261-1397-1-LE.qxd 1. Introduction Improving energy efficiency is currently worldwide believed to be the cheapest, fastest and most environmental friendly way to meet a significant portion of the worlds’ energy needs. Improved energy efficiency reduces the need for investing in energy supply. Therefore, countries need to pursue energy efficiency policies more diligently in the long-term regardless of the development of fuel prices [1]. The European Union (EU) has set itself the objective of achieving 20% primary energy savings in 2020. In Portugal, the National Energy Strategy (NES 2020) approved by [2] also foresees the approval of a National Energy Efficiency Action Plan (NEEAP) in its energy International Journal of Sustainable Energy Planning and Management Vol. 02 2014 81 efficiency guidelines. Moreover, the Portuguese NES 2020 aims to foster the industrial cluster of energy efficiency, creating 21000 new jobs by 2020. Since there is a strong interest on the promotion of energy efficiency through retrofit investments in buildings, it is somehow of public interest the monitoring of its impact on the employment. Therefore, the aim of this paper is to provide a consistent estimate of the contribution of the previously identified retrofit energy saving measures in the building sector (residential, private services and public services) in net employment generation, i.e., considering both the potential job creation and the potential job destruction resulting from the reduction of energy consumption. * Corresponding author, E-mail: chenriques@iscac.pt International Journal of Sustainable Energy Planning and Management Vol. 02 2014 81-92 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 ��������� ����� �������� ��� ������ �������������� � ���������� ���� ������� �� ��������� �� �������� ����� ������ ���� ���� ��� ����� �� �!��" �������� �������� #������ �� ��������� �� �������� ��$�� %�� ��&�� '����� ������ &� '���� ����!�((� �������� �������� ��'$�� �������� %�� ������ &� �������� �((� ����!��� �������� �������� )� ���� �� $ ����� � �� � � *��+������ �� �������� �������� �+ ,��� &� ���+�� �"-� ��� !-�# �������� �������� A B S T R A C T Energy efficiency plays a significant role in increasing the security of energy supply and mitigating climate change. Although this role is indubitable, there is an ongoing discussion about the employment impacts of promoting energy efficiency measures, in particular of building retrofit investments. The purpose of this paper is to provide an estimation of the number of net jobs associated with the most common retrofit investment options in the building stock of Portugal. The examined investment options aim at improving the thermal properties of the building envelope and include the insulation of external walls and roof and the substitution of window frames and single glazed windows. The implementation of a methodological framework for the assessment of employment benefits is based on Input-Output (I-O) analysis, providing consistent estimates for depicting the significant contribution of energy saving measures in the building sector (residential, private services and public services) in net employment generation. Keywords: Input-Output analysis, Energy Efficiency, Buildings, Retrofit investment, Employment. URL: dx.doi.org/10.5278/ijsepm.2014.2.7 82 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 The paper is organized as follows: section 2, briefly reviews the latest literature on the subject; section 3 presents the methodological framework used herein; section 4 presents the implementation of the methodology in the Portuguese context after a brief characterization of the building sector in Portugal; section 5 provides some illustrative results, and finally section 6 highlights some conclusions and presents future work developments. 2. Review of previous studies The macroeconomic effects of energy efficiency are mostly expressed in the form of employment or economic growth [3]. A number of studies have sought to estimate the employment potential of several energy efficiency measures in terms of employment factors, though chief methodological challenges remain when determining job creation [4]. In this context, [5] presented an analysis of the employment impacts of two types of energy conservation efforts, namely retrofitting of buildings and increased energy efficiency in the industrial sector in the United States of America (USA). [6] evaluated several dimensions of low cost techniques in building construction in India and estimated the generation of on-site employment that occurred from these interventions. [7] provided a template for economic evaluation of domestic energy-efficiency programs. In their study they estimated the number of jobs resulting from the implementation of various energy efficiency technologies in the Irish dwelling stock over a ten-year period. [8] analyzed the macroeconomic impacts of increasing energy efficiency in the USA’s residential and commercial building stock, using Input-Output (I-O) analysis. [9] examined the social impacts (employment and fiscal revenues) of an energy conservation program in Germany. [10] estimated the net employment impacts of a large-scale energy efficiency retrofit programme in Hungary, simulating five scenarios. [11] presented the results of the implementation of an efficiency strategy in Germany until 2020, which is focused on cost-effective measures. The outcomes obtained show that improved energy efficiency results in a variety of positive effects on the economy and the environment, namely on additional employment and economic growth. [12] have demonstrated in their study that there is a triple win available of warmer homes, greater energy efficiency and