# bib

id: ijemm-20
author: Johari, Norhasnidawani; Hassan, Noor Azlina; Hassan, Norita; Ani, Mohd Hanafi
title: Effect of Nanoparticles on Wettability of Nanocoating on Carbon Steel
date: 2016-12-19
pages: 4
extension: .pdf
mime: application/pdf
words: 1927
sentence: 142
flesch: 58
cache: cache/ijemm-20.pdf
txt: txt/ijemm-20.txt
summary:
  Vacuum oil dropping onto carbon steel showed that there are strong adhesive forces on nanocoating surfaces due low surface tension and increases the area of solid surface contact [11]. Based on Figures 1, deionized water drop on carbon steel surface showed that partial wetting occurred.


id: ijemm-17
author: Mohamad, Norsalawani Binti; Bahar, Rubina
date: 2016-12-19
pages: 6
extension: .pdf
mime: application/pdf
words: 2625
sentence: 144
flesch: 58
cache: cache/ijemm-17.pdf
txt: txt/ijemm-17.txt
title:
  Minimum Quantity Lubrication (MQL) and its Effect on Tool Wear During Miniature Drilling :an Experimental Study

summary:
  Keywords: Minimum Quantity Lubrication (MQL), Micro-drilling, HSS drill bit, Carbide drill bit, Tool wear. In all metal cutting operations, one of the most significant limitation is tool wear.


id: ijemm-23
date: 2017-07-01
pages: 6
extension: .pdf
mime: application/pdf
words: 2729
sentence: 150
flesch: 61
cache: cache/ijemm-23.pdf
txt: txt/ijemm-23.txt
author:
  Ibrahim, Nur Asmawiyah; Hazza, Muataz; Adesta, Erry Yulian Triblas; Endut, Nor Amalina; Asman, Asyfiq Hanif

title:
  Experimental Study of Stress-Strain Behaviour of Open-Cell Aluminium Foam Sandwich Panel for Automotive Structural Part

summary:
  Because of its low-cost manufacturing process and more convenience, aluminium foam tends to be chosen more compared to other type of metallic foam. LM routes used melting aluminium that then foamed to be aluminium foam.


id: ijemm-32
author: Debnath, Sujan; Abdullah, Abdul Hamid
date: 2017-09-14
pages: 9
extension: .pdf
mime: application/pdf
words: 3070
sentence: 145
flesch: 55
cache: cache/ijemm-32.pdf
txt: txt/ijemm-32.txt
title:
  Mechanical Performance of Cockle Shell Particles (CSP) and Oil Palm Fibre (OPF) Reinforced Epoxy Composite

summary:
  Figure 13: Optical microscope image of cockle shell particle epoxy composite with size in (a) Range 1 (≥ 62 and < 212 µm), and (b) Range 3 (≥ 425 and < 500 µm) Figure 14: Optical microscope of cockle shell particle and oil palm fibre reinforced epoxy composite 4 CONCLUSIONS • Morphology analysis showed that smaller size of cockle shell particles composite had good dispersion of particle compared to larger size of particles.


id: ijemm-191
author: Mohamad Hanapiah, Afif; Islam, Sumaiya; Khandoker, Neamul; Abdul Md, Mazid
date: 2021-07-15
pages: 8
extension: .pdf
mime: application/pdf
words: 2893
sentence: 167
flesch: 62
cache: cache/ijemm-191.pdf
txt: txt/ijemm-191.txt
title:
  Shear and Hardness Properties Study of AA-6061 Aluminium Alloy Lap-Joints Produced by Friction Stir Spot Welding Process Using H13 Tool Steel

summary:
  The operational window of friction spot stir welding is shown in Table 2 and Figure 6. By using a CNC milling machine, friction spot stir welding was performed successfully.


id: ijemm-18
author: Nuruzzaman, Dewan Muhammad; Kamaruzaman, Farah Fazira; Azmi, Nasrah Mohd
title: Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials
date: 2016-12-19
pages: 6
extension: .pdf
mime: application/pdf
words: 2971
sentence: 141
flesch: 40
cache: cache/ijemm-18.pdf
txt: txt/ijemm-18.txt
summary:
  Microstructure and properties of zinc oxide whiskers reinforced aluminium based composites were investigated [10]. For structural applications, aluminium based metal matrix composites have significant potential due to their high stiffness, modulus, specific strength, corrosion and wear resistance.


id: ijemm-120
author: Jonjo, Robert Emmanuel; Nyalloma, Sahr Tamba
title: Modeling the Effect of Road Excitation on Vehicle Suspension System
date: 2020-03-30
pages: 10
extension: .pdf
mime: application/pdf
words: 3382
sentence: 198
flesch: 68
cache: cache/ijemm-120.pdf
txt: txt/ijemm-120.txt
summary:
  Vehicle suspension system should therefore isolate the vehicle body from road disturbances in order to give maximum passenger ride comfort whiles retaining continuous road-wheel contact so as to provide excellent road holding (Changizil and Rouhani 2011). Increasing damping coefficient reduces car body displacement and suspension travel considerably but vertical acceleration increases whereas an increase in the stiffness of vehicle suspension leads to an increase in vertical acceleration.


id: ijemm-107
author: Ahmed, Yassin Mustafa; Lafta, Hameed D.; Rahman, A. A. Abdul; Salih, Barzan Talib
date: 2020-08-12
pages: 8
extension: .pdf
mime: application/pdf
words: 3452
sentence: 181
flesch: 56
cache: cache/ijemm-107.pdf
txt: txt/ijemm-107.txt
title:
  Experimental Study of the Performance of Base Metal and Welding Line of the Household LPG Cylinder Manufactured in Kurdistan Region 

summary:
  4. Methodology 4.1 Chemical Composition Analysis of LPG Cylinder: To achieve this study, we used three of LPG cylinder from different company and different cities (B, C, D), and an unformed plate (A) to making the specimens. The experiments were carried out on three types of LPG cylinder using in Kurdistan regions A, B, and C and an unformed plate.


id: ijemm-10
author: Riza, Muhammad; Adesta, Erry Y. T.
title: Cutting Temperature Investigation of AISI H13 in High Speed End Milling
date: 2016-10-03
pages: 8
extension: .pdf
mime: application/pdf
words: 3456
sentence: 194
flesch: 59
cache: cache/ijemm-10.pdf
txt: txt/ijemm-10.txt
summary:
  This is due to heat produced during milling process at low cutting speed engaged with workpiece longer than at high cutting speed. During the machining, most of the power consumed for plastic deformation is converted into heat, and high temperatures are generated.


id: ijemm-196
author: Ali, Mohammad Yeakub; Rahim, Ahmad Syahmi; Ya'akub, Seri Rahayu
title: Solar Energy System for Brunei Residence
date: 2021-10-01
pages: 7
extension: .pdf
mime: application/pdf
words: 3596
sentence: 204
flesch: 55
cache: cache/ijemm-196.pdf
txt: txt/ijemm-196.txt
summary:
  Ali et al. (2021): International Journal of Engineering Materials and Manufacture, 6(4), 312-318 314 Figure 1: Schematic Diagram of an Off-Grid System (Alkhadi & Dulaimi, 2018) 3 SOLAR SYSTEM DESIGNS Numerous studies have been published with regards to the different designs of solar systems in different countries. Some studies also include the calculation of payback period of the system to show the worth of implementing solar photovoltaic system for residences. 3.1 Daily Load Estimation and Sun Hours


id: ijemm-43
author: Ali, Jaffar Syed Mohammed; Hrairi, Meftah; Mohamad, Masturah
title: Stress Analysis of Thin-Walled Laminated Composite Beams under Shear and Torsion
date: 2018-03-30
pages: 9
extension: .pdf
mime: application/pdf
words: 3558
sentence: 212
flesch: 70
cache: cache/ijemm-43.pdf
txt: txt/ijemm-43.txt
summary:
  DIFF 7.26 3.1.2 Beam Under Shear Force The following section shows the results for I- section beam under -100lb shear force at the centre of the web. Stress Analysis of Laminated Composite Beams with I-Section.


id: ijemm-227
author: Nallagangula, Dinesh Reddy; Mazid, Abdul Md; Khandoker, Neamul
title: Surface Integrity Study of Ti-Alloy using Optimal Cutting Speed
date: 2022-07-20
pages: 7
extension: .pdf
mime: application/pdf
words: 3543
sentence: 177
flesch: 53
cache: cache/ijemm-227.pdf
txt: txt/ijemm-227.txt
summary:
  This article provides details of lathe turning for investigation of surface roughness for varying cutting parameters. Real life experimental investigation has allowed to express the results in graphical form (using tabulated data) that has suggested best ranges of cutting regimes (parameters) for obtaining the best ranges of surface roughness for machining Ti-6Al-4V using uncoated carbide tool.


id: ijemm-173
author: Nader, Ameer Jalil; Saad, K. Shather
title: Influence of Abrasive Water Jet (AWJ) on Surface Roughness
date: 2021-07-15
pages: 9
extension: .pdf
mime: application/pdf
words: 3879
sentence: 214
flesch: 54
cache: cache/ijemm-173.pdf
txt: txt/ijemm-173.txt
summary:
  Satyanarayana B. and Srikar G., Optimization of abrasive water jet machining process parameters using Taguchi Grey Relational Analysis (TGRA), International Journal of Mechanical And Production Engineering, vol. Yuvaraj N., Pradeep Kumar M., Multiresponse optimization of abrasive water jet cutting process parameters using TOPSIS approach, Mater.


id: ijemm-201
author: Islam, Saiful
title: Artificial Intelligence in Healthcare
date: 2021-10-01
pages: 5
extension: .pdf
mime: application/pdf
words: 3423
sentence: 219
flesch: 36
cache: cache/ijemm-201.pdf
txt: txt/ijemm-201.txt
summary:
  Artificial Intelligence in Healthcare. Artificial Intelligence in Healthcare Saiful Islam Received: 11 April 2021 Accepted: 23 July 2021 Published: 01 October 2021


id: ijemm-37
author: Junyi, Koh; Hasan, Nurul
title: Review of the Factors that Influence the Condition of Wax Deposition in Subsea Pipelines
date: 2018-03-30
pages: 8
extension: .pdf
mime: application/pdf
words: 4214
sentence: 249
flesch: 61
cache: cache/ijemm-37.pdf
txt: txt/ijemm-37.txt
summary:
  Keywords: Wax deposition; influential factors for wax deposition; wax model development SYMBOL/ABBREVIATION WAT Wax Appearance Temperature, °C Tp Temperature of the walls of pipeline, °C Tf Temperature of the fluid in the pipeline, °C ΔT Temperature difference between Tp and Tf, °C WD Wax deposition, weight in percentage (%) FR Flow rate, ml/min RS Residence time, min RN Reynolds number (based on dia) INTRODUCTION It is found the main factor that causes wax deposition in the pipeline is the difference in temperature between the petroleum pipeline and the fluid flowing within.


id: ijemm-116
author: Abutu, J.; Lawal, S.A.; Ndaliman, M.B.; Lafia-Araga, R.A.; Abdulrahman, A.S.
title: Effects of Particle Size Distribution on the Properties of Natural-Based Composite
date: 2019-12-11
pages: 8
extension: .pdf
mime: application/pdf
words: 3747
sentence: 139
flesch: 44
cache: cache/ijemm-116.pdf
txt: txt/ijemm-116.txt
summary:
  Also, the effects of particle size distribution on the performance of sourced coconut shells and seashells-based composite was investigated. Therefore, in this study, the effects of particle size distribution on the performance of locally sourced coconut shells and seashells-based composite was investigated by characterizing the powders and developed composite using particle size analyser (Zetasizer nano) and standard testing methods respectively.


id: ijemm-204
author: Uddin, Md Sanuwar ; Abedin, Mohammad Zoynal
title: Segregation of Plastic Waste from Solid Waste Stream: Bangladesh Perspective
date: 2021-10-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4070
sentence: 217
flesch: 60
cache: cache/ijemm-204.pdf
txt: txt/ijemm-204.txt
summary:
  Segregation of Plastic Waste from Solid Wastes: Bangladesh Perspective. Rather, a proper segregation system to recover of resource from plastic wastes can play a very important role in mitigating the difficulties of solid waste that can act as a raw material for product design in Bangladesh too.


id: ijemm-169
title: Tool Feed and Burr Size Influence on Wettability of Ti6Al4V Micro End-Milled
date: 2021-07-15
pages: 10
extension: .pdf
mime: application/pdf
words: 4264
sentence: 284
flesch: 57
cache: cache/ijemm-169.pdf
txt: txt/ijemm-169.txt
author:
  Ferreira, Rodrigo; Lopes de Castro Martinelli, Gabriel ; Roger Rodrigues, Alessandro; Teixeira Coelho, Reginaldo

summary:
  Therefore, surface wettability depends on channel direction, burr size and tool feed per tooth, as well. The way to initially assess cell adhesion is using surface wettability, usually conducted with water.


id: ijemm-178
author: Almusaied, Zaid; Asiabanpour, Bahram
title: A Novel Design of Hybrid Hydrophilic-Superhydrophobic Surfaces for Fog Harvesting
date: 2021-07-15
pages: 11
extension: .pdf
mime: application/pdf
words: 4715
sentence: 368
flesch: 56
cache: cache/ijemm-178.pdf
txt: txt/ijemm-178.txt
summary:
  The previous mechanism assumed the WCR is only associated with fog water droplets, while the high saturation occurring during the experiment might lead to the water vapor phase transition. Mondal et al. used needles as the hydrophilic part and penetrated them through superhydrophobic sheets to create hybrid surfaces for water collection by dewing [16].


id: ijemm-219
author: Hasan, Md. Najmul ; Islam, Samsul; Abedin, Mohammad Zoynal
title: Performance Evaluation of Textile Effluent Treatment Plant: Bangladesh Perspective
date: 2022-01-01
pages: 10
extension: .pdf
mime: application/pdf
words: 5853
sentence: 276
flesch: 58
cache: cache/ijemm-219.pdf
txt: txt/ijemm-219.txt
summary:
  No sample cell needs sample water 10 ml), start program 120 Colour, 455 nm or program 125 colour, 465 nm whether 1 No Sample (distilled water cell) to program zero then 2 no sample to push read then result. Within the study, the utmost average of temperature within the inlet was recorded 41.9⁰C in week2 and minimum temperature 39.48⁰C in week4 and on the opposite hand, the utmost mean of temperature within the outlet was recorded 34.33⁰C in week 4 and minimum temperature was 32.2⁰C in week 2.


id: ijemm-100
author: Sukirman, Engkir ; Sarwanto, Yosef; Insani, Andon ; Adi, Wisnu Ari; Buys, Yose Fachmi
title: Weak Ferromagnetic Property and Electromagnetic Waves Absorption Characteristic of La(1-x)BaxMnO3
date: 2019-09-18
pages: 11
extension: .pdf
mime: application/pdf
words: 5389
sentence: 268
flesch: 57
cache: cache/ijemm-100.pdf
txt: txt/ijemm-100.txt
summary:
  Measurement of magnetic properties of materials was made in an applied magnetic field to a maximum value of 1 Tesla. Monte Carlo study of phase transitions and magnetic properties of LaMnO3: Heisenberg model.


id: ijemm-3
author: Banu, Asfana; Ali, Mohammad Yeakub
title: Electrical Discharge Machining (EDM): A Review
date: 2016-09-03
pages: 8
extension: .pdf
mime: application/pdf
words: 5329
sentence: 426
flesch: 57
cache: cache/ijemm-3.pdf
txt: txt/ijemm-3.txt
summary:
  Study on dry electrical discharge machining. Dry electrical discharge machining of cemented carbide.


