347
      author: Alberti, Fabio; D'Andrea, Danilo; Macor, Alarico; Risitano, Giacomo; Rosseti, Antonio; Sedmak, Aleksandar
       title: NOVEL SMART DESIGN OF REAR HALF SHAFT OF LARGE URBAN TRANSPORT VEHICLE
        date: 2024
       words: 5532
      flesch: 56
     summary: Future work should focus on developing and testing components that can endure the demands of Power Split transmissions. This approach allows for a more refined assessment of fatigue damage, particularly in automotive components subjected to complex load profiles.
    keywords: cycle; damage; design; fatigue; fig; half; load; power; shaft; split; stress; transmission; urban; vehicle
       cache: fumecheng-12347.pdf
  plain text: fumecheng-12347.txt

        item: #117 of 526
          id: fumecheng-12351
      author: Nosonovsky, Michael; Aglikov, Aleksandr S.
       title: TRIBOINFORMATICS: MACHINE LEARNING METHODS FOR FRICTIONAL INSTABILITIES
        date: 2024
       words: 5215
      flesch: 51
     summary: The most common case of frictional elastic instabilities are the so- called Adams instabilities, which arise during frictional sliding of two elastic half-spaces with different elastic properties (i.e., with the elastic moduli E1 and E2, densities 1 and 2, and Poisson’s ratios 1 and 2) pressed together by a normal force per area, W, applied at infinity (Fig. 2a). Frictional elastic instabilities emerge also during sliding of a periodic wavy elastic surface against a flat elastic half-space
    keywords: friction; instabilities; methods; motion; sliding; slip; stability; surface; system
       cache: fumecheng-12351.pdf
  plain text: fumecheng-12351.txt

        item: #118 of 526
          id: fumecheng-12378
      author: Zheng, Jiyu; Wang, Longkang
       title: EXPERIMENTAL STUDY ON CREEP LOADING OF POROUS COAL UNDER DIFFERENT INFLUENCING FACTORS
        date: 2024
       words: 4239
      flesch: 61
     summary: A constitutive model of creep deformation of rock materials is proposed by Shao et al. In addition, research on mathematical models for creep deformation, damage, and crack evolution of materials such as rocks can grasp relevant laws [18-21].The creep process under cyclic loading can cause the accumulation of damage to coal and rock, ultimately leading to the failure of coal and rock.
    keywords: borehole; coal; creep; deformation; loading; stress; time
       cache: fumecheng-12378.pdf
  plain text: fumecheng-12378.txt

        item: #119 of 526
          id: fumecheng-12379
      author: Jin, Xiaohua; Zheng, Jiyu; Hua, Shunheng; Tong, Xinru
       title: INFLUENCING FACTORS OF DEFORMATION AND FAILURE OF POROUS COAL UNDER CONVENTIONAL LOADING
        date: 2025
       words: 4092
      flesch: 58
     summary: According to the typical tensile failure mode of porous coal samples, the crack propagation and the failure state of porous coal samples are more complex [9, 10]. When the borehole diameter is small, the borehole has little effect on the coal sample structure, the compressive strength is still large, and the transverse deformation has little change compared with the loading of non-porous coal sample.
    keywords: borehole; coal; deformation; failure; inclination; loading; mpa; test
       cache: fumecheng-12379.pdf
  plain text: fumecheng-12379.txt

        item: #120 of 526
          id: fumecheng-12383
      author: Sultanov, Karim
       title: CONTACT INTERACTION OF AN UNDERGROUND PIPELINE WITH SOIL UNDER DYNAMIC IMPACTS
        date: 2024
       words: 7659
      flesch: 64
     summary: Underground pipelines serve as essential engineering life support lines for the population and industry, making them crucial for the economy of any country. Accepted March 28, 2024 Corresponding author: Karim Sultanov Institute of Mechanics and Seismic Stability of Structures named after M.T. Urazbaev, Academy of Sciences of the Republic of Uzbekistan, Durmon yuli street 33, 100125 Tashkent, Uzbekistan E-mail: sultanov.karim@mail.ru https://orcid.org/0000-0002-5526-9862 486 K. SULTANOV The specific characteristics of the contact and friction between underground pipelines and soil are notable due to the significant difference in strength between a steel pipeline and loamy soil.
    keywords: contact; fig; friction; interaction; law; layer; pipeline; section; soil; sultanov; wave
       cache: fumecheng-12383.pdf
  plain text: fumecheng-12383.txt

        item: #121 of 526
          id: fumecheng-12385
      author: Fu, Qian-Wen; Liu, Qing-Hua; Hu, Tao
       title: MULTI-OBJECTIVE OPTIMIZATION RESEARCH ON VR TASK SCENARIO DESIGN BASED ON COGNITIVE LOAD
        date: 2024
       words: 9556
      flesch: 38
     summary: Currently, there is limited research exploring the optimization of virtual reality design elements in VR scenario contexts based on user cognitive load. Additionally, the impact of multivariate relationships between multi-channel perception and design resource features on cognitive task learning is investigated, aiming to decrease user cognitive load and improve operational efficiency within VR systems.
    keywords: data; design; design elements; elements; information; interaction; interface; load; method; objective; optimization; reality; research; scenario; system; task; users; vr system; vr task
       cache: fumecheng-12385.pdf
  plain text: fumecheng-12385.txt

        item: #122 of 526
          id: fumecheng-12390
      author: Romanova, Varvara; Lychagin, Dmitry; Pisarev, Maxim; Zinovieva, Olga; Balokhonov, Ruslan
       title: GRAIN-SCALE DEFORMATION MECHANISMS IN AN ADDITIVELY MANUFACTURED ALUMINIUM BRONZE OLIGOCRYSTAL
        date: 2024
       words: 6081
      flesch: 48
     summary: Special focus is placed on the analysis of microscale stress and strain fields and their interrelation with the activation of slip systems in surface grains and the evolution of surface morphology. 10 V. ROMANOVA, D.V. LYCHAGIN, M. PISAREV, O. ZINOVIEVA, R. BALOKHONOV 4.2 Analysis of Active Slip Systems The experimental data, numerical results and analytical estimates were brought together to reveal the peculiarities of slip activation in surface grains under compression.
    keywords: compression; deformation; fig; grain; mechanisms; oligocrystal; plastic; scale; slip; slip systems; strain; stress; surface; systems
       cache: fumecheng-12390.pdf
  plain text: fumecheng-12390.txt

        item: #123 of 526
          id: fumecheng-12394
      author: Khudoynazarov, Khayrulla
       title: LONGITUDINAL-RADIAL VIBRATIONS OF A VISCOELASTIC CYLINDRICAL THREE-LAYER STRUCTURE
        date: 2024
       words: 6986
      flesch: 68
     summary:  = − − − = − − −              , and ψ(n), n=1,2, … is the logarithmic derivative of the Gamma function. I r C K r = + − + = − − −            (16)
    keywords: layer; r r; structure
       cache: fumecheng-12394.pdf
  plain text: fumecheng-12394.txt

        item: #124 of 526
          id: fumecheng-12402
      author: Balokhonov, Ruslan; Utyaganova, Veronika; Gatiyatullina, Diana; Zemlianov, Aleksandr; Romanova, Varvara
       title: INTERLAYER EFFECT ON DEFORMATION AND FRACTURE OF DENDRITIC STRUCTURE FORMED DURING WIRE-FEED ELECTRON-BEAM ADDITIVE MANUFACTURING OF AL-SI ALLOY
        date: 2024
       words: 5163
      flesch: 48
     summary: TEM EDS mapping of fine eutectic structure (c) The dendritic structure inside the layer represents a two-level composite material (Fig. 3a). Model structures inheriting the experimental morphology are created, and their deformation and fracture are simulated using ABACUS/Explicit, with the user-defined subroutines being developed to describe the constitutive behavior of aluminum dendrite, silicon and eutectic materials.
    keywords: aluminum; deformation; dendrites; eutectic; fig; fracture; interlayer; material; phase; plastic; silicon; strain; stress; structure
       cache: fumecheng-12402.pdf
  plain text: fumecheng-12402.txt

        item: #125 of 526
          id: fumecheng-12403
      author: Kuznetsov, Viktor P.; Tatarintsev, Igor V.; Voropaev, Vladimir V.; Korelin, Andrei V.
       title: SELECTION OF OPTIMAL TECHNOLOGICAL PARAMETERS FOR FORMING NOMINALLY FLAT SURFACES WITH LUBRICATING MICROCAVITIES
        date: 2024
       words: 5079
      flesch: 45
     summary: The aim of this study is to determine the optimal combination of technological parameters for hardening burnishing (normal force, feed rate and number of tool passes) according to the criteria of microhardness HV, mean absolute error of microprofile Sa and the minimization of periodic impacts’ influence that appear after the turning step, the optimization of grit and 462 V.P. KUZNETSOV, I.V. TATARINTSEV, V.V. VOROPAEV, A.V. KORELIN application force of the honing stone during deformation profiling of lubricating microcavities by the criterion of surface oil absorption power, and normal force during smoothing burnishing by the criterion of minimum plateau roughness and maximum surface oil absorption power Vvv. Both particular parameter values and a multitude of surface topography parameters can be used to assess the quality of nominally flat surfaces and their tribological properties.
    keywords: burnishing; feed; force; microcavities; parameters; psd; rate; rev; surface; turning
       cache: fumecheng-12403.pdf
  plain text: fumecheng-12403.txt

        item: #126 of 526
          id: fumecheng-12430
      author: Yang, Hai-Yan; Wang, Yu; Liu, Sen-Lin; Tu, Qing; Chen, Gang
       title: ATTENUATION CHARACTERISTICS OF ULTRASONIC WAVES FROM SONAR LOGGING TOOLS IN SALT CAVERN GAS STORAGE
        date: 2024
       words: 5284
      flesch: 49
     summary: The sonar detection of salt cavern gas storage (SCGS) has a low accuracy due to sound wave attenuation. The model was adopted to explore the effect of solution temperature and concentration on sound wave attenuation.
    keywords: attenuation; attenuation coefficient; coefficient; frequency; mhz; solution; sound; temperature; wave; wave attenuation
       cache: fumecheng-12430.pdf
  plain text: fumecheng-12430.txt

        item: #127 of 526
          id: fumecheng-12432
      author: Man, Da-Wei; Zhang, Yu; Tang, Li-Ping; Xu, Qing-Hu; Chen, Dong; Jiang, Bang-Dong; Han, Ting-Ting; Xu, Tao; Li, Jin-Bao
       title: NONLINEAR DYNAMICAL CHARACTERISTICS OF HYBRID TRI-STABLE PIEZOELECTRIC ENERGY HARVESTER BASED ON ROTATIONAL MOTION
        date: 2024
       words: 6648
      flesch: 50
     summary: Wang, Y.L., Yang, Z.B., Cao, D.Q., 2021, On the offset distance of rotational piezoelectric energy harvesters, Energy, 220, 119676. 27. Key words: Rotational motion, Piezoelectric energy harvester, Tri-stable, Dynamic amplifier, Steady-state dynamic response Received: January 18, 2024 / Accepted May 22, 2024 Corresponding author: Da-Wei Man School of Civil Engineering, Anhui Jianzhu University, Hefei 230601, China E-mail: daweiman@hotmail.com https://orcid.org/0000-0003-3053-2318 https://orcid.org/0009-0006-4473-9183 https://orcid.org/0009-0006-5184-4483 https://orcid.org/0000-0002-8617-8373 https://orcid.org/0009-0002-0221-9383 https://orcid.org/0009-0003-0063-138X https://orcid.org/0009-0008-2379-214X https://orcid.org/0009-0002-8384-1608 https://orcid.org/0009-0009-0251-0665 258 D.-W. MAN, Y. ZHANG, L.-P. TANG, Q.-H. XU, D. CHEN, ET AL.
    keywords: energy; harvester; htpeh; motion; output; piezoelectric; radius; speed; system; voltage
       cache: fumecheng-12432.pdf
  plain text: fumecheng-12432.txt

        item: #128 of 526
          id: fumecheng-12444
      author: Marković, Kristina; Dundović, Maja; Vrcan, Željko
       title: NEW APPROACH TO EXPERIMENTAL DETERMINATION OF ROTATIONAL PIVOT BEHAVIOUR BY PHOTOGRAMMETRIC MEASUREMENT
        date: 2024
       words: 5760
      flesch: 44
     summary: Key words: Compliant mechanism, Parasitic shift, Photogrammetry, DIC, Feature detection Received: February 08, 2024 / Accepted May 14, 2024 Corresponding author: Željko Vrcan University of Rijeka, Faculty of Engineering, Vukovarska 58, HR-51000 Rijeka, Croatia E-mail: zeljko.vrcan@riteh.uniri.hr 2 K. MARKOVIĆ, M. DUNDOVIĆ, Ž. VRCAN 1. INTRODUCTION The development and availability of innovative technologies present a constant challenge to design engineers to develop new and innovative machine concepts that will keep them competitive and successful in the targeted market. Compliant mechanisms are mechanical assemblies that transmit motion, power or force without friction, wear, and backlash with excellent fatigue resistance.
    keywords: analysis; behaviour; calibration; fig; image; manufacturing; measurement; mechanism; pivot; precision; results; spring
       cache: fumecheng-12444.pdf
  plain text: fumecheng-12444.txt

        item: #129 of 526
          id: fumecheng-12510
      author: Šćepanović, Biljana; Rutešić, Snežana; Mijušković, Olga; Gil-Martín, Luisa María; Hernández-Montes, Enrique
       title: ANN AND HYBRID MODELLING OF ECCENTRICALLY PATCH LOADED STEEL I-GIRDERS
        date: 2024
       words: 11273
      flesch: 64
     summary: Hence, the ultimate strength of eccentrically patch loaded steel I-girders should be found out in two phases: firstly, girder collapse mode should be estimated; secondly, depending on expected collapse mode, ultimate load should be calculated appropriately. Hence, the ultimate strength of eccentrically patch loaded steel I-girders should be found out in two steps: at first, girder collapse mode should be estimated; secondly, depending on expected collapse mode, ultimate load should be determined appropriately.
    keywords: ann; collapse; collapse mode; exp; girders; load; mode; patch; steel; ultimate
       cache: fumecheng-12510.pdf
  plain text: fumecheng-12510.txt

        item: #130 of 526
          id: fumecheng-12513
      author: Kang, Daekook; Suvitha, Krishnan; Sandra, Michael; Pamucar, Dragan; Simic, Vladimir; Narayanamoorthy, Samayan
       title: PICTURE-HESITANT FUZZY-BASED DUAL-NORMALIZED MULTIPLE AGGREGATIONS FOR MATERIAL SELECTION IN A LIFT-BASED CONVERTER
        date: 2024
       words: 8547
      flesch: 54
     summary: Farhadinia, B., Xu, Z., 2021, Developing the comparison techniques of probabilistic hesitant fuzzy elements in multiple criteria decision making, Soft Computing, 25, pp. 331-342. 37. Sahoo, S.K., Goswami, S.S., 2023, A comprehensive review of multiple criteria decision-making (MCDM) Methods: advancements, applications, and future directions, Decision Making Advances, 1(1), pp. 25-48. 11.
    keywords: approach; criteria; decision; desktop; energy; fuzzy; lift; making; material; method; selection; wecs
       cache: fumecheng-12513.pdf
  plain text: fumecheng-12513.txt

        item: #131 of 526
          id: fumecheng-12515
      author: Devarajan, Balaji; Lakshminarasimhan, Rajeshkumar; Murugan, Aravindh; Rangappa, Sanjay M.; Siengchin, Suchart; Marinkovic, Dragan
       title: RECENT DEVELOPMENTS IN NATURAL FIBER HYBRID COMPOSITES FOR BALLISTIC APPLICATIONS: A COMPREHENSIVE REVIEW OF MECHANISMS AND FAILURE CRITERIA
        date: 2024
       words: 19429
      flesch: 41
     summary: Matrix and Interface System An important function of a matrix in ballistic composites is to distribute stresses between fibers. Warp and weft directional fibers absorb most energy during ballistic impacts in 3D woven hybrid interlocking composites [70, 71].
    keywords: absorption; applications; aramid; armor; behavior; composites; effect; energy; engineering; epoxy; experimental; fabric; failure; fiber; fiber composites; hybrid; impact; journal; kevlar; laminates; layer; materials; matrix; natural; performance; projectile; properties; resistance; structures; thickness; velocity
       cache: fumecheng-12515.pdf
  plain text: fumecheng-12515.txt

        item: #132 of 526
          id: fumecheng-12518
      author: Singh, Manoj Kumar; Palaniappan, Sathish Kumar; Suyambulingam, Indran; Rangappa, Sanjay Mavinkere; Siengchin, Suchart; Marinkovic, Dragan
       title: SUSTAINABLE COMPOSITE MATERIALS FOR ELECTRIC VEHICLE APPLICATIONS: A COMPREHENSIVE REVIEW
        date: 2025
       words: 13649
      flesch: 41
     summary: 4 shows an overview of various impacts of internal combustion engine vehicles (ICEVs), hybrid electric vehicles (HEVs), and battery electric vehicles (BEVs) during LCA using the electricity mix of 2015 [88]. Despite a challenging year for the car market in 2020, the sales of electric vehicles, including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), nearly doubled in 2021, reaching a total of 6.6 million units (Fig. 5).
    keywords: applications; automotive; battery; components; composites; cycle; electric; energy; evs; fiber; impact; industry; life; lightweight; manufacturing; market; materials; natural; performance; polymer; production; research; review; technology; use; vehicle; weight
       cache: fumecheng-12518.pdf
  plain text: fumecheng-12518.txt

        item: #133 of 526
          id: fumecheng-12538
      author: Valvano, Stefano
       title: HOMOGENISED PROPERTIES OF LATTICE METAL COMPOSITE CELL
        date: 2025
       words: 7694
      flesch: 54
     summary: The originality of the work consists in the study of different BCC cell configurations: standard metal BCC cell, metal BCC cell with waved struts, metal composite BCC cell. 18 Sandwich panel section made of structural steel skins and homogenised lattice core based on waved BCC cells The sandwich panel with composite BCC cells shows a global structural response evaluated through the reaction force at the bottom surface, Fz = 10488 N. The sandwich panel with the homogenised core has a reaction force of Fz = 10635 N, it is clear that the homogenised model leads to an error of 1.5% on the global structural response.
    keywords: bcc; bcc cell; cell; composite; core; fig; lattice; periodic; properties; sandwich; u =; v =
       cache: fumecheng-12538.pdf
  plain text: fumecheng-12538.txt

        item: #134 of 526
          id: fumecheng-12572
      author: Zuo, Yu-Ting; Luo, Fu-Fang; Zeng, Shi-Long
       title: GECKO-INSPIRED FRACTAL BUFFER FOR PASSENGER ELEVATOR
        date: 2024
       words: 4177
      flesch: 60
     summary: [35,36] with hierarchical structure can be applied to the design of fractal buffers. At present, elevator buffers are mainly made of a single material with simple structure, which cannot fully absorb the energy within a short period of time.
    keywords: buffer; elevator; energy; fractal; gecko; metamaterials; pad; system
       cache: fumecheng-12572.pdf
  plain text: fumecheng-12572.txt

        item: #135 of 526
          id: fumecheng-12583
      author: Stević, Željko; Baydaş, Mahmut; Kavacık, Mustafa; Ayhan, Emrah; Marinković, Dragan
       title: SELECTION OF DATA CONVERSION TECHNIQUE VIA SENSITIVITY-PERFORMANCE MATCHING: RANKING OF SMALL E-VANS WITH PROBID METHOD
        date: 2024
       words: 14994
      flesch: 53
     summary: In other words, normalization or weighted method sensitivity is decisive. Sensitivity analyses are frequently performed to determine the robustness of MCDM methods, of which there are more than 200 types.
    keywords: alternative; analysis; change; criteria; data; decision; electric; mcdm; method; normalization; performance; price; probid; ranking; relationship; results; selection; sensitivity; sensitivity analysis; study; technique; transportation; vehicles; weight
       cache: fumecheng-12583.pdf
  plain text: fumecheng-12583.txt

        item: #136 of 526
          id: fumecheng-12598
      author: Marković, Danijel; Marković, Saša; Marinković, Dragan; Pamučar, Dragan
       title: DYNAMIC VEHICLE ROUTING PROBLEM FOR SMART WASTE COLLECTION
        date: 2024
       words: 5757
      flesch: 53
     summary: 6 shows the ratio of visits to locations by route, where it is clearly seen how many empty runs of municipal waste collection vehicles there are in the deterministic CVRP model. Consequently, route optimization has been the main motivation for developing smart waste collection systems.
    keywords: collection; container; cvrp; management; model; problem; smart; system; transport; vehicle; waste; waste collection
       cache: fumecheng-12598.pdf
  plain text: fumecheng-12598.txt

        item: #137 of 526
          id: fumecheng-12619
      author: Hashemi Kachapi, Sayyid H.; Hashemi Kachapi, Sayyideh Gh.
       title: COMPARISON OF NONCLASSICAL CONTROLLERS ON ‎NONLINEAR VIBRATIONS ANALYSIS OF PIEZOELECTRIC ‎NANORESONATOR
        date: 2025
       words: 7258
      flesch: 46
     summary: = (1 − �̅� �̅�2) 𝜕2�̅� 𝜕𝜏2 , (8) (1 − �̅� �̅�2) ( 𝛼1𝑤 𝜕𝑢 𝜕𝜉 + 𝛼2𝑤 𝜕𝑢 𝜕𝜉 𝜕2�̅� 𝜕𝜉2 + 𝛼3𝑤 𝜕𝑢 𝜕𝜉 𝜕2�̅� 𝜕𝜃2 + 𝛼4𝑤 𝜕2𝑢 𝜕𝜉2 𝜕�̅� 𝜕𝜉 + 𝛼5𝑤 𝜕2𝑢 𝜕𝜉𝜕𝜃 𝜕�̅� 𝜕𝜃 +𝛼6𝑤 𝜕2𝑢 𝜕𝜉𝜕𝜃 𝜕�̅� 𝜕𝜃 + 𝛼7𝑤 𝜕𝑢 𝜕𝜃 𝜕2�̅� 𝜕𝜉𝜕𝜃 + 𝛼8𝑤 𝜕2𝑢 𝜕𝜃2 𝜕�̅� 𝜕𝜉 + 𝛼9𝑤 𝜕�̅� 𝜕𝜉 𝜕2�̅� 𝜕𝜉𝜕𝜃 +𝛼10𝑤 𝜕2�̅� 𝜕𝜉2 𝜕�̅� 𝜕𝜃 + 𝛼11𝑤 𝜕2�̅� 𝜕𝜉𝜕𝜃 𝜕�̅� 𝜕𝜉 + 𝛼12𝑤 𝜕�̅� 𝜕𝜃 + 𝛼13𝑤 𝜕�̅� 𝜕𝜃 𝜕2�̅� 𝜕𝜉2 +𝛼14𝑤 𝜕�̅� 𝜕𝜃 𝜕2�̅� 𝜕𝜃2 + 𝛼15𝑤 𝜕2�̅� 𝜕𝜃2 𝜕�̅� 𝜕𝜃 + 𝛼16𝑤�̅� + 𝛼17𝑤�̅� 𝜕2�̅� 𝜕𝜉2 + 𝛼18𝑤�̅� 𝜕2�̅� 𝜕𝜃2 +𝛼19𝑤 𝜕2�̅� 𝜕𝜉2 + 𝛼20𝑤 𝜕�̅� 𝜕𝜉 𝜕2�̅� 𝜕𝜉𝜕𝜃 𝜕�̅� 𝜕𝜃 + 𝛼21𝑤 𝜕2�̅� 𝜕𝜉2 ( 𝜕�̅� 𝜕𝜉 ) 2 + 𝛼22𝑤 𝜕2�̅� 𝜕𝜉2 ( 𝜕�̅� 𝜕𝜃 ) 2 +𝛼23𝑤 𝜕4�̅� 𝜕𝜉4 + 𝛼24𝑤 ( 𝜕�̅� 𝜕𝜉 ) 2 + 𝛼25𝑤 𝜕4�̅� 𝜕𝜉2𝜕𝜃2 + 𝛼26𝑤 ( 𝜕�̅� 𝜕𝜉 ) 2 𝜕2�̅� 𝜕𝜃2 +𝛼27𝑤 𝜕2�̅� 𝜕𝜃2 + 𝛼28𝑤 𝜕4�̅� 𝜕𝜃4 + 𝛼29𝑤 𝜕2�̅� 𝜕𝜃2 ( 𝜕�̅� 𝜕𝜃 ) 2 + 𝛼30𝑤 ( 𝜕�̅� 𝜕𝜃 ) 2 +𝛼31𝑤 𝜕4�̅� 𝜕𝜉2𝜕𝜏2 + 𝛼32𝑤 𝜕4�̅� 𝜕𝜃2𝜕𝜏2 + 𝛼33𝑤 ) (9) = (1 − �̅� �̅�2) ( 𝜕2�̅� 𝜕𝜏2 + 𝐶�̅� 𝜕�̅� 𝜕𝜏 + 𝐾𝑤�̅� − 𝐾𝑝�̅� 2�̅� − �̅�𝑒(�̅�𝐷𝐶 + �̅�𝐴𝐶 𝑐𝑜𝑠(�̅�𝜏)) 2 √(𝑚1�̅� − �̅�)(2𝑚4�̅� + 𝑚1�̅� − �̅�) Also, Figs. 17-22 present frequency response and stability analysis PENR for different values of direct (�̅�𝑫𝑪) and alternating (�̅�𝑨𝑪) voltages based on different theories of CT, NLT, SGT, GMSIT, GMSIT combined with NLT and SGT for CC boundary conditions.
    keywords: frequency; hashemi; parameter �; piezoelectric; surface; ̅ �; � ̅; � �; � 𝐴𝐶; � 𝐷𝐶; � 𝜕𝜃; � 𝜕𝜉; � 𝜕𝜉2; 𝜕 �; 𝜕2 �
       cache: fumecheng-12619.pdf
  plain text: fumecheng-12619.txt

        item: #138 of 526
          id: fumecheng-12677
      author: Milosevic, Aleksandar; Simunovic, Goran; Kanovic, Zeljko; Simunovic, Katica; Santosi, Zeljko; Sokac, Mario; Vukelic, Djordje
       title: COMPREHENSIVE EVALUATION OF DIMENSIONAL DEVIATION, FLANK WEAR, SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN DRY TURNING OF C45 STEEL
        date: 2024
       words: 9391
      flesch: 55
     summary: In contrast to the previous work, this study shows the influence of a larger number of input parameters on a larger number of output parameters in dry turning of C45 steel. Dragicevic, M., Begović, E., Peko, I., 2019, Optimization of dry turning process parameters using Taguchi method combined with fuzzy logic approach, Proceedings on Engineering Sciences, 1(1), pp. 429-435. 19.
    keywords: corner; cutting; feed; flank; input; output; parameters; radius; roughness; speed; standard; surface; turning; wear; wiper
       cache: fumecheng-12677.pdf
  plain text: fumecheng-12677.txt

        item: #139 of 526
          id: fumecheng-12692
      author: Wilhayn, Josefine; Lyashenko, Iakov A.; Li, Qiang; Popov, Valentin L.
       title: INFLUENCE OF TANGENTIAL SLIDING ON THE CONTACT AREA OF A MACROSCOPIC ADHESIVE CONTACT
        date: 2024
       words: 4816
      flesch: 58
     summary: Depending on preloading, shear can lead to increase or decrease of contact area and to decrease or increase of normal contact force. One can see that there is a small jump-like increase in contact area at the point of initial contact, after which the area A increases linearly with further indentation.
    keywords: area; contact; contact area; edge; fig; force; indentation; indenter; sliding
       cache: fumecheng-12692.pdf
  plain text: fumecheng-12692.txt

        item: #140 of 526
          id: fumecheng-12699
      author: Watanabe, Toshiki; Hatanaka, Shintaro; Nakano, Ken; Popov, Valentin L.
       title: SLIDING FRICTION IN CONTACTS WITH ONE- AND TWO-DIMENSIONAL VISCOELASTIC FOUNDATIONS AND VISCOELASTIC HALF-SPACE
        date: 2024
       words: 5437
      flesch: 64
     summary: We found that extending the 1D to the 2D models does not change the master curves qualitatively, confirming that the simplest 1D model is a remarkable tool for understanding sliding friction due to solid viscoelasticity. In this paper, we first show theoretical solutions for one-dimensional (1D) problems of viscoelastic friction with a 1D viscoelastic foundation.
    keywords: friction; sliding; v v; viscoelastic; w w
       cache: fumecheng-12699.pdf
  plain text: fumecheng-12699.txt

        item: #141 of 526
          id: fumecheng-12742
      author: Song, Meijing; Stević, Željko; Badi, Ibrahim; Marinković, Dragan; Lv, Yifei; Zhong, Kaiyang
       title: ASSESSING PUBLIC ACCEPTANCE OF AUTONOMOUS VEHICLES USING A NOVEL IRN PIPRECIA - IRN AROMAN MODEL
        date: 2025
       words: 8446
      flesch: 64
     summary: ... ( ) ( ) ... ( ) n n n m m m mn m n C C C A IRN ш IRN ш IRN ш A IRN ш IRN ш IRN ш Ш A IRN ш IRN ш IRN ш       =       (11) where alternatives are denoted by m, and criteria by n. Step 2. Normalize the initial interval rough group matrix. Autonomous vehicles (AVs) have become a tangible presence on roads, indicating the emergence of a promising transportation technology for the future, possibly arriving sooner than anticipated.
    keywords: acceptance; avs; criteria; irn; j j; public; transportation; vehicles; ш ш
       cache: fumecheng-12742.pdf
  plain text: fumecheng-12742.txt

        item: #142 of 526
          id: fumecheng-12767
      author: Choi, Chunghyun; Qaiser, Nadeem; Hwang, Byungil
       title: MECHANICALLY PRESSED POLYMER-MATRIX COMPOSITES WITH 3D STRUCTURED FILLER NETWORKS FOR ELECTROMAGNETIC INTERFERENCE SHIELDING APPLICATION
        date: 2024
       words: 5625
      flesch: 54
     summary: Therefore, the PS@MXene@BNNSs composite developed in this study shows significant potential for use in electronic devices requiring electromagnetic wave shielding. Figure 3(b) presents the MAX and MXene XPS analysis.
    keywords: aptes; bnnss; charge; composites; emi; fig; materials; mxene; potential; shielding; surface; zeta
       cache: fumecheng-12767.pdf
  plain text: fumecheng-12767.txt

        item: #143 of 526
          id: fumecheng-12769
      author: Alparslan, Cem; Bayraktar, Şenol; Gupta, Kapil
       title: A COMPARATIVE STUDY ON MECHANICAL PERFORMANCE OF PLA, ABS, AND CF MATERIALS FABRICATED BY FUSED DEPOSITION MODELING
        date: 2024
       words: 7130
      flesch: 49
     summary: While the fracture surfaces of PLA samples were smooth, and the layer lines were evident. In PLA samples, the highest YS (18.95 MPa) and TS (20.45 MPa) were obtained in the hexagon pattern and LT of 0.15 mm, while the lowest YS value (10.17 MPa) was measured in line pattern and LT of 0.35 mm, and the TS value was (8.48 MPa) in the triangle pattern and LT of 0.35 mm (Fig 6a).
    keywords: abs; fdm; fig; fracture; materials; parameters; pla; printing; properties; samples; tensile
       cache: fumecheng-12769.pdf
  plain text: fumecheng-12769.txt

        item: #144 of 526
          id: fumecheng-12775
      author: Kang, Daekook; Suvitha, Krishnan; Narayanamoorthy, Samayan
       title: COMPREHENSIVE DISTANCE-BASED RANKING METHOD FOR EVALUATING HYDRAULIC CONVERTERS IN TIDAL STREAM TURBINES UTILIZING PICTURE FERMATEAN FUZZY SET
        date: 2024
       words: 9030
      flesch: 54
     summary: Key words: Multi criteria decision making, Hydraulic converter, Tidal stream turbine, Picture Fermatean fuzzy set, Comprehensive distance based ranking 1. INTRODUCTION Tidal energy has a global capacity of 120 GW and is capable of generating up to 150 TWh annually [1]. Currently, tidal stream turbines are primarily developed using blade element momentum (PEM) theory, which is also used to investigate their hydrodynamic properties [5].
    keywords: approach; cobra; criteria; decision; energy; fuzzy; making; method; ranking; set; stream; tidal; turbine
       cache: fumecheng-12775.pdf
  plain text: fumecheng-12775.txt

        item: #145 of 526
          id: fumecheng-12784
      author: Popov, Valentin L.; Khudoynazarov, Khayrulla
       title: EDITORIAL
        date: 2024
       words: 1300
      flesch: 28
     summary: ▪ Contact interaction of an underground pipeline with soil under dynamic impacts (K. Sultanov). Based on numerical simulations with the Boundary Element Method and experiments, the authors argue that the much-debated question of whether shear leads to an increase or decrease of contact area of an adhesive contact and contact strength, cannot be answered unambiguously as the answer depends on preloading history.
    keywords: contact; friction; tribology; viscoelastic; workshop
       cache: fumecheng-12784.pdf
  plain text: fumecheng-12784.txt

        item: #146 of 526
          id: fumecheng-12795
      author: Singh, Gurpreet; Bose, Dhruv; Chanda, Arnab
       title: DEVELOPMENT AND TESTING OF A NOVEL DIABETIC ORTHOSIS FOR PLANTAR PRESSURE REDUCTION
        date: 2024
       words: 7783
      flesch: 59
     summary: Ma, Z., Lin, J., Xu, X., Ma, Z., Tang, L., Sun, C., Li, D., Liu, C., Zhong, Y., Wang, L., 2019, Design and 3D printing of adjustable modulus porous structures for customized diabetic foot insoles, International Journal of Lightweight Materials and Manufacture, 2(1), pp. Tang, L., Wang, L., Bao, W., Zhu, S., Li, D., Zhao, N., Liu, C., 2019, Functional gradient structural design of customized diabetic insoles, Journal of the Mechanical Behavior of Biomedical Materials, 94, pp.
    keywords: azp; dev; foot; fore; heel; inserts; insole; kpa; loading; participants; plantar; pressure; std; values
       cache: fumecheng-12795.pdf
  plain text: fumecheng-12795.txt

        item: #147 of 526
          id: fumecheng-12797
      author: Gokulachandran, Jaganathan; Thenarasu, Mohanavelu; Pothkanoori, Bhadrinath; Narassima, Madhavarao Seshadri; Tirkolaee, Erfan Babaee
       title: RELIABILITY PREDICTION AND PROCESS PARAMETER OPTIMIZATION OF WELDED JOINTS: ARTIFICIAL NEURAL NETWORK AND FUZZY LOGIC
        date: 2025
       words: 11552
      flesch: 48
     summary: Tan, X., Wang, C., Xie, K., Xie, L., Wang, P., 2023, Research on fatigue reliability prediction model and structural improvement of welded drive axle housing based on master S-N curve method, Quality and Reliability Engineering International, 39(1), pp. A significant gap exists in the literature regarding integrating these ML models specifically for weld reliability prediction using real-world parameter variations such as weld current, speed, and angle.
    keywords: ann; current; data; et al; failure; input; joints; model; network; neural; optimization; parameters; prediction; process; reliability; reliability prediction; strength; time; values; weld; welding
       cache: fumecheng-12797.pdf
  plain text: fumecheng-12797.txt

        item: #148 of 526
          id: fumecheng-12801
      author: He, Chun-Hui; Liu, Hua-Wei; Liu, Chao
       title: A FRACTAL-BASED APPROACH TO THE MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETES
        date: 2024
       words: 5192
      flesch: 57
     summary: The solution of Eq. (10) is https://baike.baidu.com/item/%E5%B8%8C%E8%85%8A%E5%AD%97%E6%AF%8D/4428067#3-1 332 C.-H. HE, H.-W. LIU, C. LIU 1/2 1/2 0 1/2 1/2 0 1 ( , ) ( ) 1 erf( ) 2 1 ( )erfc( ) 2 DRH s RH RH RH D s RH RH RH D s    − −   − −     = + − −    = + − (11) where RH0=RH(0,t), RH∞=RH(∞,t), erf is the error function and erfc is the complementary error function. 1/2 /2 0 1/2 /2 0 1 ( , ) ( ) 1 erf( ) 2 1 ( )erfc( ) 2 DRH x t RH RH RH D t x RH RH RH D t x     − −   − −     = + − −    = + − (12)
    keywords: concrete; diffusion; fractal; humidity; t t; − −
       cache: fumecheng-12801.pdf
  plain text: fumecheng-12801.txt

        item: #149 of 526
          id: fumecheng-12808
      author: Stefanović Gobeljić, Vanja; Grbović, Aleksandar; Sedmak, Aleksandar; Sedmak, Simon; Djukanovic, Gordana; Bogojević, Aleksandar; Vučetić, Ivana
       title: USE OF FIVE-PARAMETER OPTIMIZATION OF ATTACHMENT LUG GEOMETRY TO IMPROVE ITS FATIGUE LIFE
        date: 2024
       words: 4322
      flesch: 56
     summary: For this approach one needs reliable experimental data for fatigue crack growth rate and realistic numerical simulation of fatigue crack growth, as demonstrated here. Separating Morphing and Adaptive Remeshing Technology (SMART) was used in the scope of Finite Element Method (FEM) to simulate fatigue crack growth by and to obtain fatigue life for different geometry parameters.
    keywords: attachment; crack; fatigue; growth; life; lug; model; optimization; parameter
       cache: fumecheng-12808.pdf
  plain text: fumecheng-12808.txt

        item: #150 of 526
          id: fumecheng-12816
      author: He, Ji-Huan
       title: PERIODIC SOLUTION OF A MICRO-ELECTROMECHANICAL SYSTEM
        date: 2024
       words: 3719
      flesch: 72
     summary: d u du du u A A  = − − = − = − = − − − (17)
    keywords: frequency; u u; − −
       cache: fumecheng-12816.pdf
  plain text: fumecheng-12816.txt

        item: #151 of 526
          id: fumecheng-12829
      author: Mallek, Hanen; Mellouli, Hana; Ben Said, Lotfi; Wali, Mondher; Dammak, Fakhreddine; Alhadri, Muapper
       title: POROSITY EFFECTS ON NONLINEAR STATIC PERFORMANCES OF FUNCTIONALLY GRADED SHELLS CONSIDERING THICKNESS STRETCHING
        date: 2025
       words: 13209
      flesch: 58
     summary: Moreover, an increase in porosity volume fraction exacerbates the deflection of porous FGM shell structures, underscoring the structural implications of porosity in FGM materials. Shell structures find widespread applications
    keywords: fig; k k; material; porosity; shell; strain; t t; thickness;  ;  
       cache: fumecheng-12829.pdf
  plain text: fumecheng-12829.txt

        item: #152 of 526
          id: fumecheng-12839
      author: Gao, Haining; Shen, Hongdan; Yue, Caixu; Li, Rongyi; Liang, Steven Y.; Wang, Yinlin; Liu, Wenfu; Yang, Yong
       title: A MONITORING METHOD OF MILLING CHATTER BASED ON OPTIMIZED HYBRID NEURAL NETWORK WITH ATTENTION MECHANISM
        date: 2025
       words: 8700
      flesch: 55
     summary: Sensor data acquisition in machining processes encompasses multiple signal components, including spindle rotation frequency with its harmonics, chatter frequencies, local outliers, and measurement noise. Using SFT technology to remove the spindle rotation frequency and its multiples from the vibration signal can effectively improve the significance of chatter features.
    keywords: algorithm; chatter; cutting; data; detection; domain; feature; fig; frequency; machining; method; milling; missa; model; monitoring; signal; time
       cache: fumecheng-12839.pdf
  plain text: fumecheng-12839.txt

        item: #153 of 526
          id: fumecheng-12885
      author: Vahabzadeh, Sahand; Haghshenas, Sina S.; Ghoushchi, Saeid J.; Guido, Giuseppe; Simic, Vladimir; Marinkovic, Dragan
       title: A NEW FRAMEWORK FOR RISK ASSESSMENT OF ROAD TRANSPORTATION OF HAZARDOUS SUBSTANCES
        date: 2025
       words: 14785
      flesch: 48
     summary: [49] proposed the integrated quality function deployment and multicriteria decision- making (QFD-MCDM) framework for selecting the key drivers to I5.0 in order to enhance supply chain resilience while concurrently handling hazardous material transportation risk. Each method adds something different, which indicates that a comprehensive assessment framework is vital when taking into consideration the complex nature of hazardous material transportation risks.
    keywords: analysis; approach; assessment; criteria; decision; framework; mabac; making; materials; method; number; risk; road; s. s.; study; swara; table; transportation
       cache: fumecheng-12885.pdf
  plain text: fumecheng-12885.txt

        item: #154 of 526
          id: fumecheng-12896
      author: Rani, Pratibha; Mishra, Arunodaya Raj; Alshamrani, Ahmad M.; Alrasheedi, Adel Fahad; Atanasković, Predrag; Simic, Vladimir
       title: INTUITIONISTIC FUZZY DISTANCE MEASURE-BASED APPROACH FOR ADOPTING THE BLOCKCHAIN TECHNOLOGY IN THE LOGISTICS INDUSTRY
        date: 2025
       words: 11966
      flesch: 65
     summary: Step 5: Compute the IF-ideal solution (IF-IS) matrix M = (Mj)1×t using ( ) ( ) 1 max ( ) , , ( , ) min ( ) , . The combination of objective and subjective weighting methods cannot only compute the criteria weights based on the quantitative data but also consider the DEs’ opinions during the assessment of criteria weights.
    keywords: blockchain; criteria; decision; distance; k g; logistics; merec; model; weight
       cache: fumecheng-12896.pdf
  plain text: fumecheng-12896.txt

        item: #155 of 526
          id: fumecheng-1292
      author: Ayed, Sadoon; Ilić, Gradimir; Živković, Predrag; Vukić, Mića; Tomić, Mladen
       title: INSTABILITY OF THE RAYLEIGH-BENARD CONVECTION FOR INCLINED LOWER WALL WITH TEMPERATURE VARIATION
        date: 2016
       words: 7615
      flesch: 75
     summary: k k k k k x x y t B y t B y t k y t y t S y t t t N N l k                (40) y y S y S y N N k                                                , cos , 1,..., 1, , 0,1,..., 2 jx j y n t y y j
    keywords: k j; k k; k y; n k; n t; t k; t t; y t; y y;  ;  ;  ;  
       cache: fumecheng-1292.pdf
  plain text: fumecheng-1292.txt

        item: #156 of 526
          id: fumecheng-12923
      author: Więckowski, Jakub; Sałabun, Wojciech
       title: MAKING MORE INFORMED DECISIONS IN MULTI-CRITERIA PROBLEMS UNDER UNCERTAIN CONDITIONS OF CRITERIA WEIGHTS: DRONE SELECTION STUDY CASE
        date: 2025
       words: 5717
      flesch: 40
     summary: Chen, N., Xu, Z., 2015, Hesitant fuzzy ELECTRE II approach: a new way to handle multi-criteria decision making problems, Information Sciences, 292, pp. 175-197. 24. Ozcalici, M., 2022, Asset allocation with multi-criteria decision making techniques, Decision Making: Applications in Management and Engineering, 5(2), pp.
    keywords: analysis; approach; criteria; criteria decision; decision; making; methods; problems; ranking; scenarios; weights
       cache: fumecheng-12923.pdf
  plain text: fumecheng-12923.txt

        item: #157 of 526
          id: fumecheng-12969
      author: Nadeem, Muhammad; Ain, Qura-Tul; Almakayeel, Naif; Shao, Yabin; Wang, Shuqiang; Shutaywi, Meshal
       title: ANALYSIS OF NANOBEAM-BASED MICROSTRUCTURE IN N/MEMS SYSTEM USING VAN DER WAALS FORCES
        date: 2024
       words: 6306
      flesch: 65
     summary:           = − =  − − − − − − =       = = = = (48) 6. NUMERICAL FINDINGS AND ANALYSIS  =    = −  = − −   = − − −  (4)
    keywords: d d; t t; − −;  ;  ;  
       cache: fumecheng-12969.pdf
  plain text: fumecheng-12969.txt

        item: #158 of 526
          id: fumecheng-12971
      author: Kizielewicz, Bartłomiej; Sałabun, Wojciech
       title: BENCHMARK STUDY OF RE-IDENTIFICATION METHODS BASED ON STOCHASTIC FUZZY NORMALIZATION AND THEIR APPLICATION TO DECISION-MAKING PROBLEMS IN ENGINEERING
        date: 2025
       words: 8739
      flesch: 39
     summary: Sałabun proposed this approach to estimate the accuracy of TOPSIS normalization methods [37]. Sałabun, W., 2013, The mean error estimation of TOPSIS method using a fuzzy reference models, Journal of Theoretical and Applied Computer Science, 7(3), pp.
    keywords: criteria; decision; identification; mabac; making; mcda; methods; model; normalization; reference; stfn; study; topsis; values
       cache: fumecheng-12971.pdf
  plain text: fumecheng-12971.txt

        item: #159 of 526
          id: fumecheng-12995
      author: Precup, Radu-Emil; Roman, Raul-Cristian; Hedrea, Elena-Lorena; Petriu, Emil M.; Bojan-Dragos, Claudia-Adina; Szedlak-Stinean, Alexandra-Iulia
       title: METAHEURISTIC-BASED TUNING OF PROPORTIONAL-DERIVATIVE LEARNING RULES FOR PROPORTIONAL-INTEGRAL FUZZY CONTROLLERS IN TOWER CRANE SYSTEM PAYLOAD POSITION CONTROL
        date: 2024
       words: 7012
      flesch: 51
     summary: 1 Structures of fuzzy control systems with: direct PD learning rule with current control error (a) (adapted from [20]), direct PD learning rule with previous control error (b) (adapted from [21]), indirect PD learning rule (c) (adapted from [22]), and open- closed-loop PD learning rule (d) Preitl, S., Precup, R.-E., 1996, On the algorithmic design of a class of control systems based on providing the symmetry of open-loop Bode plots, Scientific Bulletin of UPT, Transactions on Automatic Control and Computer Science, 41(2), pp.
    keywords: algorithms; control; control system; controllers; design; fig; ilc; learning; learning control; optimization; precup; r.-e; rule; systems
       cache: fumecheng-12995.pdf
  plain text: fumecheng-12995.txt

        item: #160 of 526
          id: fumecheng-13033
      author: Morkina, Alina Y.; Tarov, Danila V.; Khalikova, Gulnara R.; Semenov, Alexander S.; Tatarinov, Pavel S.; Yakushev, Ilya A.; Dmitriev, Sergey V.
       title: COMPARISON OF THE EFFECT OF ELECTROPLASTICITY IN COPPER AND ALUMINUM
        date: 2024
       words: 7560
      flesch: 55
     summary: The final polishing was carried out by jet electropolishing on the Tenupol - 3 machine using electrolyte of the following composition: for copper wire 20% aqueous solution of H3PO4 (at room temperature), for aluminum wire 750 ml methanol, 250 ml HNO3 (at 28°C). Imaging was performed at an accelerating voltage of 20 kV. For all states, the imaging step was set to 0.5 μm for copper wire and 0.3 μm for aluminum wire, with a maximum allowable misorientation error of 2°.
    keywords: aluminum; copper; current; deformation; effect; electric; electroplasticity; increase; materials; metals; pulse; results; stress; tensile; wire
       cache: fumecheng-13033.pdf
  plain text: fumecheng-13033.txt