economic growth if carbon taxes revenue can be used to benefit consumers and fuel poor households in particular in United Kingdom (UK). [13] analyzed the potential of a national building energy rating and disclosure policy to create jobs and reduce energy- related expenditures in commercial and multifamily residential buildings in USA. Among the energy efficiency measures available, energy retrofit measures are known to be some of the most cost effective ways of saving energy and reducing greenhouse gas emissions. In addition, such measures can result in a significant number of local and national employment opportunities. According to [14] energy efficiency retrofit investments in buildings can be more labour-intensive than any other key climate intervention. Retrofits require the upgrade of old buildings, involving the physical and operational upgrade of thermal conditions of buildings, leading to lower energy consumption. In Portugal the scientific literature on this field of research is not abundant. In this framework, and to our knowledge, only in [15] some preliminary results are reported regarding the trade-off analysis of the main impacts due to the implementation of the same four specific energy efficiency retrofit measures herein tackled on the overall employment and GDP. A systemic methodology has been proposed by introducing a bottom-up approach in a previous version of a top-down Multiobjective Linear Programming (MOLP) I-O model with interval coefficients that allows the assessment of avoided energy consumption and CO2 emissions associated with the retrofit measures. However, besides the fact that the previous methodological approach only considers the average trade-offs for a prospective year, ignoring the accumulated effects, further insights are also necessary for the study of employment generation, requiring the models’ closure, namely by explicitly considering the induced effects. Therefore, this paper is aimed at computing besides the projected accumulated direct and indirect employment effects, the expected accumulated induced effects (Type II multipliers) corresponding to those originated by the re-spending of income resulting from both direct and indirect effects from 2009 (the base year of our study) until 2020. Finally, the possible negative impacts of these energy retrofit measures will also be analysed by considering the potential reduction of energy consumption and the corresponding backward and forward sectoral linkages on job generation. 3. Methodological framework I-O matrices allow the representation of each sector’s production process through a vector of structural coefficients that describes the relationship between the intermediate inputs consumed in the production process and the total output. The supply side is split into several processing industries that deliver their total output (production), for intermediate consumption or final demand. These relationships can be illustrated through the following equation: xi = + yi 3.1 where xi is the output of sector i, xij is the input from sector i to sector j, and yi is the total final demand for sector i. The monetary values in the transactions matrices can then be converted into ratios called technical coefficients. This is done by dividing each cell of the domestic intermediate matrix by its column total (output at basic prices). Considering the hypothesis of constant returns to scale, Eq. 3.1 becomes: xi = xj + yi 3.2 in which the coefficients aij are the amount of input delivered by sector i to sector j per unit of sector’s j output, known as technical coefficients (or direct coefficients). The productive system at a national level can then be represented through the following basic I-O system of equations: x = Ax + y 3.3 where A is a matrix of technical coefficients, y is a vector of final demand, and x is a vector of the corresponding outputs. In order to finally calculate the output multipliers, one needs to derive Leontief inverse matrices. Eq. 3.3 can then be rearranged to: x = (I – A)–1y, 3.4 aij j n = ∑ 1 xij j n = ∑ 1 where I is the identity matrix with convenient dimensions and (I – A)–1 is also known as the Leontief inverse. Each generic element, bij, of (I – A) –1 represents the total amount directly and indirectly needed of good or service i to deliver a unit of final demand of good or service j. 3.1. Employment multiplier concepts and basic assumptions Usually in models that account for job creation, jobs are measured in terms of job-years or full time equivalency. In our study, a job is a metric that represents the amount of resources necessary to employ one person for forty hours per week for a full year (i.e. full time employment – FTE). Although precise definitions vary, direct jobs herein considered refer to the jobs generated from a change in spending patterns resulting from an expenditure or effort taken in a retrofit project [16]. Thus, the direct job contribution of a retrofit measure in terms of employment can easily be obtained by considering the direct job coefficients (jobs per output) of each activity sector engaged in all the activities of that retrofit measure. Indirect jobs are generated in the supply chain and supporting industries of an industry that is directly impacted by an expenditure or effort [16]. Induced jobs are generated by the re-spending of income resulting from newly created direct and indirect jobs [16]. Since the employment to output ratio is given for each sector in an I-O table, the overall significance and contribution of an industry to total employment can also be calculated by assuming that the sectorial employment ratios are fixed. Thus, the indirect contribution of an industry to either total output or employment is not simply