Geological Survey of Denmark and Greenland Bulletin 7, 2004, p 9-12 9 Although it was for many years believed that coals could not act as source rocks for commercial oil accumulations, it is today generally accepted that coals can indeed generate and expel commercial quantities of oil. While hydrocarbon gen- eration from coals is less well understood than for marine and lacustrine source rocks, liquid hydrocarbon generation from coals and coaly source rocks is now known from many parts of the world, especially in the Australasian region (Mac- Gregor 1994; Todd et al. 1997). Most of the known large oil accumulations derived from coaly source rocks have been generated from Cenozoic coals, such as in the Gippsland Basin (Australia), the Taranaki Basin (New Zealand), and the Kutei Basin (Indonesia). Permian and Jurassic coal-sourced oils are known from, respectively, the Cooper Basin (Au- stralia) and the Danish North Sea, but in general only minor quantities of oil appear to be related to coals of Permian and Jurassic age. In contrast, Carboniferous coals are only associa- ted with gas, as demonstrated for example by the large gas deposits in the southern North Sea and The Netherlands. Overall, the oil generation capacity of coals seems to in- crease from the Carboniferous to the Cenozoic. This suggests a relationship to the evolution of more complex higher land plants through time, such that the highly diversified Ceno- zoic plant communities in particular have the potential to produce oil-prone coals. In addition to this overall vegeta- tional factor, the depositional conditions of the precursor mires influenced the generation potential. The various aspects of oil generation from coals have been the focus of research at the Geological Survey of Denmark and Greenland (GEUS) for several years, and recently a worldwide database consisting of more than 500 coals has been the subject of a detailed study that aims to describe the oil window and the generation potential of coals as a function of coal composition and age. Depositional conditions Hydrocarbons are derived from the aliphatic chains in the organic matrix. The dominant organic matter in conven- tional marine source rocks (type II kerogen), and also lacus- trine source rocks (type I kerogen), is formed from algae. This type of organic matter is geochemically quite uniform and contains an abundance of long-chain n-alkanes, a prerequi- site for oil formation. Coals are composed of transformed higher land plant material (mainly vitrinite or type III kero- gen) and are compositionally much more heterogeneous and complex. Compared to algae-derived organic matter, the organic matter is richer in oxygen and contains fewer long- chain n-alkanes. Therefore coals inherently have lower oil generation potential. However, paralic coals that have been influenced by seawater during deposition may be enriched in hydrogen (higher H/C ratios; Figs 1, 2; Petersen & Rosen- berg 1998; Sykes 2001), and incorporation of the hydrogen into aliphatic chains may increase the generation capacity. Hydrogen enrichment is related to the activity of sulphate -reducing bacteria, and is commonly associated with in- creased contents of sulphur (Fig. 1). In the Søgne Basin (North Sea), for example, a clear facies-related change in gene- ration potential is recorded for Middle Jurassic coal source rocks. The coals were formed on marine-influenced coastal Geological Survey of Denmark and Greenland Bulletin 7, 9–12 (2005) © GEUS, 2005 Oil generation from coal source rocks: the influence of depositional conditions and stratigraphic age Henrik I. Petersen C e n o zo ic Ju ra ss ic P e rm ia n C ar b o n if e ro u s > 1% sulphur (d.a.f.) 0.5–1% sulphur (d.a.f.) < 0.5% sulphur (d.a.f.) 0 0.1 0 0.4 0.2 0.8 0.6 1.4 Type I Type II Type III 1.2 1 H /C ( at o m ic r at io ) O/C (atomic ratio) 0.2 0.3 Fig. 1. The H/C ratio of coals from the major coal-forming geological periods displayed on the so-called ‘van Krevelen diagram’. Note that coals with a low sulphur content have a tendency to plot towards the lower part of the ‘Type III’-band and coals with a higher sulphur con- tent towards the upper limit of the band. This feature is not related to coal age; d.a.f., dry ash-free. plains, and the thickest, most landward parts of the coals gene- rated gas and condensate (Harald Field and Trym discovery), whereas the coals that formed close to the palaeo-coastline generated