id: ijemm-121
author: Ali, Mohammad Yeakub
title: An Open Letter to All IJEMM Members on COVIDâ€“19
date: 2020-03-26
pages: 1
extension: .pdf
mime: application/pdf
words: 275
sentence: 15
flesch: 44
cache: cache/ijemm-121.pdf
txt: txt/ijemm-121.txt
summary:
  Dr. Mohammad Yeakub Ali Editor-In-Chief International Journal of Engineering Materials and Manufacture The Author(s) Creative Commons: CC BY 4.0 Dear IJEMM Members I wanted to provide an update to the broader community of International Journal of Engineering Materials and Manufacture (IJEMM) regarding our efforts to alleviate the spread of the COVID-19 coronavirus.


id: ijemm-113
author: Hazra, Mrityunjoy; Singh, Satyapal
date: 2020-06-25
pages: 11
extension: .pdf
mime: application/pdf
words: 6081
sentence: 304
flesch: 54
cache: cache/ijemm-113.pdf
txt: txt/ijemm-113.txt
title:
  Failures of Flexible Diaphragm Couplings of Power Take Off (PTO) Shafts of an Aircraft by Surface Discontinuity, Controlled by Stress Concentration or Stress Intensity Factor

summary:
  It also covers the periphery region near the rim. Fig. 4: (a) Schematic view of PTO shaft, EMAGB and AMAGB assemblies of aircraft system, (b) detailed schematic drawing of the flexible diaphragm couplings. Fig. Flexible diaphragm couplings employed in aircraft engine definitely belongs to high performance coupling types, by this definition.


id: ijemm-234
author: Abdullah, Md; Abedin, Mohammad Zoynal; Hossen, Saddam
date: 2022-10-25
pages: 8
extension: .pdf
mime: application/pdf
words: 5939
sentence: 384
flesch: 55
cache: cache/ijemm-234.pdf
txt: txt/ijemm-234.txt
title:
  Effects of Fire Hazards Due to Leakage in Gas Circulation Lines in Bangladesh: A Comprehensive Review

summary:
  Gas leaks pose a threat to the environment and to individuals. Byproducts of gas leaks connected to industrial machinery and operations are fugitive emissions.


id: ijemm-245
date: 2023-01-20
pages: 12
extension: .pdf
mime: application/pdf
words: 6190
sentence: 270
flesch: 53
cache: cache/ijemm-245.pdf
txt: txt/ijemm-245.txt
author:
  Odiwo, Hammed; Adeyemi, Bello kamilu; Malik, Abdulwahab; Adetayo, Adebisi Abdulmumin; Umma, Abdullahi; Mamuda, Dodo Rayyan; Maleque, Md. Abdul; Uhuotu, Suleiman Muhammad

title:
  Study on the Optimization of Surface Modification Processing of SiCp and Tribological Properties of AA6061-SiCp based Composites

summary:
  This may be attributed to larger quantity of SiCp reinforcement particles present in the composite material which may have improved the load bearing strength of the composite, thereby reducing its plastic deformation. The furnace was set to heat the samples at a heating rate of 10 °C/min. After attainment of the desired temperatures, SiCp samples were held at each temperature for 2hrs and then allowed to cool in air (Vantrinh et al., 2018 and Lee et al., 2020).


id: ijemm-224
title: A Review on Blockchain Technology for Distribution of Energy
date: 2022-04-22
pages: 10
extension: .pdf
mime: application/pdf
words: 6172
sentence: 449
flesch: 50
cache: cache/ijemm-224.pdf
txt: txt/ijemm-224.txt
author:
  Islam, Md Rafiqul; Muhammad Mahbubur Rahman; Mohammed Ataur Rahman; Muslin Har Sani Mohamad; Abd Halim Embang

summary:
  Figure 1: Research Methodology Overview 3 Technology Overview of Energy Management System This section includes an overview of distributed energy systems, the overview of blockchain and how the technology works, the application of blockchain in the energy sector, and the electricity market. Renewable Energy Certificate (REC) maybe play an important role to increase the investment in the field of distributed energy systems which may reduce the emission of carbon dioxide in the environment [41].


id: ijemm-217
author: Momeni, Nika; Javadifar, Kayla ; Patrick, Maria A.; Hasan, Muhammad Hasibul; Chowdhury , Farhana
title: A Review on Gold Nanoparticles-Based Biosensors in Clinical and Non-Clinical Applications
date: 2022-01-01
pages: 12
extension: .pdf
mime: application/pdf
words: 6817
sentence: 446
flesch: 41
cache: cache/ijemm-217.pdf
txt: txt/ijemm-217.txt
summary:
  Optical biosensors are optimal due to their ability to cater to surface modification, which then leads to the ability for selective bonding. Figure 3 provides a visual representation of the composition of optical biosensors.


id: ijemm-118
author: Mirzajavadkhan, Azin; Rafieian, Saba; Hasan, Muhammad Hasibul
title: Toxicity of Metal Implants and Their Interactions with Stem Cells: A Review
date: 2020-03-26
pages: 10
extension: .pdf
mime: application/pdf
words: 7093
sentence: 487
flesch: 53
cache: cache/ijemm-118.pdf
txt: txt/ijemm-118.txt
summary:
  Embryonic stem cells are an example of stem cells undergoing osteogenic differentiation obtaining from the inner cell mass of blastocyst-stage embryos [12,13,14]. The development of biomaterials has increased rapidly in order to alter the fate of stem cells and use them in therapeutic applications.


id: ijemm-185
author: Ndagi, Mustapha; Kolawole, Ajiboye Tajudeen; Olawale, Fabiyi Mustapha; Sulaiman, Abdulkareem
date: 2021-10-01
pages: 17
extension: .pdf
mime: application/pdf
words: 7594
sentence: 283
flesch: 49
cache: cache/ijemm-185.pdf
txt: txt/ijemm-185.txt
title:
  Investigation of the Thermo-Physical and Mechanical Properties of Coir and Sugarcane Bagasse for Low Temperature Insulation

summary:
  Dávid Bozsaky, “The historical development of thermal insulation materials,” Ŕ Periodica Polytechnica Architecture 41/2 (2010) 49–56 doi: 10.3311/pp.ar.2010-2.02, 2011 2. Their results showed that banana bagasse has lower thermal conductivity compared to sugarcane bagasse used, with compressive strength of 15.6 MPa with thermal conductivity 0.6 W/mK. 3 MATERIALS AND MATERIALS PREPARATION Materials used for this research were sugarcane bagasse obtained from Batati, Niger State and coconut fibre (coir) obtained from Badagry, Lagos State.


id: ijemm-180
author: Summers, Mark; Asiabanpour, Bahram
title: Improving Heat Transfer from Peltier Devices Used in an Atmospheric Water Generation
date: 2021-07-15
pages: 6
extension: .pdf
mime: application/pdf
words: 2818
sentence: 152
flesch: 45
cache: cache/ijemm-180.pdf
txt: txt/ijemm-180.txt
summary:
  Current commercially available AWG systems from companies like Innovaqua Water Solutions, Quality Water Treatment, and Atmospheric Water Solutions have products that can produce water, but have two major drawbacks that we want to address in this research: • Requirements for uninterrupted reliable access to grid power. AWG systems cool a surface and then pass air over it, allowing the moisture to be extracted from the air as it passes [8-9].


id: ijemm-207
author: Sali, Akash Rajendra; Patel, Vivek; Hyder, James; Hyder, David ; Corliss, Mike ; Hung, Wayne
title: Electron-Beam Welding of Laser Powder-Bed-Fused Inconel 718
date: 2021-07-15
pages: 16
extension: .pdf
mime: application/pdf
words: 7960
sentence: 419
flesch: 64
cache: cache/ijemm-207.pdf
txt: txt/ijemm-207.txt
summary:
  The sheets of IN718 samples were solution treated at 950˚C for 1hr followed by water quenching. A similar trend was observed for EBW of rolled IN718 samples


id: ijemm-30
author: Feng, Zhujian; Orona-Hinojos, Jesus Manuel; Villanueva, Pedro Perez; Lomeli, Paul; Hung, Wayne NP
title: Flushing Enhancement with Vibration and Pulsed Current in Electrochemical Machining
date: 2017-12-10
pages: 19
extension: .pdf
mime: application/pdf
words: 9709
sentence: 438
flesch: 54
cache: cache/ijemm-30.pdf
txt: txt/ijemm-30.txt
summary:
  The effects of vibration frequency and vibration amplitude on particle average flushing speed were investigated. Workpiece vibration was precisely generated by an electrodynamic shaker (#1).


id: ijemm-36
author: Banu, Asfana; Abu Bakar, Mazilah; Ali, Mohammad Yeakub; Adesta, Erry Y. T.
title: Analysis of WEDM Process Parameters on Surface Roughness and Kerf using Taguchi Method
date: 2017-12-10
pages: 7
extension: .pdf
mime: application/pdf
words: 4092
sentence: 232
flesch: 69
cache: cache/ijemm-36.pdf
txt: txt/ijemm-36.txt
summary:
  The prob>F values less than 0.0500 indicates that the model terms A (voltage open), B (off time), E (voltage gap), AB (voltage open and off time), AC (voltage open and wire speed), BD (off time and wire tension), BE (off time and voltage gap), CD (wire speed and wire tension), CE (wire speed and voltage gap), and DE (wire tension and voltage gap) are significant. Factors C (wire speed) and D (wire tension) are the most uninfluenced factors since their prob>


id: ijemm-109
author: Vannarth, Ram Rohit; Dhake, Raj; Kanna, S. Vishal; Saraf, Safal Sharad
title: Characterisation of Natural Oils as Carrier Fluids for Magnetorheological Fluids
date: 2019-12-11
pages: 6
extension: .pdf
mime: application/pdf
words: 3877
sentence: 206
flesch: 59
cache: cache/ijemm-109.pdf
txt: txt/ijemm-109.txt
summary:
  -10 IS:1448 (Part10) 4 RESULTS AND DISCUSSIONS Referring to Table 1, we can say that the of the four natural carrier oils, Mahua Oil =958.85kg/m3, Groundnut =916.92kg/m3, Flaxseed oil=924.89kg/m3 have lower density compared with traditionally used silicone oil which has a slightly higher density, silicone oil=961.79kg/m3; exception being Simarouba oil which has a higher density than silicone oil. The density of Simarouba Oil is 968.14kg/m3is greater compared to the traditionally used Silicone oil which has density of 961.71 kg/m3, hence the sedimentation stability and yield of Simarouba oil is more.


id: ijemm-248
author: Saleh, Abu; M., Hasanuzzaman; H., Cassidy; S. H., Dayang; M., Shahril
date: 2023-04-01
pages: 15
extension: .pdf
mime: application/pdf
words: 9936
sentence: 514
flesch: 55
cache: cache/ijemm-248.pdf
txt: txt/ijemm-248.txt
title:
  An Exploration of Modified Microwave-assisted Rapid Hydrothermal Liquefaction Process for Conversion of Palm Kernel Shells to Bio-oil

summary:
  Abdullah et al. 2011 35] found the calorific value of bio-oil pyrolysis ranging from 20-26 MJ kg-1. Too high temperature undergoes a secondary stage of pyrolysis that makes condensable volatile convert to non-condensable gasses and decreases pyrolysis oil yield when the temperature of the pyrolysis reaches 550°C


id: ijemm-22
author: Taha, Assem Hatem; Al Hazza, Muataz Hazza Faizi; Adesta, Erry Y. T.
title: Modelling and Analysing Deadlock in Flexible Manufacturing System using Timed Petri Net
date: 2017-03-31
pages: 5
extension: .pdf
mime: application/pdf
words: 3060
sentence: 185
flesch: 61
cache: cache/ijemm-22.pdf
txt: txt/ijemm-22.txt
summary:
  Figure 1: Scenario of manufacturing system Modelling and Analysing Deadlock in Flexible Manufacturing System using Timed Petri Net 14 Analysis of places was obtained and collected in Tables 1. There are three levels of flexibility: basic flexibility, system flexibility and aggregate flexibility.


id: ijemm-19
author: Ullah, Hamid; Ali, Asiyah
title: Design and Development of Mobile Phone Using Quality Function Deployment
date: 2017-03-31
pages: 10
extension: .pdf
mime: application/pdf
words: 4240
sentence: 328
flesch: 57
cache: cache/ijemm-19.pdf
txt: txt/ijemm-19.txt
summary:
  It uses planning matrices that connect customer requirements, design and target specifications, and competitive performance into one graph. These include customer wants, customer preferences, customer choices, customer wishes, customer expectations, and customer requirements.


id: ijemm-203
author: De Oliveira, Deborah; Gomes, Milla Caroline; dos Santos, Aline Gonçalves; Da Silva, Marcio Bacci
title: Influence of Cutting Fluid Application Frequency in Micromilling Cutting Forces
date: 2021-07-15
pages: 7
extension: .pdf
mime: application/pdf
words: 3422
sentence: 212
flesch: 54
cache: cache/ijemm-203.pdf
txt: txt/ijemm-203.txt
summary:
  Keywords: Micromilling, Inconel 718, Cutting fluid, Cutting forces. The results showed that the higher flow of the cutting fluid provided lower cutting forces and that, in dry machining, the cutting force increased significantly during the machining of a slot.


id: ijemm-28
author: Hasan, Muhammad Hasibul; Ahmed, Shugata
date: 2017-09-14
pages: 12
extension: .pdf
mime: application/pdf
words: 4158
sentence: 290
flesch: 63
cache: cache/ijemm-28.pdf
txt: txt/ijemm-28.txt
title:
  Wear Resistance Performance of Conventional and Non-Conventional Wind Turbine Blades with TiN Nano-Coating

summary:
  [14] to investigate erosion on wind turbine blade for insects and sand particles impact. An effective way to prevent erosion on wind turbine blade is to provide coating.


id: ijemm-225
author: Ali, Mohammad Yeakub; Abdul, Md Mazid ; Sabur, Abdus; Rahman, Mohamed
title: Comparative Study of Material Removal Rate of Single-Spark And Multi-Spark Micro-EDM of Copper
date: 2022-04-15
pages: 7
extension: .pdf
mime: application/pdf
words: 4071
sentence: 250
flesch: 61
cache: cache/ijemm-225.pdf
txt: txt/ijemm-225.txt
summary:
  The main process characteristics of micro-EDM are material removal rate (MRR), average surface roughness and tool wear ratio. A number of analytical study have been reported for the estimation of micro-EDM characteristics [11] which are developed based on amount of material removed in a single spark considering the ideal situations.


id: ijemm-230
author: Abedin, Mohammad Zoynal; Karim, A S M Luthful
date: 2022-07-20
pages: 11
extension: .pdf
mime: application/pdf
words: 5374
sentence: 289
flesch: 53
cache: cache/ijemm-230.pdf
txt: txt/ijemm-230.txt
title:
  Waste to Energy Technologies for Municipal Solid Waste Management in Bangladesh: A Comprehensive Review 

summary:
  This study emphasizes on solid waste management of Chattogram city and its best application by considering energy production, cost aspect and impact on the environment. 6 CONCLUSIONS The analysis of solid waste management (MSW) for the energy production by using waste to energy technologies (WTE) has been reviewed for Bangladesh perspective in this paper.


id: ijemm-170
author: Barragan, German; Mariani, Fabio; Coelho, Reginaldo
title: Ti6Al4V Thin Walls Production using Laser Directed Energy Deposition (L-DED) Process
date: 2021-07-15
pages: 8
extension: .pdf
mime: application/pdf
words: 2906
sentence: 204
flesch: 55
cache: cache/ijemm-170.pdf
txt: txt/ijemm-170.txt
summary:
  Thin wall structures comprise an important and growing proportion of engineering construction with some applications on aircraft, automobiles, turbomachinery, bridges, and machine elements where important benefits in terms of weigh reduction could be achieved [4]. The use of the DED process for manufacturing thin walls with Ti6Al4V showed to be feasibly and presented good results, in terms of shape and geometry of the specimens. 2.