observable unless the multiplier and flow-on effects are taken into account. Therefore, the type I employment multiplier may be interpreted as the impact on the overall employment if the final demand in sector j increases by one unit. The employment multiplier for sector j, E mj , is thus defined as follows: 3.5 where ei denotes the number of persons with FTE per one Euro output for each sector i, bij is the i, j th element E e bj m i ij i n = = ∑ ( ) , 1 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 83 Carla Oliveira, Dulce Coelho and Patrícia Pereira da Silva of the closed Leontief inverse matrix and n is the number of sectors. These multipliers would represent the number of new jobs created expressed as total employment for every new employee to meet increased final demand of new output, but one may wish to relate the simple or total employment effect to an initial change in employment, not to final demand (and output) in monetary terms. In this situation the employment multiplier, Ej, is: 3.6 Finally, induced effects represent the response by all local industries caused by increased (decreased) expenditures of new household income and inter- industrial transfers generated (lost) from the direct and indirect effects of the change in final demand for a specific industry. Because the purpose of this type II employment multiplier is also to estimate the flows of money in and out of households and the effect of these transactions upon industries (i.e., the induced effect), it is necessary to ‘endogenise the household sector’. This consists on treating households as an additional industry by adding an extra row and column into the direct requirements table for ‘compensation of employees’ and ‘household expenditures’ coefficients, respectively. A short example of the application of this methodology in our study will be provided when grasping some illustrative results in section 5. 4. Implementation of the methodology in Portugal The building sector represents about 40% [17] and 30% [18] of total energy consumption in the European Union and Portugal, respectively. Therefore, the reduction of energy consumption in the building sector is an important measure for reducing the CO2 emissions and energy dependence [17]. According to the Energy Efficiency Plan (EEP) [19] the building sector offers the greatest energy saving potentials. The EEP is focussed on the instruments aimed at promoting the process of retrofit in public and private buildings and thus improving the energy performance of the components and appliances used in them. In Portugal, the first regulation related to energy performance and thermal comfort of buildings was endorsed in 1990 and required that new buildings and E e b ej i ij ji n = = ∑ ( ) 1 great refurbishments of existing buildings implemented measures to improve building energy performance. In the sequence of the previous European Directive on the energy performance of buildings [20] that was addressed to the Member States, a package of new regulation was enforced in Portugal in 2006 and is currently binding. In the building sector, the Portuguese legislation includes regulations regarding the energy and indoor air quality performance in buildings through the National System of Energy Certification and Indoor Air Quality in Buildings (SCE) [21], according to the requirements and statements contained in the Regulation of Building Conditioning of Energy Systems (RSECE) [22], and according to the Regulation of the Characteristics of Thermal Behaviour of Buildings (RCCTE) [23]. This new legislation package is stricter than the previous one and is either applicable to the new or older buildings needing great rehabilitation interventions. Therefore, the major potential for energy efficiency improvements exists in buildings, which have been constructed before 1990, when the first thermal insulation regulation was enacted. These buildings represent 71% of the existing building stock and 20% of this percentage have been constructed before 1945. In order to estimate the direct, indirect and induced employment effects associated with the implementation of energy efficiency retrofit investment in the Portuguese building sectors it was first necessary to use an I-O symmetrical product by product table for total flows. The I-O table herein used was also used in [24] and is given at current prices of 2008. Our analysis is focussed on buildings from the residential, private services and public services sector, considering two different construction stages: buildings dating back to 1945 and buildings constructed within the range of 1946 to 1990. Four key categories have been identified as important to be integrated into a retrofit project: window frames, window glazes and roof and wall insulation. The total investment costs associated with the implementation of the retrofit investments considered were first disaggregated to account for the economic sectors directly involved with each retrofit investment. Moreover, we assumed that the impact on employment regarding these interventions is expected to occur within the country. Fig. 1 depicts the sectoral distribution of the investment for each of the interventions herein tackled, which was based on several experts’ opinions 84 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 (academics and practitioners in the field of energy efficiency). The unit investment costs (at basic prices) are given in Table 1 and were estimated for 2008 (the base year of our study) and were based on [25] and [26] 5. Illustrative results The illustration of the methodology followed in section 4 will be performed for single glazed window replacement in single dwellings with four facades built before 1945, being analogous