Geological Survey of Denmark and Greenland Bulletin 31, 2014, 95-98 95 To what extent is Denmark vulnerable to mineral supply shortage? Per Kalvig, Rune J. Clausen, Niels Fold and Karen Hanghøj Mineral resources are building blocks of modern society and essential for progress and prosperity. Mankind has always de- pended on access to mineral raw materials, which have been a key factor for wealth, culture and development. Modern societies are characterised by a rapidly increasing demand for specialised mineral raw materials, determined by their stage of technological development, the number of consum- ers, and their standard of living. Generally, the availability of mineral raw materials has not, until recently, been consid- ered an issue by the average consumer or by companies in the downstream end of the value chains, and mineral resources have not been part of the political agenda. In this context China’s control over rare-earth elements (REE) has been an eye opener to both industry and politicians worldwide, and has subsequently led to discussions about the possible exhaustion of finite resources and potential threats to the availability of raw materials caused by geopolitical tension and market restrictions. The increased concern has lead to several attempts to assess the risk of supply shortage which are however still at a rather qualitative stage. Inadequate knowledge about the current and future demand for mineral raw materials prevents politi- cal and industrial decision-makers from taking the necessary actions to predict and mitigate the national and industrial vulnerability to supply shortage. Thus, most modern socie- ties, including Denmark, are vulnerable to mineral raw ma- terials scarcity, but unaware of where and how it may appear, and how to prevent and address the problem. Scarcity issues Scarcity issues have been discussed since Thomas Malthus in 1798 initially predicted problems of food shortage due to increasing population and later also in relation to mineral resources. A number of organisations and individuals (e.g. Club of Rome, Gro Harlem Bruntland) have taken the lead in these discussions and emphasised that natural resources are finite and limited and that the global economy is growing disproportionately. At the summit meeting in Rio de Janeiro in 1992, all na- tions were encouraraged to adopt the so-called Bruntland principles to ensure sufficient resources for future genera- tions. The term sustainability was introduced to the mining industry. However, no clear effects can be identified neither in the policies nor in the overall mineral consumption, and global and national concern on how to secure raw material supply is increasing. Terms such as critical minerals were in- troduced, reflecting the risk of scarcity of some raw materials. The US National Research Council quantitatively addressed scarcity issues related to minerals in 2008 (National Re- search Council 2008), and since then a substantial number of reports have focused on the topic (e.g. Rosenou-Tornow et al. 2009; European Commission 2010; UNDP 2010; Graedel et al. 2012). The decoupling of wealth and mineral resource consumption remains to be seen. Why are minerals important? Mineral-based materials are present everywhere in our daily life – in houses, cars, computers, cooking utensils, paint, tiles, paper, plastic, batteries, wind turbines, roads, pipes etc. For each and all of these ‘end products’ the choice of raw materials – and thus the minerals that need to be mined – depends on the required physical and chemical properties of the products. In some cases more than one material may fulfil the product requirements and the choice will then be based on price and availability. All societies need mineral resources for their develop- ment, but exactly which minerals and metals are in demand and how they are used depend on the stage of development of the particular society. During historic time the trend has been very clear; innovation and new technologies require an increasing number of specialised raw materials. Consequent- ly, we need to explore for new types of minerals to meet new demands. The demand for minerals is fueled by a number of drivers Demographics – The United Nations has estimated that the world population will increase from currently 7 billion to 9 billion by 2050 and that about 6.5 billion people will © 2014 GEUS. Geological Survey of Denmark and Greenland Bulletin 31, 95–98. Open access: www.geus.dk/publications/bull 9696 live in cities in 2050. This trend creates a need to develop new infrastructure to support the fast-growing urbanisation, which in turn creates an increased demand for minerals, in particular sand, gravel, iron and copper. Numerous other raw materials are also needed for basic infrastructure. Wealth – The economic growth in some of the emerging markets – e.g. Brazil, Russia, India, Indonesia, China, the Republic of Korea, South Africa – creates millions of new customers for products like houses, household machines, bi- cycles, cars, computers, etc. These are all manufactured from raw materials which have to be mined and processed. An ex- ample of this is China that has the world’s largest population and