id: ijemm-122
author: Al Hazza, Muataz; Muhammad, Khadijah
title: Flank Wear Modelling in High Speed Hard Milling of AISI D2 Steel
date: 2020-06-25
pages: 5
extension: .pdf
mime: application/pdf
words: 2296
sentence: 145
flesch: 64
cache: cache/ijemm-122.pdf
txt: txt/ijemm-122.txt
summary:
  On the other hand, high speed machining is not the same for all materials, high speed for one material is not considered a high speed for others. Keywords: AISI D2, High speed hard milling, Taguchi, Flank wear 1 INTRODUCTION High speed hard milling (HSHM) is an advanced machining processes in industry that merges three advanced machining processes: high speed milling, hard milling, and dry milling [1].


id: ijemm-117
author: Ajiboye, Tajudeen; Abdulsalam, Adam Olalekan
date: 2019-12-15
pages: 8
extension: .pdf
mime: application/pdf
words: 4183
sentence: 193
flesch: 57
cache: cache/ijemm-117.pdf
txt: txt/ijemm-117.txt
title:
  Mechanical Characteristics of Heat-Treated Medium Carbon Steel Quenched using Blending Different Types of Vegetable Oils

summary:
  Figure 6: Izod Impact Machine Figure 7: Impact test sample with notch BLEND A 4.9 7 20 - 0.77 2 BLEND B 4.9 - - - 1.06 Table 4: Hardness value of samples S/N Samples Average Hardness (HRA) 1 2 BLEND A BLEND B 45.7 54.3 151 Ajiboye and Abdulsalam (2019): International Journal of Engineering Materials and Manufacture, 4(4), 146-153 Table 5: Impact energy of the samples S/N Sample Diameter (mm) Notch Energy (J) 1 2 BLEND A BLEND B 12.5 12.5 11.5 11.5 62.34 73.21 Figure 11: Microstructure of the sample quenched in 500 ml of cottonseed oil and 500 ml of neem seed oil (X400) Figure 12: Microstructure of the sample quenched in 250 m1 of cottonseed oil, 250 ml of neem seed oil, 250ml of Palm kernel oil and 250ml of shea butter oil (X400) From the result obtained, Blend A has a lower viscosity, acidic value and flash point compare to Blend B, while Blend A has a higher iodine value than Blend B.


id: ijemm-223
author: Diyah Dewanti, Beauty Suestining ; Adesta, Erry Yulian T.; Ismail, Ahmad Faris
title: Conduction Heat Transfer on the Porous Media in the Gap with Heater from Below
date: 2022-04-15
pages: 8
extension: .pdf
mime: application/pdf
words: 3064
sentence: 194
flesch: 58
cache: cache/ijemm-223.pdf
txt: txt/ijemm-223.txt
summary:
  This study aims to determine the mechanism and calculate conduction heat transfer in porous objects and whether there is a change in the thermal conductivity value. Porous objects contain water that can evaporate.


id: ijemm-179
author: Zohra, Fatema; Akanda, Muzaffer; Asiabanpour, Bahram
date: 2021-07-15
pages: 7
extension: .pdf
mime: application/pdf
words: 3190
sentence: 185
flesch: 50
cache: cache/ijemm-179.pdf
txt: txt/ijemm-179.txt
title:
  The Effect of Macroscopic and Microscopic Patterns of Stainless Steel Surface on the Efficiency of Dropwise Condensation and Precipitation

summary:
  The factors that affect this condensation process are many, such as surrounding temperature and relative humidity, surface property (surface energy, contact angles), angle of tilt of the surface relative to gravity, surface chemistry, groove geometry to aid the droplet motion (3), etc. Marmur A. Wetting on hydrophobic rough surfaces: To be heterogeneous or not to be?


id: ijemm-241
author: Nur Salam, Md; Farhan Hasan, Mohammad; Rokonuzzaman, Md; A Rahman, Md
date: 2022-10-25
pages: 8
extension: .pdf
mime: application/pdf
words: 4709
sentence: 256
flesch: 58
cache: cache/ijemm-241.pdf
txt: txt/ijemm-241.txt
title:
  An Analysis of Water Characteristics of Shiddhirganj 210MW Steam Power Plant, Sirajganj 225MW Combined Cycle Power Plants and Rooppur 2400MW Nuclear Power Plant in Bangladesh: A Comparative Study of Power Plant Grade Water

summary:
  To analyze the water characteristics, water samples were collected from various sources. This can be one of the reasons why iron was obtained at the highest levels in water samples especially.


id: ijemm-247
author: S. A. R., Sharifah Nadhirah; Ali, Jaffar Syed Mohammed; M. S. I. , Shaik Dawood; R., Adib Hamdani
title: Influence of Composite Skin on the Energy Absorption Characteristics of an Aircraft Fuselage
date: 2023-01-20
pages: 8
extension: .pdf
mime: application/pdf
words: 2964
sentence: 173
flesch: 50
cache: cache/ijemm-247.pdf
txt: txt/ijemm-247.txt
summary:
  Hence, the damages on composite fuselage are greater than the aluminium ones. Crashworthiness study of composite fuselage section.


id: ijemm-195
author: Abidah , N.; Al Hazza, Muataz
title: Influence of Buffer Size change in Critical Chain Scheduling: Case Study
date: 2021-04-15
pages: 7
extension: .pdf
mime: application/pdf
words: 2900
sentence: 164
flesch: 56
cache: cache/ijemm-195.pdf
txt: txt/ijemm-195.txt
summary:
  From the result got, for project buffer in adaptive approach with network density method yields a larger buffer size compared to the adaptive procedure with resource tightness method. Project buffer is the time buffer added to the end of the chain to protect project delivery time.


id: ijemm-190
author: Ochuokpa, Ezekiel Otor; Sumaila, D. S.; Adebisi, Abdulmumin
date: 2021-07-15
pages: 11
extension: .pdf
mime: application/pdf
words: 5537
sentence: 291
flesch: 57
cache: cache/ijemm-190.pdf
txt: txt/ijemm-190.txt
title:
  Development of Aluminium Based Mango Seed Mangiferaindica Shell Ash (MSSA) Particulate Metal Matrix Composite

summary:
  Agricultural waste products such as Mellon shell, eggshell, sugarcane, bagasse, rice husk, coconut shell, bamboo leaf, ground nutshell and other organic waste have been successfully used for Aluminium alloy particulate composite reinforcement This research therefore provides pioneering knowledge on the possibility of using mango seed shell as reinforcement for aluminium matrix composites (AMCs) for production of automobile component and other engineering applications.


id: ijemm-206
author: Taiga, Sato; Bakibillah, A.S.M.; Hashikura, Kotaro; Samad Kamal, Md Abdus; Yamada, Kou
title: A User-Oriented Adaptive-Optimal Car Parking Management System Towards Smart Livings
date: 2021-07-15
pages: 7
extension: .pdf
mime: application/pdf
words: 4135
sentence: 209
flesch: 59
cache: cache/ijemm-206.pdf
txt: txt/ijemm-206.txt
summary:
  In [10], an automated thresholding algorithm-based approach for detecting car parking lots is proposed. Keywords: Smart car parking, Cloud computing, Adaptive optimization, Dynamic parking allocation, Smart livings.


id: ijemm-38
author: Yong, Ah Pis; Islam, Md. Aminul; Hasan, Nurul
title: The Effect of pH and High-Pressure Homogenization on Droplet Size
date: 2017-12-10
pages: 13
extension: .pdf
mime: application/pdf
words: 7340
sentence: 440
flesch: 65
cache: cache/ijemm-38.pdf
txt: txt/ijemm-38.txt
summary:
  γµ (A log( )+B)=e (7) ( ) ( ) ( )2 3d =a+b +c +dH H Hi p p p (8) 3 RESULTS AND DISCUSSIONS Figure 1 shows emulsion droplet size with pressure for four emulsions, namely, chocolate, vanilla, MDS and Basil oil studied by [5, 12, 23]. A relationship is developed between emulsion size and pH. Results clearly show that lower pH offers smaller droplet of emulsion and the opposite occurs when the pH is increased.


id: ijemm-115
title: Strengthening of Traditional Mud Houses on Response to Earthquake
date: 2019-12-11
pages: 10
extension: .pdf
mime: application/pdf
words: 4360
sentence: 300
flesch: 57
cache: cache/ijemm-115.pdf
txt: txt/ijemm-115.txt
author:
  Awall, Dr. Md Robiul; Azad, Md Samdani; Md Oli-Ur-Rahman; Sarker, Sajib;  Azad, Gazi Md Sharfaraz Imam

summary:
  The output from analyses includes lateral displacements, frequency, time-dependent displacements and time-dependent acceleration which depict the positive behaviour of reinforced mud houses. Keywords: Mud house, Timber, STAAD.


id: ijemm-40
author: Hossain, Md. Rahat; Ali, Md. Hasan; Amin, Md. Al; Kibria, Md. Golam; Ferdous, Md. Shafiul
date: 2017-12-10
pages: 9
extension: .pdf
mime: application/pdf
words: 4151
sentence: 228
flesch: 51
cache: cache/ijemm-40.pdf
txt: txt/ijemm-40.txt
title:
  Fabrication and Performance Test of Aluminium Alloy-Rice Husk Ash Hybrid Metal Matrix Composite as Industrial and Construction Material

summary:
  It could be a great opportunity in the light industrial sectors and construction area to use aluminium alloy and rice husk ash hybrid composites with some improved mechanical properties comparing with the pure aluminium alloy. In this present study, aluminium matrix composites (AMCs) such as aluminium alloy (A356) reinforced with rice husk ash particles (RHA) are made to explore the possibilities of reinforcing aluminium alloy.


id: ijemm-237
author: Abdullahi, Umma
date: 2022-10-25
pages: 6
extension: .pdf
mime: application/pdf
words: 3070
sentence: 213
flesch: 62
cache: cache/ijemm-237.pdf
txt: txt/ijemm-237.txt
title:
  Effect of Tempering Treatment on the Post-Weld Properties and Chemical Compositions of Arc-Welded Alloy Steels

summary:
  Hardness tests chemical composition analysis were carried out and it was observed that, high carbon steel has the highest hardness of about 459 on maximum HV value, followed by the low carbon steel with the hardness of 316HV maximum and medium carbon experience the least value of 208HV. Abdullahi (2022): International Journal of Engineering Materials and Manufacture, 7(4), 89-94 92 Figure 3: Optical micrograph of high carbon steel at (a) lower


id: ijemm-174
author: D. S. Guterres, Natalino Fonseca; Rusnaldy; Widodo, Achmad; Syamsudin, Arif
date: 2021-07-15
pages: 11
extension: .pdf
mime: application/pdf
words: 6750
sentence: 411
flesch: 60
cache: cache/ijemm-174.pdf
txt: txt/ijemm-174.txt
title:
  Investigate Temperature Preheating on the Chill Plate to Identify Surface Characteristic on the Ductile Iron by Sand Casting

summary:
  5 CONCLUSIONS This research described investigations related to variations in preheating temperature on chill plates against hardness values, surface layer thickness, and chemical diffusion on ductile cast iron surfaces. An atom's mobility on a surface depends on its energy, atom-surface interactions (chemical bonding), and surface temperature [21, 22].


id: ijemm-110
author: Mazid, Abdul Md ; Hasan, Md. Shahanur; Ahsan, Kazi Badrul
date: 2019-12-11
pages: 9
extension: .pdf
mime: application/pdf
words: 7291
sentence: 261
flesch: 49
cache: cache/ijemm-110.pdf
txt: txt/ijemm-110.txt
title:
  An Investigation on Optimum Process Parameters in Terms of Surface Roughness for Turning Titanium Alloy Ti-6Al-4V Using Coated Carbide

summary:
  A series of real-life experimental investigations was carried out to reveal the economic optimal zones of machining parameters that can produce the best possible surface roughness in machining Ti-6Al-4V alloy, using the coated carbide cutting tools, in shortest period of operation time. In relation to depth of cut (d) variation while keeping the cutting speeds and feed rates as constants, the surface roughness obtained in machining Ti-6Al-4V alloy, as depicted in graphs of Figure 7, using coated carbide cutting tools with several investigated nose radii, exhibited similar nature as the depth of cut.


id: ijemm-104
author: Almutairi, Abdullah; Ali, Mohammad Yeakub; Che Daud, Mohd. Radzi
title: Solar Electrification for Desert: A Case of Kuwait
date: 2019-09-18
pages: 9
extension: .pdf
mime: application/pdf
words: 5444
sentence: 280
flesch: 54
cache: cache/ijemm-104.pdf
txt: txt/ijemm-104.txt
summary:
  Keywords: Eco-tourism, Renewable energy, Solar energy, Photovoltaic cell, Off-grid, Shagaya, Kuwait 1 INTRODUCTION Eco-tourism during winter in Kuwait is a cultural and unavoidable event where urban electricity connections are not possible (Mahgoub, 2007). Solar energy, a kind of renewable energy, has become an important subject of energy research.


id: ijemm-218
author: Alam, Md. Jahangir; Dewan, Mohammad Washim; Paul, Sojib Kummer; Sharmin, Khurshida
date: 2022-01-01
pages: 12
extension: .pdf
mime: application/pdf
words: 4920
sentence: 294
flesch: 51
cache: cache/ijemm-218.pdf
txt: txt/ijemm-218.txt
title:
  Investigation of Jute and Glass Fibre Reinforced Hybrid Composites Manufactured through Compression Molding Process

summary:
  Then again only jute fibre reinforced composite panels have lowest tensile and flexural properties and highest water absorption as compared to other fabricated samples. However, natural fibre reinforced composites properties can be extended by hybridization with synthetic fibres and can provide a sustainable alternative to existing engineering materials in many structural applications.


id: ijemm-119
author: Rakib Uddin, Mohammad; Haji Ya’akub, Muhammad Faiz
title: Parked Car Interior Temperature Investigation in Brunei Darussalam
date: 2020-03-26
pages: 7
extension: .pdf
mime: application/pdf
words: 3513
sentence: 175
flesch: 58
cache: cache/ijemm-119.pdf
txt: txt/ijemm-119.txt
summary:
  Keywords: Car interior air temperature; ambient temperature; thermal discomfort 1 INTRODUCTION Prolong exposure to sunlight can significantly increase the temperature inside a parked car when the car’s engine is off. The main purpose of this investigation is to find out the variation of interior air temperature in relation to the ambient temperature with respect to time.


id: ijemm-208
author: Mohammad Saufi, Anis Syufina ; Singh, Ramesh; Lee, K. Y. Sara; Wu, Tao
date: 2021-10-01
pages: 6
extension: .pdf
mime: application/pdf
words: 2880
sentence: 142
flesch: 55
cache: cache/ijemm-208.pdf
txt: txt/ijemm-208.txt
title:
  Densification and Mechanical Properties of Alumina Ceramics via Two-Step Sintering With Different Holding Times 

summary:
  All the conventional and two-step sintered samples exhibited highly crystalline structures, regardless of the sintering holding time up to 24 h. The relative density and grain size of sintered alumina with different sintering holding time are presented in Figure 2. Key: CS – conventional sintering, TSS – two-step sintering Anis et al. (2021): International Journal of Engineering Materials and Manufacture, 6(4), 299-304 302 Figure 3: The grain size as a function of relative density for two-step sintered alumina Figure 4: SEM micrograph of sintered alumina: (a) CS, (b) TSS3, (c) TSS5, (d)


id: ijemm-51
author: Abdullahi, Umma; Maleque, Md. Abdul; Ali, Mohammad Yeakub
date: 2018-03-30
pages: 5
extension: .pdf
mime: application/pdf
words: 2165
sentence: 108
flesch: 46
cache: cache/ijemm-51.pdf
txt: txt/ijemm-51.txt
title:
  Characterization of Carbon Nanotube Reinforced Aluminium Nano-composite using Field Emission Scanning Electron Microscope

summary:
  3 shows the microstructure of 1.5 wt% CNT at 250 rpm for different ball milling time. (a) (b) (c) Figure 2: Microstructure of 1 wt% of CNT at 250 rpm for different ball milling time.


