e2019430204-01 Basement highs are large structural features, commonly bur- ied in sedimentary basins (Busby & Azor 2012). They are of interest for natural resources exploration and research be- cause of their ability to influence migration and entrapment of petroleum (Trice 2014) and water, and the deposition of metals (Hitzman 2005; Borg et al. 2012). Three-dimensional (3D) reservoir models (e.g. Shepherd 2009) are built to evalu- ate and model fluid-filled basement reservoirs (Ringrose & Bentley 2015). However, subsurface data are expensive, diffi- cult to obtain and are often widely spaced. Ideally, basement reservoir models would be constrained by rock, fracture and mineral vein data from appropriate outcrop analogues (ac- knowledging that subaerial basement rocks have, by defini- tion, a different uplift history than subsurface basement). The Liverpool Land Basement High (LLBH) in Greenland is an uplifted and well-exposed basement high located be- tween two sedimentary basins, and thus provides a valuable analogue for fractured basement-hosted mineral, oil and geo- thermal reservoirs. The Geological Survey of Denmark and Greenland (GEUS) conducted reconnaissance work on the LLBH in 2018 to assess the quality of the exposure of basement pal- aeo-weathering profiles and fault-fracture networks. Here, we introduce the LLBH, the concept of fractured basement Liverpool Land Basement High, Greenland: visualising inputs for fractured crystalline basement reservoir models Graham Banks*1, Stefan Bernstein1, Sara Salehi1, Pierpaolo Guarnieri1, Dennis Bird2, Catherine Hamblett3, David Peacock4 and Jon Foster5 GEUS Bulletin is free to individuals and institutions in electronic form. The author(s) retain copyright over the article contents. REVIEW ARTICLE | OPEN ACCESS GEUS Bulletin Vol 43 | e2019430204 | Published online: 22 July 2019 https://doi.org/10.34194/GEUSB-201943-02-04 Viking Graben Faroe-Shetland Basin Møre Basin Vøring Basin M ør e- Tr øn de la g Fa ul t C om pl ex M T G G F H BF SU F Re yk ja ne s Ri dg e K im be rly R id ge Ae gi r R id ge W Jan Mayen FZ E Jan Mayen FZ Jan Mayen microcontinent Tjörnes FZ SystemGreenland- Iceland Ridge Iceland- Faroe RidgeIceland Shelf Iceland Basin 60°N 10°E PZEG Rockall Basin ? ? Oceanic elements: High (including platforms, terraces and intra-basinal elevations) Basin Continental elements: Continent-ocean boundary Active mid-ocean ridge rift system Normal fault Reverse fault Strike-slip/transcurrent fault Fault (unspecified) 1:10,000,000 0 100 200 300 Km Geodetic Reference System: WGS 1984 Projection: Lambert Conformal Conic with Central Meridian: -40, Std. Parallels: 55, 75 UK Iceland G re en la nd N or w ay LF UH Fig. 2B Fig. 2A LLBH LLB N JLB Fig. 1. Locations of North Atlantic Ocean sedimentary basins (blue) and highs (pink). Liverpool Land Basement High (LLBH), Liverpool Land Basin (LLB) and Jameson Land Basin (JLB) are located on the western North Atlantic conjugate margin. The Lancaster field (LF) and Utsira High (UH) basement petroleum reservoirs are located on the eastern North At- lantic conjugate margin (modified from Hopper et al. 2014). https://doi.org/10.34194/GEUSB-201943-02-04 e2019430204-02 reservoir modelling, and how studying the LLBH can help enhance reservoir modelling of fractured basement. We pre- sent some of our preliminary observations of LLBH fault- fracture networks and discuss how the exposed sediment- basement features and processes might aid industry and research in their top basement mapping activities. We propose that LLBH provides a particularly suitable analogue for in- dustry and research to analyse: (a) multiscale fracture system connectivity, (b) fluid migration and fluid-rock reaction pro- cesses, (c) input parameters for basement reservoir modelling and (d) top basement geomorphologies and processes. ‘Basement’ is here defined as any crystalline lithology and as- sociated regolith. For