hjic: A Pathfinder

This is a computer-generated pathfinder created against the Distant Reader study called hjic.

Each Distant Reader study carrel is composed of many individual items. Each item is bibliographically described with author, title, date, summary, and keyword values. Below is a list of the items' most signficant keywords as well as lists of the items themselves. Purpusing the content of this pathfinder provides the student, researcher, or scholar with one way to get their heads around the scope of the carrel. The keywords include:

Water; System; Concentration; Process; Time; Surface; Acid; Temperature; Data; Reaction; Gas; Page; Production; Energy; Control; Case; Samples; Oil; Rate; Properties; Phase; Parameters; Treatment; Results; Simulation; Flow; Analysis; Pressure; Algorithm; Membrane; Table; Solution; Method; Carbon; Waste; Voltage; State; Activity; Power; Values; Current; Enzyme; Corrosion; Extraction; Mass; Fermentation; Network; Design; Function; Effect; Industry; Size; Heat; Liquid; Separation; Adsorption; Test; Air; Hydrogen; Chemistry; Quality; Wastewater; Metal; Field; Column; Plant; Manufacturing; Cutting; Removal; Flux; Chem; Hungary; Controller; Speed; Min; Fuel; Tool; Frequency; Soil; Composites; Graph; Equations; Points; Batch; Compounds; Index; Composition; Position; Angle; Light; Software; Equilibrium; Viscosity; Torque; Starch; Food; Technologies; Signal; Technology; Ion; Fibre; Iso; Development; Recovery; Factors; Electrophoresis; Complexes; Images; Change; Bacteria; Parameter; Ebc; Scheduling; Students; Phosphorylation; Concentrates; Head; Workshop

Depending on how this pathfinder was created, many of the bibliographic sections will include elaborations on the meaning(s) of the given keywords. These elaborations were generated by feeding the items' summaries to a large langauge model and asking the model to address the question, "What is X?", where "X" is the keyword. The result will be a few sentences of elaboration. Be forewarned. The elaborations are often plausible, but they should not be take as truth. Instead, they should be taken as points for consideration.

Water

System

Concentration

Process

Time

Surface

Acid

Temperature

Data

Reaction

Gas

Page

Production

Energy

Control

Case

Samples

Oil

Rate

Properties

Phase

Parameters

Treatment

Results

Simulation

Flow

Analysis

Pressure

Algorithm

Membrane

Table

Solution

Method

Carbon

Waste

Voltage

State

Activity

Power

Values

Current

Enzyme

Corrosion

Extraction

Mass

Fermentation

Network

Design

Function

Effect

Industry

Size

Heat

Liquid

Separation

Adsorption

Test

Air

Hydrogen

Chemistry

Quality

Wastewater

Metal

Field

Column

Plant

Manufacturing

Cutting

Removal

Flux

Chem

Hungary

Controller

Speed

Min

Fuel

Tool

Frequency

Soil

Composites

Graph

Equations

  • TIME SERIES AND THE ALGEBRAIC MATRIX RICCATI EQUATION by Storey, C. (2002) - Keywords: autoregressive time series, Yule-Walker equations, algebraic matrix Riccati equations, total least squares Introduction Determination of the autoregressive parameters ai,i = O,l,···,n, (1) in the stochastic process (2) where (3) i=o is investigated. Two different sets of parameter values are given for each of two different suggested models: Modell Tent: y(t) -1.32y(t -1) + 0.63y(t- 2) = w(t) , Final: y(t) -1.42y(t Keywords: equations; final; numerical; series

Points

  • B-SPLINES CONTRA BÉZIERSPLINES by Herrmann, N. (2001) - A typical choice is to consider spline functions which are linear outside the interval xn+l+I) knot sequence N li B-Splines (t- x)~ +-function A =(X0 , ••• ,xn+l) given knots C1 - 1[a.b] (l-1)-times continuously differentiable functions IP 1 vector space of polynomials of degree less or equall S1(A) Q B1(x) do, ... ,dn Bt(x) xn(x) s(x) a/ Po, ... ,Pq l(x) vector space of spline functions infinite knot sequence B-Spline curve de Boor points Bernstein polynomials Bezier curve spline function coefficients in the de Boor algorithm interpolation points linear spline function difference quotients REFERENCES 1. COSTATINI, P., MORANDI, R.: Keywords: points; splines
  • Control Operation and Analysis of the Spur Gears Profile by Faluvegi, E.; Cristea, L. (2011) - Keywords: cylindrical gear, involute profile, profile error, graphical user interface. The theoretic profile of cylindrical gear can be described with an involute curve detected in the front section. Keywords: coordinate; errors; gear; gui; measuring; points; profile; theoretical

