Microsoft Word - 145-156 https://doi.org/10.30526/31.1.1861 Chemistry | 145 2018) عام 1العدد ( 13مجلة إبن الهيثم للعلوم الصرفة والتطبيقية المجلد Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Swelling Behavior and Drug Release of Interpenetrating Network Composed of PVA and Chitosan Fathel S. Matty Zainab M. MohiALDeen Dept. of Chemistry/College of Education for Pure Science (Ibn-AL Haitham)/University of Baghdad zainabmohy.zm@gmail.com Received in:5/November/2017, Accepted in:26/November/2017 Abstract PVA and chitosan biodegradable, non-toxic, biocompatible polymers convenient for use in drug release. In this study polyvinyl alcohol (PVA) and chitosan (CS) hydrogels crosslinked with glutaraldehyde (GA) with different ratio morphology and structure characterization interpenetrating polymer network (IPN). They were investigated by Fourier transmission infrared spectroscopy (FTIR), scanning electron microscope (SEM), UV-Visible spectrophotometer, swelling of hydrogel and drug release were studied by changing crosslinking ratio and PH. Keywords: swelling, poly vinyl alcohol, chitosan, interpenetrating network, hydrogels, mebeverine hydrochloride. https://doi.org/10.30526/31.1.1861 Chemistry | 146 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Introduction Hydrogel is a hydrophilic polymer network that can swell and also retain large amounts of water with its porous structure in the result of this, the area of hydrogel research has expanded in the last years, so they performed well for different biomedical applications [1]. Recent advances application of hydrogels intended to achieve the fabrication of artificial organs, in specific drugs delivery and in a precise way to make wear contact lenses [2]. Hydrogels become swollen because they have the ability to absorb water, about 10-20 times of its specific weight [3]. The presence of hydrophilic groups such as (–COOH, -OH, - CONH2, -CONH, -SO3H) …etc. in polymers hydrogel structure gives hydrogels affinity to absorb large amount of water [4]. The space inside the hydrogels network that is available to accommodate water can be made use to determine the capacity of hydrogel swelling [5]. The water that polymer hydrogels absorbed is dependent on numerous factors like network parameters, hydrogels structure (porous or poreless), nature of solution, and drying techniques [6]. Chemical crosslinking is the best method to generate remaining unchanged hydrogel networks by synthesizing covalent bonding between different polymer chains [7]. Hydrogels based on chitosan and polyvinyl alcohol have many pharmaceutical and biomedical applications in drug delivery system. Many efforts and large studies were made to synthesize the CS/PVA hydrogels and their controlled drug delivery system was extensively studied by research workers [8]. In this study, hydrogel films were prepared by crosslinking of PVA\Chitosan blended by Glutaraldehyde with varying amounts. The FTIR, SEM, Swelling and Mebeverine hydrochloride as drug delivery properties of these films were investigated. Experimental Materials PVAsamples was purchased from Aldrich Co. (with 98%, M.wt=7200. Chitosan from HIMEDIA Purity 99% Mn =5000. Glutaraldehyde from CDH purity 99%, Hydrochloric acid from CDH Purity 35-38%, and Sodium acetate from CDH Purity 99%. Synthesis of IPN Chitosan\PVA Hyrdogel with GA The hydrogel films were prepared by solvent casting method, the formation of chitosan-PVA interpenetrating pH-sensitive hydrogel is due to the reaction between amino groups of chitosan, the PVA polymer and aldehyde groups of the glutaraldehyde as a crosslinker. Different weights of PVA shown in tables (1.1) were dissolved in hot ionized water at (80 °C). This solution was mixed in a (50 ml) beaker at room temperature, with (2% glacial acetic acid) and five different percentages of glutaraldehyde (see table (1.1)) were