Copyright Notice Consent to publish: The Author(s) agree to publish their articles with IIUM Press. Declaration: The Author(s) declare that the article has not been published before in any form and that it is not concurrently submitted to another publication, and also that it does not infringe on anyone's copyright. The Author(s) holds the IIUM Press and Editors of the journal harmless against all copyright claims. Transfer of copyright: The Author(s) hereby agree to transfer the copyright of the article to IIUM Press, which shall have the non-exclusive and unlimited right to publish the article in any form, including in electronic media. For the article with more than one author, the corresponding author confirms that he/she is authorized by his/her co-author(s) to grant this transfer of copyright. The IIUM Engineering journal follows the open access policy. All articles published open access will be immediately and permanently free for everyone to read, download, copy and distribute for noncommercial purposes. IIUM Engineering Journal at https://journals.iium.edu.my/ejournal is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. IIIUM Engineering Journal IIUM ENGINEERING JOURNAL EDITORS CHIEF EDITOR Ahmad Faris Ismail, IIUM, Malaysia TECHNICAL EDITOR Sany Izan Ihsan, IIUM, Malaysia EXECUTIVE EDITOR AHM Zahirul Alam, IIUM, Malaysia ASSOCIATE EDITOR Nor Farahidah Za’bah, IIUM, Malaysia LANGUAGE EDITOR Lynn Mason, Malaysia COPY EDITOR Hamzah Mohd. Salleh, IIUM, Malaysia MALAY TRANSLATOR Nurul Arfah Che Mustapha, IIUM, Malaysia EDITORIAL BOARD MEMBERS Abdullah Al-Mamun, IIUM, Malaysia Abdumalik Rakhimov, IIUM, Malaysia Aishah Najiah Bt. Dahnel, IIUM, Malaysia Alya Naili Binti Rozhan, IIUM, Malaysia Norsinnira Bt. Zainul Azlan, IIUM, Malaysia Hanafy Omar, Saudi Arabia Hazleen Anuar, IIUM, Malaysia Konstantin Khanin, University of Toronto, Canada Ma'an Al-Khatib, IIUM, Malaysia Meftah Hrairi, IIUM, Malaysia Mohamed B. Trabia, United States Mohammad S. Alam, Texas A&M University-Kingsville, United States Mustafizur Rahman, National University Singapore, Singapore Ossama Abdulkhalik, Michigan Technological University, United States Mohamed Hadi Habaebi, IIUM, Malaysia Mohd. Sultan Ibrahim Bin Shaik Dawood, IIUM, Malaysia Muhammad Ibn Ibrahimy, IIUM, Malaysia Nor Fadhillah Mohamed Azmin, IIUM, Malaysia Waqar Asrar, IIUM, Malaysia AIMS & SCOPE OF IIUMENGINEERING JOURNAL The IIUM Engineering Journal, published biannually (January and July), is a carefully refereed international publication of International Islamic University Malaysia (IIUM). Contributions of high technical merit within the span of engineering disciplines; covering the main areas of engineering: Electrical and Computer Engineering; Mechanical and Manufacturing Engineering; Automation and Mechatronics Engineering; Material and Chemical Engineering; Environmental and Civil Engineering; Biotechnology and Bioengineering; Engineering Mathematics and Physics; and Computer Science and Information Technology are considered for publication in this journal. Contributions from other areas of Engineering and Applied Science are also welcomed. The IIUM Engineering Journal publishes contributions under Regular papers and Invited review papers. It also welcomes contributions that address solutions to the specific challenges of the developing world, and address science and technology issues from an Islamic and multidisciplinary perspective. REFEREES’ NETWORK All papers submitted to IIUM Engineering Journal will be subjected to a rigorous reviewing process through a worldwide network of specialized and competent referees. Each accepted paper should have at least two positive referees’ assessments. SUBMISSION OF A MANUSCRIPT A manuscript should be submitted online to the IIUM-Engineering Journal website at https://journals.iium.edu.my/ejournal. Further correspondence on the status of the paper could be done through the journal website. ii INTERNATIONAL ADVISORY COMMITTEE A. Anwar, United States Abdul Latif Bin Ahmad, Malaysia Farzad Ismail, USM, Pulau Pinang, Malaysia Hanafy Omar, Saudi Arabia Hany Ammar, United States Idris Mohammed Bugaje, Nigeria K.B. Ramachandran, India Kunzu Abdella, Canada Luis Le Moyne, ISAT, University of Burgundy, France M Mujtaba, United Kingdom Mohamed AI-Rubei, Ireland Mohamed B Trabia, United States Syed Kamrul Islam, United States Tibor Czigany, Budapest University of Technology and Economics, Hungary Yiu-Wing Mai, The University of Sydney, Australia. Published