definitions of fracture, fracture corridor, fault, fault zone, joint, vein and aperture see Peacock et al. (2016). Liverpool Land Basement High LLBH is a Precambrian–Caledonian (Corfu & Hartz 2011) crystalline basement massif onshore central East Greenland (71oN, 22oW), located on the western North Atlantic mar- gin, between the offshore Liverpool Land Basin (LLB) and the onshore Jameson Land Basin (JLB; Figs 1, 2). It is mostly comprised of granites, monzodiorites, gneisses and schists, and is the result of multiple tectonic, metamorphic, magmat- ic, burial, sedimentation, uplift and erosion events (Corfu & Hartz 2011; Guarnieri et al. 2017). Glacial erosion has gener- ated a deeply incised outcrop 125 × 35 km, rising up to 1.2 km a.s.l. LLBH has almost no vegetation cover, so rock expo- sures continuously display 3D relationships between lithol- ogy, structure, weathering and basin sedimentation across a range of scales, from tens of kilometres, down to millimetres (Fig. 3). LLBH and neighbouring JLB have been explored for decades. Sedimentary copper showings discovered in Per- mian–Triassic strata by Nordisk Mineselskab and Avannaa Resources–Anglo American were drilled by the latter con- sortium in 2014 (Guarnieri et al. 2017). JLB hydrocarbon seeps attracted petroleum exploration by ARCO (Atlan- tic Richfield Company; Guarnieri et al. 2017) and most recently by Greenland Gas & Oil (Greenland Gas & Oil 2019). Much tectonic, lithology and petrology research has been conducted upon and offshore LLBH. However, to our knowledge, this review is the first to highlight the poten- tial of the LLBH exposure to visualise input parameters for Sea level 0 4 8 12 16 Plio-Pleistocene Neogene Paleogene Cretaceous Permian–Jurassic Oceanic crust Devonian – M. Permian Paleogene sills 25 km NW SE JLB LLBH LLB km Pre-Permian W E TWT 1000 2000 Viking Graben Haugaland High Luno Graben Augvald Graben Avaldnes High 3000 Edvard Grieg Discovery Well Johan Sverdrup Discovery WellRolvsnes Well (projected) Palaeozoic Early Cretaceous Basement Johan Sverdrup Field Late Cretaceous Edvard Greig Field Jurrasic/Triassic Paleocene OWCOWC 5 10 km2.50 Fig. 2. A: Schematic geoseismic section (depth) across Jameson Land Basin (JLB), Liverpool Land Basement High (LLBH) and Liverpool Land Basin (LLB) on the western North Atlantic margin (modified after Hamann, 2005). Fig. 2. B: Interpreted seismic section (in two-way time) across the Southern Utsira High basement oil fields, eastern North Atlantic margin. The position of the Rolvsnes petroleum discovery in fractured basement is indicated in B. See Fig. 1 for section locations. (Reproduced with permission from Lie et al. 2016). e2019430204-03 fractured basement modelling of petroleum, geothermal and mineral commodities. Fracture systems in crystalline basement reservoirs Natural fracture systems are crucial components of basement reservoir models. Fracture systems are ubiquitous in upper crustal rocks and include faults, joints, veins and fracture ap- ertures. They dominate the hydrological behaviour of rocks (e.g. Fig. 4 in Belaidi et al. 2018) – especially in lithologies with low matrix porosity where fluid flow is channelised through permeable fractures (Vidal et al. 2017). Fracture systems enable basement highs to transmit or trap petroleum – the Lancaster field, offshore UK (Belaidi et al. 2018; fig. 1) and the Utsira High, offshore Norway (Riber et al. 2015; Fig. 1) are two examples. Likewise, geothermal energy is often ex- tracted from ‘hot’ water in fractured basement (e.g. Vosgerau et al. 2016; Vidal et al. 2017). Mineral deposits that precipi- tated into basement fracture networks during hydrothermal mineralisation occur worldwide (Sheldon & Micklethwaite 2007; Walter et al. 2018). Therefore, modelling natural frac- ture systems is fundamental to predicting reservoir capacity, petroleum, groundwater and geothermal resources, and to