Batch

Compounds

  • Study on Analysis of Antibiotic Compounds from Enthomopathogenic Bacteria by Ft-Ir by Vozik, D.; Madarász, J.; Csanádi, Z.; Fodor, A.; Dublecz, K.; Bélafi-Bakó, K. (2012) - Figure 1: Antibiotic compounds purified with iPrOH from EMA Figure 2: Antibiotic compounds purified with MeOH from EMA Figure 3: Antibiotic compounds purified with iPrOH form EMC 85 All other side chain absorption overlap with the absorption of other side chains or of the polypeptide backbone and further experiments are needed to assign an absorption band to a specific side chain moiety. Keywords: amino; bacteria; cm-1; compounds; meoh; peptides; proteins

Index

  • Preparation and Characterization of ZnO and TiO2 Sol-Gel Thin Films Deposited by Dip Coating by Baranyai, R.; Detrich, Á.; Volentiru, E.; Hórvölgyi, Z. (2009) - 136 REFERENCES 1 FERNANDES D. M., SILVA R., WINKLER HECHENLEITNER A. A., RADOVANOVIC E., CUSTÓDIO MELO M. A., GÓMEZ PINEDA E. A.: Synthesis and characterization of ZnO, CuO and a mixed Zn and Cu oxide, Materials Chemistry and Physics 115 (2009) 1, 110 2 IRIMPAN L., KRISHNAN B., NAMPOORI V. P. N., RADHAKRISHNAN P.: Nonlinear optical characteristics of nanocomposites of ZnO–TiO2–SiO2, Optical Materials 31 (2008) 2, 361 3 KURZ A., AEGERTER M. A.: Novel transparent conducting sol–gel oxide coatings, Thin Solid Films 516 (2008) 14, 4513 4 PÁL E., SEBŐK D., HORNOK V., DÉKÁNY I.: Structural, optical, and adsorption properties of ZnO2/poly(acrylic acid) hybrid thin porous films prepared by ionic strength controlled layer-by-layer method, Journal of Colloid and Interface Science 332 (2009) 1, 173 5 KÖNENKAMP R., WORD R. C., GODINEZ M.: Ultraviolet electroluminescence from ZnO/polymer heterojunction light-emitting diodes, Nano Letters 5 (2005) 10, 2005 6 GUO H., ZHOU J., LIN Z.: ZnO nanorod light- emitting diodes fabricated by electrochemical approaches, Electrochemistry Communications 10 (2008) 1, 146 7 MARTÍNEZ M. A., HERRERO J., GUITÉRREZ: Deposition of transparent and conductive Al- M. T. doped ZnO thin films for photovoltaic solar cell, Solar Energy Materials and Solar Cells 45 (1997) 1, 75 8 NÉMETH Á., MAJOR CS., FRIED M., LÁBADI Z., BÁRSONY I.: Spectroscopic ellipsometry study of transparent conductive ZnO layers for CIGS solar cell applications, Thin Solid Films 516 (2008) 20, 7016 9 KAY A., GRÄTZEL M.: Low cost photovoltaic modules based on dye sensitized nanocrystalline titanium dioxide and carbon powder, Solar Energy Materials and Solar Cells 44 (1996) 1, 99 10 GRÄTZEL M.: 34 ARMELAO L., FABRIZIO M., GIALANELLA S., ZORDAN F.: Sol-gel synthesis and characterisation of ZnO-based nanosystems, Thin Solid Films 394 (2001) 12-13, 90 35 RATANA T., AMORNPITOKSUK P., RATANA T., SUWANBOON S.: The wide band gap of highly oriented nanocrystalline Al doped ZnO thin films from sol-gel dip coating, Journal of Alloys and Compounds 470 (2009) 1-2, 408 36 DUTTA M., MRIDHA S., BASAK D.: Effect of sol concentration on the properties of ZnO thin films prepared by sol–gel technique, Applied Surface Science 254 (2008) 9, 2743 37 TRAPALIS C., TODOROVA N., ANASTESCU M., ANASTESCU C., STOICA M., GARTNER M., ZAHARESCU M., STOICA T.: Atomic force microscopy study of TiO2 sol-gel films thermally treated under NH3 atmosphere, Thin Solid Films 517 (2009) 23, 6243 38 DEÁK A., HILD E., KOVÁCS A. L., HÓRVÖLGYI Z.: Keywords: films; index; layers; sar; sol; thickness; thin; tio2; withdrawal; zno