in the remaining retrofit investment options and therefore omitted. According to the building stock characterization provided in [27], the average window glazed area of this type of buildings is 17.2 m2 and the useful floor area is about 225 m2. Therefore, the total investment cost per building might be obtained through the costs provided in Table 1, corresponding to 1290 € and the total investment per useful floor space is 5.73 €. The coefficients for job generation are then obtained by considering the information regarding the activity sectors directly engaged with this retrofit measure (see Table 2 and Table 3 below). The results obtained in Table 3 are observable in the second row of Table 4. For an illustrative purpose we will only provide the sectoral distribution of the total estimated employment effects (direct, indirect and induced employment) for each energy efficient strategy in single dwellings with four facades, although this could be depicted for all types of buildings herein considered (see Fig. 2). If the option of single glazed window replacement is followed either with frames or not, the manufacturing industry contributes with the highest job generation potential, followed by construction. If the options of roof or wall insulation are privileged construction has the highest job generation potential followed by the manufacturing industry and services. After analysing the total results of Table 4 it might be concluded that the buildings with highest job generation potential belong to private and public services, International Journal of Sustainable Energy Planning and Management Vol. 02 2014 85 Carla Oliveira, Dulce Coelho and Patrícia Pereira da Silva Table 1: Unit costs of each retrofit measure. Year of construction Retrofit measure (€/m2) < 1945 1946–1990 Roof thermal insulation 18 13 Opaque facades 35 25 Double glazed windows 75 75 Window Frame 151 151 100%50%0% Chemical products Products from non- Basic metals Metallic products Construction Gross trade Retail trade Window frame Window glaze Roof insulation Wall insulation Figure 1: Sectoral distribution of each retrofit investment. Table 2: Data for computing job generation with single window glazing replacement in single dwellings with four facades built before 1945. Window Glaze Direct Employment Indirect Induced Investment Investment (€/1000 m2 Coefficients Employment Employment Activity Sectors Assignment useful floor space) (FTE jobs /106€) Coefficients Coefficients Chemical products 0% 0 3.6013 2.9391 6.5661 Products from non-metallic minerals 80% 4587 12.1864 1.8772 3.4555 Basic Metals 0% 0 3.9551 2.9546 6.2627 Metallic Products 0% 0 14.6715 1.5612 3.0656 Construction 15% 860 14.9514 1.9184 3.5698 Gross Trade 2% 115 14.4030 1.6539 3.4778 Retail Trade 3% 172 28.7788 1.2642 2.2322 involving the replacement of single by double glazed windows and with or without frame replacement. This fact occurs due to the higher extension of the glazed area in this type of buildings. In the residential sector the highest job impacts are obtained with external thermal insulation of the opaque facade in dwellings with four facades built before 1945, when the construction materials had lower quality levels. 86 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 Table 4: Employment impacts for each building type and retrofit measure (FTE/ 1000 m2 of useful floor space). Building Function Building Type N° of Facades Retrofit Investment Direct Jobs Indirect Jobs Induced Jobs Total Residential Single Dwelling 4 Window Frame 0.1268 0.1056 0.2225 0.4550 (<1945) Window Glaze 0.0754 0.0632 0.1173 0.2558 Facade Insulation 0.3472 0.3244 0.6241 1.2956 Roof Insulation 0.0914 0.0903 0.1740 0.3557 2 Window Frame 0.0737 0.0614 0.1294 0.2645 Window Glaze 0.0438 0.0368 0.0682 0.1487 Facade Insulation 0.2018 0.1886 0.3628 0.7533 Roof Insulation 0.0914 0.0903 0.1740 0.3557 Apartment Building, 4 Window Frame 0.1125 0.0937 0.1973 0.4034 3 floors Window Glaze 0.0668 0.0561 0.1040 0.2268 (1946–1990) Facade Insulation 0.1721 0.1608 0.3093 0.6421 Roof Insulation 0.0440 0.0435 0.0838 0.1712 2 Window Frame 0.0664 0.0553 0.1164 0.2381 Window Glaze 0.0394 0.0331 0.0614 0.1339 Facade Insulation 0.1015 0.0949 0.1825 0.3790 Roof Insulation 0.0440 0.0435 0.0838 0.1712 Private Services Apartment 4 Window Frame 0.9513 0.7922 1.6688 3.4124 Building, 3 floors Window Glaze 0.5652 0.4742 0.8794 1.9188 (<1945) Facade Insulation 0.2264 0.2115 0.4070 0.8450 Roof Insulation 0.0610 0.0602 0.1160 0.2371 Apartment Building, 2 Window Frame 0.5310 0.4422 0.9314 1.9046 4 floors Window Glaze 0.3154 0.2647 0.4908 1.0710 (1946–1990) Facade Insulation 0.0451 0.0422 0.0811 0.1684 Roof Insulation 0.0330 0.0326 0.0628 0.1284 Public Services Apartment Building, 4 Window Frame 0.3765 0.3136 0.6605 1.3506 3 floors (<1945) Window Glaze 0.2237 0.1877 0.3481 0.7595 Facade Insulation 0.0896 0.0837 0.1611 0.3344 Roof Insulation 0.0610 0.0602 0.1160 0.2371 Public Services Apartment Building, 4 Window Frame 0.3765 0.3136 0.6605 1.3506 3 floors (1946–1990) Window Glaze 0.2237 0.1877 0.3481 0.7595 Facade Insulation 0.0640 0.0598 0.1151 0.2389 Roof Insulation 0.0440 0.0435 0.0838 0.1712 Table 3: Direct, Indirect and Induced job generation for single window glazing replacement in single dwellings with four facades built before 1945 (FTE/ 1000 m2 of useful floor space). Activity Sectors Direct Employment Indirect Employment Induced Employment Chemical products 0.0000 0.00000 0.00000 Products from non-metallic minerals 0.0559 0.04903 0.08822 Basic Metals 0.0000 0.00000 0.00000 Metallic Products 0.0000 0.00000 0.00000 Construction 0.0129 0.01181 0.02123 Gross Trade 0.0017 0.00108 0.00301 Retail Trade 0.0049 0.00131 0.00479 TOTAL 0.0754 0.0632 0.1173 The prospective