# bib

id: jemmme-12551
author: Mustika, Vita; Triono, Agus; Wibowo, Koekoeh K.
title: Analysis of Screwed Shaft Failure using the Process Simulation of Loaded Torsion
date: 2020-09-18
pages: 4
extension: .pdf
mime: application/pdf
words: 1599
sentence: 102
flesch: 59
cache: cache/jemmme-12551.pdf
txt: txt/jemmme-12551.txt
summary:
  Flowchart 4. RESULTS AND DISCUSSION From the computer simulation, it can be obtained that the stress analysis report of physical and material of screwed shaft failure of the current model are appeared in table below: Screwed shaft with the type of steel construction machinery, the symbol S 30 C with the following specifications: Tensile strength 48 kg / mm2, elongation limit 29 kg / mm2, Hardness (Hs) 137-197 kg / mm2, Chemical Elements (%): C = 0.27-0.33, Si = 0.15-0.35, Mn = 0.60-0.90, P = 0.030, S = 0.035.


id: jemmme-4689
author: Choiron, Moch. Agus; Ida, Zumrotul; Purnowidodo, Anindito; Rivai, Ahmad
date: 2017-11-09
pages: 8
extension: .pdf
mime: application/pdf
words: 1933
sentence: 97
flesch: 57
cache: cache/jemmme-4689.pdf
txt: txt/jemmme-4689.txt
title:
  Energy Absorption and Deformation Pattern Analysis of Initial Folded Crash Box Subjected to Frontal Test

summary:
  Shell element has been used to mesh crash box model with element size of 1.3 mm. Through computer simulation using 9 models, the obtained result was used to provide the better design of crash box.


id: jemmme-5618
author: Himarosa, Rela Adi; Suyitno, Suyitno
title: Design, Fabrication, and Testing of Prototype of Total Lumbar Disc Replacement
date: 2018-06-30
pages: 6
extension: .pdf
mime: application/pdf
words: 1883
sentence: 118
flesch: 64
cache: cache/jemmme-5618.pdf
txt: txt/jemmme-5618.txt
summary:
  In this study, we constructed a new model of TDR implant, which is feasible to be mass- produced in Indonesia and performed static test to examine the mechanical properties of the new model. Marney also developed Prodisc-L® Figure 2.1b in France in 1989 which is first used in 1990 TDR implants should meet three criteria in order to be an effective implant.


id: jemmme-4902
author: Hendaryati, Heni; Mokhtar, Ali
title: Spider Web Shape of Brass Catalytic Converter for Reducing Exhaust Gas Emission
date: 2017-11-09
pages: 8
extension: .pdf
mime: application/pdf
words: 2183
sentence: 109
flesch: 54
cache: cache/jemmme-4902.pdf
txt: txt/jemmme-4902.txt
summary:
  CO2 (%) O2 (%) 1500 average 214.4 2.978 3.66 14.84 2000 average 228.0 2.874 3.40 15.52 2500 average 251.8 2.430 2.86 16.28 3500 average 260.6 3.330 3.68 14.22 JEMMME, Vol.2, No. 1, May 2017 ISSN 2541-6332 e-ISSN 2548-4281 JEMMME | Journal of Energy, Mechanical, Material, and Manufacturing Engineering 45 Table 3.2 Content of exhaust gas for catalytic converter installed exhaust system Engine rpm Data HC (ppm) CO (%) Keywords: spider web, brass, catalytic converter, gas emission 1.


id: jemmme-4904
author: Hariyadi, Eko; Jufri, Mohammad; Hasanuddin, Hasanuddin
title: Comparison of Corrosion Rate on Paint Coated and Uncoated SS400 Steel
date: 2017-11-09
pages: 6
extension: .pdf
mime: application/pdf
words: 2246
sentence: 111
flesch: 59
cache: cache/jemmme-4904.pdf
txt: txt/jemmme-4904.txt
summary:
  Corrosion rate in NaCl solution The data related to corrosion rate in 30% NaCl was given in Figure 3.2. It was found that the highest lost of mass was for unpolished uncoated one dipped in H2SO4 with corrosion rate of 4,566.06 mpy.


id: jemmme-5053
author: Wirawan, Willy Artha; Setyabudi, Sofyan Arief; Widodo, Teguh Dwi; Choiron, Moch. Agus
title: Surface Modification with Silane Coupling Agent on Tensile Properties of Natural Fiber Composite
date: 2017-12-28
pages: 8
extension: .pdf
mime: application/pdf
words: 2241
sentence: 113
flesch: 54
cache: cache/jemmme-5053.pdf
txt: txt/jemmme-5053.txt
summary:
  The purpose of this study is to modify biocomposite by adding methacryloxypropyltrimethoxysilane-coupling agent on waru bark fiber (Hibiscus tiliaceus) as an effort to improve tensile properties. The effort of this study is to improve tensile properties of waru bark fiber (Hibiscus tiliaceus) biocomposites by surface modification using methacryloxypropyltrimethoxysilane-coupling agent.