id: ijemm-189
author: Adebisi, Abdulmumin; Mojisola, Tajudeen ; Shehu, Umar; Sani Adam, Muhammed; Abdulaziz, Yusuf
date: 2021-10-01
pages: 7
extension: .pdf
mime: application/pdf
words: 3866
sentence: 211
flesch: 56
cache: cache/ijemm-189.pdf
txt: txt/ijemm-189.txt
title:
  In-Situ Synthesis and Property Evaluation of High-Density Polyethylene Reinforced Groundnut Shell Particulate Composite

summary:
  The easy availability and presence of cellulose imparts good mechanical properties to natural fibres which makes it viable for promoting natural fibre reinforced polymer composites. The Author(s) Creative Commons: CC BY 4.0 ABSTRACT In-situ synthesis of high-density polyethylene (HDPE) reinforced groundnut shell particulate (GSP) composite with treated GSP within the range of 10-30 wt% at 10 wt% has been achieved.


id: ijemm-31
author: Eshtayeh, Mohanna; Hrairi, Meftah; Dawood, M.S.I Shaik
title: Numerical Investigation of Springback in Mechanical Clinching Process
date: 2017-12-10
pages: 8
extension: .pdf
mime: application/pdf
words: 3194
sentence: 136
flesch: 49
cache: cache/ijemm-31.pdf
txt: txt/ijemm-31.txt
summary:
  (a) Equivalent Plastic Strain in Upper Sheet (Steel with higher strength than lower sheet) (b) Equivalent Plastic Strain in Lower sheet (Aluminum with lower strength than upper steel sheet) Figure 3: The Equivalent Plastic Strain in upper and lower sheets in the clinching joints with different yield strength Once the punch moves downward in contact with the upper steel sheet surface, the deformation induced in the surface of the upper blank metal progressively fills the die groove. Hence, the development of stress starts to progress along the bottom thickness of the upper steel sheet (1.05 GPa) and with a lesser degree in the lower aluminium sheet (0.8283 GPa) as can be seen in Figure 1b and Figure 2. (a) Von Mises Stress for upper sheet (Steel) 1.05 GPa (b)


id: ijemm-26
author: Rahman, Mohamed; Jasani, Abdul Aziz; Ibrahim, Mohd Azizuddin
date: 2017-07-01
pages: 6
extension: .pdf
mime: application/pdf
words: 2963
sentence: 166
flesch: 49
cache: cache/ijemm-26.pdf
txt: txt/ijemm-26.txt
title:
  Flexural Strength of Banana Fibre Reinforced Epoxy Composites Produced through Vacuum Infusion and Hand Lay-Up Techniques - A Comparative Study

summary:
  In a few studies, banana fibres were used to reinforce epoxy while studying effect of fibre length and optimum fibre loading [5 - 7]. Especially there was little if any on banana fibre reinforced epoxy composites made by using vacuum infusion and comparison of the resultant properties with those produced using hand layup process.


id: ijemm-12
author: Konneh, Mohamed
title: Precision Surface Grinding of Silicon Carbide
date: 2016-12-19
pages: 8
extension: .pdf
mime: application/pdf
words: 2790
sentence: 138
flesch: 58
cache: cache/ijemm-12.pdf
txt: txt/ijemm-12.txt
summary:
  A mathematical model has been developed for predicting surface roughness values within the limits of the machining parameters that has been tested. Keywords: Silicon carbide, surface grinding, cup wheel, diamond grits, surface roughness and morphology.


id: ijemm-49
author: Ali, Mohammad Yeakub; Sabur, Abdus; Banu, Asfana; Maleque, Md. Abdul; Adesta, Erry YT
title: Micro Electro Discharge Machining for Nonconductive Ceramic Materials
date: 2018-03-30
pages: 8
extension: .pdf
mime: application/pdf
words: 4123
sentence: 240
flesch: 49
cache: cache/ijemm-49.pdf
txt: txt/ijemm-49.txt
summary:
  Keywords: Micro-EDM, Nonconductive ceramics, assisting electrode, MRR 1 INTRODUCTION Advancement in technology has opened the windows of some special materials to meet particular requirements by means of miniaturization. 1.2 Micro-electro Discharge Machining Micro-electro discharge machining (Micro-EDM) is an electro-thermal material removal process which is used for manufacturing three-dimensional micro-components.


id: ijemm-139
author: Agboola, Joseph; Anyoku, Emmanuel ; Oladoye, Atinuke
date: 2021-01-30
pages: 7
extension: .pdf
mime: application/pdf
words: 3055
sentence: 191
flesch: 53
cache: cache/ijemm-139.pdf
txt: txt/ijemm-139.txt
title:
  Effects of Cooling Rate on the Microstructure, Mechanical Properties and Corrosion Resistance of 6xxx Aluminium Alloy

summary:
  Effects of Cooling Rate on the Microstructure, Mechanical Properties and Corrosion Resistance of 6xxx Aluminium Alloy. Effects of Cooling Rate on the Microstructure, Mechanical Properties and Corrosion Resistance of 6xxx Aluminium Alloy Joseph B. Agboola, Emmanuel S. Anyoku, Atinuke M. Oladoye Received: 14 September 2020 Accepted: 07 January 2021 Published: 30 January 2021 Publisher: Deer Hill Publications © 2021


id: ijemm-125
author: Abdulkareem, Sulaiman; Busari, Ridwan; Fashola, Lateef; Madu, Ikechukwu
title: Characteristics of Notched High Strength Materials Under Tension, Torsion and Impact Loading.
date: 2020-08-22
pages: 8
extension: .pdf
mime: application/pdf
words: 3765
sentence: 214
flesch: 62
cache: cache/ijemm-125.pdf
txt: txt/ijemm-125.txt
summary:
  High notch tip radius of the samples improves the absorption energy of the steel samples. Furthermore, the 60 o and 1.0 mm notch parameters which give high notch angles and tips radius have the high absorption energy due to the fact that the sample has more area at the root tip which is likely not be easy for crack to be initiated and when eventually it is initiated, the crack will cover a large area before the material is fracture, hence results in higher absorbed energy.


id: ijemm-65
author: Rashid, Muhammad Mahbubur; Mamun, Abdullah Al; Jaafar, Abdul Hassan; Mollik, Md. Sajib
title: Development of Non-Contact Liquid Level Measurement and Data Storage System
date: 2018-09-10
pages: 9
extension: .pdf
mime: application/pdf
words: 2853
sentence: 168
flesch: 59
cache: cache/ijemm-65.pdf
txt: txt/ijemm-65.txt
summary:
  Especially flash flood may cause the damage of liquid level sensor. Liquid level sensors and data logger testing and demonstration, Irrigation Training and Research Centre, California Polytecnic State University, San Luis Obispo.


id: ijemm-144
title: Use of Keratin Present in Chicken feather as a Hydrogen Storage Material: A Review
date: 2020-10-20
pages: 8
extension: .pdf
mime: application/pdf
words: 3472
sentence: 211
flesch: 65
cache: cache/ijemm-144.pdf
txt: txt/ijemm-144.txt
author:
  Madathil, Akhil Punneri; Achar, Siddarth Krishnaraja; Moses, Vinutha ; Meda, Ujwal Shreenag; Chetan, N; Vidya, C; Raj, Lourdu Antony; Sarode, Manjula

summary:
  Materials such as chicken feathers can be used as a medium to store hydrogen. Several research studies are reviewed where chicken feathers are thermally treated by the method of pyrolysis to make them a novel material for hydrogen storage.


id: ijemm-57
author: Jamil Hosni, Nor Ain Binti; Lajis, Mohd Amri Bin; Idris, Muhammad Ridzuan Bin
date: 2018-06-08
pages: 9
extension: .pdf
mime: application/pdf
words: 3360
sentence: 154
flesch: 50
cache: cache/ijemm-57.pdf
txt: txt/ijemm-57.txt
title:
  Modelling and optimization of Chromium Powder Mixed EDM Parameter Effect Over the Surface Characteristics by Response Surface Methodology Approach

summary:
  Therefore, analysis of variance (ANOVA) is done towards response surface quadratic model for recast layer. In the same manner, the main effect of discharge current (A), pulse on time (B), the second-order effect of pulse on time (B2) and the second-order effect of powder concentration (C2) are significant model terms.


id: ijemm-60
author: Abd Rashid, Siti Munirah Salimah; Anuar, Hazleen; Mohd Apandi, Siti Nur E'zzati; Buys, Yose Fachmi
title: Effect of UV Radiation on Degradation of Durian Skin Fibre Composite
date: 2018-06-04
pages: 8
extension: .pdf
mime: application/pdf
words: 3843
sentence: 221
flesch: 58
cache: cache/ijemm-60.pdf
txt: txt/ijemm-60.txt
summary:
  Durian peels fiber and recycled HDPE composites obtained by extrusion. The tensile strength of DSF composite was higher in the presence of MAPE because the interaction between filler and matrix became stronger [8,9].


id: ijemm-136
author: Islam, Saiful
title: Enhanced Information System Security in Internet Banking and Manufacturing
date: 2020-06-25
pages: 6
extension: .pdf
mime: application/pdf
words: 4259
sentence: 244
flesch: 44
cache: cache/ijemm-136.pdf
txt: txt/ijemm-136.txt
summary:
  2 AN OVERVIEW OF INTERNET BANKING According to Shaikh and Karjaluoto (2018), internet banking is a connection of banking systems that enable customers to get access to their bank accounts and other important banking details through the use of a website and without the inconvenience of attending physically to the bank, sending faxes, letters, or telephone confirmations. The challenges that internet banking is facing are providing information system security and protecting privacy of information.


id: ijemm-253
author: Zakaria Al-Hady, Syed Mohammed; Islam, Md Rafiqul; Rashid, Muhammad Mahbubur
date: 2023-07-01
pages: 13
extension: .pdf
mime: application/pdf
words: 5098
sentence: 291
flesch: 55
cache: cache/ijemm-253.pdf
txt: txt/ijemm-253.txt
title:
  Development of IoT-Based Automated Dynamic Emergency Response System Against Fire Incidents in Academic Building

summary:
  Study on fire evacuation path based on Bluetooth and smoke sensors. This dynamic path analysis of the escape path for complex building fires can be realized and displayed in the BIM model, which helps trapped people escape quickly.


id: ijemm-53
date: 2018-06-04
pages: 11
extension: .pdf
mime: application/pdf
words: 5439
sentence: 330
flesch: 54
cache: cache/ijemm-53.pdf
txt: txt/ijemm-53.txt
author:
  Suffian, Syakira Afiqah; Sidek, Atiah Abdullah; Matsuto, Toshihiko; Al Hazza, Muataz Hazza; Yusof, Hazlina Md; Hashim, Abdullah Zawawi

title:
  Greenhouse Gas Emission of Broiler Chicken Production in Malaysia using Life Cycle Assessment Guidelines: A Case Study

summary:
  Keywords: Greenhouse gas emission, broiler chicken production, Life cycle assessment. Figure 1 shows the statistic of broiler chicken production in Malaysia from 2004 to 2017.


id: ijemm-166
author: Ogedengbe, Temitayo Samson; Sulaiman, Abdulkareem; Olanrewaju Peter, Ogunware
date: 2021-10-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3371
sentence: 138
flesch: 52
cache: cache/ijemm-166.pdf
txt: txt/ijemm-166.txt
title:
  Experimental Investigation on the Effects of Various Quenchants on Hardened High Carbon Steels during Lathe Machining

summary:
  Steel samples quenched with brine and palm-oil were found to have hardness values of 210 HRB and 150 HRB, respectively. The highest surface roughness values were recorded for pure water which is understandable due to the higher hardness value results obtained from the hardness test, Post Machining minimum and maximum values of 0.401.1 and 2.31μm were recorded for the steel sample quenched with pure water as compared with steel samples quenched with palm-oil and brine that recorded lower surfaces roughness values of 0.09, 0.07 & 0.12 μm and 0.20, 0.49 & 0.60 μm for minimum, medium and maximum values respectively.


id: ijemm-9
author: Adebisi, Adetayo Abdulmumin; Maleque, Md Abdul; Ndaliman, Mohammed Baba
title: Influence of Stirring Speed on Microstructure and Wear Morphology of SiCp-6061Al Composite
date: 2016-09-30
pages: 6
extension: .pdf
mime: application/pdf
words: 2883
sentence: 156
flesch: 48
cache: cache/ijemm-9.pdf
txt: txt/ijemm-9.txt
summary:
  The use of fluid with viscosity similar to reinforced SiCp aluminium composite was used in the simulation of the mixtures with various stirring speed. Figure 4: Microstructure of 15 wt% SiCp Al composite processed at (a) 300 rpm (b) 500 rpm and (c) 700 rpm.


id: ijemm-92
date: 2019-06-15
pages: 7
extension: .pdf
mime: application/pdf
words: 3517
sentence: 205
flesch: 61
cache: cache/ijemm-92.pdf
txt: txt/ijemm-92.txt
author:
  Sulaiman, Abdulkareem; Timothy Adeniyi, Adekanye; Abdulbaqi Toyin, Abdulrahim; Yusu Lanre, Shuaib-Babata; Tajudeen Kolawole, Ajiboye;  Ismail Idowu, Ahmed; Ibrahim, Hassan Kobe; Jeleel Adekunle, Adebisi; Taiwo, Yahaya

title:
  Hardness and Tensile Properties of Prophylactic Knee Brace Produced from Cow Bone and Periwinkle Shell Composites

summary:
  The same procedure was adopted for the casting of Cb aluminium composite with addition of 0.5 wt% Mg for good wettability of particles with molten metal [21]. The reduction in density of the cast Pkb was more significant in Ps composites compared to that of Cb composites.


id: ijemm-44
author: Rahman, A.N.M. Masudur; Alimuzzaman, Shah; Khan, Ruhul Amin; Khan, Md. Ershad; Hoque, Sheikh Nazmul
date: 2018-03-30
pages: 14
extension: .pdf
mime: application/pdf
words: 6297
sentence: 368
flesch: 51
cache: cache/ijemm-44.pdf
txt: txt/ijemm-44.txt
title:
  Fabrication, Mechanical Characterization and Interfacial Properties of Okra Fiber Reinforced Polypropylene Composites

summary:
  1 INTRODUCTION Recently, fiber reinforced composites have appealed huge consideration in the arena of engineering applications because of their excellent and unique combination of physical and mechanical properties. For treated fiber composites that values were observed to be 38.5 MPa, 72.5 MPa and 22.87 KJ/m 2 respectively.


id: ijemm-156
author: Rahman, Md. Mostaqur
title: Generation of Electricity by Microbial Fuel Cells using Industrial Effluent
date: 2021-01-30
pages: 12
extension: .pdf
mime: application/pdf
words: 5440
sentence: 273
flesch: 63
cache: cache/ijemm-156.pdf
txt: txt/ijemm-156.txt
summary:
  Microbial fuel cell (MFC) is a green energy technology which used for electricity generation, wastewater treatment, bioremediation, biosensors hydrogen production[3] and biological oxygen demand (BOD) sensors[4]. [2] Choudhury P, Prasad Uday U S, Bandyopadhyay T K, Ray R N and Bhunia B 2017 Performance improvement of microbial fuel cell (MFC) using suitable electrode and Bioengineered organisms: A review Bioengineered 8 471–87


id: ijemm-251
author: Hazra, Mrityunjoy; Singh, Ashok Kumar
date: 2023-07-01
pages: 16
extension: .pdf
mime: application/pdf
words: 6794
sentence: 345
flesch: 51
cache: cache/ijemm-251.pdf
txt: txt/ijemm-251.txt
title:
  Failure Investigation on Failed Towing Arm of an Aircraft: A Case of Improper Material Processing and Failed Repair Welding of a Cast Al-Cu-Si Type Aluminium Alloy

summary:
  Table 1: Chemical compositions of failed towing arm and towing pin as obtained by XRF and EDS techniques. Keywords: Towing arm, cast Al-Cu-Si, repair welding, hot cracking, solidification cracking, liquation cracking, intergranular fracture, Al-Cu-Fe grain boundary precipitates, Al-Fe-Mn grain boundary precipitates.


