Microsoft Word - numero_73_art_07_5441.docx N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 88 A study on the crack presence effect on dynamical behavior of higher- order Quasi-3D composite steel-polymer concrete box section beams via DQFEM Nassim Laouche Department of Planning and Hydraulic Engineering, Higher National School of Hydraulics, Blida, Algeria n.laouche@ensh.dz, https://orcid.org/0000-0002-1376-5032 Ahmed Saimi Mechanical engineering Department, Faculty of Science and Technology, University Belhadj Bouchaib, Ain Temouchent, Algeria ahmed.saimi@univ-temouchent.edu.dz, https://orcid.org/0000-0002-3722-2526 Ismail Bensaid IS2M Laboratory, Mechanical engineering Department, Faculty of Technology, University Abou Beckr Beklaid, Tlemcen, Algeria ismail.bensaid@univ-tlemcen.dz, https://orcid.org/0000-0003-4316-0648 Mouloud Dahmane Department of Planning and Hydraulic Engineering, Higher National School of Hydraulics, Blida, Algeria m.dahmane@ensh.dz, https://orcid.org/0009-0001-2032-2141 Hassen Ait Atmane Department of Civil Engineering, Faculty of Civil Engineering and Architecture, University Hassiba Benbouali, Chlef, Algeria aitatmane2000@yahoo.fr, https://orcid.org/0000-0001-7248-2975 KEYWORDS. Quasi 3D beam theory, DQFEM, free vibration, critical buckling, composite beam, crack. Citation: Laouche, N., Saimi, A., Bensaid, I., Dahmane, M., Ait Atmane, H., A study on the crack presence effect on dynamical behavior of higher-order Quasi-3D composite steel-polymer concrete box section beams via DQFEM, Fracture and Structural Integrity, 73 (2025) 88-107. Received: 28.03.2025 Accepted: 09.05.2025 Published: 11.05.2025 Issue: 07.2025 Copyright: © 2025 This is an open access article under the terms of the CC-BY 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 89 INTRODUCTION he study of composite beams has become increasingly significant due to their extensive applications in modern engineering structures, including bridges, aerospace systems, and machine tools [1]. Composite beams, particularly those integrating steel and polymer concrete, are pivotal in modern engineering applications due to their superior mechanical properties, such as high strength-to-weight ratios and enhanced durability [2]. Steel-polymer concrete composite systems leverage the ductility of steel and the compressive strength of polymer concrete, making them ideal for infrastructure, bridges, and high-performance structures [3]. However, the presence of cracks arising from material defects, fatigue, or external loads can significantly compromise their dynamic and stability characteristics, necessitating a thorough understanding of crack-induced effects on structural behavior [4]. The dynamic and buckling responses of composite beams have been extensively studied using various beam theories. Traditional models, such as the Timoshenko beam theory, have been employed to analyze the vibration behavior of steel- concrete composites, capturing shear deformation and rotational inertia effects. like the work of [5] who presented a solution of the problem of free vibrations of steel–concrete composite beams using three analytical models describing the dynamic behavior based on Euler beam theory, and on Timoshenko beam theory. [6] studied the dynamic behavior of Steel–Concrete Composite Beams Using the Euler-Bernoulli Beam Model via classical finite elements method and did also the experimental study. However, these models often simplify through-thickness deformations, limiting their accuracy for thick or heterogeneous sections. Advanced theories, including quasi-3D formulations, address this limitation by incorporating higher-order displacement fields, thereby improving the representation of complex stress distributions in multi-layered composites [7]. Concurrently, the Differential Quadrature Finite Element Method (DQFEM) has emerged as a powerful tool for solving structural mechanics problems, offering high computational efficiency and accuracy, particularly for beams with variable geometries or material properties. [8] studied the dynamic behavior of rotating shaft based on Euler Bernoulli beam theory via DQFEM. [9] proposed the DQFEM for the free vibration analysis of thin plates. Recent advances in composite structures have highlighted their potential for improved mechanical and dynamic performance. Studies on porous sandwich plates show that foam cores can enhance vibration damping and natural frequencies [10]. At smaller scales, modified couple stress theory reveals size-dependent effects in functionally graded microplates and piezoelectric nano shells [11, 12]. Isogeometric and meshfree methods enable accurate modeling of complex geometries in active laminated shells [13, 14], while nonlinear buckling analyses demonstrate the influence of thermal- electromechanical loads on stability [15]. Additionally, surface treatments of carbon fibers have been shown to simultaneously improve damping and strength in CFRPs [16]. Building on these findings, this work investigates the interplay of material design, microstructural effects, and numerical modeling to optimize multifunctional composites. Despite these advancements, existing studies on cracked composite beams remain limited. Most analyses focus on homogeneous or functionally graded materials. [17] investigated the Effect of crack presence on the dynamic and buckling responses of bidirectional functionally graded beams based on quasi-3D beam model and differential quadrature finite element method. Also another same study on bidirectional functionally graded microbeams with presence of crack by [18] was conducted. [19] investigated the Modal analysis of cracked functionally graded material beam