www.geologia-croatica.hr 1. INTRODUCTION The Bučim porphyry Cu deposit is located in the border area between the Serbo-Macedonian Massif (SMM) and the Vardar Zone (VZ). It is an integral part of the Bučim-Damjan-Borov Dol ore district located in the eastern part of the Republic of Macedonia. In terms of its metallogeny, it belongs to the Lece - Chalkidi metallogenic zone (SERAFIMOVSKI, 1990), which is a part of the Alpine-Balkan-Carpathian-Dinarides metallogenetic belt (HEINRICH & NEUBAUER, 2002). The intrusions of the district belong to the Late Eocene-Oligocene magmatic zone (HARKOVSKA et al., 1989), which cross cuts older tectonic structures (SCHEFER et al., 2011), and occurs within the Circum Rhodope unit according to the compilation map of SCHMID et al. (2013). The Late Oligocene-Miocene intrusions are associated with both economic and uneconomic ore mineralization. Although the mine at Bučim has been known since ancient times, it was not explored in detail until the 1970’s (SERAFIMOVSKI et al., 2010). In terms of its output and ore reserves, it is a small porhyry deposit. Since 1979, 80 Mt of the 120 Mt estimated reserves (as mineral resources), have been mined, with a production dynamic of 4 000 000 tonnes ore annually and an average ore grade of 0.34% Cu and 0.35 g/t Au (ČIFLIGANEC, 1993; SERAFIMOVSKI et al., 1996, 2010; VOLKOV et al., 2010). It should also be mentioned that this is characteristic of all por- phyry deposits determined in the border area between the SMM and the VZ or the Lece - Chalkidi zone. The deposit consists of four ore bodies, three of which are related to por- phyry fingers and one is distinguished as a supergene minera- lization (ČIFLIGANEC, 1993; SERAFIMOVSKI & BOEV, 1996; SERAFIMOVSKI et al., 2010; VOLKOV et al., 2010). The intrusions are of andesitic to trachy-andesitic composition with crystallization ages ranging between 27.5 and 24.9 Ma (K/Ar whole rock ages) (ČIFLIGANEC, 1993; SERAFI- MOVSKI et al., 2010). Various mineralogical and fluid inclusion studies have been undertaken in the district but only a limited amount of data related to the magmatic-hydrothermal history of the system have been published (ČIFLIGANEC, 1993; SERAFIMOV- SKI & BOEV, 1996; SERAFIMOVSKI et al., 2010; STRASHIMIROV et al., 1996; VOLKOV et al., 2010). 2. REGIONAL GEOTECTONIC AND METALLOGENIC SETTING The metallogeny of the southern Balkan Peninsula is deter- mined by the geodynamic evolution of the Tethys-Eurasian ABSTRACT The paper presents data about the geology, geochemistry, structure, genesis and specific fea- tures of the Bučim porphyry Cu deposit which is actively mined in Macedonia. The porphyry mineralization (0.3 % Cu, 0.3-0.5 ppm Au) is spatially and temporarily associated with Ter- tiary subvolcanic intrusions of latitic and latitic-andesitic composition. The intrusions oc- curred during Oligo-Miocene time (24 to 27 Ma), a period of intensive tectono-magmatic and ore-forming processes.. The latest results of this study identify an array of major ore (hypogen) minerals such chalcopyrite, pyrite, magnetite, haematite, cubanite, valleriite, native Au and bornite and secon dary enrichment zone minerals (within Čukar ore body) including chalcocite, cove llite, tenorite, native Cu, malachite, azurite etc. Added minerals such as calaverite, krennerite, electrum, petzite and bismuth±selenium minerals (bismuthinite, galenobismutite, krupkaite, friedrichite, emplectite, cosalite, laitakarite and native bismuth) are also present. Variations of the δ34S values for the whole Bučim ore deposit ranged from +0.2 ‰ to +2.5 ‰ while δ13C‰ and δ18O‰ isotope values ranged from -10.8 to -3.8‰ and from +14.0 to +22.7 ‰, respectively. With regard to fluid inclusions, it was confirmed that beside the pre-dominant gas-liquid, two-phase inclusions, there are also three-phase fluid inclusions (gas + liquid + solid phase). Also, recent Sr and Nd isotope ratios (87Sr/86Sr 0.70666-0.70741 and 143Nd/144Nd 0.512487–0.512489) indicate slight contamination of the magmatic products by continental crust material, due to partial melting of the deep parts of continental crust underthrust by col- lision of continental blocks. The REE data show results that are comparable with high con- tents of large ion lithophile elements (LILE), high Ba/Nb ratio (116.72-190.72) and depletion in high field strength elements (HFSE) and Europium negative anomaly (0.68893-0.91251). Keywords: Bučim, ore deposit, porphyry, Re- public of Macedonia Article history: Received September 14, 2015 Revised and accepted January 05, 2016 Avaliable online February 29, 2016 101-119 12 Figs. 8 Tabs. doi:10.4154/gc.2016.09 Porphyry Cu mineralization related to the small Tertiary volcanic intrusions in the Bučim ore deposit, Eastern Macedonia Todor Serafimovski1, Goran