incorporated as crosslinking material. The reaction mixture was stirred magnetically for 30 mints, and then the cross linked polymer was formed. The reaction mixture was transferred into glass rectangular container that used for casting a IPN polymer shape with dimension 17 ×8 × 0.5 cm3 height made, left at room temperature for 3 days, for dryness, and then a thin film was formed. This was dried at 40 °C for 3 h by using thermal oven [9]. Drug (MVH) release in the IPN Hydrogel Different weights of PVA as shown in tables (1.2) were dissolved in hot ionized water at (80 °C), this solution was mixed in (50 ml) beaker after cooling to room temperature, chitosan with (2% glacial acetic acid), and add (0.14 wt\wt%) of (MVH) as drug five different https://doi.org/10.30526/31.1.1861 Chemistry | 147 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 percentages of glutaraldehyde like the tables (1) and (2) were incorporated as crosslinking material. The reaction mixture was stirred magnetically for 30 mints, and then the cross linked polymer was formed. The reaction mixture was transferred into glass rectangular container that used for casting a IPN polymer shape with dimension 17 ×8 × 0.5 cm3 height made, left at room temperature for 3 days, for dryness, and then a thin film was formed. This was dried at 40 °C for 3 h by using thermal oven, then left in water bath (37°C) and calculate the drug release in UV-Visible spectrophotometer each 10 min [9]. Table (1) experience 1 Table (2) experience 2 Swelling The swelling ratio determined (Rs) was determined by dried hydrogel pieces, by treating the hydrogel 0.1 g in 100 ml of a range of pH (1.2, 4.7,6.8) and was permitted to soak for 60 min at 37 °C. The hydrogel samples were collected by filtration after 10 min. The (Rs) is calculated from equation (1): % ……….(1) Ws=The weight of swollen IPN polymer. Wd=The weight of dry IPN polymer. Calibration Curve of mebeverine hydrochloride UV-Vis spectroscopy of mebeverine hydrochloride was obtained using 1 cm width quartz curette. The λ max that related to the maximum absorbance of mebeverine hydrochloride was observed at 221nm [10]. In order to estimate the drug concentration during the drug release studies calibration curve for mebeverine hydrochloride was construed from the absorbance data. Results and Discussion In our study, IPN hydrogels was synthesized which consisted of PVA, chitosan, glutaraldehyde as crosslinker as shown in figures (1) and (2) below. The reactions between amino groups of chitosan, the PVA polymer and the aldehyde groups of glutaraldehyde as crosslinker [11,12], with different amounts. The FTIR, SEM, Swelling and Mebeverine hydrochloride as drug delivery properties of these films were characterized. MVH (wt\wt) GA (V\V) PVA (wt\wt) CS (wt\wt) No. ofsample 0.14% 0.22% 0.14% 1.84% 1. 0.14% 0.44% 0.14% 1.84% 2. 0.14% 0.66% 0.14% 1.84% 3. 0.14% 0.88% 0.14% 1.84% 4. 0.14% 1.1% 0.14% 1.84% 5. GA (v\v) PVA (wt\wt) CS (wt\wt) No. of sample 0.22% 0.14% 1.84% 1. 0.44% 0.14% 1.84% 2. 0.66% 0.14% 1.84% 3. 0.88% 0.14% 1.84% 4. 1.1% 0.14% 1.84% 5. https://doi.org/10.30526/31.1.1861 Chemistry | 148 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Figure (1): Crosslinking reaction between PVA and glutaraldehyde. Figure (2): Crosslinking reaction between chitosan and glutaraldehyde. Characterization of PVA and chitosan IPN by FTIR Figures (3) and (4) and (5) show the FITR spectra of chitosan, PVA, chitosan-PVA IPN, the spectrum of pure chitosan figure (3) shows a strong absorption band in the range (3410-3117) cm-¹ correspond to combined peaks of OH, intermolecular hydrogen bonding and N-H stretching band. The (C-H) stretching vibration of the polymer beak bone in manifested through strong peak of 2920 – 2878 cm-¹ [13]. The bands at 1639 cm-¹ and 1601 cm-¹ were due to c=o stretching of secondary band caused by