        item: #161 of 526
          id: fumecheng-13071
      author: Mishra, Arunodaya Raj; Rani, Pratibha; Pamucar, Dragan; Alshamrani, Ahmad M.; Alrasheedi, Adel Fahad
       title: INTUITIONISTIC FUZZY MACONT METHOD FOR LOGISTICS 4.0 BASED CIRCULAR ECONOMY INTERESTED REGIONS ASSESSMENT IN THE AGRI-FOOD SECTOR
        date: 2025
       words: 13372
      flesch: 66
     summary: = (μl, νl), l = 1, 2, …, t, and wl lies between 0 and 1, and w1+w2+…+wt =1.  = + − f) ( ) ( )( )1 1 11 1 , , 0,       = − −  g) ( ) ( )( )1 1 1,1 1 , 0.
    keywords: criteria; fuzzy; score; v v;  ;  
       cache: fumecheng-13071.pdf
  plain text: fumecheng-13071.txt

        item: #162 of 526
          id: fumecheng-13142
      author: Danković, Nikola; Perić, Zoran; Antić, Dragan; Jocić, Aleksandar; Nikolić, Saša S.; Kocić, Igor
       title: STABILITY ANALYSIS OF THE SECOND-ORDER DPCM PREDICTION FILTER AND CORRELATION WITH SIGNAL-TO-QUANTIZATION NOISE RATIO
        date: 2025
       words: 5124
      flesch: 56
     summary: Remark 1: Other more general forms for the bilinear transformation can be found in the literature, but in its application in the analysis of system stability in the z-domain, the above-mentioned and very similar one z=(s+1)/(s-1) occurs most frequently. A sensitivity analysis for DPCM prediction filter of arbitrary order has been performed yet.
    keywords: coefficients; dpcm; filter; order; predictor; probability; stability; system; values
       cache: fumecheng-13142.pdf
  plain text: fumecheng-13142.txt

        item: #163 of 526
          id: fumecheng-13162
      author: Stojanović, Vladimir; Dimitrov, Lubomir; Tomov, Pancho; Li, Deli; Nikolić, Vlastimir
       title: DYNAMIC STABILITY ANALYSIS OF A COUPLED MOVING BOGIE SYSTEM
        date: 2024
       words: 4519
      flesch: 57
     summary: Building upon the work of Stojanović and Petković [19], which explored the stochastic stability of complex finite beam and beam-foundation systems, this study extends the analysis to a high-order shear deformable model of an infinite beam system subjected to a moving oscillator. The results suggest that further exploration of suspension stiffness variations could offer valuable strategies for improving the stability and performance of complex mechanical systems in real- world applications, particularly in the context of transportation infrastructure.
    keywords: beam; case; moving; stability; stiffness; system; ζ1+ζ2; ζ3+ζ4
       cache: fumecheng-13162.pdf
  plain text: fumecheng-13162.txt

        item: #164 of 526
          id: fumecheng-13163
      author: Rayapureddy, Sai Manoj; Maknickas, Algirdas; Matijošius, Jonas; Vainorius, Darius; Kilikevičius, Artūras
       title: COMPUTATIONAL STUDY OF FREQUENCY IMPACT ONTO THE PARTICLE PARAMETERS AND CHANGE IN ACOUSTIC AGGLOMERATION TIME WITH THE NUMBER OF PARTICLES
        date: 2024
       words: 6864
      flesch: 53
     summary: Markauskas, D., Kačianauskas, R., Maknickas, A., 2015, Numerical particle-based analysis of the effects responsible for acoustic particle agglomeration, Adv. Results demonstrate that elevated frequencies (34.6 kHz) accelerate particle agglomeration, although the overall quantity of agglomerated particles diminishes.
    keywords: acoustic; agglomeration; frequencies; frequency; impact; increase; khz; number; particles; study; velocity
       cache: fumecheng-13163.pdf
  plain text: fumecheng-13163.txt

        item: #165 of 526
          id: fumecheng-13166
      author: Haghshenas, Sina S.; Seraji, Mohammad Hassan M.; Haghshenas, Sami S.; Guido, Giuseppe; Astarita, Vittorio; Simic, Vladimir; Marinkovic, Dragan
       title: ENHANCING SUPPORT VECTOR MACHINE PERFORMANCE IN FORECASTING THE NUMBER OF VEHICLES INVOLVED IN TRAFFIC CRASHES VIA METAHEURISTIC OPTIMIZATION ALGORITHMS
        date: 2025
       words: 12345
      flesch: 51
     summary: Models 8 and 9, which come after model number 6, have a total 20 S. S. HAGHSHENAS, M. H. M. SERAJI, S. S. HAGHSHENAS, ET AL. rank of 29, making it the second highest. Future studies may investigate the implications of emerging trends faced by accident prediction models with respect to electric scooters and autonomous vehicles.
    keywords: accidents; accuracy; analysis; data; haghshenas; machine; model; number; optimization; performance; prediction; road; s. s.; safety; svm; testing; traffic; training; vehicles
       cache: fumecheng-13166.pdf
  plain text: fumecheng-13166.txt

        item: #166 of 526
          id: fumecheng-1319
      author: Petković, Dalibor; Gocić, Milan; Shamshirband, Shahaboddin
       title: ADAPTIVE NEURO-FUZZY COMPUTING TECHNIQUE FOR PRECIPITATION ESTIMATION
        date: 2016
       words: 3727
      flesch: 55
     summary: The paper investigates the accuracy of an adaptive neuro-fuzzy computing technique in precipitation estimation. [9] applied artificial neural network group techniques for precipitation estimation in which average errors for the overall precipitation event fall below 10%.
    keywords: anfis; data; estimation; layer; precipitation; serbia; system
       cache: fumecheng-1319.pdf
  plain text: fumecheng-1319.txt

        item: #167 of 526
          id: fumecheng-13236
      author: Sandra, Michael; Narayanamoorthy, Samayan; Suvitha, Krishnan; Pamucar, Dragan; Kang, Daekook
       title: OPTIMIZING NON-INVASIVE REMOTE SENSING FOR GEOTHERMAL EXPLORATION WITH T-SPHERICAL DUAL HESITANT FUZZY DECISION MODEL
        date: 2025
       words: 9285
      flesch: 48
     summary: Zhu, J., Hu, K., Lu, X., Huang, X., et al., 2015, A review of geothermal energy resources, development, and applications in China: Current status and prospects, Energy, 93, pp. Among RE sources, the transition to geothermal energy (GE) is particularly crucial due to its stability and reliability.
    keywords: alternatives; approach; criteria; decision; energy; exploration; fuzzy; geothermal; making; mcdm; method; sensing; set; technique
       cache: fumecheng-13236.pdf
  plain text: fumecheng-13236.txt

        item: #168 of 526
          id: fumecheng-13240
      author: Stanojković, Jelena; Madić, Miloš; Trifunović, Milan; Janković, Predrag; Petković, Dušan
       title: A NOVEL APPROACH TO PREDICTING THE CUTTING FORCE IN TURNING USING DIMENSIONAL ANALYSIS
        date: 2025
       words: 8949
      flesch: 50
     summary: It can be observed from the literature review that the researchers used different methods to derive cutting force prediction models. Cutting forces are a critical indicator of the machining process, and their modeling is important for a variety of reasons, including tool life assessment, chatter prediction, tool condition monitoring, assessment of machining strategies and machining process optimization and control.
    keywords: 20mncrs5; analysis; chip; cutting force; feed; materials; model; parameters; process; steel; tool; turning; values
       cache: fumecheng-13240.pdf
  plain text: fumecheng-13240.txt

        item: #169 of 526
          id: fumecheng-13250
      author: Cao, Hua; Fan, Yongshen; Ma, Chunya; Li, Peng; Zhan, Wei; Cao, Yinbo; Duan, Fuyi
       title: SIMULATION AND ANALYSIS OF SPRAY DISTRIBUTION AND DROPLET SIZE OF LARGE SPRINKLER MACHINES LOADED WITH ATOMIZING MICRO-SPRINKLERS
        date: 2025
       words: 5375
      flesch: 48
     summary: 5 The Parsivel2 laser raindrop spectrometer uses laser remote sensing technology to derive droplet size distribution, precipitation kinetic energy, particle concentration, and radar reflectivity from the diameter and velocity of precipitation. The experiment adopts three different pressure conditions of 0.2 MPa, 0.3 MPa, and 0.5 MPa, and uses the Parsivel2 laser raindrop spectrometer to test the number of droplets under different spraying droplet size conditions at different pressures, and draw a curve chart as shown in Fig.
    keywords: atomization; atomizing; distribution; droplet; fan; micro; nozzle; pressure; size; spraying; sprinkler; water
       cache: fumecheng-13250.pdf
  plain text: fumecheng-13250.txt

        item: #170 of 526
          id: fumecheng-13259
      author: Dorić, Jovan; Nikolić, Nebojša; Galamboš, Stjepan; Feher, Dalibor; Nikolić, Boban
       title: INNOVATIVE DESIGN STRATEGY FOR AN INTERNAL COMBUSTION ENGINE WITH IMPROVED OUTPUT CHARACTERISTICS
        date: 2025
       words: 6753
      flesch: 47
     summary: CAD model of concept engine was made with CATIA V5. The curve of maximum torque over a broad range of engine speeds is a logical outcome of the operational cycle in a variable piston motion engine.
    keywords: combustion; compression; concept; efficiency; engine; fig; internal; motion; piston; ratio; speeds; stroke; valve
       cache: fumecheng-13259.pdf
  plain text: fumecheng-13259.txt

        item: #171 of 526
          id: fumecheng-13266
      author: Jang, Ilkwang; Jang, Yong Hoon
       title: PREDICTION OF CONTACT DISTRIBUTION ON ROUGH SURFACES USING DEEP LEARNING ALGORITHMS
        date: 2025
       words: 13169
      flesch: 46
     summary: The deep learning algorithm developed in this study offers ease of application because the structures of existing datasets related to rough surfaces and contact area distributions align well with the proposed model. However, contact area distributions are inherently dependent on the spatial resolution, necessitating the acquisition of datasets across multiple scales.
    keywords: accuracy; analysis; area distribution; areas; characteristics; contact; contact area; contact distribution; contact mechanics; contact problems; data; dice; distribution; image; learning; learning model; model; numerical; prediction; results; scale; surface
       cache: fumecheng-13266.pdf
  plain text: fumecheng-13266.txt

        item: #172 of 526
          id: fumecheng-13292
      author: Li, Xin; Guo, Shiliang; Sun, Dejie; Cao, Lijun; Li, Cong; Tian, Shuyao; Liu, Peng; Qi, Yadong
       title: A ROLLING BEARING FAULT DIAGNOSIS METHOD BASED ON EXTREME LEARNING MACHINE OPTIMIZED BY IMPROVED WHALE OPTIMIZATION ALGORITHM
        date: 2025
       words: 8900
      flesch: 58
     summary: The diagnostic results of different fault diagnosis methods for Case 1 and Case 2 are shown in Table 7 and Table 8, respectively. Comparing the results in Tables 7 and 8, the IWOA-ELM model achieved the highest fault identification accuracy for both different types and levels of bearing fault diagnosis Table 7 Diagnosis results of different fault diagnosis methods for Case 1 Model Training accuracy rate Testing accuracy rate IWOA-ELM 98.83% 97.5% WOA-ELM 98.67% 95.5% GWO-ELM 98.33% 95.0% PSO-ELM 98.17% 95.0% ELM 98.17% 90.5% SVM 92.00% 91.25%
    keywords: algorithm; bearing; diagnosis; elm; fault; fault diagnosis; iwoa; learning; machine; method; model; optimization; rolling; set; whale
       cache: fumecheng-13292.pdf
  plain text: fumecheng-13292.txt

        item: #173 of 526
          id: fumecheng-13299
      author: Fischer, Szabolcs; Hermán, Bence; Sysyn, Mykola; Kurhan, Dmytro; Kocsis Szürke, Szabolcs
       title: QUANTITATIVE ANALYSIS AND OPTIMIZATION OF ENERGY EFFICIENCY IN ELECTRIC MULTIPLE UNITS
        date: 2025
       words: 9732
      flesch: 48
     summary: 4 shows energy consumption data (in kWh dimension) assigned to different routes, broken down by month, from January to May. Kierzkowski, A., Haładyn, S., 2022, Method for reconfiguring train schedules taking into account the global reduction of railway energy consumption, Energies 2022, 15(5), 1946. 46.
    keywords: analysis; consumption; data; distance; efficiency; electric; energy; energy consumption; energy efficiency; fig; points; railway; route; section; traction; train; transportation; values
       cache: fumecheng-13299.pdf
  plain text: fumecheng-13299.txt

        item: #174 of 526
          id: fumecheng-1332
      author: Karličić, Danilo; Ožvat, Sanja; Cajić, Milan; Kozić, Predrag; Pavlović, Ratko
       title: BENDING VIBRATION AND STABILITY OF A MULTIPLE-NANOBEAM SYSTEM INFLUENCED BY TEMPERATURE CHANGE
        date: 2016
       words: 6142
      flesch: 57
     summary: [15-17] also known as nonlocal elasticity theory. Murmu, T., Pradhan, S. C., 2009, Thermo-mechanical vibration of a single-walled carbon nanotube embedded in an elastic medium based on nonlocal elasticity theory, Computational Materials Science, 46(4), pp. 854-859. 26.
    keywords: buckling; change; frequency; load; system; temperature
       cache: fumecheng-1332.pdf
  plain text: fumecheng-1332.txt

        item: #175 of 526
          id: fumecheng-13326
      author: Eller, Balázs; Fischer, Szabolcs
       title: APPLICATION OF CONCRETE CANVAS FOR ENHANCING RAILWAY SUBSTRUCTURE PERFORMANCE UNDER STATIC AND DYNAMIC LOADS
        date: 2025
       words: 11777
      flesch: 57
     summary: In terms of the characteristics of GCCMs, this may be true for different types of CC materials in general. The other option is the bending test of CC material with a deformed surface subjected to dynamic loading.
    keywords: ballast; bending; canvas; concrete; days; fig; layer; load; material; measurement; railway; reinforcement; results; scale; specimens; strength; test
       cache: fumecheng-13326.pdf
  plain text: fumecheng-13326.txt

        item: #176 of 526
          id: fumecheng-13327
      author: Alic, Daniela; Matijošius, Jonas; Kilikevičius, Artūras
       title: NUMERICAL MODELLING OF THE CROSSWIND INFLUENCE ON VEHICLE AERODYNAMICS IN HIGHWAY TRAFFIC CONDITIONS
        date: 2025
       words: 4943
      flesch: 41
     summary: While accurate turbulence modeling is essential for predicting external vehicle flow - since higher Reynolds numbers suggest more intense turbulence, which can greatly increase drag - the results in this paper are produced using accessible computational resources and aim to provide an estimate of crosswind effects on the vehicle aerodynamics. Furthermore, understanding the impact of crosswinds on vehicle dynamics contributes to highway safety by guiding vehicle control strategies and enhancing driver assistance systems, particularly in regions prone to strong crosswinds.
    keywords: aerodynamic; airflow; car; crosswind; drag; fig; lateral; numerical; truck; vehicle; velocity
       cache: fumecheng-13327.pdf
  plain text: fumecheng-13327.txt

        item: #177 of 526
          id: fumecheng-13348
      author: Balokhonov, Ruslan; Zemlianov, Aleksandr; Shugurov, Artur; Gatiyatullina, Diana; Ivashov, Ivan; Balokhonov, Vasilii; Romanova, Varvara
       title: A TOP-DOWN MULTISCALE ANALYSIS FOR DERIVING LOCAL MATERIAL PROPERTIES OF ADDITIVELY MANUFACTURED AL-SI ALLOY
        date: 2025
       words: 8833
      flesch: 45
     summary: A Top-Down approach is proposed for the numerical-experimental determination of local material properties of an additively manufactured AlSi12 alloy possessing clearly expressed hierarchical structure. The purpose of a multiscale approach [3] is to identify the effect of porosity on mechanical properties and damage mechanisms of multidirectional carbon-fiber-reinforced polymer (CFRP) composites.
    keywords: additive; alloy; aluminum; composite; compression; dendrites; eutectic; fig; interlayer; manufacturing; material; multiscale; particles; plastic; properties; silicon; structure
       cache: fumecheng-13348.pdf
  plain text: fumecheng-13348.txt

        item: #178 of 526
          id: fumecheng-13363
      author: Kong, Song; Zhu, Peitao; Dong, Ziwen; Sun, Haoyuan; Zhang, Haojie; Sun, Chuanwen; Yin, Feifei
       title: SPONTANEOUS COMBUSTION PROPERTIES OF SUBMERGED COAL UNDERGOING TWO OXIDATION PROCESSES UNDER THE INFLUENCE OF HEATING SPEED
        date: 2025
       words: 1052
      flesch: 30
     summary: Journal's Metrics Impact Factor: 11.8 Journal Citation Reports (Clarivate): 4/182 (ENGINEERING, MECHANICAL) Journal Citation Reports Quartile: Q1 SCOPUS CiteScore: 18.7 (Q1 ranking) Vol. 23, No 4, 2025 December 2025 Table of Contents Articles VARIATIONAL APPROACH TO MICRO-ELECTRO-MECHANICAL SYSTEMS Ji-Huan He, Jinfeng Ma, Abdulrahman Ali Alsolami, Chun-Hui He PDF 649-665 MULTI-OBJECTIVE OPTIMIZATION AND PERFORMANCE ANALYSIS OF BIMORPH MAGNETO-ELECTRO-ELASTIC ENERGY HARVESTERS Meisam Moory Shirbani, Sayed Ehsan Alavi PDF 667-686 MACHINE LEARNING OF STRUCTURE – PROPERTY RELATIONSHIPS: AN APPLICATION TO HEAT GENERATION DURING PLASTIC DEFORMATION Filip Nikolić, Marko Čanađija PDF 687-707 VIBRATION AND STABILITY OF A NONLINEAR NONLOCAL STRAIN-GRADIENT FG BEAM ON A VISCO-PASTERNAK FOUNDATION Nikola Nešić, Milan Cajić, Danilo Karličić, Mihailo Lazarević, Sondipon Adhikari PDF 709-733 HOMOGENISED PROPERTIES OF LATTICE METAL COMPOSITE CELL Stefano Valvano PDF 735-756 PREDICTION OF CONTACT DISTRIBUTION ON ROUGH SURFACES USING DEEP LEARNING ALGORITHMS Ilkwang Jang, Yong Hoon Jang PDF 757-785 A FAST INSIGHT INTO HIGH-ACCURACY NONLINEAR FREQUENCY ESTIMATION OF STRINGER-STIFFENED SHELLS Chun-Hui He, Mostafa Mohammadian PDF 787-806 INNOVATIVE DESIGN STRATEGY FOR AN INTERNAL COMBUSTION ENGINE WITH IMPROVED OUTPUT CHARACTERISTICS Jovan Dorić, Nebojša Nikolić, Stjepan Galamboš, Dalibor Feher, Boban Nikolić PDF 807-825 POROSITY EFFECTS ON NONLINEAR STATIC PERFORMANCES OF FUNCTIONALLY GRADED SHELLS CONSIDERING THICKNESS STRETCHING Hanen Mallek, Hana Mellouli, Lotfi Ben Said, Mondher Wali, Fakhreddine Dammak, Muapper Alhadri PDF 827-860 MIXED-FLOW PUMP OPTIMISATION AND FLOW CHARACTERISTICS BASED ON THE ‘DUAL CARBON’ GOALS Minjia Chen, Xingqi Luo, Wanbo Chen, Jianjun Feng, Xiaohang Wang PDF 861-880 A ROLLING BEARING FAULT DIAGNOSIS METHOD BASED ON EXTREME LEARNING MACHINE OPTIMIZED BY IMPROVED WHALE OPTIMIZATION ALGORITHM Xin Li, Shiliang Guo, Dejie Sun, Lijun Cao, Cong Li, Shuyao Tian, Peng Liu, Yadong Qi PDF 881-907 EFFECT OF ELECTRIC PULSING ON THE STRUCTURE, TEXTURE AND HARDNESS OF CRYOROLLED FINE-GRAIN COPPER Mikhail Markushev, Irshat Valeev, Aygul Valeeva, Rafis Ilyasov, Elena Avtokratova, Stanislav Krymskiy, Oleg Sitdikov PDF 909-920 CU-CU MECHANICAL BONDING FOR 3D INTEGRATION OF THE NEXT GENERATION ELECTRONIC CHIPS: INTERFACIAL MECHANISMS, SURFACE ENGINEERING, AND EMERGING LOW-TEMPERATURE STRATEGIES Sooyong Choi, Chih-Ming Chen, Byungil Hwang PDF 921-943 RELIABILITY PREDICTION AND PROCESS PARAMETER OPTIMIZATION OF WELDED JOINTS: ARTIFICIAL NEURAL NETWORK AND FUZZY LOGIC Jaganathan Gokulachandran, Mohanavelu Thenarasu, Bhadrinath Pothkanoori, Madhavarao Seshadri Narassima, Erfan Babaee Tirkolaee PDF 945-969 ISSN: 0354-2025 (Print) ISSN: 2335-0164 (Online) COBISS.SR-ID 98732551 ZDB-ID: 2766459-4    
    keywords: articles; engineering; journal; papers; pdf; submission
       cache: fumecheng-13363.htm
  plain text: fumecheng-13363.txt

        item: #179 of 526
          id: fumecheng-13385
      author: Ha, Heebo; Mueller, Sebastian; Guriyanova, Svetlana; Hwang, Byungil
       title: SURFACE ENERGY CHARACTERIZATION OF A SINGLE MICROSPHERE PARTICLE USING PEAKFORCE QUANTITATIVE NANOMECHANICAL MAPPING MODE OF ATOMIC FORCE MICROSCOPE
        date: 2025
       words: 4628
      flesch: 47
     summary: Conventional methods for measuring surface energy, such as contact angle or Washburn adsorption, have limitations when applied to microscale powders, including issuers with accurate size handling and bulk material requirements. Using PF-QNM, it was possible to analyze individual particles with surface energy across a broad range.
    keywords: afm; angle; cip; composites; contact; energy; force; particles; qnm; surface; surface energy
       cache: fumecheng-13385.pdf
  plain text: fumecheng-13385.txt

        item: #180 of 526
          id: fumecheng-13386
      author: Mahmoodirad, Ali; Pamucar, Dragan; Niroomand, Sadegh
       title: AN OPTIMIZATION SCHEME FOR THE FUZZY COST-BASED ASSEMBLY LINE BALANCING PROBLEM FOR THE CASE OF NUZZLE PRODUCTION LINE IN PETROLEUM INDUSTRIES
        date: 2025
       words: 5705
      flesch: 63
     summary: This is for the first time in the literature that such measure is used in fuzzy assembly line balancing problems. Here, respecting the limitations of the cycle time and the precedence relationships of the tasks and optimizing an objective function like minimization of the number of stations forms a problem called assembly line balancing problem [2,3,4,5,6,7].
    keywords: assembly; assembly line; balancing; formulation; k k; line; line balancing; problem
       cache: fumecheng-13386.pdf
  plain text: fumecheng-13386.txt

        item: #181 of 526
          id: fumecheng-1347
      author: Rudek, Marcelo; Gumiel, Yohan Boneski; Canciglieri Jr, Osiris
       title: AUTONOMOUS CT REPLACEMENT METHOD FOR THE SKULL PROSTHESIS MODELLING
        date: 2015
       words: 4930
      flesch: 60
     summary: Table I shows the recovered compatible slices for each testing CT image from patient#1. Li, H., Xie, Z., Ruan, S.,Wang, H., 2009, The Measurement and Analyses of Symmetry Characteristic of Human Skull Based on CT images.
    keywords: bone; control; curve; descriptors; edge; fig; image; method; points; prosthesis; skull; slice
       cache: fumecheng-1347.pdf
  plain text: fumecheng-1347.txt

        item: #182 of 526
          id: fumecheng-1348
      author: Rudek, Marcelo; Silva, Nicoli Mariá; Steinmetz, Jean-Paul; Jahnen, Andreas
       title: A DATA-MINING BASED METHOD FOR THE GAIT PATTERN ANALYSIS
        date: 2015
       words: 4097
      flesch: 56
     summary: Data mining procedure As described by Mirkovic in [25], data mining is a practical procedure based on clustering and it is widely applied to group selection. Larose, D. T., 2014, Discovering knowledge in data: an introduction to data mining.
    keywords: analysis; classification; cop; data; fig; foot; gait; mining; patient; pattern; walking
       cache: fumecheng-1348.pdf
  plain text: fumecheng-1348.txt

        item: #183 of 526
          id: fumecheng-135
      author: Nutti, Björn; Marinković, Dragan
       title: AN APPROACH TO EFFICIENT FEM SIMULATIONS ON GRAPHICS PROCESSING UNITS USING CUDA
        date: 2014
       words: 4953
      flesch: 49
     summary: In a rigorous co-rotational FEM formulation, a local reference frame would be typically defined at each element integration point as those points are used in the evaluation of element matrices and vectors. However, it still requires uncoalesced memory accessed for rotation matrices.
    keywords: approach; block; element; fem; formulation; gpu; linear; matrices; matrix; memory; simulation; stiffness; time
       cache: fumecheng-135.pdf
  plain text: fumecheng-135.txt

        item: #184 of 526
          id: fumecheng-13519
      author: Huang, Xiaoqing; Lu, Shunyao; Cai, Ning; Wen, Xiantai
       title: PRESSURE OPTIMIZATION IN DEC SPRAY CHAMBERS: A COMPREHENSIVE STUDY ON HEAT AND MASS TRANSFER DYNAMICS
        date: 2025
       words: 3862
      flesch: 48
     summary: However, their study did not address the nonlinear relationship between water supply pressure and cooling efficacy, particularly under fluctuating environmental conditions [17, 18]. This study aims to investigate the relationship between water supply pressure and cooling efficiency in DEC spray chambers, with a focus on identifying pressure thresholds that optimize heat and mass transfer dynamics.
    keywords: air; bulb; cooling; evaporative; heat; nozzle; pressure; spray; temperature; transfer; water
       cache: fumecheng-13519.pdf
  plain text: fumecheng-13519.txt

        item: #185 of 526
          id: fumecheng-13543
      author: Görçün, Ömer Faruk; Durmuş, Cem Niyazi; Çanakçıoğlu, Mustafa
       title: ASSESSMENT OF THE QUALITY INSPECTORS FOR THE RAILWAY MANUFACTURING INDUSTRY IN INTERVAL-VALUED Q-RUNG ORTHOPAIR FUZZY ENVIRONMENT
        date: 2025
       words: 13812
      flesch: 58
     summary: EH VVH EH EH M VVH EH M EH EH A4 DM1 H VH VH H MH VH H H VH H MH VH MH H A4 DM2 H VVH VVH VH H VH H VH VVH H MH VVH MH H A4 DM3 H VVH VVH VVH H VH H VH VVH H MH VVH MH H A4 DM4 H VVH VVH VVH H VH H VH VVH H MH VVH MH H A4 DM5 MH VVH VVH VVH H VH H H VVH H MH VVH MH MH A5 DM1 EH H H VVH VVH VVH EH EH H EH VVH H VVH EH A5 DM2 EH H H VH VVH VVH VVH VVH H VVH VH H VH VVH A5 DM3 EH MH MH VH VVH VVH VVH VVH MH VVH VVH MH VVH VVH A5 DM4 VVH VH VVH VH VVH A2 DM4 VVH H H VH H VVH VH VVH H VVH VH H VH VVH A2 DM5 H H H VH H VVH VH VVH H VVH H H VH H A3
    keywords: criteria; decision; h h; h vh; industry; ivq; making; manufacturing; mh h; model; processes; quality; railway; results; rof; table; vvh mh; vvh vvh;  
       cache: fumecheng-13543.pdf
  plain text: fumecheng-13543.txt

        item: #186 of 526
          id: fumecheng-13629
      author: Xiao, Feng; Zhang, Ruiqiang; Qi, Chunyang
       title: SCENARIO-LEVEL HIERARCHICAL ENERGY MANAGEMENT CONTROL STRATEGY FOR HYBRID ELECTRIC VEHICLE
        date: 2025
       words: 9956
      flesch: 54
     summary: [17] cleverly integrated deep reinforcement learning and model predictive control techniques, significantly improving the energy efficiency and economics of electric vehicles. This innovative hybrid approach, particularly the precise optimization of the speed control strategy for electric vehicles through the model predictive control algorithm, not only brings technological innovation to the current electric vehicle field, but also provides valuable theoretical guidance and practical examples for the future planning of autonomous.
    keywords: algorithm; car; control; control strategy; driver; driving; electric; energy; following; function; hybrid; learning; management; model; reward; scenario; speed; strategy; vehicle
       cache: fumecheng-13629.pdf
  plain text: fumecheng-13629.txt

        item: #187 of 526
          id: fumecheng-1364
      author: Patel, Jimit R.; Deheri, Gunamani
       title: A STUDY OF THIN FILM LUBRICATION AT NANOSCALE FOR A FERROFLUID BASED INFINITELY LONG ROUGH POROUS SLIDER BEARING
        date: 2016
       words: 3368
      flesch: 58
     summary: Luo, J.B., Wen, S.Z., Huang, P., 1996, Thin film lubrication, Part 1: The transition between EHL and thin film lubrication, Wear, 194, pp. 107-115. 9. The study aims at analyzing the performance of a ferrofluid-based infinitely long rough porous slider bearing which makes use of thin film lubrication at nanoscale.
    keywords: bearing; capacity; film; load; lubrication; patel; respect
       cache: fumecheng-1364.pdf
  plain text: fumecheng-1364.txt

        item: #188 of 526
          id: fumecheng-1367
      author: Fernandes, Carlos Roberto; Fernandes, Beatriz Luci
       title: EVIDENCE OF THE SEMI-SOLID FORMATION IN THE MEDICAL GRADE TI6AL4V ALLOY USING INDUCTION HEATING
        date: 2015
       words: 3642
      flesch: 55
     summary: However, from the results of the present work, despite the narrow range of semi-solid temperature of the Ti6Al4V alloy, it seems possible to get it in a semi-solid state. 1 in order to obtain semi-solid microstructure.
    keywords: alloy; billet; fig; heating; microstructure; phase; temperature; ti6al4v
       cache: fumecheng-1367.pdf
  plain text: fumecheng-1367.txt

        item: #189 of 526
          id: fumecheng-1371
      author: Thiele, Julius; Gallinger, Simon; Seufert, Peter; Kraft, Marc
       title: THE GAIT SIMULATOR FOR LOWER LIMB EXOPROSTHESES – OVERVIEW AND FIRST MEASUREMENTS FOR COMPARISON OF MICROPROCESSOR CONTROLLED KNEE JOINTS
        date: 2015
       words: 3134
      flesch: 54
     summary: Deviation between reference values and measured values At first, a comparison of the nominal values for simulator control and the measured actual values was conducted to assess the performance of the simulator control. This could be observed for the values of the ground reaction forces and the hip moment in the sagittal plane, which represents the main functional plane of prosthetic knee joints.
    keywords: angle; control; fig; gait; knee; phase; simulator
       cache: fumecheng-1371.pdf
  plain text: fumecheng-1371.txt

        item: #190 of 526
          id: fumecheng-13730
      author: He, Chun-Hui; He, Ji-Huan; Ma, Jinfeng; Alsolami, Abdulrahman Ali; Yang, Xiao-Jun
       title: A MODIFIED FREQUENCY FORMULATION FOR NONLINEAR MECHANICAL VIBRATIONS
        date: 2025
       words: 5704
      flesch: 47
     summary: The paper elucidates the characteristics of nonlinear oscillators that contain quasi-linear terms arising in mechanical engineering. Analytical solutions for this type of nonlinear oscillator are often difficult to obtain; they may involve singular and discontinuous terms, which can make them significantly more difficult to obtain.
    keywords: formulation; frequency; frequency formulation; method; nonlinear; oscillators; vibration
       cache: fumecheng-13730.pdf
  plain text: fumecheng-13730.txt

        item: #191 of 526
          id: fumecheng-13732
      author: He, Ji-Huan; Ma, Jinfeng; Alsolami, Abdulrahman Ali; He, Chun-Hui
       title: VARIATIONAL APPROACH TO MICRO-ELECTRO-MECHANICAL SYSTEMS
        date: 2025
       words: 7625
      flesch: 50
     summary: (1) in the following form: 2 0w w w w w m + − − − = (13) Within the domain of fractal MEMS systems, the two-scale fractal concept finds several pivotal applications: 1) Modeling Complex Geometries: Fractal MEMS devices often have complex geometries that cannot be accurately described by traditional geometric models.
    keywords: derivative; fractal; fractional; instability; m w; mems; principle; pull; systems; w w; − −
       cache: fumecheng-13732.pdf
  plain text: fumecheng-13732.txt

        item: #192 of 526
          id: fumecheng-13737
      author: He, Chun-Hui; Mohammadian, Mostafa
       title: A FAST INSIGHT INTO HIGH-ACCURACY NONLINEAR FREQUENCY ESTIMATION OF STRINGER-STIFFENED SHELLS
        date: 2025
       words: 9269
      flesch: 61
     summary: A k A d u du u u u u u u t dt dtk A A dt             + +    − + u u uu u u u u u u     + + + +  + =       (18)
    keywords: frequency; nonlinear; shell; stringer; u u;  +;  ;  ;  
       cache: fumecheng-13737.pdf
  plain text: fumecheng-13737.txt

        item: #193 of 526
          id: fumecheng-13750
      author: Roman, Raul-Cristian; Precup, Radu-Emil; Petriu, Emil M.
       title: ACTIVE DISTURBANCE REJECTION CONTROL AND MODEL-FREE CONTROL TUNED VIA FICTITIOUS REFERENCE ITERATIVE TUNING
        date: 2025
       words: 6999
      flesch: 48
     summary: Precup, R.-E., Roman, R.-C., Teban, T.-A., Albu, A., Petriu, E. M., Pozna, C., 2020, Model-free control of finger dynamics in prosthetic hand myoelectric-based control systems, Studies in Informatics and Control, 29(4), pp. Within contemporary control systems, data-driven algorithms assume an increasingly pivotal role by using empirical data to design controllers with minimal reliance on explicit mathematical models, which is important in coping with Received:
    keywords: adrc; algorithm; control; crane; data; disturbance; frit; mfc; model; reference; step; system; time
       cache: fumecheng-13750.pdf
  plain text: fumecheng-13750.txt

        item: #194 of 526
          id: fumecheng-1379
      author: Selimli, Selcuk; Recebli, Ziyaddin; Ulker, Semra
       title: SOLAR VACUUM TUBE INTEGRATED SEAWATER DISTILLATION - AN EXPERIMENTAL STUDY
        date: 2016
       words: 3142
      flesch: 48
     summary: Ketrez, M., Usta, H., Cay, Y., 2012, Heat pump assisted solar energy water distillation, Journal of Sanitary Engineering, 127, pp. Aybar, H.S., 2006, Mathematical modelling of and inclined solar water distillation system, Desalination, 190, pp.
    keywords: distillation; energy; glass; heat; solar; tube; vacuum; water
       cache: fumecheng-1379.pdf
  plain text: fumecheng-1379.txt

        item: #195 of 526
          id: fumecheng-13862
      author: Yalçın, Galip Cihan
       title: DEVELOPMENT OF A FUZZY-BASED DECISION SUPPORT SYSTEM FOR SUSTAINABLE TRACTOR SELECTION IN GREEN PORTS
        date: 2025
       words: 11131
      flesch: 49
     summary: The primary objective of this study is to develop a decision support system (DSS) for the selection of tractors suitable for green port operations. Based on the findings, practical implications and recommendations were provided to support decision-making processes in green port operations.
    keywords: criteria; decision; energy; green; h h; h vh; hamacher; hybrid; method; port; selection; terminal; tractor; vh aa; ą 𝐶ąţ; ̃ �; � ̃; 𝐶ąţ 𝐶ąţ
       cache: fumecheng-13862.pdf
  plain text: fumecheng-13862.txt

        item: #196 of 526
          id: fumecheng-13939
      author: Xu, Li
       title: FAULT-TOLERANT CONTROL OF LOW-ALTITUDE UNMANNED AERIAL VEHICLE SWARMS USING A REDUCED-ORDER SLIDING MODE OBSERVER
        date: 2025
       words: 9272
      flesch: 70
     summary: [24] established the diagnosis and isolation of UAV swarm faults through multi-sensor fusion and applied a global decision logic, but failed to compensate for the faults. Some transitions are inevitable in the dynamic adjustment of UAV systems, while others are caused by external interference noise.
    keywords: actuator; axis; b b; control; fault; system; t t; t z; uav;  
       cache: fumecheng-13939.pdf
  plain text: fumecheng-13939.txt

        item: #197 of 526
          id: fumecheng-1395
      author: Borgiani, Edoardo; Duda, Georg; Willie, Bettina; Checa, Sara
       title: BONE HEALING IN MICE: DOES IT FOLLOW GENERIC MECHANO-REGULATION RULES?
        date: 2015
       words: 4690
      flesch: 49
     summary: The aim of this study is to investigate whether mechanical “rules” explaining tissue formation patterns during bone healing in rat can be translated to a mouse model of bone regeneration. It is well known that the course of bone healing is related to mechanical stability, which in turn influences the local mechanical conditions within the callus.
    keywords: bone; bone healing; compression; formation; fracture; healing; loading; mice; model; tissue
       cache: fumecheng-1395.pdf
  plain text: fumecheng-1395.txt

        item: #198 of 526
          id: fumecheng-14002
      author: Božanić, Darko; Puška, Adis; Tešić, Duško; Štilić, Anđelka; Ullah, Kifayat; Muhsen, Yousif Raad; Hezam, Ibrahim M.
       title: FUZZY AHP - FUZZY MABAC MODEL FOR RANKING A COMBINED CONSTRUCTION MACHINE - BACKHOE LOADER
        date: 2025
       words: 8854
      flesch: 57
     summary: Finally, fuzzy weight coefficients for each criterion, calculated separately for each expert, are defuzzified using Eq. Bozbura, F.T., Beskese, A., Kahraman, C., 2007, Prioritization of human capital measurement indicators using fuzzy AHP, Expert Systems with Applications, 32, pp. 1100–1112. 51.
    keywords: ahp; backhoe; construction; criteria; criterion; decision; fig; fuzzy; making; method; model; ranking; weight
       cache: fumecheng-14002.pdf
  plain text: fumecheng-14002.txt

        item: #199 of 526
          id: fumecheng-14015
      author: Choi, Sooyong; Chen, Chih-Ming; Hwang, Byungil
       title: CU-CU MECHANICAL BONDING FOR 3D INTEGRATION OF THE NEXT GENERATION ELECTRONIC CHIPS: INTERFACIAL MECHANISMS, SURFACE ENGINEERING, AND EMERGING LOW-TEMPERATURE STRATEGIES
        date: 2025
       words: 11938
      flesch: 53
     summary: Lee, S., Park, S., Kim, S.E., 2023, Low-temperature diffusion of Au and Ag nanolayers for Cu bonding, Applied Sciences, 14(1), 147. In SAB, an ion or high-velocity atomic beam is used to activate the bonding surfaces in a UHV environment, facilitating the formation of chemical bonds between Cu surfaces at room temperature [62].
    keywords: chen; copper; cu bonding; cu films; cu surface; direct; fig; grain; high; interface; journal; layer; materials; passivation; roughness; strength; surface; temperature; temperature cu; void; ° c
       cache: fumecheng-14015.pdf
  plain text: fumecheng-14015.txt

        item: #200 of 526
          id: fumecheng-141
      author: Madić, Miloš; Radovanović, Miroslav
       title: POSSIBILITIES OF USING MONTE CARLO METHOD FOR SOLVING MACHINING OPTIMIZATION PROBLEMS
        date: 2014
       words: 3505
      flesch: 38
     summary: Monte Carlo method enables determination of a majority of solutions, Possibilities of Using Monte Carlo Method for Solving Machining Optimization Problems 35  Monte Carlo methods have been used for a long time but only in the last few decades, they have gained the status of fully rounded numerical methods.
    keywords: carlo; carlo method; machining; machining optimization; method; monte; monte carlo; optimization; problems
       cache: fumecheng-141.pdf
  plain text: fumecheng-141.txt

        item: #201 of 526
          id: fumecheng-1429
      author: Trajanović, Miroslav; Canciglieri Jr, Osiris
       title: FOREWORD
        date: 2015
       words: 643
      flesch: 33
     summary: Biomedical engineering is one of the youngest branches of engineering which deals with the application of engineering methods to solving problems in medicine. The real development of biomedical engineering happened after WW II.
    keywords: bme; engineering
       cache: fumecheng-1429.pdf
  plain text: fumecheng-1429.txt

        item: #202 of 526
          id: fumecheng-1521
      author: Li, Qiang
       title: LIMITING PROFILE OF AXISYMMETRIC INDENTER DUE TO THE INITIALLY DISPLACED DUAL-MOTION FRETTING WEAR
        date: 2016
       words: 2960
      flesch: 66
     summary: Recently the final worn shape of elastic indenters due to fretting wear was analytically solved using the method of dimensionality reduction. Recently, a new method known as that of dimensionality reduction (MDR) was applied to analyzing the process of fretting wear as well as its final ‘shake down’ state for arbitrary axisymmetric shape of elastic or viscoelastic indenter [9-11].
    keywords: fretting; indenter; limiting; profile; wear
       cache: fumecheng-1521.pdf
  plain text: fumecheng-1521.txt

        item: #203 of 526
          id: fumecheng-154
      author: Milutinović, Biljana; Stefanović, Gordana; Vučković, Goran; Tomić, Mladen; Đekić, Petar
       title: THE EFFECT OF ENVIRONMENTAL INDICATORS TO THE WASTE TREATMENT SCENARIOS RANKING
        date: 2015
       words: 5918
      flesch: 40
     summary: Different waste treatment scenarios have different effects on the environment, which is expressed through a variety of environmental indicators. Four experiments were conducted in order to assess the influence of environmental indicators: the first experiment was done using four indicators, the second by using seven indicators, the third experiment by using nine indicators, and the fourth experiment by twelve indicators.
    keywords: air; emission; energy; environment; indicators; ranking; scenario; treatment; waste; water
       cache: fumecheng-154.pdf
  plain text: fumecheng-154.txt

        item: #204 of 526
          id: fumecheng-155
      author: Popov, Valentin L.; Hess, Markus
       title: METHOD OF DIMENSIONALITY REDUCTION IN CONTACT MECHANICS AND FRICTION: A USERS HANDBOOK. I. AXIALLY-SYMMETRIC CONTACTS
        date: 2014
       words: 4829
      flesch: 69
     summary: Examples for adhesive normal contacts Inserting the MDR transformed profiles into Eqs. [6], and Ciavarella [7] about a close relationship between normal and tangential contacts, the solutions of Galanov and Borodich [8, 9, 10] Received February 20, 2014 / Accepted March 18, 2014 Corresponding author: Valentin Popov TU Berlin, Department of System Dynamics and Physics of Friction, Berlin, Germany E-mail: v.popov@tu-berlin.de Original scientific paper 2 V. POPOV, M. HESS for adhesive contacts of axially-symmetric profiles of power functions (later found independently by Yao and Gao
    keywords: contact; fig; force; mdr; popov; profile
       cache: fumecheng-155.pdf
  plain text: fumecheng-155.txt

        item: #205 of 526
          id: fumecheng-1577
      author: Madić, Miloš; Kovačević, Marko; Radovanović, Miroslav; Blagojević, Vladislav
       title: SOFTWARE TOOL FOR LASER CUTTING PROCESS CONTROL – SOLVING REAL INDUSTRIAL CASE STUDIES
        date: 2016
       words: 4495
      flesch: 43
     summary: 2 Complexity of laser cutting process as MIMO machining process As shown in Fig. 2, a set of different parameters affect laser cutting process, wherein the character of the influence of certain parameter can be different taking into account interaction with other process parameters.
    keywords: co2; control; cutting; laser; parameters; process; software
       cache: fumecheng-1577.pdf
  plain text: fumecheng-1577.txt

        item: #206 of 526
          id: fumecheng-158
      author: Jovanović, Vesna; Janošević, Dragoslav; Petrović, Nikola
       title: EXPERIMENTAL DETERMINATION OF BEARING LOADS IN ROTATING PLATFORM DRIVE MECHANISMS OF HYDRAULIC EXCAVATORS
        date: 2014
       words: 5102
      flesch: 48
     summary: i M r r W r r F M = = = − × + − × +∑ ∑ r r rr r r r r (22) where is the vector of the position of the joint centre (slewing bearing) O2r r 2. Excavators 159 Table 1 Measured quantities of the state of the kinematic chain and excavator drive mechanisms Measuring spot Name of the measured quantity Symbol Dimension М1 Lifting of the support and movement mechanism c1 m М2 Platform rotation angle c2 о М3 Boom hydraulic cylinder motion c3 m
    keywords: bearing; chain; drive; excavator; kinematic; member; platform; quantities; r r
       cache: fumecheng-158.pdf
  plain text: fumecheng-158.txt

        item: #207 of 526
          id: fumecheng-1617
      author: Nguyen, Viet Anh; Zehn, Manfred; Marinković, Dragan
       title: AN EFFICIENT CO-ROTATIONAL FEM FORMULATION USING A PROJECTOR MATRIX
        date: 2016
       words: 5311
      flesch: 58
     summary: Tangent element stiffness matrix The tangent element stiffness matrix, expressed in the global coordinate system, can be calculated by the variation of the global internal element forces with respect to the global element displacements In addition, the internal element forces and element stiffness matrix are computed using directly the consistent variations of the internal element energy with respect to the global displacements.
    keywords: element; formulation; linear; matrix; rotation; t t
       cache: fumecheng-1617.pdf
  plain text: fumecheng-1617.txt

        item: #208 of 526
          id: fumecheng-1629
      author: Oveisi, Atta; Nestorović, Tamara
       title: MU-SYNTHESIS BASED ACTIVE ROBUST VIBRATION CONTROL OF AN MRI INLET
        date: 2016
       words: 5541
      flesch: 54
     summary: Roozen, N.B., Koevoets, A.H., den Hamer, A.J., 2008, Active vibration control of gradient coils to reduce acoustic noise of MRI systems, IEEE/ASME Transactions on Mechatronics, 13(3). The problem of structural vibration and acoustic noise in the MRI scanners is an important challenge in the development of the technology in these devices that can be addressed properly by active vibration control and active noise control.
    keywords: actuator; control; controller; fig; frequency; mri; noise; order; oveisi; structure; system; vibration
       cache: fumecheng-1629.pdf
  plain text: fumecheng-1629.txt

        item: #209 of 526
          id: fumecheng-1634
      author: Kraft, Adrian; Pohrt, Roman
       title: REDUCTION OF RESIDUAL SHEAR STRESS IN THE LOADED CONTACT USING FRICTION HYSTERESIS
        date: 2016
       words: 3631
      flesch: 69
     summary: We study the evolution of shear stress when the indenter is moved back and forth at falling amplitude. Initially, the pure normal loading can take place without inducing shear stress in Received February 24, 2016 / Accepted July 10, 2016 Corresponding author: Roman Pohrt Technische Universität Berlin, Straße des 17.
    keywords: area; contact; indenter; reversal; shear; stick; stress
       cache: fumecheng-1634.pdf
  plain text: fumecheng-1634.txt