Composition

  • Enantioselective Catalytic Three-Component Synthesis of Optically Active Propargyl Amino Ethers by Talybov, Gulahmad Mirahmad (2025) - Chem., 2021, 86(24), 17955–17964, DOI: 10.1021/acs.joc.1c02296 N H CH3 HO CH3 NH R 1 O R R 2 n Figure 2: Scheme of how the protons of pseudoephedrine interact with the hydrogen bonds of propargyl amino ethers Table 1: Enantioselective reactions of benzaldehyde as well as its methoxy-substituted derivatives and propargyl ethers with aniline in the presence of a chiral catalyst – pseudoephedrine Entry Time (h) Yield (%) de (%) [11], the synthesis of novel compounds No. 1-7 is the first time that propargyl ethers have been used. Keywords: composition; doi; ethers; propargyl

Position

  • The Application of Probability Theory for Drilling by Monostori, R.; Dudás, I. (2010) - Drilling Through hole drilling is the procedure when we make a hole into a standing or rotating brief workpiece. The definition of the position of holes It is possible to determine the position of the holes in many ways. Keywords: axis; boring; drill; figure; hole; position; workpiece

Angle

  • Modeling and Calculation of the Global Solar Irradiance on Slopes by Bálint, Roland; Fodor, Attila; Szalkai, István; Szalkai, Zsófia; Magyar, Attila (2019) - Keywords: solar irradiance, modeling, solar geometry, inclined surface 1. A general model of the angle of incidence of solar irradiance with regard to the azimuth is derived in Ref. Keywords: angle; earth; irradiance; sun

Light

  • Simulation of color afterimages: An approach to computing virtual color perception by Garai, Lőrinc; Horváth, András (2018) - Hungarian Journal of Industry and Chemistry BIOPHYSICAL MODEL OF COLOR AFTERIMAGES 21 Table 3: Comparison of virtual color perception intensity in model situations and in validation test results Ranking in model Ranking category Ranking in validation test results ID Rank ID Median of ranking Corre- lation R → G 1 High B → G 1.00 No G2B2 → R 2 B2R2 → G 2.00 Yes G1B3 → R 3 R → G 3.00 Yes B2R2 → G 4 B → R2G2 4.00 No R → G2B2 5 Medium R → G2B2 4.00 Yes R2G2 → B 6 Low G1B3 → R 4.50 No G → B2R2 7 G2B2 → R 5.00 No B → G 8 G → B2R2 5.00 Yes B → R2G2 9 R2G2 → B 7.00 Yes Matching percentage between model and validation test results: 56% Table 4: Comparison of virtual color perception time pe- riod in model situations and in validation test results Ranking in model Ranking category Ranking in validation test results ID Rank ID Median of ranking Corre- lation R → G2B2 1 High B → G 1.00 No R → G 2 G1B3 → R 2.00 No G → B2R2 3 B → R2G2 3.00 No B2R2 → G 4 R → G2B2 4.00 Yes R2G2 → B 5 Medium G2B2 → R 4.00 No G2B2 → R 6 Low G → B2R2 4.50 No B → R2G2 7 B2R2 → G 5.00 No G1B3 → R 8 R → G 5.00 No B → G 9 R2G2 → B 7.00 No Matching percentage between model and validation test results: 11% • Second, the eyes of the subject were fixed on a circle at the center of the subsequent colored image (Fig. 4) for 30 seconds. A subordinate of afterimages defined in our research is virtual color perception, that is in our interpretation an unusual and intense temporary color perception provoked by a rapid change in the color of the incident light. Keywords: color; incident; light; model; perception; photopigment

Software

  • Study on the Photo-Based 3d Scanning Process by Kristály, Álmos; Ficzere, Péter (2022) - Figure 7: Generated models of the automobile and the motorcycle. be seen on the motorcycle, along with the inaccuracy of the tires, especially on areas close to the ground. CNC codes can be generated directly from digital 3D geometries (CAD models, Fig. Keywords: dimensions; models; photos; software