partial de acetylation of chitin and N-H bending of the primary amino group (NH2) respectively [14]. Absorption band at 1096 cm-¹ was assigned to the stretching band of C-O-C Bridge. FTIR spectrum of pure PVA sample figure (4) shows the (C-H) board alkyl baud in the range (2943-2855 cm-1), -OH stretching (3383 – 3422 cm-1) "intermolecular and intramalecular hydrogen bounding" due to high hydrophilic forces occur among PVA chains the baud at (1096 cm-1) was assigned to the (C-O) stretching bound. This bound has been used an assessment tool of PVA structure because it in a semi – crystalline synthetic may form some domains depending on several process parameters [11]. FTIR spectrum of PVA\chitosan (IPN) figure (5) shows a strong band at 1095.57 cm1 of (C- O-C) group, due to the crosslinking of PVA with glutaraldehyde. Chemical crosslinking of chitosan with glutaraldehyde can be caused by the Schiff base formation as shown by the 1616 cm-1 band associated with the C=N group [15]. https://doi.org/10.30526/31.1.1861 Chemistry | 149 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Figure (3): FTIR spectrum of pure chitosan. Figure (4): FTIR spectrum of pure PVA. https://doi.org/10.30526/31.1.1861 Chemistry | 150 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Figure (5): FTIR spectrum of chitosan – PVA IPN Crosslinking ratio influence on the swelling IPN hydrogel Crosslinking of hydrogel polymer is the method for reducing the molecular size of the polymer hydrogel for drug diffusion and drug release may be achieved by decrease in the value of swelling of hydrogel [16]. The swelling ratio of all samples in buffer solution of pH (1.2, 4.7 and 6.8) have shown an increase with time. The behavior of swelling using various content of GA (0.22%, 0.44%, 0.66%, 0.88% and 1.1% v\v %) and with constant ratio of chitosan and PVA hydrogel within time indicated that the swelling ability of the hydrogel decreased with the increase of GA amount in hydrogel [17]. The swelling ratio attributed to ionizable functional groups. The concentration of GA had influence on the swelling ratio of hydrogel. The increase of crosslinking agent effect polymer network and which reduces the size of pores upon hydrogel formation [18]. pH influence on swelling IPN hydrogel Figures (6-8) show pH sensitive characterize of IPN hydrogel.All hydrogels samples reached at equilibrium after (60) min, and the swelling test was performed under various pH values (1.2, 4.7 and 6.8). The increase of pH of solution caused increase in the degree of swelling or amount of water content so at pH (6.8), so the highest swelling and that is mainly attributed to the presence of hydroxyl group in PVA and amino groups in a chitosan, correspondingly. In an environment with low density ionic and the pH is almost neutralizing, the equilibrium is derived to the direction, raising the internal osmotic pressure. When PH is increased from (1.2) to (6.8), an abrupt transition in swelling occurs, with the degree of swelling rising more. The amount of swelling depended on ratio of GA at (37C°) with different time as shown in figures (3-6) in different pH. https://doi.org/10.30526/31.1.1861 Chemistry | 151 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 As predictable, the equilibrium degree of the IPN swelling are in reverserelated to GA concentration from (0.22 to 1.1 v\v %), that means when the degree of crosslinking increase, the degree of swelling is decrease. Also when the equilibrium degree is becoming almost natural, so the degree of swelling decreases at all value of pH. The lower degree of swelling is due to the higher network density, which attributed to the network chains became less flexible and reduced the existing free volume pores between the polymer chains [19]. Figure (6): Influence with various ratios of (GA) on swelling for IPN hydrogel in (PH 6.8). Figure (7): Influence with various ratios of (GA) on swelling for IPN hydrogel in (pH 4.7). 