        item: #210 of 526
          id: fumecheng-1637
      author: Rohwer, Klaus
       title: MODELS FOR INTRALAMINAR DAMAGE AND FAILURE OF FIBER COMPOSITES - A REVIEW
        date: 2016
       words: 9853
      flesch: 56
     summary: As an important physical effect the difference between fiber failure and inter-fiber failure is considered. Fiber failure (FF) is modeled by a maximum stress criterion in fiber direction with some modifications accounting for effects of transverse stresses, whereas matrix failure is predicted using a quadratic interaction of axial, transverse, and shear stresses.
    keywords: compos; composites; compressive; criteria; criterion; damage; failure; fiber; laminates; matrix; model; sci; shear; strength; stress; technol; transverse
       cache: fumecheng-1637.pdf
  plain text: fumecheng-1637.txt

        item: #211 of 526
          id: fumecheng-1662
      author: Mladenović, Srđan; Milosavljević, Peđa; Milojević, Nevena; Pavlović, Dragan; Todorović, Milena
       title: THE PATH TOWARDS ACHIEVING A LEAN SIX SIGMA COMPANY USING THE EXAMPLE OF THE SHINWON COMPANY IN SERBIA
        date: 2016
       words: 2594
      flesch: 51
     summary: PRODUCTION PROCESS IN THE SHINWON COMPANY In this paper we will particularly pay attention to the production process as one of the basic processes of implementation in the company. The Pareto diagram visually shows which production process is the most commonly interrupted, or which process is the most critical (Fig. 3).
    keywords: company; diagram; process; production; quality; sigma
       cache: fumecheng-1662.pdf
  plain text: fumecheng-1662.txt

        item: #212 of 526
          id: fumecheng-1667
      author: Stefanović-Marinović, Jelena; Troha, Sanjin; Milovančević, Miloš
       title: AN APPLICATION OF MULTICRITERIA OPTIMIZATION TO THE TWO-CARRIER TWO-SPEED PLANETARY GEAR TRAINS
        date: 2017
       words: 4463
      flesch: 58
     summary: Planetary gear transmissions are the subject of some papers in which the research relevant to the optimizations given. Planetary gear trains (PGT) are a type of gear trains with many advantages.
    keywords: carrier; gear; objective; optimization; ratio; shafts; speed; trains; transmission
       cache: fumecheng-1667.pdf
  plain text: fumecheng-1667.txt

        item: #213 of 526
          id: fumecheng-1689
      author: Rademacher, Tobias; Zehn, Manfred
       title: MODAL TRIGGERED NONLINEARITIES FOR DAMAGE LOCALIZATION IN THIN WALLED FRC STRUCTURES – A NUMERICAL STUDY
        date: 2016
       words: 5978
      flesch: 55
     summary: 6 Linear NLDI (left) and reciprocal rNLDI (right) nonlinear damage index. Coupling of nonlinear-measure, modal strain and damage Using a suitable combination of linear modal description of the original structure and nonlinear measure λr associated with damage-induced changes, a spatial damage index, nonlinear damage index NLDIi, could be formulated in a similar way as was done by Montalvão, Ribeiro and Duarte Silva
    keywords: damage; fig; index; localization; modal; nonlinear; nonlinearities; structures; vibration
       cache: fumecheng-1689.pdf
  plain text: fumecheng-1689.txt

        item: #214 of 526
          id: fumecheng-1750
      author: Chandrasekhar, Suresh; Sharma, Vaarin Majumdar
       title: BROWNIAN HEAT TRANSFER ENHANCEMENT IN THE TURBULENT REGIME
        date: 2016
       words: 3441
      flesch: 58
     summary: It means the flow is fully developed in terms of heat transfer in that region which is in agreement with [23]. Takabi, B., Shokouhmand, H., 2015, Effects of Al2O3-Cu/water hybrid nanofluid on heat transfer and flow characteristics in turbulent regime, International Journal of Modern Physics C, 26(4), 1550047. 14.
    keywords: heat; nanofluid; transfer; water
       cache: fumecheng-1750.pdf
  plain text: fumecheng-1750.txt

        item: #215 of 526
          id: fumecheng-182
      author: Peredo Fuentes, Humberto; Zehn, Manfred
       title: APPLICATION OF THE CRAIG-BAMPTON MODEL ORDER REDUCTION METHOD TO A COMPOSITE STRUCTURE: MAC AND XOR
        date: 2014
       words: 5263
      flesch: 60
     summary: INTRODUCTION Many techniques have been proposed to obtain reduced order finite element models (known as model order reduction (MOR) methods) by reducing the order of mass and stiffness matrices of structures made of conventional materials 6 Cross orthogonality MAC (XOR): higher frequencies  reduced vs. full model 46 H. PEREDO FUENTES, M. ZEHN Fig. 7 FRF(blue) and fitting curve (green) of composite model at node 183y 8.
    keywords: analysis; craig; fig; frequency; mac; matrix; method; model; order; reduced; results; stiffness; structure
       cache: fumecheng-182.pdf
  plain text: fumecheng-182.txt

        item: #216 of 526
          id: fumecheng-1854
      author: Gudarzi, Mohammad
       title: RELIABLE ROBUST CONTROLLER FOR HALF-CAR ACTIVE SUSPENSION SYSTEMS BASED ON HUMAN-BODY DYNAMICS
        date: 2016
       words: 4331
      flesch: 59
     summary: In addition to aforementioned aspects, another important goal of the controller design for active suspension systems is to maintain the robustness of the closed-loop systems [11]. The above review indicates that while there exists a notable body of literature on the active car suspension control, a comprehensive investigation on active suspension systems considering accurate human biodynamics based on robust non-fragile controller design seem to be absent.
    keywords: car; controller; suspension; systems; t t; z t
       cache: fumecheng-1854.pdf
  plain text: fumecheng-1854.txt

        item: #217 of 526
          id: fumecheng-187
      author: Petrescu, Florian Ion Tiberiu; Petrescu, Relly Victoria Virgil
       title: HIGH EFFICIENCY GEAR
        date: 2014
       words: 3368
      flesch: 77
     summary: 51 - 60 HIGH EFFICIENCY GEARS  UDC (621.8) Florian Ion Petrescu, Relly Victoria Petrescu Polytechnic University of Bucharest, Romania Abstract: The paper presents an original method for determining gear efficiency, gearing forces, velocities and powers. It analyzes the way in which certain parameters affect gear efficiency.
    keywords: cos;  ;  ;  ;  
       cache: fumecheng-187.pdf
  plain text: fumecheng-187.txt

        item: #218 of 526
          id: fumecheng-1905
      author: Bojić, Nada; Milčić, Dragan; Banić, Milan; Mijajlović, Miroslav; Nikolić, Ružica
       title: RADIAL FORCE IMPACT ON THE FRICTION COEFFICIENT AND TEMPERATURE OF A SELF-LUBRICATING PLAIN BEARING
        date: 2017
       words: 4289
      flesch: 49
     summary: The increase of friction coefficient value is probably a consequence of plastic saturation of the contact. However, as clearly shown in the figure, the average value of friction coefficient is µ = 0.039.
    keywords: bearing; force; friction; friction coefficient; graphite; load; self; temperature; value
       cache: fumecheng-1905.pdf
  plain text: fumecheng-1905.txt

        item: #219 of 526
          id: fumecheng-1955
      author: Nikolić, Boban; Jovanović, Miloš; Milošević, Miloš; Milanović, Saša
       title: FUNCTION K - AS A LINK BETWEEN FUEL FLOW VELOCITY AND FUEL PRESSURE, DEPENDING ON THE TYPE OF FUEL
        date: 2017
       words: 6699
      flesch: 58
     summary: FUNCTION K - AS A LINK BETWEEN FUEL FLOW VELOCITY AND FUEL PRESSURE, DEPENDING ON THE TYPE OF FUEL FACTA UNIVERSITATIS Series: Mechanical Engineering Vol. 15, No 1, 2017, pp. 119 - 132 DOI: 10.22190/FUME160628003N © 2017 by University of Niš, Serbia | Creative Commons Licence: CC BY-NC-ND Original scientific paper FUNCTION K - AS A LINK BETWEEN FUEL FLOW VELOCITY AND FUEL PRESSURE, DEPENDING ON THE TYPE OF FUEL UDC 629.3:629.06 Boban Nikolić, Miloš Jovanović, Miloš Milošević, Saša Milanović Faculty of Mechanical Engineering, University of Niš, Serbia Abstract.
    keywords: biodiesel; density; diesel; flow; fuel; injection; oil; pressure; sound; speed; velocity;  
       cache: fumecheng-1955.pdf
  plain text: fumecheng-1955.txt

        item: #220 of 526
          id: fumecheng-1972
      author: Ristić, Miloš; Manić, Miodrag; Mišić, Dragan; Kosanović, Miloš; Mitković, Milorad
       title: IMPLANT MATERIAL SELECTION USING EXPERT SYSTEM
        date: 2017
       words: 4839
      flesch: 46
     summary: Thus, we develop an expert system which should help or replace humans in the process of Implant material selection. Due to the rule based system and fuzzy logic a framework for fuzzy expert system for implant material selection development was created.
    keywords: expert; expert system; feature; feature_has_value; implant; knowledge; material; material selection; model; selection; system
       cache: fumecheng-1972.pdf
  plain text: fumecheng-1972.txt

        item: #221 of 526
          id: fumecheng-2032
      author: Sahdev, Ravinder Kumar; Kumar, Mahesh; Dhingra, Ashwani Kumar
       title: FORCED CONVECTION DRYING OF INDIAN GROUNDNUT: AN EXPERIMENTAL STUDY
        date: 2017
       words: 4326
      flesch: 63
     summary: Re ×10 4 Pr 30 29.9 25.83 24.3 38.78 1.87 0.6982 60 44.5 35.33 11.7 22.75 1.74 0.6963 90 45.7 36.52 8.1 19.88 1.73 0.6961 120 46.5 36.98 4.5 19.12 1.72 0.6960 150 46.8 37.42 3.2 18.42 1.72 0.6959 Table 4 Values of C, n, hc, and he C n hc (W/m 2 o C) hc, avg (W/m 2 o C) he (W/m 2 o C) he, avg (W/m 2 o C) 0.98 0.31 2.45 – 2.49 2.48 28.08 – 38.73 35.08 474 R. K. SAHDEV, M. KUMAR, A. K. DHINGRA From Table 3, it is observed that the rate of moisture removal is faster in the initial stage and decreases with the increase in drying time. Studies to evaluate the important parameters such as CHTC and EHTC for designing a dryer for groundnut drying have not been found.
    keywords: chtc; convection; dryer; drying; experimental; groundnut; heat; ifcd
       cache: fumecheng-2032.pdf
  plain text: fumecheng-2032.txt

        item: #222 of 526
          id: fumecheng-205
      author: Simonović, Julijana; Karličić, Danilo; Cajić, Milan
       title: ENERGY ANALYSIS OF FREE TRANSVERSE VIBRATIONS OF THE VISCO-ELASTICALLY CONNECTED DOUBLE-MEMBRANE SYSTEM
        date: 2014
       words: 6217
      flesch: 66
     summary: -0.75 ± 4.28i 0 ± 4.17i -0.53 ± 5.87i -0.22 ± 4.27i -0.27 ± 4.16i -0.23 ± 3.06i -0.5 ± 4.25i 0 ± 4.16i -0.75 ± 4.53i 0± 4.16i -0.57 ± 6.02i -0.18 ± 4.34i -0.32 ± 4.26i -0.18 ± 3.16i -0.5 ± 4.43i 0 ± 4.16i -0.27 ± 4.29i -0.1 ± 2.22i -0.28 ± 4.29i -0.09 ± 3.05i 200 λ1,2(1) λ1,2(2)
    keywords: energy; membrane; system; t t
       cache: fumecheng-205.pdf
  plain text: fumecheng-205.txt

        item: #223 of 526
          id: fumecheng-2094
      author: Ranđelović, Saša; Milutinović, Mladomir; Blagojević, Vladislav
       title: DEEP DRAWING TECHNOLOGY WITH WALL IRONING IN MASS PACKAGING INDUSTRY
        date: 2017
       words: 4589
      flesch: 58
     summary: The production process for aluminum cans is already technologically very advanced, and therefore it is useful to have the most information possible on material and tooling in order to optimize it. Lee M.S., Kim S.J., Lim O.D., Kang C.G., 2016, The effect process parameters on epoxy flow behavior and formability with CR340/CFRP composites by different laminating in deep drawing process, J. Mater.
    keywords: aluminum; cans; design; die; drawing; fig; force; ironing; mass; process; production; punch; wall
       cache: fumecheng-2094.pdf
  plain text: fumecheng-2094.txt

        item: #224 of 526
          id: fumecheng-2176
      author: Li, Qiang; Popov, Valentin L.
       title: INDENTATION OF FLAT-ENDED AND TAPERED INDENTERS WITH POLYGONAL CROSS-SECTIONS
        date: 2016
       words: 3186
      flesch: 60
     summary: 2 Factor β for different polygonal indenters. The numerical indentation tests were carried out for different indenters with power function n from 1 to 20 and the polygonal base parameter m from 3 to 30.
    keywords: contact; indentation; indenters; mdr; power; profile
       cache: fumecheng-2176.pdf
  plain text: fumecheng-2176.txt

        item: #225 of 526
          id: fumecheng-2199
      author: Mitrev, Rosen; Savov, Simeon
       title: A THEORETICAL-EXPERIMENTAL APPROACH FOR ELASTO-DAMPING PARAMETERS ESTIMATION OF CONE INERTIAL CRUSHER MOUNTING
        date: 2017
       words: 4241
      flesch: 47
     summary: Blazy P., Zarogatsky L., Jdid E., 1994, Hamdadou M., Vibroinertial comminution — principles and performance, International Journal of Mineral Processing, 41(1-2), pp.33-51. 2. Savov S., 2014, Research of mechanical and technological parameters of cone inertial crushers type KID, Ph.D thesis, Mining and Geology University “St. Ivan Rilski”, Sofia, 221 p. 3. For this purpose, we should obtain theoretical relationships that relate stiffness, geometrical and inertial parameters of the system with natural frequencies that can be easily determined experimentally.
    keywords: cone; crusher; frequencies; inertial; parameters; system
       cache: fumecheng-2199.pdf
  plain text: fumecheng-2199.txt

        item: #226 of 526
          id: fumecheng-2209
      author: Kracht, Kerstin; Kletschkowski, Thomas
       title: FROM ART TO ENGINEERING: A TECHNICAL REVIEW ON THE PROBLEM OF VIBRATING CANVAS PART I: EXCITATION AND EFFORTS OF VIBRATION REDUCTION
        date: 2017
       words: 6623
      flesch: 57
     summary: This paper gives a summary of the 40 years of conservators‟ research on canvas vibration caused by various excitation scenarios and restorers‟ efforts to reduce mechanical load. The simultaneous reduction of vibration excitation of canvas is up to now an unresolved problem.
    keywords: art; canvas; engineering; excitation; exhibition; fig; grid; kracht; paintings; shock; transit; transport; vibration; walls
       cache: fumecheng-2209.pdf
  plain text: fumecheng-2209.txt

        item: #227 of 526
          id: fumecheng-2259
      author: Stamenković Atanasov, Marija; Karličić, Danilo; Kozić, Predrag; Janevski, Goran
       title: THERMAL EFFECT ON FREE VIBRATION AND BUCKLING OF A DOUBLE-MICROBEAM SYSTEM
        date: 2017
       words: 8110
      flesch: 67
     summary:        (56) 2 4 2 2 2 0 2 4 2 2 2 0 [( ) ( ) ] a l k F k k k k k b k c k            (32) 2 4 2 2 2 1 0[( ) ](1 ) ,xx xz n T n p n w nb d a l k F k k k k k      (33) 2 4 2 2 2 2 1 0[( ) ] .xx
    keywords: buckling; effect; k k; temperature; vibration; w w;  
       cache: fumecheng-2259.pdf
  plain text: fumecheng-2259.txt

        item: #228 of 526
          id: fumecheng-2275
      author: Willert, Emanuel; Li, Qiang; Popov, Valentin L.
       title: THE JKR-ADHESIVE NORMAL CONTACT PROBLEM OF AXISYMMETRIC RIGID PUNCHES WITH A FLAT ANNULAR SHAPE OR CONCAVE PROFILES
        date: 2016
       words: 3615
      flesch: 67
     summary: d d ( ) ( ) ( ) ( ) NF d E ha h                                (29) for fixed loads, and: 0 d ( ) ( ) ( ) ( ) dd h h                                (30) for fixed grips.
    keywords: concave; contact; punch
       cache: fumecheng-2275.pdf
  plain text: fumecheng-2275.txt

        item: #229 of 526
          id: fumecheng-228
      author: Heine, Christopher; Plagemann, Markus
       title: GENERAL APROACH TO MODELING NONLINEAR AMPLITUDE AND FREQUENCY DEPENDENT HYSTERESIS EFFECTS BASED ON EXPERIMENTAL RESULTS
        date: 2014
       words: 3246
      flesch: 55
     summary: These dependencies could be described by linear functions and constant model parameters. 4 Hysteresis curves for different excitation amplitudes (Type I)
    keywords: -0.5; amplitude; dependence; fig; frequency; hysteresis; model; parameters
       cache: fumecheng-228.pdf
  plain text: fumecheng-228.txt

        item: #230 of 526
          id: fumecheng-2307
      author: Lyashenko, Iakov A.
       title: TANGENTIAL DISPLACEMENT INFLUENCE ON THE CRITICAL NORMAL FORCE OF ADHESIVE CONTACT BREAKAGE IN BIOLOGICAL SYSTEMS
        date: 2016
       words: 3520
      flesch: 63
     summary: Normalized dependencies of critical normal force zF on tangential force xF for E * =G * at different values of λ: (a) “fixed-grips” loading conditions in both directions; (b) “fixed-load” conditions in the vertical direction and “fixed-grips” conditions in the tangential direction Influence of Tangential Displacement on Critical Normal Force of Adhesive Contact Breakage... 319 Normalized dependencies of critical tangential force xF on λ at zero value of normal force for the parameters of Fig.
    keywords: contact; displacement; force
       cache: fumecheng-2307.pdf
  plain text: fumecheng-2307.txt

        item: #231 of 526
          id: fumecheng-2311
      author: Bosiakov, Sergei; Vinokurova, Anastasiya; Dosta, Andrei
       title: CRANIOFACIAL STRESS PATTERNS AND DISPLACEMENTS AFTER ACTIVATION OF HYRAX DEVICE: FINITE ELEMENT MODELLING
        date: 2017
       words: 5743
      flesch: 52
     summary: Therefore, another objective is to evaluate the effect of the screw location on the stresses and displacements distributions in the craniofacial complex with and without palate cleft. 10, B show that the transversal displacements are the largest components of SULC total displacements after activation of Model 1.
    keywords: activation; cleft; displacements; fig; model; skull; stresses; sulc
       cache: fumecheng-2311.pdf
  plain text: fumecheng-2311.txt

        item: #232 of 526
          id: fumecheng-232
      author: Milovančević, Miloš; Veg, Aleksandar; Makedonski, Aleksandar; Stefanović Marinović, Jelena
       title: EMBEDDED SYSTEMS FOR VIBRATION MONITORING
        date: 2014
       words: 2947
      flesch: 41
     summary: The basic idea in the optimal micro configuration design is to meet the frame conditions that are required for pump aggregates vibration monitoring. The source of centrifugal pumps vibrations are mechanical, hydraulic and electrical processes caused by the pump construction, operating regime, exploitation and manufacturing technologies used.
    keywords: aggregate; condition; fig; measuring; monitoring; point; pump; signal; vibration
       cache: fumecheng-232.pdf
  plain text: fumecheng-232.txt

        item: #233 of 526
          id: fumecheng-2324
      author: Pakhaliuk, Vladimir; Poliakov, Aleksandr; Kalinin, Mikhail; Pashkov, Yevgenii; Gadkov, Pavel
       title: MODIFYING AND EXPANDING THE SIMULATION OF WEAR IN THE SPHERICAL JOINT WITH A POLYMERIC COMPONENT OF THE TOTAL HIP PROSTHESIS
        date: 2016
       words: 4506
      flesch: 55
     summary: Since the contact pressure in the above formulae is a power function with a negative degree, these relations give a decrease in wear factor depending on the increase of a contact pressure, which means a reduction of wear values that are not uniquely consistent with the physics of the process. The existing method of numerical wear simulation of the sliding couple in the spherical joint comprising a polymer element in terms of refining the calculation taking into account the parametric dependence of wear factor on the contact pressure according to ISO 14242-1 demands and of those during walking gait cycle, is improved.
    keywords: contact; factor; fig; gait; head; iso; wear
       cache: fumecheng-2324.pdf
  plain text: fumecheng-2324.txt

        item: #234 of 526
          id: fumecheng-2327
      author: Balokhonov, Ruslan; Romanova, Varvara; Panin, Alexey; Martynov, Sergey; Kazachenok, Marina
       title: NUMERICAL STUDY OF STRESS-STRAIN LOCALIZATION IN THE TITANIUM SURFACE MODIFIED BY AN ELECTRON BEAM TREATMENT
        date: 2016
       words: 2532
      flesch: 43
     summary: Plastic strain localization is found to depend on the grain yield strength. Plastic strain localization is most pronounced in titanium grains undergoing high resolved shear stresses, and the plastic strain localization bands assume a curvilinear form due to grain rotation.
    keywords: layer; localization; plastic; strain; stress; surface; titanium
       cache: fumecheng-2327.pdf
  plain text: fumecheng-2327.txt

        item: #235 of 526
          id: fumecheng-2328
      author: Kusche, Stephan
       title: THE BOUNDARY ELEMENT METHOD FOR VISCOELASTIC MATERIAL APPLIED TO THE OBLIQUE IMPACT OF SPHERES
        date: 2016
       words: 3618
      flesch: 67
     summary: His theory of normal contacts has been extended to tangential contact theories, considering partial slip [2-9]. In the field of elastic contact mechanics, the Boundary Element Method (BEM) is well established.
    keywords: contact; elastic; element; impact
       cache: fumecheng-2328.pdf
  plain text: fumecheng-2328.txt

        item: #236 of 526
          id: fumecheng-2329
      author: Tsukanov, Alexey; Psakhie, Sergey
       title: ADHESION EFFECTS WITHIN THE HARD MATTER – SOFT MATTER INTERFACE: MOLECULAR DYNAMICS
        date: 2016
       words: 5330
      flesch: 57
     summary: In the case of soft matter systems and systems having covalent bonds, the most typical terms in the potential energy functional of the bonded atoms are the bond stretching term, angle bending, Urey-Bradly 1-3 stretching term, dihedral or torsional angle bending and improper rotation or inversions term (Fig. 1). (2) The most famous all-atom force fields for soft matter systems are GROMACS
    keywords: adsorption; amino; carboxylic; dynamics; energy; fig; force; groups; ldh; matter; molecules; nanosheet; process; state; surface
       cache: fumecheng-2329.pdf
  plain text: fumecheng-2329.txt

        item: #237 of 526
          id: fumecheng-2333
      author: Poliakov, Aleksandr; Pakhaliuk, Vladimir; Lozinskiy, Nikolay; Kolesova, Marina; Bugayov, Pavel; Shtanko, Petro
       title: BIOSIMILAR ARTIFICIAL KNEE FOR TRANSFEMORAL PROSTHESES AND EXOSKELETONS
        date: 2016
       words: 3082
      flesch: 57
     summary: In order to reduce cross links deformations, the load in PAK, for the most part, is transferred from the femur to the tibia directly via bearing contact surfaces, following the centroids in relative elements movements. Artificial knee joints (AK) play an important role in man-machine systems such as transfemoral prosthesis, exoskeletons of lower limbs, two-legged robots, etc.
    keywords: contact; joint; knee; links; mechanism; pak; surfaces
       cache: fumecheng-2333.pdf
  plain text: fumecheng-2333.txt

        item: #238 of 526
          id: fumecheng-2345
      author: Hess, Markus; Popov, Valentin L.
       title: METHOD OF DIMENSIONALITY REDUCTION IN CONTACT MECHANICS AND FRICTION: A USER'S HANDBOOK. II. POWER-LAW GRADED MATERIALS
        date: 2016
       words: 6794
      flesch: 73
     summary:       ca 1 2 1 0 2* 2 2 2 2 ( , ) ( ) ( , ) [6] for normal contacts without adhesion and Chen et al.
    keywords: c k; contact; h k; k k; k r; n k
       cache: fumecheng-2345.pdf
  plain text: fumecheng-2345.txt

        item: #239 of 526
          id: fumecheng-2369
      author: Popov, Mikhail
       title: CRITICAL VELOCITY OF CONTROLLABILITY OF SLIDING FRICTION BY NORMAL OSCILLATIONS IN VISCOELASTIC CONTACTS
        date: 2016
       words: 3012
      flesch: 52
     summary: Sliding friction can be reduced substantially by applying ultrasonic vibration in the sliding plane or in the normal direction. One of the characteristics of the phenomenon is that, at a given frequency and amplitude of oscillation, the observed friction reduction diminishes with increasing sliding velocity.
    keywords: c z
       cache: fumecheng-2369.pdf
  plain text: fumecheng-2369.txt

        item: #240 of 526
          id: fumecheng-2391
      author: Marinković, Dragan
       title: FOREWORD
        date: 2016
       words: 442
      flesch: 34
     summary: This area has been experiencing rapid development in recent years. The wear behavior, temperature development and damping properties can be controlled by a targeted use of gradient materials.
    keywords: tribology
       cache: fumecheng-2391.pdf
  plain text: fumecheng-2391.txt

        item: #241 of 526
          id: fumecheng-2398
      author: Farhatnia, Fatemeh; Ghanbari-Mobarakeh, Mahsa; Rasouli-Jazi, Saeid; Oveissi, Soheil
       title: THERMAL BUCKLING ANALYSIS OF FUNCTIONALLY GRADED CIRCULAR PLATE RESTING ON THE PASTERNAK ELASTIC FOUNDATION VIA THE DIFFERENTIAL TRANSFORM METHOD
        date: 2017
       words: 8472
      flesch: 65
     summary: k k k k A                                                             1 1 1 1 1 1 1 0 0 ( 2)( 1) [ 1] ( 3)                       (30) 4.
    keywords: buckling; k k; k r; n k; r r; rr r; w k; w r; w w;  ;  ;  
       cache: fumecheng-2398.pdf
  plain text: fumecheng-2398.txt

        item: #242 of 526
          id: fumecheng-2441
      author: Rashid, Mohammed; Husain, Karim; Vitković, Nikola; Manić, Miodrag; Petrović, Slađana
       title: TOWARDS PATIENT SPECIFIC PLATE IMPLANTS FOR THE HUMAN LONG BONES: A DISTAL HUMERUS EXAMPLE
        date: 2018
       words: 4715
      flesch: 48
     summary: Musuvathy, S., Azernikov, S., Fang, T., 2011, Semi-automatic customization of internal fracture fixation plates, Engineering in Medicine and Biology Society, EMBC, 2011 Annual International Conference of the IEEE, Boston MA, Aug. 30 2011-Sept. 3, pp. In order to demonstrate the complexity of the elbow fractures, in Fig. 1 radiographs of 31 year old man with plate fixation are presented [31].
    keywords: bone; fixation; fractures; human; humerus; model; patient; plate; surface
       cache: fumecheng-2441.pdf
  plain text: fumecheng-2441.txt

        item: #243 of 526
          id: fumecheng-2442
      author: Husain, Karim; Rashid, Mohammed; Vitković, Nikola; Mitić, Jelena; Milovanović, Jelena; Stojković, Miloš
       title: GEOMETRICAL MODELS OF MANDIBLE FRACTURE AND PLATE IMPLANT
        date: 2018
       words: 4129
      flesch: 47
     summary: 3 Surface model of the mandible with defined fracture model and parametric points Predictive methods enable the creation of bone geometrical models by using various types of parametric (statistical) models.
    keywords: bone; fracture; implant; mandible; model; parametric; plate; process
       cache: fumecheng-2442.pdf
  plain text: fumecheng-2442.txt

        item: #244 of 526
          id: fumecheng-2453
      author: Kumar, Sunil; Dhingra, Ashwani Kumar; Singh, Bhim
       title: IMPLEMENTATION OF THE LEAN-KAIZEN APPROACH IN FASTENER INDUSTRIES USING THE DATA ENVELOPMENT ANALYSIS
        date: 2017
       words: 7478
      flesch: 52
     summary: 2 shows efficiency scores of quality system in all selected DMUs before and after Kaizen events implementation. In this research paper, the DEA CCR model with CRS is applied to assess the efficiency of quality system of ten small scale industries manufacturing fasteners (producing the same sort of products) by taking three inputs (manpower (no‟s), maintenance (%), training of employees (hours)) and two outputs (quality (%), on-time delivery (%)) of the quality system.
    keywords: analysis; data; dea; dmus; efficiency; implementation; industries; journal; kaizen; model; outputs; quality; system
       cache: fumecheng-2453.pdf
  plain text: fumecheng-2453.txt

        item: #245 of 526
          id: fumecheng-2466
      author: Krueger, Eddy; Scheeren, Eduardo M.; Rinaldin, Carla Daniele Pacheco; Lazzaretti, André E.; Neves, Eduardo Borba; Nogueira-Neto, Guilherme Nunes; Nohama, Percy
       title: IMPACT OF SKINFOLD THICKNESS ON WAVELET-BASED MECHANOMYOGRAPHIC SIGNAL
        date: 2018
       words: 3997
      flesch: 62
     summary: However, we found that to lowest frequency bands (<11 Hz) the magnitude is greater to group II (St> 20 mm). In a previously study [10] we found a negative correlation between skinfold thickness (ST) and MMG mean frequency, showing the ST can be considered as a natural selective filter
    keywords: frequency; group; mmg; muscle; wavelet
       cache: fumecheng-2466.pdf
  plain text: fumecheng-2466.txt

        item: #246 of 526
          id: fumecheng-2550
      author: Krstić, Vladislav; Milčić, Dragan; Milčić, Miodrag
       title: A THERMAL ANALYSIS OF THE THREADED SPINDLE BEARING ASSEMBLY IN NUMERICALLY CONTROLLED MACHINE TOOLS
        date: 2018
       words: 4638
      flesch: 55
     summary: Reference load for axial ball bearings for threaded spindles equals 2% of static load of the bearing for axial bearings with contact angle 45°< α <90° Mechanical gear may be: threaded gear (threaded spindle and nut), spur (sprocket) gear (pinion and rack) and timing (toothed) belt gear or chain gear.
    keywords: analysis; assembly; bearing; bearing assembly; contact; heat; machine; spindle; threaded
       cache: fumecheng-2550.pdf
  plain text: fumecheng-2550.txt

        item: #247 of 526
          id: fumecheng-2577
      author: Alkamachi, Ahmed; Ercelebi, Ergun
       title: MODELLING AND CONTROL OF H-SHAPED RACING QUADCOPTER WITH TILTING PROPELLERS
        date: 2017
       words: 5368
      flesch: 64
     summary: In addition to the above virtual control signals, rotor tilt angle α is used to control the forward/backward speed of the vehicle. With this tilting capability, the number of control inputs is increased to five (the four rotors spinning speeds plus the tilt angle).
    keywords: b b; control; fig; hcopter; model; quadcopter; rotor; speed; tilt
       cache: fumecheng-2577.pdf
  plain text: fumecheng-2577.txt

        item: #248 of 526
          id: fumecheng-2590
      author: Milošević, Miloš; Miltenović, Aleksandar; Banić, Milan; Tomić, Miša
       title: DETERMINATION OF RESIDUAL STRESS IN THE RAIL WHEEL DURING QUENCHING PROCESS BY FEM SIMULATION
        date: 2017
       words: 3825
      flesch: 54
     summary: Determination of the residual stress in the rail wheel is important for understanding the damage mechanisms and their influence on the proper work of rail wheels. The residual stresses in rail wheels can be caused mechanically due to wheel/rail operation, or due to the press fitting process of a bandage wheel, as well as during the quenching process.
    keywords: fig; process; rail; rail wheel; stress; temperature; wheel
       cache: fumecheng-2590.pdf
  plain text: fumecheng-2590.txt

        item: #249 of 526
          id: fumecheng-2660
      author: Miltenović, Aleksandar; Tica, Milan; Banić, Milan; Miltenović, Đorđe
       title: PREDICTION OF TEMPERATURE DISTRIBUTION IN THE WORM GEAR MESHING
        date: 2020
       words: 3607
      flesch: 56
     summary: Worm gear transmissions have number of advantages over other types of transmission, allowing them a wide scope of applications for the transfer of power and movement. The lack of worm gear transmission means a relatively low efficiency, especially for the extreme operating conditions primarily related to the high frequency of rotation.
    keywords: distribution; gear; losses; power; temperature; transmission; worm
       cache: fumecheng-2660.pdf
  plain text: fumecheng-2660.txt

        item: #250 of 526
          id: fumecheng-2682
      author: Li, Qiang; Popov, Valentin L.
       title: NORMAL LINE CONTACT OF FINITE-LENGTH CYLINDERS
        date: 2017
       words: 3592
      flesch: 60
     summary: Popov, V.L., Pohrt, R., Heß, M., 2016, General procedure for solution of contact problems under dynamic normal and tangential loading based on the known solution of normal contact problem, The Journal of Strain Analysis for Engineering Design, 51(4), pp. Recently an analytical solution for contact problem of toroidal indenter is given by Argatov et al.
    keywords: contact; cylinder; fig; length; line
       cache: fumecheng-2682.pdf
  plain text: fumecheng-2682.txt

        item: #251 of 526
          id: fumecheng-2694
      author: Rama, Gil
       title: A 3-NODE PIEZOELECTRIC SHELL ELEMENT FOR LINEAR AND GEOMETRICALLY NONLINEAR DYNAMIC ANALYSIS OF SMART STRUCTURES
        date: 2017
       words: 5269
      flesch: 57
     summary: All of them were also used in the development of piezoelectric shell elements. The next example illustrates the influence of geometrically nonlinear effects on the dynamic sensor response when piezoelectric plate structures are considered.
    keywords: analysis; element; fig; nonlinear; piezoelectric; plate; sensor; shell; structures
       cache: fumecheng-2694.pdf
  plain text: fumecheng-2694.txt

        item: #252 of 526
          id: fumecheng-2733
      author: Valvano, Stefano; Carrera, Erasmo
       title: MULTILAYERED PLATE ELEMENTS WITH NODE-DEPENDENT KINEMATICS FOR THE ANALYSIS OF COMPOSITE AND SANDWICH STRUCTURES
        date: 2017
       words: 11044
      flesch: 62
     summary: On the other hand, plate models with Layer-Wise (LW) capabilities can be implemented by describing the displacement components at the layer level, possibly by using a combination of Lagrange and Legendre-like polynomial as Fs thickness functions Single theory LW models show a good accuracy solution independently of the polynomial order, otherwise higher-order mono-model ESL theories with Taylor polynomial, ET3 and ET4, are required to obtain sufficient solution accuracy.
    keywords: analysis; case; composite; element; fig; models; multi; node; order; plate; stress; theories; theory; transverse
       cache: fumecheng-2733.pdf
  plain text: fumecheng-2733.txt

        item: #253 of 526
          id: fumecheng-2794
      author: Janković, Aleksandar; Antunović, Biljana; Preradović, Ljubiša
       title: ALTERNATIVE METHOD FOR ON SITE EVALUATION OF THERMAL TRANSMITTANCE
        date: 2017
       words: 4869
      flesch: 53
     summary: An effective and simple method for determination of thermal transmittance is in situ measurement, which is governed by the ISO 9869-1:2014 that defines heat flow meter method. The hot box method is mainly used for thermal transmittance measurements of inhomogeneous components such as windows, doors and thermal bridges in laboratory and cannot be used for in situ measurements.
    keywords: air; building; heat; hfm; method; surface; temperature; transmittance; wall
       cache: fumecheng-2794.pdf
  plain text: fumecheng-2794.txt

        item: #254 of 526
          id: fumecheng-2797
      author: Willert, Emanuel; Kusche, Stephan; Popov, Valentin L.
       title: THE INFLUENCE OF VISCOELASTICITY ON VELOCITY-DEPENDENT RESTITUTIONS IN THE OBLIQUE IMPACT OF SPHERES
        date: 2017
       words: 7621
      flesch: 62
     summary: A nice overview of elastic impact problems and several analytical solutions including torsional loading can be found in the paper by Jäger Jäger, J., 1993, Elastic contact of Equal Spheres under Oblique Forces, Archive of Applied Mechanics, 63(6), pp.
    keywords: contact; impact; j j; problem; viscoelastic
       cache: fumecheng-2797.pdf
  plain text: fumecheng-2797.txt

        item: #255 of 526
          id: fumecheng-2827
      author: Precup, Radu-Emil; Preitl, Stefan; Bojan-Dragos, Claudia-Adina; Radac, Mircea-Bogdan; Szedlak-Stinean, Alexandra-Iulia; Hedrea, Elena-Lorena; Roman, Raul-Cristian
       title: AUTOMOTIVE APPLICATIONS OF EVOLVING TAKAGI-SUGENO-KANG FUZZY MODELS
        date: 2017
       words: 5815
      flesch: 57
     summary: The examples of fuzzy models are validated against experimental results in case of the ABS and the first principles simulation results in the case of vehicle with the CVT. Precup, R.-E., Voisan, E.-I., Petriu, E.M., Radac, M.-B., Fedorovici, L.-O., 2015, Implementation of evolving fuzzy models of a nonlinear process, Proc.
    keywords: algorithms; applications; control; data; fuzzy; ieee; input; kang; models; precup; r.-e; sugeno; systems; takagi; time
       cache: fumecheng-2827.pdf
  plain text: fumecheng-2827.txt

        item: #256 of 526
          id: fumecheng-2830
      author: Zhang, Zhichao; Umek, Anton; Kos, Anton
       title: COMPUTERIZED RADIAL ARTERY PULSE SIGNAL CLASSIFICATION FOR LUNG CANCER DETECTION
        date: 2017
       words: 3274
      flesch: 56
     summary: Zuo, W.M., Wang, P., Zhang, D., 2016, Comparison of three different types of wrist pulse signals by their physical meanings and diagnosis performance, IEEE journal of biomedical and health informatics, 20(1), pp. Khaire, N.N., Joshi, Y.V., 2015, Diagnosis of disease using wrist pulse signal for classification of pre-meal and post-meal samples, Proc.
    keywords: artery; cancer; diagnosis; features; lung; lung cancer; pulse; signal
       cache: fumecheng-2830.pdf
  plain text: fumecheng-2830.txt

        item: #257 of 526
          id: fumecheng-2832
      author: Nedić, Novak N.; Prodanović, Saša Lj.; Dubonjić, Ljubiša M.
       title: DECOUPLING CONTROL OF TITO SYSTEM SUPPORTED BY DOMINANT POLE PLACEMENT METHOD
        date: 2017
       words: 3889
      flesch: 64
     summary: (7-9): 1 ( ) ( ) 0ii ig s k s   (7) 0      s KsKsK sss bsbsb ipd 11 2 1 01 2 2 3 01 2 2 aaa 1 (8) 3 2 2 2 2 1 0 2 1 0 1 1 1( a a a ) ( ) ( ) 0d p is s s s b s b s b K s K s K             (9) Equation (10) is a general form of the fourth-order characteristic equation. Another goal is to simplify the tuning procedure of PID controllers and enlarge the possibility for introducing the given approach into practice.
    keywords: control; placement; pole; s s
       cache: fumecheng-2832.pdf
  plain text: fumecheng-2832.txt

        item: #258 of 526
          id: fumecheng-2835
      author: Radiša, Radomir; Dučić, Nedeljko; Manasijević, Srećko; Marković, Nemanja; Ćojbašić, Žarko
       title: CASTING IMPROVEMENT BASED ON METAHEURISTIC OPTIMIZATION AND NUMERICAL SIMULATION
        date: 2017
       words: 5138
      flesch: 45
     summary: This paper presents the use of metaheuristic optimization techniques to support the improvement of casting process. This paper presents a methodology for improvement of casting process, demonstrated on the problem of design and optimization of the feeder’s geometry in the process of casting Pelton turbine bucket.
    keywords: casting; feeder; fig; optimization; process; r r; results; simulation; solidification
       cache: fumecheng-2835.pdf
  plain text: fumecheng-2835.txt

        item: #259 of 526
          id: fumecheng-2839
      author: Chatterjee, Prasenjit; Mondal, Supraksh; Boral, Soumava; Banerjee, Arnab; Chakraborty, Shankar
       title: A NOVEL HYBRID METHOD FOR NON-TRADITIONAL MACHINING PROCESS SELECTION USING FACTOR RELATIONSHIP AND MULTI-ATTRIBUTIVE BORDER APPROXIMATION METHOD
        date: 2017
       words: 7739
      flesch: 47
     summary: The weights of NTMP selection criteria were used to calculate overall scores for the possible NTMPs. Sadhu, A., Chakraborty, S., 2011, Non-traditional machining processes selection using data envelopment Analysis (DEA), Expert Systems with Applications, 38(7), pp. 8770-8781. 13.
    keywords: chakraborty; criteria; decision; machining; matrix; method; ntmp; process; selection; table
       cache: fumecheng-2839.pdf
  plain text: fumecheng-2839.txt

        item: #260 of 526
          id: fumecheng-2849
      author: Tomić, Miša; Milošević, Miloš; Tomić, Nevena; Pavlović, Nenad D.; Pavlović, Vukašin
       title: REMOTE CONTROL OF THE MECHATRONIC REDESIGNED SLIDER-CRANK MECHANISM IN SERVICE
        date: 2017
       words: 4448
      flesch: 48
     summary: Nagchaudhuri, A., 2002, Mechatronic redesign of slider crank mechanism, Proceedings of IMECE 2002 ASME International Mechanical Engineering Congress & Exposition, pp. In [15] a numerically comparative study on dynamic response of a planar slider–crank mechanism with two clearance joints between considering harmonic drive and link flexibility is conducted.
    keywords: control; crank mechanism; fig; mechatronic; motion; motor; position; slider; velocity
       cache: fumecheng-2849.pdf
  plain text: fumecheng-2849.txt

        item: #261 of 526
          id: fumecheng-285
      author: Rama, Gil
       title: AN AUTOMATIZED IN-PLACE ANALYSIS OF A HEAVY LIFT JACK-UP VESSEL UNDER SURVIVAL CONDITIONS
        date: 2014
       words: 4757
      flesch: 56
     summary: As a result of detailed determination of dynamic loads and consideration of soil properties by spring elements, the used capacities are able to be reduced by 28 %. Random wave time domain dynamic analysis (detailed method) The SDOF analogy is permissible for factored (see Eq. 12) values of 1 > fac > 0.5.
    keywords: analysis; conditions; fig; hljv; inertia; jack; loads; model; structure; thor; wave; wind
       cache: fumecheng-285.pdf
  plain text: fumecheng-285.txt

        item: #262 of 526
          id: fumecheng-2856
      author: Marković, Dušan; Petković, Dalibor; Nikolić, Vlastimir; Milovančević, Miloš; Denić, Nebojša
       title: DETERMINATION OF IMPORTANT PARAMETERS FOR PATENT APPLICATIONS
        date: 2017
       words: 2833
      flesch: 35
     summary: 307 - 313 DOI: 10.22190/FUME170511014M © 2017 by University of Niš, Serbia | Creative Commons Licence: CC BY-NC-ND Original scientific paper 1DETERMINATION OF IMPORTANT PARAMETERS FOR PATENT APPLICATIONS This research study is an analysis of patent applications based on different input parameters.
    keywords: applications; input; parameters; patent; patent applications; r&d; table
       cache: fumecheng-2856.pdf
  plain text: fumecheng-2856.txt

        item: #263 of 526
          id: fumecheng-2860
      author: Dimaki, Andrey V.; Pohrt, Roman; Popov, Valentin L.
       title: SIMULATION OF FRICTIONAL DISSIPATION UNDER BIAXIAL TANGENTIAL LOADING WITH THE METHOD OF DIMENSIONALITY REDUCTION
        date: 2017
       words: 4434
      flesch: 62
     summary: This proof can be easily generalized to an arbitrary two in-plane dimensions and shows that the transformation (17) can be applied separately to each component of tangential stress, so we can obtain tangential stresses in y-direction similar to Eq. [5], (see also Chapter 5 devoted to tangential contact in [6]).
    keywords: contact; fig; loading; mdr; plane; spring
       cache: fumecheng-2860.pdf
  plain text: fumecheng-2860.txt

        item: #264 of 526
          id: fumecheng-2877
      author: Kyrarini, Maria; Haseeb, Muhammad Abdul; Ristić-Durrant, Danijela; Gräser, Axel
       title: ROBOT LEARNING OF OBJECT MANIPULATION TASK ACTIONS FROM HUMAN DEMONSTRATIONS
        date: 2017
       words: 4760
      flesch: 53
     summary: The multiple human demonstrations are recorded and only the most similar demonstrations are selected for robot learning. Contrary to the above mentioned methods, which are based either on low- or on high- level learning, in this paper, a framework for robot learning which combines the high- level learning and low-level learning at the trajectory level is presented.
    keywords: actions; demonstrations; human; learning; level; object; robot; task; trajectory
       cache: fumecheng-2877.pdf
  plain text: fumecheng-2877.txt

        item: #265 of 526
          id: fumecheng-288
      author: Mikhasev, Gennadi I.; Mlechka, Ihnat R.
       title: ON INFLUENCE OF BOUNDARY CONDITIONS AND TRANSVERSE SHEAR ON BUCKLING OF THIN LAMINATED CYLINDRICAL SHELLS UNDER EXTERNAL PRESSURE
        date: 2014
       words: 5446
      flesch: 68
     summary: (16) Functions ,  and  are sought in the form: 1 4 2 1 1( )sin( ), ( )sin( ), ( )sin( )RX x p EhR F x p RS x p              , (17) where p is a wave number, and X(x), F(x), S(x) are unknown functions of x. The substitution of (15) – (17) into Eqs. F X p X dx               , 2 4 2 4 2 (1 ) 0 d F X dx         , (18) 41 2 S S      , (19) where 
    keywords: buckling; conditions; edges; k k; pressure; sandwich; shell
       cache: fumecheng-288.pdf
  plain text: fumecheng-288.txt

        item: #266 of 526
          id: fumecheng-2880
      author: Kostić, Vojkan; Mitrović, Nebojša; Banković, Bojan; Petronijević, Milutin
       title: THE MONOSPIRAL MOTORISED CABLE REEL IN CRANE APPLICATIONS
        date: 2017
       words: 6574
      flesch: 65
     summary: Due to the similar requirements for tension control, variable winding diameter and moment of inertia, individual experiences can be used to control cable reel drives [20]. Regardless of the way of realization, basic requirement for cable reel drive is maintaining a constant tensile force in the cable, which enables winding/ unwinding cable uniformly.
    keywords: cable; cable reel; control; crane; drive; induction; motor; power; speed; torque; winding
       cache: fumecheng-2880.pdf
  plain text: fumecheng-2880.txt

        item: #267 of 526
          id: fumecheng-2916
      author: Dmitriev, Andrey I.; Nikonov, Anton Yu.
       title: FEATURES OF THE Σ5 AND Σ9 GRAIN BOUNDARIES MIGRATION IN BCC AND FCC METALS UNDER SHEAR LOADING – A MOLECULAR DYNAMICS STUDY
        date: 2017
       words: 4017
      flesch: 55
     summary: Studies have shown that the behavior of grain boundaries such as, for example Σ9 (1 2 2)[011], under shear deformation may significantly differ from the behavior of the Σ5 grain boundary. The results of modeling the behavior of grain boundaries Σ5 in nickel sample show that under conditions of shear deformation the relative sliding of interacting grains is accompanied by displacement of boundary position in the direction perpendicular to the applied loading.
    keywords: boundary; deformation; grain; loading; plane; shear; structure
       cache: fumecheng-2916.pdf
  plain text: fumecheng-2916.txt