with piezoelectric layer. [20] conducted a modal analysis of cracked functionally graded Timoshenko beam. [21] studied the crack’s effect on the natural frequencies of bi-directional functionally graded beam. [22] studied an analytical model of longitudinal fracture in two-dimensional functionally graded beam with clamped free boundary conditions configurations with taking into account the non-linear behavior of material. [23] contributed to the analysis of the behavior of pre-cracked reinforced concrete composite beams with carbon fiber fabric and epoxy resin. [4] investigated the dynamic response of Euler–Bernoulli imperfect functionally graded (FG) cracked beams on Winkler-elastic foundation, considering pinned–pinned boundary condition. [24] investigated a numerical simulation on the effect of flexural crack on plain concrete beam failure mechanism. Furthermore, the simultaneous consideration of dynamic and buckling behaviors under crack-induced perturbations is underexplored, particularly for steel-polymer concrete systems. This gap underscores the need for a refined approach that integrates crack effects into a comprehensive mechanical framework. In this study, a refined quasi-3D beam theory is employed to investigate the dynamic and critical buckling behavior of steel- polymer concrete composite beams with cracks in both the inner concrete core and outer steel box. The governing equations are derived using DQFEM combined with Lagrange’s principle, accounting for slenderness ratios and beam thicknesses. The model’s accuracy is validated against numerical and experimental results from literature, ensuring robustness. By systematically analyzing natural frequencies and critical buckling loads under varying crack depths and locations, this research provides critical insights into the performance of cracked composite beams. The findings aim to inform design guidelines for optimizing material-based structures, enhancing safety and reliability in engineering applications. T N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 90 FORMULATION AND THEORIES Steel-Polymer Concrete Beam Model he concept of the steel-polymer concrete beam combines the synergistic properties of steel and polymer concrete to achieve enhanced mechanical performance, including stiffness, vibration energy dissipation, and dynamic adaptability. The beam structure includes a steel profile of length L with a square cross-section of thickness × width (h × b) and 𝑒 wall thickness, filled with polymer concrete (Fig. 1). The bonding between the steel layer and the inner polymer concrete core is assumed to be perfect, implying no relative slip or separation at the interface under applied loads. The polymer concrete core is composed of epoxy resin and mineral fillers of varying grain sizes, including ash, fine sand, medium gravel, and coarse gravel, ensuring optimized density and strength distribution [6]. By controlling the arrangement and degree of filling, the dynamic properties of such composite beams can be tailored to meet specific structural requirements. Figure 1: Box-Section Beam with Composite Infill. Quasi-3D Beam Model This study employs a higher-order quasi-3D beam formulation, where the displacement distribution at any point along the beam is represented as follows:                              b s b s z dw x t dw x t u x z t u x t z f z dx dx u x z t w x t w x t f z w x t 1 1 3 2 , , , , , , , , , , (1) This theory posits that the transverse displacement is categorized into three distinct components: the bending bw , shear sw and normal displacement zw . Here, u represents the axial displacement along the x-axis. The shear shape function employed in this framework is derived from a third-order polynomial shear deformation beam theory, as established by [7], using Eqn. (2), where     f z f z2 11 '                         z f z z cosh cos h1 54h 5 3 5 sinh 5 4 8 20 8 (2) The formula for strain energy U , according to these theories, is as follows:      el ij ij A U dAdx 0 1 2 (3) Hence 𝜎 and 𝜀 represents the stress tensor and the strain tensor respectively which are defined by the following equations: T N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 91                              b s xx zz z zs xz d w d wdu du z f dx dx dx dx dfdw w dz dz dwdwdu dw f dz dx dx dx 2 2 12 2 2 2 1 1 2 2 (4)                           xx xx zz xz xz zz zz xx 2 2 2 (5) where       E 2 1 (6)          E 1 1 2 (7) Hence 𝜇 and 𝜆 are the Lame constants, and 𝜈 is the Poisson's ratio. The substitution of Eqns. (4)-(7) in Eqn. (3) give:                                         el b s b s b s b s z z z z z zs s d w d w d w d w d wdu du du U I I I I dx dx dxdx dx dx dx dx d w d w d wdu I I w I w I w I w dxdx dx dx dw dwdw dw I dx dx dx dx 22 2 2 2 2 2 1 2 3 4 52 2 2 2 2 0 22 2 2 2 6 7 8 9 102 2 2 22 11 1 2 2 2 2 2 2 2 2   dx (8) with:                                                                   s s h s s c s c s h h e s h e df I b z f zf z f dz dz df b e z f zf z f dz dz 22 2 2 2 1:7 1 1 1 2 22 2 2 2 1 1 1 2 2 1, , , , , , 2 2 1, , , , , , (9)                                               s s hh e s c s s h h e df df I b z f dz b e z f dz dz dz 22 2 2 8:10 1 1 2 2 1, , 2 1, , (10) N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 92                                           s s hh e s c s s h h e I b f dz b e f dz 22 2 2 11 2 2 2 2 2 (11) The Kinetic Energy 𝑇 can be written as:                               el b s b s b b s b s s z b z s z dw dw dw dw dw T J u w w w w J u J u J J dx dx dx dx dx dw J J w J w w w w dx dx 2 2 2 2 1 2 3 4 5 0 2 2 6 7 8 1 2 2 2 2 2 2                  (12) Hence the mass moments of inertia: (13) with s , and c indicate density for steel