Tasev1, Sabina Strmić Palinkaš2, Ladislav A. Palinkaš3 and Lazar Gjorgjiev1 1 Goce Delčev University, Faculty of Natural and Technnical Sciences, Krste Misirkov bb, PO. Box 201, MK-2000 Štip, Republic of Macedonia (goran.tasev@ugd.edu.mk; todor.serafimovski@ugd.edu.mk) 2University of Tromsø, Faculty of Science and Technology, Department of Geology, Dramsvegen 201, N-9037 Tromsø, Norway, (sabina.s.palinkas@uit.no) 3University of Zagreb, Faculty of Science, Department of Geology, Institute of Mineralogy and Petrology, Horvatovac 95, HR-10000 Zagreb, Croatia (lpalinkas@gfz.hr) Vol. 69/1 102 metallogenic belt (TEMB), as outlined by JANKOVIĆ (1997), and ancient crystalline massifs. The TEMB formed during post-Mesozoic times in the location of the former Jurassic Tethys palaeo-ocean, situated between the southern continen- tal margin of Eurasia on one side, and the African-Arabian and Indian plate on the other side. The belt extends from the west- ern Mediterranean, through the Alps and southeastern Europe via the Lesser Caucasus, Hindu Kush, and Tibetan Plateau, to Burma and northwestern Indonesia, where it joins the western segment of the Pacific metallogenic belt. The southern Balkan Peninsula, including the Republic of Macedonia, is a sector of the central TEMB (Fig. 1). The formation of ore deposits was related to certain chronologi- cal stages and geo dy na mic set- tings: (1) Late Permian-Early Tri- assic intracontinental rifting along the northern bou ndary of Gondwa- na and/or its previously detached fragments; (2) Jurassic oceaniza- tion marked by the ophiolitic com- plex; (3) suprasubduction magma- tism; and (4) a postcollisional (oroge nic) continental setting and related formation of various base- and noble-metal deposits (Pb-Zn- Ag, Cu-Au, Au-As-Sb-TI, Au-Ag) (JANKOVIĆ, 1997). The Jurassic ophiolite belt extends for hundreds of kilometres within Macedonia and for a few thousand kilometres on a global scale via Greece, Tur- key, the Caucasus, and Iran to the Himalayas. In Macedonia, the ophiolite complex occurs in the Vardar Zone (VZ) and the adjacent Serbo-Macedonian Massif (SMM) (KARAMATA & LO VRIĆ, 1978). The VZ extends in a NW-SE direc- tion between the SMM and the Pe- lagonian Massif (Fig. 1). Ophi- olites of the VZ comprise the Ju- rassic gabbro-peridotite complex, which is overlain by Cretaceous flysch. The SMM is located be- tween the Carpathian Mountains and the Balkanides in the east and the VZ in the west. Dismembered peridotites in the form of pseudo- dykes occur in the SMM along its contact with the VZ. The collision of the African and Eura s ian plates was accompanied by closure of the ocean and su b duction of the oce- anic crust bene ath the SMM. Deep faults that formed along the active co ntinental margins have impor- tant metallogenic implications. The regional te cto nic units listed above, extending parallel to the VZ, control regional metallogenic zones, ore districts, and ore fields (Fig. 1). Colli sion, post-collision processes, and Tertiary magmatism were crucial for localization of the base-metal ore mineralization (JANKOVIĆ, 1997; SERAFIMOVSKI et al., 2010). Cenozoic reactivation embraced largely the eastern part of the Macedonian Arch and was expressed in the development of the NW-trending faults oriented obliquely to the VZ and the transverse NE-trending faults at the final stage (TOMSON et al., 1998; VOLKOV et al., 2006). The rocks of the Tertiary volcanic-plutonic complex and related base-metal mineraliza- tion occur in four tectonic and metallogenic zones (Fig. 1): (1) Figure 1. Regional location of the Lece-Chalkidiki and Besna Kobila-Osogovo-Thassos metallo- genic zones and area of interest (modified after SERAFIMOVSKI, 1990). Serafimovski et al.: Porphyry Cu mineralization related to the small Tertiary volcanic intrusions in the Bučim ore deposit... 103 the magmatic zone at the mobile northern, northeastern, and eastern margins of the Dinarides (Mala Kropa, Srebrenica, Bo- ranja, Golija, Zeljin, Rogozna; PAMIĆ & JURKOVIĆ, 1997; JANKOVIĆ, 1997); (2) the magmatic zone in the severely tec- tonized central part of the VZ (Kopaonik, Bukulja, Avala, Cer, Kožuf; JANKOVIĆ, 1997; JANKOVIĆ et al., 1997); (3) the Lece-Chalkidiki metallogenic zone at the contact between SMM and VZ (Zletovo, Plavica, Bučim, Borov Dol, Damjan, Borović; SERAFIMOVSKI, 1993; SERAFIMOVSKI et al., 2000); (4) the Besna Kobila-Osogovo metallogenic zone (Sasa, Toranica, Kadica, Ilovica; SERAFIMOVSKI, 1990). The Precambrian metamorphic complex is the oldest in the SMM (Fig. 1). The complex is composed of biotite, muscovite, (two-mica), and gneisses, amphibolites, muscovite schists, and other kind of metamorphic rocks. Gneisses are widespread and favourable for the localization of ore. Palaeozoic rocks com- prise chlorite-amphibole