        item: #268 of 526
          id: fumecheng-2973
      author: Rudek, Marcelo; Gumiel, Yohan B.; Canciglieri Jr, Osiris; Asofu, Naomi; Bichinho, Gerson L.
       title: A CAD-BASED CONCEPTUAL METHOD FOR SKULL PROSTHESIS MODELLING
        date: 2018
       words: 4330
      flesch: 61
     summary: The descriptors are used to look for compatible CT images whose bone edge shape versus Bezier curve calculated by their descriptors have a minimum error. Good descriptors will permit us to retrieve compatible CT images to produce the skull prosthesis.
    keywords: bezier; curve; descriptors; edge; fig; image; points; prosthesis; skull
       cache: fumecheng-2973.pdf
  plain text: fumecheng-2973.txt

        item: #269 of 526
          id: fumecheng-2977
      author: Santoši, Željko; Budak, Igor; Šokac, Mario; Puškar, Tatjana; Vukelić, Đorđe; Trifković, Branka
       title: 3D DIGITIZATION OF FEATURELESS DENTAL MODELS USING CLOSE RANGE PHOTOGRAMMETRY AIDED BY NOISE BASED PATTERNS
        date: 2018
       words: 3460
      flesch: 46
     summary: 3D model obtained by approved professional optical 3D scanner as a reference was used. Images are captured and used to reconstruct and generate 3D models.
    keywords: digitization; light; models; object; pattern; photogrammetry; range; results
       cache: fumecheng-2977.pdf
  plain text: fumecheng-2977.txt

        item: #270 of 526
          id: fumecheng-2983
      author: Umek, Anton; Kos, Anton
       title: SMART EQUIPMENT DESIGN CHALLENGES FOR REAL TIME FEEDBACK SUPPORT IN SPORT
        date: 2018
       words: 5372
      flesch: 54
     summary: The same heterogeneity is expressed in the variety of sensor network technologies; from technologies that cover body area (BAN) to technologies that cover metropolitan area (MAN), from technologies with bitrates of a few kbit/s to technologies of a few hundreds of Mbit/s, from frequencies of 400 MHZ to frequencies of 60 GHz, etc. Mooney, R., Corley, G., Godfrey, A., Quinlan, L.R., ÓLaighin, G., 2015, Inertial sensor technology for elite swimming performance analysis: A systematic review, Sensors, 16(1), 18. 21.
    keywords: biofeedback; equipment; feedback; ieee; sensors; sport; system; technologies; time; wireless
       cache: fumecheng-2983.pdf
  plain text: fumecheng-2983.txt

        item: #271 of 526
          id: fumecheng-2995
      author: Atahyde, José N.; Fernandes, Beatriz L.; Siqueira, Carlos J. de M.; Nohama, Percy; Fernandes, Carlos R.
       title: DEVICE FOR IN VITRO WEAR ANALYSIS OF BIOMATERIALS IN THE HINGED PROSTHESIS CONFIGURATION
        date: 2018
       words: 3437
      flesch: 53
     summary: However, very few of them are found to be focused on unconventional knee prostheses (UNCKP). Au, A.G., Raso, J., Liggins, A.B., Amirfazli, A., 2007, Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements, Journal of Biomechanics, 40, pp.
    keywords: contact; device; knee; prosthesis; samples; test; uhmwpe; wear
       cache: fumecheng-2995.pdf
  plain text: fumecheng-2995.txt

        item: #272 of 526
          id: fumecheng-3026
      author: Gabbert, Ulrich; Duvigneau, Fabian; Ringwelski, Stefan
       title: NOISE CONTROL OF VEHICLE DRIVE SYSTEMS
        date: 2017
       words: 7194
      flesch: 49
     summary: These data from listening tests are used to create a psychoacoustic mathematical model which shows the highest correlation with the subjective evaluation of engine sounds. Then, it is applied to combustion engines, where several simulation results are presented to underline the complexity but also to demonstrate the advantages of the developed simulation approach.
    keywords: analysis; approach; control; engine; fig; gabbert; model; noise; pressure; simulation; sound; vibration
       cache: fumecheng-3026.pdf
  plain text: fumecheng-3026.txt

        item: #273 of 526
          id: fumecheng-3039
      author: Du, Hui; Carpenter, Kristen; Hui, David; Radonjic, Mileva
       title: MICROSTRUCTURE AND MICROMECHANICS OF SHALE ROCKS: CASE STUDY OF MARCELLUS SHALE
        date: 2017
       words: 3399
      flesch: 49
     summary: The yellow spots represent grains with higher mechanical properties, which clearly showed more in outcrops hardness map. Mechanical properties maps of Marcellus shale rock outcrop (left) and core3 (right) based on 100 nano-indentation test results (10x10 grid) Fig.
    keywords: clay; core; fig; indentation; marcellus; micro; outcrop; properties; rock; shale
       cache: fumecheng-3039.pdf
  plain text: fumecheng-3039.txt

        item: #274 of 526
          id: fumecheng-304
      author: Ali, Abdulrahim Haroun; Shamshirband, Shahaboddin; Anuar, Nor Badrul; Petković, Dalibor
       title: DFCL: DYNAMIC FUZZY LOGIC CONTROLLER FOR INTRUSION DETECTION
        date: 2014
       words: 3595
      flesch: 58
     summary: In this method, the resultant membership functions are developed by considering the union of the output of each rule, which means that the overlapping area of fuzzy output set is counted as one, providing more results. The close assent of output values obviously displays that fuzzy logic model can be used to predict output values under consideration Thus, the proposed fuzzy logic model gives a promising solution to predict output value in the specific range of parameter.
    keywords: artt; behavior; logic; network; output; packet; ping; pinger; rtt; system; time
       cache: fumecheng-304.pdf
  plain text: fumecheng-304.txt

        item: #275 of 526
          id: fumecheng-3069
      author: Nikolić, Vlastimir; Marinković, Dragan
       title: FOREWORD
        date: 2017
       words: 324
      flesch: 42
     summary: i Editorial FOREWORD Surely each one of you has encountered a situation which made you wonder about the importance of automatic control systems. And, as a matter of fact, the roots of automatic control systems may even be traced back to ancient times.
    keywords: systems
       cache: fumecheng-3069.pdf
  plain text: fumecheng-3069.txt

        item: #276 of 526
          id: fumecheng-309
      author: Ćojbašić, Žarko; Nikolić, Vlastimir; Petrović, Emina; Pavlović, Vukašin; Tomić, Miša; Pavlović, Ivan; Ćirić, Ivan
       title: A REAL TIME NEURAL NETWORK BASED FINITE ELEMENT ANALYSIS OF SHELL STRUCTURE
        date: 2014
       words: 2758
      flesch: 50
     summary: Bucalem, M.L., Bathe, K.J., 1997, Finite Element Analysis of Shell Structures, Archives of Computational Methods in Engineering, 4(1), pp. 3-61. 4. Javadi, A.A., Tan, T.P., Zhang, M., 2003, Neural network for constitutive modeling in finite element analysis, Computer assisted Mechanics and Engineering Sciences, 10, pp. 523-529. In this paper, we present an efficient method based on neural networks for simulating the real-time behavior of a thin walled structure modeled by the finite element method in the commercial FE software.
    keywords: analysis; element; finite; method; network; shell; structure; time
       cache: fumecheng-309.pdf
  plain text: fumecheng-309.txt

        item: #277 of 526
          id: fumecheng-3170
      author: Rashidi, Nur Syazana; Sukmana, Irza; Mataram, Agung; Jasmawati, Noor; Rofi, Mohd Ramdan Mohd; Kadir, Mohammed Rafiq Abdul
       title: SURFACE-TREATED AND FIBRIN-COATED ELECTROSPUN POLYACRYLONITRILE FIBER FOR ENDOTHELIAL CELL GROWTH AND PROLIFERATION
        date: 2018
       words: 6218
      flesch: 57
     summary: However, the absorbance value for NaOH treated PAN fibers and Na2CO3 treated PAN fibers showed nearly the same absorbance on day 7. To overcome this problem, two groups of electrospun PAN fibers were treated with sodium carbonate (Na2CO3) and sodium hydroxide (NaOH), respectively at 100oC for 5 minutes.
    keywords: cell; electrospun; endothelial; fiber; fibrin; huvecs; na2co3; naoh; pan; pan fiber; polyacrylonitrile; surface; surface treatment; treatment
       cache: fumecheng-3170.pdf
  plain text: fumecheng-3170.txt

        item: #278 of 526
          id: fumecheng-3198
      author: Stanojković, Jelena; Radovanović, Miroslav
       title: INFLUENCE OF THE CUTTING PARAMETERS ON FORCE, MOMENT AND SURFACE ROUGHNESS IN THE END MILLING OF ALUMINUM 6082-T6
        date: 2022
       words: 3127
      flesch: 60
     summary: Surface roughness was measured using a Mahr profilometer. The machined surface quality is evaluated by surface roughness of the machined part and it is one of the most significant product quality characteristics
    keywords: cutting; force; milling; moment; roughness; surface
       cache: fumecheng-3198.pdf
  plain text: fumecheng-3198.txt

        item: #279 of 526
          id: fumecheng-3243
      author: Boshevski, Bojan; Mircheski, Ile
       title: BICYCLE HELMET DESIGN AND THE VIRTUAL VALIDATION OF THE IMPACT, AERODYNAMICS AND PRODUCTION PROCESS
        date: 2017
       words: 4758
      flesch: 51
     summary: The meshed model of bicycle helmet Fig. Expanded polystyrene (EPS) foam is material with a good energy absorption characteristic which is used for bicycle helmet.
    keywords: bicycle helmet; design; fig; head; helmet; impact; process; product; testing
       cache: fumecheng-3243.pdf
  plain text: fumecheng-3243.txt

        item: #280 of 526
          id: fumecheng-3267
      author: Petrović, Nikola; Bojović, Nebojša; Petrović, Marijana; Jovanović, Vesna
       title: A STUDY OF THE ENVIRONMENTAL KUZNETS CURVE FOR TRANSPORT GREENHOUSE GAS EMISSIONS IN THE EUROPEAN UNION
        date: 2020
       words: 5355
      flesch: 49
     summary: Predictors: (Constant), service, GDP per capita c. Dependent Variable: transport GHG emissions Based on the results of the regression analysis given in Table 5 (prepared by the authors - SPSS Statistics 19.0) it can be seen that the coefficient of determination is 0.906 if we consider the impact of GDP per capita as well as the shares of industry and of service in GDP on transport GHG emissions; but if we consider only the impact of GDP per capita and share of service in GDP on transport GHG emission the coefficient of determination is 0.897. Bearing in mind that the industrial development in its early stages contributed to an increased environmental degradation as well as that the literature has not paid much attention so far to the analysis of the quantification of the industrial development effect, along with the service sector development influence on transport GHG emissions, the paper draws particular attention to the influence of the industrial share in the gross domestic product (GDP) and the effects of the service sector in GDP on GHG emissions.
    keywords: analysis; capita; cluster; correlation; countries; gdp; ghg emissions; industry; service; transport ghg
       cache: fumecheng-3267.pdf
  plain text: fumecheng-3267.txt

        item: #281 of 526
          id: fumecheng-3295
      author: Filipović, Mirjana; Kevac, Ljubinko
       title: A NEW WINCH CONSTRUCTION FOR SMOOTH CABLE WINDING/UNWINDING
        date: 2017
       words: 5902
      flesch: 66
     summary: From this moment on, the system for smooth cable winding/unwinding on the winch enters the period when angle i has values defined by: These systems can have completely different applications and also different constructions but their characteristic is that they consist of one or more sub-systems for cable winding/unwinding.
    keywords: angle; cable; cable winding; fig; process; smooth; unwinding; winch; winding
       cache: fumecheng-3295.pdf
  plain text: fumecheng-3295.txt

        item: #282 of 526
          id: fumecheng-3349
      author: Đorđević, Milan; Stefanović, Velimir; Vukić, Mića; Mančić, Marko
       title: EXPERIMENTAL INVESTIGATION OF THE CONVECTIVE HEAT TRANSFER IN A SPIRALLY COILED CORRUGATED TUBE WITH RADIANT HEATING
        date: 2017
       words: 4999
      flesch: 44
     summary: Secondary flows observed in the flow patterns, induced by the centrifugal force, significantly affect the flow field and heat transfer. Their conclusions could not be considered general since the average Nusselt number and pressure drop are not appropriate for evaluation of heat transfer and flow characteristics of the tubes with a constantly varying curvature.
    keywords: coil; flow; heat; heat transfer; number; spiral; temperature; transfer; tube
       cache: fumecheng-3349.pdf
  plain text: fumecheng-3349.txt

        item: #283 of 526
          id: fumecheng-3350
      author: Laković, Mirjana; Pavlović, Ivan; Banjac, Miloš; Jović, Milica; Mančić, Marko
       title: NUMERICAL COMPUTATION AND PREDICTION OF ELECTRICITY CONSUMPTION IN TOBACCO INDUSTRY
        date: 2017
       words: 2946
      flesch: 51
     summary: On the other hand, electricity demand depends on many factors such as temperature, humidity, precipitation, wind speed, cloud cover and amount of light. The total installed power of the electric motor is 1.2 MW. Numerical Computation and Prediction of Electricity Consumption in Tobacco Industry 459 2. PHASES OF FORECAST AND SIMULATION Probabilistic forecasting of electricity demand is an important task for all active market participants.
    keywords: consumption; demand; electricity; energy; forecasting; model; time
       cache: fumecheng-3350.pdf
  plain text: fumecheng-3350.txt

        item: #284 of 526
          id: fumecheng-3351
      author: Bogdanović-Jovanović, Jasmina; Milenković, Dragica; Stamenković, Živojin; Spasić, Živan
       title: DETERMINATION OF AVERAGED AXISYMMETRIC FLOW SURFACES AND MERIDIAN STREAMLINES IN THE CENTRIFUGAL PUMP USING NUMERICAL SIMULATION RESULTS
        date: 2017
       words: 6284
      flesch: 66
     summary:  , (3a) where, 1 1Δ ( ) ( ) ( )mr r r     , 2 Δ ( ) ( ) ( )n mr r r     [deg]. The application of the trapezoidal rule for Eq. (4) yields: 1 2 1 2 1 1 1 1 2 1 1 1 ( , ) ( )( ) ( )( ) 2Δ ( ) 2Δ ( ) m n j j j j j j j j j j m f q q f f f f r r                                , (4) Determination of Averaged Axisymmetric Flow Surfaces and Meridian Streamlines in the Centrifugal… 483 where: 1 1Δ ( ) ( ) ( )mr r r     , 2 Δ ( ) ( ) ( )n mr r r     ,  [deg], fj=fj(r), j=1,2,...m1,m2,...,n. Δ grad Δ Δ Δ Δ 1 1 1 div div(Δ , ) Δ , =div Δ , Δ Δ Δ 1 1 1 rot rot(Δ , ) Δ , rot Δ Δ Δ Δ n n f q f f f f
    keywords: flow; impeller; j j; l q; pump; q r; δ δ
       cache: fumecheng-3351.pdf
  plain text: fumecheng-3351.txt

        item: #285 of 526
          id: fumecheng-3361
      author: Shatrov, Mikhail G.; Sinyavski, Vladimir V.; Dunin, Andrey Yu.; Shishlov, Ivan G.; Vakulenko, Andrey V.
       title: METHOD OF CONVERSION OF HIGH- AND MIDDLE-SPEED DIESEL ENGINES INTO GAS DIESEL ENGINES
        date: 2017
       words: 5044
      flesch: 54
     summary: Less fuel efficiency compared with gas diesel engines is compensated by a NOx much lower price of gas when stationary engines are connected directly to gas pipelines. In gas diesel engines using a traditional (mechanical) gas fuel feed system, substitution of diesel fuel by gas is comparatively low because the share of diesel fuel is 20-30% at full loads, it grows with decrease of load and becomes 100% at idle speed [8].
    keywords: control; diesel; diesel engine; diesel fuel; engine; fuel; gas; gas diesel; pressure; speed; supply; system
       cache: fumecheng-3361.pdf
  plain text: fumecheng-3361.txt

        item: #286 of 526
          id: fumecheng-3368
      author: Živković, Predrag; Tomić, Mladen; Dimitrijević, Dragana; Kecman, Ivana; Dobrnjac, Mirko
       title: INFLUENCE OF THE CHANGING LOCAL CLIMATE ON WIND POTENTIALS OF MOUNT KOPAONIK
        date: 2017
       words: 3773
      flesch: 62
     summary: In that sense, wind energy clearly takes a prominent place considering its large potentials, purity and availability. Renewable energy, including wind energy, is not an exception.
    keywords: analysis; data; energy; kopaonik; model; potentials; serbia; wind
       cache: fumecheng-3368.pdf
  plain text: fumecheng-3368.txt

        item: #287 of 526
          id: fumecheng-3393
      author: Ongar, Bulbul; Iliev, Iliya K.; Nikolić, Vlastimir; Milašinović, Aleksandar
       title: THE STUDY AND THE MECHANISM OF NITROGEN OXIDES’ FORMATION IN COMBUSTION OF FOSSIL FUELS
        date: 2018
       words: 4980
      flesch: 51
     summary: The maximum quantity of fuel nitrogen oxides is formed at excess air ratio α = 0.850.9. The fuel nitrogen which remained in coke at the secondary combustion is also partially converted to oxidized nitrogen, but its share in comparison with the emissions of nitrogen fuel oxides from the gas phase is insignificant.
    keywords: air; burning; coal; combustion; concentration; formation; fuel; furnace; level; nitrogen; nitrogen oxides; nox; oxides
       cache: fumecheng-3393.pdf
  plain text: fumecheng-3393.txt

        item: #288 of 526
          id: fumecheng-3416
      author: Willert, Emanuel
       title: DUGDALE-MAUGIS ADHESIVE NORMAL CONTACT OF AXISYMMETRIC POWER-LAW GRADED ELASTIC BODIES
        date: 2018
       words: 4002
      flesch: 69
     summary:                                                      2 11 2 1 1 3 1 F , ; ; , 2 2k k
    keywords: contact; k k
       cache: fumecheng-3416.pdf
  plain text: fumecheng-3416.txt

        item: #289 of 526
          id: fumecheng-3464
      author: Bardenhagen, Andreas; Rakov, Dmitry
       title: ADVANCED MORPHOLOGICAL APPROACH IN AEROSPACE DESIGN DURING CONCEPTUAL STAGE
        date: 2019
       words: 3317
      flesch: 45
     summary: Table 2 Morphological matrix with possible 4S system variants attribute (descriptors) Milčić, D., Miltenović, V., 1999, Application of artificial intelligence methods in gear transmitters conceptual design, Facta Universitatis-Series Mechanical Engineering, 1(6), pp.721-734. 3. Polovinkin, A., 1991, Design theory of new engineering solutions: technology patterns and their applications.
    keywords: analysis; approach; design; engineering; fig; rakov; solutions; synthesis; systems; uas; variants
       cache: fumecheng-3464.pdf
  plain text: fumecheng-3464.txt

        item: #290 of 526
          id: fumecheng-3473
      author: Spasić, Živan; Jovanović, Miloš; Bogdanović-Jovanović, Jasmina; Milanović, Saša
       title: NUMERICAL INVESTIGATION OF THE INFLUENCE OF THE DOUBLY CURVED BLADE PROFILES ON THE REVERSIBLE AXIAL FAN CHARACTERISTICS
        date: 2020
       words: 4844
      flesch: 66
     summary: In a cascade with straight profiles the leading and trailing angle of blade profile (1l = 2l) equals the angle of inclination profile t in the cascade profile (Fig. If one observes a cascade with profiles that have a doubly curved mean line, the leading and trailing angles of blade profile (1l =2l) are greater or smaller than the angle of inclination of profile cascade t, for the angle of end curvature of profile mean line l (Fig. 4): 1 2l l t l      (2) Fig.
    keywords: blades; curvature; fan; fig; flow; profile; 1l; 2l
       cache: fumecheng-3473.pdf
  plain text: fumecheng-3473.txt

        item: #291 of 526
          id: fumecheng-3502
      author: Dimaki, Andrey; Shilko, Evgeny; Psakhie, Sergey; Popov, Valentin
       title: SIMULATION OF FRACTURE USING A MESH-DEPENDENT FRACTURE CRITERION IN THE DISCRETE ELEMENT METHOD
        date: 2018
       words: 4155
      flesch: 58
     summary: Based on the obtained results, we suggest a mesh-dependent local fracture criterion which allows us to overcome the mentioned problem, namely to avoid dependence of the contact strength on element size. Schematic of the simulated sample; element size d=0.001 m The elastic modulus of the half-space was Ehalf-space = 200 GPa, the elastic modulus of the punch Epunch was varied in a certain range in order to perform a parametric study of the problem.
    keywords: contact; criterion; element; fracture; punch; size; space; strength; stress; tensile
       cache: fumecheng-3502.pdf
  plain text: fumecheng-3502.txt

        item: #292 of 526
          id: fumecheng-3503
      author: Stojković, Miloš; Trifunović, Milan; Milovanović, Jelena; Arsić, Stojanka
       title: USER DEFINED GEOMETRIC FEATURE FOR THE CREATION OF THE FEMORAL NECK ENVELOPING SURFACE
        date: 2022
       words: 5937
      flesch: 45
     summary: 5) ▪ Angle between FNA and femur body(Fig. 5) ▪ Femoral neck curve – FNC(Fig. 5) Creation of FNC starts with construction of FNA. Collecting the raw material (CT scans) for analysis of femoral neck geometry 2.
    keywords: bone; cross; femur; fig; geometry; model; neck; reconstruction; sections; surface; udf
       cache: fumecheng-3503.pdf
  plain text: fumecheng-3503.txt

        item: #293 of 526
          id: fumecheng-3539
      author: Li, Qiang; Popov, Valentin L.
       title: ADHESIVE FORCE OF FLAT INDENTERS WITH BRUSH-STRUCTURE
        date: 2018
       words: 2762
      flesch: 64
     summary: We have numerically studied adhesive contact between a flat indenter with brush structure and an elastic half space using the boundary element method. Three-dimensional numerical methods, in particular the boundary element method have been recently very frequently used to simulate the pull-off process of adhesive contact of different indenters, for example based on the JKR-model (Johnson, Kendall and Roberts) by Pohrt and Popov (2015)
    keywords: area; contact; fig; force; pillars
       cache: fumecheng-3539.pdf
  plain text: fumecheng-3539.txt

        item: #294 of 526
          id: fumecheng-3540
      author: Pakhaliuk, Vladimir; Poliakov, Aleksandr
       title: SIMULATION OF WEAR IN A SPHERICAL JOINT WITH A POLYMERIC COMPONENT OF THE TOTAL HIP REPLACEMENT CONSIDERING ACTIVITIES OF DAILY LIVING
        date: 2018
       words: 5443
      flesch: 55
     summary: And, finally, the least contribution to total wear (about 17%) pay in level walking, despite the longest duration of the action (44% of the total cycle time). 14 Graphs of linear wear during summarized ADL and for each the ADL contributed In Figs.
    keywords: activities; adl; chair; fig; force; hip; joint; simulation; vector; wear
       cache: fumecheng-3540.pdf
  plain text: fumecheng-3540.txt

        item: #295 of 526
          id: fumecheng-3547
      author: Popov, Valentin L.
       title: ADHESIVE WEAR: GENERALIZED RABINOWICZ’ CRITERIA
        date: 2018
       words: 4258
      flesch: 62
     summary: By probing various positions and diameters, one can identify the material regions which can potentially produce wear particles. The work of Aghababaei, Warner and Molinari improves our understanding of adhesive wear but at the same time puts many new questions.
    keywords: c c; contact; criterion; rabinowicz; wear
       cache: fumecheng-3547.pdf
  plain text: fumecheng-3547.txt

        item: #296 of 526
          id: fumecheng-3555
      author: Ciavarella, Michele; Papangelo, Antonio
       title: THE “SPORT” OF ROUGH CONTACTS AND THE FRACTAL PARADOX IN WEAR LAWS
        date: 2018
       words: 5631
      flesch: 55
     summary: However, this is disappointing as friction has been studied since the times of Leonardo and in 500 years, no predictive model has emerged, nor any significant improvement from rough contact models. It is more likely to be another of the possible paradoxical results of applying multiscale contact models to Archard and Rabinowicz’s ideas.
    keywords: archard; area; coefficient; contact; fractal; law; load; model; scale; wear
       cache: fumecheng-3555.pdf
  plain text: fumecheng-3555.txt

        item: #297 of 526
          id: fumecheng-3574
      author: Ghazanfari, Seyed Alireza; Abdul Wahid, Malan
       title: HEAT TRANSFER ENHANCEMENT AND PRESSURE DROP FOR FIN-AND-TUBE COMPACT HEAT EXCHANGERS WITH DELTA WINGLET-TYPE VORTEX GENERATORS
        date: 2018
       words: 5253
      flesch: 64
     summary: Hwang, S.W., Kim, D.H., Min, J.K., Jeong, J.H., 2012, CFD analysis of fin tube heat exchanger with a pair of delta winglet vortex generators, Journal of Mechanical Science and Technology, 26(9), pp. Despite different types of heat exchangers, fin-and-tube compact heat exchangers are still common device in different industries due to the diversity of usage and the low space installation need.
    keywords: exchangers; factor; fin; heat; heat transfer; transfer; tube; vgs; vortex; winglet
       cache: fumecheng-3574.pdf
  plain text: fumecheng-3574.txt

        item: #298 of 526
          id: fumecheng-3578
      author: Balokhonov, Ruslan; Romanova, Varvara; Batukhtina, Ekaterina; Sergeev, Maxim; Emelianova, Evgeniya
       title: A NUMERICAL STUDY OF THE MICROSCALE PLASTIC STRAIN LOCALIZATION IN FRICTION STIR WELD ZONES
        date: 2018
       words: 4462
      flesch: 48
     summary: Stress and strain fields in equiaxed grain structure For a polycrystal composed of equiaxed grains (Fig. 2a), three sets of calculations were performed where the grain orientations were distributed at random or scattered about certain crystallographic direction within 5 and 22º to simulate a strong or weak {100}<100> cubic texture, respectively. In this paper, the deformation behavior of model grain structures was calculated using the finite element software package ABAQUS/Explicit.
    keywords: deformation; friction; grain; localization; microstructure; plastic; stir; strain; stress; texture
       cache: fumecheng-3578.pdf
  plain text: fumecheng-3578.txt

        item: #299 of 526
          id: fumecheng-3588
      author: Papangelo, Antonio
       title: ADHESION BETWEEN A POWER-LAW INDENTER AND A THIN LAYER COATED ON A RIGID SUBSTRATE
        date: 2018
       words: 3931
      flesch: 59
     summary: In the present paper we investigate indentation of a power-law axisymmetric rigid probe in adhesive contact with a thin layer laying on a rigid foundation for both frictionless unbounded and bounded compressible cases. [22] has been proposed [26], which, in boundary element simulations, introduces a mesh dependent criterion (based on the balance between elastic energy release and adhesion work) to numerically solve adhesive contacts of complex shapes, which in principle can be easily generalized to the case of layered systems.
    keywords: adhesion; adhesive; case; contact; k k; layer; pull
       cache: fumecheng-3588.pdf
  plain text: fumecheng-3588.txt

        item: #300 of 526
          id: fumecheng-3593
      author: Ciavarella, Michele
       title: FRACTURE MECHANICS SIMPLE CALCULATIONS TO EXPLAIN SMALL REDUCTION OF THE REAL CONTACT AREA UNDER SHEAR
        date: 2018
       words: 2307
      flesch: 64
     summary: Recently, in a very interesting paper, Sahli et al.[12] make spectacular experiments on the reduction of contact area In a very recent paper, Sahli and coauthors [12] (R. Sahli et al., 2018, “Evolution of real contact area under shear”, PNAS, 115(3), pp.
    keywords: adhesion; area; contact; mechanics
       cache: fumecheng-3593.pdf
  plain text: fumecheng-3593.txt

        item: #301 of 526
          id: fumecheng-3600
      author: Popov, Valentin L.
       title: SOLUTION OF ADHESIVE CONTACT PROBLEM ON THE BASIS OF THE KNOWN SOLUTION FOR NON-ADHESIVE ONE
        date: 2018
       words: 2612
      flesch: 69
     summary: It was communicated privately to colleagues and published for a restricted set of adhesive contact problems in [1]. (6) Solution of adhesive contact problem on the basis of the non-adhesive solution 95
    keywords: contact
       cache: fumecheng-3600.pdf
  plain text: fumecheng-3600.txt

        item: #302 of 526
          id: fumecheng-3619
      author: Psakhie, Sergey G.
       title: FOREWORD
        date: 2018
       words: 885
      flesch: 48
     summary: [1] and in the context of much debated influence of the “contact splitting” on the strength of adhesive contacts,  Adhesive contact of gradient media with finite range adhesive forces (E. Willert). This topic is interesting both regarding numerical simulations of adhesive contacts with the Boundary Element Method
    keywords: contact; wear
       cache: fumecheng-3619.pdf
  plain text: fumecheng-3619.txt

        item: #303 of 526
          id: fumecheng-3683
      author: Crnomarković, Nenad; Belošević, Srđan; Nemoda, Stevan; Tomanović, Ivan; Milićević, Aleksandar
       title: DETERMINATION OF THE WALL VARIABLES WITHIN THE ZONAL MODEL OF RADIATION INSIDE A PULVERIZED COAL-FIRED FURNACE
        date: 2018
       words: 5573
      flesch: 54
     summary: The model is based on division of furnace space into volume zones and furnace walls into surface zones [7]. Papers which describe determination of wall variables by numerical simulations when radiative heat exchange is solved by the zonal model are very rare.
    keywords: ams; differences; furnace; heat; method; model; numerical; variables; wall; wall variables
       cache: fumecheng-3683.pdf
  plain text: fumecheng-3683.txt

        item: #304 of 526
          id: fumecheng-3689
      author: Aboulissane, Badreddine; El Bakkali, Larbi; El Bahaoui, Jalal
       title: WORKSPACE ANALYSIS AND OPTIMIZATION OF THE PARALLEL ROBOTS BASED ON COMPUTER-AIDED DESIGN APPROACH
        date: 2020
       words: 3988
      flesch: 54
     summary: However, the problem of workspace optimization of the parallel manipulators to obtain a prescribed workspace has been investigated in few articles. The computation and analysis of workspaces will be carried out using the parameterization and three- dimensional representation of the workspace.
    keywords: delta; design; optimization; parallel; robot; workspace
       cache: fumecheng-3689.pdf
  plain text: fumecheng-3689.txt

        item: #305 of 526
          id: fumecheng-3758
      author: Poliakov, Aleksandr; Pakhaliuk, Vladimir
       title: FAST USER ACTIVITY PHASE RECOGNITION FOR THE SAFETY OF TRANSFEMORAL PROSTHESIS CONTROL
        date: 2020
       words: 7170
      flesch: 54
     summary: 8 Images of user activity phases: a) 71; b) cs; c) 63 Fast User Activity Phase Recognition for the Safety of Transfemoral Prosthesis Control 149 4. The results of the tests showed that the proposed method is not inferior to neural network and neural fuzzy methods in efficiency, but it requires significantly less computer time to solve the problems of phase activity recognition.
    keywords: activity; activity phase; parameters; phase; point; recognition; space; state; tfp; user;  
       cache: fumecheng-3758.pdf
  plain text: fumecheng-3758.txt

        item: #306 of 526
          id: fumecheng-3768
      author: Ciavarella, Michele; Carbone, Giuseppe; Vinogradov, Vladimir
       title: A CRITICAL ASSESSMENT OF KASSAPOGLOU'S STATISTICAL MODEL FOR COMPOSITES FATIGUE
        date: 2018
       words: 6056
      flesch: 52
     summary: Kassapoglou, C., 2011, fatigue model for composites based on the cycle-by-cycle probability of failure: implications and applications, J of Composite Materials, 45, pp. A Critical Assessment on Kassapoglou's Statistical Model for Composites Fatigue 117 The tendency to exponential distribution of fatigue lives is not very strong in general anyway, since in many large databases a full distribution of Weibull shape parameters is found [8, 18].
    keywords: cycle; distribution; failure; fatigue; kassapoglou; model; probability; static; strength
       cache: fumecheng-3768.pdf
  plain text: fumecheng-3768.txt

        item: #307 of 526
          id: fumecheng-3791
      author: Popov, Valentin L.; Willert, Emanuel; Heß, Markus
       title: METHOD OF DIMENSIONALITY REDUCTION IN CONTACT MECHANICS AND FRICTION: A USER’S HANDBOOK. III. VISCOELASTIC CONTACTS
        date: 2018
       words: 5469
      flesch: 62
     summary: 4 t NF x t w x t J t t t x t        (19) Accounting for compressibility in viscoelastic contact problems is, in general, a rather non-trivial task
    keywords: contact; g g; g t; t t; viscoelastic
       cache: fumecheng-3791.pdf
  plain text: fumecheng-3791.txt

        item: #308 of 526
          id: fumecheng-3813
      author: Kassai, Miklos; Poleczky, Laszlo; Al-Hyari, Laith; Kajtar, Laszlo; Nyers, Jozsef
       title: INVESTIGATION OF THE ENERGY RECOVERY POTENTIALS IN VENTILATION SYSTEMS IN DIFFERENT CLIMATES
        date: 2018
       words: 5067
      flesch: 47
     summary: Consequently, in addition to an average energetic characterization, it is possible to determine the expectable minimum and maximum operating conditions, the range of heat recovery values as well. As the novelty of this research with the developed procedure drawn up in this study, the energetic possibilities of heat recovery under various climate and operating conditions may be examined in more detail and more realistically than with the methods and available information of current engineering practices.
    keywords: air; average; data; energy; enthalpy; exhaust; fig; heat; recovery; time; total
       cache: fumecheng-3813.pdf
  plain text: fumecheng-3813.txt

        item: #309 of 526
          id: fumecheng-3828
      author: Janošević, Dragoslav; Pavlović, Jovan; Jovanović, Vesna; Petrović, Goran
       title: A NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE DYNAMIC STABILITY OF HYDRAULIC EXCAVATORS
        date: 2018
       words: 4491
      flesch: 36
     summary: The paper presents the results of a numerical and experimental analysis of the dynamic stability of hydraulic excavators. Previous research in the area has been related to the development of mathematical models for the analysis of the static stability of hydraulic excavators
    keywords: analysis; drive; excavator; fig; hydraulic; member; movement; support; system
       cache: fumecheng-3828.pdf
  plain text: fumecheng-3828.txt

        item: #310 of 526
          id: fumecheng-3910
      author: Mitrev, Rosen; Tudjarov, Boris; Todorov, Todor
       title: CLOUD-BASED EXPERT SYSTEM FOR SYNTHESIS AND EVOLUTIONARY OPTIMIZATION OF PLANAR LINKAGES
        date: 2018
       words: 6531
      flesch: 56
     summary: When we use Eq. (16), we have in mind that 1 1 1 2 2 2 1 1 1 2 2 2 cos cos sin sin L L L L                J (17) The Jacobian for the considered RRR dyad has the following form: 144 R. MITREV, B. TUDJAROV, T.TODOROV 1 1 2 2 1 1 2 2 sin sin cos cos L L L L             J (11)
    keywords: l l; system;  ;  ;  ;  
       cache: fumecheng-3910.pdf
  plain text: fumecheng-3910.txt

        item: #311 of 526
          id: fumecheng-3919
      author: Nyers, Arpad; Pek, Zoltan; Nyers, Jozsef
       title: DYNAMICAL BEHAVIOR OF A HEAT PUMP COAXIAL EVAPORATOR CONSIDERING THE PHASE BORDER’S IMPACT ON CONVERGENCE
        date: 2018
       words: 4055
      flesch: 54
     summary: Rasmussen and Alleyne [5] developed an air to air heat pump system using a moving boundary-lumped parameter approach to the heat exchangers. Received April 24, 2018 / Accepted June 10, 2018 Corresponding author: Jozsef Nyers Obuda University, Doctoral School of Applied Informatics and Applied Mathematics, Budapest, Hungary E-mail: jnyers1@gmail.com 250 A. NYERS, Z. PEK, J. NYERS Several dynamic models of heat pumps have been developed but few of them dealt with the heat pump’s coaxial evaporator.
    keywords: evaporator; heat; phase; pump; refrigerant; time; water
       cache: fumecheng-3919.pdf
  plain text: fumecheng-3919.txt

        item: #312 of 526
          id: fumecheng-4014
      author: Pamučar, Dragan; Božanić, Darko; Lukovac, Vesko; Komazec, Nenad
       title: NORMALIZED WEIGHTED GEOMETRIC BONFERRONI MEAN OPERATOR OF INTERVAL ROUGH NUMBERS – APPLICATION IN INTERVAL ROUGH DEMATEL-COPRAS MODEL
        date: 2018
       words: 10934
      flesch: 80
     summary: i i IRN IRN IRN                          ' ' ' '( ) ( ) , , ,L L U U L L U U
    keywords: irn; j j;  ;  
       cache: fumecheng-4014.pdf
  plain text: fumecheng-4014.txt

        item: #313 of 526
          id: fumecheng-4103
      author: Benad, Justus
       title: FAST NUMERICAL IMPLEMENTATION OF THE MDR TRANSFORMATIONS
        date: 2018
       words: 4723
      flesch: 60
     summary: For the tested examples, the proposed method gives more accurate results with the same number of discretization points than other tested numerical techniques. The maximum error of gk, wn, and pn with respect to the analytical solutions for g, w, and p decreases when the number of discretization points N is increased as can be seen in Fig.
    keywords: method; numerical; transformations
       cache: fumecheng-4103.pdf
  plain text: fumecheng-4103.txt

        item: #314 of 526
          id: fumecheng-4112
      author: Nikolić, Vlastimir; Milovančević, Miloš; Petković, Dalibor; Jocić, Dejan; Savić, Milan
       title: PARAMETERS FORECASTING OF LASER WELDING BY THE ARTIFICIAL INTELLIGENCE TECHNIQUES
        date: 2018
       words: 2796
      flesch: 59
     summary: Zhao, Y., Zhu, K., Ma, Q., Shang, Q., Huang, J., Yang, D., 2016, Plasma behavior and control with small diameter assisting gas nozzle during CO2 laser welding, Journal of Materials Processing Technology, 237, pp. Chen, L., Zhou, L., Tang, C., Huang, W., Wang, C., Hu, X., Wang, J., Yan, F., Wang, X., Jiang, Z., Shao, X., 2014, Study of laser butt welding of SUS301L stainless steel and welding joint analysis, The International Journal of Advanced Manufacturing Technology, 73(9-12), pp. 1695-1704. 8.
    keywords: elm; forecasting; input; laser; parameters; process; welding
       cache: fumecheng-4112.pdf
  plain text: fumecheng-4112.txt

        item: #315 of 526
          id: fumecheng-4342
      author: Grujović, Nenad; Živić, Fatima; Schnabelrauch, Matthias; Walter, Torsten; Wyrwa, Ralf; Palić, Nikola; Ocokoljić, Lazar
       title: CUSTOMIZATION OF ELECTROSPINNING FOR TISSUE ENGINEERING
        date: 2018
       words: 6757
      flesch: 46
     summary: Special design of the element used in electrospinning device (a multi-jet electrospinning head) which introduces two different polymers into the electric field is shown in Fig. Development of different electrospinning techniques (melt- and solution- electrospinning, force-spinning, melt-blowing, flash-spinning, spinning of bicomponent fibers) has become a hot topic due to versatile applications of micro- and nanofibers (tissue engineering, sensors, clothing, membranes for filtration systems, fillers in composite structures, coatings, etc.)
    keywords: collector; device; electrospinning; electrospun; engineering; fibers; head; material; melt; needle; polymer; solution; tissue
       cache: fumecheng-4342.pdf
  plain text: fumecheng-4342.txt

        item: #316 of 526
          id: fumecheng-4346
      author: Bhui, Amandeep Singh; Singh, Gurpreet; Sidhu, Sarabjeet Singh; Bains, Preetkanwal Singh
       title: EXPERIMENTAL INVESTIGATION OF OPTIMAL ED MACHINING PARAMETERS FOR Ti-6Al-4V BIOMATERIAL
        date: 2018
       words: 3412
      flesch: 52
     summary: From the results, it is found that the discharge current has significant influence on material removal rate (MRR) and surface roughness (SR) followed by other selected parameters, i.e. pulse-on time, pulse-off time. Furthermore, with increase in pulse time, the electrode wear decreased drastically, whereas surface roughness was greater at higher pulse-on time and higher current intensity.
    keywords: alloy; current; edm; machining; parameters; pulse; surface; ti-6al-4v; time
       cache: fumecheng-4346.pdf
  plain text: fumecheng-4346.txt

        item: #317 of 526
          id: fumecheng-438
      author: Patel, Jimit R; Deheri, Gunamani
       title: EFFECT OF VARIOUS POROUS STRUCTURES ON THE SHLIOMIS MODEL BASED FERROFLUID LUBRICATION OF THE FILM SQUEEZED BETWEEN ROTATING ROUGH CURVED CIRCULAR PLATES
        date: 2014
       words: 5418
      flesch: 61
     summary: A review of the performance of porous squeeze films between lubricated plates is presented by Wu Wu, Hai, 1978, A review of porous squeeze films, Wear, 47(2), pp. 371-385. 13.
    keywords: capacity; deheri; effect; fig; film; load; model; respect; squeeze
       cache: fumecheng-438.pdf
  plain text: fumecheng-438.txt

        item: #318 of 526
          id: fumecheng-4407
      author: Benad, Justus
       title: EFFICIENT CALCULATION OF THE BEM INTEGRALS ON ARBITRARY SHAPES WITH THE FFT
        date: 2018
       words: 4484
      flesch: 63
     summary: 2 ( , ) S x S y S c x y u x y r x x y y q x y dS x x u x y n x y dS r x x y y y y u x y n x y dS r x x y y                   (12) (Note that in Eq. With 2 2 0 0( ) ( )r x x y y    , (8) the fundamental solution (3) can be written as * 0 0 1 ( , ) ln( ) 2 u x x y y r      .
    keywords: boundary; fft; fig; grid;  
       cache: fumecheng-4407.pdf
  plain text: fumecheng-4407.txt

        item: #319 of 526
          id: fumecheng-449
      author: Stojanović, Vladimir; Ribeiro, Pedro
       title: MODES OF VIBRATION OF THE BEAMS UNDER THE INFLUENCE OF DISCONTINUITY IN FOUNDATION
        date: 2014
       words: 5711
      flesch: 68
     summary: d 2 2 c c l L b l L hbl hbl        M N N N N w w w w , (23) 2 1 1 1T 2 2T 21 d [3] have developed a boundary element method (BEM) for the geometrically nonlinear response of shear deformable beams traversed by moving loads, resting on tensionless nonlinear three-parameter viscoelastic foundation; they have shown that the BEM may be advantageous for exploring nonlinear effects on this kind of problems.
    keywords: beam; d d; discontinuity; foundation; l l; t t; w w;  
       cache: fumecheng-449.pdf
  plain text: fumecheng-449.txt

        item: #320 of 526
          id: fumecheng-456
      author: Zdravković, Milan; Trajanović, Miroslav; Pavlović, Dragan
       title: ONTOLOGICAL FRAMEWORK FOR KNOWLEDGE MANAGEMENT IN ORTHOPEDIC SURGERY
        date: 2015
       words: 5221
      flesch: 42
     summary: There exist plenty of anatomical ontologies, clinical ontologies or ontologies of other domains in medicine. Medical ontologies and electronic health records
    keywords: data; domain; fracture; framework; information; knowledge; management; medical; ontologies; ontology; systems
       cache: fumecheng-456.pdf
  plain text: fumecheng-456.txt

        item: #321 of 526
          id: fumecheng-4622
      author: Nunić, Zdravko B.; Ajanović, Mesud; Miletić, Dario; Lojić, Ranko
       title: DETERMINATION OF THE ROLLING RESISTANCE COEFFICIENT UNDER DIFFERENT TRAFFIC CONDITIONS
        date: 2020
       words: 5368
      flesch: 58
     summary: Motor vehicle tires, as a system of vital importance, deserve special attention 664 Z. NUNIĆ, M. AJANOVIĆ, D. MILETIĆ, R. LOJIĆ when checking the technical validity of a motor vehicle in order to increase the safety of road traffic and reduce rolling resistance, total resistance and thus reduce fuel consumption. Reducing rolling resistance affects an increase in energy efficiency of road traffic, which reduces carbon dioxide emission and helps drivers reduce fuel costs.
    keywords: coefficient; conditions; fuel; research; resistance; resistance coefficient; rolling; speed; tires; traffic; vehicle
       cache: fumecheng-4622.pdf
  plain text: fumecheng-4622.txt

        item: #322 of 526
          id: fumecheng-4625
      author: Tsirogiannis, Evangelos; Vosniakos, George-Christopher
       title: REDESIGN AND TOPOLOGY OPTIMIZATION OF AN INDUSTRIAL ROBOT LINK FOR ADDITIVE MANUFACTURING
        date: 2019
       words: 4074
      flesch: 51
     summary: Design optimization for Additive Manufacturing is demonstrated by the example of an industrial robot link. Wang S.Y., Tai K., 2005, Structural topology design optimization using genetic algorithms with a bit- array representation, Comput Methods Appl Mech Eng, 194, pp.
    keywords: design; fig; forearm; link; manufacturing; mass; optimization; robot; section; sls; topology
       cache: fumecheng-4625.pdf
  plain text: fumecheng-4625.txt

        item: #323 of 526
          id: fumecheng-4686
      author: Trajanović, Miroslav; Canciglieri Junior, Osiris
       title: FOREWORD
        date: 2018
       words: 668
      flesch: 38
     summary: Of those that are close to mechanical engineering it is worth mentioning reverse engineering, additive technologies, nano materials, biomaterials, finite element method, artificial intelligence, robotics and especially nano-robotics. Yet this is not so difficult to guess knowing that an increasing amount of research is currently being done in biomedical engineering.
    keywords: engineering; population
       cache: fumecheng-4686.pdf
  plain text: fumecheng-4686.txt

        item: #324 of 526
          id: fumecheng-4727
      author: Fragassa, Cristiano; Minak, Giangiacomo; Pavlovic, Ana
       title: MEASURING DEFORMATIONS IN THE TELESCOPIC BOOM UNDER STATIC AND DYNAMIC LOAD CONDITIONS
        date: 2020
       words: 5411
      flesch: 52
     summary: 6 Measures for nominal load (75 bar): (a) entire spectrum and (b) loading phase only Comparing measures with expectations:  strain gauges 1-3 and 2-4 have different readings showing that the part of the expected symmetry is missing in the real structure or loads (or both);  strain gauges 5 and 6 actually detect similar values with opposite sign, as well as 11 and 12: De Saint Venant's theory is applicable in those areas;  strain gauge 6, as expected, detects the maximum deformation;  strain gauges 13 and 14 correctly detect lower values (-13%) than strain gauge 6;  Placement of strain gauges Taking into account the results of the previous simulations
    keywords: boom; fig; gauges; load; pads; sliding; strain; strain gauges; telescopic
       cache: fumecheng-4727.pdf
  plain text: fumecheng-4727.txt