box layer and inner composite concrete respectively. The potential energy associated with the beam under an externally applied axial load is expressed as follows:                    el b s b s cr dw dw dw dw V N dx dx dx dx dx 2 2 0 1 2 2 (14) Cracked element In this study, the stiffness reduction of the beam is modeled as a cross-sectional reduction correlated with the progression of crack depth [21], as depicted in Fig. 2. Two distinct crack types are analyzed: a crack in the steel box layer and a crack in the composite polymer concrete core, these cracks are assumed to be independent. The crack depths for these components are denoted as  s h a"0 " 2 (steel box layer) and        c s h a e"0 " 2 (composite core), respectively. To account for these degradation mechanisms, the coefficients in Eqns. (9)-(13) are formulated as follows (“sc” index mean steel box crack and “cc” index mean composite polymer concrete core crack):                                                  s s s h a s ssc h h e s h e df I b z f zf z f dz dz df b e z f zf z f dz dz 22 2 2 2 1:7 1 1 1 2 22 2 2 2 1 1 1 2 2 1, , , , , , 2 1, , , , , , (15)                                                    s s h s h h e c s s h e J b z f zf z f f f dz b e z f zf z f f f dz 2 2 2 2 1:8 1 1 1 2 2 2 2 2 2 2 1 1 1 2 2 2 1, , , , , , , 2 1, , , , , , , N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 93                                 s s s h ha e s ssc h h e df df I b z f dz b e z f dz dz dz 2 2 2 2 8:10 1 1 2 2 1, , 2 1, , (16)                             s s s h ha e s ssc h h e I b f dz b e f dz 2 2 2 2 11 2 2 2 2 2 (17)                                s c s h e a c c scc h e df I b e z f zf z f dz dz 22 2 2 2 1:7 1 1 1 2 2 2 1, , , , , , (18)                      s c s h e a c scc h e df I b e z f dz dz 2 2 8:10 1 2 2 1, , (19)                    s c s h e a c scc h e I b e f dz 2 2 11 2 2 2 (20) (a) (b) Figure 2: Cross section of the Cracked element. (a) (𝑎 crack depths of steel box layer), (b) (𝑎 crack depths composite polymer concrete core). Figure 3: Crack position according to the mesh elements. N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 94 Since there are two types of cracks (Fig. 3), that of steel outer layer and that of inner composite polymer concrete. The crack location is indexed with 𝐿 and 𝐿 , where 𝐿 and 𝐿 represents the crack location from the left end of the beam for the steel outer layer and the inner composite polymer concrete respectively. 𝑙 is the length of the mesh element. DQFEM formulation To represent our beam, we assume the shape functions take the form described in Eqn. (19) [9]:                             N N i i b i bi i i N N s i si z i zi i i u x L x u w x L x w w x L x w w x L x w 1 1 1 1  ,  ,  (21) This formulation employs iL to denote the Lagrange polynomial, while   ui iu x ,   wbi b iw x ,   wsi s iw x and  zi z iw w x represent the nodal displacements at the Gauss-Lobatto quadrature points within the differential quadrature (DQ) finite element framework of the beam. The nth-order derivative of a field variable f (x) at a discrete point ix is approximated as follows:                i n N n ij jn jx f x t A f x t i N x 1 , , 1, 2,3, .., (22) In this context,  n ijA denotes the weighting coefficient associated with the nth order derivative approximation.  n ijA is derived as follows: if n = 1, so                        i ij i j j n ii ij j j i M x A i j i j N x x M x A A i N 1 1 1 1, ,   , 1, 2, , 1, 2, , (23)                  N N i i k j j k k k i k k i M x x x M x x x 1, 1, ,    (24) The Gauss-Lobatto quadrature rule, which possesses a degree of precision n2 3 for a function f(x) defined within the interval [−1,1], is expressed as follows:       N j j j f x dx C f x 1 11 (25)                   N j N j C C C j N N N N N P x 1 2 1 2 2 ,             1, 1 1 (26) jx corresponds to the (j−1)-th root of the first derivative of the Legendre polynomial  N 1 P x . To achieve fast convergence and high accuracy, a denser distribution of points near the boundaries is essential. Therefore, the sampling points are chosen based on the distribution of nodes in the Gauss–Lobatto grid and solved via Newton-Raphson iteration method. N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 95       j j x N 1 cos 1 (27) The relation between 𝑢 and 𝑢, 𝑤 and 𝑤 is defined using rule DQ [8]:  b s z b s zu Qu w Qw, , , ,,      (28) where                                           N N N N N N N N N A A A A A Q A A A A A 1 1 1 1 1 1,1 1,2 1,3 1, 1 1, 1 1 1 1 1 ,1 ,2 ,3 , 1 , 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1            (29) Utilizing the DQFEM, by substituting Eqns. (21-29) into Eqns. (8, 12, 14) and employing Lagrange’s principle, we derive the subsequent elementaries matrixes. The element mass matrix:                                                              T T T T e T e T e T T e b T T e e s T e T T e s T e T e M J Q CQ M J Q CA Q M J Q CA Q M J Q CG J Q A CA Q M M J Q CG J Q A CA Q M J Q CQ M J Q G J Q A CA Q M J Q CQ M J Q CQ 111 (1) 212 (1) 313 (1) (1) 1 522 (1) (1) 1 423 824 (1) (1) 1 633 834 744                  (30) The element strain matrix: N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 96                                                     T T T T T T T T T e T e T e T e T T e cr e T T e cr T e K I Q A CA Q K I Q A CA Q K I Q A CA Q K I Q A CQ K I Q A CA Q N Q A CA Q K K I Q A CA Q N Q A CA Q K I Q A (1) (1) 111 (1) ( 2 ) 212 (1) ( 2 ) 313 (1) 814 ( 2) ( 2 ) (1) (1) 522 ( 2) ( 2 ) (1) (1) 423 ( 2 924                                                 T T T T T T T T T T e cr T T e T T e CQ K I Q A CA Q I Q A CA Q N Q A CA Q K I Q A CQ I Q A CA Q K I Q CQ I Q A CA Q ) ( 2 ) ( 2 ) (1) (1) (1) (1) 6 1133 ( 2) (1) (1) 10 1134 (1) (1) 7 1144 (31) The outer steel layer cracked element strain matrix:                                                T SC SC T SC SC T SC SC T SC SC T SC SC SC T SC SC T e T e T e T e T e e T e K I Q A CA Q K I Q A CA Q K I Q A CA Q K I Q A CQ K I Q A CA Q K K I Q A CA Q K (1) (1) 111 (1) ( 2 ) 212 (1) ( 2 ) 313 (1) 814 ( 2) ( 2 ) 522 ( 2) ( 2 ) 423                                                    T SC SC T T SC SC SC T T SC SC SC T SC SC SC T e T T e T T e T T e I Q A CQ K I Q A CA Q I Q A CA Q K I Q A CQ I Q A CA Q K I Q CQ I Q A CA Q ( 2 ) 924 ( 2 ) ( 2 ) (1) (1) 6 1133 ( 2) (1) (1) 10 1134 (1) (1) 7 1144 (32) The inner core cracked element strain matrix: N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 97                                                T CC CC T CC CC T CC CC T CC CC T CC CC CC T CC CC T e T e T e T e T e e T e K I Q A CA Q K I Q A CA Q K I Q A CA Q K I Q A CQ K I Q A CA Q K K I Q A CA Q K (1) (1) 111 (1) ( 2 ) 212 (1) ( 2 ) 313 (1) 814 ( 2 ) ( 2 ) 522 ( 2 ) ( 2 ) 423                                                    T CC CC T T CC CC CC T T CC CC CC T CC CC CC T e T T e T T e T T e I Q A CQ K I Q A CA Q I Q A CA Q K I Q A CQ I Q A CA Q K I Q CQ I Q A CA Q ( 2 ) 924 ( 2 ) ( 2 ) (1) (1) 6 1133 ( 2 ) (1) (1) 10 1134 (1) (1) 7 1144 (33) The interval [-1, 1] is the only valid range for all kinds of node distributions in differentiation and quadrature. Therefore, the differential and quadrature matrices need to be adjusted as follows in order to put them into practice.          e e e l C C A A A A l l 1 1 2 2 2 2 4 ,         ,       2 (34) el designate the beam element length. The cracked element is introduced during the assembly step of the total strain matrix, so as to replace the strain matrix of the uncracked element with that of the cracked element. This substitution makes it possible to obtain the total strain matrix of the system as showed in Fig. 4. Figure 4: Global strain matrix with and without cracks The global equation is as follow: N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 98                      b s z u w K w w 2 M 0 (35) DISCUSSION OF RESULTS beam with box shape section inner composite material and metal as outer material shown in Fig. 1, is studied in this section. The material properties for the outer material (Steel): Young's modulus steelE GPa210  , a mass density  steel kg m37812  / , Poisson's ratio  steel 0.28 . The inner material used in this study is a composite polymer concrete [6] : Young's modulus concreteE GPa17.2  , a mass density  concrete kg m32200  / , Poisson's ratio  concrete 0.20 . In order to examine the current models, a comparative search is first carried out with the literature (Tab. 1), for a beam made from a steel profile measuring L mm1000  in length, featuring a square cross-section with dimensions of thickness h mm70  , and a width b mm70  and a wall thickness of se mm3  , which is internally filled with polymer concrete. Model Experimental [6] FEM. TBT [6] DQFEM. Q3D DQFEM. TBT DQFEM. EBT 1 339 338 340 337 352 2 899 915 905 880 962 3 1669 1755 1659 1618 1863 4 2572 2833 2595 2495 3027 5 3589 4124 3605 3471 3957 Table 1: Natural frequencies (Hz) comparison with literature. Tab. 1 shows the natural frequencies of the composite beam predicted by the DQFEM-Q3D model closely match experimental results (≤1.5% deviation), validating its accuracy. In contrast, the frequencies obtained in this study for classical beam theories show limitations: Timoshenko beam theory (TBT) underestimates higher-mode frequencies (e.g., Mode 5: 3471 Hz vs. experimental 3589 Hz), while Euler Bernoulli beam theory (EBT) overestimates them significantly (e.g., Mode 5: 3957 Hz, 10.3% error). The literature’s FEM model via TBT also overestimates higher modes (e.g., Mode 4: 2833 Hz vs. experimental 2572 Hz). These results confirm that the quasi-3D theory via DQFEM, which accounts for shear and material complexity, outperforms simplified models, making it ideal for dynamic analysis of composite beams. The impact of the depth of the crack s sa a h2 / ,       c c s h a a e2 / 2 and location s sl L L  / , c cl L L  / on the frequencies and the critical buckling is analyzed, where sL and cL represents the crack location from the left end of the beam for the steel outer layer and the inner composite polymer concrete respectively. To facilitate ease of use in the parametric study, the nondimensional parameters outlined below are employed for all results presented in Tables and Figures. The frequency parameter ( ):   s s L h E 2 (36) The Critical buckling load parameter ( crN ): A N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 99  cr cr s N L N E bh 2 3 12 (37) In the following tables, the results are presented for different boundary conditions: Simply-Supported-Simply-Supported (S-S), Clamped-Clamped (C-C), and Clamped-Free (C-F). These boundary conditions represent distinct support configurations that significantly influence the dynamic behavior of the beam, including its natural frequencies and critical buckling loads. Frequency parameter Non-dimensional crack depth sa  0 0.25 0.5 0.75 1 S-S 1 2.6711 2.6433 2.6350 2.6287 2.6251 2 10.3727 10.0768 9.9909 9.9281 9.8922 3 22.3181 21.5775 21.3750 21.2285 21.1440 C-C 1 5.8866 5.8574 5.8494 5.8430 5.8386 2 15.6187 15.5544 15.5360 15.5214 15.5111 3 28.5679 28.0199 27.8555 27.7268 27.6430 C-F 1 0.9582 0.9127 0.8995 0.8897 0.8838 2 5.8362 5.8118 5.8047 5.7989 5.7945 3 15.6695 15.5780 15.5440 15.5103 15.4799 Table 2: Effects of the steel outer layer crack depth sa , where sl 0.15 , on the frequency parameter. (uncracked inner core composite polymer concrete). Critical buckling parameter Non-dimensional crack