schists, slate-carbonate group, me- tagabbro, and dolerite, which are less favourable for the lo- calization of porphyry ore than the Precambrian rocks. The Mesozoic formations combine Jurassic ultramafic and granitic rocks. Serpentinized peridotites and pyroxenites are locally ove rla pped by volcanic flows and Quaternary sediments. Granite, granodiorite, and quartz monzo nite are accompanied by low-grade chalcopyrite mineralization. Palaeogene sedi- mentary rocks (con glomerate, tuffaceous flysch, limestone) are cut through by Neogene subvolcanic intrusive bodies. These rocks, especially marlstone and shale, are favourable hosts for porphyry and skarn mineralization; they serve as screens for ore-bearing fluids and protoliths for metasomatic alteration. Neogene conglomerate, gravelstone, sandstone, limestone, and other sedimentary rocks are overlapped by Quaternary clayey and sandy sediments (fans, hillside, and al- luvial facies) (e.g. DUMURDŽANOV et al., 2004). Three variably oriented fault systems are recognized: the first NW-trending fault system coincides in the strike of the major tectonic units; while the second and third systems ex- tend in the northeastern and meridional directions, respective- ly. The third system has important implications for the deve- lop ment of Ter tiary magmatism and related iron skarn and porphyry Cu mineralization. This system controls numerous volcanic domes and necks localized at intersections of near- meridional and northeastern faults. Volcanic activity pro- gressed from the beginning of the late Oligocene, and ore min- eralization formed in Miocene times (SERAFIMOVSKI et al., 2010). 3. BUČIM-DAMJAN-BOROV DOL ORE DISTRICT The Bučim-Damjan-Borov Dol ore district with porphyry Cu and iron skarn minerali za tion occupies the southwestern part of the Lece-Chalkidiki metallogenic zone and is about 50 km2 in size. The ore mineralization is concentrated in the Bučim, Damjan, and Borov Dol ore fields (Fig. 2). Several NW–SE striking thrust faults divide the district into different te cto nic units (Fig. 2, see HRISTOV et al., 1973). The aforementioned thrust faults are related to Early Mio- cene crustal shortening, which led to about 800 m of uplift of the Bučim region in the Borov Dol area, which in turn is up- lifted 800 m relative to the area located to its west (based on field observations, there are different exposure levels between Bučim and Borov Dol, Fig. 2B). The preservation of Eocene strata decreases towards the NE due to erosion. Therefore, deeper geological units, such as Palaeozoic schists and Pre- cambrian gneisses, are increasingly exposed towards the NE (Fig. 2). Numerous intrusions are found in the area, among them the Bučim, Damjan, Borov Dol and Black Hill intru- sions. After the emplacement of the porphyry intrusions, a later period of thrust faulting led to uplift of the Bučim area in contrast to the Borov Dol–Damjan region (Figs. 1, 2, 3). Seve- ral andesite/trachyandesite intrusions, which are embedded in the volcanic tuffs, host the Borov Dol Cu mineralization (ČIFLIGANEC, 1993; SERAFIMOVSKI et al., 2010), which offers a view into a shallow magma chamber. It is located 8 km SSW of Bučim also in the Circum Rhodope belt. ČIFLIGANEC (1993) dated the Bučim andesites by K–Ar whole rock me- thods and they yielded ages between 27.5 and 24.9 Ma and the Damjan and Borov Dol andesites range in age from 28 to 26.5 Ma. The faults in the area mostly trend NNW–SSE and NNE– SSW, and the distribution of the intrusions largely follows them (SERAFIMOVSKI & BOEV, 1996). The Bučim ore field is localized in the northern part of the ore district within the SMM and is characterized by (1) NW- and NE-trending low-order faults; (2) prevalence of latite and tra chy-latite dykes and minor intrusions as products of Tertiary volcanism; and (3) porphyry Cu mineralization. No volcanic domes or calderas expressed as landforms are known. Only small ring structures, a few hundreds of metres - 1.5 km in dia- meter accompanied em p l a cement of the subvolcanic stocks. The outer parts of such structural forms are composed of gne- iss, whereas the inner parts are composed of latitic stocks. Similar structural forms are wi de spread elsewhere in this ore district. In addition to the Bučim deposit, numerous po rphyry Cu-occurrences are known in the north of the district (Vranjak, Crn-Vrv-Kalapetrivci etc.). The Damjan ore field is localized in the southeastern part of the ore district at the contact between the Damjan horst and the Vardar Zone and is characterized by (1) NW-SE, NNW- SSE, NE-SW striking fault structures; (2) prevalence of Juras- sic ultrabasics, Palaeogene flysch sediments, Tertiary volca- nics and newly formed metasomatic products, skarns; and (3) Fe-skarn mineralization. The