id: jemmme-4796
author: Caesarendra, Wahyu
date: 2017-11-09
pages: 8
extension: .pdf
mime: application/pdf
words: 2561
sentence: 132
flesch: 61
cache: cache/jemmme-4796.pdf
txt: txt/jemmme-4796.txt
title:
  A Method to Extract P300 EEG Signal Feature Using Independent Component Analysis (ICA) for Lie Detection

summary:
  Based on these problems, the EEG is examined as one of the alternative methods for lie detection, with the premise that EEG signals will be more difficult to fool than physiological responses to polygraphy. ICA is a method used in separating EEG signals from artefact estimation of a signal without the need for a reference channel.


id: jemmme-4478
author: Heltina, Desi
date: 2017-07-17
pages: 7
extension: .pdf
mime: application/pdf
words: 2403
sentence: 131
flesch: 52
cache: cache/jemmme-4478.pdf
txt: txt/jemmme-4478.txt
title:
  Modification of Carbon Nanotube for Synthesis of Titania Nanotube (Tint)-Carbon Nanotube (Cnt) Composite

summary:
  Percentage of highest degrading phenol of performance of TiNT-CNT (CTAB) composite was 38 % higher than the one of individual performance of TiNT dan CNT CTAB. Cetyl trimethyl ammonium bromide (CTAB) is one of surfactant from cationic type which could be used for modifying of CNT surface.


id: jemmme-4480
author: Zariatin, D.L
title: Analysis of Influence of Spindle Speed and Feeding Speed to Tool Wear and Surface Roughness
date: 2017-07-17
pages: 7
extension: .pdf
mime: application/pdf
words: 2566
sentence: 113
flesch: 58
cache: cache/jemmme-4480.pdf
txt: txt/jemmme-4480.txt
summary:
  Raya Lenteng Agung, Srengseng Sawah Jakarta Selatan Fax : (021)7270128 Email: dedeliazariatin@univpancasila.ac.id Abstract One of the problem in metal cutting is tool wear. Some theory on tool wear has been proposed, but still need verification thru experimental works to determine parameters and constants of tool life typical to machine tool condition and machining process.


id: jemmme-4898
author: Suprihanto, Agus
date: 2017-11-09
pages: 6
extension: .pdf
mime: application/pdf
words: 2602
sentence: 139
flesch: 47
cache: cache/jemmme-4898.pdf
txt: txt/jemmme-4898.txt
title:
  Evaluation The Effect Of HTGN Treatments On The Corrosion Resistance and Magnetic Properties Of Austenitic Stainless Steel 316L And 316LVM

summary:
  Increasing the nitrogen concentration produces higher corrosion resistance. Stainless steel for implant and medical devices such as 316L and 316LVM not only have to high corrosion resistance but also have to magnetic properties stabilities.


id: jemmme-11519
author: Sari, Nasmi Herlina; Suteja; Lelio, R.C.
date: 2021-11-09
pages: 6
extension: .pdf
mime: application/pdf
words: 2560
sentence: 152
flesch: 51
cache: cache/jemmme-11519.pdf
txt: txt/jemmme-11519.txt
title:
  Corrosion protection by sacrificial anode method on underground solar pipe installation: a case study in the Lombok Gas Engine Combine Cycle Power plant (Peaker) 130-150 MW

summary:
  Pipes that are planted in the soil experience corrosion on the surface due to the reaction of various minerals with metal pipes contained in the soil, and the fluid being flowed is corrosive [4]. ISSN 2541-6332 | e-ISSN 2548-4281 Journal homepage: http://ejournal.umm.ac.id/index.php/JEMMME Sari | Corrosion protection by sacrificial anode method on underground solar pipe ... 15 Corrosion protection by sacrificial anode method on underground solar pipe installation: a case study in the Lombok Gas Engine Combine Cycle Power plant (Peaker) 130-150 MW N.H. Sari a^, Sutejab,


id: jemmme-5711
author: Budiantoro, Cahyo; Nugroho, Adi
title: Effect of Mould and Melt Temperature on the Properties of Styrene Acrylonitrile Moulded Parts
date: 2018-06-30
pages: 8
extension: .pdf
mime: application/pdf
words: 2714
sentence: 138
flesch: 54
cache: cache/jemmme-5711.pdf
txt: txt/jemmme-5711.txt
summary:
  Influence of mould temperature on longitudinal shrinkage 3.2 Influence of melt temperature on experimental values Increase the barrel temperature will result in higher melt temperature. Influence of melt temperature on longitudinal shrinkage Increasing of melt temperature will decrease the longitudinal shrinkage due to less orientation degree, since the orientations have more time to relax and hence the remaining orientation in the part will be less.