oil (Lulita Field; e.g. Petersen et al. 2000; Petersen & Brekke 2001). The influence of depositional conditions on the generation potential is independent of coal age (Fig. 2; Petersen in press). The depositional conditions of peat-form- ing mires may thus help to predict the source rock quality of the coals. Generation potential The evolution of the generation potential (Hydrogen Index = HI) with increasing maturity is shown in Fig. 2. The major- ity of the coal samples fall within a band that narrows with increasing maturity due the gradual homogenisation of the organic matter. The generation potential is exhausted around a vitrinite reflectance of 2.0% Ro, but the coals may still pos- sess a considerable potential (HI up to 190 mg HC/g TOC) at the end of the conventional oil window at about 1.3% Ro. A prominent feature of the HI-band is the initial increase in HI up to a maximum HI-value (e.g. Huc et al. 1986; Sykes 2001; Petersen 2002, in press), defined by the HImax line between 0.6% Ro and 1.0% Ro. The increase in HI is caused by the formation of an additional generation potential due to structural reorganisation of the coal matrix, possibly inclu- ding incorporation of water-derived hydrogen (Lewan 1997; Schenk & Horsfield 1998). This means that the ‘true’ genera- tion potential of coals is equivalent to the HImax, which is derived by translating the coals along their maturation path- way to the maximum value (Fig. 2; Sykes & Snowdon 2002). Coals with an HImax < 150 mg HC/g TOC are considered to be mainly gas-prone (Fig. 2). Compared to Carboniferous, Permian and Jurassic coals, Cenozoic coals attain the highest HImax values (HImax = 250–370 mg HC/g TOC; Petersen in press). However, the HImax value may not necessarily be an expression of the ability to generate oil. The type of generated petroleum is dependent on the chain length of the n-alkanes in the coal structure. The HI is a measure of the hydrogen in the coal, but this may not be present as long-chain n-alkanes, but rather as shorter chains with a potential to form only gas or condensate. This may particularly be the case for Carboni- ferous coals. Coals with approximately similar HI values should theo- retically contain the same proportion of hydrogen and thus have potentially the same petroleum generation capacity. Information about the type of generated petroleum can be obtained by investigating the chain length of the n-alkanes in the solid coal structure by Fourier Transform Infrared spec- trometry (FTIR) and by ruthenium tetroxide catalysed oxi- dation. The peak at 2850 cm–1 in the FTIR spectrum is used to estimate the relative proportion of CH2 (dry, ash-free basis), which is taken as a measure of the proportion of oli- phatic chains in the coal (Fig. 3). In general, Carboniferous coals contain a lower proportion of CH2 compared to Ceno- zoic and Jurassic coals with similar HI values. Similarly, the proportion of aliphatic hydrogen is lower for Carboniferous coals (Fig. 3). Cenozoic coals also have significant gas poten- tial (estimated from the CH3 peak at 2955 cm –1), which is in good agreement with the coal-sourced South-East Asian oil fields, that commonly also contain significant proportions of gas (e.g. the Kutei Basin, Indonesia). Ruthenium tetroxide catalysed oxidation of the coal structure essentially ‘chops’ off the aliphatic chains in the coal matrix, which after appropri- ate chemical treatment can be analysed by gas chromatogra- phy - mass spectrometry (GC-MS). By adding an internal standard the obtained chromatograms can be directly com- pared. In general, Carboniferous coals contain low proportions of n-alkanes with a carbon number > C19, whereas Cenozoic coals in particular are much richer in long-chain aliphatics. The difference in the chemical structure between, for exam- 10 Fig. 2. Evolution in the Hydrogen Index (HI) with increasing maturity shown by 507 coal samples (Petersen in press). Coals with an HI < 150 mg HC/g TOC are considered mainly gas-prone (shaded area). Coals with increased sulphur contents have a tendency for higher HI values due to hydrogen-enrichment in the coal-structure. During initial thermal maturation the HI increases to a maximum value (HImax), which is a bet- ter estimate of the true generation potential of a coal. The HImax can be estimated by translating the HI value for a coal along its maturation pathway to the HImax line (Sykes & Snowdon 2002); for