intrusions are of variable size and created diverse host rocks of different tectonic units. The Damjan Fe-skarn deposit is located about 4 km south of Bučim and is one of the rare skarn deposits, which formed at the con- tact between the andesite and Palaeogene flysch. Mineraliza- tion itself is hosted by skarns and is represented by rich mag- netite-haematite parts (>40% Fe). The Borov Dol ore field is localized at the margin of a vol- canic caldera in the southern part of the ore district within the VZ. The caldera, 5 km in diameter, is clearly expressed in topo gra phy and complicated by several volcanic domes and depressions 1.0-1.5 km in diameter. One of these depressions hosts the Borov Dol deposit. The NW-trending faults control the Neo gene latite and quartz latite dykes, necks, and extru- sions. The Borov Dol deposit is related to this volcanic-pluto- nic complex. The ore-bearing volcanic rocks are metaso ma- tically altered. The volcanic rocks belong to the high-K sho- shonitic series and correspond to monzodiorite and monzonite Vol. 69/1 104 in K2O-SiO2 discrimination. These are andesite, latite, trachyte, and rhyolite, inclu ding transitional varieties (SERAFIMOV- SKI et al., 2010; LEHMANN et al., 2013). It is worth mention- ing that the rocks of the shoshonitic series are typical of dis- tricts with porphyry Cu mineralization at continental margins, e.g., Bajo Alumbrera, Gunumba, Bingham, Ok-Tedi, Grasberg, Cadia, etc. (MÜLLER & GROVES, 2000; BLEVIN, 2002). 3.1. GENERAL FEATURES As previously mentioned the Bučim deposit, located in the northeast of the ore district (Fig. 2), has been reco gnised since ancient times, but was only explored in detail in the 1970s. About 80 Mt of ore have been extracted, with an average grade of 0.34% Cu and 0.35 g/t Au, from the 120 Mt ore reserves, as determined in 1979. The annual exploitation ca- pability of the mine is 4 Mt of ore. At present, ore with 0.21 % Cu, 0.2 g/t Au, and 0.8 g/t Ag is being mined. About 32 000 t of concentrate con- taining 18-21 % Cu and 18 g/t Au (Au recovery is 50%) has been pro- duced and delivered by trucks to smelters at Bor in Serbia and Pirdop in Bulgaria. At the moment, the Bučim Mine is owned by the Solway Investment Group Limited. The Bučim deposit is likely the world’s smallest deposit of this type currently operated as a mine. The successful mining of this deposit for many years refutes the popular opin- ion that the porphyry Cu deposits profitable for mining must contain no less than 2.5 Mt of Cu metal and the Cu grade in ore should be higher than 0.5% (SERAFIMOVSKI et al., 2010). 3.2. GEOLOGY OF THE DEPOSIT The first written data about the geo- logical setting of the Bučim area can be found in the works of CVIJIĆ (1906, 1924) followed by publica- tions by BONČEV (1920), PETU- NIKOV (1940, 1944), PAVLOVIĆ (1939) and others. The geological setting of the immediate surround- ings of the deposit includes the follo- wing end members: 3.2.1. Precambrian metamorphic complex This is the most domimant geologi- cal unit in the area and is represented by its heterogenous lithological composition. Such a lithologi- cal heterogenity resulted from the fact that the primary accu- mulation of sedimentary and magmatic rocks was subjected to regional metamorphism as well as to later retrograde pro- cesses, the influence of Precambrian granitoid magmatism and Figure 2. A: Geological map of the Bučim-Damjan-Borov Dol ore district, modified after an un- published mine map of HRISTOV et al. (1973); B: Schematic cross section through the Bučim- Damjan-Borov Dol ore district (modified by LEHMANN et al., 2013). Serafimovski et al.: Porphyry Cu mineralization related to the small Tertiary volcanic intrusions in the Bučim ore deposit... 105 Jurassic granitoid magmatism associated with a progressive Abakuma type of metamorphism and finally the influence of hydrothermal processes related to the Tertiary magmatism (PETKOVIĆ, 1966; PETKOVIĆ et al, 1968; DUMURDŽANOV et al., 1969; CULEV et al., 1970). Gneisses are the most widespread rocks in both the broader and immediate areas around the deposit. According to their mineral composition, several fa cies can be discriminated (which mutually replace each other): biotite gneisses, amphi- bole-biotite gneisses, muscovite gneisses, two-mica gneisses, and metasomatic (leuco cratic) gneisses. During the exploita- tion of the Central Part of the ore body, the variability in chemi cal composi tion of the gneisses was determined more accurate ly. They consist of bands of mica (biotite and musco- vite) alternating with quartz bands. Garnet occurs as the domi- nant mineral besides quartz, biotite and muscovite. Apatite is an accessory mineral. Mica-schists represent a normal litho- logical member of the crystalline schists in which they occur as an inte rstratified facies. Consequently, they are of the same metamorphic age. From the aspect of mineralization, they rep- resent an unfavourable environ ment, compared with the gneisses, being poorly per meable for hydrothermal solutions. Amphibolites occur in the crystalline schists in the form of lenses or strata and larger irregular mas ses. Generally, they are concordant to the crystalline schists and at places depart from their folia tion. They are characterized by their dark green colo- ur and shaly texture. 