depth sa  0 0.25 0.5 0.75 1 S-S crN 1 3.5259 3.4488 3.4257 3.4084 3.3980 crN 2 5.9663 4.7154 4.5529 4.3818 4.3449 crN 3 5.9709 4.7344 4.5582 4.4020 4.3684 C-C crN 1 5.9725 4.7158 4.5531 4.3818 4.3449 crN 2 5.9726 4.7343 4.5581 4.4020 4.3684 crN 3 5.9914 5.9572 5.9027 5.8018 5.7767 C-F crN 1 0.8784 0.8134 0.7946 0.7805 0.7722 crN 2 3.0722 3.0662 3.0646 3.0633 3.0626 crN 3 5.9723 4.7151 4.5527 4.3816 4.3447 Table 3: Effects of the steel outer layer crack depth sa , where sl 0.15 , on the critical buckling parameter. (uncracked inner core composite polymer concrete). N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 100 Frequency parameter Non-dimensional crack location sl  0.15 0.25 0.35 0.55 0.85 S-S 1 2.6398 2.6058 2.5749 2.5568 2.6398 2 10.0401 9.9588 10.1158 10.3264 10.0401 3 21.4903 21.9814 22.2333 21.6440 21.4903 C-C 1 5.8540 5.8731 5.7957 5.7233 5.8540 2 15.5466 15.1812 15.1895 15.5170 15.5466 3 27.9505 27.9649 28.4982 27.7916 27.9505 C-F 1 0.9071 0.9219 0.9342 0.9506 0.9580 2 5.8088 5.8142 5.7110 5.5769 5.8063 3 15.5645 15.1540 15.2095 15.5278 15.3165 Table 4: Effects of the steel outer layer crack location sl , where sa 0.35 , on the frequency parameter. (uncracked inner core composite polymer concrete) Critical buckling parameter Non-dimensional crack location sl  0.15 0.25 0.35 0.55 0.85 S-S crN 1 3.4389 3.3468 3.2662 3.2210 3.4389 crN 2 4.6609 4.6615 4.6620 4.6623 4.6609 crN 3 4.6686 4.6685 4.6685 4.6684 4.6686 C-C crN 1 4.6612 4.6610 4.6608 4.6606 4.6612 crN 2 4.6684 4.6684 4.6685 4.6685 4.6684 crN 3 5.9447 5.9370 5.9354 5.9351 5.9447 C-F crN 1 0.8054 0.8122 0.8212 0.8431 0.8724 crN 2 3.0655 3.0678 3.0700 3.0721 3.0665 crN 3 4.6607 4.6608 4.6607 4.6600 4.6598 Table 5: Effects of the steel outer layer crack location sl , where sa 0.35 , on the critical buckling parameter. (uncracked inner core composite polymer concrete). Frequency parameter Non-dimensional crack depth ca  0 0.25 0.5 0.75 1 S-S 1 2.6711 2.6702 2.6695 2.6689 2.6684 2 10.3727 10.3630 10.3550 10.3487 10.3440 3 22.3181 22.2927 22.2720 22.2556 22.2435 C-C 1 5.8866 5.8854 5.8844 5.8834 5.8826 2 15.6187 15.6162 15.6140 15.6121 15.6104 3 28.5679 28.5492 28.5334 28.5205 28.5104 C-F 1 0.9582 0.9567 0.9555 0.9545 0.9538 2 5.8362 5.8352 5.8342 5.8334 5.8327 3 15.6695 15.6660 15.6627 15.6597 15.6568 Table 6: Effects of the inner core composite polymer concrete crack depth ca , where cl 0.15 , on the frequency parameter. (uncracked steel outer layer) N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 101 Critical buckling parameter Non-dimensional crack depth ca  0 0.25 0.5 0.75 1 S-S crN 1 3.5259 3.5236 3.5216 3.5200 3.5188 crN 2 5.9663 5.9565 5.9265 5.8621 5.7654 crN 3 5.9709 5.9676 5.9423 5.8840 5.8059 C-C crN 1 5.9725 5.9681 5.9386 5.8673 5.7672 crN 2 5.9726 5.9684 5.9437 5.8858 5.8069 crN 3 5.9914 5.9841 5.9778 5.9764 5.9760 C-F crN 1 0.8784 0.8763 0.8746 0.8732 0.8722 crN 2 3.0722 3.0720 3.0718 3.0717 3.0716 crN 3 5.9723 5.9681 5.9386 5.8673 5.7672 Table 7: Effects of the inner core composite polymer concrete crack depth ca , where cl 0.15 , on the critical buckling parameter. (uncracked steel outer layer). Frequency parameter Non-dimensional crack location cl  0.15 0.25 0.35 0.55 0.85 S-S 1 2.6699 2.6686 2.6673 2.6666 2.6699 2 10.3596 10.3557 10.3619 10.3704 10.3596 3 22.2839 22.3025 22.3128 22.2896 22.2839 C-C 1 5.8850 5.8859 5.8829 5.8800 5.8850 2 15.6153 15.6008 15.6001 15.6129 15.6153 3 28.5425 28.5415 28.5621 28.5346 28.5425 C-F 1 0.9562 0.9568 0.9573 0.9579 0.9582 2 5.8348 5.8351 5.8312 5.8260 5.8350 3 15.6647 15.6509 15.6522 15.6632 15.6564 Table 8: Effects of the inner core composite polymer concrete crack location cl , where ca 0.35 , on the frequency parameter. (uncracked steel outer layer). Critical buckling parameter Non-dimensional crack location cl  0.15 0.25 0.35 0.55 0.85 S-S crN 1 3.5227 3.5193 3.5160 3.5140 3.5227 crN 2 5.9477 5.9501 5.9515 5.9525 5.9477 crN 3 5.9620 5.9574 5.9552 5.9539 5.9620 C-C crN 1 5.9613 5.9553 5.9534 5.9528 5.9613 crN 2 5.9626 5.9574 5.9556 5.9549 5.9626 crN 3 5.9806 5.9824 5.9860 5.9902 5.9806 C-F crN 1 0.8756 0.8759 0.8762 0.8771 0.8782 crN 2 3.0719 3.0720 3.0721 3.0722 3.0720 crN 3 5.9613 5.9553 5.9534 5.9529 5.9599 Table 9: Effects of the inner core composite polymer concrete location cl , where ca 0.35 , on the critical buckling parameter (uncracked steel outer layer). N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 102 This study analyzes the dynamic and buckling behavior of quasi-3D steel-polymer concrete composite box beams with cracks, demonstrating that cracks in the steel outer layer drastically degrade performance: under simply supported (S- S) conditions, increasing the steel crack depth ( as ) from 0 to 1 reduces the first natural frequency (1 ) by 1.7% (2.6711 to 2.6251, Tab. 2) and the first critical buckling load ( crN 1 ) by 3.6% (3.5259 to 3.3980, Tab. 3), while higher modes show greater sensitivity (e.g., simply supported (S-S) 3 drops 5.3% from 22.3181 to 21.1440, and crN 2 plummets 27.2% from 5.9663 to 4.3449); clamped-free (C-F) beams exhibit severe vulnerability, with 1 plunging 7.8% (0.9582 to 0.8838) and crN 1 collapsing 12.1% (0.8784 to 0.7722), whereas clamped-clamped (C-C) beams resist crack effects better (e.g., 1 drops only 0.8%, 5.8866 to 5.8386). Crack location in steel ( sl ) further modulates responses: mid-span cracks ( sl =0.55) minimize simply supported (S-S) 1 to 2.5568 (Tab. 4) and reduce crN 1 by 6.1% (3.4389 to 3.2210, Tab. 5), while cracks near supports ( sl =0.85) restore performance (e.g., simply supported (S-S) 1 rebounds to 2.6398), and clamped-free crN 1 rises 8.3% (0.8054 to 0.8724) as cracks shift toward the free end. In contrast, cracks in the