id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
fis-1749	Mazur, I.; Koinov, T.	Quality Control system for a hot-rolled metal surface	2016	10	.pdf	application/pdf	4798	210	47	The experience of introduction of the system of control of quality of surface on the uninterrupted wide strip mill of hot-rolling and also its further use showed that automatic detection and classification of surface defects in the end-to-end technology of production of sheet products make it possible: to secure a provision of the requirements of consumers on the quality of the surface of the rolled metal with the submission of electronic passport; to provide 100 % control of surface of all flat bars rolled on the mill for the detection of defects of pouring and hot rolling; to provide automated systems of subsequent process stages by the information about the defects of surface of hot-rolled metal; to carry out monitoring of quality of surface in the adjacent process stages; to carry out an audit of the existing technologies of rolled metal production and develop the actions on their improvement. A presence of drops of water on the upper side of rolled metal was one more problem for the detection of surface defects on the upper side of rolled metal and also a presence of water splashes and vapor between the flat bar and upper video.	cache/fis-1749.pdf	txt/fis-1749.txt