3.2.2. Palaeozoic magmatic rocks They occur in the form of small lenses dis tributed along clear- ly pronounced ruptures. So far, the following have been recog- nized (CULEV, 1970): Amphibolites, fine-grained rocks of a thin banded texture, which represent an unfavourable environ- ment for deposition of the Cu mineraliza tion. They are com- posed of hornblende, plagioclase, and partly, foliated biotite and chlorite aggregates (IVANOV, 1982; ČIFLIGANEC et al., 1993). Serpentinites occur north of the Vršnik orebody. They have significant size and thickness (about 10 m), and are dis- tributed along the rupture zone. Serpentinites, although grouped into the Palaeozoic age, are more probably of Jurassic age and represent the remaining parts of the Vardar-lzmir Ocean. Their position along the rim of the Serbo-Macedonian massif can be explained by diapiric and/or tectonic intrusion. Such serpentinite dykes (in the form of stratified series, some- times even subparallel) occur in the vicinity of porphyry de- posits at Chalkidiki, Greece (SERAFIMOVSKI, 1990). Fine- grained to po rphyroid gabbros are very compact, dark green to black. Their structure suggests their veined character and pe- ripherial position within the in trusive massif. 3.2.3. Tertiary volcanic rocks Tertiary magmatic rocks played an important role in the geo- logical setting of the Bučim deposit (MAJER, 1958; KARA- MATA 1983; ČIFLIGANEC, 1987, 1993; DE NKO VSKI et al., 1983; DENKOVSKI & BANDILOV, 1985; SERAFIMOV- SKI 1990; 1993; STOJANOV & SERAFIMOVSKI, 1990; STOJANOV & BOEV, 1993; BOEV & YANEV, 2001). They occur as minor intrusives within the Precambrian meta mo r- phic co mplex. During the Neogene, tectonic and magmatic processes resulted in widespread magmatism. At the pre sent ero sion level it is represented by sub-volcanic and volcanic facies of latite and andesite in the form of dy kes and necks. In the intrusive level the rocks range in co mpo si tion from quartz diorite to granodiorite. In terms of chemi- stry, they belong to calk-alka line and al- kaline affinity. At later stages, they were enriched in potassium. The ore deposition is genetically co - nne cted to the emplacement of Tertiary, Oligocene-Miocene subvolcanic latitic and latite-ande sitic bodies within Pre- cambrian metamorphic rocks-gneisses, micashists, and amphi bolites (27.5–24.5 m.y., SERAFIMOVSKI, 1993, or 24.5– 24.0 m.y., LEHMANN et al., 2013). 3.3. ORE MINERALIZATION The Bučim deposit is composed of a magmatic complex consisting of three proven fi n ger-like porphyry stocks (Cen- tral Part, Vršnik and Bunardžik) while the Čukar ore body, a su pergene mineraliza- tion developed in gneiss, has already been mined out (ČIFLIGANEC, 1993, Figure 3). The morphology of the Čukar orebody was closely related to the structural-tex- tural features which controlled penetra- tion of the descedent solution responsible Figure 3. Geological scheme and cross section through the Bučim ore deposit (SERAFIMOVSKI & BOEV, 1996). Vol. 69/1 106 for supergene processes on the primary ore mineralization. The shape of the orebody resembles a lense stri king north- south, while the thickness of the supergene sulfide ore-bearing zone does not exceed 60 m (the ab solute height of the super- gene mineralization was between 645-505 m a.s.l.). The length and width of the ore body were 400 and 200 m, respectively. According to new geo lo gical field obse rva tions a magmatic stock is assumed to sit below the Čukar ore body (personal communi ca tion with local mining geologists; Figure 3A). Un- fortunately, drill cores are now unavailable and the pile of waste from the open pit has accumulated on the remains of the body. The mineralization of the Central ore body porphyry is cut by the Vršnik intrusion. This relationship is visible in minera- lized gneiss clasts, which contain veins that are cut off by the magmatic intrusion. Accordingly, the Central intrusion is older than the Vršnik intrusion (Figure 3B). The Central Part ore body is emplaced in various Precambrian gneisses of the Cir- cum-Rhodope unit. The morphology of the ore body, conformable with the in- trusion (stock) almost isometrically on plane, resembles re- verse or trun cated cones emplaced mutually into each other (with a diameter