estimate the amount of vein-hosted mineral resources. Reservoir modelling of fractured basement: data resolution challenges Fractured reservoirs are complex, multi-component entities. It is often difficult to characterise the interactions of all their components in the subsurface and to quantify how fluids might move through them. Therefore, 3D reservoir models are built to quantitatively display and integrate subsurface parameters (Shepherd 2009; Ringrose & Bentley 2015). Ap- plications include estimating trapped fluid volumes, simu- lating fluid flow and planning where to drill wells. When building a 3D model of a fractured basement reservoir, large-scale basement faults can be interpreted on 3D seismic data (Fig. 4), but most lithology and fault-fracture network properties, e.g. spacing, apertures, porosity, permeability and fluid saturation are below seismic resolution. Characterising sub-metre-scale lithologies and fractures is conducted at the wellbore (e.g. with borehole images, core plug and sonic data), but upscaling and interpolating a fracture system’s properties away from the wellbore would be model-driven and highly uncertain. Moreover, some reservoir modellers may not have actually studied extensive 3D fracture systems in the field. The LLBH is a particularly suitable location for fractured basement reservoir geoscientists, modellers and engineers to understand, constrain, extrapolate and interpolate fractured basement properties. 2018 LLBH reconnaissance: initial observa- tions Remote sensing and field observations made in 2018 docu- mented the suitability of the LLBH for characterising frac- ture networks and weathering features needed for a fractured basement reservoir model. First, a reconnaissance analysis was conducted using Landsat-8 OLI, Sentinel-2 and ASTER spaceborne data, which enabled rapid identification of regional-scale struc- tural lineaments. Fieldwork was then conducted to exam- ine the exposure quality of a range of finer-scale structures (Figs 5A, B, C, D), mostly in an area c.10 km east of Nerl- erit Inaat (Constable Pynt) Airport and supplemented with aerial observations around LLBH by helicopter. All LLBH Continuum of rock outcrop scales on the Liverpool Land Basement High Seismic Imaging Colour coding of fractured reservoir data types Horizontal resolution and range (m) Inter-well electro-magnetic logs Dynamic flow data Single well logs Core Limit of most outcrops Fluid, rock, & fracture Fluid Ve rt ica l r es ol ut io n an d ra ng e (m ) 0 1 10 100 1000 10 000 100 000 0 1 10 100 1000Fig. 3. Spatial scales of input data for fractured reservoir models. Geological outcrops are often limited to the scales indicated by the red dashed line. LLBH encompasses the full range of scales required to cover all fractured reservoir para- meters (purple dashed line). e2019430204-04 lithologies are pervasively fractured (Figs 5A–D). For exam- ple, Hurry Inlet granite outcrops host 100 m wide corridors of planar joints and chlorite-lined strike-slip fault systems, whilst the Janus Ø schist (Fig. 5B) has fractures that reach more than 200 m in height. Vertical variations in the spacing of fractures in the schist reveal their mechanical stratigraphy. LLBH is segmented by generally east–west-oriented gla- cial valleys and fjords, with some cliff outcrops more than 500 m high. These outcrops display fracture networks at a scale suitable for reservoir model cross-sections. Below seis- mic scale (Figs 5B, C, D), the rock exposures continue to display fracture network-scaling relationships (e.g. fracture length-height ratios and the number of short versus long frac- tures) that are vital to realistically populate a fractured base- ment reservoir model. The frequencies and widths of fault zones and fracture corridors can be observed in 3D (Figs 5A, B). The sparse regolith and vegetation enable systematic analysis of structures, chemical alteration and