id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
fis-1738	Susmel, L.; Hattingh, D. G.; James, M. N.; Maggiolini, E.; Tovo, R.	Designing aluminium friction stir welded joints against multiaxial fatigue	2016	8	.pdf	application/pdf	4113	208	51	The validation exercise carried out using the experimental results have demonstrated that the MWCM applied in terms of nominal stresses, notch stresses, and also the Point Method is accurate in predicting the fatigue lifetime of the tested FS welded joints, with its use resulting in life estimates that fall within the uniaxial and torsional calibration scatter bands. in terms of nominal stresses referred to the annular section of the parent tube, where: BR=nom,a/nom,a is the ratio between the amplitudes of the axial and torsional nominal stress, R is the nominal load ratio,  is the out-of-phase angle, k is the negative inverse slope, A and A are the amplitudes of the axial and torsional endurance limits extrapolated at N=2106 cycles to failure, and T is the scatter ratio of the amplitude of the endurance limit for 90% and 10% probabilities of survival.	cache/fis-1738.pdf	txt/fis-1738.txt