polymer concrete core ( ac , cl ) have negligible impact: even at full depth ( ac =1), S-S 1 decreases by 0.1% (2.6711 to 2.6684, Tab. 6), and crN 2 drops 3.4% (5.9663 to 5.7654, Tab. 7), with crack location ( cl ) causing ≤0.2% frequency variation (e.g., simply supported (S-S) 1 ranges 2.6666–2.6699, Tab. 8) and ≤0.3% buckling fluctuation (e.g., S-S crN 1 varies 3.5140–3.5227, Tab. 9). Boundary conditions critically influence outcomes: C-C beams stabilize buckling loads (e.g., crN 3 declines only 3.2%, 28.5679 to 27.6430, Tab. 3) and suppress crack-location effects (e.g., 3 fluctuates <0.1%, 28.5346–28.5621, Tab. 8), while C-F beams suffer catastrophic steel-crack sensitivity (e.g., 1 drops 7.8% and crN 1 12.1%) but ignore concrete cracks ( crN 1 decreases 0.7%, 0.8784 to 0.8722, Tab. 7). The results confirm steel’s dominance in structural integrity (steel’s modulus steel concreteE E/ 12.2 ), with mid-span steel cracks most critical due to peak bending moments, while polymer concrete cracks are trivial, advocating prioritized steel-layer maintenance and validating the DQFEM model for crack-effect analysis in composite beams. Results in Tabs. (2-9) are illustrated in Figs. (5-6) for better visualization of the effect of the crack presence on the frequencies and critical buckling. N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 103 Figure 5: Crack location effect on the frequency’s parameters of the beam for different boundary conditions and crack depth. Figure 6: Crack location effect on the critical buckling parameter of the beam for different boundary conditions and crack depth. Figs. 5 and 6 illustrate the influence of crack location (steel outer layer vs. inner composite polymer concrete core) on frequencies and critical buckling parameters of the box beam under varying boundary conditions (simply supported (S-S), clamped-clamped (C-C), clamped-free (C-F)) and crack depths. For S-S beams, the critical crack location is consistently at the midspan for both frequencies and buckling, regardless of crack depth or material (steel/composite), with symmetric N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 104 responses across crack positions. In C-C beams, frequencies exhibit dual critical regions: reductions occur near the supports and midspan, while values at the quarter-span closely match those of the uncracked beam; conversely, critical buckling parameters approach uncracked-beam levels when cracks are near the boundaries but remain nearly constant between midspan and quarter-span, indicating positional insensitivity in this zone. For C-F beams, frequencies are minimized at the clamped end but recover to near-uncracked values at the free end, with asymmetric responses and heightened sensitivity to crack position compared to S-S and C-C cases. Crack depth effects (Figs. 7–8) show a universal decline in frequencies with increasing depth across all boundaries and materials. For buckling, C-C beams with steel cracks exhibit clustered values across depths, suggesting limited depth dependency, while composite core cracks in C-C beams display nonlinear behavior: buckling remains stable up to a depth ratio of 0.5 before sharply declining, with spatial variations (e.g., midspan cracks induce the most severe degradation). Symmetry governs S-S and C-C responses, while asymmetry defines C-F behavior, with midspan cracks dominating S-S failures, C-C vulnerabilities concentrated near boundaries/midspan, and material- dependent buckling collapse (composite cores degrade abruptly beyond critical depths). These trends underscore the interplay of boundary constraints, crack geometry (location/depth), and material composition in determining structural stability. Figure 7: Crack depth effect on the frequency’s parameters of the beam for different boundary conditions and crack location N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 105 Figure 8: Crack depth effect on the critical buckling parameter of the beam for different boundary conditions and crack location CONCLUSION his study employed the Differential Quadrature Finite Element Method (DQFEM) integrated with quasi-3D beam theory to investigate the dynamic and buckling behavior of steel-polymer concrete composite box beams with cracks. The analysis focused on cracks in both the steel outer layer and the polymer concrete core, evaluating their effects under varying boundary conditions (simply supported [S-S], clamped-clamped [C-C], clamped-free [C-F]), crack depths, and locations. Key findings demonstrate that steel-layer cracks induce severe degradation: in C-F beams. Conversely, polymer concrete core cracks exhibited negligible impact, with frequency reductions ≤0.1% even at full depth. Crack location critically modulated responses: midspan cracks dominated S-S beam failures (symmetric frequency/buckling reductions), while C-C beams showed dual vulnerabilities near boundaries and midspan, with positional insensitivity in buckling between midspan and quarter-span. Boundary conditions profoundly influenced outcomes: C-F beams displayed asymmetric behavior, with catastrophic sensitivity to steel cracks near the clamped end, while C-C beams resisted buckling degradation until critical composite crack depths ( ac >0.5), beyond which nonlinear collapse occurred. The DQFEM model demonstrated high accuracy, validated against experimental and numerical benchmarks (e.g., ≤1.5% deviation in natural frequencies, Tab. 1). Parametric studies using non-dimensional crack parameters underscored steel’s dominance in structural integrity (steel-to-concrete modulus ratio), with midspan steel cracks most critical due to peak T N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 106 bending