id: ijemm-47
author: Kothari, Mitul; Hung, Wayne NP
title: Suppressing Aluminum Carbide in Welding Aluminum Silicon Carbide Composite
date: 2018-03-30
pages: 14
extension: .pdf
mime: application/pdf
words: 7669
sentence: 412
flesch: 60
cache: cache/ijemm-47.pdf
txt: txt/ijemm-47.txt
summary:
  This short time duration and low weld temperature did not allow Al4C3 to form in a weld. Figure 5: Finite element simulation of weld pool temperature.


id: ijemm-4
author: Hazza, Muataz; Najwa, Nur Amirah
date: 2016-09-03
pages: 5
extension: .pdf
mime: application/pdf
words: 1995
sentence: 111
flesch: 62
cache: cache/ijemm-4.pdf
txt: txt/ijemm-4.txt
title:
  Optimization of Cutting Parameters to Minimize Tooling Cost in High Speed Turning of SS304 using Coated Carbide Tool using Genetic Algorithm Method

summary:
  Optimization of Cutting Parameters to minimize tooling cost in High Speed Turning of SS304 … 12 2 METHODOLOGY Actually, tooling cost is inversely proportional with tool life and proportional with the machining time Therefore, the tooling cost is calculated based on the work of [4-7].


id: ijemm-71
author: Paul, Akshoy Ranjan; Alam, Firoz
title: Compliance of Boiler Standards and Industrial Safety in Indian Subcontinent
date: 2018-12-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3391
sentence: 181
flesch: 45
cache: cache/ijemm-71.pdf
txt: txt/ijemm-71.txt
summary:
  The fatalities due to boiler explosions are sky rocketing in the Indian subcontinent. Today, boiler explosion is considered one of major threats to the industrial safety.


id: ijemm-27
author: Dalloul, Ahmad; Saleh, Tanveer
title: Concept of a Programmable Fixture for 3-Axis CNC
date: 2017-09-14
pages: 9
extension: .pdf
mime: application/pdf
words: 2556
sentence: 145
flesch: 60
cache: cache/ijemm-27.pdf
txt: txt/ijemm-27.txt
summary:
  The platform also can rotate around all three axes but the needed ones are around X axis and Y axis. +17 (10) The fixture need to rotate around X and Y axis only.


id: ijemm-153
author: Hossain, Shazzad ; Abedin, Mohammad Zoynal
title: Effect of Minimum Quantity Lubrication System for Improving Surface Roughness in Turning Operation
date: 2021-01-30
pages: 10
extension: .pdf
mime: application/pdf
words: 6189
sentence: 305
flesch: 51
cache: cache/ijemm-153.pdf
txt: txt/ijemm-153.txt
summary:
  MQL machining of surface roughness is seen to be significant and optimal when compared with the dry and flooded. When depth of cut is 0.25mm (green colour), MQL system show the excellent result of surface roughness than others two depth of cut.


id: ijemm-168
date: 2021-07-15
pages: 12
extension: .pdf
mime: application/pdf
words: 4906
sentence: 295
flesch: 57
cache: cache/ijemm-168.pdf
txt: txt/ijemm-168.txt
author:
  Johan Sebastian Grass Nuñez, Johan Sebastian Grass Nuñez; Rojas Perilla, Daniel Andres; Barragan de los Rios,  German Alberto; Coelho, Reginaldo Teixeira

title:
  Numerical and Experimental Analysis of Gas Flow in a Coaxial Nozzle Applied to Directed Energy Deposition (DED)

summary:
  An initial set of gas flow was selected, based on previous experience of the manufacturer, and then improved. (13) Bearing that in mind, the present study aims at a numerical analysis of the behaviour of gas flows in a coaxial nozzle applied to DED process.


id: ijemm-98
author: Alazemi, Mohammed; Mohiuddin, AKM
title: Construction Project in Kuwait International Airport Cargo City: Issue of Conflict Management
date: 2019-06-15
pages: 7
extension: .pdf
mime: application/pdf
words: 5202
sentence: 274
flesch: 47
cache: cache/ijemm-98.pdf
txt: txt/ijemm-98.txt
summary:
  Data previously gathered on construction conflict will also be consulted to shore up the primary data that will be collected. Compromised DSS for construction conflict and resolution uncertainty, Journal of Construction Engineering and Management, vol. 136(12)


id: ijemm-81
author: Murthy, Madhav; Babu, Kayala Mallikharjuna; Jebaraj, Peter Martin
date: 2018-12-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3014
sentence: 164
flesch: 54
cache: cache/ijemm-81.pdf
txt: txt/ijemm-81.txt
title:
  Impact of Constraint Conditions and Cutouts on Natural Frequency of Glass Fiber Reinforced Plastic Composite

summary:
  Study on free vibration analysis of rectangular plate structures using finite element method. Semi-analytical modeling of cutouts in rectangular plates with variable thickness– Free vibration analysis.


id: ijemm-94
author: Alazemi, Ahmed S Kh R Q; Ali, Mohammad Yeakub; Daud, Mohd Radzi Che
title: Preventive Maintenance of Boiler: A Case of Kuwait Industry
date: 2019-06-15
pages: 11
extension: .pdf
mime: application/pdf
words: 5240
sentence: 358
flesch: 48
cache: cache/ijemm-94.pdf
txt: txt/ijemm-94.txt
summary:
  Taking a reactive approach in boiler maintenance can be quite costly to the business in terms of boiler downtime, parts and labour costs for repairs, and reduced service life for the boiler. Finally, if boiler maintenance relies on reactive approach, it is almost like inviting a problem and the consequences of a boiler problem can be quite severe (Louis, 2018).


id: ijemm-252
author: Abdullahi, Umma
title: Effects of Alloying Element and Heat Treatment on Mechanical Properties of Alloy Steels
date: 2023-07-01
pages: 8
extension: .pdf
mime: application/pdf
words: 4219
sentence: 273
flesch: 59
cache: cache/ijemm-252.pdf
txt: txt/ijemm-252.txt
summary:
  The researchers in this area assumed the following definition: ‘Carbon steels are regarded as steels containing not more than 0⋅5% manganese and 0⋅5% silicon, all other steels being regarded as alloy steels’ (Material handbook, 1964) . This steel also showed similar austenite grain coarsening behaviour as that of low carbon steel 1.


id: ijemm-83
author: Hasan, Muhammad Hasibul; Soi, Chahat; Mirzajavadkhan, Azin; Rafieian, Saba; Mehany, Mirt
date: 2018-12-01
pages: 13
extension: .pdf
mime: application/pdf
words: 4291
sentence: 243
flesch: 50
cache: cache/ijemm-83.pdf
txt: txt/ijemm-83.txt
title:
  Experimental Study and Computer Simulation of Fracture Toughness of Ni Base Superalloy using CT Specimen

summary:
  An increase in J values was recorded for increasing temperatures [20] as shown in Fig.14. J values for both the alloys show path independency up to 300° C for an insignificant amount of plastic zone at the crack tip.


id: ijemm-76
author: Alrashidi, Abdullah E. M. F.; al Hazza, Muataz Hazza Faizi; Khan, Ahsan Ali
title: The Scenario of Supply Chain Management in Kuwait Food Industry
date: 2018-09-10
pages: 9
extension: .pdf
mime: application/pdf
words: 5417
sentence: 293
flesch: 46
cache: cache/ijemm-76.pdf
txt: txt/ijemm-76.txt
summary:
  Keywords: Supply chain management, Kuwaiti food industry, Quality, Balanced score card, Performance prism 1 INTRODUCTION One of the performance effects commonly known in many organizations is supply chain management (SCM). Two of these variables namely quality and time were accepted as high output of the regression analysis and the regression model for company performance (CP) was presented by Eqn 3.


id: ijemm-130
title: Production of Abrasive Sandpaper using Periwinkle Shells and Crab Shells
date: 2020-06-25
pages: 7
extension: .pdf
mime: application/pdf
words: 4012
sentence: 234
flesch: 57
cache: cache/ijemm-130.pdf
txt: txt/ijemm-130.txt
author:
  SHUAIB-BABATA, YUSUF LANRE; Ambali, Ibrahim Owolabi; Abdulqadir , Lawal Babatunde; Ibrahim, Hassan Kobe; Aremu, Ishaq Na’allah; Ibraheem, Taofeek Olawale

summary:
  Sandpaper consists of abrasive grain material fixed to a flexible backing material by an adhesive [5]. Kishore also worked on the investigation of mechanical properties of crab shell.


id: ijemm-78
author: Alazemi, Saud F. E. M. D.; Hilmy, Irfan; Adesta, Erry Y. T.
title: Indentation Mechanism in Rotary Hammer Forging Process: Analytical and Numerical Approach
date: 2018-12-01
pages: 10
extension: .pdf
mime: application/pdf
words: 5794
sentence: 352
flesch: 56
cache: cache/ijemm-78.pdf
txt: txt/ijemm-78.txt
summary:
  Keywords: Forging, Rotary hammer forging, Indentation mechanism, Conical upper die, Orbital motion 1 INTRODUCTION Rotary Hammer Forging is one type of forging process which is also called as Wobble Die Forging. The objective of this research is to develop a new method as a framework to design forging process as well as die design in a rotary hammer forging.


id: ijemm-140
author: Ahmed, Md. Shamim; Abedin, Mohammad Zoynal
title: Review on Heat Transfer Enhancement by Insert Devices
date: 2020-10-20
pages: 18
extension: .pdf
mime: application/pdf
words: 8287
sentence: 351
flesch: 52
cache: cache/ijemm-140.pdf
txt: txt/ijemm-140.txt
summary:
  As part of heat transfer enhancement, inserts are widely used in pipe flow because it can break the boundary layer and increase the heat transfer rates. There are several types of inserts using for heat transfer enhancement.


id: ijemm-145
author: Hazra, Mrityunjoy; Singh, Ashok Kumar
date: 2021-01-30
pages: 9
extension: .pdf
mime: application/pdf
words: 3399
sentence: 208
flesch: 58
cache: cache/ijemm-145.pdf
txt: txt/ijemm-145.txt
title:
  Failure Analysis of Bolt of Rear Mounting Trunion of an Aero-Engine: A Case of Bending Induced Chevron Pattern as well as Fatigue Failure on the Same Fracture Surface

summary:
  Presence of cadmium on the fracture surfaces, multiple crack initiation sites and numerous well-revealed secondary cracks on Branson cleaned fracture surface indicate that the cracks pre-existed on the material even before the cadmium plating and manifestation of chevron pattern is its extreme revelation. Many small cracks and crack like appearances are observed in the microstructure at periphery of fracture surface.


id: ijemm-58
author: Hasan, Muhammad Hasibul; Ahmed, Shugata; Voldman, Ron; Mehany, Mirt
title: Parametric Effect on Surface Finish of Three-Dimensional Printed Object
date: 2018-06-04
pages: 7
extension: .pdf
mime: application/pdf
words: 3293
sentence: 189
flesch: 59
cache: cache/ijemm-58.pdf
txt: txt/ijemm-58.txt
summary:
  Khan et al. (2006) investigated the emphasis of slice thickness and support parameters on surface roughness — they mentioned that lower slice thickness produces Hasan et al. Meanwhile, sample 4 had the highest value, which were 31.43 µm, 28.49 µm, and the third surface was out of range due to the higher value of surface roughness.


id: ijemm-134
author: Saiphoo, Sabrina N.; Rose, Cassidy M.; Dunn, Alexander T.; Padia, Dwij J.; Hasan, Muhammad Hasibul
title: Comparison of Four Common Gold Nanoparticles for Photothermal Cancer Therapy: A Review
date: 2020-10-20
pages: 14
extension: .pdf
mime: application/pdf
words: 10818
sentence: 806
flesch: 64
cache: cache/ijemm-134.pdf
txt: txt/ijemm-134.txt
summary:
  [29] tested the selective destruction of tumourous tissue using AuNCs by injecting 10 mice with cancer cells (U87wtEGFR) subcutaneously in their right and left ear flanks A key disadvantage for the use of polystyrene latex cores is that their resonances cannot produce sufficient heat to kill cancer cells in tumours [55].


id: ijemm-162
author: Eisenstat, Joshua; Gotthardt, Dennis; Assor, Rebecca; Dempsey, Liam; Hasan, Muhammad Hasibul
title: A Comparative Review of Material Properties for Current and Future Dental Filling Nanomaterials
date: 2021-10-01
pages: 17
extension: .pdf
mime: application/pdf
words: 9370
sentence: 629
flesch: 46
cache: cache/ijemm-162.pdf
txt: txt/ijemm-162.txt
summary:
  7 CONCLUSIONS There has been a great deal of research done regarding dental filling nanomaterials and nanoparticles. The most important properties that were investigated with dental fillings nanomaterials are the resistance to wear, toxicity and the overall biocompatibility of the material.


id: ijemm-85
author: Abbas, Abdalla Abbas Said; Abou-El-Hossein, Khaled
title: Investigation of Drill Bit Temperature during Automatic Bone Drilling
date: 2018-12-01
pages: 6
extension: .pdf
mime: application/pdf
words: 3027
sentence: 169
flesch: 58
cache: cache/ijemm-85.pdf
txt: txt/ijemm-85.txt
summary:
  The increase in bone temperature and the amount of exposure time to the heat are the two factors that determine the damage level of the bone [4]. [8] found that an increase in rotational speed leads to an increase in bone temperature.


id: ijemm-87
author: Ogedengbe, Temitayo Samson
title: Sustainable Machining Processes through Optimization of Process Parameters
date: 2019-03-01
pages: 5
extension: .pdf
mime: application/pdf
words: 2149
sentence: 114
flesch: 48
cache: cache/ijemm-87.pdf
txt: txt/ijemm-87.txt
summary:
  Arif M., Ian A. S. and Olcay A. (2014), A model to determine the optimal parameters in a machining process for the most profitable utilization of machining energy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405414527960 4. Carrying out machining activities with a view to reducing energy consumption will therefore result in a lowered cost of production for manufactured products.


id: ijemm-48
author: Bourini, Islam Faisal; al Hazza, Muataz Hazza Faizi; Taha, Assem Hatem
date: 2018-03-30
pages: 9
extension: .pdf
mime: application/pdf
words: 2969
sentence: 160
flesch: 45
cache: cache/ijemm-48.pdf
txt: txt/ijemm-48.txt
title:
  Investigation of Effect of Machine Layout on Productivity and Utilization Level: What If Simulation Approach

summary:
  The results obtained have been analysed and appraised to induce the bottleneck locations, productivity and utilizations of the machines and material handling systems used in the design system. Finally, the best model have been developed to increase the productivity, utilizations of the machines, material handling systems and to minimize the bottleneck locations.


id: ijemm-128
author: Abutu, Joseph; Lawal, S.A.; Ndaliman, M.B.; Lafia-Araga, R. A.; Oluleye, M. A.
date: 2020-06-25
pages: 10
extension: .pdf
mime: application/pdf
words: 5917
sentence: 202
flesch: 50
cache: cache/ijemm-128.pdf
txt: txt/ijemm-128.txt
title:
  Tribological Properties of Friction Materials Developed from Non- Asbestos Materials using Response Surface Methodology

summary:
   (6) The results of GRG, GRC and grades obtained from GRA are presented in Table 5 and the resulting factor effects of process parameters are shown in Table 6 while the main effect plots for coconut shell and seashell based brake pads are shown in Figure 2 and 3 respectively. Also, alumina and commercial brake sample (Figure 1c) designed for Mazda 323 and produced by Ibeto Group of Companies were sourced from a commercial shop situated in Kaduna-Nigeria while epoxy resin used together with hardener (Sikadur 42T) were purchased from a chemical store located in Onitsha-Nigeria while graphite (Figure 1d) sourced from dry cell batteries (1.5 volt, TIGER).