        item: #325 of 526
          id: fumecheng-4728
      author: Saravanakumar, Kannivel; Sai Lakshminarayanan, Balakrishnan; Arumugam, Vellayaraj; Santulli, Carlo; Pavlovic, Ana; Fragassa, Cristiano
       title: QUASI-STATIC INDENTATION BEHAVIOR OF GFRP WITH MILLED GLASS FIBER FILLER MONITORED BY ACOUSTIC EMISSION
        date: 2019
       words: 7818
      flesch: 48
     summary: It is noticed that the damage induced in low-velocity impact can be effectively simulated in quasi-static indentation tests regarding their advantage in providing longer times, hence enabling damage evolution monitoring [7, 8]. The parameters, such as peak load or ultimate load, incident energy, absorbed energy, elastic energy and residual depth, were determined in order to quantify the local damage in the composite materials during quasi-static indentation tests [12, 13].
    keywords: baseline; baseline samples; damage; delamination; depth; fiber; filler; glass; indentation; indentation depth; load; samples
       cache: fumecheng-4728.pdf
  plain text: fumecheng-4728.txt

        item: #326 of 526
          id: fumecheng-4773
      author: Willert, Emanuel
       title: ENERGY LOSS AND WEAR IN SPHERICAL OBLIQUE ELASTIC IMPACTS
        date: 2019
       words: 3949
      flesch: 58
     summary: Key Words: Elastic Impacts, Friction, Energy Dissipation, Wear 1. INTRODUCTION Impact wear, i.e. material degradation due to the repetitive impacting of solid particles onto a surface is a serious source of damage and failure in several technical systems like steam generator tubes [1], mining machinery The wear loss in impact wear has been reported in the literature to be proportional to the amount of energy dissipated during the impact [1].
    keywords: contact; energy; impact; wear
       cache: fumecheng-4773.pdf
  plain text: fumecheng-4773.txt

        item: #327 of 526
          id: fumecheng-4780
      author: Pohrt, Roman
       title: TIRE WEAR PARTICLE HOT SPOTS – REVIEW OF INFLUENCING FACTORS
        date: 2019
       words: 5263
      flesch: 67
     summary: Some studies also report a negative correlation between mean trip speed and tire wear rate, meaning that slower driving cars experience more tire wear than faster driving cars [6, 38, 39]. Park, I., Kim, H., Lee, S., 2018, Characteristics of tire wear particles generated in a laboratory simulation of tire/road contact conditions, Journal of Aerosol Science, 124, pp.
    keywords: environment; factors; force; particles; passenger; rate; report; road; tire; tire wear; vehicle; wear
       cache: fumecheng-4780.pdf
  plain text: fumecheng-4780.txt

        item: #328 of 526
          id: fumecheng-4792
      author: Benad, Justus
       title: NUMERICAL METHODS FOR THE SIMULATION OF DEFORMATIONS AND STRESSES IN TURBINE BLADE FIR-TREE CONNECTIONS
        date: 2019
       words: 6200
      flesch: 64
     summary: The MDR is an efficient tool for calculating surface deformations and stresses of elastic or viscoelastic bodies which are brought into contact. As the disk profile is modeled as an elastic half-space it can be regarded as even for the determination of the dependencies of surface deformations and forces.
    keywords: contact; deformations; fig; fir; method; space; tree; turbine;  
       cache: fumecheng-4792.pdf
  plain text: fumecheng-4792.txt

        item: #329 of 526
          id: fumecheng-4822
      author: Wang, Bin; Chang, Qiu Ying; Gao, Kai
       title: SYNERGISTIC TRIBOLOGICAL PROPERTIES OF SYNTHETIC MAGNESIUM SILICATE HYDROXIDE COMBINED WITH AMPHIPHILIC MOLECULES
        date: 2019
       words: 4104
      flesch: 54
     summary: Gulzar, M., Masjuki, H.H., Kalam, M.A., Varman, M., Zulkifli, N.W.M., Mufti, R.A., et al, 2016, Tribological performance of nanoparticles as lubricating oil additives, J Nanoparticle Res, 18, pp. Meanwhile, a dark tribofilm formed on the substrate surface when the experimental load increased to 600N. In Fig. 6, the EDS analyses of friction surfaces lubricated by oil+ MSH+ AMs show that the smooth worn surfaces under test condition of 200N mainly consist of Fe which agrees with EDS result of original substrate (Table 2).
    keywords: ams; fig; friction; msh; nanoparticles; oil; properties; surfaces; synthetic; wear
       cache: fumecheng-4822.pdf
  plain text: fumecheng-4822.txt

        item: #330 of 526
          id: fumecheng-4828
      author: Popov, Valentin
       title: GENERALIZED ARCHARD LAW OF WEAR BASED ON RABINOWICZ CRITERION OF WEAR PARTICLE FORMATION
        date: 2019
       words: 3217
      flesch: 57
     summary: Key words: Adhesive wear, Archard, Rabinowicz, Particle formation, Roughness 1. INTRODUCTION In 1953, Archard published an article with the modest title “Contact and Rubbing of Flat Surfaces” [1], in which he analyzed the contact of rough surfaces and on this basis, among other things, formulated the law of adhesive wear. This energy can relax by dislodging wear particles, but only if the stored elastic energy is larger than the energy needed to create new free surfaces, ~ wD 2 , where w is the specific work of separation: 2 3 20 2 D wD G   .
    keywords: archard; contact; law; rabinowicz; size; wear; work
       cache: fumecheng-4828.pdf
  plain text: fumecheng-4828.txt

        item: #331 of 526
          id: fumecheng-4840
      author: Blagojević, Vladislav; Ranđelović, Saša; Nikolić, Vlastimir; Dudić, Slobodan
       title: AUTOMATIC GENERATION OF THE PLC PROGRAMS FOR THE SEQUENTIAL CONTROL OF PNEUMATIC ACTUATORS
        date: 2019
       words: 3840
      flesch: 50
     summary: If pneumatic actuators are used to perform the operations, these systems are called sequential control pneumatic systems. In pneumatic sequential control systems, the designation of the movement of actuators between only two end positions is:  Ci+, for the extend direction of movement for linear actuators and the right direction of movement for semi-rotary drives, and, 
    keywords: actuator; automatic; control; movement; plc; program; step
       cache: fumecheng-4840.pdf
  plain text: fumecheng-4840.txt

        item: #332 of 526
          id: fumecheng-4867
      author: Kim, Sangkyu; Jang, Yong Hoon; Barber, James R.
       title: WEDGING OF FRICTIONAL ELASTIC SYSTEMS
        date: 2019
       words: 3357
      flesch: 65
     summary: The condition for wedging is reduced to the requirement that a prescribed set of constraint vectors should fail to positively span the N-dimensional vector space of nodal displacements. Constraint vectors When there are no external loads, the inequalities (6) take the form vfBA vfBA N j jijij N j jijij    11 0)( and0)( (7) Wedging of Frictional Elastic Systems 145 using Eq.
    keywords: condition; contact; friction; system; wedging
       cache: fumecheng-4867.pdf
  plain text: fumecheng-4867.txt

        item: #333 of 526
          id: fumecheng-4870
      author: Li, Qiang; Forsbach, Fabian; Benad, Justus
       title: NUMERICAL IMPLEMENTATION OF FRETTING WEAR IN THE FRAMEWORK OF THE MDR
        date: 2019
       words: 2519
      flesch: 64
     summary: Two numerical methods are proposed to improve accuracy of the numerical calculation of fretting wear in the framework of the Method of Dimensionality Reduction (MDR). In these two methods, the transformation equations are reformulated to weaken the singularity of the integrals and a stable simulation of fretting wear is realized even with the wear models which go beyond the classical Archard law.
    keywords: wear
       cache: fumecheng-4870.pdf
  plain text: fumecheng-4870.txt

        item: #334 of 526
          id: fumecheng-4893
      author: Leksycki, Kamil; Feldshtein, Eugene; Ociepa, Michał
       title: ON THE EFFECT OF THE SIDE FLOW OF 316L STAINLESS STEEL IN THE FINISH TURNING PROCESS UNDER DRY CONDITIONS
        date: 2021
       words: 3237
      flesch: 62
     summary: In the zone of an intense plastic side flow (red color) for higher cutting speeds and lower feed rates an irregular distribution of single burrs and a few clear areas of the 340 K. LEKSYCKI, E. FELDSHTEIN, M. OCIEPA flowing material were observed, whereas within the range of medium cutting speeds and lower feed rates side flow was regular on the whole length of the machined surface. As stated in Grzesik [17], the phenomenon of side flow can also be caused by the outflow of the material plasticized under high temperatures and high pressure values generated in the cutting zone and caused by a worn out cutting wedge.
    keywords: cutting; feed; flow; material; steel; surface; turning
       cache: fumecheng-4893.pdf
  plain text: fumecheng-4893.txt

        item: #335 of 526
          id: fumecheng-4916
      author: Ciavarella, Michele; Papangelo, Antonio
       title: SOME SIMPLE RESULTS ON THE MULTISCALE VISCOELASTIC FRICTION
        date: 2019
       words: 6161
      flesch: 63
     summary: (15) We obtain from the general Persson’s model (6) 0 3 1 1 d ( ) ( ) ( ) 2 q q q q C q S q P q I  , (16) 18. Genovese, A., Carputo, F., Ciavarella, M., Farroni, F., Papangelo, A., Sakhnevych, A., 2019, Analysis of multiscale theories for viscoelastic rubber friction, Proceedings AIMETA 2019 XXIV Conference
    keywords: friction; q h
       cache: fumecheng-4916.pdf
  plain text: fumecheng-4916.txt

        item: #336 of 526
          id: fumecheng-492
      author: Korunović, Nikola; Stojković, Miloš; Mišić, Dragan; Trajanović, Miroslav
       title: FEM BASED PARAMETRIC DESIGN STUDY OF TIRE PROFILE USING DEDICATED CAD MODEL AND TRANSLATION CODE
        date: 2014
       words: 4226
      flesch: 60
     summary: Tire models are inflated to the pressure of 2 bar (0.2 N\mm 2 ). 4. CONCLUSION A parametric design study of tire profile shape and belt width is presented in order to illustrate the use of the proposed approach to the FEM application in tire design.
    keywords: cad; design; finite; model; parameters; parametric; study; tire
       cache: fumecheng-492.pdf
  plain text: fumecheng-492.txt

        item: #337 of 526
          id: fumecheng-4922
      author: Tricarico, Michele; Papangelo, Antonio; Constantinescu, Andrei; Ciavarella, Michele
       title: ON ADHESIVE THEORIES IN MULTILAYERED INTERFACES, WITH PARTICULAR REGARD TO "SURFACE FORCE APPARATUS" GEOMETRY
        date: 2019
       words: 3115
      flesch: 55
     summary: [3] and Israelachvili and Tabor [4], it comprises thin sheets of molecularly smooth mica, or similar material, glued to the cylindrical glass lenses of equal radii, which are then pressed into elastic contact with their axes at right angles. Assuming the final value of displacement δ2 [displacement control], contact areas A1 and δ1 are obtained by minimizing the total potential energy 1U A   (6)
    keywords: contact; control; displacement; force; layer; load; sfa
       cache: fumecheng-4922.pdf
  plain text: fumecheng-4922.txt

        item: #338 of 526
          id: fumecheng-4923
      author: Hess, Markus
       title: A STUDY ON GROSS SLIP AND FRETTING WEAR OF CONTACTS INVOLVING A POWER-LAW GRADED ELASTIC HALF-SPACE
        date: 2019
       words: 7070
      flesch: 66
     summary: Ke, L.L., Wang, Y.S., 2010, Fretting contact of two dissimilar elastic bodies with functionally graded coatings, Mechanics of Advanced Materials and Structures, 17(6), pp. 433-447. 23. 47 - 64 https://doi.org/10.22190/FUME190121010H © 2019 by University of Niš, Serbia | Creative Commons License: CC BY-NC-ND Original scientific paper  A STUDY ON GROSS SLIP AND FRETTING WEAR OF CONTACTS INVOLVING A POWER-LAW GRADED ELASTIC HALF-SPACE Markus Heß Department of System Dynamics and Friction Physics, Berlin University of Technology, Germany Abstract.
    keywords: contact; force; fretting; half; k k; law; power; space; state; wear
       cache: fumecheng-4923.pdf
  plain text: fumecheng-4923.txt

        item: #339 of 526
          id: fumecheng-4951
      author: Jovanović, Vesna; Janošević, Dragoslav; Pavlović, Jovan
       title: ANALYSIS OF THE INFLUENCE OF THE DIGGING POSITION ON THE LOADING OF THE AXIAL BEARING OF SLEWING PLATFORM DRIVE MECHANISMS IN HYDRAULIC EXCAVATORS
        date: 2021
       words: 5607
      flesch: 36
     summary: The paper defines the general mathematical model of hydraulic excavators for determining the boundary and possible digging resistances and equivalent loads of the axial bearing of the slewing platform drive mechanism throughout the excavator’s working area. In the synthesis of the slewing platform drive mechanism of hydraulic excavators, one first chooses the axial bearing, which attaches the slewing platform to the support and movement mechanism of the excavator.
    keywords: bearing; bucket; digging; drive; excavator; kinematic; mechanism; platform; position; resistance; slewing; slewing platform
       cache: fumecheng-4951.pdf
  plain text: fumecheng-4951.txt

        item: #340 of 526
          id: fumecheng-4967
      author: Filippov, Alexander E.; Gorb, Stanislav N.
       title: METHODS OF THE PATTERN FORMATION IN NUMERICAL MODELING OF BIOLOGICAL PROBLEMS
        date: 2019
       words: 12725
      flesch: 54
     summary: In purely local approximation, the system Eq. (22) can be reduced to the form of ordinary differential equations: 230 A.E. FILIPPOV, S.N. GORB 2 1 1 1 1 1 1 2/ (1 )[ ( , )]t C r t B           (23) 2 1 1 1 2 2 2 1 2 2 2/ (1 )[ ( , )] (0.5 )(1 )t C r t B                 . [ ( , )]t c C r t B               (22) 2 1 2 2 1 1 2 2 2 1 2 2 2/ [ (1 )]
    keywords: density; energy; equation; fig; formation; model; pattern; phase; process; structure; surface; system; time
       cache: fumecheng-4967.pdf
  plain text: fumecheng-4967.txt

        item: #341 of 526
          id: fumecheng-4971
      author: Noll, Max-Uwe; Lentz, Lukas; von Wagner, Utz
       title: ON THE DISCRETIZATION OF A BISTABLE CANTILEVER BEAM WITH APPLICATION TO ENERGY HARVESTING
        date: 2019
       words: 5193
      flesch: 56
     summary: 2 Experimental setup with bistable cantilever beam excited by a shaker (left) and beam with magnets in detail (right) Cazottes, P., Fernandes, A., Pouget, J., Hafez, M., 2009, Bistable buckled beam: modeling of actuating force and experimental validations, Journal of Mechanical Design, 131(10), 101001. 17.
    keywords: ansatz; beam; case; energy; excitation; fig; shapes; vibration
       cache: fumecheng-4971.pdf
  plain text: fumecheng-4971.txt

        item: #342 of 526
          id: fumecheng-500
      author: Oveisi, Atta; Nestorović, Tamara
       title: ROBUST MIXED H2/H8 ACTIVE VIBRATION CONTROLLER IN ATTENUATION OF SMART BEAM
        date: 2014
       words: 5538
      flesch: 58
     summary: Since the actuator placement plays an important role in vibration control performance the optimal placement of the actuator is addressed based on the mixed H2 / H method that is described by Nestorović and Trajkov [27]. 3. Carra, S., Amabili, M., Ohayon, R., Hutin, P. M., 2008, Active vibration control of a thin rectangular plate in air or in contact with water in presence of tonal primary disturbance, Aerospace Science and Technology, 12, pp. 54-61. 4.
    keywords: beam; control; controller; fig; k k; loop; performance; system; t t; vibration
       cache: fumecheng-500.pdf
  plain text: fumecheng-500.txt

        item: #343 of 526
          id: fumecheng-5001
      author: Eremina, Galina M.; Smolin, Alexey Yu.
       title: MULTILEVEL NUMERICAL MODEL OF HIP JOINT ACCOUNTING FOR FRICTION IN THE HIP RESURFACING ENDOPROSTHESIS
        date: 2019
       words: 4149
      flesch: 48
     summary: Bouzakis, K.-D., Michailidis, N., Hadjiyiannis, S., Skordaris, G., Erkens, G., 2002, The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation, Materials Characterization, 49(2), pp. 149-156. The influence of the coating thickness on the load-displacement curve for the instrumented indentation of ceramic coatings on the metal substrate is studied in [6-8].
    keywords: coating; endoprosthesis; fig; friction; hip; model; resurfacing; stress; titanium
       cache: fumecheng-5001.pdf
  plain text: fumecheng-5001.txt

        item: #344 of 526
          id: fumecheng-5014
      author: Balokhonov, Ruslan; Romanova, Varvara
       title: ON THE PROBLEM OF STRAIN LOCALIZATION AND FRACTURE SITE PREDICTION IN MATERIALS WITH IRREGULAR GEOMETRY OF INTERFACES
        date: 2019
       words: 4676
      flesch: 50
     summary: A prominent example of plastic strain localization is a familiar necking phenomenon. The second stage represents formation of well-defined shear bands oriented at an angle of 45 degrees to the loading direction and plastic strain localization in the bands.
    keywords: coating; deformation; fig; localization; material; plastic; regions; strain; stress; substrate
       cache: fumecheng-5014.pdf
  plain text: fumecheng-5014.txt

        item: #345 of 526
          id: fumecheng-5050
      author: Marković, Danijel; Petrovć, Goran; Ćojbašić, Žarko; Stanković, Aleksandar
       title: THE VEHICLE ROUTING PROBLEM WITH STOCHASTIC DEMANDS IN AN URBAN AREA – A CASE STUDY
        date: 2020
       words: 5663
      flesch: 59
     summary: Various vehicle routing problems are derived from the CVRP such as: Fig. Avci, M., Topaloglu, S., 2016, A hybrid metaheuristic algorithm for heterogeneous vehicle routing problem with simultaneous pickup and delivery, Expert Systems with Applications, 53, pp.160-171. 12.
    keywords: algorithm; node; problem; routing; solution; transport; vehicle; waste
       cache: fumecheng-5050.pdf
  plain text: fumecheng-5050.txt

        item: #346 of 526
          id: fumecheng-5058
      author: Argatov, Ivan
       title: FROM WINKLER’S FOUNDATION TO POPOV’S FOUNDATION
        date: 2019
       words: 3938
      flesch: 58
     summary: [22] that — as far as one is interested in the stiffness of the Hertzian type contact — the three-dimensional contact problem can be reduced to a one-dimensional problem for a Winkler foundation, the MDR has grown to become a comprehensive methodology for dealing with a wide class of elastic contacts. To conclude, Popov’s foundation, which serves as the basis for the MDR, represents a major advance in developing a unified approach to effective dealing with elastic contacts.
    keywords: area; contact; foundation; mdr; mechanics; popov; winkler
       cache: fumecheng-5058.pdf
  plain text: fumecheng-5058.txt

        item: #347 of 526
          id: fumecheng-5070
      author: Popov, Valentin
       title: FOREWORD
        date: 2019
       words: 1214
      flesch: 38
     summary: Only deviation from this bound (for example due to transport of wear particles) makes the dependency of wear intensity on the specific work of separation possible. Wear belongs to the most complicated tribological phenomena, but still remains not well understood.
    keywords: contact; law; paper; wear
       cache: fumecheng-5070.pdf
  plain text: fumecheng-5070.txt

        item: #348 of 526
          id: fumecheng-5078
      author: Danković, Nikola; Antić, Dragan; Nikolić, Saša; Milojković, Marko; Perić, Staniša
       title: NEW CLASS OF DIGITAL MALMQUIST-TYPE ORTHOGONAL FILTERS BASED ON THE GENERALIZED INNER PRODUCT; APPLICATION TO THE MODELING DPCM SYSTEM
        date: 2019
       words: 5005
      flesch: 56
     summary: A new class of cascade digital orthogonal filters of the Malmquist type based on bilinear transformation for mapping poles to zeroes and vice versa is presented in this paper. For example, in [18], the development of the pipelined structure of digital orthogonal filters started.
    keywords: digital; filters; k k; transformation
       cache: fumecheng-5078.pdf
  plain text: fumecheng-5078.txt

        item: #349 of 526
          id: fumecheng-5079
      author: Otto, Johannes; Ostermeyer, Georg-Peter
       title: HIGH-FREQUENCY VIBRATIONS IN THE CONTACT OF BRAKE SYSTEMS
        date: 2019
       words: 3661
      flesch: 58
     summary: f. Dynamik und Schwingungen, Schleinitzstraße 20, 38106 Braunschweig, Germany E-mail: j.otto@tu-bs.de 104 J. OTTO, G.-P. OSTERMEYER friction brake, in which high friction is desired. In order to make a scientific contribution to this complex topic, this work focuses on the topic of friction- induced high-frequency oscillations within the boundary layer between brake pad and brake disc.
    keywords: brake; contact; frequency; friction; khz; pad; vibrations
       cache: fumecheng-5079.pdf
  plain text: fumecheng-5079.txt

        item: #350 of 526
          id: fumecheng-5088
      author: Albu, Adriana; Precup, Radu-Emil; Teban, Teodor-Adrian
       title: RESULTS AND CHALLENGES OF ARTIFICIAL NEURAL NETWORKS USED FOR DECISION-MAKING AND CONTROL IN MEDICAL APPLICATIONS
        date: 2019
       words: 10534
      flesch: 56
     summary: This paper presents some of the results obtained by the Process Control group of the Politehnica University Timisoara, Romania, in the field of ANNs applied to modeling, prediction and decision-making related to medical systems. Precup, R.-E., Preitl, S., 1997, Popov-type stability analysis method for fuzzy control systems, Proc.
    keywords: ann; anns; control; data; decision; diseases; features; fig; input; layer; making; networks; output; patient; precup; r.-e; results; system; training
       cache: fumecheng-5088.pdf
  plain text: fumecheng-5088.txt

        item: #351 of 526
          id: fumecheng-5091
      author: Kuznetsov, Victor P.; Skorobogatov, Andrey S.; Gorgots, Vladimir G.
       title: IMPACT OF INDENTOR SLIDING VELOCITY AND LOADING REPETITION FACTOR ON SHEAR STRAIN AND STRUCTURE DISPERSION IN NANOSTRUCTURING BURNISHING
        date: 2019
       words: 3070
      flesch: 53
     summary: INTRODUCTION Burnishing implementation as a surface plastic deforming technique has been widely applied for finishing surface layers of precision parts on metal-cutting machines. Qualitative surface layers containing ultra-fine grains or nano-grains can be formed in the process of cryogenic burnishing of an AI 7050-T7451 alloy with a roller tool
    keywords: burnishing; layer; shear; shear strain; strain; surface; velocity
       cache: fumecheng-5091.pdf
  plain text: fumecheng-5091.txt

        item: #352 of 526
          id: fumecheng-5102
      author: Fomicheva, Mariia; Müller, Wolfgang H.; Vilchevskaya, Elena N.; Bessonov, Nikolay
       title: FUNNEL FLOW OF A NAVIER-STOKES-FLUID WITH POTENTIAL APPLICATIONS TO MICROPOLAR MEDIA
        date: 2019
       words: 4475
      flesch: 61
     summary: Morozova, A.S., Vilchevskaya, E.N., Müller, W.H., Bessonov, N.M., 2019, Interrelation of heat propagation and angular velocity in micropolar media, Dynamical Processes in Generalized Continua and Structures, pp. 413-425. Springer, Cham. 19. This type of problem arises, for example, during funnel flow of a viscous medium subjected to gravity (see Fig. 4).
    keywords: fig; flow; funnel; inertia; velocity
       cache: fumecheng-5102.pdf
  plain text: fumecheng-5102.txt

        item: #353 of 526
          id: fumecheng-5108
      author: Romanova, Varvara; Balokhonov, Ruslan; Emelianova, Evgeniya; Zinovieva, Olga; Zinoviev, Aleksandr
       title: MICROSTRUCTURE-BASED SIMULATIONS OF QUASISTATIC DEFORMATION USING AN EXPLICIT DYNAMIC APPROACH
        date: 2019
       words: 5041
      flesch: 45
     summary: 2 Equivalent stress (a-c) and plastic strain fields (d-f) in the polycrystalline structure meshed with 100×20×100 (a, d), 200×40×200 (b, e) and 400×80×400 resolution (c, f) Explicit calculations of uniaxial tension have been performed for the models loaded at the same strain rate of 10 2 s -1 . The element-by-element comparison between plastic strain fields obtained in dynamic and static calculations (a) and the stress-strain curves calculated using an explicit dynamic approach at different load velocities (b) In the dynamic simulations of quasi-static deformation, where load velocities are artificially increased, it is important to use rate-independent constitutive models.
    keywords: approach; deformation; fig; mesh; microstructure; numerical; rate; simulations; strain; stress; time
       cache: fumecheng-5108.pdf
  plain text: fumecheng-5108.txt

        item: #354 of 526
          id: fumecheng-5113
      author: Dmitriev, Andrey I.; Nikonov, Anton Yu.; Österle, Werner; Jim, Bai Cheng
       title: VERIFICATION OF RABINOWICZ’ CRITERION BY DIRECT MOLECULAR DYNAMICS MODELING
        date: 2019
       words: 3568
      flesch: 52
     summary: 4 Dependence of critical conditions for transitions of sliding regime on sample width and temperature conditions In order to verify Eqs. Lx = 30.0 nm, T = 500 K. (e) Trajectories of atoms of the specimen with Lx = 15.0 nm after 1.0 ns of sliding at 500 K. Arrow marks the direction of atoms rotation According to the simulation results the critical temperature (Tc) above which the transition from unstable behavior with debris formation to smooth sliding conditions is taking place is about 500 K. For two other specimens with Lx=22.5 nm and Lx=30.0 nm, temperature Tc is also close to 500 K, while for the narrowest specimen with the width of only 10.0 nm the critical temperature is much lower and is about 300 K. This means that the size of the 212 A.I. DMITIREV, A.YU.
    keywords: conditions; fig; sample; sliding; temperature; wear
       cache: fumecheng-5113.pdf
  plain text: fumecheng-5113.txt

        item: #355 of 526
          id: fumecheng-5164
      author: Pavlović, Ivan R.; Pavlović, Ratko; Janevski, Goran; Despenić, Nikola; Pajković, Vladimir
       title: DYNAMIC BEHAVIOR OF TWO ELASTICALLY CONNECTED NANOBEAMS UNDER A WHITE NOISE PROCESS
        date: 2020
       words: 2820
      flesch: 52
     summary: By means of the Lyapunov exponent and the moment Lyapunov exponent method the stochastic stability of the nano system is analyzed for different system parameters under an axial load modeled as a wideband white noise process. A systematic study of the moment Lyapunov exponents is presented in the works of Xie
    keywords: exponent; lyapunov; moment; stability; system
       cache: fumecheng-5164.pdf
  plain text: fumecheng-5164.txt

        item: #356 of 526
          id: fumecheng-5170
      author: Nakano, Ken; Kado, Naohiro; Tadokoro, Chiharu; Nagamine, Takuo
       title: MECHANICAL STRUCTURE DESIGN TO AVOID FRICTION-INDUCED INSTABILITIES: IN-PLANE ANISOTROPY AND IN-PLANE ASYMMETRY
        date: 2019
       words: 4183
      flesch: 63
     summary: By introducing the minimum modal damping ratio, the degree of stability is quantified and shown as the stability maps, which would be helpful for selecting the two quantities in the mechanical structure design of sliding systems. [1] (e.g., the frictional force of lubricated sliding systems operating under mixed lubrication conditions).
    keywords: plane; sliding; system
       cache: fumecheng-5170.pdf
  plain text: fumecheng-5170.txt

        item: #357 of 526
          id: fumecheng-5171
      author: Simonović, Miloš; Kovandžić, Marko; Nikolić, Vlastimir; Stojčić, Mihajlo; Knežević, Darko
       title: ARTIFICIAL NEURAL NETWORK APPLICATION FOR THE TEMPORAL PROPERTIES OF ACOUSTIC PERCEPTION
        date: 2019
       words: 4837
      flesch: 47
     summary: Using artificial neural networks makes acoustic signal processing very comfortable from the mathematical point of view. In the experiment, artificial neural networks were chosen, as a proven pattern recognition tool, for processing acoustic signals [3].
    keywords: localization; network; perception; procedure; recognition; signal; sound; source; tdoa; time; training
       cache: fumecheng-5171.pdf
  plain text: fumecheng-5171.txt

        item: #358 of 526
          id: fumecheng-519
      author: Janevski, Goran; Stamenković, Marija; Seabra, Mariana
       title: THE CRITICAL LOAD PARAMETER OF A TIMOSHENKO BEAM WITH ONE-STEP CHANGE IN CROSS SECTION
        date: 2014
       words: 6263
      flesch: 78
     summary: It can be noticed that the CLP values are maximal for beam type 3, while for beam type 1 are minimal. The influence of the beam type is higher for lower values , as well as that of dimension ratio 2 for beam type 1 in relation to beam type 3.
    keywords: beam; clp; r r; type; u r
       cache: fumecheng-519.pdf
  plain text: fumecheng-519.txt

        item: #359 of 526
          id: fumecheng-5191
      author: Tomov, Pancho; Dimitrov, Lubomir
       title: THE ROLE OF DIGITAL INFORMATION MODELS FOR HORIZONTAL AND VERTICAL INTERACTION IN INTELLIGENT PRODUCTION
        date: 2019
       words: 2875
      flesch: 36
     summary: A well-established production and engineering system is one of the prerequisites for the normal operation of intelligent production systems. The Role of Digital Information Models for Horizontal and Vertical Interaction in Intelligent Production 403 These ERP systems are integrated with technological processes that are compatible with intelligent production systems.
    keywords: data; development; fig; information; production; software; systems
       cache: fumecheng-5191.pdf
  plain text: fumecheng-5191.txt

        item: #360 of 526
          id: fumecheng-5192
      author: Pavlović, Milan; Nikolić, Vlastimir; Simonović, Miloš; Mitrović, Vladimir; Ćirić, Ivan
       title: EDGE DETECTION PARAMETER OPTIMIZATION BASED ON THE GENETIC ALGORITHM FOR RAIL TRACK DETECTION
        date: 2019
       words: 5703
      flesch: 57
     summary: Deng, C., Wang, G., Yang, X., 2013, Image edge detection algorithm based on improved canny operator, Proc. International Conference on Wavelet Analysis and Pattern Recognition, pp. 168-172. Skokhan,M. H., 2014, An efficient approach for improving canny edge detection algorithm, International Journal of Advances in Engineering & Technology, 7, pp. 59-65. 28.
    keywords: algorithm; detection; edge; edge detection; image; method; threshold; value
       cache: fumecheng-5192.pdf
  plain text: fumecheng-5192.txt

        item: #361 of 526
          id: fumecheng-5197
      author: Petrović, Goran; Mihajlović, Jelena; Ćojbašić, Žarko; Madić, Miloš; Marinković, Dragan
       title: COMPARISON OF THREE FUZZY MCDM METHODS FOR SOLVING THE SUPPLIER SELECTION PROBLEM
        date: 2019
       words: 6087
      flesch: 49
     summary: This section will briefly review the previous research studies focused on the use of fuzzy MCDM methods for supplier evaluation and selection. To overcome those challenges, fuzzy MCDM methods are ideal solutions.
    keywords: alternative; criteria; decision; evaluation; methods; selection; step; supplier; topsis; values; ̃ ̃
       cache: fumecheng-5197.pdf
  plain text: fumecheng-5197.txt

        item: #362 of 526
          id: fumecheng-5216
      author: Singh, Gurpreet; Lamichhane, Yubraj; Bhui, Amandeep Singh; Sidhu, Sarabjeet Singh; Bains, Preetkanwal Singh; Mukhiya, Prabin
       title: SURFACE MORPHOLOGY AND MICROHARDNESS BEHAVIOR OF 316L IN HAP-PMEDM
        date: 2019
       words: 3937
      flesch: 50
     summary: This research work was conducted to investigate the influence of nano hydroxyapatite (HAp) powder mixed electrical discharge machining (PMEDM) on surface morphology and microhardness of modified 316L stainless steel surface. Key Words: PMEDM, 316L SS, Copper Tool, HAp Powder, Microhardness, Bioactivity 1. INTRODUCTION Biomaterials are artificial organs or implants preferably from the family of ceramics, polymeric and metallic biomaterials (titanium alloys, stainless steel 316L and Cr-Co alloys) for the substitution of the damaged human body organ.
    keywords: 316l; dielectric; hap; hydrocarbon; microhardness; oil; powder; steel; surface
       cache: fumecheng-5216.pdf
  plain text: fumecheng-5216.txt

        item: #363 of 526
          id: fumecheng-5230
      author: Banić, Milan; Miltenović, Aleksandar; Pavlović, Milan; Ćirić, Ivan
       title: INTELLIGENT MACHINE VISION BASED RAILWAY INFRASTRUCTURE INSPECTION AND MONITORING USING UAV
        date: 2019
       words: 3410
      flesch: 49
     summary: Canny edge detector has shown promising results for rail tracks detection, while some intelligent algorithms have great potential in adaptive adjustment of parameters of conventional image processing algorithms. Karakose, M., Yaman, O., Baygin, M., Murat, K., Akin, E., 2017, A new computer vision based method for rail track detection and fault diagnosis in railways, International Journal of Mechanical Engineering and Robotics Research, 6(1), pp. 22-27. 7.
    keywords: detection; edge; image; infrastructure; inspection; monitoring; railway; uav; vision
       cache: fumecheng-5230.pdf
  plain text: fumecheng-5230.txt

        item: #364 of 526
          id: fumecheng-5252
      author: Mohamad, Barhm; Karoly, Jalics; Zelentsov, Andrei
       title: CFD MODELLING OF FORMULA STUDENT CAR INTAKE SYSTEM
        date: 2020
       words: 3694
      flesch: 54
     summary: [1] showed the effect of different air inlet restrictors on engine performance of Formula Student car engine using AVL BOOST numerical simulation model and the research was carried out on restrictor diameters, which varied from 15 mm to 60 mm. 7. Winterbone, E., Pearson, R., Horlock, J., 2000, Theory of engine manifold design: wave action methods for IC engines, Professional Engineering Publ.
    keywords: air; car; cfd; design; engine; fig; formula; intake; model; plenum; pressure; system
       cache: fumecheng-5252.pdf
  plain text: fumecheng-5252.txt

        item: #365 of 526
          id: fumecheng-5263
      author: Kovalchuk, Vitalii; Sysyn, Mykola; Gerber, Ulf; Nabochenko, Olga; Zarour, Jandab; Dehne, Stefan
       title: EXPERIMENTAL INVESTIGATION OF THE INFLUENCE OF TRAIN VELOCITY AND TRAVEL DIRECTION ON THE DYNAMIC BEHAVIOR OF STIFF COMMON CROSSINGS
        date: 2019
       words: 4628
      flesch: 46
     summary: Common crossing rails are subjected to a rapid deterioration of the rolling surface due to a dynamic loading of trains. Common crossing rails are the most short-living elements of S&C with lifecycle up to 5 times shorter than that of the ordinary track rails.
    keywords: analysis; crossing; direction; displacement; fig; frog; rail; strain; trailing; travel; velocity; wheel
       cache: fumecheng-5263.pdf
  plain text: fumecheng-5263.txt

        item: #366 of 526
          id: fumecheng-5297
      author: Goryacheva, Irina G.; Torskaya, Elena V.
       title: CONTACT OF MULTI-LEVEL PERIODIC SYSTEM OF INDENTERS WITH COATED ELASTIC HALF-SPACE
        date: 2019
       words: 4367
      flesch: 53
     summary: Numerical- analytical method is developed to determine contact pressure distribution and internal stresses taking into account mutual effect of contact spots. Contact pressure is presented as a stepwise function being constant inside each element.
    keywords: contact; curves; effect; indenters; level; pressure; space; system
       cache: fumecheng-5297.pdf
  plain text: fumecheng-5297.txt

        item: #367 of 526
          id: fumecheng-5304
      author: Diyaley, Sunny; Chakraborty, Shankar
       title: OPTIMIZATION OF MULTI-PASS FACE MILLING PARAMETERS USING METAHEURISTIC ALGORITHMS
        date: 2019
       words: 7926
      flesch: 57
     summary: Finally, these metaheuristics are employed for multi-objective optimization of the considered multi-pass milling process while concurrently minimizing both the objectives. For multi-objective optimization of both the total production time and total production cost, the objective function of Eq.
    keywords: algorithm; cost; cut; face; milling; min; objective; operation; optimization; pass; production; time; tool; total
       cache: fumecheng-5304.pdf
  plain text: fumecheng-5304.txt

        item: #368 of 526
          id: fumecheng-5356
      author: Mastrogiannakis, Iakovos; Vosniakos, George-Christopher
       title: EXPLORING STRUCTURAL DESIGN OF THE FRANCIS HYDRO-TURBINE BLADES USING COMPOSITE MATERIALS
        date: 2020
       words: 4586
      flesch: 56
     summary: Failure criteria for composite blades refer to laminate plies (e.g. Max Strain, Max Stress, Tsai-Wu, Tsai-Hill, Hoffman, Hashin, Puck, LaRC and Cuntze). Fluid flow analysis The blade under consideration was hydrodynamically designed at the Laboratory of Hydraulic Turbomachines the National Technical University of Athens (NTUA) as part of the small Francis hydroturbine runner with basic dimensions as follows: diameter 413 mm, height 100 mm, and maximum blade thickness 4 mm.
    keywords: blade; design; failure; fig; inlet; layer; model; thickness; water
       cache: fumecheng-5356.pdf
  plain text: fumecheng-5356.txt

        item: #369 of 526
          id: fumecheng-5385
      author: Bains, Preetkanwal Singh; Grewal, Jasmaninder Singh; Sidhu, Sarabjeet Singh; Kaur, Sandeep; Singh, Gurpreet
       title: SURFACE MODIFICATION OF RING-TRAVELER OF TEXTILE SPINNING MACHINE FOR SUBSTANTIALITY
        date: 2020
       words: 4323
      flesch: 58
     summary: Typical X-ray diffractograms (Fig. 7) for plasma sprayed coatings on E52100 specimens were carried out for phase identification with a rate of scanning ranging from 1º to 100º/min (2Theta) with Cu-Kα radiation equals to 1.5418Å. Surface Modification of Ring-Traveler of Textile Spinning Machine for Substantiality 37 Table 4 Experimentation design and results Trials Coatings Load CVL (mm3) S/N Ratio (dB) R1 R2 1 WC-Co-Cr 30 0.059 0.061 24.4358 2 WC-Co-Cr 40 0.048 0.052 26.0137 3 WC-Co-Cr 50 0.090 0.101 20.3856 4 Al2O3 +13TiO2 30 0.084 0.084 21.5144 5 Al2O3 +13TiO2 40 0.083 0.086 21.4615 6 Al2O3 +13TiO2 50 0.099 0.111 19.5621 7 Cr3C2NiCr 30 0.300 0.299 10.4721 8 Cr3C2NiCr 40 0.665 0.665 3.5436 9 Cr3C2NiCr 50 0.528 0.531 5.5226 Hence, the wear resistance of plasma sprayed coatings generated on E52100 substrate was recorded as WC-Co-Cr > Al2O3 +13TiO2 > Cr3C2NiCr in their decreasing order.
    keywords: al2o3; coatings; cr3c2nicr; e52100; fig; plasma; ring; surface; wear
       cache: fumecheng-5385.pdf
  plain text: fumecheng-5385.txt

        item: #370 of 526
          id: fumecheng-5466
      author: Marinković, Dragan; Rama, Gil; Zehn, Manfred
       title: ABAQUS IMPLEMENTATION OF A COROTATIONAL PIEZOELECTRIC 3-NODE SHELL ELEMENT WITH DRILLING DEGREE OF FREEDOM
        date: 2019
       words: 6331
      flesch: 61
     summary: Key Words: Abaqus, Corotational FEM, Piezoelectric shell element, Discrete shear gap, Assumed natural deviatoric strain 1. INTRODUCTION Nestorovic, T., Marinkovic, D., Chandrashekar, G., Marinkovic, Z., Trajkov, M., 2012, Implementation of a user defined piezoelectric shell element for analysis of active structures, Finite Elements in Analysis and Design, 52, pp. 11-22.
    keywords: element; piezoelectric; shell;  ;  
       cache: fumecheng-5466.pdf
  plain text: fumecheng-5466.txt

        item: #371 of 526
          id: fumecheng-547
      author: Kyrarini, Maria; Slavnić, Siniša; Ristić-Durrant, Danijela
       title: FUZZY CONTROLLER FOR THE CONTROL OF THE MOBILE PLATFORM OF THE CORBYS ROBOTIC GAIT REHABILITATION SYSTEM
        date: 2014
       words: 3671
      flesch: 60
     summary: Due to the lack of information on the steering motors and load characteristics, a fuzzy logic controller is designed and implemented for the steering angle position control of each wheel of CORBYS mobile platform. Namely, since the driving DC motors are able to drive in 2 directions only - forward and backwards, the value of steering angle is limited to [-90°, 90°].
    keywords: angle; control; corbys; fig; mobile; platform; steering; system; wheel
       cache: fumecheng-547.pdf
  plain text: fumecheng-547.txt

        item: #372 of 526
          id: fumecheng-5507
      author: Hess, Markus; Pohrt, Roman; Starcevic, Jasminka
       title: FOREWORD
        date: 2019
       words: 1707
      flesch: 51
     summary: And perhaps most admirable in this story is the courage and hope that Prof. Valentin L. Popov has shown to pursue his own idea in spite of the critique it has received from fellow scholars. Indeed, Valentin Popov has always been and continues to be successful in tying international bonds due to his supportive and generous character.
    keywords: colleagues; popov; prof; research; system; valentin
       cache: fumecheng-5507.pdf
  plain text: fumecheng-5507.txt

        item: #373 of 526
          id: fumecheng-564
      author: Dhanuskodi, Saravanan; Wilson, Vincent; Kumarasamy, Sudhakar
       title: DESIGN AND THERMAL PERFORMANCE OF THE SOLAR BIOMASS HYBRID DRYER FOR CASHEW DRYING
        date: 2014
       words: 4728
      flesch: 61
     summary: Variation of moisture content with drying time is shown in Fig.6. 6 Variation of moisture content with drying time 4.3.
    keywords: air; biomass; cashew; collector; dryer; drying; efficiency; energy; hybrid; mode; solar; temperature
       cache: fumecheng-564.pdf
  plain text: fumecheng-564.txt

        item: #374 of 526
          id: fumecheng-5678
      author: Vidaković, Jelena; Kvrgić, Vladimir; Lazarević, Mihailo; Stepanić, Pavle
       title: COMPUTED TORQUE CONTROL FOR A SPATIAL DISORIENTATION TRAINER
        date: 2020
       words: 4648
      flesch: 54
     summary: Process and controller parameters for PI speed control are given in Table 1. The short-lasting high values of error in PI speed control for joint 2 at certain time instants are caused by sudden and large changes in load torque τLD2 in those instants.
    keywords: control; controller; fig; joint; model; robot; sdt; speed; torque
       cache: fumecheng-5678.pdf
  plain text: fumecheng-5678.txt

        item: #375 of 526
          id: fumecheng-5750
      author: Čiča, Đorđe; Zeljković, Milan; Tešić, Saša
       title: DYNAMICAL CONTACT PARAMETER IDENTIFICATION OF SPINDLE-HOLDER-TOOL ASSEMBLIES USING SOFT COMPUTING TECHNIQUES
        date: 2020
       words: 5721
      flesch: 47
     summary: Erturk, A., Ozguven, H.N., Budak, E., 2006, Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF, International Journal of Machine Tools and Manufacture, 46(15), pp. The identification approach based on GA was also experimentally verified in terms of identification contact parameters at the holder-tool interface of a free-free spindle-holder-tool assembly.
    keywords: assembly; contact; frf; holder; identification; interface; optimization; parameters; spindle; stiffness; tool
       cache: fumecheng-5750.pdf
  plain text: fumecheng-5750.txt

        item: #376 of 526
          id: fumecheng-5785
      author: Jozić, Sonja; Dumanić, Ivana; Bajić, Dražen
       title: EXPERIMENTAL ANALYSIS AND OPTIMIZATION OF THE CONTROLLABLE PARAMETERS IN TURNING OF EN AW-2011 ALLOY; DRY MACHINING AND ALTERNATIVE COOLING TECHNIQUES
        date: 2020
       words: 6710
      flesch: 51
     summary: Tripathy, S., Tripathy, D.K., 2017, Multi-response optimization of machining process parameters for powder mixed electro-discharge machining of H-11 die steel using grey relational analysis and topsis. As noted earlier, the objective of this study is to research the effects of cutting environments (dry machining, MQL, MQL + CCA) on surface roughness, cutting force component in the Z direction and on the material removal rate in the longitudinal turning at varying cutting parameters (cutting speed, feed rate, depth of cut).
    keywords: analysis; cooling; cutting; force; grey; machining; mql; mql+cca; parameters; process; rate; roughness; surface; turning
       cache: fumecheng-5785.pdf
  plain text: fumecheng-5785.txt

        item: #377 of 526
          id: fumecheng-583
      author: Badii, Atta; Khan, Ali; Raval, Rajkumar; Oudi, Hamid; Ayora, Ricardo; Khan, Wasiq; Jaidi, Amine; Viswanathan, Nagarajan
       title: SITUATION ASSESSMENT THROUGH MULTI-MODAL SENSING OF DYNAMIC ENVIRONMENTS TO SUPPORT COGNITIVE ROBOT CONTROL
        date: 2014
       words: 4139
      flesch: 43
     summary: In this paper, we report a novel generic Situation Assessment Architecture for robotic systems directly assisting humans as developed in the CORBYS project. An innovative generic Situation Assessment Architecture for robotic systems has Received October 23, 2014 / Accepted November 25, 2014
    keywords: architecture; assessment; context; corbys; data; demonstrator; environment; gait; robot; situation; system
       cache: fumecheng-583.pdf
  plain text: fumecheng-583.txt

        item: #378 of 526
          id: fumecheng-5855
      author: Bekal, Chandrakantha; Shenoy, Satish; Shetty, Ranjan
       title: NUMERICAL INVESTIGATION OF THE INFLUENCE OF THE LINK POSITIONING IN THE CORONARY STENT INSIDE THE NORMAL ARTERY: A COMPARATIVE STUDY OF TWO COMMERCIAL STENT DESIGNS
        date: 2023
       words: 4253
      flesch: 55
     summary: 9 Artery and stent surface after expansion, indicating larger tissue prolapse through stent struts at location without link (a) and no prolapse at location with link (b) (legend unit, mm) Clinicians are encountered with a variety of stent designs to choose from with a variety of geometrical configurations [7].
    keywords: arterial; artery; design; displacement; fig; link; stent; stress; surface; vms
       cache: fumecheng-5855.pdf
  plain text: fumecheng-5855.txt

        item: #379 of 526
          id: fumecheng-5869
      author: Agarwal, Subham; Dandge, Shruti Sudhakar; Chakraborty, Shankar
       title: PARAMETRIC ANALYSIS OF A GRINDING PROCESS USING THE ROUGH SETS THEORY
        date: 2020
       words: 8341
      flesch: 58
     summary: Thus, in this paper, a maiden endeavor is put forward to apply the concepts of the RST to a grinding process so as study the effects of various grinding parameters on different measured responses and predict the optimal settings of those parameters. These rules simply depict the relationships between various grinding parameters and responses to effectively control the said grinding operation.
    keywords: data; grinding; low; parameters; process; q =; qty =; responses; rule; speed; surface
       cache: fumecheng-5869.pdf
  plain text: fumecheng-5869.txt