mineralisation progressively across the fault zones. Between the fault zones and fracture corridors, 10 to 100 m size blocks of basement ‘matrix’ are pervasively fractured from metre- to millimetre- scales regardless of lithology (Figs 5C, D). Some of the ubiq- uitous LLBH epidote-quartz-carbonate veins are only partly cemented (Fig. 5D). Such rugose and cement-bridged aper- tures could maintain effective porosity-permeability in crys- talline rocks at reservoir conditions. This shows that whilst some subsurface veins may act as fluid barriers, others could actually contribute to a reservoir’s fluid storage and drainage. The sub-metre joints and partly cemented veins also indicate that LLBH is an analogue for dual-porosity basement reser- voir types (i.e. both discrete and non-discrete fracture sets contribute to fluid flow; e.g. Belaidi et al. 2018). Characteris- ing LLBH veins can help visualise how to incorporate min- eralisation and dissolution history into basement reservoir matrix permeability models. A reservoir’s top basement bedrock and regolith zone may be able to store significant volumes of fluid or mineral resources (Holland 2011) and should be studied in detail. Subsurface seismic interpretations often involve mapping top basement, but this is frequently schematic due to lim- ited top basement resolution or limited knowledge of top basement characteristics. The well-exposed and incised top basement of LLBH (marked by the nonconformity between JLB sedimentary rock and underlying basement) enables detailed study of constituent geomorphologies, weathering facies, regolith types and porosity-permeability networks formed during arid peneplanation (Permian) and glacial (Quaternary) processes. Regolith types include talus slopes, proximal conglomerates, freeze-thaw rubble, proximal out- wash plains and kaolinitised peneplains. Top basement in the Kangerterajittap Ilinnera (Klitdal) area forms a noncon- formity contact between JLB Pingodal Formation basal con- glomerate and gneiss. Here, some of the orthogonal joints in the Pingodal Formation appear to be non-stratabound, i.e. continue into underlying gneisses, and could have connected basin and basement fluid systems. Conclusions Our 2018 reconnaissance suggests that LLBH is a particu- larly suitable location for petroleum, mineral and geothermal resource sectors to visualise connectivity of dual-porosity basement reservoir fracture networks and mineralisation features continuously across a range of scales. Studying the LLBH could help geoscientists, modellers and engineers to formulate procedures to upscale wellbore data and down- scale seismic data in their fractured basement reservoir mod- els. LLBH also provides drilling and reservoir engineers with visual insights into fractured basement heterogeneity. The LLBH top basement displays a range of palaeo-weathering y-axis y-axis x-axis x-axis z-axis z-axis Fig. 4. Fault planes interpreted from seismic data are just one input type for a fractured basement reservoir model. This example is from the Lancaster field (see Fig. 1. for location). The grid cells are 1 km3. The arrow points north, and the green face points to shallower depths. Modelling the intervening reservoir matrix can be facilitated by analysing appropriate analogue outcrops. (Reproduced with permission from Belaidi et al. 2018). e2019430204-05 profiles and glacial geomorphology features to aid any top basement seismic interpretation. The vein mineralisation and dissolution histories exposed on LLBH can help discern the effects of basement highs on basinal brine migration pro- cesses during basin- and basement-hosted base metal miner- alisation. The following projects are being considered for further study: • To collect and interpret photographs of valley/fjord cliffs to 3D-map the laterally continuous fracture networks, and create reservoir-scale virtual outcrops, using pho- togeological