id: ijemm-7
author: Ali, Mohammad Yeakub
title: Editorial
date: 2016-09-10
pages: 2
extension: .pdf
mime: application/pdf
words: 939
sentence: 39
flesch: 27
cache: cache/ijemm-7.pdf
txt: txt/ijemm-7.txt
summary:
  EDITOR-IN-CHIEF: Professor Dr. Mohammad Yeakub Ali, International Islamic University Malaysia SECTION EDITORS: Professor Dr. Md. Abdul Maleque, International Islamic University Malaysia Professor Dr. Erry Y. T. Adesta, International Islamic University Malaysia Professor Dr. Safian Sharif, Universiti Teknologi Malaysia Professor Dr. Md. International Journal of Engineering Materials and Manufacture (2016) 1(1) 1-2 https://doi.org/10.26776/ijemm.01.01.2016.01 M. Y. Ali Department of Manufacturing and Materials Engineering International Islamic University Malaysia PO Box 10, 50728 Kuala Lumpur, Malaysia E-mail: mmyali@iium.edu.my Reference: Ali, M. Y. (2016).


id: ijemm-6
title: Tensile Properties of Durian Skin Fibre Reinforced Plasticized Polylactic Acid Biocomposites
date: 2016-09-27
pages: 5
extension: .pdf
mime: application/pdf
words: 2207
sentence: 154
flesch: 61
cache: cache/ijemm-6.pdf
txt: txt/ijemm-6.txt
author:
  Anuar, Hazleen; Razali, Mohd Syafiq; Saidin, Hafizul Adzim; Badrul Hisham, Ammelia Fazlina; Mohd Apandi, Siti Nur E’zzati; Ali, Fathilah

summary:
  Scanning electron micrograph revealed that a ductile failure was induced in PLA composite with 5 wt% EPO and 3 wt% DSF. Plasticizers are important agent in the processing of PLA composites.


id: ijemm-25
author: Karim, A. N. Mustfizul; Kays, Emrul; Rosland, Nur Aisyah Akmal Binti; Tuan, Saravanan Tanjong
date: 2017-03-31
pages: 9
extension: .pdf
mime: application/pdf
words: 5127
sentence: 293
flesch: 50
cache: cache/ijemm-25.pdf
txt: txt/ijemm-25.txt
title:
  Gate-to-Gate Life Cycle Assessment for Determining Carbon Footprint of Catalytic Converter Assembly Process

summary:
  Figure 1: Process map of welding operations involved in catalytic converter manufacturing process. Hence, in line with achieving this research goal, in the following subsection a brief literature review on the automotive sectors and LCA process is summarized. 2.1 Automotive Industry in Malaysia The automotive sector has drawn the significant attention in manufacturing sector of Malaysia since the establishment of its two national car manufacturer named as Perusahaan Otomobil Nasional Berhad (also known as Proton) on Gate-to-Gate Life Cycle Assessment for Determining Carbon Footprint of Catalytic Converter Assembly Process 18 May 07, 1983 and Perusahaan Otomobil Kedua Sdn.


id: ijemm-72
author: Manda, Premkumar; Rao, A Sambasiva; Singh, Satyapal; Singh, Ashok Kumar
title: Microstructural Characterization of Failed Aircraft Antenna
date: 2018-12-01
pages: 11
extension: .pdf
mime: application/pdf
words: 4031
sentence: 257
flesch: 65
cache: cache/ijemm-72.pdf
txt: txt/ijemm-72.txt
summary:
  Present work is thus concerned with the failure investigation of damaged aircraft antenna. International Journal of Engineering Materials and Manufacture, 3(4), 171-181 173 2 EXPERIMENTAL Visual examination was carried out on damaged aircraft antenna followed by photography in as-received condition.


id: ijemm-62
author: Abedin, Mohammad Zoynal; Sarkar, M. A. Rashid
date: 2018-09-15
pages: 12
extension: .pdf
mime: application/pdf
words: 6741
sentence: 301
flesch: 61
cache: cache/ijemm-62.pdf
txt: txt/ijemm-62.txt
title:
  Experimental Study of Heat Transfer Enhancement through a Tube with Wire-Coil Inserts at Low Turbulent Reynolds Number

summary:
  Keywords: Heat transfer enhancement, Wire-coil inserts, Low Reynolds number, Friction factor, Effectiveness. Especially, in the processes of industrial applications, heat exchangers are found to be responsible for transferring more than 80% of energy which emphasizes the importance of heat transfer enhancement [2].


id: ijemm-93
date: 2019-06-15
pages: 11
extension: .pdf
mime: application/pdf
words: 5698
sentence: 323
flesch: 53
cache: cache/ijemm-93.pdf
txt: txt/ijemm-93.txt
author:
  SHUAIB-BABATA, YUSUF LANRE; IBRAHIM, KOBE HASSAN; AMBALI, OWOLABI IBRAHIM; YAHYA, ABOLORE RAHEEM; AJAO, SULEIMAN KABIRU; AREMU, ISHAQ NA'ALLAH; PELUMI, ABIBAT ATINUKE

title:
  Inhibitive Potential of Prosopis Africana on Corrosion of Low Carbon Steel in 1M Hydrochloric Acid Medium

summary:
  Shuaib–Babata et al., (2019): International Journal of Engineering Materials and Manufacture, 4(2), 66-76 72 Figure 9: the variation of corrosion rate in Prosopis Africana seed extracts Figure 10: The percentage inhibition efficiency of Prosopis Africana seed extract at different concentrations The variation of corrosion rates within the time of exposure are presented in Figure 9. From the results obtained in Table 3 and 4, high presence of alkaloid (11.70 mg/l), alkaloid (10.60 mg/l) and saponin (108.70 mg/l) in Prosopis Africana seed extract is revealed.


id: ijemm-56
author: Maged, Ahmed; Haridy, Salah; Shamsuzzaman, Mohammad; Alsyouf, Imad; Zaied, Roubi
date: 2018-06-04
pages: 10
extension: .pdf
mime: application/pdf
words: 4962
sentence: 299
flesch: 56
cache: cache/ijemm-56.pdf
txt: txt/ijemm-56.txt
title:
  Statistical Monitoring and Optimization of Electrochemical Machining using Shewhart Charts and Response Surface Methodology

summary:
  Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel. However, there are some difficulties while using in achieving the optimal parameters of machining process such as voltage applied (v), feed rate (f) and the diameter of the wire (d).


id: ijemm-70
author: Saha, Manabendra; Afsar, Ali Md.
date: 2018-09-10
pages: 11
extension: .pdf
mime: application/pdf
words: 5511
sentence: 307
flesch: 50
cache: cache/ijemm-70.pdf
txt: txt/ijemm-70.txt
title:
  Thermo-Mechanical and Morphological Properties of Water Hyacinth Reinforced Polypropylene Composites

summary:
  However, chemically treated WH fiber reinforced composites of the present study are found to show lower water absorption tendency compared to the untreated ones, indicating that the hydrophilic nature of WH fiber has substantially decreased upon chemical treatment with Benzenediazonium salt. 3.2.4 Water Absorption Characteristics Water absorption of WH fiber reinforced PP composites is one of the important characteristics that determines the suitability of terminal applications of these composites.


id: ijemm-99
author: Singh, Ashok Kumar; Rao, Aginaparru Sambasiva
title: Blade Lock Ring of 4th Stage Compressor Rotor: Failure Investigation
date: 2019-09-18
pages: 11
extension: .pdf
mime: application/pdf
words: 3804
sentence: 254
flesch: 58
cache: cache/ijemm-99.pdf
txt: txt/ijemm-99.txt
summary:
  The microstructure of failed lock ring is tempered martensite. Samples were cut from the fracture ends of both the counter parts of failed lock ring and cleaned ultrasonically in acetone to remove dirt and other residues mailto:singh_ashok3@rediffmail.com Blade Lock Ring of 4 th Stage Compressor Rotor: Failure Investigation 86 over the fracture surface.


id: ijemm-84
author: Akib, Yeasir Mohammad; Kabir, Asif; Hasan, Mahdi
title: Characteristics Analysis of Dual Bell Nozzle using Computational Fluid Dynamics
date: 2019-03-01
pages: 7
extension: .pdf
mime: application/pdf
words: 2496
sentence: 146
flesch: 60
cache: cache/ijemm-84.pdf
txt: txt/ijemm-84.txt
summary:
  Keywords: Altitude adaption, Dual bell nozzle, Supersonic flow, Inflection point, ANSYS Fluent 1 INTRODUCTION Recently dual bell nozzle has been unearthed to be one of the most undertaking concepts. [2] Figure 2: Dual bell nozzle (up to the first bell)


id: ijemm-66
author: Hasan, Nurul; Rahman, Ahmed Oliur; Alam, Md. Shah
title: Validation and Verification of CFD Prediction of Fluid Flow of a Submerged Vertical Round Jet
date: 2018-06-15
pages: 9
extension: .pdf
mime: application/pdf
words: 3638
sentence: 235
flesch: 58
cache: cache/ijemm-66.pdf
txt: txt/ijemm-66.txt
summary:
  Hasan N. CFD modelling of heat transfer in supersonic nozzles for magnesium production. Hasan N. CFD analysis of the mixing zone for a submerged jet system.


id: ijemm-91
author: Ogedengbe, Temitayo Samson; Awe, Peter; Joseph, Ojotu Ijiwo
date: 2019-03-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3868
sentence: 179
flesch: 51
cache: cache/ijemm-91.pdf
txt: txt/ijemm-91.txt
title:
  Comparative Analysis of Machining Stainless Steel using Soluble and Vegetable Oils as Cutting Fluids

summary:
  Based on the analysis of the S/N ratio, from the table the optimal machining performance for the surface roughness was obtained at 75m/min spindle speed (level 1); 0.40mm/rev feed rate (level 3); 0.05mm depth Ogedengbe, Awe and Joseph (2019): International Journal of Engineering Materials and Manufacture, 4(1), 33-40 37 of cut (level 2) for vegetable oil based cutting fluid, and 75m/min spindle speed (level 1); 0.40mm/rev feed rate (level 3); 0.08mm depth of cut (level 3) for soluble oil based cutting fluid. The overall results are summarized below: However, it can be concluded that vegetable oil produced a better surface finish and hence it is evident that soluble oil based cutting fluid can be replaced with vegetable oil based cutting fluid.


id: ijemm-82
author: Arief, Rudi Kurniawan; Nurlaila, Qomarotun; Armila, Armila
date: 2018-12-01
pages: 8
extension: .pdf
mime: application/pdf
words: 2814
sentence: 164
flesch: 63
cache: cache/ijemm-82.pdf
txt: txt/ijemm-82.txt
title:
  Comparative Study of Conventional and Quick Die Change Stamping Process: The Issue of Setup Time and Storage

summary:
  In the construction of conventional die, supporting and main components construct as one big assembly as shown in Figure. Figure 2: Construction of conventional die Arief, Nurlaila and Armila (2018): International Journal of Engineering Materials and Manufacture, 3(4), 216-223 218 4 ANALYSIS OF SETUP TIME EFFICIENCIES The QDCS is the combination of QDCD and QDCH where QDCD is very light in weight so it can be carried by hand, while conventional dies must be carried by lifting device.


id: ijemm-152
author: Islam, Samsul; Islam, Md. Shariful; Abedin, Mohammad Zoynal
title: Review on Heat Transfer Enhancement by Louvered Fin
date: 2021-01-30
pages: 21
extension: .pdf
mime: application/pdf
words: 8133
sentence: 384
flesch: 59
cache: cache/ijemm-152.pdf
txt: txt/ijemm-152.txt
summary:
  [10] observed air-side heat transfer and flow performance for louvered fin heat exchangers and obtained j and f factors as occupations of the Reynolds number. The louver geometry, tube diameter, and tube pitches are nominated from the databank with louvered fin heat exchangers provided.


id: ijemm-96
author: HIRENALLUR, SHIVAPRASAD MALLAIAH; GAIKWAD, GIRIDHARA G; V, ARUNKUMAR
date: 2019-06-15
pages: 8
extension: .pdf
mime: application/pdf
words: 3993
sentence: 194
flesch: 58
cache: cache/ijemm-96.pdf
txt: txt/ijemm-96.txt
title:
  Static Stiffness Parametric Studies of Newly Conceptualized Inter Shaft Squeeze Film Damper (ISSFD) Rings

summary:
  The pattern of circumferential variation of stiffness of each ring is studied and the results revealed a typical trend of decreasing stiffness in ISSFD ring with the increase in groove angle and hence the overlapping angle of grooves. (a) 3 grooves-135° (b) 4 grooves-105° Figure 2: Drawings of 3&4 grooves ISSFD rings showing variation of groove angle (a) CNC turned component (b) Groove cutting by Wire EDM (c) Finished ring after drilling holes by EDM Figure 3: Photographs showing Sequence of operations performed during the fabrication of ISSFD rings Figure 4.


id: ijemm-167
date: 2021-10-01
pages: 17
extension: .pdf
mime: application/pdf
words: 8122
sentence: 622
flesch: 34
cache: cache/ijemm-167.pdf
txt: txt/ijemm-167.txt
author:
  Fornaziero de Almeida, Júlia; Neves Mourarias, Murilo; Cecílio Gerolamo, Mateus; Teixeira Coelho, Reginaldo

title:
  The Implementation of Additive Manufacturing (AM) in Industries Starting from the Identification of Organizational Cultural Characteristics - A Review

summary:
  Impact of organizational culture values on organizational agility. Some of them identify organizational culture as a leading factor affecting its implementation in industries.


id: ijemm-89
author: Mukut, A N M Mominul Islam; Abedin, Mohammad Zoynal
title: Review on Aerodynamic Drag Reduction of Vehicles
date: 2019-03-01
pages: 14
extension: .pdf
mime: application/pdf
words: 7035
sentence: 480
flesch: 62
cache: cache/ijemm-89.pdf
txt: txt/ijemm-89.txt
summary:
  It is also seen that reduction of vehicle aerodynamic drag is essential to lower greenhouse gas emission. Several active flow control techniques used for reducing vehicle aerodynamic drag have been investigated both numerically and experimentally


id: ijemm-88
author: Kamaruddin, Shafie; Abd Latif, Mohd Arif Hafizi
title: Application of the Bees Algorithm for Constrained Mechanical Design Optimisation Problem
date: 2019-03-01
pages: 6
extension: .pdf
mime: application/pdf
words: 2991
sentence: 164
flesch: 61
cache: cache/ijemm-88.pdf
txt: txt/ijemm-88.txt
summary:
  Keywords: Bees Algorithm, Optimisation Algorithm, Multiple Disc Clutch Problem 1 INTRODUCTION There are many types of algorithms available today to find the optimal solution such as Ant-Colony algorithm, the Bees Algorithm, Teaching-Learning Based Optimisation and Particle Swarm Optimisation.


id: ijemm-13
author: Hasan, Md Shahanur; Mazid, Abdul Md; Clegg, Richard
title: The Basics of Stellites in Machining Perspective
date: 2016-12-19
pages: 16
extension: .pdf
mime: application/pdf
words: 10451
sentence: 510
flesch: 50
cache: cache/ijemm-13.pdf
txt: txt/ijemm-13.txt
summary:
  Surface residual stresses in machined austenitic stainless steel, Wear, 194, 168-173. 30. After removing the loading most of the stresses may be released but some portion of the stresses persists in the crystal lattice of materials and is called residual stress [21, 22, 23, 24, 25].


id: ijemm-77
author: Alazemi, Yahya A.; Adesta, Erry Y. T.
title: Implication of Engineering Project Management in Small and Medium Enterprise: Malaysian Perspective
date: 2018-12-01
pages: 8
extension: .pdf
mime: application/pdf
words: 5990
sentence: 308
flesch: 49
cache: cache/ijemm-77.pdf
txt: txt/ijemm-77.txt
summary:
  The Author(s) Creative Commons: CC BY 4.0 ABSTRACT Integrated project management includes the collection, combination and coordination of project elements in becoming a set of project management. In this research, three important aspects of project management such as life cycles, success factors and areas of problem and solutions in small to medium enterprises (SMEs) are presented.