Equilibrium

Viscosity

Torque

  • Comparative Analysis of Machine Model-Based Sensorless DTC of Two Parallel Connected Five-Phase Induction Machines by Benzaoui, Khaled Mohammed Said; Guedida, Sifelislam; Kouache, Ahmed Zouhir; Benyoussef, Elakhdar (2025) - − − −   = + +   =  V (21), ^ ^ 0 0 T s j s j s j s j T s j s jm s j s j x i i e The reference model The voltage model of the machine is utilized given the independent nature of the mechanical speed of the rotor as follows: ( )       rj rj sj sj sj j sj sjj j j mj Ld V R Keywords: rj j; s j; sj j; torque;  

Starch

  • The Production and Investigation of Starch Based Slow Released Encapsulating Agents by Meiczinger, M.; Marton, Gy. (2010) - In this paper we present our experiences about dissolution of the zinc and copper in different pH. Keywords: slow release, encapsulating agent, starch derivatives Introduction For many years our research group deals with the improvement of starch derivatives, which are able to slow release of micro components as fertilizers. Through the modification of starch, we replaced some of its OH groups in the anhydroglucose monomer unit by the ionic groups of phosphate with chemical reaction. Keywords: day; dissolution; starch

Food

  • Analysis and Identification of Polyphenolic Compounds in Green Foods Using a Combination of HPLC-ESI-IT-TOF-MS/MS by Škvára, Pavel; Kezmanová, Júlia; Mišľanová, Csilla; Vojs Staňová, Andrea (2018) - Chemistry and Biochemistry of Dietary Polyphenols, Nutrients, 2010 2(12), 1231–1246 DOI: 10.3390/nu2121231 [6] Orčić, D.; Francišković, M.; Bekvalac, K.; Svirčev, E.; Beara, I.; Lesjak, M.; Mimica-Dukić, N.: Quan- titative determination of plant phenolics in Urtica dioica extracts by high-performance liquid chro- matography coupled with tandem mass spectromet- ric detection, Food Chemistry, 2014 143, 48–53 DOI: 10.1016/j.foodchem.2013.07.097 [7] Baskaran, R.; Pullencheri, D.; Somasundaram, R.: Characterization of free, esterified and bound phenolics in custard apple (Annona squamosa L) fruit pulp by UPLC-ESI-MS/MS, Food Re- search International, 2016 82, 121–127 DOI: 10.1016/j.foodres.2016.02.001 [8] Comandini, P.; Lerma-García, M. J.; Simó-Alfonso, E. F.; Toschi, T. G.: Tannin analysis of chestnut bark samples (Castanea sativa Mill.) by HPLC- DAD–MS, Food Chemistry, 2014 157, 290–295 DOI: 10.1016/j.foodchem.2014.02.003 [9] Ma, Y.; Kosińska-Cagnazzo, A.; Kerr, W. L.; Amarowicz, R.; Swanson, R. B.; Pegg, R. B.: Separation and characterization of phenolic com- pounds from dry-blanched peanut skins by liq- uid chromatography–electrospray ionization mass spectrometry, J. Chromatography A, 2014 1356, 64–81 DOI: 10.1016/j.chroma.2014.06.027 [10] Jiang, H.; Timmermann, B. N.; Gang, D. R.: Char- acterization and identification of diarylheptanoids in ginger (Zingiber officinale Rosc.) using high- performance liquid chromatography/electrospray ionization mass spectrometry, Rapid Communica- tions in Mass Spectrometry, 2007 21(4), 509–518 DOI: 10.1002/rcm.2858 [1] Gil, E. S.; Couto, R. O.: Flavonoid electrochem- istry: a review on the electroanalytical applications, Revista Brasileira de Farmacognosia, 2013 23(3), 542–558 DOI: 10.1590/s0102-695x2013005000031 [2] Boros, B.; Jakabová, S.; Dörnyei, Á.; Horváth, G.; Pluhár, Z.; Kilár, F.; Felinger, A.: Deter- mination of polyphenolic compounds by liquid chromatography–mass spectrometry in Thymus species, J. Chromatography A, 2010 1217(51), 7972–7980 DOI: 10.1016/j.chroma.2010.07.042 [3] Ginjom, I.; D’Arcy, B.; Caffin, N.; Gidley, M.: Phe- nolic compound profiles in selected Queensland red wines at all stages of the wine-making pro- cess, Food Chemistry, 2011 125(3), 823–834 DOI: 10.1016/j.foodchem.2010.08.062 Keywords: doi; food