by: IIUM Press, International Islamic University Malaysia Jalan Gombak, 53100 Kuala Lumpur, Malaysia Phone (+603) 6421-5014, Fax: (+603) 6421-6298 Whilst every effort is made by the publisher and editorial board to see that no inaccurate or misleading data, opinion or statement appears in this Journal, they wish to make it clear that the data and opinions appearing in the articles and advertisement herein are the responsibility of the contributor or advertiser concerned. Accordingly, the publisher and the editorial committee accept no liability whatsoever for the consequence of any such inaccurate or misleading data, opinion or statement. IIUM Engineering Journal ISSN: 1511-788X E-ISSN: 2289-7860 iii iii IIUM Engineering Journal Volume 24, Issue 2, July 2023 https:/doi.org/10.31436/iiumej.v24i2 Table of Contents COPYRIGHT .............................................................................................................................................................. i EDITORIAL .............................................................................................................................................................. ii CHEMICAL AND BIOTECHNOLOGY ENGINEERING 2590: BIODEGRADATION OF FATS, OIL AND GREASE USING MICROORGANISMS ISOLATED FROM PALM OIL MILL EFFLUENT ......................................................................................................................................... 1 Ma'an Fahmi Rashid Al Khatib., Fadi Alqedra and Md. Zahangir Alam 2650: EXPERIMENTAL AND COMPUTATIONAL ANALYSIS FOR OPTIMIZATION OF SEAWATER BIODEGRADABILITY USING PHOTO CATALYSIS ........................................................................................ 11 Nayeemuddin Mohammed, Puganeshwary Palaniandy, Feroz Shaik and Hiren Mewada 2709: EFFECTS OF HIVE SIZES AND MESH MATERIALS ON THE PRODUCTIVITY OF PROPOLIS AND HONEY PRODUCED BY TETRAGONULA LAEVICEPS ............................................................................................... 34 Muhammad Yusuf Abduh, Annisa Shabrina, Andreas Raden Caman, Arsy Elia Pratiwi and Muhammad Ihsanu 2717: PARAMETRIC OPTIMIZATION OF OIL PALM MESOCARP FIBER VALORIZATION WITH HYBRID OZONATION-ULTRASONIC PRETREATMENT METHOD ............................................................................ 45 Didi Dwi Anggoro, Indahsari Kusuma Dewi, Luqman Buchori and Aji Prasetyaningrum ELECTRICAL, COMPUTER AND COMMUNICATIONS ENGINEERING 2698: CORONARY HEART DISEASE CLASSIFICATION USING IMPROVED PENGUIN EMPEROR OPTIMIZATION- BASED LONG SHORT TERM MEMORY NETWORK ..................................................................................... 67 Rajeshwari Maramgere Ramaiah and Kavitha Kuntaegowdanalli Srikantegowda 2700: TREBLE SEARCH OPTIMIZER: A STOCHASTIC OPTIMIZATION TO OVERCOME BOTH UNIMODAL AND MULTIMODAL PROBLEMS ....................................................................................................................... 86 Purba Daru Kusuma and Ashri Dinimaharawati 2730: THE EFFECTIVENESS OF 6T BEAMFORMER ALGORITHM IN SMART ANTENNA SYSTEMS FOR CONVERGENCE ANALYSIS ...................................................................................................................... 100 Sadiya Thazeen and Mallikarjunaswamy Srikantaswamy 2752: ENHANCEMENT OF MPPT MODULE FOR PARTIAL SHADING PHOTOVOLTAIC SYSTEM UNDER UNIFORM IRRADIANCE CONDITIONS ..................................................................................................................... 117 Hameed Ali Mohammed, Rosmiwati Mohd-Mokhtar and Hazem Ibrahim Ali 2759: SYSTEM IDENTIFICATION (SI) MODELLING, CONTROLLER DESIGN AND HARDWARE TESTING FOR VERTICAL TRAJECTORY OF UNDERWATER REMOTELY OPERATED VEHICLE (ROV) ................................ 131 Fauzal Naim Zohedi, Mohd Shahrieel Mohd Aras, Hyreil Anuar Kasdirin, Mohd Bazli Bahar and Lokman Abdullah 2814: EYE BLINK IDENTIFICATION AND REMOVAL FROM SINGLE-CHANNEL EEG USING EMD WITH ENERGY THRESHOLD AND ADAPTIVE FILTER ....................................................................................................... 141 Lutfi Aizat Mohamed Jefri, Faridah Abd Rahman, Noreha Abdul Malik and Farah Nadia Mohd Isa ENGINEERING MATHEMATICS AND APPLIED SCIENCE 2550: MODIFIED SEIRD MODEL: A NOVEL SYSTEM DYNAMICS APPROACH IN MODELLING THE SPREAD OF COVID-19 IN MALAYSIA DURING THE PRE-VACCINATION PERIOD ......................................................... 