is globally the largest consumer of copper, aluminium and iron. However, the consumption of copper in China is still only 3 kg/person/year, much lower than in Europe where the consumption is 16 kg/person/year (Bogner 2012). However, it is expected that China’s copper consumption will increase substantially mainly as a result of growing wealth, rather than just the growing population. Technology – The introduction of new materials, for exam- ple in houses and vehicles, in new electronic communication equipment and in new ‘green’ energy technology, changes the desired physical and chemical properties of materials, which in turn creates demand for new mineral raw materials. Emerging technologies and new materials have created a rap- idly growing demand for certain commodities such as indi- um and gallium used in light-emiting diode lamps; lithium, copper, neodymium and dysprosium used in electric cars; indium, cadmium and tellurium in photovoltaic thin-film and dysprosium and neodymium in magnets. Concurrently, the need for some traditional materials has been reduced. For example, light, strong materials such as aluminium and mag- nesium have reduced the amount of steel required to build car frames. Critical minerals and vulnerability to supply restrictions During the past decade mineral resource shortage has made headlines in the media, especially with regard to the REE. In response, a number of institutions have developed lists of mineral criticality on regional and national levels. For ex- ample, the European Union has defined 14 raw materials as critical to the EU (European Commission 2010). Typically, the studies have used a two-fold approach: (1) assessment of the supply risk and (2) assessment of the impact of an actual shortage. The term critical minerals is frequently used in this context. Critical minerals are those which are important to Su pp ly r isk Geological, technological, and economic Social and regulatory Geopolitical National vulnerability to supply restriction ImportanceSubstitutabilitySusceptibility 1 3 2 4 Fig. 1. Diagram of vulnerability to the supply risk and restriction (modified from Graedel et al. 2012). In the diagram element 1 has a low supply risk and even if a supply shortage occurs, this will not have a great impact on society; element 4 has a high supply risk and society is vulnerable to sup- ply restictions; element 2 possesses a high supply risk but low vulnerability to supply restrictions; and for element 3 the opposite situation occurs, the supply risk is low, but in the event of a supply risk the national vulnerability is high. 97 society and subject to a specific availability or supply risk, e.g. at the corporate, national, regional or global industry level. Scarcity is the potential outcome of criticality if a supply risk is not effectively mitigated. Scarcity can be a result of several factors such as political conflicts, embargos, cartels, natural disasters, sudden increases in demand, inadequate investment in new mines and processing facilities or resource depletion. Resource depletion causing significant shortages of mineral commodities has not yet been documented except in the case of cryolite, but it may pose a long-term threat. Based on long- and medium-term supply risk Graedel et al. (2012) assessed the vulnerability to supply shortage and identified three general components, namely (1) geology, technology and economy; (2) social and regulatory factors and (3) geopolitical factors. Each of these were specified by six indicators, forming the ‘supply risk axis’. The ‘vulner- ability to supply restrictions axis’ is composed of another set of factors such as (1) importance, (2) substitutability and (3) susceptibility specified in eight indicators (see Figs 1, 2). Graedel et al. (2012) suggested that vulnerability should also include the environmental impact. Forecasting and creating possibilities for adequate policies The value chains for mineral raw materials include all stag- es of mineral exploration, mining and the processes trans- forming the minerals into intermediate goods applicable for manufacturing by industrial end users. However, most of the companies in the chain may be unaware of short- or long-term market constraints or opportunities. This pre- vents the industry itself from responding to sudden changes in demand. The exploration that targets new raw materi- als is therefore driven by commodity prices. Globally, 2556 companies spent 20.5 billion US$ on mineral exploration in 2012, of which 49% was spent on gold, 32% on base metals and the remaining 19% on all other commodities (Wilburn & Stanley 2013). This illustrates that the exploration sector is decoupled from the end user demand. Furthermore, there is a mismatch between the time scales of action in different parts of the value chain. Industrial demand for new raw ma- terials and markets for raw materials fluctuate on short-time scales, whereas the time needed to adjust the supply is much longer; it typically takes more than ten years to open a new mine, and sometimes even substantially longer. Scrap sup- plies for recycling, secondary raw materials, are insufficient and usually too expensive to handle in order to bridge