        item: #380 of 526
          id: fumecheng-5876
      author: Ali, Hafiz Tauqeer; Akrami, Roya; Fotouhi, Sakineh; Pashmforoush, Farzad; Fragassa, Cristiano; Fotouhi, Mohammad
       title: EFFECT OF THE STACKING SEQUENCE ON THE IMPACT RESPONSE OF CARBON-GLASS/EPOXY HYBRID COMPOSITES
        date: 2020
       words: 3094
      flesch: 54
     summary: Most of the work done to-date on hybrid composites has concerned hybrids under tensile [17, 18], bending and compression loadings Some of the common stacking sequences used in hybrid composites are intermingled continuous fibers [31], intermingled aligned short fibers [32], interlayer or sandwiched layers
    keywords: carbon; composites; glass; hybrid; impact; load
       cache: fumecheng-5876.pdf
  plain text: fumecheng-5876.txt

        item: #381 of 526
          id: fumecheng-5878
      author: Korunović, Nikola; Banić, Milan; Trifunović, Milan; Pavlović, Ana
       title: BERGSTRÖM-BOYCE VS. HYPERELASTIC RUBBER MODELS IN STRUCTURAL ANALYSIS OF TIRES
        date: 2021
       words: 3541
      flesch: 52
     summary: Material models considered in curve fitting were: ▪ Yeoh (Y) Significant differences in the results obtained by various models were demonstrated, especially at higher strain rates when the contribution of viscoelastic part of material models was the greatest.
    keywords: analysis; boyce; material; models; rubber; tire
       cache: fumecheng-5878.pdf
  plain text: fumecheng-5878.txt

        item: #382 of 526
          id: fumecheng-5899
      author: Janevski, Goran; Kozić, Predrag; Pavlović, Ratko; Posavljak, Strain
       title: MOMENT LYAPUNOV EXPONENTS AND STOCHASTIC STABILITY OF A THIN-WALLED BEAM SUBJECTED TO AXIAL LOADS AND END MOMENTS
        date: 2021
       words: 10898
      flesch: 71
     summary:    , 2 2 2 222 21 5 11 1 22 2 2 12 2 1 21 1 2 p p a (p sin 2 p sin 2 )cos sin 2 (p cos sin 2 sin 2 p cos sin 2 sin cot ) 4 4 = −  −   − + +  +    2 2 2 2[(p 1)sin cos ]sin },+ − +   Moment Lyapunov Exponents and Stochastic Stability of a Thin-Walled Beam Subjected to Axial ... 227 APPENDIX 3 2 2 2 2 00 1 1 2 11 22 12 21 2 2 2 2 2 10 1 2 11 22 12 21 2 2 2 2 2 2 20 11 22 12 21 12 21 2 2 30 12 21 (10 3 ) (6 ) ( ) ( ) ( ) ( ), 2 128 64 2 1 1 ( ) ( 2) ( ) ( ), 4 64 4 ( 2)( 4) 17 2( ) ( ), 256 32 3 ( ), 4 p p p p p A p p p p p p A p p p p p p p A p p p p p p A p p + + = − −  + + + + + + = −  − + + − + − + +  = + − + − +   = − 2 2 40 12 21( ),A p p= − + 2 2 2 2 01 1 2 11 22 12 21 2 2 2 2 2 2 11 1 1 2 11 22 12 21 2 2 2 2 2 21 1 2 11 22 12 21 2 2 31 11 ( 2) ( ) ( ) ( ), 4 64 16 1 7 22 8 10 56 ( ) ( ) ( ) ( ), 2 4 512 256 4 6 8 20 ( ) ( ) ( ), 8 128 32 10 24 ( 512 p p p p A p p p p p p p p p A p p p p p p p p p A p p p p p p A p + = −  − + − − − + − + − = −  −  + + + + + + + + + = −  − + − + − + + = + 2 2 2 2 2 2 22 12 21 41 12 21 10 216 )
    keywords: + ; p cos; p h; p p; p sin; p t; − −;  +
       cache: fumecheng-5899.pdf
  plain text: fumecheng-5899.txt

        item: #383 of 526
          id: fumecheng-5907
      author: Troha, Sanjin; Vrcan, Željko; Karaivanov, Dimitar; Isametova, Madina
       title: THE SELECTION OF OPTIMAL REVERSIBLE TWO-SPEED PLANETARY GEAR TRAINS FOR MACHINE TOOL GEARBOXES
        date: 2020
       words: 5793
      flesch: 62
     summary: An analytical and computer aided procedure for the multi-criteria design optimization of multi-stage gear transmission is presented in paper The process of planetary gear transmission optimization is shown in paper
    keywords: carrier; gear; optimization; stage; t t; transmission
       cache: fumecheng-5907.pdf
  plain text: fumecheng-5907.txt

        item: #384 of 526
          id: fumecheng-5908
      author: Hashemkhani Zolfani, Sarfaraz; Yazdani, Morteza; Pamucar, Dragan; Zarate, Pascale
       title: A VIKOR AND TOPSIS FOCUSED REANALYSIS OF THE MADM METHODS BASED ON LOGARITHMIC NORMALIZATION
        date: 2020
       words: 7504
      flesch: 51
     summary: Chatterjee, P., Chakraborty, S., 2014, Investigating the effect of normalization norms in flexible manufacturing system selection using multi criteria decision making methods, Journal of engineering science and technology review, 7(3), pp. 141-150. It is a fact that the selection of normalization methods has a direct effect on the results.
    keywords: alternatives; criteria; decision; madm; matrix; max; methods; normalization; results; topsis; vikor
       cache: fumecheng-5908.pdf
  plain text: fumecheng-5908.txt

        item: #385 of 526
          id: fumecheng-6053
      author: Harouz, Riad; Lakehal, Abdelaziz; Khelil, Khaled; Dedry, Olivier; Hashemi, Neda; Boudebane, Said
       title: DRY SLIDING FRICTION AND WEAR OF THE WC/TIC-CO IN CONTACT WITH AL2O3 FOR TWO SLIDING SPEEDS
        date: 2022
       words: 5628
      flesch: 58
     summary: Also, the additions of TiC in the mixture of Co WC powders are justified by a better hot stability of titanium carbide compared to tungsten carbide. On the other hand, tungsten may produce volatile oxides which then accelerate the degradation of the surface of the material subjected to high temperature wear.
    keywords: cermets; fig; friction; grade; m/s; sliding; speeds; temperature; tic; wear
       cache: fumecheng-6053.pdf
  plain text: fumecheng-6053.txt

        item: #386 of 526
          id: fumecheng-6066
      author: Ambhore, Nitin; Kamble, Dinesh
       title: EXPERIMENTAL INVESTIGATION OF TOOL WEAR AND INDUCED VIBRATION IN TURNING HIGH HARDNESS AISI52100 STEEL USING CUTTING PARAMETERS AND TOOL ACCELERATION
        date: 2020
       words: 4652
      flesch: 56
     summary: Several research studies presented diverse mathematical/statistical predictive models for cutting force, surface roughness, tool vibrations, and tool wear , etc. Therefore, the effect of cutting tool vibrations during the machining process must be studied.
    keywords: acceleration; cutting; feed; fig; model; tool; turning; vibration; wear
       cache: fumecheng-6066.pdf
  plain text: fumecheng-6066.txt

        item: #387 of 526
          id: fumecheng-6106
      author: Milovanović, Jelena; Stojković, Miloš; Trifunović, Milan; Vitković, Nikola
       title: REVIEW OF BONE SCAFFOLD DESIGN CONCEPTS AND DESIGN METHODS
        date: 2023
       words: 9548
      flesch: 47
     summary: In the last ten years, with the significant increase of the computer capabilities, and the emerging new algorithms for the so-called topological shape optimization [43, 44, 45, 46], 3D modeling of bone tissue scaffolds becomes an ideal field for applying topological optimization of scaffold architecture in order to provide the desired characteristics regarding the expected mechanical stresses and deformations. Having in mind the primary function of bone scaffold to reinforce the proto- bone tissue during the recovery, scaffold geometry (i.e. lattice structure of the scaffold) should match the required anisotropy of the mechanical properties.
    keywords: architecture; bone; bone scaffold; bone tissue; cells; design; engineering; fig; geometry; lattice; scaffold; scaffold design; structure; tissue; unit
       cache: fumecheng-6106.pdf
  plain text: fumecheng-6106.txt

        item: #388 of 526
          id: fumecheng-6108
      author: Rysaeva, Leysan Kh.; Korznikova, Elena A.; Murzaev, Ramil T.; Abdullina, Dina U.; Kudreyko, Aleksey A.; Baimova, Julia A.; Lisovenko, Dmitry S.; Dmitriev, Sergey V.
       title: ELASTIC DAMPER BASED ON THE CARBON NANOTUBE BUNDLE
        date: 2020
       words: 5391
      flesch: 68
     summary: Korznikova, E.A., Rysaeva, L.K., Savin, A.V., Soboleva, E.G., Ekomasov, E.G., Ilgamov, M.A., Dmitriev, S.V., 2019, Chain model for carbon nanotube bundle under plane strain conditions, Materials, 12(23), 3951. 62. Firstly, period doubling is observed as a result of the second order phase transition, and at higher compressive strain, the first order phase transition takes place when carbon nanotubes start to collapse.
    keywords: axis; bundle; carbon; cnt; cnts; compression; e.a; fig; korznikova; loading; nanotube; phys; properties; strain
       cache: fumecheng-6108.pdf
  plain text: fumecheng-6108.txt

        item: #389 of 526
          id: fumecheng-6110
      author: Mijajlović, Miroslav; Vidojković, Sonja; Ćirić, Dušan; Marinković, Dragan
       title: NUMERICAL SIMULATION OF FLUID-STRUCTURE INTERACTION BETWEEN FISHING WOBBLER AND WATER
        date: 2020
       words: 3946
      flesch: 59
     summary: The solid continuum is firstly simplified: the slim bodies (fishing line, treble hooks, rings, swivel) are modeled as 1D elements, while the massive bodies (wobbler and steel ball) are modeled as 3D elements. The baits from this group are known as wobblers or crankbait [2].
    keywords: fig; fishing; fluid; interaction; line; model; numerical; water; wobbler
       cache: fumecheng-6110.pdf
  plain text: fumecheng-6110.txt

        item: #390 of 526
          id: fumecheng-6112
      author: Lyashenko, Iakov A.; Borysiuk, Vadym N.; Popov, Valentin L.
       title: DYNAMICAL MODEL OF THE ASYMMETRIC ACTUATOR OF DIRECTIONAL MOTION BASED ON POWER-LAW GRADED MATERIALS
        date: 2020
       words: 4465
      flesch: 57
     summary: There are several methods of obtaining of graded materials. Another aim of our study is to check if the use of graded materials as contacting parts of the device can lead to any improvement or alternative behavior of the investigated system.
    keywords: indenter; materials; slider
       cache: fumecheng-6112.pdf
  plain text: fumecheng-6112.txt

        item: #391 of 526
          id: fumecheng-6137
      author: Hassanpour, Malek
       title: EVALUATION OF IRANIAN SMALL AND MEDIUM-SIZED INDUSTRIES USING THE DEA BASED ON ADDITIVE RATIO MODEL – A REVIEW
        date: 2020
       words: 9234
      flesch: 49
     summary: IRANIAN INDUSTRIES By the present review, 9 groups (including 405 industries) of Iranian industries passed through the DEA-ARAS model to classify the industries based on materials and energy streams such as Iranian Wood and Cellulose Industries (IWCI; 16 various types), Iranian Textile and Leather Industries (ITLI; 38 various types), Iranian Mining and Aggregate Industries (IMAI; 26 various types), Iranian Food Industries (IFI; 57 various types), Iranian Automotive Industries (IAI; 71 various types), Iranian Plastic Industries (IPI; 21 various types), Iranian Electronic Products Manufacturing Industries (IEPMI; 33 various types), Iranian Chemical Industries (ICI; 118 various types) and Iranian Household Appliance Industries (IHAI; 25 various types). A study examined the efficiency evaluation using DEA model supplemented by AHP about inputs and outputs criteria such as distance from Co2 source, minimum flow rate requirement (input), injectivity limit, operating life, product yield, product value, sequestration parameter, reservoir capacity, well security and structural integrity (outputs)
    keywords: analysis; criteria; data; dea; dea model; efficiency; envelopment; evaluation; industries; inputs; iranian; journal; method; model; outputs; performance; research; values
       cache: fumecheng-6137.pdf
  plain text: fumecheng-6137.txt

        item: #392 of 526
          id: fumecheng-6156
      author: Kumar, Vidyapati; Diyaley, Sunny; Chakraborty, Shankar
       title: TEACHING-LEARNING-BASED PARAMETRIC OPTIMIZATION OF AN ELECTRICAL DISCHARGE MACHINING PROCESS
        date: 2020
       words: 7464
      flesch: 53
     summary: 6 Effects of EDM process parameters on MRR 294 V. KUMAR, S. DIYALEY, S. CHAKRABORTY Ramprabhu, T., Savsani, V., Parsana, S., Radadia, N., Sheth, M., Sheth, N., 2018,Multi-objective optimization of EDM process parameters by using passing vehicle search (PVS) algorithm, Defect and Diffusion Forum, 382, pp.
    keywords: algorithm; current; discharge; edm; edm process; machining; mrr; optimization; parameters; process; process parameters; time; tlbo; tool
       cache: fumecheng-6156.pdf
  plain text: fumecheng-6156.txt

        item: #393 of 526
          id: fumecheng-6157
      author: Mitrović, Dejan; Ignjatović, Marko; Stojanović, Branislav; Janevski, Jelena; Škundrić, Jovan
       title: ENERGY ANALYSIS OF REPOWERING STEAM POWER PLANTS BY FEED WATER HEATING
        date: 2022
       words: 6424
      flesch: 52
     summary: REPOWERING OPTIONS OF STEAM POWER PLANTS In the Republic of Serbia, electricity is dominantly (to a larger extent compared to other sources) produced in steam power plants, most of which have already surpassed their initial operation lifetime. Hosseinalipour, S.M., Mehrpanahi, A., 2009, Economical analysis of repowering steam power plants in comparison to constructing gas power plants, 7th national congress of energy, Iranian.
    keywords: efficiency; energy; gas; gas turbine; heat; plant; power; production; repowering; steam; steam power; temperature; turbine
       cache: fumecheng-6157.pdf
  plain text: fumecheng-6157.txt

        item: #394 of 526
          id: fumecheng-6187
      author: Krasuski, Kamil; Ciećko, Adam; Grunwald, Grzegorz; Wierzbicki, Damian
       title: ASSESSMENT OF VELOCITY ACCURACY OF AIRCRAFT IN THE DYNAMIC TESTS USING GNSS SENSORS
        date: 2020
       words: 4700
      flesch: 58
     summary: 7 shows aircraft flight speed errors calculated as the difference between the weighted average speed and parameter. [18] showed the results of aircraft flight speed tests based on a solution from a GPS sensor and an INS sensor, while the flight speed readings of the aircraft from the GPS sensor and Pitot tubes were published and compared by the Foster et al.
    keywords: aircraft; flight; flight speed; gnss; gps; solution; speed; velocity
       cache: fumecheng-6187.pdf
  plain text: fumecheng-6187.txt

        item: #395 of 526
          id: fumecheng-619
      author: Petković, Dušan; Madić, Miloš; Radovanović, Miroslav; Gečevska, Valentina
       title: APPLICATION OF THE PERFORMANCE SELECTION INDEX METHOD FOR SOLVING MACHINING MCDM PROBLEMS
        date: 2017
       words: 4007
      flesch: 45
     summary: In open literature, solving machining MCDM problems using MCDM methods is mainly related to machinability of materials and selection of cutting fluids Past research investigated the applicability of a number of MCDM methods including graph theory and matrix approach (GTMA), technique for order preference by similarity to ideal solution (TOPSIS), weighted aggregated sum product assessment (WASPAS), and preference ranking organization method for enrichment evaluation (PROMETHEE).
    keywords: case; criteria; cutting; machining; method; problems; psi; selection
       cache: fumecheng-619.pdf
  plain text: fumecheng-619.txt

        item: #396 of 526
          id: fumecheng-6195
      author: Ali, Yousaf; Mehmood, Bilal; Huzaifa, Muhammad; Yasir, Umair; Khan, Amin Ullah
       title: DEVELOPMENT OF A NEW HYBRID MULTI CRITERIA DECISION-MAKING METHOD FOR A CAR SELECTION SCENARIO
        date: 2020
       words: 8385
      flesch: 56
     summary: 366 Y. ALI, B. MEHMOOD, M. HUZAIFA, U. YASIR, A. U. KHAN Table 5 Showing the importance weights and ratings for Fuzzy TOPSIS method Linguistic Variables Importance Weights Importance Ratings Low (0,0.1,0.3) (0,0,0.25) Medium (0.3,0.5,0.7) (0,0.25,0.5) Medium High (0.5,0.7,0.9) (0.25,0.5,0.75) High (0.7,0.9,1.0) (0.5,0.75,1.0) Very High (0.9,1.0,1.0) (0.75,1.0,1.0) FCF-TOPSIS Model This model will be a unique combination of FUCOM and Fuzzy TOPSIS techniques.
    keywords: ahp; car; criteria; decision; making; mcdm; method; results; selection; technique; topsis; weights
       cache: fumecheng-6195.pdf
  plain text: fumecheng-6195.txt

        item: #397 of 526
          id: fumecheng-6196
      author: Pająk, Michał
       title: FUZZY MODEL OF THE OPERATIONAL POTENTIAL CONSUMPTION PROCESS OF A COMPLEX TECHNICAL SYSTEM
        date: 2020
       words: 9063
      flesch: 54
     summary: In Chapter 2 the main idea of fuzzy model application is presented. where: FMRi - i-th inference rule of the fuzzy model, AGR(FMRi) - the value after premises aggregation of i-th inference rule, yi(iout) - the value of the membership function of the linguistic value on position iout for fuzzy value of the output parameter of i-th rule, nvl - the amount of the linguistic values defined for the parameters of the model.
    keywords: change; consumption; deviation; features; input; model; operation; output; parameter; potential; process; state; system; time; value; working
       cache: fumecheng-6196.pdf
  plain text: fumecheng-6196.txt

        item: #398 of 526
          id: fumecheng-6205
      author: Ramakrishnan, Krishnapuram Ravi; Chakraborty, Shankar
       title: A CLOUD TOPSIS MODEL FOR GREEN SUPPLIER SELECTION
        date: 2020
       words: 10596
      flesch: 51
     summary: S1 G VG G VG 0.8455 0.0378 0.0108 S2 F G G G 0.6432 0.0356 0.0074 S3 G VG VG G 0.8455 0.0265 0.0108 S4 G VG G VG 0.8455 0.0265 0.0108 S5 VG VG VG VG 1 0.0265 0.0130 C23 S1 G G G G 0.6910 0.0429 0.0080 S2 G G G G 0.6910 0.0265 0.0080 S3 G G G G 0.6910 0.0232 0.0080 S4 VG G G VG 0.8455 0.0356 0.0108 S5 VG VG VG VG 1 0.0410 0.0130 C32 (+) S1 VP P P VP 0.1545 0.0356 0.0108 S2 P F P F 0.4045 0.0233 0.0067 S3 F F F G 0.5477 0.0265 0.0059 S4 G VG G F 0.7205 0.0410 0.0090 S5 VG VG G F 0.7977 0.0356 0.0103 C33 (+) S1 F G VG G 0.7205 0.0233 0.0090 S2 G F F F 0.5477 0.0265 0.0059 S3 P F P F 0.4045 0.0410 0.0067 S4 F G VG VG 0.7977 0.0356 0.0103 S5 G F VG G 0.7205 0.0410 0.0089 C34 (+)
    keywords: cloud; criteria; f f; g f; g g; g p; g vg; green; s1 g; s2 g; s3 g; s4 g; s4 vg; s5 g; selection; supplier; vg f
       cache: fumecheng-6205.pdf
  plain text: fumecheng-6205.txt

        item: #399 of 526
          id: fumecheng-624
      author: Razi, Hajar; Birkhold, Annette I; Zehn, Manfred; Duda, Georg N; Willie, Bettina M; Checa, Sara
       title: A FINITE ELEMENT MODEL OF IN VIVO MOUSE TIBIAL COMPRESSION LOADING: INFLUENCE OF BOUNDARY CONDITIONS
        date: 2014
       words: 5603
      flesch: 50
     summary: So far, the direct link between in vivo bone loading, tissue adaptation and local mechanical strain stimulus remains unclear. A major reason is the lack of knowledge on the local mechanical strain and how it depends upon the local in vivo bone loading.
    keywords: bone; boundary; compression; conditions; contact; fig; knee; loading; model; mouse; mouse tibia; strains; surfaces; tibia; vivo
       cache: fumecheng-624.pdf
  plain text: fumecheng-624.txt

        item: #400 of 526
          id: fumecheng-6277
      author: Đalić, Irena; Ateljević, Jovo; Stević, Željko; Terzić, Svetlana
       title: AN INTEGRATED SWOT – FUZZY PIPRECIA MODEL FOR ANALYSIS OF COMPETITIVENESS IN ORDER TO IMPROVE LOGISTICS PERFORMANCES
        date: 2020
       words: 6127
      flesch: 62
     summary: From these reasons, in this research it was conducted SWOT analysis of specific company, and after that the elements of the SWOT matrix were ranked using fuzzy PIPRECIA method. The most often used method of analyzing the state of the company is SWOT analysis, which can be seen from the numerous literature that deals with this topic.
    keywords: analysis; company; criteria; management; method; piprecia; swot; swot analysis
       cache: fumecheng-6277.pdf
  plain text: fumecheng-6277.txt

        item: #401 of 526
          id: fumecheng-6290
      author: Singh, Ankit; Ghadai, Ranjan Kumar; Kalita, Kanak; Chatterjee, Prasenjit; Pamučar, Dragan
       title: EDM PROCESS PARAMETER OPTIMIZATION FOR EFFICIENT MACHINING OF INCONEL-718
        date: 2020
       words: 5952
      flesch: 55
     summary: Effect of process parameters on MRR The main effect plot of MRR for various process parameters is shown in Fig. Effect of process parameters on TWR The main effect plot of TWR for various process parameters is shown in Fig.
    keywords: current; decision; edm; machining; mrr; optimization; parameters; process; topsis; twr; weight
       cache: fumecheng-6290.pdf
  plain text: fumecheng-6290.txt

        item: #402 of 526
          id: fumecheng-6292
      author: Madić, Miloš; Gostimirović, Marin; Rodić, Dragan; Radovanović, Miroslav; Coteaţă, Margareta
       title: MATHEMATICAL MODELLING OF THE CO2 LASER CUTTING PROCESS USING GENETIC PROGRAMMING
        date: 2022
       words: 5843
      flesch: 45
     summary: Ozaki, H., Koike, Y., Kawakami, H., Suzuki, J., 2012, Cutting properties of austenitic stainless steel by using laser cutting process without assist gas, Advances in Optical Technologies, 2012, 234321. Abhimanyu, N., Satyanarayana, B., 2016, Optimization of CNC laser cutting process parameters, International Advanced Research Journal in Science, Engineering and Technology, 3(5), pp. 206-210.
    keywords: cutting; kerf; laser; laser cutting; mathematical; model; parameters; power; process; speed; taper
       cache: fumecheng-6292.pdf
  plain text: fumecheng-6292.txt

        item: #403 of 526
          id: fumecheng-6298
      author: Ryba, Tomasz; Rucki, Miroslaw; Siemiatkowski, Zbigniew; Bzinkowski, Damian; Solecki, Michal
       title: DESIGN AND CALIBRATION OF THE SYSTEM SUPERVISING BELT TENSION AND WEAR IN AN INDUSTRIAL FEEDER
        date: 2022
       words: 3179
      flesch: 54
     summary: The designed system is based on strain gauges that are built into the roller and are subject to the belt pressure at each revolution. Application of strain gauges directly on the roller made it possible to obtain data concerning the belt conditions during its work.
    keywords: belt; calibration; fig; gauge; measurement; strain; system; tension; uncertainty
       cache: fumecheng-6298.pdf
  plain text: fumecheng-6298.txt

        item: #404 of 526
          id: fumecheng-6347
      author: Brlić, Tin; Rešković, Stoja; Jurković, Zoran; Janeš, Gordan
       title: MATHEMATICAL MODELING OF THE INFLUENCE PARAMETERS DURING FORMATION AND PROPAGATION OF THE LÜDERS BANDS
        date: 2020
       words: 6636
      flesch: 41
     summary: A higher stress amount indicates a more pronounced surface roughness in this area during Lüders band propagation which is a significant problem during forming of microalloyed steels. Values of temperature changes and their distribution in Lüders bands can be determined with high accuracy using thermography.
    keywords: formation; lüders; lüders bands; models; parameters; propagation; ɛmax; δtmax
       cache: fumecheng-6347.pdf
  plain text: fumecheng-6347.txt

        item: #405 of 526
          id: fumecheng-6362
      author: Tomków, Jacek; Sobota, Konrad; Krajewski, Sławomir
       title: INFLUENCE OF TACK WELDS DISTRIBUTION AND WELDING SEQUENCE ON THE ANGULAR DISTORTION OF TIG WELDED JOINT
        date: 2020
       words: 4555
      flesch: 60
     summary: [37] put forward the thesis that weld distortion is not always precisely evaluated by the weld heat input. In the case of steel welding, some typical imperfections could be observed.
    keywords: current; distortion; group; materials; steel; tack; tig; values; welding; welds
       cache: fumecheng-6362.pdf
  plain text: fumecheng-6362.txt

        item: #406 of 526
          id: fumecheng-6366
      author: Precup, Radu-Emil; Preitl, Stefan; Petriu, Emil M.; Roman, Raul-Cristian; Bojan-Dragos, Claudia-Adina; Hedrea, Elena-Lorena; Szedlak-Stinean, Alexandra-Iulia
       title: A CENTER MANIFOLD THEORY-BASED APPROACH TO THE STABILITY ANALYSIS OF STATE FEEDBACK TAKAGI-SUGENO-KANG FUZZY CONTROL SYSTEMS
        date: 2020
       words: 7813
      flesch: 55
     summary: [27], that the classical approach based on PDC to stabilize fuzzy control systems and the use LMIs in the stability analysis may introduce computational burden, complexity and coupling of subsystems. Tanaka, K., Sugeno, M., 1992, Stability analysis and design of fuzzy control systems, Fuzzy Sets and Systems, 45(2), pp. 135-156. 2.
    keywords: analysis; approach; control; control systems; controllers; data; design; feedback; fuzzy; ieee; model; precup; preitl; r.-e; stability; state; systems
       cache: fumecheng-6366.pdf
  plain text: fumecheng-6366.txt

        item: #407 of 526
          id: fumecheng-6396
      author: Zdravković, Milan; Korunović, Nikola
       title: NOVEL METHODOLOGY FOR REAL-TIME STRUCTURAL ANALYSIS ASSISTANCE IN CUSTOM PRODUCT DESIGN
        date: 2023
       words: 5679
      flesch: 45
     summary: Concept of using compiled FEA models for real-time assistance in product design and validation The compiled FEA model is based on the physical quantities and properties (for example, level of mechanical stresses in critical product areas, product mass and the like) of the number of “characteristic” data instances. 5. Ghoreishi, M., Happonen, A., 2020, New promises AI brings into circular economy accelerated product design: a review on supporting literature, E3S Web Conf., 158, 06002.
    keywords: analysis; data; dataset; design; fea; features; model; parameters; product; properties; quantities; time
       cache: fumecheng-6396.pdf
  plain text: fumecheng-6396.txt

        item: #408 of 526
          id: fumecheng-64
      author: Bogdanović-Jovanović, Jasmina; Bogdanović, Božidar; Božić, Ivan
       title: DESIGN OF SMALL BULB TURBINES WITH UNEQUAL SPECIFIC WORK DISTRIBUTION OF THE RUNNER’S ELEMENTARY STAGES
        date: 2014
       words: 5343
      flesch: 67
     summary: For the fluid flow on cylindrical surfaces (cr = 0, o oc u zu zc c  ) in control cross-sections in front of and behind the turbine runner (where / 0   ), according to the component of vector Eq. (9) in the direction of coordinate r, a differential equation is obtained: ( ) 1u u tz z c rc pc c r r r r         , (10) which defines the condition for cylindrical flow surfaces in control cross-sections 1-1 and 2-2. ( ), for z i z z e c r r r r r r r c const c r r r r                     (20) where the coefficients are: 0 2 1 3 4 h B r B          , 2 1 4 h B B          , 2 0 2 2 4 A r B B    and 0 2 4r AB    (21) Integral of the first Eq. (20), for ri  r  ro, becomes: 2 2 2 1 1 1 1 1 ( ) ( ( )) ( ) ( ) ln 2 o z z o o o o r c r c r r r r r r r r                  .
    keywords: flow; r r; runner; surfaces; turbine; work
       cache: fumecheng-64.pdf
  plain text: fumecheng-64.txt

        item: #409 of 526
          id: fumecheng-6404
      author: Zachariah, Sojan Andrews; Shenoy, Satish; Pai, Dayananda
       title: EXPERIMENTAL ANALYSIS OF THE EFFECT OF THE WOVEN ARAMID FABRIC ON THE STRAIN TO FAILURE BEHAVIOR OF PLAIN WEAVED CARBON/ARAMID HYBRID LAMINATES
        date: 2024
       words: 4911
      flesch: 55
     summary: Saka, K., Harding, J., 1990, A simple laminate theory approach to the prediction of the tensile impact strength of woven hybrid composites, Composites 21(5),pp. Key Words: Hybrid composites, Pseudo – ductility, Woven Fabric polymer composites, Ultimate strain to failure 1. INTRODUCTION Composite laminates are widely employed for various structural applications in the Engineering Sector.
    keywords: aramid; behavior; carbon; composites; failure; fiber; hybrid; properties; samples; strain; tensile; virgin
       cache: fumecheng-6404.pdf
  plain text: fumecheng-6404.txt

        item: #410 of 526
          id: fumecheng-6431
      author: Stryczek, Roman; Błaszczak, Paweł
       title: OPTIMAL FEED RATE CONTROL STRATEGIES FOR FRICTION DRILLING
        date: 2020
       words: 8337
      flesch: 63
     summary: Manufacturers of friction drilling tools provide their customers with recommended feed rates which are constant in subsequent drilling phases. Adaptive control of the friction drilling process Because it is very rare that friction drilling machine tools are equipped with a dynamometer to measure thrust and torque, the assumed strategy of adaptive feed rate control uses the load on the feed drives and the spindle as input data.
    keywords: control; cycle; drilling; drilling process; drive; energy; feed; feed rate; fig; friction; friction drilling; load; process; tool; torque
       cache: fumecheng-6431.pdf
  plain text: fumecheng-6431.txt

        item: #411 of 526
          id: fumecheng-6499
      author: Božanić, Darko; Ranđelović, Aca; Radovanović, Marko; Tešić, Duško
       title: A HYBRID LBWA - IR-MAIRCA MULTI-CRITERIA DECISION-MAKING MODEL FOR DETERMINATION OF CONSTRUCTIVE ELEMENTS OF WEAPONS
        date: 2020
       words: 8743
      flesch: 66
     summary: This is a significant characteristic of the MAIRCA method considering to a certain extent the omnipresent subjectivity of decision-makers while defining entrance parameters for weight coefficient criteria calculations. Ţiţović, M., Pamučar, D., 2019, New model for determining criteria weights: Level Based Weight Assessment (LBWA) model, Decision Making: Applications in Management and Engineering, 2(2), pp. 126-137. 12.
    keywords: alternatives; criteria; decision; irn; mairca; method; model; number; weapons; weight; y y
       cache: fumecheng-6499.pdf
  plain text: fumecheng-6499.txt

        item: #412 of 526
          id: fumecheng-6515
      author: Pamucar, Dragan; Ecer, Fatih
       title: PRIORITIZING THE WEIGHTS OF THE EVALUATION CRITERIA UNDER FUZZINESS: THE FUZZY FULL CONSISTENCY METHOD – FUCOM-F
        date: 2020
       words: 8343
      flesch: 62
     summary: Seeing their direct effect on the solution, weighting methods that most accurately determine criteria weights are needed. Criterion weights can be determined subjectively or objectively.
    keywords: criteria; cw w; k k; k w; u l; w w; w ;  
       cache: fumecheng-6515.pdf
  plain text: fumecheng-6515.txt

        item: #413 of 526
          id: fumecheng-6544
      author: Shatrov, Mikhail G.; Dunin, Andrey U.; Dushkin, Pavel V.; Yakovenko, Andrey L.; Golubkov, Leonid N.; Sinyavski, Vladimir V.
       title: INFLUENCE OF PRESSURE OSCILLATIONS IN COMMON RAIL INJECTOR ON FUEL INJECTION RATE
        date: 2020
       words: 4858
      flesch: 54
     summary: Fuel injection causes considerable oscillations of fuel pressure at the injector inlet. Fuel injection causes considerable pressure oscillations at the inlet of the injector.
    keywords: bar; control; fig; fuel; fuel injection; injection; injector; oscillations; pressure; pressure oscillations; rate
       cache: fumecheng-6544.pdf
  plain text: fumecheng-6544.txt

        item: #414 of 526
          id: fumecheng-6589
      author: Avtokratova, Elena; Sitdikov, Oleg; Latypova, Oksana; Markushev, Michael
       title: EFFECT OF THE BIMODAL STRUCTURE PROCESSED BY ECAP AND SUBSEQUENT ROLLING ON STATIC STRENGTH AND SUPERPLASTICITY OF Al-Mg-Sc-Zr ALLOY
        date: 2020
       words: 5133
      flesch: 52
     summary: Thus, new grain structures were mainly developed in all alloy states via recrystallization, occurring in the early stages of tensile deformation [23]. This may imply that the straining occurred mainly in the mantle regions by grain boundary sliding (GBS), which was attributed to the ultrafine grain size and a relatively high deformation temperature, resulting in dissipation and almost complete relaxation of the deformation energy introduced by rolling [12, 14].
    keywords: alloy; annealing; ecap; fig; grain; rolling; strain; structure
       cache: fumecheng-6589.pdf
  plain text: fumecheng-6589.txt

        item: #415 of 526
          id: fumecheng-66
      author: Vukić, Mića V.; Vučković, Goran; Živković, Predrag; Stevanović, Žarko; Tomić, Mladen
       title: 3D NUMERICAL SIMULATIONS OF THE THERMAL PROCESSES IN THE SHELL AND TUBE HEAT EXCHANGER
        date: 2014
       words: 3611
      flesch: 54
     summary: Determination of the extra source terms of the distributed resistance and volume heat transfer coefficients has been made by linearization technique of the special source terms. 4 Variation of heating fluid temperature along the STHE’s axis Fig. 4 shows the comparison between the experimental and the numerical values of the heating fluid temperature by using the local volume overall heat transfer coefficient in the shell axis for the case of three segmental baffle Np = 3, with baffle cut of BC = 22%, with leakage flow between the baffle and the shell, for the heating fluid flow rate of Vt = 3m 3 /h and initial temperature of t1t = 60°C. Fig.
    keywords: baffle; fig; flow; fluid; heat; numerical; shell; temperature; transfer; tube
       cache: fumecheng-66.pdf
  plain text: fumecheng-66.txt

        item: #416 of 526
          id: fumecheng-6600
      author: Fallahi, Nasim; Viglietti, Andrea; Carrera, Erasmo; Pagani, Alfonso; Zappino, Enrico
       title: EFFECT OF FIBER ORIENTATION PATH ON THE BUCKLING, FREE VIBRATION, AND STATIC ANALYSES OF VARIABLE ANGLE TOW PANELS
        date: 2020
       words: 8922
      flesch: 61
     summary: [29] used the finite element method to study the dynamic instability of VAT composite plates subjected to in-plane loading. This discussion indicates that although several reports exist regarding the static and dynamic analyses of VAT composite panels performed under the framework of various displacement models as well as different approximation approaches, the effect of the fiber orientation angle on the static, buckling and free-vibration response of VAT composite plates under various boundary conditions has not been extensively investigated.
    keywords: analysis; angle; buckling; composite; fiber; lay; mode; structures; variable; vat; vibration
       cache: fumecheng-6600.pdf
  plain text: fumecheng-6600.txt

        item: #417 of 526
          id: fumecheng-6613
      author: Pérez, Roberto; Hernández, Luis; Quesada, Ana; Pino, Julio; Zayas, Enrique
       title: FINITE ELEMENT MODELING OF TEMPERATURE FIELDS ON THE CUTTING EDGE IN THE DRY HIGH-SPEED TURNING OF AISI 1045 STEEL
        date: 2020
       words: 5077
      flesch: 52
     summary: The research presents the results of different cutting tools (two coated carbide tools and uncoated cermet) effects on average surface temperature fields on the cutting edge in the dry high-speed turning of AISI 1045 steel. 216 R. PÉREZ, L. HERNÁNDEZ, A. QUESADA, J. PINO, E. ZAYAS REFERENCES 1. Sulaiman, S., Roshana, A., Ariffin, M.K.A., 2013, Finite element modeling of the effect of tool rake angle on tool temperature and cutting force during high speed machining of AISI 4340 steel, Proc.
    keywords: cutting; edge; element; finite; machining; modeling; speed; steel; temperature; tool; turning
       cache: fumecheng-6613.pdf
  plain text: fumecheng-6613.txt

        item: #418 of 526
          id: fumecheng-6615
      author: Randjbaran, Elias; Majid, Dayang L.; Zahari, Rizal; Sultan, Mohamed T. H.; Mazlan, Norkhairunnisa
       title: EFFECTS OF VOLUME OF CARBON NANOTUBES ON THE ANGLED BALLISTIC IMPACT FOR CARBON KEVLAR HYBRID FABRICS
        date: 2020
       words: 6614
      flesch: 52
     summary: The solution is based on the target material properties at high ballistic impact resistance, the inclined impact and the CNT volumes. Rastogi, S., Verma, A., Singh, V.K., 2020, Experimental response of nonwoven waste cellulose fabric– reinforced epoxy composites for high toughness and coating applications, Materials Performance and Characterization, 9(1), pp. 151-172. 31.
    keywords: bird; carbon; cnt; cnts; composites; degrees; energy; epoxy; fiber; fig; hybrid; impact; journal; kevlar; limit; nanotubes; thickness
       cache: fumecheng-6615.pdf
  plain text: fumecheng-6615.txt

        item: #419 of 526
          id: fumecheng-6642
      author: Ton-That, Hoang Lan
       title: A NEW C0 THIRD-ORDER SHEAR DEFORMATION THEORY FOR THE NONLINEAR FREE VIBRATION ANALYSIS OF STIFFENED FUNCTIONALLY GRADED PLATES
        date: 2021
       words: 7487
      flesch: 71
     summary: Liew, K.M., Xiang, Y., Kitipornchai, S., Meek, J.L., 1995, Formulation of Mindlin-Engesser model for stiffened plate vibration, Computer Methods in Applied Mechanics and Engineering, 120(3), pp. 339-353. Chattopadhyay et al. as well as Holopainen [29, 30] analyzed nonlinear static of composite stiffened plates based on the first order shear deformation theory and the FEM method or used a new finite model for a linear free vibration analysis of stiffened plates, which is based on the nine-node quadrilateral element related to mixed interpolation of tensorial components.
    keywords: h =; y y; y z; z z;  
       cache: fumecheng-6642.pdf
  plain text: fumecheng-6642.txt

        item: #420 of 526
          id: fumecheng-6657
      author: Cwiklak, Janusz
       title: INFLUENCE OF A BIRD MODEL SHAPE ON THE BIRD IMPACT PARAMETERS
        date: 2020
       words: 4918
      flesch: 57
     summary: The existing research concerning bird models of a complex shape mostly analyzed events, in which the bird mass was from 0.3 kg to 3.6 kg [5, 8, 10]. The analysis time was taken to be from 10 to 20 ms depending from a kind of bird model.
    keywords: bird; bird model; fig; impact; material; model; parameters; shape; stork; velocity; windshield
       cache: fumecheng-6657.pdf
  plain text: fumecheng-6657.txt

        item: #421 of 526
          id: fumecheng-677
      author: Filippov, Alexander E.; Gorb, Stanislav N.; Popov, Valentin L.
       title: WHAT CAN WE LEARN FROM THE “WATER BEARS” FOR THE ADHESION SYSTEMS USING IN SPACE APPLICATIONS?
        date: 2015
       words: 3397
      flesch: 55
     summary: Even if we do not exactly know the materials composition of tardigrade adhesive pads, it is plausible to assume that after complete rehydration at space conditions, this biological material or material composition will be able to recover its adhesive properties after rehydration, due to the material softening after water absorption. The 'leaf' is very elastic and thin and conceptually it resembles terminal spatula of other adhesive systems of insects, spiders, and Geckos
    keywords: adhesion; adhesive; conditions; gecko; gorb; space; systems; tardigrades; water
       cache: fumecheng-677.pdf
  plain text: fumecheng-677.txt

        item: #422 of 526
          id: fumecheng-685
      author: Milovanović, Jelena; Stojković, Miloš; Trajanović, Miroslav
       title: APPLICABILITY ANALYSIS OF ADDITIVE MANUFACTURING PROCESSES IN THE FABRICATION OF ANATOMICALLY SHAPED LATTICE SCAFFOLDS
        date: 2015
       words: 3625
      flesch: 38
     summary: Moreover, this criterial matrix serves as the basis for developing Calculator for the generic assessment of additive manufacturing processes applicability. Definitions of variables that are chosen as relevant for AMP applicability assessment in the case of ASLS design are listed below: 
    keywords: additive; amp; applicability; asls; case; manufacturing; processes; variables
       cache: fumecheng-685.pdf
  plain text: fumecheng-685.txt

        item: #423 of 526
          id: fumecheng-6852
      author: Kozakiewicz, Bartłomiej; Winiarski, Tomasz
       title: SPRING BASED ON FLAT PERMANENT MAGNETS: DESIGN, ANALYSIS AND USE IN VARIABLE STIFFNESS ACTUATOR
        date: 2023
       words: 7633
      flesch: 56
     summary: SIMULATION There were three main goals of FEM analyses performed on magnetic spring models: verifying a choice of materials presented in Section 4, investigating an impact of magnets number, shape and arrangement on spring torque-angle characteristics and optimizing dimensions of spring used in experiments. A summary of previous achievements in constructing magnetic springs is presented in Section 2.
    keywords: angle; characteristics; control; design; fig; magnets; output; section; shaft; spring; stiffness; torque
       cache: fumecheng-6852.pdf
  plain text: fumecheng-6852.txt

        item: #424 of 526
          id: fumecheng-6855
      author: Vosniakos, George-Christopher; Pipinis, Gabriel; Kostazos, Protesilaos
       title: NUMERICAL SIMULATION OF SINGLE POINT INCREMENTAL FORMING FOR ASYMMETRIC PARTS
        date: 2021
       words: 5498
      flesch: 55
     summary: Dejardin, S., Thibaud, S., Gelin, J.C., Michel, G., 2010, Experimental investigations and numerical analysis for improving knowledge of incremental sheet forming process for sheet metal parts, Journal of Materials Processing Technology, 210(2), pp. Blaga, A., Bologa, O., Oleksik, V., Breaz, R. 2011, Influence of tool path on main strains, thickness reduction and forces in single point incremental forming process, Proceedings in Manufacturing Systems , 6(4), pp. 2-7. 12.
    keywords: contact; fig; forming; parts; point; process; sheet; simulation; spif; tool; toolpath
       cache: fumecheng-6855.pdf
  plain text: fumecheng-6855.txt

        item: #425 of 526
          id: fumecheng-6926
      author: Al-Rabeeah, Asaad Yasseen; Seres, István; Farkas, István
       title: RECENT IMPROVEMENTS OF THE OPTICAL AND THERMAL PERFORMANCE OF THE PARABOLIC TROUGH SOLAR COLLECTOR SYSTEMS
        date: 2022
       words: 10348
      flesch: 52
     summary: Jebasingh, V.K., Herbert, G.J., 2016, A review of solar parabolic trough collector, Renewable and Sustainable Energy Reviews, 54, pp. Olia, H., Torabi, M., Bahiraei, M., Ahmadi, M.H., Goodarzi, M., Safaei, M.R., 2019, Application of nanofluids in thermal performance enhancement of parabolic trough solar collector: state-of-the- art, Applied Sciences, 9(3), 463. 10.
    keywords: absorber; analysis; collector; conductivity; efficiency; energy; fluid; heat; heat transfer; nanofluids; parabolic; performance; ptscs; receiver; solar; temperature; thermal; transfer; trough; tube; water
       cache: fumecheng-6926.pdf
  plain text: fumecheng-6926.txt

        item: #426 of 526
          id: fumecheng-6927
      author: Forstenhäusler, Maximilian; López-Guerra, Enrique A.; Solares, Santiago D.
       title: GUIDELINES TO SIMULATE LINEAR VISCOELASTIC MATERIALS WITH AN ARBITRARY NUMBER OF CHARACTERISTIC TIMES IN THE CONTEXT OF ATOMIC FORCE MISCROSCOPY
        date: 2021
       words: 9331
      flesch: 54
     summary: As the cantilever approaches the sample, this variable will become negative, indicating that tip- sample contact has been established and that viscoelastic forces can now be calculated using Eq. Note that �̅�(𝑠) and �̅�(𝑠) are now simply polynomials in the complex variable ‘s’.
    keywords: afm; force; maxwell; model; sample; step; surface; time; tip; viscoelastic; ̇ �; � ̇
       cache: fumecheng-6927.pdf
  plain text: fumecheng-6927.txt

        item: #427 of 526
          id: fumecheng-6941
      author: Haque, Rafiqul; Sekh, Mukandar; Kibria, Golam; Haidar, Shamim
       title: IMPROVEMENT OF SURFACE QUALITY OF Ti-6Al-4V ALLOY BY POWDER MIXED ELECTRICAL DISCHARGE MACHINING USING COPPER POWDER
        date: 2023
       words: 6456
      flesch: 59
     summary: (e) The optimal value of machining process parameters of peak current (Ip), pulse on time (Ton), pulse off time (Toff) and powder concentration (Cp) are 7 A, 10 µs, 30 µs and 4 g/l, respectively, for this copper powder mixed electrical discharge machining process. The EDM process improvement may be further enhanced by incorporating the convenient modifications like mixing the electrically conductive powder materials in the dielectric fluid medium which is called powder mixed EDM (PMEDM).
    keywords: alloy; grey; machining; material; mrr; parameters; pmedm; powder; process; surface; time; twr
       cache: fumecheng-6941.pdf
  plain text: fumecheng-6941.txt