of 500 m, surrounding an andesitic stock with a vertical depth of more than 500 m, see Fig. 3B). The interior cone has smaller angles of overlap of the conical surfaces, while the outer cone, in relation to the andesite intrusion, is more inclined. The Cu mineralization is primary (hypogene). The most significant ore mineral is chalcopyrite, which is ac- companied by pyrite, magnetite, haematite, cubanite, valerite, native Au, bornite and others (SERAFIMOVSKI & BOEV, 1996). Gneiss xenolithes in the magmatic stock contain pyrite in veinlets, which are cut through by the magmatic intrusion. Therefore, the present magmatic rock overprints an earlier magmatic and hydrothermal event. The Bunardžik ore body (Fig. 3) shows the same minerali- zation as the Central Part ore body, but the ore-minerals are scarcer (ČIFLIGANEC, 1993). The mineralization of the Bunardžik ore body is hosted by Precambrian gneisses. In con- trast to the Central ore body, however, the Bunardžik ore body is crescent shaped adjacent to the andesitic intrusion and far from being symmetrical in relation to the andesite intrusion. The angles of dip of the outer surfaces outlining the orebody are smaller than the angles of the dip of the contact andesite intrusion. The andesite intrusion, also non-mineral ized, is situ- ated outside the orebody (Figure 3). The morphology of the Bunardžik orebody is mostly affected by the posi tion of the andesite intrusion. On plane, the Bunardžik orebody resembles a horse-shoe positioned around the southern part of the an- desite intrusion emplaced in gneiss. The dimensions of the body are 300 × 100 m at the surface with a 300 m depth (ČIFLIGANEC, 1993). The Vršnik ore body (Figure 3), which is located east of the Central ore body, is ellipsoidal in shape. In contrast to the afore-mentioned bodies, emplaced into gneiss, the Vršnik ore- body features mineralization chiefly hosted by the intrusions (andesite) and partly by the gneiss (Figure 3). In cer tain places, this is a single unique orebody, while elsewhere two parts can be distinguished. This orebody stretches over an interval of about 80 m (at the absolute height of 680-600 m). Its longer axis, in the N-S direction is 300 m long, while the width of the orebody centres around 200 m. The given parameters indicate that this orebody is very small in size (ČIFLIGANEC, 1993). 3.4. ANALYTICAL METHODS The numerous enclosed analytical data of samples from the Central ore body in the Buchim mine are taken between mine levels 680-560 m and ocassional samples from the Vršnik ore body between levels 685-650 m. The whole rock analyses (n=14) for major elements were carried out on Li-tetraborate pellets (lithium-tetraborate with a 1:5 mixture of Claisse M4 fluxer) using the X-ray fluorescence method (XRF; Institute of Geochemistry and Petrology; ETH Zürich). Trace element and REE determinations were conducted, also at the ETH Zürich, with laser abla tion-inductively coupled plasma-mass spectrometry (LA-ICP-MS) on the same Li-tetra borate pellets and on the zircon grains. The machine is equipped with an Excimer laser (ArF 193 nm) and a PE SCIEX Elan 6100 DRC ICP-MS. The spot size of the laser was 40 μm, and for calibra- tion the NIST 610 sta n da rd was used (GÜNTHER et al., 2001; HALTER et al., 2004). Isotopic analysis for Sr and Nd (iso- topic composition of Sr and Nd and Rb, Sr, Sm and Nd con- centrations) was mea su red at ETH Zürich using a TritonPlus Mass spectrometer (thermal ionisation mass spe ctro meter- TIMS) and at the Royal Holloway University of London (RHUL) using a VG354 TIMS with five movable Faraday cups and a Daly detector and ancilliary clean preparation la- boratories. Quantitative elemental analyses of the most interesting ore mineralization samples were pe r f o rmed under a JEOL JXA- 8200 Electron Probe Micro-Analyser WD/ED Combined Micro a na lyser (equipped with a SE- and BSE-detector, five- WDS crystal spectrometer and an EDS analyser) in the ana- lytical facilities at the Institute of Geochemistry and Petrolo- gy, ETH Zürich, Switzerland. The selected electron beam condi ti ons were a beam current of 20 nA at an acceleration voltage of 15 kV. An Optima dual inlet mass spectrometer was used with the following preparation systems attached to it: LaserPrep, de si gned and built at RHUL for laser heating of minerals in an atmosphere of BrF5 to release oxygen for the measurement of 18O/16O and 17O/16O ratios and Fisons (NCS EA1500 series 2), an ele me ntal analyser for flash co mbu stion of rocks, soils and vegetation in an oxygen atmo sphere to re- lease CO2, N2 or SO2 for isotopic analysis. With regard to δ13C and δ18O, syngenetic calcites were analyzed, while δ34S analy- sis was performed on hypogene sulfides (chalcopyrite, pyrite ±galena). Fluid inclusion