example the coal with an HI of 185 (blue star) shows a correction of HI by 50 mg HC/g TOC (HImax = 230 mg HC/g TOC); d.a.f., dry ash-free. 0 0.5 1.51 2 2.5 3 C e n o zo ic Ju ra ss ic P e rm ia n C ar b o n if e ro u s > 1% sulphur (d.a.f.) 0.5–1% sulphur (d.a.f.) < 0.5% sulphur (d.a.f.) 500 400 300 200 100 185 235 0 ga s- p ro n e o il -p ro n e H y d ro ge n I n d e x ( m g H C /g T O C ) Vitrinite reflectance (%Ro) ~0.60%Ro ~1.0%Ro Line of HImax H H ple, Carboniferous and Cenozoic coals, can be related to the original coal-forming vegetation, and may explain why Carboniferous coals are principally gas- or condensate-prone, whereas Cenozoic coals can be highly oil-prone. In contrast to the Carboniferous woody, gymnospermous mire vegeta- tions, the Cenozoic coals were formed from an advanced and diverse vegetation, which may have produced a more ali- phatic-rich vitrinitic organic matter upon deposition. The effective oil window (oil expulsion window) The complex, heterogeneous composition of coals results in a three-phase oil generation model (Fig. 4; Petersen in press): (1) onset of hydrocarbon generation, (2) hydrocarbon build- up in the coal to the expulsion threshold, and (3) oil expul- sion in the so-called effective oil window. Figure 4 shows the free hydrocarbons in the coals with increasing maturity. From 0.6–0.7% Ro to 0.85–1.0% Ro, the amount of oil increases in the coals up to a maximum value, after which it decreases. This decrease indicates the onset of efficient oil expulsion, and the maximum BI-value thus corresponds to the start of the effective oil window (oil expulsion window). The matu- rity at which oil expulsion starts and the range of the effective oil window is dependent on the initial generation potential of the coals (Fig. 4). It should, however, be noted that the effec- tive oil window for coals extends to higher maturities than the conventional oil window. Coals generating < 12 mg HC/g 11 Fig. 4. Evolution in Bitumen Index (BI = S1 / TOC) with increasing matu- rity. Initially, hydrocarbons build up in the coal to a maximum value, which indicates the start of the effective oil window. Coals with < 12 mg HC/g TOC (shaded area) are considered to have a limited expulsion efficiency (gas-prone). In general, Cenozoic coals generate the highest amounts of hydrocarbons, and they also reach the expulsion threshold at the lowest maturities as shown by the extension of the expulsion line down to 0.65% Ro. (A) Carb. (B) M. Jurassic (A) Carb. (B) M. Jurassic3000 2950 28502900 2800 2750 cm-1 Carboniferous coal, Ruhr, Germany M. Jurassic coal, Danish North Sea CH2 CH3 Hal/H (wt.%, d.a.f.) Hal/mg coal (d.a.f.) 2850 cm-1: symmetric CH2 2955 cm-1: asymmetric CH3 H/C = 0.76 HI = 182 0.83%Ro H/C = 0.79 HI = 205 0.82%Ro A B C 60 40 20 0 B it u m e n I n d e x ( m g H C /g T O C ) ~0.65%Ro ~0.85%Ro ~1.0%Ro ~1.05%Ro Gas-prone 0 0.5 1.51 2 2.5 3 Vitrinite reflectance (%Ro) Start of the effective oil window (oil expulsion window) Unknown age Cenozoic Jurassic Permian Carboniferous Fig. 3. A: FTIR spectra (aliphatic stretching region) of Carboniferous and Middle Jurassic coals with similar H/C ratios, HI values, and vitrinite reflectances. The Middle Jurassic coal shows a much higher relative response at 2850 cm–1, which is an indication of a higher proportion of aliphatic chains in the coal structure. B: Calculated relative proportions of aliphatic chains (CH2) and CH3. C: Calculated relative proportions of aliphatic hydro- gen. The low values for the Carboniferous coal suggest a primary gas generation potential; d.a.f., dry ash-free. 12 TOC are considered to possess a limited oil expulsion effi- ciency. Cenozoic coals generate the largest amounts of hydrocar- bons and they tend to reach the expulsion threshold at the lowest maturities (from 0.65% Ro; Fig. 4). The broadest effective oil window is thus related to Cenozoic coals, and may extend from approximately 0.65–2.0% Ro. Jurassic, Permian and Carboniferous coals reach the start of the effec- tive oil window at higher maturities (0.85–0.9% Ro). The Jurassic coals show some ability to generate and expel hydro- carbons, whereas several of the Carboniferous and Permian coals seem to have a limited expulsion efficiency; these coals are principally gas-prone. As described above, the organic matter in Carboniferous coals possesses an inherently low ability to generate oil. Hence, the effective oil window for the Carboniferous