id: ijemm-158
author: Jain, Srishti; Hyder, James; Corliss, Mike; Hung, Wayne NP
title: Electrochemical Polishing of Extruded and Laser Powder-Bed-Fused Inconel 718
date: 2021-10-01
pages: 15
extension: .pdf
mime: application/pdf
words: 7284
sentence: 381
flesch: 56
cache: cache/ijemm-158.pdf
txt: txt/ijemm-158.txt
summary:
  Amongst the three coatings there was always a trade-off between surface finish and the tool life. Few researchers had applied ECP as the post-processing method to improve surface finish of IN 718.


id: ijemm-137
title: Characterization and Performance of Minimum Quantity Lubricants in Through-Tool Drilling
date: 2020-10-20
pages: 18
extension: .pdf
mime: application/pdf
words: 10104
sentence: 521
flesch: 64
cache: cache/ijemm-137.pdf
txt: txt/ijemm-137.txt
author:
  Patil, Amla; Raval, Jay; Bangma, Tim; Edinbarough, Immanuel; Tai, Bruce; Stephenseon, David; Suleiman, Obeidat; Hung, Wayne NP

summary:
  The built-in light of the microscope had minimum intensity in still air to minimize vaporization of oil microdroplets during this operation. Upon entering the small channels, oil microdroplets must flow and impact the coolant channel wall since the channel axis was spirally downstream of the aerosol flow.


id: ijemm-155
author: Chakma, Jungko Moni; Abedin, Mohammad Zoynal
title: Review on Heat Transfer Enhancement by Rectangular Fin
date: 2021-04-15
pages: 14
extension: .pdf
mime: application/pdf
words: 7787
sentence: 582
flesch: 51
cache: cache/ijemm-155.pdf
txt: txt/ijemm-155.txt
summary:
  Modeling natural on convection heat transfer from perforated plates was performed by Zan et al. So many research about the enhancement of heat transfer by rectangular fins experimentally and numerically and found very significant result.


id: ijemm-86
author: Ogedengbe, Temitayo Samson; Abdulkareem, Sulaimon; Aweda, Jacob Olayiwola
title: Effect of Coolant Temperature on Surface Finish during Turning of Titanium Alloy Ti6Al4V
date: 2018-12-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3351
sentence: 165
flesch: 55
cache: cache/ijemm-86.pdf
txt: txt/ijemm-86.txt
summary:
  Results analyses show that cutting speed and depth of cut had considerable effect on surface roughness of Ti6Al4V. Surface roughness reduced when coolant temperature was reduced. Keywords: Turning, Coolant temperature, TI6AL4V, Surface roughness, Machining Parameter 1 INTRODUCTION Recent technological development especially in industries such as the medical, automobile and aviation is evidently driving the practical investigation into the use of light metals such as titanium, aluminium and manganese as prosthetics and general alternatives [1].


id: ijemm-69
author: Rao, Aginaparru Sambasiva; Singh, Ashok Kumar
title: Failure Analysis of Stainless Steel Lanyard Wire Rope
date: 2018-09-10
pages: 8
extension: .pdf
mime: application/pdf
words: 3575
sentence: 238
flesch: 61
cache: cache/ijemm-69.pdf
txt: txt/ijemm-69.txt
summary:
  Figure 1: Photograph of failed wire rope: (a) as-received condition, (b) one end of the broken rope, (c) another end of the broken rope displays several wires unwound from its strands and loosens from their strands. The fracture surfaces of failed wire rope near the actual fractures are shown in Figs. 6 (a-d).


id: ijemm-164
author: Hazra, Mrityunjoy; Singh, Ashok Kumar
date: 2022-01-01
pages: 12
extension: .pdf
mime: application/pdf
words: 5587
sentence: 308
flesch: 41
cache: cache/ijemm-164.pdf
txt: txt/ijemm-164.txt
title:
  Fatigue Behaviour of Connectors used in Cable Harnessing through Cavity Formation Related Microstructural Degradation: A Failure Investigation Perspective

summary:
  Hazra and Singh (2022): International Journal of Engineering Materials and Manufacture, 7(1), 13-24 14 voltages up to 1000 V and carries currents above 5A. Heavy duty connectors function at voltages up to hundreds of kV and carry currents up to tens of kA. 2.2 Aluminium as Connector Material Aluminium is available in a variety of suitable alloys and forms which allow for the optimum choice for the manufacture of electrical connectors [3]. Presence of ample of rubbed zones on connector surface at region close to the fracture as well as at regions away from the fracture (Figs. 4,7,8 and 9) indicates continuous hitting between two mating connectors.


id: ijemm-135
author: Islam, Saiful; Evans, Nina
date: 2020-07-30
pages: 9
extension: .pdf
mime: application/pdf
words: 7285
sentence: 386
flesch: 43
cache: cache/ijemm-135.pdf
txt: txt/ijemm-135.txt
title:
  Key Success Factors of PRINCE2 Project Management Method in Software Development Project: KSF of PRINCE2 in SDLC

summary:
  2.3 PRINCE2 Themes All the themes of PRINCE2 are addressed continually in such way which provides aspects of project management (Commerce, 2009). In project management a project can be defined both with a project life cycle (PLC) and an SDLC, during http://en.wikipedia.org/wiki/Systems_engineering http://en.wikipedia.org/wiki/Information_systems http://en.wikipedia.org/wiki/Software_engineering http://en.wikipedia.org/wiki/Software_engineering http://en.wikipedia.org/wiki/Waterfall_model http://en.wikipedia.org/wiki/Spiral_model http://en.wikipedia.org/wiki/Agile_software_development http://en.wikipedia.org/wiki/Software_prototyping#Throwaway_prototyping http://en.wikipedia.org/wiki/Incremental_development http://en.wikipedia.org/wiki/Project_management http://en.wikipedia.org/wiki/Project_life_cycle Key Success Factors of PRINCE2 Project Management Method in Software Development Project 79 which slightly different activities occur.


id: ijemm-143
author: Hung, Wayne NP; Feng, Zhujian; Lomeli, Paul
title: Computer Simulation of Low Frequency Vibration in Electrochemical Machining
date: 2021-01-30
pages: 21
extension: .pdf
mime: application/pdf
words: 9595
sentence: 500
flesch: 56
cache: cache/ijemm-143.pdf
txt: txt/ijemm-143.txt
summary:
  Tsuji, Y.; Kawaguchi, T.; Tanaka, T. Discrete particle simulation of two-dimensional fluidized bed. The study aimed to find relevant process parameters to increase particle flushing speed, therefore, material removal rate and part quality after ECM.


id: ijemm-90
author: Hazra, Mrityunjoy; Singh, Satyapal
date: 2019-09-19
pages: 13
extension: .pdf
mime: application/pdf
words: 6802
sentence: 302
flesch: 49
cache: cache/ijemm-90.pdf
txt: txt/ijemm-90.txt
title:
  Failure Analysis of Diode Components of Electronic Relay Packages Via Thorough Microstructural Characterization

summary:
  Miniaturization of systems based on integrated circuits and small size components, close component spacing, separable electrical contacts having lower voltages and contact forces than before have resulted in failures of electronic equipment due to the formation of small quantities of corrosion products. Corrosion product on that place contains majorly Fe and O, along with small amounts of Cl, K and Si, as is shown in Figure 6i.


# url

id: ijemm-117
domain: books.google.com
url:
  http://books.google.com/books?hl=en&lr=&id=wbwv3nt1gp0c&oi=fnd&pg=pr3&dq=info:5ymtkpiyuswj:scholar.google.com&ots=hvs7i22zwi&sig=5zjibrp6hg2v2ebo3rbuth-a6dk


id: ijemm-234
domain: news.climate.columbia.edu
url:
  https://news.climate.columbia.edu/2011/11/16/farmers-flames-and-climate-are-we-entering-an-age-ofmega-fires/[accessed


id: ijemm-234
domain: www.mudomaha.com
url:
  https://www.mudomaha.com/blog/why-does-natural-gas-smell-rotteneggs#:~:text=natural%20gas%20is%20an%20efficient,or%20hydrogen%20sulfide%20like%20odor


id: ijemm-234
domain: books.google.com
url:
  https://books.google.com/books?id=yxt5aw6bjiuc&q=purposely+starting+fire+arson+crime+most+jurisdictions&pg=pa349


id: ijemm-234
domain: books.google.com
url:
  https://books.google.com/books?id=l6epcgaaqbaj&q=fire+insurance+can+mitigate+the+financial+impact+of+fire&pg=pa33


id: ijemm-234
domain: www.mudomaha.com
url:
  https://www.mudomaha.com/blog/why-does-natural-gas-smell-rotten-eggs#:~:text=natural%20gas%20is%20an%20efficient,or%20hydrogen%20sulfide%20like%20odor


id: ijemm-234
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/316220622_detection_of_fire_and_gas_leakage_in_industry_to_ensure_safety_condition


id: ijemm-100
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=muramatsu%20t%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-100
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=sherafati%20m%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-100
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=malavasi%20l%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-100
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=postorino%20p%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-100
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=satpathy%20s%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-100
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=struzhkin%20vv%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-178
domain: www.usgs.gov
url:
  https://www.usgs.gov/special-topic/water-science-school/science/water-you-water-and-human-body?qtscience_center_objects=0#qt-science_center_objects


id: ijemm-10
domain: www.refdoc.fr
url:
  http://www.refdoc.fr/?traduire=en&formrechercher=submit&formrechercher_txt_recherche_name_attr=auteursnom:%20%28mohammed%29


id: ijemm-224
domain: www.forbes.com
url:
  https://www.forbes.com/sites/feliciajackson/2018/04/10/blockchain-nemesis-or-future-forutilities/#3e6156114f0b


id: ijemm-224
domain: www.alcimed.com
url:
  https://www.alcimed.com/en/alcim-articles/blockchaintechnology-for-the-energy-sector-significant-potential-but-still-key-challenges-to-overcome


id: ijemm-224
domain: www.alcimed.com
url:
  https://www.alcimed.com/en/alcim-articles/blockchain-technology-for-the-energy-sector-significant-potential-but-still-key-challenges-to-overcome


id: ijemm-119
domain: www.autotrader.com
url:
  http://www.autotrader.com/car-video/car-color-test-are-black-cars-really-hotter-in-the-sun-video-242940


id: ijemm-201
domain: ai-med.io
url:
  http://ai-med.io/dt_team/identifying-clinicalvariationusing-machine-intelligence-a-pilot-incolorectal-surgery


id: ijemm-201
domain: www.businessnewsdaily.com
url:
  https://www.researchgate.net/profile/anna_soltysikhttps://www.businessnewsdaily.com/15096-artificial-intelligence-in-healthcare.html


id: ijemm-201
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/anna_soltysik-piorunkiewicz/publication/271014570_artificial_intelligence_systems_for_knowledge_management_in_e-health_the_study_of_intelligent_software_agents/links/54bd0ee30cf218da9390d759/artificial-intelligence-systems-for-knowledge-management-in-e-health-the-study-of-intelligent-software-agents.pdf


id: ijemm-201
domain: ai-med.io
url:
  http://ai-med.io/dt_team/machine-learning-modelsfor-selection-ofdrug-candidates-for-treatment-ofalzheimers-disease


id: ijemm-201
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/peter_schulz2/publication/221250696_bad_literacy_the_internet_and_t


id: ijemm-201
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/peter_schulz2/publication/221250696_bad_literacy_the_internet_and_the_limits_of_patient_empowerment/links/57f5422108ae91deaa5c77e9/bad-literacy-the-internet-and-the-limits-of-patient-empowerment.pdf


id: ijemm-248
domain: cru.cahe.wsu.edu
url:
  https://research.libraries.wsu.edu:8443/xmlui/handle/2376/5021%5cnhttp://cru.cahe.wsu.edu/cepublications


id: ijemm-230
domain: www.bloomberg.com
url:
  https://www.bloomberg.com/news/articles/2021-04-25/leaking-landfill-contributes-toworld-s-mystery-methane-hotspot


id: ijemm-230
domain: www.bloomberg.com
url:
  https://www.bloomberg.com/news/articles/2021-04-25/leaking-landfill-contributes-to-world-s-mystery-methane-hotspot


id: ijemm-196
domain: education.gsfc.nasa.gov
url:
  https://web.archive.org/web/20161229182712/http://education.gsfc.nasa.gov/experimental/july61999siteupda


id: ijemm-217
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/343356920_recent_developments_in_biosensors_for_healthcare_an


id: ijemm-217
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/330342204_advanced_biomaterials_for_biosensor_and_theranostic


id: ijemm-217
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pmc/ahttps://www.ncbi.nlm.nih.gov/pmc/articles/pmc6315477/rticles/pmc63


id: ijemm-217
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/282796834_probing_the_localized_surface_plasmon_field_of_a_g


id: ijemm-217
domain: researchers.mq.edu.au
url:
  https://researchers.mq.edu.au/en/publications/enhancing-direct-electron-transfer-ofglucose-oxidase-using-a-gol


id: ijemm-53
domain: www.epa.gov
url:
  http://www.thepoultrysite.com/poultrynews/39514/dpm-malaysia-aims-to-export-30-ofhttps://www.epa.gov/sites/production/files/2015-07/documents/emission-factors_2014.pdf


id: ijemm-251
domain: www.aviationpros.com
url:
  https://www.aviationpros.com/gse/pushbackstractors-utility-vehicles/tow-bars/blog/10963025/twohour-delay-follows-tow-bar-break-at-bos


id: ijemm-251
domain: www.alcotec.com
url:
  http://www.alcotec.com/us/en/education/knowledge/techknowledge/trouble-shooting-for-aluminiumwelding.cfm


id: ijemm-251
domain: www.adhocmarinedesigns.co.uk
url:
  http://www.adhocmarinedesigns.co.uk/wp-content/uploads/2012/07/proboat-june-july-2012-aluminiumwelds.pdf


id: ijemm-251
domain: www.alcotec.com
url:
  http://www.alcotec.com/us/en/education/knowledge/techknowledge/the-repair-of-aluminium-structures.cfm


id: ijemm-251
domain: www.aviationpros.com
url:
  https://www.aviationpros.com/gse/pushbacks-tractors-utility-vehicles/tow-bars/blog/10963025/twohour-delay-follows-tow-bar-break-at-bos


id: ijemm-251
domain: www.alcotec.com
url:
  http://www.alcotec.com/us/en/education/knowledge/techknowledge/trouble-shooting-for-aluminum-welding.cfm


id: ijemm-251
domain: www.researchgate.net
url:
  https://www.researchgate.net/journal/the-international-journal-of-advanced-manufacturing-technology-1433-3015


id: ijemm-251
domain: www.adhocmarinedesigns.co.uk
url:
  http://www.adhocmarinedesigns.co.uk/wp-content/uploads/2012/07/proboat-june-july-2012-aluminum-welds.pdf


id: ijemm-251
domain: www.esabna.com
url:
  https://www.esabna.com/us/en/education/blog/how-to-avoid-cracking-in-aluminum-alloys.%20cfm#:~:text=to%20counteract%20cracking%20problems%2c%20use,the%20hot%20cracking%20temperature%20range


id: ijemm-251
domain: www.alcotec.com
url:
  http://www.alcotec.com/us/en/education/knowledge/techknowledge/the-repair-of-aluminum-structures.cfm


id: ijemm-168
domain: documentation.thesteveportal.plm.automation.siemens.com
url:
  https://documentation.thesteveportal.plm.automation.siemens.com/starccmplus_latest_en/index.html?param


id: ijemm-168
domain: documentation.thesteveportal.plm.automation.siemens.com
url:
  https://documentation.thesteveportal.plm.automation.siemens.com/starccmplus_latest_en/index.html#page/s


id: ijemm-134
domain: www.who.int
url:
  https://www.who.int/news-room/detail/03-02-2017-early-cancer-diagnosis-saveslives-cuts-treatment-costs


id: ijemm-144
domain: us.vwr.com
url:
  https://us.vwr.com/store/product/4787011/barnstead-thermolyne-ashing-furnaces-type-6000-and-type-30400thermo-scientific


id: ijemm-253
domain: www.scirp.org
url:
  https://www.scirp.org/journal/articles.aspx?searchcode=school+of+control+science+and+engineering%2c+shandong+university%2c+jinan%2c+china&searchfield=affs&page=1&skid=0