159 Norsyahidah Zulkarnain, Nurul Farahain Mohammad and Ibrahim Shogar 2736: NON-NEWTONIAN VISCOSITY BEHAVIOUR INVESTIGATION FOR MALAYSIAN WAXY CRUDE OILS AND IMPACT TO WAX DEPOSITION MODELLING ........................................................................................... 184 Astriyana Anuar, Ismail Mohd Saaid, Petrus Tri Bhaskoro and Rohaizad Mohd Norpiah iv MATERIALS AND MANUFACTURING ENGINEERING 2442: BEHAVIORS OF THERMOELASTIC PROPERTIES IN NI-TI-BASED SHAPE MEMORY ALLOYS, PROCESSED BY METAL FORMING TECHNIQUES .............................................................................................................. 209 Tarsila Tenório Luna da Silva, Fillipe Virgolino, Niédson Silva, Carlos Oliveira, Carlos Araújo, Oscar Olimpio de Araujo Filho and Cezar Gonzalez 2778: EFFECT OF PRINTING PARAMETERS AND POST-CURING ON MECHANICAL PROPERTIES OF PHOTOPOLYMER PARTS FABRICATED VIA 3D STEREOLITHOGRAPHY PRINTING .................................... 225 Raffle Raed Diab, Abass Enzi and Omar Hashim Hassoon 2787: MULTICRITERIA DECISION MAKING ON SUPPLIER SELECTION USING SOCCER MODEL INTEGRATED WITH ANALYTICAL HIERARCHY PROCESS .......................................................................................................... 239 Muataz Al Hazza, Azura Binti Dapit, Islam faisal Bourini, Zubaidah Muataz and Mohammad Yeakub Ali 2810: ENHANCING SUSTAINABILITY INDEX PARAMETER USING ANFIS COMPUTATIONAL INTELLIGENCE MODEL .................................................................................................................................................... 258 Diah Septiyana, Mohamed Abd. Rahman, Tasnim Firdaus Mohamed Ariff, Nor Aiman Sukindar and Erry Yulian Triblas Adesta MECHANICAL AND AEROSPACE ENGINEERING 2554: USE OF TIO2 AS A REINFORCEMENT OF CASSAVA STARCH/PVA COMPOSITES ON MOISTURE-RESISTANT PROPERTIES OF TRIBOELECTRIC NANOGENERATORS (TENG) FILM ........................................................ 269 Aris Ansori, Sudjito Soeparman, Denny Widhiyanuriyawan and Teguh Dwi Widodo 2695: A COMPARATIVE FINITE ELEMENT ANALYSIS OF REGULAR AND TOPOLOGICALLY OPTIMISED DENTAL IMPLANTS FOR MECHANICAL AND FATIGUE RESPONSES EVALUATION ................................................. 286 Muhammad Ikman Ishak, Ruslizam Daud, Bakri Bakar and Siti Noor Fazliah Mohd Noor MECHATRONICS AND AUTOMATION ENGINEERING 2296: HIGH ACCURACY HUMAN MOTION TRAJECTORY GENERATION FOR EXOSKELETON ROBOT USING CURVE FITTING TECHNIQUE .................................................................................................................... 301 Muhammad Abdul Jalil, Muhammad Fahmi Miskon and Bazli Bin Bahar 2766: TRIPLE NONLINEAR HYPERBOLIC PID WITH STATIC FRICTION COMPENSATION FOR PRECISE POSITIONING OF A SERVO PNEUMATIC ACTUATOR ................................................................................ 315 Khairun Najmi Kamaludin1, Lokman Abdullah, Syed Najib Syed Salim, Zamberi Jamaludin, Nur Aidawaty Rafan, Mohd Fua'ad Rahmat and Rprakash Ramanathan 2781: APPLICATION OF DRIVING BEHAVIOR CONTROL SYSTEM USING ARTIFICIAL NEURAL NETWORK TO IMPROVE DRIVING COMFORT BY ADJUSTING AIR-TO-FUEL RATIO .......................................................... 337 Aris Triwiyatno, Suroto Munahar, M. MUnadi and Joga Dharma Setiawan 2799: A ROBUST FRAMEWORK FOR DRIVER FATIGUE DETECTION FROM EEG SIGNALS USING ENHANCEMENT OF MODIFIED Z-SCORE AND MULTIPLE MACHINE LEARNING ARCHITECTURES ....................................... 354 Rafiuddin Abdubrani, Mahfuzah Mustafa, and Zarith Liyana Zahari 2803: 3D COLLISION AVOIDANCE SYSTEM FOR UNMANNED AERIAL VEHICLE (UAV) WITH DECENTRALIZED APPROACH ............................................................................................................................................... 373 Mohamad Haniff Harun, Shahrum Shah Abdullah, Mohd Shahrieel Mohd Aras, Mohd Bazli Bahar and Fariz Ali@Ibrahim 2804: EMG BASED CONTROL OF WRIST EXOSKELETON ..................................................................................... 391 Mohd Safirin Karis, Hyreil Anuar Kasdirin, Norafizah Abas, Wira Hidayat Mohd Saad and Mohd Shahrieel Mohd Aras 2832: FEATURE EXTRACTION AND SUPERVISED LEARNING FOR VOLATILE ORGANIC COMPOUNDS GAS RECOGNITION .......................................................................................................................................... 407 Nor Syahira Mohd Tombel, Hasan Firdaus Mohd Zaki, and Hanna Farihin Binti Mohd Fadglullah 1-CoverPage 2-CopyRight-Jan2023-V24N1 3-Editorial_Board-Jan2023-V24N1 4-TOC-Volume 24 No.2 2023-July