        item: #428 of 526
          id: fumecheng-7012
      author: Sae-Long, Worathep; Limkatanyu, Suchart; Sukontasukkul, Piti; Damrongwiriyanupap, Nattapong; Rungamornrat, Jaroon; Prachasaree, Woraphot
       title: FOURTH-ORDER STRAIN GRADIENT BAR-SUBSTRATE MODEL WITH NONLOCAL AND SURFACE EFFECTS FOR THE ANALYSIS OF NANOWIRES EMBEDDED IN SUBSTRATE MEDIA
        date: 2021
       words: 11287
      flesch: 60
     summary: It can see in Fig. 6 that the axial strain of the bar-substrate system distinctly differs between the local model and a set of nonlocal strain gradient models, especially at the end of the nanowire under tensile load. 6 Nanowire axial strain versus distance along the nanowire -10 0 10 20 30 40 50 60 70 80 0 200 400 600 800 1000 N a n o w ir e a x ia l d is p la ce m en t (n m ) Distance along the nanowire (nm) Proposed bar model with surface effect Proposed bar model without surface effect Second order strain gradient nonlocal bar model with surface effect Second order strain gradient nonlocal bar model without surface effect Local bar model with surface effect Local bar model without surface effect -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0
    keywords: effect; gradient; gradient model; model; n x; nanowire; order; strain; strain gradient; substrate; surface; u x
       cache: fumecheng-7012.pdf
  plain text: fumecheng-7012.txt

        item: #429 of 526
          id: fumecheng-7021
      author: Li, Qiang
       title: SIMULATION OF A SINGLE THIRD-BODY PARTICLE IN FRICTIONAL CONTACT
        date: 2020
       words: 3485
      flesch: 65
     summary: In more detail, the simulation of particle contact is the following. We studied a simple case of third body particle: a single deformable particle is compressed by two parallel plates.
    keywords: body; contact; friction; particle; state
       cache: fumecheng-7021.pdf
  plain text: fumecheng-7021.txt

        item: #430 of 526
          id: fumecheng-7066
      author: Rysaeva, Leysan Kh.; Bachurin, Dmitry V.; Murzaev, Ramil T.; Abdullina, Dina U.; Korznikova, Elena A.; Mulyukov, Radik R.; Dmitriev, Sergey V.
       title: EVOLUTION OF THE CARBON NANOTUBE BUNDLE STRUCTURE UNDER BIAXIAL AND SHEAR STRAINS
        date: 2020
       words: 5252
      flesch: 62
     summary: A new mechanism of carbon nanotube bundle shear deformation through cooperative, vortex-like displacements of nanotube cross sections is reported. Korznikova, E.A., Rysaeva, L.K., Savin, A.V., Soboleva, E.G., Ekomasov, E.G., Ilgamov, M.A., Dmitriev, S.V., 2019, Chain model for carbon nanotube bundle under plane strain conditions, Materials, 12(23), 3951. 54.
    keywords: biaxial; bundle; carbon; cnt; cnts; compression; deformation; energy; fig; nanotube; shear; strain
       cache: fumecheng-7066.pdf
  plain text: fumecheng-7066.txt

        item: #431 of 526
          id: fumecheng-7076
      author: Hasan, Mohammad Sanjeed; Chanda, Ratan Kumar; Mondal, Rabindra Nath; Lorenzini, Giulio
       title: EFFECTS OF ROTATION ON UNSTEADY FLUID FLOW AND FORCED CONVECTION IN THE ROTATING CURVED SQUARE DUCT WITH A SMALL CURVATURE
        date: 2022
       words: 9190
      flesch: 65
     summary: Mondal, R.N., Islam, M.S., Uddin, K., Hossain, M.A., 2013, Effects of aspect ratio on unsteady solutions through curved duct flow, Applied Mathematics and Mechanics, 34(9), pp. The values of Q and w (0, 0) for various M and N at Dn = 1000, Gr = 100, Tr = 500 (positive rotation) and Tr = -500 (negative rotation) and δ = 0.015 M N Q w (0,0) P o si ti v e R o ta ti o n 16 16 291.1740208493 382.6415407505 18 18 291.4440637777 378.9279648439 20 20 291.5043954187 378.2773776991 22 22 291.5491957619 379.0478252693 24 24 291.5511087350 379.0911636619 N eg at iv e R o ta ti o n 16 16 322.2820420248 381.0710697212 18 18 322.2817278220 381.0904822522 20 20 322.2795158289 381.3121404054 22 22 322.2790330741 381.4151170197 24 24 322.2787357133 381.5126278631 Here, grid efficiency is carried out for truncation numbers M and N. As the research deals with square duct flow, so M and N are considered as equal.
    keywords: duct; fig; flow; fluid; heat; rotation; square; transfer; velocity
       cache: fumecheng-7076.pdf
  plain text: fumecheng-7076.txt

        item: #432 of 526
          id: fumecheng-7077
      author: Franulović, Marina; Marković, Kristina; Trajkovski, Ana
       title: CALIBRATION OF MATERIAL MODELS FOR THE HUMAN CERVICAL SPINE LIGAMENT BEHAVIOUR USING A GENETIC ALGORITHM
        date: 2021
       words: 7103
      flesch: 47
     summary: The calibration of material models was based on the genetic algorithm procedure in order to make possible optimization of material parameters identification for the chosen models. 𝜆∗ 𝜆 ≥ 𝜆∗ 4 1)2 1 3 2 1 ( 2 5 6 1 2 1 1 2 0 [ ] 1 cc c e c c c               −       = − + −         − + +             (4) 𝜎 = { 0 𝐶1 (𝜆 2 − 1 𝜆 )+𝐶3[𝑒 𝐶4(𝜆−1) − 1] 𝐶1 (𝜆 2 − 1 𝜆 ) + 𝐶5𝜆 + 𝐶6 𝜆 < 1 1 < 𝜆 < 𝜆∗ 𝜆 ≥ 𝜆∗ Values c1 to c6 represent unknown variables - material parameters which have to be identified by the numerical procedures in order to calibrate material model, σ is stress value, λ represents the current stretch value and λ* represents the stretch value on the transition point between toe and linear regions (marked as A in Fig. 1).
    keywords: algorithm; behavior; function; material; material models; models; number; parameters; population; ratio; results; value
       cache: fumecheng-7077.pdf
  plain text: fumecheng-7077.txt

        item: #433 of 526
          id: fumecheng-711
      author: Simončič, Samo; Kompolšek, Melita; Podržaj, Primož
       title: AN ADVANCED COARSE-FINE SEARCH APPROACH FOR DIGITAL IMAGE CORRELATION APPLICATIONS
        date: 2016
       words: 4714
      flesch: 56
     summary: As presented in the previous section, the proposed fine searching approach needs to be implemented by sub-pixel interpolation method which calculates intensity ),( yxg  at each sub-pixel location when that is necessary. Zhang, Z.-F., Kang, Y.-L., Wang, H.-W., Qin, Q.-H., Qiu, Y., Li, X.-Q., 2006, A novel coarse-fine search scheme for digital image correlation method, Measurement, 9(8), pp.
    keywords: approach; correlation; fine; image; pixel; point; searching; step; sub
       cache: fumecheng-711.pdf
  plain text: fumecheng-711.txt

        item: #434 of 526
          id: fumecheng-7141
      author: Gopal, Nand; Panchal, Dilbagh
       title: A STRUCTURED FRAMEWORK FOR RELIABILITY AND RISK EVALUATION IN THE MILK PROCESS INDUSTRY UNDER FUZZY ENVIRONMENT
        date: 2021
       words: 10392
      flesch: 54
     summary: Result discussion From Table 14, it has been found that with the application of FCOPRAS & FTOPSIS approaches failure causes MSCP5, MBFP3, H4, CTK4, PFM11, and CFM7 associated with different subsystem/components of the considered curd unit with outputs 100,100, 100,100,100 and 100 & 0.8336,0.9537,0.9820, 0.7179, 0.9094 and 0.9207 are prioritized as 330 N. GOPAL, D. PANCHAL most critical failure causes; responsible for decrease in system’s availability. Panchal, D., Jamwal, U., Srivastava, P., Kamboj, K., Sharma, R., 2018, Fuzzy methodology application for failure analysis of transmission system, International Journal of Mathematics in Operational Research, 12(2), pp. 220-237. 31.
    keywords: analysis; approach; causes; decision; failure; framework; fuzzy; matrix; milk; process; reliability; results; risk; set; system; table;  ;  
       cache: fumecheng-7141.pdf
  plain text: fumecheng-7141.txt

        item: #435 of 526
          id: fumecheng-7144
      author: Fazlollahtabar, Hamed; Kazemitash, Navid
       title: GREEN SUPPLIER SELECTION BASED ON THE INFORMATION SYSTEM PERFORMANCE EVALUATION USING THE INTEGRATED BEST-WORST METHOD
        date: 2021
       words: 7820
      flesch: 48
     summary: Galankashi, M.R., Chegeni, A., Soleimanynanadegany, A., Memari, A., Anjomshoae, A., Helmi, S. A., Dargi, A., 2015, Prioritizing green supplier selection criteria using fuzzy analytical network process, Procedia CIRP, 26, pp. The next step is measuring the ISs' performance in association with green supplier selection which is gained by the experts' opinions.
    keywords: criteria; decision; green; gss; information; iss; performance; perspective; selection; sub; supplier; supplier selection; weights
       cache: fumecheng-7144.pdf
  plain text: fumecheng-7144.txt

        item: #436 of 526
          id: fumecheng-7146
      author: Đalić, Irena; Stević, Željko; Ateljević, Jovo; Turskis, Zenonas; Zavadskas, Edmundas Kazimieras; Mardani, Abbas
       title: A NOVEL INTEGRATED MCDM-SWOT-TOWS MODEL FOR THE STRATEGIC DECISION ANALYSIS IN TRANSPORTATION COMPANY
        date: 2021
       words: 8851
      flesch: 59
     summary: The DMRs act in the fuzzy and dynamically changing environment 56. Analysis of SWOT of transport company helps DMRs assume that organizations achieve maximum strategic success by effectively leveraging and strengthening their strengths and opportunities in a dynamically changing business environment. Still, transport companies together have much more opportunities to act to reduce various taxes in many fields.
    keywords: analysis; business; company; criteria; decision; management; method; model; step; strategy; swot; transport
       cache: fumecheng-7146.pdf
  plain text: fumecheng-7146.txt

        item: #437 of 526
          id: fumecheng-7188
      author: Mazur, Tomasz; Rucki, Miroslaw; Gutsalenko, Yuriy
       title: ACCURACY ANALYSIS OF THE CURVED PROFILE MEASUREMENT WITH CMM: A CASE STUDY
        date: 2023
       words: 5833
      flesch: 59
     summary: Hence, it may be stated that the influence of sampling is negligibly small when estimating the measurement uncertainty of CMM measurement of the cam profile. Expanded uncertainty of form deviation measurement at the level of confidence p = 99% was U0.99 = 0.005 mm, less than 10% of the measured tolerance.
    keywords: cmm; deviation; form; measurement; profile; results; scanning; series
       cache: fumecheng-7188.pdf
  plain text: fumecheng-7188.txt

        item: #438 of 526
          id: fumecheng-7201
      author: Zuo, Yu-Ting; Liu, Hong-Jun
       title: FRACTAL APPROACH TO MECHANICAL AND ELECTRICAL PROPERTIES OF GRAPHENE/SIC COMPOSITES
        date: 2021
       words: 4204
      flesch: 64
     summary: Recently Le et al. suggested a theoretical method for graphene-reinforced composites, showing a bright light on the optimal design of SiC/ graphene composites for advanced applications [19], the fractal Telegraph equation[20], and fractal integral equations and fractal oscillators
    keywords: composites; effect; fig; fractal; graphene; j.h; properties; science
       cache: fumecheng-7201.pdf
  plain text: fumecheng-7201.txt

        item: #439 of 526
          id: fumecheng-7202
      author: He, Chun-Hui; Liu, Chao; He, Ji-Huan; Shirazi, Ali Heidari; Mohammad-Sedighi, Hamid
       title: PASSIVE ATMOSPHERIC WATER HARVESTING UTILIZING AN ANCIENT CHINESE INK SLAB
        date: 2021
       words: 3763
      flesch: 57
     summary: This paper introduces an ancient ink slab, which was recorded in MengxiBitan (梦溪笔谈 ) by Shen Kuo(沈 括)(1031~1095), for water collection from air. There is a similar ancient device for water collection from the air; it is called as Fangzhu, which was widely recorded in many ancient Chinese classics.
    keywords: fangzhu; frequency; harvesting; ink; materials; slab; water
       cache: fumecheng-7202.pdf
  plain text: fumecheng-7202.txt

        item: #440 of 526
          id: fumecheng-7223
      author: He, Ji-Huan; Hou, Wei-Fan; Qie, Na; Gepreel, Khaled A.; Shirazi, Ali Heidari; Sedighi, Hamid Mohammad-
       title: HAMILTONIAN-BASED FREQUENCY-AMPLITUDE FORMULATION FOR NONLINEAR OSCILLATORS
        date: 2021
       words: 3398
      flesch: 53
     summary: Complex mechanical systems usually include nonlinear interactions between their components which can be modeled by nonlinear equations that describe the sophisticated motion of the system. He, J.-H., 2008, Comment on ‘He’s frequency formulation for nonlinear oscillators, European Journal of Physics, 29(4), pp.
    keywords: amplitude; equation; formulation; frequency; h.m; journal; nonlinear; vibration
       cache: fumecheng-7223.pdf
  plain text: fumecheng-7223.txt

        item: #441 of 526
          id: fumecheng-7253
      author: Abouelregal, Ahmed E.; Mohammad-Sedighi, Hamid; Faghidian, Seyed Ali; Shirazi, Ali Heidari
       title: TEMPERATURE-DEPENDENT PHYSICAL CHARACTERISTICS OF THE ROTATING NONLOCAL NANOBEAMS SUBJECT TO A VARYING HEAT SOURCE AND A DYNAMIC LOAD
        date: 2021
       words: 8382
      flesch: 56
     summary: [(1 + 6𝜉𝐿Ω2(2𝑟+𝐿) ℎ2 ) d4 d𝑥4 − ( 12𝜉𝑠2 ℎ2 + 6𝐿Ω2(2𝑟+𝐿) ℎ2 ) d2 d𝑥2 + 12𝑠2 ℎ2 ] �̅� = − 24𝑇0𝛼𝑇 𝜋2ℎ d2Θ̅ d𝑥2 − �̅�(𝑠) (41) (1 + 𝜏𝜃𝑠) ( d2 d𝑥2 − 𝜋2 ℎ2) Ψ̅ = 𝑠(1 + 𝜏𝑞s + 𝑠2𝜏𝑞 2/2) (Ψ̅ − 𝛾𝜋2ℎ 24𝐾𝜂 d2�̅� d𝑥2) (42) �̅�(𝑥, 𝑠) = 12𝜉𝑠2 ℎ2 �̅� − (1 + 6𝜉𝐿Ω2(2𝑟+𝐿) ℎ2 ) d2�̅� d𝑥2 − 24𝑇0𝛼𝑇 𝜋2ℎ Θ̅ − 𝜉�̅�(𝑠) (43) The analytic solutions for bending moment, deflection and temperature of rotating nonlocal nanobeams are achieved by means of the Laplace transform procedure.
    keywords: conductivity; fig; nanobeam; parameter; rotating; temperature; theory; 𝜕𝑥2
       cache: fumecheng-7253.pdf
  plain text: fumecheng-7253.txt

        item: #442 of 526
          id: fumecheng-7267
      author: Brkić, Dejan; Stajić, Zoran
       title: EXCEL VBA-BASED USER DEFINED FUNCTIONS FOR HIGHLY PRECISE COLEBROOK’S PIPE FLOW FRICTION APPROXIMATIONS: A COMPARATIVE OVERVIEW
        date: 2021
       words: 5561
      flesch: 65
     summary: Zigrang, D.J., Sylvester, N.D., 1985, A review of explicit friction factor equations, Journal of Energy Resources Technology, 107(2), pp. 280-283. Key words: Hydraulic resistance, Colebrook flow friction, Lambert W-function, Excel Macro Programming, Visual Basic for Applications (VBA), User Defined Functions (UDFs) 1. INTRODUCTION The Colebrook equation from 1939
    keywords: colebrook; equation; function; 𝐴𝑠 𝐷𝑜𝑢𝑏𝑙𝑒; 𝐷𝑜𝑢𝑏𝑙𝑒 𝐷𝑖𝑚; 𝐷𝑜𝑢𝑏𝑙𝑒 𝐼𝑓; 𝐸𝑃𝑆𝐼𝐿𝑂𝑁 𝐴𝑠; 𝐸𝑛𝑑 𝐼𝑓; 𝐹𝑢𝑛𝑐𝑡𝑖𝑜𝑛 𝐸𝑛𝑑; 𝐼𝑓 𝑅𝐸𝑌𝑁𝑂𝐿𝐷𝑆; 𝑂𝑟 𝐸𝑃𝑆𝐼𝐿𝑂𝑁
       cache: fumecheng-7267.pdf
  plain text: fumecheng-7267.txt

        item: #443 of 526
          id: fumecheng-7268
      author: Andrejić, Milan; Kilibarda, Milorad; Pajić, Vukašin
       title: MEASURING EFFICIENCY CHANGE IN TIME APPLYING MALMQUIST PRODUCTIVITY INDEX: A CASE OF DISTRIBUTION CENTRES IN SERBIA
        date: 2021
       words: 8740
      flesch: 53
     summary: In order to estimate DMU efficiency, it is necessary to have data of consumed input and realized output variables. The methodology of model development and its application for measuring DC efficiency change in time is given below: ▪ Step 1 – defining potential input and output variables; ▪ Step 2 – a selection of input and output variables and model defining: Model 1,
    keywords: change; dcs; dea; dmu; efficiency; input; logistics; model; number; output; variables
       cache: fumecheng-7268.pdf
  plain text: fumecheng-7268.txt

        item: #444 of 526
          id: fumecheng-7289
      author: Akıncıoğlu, Sıtkı
       title: TAGUCHI OPTIMIZATION OF MULTIPLE PERFORMANCE CHARACTERISTICS IN THE ELECTRICAL DISCHARGE MACHINING OF THE TIGR2
        date: 2022
       words: 7214
      flesch: 60
     summary: They investigated material wear loss, tool wear loss, and surface roughness values and successfully determined the optimum parameters for MRR, tool TWR, and surface roughness. The best value for average surface roughness was determined to be 3.29 µm obtained at 120 μs time-on, 8 A, and 40 μs time-off. ▪ According to the S/N ratios, the most suitable parameter values for MRR were A3B3C1, for TWR A1B3C1, for depth A3B3C1, and for surface roughness A1B1C1. ▪
    keywords: amperage; discharge; edm; machining; material; mrr; parameters; roughness; surface; surface roughness; taguchi; time; titanium; twr; values
       cache: fumecheng-7289.pdf
  plain text: fumecheng-7289.txt

        item: #445 of 526
          id: fumecheng-7300
      author: Ciavarella, Michele; McMeeking, Robert M.; Cricrì, Gabriele
       title: ON THE AFFERRANTE-CARBONE THEORY OF ULTRATOUGH TAPE PEELING
        date: 2023
       words: 3944
      flesch: 63
     summary: (2) will predict the ratio of effective adhesion energies at fast peel rates versus slow rates, and the behavior in terms of effective adhesion energy may well be given by Eq. The enhancement of the apparent adhesion energy is thus non- monotonic and has a maximum at peeling rates for which ντ0/L ≈ 1. a) b) Fig.
    keywords: adhesion; energy; model; peeling; rate; tape; viscoelastic
       cache: fumecheng-7300.pdf
  plain text: fumecheng-7300.txt

        item: #446 of 526
          id: fumecheng-7336
      author: Pakhaliuk, Vladimir; Poliakov, Aleksandr; Fedotov, Ivan
       title: THE CERAMIC MODULAR HEAD IMPROVEMENT IN THE DESIGN OF A TOTAL HIP REPLACEMENT
        date: 2021
       words: 5842
      flesch: 54
     summary: For ceramic head and liner: alumina ceramic (Al2O3) with Young's modulus E=380 GPa, Poisson's ratio is μ=0.22, ultimate strength in bending is σb=325 MPa. Dickinson, E.C., Sellenschloh, K., Morlock, M.M., 2019, Impact of stem taper damage on the fracture strength of ceramic heads with adapter sleeves, Clinical Biomechanics, 63, pp.
    keywords: alloy; ceramic; design; head; hip; hole; joint; sleeve; stem; surface; thr
       cache: fumecheng-7336.pdf
  plain text: fumecheng-7336.txt

        item: #447 of 526
          id: fumecheng-7343
      author: Geike, Thomas
       title: BUBBLE DYNAMICS-BASED MODELING OF THE CAVITATION DYNAMICS IN LUBRICATED CONTACTS
        date: 2021
       words: 3649
      flesch: 55
     summary: Tensile stresses are reproduced in simulation models with bubble dynamics An overview of research results on the simulation of cavitation dynamics can be found in the publications [2,3]. To make BEM simulations with cavitation dynamics efficient, it is also advisable to undertake further studies of the negative squeeze motion regarding the relevance of terms (inertia, viscosity, surface tension).
    keywords: bubble; cavitation; dynamics; equation; pressure; squeeze; tensile; time
       cache: fumecheng-7343.pdf
  plain text: fumecheng-7343.txt

        item: #448 of 526
          id: fumecheng-7344
      author: Argatov, Ivan I.; Chai, Young Suck
       title: AN ANALYTICAL APPROACH TO THE THIRD BODY MODELLING IN FRETTING WEAR CONTACT: A MINIREVIEW
        date: 2021
       words: 3956
      flesch: 57
     summary: It goes without saying that, while a substantial progress has been made in recent years in analysis of fretting wear (without third body) both in gross-slip and partial-slip regimes as well as in two- and three-dimensional settings, the problem of third body modelling is still under-researched, in particular, in regard to modelling the in time and in-plane evolution of the third-body layer under partial-slip fretting wear conditions. In fretting wear contact, the third body is defined as the wear debris bed between two contacting bodies.
    keywords: body; body layer; contact; debris; fretting; layer; mechanics; wear
       cache: fumecheng-7344.pdf
  plain text: fumecheng-7344.txt

        item: #449 of 526
          id: fumecheng-7345
      author: Balokhonov, Ruslan; Romanova, Varvara; Schwab, Eugen; Zemlianov, Aleksandr; Evtushenko, Eugene
       title: COMPUTATIONAL MICROSTRUCTURE-BASED ANALYSIS OF RESIDUAL STRESS EVOLUTION IN METAL-MATRIX COMPOSITE MATERIALS DURING THERMOMECHANICAL LOADING
        date: 2021
       words: 4724
      flesch: 44
     summary: Liang Ma, Cheng Huang, Kevin Dolman, Xinhu Tang, Jianjun Yang, Zheng Shi, Zhong-Sheng Liu, 2017, A method to calculate the bulk hardness of metal matrix composite using Hadfield steel reinforced with niobium carbide particles as an example, Mechanics of Materials, 112, pp. 154-162. 14. 5. Gopinath Muvvala, Debapriya Patra Karmakar, Ashish Kumar Nath, 2017, Online assessment of TiC decomposition in laser cladding of metal matrix composite coating, Materials and Design, 121, pp. 310-320.
    keywords: composite; compression; cooling; fig; materials; matrix; metal; particle; stress; stresses; tension
       cache: fumecheng-7345.pdf
  plain text: fumecheng-7345.txt

        item: #450 of 526
          id: fumecheng-7346
      author: Anjum, Naveed; He, Ji-Huan; Ain, Qura Tul; Tian, Dan
       title: LI-HE’S MODIFIED HOMOTOPY PERTURBATION METHOD FOR DOUBLY-CLAMPED ELECTRICALLY ACTUATED MICROBEAMS-BASED MICROELECTROMECHANICAL SYSTEM
        date: 2021
       words: 5439
      flesch: 67
     summary:    − = = = (31) 4 3 5 7 2 4 2 1 1 1 0 3 4 0 3 5 0 3 6 0 1 3 0 0 2 3 0 0 4 0 0 2 3 2 4 5 2 6 0 0 5 0 0 0 0 6 0 0 0 0 1 0 0 0 2 2 2 2 2 3 0 0 0 0 0 0 2 0 0 0 0 (6 3 ) (20 5 ) (42 7 ) (4 2 2 ) (12 4 b b b b b b b b b b b b b b b    − − − − − − − +       + + + + + + +       + + + +                                    2 3 4 0 0 0 0 0 08 ) 0  − − − −  −  −  +  +  +  +   (36) 3 5 7 3 2 5 23 4 3 5 3 6 54 2 7 2 3 2 5 2 3 4 5 46 1 2 1 2 5 21 459 4 16 64 4 16 189 5 9 45 64 4 16 4 16 b b b b b b bb A A A A A b b b b b A A A A A   = − − − − 
    keywords: b b; method; perturbation; − −; − ;  
       cache: fumecheng-7346.pdf
  plain text: fumecheng-7346.txt

        item: #451 of 526
          id: fumecheng-7353
      author: Li, Qiang; Lyashenko, Iakov A.; Starcevic, Jasminka
       title: AN EXPERIMENTAL STUDY ON THIRD-BODY PARTICLE TRANSPORT IN SLIDING CONTACT
        date: 2021
       words: 2028
      flesch: 61
     summary: The elastic interaction among particle, wavy surface and foundation could be understood by numerical simulation using for example the Fast Fourier Transform assisted Boundary Element Method in which adhesion or friction could be taken into account and the state of particles (sticking, rolling or sliding) could be identified [13, 14]. An Experimental Study on Third-Body Particle Transport in Sliding Contact 5 4. CONCLUSION An experimental study on particle transport in three-body contact was reported.
    keywords: body; contact; fig; particles; sliding
       cache: fumecheng-7353.pdf
  plain text: fumecheng-7353.txt

        item: #452 of 526
          id: fumecheng-7354
      author: Shilko, Evgeny V.; Grigoriev, Aleksandr S.; Smolin, Alexey Yu.
       title: A DISCRETE ELEMENT FORMALISM FOR MODELLING WEAR PARTICLE FORMATION IN CONTACT BETWEEN SLIDING METALS
        date: 2021
       words: 8215
      flesch: 51
     summary: Despite large capabilities, the formalism of the method needs further development to study the evolution of transfer fragments in metallic friction pairs, including the formation of large interfacial elements and the competition of their evolutions. We show that the model allows adequate describing the formation and evolution of large interfacial elements as well as the competition between interfacial elements in the contact zone.
    keywords: contact; elements; formation; fragments; friction; materials; model; particles; plastic; strain; stress; surfaces; value; wear; welding
       cache: fumecheng-7354.pdf
  plain text: fumecheng-7354.txt

        item: #453 of 526
          id: fumecheng-7355
      author: Popov, Valentin L.; Lyashenko, Iakov A.; Starcevic, Jasminka
       title: SHAPE OF A SLIDING CAPILLARY CONTACT DUE TO THE HYSTERESIS OF CONTACT ANGLE: THEORY AND EXPERIMENT
        date: 2021
       words: 4247
      flesch: 64
     summary: Popov, V.L., Lyashenko, I.A., Starcevic, J., 2021, Shape of a sliding capillary contact due to hysteresis of contact angle (experiment with indenter R=33mm), supplementary video. Popov, V.L., Lyashenko, I.A., Starcevic, J., 2021, Shape of a sliding capillary contact due to hysteresis of contact angle (experiment with indenter R=100mm), supplementary video.
    keywords: angle; boundary; contact; fig; force; friction; indenter; shape
       cache: fumecheng-7355.pdf
  plain text: fumecheng-7355.txt

        item: #454 of 526
          id: fumecheng-7356
      author: Cao, Hui; Tian, Yu; Meng, Yonggang
       title: A FRACTURE-INDUCED ADHESIVE WEAR CRITERION AND ITS APPLICATION TO THE SIMULATION OF WEAR PROCESS OF THE POINT CONTACTS UNDER MIXED LUBRICATION CONDITION
        date: 2021
       words: 6643
      flesch: 53
     summary: In addition, it can be observed that at a fixed position, the height changes with great randomness, for the reason that the thickness of wear element was assumed to be stochastic in the modeling, which is in accord with observations in common wear surfaces. After the test, total wear volume V in a period of friction time Tf of 5000 s was measured with a 3D profilometer as 8.18×105 μm3, and frictional work Wf was calculated according to the friction coefficient measured during the test as 11.654 J. Provided the statistical parameters for surface energy, work of adhesion and thickness of wear element are given as listed in Table 1, taking the wear element size as 1.17μm, we can calculate the values of Ac and Aw as 1.1μm2 and 1.076μm2 30 H. CAO, Y. TIAN, Y. MENG respectively, and volume, Vw, of a wear element with the mean thickness of 90nm is 0.0487μm3.
    keywords: criterion; element; energy; fig; friction; lubrication; process; simulation; sliding; surface; wear; wear criterion; work
       cache: fumecheng-7356.pdf
  plain text: fumecheng-7356.txt

        item: #455 of 526
          id: fumecheng-7362
      author: Skripnyak, Vladimir A.; Iokhim, Kristina; Skripnyak, Evgeniya; Skripnyak, Vladimir V.
       title: MODELING OF TITANIUM ALLOYS PLASTIC FLOW IN LINEAR FRICTION WELDING
        date: 2021
       words: 6555
      flesch: 56
     summary: In the near-surface layers of the bodies being welded, titanium alloys can be deformed in the mode of severe plastic deformation. The hcp-bcc phase transition of titanium alloys upon heating in the LFW process necessitates an increase in the cyclic loading time to obtain a welded joint.
    keywords: alloys; friction; lfw; material; plastic; process; skripnyak; stress; titanium; titanium alloys; welding; zone
       cache: fumecheng-7362.pdf
  plain text: fumecheng-7362.txt

        item: #456 of 526
          id: fumecheng-7366
      author: Smolin, Alexey Yu.; Filippov, Andrey V.; Shilko, Evgeny V.
       title: FRICTION BEHAVIOR OF ALUMINUM BRONZE REINFORCED BY BORON CARBIDE PARTICLES
        date: 2021
       words: 6526
      flesch: 52
     summary: A promising composite material for tribotechnical applications based on aluminum bronze with reinforcing boron carbide particles fabricated by a special electron beam additive deposition technique was studied experimentally and numerically. The simulation results also confirm that the higher friction coefficient of pure bronze may be explained by the higher adhesion of this material, while the presence of carbide and carbon particles reduces the adhesion and consequently the value of friction coefficient.
    keywords: aluminum; b4c; boron; bronze; carbide; coefficient; composite; fig; friction; material; matrix; particles; sample; wear
       cache: fumecheng-7366.pdf
  plain text: fumecheng-7366.txt

        item: #457 of 526
          id: fumecheng-7374
      author: Dmitriev, Andrey I.
       title: NUMERICAL MODEL OF A LOCAL CONTACT OF A POLYMER NANOCOMPOSITE AND ITS EXPERIMENTAL VALIDATION
        date: 2021
       words: 4782
      flesch: 54
     summary: For comparison the simulation results were shown as individual points, which were obtained by averaging friction coefficient values over the stage of steady-state sliding. Since in our preliminary studies [22] it was not possible to obtain the required response of the hybrid PNC with varying the pv-factor in the present model for silica particles, the temperature dependence of the mechanical properties calculated by the molecular dynamics method was introduced [23, 24].
    keywords: automata; friction; hybrid; nanocomposite; particles; polymer; properties; silica; sliding; surface
       cache: fumecheng-7374.pdf
  plain text: fumecheng-7374.txt

        item: #458 of 526
          id: fumecheng-7381
      author: Romanova, Varvara; Balokhonov, Ruslan; Zinovieva, Olga
       title: MESOSCALE DEFORMATION-INDUCED SURFACE PHENOMENA IN LOADED POLYCRYSTALS
        date: 2021
       words: 5006
      flesch: 51
     summary: Key words: Polycrystals, Free surface, Grain boundaries, Deformation-induced roughness, Microstructure-based calculations, Mesomechanics 1. INTRODUCTION The mechanical and physical properties of material surface layers are among the key factors determining the service life of machine parts and components. Mesoscale Deformation-Induced Surface Phenomena in Loaded Polycrystals 191 0 100 200 300 300 450 600 F re e s u rf a c e Distance below free surface, m mean maximum minimum -60 -30 0 30 -60 -30 0 30  e q M P a  3 3 M P a  2 2 M P a 300 450 600  1 1 , M P a a b c Fig.
    keywords: deformation; fig; grain; mesoscale; plastic; polycrystalline; polycrystals; strain; stress; surface
       cache: fumecheng-7381.pdf
  plain text: fumecheng-7381.txt

        item: #459 of 526
          id: fumecheng-7383
      author: Forsbach, Fabian; Heß, Markus
       title: A RIGOROUS MODEL FOR FREQUENCY-DEPENDENT FINGERPAD FRICTION UNDER ELECTROADHESION
        date: 2021
       words: 4551
      flesch: 54
     summary: Ridge contact area For decreasing thickness of the stratum corneum and increasing ridge contact area (on the upper left and right of Fig. 3, respectively), the electroadhesive force increases approximately linearly in the whole frequency spectrum.
    keywords: area; contact; force; frequency; friction; gap; model; voltage
       cache: fumecheng-7383.pdf
  plain text: fumecheng-7383.txt

        item: #460 of 526
          id: fumecheng-7385
      author: He, Ji-Huan; El-Dib, Yusry O.
       title: THE ENHANCED HOMOTOPY PERTURBATION METHOD FOR AXIAL VIBRATION OF STRINGS
        date: 2021
       words: 6281
      flesch: 69
     summary: [25] used the reducing rank method to solve a third-order damped nonlinear equation produced from the strong damped nonlinear KG equation One of the most traditional techniques to find an approximate solution is the homotopy perturbation method (HPM). It provides solutions to nonlinear equations for which the classical perturbation method proved unsuccessful.
    keywords: equation; solution
       cache: fumecheng-7385.pdf
  plain text: fumecheng-7385.txt

        item: #461 of 526
          id: fumecheng-7390
      author: Popov, Mikhail
       title: FRICTION UNDER LARGE-AMPLITUDE NORMAL OSCILLATIONS
        date: 2021
       words: 3260
      flesch: 61
     summary: If the dimensionless velocity β exceeds this threshold value, stick-slip becomes impossible and the macroscopic coefficient of friction  is the same as the intrinsic coefficient of friction µ0. The macroscopic coefficient of friction  can then be recovered through 0 0 0 (1 ( )) z x x w z z z F F F F k u       − 
    keywords: coefficient; friction
       cache: fumecheng-7390.pdf
  plain text: fumecheng-7390.txt

        item: #462 of 526
          id: fumecheng-7407
      author: Shekhovtsov, Andrii; Więckowski, Jakub; Kizielewicz, Bartłomiej; Sałabun, Wojciech
       title: TOWARDS RELIABLE DECISION-MAKING IN THE GREEN URBAN TRANSPORT DOMAIN
        date: 2022
       words: 8006
      flesch: 63
     summary: 1 Visualization of the positional rankings comparison of used MCDA methods It is worth noting that for the results obtained for the PROMETHEE II method, the preference values for the alternatives A7, A8 and A9 were the same, as they were for the pair of alternatives A1 and A5. There are often used methods belonging to the multi-criteria decision analysis (MCDA) methods in support systems, which work on the basis of evaluating a set of alternatives and giving them preference values thus assessing their quality concerning other options [4].
    keywords: alternatives; compromise; criteria; decision; mcda; methods; rank; rankings; similarity; values
       cache: fumecheng-7407.pdf
  plain text: fumecheng-7407.txt

        item: #463 of 526
          id: fumecheng-7413
      author: Kizielewicz, Bartłomiej; Więckowski, Jakub; Shekhovtsov, Andrii; Wątróbski, Jarosław; Depczyński, Radosław; Sałabun, Wojciech
       title: STUDY TOWARDS THE TIME-BASED MCDA RANKING ANALYSIS – A SUPPLIER SELECTION CASE STUDY
        date: 2021
       words: 7248
      flesch: 53
     summary: 5 Month to month MCDA based supplier rankings comparison with weighted Spearman correlation coefficient for standard deviation type weights Fig. 6 Month to month MCDA based supplier rankings comparison with WS similarity coefficient for equal type weights Study towards the Time-Based MCDA Ranking Analysis – a Supplier Selection Case Study 391 Fig. 7 Month to month MCDA based supplier rankings comparison with WS similarity coefficient for standard deviation type weights A relatively high correlation of rankings is shown in both cases, both for all used methods of determining the relative importance of attributes (Entropy, Equal and Standard deviation methods) and MCDA methods (COMET, SPOTIS and TOPSIS). Several works have also used rule-based and mixed-mode expansions of MCDA methods, and the current state of research in this area is available in Ref.
    keywords: analysis; coefficient; criteria; decision; mcda; methods; month; rankings; selection; study; supplier; topsis; weights
       cache: fumecheng-7413.pdf
  plain text: fumecheng-7413.txt

        item: #464 of 526
          id: fumecheng-7414
      author: Li, Xuejuan; Wang, Dan; Saeed, Tareq
       title: MULTI-SCALE NUMERICAL APPROACH TO THE POLYMER FILLING PROCESS IN THE WELD LINE REGION
        date: 2022
       words: 7037
      flesch: 67
     summary: We ( : ) ( 1)re t  −  = − −  ΛΛ u Λ Λ D S Λ (6) where We is the Weissenberg number; I denotes the unit tensor; D is the deformation rate tensor; r is the relaxation time ratio; α is a material parameter, defining the amount of anisotropy; ν= 2/q, where q is the amount of arms at the end of a backbone. We We t t U t t           =            u S Λ Multi-Scale Numerical Approach to the Polymer Filling Process in the Weld Line Region 369 and 4 4 2 ( 1) ( )2 ˆ ( ( )( 1) 1) Re Re ˆ ˆˆ ˆ ˆ ˆ( , , ; ) : We( ( ) ) 2We[ : ] 1 1 3 (1 3 tr( )) 3 ˆWe ( : ) ( 1) T H H p U re            −    − − +   −   +           =  −  −   +   −   +  + − −  −       −  − −  Λ u u D τ u u S u S S u u S D S S Λ S S Λ S S S
    keywords: filling; h h; line; polymer; process; region; scale; weld
       cache: fumecheng-7414.pdf
  plain text: fumecheng-7414.txt

        item: #465 of 526
          id: fumecheng-7420
      author: Koch, Sebastian; Köppen, Emil; Gräbner, Nils; von Wagner, Utz
       title: ON THE INFLUENCE OF MULTIPLE EQUILIBRIUM POSITIONS ON BRAKE NOISE
        date: 2021
       words: 7334
      flesch: 50
     summary: Taking this effect into consideration may have significant consequences for the design of brakes as well as simulation and experimental investigation of brake squeal. One reason is that the nonlinearity limiting the limit cycle could be a key for avoiding squealing, i.e. if this nonlinearity could be designed in a way that the amplitudes of the limit cycles are irrelevant for noise, the problem of brake squeal would be solved.
    keywords: brake; disk; equilibrium; fig; image; influence; noise; positions; series; squealing; test; torque
       cache: fumecheng-7420.pdf
  plain text: fumecheng-7420.txt

        item: #466 of 526
          id: fumecheng-7427
      author: Perec, Andrzej; Radomska-Zalas, Aleksandra; Fajdek-Bieda, Anna
       title: EXPERIMENTAL RESEARCH INTO MARBLE CUTTING BY ABRASIVE WATER JET
        date: 2022
       words: 4761
      flesch: 60
     summary: Perec, A., 2018, Environmental aspects of abrasive water jet cutting, Annual Set the Environment Protection - RocznikOchronaSrodowiska, 20(1), pp. Hreha, P., Radvanská, A., Hloch, S., Peržel, V., Królczyk, G., Monková, K., 2015, Determination of vibration frequency depending on abrasive mass flow rate during abrasive water jet cutting, The International Journal of Advanced Manufacturing Technology, 77(1-4), pp. 763-774.
    keywords: abrasive; cutting; depth; fig; grains; jet; marble; research; speed; water
       cache: fumecheng-7427.pdf
  plain text: fumecheng-7427.txt

        item: #467 of 526
          id: fumecheng-743
      author: Milković, Dragan; Simić, Goran; Tanasković, Jovan; Jakovljević, Živana; Lučanin, Vojkan
       title: EXPERIMENTAL AND NUMERICAL DETERMINATION OF THE WHEEL-RAIL ANGLE OF ATTACK
        date: 2015
       words: 3022
      flesch: 55
     summary: Experiments are performed on three types of rail vehicles: shunting locomotive series 631-301, motor unit 412-077 and trailing unit 416-077 of electromotor train 412/416. Also the comparison of the results shows that, provided the accurate track stiffness parameters are used, vehicle dynamics simulations can predict angle of attack with sufficient accuracy.
    keywords: angle; fig; measurements; rail; unit; vehicle; wear; wheel
       cache: fumecheng-743.pdf
  plain text: fumecheng-743.txt

        item: #468 of 526
          id: fumecheng-7431
      author: Turek, Paweł; Budzik, Grzegorz
       title: DEVELOPMENT OF A PROCEDURE FOR INCREASING THE ACCURACY OF THE RECONSTRUCTION AND TRIANGULATION PROCESS OF THE CRANIAL VAULT GEOMETRY FOR ADDITIVE MANUFACTURING
        date: 2025
       words: 4996
      flesch: 53
     summary: Van Eijnatten, M., Berger, F.H., De Graaf, P., Koivisto, J., Forouzanfar, T., Wolff, J., 2017, Influence of CT parameters on STL model accuracy, Rapid Prototyping Journal, 23(4), pp. A challenging task is to improve the accuracy of digital model geometry at the stage of acquisition and data processing.
    keywords: accuracy; cranial; data; fig; geometry; models; procedure; process; reconstruction
       cache: fumecheng-7431.pdf
  plain text: fumecheng-7431.txt

        item: #469 of 526
          id: fumecheng-7444
      author: Gritsenko, Alexandr; Shepelev, Vladimir; Fedoseev, Semen; Bedych, Tatyana
       title: INCREASE IN THE FUEL EFFICIENCY OF A DIESEL ENGINE BY DISCONNECTING SOME OF ITS CYLINDERS
        date: 2023
       words: 5790
      flesch: 47
     summary: The issues of increasing the fuel efficiency of cars and tractors by disconnecting some of engine cylinders have not been sufficiently studied despite a significant number of publications dealing with this topic THEORETICAL RESEARCH Disconnection of several engine cylinders is advisable when the car (tractor) moves in the transport mode with a small load along a horizontal supporting surface (a road with asphalt concrete or improved surfacing), as well as downhill [30-32].
    keywords: car; consumption; cylinders; deactivation; diesel; efficiency; engine; engine cylinders; fuel; fuel consumption; load; number; tractor; working
       cache: fumecheng-7444.pdf
  plain text: fumecheng-7444.txt

        item: #470 of 526
          id: fumecheng-7469
      author: Pamučar, Dragan; Žižović, Mališa; Biswas, Sanjib; Božanić, Darko
       title: A NEW LOGARITHM METHODOLOGY OF ADDITIVE WEIGHTS (LMAW) FOR MULTI-CRITERIA DECISION-MAKING: APPLICATION IN LOGISTICS
        date: 2021
       words: 9743
      flesch: 55
     summary: A comparative analysis of multi-criteria decision models for ERP package selection for improving supply chain performance, Asia-Pacific Journal of Management Research and Innovation, 12(3-4), pp. Comparison of the LMAW method with other multi-criteria methods A New Logarithm Methodology of Additive Weights (LMAW) for Multi-Criteria Decision-Making... 373 The VIKOR, TOPSIS and RAFSI methods confirmed the ranks of the LMAW method, with a high correlation, as the Spearman’s coefficient (SCC) for all three methods amounted to 0.943.
    keywords: alternatives; analysis; criteria; decision; lmaw; logistics; making; method; model; multi; new; topsis; values
       cache: fumecheng-7469.pdf
  plain text: fumecheng-7469.txt

        item: #471 of 526
          id: fumecheng-751
      author: Popov, Valentin L.
       title: ANALYSIS OF IMPACT ON COMPOSITE STRUCTURES WITH THE METHOD OF DIMENSIONALITY REDUCTION
        date: 2015
       words: 3024
      flesch: 59
     summary: In the present paper, we discuss the impact of rigid profiles on continua with non-local criteria for plastic yield. However, it is well known that the processes of plastic deformation, damage and fracture, independently of the detailed mechanism, are always non-local processes.
    keywords: contact; dimensionality; indentation; plastic; popov
       cache: fumecheng-751.pdf
  plain text: fumecheng-751.txt

        item: #472 of 526
          id: fumecheng-7514
      author: Sarker, Baneswar; Chakraborty, Shankar
       title: PARAMETRIC STUDY OF A CNC TURNING PROCESS USING DISCRIMINANT ANALYSIS
        date: 2023
       words: 10823
      flesch: 50
     summary: In this paper, an endeavor is put forward to apply discriminant analysis as a multivariate statistical tool to investigate the effects of speed, feed, depth of cut, nose radius and type of the machining environment of a CNC turning center on surface roughness, tool life, cutting force and power consumption. Keeping this objective in mind, this paper aims at the application of discriminant analysis for a CNC turning process in order to develop the corresponding discriminant functions showing the influences of Parametric Study of a CNC Turning Process using Discriminant Analysis 203 the considered process parameters on the responses, as well as to single out the most significant parameter for each of the responses.
    keywords: analysis; cnc; cut; discriminant; function; group; process; table; turning; values; variables
       cache: fumecheng-7514.pdf
  plain text: fumecheng-7514.txt

        item: #473 of 526
          id: fumecheng-7527
      author: Willert, Emanuel
       title: SELF-CONSISTENCY CONDITIONS IN STATIC THREE-BODY ELASTIC TANGENTIAL CONTACT
        date: 2024
       words: 3886
      flesch: 64
     summary: Because of that it is not feasible – although theoretically possible based on the known solution procedures for tangential contact problems with arbitrary loading histories [16] – to give a comprehensive analytic solution for Ti. In the general 3D case, there should also be contact spots in the lateral direction (outside the plane shown in Fig. 1), to ensure lateral stability during tangential motion, but this will be neglected in the following analysis.
    keywords: body; contact; forces; particle; sliding
       cache: fumecheng-7527.pdf
  plain text: fumecheng-7527.txt

        item: #474 of 526
          id: fumecheng-7536
      author: Kumar, Krishan; Chauhan, Prathvi Raj; Kumar, Rajan; Bharj, Rabinder Singh
       title: IRREVERSIBILITY ANALYSIS IN Al2O3-WATER NANOFLUID FLOW WITH VARIABLE PROPERTY
        date: 2022
       words: 5916
      flesch: 57
     summary: Rastogi, P., Mahulikar, S.P., 2018, Entropy generation in laminar forced convective water flow due to overloading toward the microscale, ASME Journal of Energy Resources Technology, 140(8), 082002. So, 58.72 µm is the optimum diameter of the channel under the considered condition and NF flow.
    keywords: al2o3; channel; flow; heat; kumar; sgen; water; 𝑆𝑔𝑒𝑛
       cache: fumecheng-7536.pdf
  plain text: fumecheng-7536.txt

        item: #475 of 526
          id: fumecheng-7557
      author: de Payrebrune, Kristin M.
       title: RELATION OF KINEMATICS AND CONTACT FORCES IN THREE-BODY SYSTEMS WITH A LIMITED NUMBER OF PARTICLES
        date: 2022
       words: 6194
      flesch: 58
     summary: The kinematics of individual particles or a layer of abrasive particles directly influences the material removal and the occurring process forces. 9 Black and white surface images of steel samples generated with different silicon carbide particles, rotational speeds and with an applied normal force Fz = 40 N. The arrow indicates the direction of particle motion with the upper side pointing outwards in a).
    keywords: contact; fig; force; force ratio; layer; motion; particles; ratio; rolling; sliding; surface
       cache: fumecheng-7557.pdf
  plain text: fumecheng-7557.txt