id: ijemm-71
domain: www.thehindu.com
url:
  http://www.thehindu.com/news/national/other-states/boiler-explodes-in-ntpcunchahar-plant/article19961812.ece


id: ijemm-71
domain: www.indiatoday.in
url:
  https://www.indiatoday.in/india/story/uttar-pradesh-boilerblast-rae-bareli-ntpc-boiler-unit-1077764-2017-11-01


id: ijemm-71
domain: www.indiablooms.com
url:
  https://www.indiablooms.com/news-details/n/35441/boiler-blast-at-ntpc-power-plant-in-up-kills-8.html


id: ijemm-71
domain: www.indiatoday.in
url:
  https://www.indiatoday.in/india/story/uttar-pradesh-boiler-blast-rae-bareli-ntpc-boiler-unit-1077764-2017-11-01


id: ijemm-162
domain: www.ada.org
url:
  https://www.ada.org/en/publications/ada-news/2017archive/december/hpi-report-shows-dental-spending-increased-again-in-2016


id: ijemm-128
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0ahukewiaszpdx6dlahxcmw4khbnzat4qfggsmam&url=https%3a%2f%2fwww3.epa.gov%2fepawaste%2fhazard%2ftsd%2fpcbs%2f&usg=afqjcnfwsfeomor1b1tj2whbu3e8oof0ja


id: ijemm-167
domain: ibima.org
url:
  https://ibima.org/accepted-paper/organizational-culture-prerequisite-of-an-innovativebehavior-in-business


id: ijemm-77
domain: www.smecorp.gov.my
url:
  www.smecorp.gov.my/index.php/en/resources/2015-1221-11-07-06/sme-annualreport/book/69-annual-report-2015-16/2-annual-report


id: ijemm-77
domain: www.smecorp.gov.my
url:
  http://www.smecorp.gov.my/index.php/en/resources/2015-12-21-11-07-06/sme-annual-report-2014/2-annual-report


id: ijemm-77
domain: www.smecorp.gov.my
url:
  http://www.smecorp.gov.my/index.php/en/resources/2015-12-21-11-07-06/sme-annual-report/book/69-annual-report-2015-16/2-annual-report


id: ijemm-155
domain: www.researchgate.net
url:
  https://www.researchgate.net/deref/http%3a%2f%2fdx.doi.org%2f10.22531%2fmuglajsci.445045?_sg%5b0%5d=oah0dudv0-ijp0twvveihbn7euq_wpcthahhhjghth0oaxyxdyypecmefxy3pzn693mc_x7ng2ynw6oci2yqdk8p7g.sddfimbfc-dtsckqnqxtu00d7xzvh-p2jazhxnitq1vheidwb2oeyzvrzti1pn9rzw6ju4ile2okarfuionz0a


id: ijemm-137
domain: www.dynacast.com
url:
  https://www.dynacast.com/en/knowledge-center/material-information/die-castmetals/aluminum-die-casting-metals/aluminum-alloy-a380


id: ijemm-137
domain: asmedigitalcollection.asme.org
url:
  https://asmedigitalcollection.asme.org/imece/proceedingspdf/imece2015/57359/v02at02a057/2492078/v02at02a057-imece2015-53390.pdf


id: ijemm-135
domain: www.computerworld.com
url:
  https://www.computerworld.com/article/2576450/app-development/app-development-systemdevelopment-life-cycle.html>


id: ijemm-135
domain: www.computerworld.com
url:
  https://www.computerworld.com/article/2576450/app-development/app-development-system-development-life-cycle.html


id: ijemm-164
domain: www.researchgate.net
url:
  https://www.researchgate.net/journal/ieee-transactions-on-components-hybrids-and-manufacturing-technology-0148-6411


# ent

id: ijemm-170
sid: 132
eid: 1
type: PERSON
entity:
  https://doi.org/10.1016/j.optlastec.2020.106845 https://doi.org/10.3390/coatings9070418 https://doi.org/10.1016/j.precisioneng.2018.12.005


id: ijemm-10
sid: 31
eid: 1
type: PERSON
entity:
  http://www.refdoc.fr/?traduire=en&formrechercher=submit&formrechercher_txt_recherche_name_attr=auteursnom:%20%28mohammed%29 http://www.refdoc.fr/?traduire=en&formrechercher=submit&formrechercher_txt_recherche_name_attr=auteursnom:%20%28mohammed%29


id: ijemm-100
sid: 253
eid: 1
type: PERSON
entity:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=muramatsu%20t%5bauthor%5d&cauthor=true&cauthor_uid=26272923 https://www.ncbi.nlm.nih.gov/pubmed/?term=sherafati%20m%5bauthor%5d&cauthor=true&cauthor_uid=26272923


id: ijemm-234
sid: 182
eid: 1
type: PERSON
entity:
  https://en.wikipedia.org/wiki/gas_leak#cite_note-3 https://en.wikipedia.org/wiki/fire_safety#cite_note-3


id: ijemm-234
sid: 384
eid: 1
type: PERSON
entity:
  https://doi.org/10.1111%2fj.1467-8306.1987.tb00156.x https://doi.org/10.1111%2fj.1467-8306.1987.tb00156.x https://en.wikipedia.org/wiki/doi_(identifier


id: ijemm-234
sid: 389
eid: 1
type: PERSON
entity:
  https://en.wikipedia.org/wiki/special:booksources/9789401805414 https://www.mudomaha.com/blog/why-does-natural-gas-smell-rotten-eggs#:~:text=natural%20gas%20is%20an%20efficient,or%20hydrogen%20sulfide%20like%20odor https://www.mudomaha.com/blog/why-does-natural-gas-smell-rotten-eggs#:~:text=natural%20gas%20is%20an%20efficient,or%20hydrogen%20sulfide%20like%20odor https://en.wikipedia.org/wiki/isbn_(identifier


id: ijemm-234
sid: 391
eid: 1
type: PERSON
entity:
  https://en.wikipedia.org/wiki/special:booksources/978-1-10741-532-4 https://en.wikipedia.org/wiki/special:booksources/978-1-10741-532-4 https://en.wikipedia.org/wiki/oclc_(identifier


id: ijemm-201
sid: 157
eid: 1
type: GPE
entity:
  http://ai-med.io/dt_team/identifying-clinicalvariationusing-machine-intelligence-a-pilot-incolorectal-surgery/


id: ijemm-201
sid: 164
eid: 1
type: ORG
entity:
  https://www.researchgate.net/profile/anna_soltysikhttps://www.businessnewsdaily.com/15096-artificial-intelligence-in-healthcare.html https://www.researchgate.net/profile/anna_soltysik-piorunkiewicz/publication/271014570_artificial_intelligence_systems_for_knowledge_management_in_e-health_the_study_of_intelligent_software_agents/links/54bd0ee30cf218da9390d759/artificial-intelligence-systems-for-knowledge-management-in-e-health-the-study-of-intelligent-software-agents.pdf islam


id: ijemm-201
sid: 176
eid: 1
type: LAW
entity:
  https://www.researchgate.net/publication/329163470_artificial_intelligence_in_healtshcare-a_review 13


id: ijemm-201
sid: 180
eid: 1
type: ORG
entity:
  https://www.researchgate.net/profile/peter_schulz2/publication/221250696_bad_literacy_the_internet_and_t he_limits_of_patient_empowerment/links/57f5422108ae91deaa5c77e9


id: ijemm-217
sid: 287
eid: 2
type: ORG
entity:
  https://www.researchgate.net/publication/343356920_recent_developments_in_biosensors_for_healthcare_an d_biomedical_applications_a_review


id: ijemm-217
sid: 407
eid: 2
type: PERSON
entity:
  https://www.researchgate.net/publication/282796834_probing_the_localized_surface_plasmon_field_of_a_g old_nanoparticle-based_fibre_optic_biosensor


id: ijemm-168
sid: 254
eid: 1
type: LOC
entity:
  https://documentation.thesteveportal.plm.automation.siemens.com/starccmplus_latest_en/index.html#page/s tarccmp%2fguid-db165a77


id: ijemm-251
sid: 325
eid: 4
type: PERSON
entity:
  https://www.researchgate.net/scientific-contributions/77965126-j-nikolaou https://www.researchgate.net/profile/george_papadimitriou3 https://www.researchgate.net/journal/0261-3069_materials_and_design https://www.researchgate.net/journal/0261-3069_materials_and_design


id: ijemm-99
sid: 227
eid: 1
type: MONEY
entity:
  10.17222/mit.2015.169 http://4.imimg.com/data4/kg/vi/my-626992/stainless-steel-422-round-bar.pdf http://4.imimg.com/data4/kg/vi/my-626992/stainless-steel-422-round-bar.pdf


id: ijemm-134
sid: 448
eid: 1
type: PERSON
entity:
  https://www.cancer.ca/~/media/cancer.ca/cw/cancer%20information/cancer%20101/canadian%20cancer% 20statistics/canadian-cancer


id: ijemm-125
sid: 184
eid: 1
type: PERSON
entity:
  https://www.sciencedirect.com/science/journal/00137944 https://www.sciencedirect.com/science/journal/00137944


id: ijemm-253
sid: 96
eid: 8
type: MONEY
entity:
  39 http://dynamicfireescape.com:9999/sp_problem http://dynamicfireescape.com:9999/sp_problem al-hady


id: ijemm-128
sid: 52
eid: 5
type: PERSON
entity:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0ahukewiaszpdx6dlahxcmw4khbnzat4qfggsmam&url=https%3a%2f%2fwww3.epa.gov%2fepawaste%2fhazard%2ftsd%2fpcbs%2f&usg=afqjcnfwsfeomor1b1tj2whbu3e8oof0ja abutu et al


id: ijemm-13
sid: 146
eid: 5
type: PERSON
entity:
  http://www.stellite.com/linkclick.aspx?link=246&tabid=242 http://www.stellite.com/linkclick.aspx?link=248&tabid=242 http://www.stellite.com/linkclick.aspx?link=248&tabid=242


id: ijemm-84
sid: 2
eid: 6
type: ORG
entity:
  bangladesh 2 department of mechanical engineering bangladesh university of engineering and technology (buet) dhaka


id: ijemm-91
sid: 75
eid: 14
type: DATE
entity:
  75 0.05 0.1 75 0.10 0.5 75 0.40 0.8 100 0.05 0.1 100 0.10 0.5 100 0.40 0.8 135 0.05 0.1 135 0.10 0.5 135 0.40 0.8 2.3


id: ijemm-135
sid: 103
eid: 1
type: ORG
entity:
  http://en.wikipedia.org/wiki/incremental_development http://en.wikipedia.org/wiki/project_management http://en.wikipedia.org/wiki/project_life_cycle key success


id: ijemm-135
sid: 365
eid: 1
type: ORG
entity:
  https://www.computerworld.com/article/2576450/app-development/app-development-system-development-life-cycle.html https://www.computerworld.com/article/2576450/app-development/app-development-system-development-life-cycle.html


id: ijemm-167
sid: 389
eid: 2
type: ORG
entity:
  https://ibima.org/accepted-paper/organizational-culture-prerequisite-of-an-innovativebehavior-in-business/


id: ijemm-77
sid: 80
eid: 1
type: PERSON
entity:
  http://www.method123.com/project-initiation-phase.php http://www.method123.com/project-planning-phase.php


id: ijemm-77
sid: 287
eid: 4
type: ORG
entity:
  http://www.smecorp.gov.my/index.php/en/resources/2015-12-21-11-07-06/sme-annual-report-2014/2-annual-report http://www.smecorp.gov.my/index.php/en/resources/2015-12-21-11-07-06/sme-annual-report/book/69-annual-report-2015-16/2-annual-report http://www.smecorp.gov.my/index.php/en/resources/2015-12-21-11-07-06/sme-annual-report/book/69-annual-report-2015-16/2-annual-report http://www.smecorp.gov.my/index.php/en/resources/2015-12-21-11-07-06/sme-annual-report/book/69-annual-report-2015-16/2-annual-report


id: ijemm-162
sid: 370
eid: 1
type: GPE
entity:
  https://www.ada.org/en/publications/ada-news/2017archive/december/hpi-report-shows-dental-spending-increased-again-in-2016 3


id: ijemm-164
sid: 270
eid: 1
type: PERSON
entity:
  https://www.sciencedirect.com/science/journal/22387854 https://www.sciencedirect.com/science/journal/22387854


# pos

id: ijemm-178
sid: 196
tid: 7
pos: NOUN
token:
  https://www.usgs.gov/special-topic/water-science-school/science/water-you-water-and-human-body?qtscience_center_objects=0#qt-science_center_objects

lemma:
  https://www.usgs.gov/special-topic/water-science-school/science/water-you-water-and-human-body?qtscience_center_objects=0#qt-science_center_object


id: ijemm-224
sid: 355
tid: 7
pos: PROPN
token:
  https://www.alcimed.com/en/alcim-articles/blockchaintechnology-for-the-energy-sector-significant-potential-but-still-key-challenges-to-overcome/

lemma:
  https://www.alcimed.com/en/alcim-articles/blockchaintechnology-for-the-energy-sector-significant-potential-but-still-key-challenges-to-overcome/


id: ijemm-224
sid: 383
tid: 11
pos: PROPN
token:
  https://www.alcimed.com/en/alcim-articles/blockchain-technology-for-the-energy-sector-significant-potential-but-still-key-challenges-to-overcome/

lemma:
  https://www.alcimed.com/en/alcim-articles/blockchain-technology-for-the-energy-sector-significant-potential-but-still-key-challenges-to-overcome/


id: ijemm-234
sid: 327
tid: 4
pos: VERB
token:
  https://news.climate.columbia.edu/2011/11/16/farmers-flames-and-climate-are-we-entering-an-age-ofmega-fires/[accessed

lemma:
  https://news.climate.columbia.edu/2011/11/16/farmers-flames-and-climate-are-we-entering-an-age-ofmega-fires/[accesse


id: ijemm-201
sid: 164
tid: 26
pos: PROPN
token:
  publication/271014570_artificial_intelligence_systems_for_knowledge_management_in_ehealth_the_study_of_intelligent_software_agents

lemma:
  publication/271014570_artificial_intelligence_systems_for_knowledge_management_in_ehealth_the_study_of_intelligent_software_agents


id: ijemm-201
sid: 169
tid: 4
pos: PROPN
token:
  http://ai-med.io/dt_team/machine-learning-modelsfor-selection-ofdrug-candidates-for-treatment-ofalzheimers-disease/

lemma:
  http://ai-med.io/dt_team/machine-learning-modelsfor-selection-ofdrug-candidates-for-treatment-ofalzheimers-disease/


id: ijemm-248
sid: 375
tid: 21
pos: NOUN
token:
  https://research.libraries.wsu.edu:8443/xmlui/handle/2376/5021%5cnhttp://cru.cahe.wsu.edu/cepublications

lemma:
  https://research.libraries.wsu.edu:8443/xmlui/handle/2376/5021%5cnhttp://cru.cahe.wsu.edu/cepublication


id: ijemm-251
sid: 322
tid: 1
pos: NOUN
token:
[cell repeats an earlier one in this file: 134 characters]

lemma:
  https://www.aviationpros.com/gse/pushbacks-tractors-utility-vehicles/tow-bars/blog/10963025/twohour-delay-follows-tow-bar-break-at-bo


id: ijemm-134
sid: 706
tid: 1
pos: NOUN
token:
  https://www.who.int/news-room/detail/03-02-2017-early-cancer-diagnosis-saveslives-cuts-treatment-costs

lemma:
  https://www.who.int/news-room/detail/03-02-2017-early-cancer-diagnosis-saveslives-cuts-treatment-cost


id: ijemm-135
sid: 341
tid: 15
pos: X
token:
  https://www.computerworld.com/article/2576450/app-development/app-development-systemdevelopment-life-cycle.html

lemma:
  https://www.computerworld.com/article/2576450/app-development/app-development-systemdevelopment-life-cycle.html