id: jemmme-5027
author: Sindhu, Marcellinus
title: The Influence of Flooding Phenomenon to Pressure Drop on Hotleg Simulator with L/D=25
date: 2017-12-28
pages: 8
extension: .pdf
mime: application/pdf
words: 2836
sentence: 136
flesch: 54
cache: cache/jemmme-5027.pdf
txt: txt/jemmme-5027.txt
summary:
  Another definition of flooding was stated by Issa [5] as a condition when increase in air mass flow followed by stop of water flow carried by air flow partially or wholly. [2]) Installation of experiment was consisted of equipment to control water flow, equipment to control air, and equipment of testing section.


id: jemmme-5028
author: Ariawan, Radhi
date: 2017-12-28
pages: 8
extension: .pdf
mime: application/pdf
words: 2933
sentence: 129
flesch: 55
cache: cache/jemmme-5028.pdf
txt: txt/jemmme-5028.txt
title:
  Characteristic Study of Film Thickness on Countercurrent of Water-Air Flow in Hot-Leg Simulator of L/D = 25 by using Parallel-Wire Methods

summary:
  The decrease of film thickness was detected by sensor 7, in which JL was fixed and increase of JG until over of the flooding peed generated occurrence of film flow which up-down and finally goes to zero In this condition, valve connected to supply tank outlet was closed to prevent water flow out from tank.


id: jemmme-11928
author: Siregar, Salman Al Farisi; Triono, Agus; Darsin, Mahros; Mulyadi, Santoso
title: Measuring Feed Force in Machining Using a Strain Gage
date: 2021-06-07
pages: 6
extension: .pdf
mime: application/pdf
words: 2902
sentence: 193
flesch: 68
cache: cache/jemmme-11928.pdf
txt: txt/jemmme-11928.txt
summary:
  In this manuscript the term of feed force is used with the same meaning as cutting force. [4] conducts research on feed force using parameters such as the edge geometry of the tool affects the plowing force.


id: jemmme-4899
author: Fakhruddin, Muhammad; Choiron, Mochammad Agus; Purnowidodo, Anindito
date: 2017-11-09
pages: 8
extension: .pdf
mime: application/pdf
words: 2789
sentence: 169
flesch: 66
cache: cache/jemmme-4899.pdf
txt: txt/jemmme-4899.txt
title:
  THE INFLUENCE OF PROCESS PARAMETERS TOWARD COLLAR HEIGHT ON INCREMENTAL BACKWARD HOLE-FLANGING PROCESS

summary:
  Incremental forming process for producing prototype parts with round hole-flanges was studied [2]. Process parameter radial forming step size (Δx/y), P-value = 0.000 <


id: jemmme-11990
author: Wardoyo, Wardoyo; Widodo, Agung S.; Wijayanti, Widya; Wardana, I. N. G.
date: 2020-05-31
pages: 6
extension: .pdf
mime: application/pdf
words: 3190
sentence: 167
flesch: 49
cache: cache/jemmme-11990.pdf
txt: txt/jemmme-11990.txt
title:
  Experimental Investigation on Combustion Characteristics of Refine Corn Oil with Areca Catechu Extract as Additive

summary:
  This test is carried out by observing the burning characteristics of corn oil droplets and recording the rate of change in the center temperature of the droplet when it burns. Temperature evolution in the center of corn oil droplets.


id: jemmme-10492
author: Purwanto, Raden Edy; Hartono, Moh.; Widodo, Yuniarto Agus
title: Optimization of Spot Welding for Peel load on SPCC Steel Sheets
date: 2020-05-31
pages: 8
extension: .pdf
mime: application/pdf
words: 3250
sentence: 198
flesch: 69
cache: cache/jemmme-10492.pdf
txt: txt/jemmme-10492.txt
summary:
  The variation of voltage is determined in 2.30 V, 2.70 V and 3.20 V, while the variation of pressure time is determined in 3 seconds, 4 seconds and 5 seconds. No Revision http://dx.doi.org/10.22219/jemmme.v5i1.10492 JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol. 5, No. 1, May 2020 | doi: 10.22219/jemmme.v5i1.10492 Purwanto | Optimization of Spot Welding Joint toward Peel Load on SPCC steel … 55 material is welded by using spot welding method with voltage variation of 2.30V, 2.70V and 3.20V. The variation of pressure time for the spot welding is three seconds, 4 seconds, and 5 seconds.