studies were conducted at the Geological Department of the Royal Holloway University of London in the UK, on samples of doubly polished transparent wafers of quartz and calcite (150 μm thick), where for each sample, at least 20 inclusions were analysed. Microthermometric data were obtained using a Li nkam THMSG600 heating-freezing stage (temperature range –196°C to +600°C) and TMS 90 controller attached to a conventional petrographic microscope (Nikon and Olympus BX51). The stage was calibrated using the Synflinc synthetic fluid inclusions (pre ci s i on ± 0.1°C for freezing runs and ± 5°C for temperatures near to or higher than 360°C). Fluid inclusion homo genization temperatures Serafimovski et al.: Porphyry Cu mineralization related to the small Tertiary volcanic intrusions in the Bučim ore deposit... 107 were measured at least twice. The second measurement was carried out at a slow rate (4°C step per minute) close to the last 20°C approaching the previous mea su rement of homoge- nization temperature. 3.5. ORE MINERALOGY More than three decades of study of this deposit have shown that it is characterized by a complex mineral assemblage and mineral paragenesis. Numerous authors have studied the mine ral association in the Bučim deposit: IVANOV & JAS- MAKOVSKI (1970), ZARIĆ (1974), PA VI ČEVIĆ & RAKIĆ (1983), NEVENIĆ (1984), ČIFLIGANEC (1987), SERAFI- MOVSKI (1990, 1993); SERA FI MO VSKI et al. (1990); ČIFLIGANEC et al. (1997), TASEV (2003); SERAFIMOVS- KI et al. (2006); VOLKOV et al. (2010); SERAFIMOVSKI et al. (2013); LEHMANN et al. (2013) etc. A wide variety of minerals have been recognized in the Bučim deposit – both ore bearing and gangue minerals (Fig. 4). The mineral compo- sition of orebodies explored so far does not substantially dif- fer, although there are certain peculiarities in the mineral as- semblages. The major ore mineral is chalcopyrite accompanied by py- rite, magnetite, haematite, cubanite, valleriite, native Au and bornite. The ore mineralization in the Central Part, in the Bunardžik and Vršnik ore bodies, in terms of mode of occur- rence, mineral composition, association of elements, etc., is very similar. Differences can be seen only in the Čukar ore body. The Čukar ore body is a typical example of supergene mineralization in the deposit characterized by the increased grade of Cu but low ore reserves. The major ore minerals are chalcocite and covellite always accompanied by pyrite, teno- rite, rarely native Cu, malachite, azurite etc. Titanite, rutile, magnetite, haematite, chalcopyrite, pyrite, bornite, native Au, molybdenite, petzite, cala- verite, and argentite were identified as ore minerals. Enargite, tetrahedrite, galena, and sphalerite are less abundant. The ore minerali- zation was formed in the following sequence: titanite, rutile, and magnetite crystallized first, followed by pyrrhotite, cubanite, valleriite, and the early generation of chalcopyrite. After deposition of these minerals, the hydro ther- mal ore forming solution became enriched in sulfur, giving rise to pyrite crystallization. The late chalcopyrite and galena formed as the final stage of ore deposition (SERAFI- MOVSKI, 1993). The recent ore microscope study and elec- tron microprobe analyses have revealed that in the Bučim deposit, in addition to the previ- ously identified minerals of native Au and its tellurides (calaverite and krennerite (SERAFI- MOVSKI et al., 1992; SERAFIMOVSKI et al., 2006), electrum and petzite also occur (Ta- ble 1; Fig. 5). Gold content, within coarse-grained chal- copyrite, even in single grains of native Au show a large variation, ranging from 80% up to 92% Au (JEOL JXA-8200 Electron Probe; ETH Zürich). The content of Au within a sin- gle native Au grain may vary from 80.30% in the rim, up to 86% Au in the central part of the grain. It reflects changes in the physico- chemi cal conditions within the hydrothermal fluids during the mineralization. The most common form of Au is as native Au, electrum and petzite. Certain bismuth±selenium minerals (bis- muthinite, galenobismutite, krupkaite, frie- drichite, emplectite, cosalite, laitakarite and native bismuth) were also identified (Table 1; JEOL JXA-8200 Electron Probe; ETH Zürich). Bismuth-selenium minerals (contain- ing 41.7-99.5% Bi and 0.3-13.4% Se) appear Figure 4. Diagram of mineral successions that genetically belong to the Bučim porphyry hydrothermal Cu-deposit. Vol. 69/1 108 a) d) b) e) c) f) to be characteristic of the Au-bearing mineralization of the Bučim Cu porphyry deposit. Selenium is not common in the early paragenesis, whereas it is present in krupkaite up to 1.1% Se, emplectite 1.9-2.5% Se, while its highest concentration was determined in laitaka- rite at 13.5% Se. It is quite possible that during the deposition of laitakarite an