        item: #476 of 526
          id: fumecheng-7570
      author: Ulutaş, Alptekin; Balo, Figen; Sua, Lutfu; Demir, Ezgi; Topal, Ayşe; Jakovljević, Vladimir
       title: A NEW INTEGRATED GREY MCDM MODEL: CASE OF WAREHOUSE LOCATION SELECTION
        date: 2021
       words: 9331
      flesch: 61
     summary: The problem of warehouse location selection requires a crucial strategic decision plan for the businesses profitably. The problem of warehouse location selection has been discussed many times in the literature.
    keywords: criteria; decision; gpiv; grey; location; location selection; mcdm; method; model; problem; selection; warehouse; warehouse location; weights
       cache: fumecheng-7570.pdf
  plain text: fumecheng-7570.txt

        item: #477 of 526
          id: fumecheng-7573
      author: Liu, Fujuan; Zhang, Ting; He, Chun-Hui; Tian, Dan
       title: THERMAL OSCILLATION ARISING IN A HEAT SHOCK OF A POROUS HIERARCHY AND ITS APPLICATION
        date: 2022
       words: 5480
      flesch: 38
     summary: The frequency of heat flow oscillation is 0 0 0 0 0 2 2 Agyenim, F., Hewitt, N., Eames, P., Smyth, M., 2010, A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS), Renewable & Sustainable Energy Reviews, 14(2), pp.
    keywords: change; cocoon; energy; frequency; heat; journal; liu; materials; shock; silkworm; temperature
       cache: fumecheng-7573.pdf
  plain text: fumecheng-7573.txt

        item: #478 of 526
          id: fumecheng-7578
      author: Božanić, Darko; Milić, Aleksandar; Tešić, Duško; Salabun, Wojciech; Pamučar, Dragan
       title: D NUMBERS – FUCOM – FUZZY RAFSI MODEL FOR SELECTING THE GROUP OF CONSTRUCTION MACHINES FOR ENABLING MOBILITY
        date: 2021
       words: 11472
      flesch: 56
     summary: i iQ A Q A Q A Q A= +  + (20) where Q(Ai) is the defuzzified value of fuzzy criteria function �̃�(Ai), Q(Ai)l the left distribution of the confidence interval of fuzzy criteria function �̃�(Ai), Q(Ai)u the right distribution of the confidence interval of fuzzy criteria function �̃�(Ai), and Q(Ai)s the value of fuzzy criteria function �̃�(Ai) where the membership degree is the highest, receptively, one. Step 5 Calculation of fuzzy criteria functions of alternatives �̃�(Ai) and ranking alternatives.
    keywords: alternative; coefficients; construction; criteria; criterion; d numbers; decision; fucom; group; machines; making; method; model; numbers; selection; step; weight;  
       cache: fumecheng-7578.pdf
  plain text: fumecheng-7578.txt

        item: #479 of 526
          id: fumecheng-758
      author: Grzemba, Birthe
       title: NEW EXPERIMENTAL INVESTIGATIONS ON THE DIETERICH-RUINA FRICTION LAW
        date: 2015
       words: 3472
      flesch: 61
     summary: This method is still used for the identification of DRF law parameters for specific material pairings under given load and temperatures [5 6, 20]. The DRF law states that the coefficient of friction  depends on the relative velocity v and the contact history, represented by an internal state variable . Several examples for the use of internal variables in friction laws can be found in [13, 14].
    keywords: dieterich; drf; friction; law; parameters; ruina; slip; stick; velocity
       cache: fumecheng-758.pdf
  plain text: fumecheng-758.txt

        item: #480 of 526
          id: fumecheng-7594
      author: Nguyen, Xuan-Ha; Nguyen, Hung-Anh
       title: INVESTIGATION OF INFLUENCES OF FABRICATION TOLERANCES ON OPERATIONAL CHARACTERISTICS OF PIEZO-ACTUATED STICK-SLIP MICRO-DRIVES
        date: 2022
       words: 7660
      flesch: 54
     summary: A. H. NGUYEN Table 2 Standard parameters dependent on the radius of hemispheres used in simulations [20] Parameters 𝑅 = 0.25 𝑚𝑚 𝑅 = 0.5𝑚𝑚 𝑅 = 1𝑚𝑚 Stiffness of actuators - 𝑘𝑝 (𝑁/𝑚) 4 × 106 6 × 106 6.5 × 106 Damping ratio - 𝑐𝑝 (𝑘𝑔/𝑠) 10 14 16.3 Mass of actuator - 𝑚𝑎 (𝑔) 1.1 × 10−5 1.6 × 10−5 2.2 × 10−5 Preload range - 𝐹𝑝 (𝑁) 0.1 ÷ 0.5 0.1 ÷ 0.8 0.1 ÷ 1.5 Actuation amplitude - 𝐴 (𝑛𝑚) 96 160 200 Table 3 Parameter variation depending on the fabrication and assembly tolerance Parameter Position Standard value Varied value Angle between two actuator blocks on one side of the runner (𝛿) Type-A side Type-B side 𝛿 = 90° 𝛿 = 80°/100°, 70°/110 Key words: Microrobotics, Stick-slip micro-drivers, Piezo actuators, Contact mechanics, Dynamic simulation, Friction Received March 11, 2021 / Accepted April 12, 2021 Corresponding author: Xuan-Ha Nguyen Department of Machine Design and Robotics, School of Mechanical Engineering, Hanoi University of Science and Technology, Hanoi 112452, Vietnam E-mail: ha.nguyenxuan@hust.edu.vn mailto:ha.nguyenxuan@hust.edu.vn 110 H. X. NGUYEN, A. H. NGUYEN
    keywords: actuators; amplitude; case 𝑅; contact; fabrication; fig; hemispheres 𝑅; piezo; preload; runner; tolerance; 𝑅 =
       cache: fumecheng-7594.pdf
  plain text: fumecheng-7594.txt

        item: #481 of 526
          id: fumecheng-760
      author: Popov, Mikhail
       title: NON-FRICTIONAL DAMPING IN THE CONTACT OF TWO FIBERS SUBJECT TO SMALL OSCILLATIONS
        date: 2015
       words: 1911
      flesch: 62
     summary: Now, when the oscillation of contact forces is known, the corresponding components of relative displacement of contacting bodies, ux and uz can be found by dividing the force increments by contact stiffness kx in the tangential direction or kz in normal direction. As noted above, we assume that the indentation depth is small compared to the deflection of the beam, and apply non-penetration condition, uz = 0, which leads to a linear relationship between contact force and deflection of the free end: 0, 3  z zF EI W l .
    keywords: contact; damping
       cache: fumecheng-760.pdf
  plain text: fumecheng-760.txt

        item: #482 of 526
          id: fumecheng-7612
      author: Wang, Peng; Wu, Nan; Luo, Haitao; Sun, Zhili
       title: STUDY ON VIBRATION RESPONSE OF A NON-UNIFORM BEAM WITH NONLINEAR BOUNDARY CONDITION
        date: 2021
       words: 11428
      flesch: 69
     summary: d i t t t t d d w x t W x q t W x q t q t W x e A t B t F t e t t d               = =  − = − − − =  + + +    − −     ( 2 3t t t  ). d i t t t t d d w x t W x q t W x q t q t W x e A t B t F t e t t d               = =  − = − − − =  + + +    − −     ( 2 3t t t  ).
    keywords: beam; boundary; dx w; q t; t t; t w; vibration; w x; x dx; x t
       cache: fumecheng-7612.pdf
  plain text: fumecheng-7612.txt

        item: #483 of 526
          id: fumecheng-763
      author: Voll, Lars
       title: EXPERIMENTAL INVESTIGATION OF THE ADHESIVE CONTACT WITH ELASTOMERS: EFFECT OF SURFACE ROUGHNESS
        date: 2015
       words: 2410
      flesch: 59
     summary: In a variety of applications of elastomers adhesive forces play a significant role, which may be desirable or undesirable. These were pressed into the elastomer with different normal forces.
    keywords: adhesion; contact; elastomer; force; roughness
       cache: fumecheng-763.pdf
  plain text: fumecheng-763.txt

        item: #484 of 526
          id: fumecheng-7635
      author: Biswas, Sanjoy; Mukhopadhyay, Achintya
       title: ASSESSMENT OF THE QUADRUPLE INJECTION STRATEGY OVER TRIPLE INJECTIONS TO IMPROVE EMISSIONS, PERFORMANCE AND NOISE OF THE AUTOMOTIVE DIESEL ENGINE
        date: 2022
       words: 6420
      flesch: 59
     summary: The influence of alternative fuel on performance, combustion and emissions has also been explored [10-11] with variation in injection parameters or injection strategies. 10 Average BTE at different loads and overall average BTE of injection strategies Assessment of Quadruple Injection Strategy over Triple Injections to Improve Emissions... 331 Fig.
    keywords: emissions; engine; epma; fig; fuel; injection; injection strategy; load; performance; pma; quadruple; smoke; strategies; strategy; torque
       cache: fumecheng-7635.pdf
  plain text: fumecheng-7635.txt

        item: #485 of 526
          id: fumecheng-764
      author: Pohrt, Roman; Popov, Valentin L.
       title: ADHESIVE CONTACT SIMULATION OF ELASTIC SOLIDS USING LOCAL MESH-DEPENDENT DETACHMENT CRITERION IN BOUNDARY ELEMENTS METHOD
        date: 2015
       words: 2732
      flesch: 66
     summary: Using two examples with known analytical solutions, we show that this approach can successfully simulate the pull-off of adhesive contact. In the first step, contact area A is left unchanged and the stresses are solved which are necessary for eliminating the gap between the bodies.
    keywords: contact; grid; points
       cache: fumecheng-764.pdf
  plain text: fumecheng-764.txt

        item: #486 of 526
          id: fumecheng-7642
      author: Németh, Attila; Fischer, Szabolcs
       title: INVESTIGATION OF THE GLUED INSULATED RAIL JOINTS APPLIED TO CWR TRACKS
        date: 2021
       words: 11183
      flesch: 58
     summary: [27]) Insulated rail joints are special types of fishplated rail joints where the rail ends are insulated from each other. [36]: battering, shelling and metal flow of rail end; endpost battering, delamination; cracked joint bar (fishplate); railhead spalling; chipping at rail end and gage corner; railhead crushing; opening (pull apart) of insulated rail joint; dipping of insulated rail joint.
    keywords: adhesive; bending; case; fatigue; fishplates; force; gap; length; opening; rail; rail joints; railway; specimens; steel; tests; tracks; values
       cache: fumecheng-7642.pdf
  plain text: fumecheng-7642.txt

        item: #487 of 526
          id: fumecheng-7649
      author: Ostermeyer, Georg-Peter; Popov, Valentin L.
       title: FOREWORD TO THE THEMATIC ISSUE: WEAR PARTICLE TRANSPORT AND EMISSION: MECHANISMS AND ENVIRONMENTAL IMPLICATIONS
        date: 2021
       words: 1042
      flesch: 51
     summary: MECHANISMS AND ENVIRONMENTAL IMPLICATIONS Georg-Peter Ostermeyer1, Valentin L. Popov2 1Technische Universität Braunschweig, Braunschweig, Germany 2Technische Universität Berlin, Berlin, Germany The papers of the present Special Issue as well as a number of papers of the subsequent Issues of Facta Universitatis – Series Mechanical Engineering represent extended versions of the research works presented at the International Workshop Wear particle transport and emission: Mechanisms and environmental implications which was carried out online from 24. to 25. At the microscale and nanoscale, again single particles were in focus, e.g. in quasi-molecular dynamics simulations.
    keywords: body; engineering; wear
       cache: fumecheng-7649.pdf
  plain text: fumecheng-7649.txt

        item: #488 of 526
          id: fumecheng-767
      author: Heise, Rainer
       title: FLASH TEMPERATURES GENERATED BY FRICTION OF A VISCOELASTIC BODY
        date: 2015
       words: 7208
      flesch: 69
     summary: j j j j j j j j j z z z z p f u f f v dt dx       (53) The contact length is computed as the sum over the number of contact site times the spatial step .
    keywords: contact; force; friction; h h; j j; surface; temperature;  
       cache: fumecheng-767.pdf
  plain text: fumecheng-767.txt

        item: #489 of 526
          id: fumecheng-7698
      author: Hashemi Kachapi, Sayyid H.
       title: NONLINEAR VIBRATION RESPONSE OF PIEZOELECTRIC NANOSENSOR: INFLUENCES OF SURFACE/INTERFACE EFFECTS
        date: 2023
       words: 4205
      flesch: 49
     summary: Recently, using surface effect, buckling and postbuckling analysis and also vibration behavior of nano structures with piezoelectric layers are studied by Fang et al. Pourkiaee, S. M., Khadem, S. E., Shahgholi, M., Bab, S., 2017, Nonlinear modal interactions and bifurcations of a piezoelectric nanoresonator with three-to-one internal resonances incorporating surface effects and van der Waals dissipation forces, Nonlinear Dynamics, 88, pp.
    keywords: analysis; effects; interface; pens; pull; surface; ̅ �; � ̅
       cache: fumecheng-7698.pdf
  plain text: fumecheng-7698.txt

        item: #490 of 526
          id: fumecheng-770
      author: Milahin, Natalie; Li, Qiang; Starcevic, Jasminka
       title: INFLUENCE OF THE NORMAL FORCE ON THE SLIDING FRICTION UNDER ULTRASONIC OSCILLATIONS
        date: 2015
       words: 1999
      flesch: 52
     summary: The effect of ultrasonic oscillation on the sliding friction has been studied for a few decades, including all possible directions of vibration with consideration of various frequencies and oscillation amplitudes [6-10]. In the recent paper [10], the influence of ultrasonic oscillations for the basic configuration (in-plane-oscillations: oscillations in the contact plane along and perpendicular to the sliding direction; out-of-plane oscillations: oscillations perpendicular to the contact surface) is systematically studied in the relevant interval of the oscillation amplitudes and sliding velocities.
    keywords: force; friction; oscillation
       cache: fumecheng-770.pdf
  plain text: fumecheng-770.txt

        item: #491 of 526
          id: fumecheng-7707
      author: Willert, Emanuel
       title: FFT-BASED IMPLEMENTATION OF THE MDR TRANSFORMATIONS FOR HOMOGENEOUS AND POWER-LAW GRADED MATERIALS
        date: 2021
       words: 4808
      flesch: 59
     summary: the results of a convergence study for that algorithm with an analytical solution, 2 2 24 ˆ ˆ( ) , ( ) (2 ) 3 q a a= = − − +       (18) are given. j + + − + + + = +  = − − = − = −   +    = − + −             (29) 4.
    keywords: contact
       cache: fumecheng-7707.pdf
  plain text: fumecheng-7707.txt

        item: #492 of 526
          id: fumecheng-7710
      author: Mahmutagić, Eldina; Stević, Željko; Nunić, Zdravko; Chatterjee, Prasenjit; Tanackov, Ilija
       title: AN INTEGRATED DECISION-MAKING MODEL FOR EFFICIENCY ANALYSIS OF THE FORKLIFTS IN WAREHOUSING SYSTEMS
        date: 2021
       words: 7219
      flesch: 53
     summary: The collected data from the analysis of forklift efficiency and application of the integrated DEA-MCDM model cover one calendar year (2019). Section 4 presents application of DEA method, while Section 5 provides selection of the most efficient forklift using FUCOM and MARCOS methods.
    keywords: analysis; criteria; criterion; dea; efficiency; forklifts; fucom; marcos; method; model; results; value
       cache: fumecheng-7710.pdf
  plain text: fumecheng-7710.txt

        item: #493 of 526
          id: fumecheng-7717
      author: Cai, Yan; Zhou, Liming; Li, Ming
       title: FRACTURE PARAMETERS EVALUATION FOR THE CRACKED NONHOMOGENEOUS ENAMEL BASED ON THE FINITE ELEMENT METHOD AND VIRTUAL CRACK CLOSURE TECHNIQUE
        date: 2023
       words: 6188
      flesch: 62
     summary: Example 1 Given the problem of central enamel cracks, we have selected finite-width central crack tension trials. To accurately solve the fracture parameters of enamel, we have established computational nonhomogeneous enamel models and constructed the fracture element of enamel dumb nodes, based on the enamel mineral concentration, nonhomogeneous mechanical properties, and virtual crack closure technique.
    keywords: analysis; closure; crack; element; enamel; factors; fig; finite; fracture; materials; method; model; technique; vcct
       cache: fumecheng-7717.pdf
  plain text: fumecheng-7717.txt

        item: #494 of 526
          id: fumecheng-7718
      author: Osintsev, Nikita; Rakhmangulov, Aleksandr; Baginova, Vera
       title: EVALUATION OF LOGISTIC FLOWS IN GREEN SUPPLY CHAINS BASED ON THE COMBINED DEMATEL-ANP METHOD
        date: 2021
       words: 15008
      flesch: 60
     summary: 486 N. OSINTSEV, A. RAKHMANGULOV, V. BAGINOVA Justification of the logistics flows parameters and indicators in green supply chains Phase 1 Justification of parameters and indicators Using DEMATEL to analyze relationships between logistics flows parameters Phase 2 DEMATEL Phase 3 ANP Using ANP to rank logistics flow indicators in green supply chains 2.1 Initial direct relation matrix of the logistics flows parameters and indicators 2.2 Normalize the initial influence matrix 2.3 Compute total influence matrix 2.4 Calculation of the strength of the relationship and influence between the logistics flows parameters and indicators 2.5 Obtaining the causal diagram Academic experience Green programs, strategies, and projects Best green practices Literature review Using DEMATEL to analyze relationships between logistics flows indicators 3.1 Formation of a logistic flow evaluation system (LFES) 3.2 Construct pairwise comparison matrices of the logistics flows parameters and indicators 3.3 Supermatrix formation 3.4 Limit supermatrix formation 3.5 Calculation of the weight of the logistics flows indicators Weights of the logistics flows indicators in green supply chains Fig. [99] Analysis of consumer demand when choosing a supplier in green supply chains [105] Assessment of sustainable development of small and medium-sized enterprises [106] The main identified disadvantages of using the DEMATEL and ANP methods in the GSCM are: ▪ the generally accepted universal system of parameters and indicators of logistics flows has not been developed, ▪ the methods of complex evaluation of the set of logistics flows indicators are underdeveloped, ▪ the relationship of indicators and parameters of logistics flows from the standpoint of the concept of sustainable development is insufficiently studied, ▪ the evaluation of logistics flows is considered in relation to specific (isolated) elements of the GSCM, ▪ the evaluation of all logistics flows in GSCM to achieve sustainable development goals is carried out insufficiently comprehensively and systematically.
    keywords: anp; chain; coefficient; criteria; dematel; development; evaluation; flows; gscm; i1 0; indicators; influence; journal; logistics; logistics flows; management; method; model; parameters; supply; system
       cache: fumecheng-7718.pdf
  plain text: fumecheng-7718.txt

        item: #495 of 526
          id: fumecheng-7742
      author: Guvenc, Mehmet Ali; Bilgic, Hasan Huseyin; Mistikoglu, Selcuk
       title: IDENTIFICATION OF CHATTER VIBRATIONS AND ACTIVE VIBRATION CONTROL BY USING THE SLIDING MODE CONTROLLER ON DRY TURNING OF TITANIUM ALLOY (TI6AL4V)
        date: 2023
       words: 6167
      flesch: 54
     summary: Zaeh, M.F., Kleinwort, R., Fagerer, P., Altintas Y., 2017, Automatic tuning of active vibration control systems using inertial actuators, CIRP Annals - Manufacturing Technology, 66, pp. Magnetorheological (MR) and Electro-rheological (ER) fluids are among the systems commonly used in active vibration control applications.
    keywords: applications; chatter; control; cutting; data; fig; machining; system; tool; turning; vibration; vibration control
       cache: fumecheng-7742.pdf
  plain text: fumecheng-7742.txt

        item: #496 of 526
          id: fumecheng-7767
      author: Bakır, Mahmut; Akan, Şahap; Özdemir, Emircan
       title: REGIONAL AIRCRAFT SELECTION WITH FUZZY PIPRECIA AND FUZZY MARCOS: A CASE STUDY OF THE TURKISH AIRLINE INDUSTRY
        date: 2021
       words: 10367
      flesch: 60
     summary: Section 2 provides further information about the extant literature on regional airlines and aircraft selection criteria. Therefore, not only operational factors should be taken into consideration in regional aircraft selection, but these factors should also be evaluated together with passenger expectations.
    keywords: aircraft; aircraft selection; airline; criteria; decision; fuzzy; marcos; matrix; method; piprecia; regional; selection; step; study
       cache: fumecheng-7767.pdf
  plain text: fumecheng-7767.txt

        item: #497 of 526
          id: fumecheng-7786
      author: Fragassa, Cristiano
       title: LIGHTENING STRUCTURES BY METAL REPLACEMENT: FROM TRADITIONAL GYM EQUIPMENT TO AN ADVANCED FIBER-REINFORCED COMPOSITE EXOSKELETON
        date: 2021
       words: 7851
      flesch: 53
     summary: Force: the force of opposition to the movement must exclude the effect of gravity (weight force), the variation of intensity according to the arc of action (elastic force) and the dependence on the speed of execution (isokinetic force). It depends on the fact that the two layers of used UD, placed orthogonally, are equivalent to a layer of used BD. ▪ L3 vs. L2: when the fiber orientation is not aligned with the lines of force (L2), the displacement increases by 40%.
    keywords: aluminum; composite; design; equipment; fig; gym; layers; material; metal; steel; strength; stress; weight
       cache: fumecheng-7786.pdf
  plain text: fumecheng-7786.txt

        item: #498 of 526
          id: fumecheng-7816
      author: Karamaşa, Çağlar; Karabasevic, Darjan; Stanujkic, Dragisa; Kookhdan, Alireza Rezanezhad; Mishra, Arunodaya Raj; Ertürk, Mehmet
       title: AN EXTENDED SINGLE-VALUED NEUTROSOPHIC AHP AND MULTIMOORA METHOD TO EVALUATE THE OPTIMAL TRAINING AIRCRAFT FOR FLIGHT TRAINING ORGANIZATIONS
        date: 2021
       words: 11476
      flesch: 55
     summary: Zavadskas, E.K., Bausys, R., Juodagalviene, B., Sapranaviciene, I.G., 2017, Model for residential house element and material selection by neutrosophic MULTIMOORA method, Engineering Applications of Artificial Intelligence, 64, pp. For further research studies criteria related to training aircraft selection can be expanded and results can be compared to different multi-criteria decision-making methods.
    keywords: ahp; aircraft; approach; criteria; decision; fuzzy; making; method; multimoora; neutrosophic; selection; sets; training; training aircraft; ̃ �; � ̃; 𝛼 �; 𝛽 �; 𝜃 �
       cache: fumecheng-7816.pdf
  plain text: fumecheng-7816.txt

        item: #499 of 526
          id: fumecheng-7833
      author: Banerjee, Sudip; Sarkar, Pujan; Sahoo, Prasanta
       title: IMPROVING CORROSION RESISTANCE OF MAGNESIUM NANOCOMPOSITES BY USING ELECTROLESS NICKEL COATINGS
        date: 2022
       words: 6341
      flesch: 53
     summary: To enhance surface quality, sample surface should be polished properly. Study of anodic section is necessary to examine corrosion characteristics as anodic section mainly helps to understand transformation technique of material from sample surface
    keywords: 2wc; alloy; az31; coating; corrosion; electroless; fig; heat; magnesium; resistance; sample; surface
       cache: fumecheng-7833.pdf
  plain text: fumecheng-7833.txt

        item: #500 of 526
          id: fumecheng-7836
      author: Zhou, Wenjie; Yu, Dongliang; Wang, Yifan; Shi, Junlin; Gan, Bin
       title: RESEARCH ON THE FLUID-INDUCED EXCITATION CHARACTERISTICS OF THE CENTRIFUGAL PUMP CONSIDERING THE COMPOUND WHIRL EFFECT
        date: 2023
       words: 6784
      flesch: 54
     summary: Karaskiewicz, K., Szlaga, M., 2014, Experimental and numerical investigation of radial forces acting on centrifugal pump impeller, Archive of Mechanical Engineering, 61(3), pp. 445-454. 31. The changes of fluid-induced force with impeller eccentricity and the unsteady flow characteristics of the internal flow field of centrifugal pump under different flow conditions and rotation speeds are investigated, and the relationship between the fluid-induced force of the impeller and the internal flow field characteristics is discussed.
    keywords: characteristics; eccentricity; fig; flow; fluid; force; impeller; pressure; pump; volute
       cache: fumecheng-7836.pdf
  plain text: fumecheng-7836.txt

        item: #501 of 526
          id: fumecheng-7837
      author: Soori, Mohsen; Asmael, Mohammed
       title: MINIMIZATION OF DEFLECTION ERROR IN FIVE AXIS MILLING OF IMPELLER BLADES
        date: 2023
       words: 5455
      flesch: 50
     summary: Soori, M., Arezoo, B., Habibi, M., 2017, Accuracy analysis of tool deflection error modelling in prediction of milled surfaces by a virtual machining system, International Journal of Computer Applications in Technology, 55(4), pp. Cutting forces and cutting temperatures induce deflection errors in thin-walled structures such as impeller blades through machining operations.
    keywords: axis; blades; cutting; deflection; deflection error; error; fig; impeller; machining; milling; operations; tool
       cache: fumecheng-7837.pdf
  plain text: fumecheng-7837.txt

        item: #502 of 526
          id: fumecheng-79
      author: Li, Qiang; Pohrt, Roman
       title: MIXED AND BOUNDARY LUBRICATION IN ROLLING CONTACT: EXPERIMENT AND SIMULATION
        date: 2014
       words: 3042
      flesch: 57
     summary: [8] for asperity contacts. It has some major advantages in computational complexity compared to other methods that can simulate asperity contact.
    keywords: contact; fig; film; layer; lubrication; model; rolling; simulation; surfaces
       cache: fumecheng-79.pdf
  plain text: fumecheng-79.txt

        item: #503 of 526
          id: fumecheng-7904
      author: Bhattacharya, Shibaprasad; Chakraborty, Shankar
       title: PREDICTION OF RESPONSES IN A CNC MILLING OPERATION USING RANDOM FOREST REGRESSOR
        date: 2023
       words: 5767
      flesch: 52
     summary: Thus, modeling of a machining operation and prediction of the corresponding responses using a non-parametric machine learning technique with a small dataset is quite challenging, but the proposed RF regressor yields satisfactory results even with a small experimental dataset for CNC face milling operation. Decision tree regressor Being a highly unstable technique, a small change in the dataset may cause a significant change in the developed tree structure.
    keywords: decision; learning; machine; milling; number; operation; prediction; regressor; responses; training
       cache: fumecheng-7904.pdf
  plain text: fumecheng-7904.txt

        item: #504 of 526
          id: fumecheng-8001
      author: Hashemkhani Zolfani, Sarfaraz; Bazrafshan, Ramin; Akaberi, Parnian; Yazdani, Morteza; Ecer, Fatih
       title: COMBINING THE SUITABILITY-FEASIBILITY-ACCEPTABILITY (SFA) STRATEGY WITH THE MCDM APPROACH
        date: 2021
       words: 9942
      flesch: 53
     summary: Puška et al. used multi-criteria analysis methods for ranking project management programs. This study proposed a combined approach of SFA with MCDM methods in a real case study.
    keywords: alternatives; business; bwm; country; criteria; criterion; decision; feasibility; market; method; model; risk; sfa; step; strategy; study; table; target
       cache: fumecheng-8001.pdf
  plain text: fumecheng-8001.txt

        item: #505 of 526
          id: fumecheng-8029
      author: Yuan, Yongliang; Ren, Jianli; Wang, Zhenxi; Mu, Xiaokai
       title: DYNAMIC ANALYSIS OF THE RIGID-FLEXIBLE EXCAVATOR MECHANISM BASED ON VIRTUAL PROTOTYPE
        date: 2022
       words: 7056
      flesch: 64
     summary:                1 1 2 2 9 7 6 1 7 1 3 3 5 7 2 7 2 2 3 7 3 3 4 7 4 4 3 1 7 1 6 2 4 8 7 6 8 4 8 7 2 2 7 9 9 7 6 1 3 3 sin cos cos 2 2 ( ) ( ) ( ) ( ) ( ) 0 ( ) 0 2 cos t l E A F DF r l l Q DF E A J m l l m l l m l l k R R R k J k E A F DF J r r l DF E A                          2 1 2 1 2 4 43 2 ( ) 2 f f l E AE
    keywords: boom; dipper; dipper handle; excavator; fig; handle; model; rope; stress;  
       cache: fumecheng-8029.pdf
  plain text: fumecheng-8029.txt

        item: #506 of 526
          id: fumecheng-8045
      author: Tomków, Jacek; Landowski, Michał; Rogalski, Grzegorz
       title: APPLICATION POSSIBILITIES OF THE S960 STEEL IN UNDERWATER WELDED STRUCTURES
        date: 2022
       words: 4518
      flesch: 59
     summary: Moreover, the influence of heat input on the microstructure and hardness in different areas of underwater welded structures were investigated. Sun, K., Hu, Y., Shi, Y., Liao, B., 2020, Microstructure evolution and mechanical properties of underwater dry welded metal of high strength steel Q690E under different water depths, Polish Maritime Research, 27, pp.
    keywords: fig; haz; heat; input; specimen; steel; underwater; welding; wet
       cache: fumecheng-8045.pdf
  plain text: fumecheng-8045.txt

        item: #507 of 526
          id: fumecheng-8143
      author: Mišić, Dragan; Stojković, Miloš; Trifunović, Milan; Vitković, Nikola
       title: DETECTION AND HANDLING EXCEPTIONS IN BUSINESS PROCESS MANAGEMENT SYSTEMS USING ACTIVE SEMANTIC MODEL
        date: 2022
       words: 9324
      flesch: 48
     summary: Research shows that the management of process exceptions requires a lot of resources, it costs a lot [2], its success is critical In [16], the ontologies help define advice for users when creating new processes.
    keywords: activity; asm; concept; context; exceptions; fig; handling; model; new; process; scaffold; system
       cache: fumecheng-8143.pdf
  plain text: fumecheng-8143.txt

        item: #508 of 526
          id: fumecheng-8148
      author: Szwarc, Tomasz; Wróblewski, Włodzimierz; Borzęcki, Tomasz
       title: EXPERIMENTAL AND NUMERICAL STUDY OF THE IMPACT OF THE OIL TANK FILLING LEVEL ON THE AIRCRAFT SEPARATOR
        date: 2025
       words: 6010
      flesch: 58
     summary: Characteristic of free surface and oil fraction The performed simulations for different filling levels revealed that a free surface and a layered structure of oil fractions were formed in the tank. Oil flow through the separator vent was non-stationary.
    keywords: air; fig; filling; flow; gas; level; model; oil; oil level; oil tank; separator; tank; velocity
       cache: fumecheng-8148.pdf
  plain text: fumecheng-8148.txt

        item: #509 of 526
          id: fumecheng-8241
      author: Tavakoli Maleki, Arash; Azimi, Milad; Moradi, Samad
       title: ANALYTIC APPROXIMATE SOLUTION FOR NONLINEAR DYNAMIC MODELING OF THE ROTATING ELASTIC 2D BEAM WITH A SINGLE CRACK
        date: 2022
       words: 6161
      flesch: 59
     summary: Several analytical solutions have been presented for nonlinear vibration analysis of non-rotating structures. Ansari, R., Gholami, R., Rouhi, H., 2019, Geometrically nonlinear free vibration analysis of shear deformable magneto-electro-elastic plates considering thermal effects based on a novel variational approach, Thin-Walled Structures, 135, pp. 12-20.
    keywords: analysis; beam; nonlinear; rotating; u u; vibration
       cache: fumecheng-8241.pdf
  plain text: fumecheng-8241.txt

        item: #510 of 526
          id: fumecheng-8264
      author: Barman, Manik; Barman, Tapan Kumar; Sahoo, Prasanta
       title: TRIBO-MECHANICAL CHARACTERIZATION OF ENB ALLOY COATINGS: EFFECT OF HEAT-TREATMENT TEMPERATURE AND SODIUM BOROHYDRIDE CONCENTRATION
        date: 2025
       words: 6248
      flesch: 57
     summary: 5 XRD patterns of ENB coating in, (a) as-deposited, (b) deposited with 0.50 g/l NaBH4 and heat-treated, (c) deposited with 0.80 g/l NaBH4 and heat-treated, and (d) deposited with 1.10 g/l NaBH4 and heat-treated Crystallisation of ENB coatings starts just below 300°C of heat-treatment temperature ENB coatings also enhance the surface hardness of mild steel substrate
    keywords: boron; coatings; concentration; enb; hardness; heat; nabh4; surface; treatment; wear
       cache: fumecheng-8264.pdf
  plain text: fumecheng-8264.txt

        item: #511 of 526
          id: fumecheng-8274
      author: Vrsalović, Ladislav; Čatipović, Nikša; Gudić, Senka; Kožuh, Stjepan
       title: BENEFICIAL EFFECT OF CU CONTENT AND AUSTEMPERING PARAMETERS ON THE HARDNESS AND CORROSION PROPERTIES OF AUSTEMPERED DUCTILE IRON (ADI)
        date: 2025
       words: 5028
      flesch: 53
     summary: 6 Results of linear polarization measurements a) and potentiodynamic polarization measurements b) for ductile iron samples in 0.5M NaCl solution at 20°C Fig. 7 Results of linear polarization measurements a) and potentiodynamic polarization measurements b) for austempered ductile iron samples in 0.5M NaCl solution at 20°C a) b) 42 L. VRSALOVIĆ, N. ČATIPOVIĆ, S. GUDIĆ, S. KOŽUH In Figs. 6 a) and 7 a) it can be seen that the slope of the linear parts of the curves rises with the increase in the mass percentage of Cu in DI and ADI samples. Hence, the decrease of Q, with the increase of Cu content and heat treatment, leads to the corresponding increase in the thickness of the surface layer and additionally prevents iron corrosion at EOC.
    keywords: adi; austempering; content; corrosion; ductile; hardness; iron; properties; resistance; samples; surface
       cache: fumecheng-8274.pdf
  plain text: fumecheng-8274.txt

        item: #512 of 526
          id: fumecheng-83
      author: Tufegdžić, Milica; Trajanović, Miroslav; Vitković, Nikola; Arsić, Stojanka
       title: REVERSE ENGINEERING OF THE HUMAN FIBULA BY USING METHOD OF ANATOMICAL FEATURES
        date: 2014
       words: 2506
      flesch: 49
     summary: Creating 3D surface model of the human fibula The polygonal model of upper extremity of the fibula is intersected with the planes obtained by rotation of the plane passing through the mechanical axis of the bone and ACF. 5 3D surface model of the fibula We have created a polygonal model at 3D surface model with the aim of analyzing the differences between the RE model and the initial STL polygonal model.
    keywords: axis; engineering; extremity; fibula; fig; model; reverse; surface
       cache: fumecheng-83.pdf
  plain text: fumecheng-83.txt

        item: #513 of 526
          id: fumecheng-832
      author: Ul Haq, Asad; Djurdjanović, Dragan
       title: PRECEDENT-FREE FAULT LOCALIZATION AND DIAGNOSIS FOR HIGH SPEED TRAIN DRIVE SYSTEMS
        date: 2015
       words: 5344
      flesch: 44
     summary: Unfortunately, monitoring systems based on the classical framework are restricted in their diagnostic abilities, due to their reliance on fault models for these tasks. The entire process is based solely on models of normal behavior, thereby bypassing the need for fault models, which, as previously mentioned, is a major constraining factor in the applicability of traditional diagnostic methods.
    keywords: anomaly; behavior; detection; fault; localization; models; speed; subsystems; system; train
       cache: fumecheng-832.pdf
  plain text: fumecheng-832.txt

        item: #514 of 526
          id: fumecheng-8346
      author: Hasnain, Jafar; Satti, Hina Ghias; Sheikh, Mariam; Abbas, Zaheer
       title: STUDY OF DOUBLE SLIP BOUNDARY CONDITION ON THE OSCILLATORY FLOW OF DUSTY FERROFLUID CONFINED IN A PERMEABLE CHANNEL
        date: 2023
       words: 5981
      flesch: 67
     summary: 1 Re Q y Q y Q y Q yi t pu y t e C e C e Q Q e Q e i M = + + + + +   ( )17 18 11 12 3 17 4 18 20 11 21 121 , f Q y Q y Q y Q yi t f y y nf nf a C u e C Q e C Q e Q Q e Q Q e U = = = = + + +    ( ) ( )11 12 1 11 2 120,1 0 , Q y Q yi tw y y nf f aq Nu e C Q e C Q e k T T 17 18 11 12 1 3 7 2 3 7 19 20 21 22 1 172 2 2 2 2 1 8 11 7 8 7 11 12 7 8 7 12 23 1 18 24 19 20 1 11 21 1 12 25 2 17 26 2 18 27 19 20 2 11 21 , , , 1 , 1 , Q (1 ) (1 Q ), Q (1 Q ), Q (1 Q ), Q (1 Q ) Q ( Q Q Q Q C GrQ Q C GrQ Q Q Q Q Q Q Q Q Q Q Q Q Q S Q Q Q Q Q S Q Q Q Q Q Q e e Q Q e e         − − = = = = − − + − + = − = + − + − = + = + = + + + 2 12 24 26 23 27 22 27 24 25 3 4 23 25 22 26 23 25 22 26 1 Q ), . Q Q Q Q Q Q Q Q C C Q Q Q Q Q Q Q Q + − − = = − − Study of Double Slip Boundary Condition on the Oscillatory Flow of Dusty Ferrofluid Confined … 679 Fig.
    keywords: channel; flow; fluid; heat; slip; y q; − −
       cache: fumecheng-8346.pdf
  plain text: fumecheng-8346.txt

        item: #515 of 526
          id: fumecheng-8377
      author: Pajić, Vukašin; Andrejić, Milan; Kilibarda, Milorad
       title: PROCUREMENT OPTIMIZATION BY SELECTING EFFICIENT SUPPLIERS USING DEA-FUCOM-COCOSO APPROACH AND SOLVING ORDER ALLOCATION PROBLEM
        date: 2025
       words: 7818
      flesch: 56
     summary: [20] proposed a model for concurrent supplier selection model to minimize the purchasing cost and fuzzy quality loss considering process capability and assembled product specification. Key words: Procurement logistics, Supplier selection, Order allocation problem, FUCOM, CoCoSo 1. INTRODUCTION Procurement logistics is a segment of the supply chain that deals with the procurement of raw materials (products), inventory management, demand forecasting, selection of suppliers, tenders, etc.
    keywords: cocoso; criteria; dea; fucom; method; model; order; paper; problem; procurement; selection; supplier
       cache: fumecheng-8377.pdf
  plain text: fumecheng-8377.txt

        item: #516 of 526
          id: fumecheng-844
      author: Lazarević, Luka; Kovačević, Miloš; Popović, Zdenka
       title: RAIL TRAFFIC VOLUME ESTIMATION BASED ON WORLD DEVELOPMENT INDICATORS
        date: 2015
       words: 3425
      flesch: 54
     summary: However, application of CFS filter showed which groups of indicators are mostly correlated with rail traffic and which indicators can be used for traffic prediction. Two of the infrastructure indicators represent data about freight and passenger rail traffic (target values to predict).
    keywords: indicators; model; number; passenger; prediction; rail; traffic; transport
       cache: fumecheng-844.pdf
  plain text: fumecheng-844.txt

        item: #517 of 526
          id: fumecheng-86
      author: Jovanović, Dragan
       title: POTENTIAL STRAIN ENERGY SURFACES AT THE CRACK TIP VICINITY
        date: 2014
       words: 4074
      flesch: 63
     summary: Finally, I have showed the comparison of stress and potential strain energy surfaces, which are based on the relations from the literature. Relevant limitations and specifications of the method are pointed out while evaluating the best fitting curves and the best fitting three-dimensional surfaces of stress components and potential strain energy.
    keywords: crack; energy; strain;  ;  ;  ;  ;  ;  ;  
       cache: fumecheng-86.pdf
  plain text: fumecheng-86.txt

        item: #518 of 526
          id: fumecheng-887
      author: Vračar, Ljubomir; Milovančević, Miloš; Karanikić, Petra
       title: APPLICATION OF SMART MOBILE PHONES IN VIBRATION MONITORING
        date: 2015
       words: 3609
      flesch: 44
     summary: There is a great variety of different vibration sensors which are used for achieving results as accurate as possible. The purpose of the research presented in this paper is the development of the smart mobile phone application for vibration monitoring of pumping aggregate, based on Microchip’s microcontroller (MC).
    keywords: acceleration; condition; fig; frequency; machines; measuring; monitoring; pump; sensor; system; vibration
       cache: fumecheng-887.pdf
  plain text: fumecheng-887.txt

        item: #519 of 526
          id: fumecheng-92
      author: Vučković, Goran; Vukić, Mića; Stojiljković, Mirko; Simonović, Miloš
       title: SPLITTING THE TOTAL EXERGY DESTRUCTION INTO THE ENDOGENOUS AND EXOGENOUS PARTS OF THE THERMAL PROCESSES IN A REAL INDUSTRIAL PLANT
        date: 2016
       words: 4221
      flesch: 55
     summary: The total exergy destruction occurring in a component is not only due to the component itself (endogenous exergy destruction) but is also caused by the inefficiencies of the remaining system components (exogenous exergy destruction). A part of the exergy destruction within a system component is generally caused by the inefficiencies of the remaining system components (exogenous exergy destruction).
    keywords: component; destruction; exergy; exergy destruction; steam; system; water
       cache: fumecheng-92.pdf
  plain text: fumecheng-92.txt

        item: #520 of 526
          id: fumecheng-921
      author: Popov, Valentin L.; Psakhie, Sergey G.; Chernyavsky, Alexander G.
       title: FOREWORD
        date: 2015
       words: 588
      flesch: 32
     summary: Polymer materials for friction systems in vacuum technology, and,  System dynamics and tribology: needs of aerospace technologies. These problems have been discussed during the German-Russian Workshop on “Tribology in aerospace applications: damping, wear and structural dynamics in aerospace systems”, which was held at the Technische Universität Berlin October 6-8, 2014.
    keywords: aerospace; dynamics; systems
       cache: fumecheng-921.pdf
  plain text: fumecheng-921.txt

        item: #521 of 526
          id: fumecheng-94
      author: Milojević, Andrija P.; Pavlović, Nenad D.
       title: SOFTWARE FOR SYNTHESIS OF COMPLIANT MECHANISMS WITHOUT INTERSECTING ELEMENTS
        date: 2014
       words: 5896
      flesch: 47
     summary: The developed software intends to provide an easy-to-use tool for compliant mechanism design, which, we hope, will lead to novel solutions for today's engineering problems. In this paper the new software for synthesis of compliant mechanisms is described.
    keywords: compliant; design; displacement; elements; fig; gripper; inverter; mechanisms; software; synthesis
       cache: fumecheng-94.pdf
  plain text: fumecheng-94.txt

        item: #522 of 526
          id: fumecheng-942
      author: Mikhasev, Gennadi I.; Bosiakov, Sergei M.; Petrova, Lyudmila G.; Maisyuk, Marina M.
       title: FINITE-ELEMENT MODELLING OF THE TYMPANIC MEMBRANE RETRACTION POCKET UNDER NEGATIVE PRESSURE IN THE TYMPANIC CAVITY
        date: 2015
       words: 3268
      flesch: 55
     summary: The elastic modulus of the posterosuperior quadrant 0A1A2A3 has different values when modeling middle ear SSS for the normal and pathologically affected states of the pars tensa. Fig. 4 shows simulated deformations of the TM and middle ear ossicles for the standard pressure, pS = 20 Pa (pSPL = 120 dB), which is caused by the static pressure difference between the ear canal and the TC.
    keywords: ear; middle; pars; posterosuperior; pressure; tensa
       cache: fumecheng-942.pdf
  plain text: fumecheng-942.txt

        item: #523 of 526
          id: fumecheng-96
      author: Trifunović, Milan; Stojković, Miloš; Trajanović, Miroslav; Mišić, Dragan; Manić, Miodrag
       title: INTERPRETING THE MEANING OF GEOMETRIC FEATURES BASED ON THE SIMILARITIES BETWEEN ASSOCIATIONS OF SEMANTIC NETWORK
        date: 2014
       words: 4481
      flesch: 45
     summary: This implicit connection be- tween association members and context to which this association belongs is determined by the values of association parameters that are appropriate for given context (Fig. 2). c. ASM creates association between concepts CPTX and CPTN with the deter- mined values of association parameters.
    keywords: asm; association; concepts; context; cptn; cptx; parameters; type
       cache: fumecheng-96.pdf
  plain text: fumecheng-96.txt

        item: #524 of 526
          id: fumecheng-99
      author: Pavlović, Jovan; Jovanović, Miomir Lj.; Milojević, Andrija
       title: OPTIMAL SYNTHESIS OF A MANIPULATOR USING TWO COMPETITIVE METHODS
        date: 2014
       words: 4327
      flesch: 56
     summary: These methods use a fixed interval of indetermination (H), where the field of change of independent variables 1 2 3 4{ , , , }z z z z z is divided by the selected number of points equal to the number of sub-areas. D c b c D b            (22) Coordinates of linkage O4 : 2 2 12 23 12 23 1 1 23 12 4 1(1,2) 2 2 1 1 ( ) ( ) 2 2 2 X X X X c b Y Y X F D D          (23) 1 2 2 23 12 12 23 1 1 23 12 4 1(1,2) 2 2 1 ( ) ( ) 2 2 2 Y Y Y Y c b X X Y F D D         (24) Bucket tilt angle for the current value of arm slope β is computed as: 4 12 4 12 ( ) Y Y arctg X X      (25)
    keywords: function; mechanism; optimization; parameters
       cache: fumecheng-99.pdf
  plain text: fumecheng-99.txt

        item: #525 of 526
          id: fumecheng-991
      author: Miltenović, Aleksandar; Banić, Milan; Stamenković, Dušan; Milošević, Miloš; Tomić, Miša
       title: DETERMINATION OF FRICTION HEAT GENERATION IN WHEEL-RAIL CONTACT USING FEM
        date: 2015
       words: 3180
      flesch: 60
     summary: They have also presented methods for the calculation of contact temperatures using Blok’s flash temperature formula. Determination of generated friction heat in the contact of wheel and rail is important for understanding the damage mechanisms on these two bodies such as wear.
    keywords: coefficient; friction; rail; speed; wheel
       cache: fumecheng-991.pdf
  plain text: fumecheng-991.txt

        item: #526 of 526
          id: fumecheng-9954
      author: Shugurov, Artur R.; Nikonov, Anton Y.; Dmitriev, Andrey I.
       title: THE EFFECT OF ELECTRON-BEAM TREATMENT ON THE DEFORMATION BEHAVIOR OF THE EBAM TI-6AL-4V UNDER SCRATCHING
        date: 2022
       words: 5541
      flesch: 57
     summary: The CEBS treated EBAM Ti-6Al-4V sample also primarily demonstrates peaks of the α-Ti phase in the XRD pattern, but (100) preferred orientation became slightly less pronounced. The microstructure of the as-built and CEBS treated EBAM Ti–6Al–4V samples was investigated using an Axiovert 40 Mat optical microscope (Carl Zeiss, Göttingen, Germany).
    keywords: bcc; beam; cebs; ebam; electron; fig; phase; samples; scratch; scratching; ti-6al-4v; titanium
       cache: fumecheng-9954.pdf
  plain text: fumecheng-9954.txt