results for 2020 were obtained taking into account the necessary estimated retrofit investments per useful floor space according to the information provided in [26]. Fig. 3 illustrates the assignment per useful floor space of the retrofit measures that are expected to take place in the current building stock until 2020. The NEEAP incentives for the investment on the replacement of non-efficient glazed areas in the residential sector was herein considered, which accounts for 200 thousand dwellings until 2015. In addition, we have also considered the NEEAP incentives regarding thermal insulation (roof and facades), which considers 100 thousand dwellings to be refurbished until 2015. For the public and private service sectors we have considered that 39% of the total stock building area needs retrofit investment, where 3% of these are extremely damaged builds [26]. According to our assumptions, the useful floor space (in 1000 m2) possibly subject to a retrofit intervention from 2009 until 2020 is given in Table 5, corresponding to an expected maximum average annual investment of 13 321 million Euros in the residential buildings, 12 630 million Euros in private service buildings and 2 200 million Euros in public service buildings. The direct, indirect and induced employment totals (see Table 6) are then obtained by using the data provided in Table 4 and Table 5. From the last column of Table 6 it might be concluded that the energy efficiency retrofit measures with a higher impact on total employment are those related to single International Journal of Sustainable Energy Planning and Management Vol. 02 2014 87 Carla Oliveira, Dulce Coelho and Patrícia Pereira da Silva Window frames Primary sector 4% Extractive sector 1% Electricity and gas 0% Transports and communication 3% Accommodation and food services 4% Financial services and insurance 2% Real estate services 1% Natural water and sewarege 3% Manufacturing industry 29% Construction 10% Other services 27% Wholesale and retail trade 16% Window glaze Primary sector 4% Extractive sector 3% Electricity and gas 0% Transports and communication 4% Accommodation and food services 4% Financial services and insurance 2% Real estate services 1% Natural water and sewarege 1% Manufacturing industry 29% Construction 9% Other services 28% Wholesale and retail trade 15% Roof Primary sector 5% Extractive sector 0% Electricity and gas 0% Transports and communication 3% Accommodation and food services 4% Financial services and insurance 2% Real estate services 1% Natural water and sewarege 0% Manufacturing industry 14% Construction 25% Other services 28% Wholesale and retail trade 18% Facade Primary sector 4% Extractive sector 0% Electricity and gas 0% Transports and communication 4% Accommodation and food services 4% Financial services and insurance 2% Real estate services 1% Natural water and sewarege 1% Manufacturing industry 13% Construction 27% Other services 27% Wholesale and retail trade 18% Figure 2: Sectoral distribution of the total estimated employment effects for a single dwelling with four facades (considering 1000 m2 of useful floor space). 88 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 Table 6: Direct, indirect and induced job totals per each type of building and retrofit measure. Retrofit Direct Jobs Indirect Jobs Induced Jobs Total Building Function Building Type N° of Facades Investment (FTE) (FTE) (FTE) (FTE) Residential Single Dwelling 4 Window Frame 214 178 375 768 (<1945) Window Glaze 127 107 198 432 Facade Insulation 293 274 527 1093 Roof Insulation 77 76 147 300 2 Window Frame 124 104 218 446 Window Glaze 74 62 115 251 Facade Insulation 170 159 306 636 Roof Insulation 77 76 147 300 Apartment Building, 4 Window Frame 525 437 921 1883 3 floors (1946–1990) Window Glaze 312 262 485 1059 Facade Insulation 402 375 722 1499 Roof Insulation 103 101 196 400 2 Window Frame 310 258 544 1111 Window Glaze 184 154 286 625 Facade Insulation 237 221 426 885 Roof Insulation 103 101 196 400 Private Services Apartment Building, 4 Window Frame 951 792 1669 3412 3 floors (<1945) Window Glaze 565 474 879 1919 Facade Insulation 226 212 407 845 Roof Insulation 61 60 116 237 Table 5: Accumulated useful floor area for each retrofit measure (1000 m2). Building Function Building Type Windows Facades Roof Residential Single dwellings (<1945) 1687500 843750 843750 Residential Apartment Building, 3 floors (1946 – 1990) 4668750 2334375 2334375 Private services Apartment Building, 3 floors (<1945) 1000000 1000000 1000000 Private services Apartment Building, 4 floors (1946 – 1990) 2500000 2500000 2500000 Public services Apartment Building, 3 floors (<1945) 500000 500000 500000 Public services Apartment Building 3 floors (1946 – 1990) 500000 500000 500000 Windows Public services apartment building, 3 floors (1946-1990) 5% Residential single dwellings <45 15% Residential apartment building, 3 floors (1946-1990) 43% Private services apartment building, 3 floors (<1945) 9% Public services apartment building, 3 floors (<1945) 5% Private services apartment building, 4 floors (1946-1990) 23% Facades and roof Apartment building, 3 floors (1946-1990) 7% Single dwelling, (<1945) 11% Apartment building, 3 floors (<1945) 13% Apartment building, 3 floors (1946-1990) 30% Apartment building, 4 floors (1946-1990) 33% Apartment building, 3 floors (<1945) 6% Figure 3: Assignment of retrofit investments according to the useful floor space. Based on the Portuguese Energy Balance [18] and on the I-O table derived in [24] we have also obtained the expected avoided imports of primary energy according to the electricity production mix of the base year for each International Journal of Sustainable Energy Planning and Management Vol. 02 2014 89 Carla