Technologies

  • Comparative Analysis of Burrs in UD-CFRP Composites Using Advanced Hole Machining Technologies by Helle, Anna Nikoletta; Pereszlai, Csongor; Gödri, András; Geier, Norbert (2022) - The current experimental study focuses on the analysis of burrs in- duced by advanced hole machining technologies (helical milling, tilted helical milling and wobble milling) and comparison with a conventional one (conventional drilling). The length of burrs was the longest in the case of holes machined by helical milling, followed by tilted helical milling. Keywords: burrs; drilling; hole; machining; milling; technologies

Signal

  • Study of Composite Pipelines Damaged by Corrosion: Control by Non-Destructive Testing by Lecheb, Samir; Daoui, Abdelhakim; Brihmat, Chahira; Mechakra, Hamza; Chellil, Ahmed; Safi, Brahim; Kebir, Hocine (2023) - Experimental investigation of reflection in guided wave-based inspection for the characterization of pipeline defects, NDT E Int., 2010, 43(4), 365–374, DOI: 10.1016/j.ndteint.2010.01.002 The most common forms of pipeline defects are shown in Figures 1a-e. Corrosion is the most frequent initial cause of damage in hydrocarbon pipelines Keywords: crack; defects; doi; figure; inspection; ndt; pipeline; signal; testing; waves

Technology

  • The Industrial Specialisation of Science and Technology Parks Through the Example of Zalazone Park by Csordás, Andrea; Háry, András; Tóth, Csilla (2025) - Based on these perspectives, ZalaZONE Park is placed in the activity-based classification system of innovation ecosystems, the analysis of which provides an opportunity for other science parks and areas of innovation (AOIs) to carry out a self-assessment according to the outlined framework, thereby outlining new strategic directions. Following the theoretical overview, the research introduced the activity-based classification method of innovation ecosystems, which foresees the definition of the sectoral character of ZalaZONE Park, the pillars of which are NACE codes, the sectoral focus generated from them and the technological focus. Keywords: actors; classification; ecosystems; figure; focus; innovation; park; research; science; technology; zalazone

Ion

Fibre

Iso

  • Complementary Manipulator Tool Development for Safe Cobot-Assisted Hydroponics by Paniti, Imre; Nacsa, János; Szűr, Dávid; Rácz, Sándor; Tóth, József (2022) - Conclusion Hydroponics is a subset of hydroculture, which is an environmentally friendly technology for growing plants in the absence of soil by using mineral nutrient solu- tions dissolved in water. Zone 1: Primary process area • Zone 2: Secondary process area • Zone 3: Surrounding equipment Figure 3: Plant roots in the Hydro pot. Keywords: clip; cobot; directive; fig; hydroponic; iso; safety

Development

  • Relationship between Input Channel Excitation Time and Profinet IO Refresh Time by Kollár, K. (2011) - Keywords: local economic development instrument, local economic development strategy, human resource development, direct service development, Economic Development Scheme of Vienna Introduction As we examine the international and national literature we can see that the regulatory and organizational system of the countries are quite differentiated and diverse but in the case of economic development tools used by local actors the situation isn't the same, in fact they are very similar. The process of local economic development is extremely complex. Keywords: business; city; development; enterprises; improvement; instruments; support; tax; tools; vienna

Recovery

Factors

  • Thoughts about the Clear Energy by Farkas, A.; Faragó, P. (2011) - Keywords: association, attitudes, energy sources, knowledge The aim of the survey If we want every layer of society to cooperate for success we need society to believe in alternative energy sources and acquire the basic knowledge related to it. In this research we introduce how university students look at alternative energy sources. Keywords: attitude; energy sources; factors; findings; interviewees; knowledge; research; respondents; students; university