influx of Se occurred in the hydrothermal solutions. Within the second ore paragenesis, which also con- tains particular amounts of bismuth, there are significant amounts of silver - up to 5.0% Ag, as well as low amounts of selenium, 0.3% Se. The most common mineral in the Bučim porphyry Cu de- posit is pyrite present at 3%, while chalcopyrite is the ma jor be a rer of Cu mineralization with a presence of 1%. The Au- Pd association has been determined within the pyrite and chalcopyrite of the major ore-bearing phase in the Central Part orebody. The studied pyrites belong to four different generations and increased concentrations of Au and Pd were determined in the so-called blocky pyrites or massive py rites. The latest microscope and micro probe study have de te rmined two main mineral assemblages: magnetite-py rite-chalcopyrite (mt-py-cp) and pyrite-chalcopyrite (py-cp), as the major hosts of Au and Pd. The high degree of geo che mical corre- lation between Au, Pd and As in py rite and chalcopyrite Figure 5. .Electron microprobe photographs of Au and Bi-Se minerals from the Bučim deposit: a) Electrum (white) in chalcopyrite (dark grey), x182; b) Petzite (white-whitegrey) in cha lco py rite (dark), x401; c) Laitakarite-emplectite (whitegrey) in hydrothermally-altered rock (dark), ba cksca ttered electron image, x300; d) Bismuthinite (white) along chalcopyrite (grey) in hydrothermally-altered rock (dark), x600; e) Zoned aikinite-bismuthinite aggregate (grey) hosting galena (white) tri angular form, x3000; f) Needle-like cosalite crystals, scanning electron micro- scope. x301. Table 1. Quantitative microanalyses of newly determined Bi, Bi-Se and Au±Te minerals in the Bučim deposit. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Bi (%) 99.52 97.43 78.32 79.83 54.67 52.92 55.38 61.65 64.81 41.69 42.63 80.11 - - Pb (%) 0.18 - 1.62 - 26.64 20.68 21.05 - - 33.38 30.03 2.21 - - Cu (%) - 0.42 0.47 1.82 0.92 6.28 6.55 15.06 13.9 - 9.5 - 1.26 0.52 Au (%) - - - - - - - - - - - - 72.53 26.84 Ag (%) - - - - - 0.99 1.59 4.96 0.7 - - - Fe (%) 1.14 - 1 01 - - - 1.9 1.07 - - - 0.68 - As (%) - - - - 0.32 - - - - - - 25.42 41.09 Se (%) - - - 1.12 - 1.85 2.57 0.26 - 13.41 - - Te (%) - - - - - - - - - - 1.1 - 31.23 S (%) - 19.17 17.26 18.42 17.53 17.71 18.42 15.9 16.84 17.2 34 - - Σsum 99.7 98.99 99.58 99.92 100.75 99.75 100.69 99.87 99.84 97.13 100.06 99 93 99.89 99.68 1. Native bismuth; 2. Native bismuth; 3. Bismuthinite; 4. Bismuthinite; 5. Galenobismutite; 6. Krupkaite; 7. Krupkaite; 8. Emplectite; 9. Emplectite; 10. Cosalite; 11. Friedrichite; 12. Laitakarite; 13. Electrum; 14. Petzite. Serafimovski et al.: Porphyry Cu mineralization related to the small Tertiary volcanic intrusions in the Bučim ore deposit... 109 points to a wide range of physico-chemical conditions and the inter play between ma gma tic and hydrothermal processes during formation of the deposit. The Au-Pd phase occurs as a separate mineral phase, which is disti ngu ished by a special colour (pink grey; Fi g . 6a). The Au content in the studied pyrite is within the range of 0.12– 7.54% Au while the Pd content is within the ra nge 0.01–6.33% Pd, and they are presented as a special mixture of mineral phases characterized by their gray colour (Figure 6a; Table 2). Increased concentrations of Au-Pd in chalcopyrite are re- lated to the massive, medium-to-high temperature, coarse- graind chalcopyrite, which constitutes the major ore phase within the Bučim deposit (Table 2). Ho we ver, As in chalcopy- rite shows lower values here compa red to those in pyrite. The inc r ea sed content of Pd as well as Pd-minerali zation in the Cu-Au ores of the deposit in Bučim, Macedonia has also been determined in Bor-Ma j da npek, Se r bia (JANKOVIĆ, 1990), Skouries, Greece (TARKIAN et al., 1991; ECO NO MOU- ELIO PO ULOS, 2010), and Ela tsite, Bulgaria (PETRU NOV et al., 1992), wh ere the Cu-po rphyry style of hydrothermal PGE has also be en observed. Platinum concentrations were deter- mined only as trace amounts. 3.6. STABLE ISOTOPE DATA 3.6.1. Sulfur Isotope Composition Data Sulfur isotope compositions (δ34S ‰) normalized to the Can- yon Diablo Meteorite (CDM, δ34S=0.0‰) show a narrow range of variance from +6 ‰ to –4 ‰, po inting to a sulfur ori- gin from the upper mantle, (the fractionation sulfur which has ori gi nated from the Upper Mantle or deep homogenized parts Figure 6. a) Electron microprobe photograph of pyrite (dark) and Au-Pd phases (light grey) and b) Electron microprobe photograph of chalco- pyrite, with point analysis. a) b) 1 2 3 4 5 6 7 8 9 10 11 12 Au (%) 6.98 0.21 7.75 6.51 0.12 7.54 6.34 0 6.46 0.29 9.1 7.29 Fe (%) 39.29 43.64 39.18 39.98 45.46 43.56 25.92 29.08 25.13 29.11 25.97 25.73 S (%) 44.65 53.93 46.17 44.4 53.53 47.34 28.74 34.32 29.74 33.6 26.96 28.64 Cu (%)