Oliveira, Dulce Coelho and Patrícia Pereira da Silva 400 386 Energy savings (GWh) 350 300 250 200 150 100 50 0 Window Facade Roof 339 112 350 334 Energy savings (GWh) 300 250 200 150 100 50 0 Window Facade Roof 339 112 Table 7: Energy reduction kWh/year/m2. Roof Window Window+frame Façade Buildings <1945 65.00 30.50 43.30 156.30 Buildings 1946–1990 65.00 43.10 50.50 28.70 glazed window replacement with or without frame substitution, except for older single dwellings where facade insulation has a higher contribution. This fact might be the result of the poor quality of the materials construction used in these older types of buildings. In order to obtain the possible negative impacts of energy efficiency savings on employment we have considered that the building heating and cooling systems are obtained from electric loads. This assumption does not comply with the recent building stock (particularly in the residential sector), but it is reasonable to assume that the building stock built before 1990 mainly uses electricity for space heating and cooling. The energy savings potential was computed through the consideration of the information provided in Table 7 which is based on [27]. Fig. 4 illustrates the total expected energy savings obtained for each retrofit measure taking into account the total heated area and the replacement of single by double glazed windows with and without frame replacement (upper side and lower side of Fig. 4). The corresponding electricity saved at basic prices of 2008 would be approximately of 472 millions of Euros (according to the data provided in the adjusted I-O matrix given in [24]). Table 6: Direct, indirect and induced job totals per each type of building and retrofit measure (Continued). Retrofit Direct Jobs Indirect Jobs Induced Jobs Total Building Function Building Type N° of Facades Investment (FTE) (FTE) (FTE) (FTE) Apartment Building, 2 Window Frame 1327 1105 2329 4761 4 floors Window Glaze 789 662 1227 2677 (1946–1990) Facade Insulation 113 105 203 421 Roof Insulation 83 81 157 321 Public Services Apartment Building, 4 Window Frame 188 157 330 675 3 floors (<1945) Window Glaze 112 94 174 380 Facade Insulation 45 42 81 167 Roof Insulation 30 30 58 119 Public Services Apartment Building, 4 Window Frame 188 157 330 675 3 floors (1946–1990) Window Glaze 112 94 174 380 Facade Insulation 32 30 58 119 Roof Insulation 22 22 42 86 Figure 4: Expected energy savings in GWh per retrofit measure. retrofit measure, taking into account the total heated area and the replacement of single by double glazed windows with and without frame replacement (left hand side and right hand side of Fig. 5). It is worth noting that only the direct impacts regarding the expected electricity savings have been herein considered. The computation of the avoided CO2 emissions has been obtained by considering the average emission factor of 0.369 of t CO2/MWh considered in [28], also taking into account the total heated area and the replacement of single by double glazed windows with and without frame replacement (left hand side and right hand side of Fig. 6). In this case only the direct impacts were accounted for. The data depicted in Table 8 was achieved considering a best and worst scenario regarding single glazed window replacement. On the upper side it can be observed the expected job generation with the replacement of single by double glazed windows and frames. On the lower side of this table, the expected job generation only with the replacement of single by double glazed window is presented. After analysing Table 8 it is possible to conclude that the retrofit measures tackled in this study have a great potential in job generation creating much more jobs than 90 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 120000 100000 80000 60000 40000 20000 0 Oil 47290 18599 29423 14329 Energy (10ˆ3Euros)Energy (toe) 100404 Avoided Energy Imports 94511 Natural gas Coal 8 100000 90000 80000 70000 60000 50000 30000 40000 20000 10000 0 Oil 44333 17436 27583 13433 Energy (10ˆ3Euros)Energy (toe) 94125 Avoided Energy Imports 88600 Natural gas Coal 777 77 Figure 5: Avoided imports of primary energy in tonnes of oil equivalent (toe) and at purchaser prices (103 Euros). 160000 142501 Avoided CO2 emissions (t) 140000 120000 100000 80000 60000 40000 20000 0 Window Facade Roof 125188 41394 140000 123171 Avoided CO2 emissions (t) 120000 100000 80000 60000 40000 20000 0 Window Facade Roof 125188 41394 Figure 6: Avoided CO2 emissions per retrofit measure in tonnes (t). Table 8: Net job creation until 2020 considering windows with or without frame replacement. Job Job Net Job creation destruction creation Direct jobs 5902 359 5543 Indirect Jobs 5155 2824 2331 Induced Jobs 10503 5426 5076 Total Jobs 21561 8609 12951 Average Jobs/year 1960 783 1177 Direct jobs 4348 337 4012 Indirect Jobs 3875 2647 1228 Induced Jobs 7326 5087 2239 Total Jobs 15550 8071 7479 Average Jobs/year 1414 734 680 the expected destruction by the energy savings accomplished. Nevertheless, it is worth noting that the rebound effect was not handled in this study. 