Electrophoresis

  • Determination of Homocysteine in Urine and Saliva by Microchip Electrophoresis by Troška, Peter; Mandžáková, Anna; Hradski, Jasna; Ševčík, Juraj; Masár, Marián (2018) - Anal., 1997 15(9–10), 1435–1441 DOI: 10.1016/S0731- 7085(96)02051-1 [15] Vecchione, G.; Margaglione, M.; Grandone, E.; Colaizzo, D.; Cappucci, G.; Fermo, I.; D’Angelo, A.; Di Minno, G.: Determining sulfur-containing amino acids by capillary electrophoresis: A fast novel method for total homocyst(e)ine human plasma, Electrophoresis, 1999 20(3), 569–574 DOI: 10.1002/(SICI)1522-2683(19990301)20:3<569::AID- ELPS569>3.0.CO;2-S [16] Liang, Q.; Chen, H.; Li, F.; Du, X.: Simultane- ous sensitive MEKC-LIF determination of homo- cysteine, homoarginine, and six arginine metabolic derivatives in fluids from type 2 diabetics with pep- tic ulcer bleeding, Chromatographia, 2015 78(15– 16), 1049–1056 DOI: 10.1007/s10337-015-2919-6 [17] Ševčíková, P.; Glatz, Z.; Tomandl, J.: Determina- tion of homocysteine in human plasma by micel- lar electrokinetic chromatography and in-capillary detection reaction with 2,2’- dipyridyl disulfide, J. Chromatogr. A., 2003 990(1–2), 197–204 DOI: 10.1016/S0021-9673(03)00048-7 [18] Chassaing, C.; Gonin, J.; Wilcox, C.S.; Wainer, I.W.: Determination of reduced and oxidized ho- mocysteine and related thiols in plasma by thiol- specific pre-column derivatization and capillary electrophoresis with laser-induced fluorescence de- tection, J. Chromatogr. Chem., 2011 66(3), 317–321 DOI: 10.1134/S1061934811030075 [8] Melnikov, I.O.; Nazimov, I.V.; Stukacheva, E.A.; Glubokov, Y.: Determination of homocysteine and other low-molecular-weight amino thiols in blood plasma, J. Anal. Keywords: cze; doi; electrophoresis; homocysteine; itp

Complexes

  • Separation of the Enantiomers of p-Chiral Cyclic Phosphorus Compounds by Ujj, V.; Szuhánszki, T.; Schindler, J.; Czugler, M.; Fogassy, E.; Keglevich, Gy. (2008) - In the next part of the work, resolution processes of 1a with (–)-3 were further tested in various other solvents or solvent mixtures, but no crystals were obtained. The antipodes of 1-aryl-, 1-alkyl- and 1-alkoxy-3-methyl-3-phospholene 1-oxides 1a-h were separated in good yields and in high enantiomeric excesses (up to >99% ee) by resolution via formation of diastereomeric complexes with (–)-(4R,5R)-4,5-bis(diphenylhydroxymethyl)-2,2-dimethyldioxolane (–)-2 (TADDOL) or (–)-(2R,3R)-α,α,α’,α’-tetraphenyl- 1,4-dioxaspiro[4.5]decan-2,3-dimethanol (–)-3. Keywords: complex; complexes; oxides; phospholene; resolution

Images

  • Improving the efficiency of neural networks with virtual training data by Hollósi, János; Krecht, Rudolf; Markó, Norbert; Ballagi, Áron (2020) - Experience has shown that the efficiency of road surface detection is improved by using three times as many virtual images, while for protective barrier de- tection it is sufficient to only use virtual images. For road surface segmentation, five different datasets are created from the Cityscapes Dataset and our collec- tion of virtual images. Keywords: computer; dataset; images; networks; racing; segmentation; training

Change

  • The Role of Raising Awareness in Ensuring the Resilience of Cities by Rjiba Iskander, Ben; Sebestyén, Viktor; Tóth-Nagy, Georgina (2024) - Climate change is an imminent threat to urban development and its adverse effects can only be mitigated with the collective efforts of city dwellers. By evaluating the level of awareness and relating it to the greenhouse gas emissions emitted by three selected countries - namely Germany, Brazil and Kenya - this study highlights the need for awareness-raising campaigns and community-engagement initiatives centered around the risks of climate change and its potential impact on cities. Keywords: awareness; brazil; change; cities; climate; doi; education; emissions; germany; kenya

Bacteria

  • Combination of Chemical and Biological Methods for Effective Plant Protection by Vozik, Dávid; Bélafi-Bakó, Katalin (2020) - 2012, 40(2), 83–86 https://mk.uni- pannon.hu/hjic/index.php/hjic/article/download/346/316 [13] Böszörményi, E.; Érsek, T.; Fodor, A.; Földes, L. Sz.; Hevesi, M.; Hogan, J. S.; Katona, Z.; Klein, M. G.; Kormány, A.; Pekár, Sz.; Szentirmai, A.; Sztar- icskai, F.; Taylor, R. A. J.: Isolation and activity of 48(2) pp. Entomopathogenic bacteria live in symbiosis with en- tomopathogenic nematodes [3,4]. Keywords: bacteria; nematodes; xenorhabdus