the gap between short-term demand and supply. Individual governments and their institutions need up- dated assessment data on the national vulnerability to sup- ply restrictions of mineral raw materials in order to develop and implement policies to avoid scarcity of particular criti- cal minerals. For example, the general conditions for Europe may not necessarily be accurate and relevant for the Danish industrial and agricultural sectors. So far, only very limited data on vulnerability to supply restrictions are available for Substitutability SusceptibilityImportanceComponent Indicator 87.5 (75–100) 62.5 (50–75) 37.5 (25–50) 12.5 (0–25) National economic importance Net import reliance ratio Net import reliance Global inno- vation index Substitute performance Substitute availability Environmental impact ratio See equation in SI Score for percentage of population utilising Percentage of population utilising Supply risk score of substitute See equation in SI See equation in SI See equation in SI See equation in SI Poor Adequate Good Exemplary Sc or e Fig. 2. Components of the valuation methodolog y for the vulnerability to supply restriction, detailing the X-axis in Fig. 1 (from Graedel et al. 2012). Sup- porting Information (SI) is detailed in: http://pubs.acs.org/doi/suppl/10.1021/es203534z/suppl_ file/es203534z_ si_001.pdf 9898 public and private stakeholders in Denmark. In 2013, the Geological Survey of Denmark and Greenland (GEUS) es- tablished the Center for Minerals and Materials (MiMa) to identify and study the most important raw material value chains. The Danish government subsequently decided to strengthen the knowledge about criticality, vulnerability and scarcity of raw materials and have requested MiMa to carry out a three-year research programme to complete a vulner- ability analysis for Denmark. MiMa is currently identifying an adequate approach for this programme. Danish industry is characterised by an advanced downstream sector that de- pends on many imported components in end-product as- semblages, while manufacturing of upstream products based on primary raw materials is of lesser importance. However, regardless of where the Danish manufacturing activities be- long in the value chains, they are all based on mineral raw materials, some of which may be classified as critical miner- als. It is important to examine and map the extent to which Denmark is subject to supply restrictions and to understand the implications of such vulnerability. Danish consumers may not be aware of a product’s requirements with regard to raw materials, and thus remain unaware of a potential sup- ply problem attached to the product. Statistically, Denmark monitors export and import of all goods in compliance with international categories for goods and industries, but there is a need for more knowledge about the amount and types of processed raw materials in these goods and components used by Danish industry. MiMa and its partners will inves- tigate these issues further and disseminate results, analyses and forecasts. Conclusions Denmark, like all other countries, depends on mineral raw materials – domestic and imported – to sustain and develop society and is thus vulnerable to mineral raw materials scar- city. However, most consumers and companies in the down- stream parts of the value chains as well as decision makers in the administration and industry are relatively unaware of this. It is the aim of the Center for Minerals and Materials, MiMa, to build knowledge and disseminate information for the Danish society about mineral resource supply risks and vulnerability to supply restrictions. References Bogner, S. 2012: The commodity megatrend. Resource Investor (www.re- sourceinvestor.com/2012/05/09/the-commodity-megatrend). European Commission 2010: Critical raw materials for the EU. Report of the ad-hoc working group on defining critical raw materials, 84 pp. Brussels: European Commission. Graedel, T.E. et al. 2012: Methodolog y of metal criticallity determination. Environmental Science & Technolog y 46, 1063–1070. Malthus, T.R. 1798: An Essay on the Principle of Population, 388 pp. Lon- don: J. Johnson. National Research Council 2008: Minerals, critical minerals, and the U.S. economy. Washington, DC: The National Academies Press. Rosenau-Tornow, D., Buchholz, P., Riemann, A. & Wagner, M. 2009: Assessing the long-term supply risks for mineral raw materials – a combined evaluation of past and future trends. Resources Policy 34, 161–175. UNDP 2010: Human development report 2010 – 20th anniversary edi- tion. The real wealth of nations: pathways to human development, 238 pp. Published for the United Nations Development Programme. Bas- ingstoke: Palgrave MacMillan. Wilburn, D.R. & Stanley, K.A. 2013: Exploration review. Annual review 2012. Mining engineering, May 2013, 22–42. Authors’ addresses P.K., R.J.C. & K.H., Geological Survey of Denmark and Greenland, Øster Voldgade 10, DK-1350 Copenhagen K, Denmark; E-mail: pka@geus.dk N.F., Department of Geosciences and Natural Resource Management, Øster Voldgade 10, DK-1350 Copenhagen, K, Denmark. http://www.resourceinvestor.com/2012/05/09 http://www.resourceinvestor.com/2012/05/09 mailto:pka@geus.dk