6. Conclusions The main purpose of this study was to assess the impact of four specific energy efficiency retrofit measures on direct, indirect and induced jobs in several types of buildings, representing 71% of the building stock in Portugal. The measures chosen to perform the analysis involved the thermal insulation of roof and the opaque facades and the replacement of the existing glazed windows with more efficient ones. The difference of the results obtained by considering the replacement of frames in windows was slightly different regarding the opposite option. The first option allowed for lower levels of energy consumption and also higher levels of net job generation. This situation occurs because of the higher investment required for the implementation of this measure. Regarding the destruction of employment, both situations are identical although the first one generates slighter negative impacts. The target buildings belong to the residential, private services and public sectors and have been constructed before 1990, the year of the enactment of the first Portuguese regulation related to thermal performance of buildings. This study also highlights that energy efficiency investments have advantages over a set of other climatic alternatives, namely the increase of energy security and higher social benefits, because the electricity bill can be reduced, higher comfort levels can be attained and also because of its positive net impact on employment generation, what is in accordance with current European, and namely Portuguese, energy policy. Future work is currently under way in order to encompass other impacts of energy efficiency measures which allow providing a broader view of the employment effects of a global energy conservation plan for Portugal, combined with information on total energy savings directly and indirectly linked to this energy conservation plan; the corresponding effects on the Portuguese balance of payment as a consequence of that plan, eventual policy suggestions for its implementation and, finally, the estimation of the state budget effects, including positive effects of increased employment and increased incomes and reduced unemployment payments. Acknowledgments The authors would like to acknowledge FCT support under project grant PEst-C/EEI/UI0308/2011, the Energy for Sustainability Initiative of the University of Coimbra and the R&D Project EMSURE Energy and Mobility for Sustainable Regions (CENTRO 07 0224 FEDER 002004). References [1] Kaygusuz K, 2012. Energy for sustainable development: A case of developing countries. Renewable and Sustainable Energy Reviews 16, 1116–1126. [2] Cabinet Resolution n° 20/2013. Available at: https://dre.pt/pdf1sdip/2013/04/07000/0202202091.pdf (accessed: 06/01/2014) [3] Vitorino, L., Silva, P.P., Castro, N., 2012. “DSM policy measures impacts on macroeconomic indicators: the Brazilian policy context”, in Proceedings of the International Workshop on Energy Efficiency for a More Sustainable World, Ponta Delgada. [4] Lambert, R., Pereira da Silva. P. 2012. “The challenges of determining the employment effects of renewable energy”, Renewable and Sustainable Energy Reviews 16, 7: 4667 – 4674. doi: 10.1016/j.rser.2012.03.072 [5] Dacy, D.C., Kuenne, R.E., McCoy, P., 1979. Employment effects of energy conservation in the USA, 1978–1985. Energy Economics, 1 (4), 194–202. [6] Tiwari, P., J. Parikh, V. Sharma, 1996. Performance Evaluation of Cost Effective Buildings - A Cost, Emissions, and Employment Point of View. Building and Environment 31, 75–90. [7] Clinch, P., J. Healy, 2000. Cost-benefit analysis of domestic energy efficiency. Energy Policy 29, 113–124. [8] Scott, M., J. Roop, R. Schultz, D.Anderson, K. Cort, 2008. The impact of DOE building technology energy efficiency programs on U.S. employment, income, and investment. Energy Economics 30, 2283–2301. [9] Kuckshinrichs, W., T. Rosenberg, P. Hansen, 2010. The social return on investment in the energy efficiency of buildings in Germany. Energy Policy, 38, 4317–4329. [10] Ürge-Vorsatz, D. D. Arena, S. Herrero, A. Butcher, 2010. Employment impacts of a large-scale deep building energy retrofit programme in Hungary, Hungary, Central European University and the European Climate Foundation. Available at: http://3csep.ceu.hu/sites/default/files/field_attachment project/node-6234/employmentimpacts-publicpresentation- 08062010.pdf (accessed:12/01/2013) International Journal of Sustainable Energy Planning and Management Vol. 02 2014 91 Carla Oliveira, Dulce Coelho and Patrícia Pereira da Silva [11] Lehr, U, C. Lutz, M. Pehnt, U. Lambrecht, F. Seefeldt, M. Wünsch, B. Schlomann, T. Fleiter, 2011. 20% by 2020? Economy-wide impacts of energy efficiency improvement in Germany, GWS - Institute of Economic Structures Research, Discussion Paper 2. Available at: http://www.gws- os.com/discussionpapers/gws-paper11-2.pdf (accessed: 12/01/2013) [12] Billington, S., H. Pollitt, P. Summerton, L. Hayim, D. Price, P. Washan, 2012. Jobs, growth and warmer homes - Evaluating the economic stimulus of investing in energy efficiency measures in fuel poor homes. Final report for consumer focus, Cambridge Econometrics, Cambridge, UK. Available at: http://www.consumerfocus.org.uk/files/2012/ 11/Jobs-growth-and-warmer-homes-November-2012.pdf (accessed: 12/01/2013) [13] Burr, A., C. Majersik, S. Stellberg, H.Garrett-Peltier 2012. Analysis of job creation and energy cost savings from building energy rating and disclosure policy, Institute for Market Transformation and Political Economy Research Institute. Available at: http://sallan.org/pdf-docs/IMT_Benchmarking_ JobCreation.pdf (accessed: 12/01/2013) [14] International Energy Agency (IEA), 2009. Ensuring green growth in a time of economic crisis: The role of energy technology (Paris). Available at: http://www.iea.org/ publications/freepublications/publication/ensuring_green_gr owth-1.pdf (accessed: 12/01/2013) [15] Oliveira, C., Antunes, C. H., 2013. A multi-objective model for assessing the Impacts of energy efficiency measures on employment and GDP. Proceedings of the International Conference on Energy for Sustainability 2013, Coimbra. [16] Bell, C., 2012. Energy efficiency job creation: real world experiences, ACEE white Paper. Available at: http://www.aceee.org/files/pdf/white-paper/energy-efficiency- job-creation.pdf (accessed: 12/01/2013) [17] Directive n° 2010/31 EU. Available