0 50 100 150 200 250 300 350 400 450 0 10 20 30 40 50 60 0.22% v\v 0.44% v\v 0.66% v\v 0.88% v\v 1.1% v\v Time / min sw e ll in g  % 0 50 100 150 200 250 300 350 400 0 10 20 30 40 50 60 0.22% v\v 0.44% v\v 0.66% v\v 0.88 % v\v 1.1% v\v Time / min sw e ll in g  % https://doi.org/10.30526/31.1.1861 Chemistry | 152 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Figure (8): Influence with various ratios of (GA) on swelling for IPN hydrogel in (pH 1.2). Influence of crosslinking ratio on (MVH) drug release From figures (9-11), it is seen that a significant decrease in (mebeverine hydrochloride) release rate from PVA\chitosan IPN by increasing the GA% due to the increasing the cross- linking density. Influence of PH on (MVH) drug release With a view to examine the influence of PH on the mebeverine hydrochloride from hydrogels, figures (9-11) signalize that when the PH is increase from (pH 1.2 to pH 6.8) a significant increase in the accumulative release is detected for all IPN. At PH 1.2, the release of drug decreases. This is due to the high acidity that resulted in hydrogen bended and the emigration of drug molecules become low [16]. Thus the (MVH) drug release depends on the PH of the mediaalso on the nature of IPN hydrogel matrix [20]. This suggests that the drugs in the blend can be used to be suitable for the basic environment of the large intestine, colon and rectal mucosa. Figure (9): Release (MVH) for IPN hydrogels with different (GA)contentedat(pH6.8). 0 20 40 60 80 100 120 140 160 180 200 0 10 20 30 40 50 60 0.22 % v\v 0.44 % v\v 0.66 % v\v 0.88  % v\v 1.1  % v\v Time / min sw e ll in g  % https://doi.org/10.30526/31.1.1861 Chemistry | 153 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Figure (10): Release (MVH) forIPN hydrogels withdifferent (GA) contentedat(pH 4.7). Figure (11): Release (MVH) for IPN hydrogels with different (GA) contented at (pH 1.2). Scanning Electron Microscope (SEM) Analysis As shown in figures (12-15), the Scanning Electron Microscope (SEM) of Angstrom advanced, AIS2300, USA IPN hydrogels was clear to naked eye. They show neither separation into two layers, the pore size is reduced. And the surface morphology ofPVA/CS IPN revealednon-porous translucent. https://doi.org/10.30526/31.1.1861 Chemistry | 154 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 Conclusion 1- Modification of PVA and chitosan film by crosslinking with different ratios (0.22%, 0.44%, 0.66%, 0.88% and 1.1% v\v %) GA. 2- FTIR spectroscopy indicates the formation of cross-links hydroxyl groups of PVA and functional group of crosslinking agents chemical crosslinking of chitosan with glutaraldehyde by formation of Schiff base with C=N group. The kind of crosslinking agent and the amount Figure (12): SEM spectrum of chitosan hydrogel. Figure (13): SEM spectrum of PVA hydrogel. Figure (14): SEM spectrum of PVA and chitosan Figure (15): SEM spectrum of PVA and chitosan IPN hydrogel with MVH. IPN hydrogel with (MVH) as drug https://doi.org/10.30526/31.1.1861 Chemistry | 155 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 of crosslinking are very important elements to determining both the drug release and pH – sensitive swelling behavior and. 3- The swelling of PVA/chitosan/GA and hydrogels can be well explained by fiction swelling equilibrium. affected by the density of crosslinking agent, it was found that the maximum swelling ratio was with lowest density of GA. 4- Concerning the type and ratio of crosslinking agent and pH effect on the release up (MVH) for these samples have high release rate drug, it was found that the higher release ratio for the high swelling hydrogel. References [1] J. Maitra, and N. Singh, Swelling behavior of starch chitosan polymeric blend. AdvPolymSciTechnolInt J, 4, 22-27, 