techniques (e.g. Sørensen and Dueholm 2018). • Organise a workshop on the LLBH in the field to fa- cilitate discussions between reservoir geoscientists, geo- modellers and reservoir engineers of fractured basement reservoir modelling and fracture systems. • Investigate the Permian-Triassic palaeoenvironments of the JLSB-LLBH nonconformity to understand top basement geomorphologies, evolution and reservoir properties. Acknowledgements We thank the Permian-Triassic of East and North-East Greenland project at GEUS for sponsorship; the GEUS logistics and field equipment team; staff at Nerlerit Inaat (Constable Pynt) Airport and the Air Greenland helicopter crews for their contributions to the 2018 fieldwork. We also thank Tim Needham (Needham Geoscience Limited) and Tom Wesby (First Quantum) for their valuable reviews of this manuscript, Jan Lie EW c. 200 m c. 15 m EW B D C c. 200 m Looking east 2 cm A A Fig. 5. Reconnaissance of the LLBH. A: Exposure of top basement morphology and 3D fracture network connectivity. B: Pervasive fractures > 200 m high on Janus Ø. C: Intense fracturing of basement matrix at the scale of one reservoir model grid cell (sub-kilometre scale). D: Partly-cemented vein aperture at core-plug scale (centimetre-scale). e2019430204-06 *Corresponding author: Graham Banks | E-mail: gb@geus.dk 1 Geological Survey of Denmark and Greenland (GEUS), Øster Voldgade 10, DK-1350, Copenhagen K, Denmark. 2 Department of Geological Sciences, Stanford University, Stanford, California 94305, USA. 3 Jægersborg Alle 55, 2920 Charlottenlund, Denmark. 4 Department of Earth Science, University of Bergen, Allégaten 41, 5007 Bergen, Norway. 5 INEOS Oil & Gas Denmark, Teknikerbyen 5, 2830 Virum, Denmark. (Lundin-Norway) for supplying Fig. 2B, Daniel Bonter and Robert Trice (Hurricane Energy) for supplying Fig. 4. References Belaidi, A., Bonter, D.A., Slightam, C. & Trice R.C. 2018: The Lancaster Field: progress in opening the UK’s fractured basement play. In: Bow- man, M. & Levell, B. (eds): Petroleum Geology of NW Europe: 50 Years of Learning – Proceedings of the 8th Petroleum Geology Conference, 385–398. Borg, G., Piestrzynski, A., Bachmann, G. H., Püttmann, W., Walther, S. & Fiedler, M. 2012: An overview of the European Kupferschiefer Deposits. In: Hedenquist, J.W., Harris, M. & Camus, F. (eds): Geology and Gen- esis of Major Copper Deposits and Districts of the World: A Tribute to Richard H. Sillitoe. Special Publications – Society of Economic Geolo- gists 16, 455–486. Busby, C. & Azor, A. (eds). 2012: Tectonics of Sedimentary Basins: Recent Advances, 647 pp. Chichester: Wiley & Sons. Corfu, F. & Hartz, E.H. 2011: U–Pb geochronology in Liverpool Land and Canning Land, East Greenland  — the complex record of a polyphase Caledonian orogeny. Canadian Journal of Earth Sciences 48, 473–494. https://doi.org/10.1139/e10-066 Greenland Gas & Oil A/S, 2019. Available online at: http://www.ggoplc. com/projects/jameson.html Guarnieri. P., Brethes, A. & Rasmussen, T. M. 2017: Geometry and kine- matics of the Triassic rift basin in Jameson Land (East Greenland). Tec- tonics 36, 602–614. https://doi.org/10.1002/2016tc004419 Hamann, N.E., Whittaker, R.C. & Stemmerik, L. 2005. Geological de- velopment of the Northeast Greenland Shelf. Geological Society, Lon- don, Petroleum Geology Conference Series 6, 887–902. https://doi. org/10.1144/0060887 Hitzman, M., Kirkham, R., Broughton, D., Thorson, J. & Selley, D. 2005: The sediment-hosted stratiform copper ore system. In: Hedenquist, J.W. et al. (eds): Economic Geology: One hundredth anniversary volume 1905–2005, 609–642. Littleton, Colorado: Society of Economic Geolo- gists. https://doi.org/10.5382/AV100.19 Holland, M. 2011: Hydrogeological characterisation of crystalline base- ment aquifers within the Limpopo Province, South Africa, PhD thesis, University of Pretoria, South Africa.  