at: http://eur-lex. europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:153:0 013:0035:EN:PDF (accessed: 06/01/2014) [18] Directorate General for Energy and Geology. Available at: http://www.dgeg.pt/ (accessed: 15/10/2013) [19] Communication of the European Commission n° 109/2011. Available at: http://eur-lex.europa.eu/LexUriServ/ LexUriServ. do?uri=COM:2011:0109:FIN:EN:PDF (accessed: 06/01/2014) [20] Directive n° 2002/91/EC. Available at: http://eur-lex. europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2003:001:0 065:0071:EN:PDF (accessed: 6/01/2014) [21] Decree-law n° 78/2006. Available at: http://dre.pt/pdf1s/ 2006/04/067A00/24112415.pdf (accessed: 6/01/2014) [22] Decree-law n° 79/2006. Available at: http://dre.pt/pdf1s/ 2006/04/067A00/24162468.pdf (accessed: 6/01/2014) [23] Decree-law n° 80/2006. Available at: http://dre.pt/pdf1s/ 2006/04/067A00/24682513.pdf (accessed: 6/01/2014) [24] Oliveira, C., D. Coelho, Pereira da. Silva, C. H. Antunes, 2013. How many jobs can the RES-E sectors generate in the Portuguese context? Renewable and Sustainable Energy Reviews 21, 444–455. [25] Asadi, E., M. Silva, C. H. Antunes, L. Dias, 2012. Multio- objective optimization for building retrofit strategies: A model and an application, Energy and Buildings 44, 81–87. [26] Martins, B., C. Vital, D. Adão, F. Neves, L. Martins, M. Ramalho, F. Afonso, 2009. O Mercado da Reabilitação. Enquadramento, Relevância e Perspectivas, Associação de Empresas de Construção Obras Públicas e Serviços (AECOPS). Available at: http://prewww.aecops.pt/pls/ daecops3/WEB_EXTRACT_EXTERNAL.GET_EXTERNAL?c ode=29390781&col_ext=FILE1&tab=blist_downloads (accessed:12/01/2013) [27] Coelho, D. H., 2013. Decision Support in Integrated Urban Energy Planning. (in Portuguese), PhD thesis, University of Coimbra. [28] European Commission, 2010. How to develop a Sustainable Energy Action Plan (SEAP) – Guidebook. [online]. Luxembourg: Publication Office of the European Union. Available at: www.eumayors.eu/IMG/pdf/seap_guidelines _en.pdf (accessed 17/01/2014) 92 International Journal of Sustainable Energy Planning and Management Vol. 02 2014 A prospective analysis of the employment impacts of energy efficiency retrofit investment in the Portuguese building stock by 2020 << /ASCII85EncodePages false /AllowTransparency false /AutoPositionEPSFiles true /AutoRotatePages /All /Binding /Left /CalGrayProfile (Dot Gain 20%) /CalRGBProfile (sRGB IEC61966-2.1) /CalCMYKProfile (U.S. Web Coated \050SWOP\051 v2) /sRGBProfile (sRGB IEC61966-2.1) /CannotEmbedFontPolicy /Warning /CompatibilityLevel 1.4 /CompressObjects /Tags /CompressPages true /ConvertImagesToIndexed true /PassThroughJPEGImages true /CreateJDFFile false /CreateJobTicket false /DefaultRenderingIntent /Default /DetectBlends true /DetectCurves 0.0000 /ColorConversionStrategy /LeaveColorUnchanged /DoThumbnails false /EmbedAllFonts true /EmbedOpenType false /ParseICCProfilesInComments true /EmbedJobOptions true /DSCReportingLevel 0 /EmitDSCWarnings false /EndPage -1 /ImageMemory 1048576 /LockDistillerParams false /MaxSubsetPct 100 /Optimize true /OPM 1 /ParseDSCComments true /ParseDSCCommentsForDocInfo true /PreserveCopyPage true /PreserveDICMYKValues true /PreserveEPSInfo true /PreserveFlatness true /PreserveHalftoneInfo false /PreserveOPIComments false /PreserveOverprintSettings true /StartPage 1 /SubsetFonts true /TransferFunctionInfo /Apply /UCRandBGInfo /Preserve /UsePrologue false /ColorSettingsFile () /AlwaysEmbed [ true ] /NeverEmbed [ true ] /AntiAliasColorImages false /CropColorImages true /ColorImageMinResolution 300 /ColorImageMinResolutionPolicy /OK /DownsampleColorImages true /ColorImageDownsampleType /Bicubic /ColorImageResolution 300 /ColorImageDepth -1 /ColorImageMinDownsampleDepth 1 /ColorImageDownsampleThreshold 1.50000 /EncodeColorImages true /ColorImageFilter /DCTEncode /AutoFilterColorImages true /ColorImageAutoFilterStrategy /JPEG /ColorACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /ColorImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /JPEG2000ColorACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /JPEG2000ColorImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /GrayImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /JPEG2000GrayACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /JPEG2000GrayImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict << /K -1 >> /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False /Description << /CHS /CHT /DAN /DEU /ESP /FRA /ITA /JPN /KOR /NLD (Gebruik deze instellingen om Adobe PDF-documenten te maken voor kwaliteitsafdrukken op desktopprinters en proofers. De gemaakte PDF-documenten kunnen worden geopend met Acrobat en Adobe Reader 5.0 en hoger.) /NOR /PTB /SUO /SVE /ENU (Use these settings to create Adobe PDF documents for quality printing on desktop printers and proofers. Created PDF documents can be opened with Acrobat and Adobe Reader 5.0 and later.) >> /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ << /AsReaderSpreads false /CropImagesToFrames true /ErrorControl /WarnAndContinue /FlattenerIgnoreSpreadOverrides false /IncludeGuidesGrids false /IncludeNonPrinting false /IncludeSlug false /Namespace [ (Adobe) (InDesign) (4.0) ] /OmitPlacedBitmaps false /OmitPlacedEPS false /OmitPlacedPDF false /SimulateOverprint /Legacy >> << /AddBleedMarks false /AddColorBars false /AddCropMarks false /AddPageInfo false /AddRegMarks false /ConvertColors /NoConversion /DestinationProfileName () /DestinationProfileSelector /NA /Downsample16BitImages true /FlattenerPreset << /PresetSelector /MediumResolution >> /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ] >> setdistillerparams << /HWResolution [2400 2400] /PageSize [612.000 792.000] >> setpagedevice