2014. [2] M. Hamidi; A. Azadi and P. Rafiei. Hydrogel nanoparticles in drug delivery. Advanced drug delivery reviews, 60(15), 1638-1649, 2008. [3] S. W. Kim;Y. H. Bae and T. Okano. Hydrogels: swelling, drug loading, and release. Pharmaceutical research, 9(3), 283-290, 1992. [4] N. A. Peppas; P. Bures; W. Leobandung and H. Ichikawa. Hydrogels in pharmaceutical formulations. European journal of pharmaceutics and biopharmaceutics, 50(1), 27-46, 2000. [5] A. W. Adamson and A, P. Gast.Physical chemistry of surfaces,1967. [6] N. A. Peppas, Biomedical applications of hydrogels handbook. Springer Science & Business Media, 2010. [7] T. R. Hoare and D. S. Kohen. Hydrogels in drug delivery: progress and challenges. Polymer, 49(8), 1993-2007, 2008. [8] N. M. Ranjha and S. Khan. Chitosan/poly (vinyl alcohol) based hydrogels for biomedical applications: a review. J. Pharm. Altern. Med, 2(1), 30-41, 2013. [9] A. Esmaeili and A. A. Beni. A novel fixed-bed reactor design incorporating an electrospun PVA/chitosan nanofiber membrane. Journal of hazardous materials, 280, 788-796, 2014. [10] I. A. Naguib and H. W. Darwish. Support vector regression and artificial neural network models for stability indicating analysis of mebeverine hydrochloride and sulpiride mixtures in pharmaceutical preparation: A comparative study. SpectrochimicaActa Part A: Molecular and Biomolecular Spectroscopy, 86, 515-526, 2012. [11] E. F. D.; F. S. Campos; A. P. Lage; R.C. Leite; L.G. Heneine; W.L.Vasconcelos,... and H.S.Mansur,. Synthesis and characterization of poly (vinyl alcohol) hydrogels and hybrids for rMPB70 protein adsorption. Materials Research, 9(2), 185-191, 2006. [12] T. Uragami; T. Matsuda; H. Okuno and T. Miyata. Structure of chemically modified chitosan membranes and their characteristics of permeation and separation of aqueous ethanol solutions. Journal of Membrane Science, 88(2-3), 243-251, 1994. [13] T. Banerjee;S. Mitra; A.K. Singh; R. K., Sharma and A. Maitra. Chitosan nanoparticles cross-linked with glutaraldehyde to become ultrafine nanoparticles: Preparation, characterization and biodistribution of ultrafine chitosan nanoparticles. Int J Pharm, 243(1-2), 93-105, 2002. [14] N. T. Nguyen and J. H. Liu. Fabrication and characterization of poly (vinyl alcohol)/chitosan hydrogel thin films via UV irradiation. European Polymer Journal, 49(12), 4201-4211, 2013. [15] U. Edlund and A. C. Albertsson. Degradable polymer microspheres for controlled drug delivery. In Degradable aliphatic polyesters (pp. 67-112). Springer Berlin Heidelberg, 2002. [16] A. K. Amine "swelling, behavior and drug release of cross-linked poly (vinyl alcohol)" .M.S.C. Thesis, University of Baghdad, College of Education for pure since, (Ibn-Al- Haitham), 2015. https://doi.org/10.30526/31.1.1861 Chemistry | 156 2018) عام 1العدد ( 13لمجلد ا مجلة إبن الهيثم للعلوم الصرفة والتطبيقية Ibn Al-Haitham Jour. for Pure & Appl. Sci. Vol. 31 (1) 2018 [17] J. M. Chupa; A. M. Foster;S. R. Sumner; S. V. Madihally and H.W.Matthew .Vascular cell responses to polysaccharide materials:: in vitro and in vivo evaluations. Biomaterials, 21(22), 2315-2322, 2000. [18] H. Park, and D. Kim.Swelling and mechanical properties of glycol chitosan/poly (vinyl alcohol) IPN‐type superporous hydrogels. Journal of Biomedical Materials Research Part A, 78(4), 662-667, 2006. [19] N. B. Milosavljević; L. M. Kljajević; I. G. Popović, J. M. Filipović, and M. T. KalagasidisKrušić. Chitosan, itaconic acid and poly (vinyl alcohol) hybrid polymer networks of high degree of swelling and good mechanical strength. Polymer International, 59(5), 686- 694, 2010. [20] U. K. Parida; A. K. Nayak; B. K. Binhani, and P. L.Nayak. Synthesis and characterization of chitosan-polyvinyl alcohol blended with cloisite 30B for controlled release of the anticancer drug curcumin. Journal of Biomaterials and Nanobiotechnology, 2(04), 414, 2011.