moments. These results emphasize the necessity of prioritizing steel-layer maintenance in composite beam design, particularly for dynamic and stability-critical applications. The study advances predictive frameworks for crack-induced degradation in quasi-3D systems, offering engineers actionable insights to enhance the resilience of material-based structures under complex loading scenarios. This study advances predictive frameworks for crack-induced degradation in composite beams, offering engineers actionable insights to: Optimize material distribution (e.g., steel reinforcement at midspan for S-S beams). Enhance inspection protocols for high-risk zones (e.g., clamped ends in C-F beams). Improve resilience in dynamic or stability-critical applications (e.g., aerospace, civil infrastructure). By bridging theoretical modeling (quasi-3D DQFEM) with practical design strategies, this work underscores the critical interplay of boundary constraints, crack geometry, and material heterogeneity in governing structural stability, paving the way for next-generation composite beam systems. DISCLOSURE STATEMENT o potential conflict of interest was reported by the author(s). DATA AVAILABILITY STATEMENT he authors declare that the data are available within the article. FUNDING AND/OR CONFLICTS OF INTERESTS o potential conflict of interest was reported by the author(s). REFERENCES [1] Han, S.-C., Kreja, I., Rus, G. and Lomboy, G. R. (2016). Structural Dynamics and Stability of Composite Structures, Advances in Materials Science and Engineering, 1, p. 7468181, DOI: 10.1155/2016/7468181. [2] Dunaj, P., Berczyński, S., Chodźko, M. and Niesterowicz, B. (2020). Finite Element Modeling of the Dynamic Properties of Composite Steel–Polymer Concrete Beams, Materials, 13(7), p. 1630]. https://www.mdpi.com/1996-1944/13/7/1630. [3] Zou, G. P., Xia, P. X., Shen, X. H. and Wang, P. (2017). Mechanical properties analysis of steel– concrete–steel composite beam, Journal of Sandwich Structures & Materials, 19(5), pp. 525-543, DOI: 10.1177/1099636215622949. [4] Dahmane, M., Benadouda, M., Bennai, R., Saimi, A. and Atmane, H. A. (2024). Effect of crack on the dynamic response of bidirectional porous functionally graded beams on an elastic foundation based on finite element method, Acta Mechanica, 235(6), pp. 3849-3860. DOI: 10.1007/s00707-024-03906-1. [5] Berczyński, S. and Wróblewski, T. (2005). Vibration of Steel–Concrete Composite Beams Using the Timoshenko Beam Model, Journal of Vibration and Control, 11(6), pp. 829-848. DOI: 10.1177/1077546305054678. [6] Niesterowicz, B., Dunaj, P. and Berczyński, S. (2020). Timoshenko beam model for vibration analysis of composite steel-polymer concrete box beams, Journal of Theoretical and Applied Mechanics, 58(3), pp. 799-810. DOI: 10.15632/jtam-pl/122389. [7] Mantari J. L. andGuedes Soares, C. (2014). Four-unknown quasi-3D shear deformation theory for advanced composite plates, Composite Structures, 109, pp. 231-239. DOI: 10.1016/j.compstruct.2013.10.047. N T N N. Laouche et alii, Fracture and Structural Integrity, 73 (2025) 88-107; DOI: 10.3221/IGF-ESIS.73.07 107 [8] Ahmed, S., Abdelhamid, H., Ismail, B. and Ahmed, F. (2021). An Differential Quadrature Finite Element and the Differential Quadrature Hierarchical Finite Element Methods for the Dynamics Analysis of on Board Shaft, European Journal of Computational Mechanics, 29(4-6), pp. 303–344, DOI: 10.13052/ejcm1779-7179.29461. [9] Xing, Y. and Liu, B. (2009). High-accuracy differential quadrature finite element method and its application to free vibrations of thin plate with curvilinear domain, International Journal for Numerical Methods in Engineering, 80(13), pp. 1718-1742. DOI: 10.1002/nme.2685. [10] Safaei, B. (2021). Frequency-dependent damped vibrations of multifunctional foam plates sandwiched and integrated by composite faces, The European Physical Journal Plus, 136(6), p. 646. DOI: 10.1140/epjp/s13360-021-01632-4. [11] Yang, Z., Lu, H., Sahmani, S. and Safaei, B. (2021). Isogeometric couple stress continuum-based linear and nonlinear flexural responses of functionally graded composite microplates with variable thickness, Archives of Civil and Mechanical Engineering, 21(3), p. 114. DOI: 10.1007/s43452-021-00264-w. [12] Liu, H.,Saeid, S. and Safaei, B. (2023). Nonlinear buckling mode transition analysis in nonlocal couple stress-based stability of FG piezoelectric nanoshells under thermo-electromechanical load, Mechanics of Advanced Materials and Structures, 30(16), pp. 3385-3405. DOI: 10.1080/15376494.2022.2073620. [13] Milić, P., Marinković, D., Klinge, S. and Ćojbašić, Ž. (2023). Reissner-Mindlin based isogeometric finite element formulation for piezoelectric active laminated shells, Tehnički vjesnik, 30(2), pp. 416-425. [14] Alshenawy, R., Safaei, B., Sahmani, S., Elmoghazy, Y., Al-Alwan, A. and Nuwairan, M. A. (2022). Buckling mode transition in nonlinear strain gradient-based stability behavior of axial-thermal-electrical loaded FG piezoelectric cylindrical panels at microscale, Engineering Analysis with Boundary Elements, 141, pp. 36-64. DOI: 10.1016/j.enganabound.2022.04.010. [15] Sahmani, S., Rabczuk, T., Song, J.