coals is in reality an effective gas/condensate window. Conclusion Coals can act as source rocks for oil accumulations. The gene- ration potential is related to the depositional conditions of the coal-forming mires, with marine influence having a posi- tive effect by increasing the hydrogen content in the vitrinitic organic matter. In addition, an overall vegetational control seems to be exerted on the source rock potential. Carboni- ferous coals contain lower proportions of long-chain n-alka- nes and aliphatic hydrogen in the coal matrix than younger coals. Cenozoic coals generally contain high proportions of long-chain n-alkanes and possess a high oil generation poten- tial in addition to a high gas potential. During maturation, coals form an additional generation potential, and hydrocar- bon generation can be described as a three-phase process, including a hydrocarbon build-up phase in the coals before onset of efficient expulsion. The effective oil window starts at higher maturities than the conventional oil window, and in addition extends to higher maturities. Cenozoic coals display the broadest effective oil window, whereas the effective oil window for Carboniferous coals is, in reality, an effective gas/condensate window. This enhanced understanding of oil generation from coal source rocks is being directly employed by GEUS in petroleum geological projects that are being car- ried out, for example, in Vietnam (cf. Nielsen & Abatzis 2004). Acknowledgement The Carlsberg Research Foundation (ans-1293 & ans-1293/20) is thanked for financial support. References Huc, A.Y., Durand, B., Roucachet, J., Vandenbrouke, M. & Pittion, J.L. 1986: Comparison of three series of organic matter of continental ori- gin. Organic Geochemistry 19, 191–204. Lewan, M.D. 1997: Experiments on the role of water in petroleum for- mation. Geochimica et Cosmochimica Acta 61, 3691–3723. MacGregor, D.S. 1994: Coal-bearing strata as source rocks – a global review. In: Scott, A.C. & Fleet, A.J. (eds): Coal and coal-bearing strata as oil-prone source rocks? Geological Society Special Publication (London) 77, 107–116. Nielsen, L.H & Abatzis, I. 2004: Petroleum potential of sedimentary basins in Vietnam: long-term geoscientific co-operation with the Vietnam Petroleum Institute. Geological Survey of Denmark and Greenland Bulletin 4, 97–100. Petersen, H.I. 2002: A re-consideration of the ‘oil window’ for humic coal and kerogen type III source rocks. Journal of Petroleum Geology 25, 407–432. Petersen, H.I. in press: The petroleum generation potential and effective oil window of humic coals related to coal composition and age. International Journal of Coal Geology. Petersen, H.I. & Brekke, T. 2001: Source rock analysis and petroleum geochemistry of the Trym discovery, Norwegian North Sea: a Middle Jurassic coal-sourced petroleum system. Marine and Petroleum Geology 18, 889–908. Petersen, H.I. & Rosenberg, P. 1998: Reflectance retardation (suppres- sion) and source rock properties related to hydrogen-enriched vitri- nite in Middle Jurassic coals, Danish North Sea. Journal of Petroleum Geology 21, 247–263. Petersen, H.I., Andsbjerg, J., Bojesen-Koefoed, J.A. & Nytoft, H.P. 2000: Coal-generated oil: source rock evaluation and petroleum geoche- mistry of the Lulita Oilfield, Danish North Sea. Journal of Petroleum Geology 23, 55–90. Schenk, H.J. & Horsfield, B. 1998: Using natural maturation series to evalu- ate the utility of parallel reaction kinetics models: an investigation of Toarcian shales and Carboniferous coals, Germany. Organic Geoche- mistry 29, 137–154. Sykes, R. 2001: Depositional and rank controls on the petroleum poten- tial of coaly source rocks. In: Hill, K.C. & Bernecker, T. (eds): Eastern Australasian Basins Symposium, a refocused energy perspective for the future. Petroleum Exploration Society of Australia Special Publi- cation, 591–601. Sykes, R. & Snowdon, L.R. 2002: Guidelines for assessing the petroleum potential of coaly source rocks using Rock-Eval pyrolysis. Organic Geochemistry 33, 1441–1455. Todd, S.P., Dunn, M.E. & Barwise, A.J.G. 1997: Characterizing petroleum charge systems in the Tertiary of SE Asia. In: Fraser, A.J., Matthews, S.J. & Murphy, R.W. (eds): Petroleum geology of Southeast Asia. Geolo- gical Society Special Publication (London) 126, 25–47. Author’s address Geological Survey of Denmark and Greenland, Øster Voldgade 10, DK-1350 Copenhagen K, Denmark. E-mail: hip@geus.dk