Hopper, J.R., Funck, T., Stoker, M., Árting, U., Péron-Pinvidic, G., Doorn- enbal, H. & Gaina, C. (eds). 2014: Tectonostratigraphic Atlas of the North-East Atlantic Region. Geological Survey of Denmark and Green- land (GEUS), Copenhagen, Denmark. Lie, J.E., Nilsen, E.H., Grandal, E., Grue, K. & Sørlie, R. 2016: A successful geophysical prediction of fractured porous basement reservoir - Rolvsnes oil discovery 2015, Utsira High. Extended abstract, 78th EAGE Confer- ence & Exhibition. Vienna, Austria, 30 May–2 June, 2016. https://doi. org/10.3997/2214-4609.201600593 Peacock, D.C.P., Nixon, C.W., Rotevatn, A., Sanderson, D.J. & Zuluaga, L.F. 2016: Glossary of fault and other fracture networks. Journal of Structural Geology 92, 12–29. https://doi.org/10.1016/j.jsg.2016.09.008 Ringrose, P. & Bentley, M. 2015: Reservoir Model Design – A practitioner’s guide. 62 pp. Dordrecht: Springer. https://doi.org/10.1007/978-94-007- 5497-3 Riber, L., Dypvik, H. & Sorlie, R. 2015: Altered basement rocks on the Ut- sira High and its surroundings, Norwegian North Sea. Norwegian Jour- nal of Geology 95, 57–89. https://doi.org/10.17850/njg95-1-04 Sheldon, H.A. & Micklethwaite, S. 2007: Damage and permeability around faults: Implications for mineralization Geology 35, 903–906. https:// doi.org/10.1130/g23860a.1 Shepherd, M. 2009: 3-D geocellular modelling. In: Shepherd, M (ed.): Oil field production geology. American Association of Petroleum Geologists Memoir 91, 175–188. Sørensen, E.V. & Dueholm, M. 2018: Analytical procedures for 3D map- ping at the Photogeological Laboratory of the Geological Survey of Den- mark and Greenland. Geological Survey of Denmark and Greenland Bulletin 41, 99–104. Trice, R. 2014: Basement exploration, West of Shetlands: progress in open- ing a new play on the UKCS. Geological Society (London), Special Pub- lications 397, 81–105. https://doi.org/10.1144/sp397.3 Vidal, J., Genter, A. & Chopin, F. 2017: Permeable fracture zones in the hard rocks of the geothermal reservoir at Rittershoffen, France. Journal of Geophysical Research: Solid Earth 122, 4864– 4887. https://doi. org/10.1002/2017jb014331  Vosgerau, H. et al. 2016: A WebGIS portal for exploration of deep geother- mal energy based on geological and geophysical data. Geological Survey of Denmark and Greenland Bulletin 35, 23–26. Walter, B.F., Gerdes, A., Kleinhanns, I.C., Dunkl, I., von Eynatten, H., Kreissl, S. & Markl, G. 2018: The connection between hydrothermal fluids, mineralisation, tectonics and magmatism in a continental rift set- ting: Fluorite Sm-Nd and hematite and carbonates U-Pb geochronology from the Rhinegraben in SW Germany. Geochimica et Cosmochimica Acta 240, 11–42. https://doi.org/10.1016/j.gca.2018.08.012 How to cite Banks, G., Bernstein, S., Salehi, S., Guarnieri, P., Bird, D., Hamb- lett, C., Peacock, D. & Foster, J. 2019: Liverpool Land Basement High, Greenland: visualising inputs for fractured crystalline base- ment reservoir models. Geological Survey of Denmark and Greenland Bulletin 43, e2019430204. https://doi.org/10.34194/GEUSB-201943-02-04 mailto:gb%40geus.dk?subject= https://doi.org/10.1139/e10-066 http://www.ggoplc.com/projects/jameson.html http://www.ggoplc.com/projects/jameson.html https://doi.org/10.1002/2016tc004419 https://doi.org/10.1144/0060887 https://doi.org/10.1144/0060887 https://doi.org/10.5382/AV100.19 https://doi.org/10.3997/2214-4609.201600593 https://doi.org/10.3997/2214-4609.201600593 https://www.sciencedirect.com/science/journal/01918141 https://www.sciencedirect.com/science/journal/01918141 https://doi.org/10.1016/j.jsg.2016.09.008 https://doi.org/10.1007/978-94-007-5497-3 https://doi.org/10.1007/978-94-007-5497-3 https://doi.org/10.17850/njg95-1-04 https://doi.org/10.1130/g23860a.1 https://doi.org/10.1130/g23860a.1 https://doi.org/10.1144/sp397.3 https://doi.org/10.1002/2017jb014331 https://doi.org/10.1002/2017jb014331 https://doi.org/10.1016/j.gca.2018.08.012 https://doi.org/10.34194/GEUSB-201943-02-04