-H. and Safaei, B. (2025). Unified nonlocal surface elastic-based thermal induced asymmetric nonlinear buckling of inhomogeneous nano-arches subjected to dissimilar end conditions, Composite Structures, 357, p. 118961. DOI: 10.1016/j.compstruct.2025.118961. [16] Feng, J., Gao, C., Safaei, B., Qin, Z., Wu, H., Chu, F., Scarpa, F. (2025). Exceptional damping of CFRPs: Unveiling the impact of carbon fiber surface treatments, Composites Part B: Engineering, 290, p. 111973. DOI: 10.1016/j.compositesb.2024.111973. [17] Saimi, A., Bensaid, I. and Fellah, A. (2023). Effect of crack presence on the dynamic and buckling responses of bidirectional functionally graded beams based on quasi-3D beam model and differential quadrature finite element method, Archive of Applied Mechanics. DOI: 10.1007/s00419-023-02429-w. [18] Saimi, A., Bensaid, I. and Civalek, Ö. (2023). A study on the crack presence effect on dynamical behaviour of bi- directional compositionally imperfect material graded micro beams, Composite Structures, 316, p. 117032. DOI: 10.1016/j.compstruct.2023.117032. [19] Khiem, N. T., Hai, T. T. and Huong, L. Q. (2023). Modal analysis of cracked FGM beam with piezoelectric layer, Mechanics Based Design of Structures and Machines, 51(9), pp. 5120-5140. DOI: 10.1080/15397734.2021.1992775. [20] Khiem, N. T., Tran, H. T. and Nam, D. (2020). Modal analysis of cracked continuous Timoshenko beam made of functionally graded material, Mechanics Based Design of Structures and Machines, 48(4), pp. 459-479. DOI: 10.1080/15397734.2019.1639518. [21] Hassaine, N., Touat, N., Dahak, M., Fellah, A. and Saimi, A. (2024). Study of crack’s effect on the natural frequencies of bi-directional functionally graded beam, Mechanics Based Design of Structures and Machines, 52(1), pp. 375-385. DOI: 10.1080/15397734.2022.2113408. [22] Rizov, V. (2017). Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non- linearity, Fracture and Structural Integrity, 11(41), pp. 491-503. DOI: 10.3221/IGF-ESIS.41.61. [23] Benaoum, F., Khelil, F. and Benhamena, A. (2020, Numerical analysis of reinforced concrete beams pre cracked reinforced by composite materials, Fracture and Structural Integrity, 14(54), pp. 282-296. DOI: 10.3221/IGF-ESIS.54.20. [24] Namdar, A., Darvishi, E., Feng, X., Zakaria, I. and Yahaya, F. M. (2016). Effect of flexural crack on plain concrete beam failure mechanism A numerical simulation, Fracture and Structural Integrity, 10(36), pp. 168-181. DOI: 10.3221/IGF-ESIS.36.17. << /ASCII85EncodePages false /AllowTransparency false /AutoPositionEPSFiles true /AutoRotatePages /None /Binding /Left /CalGrayProfile (Dot Gain 20%) /CalRGBProfile (sRGB IEC61966-2.1) /CalCMYKProfile (U.S. Web Coated \050SWOP\051 v2) /sRGBProfile (sRGB IEC61966-2.1) /CannotEmbedFontPolicy /Error /CompatibilityLevel 1.4 /CompressObjects /Tags /CompressPages true /ConvertImagesToIndexed true /PassThroughJPEGImages true /CreateJobTicket false /DefaultRenderingIntent /Default /DetectBlends true /DetectCurves 0.0000 /ColorConversionStrategy /CMYK /DoThumbnails false /EmbedAllFonts true /EmbedOpenType false /ParseICCProfilesInComments true /EmbedJobOptions true /DSCReportingLevel 0 /EmitDSCWarnings false /EndPage -1 /ImageMemory 1048576 /LockDistillerParams false /MaxSubsetPct 100 /Optimize true /OPM 1 /ParseDSCComments true /ParseDSCCommentsForDocInfo true /PreserveCopyPage true /PreserveDICMYKValues true /PreserveEPSInfo true /PreserveFlatness true /PreserveHalftoneInfo false /PreserveOPIComments true /PreserveOverprintSettings true /StartPage 1 /SubsetFonts true /TransferFunctionInfo /Apply /UCRandBGInfo /Preserve /UsePrologue false /ColorSettingsFile () /AlwaysEmbed [ true ] /NeverEmbed [ true ] /AntiAliasColorImages false /CropColorImages true /ColorImageMinResolution 300 /ColorImageMinResolutionPolicy /OK /DownsampleColorImages true /ColorImageDownsampleType /Bicubic /ColorImageResolution 300 /ColorImageDepth -1 /ColorImageMinDownsampleDepth 1 /ColorImageDownsampleThreshold 1.50000 /EncodeColorImages true /ColorImageFilter /DCTEncode /AutoFilterColorImages true /ColorImageAutoFilterStrategy /JPEG /ColorACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /ColorImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /JPEG2000ColorACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /JPEG2000ColorImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /GrayImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /JPEG2000GrayACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /JPEG2000GrayImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict << /K -1 >> /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False /CreateJDFFile false /Description << /ARA /BGR /CHS /CHT /CZE /DAN /DEU /ESP /ETI /FRA /GRE /HEB /HRV (Za stvaranje Adobe PDF dokumenata najpogodnijih za visokokvalitetni ispis prije tiskanja koristite ove postavke. Stvoreni PDF dokumenti mogu se otvoriti Acrobat i Adobe Reader 5.0 i kasnijim verzijama.) /HUN /ITA /JPN /KOR /LTH /LVI /NLD (Gebruik deze instellingen om Adobe PDF-documenten te maken die zijn geoptimaliseerd voor prepress-afdrukken van hoge kwaliteit. De gemaakte PDF-documenten kunnen worden geopend met Acrobat en Adobe Reader 5.0 en hoger.) /NOR /POL /PTB /RUM /RUS /SKY /SLV /SUO /SVE /TUR /UKR /ENU (Use these settings to create Adobe PDF documents best suited for high-quality prepress printing. Created PDF documents can be opened with Acrobat and Adobe Reader 5.0 and later.) >> /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ << /AsReaderSpreads false /CropImagesToFrames true /ErrorControl /WarnAndContinue /FlattenerIgnoreSpreadOverrides false /IncludeGuidesGrids false /IncludeNonPrinting false /IncludeSlug false /Namespace [ (Adobe) (InDesign) (4.0) ] /OmitPlacedBitmaps false /OmitPlacedEPS false /OmitPlacedPDF false /SimulateOverprint /Legacy >> << /AddBleedMarks false /AddColorBars false /AddCropMarks false /AddPageInfo false /AddRegMarks false /ConvertColors /ConvertToCMYK /DestinationProfileName () /DestinationProfileSelector /DocumentCMYK /Downsample16BitImages true /FlattenerPreset << /PresetSelector /MediumResolution >> /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ] >> setdistillerparams << /HWResolution [2400 2400] /PageSize [612.000 792.000] >> setpagedevice