Parameter

  • Modeling and Parameter Sensitivity Analysis of a Synchronous Motor by Neukirchner, L.; Fodor, A.; Magyar, A. (2011) - Motor parameters The parameters are described only for phase a since the machine is assumed to have symmetrical tri-phase stator windings system. Figure 4: Model responses for the +90% changing of parameter D Figure 5: Model responses for the +90% changing of parameter r stator resistance Not sensitive: Keywords: model; parameter; ⎢ ⎢; ⎢ ⎣; ⎣ ⎡; ⎥ ⎥; ⎥ ⎦

Ebc

Scheduling

  • Using Graphical Processing Units in Scheduling Problems by Mihály, K.; Hornyák, O. (2011) - Our goal is to use this specialized graphical platform for solving scheduling problems. This paper is an initial research of the existing platforms and solutions in general and describes the existing solutions in fact of scheduling problems. Keywords: cuda; gpu; hardware; memory; parallel; problems; processing; scheduling

Students

  • Editorial Preface by , (2014) - Even those students who do not continue their life in the academia tend to remember their time spend on TDK activities as useful and memorable. editorial EDITORIAL PREFACE The Editorial Board of HJIC dedicates this Issue to the National Scientific Students’ Associations (Tudományos Diákkör, in Hungarian, abbreviated as TDK) that is a real Hungaricum with a 62 years old tradition. Keywords: students

Phosphorylation

  • Semiquantitative Assessment of Dishevelled-3 Phosphorylation Status by Mass Spectrometry by Hanáková, Kateřina; Potěšil, David; Bernatík, Ondřej; Cervenka, Igor; Rádsetoulal, Matěj; Bryja, Vítězslav; Zdráhal, Zbyněk (2018) - 4 HANÁKOVÁ, POTĚŠIL, BERNATÍK, ČERVENKA, RÁDSETOULAL, BRYJA, AND ZDRÁHAL Figure 1: Comparison of phosphorylation sites of hDvl3 induced by CK1ε and NEK2. Phosphorylation sites identified only by NEK2 are indicated by red background color. analyzed by liquid chromatography coupled with mass spectrometry (LC-MS/MS) for protein identification (ID run). Keywords: ck1ε; dvl3; nek2; phosphorylation; sites

Concentrates

  • Properties of Polyamide 6 Fibres Modified by Silicate Nanoparticles by Vass, I.; Krištofiè, M.; Ryba, J. (2008) - Fibres modified by concentrate C have the best tensile strength in comparison with other modified fibres, particularly when the amount of concentrate in fibres is lower, i.e. 5 and 10 wt.% and at the drawing ratio 3.5. [NH(CH2)5CO]m - OH + (2n-1) H2O NH3 CH2 CH2 - The second part of contribution deals with the preparation of polyamide 6 (PA 6) fibres non-modified and modified by concentrates and determination of some properties (i.e. mechanical, sorptive, barrier and thermal properties) of modified fibres, too. Keywords: concentrates; fibres

Head

  • Finite Element Method Analysis of Hip-Joint Prosthesis by Monostori, R.; Dudás, I. (2011) - Metal parts (for example, the stem and the sphere head) of hip prostheses are made of either stainless steel or another metal, for example, titanium. The companion piece (for example socket) is made of polythene [1]. Keywords: figure; head; hip; joint; prosthesis; socket

Workshop

  • Editorial Preface to the Special Issue Dedicated to the Workshop Self-Driving Vehicles by Szalai, István (2020) - 1–1 (2020) hjic.mk.uni-pannon.hu DOI: 10.33927/hjic-2020-01 EDITORIAL PREFACE TO THE SPECIAL ISSUE DEDICATED TO THE WORKSHOP “SELF-DRIVING VEHICLES ISTVÁN SZALAI1 1Institute of Mechatronics Engineering and Research, University of Pannonia, Gasparich Márk utca 18/A, Zalaegerszeg H-8900, HUNGARY István Szalai Professional Leader ”Research of autonomous vehicle systems related to the autonomous test track in Za- laegerszeg“ (EFOP-3.6.2-16-2017-00002) https://doi.org/10.33927/hjic-2020-01 Keywords: workshop

Epilogue

For more detail, about this study carrel, see the computed home page. For more detail about study carrels in general, see the read me file.

Created: 2025-12-26