id	author	title	date	pages	extension	mime	words	sentence	flesch	summary	cache	txt
fis-2626	Fountas, Nikolaos; Koutsomichalis, Angelos; Kechagias, John; Vaxevanidis, Nikolaos	Multi-response optimization of CuZn39Pb3 brass alloy turning by implementing Grey Wolf algorithm	2019	11	.pdf	application/pdf	6873	425	51	Experiment n (rpm) f (mm/rev) a (mm) Ra (μm) Rt (μm) Fc (N) 1 800 0.10 1.5 7.34 37.7 200 2 800 0.10 1.0 4.33 25.6 160 3 800 0.10 0.5 6.02 36.5 090 4 800 0.18 1.5 4.62 25.2 130 5 800 0.18 1.0 4.23 21.1 120 6 800 0.18 0.5 5.52 34.5 080 7 800 0.33 1.5 7.14 33.8 165 8 800 0.33 1.0 8.51 42.7 160 9 800 0.33 0.5 8.02 37.5 100 10 1600 0.10 1.5 1.44 13.2 160 11 1600 0.10 1.0 1.78 11.5 130 12 1600 0.10 0.5 2.03 12.4 085 13 1600 0.18 1.5 4.24 22.2 170 14 1600 0.18 1.0 3.94 19.0 150 15 1600 0.18 0.5 4.00 21.7 100 16 1600 0.33 1.5 5.13 30.7 190 17 1600 0.33 1.0 5.26 26.8 150 18 1600 0.33 0.5 5.28 28.5 110 Table 2: Cutting conditions and measured values of surface roughness parameters and main cutting force. Main cutting force seems to increase in general when using high feed rate values however when applying depth of cut equal to 1.0 mm both the second and the third feed rate levels maintain the result of Fc.	cache/fis-2626.pdf	txt/fis-2626.txt