id: jemmme-10602
title: Experimental Study on Mold-Lay Filament instead of Wax in Investment Casting Process
date: 2020-05-31
pages: 6
extension: .pdf
mime: application/pdf
words: 3048
sentence: 171
flesch: 54
cache: cache/jemmme-10602.pdf
txt: txt/jemmme-10602.txt
author:
  Kusyairi, Imam; Himawan, Helmy Mukti; Choiron, Moch. Agus; Irawan, Yudy Surya; Safari, Rachmat; Djuanda, Dagus Resmana

summary:
  One of them has been found mold-lay filament as a substitute for wax, which is now wax is one of the main components in investment casting process. The result show that mold-lay flutes are also able to come out well from slurry molds, but require more time than wax, this is because one of the plastic mold-lay compositions, which takes a long time for the moldlay fillment to come out of the mold.


id: jemmme-5029
author: Hartono, Samuel; Deendarlianto, Deendarlianto
date: 2017-12-28
pages: 10
extension: .pdf
mime: application/pdf
words: 3309
sentence: 146
flesch: 55
cache: cache/jemmme-5029.pdf
txt: txt/jemmme-5029.txt
title:
  Influence of Horizontal Pipe Length to Flooding of Counter Current of Water-Air Flow in Complex Pipe

summary:
  This condition makes air velocity flow above water phase become faster which followed by higher friction force on the interface of watre-air. In this research, the captured images wer showing of the position of onset of flooding for different value of L/D. In the Figure 3.2, it was presented that for higher L/D (horizontal pipe getting longer) and JL = 0.016 m/s the position of onset flooding was shifted toward leg of elbow.


id: jemmme-10221
author: Winoko, Yuniarto Agus; Arifin, Indra Nurzainu; Ro'isatin, Umi Anis
title: Analysis of the Mixture Fuels to the Performance of Diesel Engine
date: 2019-11-30
pages: 8
extension: .pdf
mime: application/pdf
words: 3366
sentence: 201
flesch: 58
cache: cache/jemmme-10221.pdf
txt: txt/jemmme-10221.txt
summary:
  This is due to biodiesel fuel B-20 having a cetane number > 50 so that shortening ignition delay and combustion is better than diesel fuel B-0 which has a cetane number 48 (13). The sulfur content in biodiesel fuel B-20 is lower than diesel fuel B-0.


id: jemmme-11968
author: Hariyadi, Setyo; Sutardi, Sutardi; Widodo, Wawan Aries; Pitoyo, Bambang Juni
title: Comparative Study of Forward Wingtip Fence and Rearward Wingtip Fence on Wing Airfoil Eppler E562
date: 2020-05-31
pages: 8
extension: .pdf
mime: application/pdf
words: 3463
sentence: 185
flesch: 60
cache: cache/jemmme-11968.pdf
txt: txt/jemmme-11968.txt
summary:
  In the wingtip region, rearward wingtip fence is less able to prevent the occurrence of fluid jumps from the lower side to the upper side than forward wingtip fence. this occurs in the plain wing and rearward wingtip fence but does not occur in the forward wingtip fence.


id: jemmme-12336
author: Kurniawati, Dini; Aisyah, Iis Siti
title: The Potent of Carrier Oil on Pretreatment of Crude Jatropha Curcas Oil
date: 2020-05-31
pages: 8
extension: .pdf
mime: application/pdf
words: 3326
sentence: 177
flesch: 51
cache: cache/jemmme-12336.pdf
txt: txt/jemmme-12336.txt
summary:
  In this research, the potential carrier oil testing was conducted to seek a way in improving the performance of Jatropha oil as lubricant oil, coolant or biodiesel. For this purpose, Jatropha oil was mixed with the other carrier oils in the variation of 0 – 45 %.


id: jemmme-11643
author: Vietanti, Frizka; Wang, Chen-Hao
date: 2020-09-18
pages: 8
extension: .pdf
mime: application/pdf
words: 3113
sentence: 165
flesch: 56
cache: cache/jemmme-11643.pdf
txt: txt/jemmme-11643.txt
title:
  PdFeCo Supported on N-rGO as a Bifunctional Catalyst for Methanol Oxidation and High Stability Oxygen Reduction Reaction

summary:
  A strong bonding of transition metals in Pd based catalyst can servemethanol tolerance and stability during ORR activity. A strong bonding of transition metals in Pd based catalyst can servemethanol tolerance and stability during ORR activity.


id: jemmme-4905
author: Hariyadi, Setyo
title: An analysis on Aerodynamics Performance Simulation of NACA 23018 Airfoil Wings on Cant Angles
date: 2017-11-09
pages: 10
extension: .pdf
mime: application/pdf
words: 3535
sentence: 187
flesch: 60
cache: cache/jemmme-4905.pdf
txt: txt/jemmme-4905.txt
summary:
  Mainly, winglet used for increasing aerodynamic efficiency, it decreases induced drag caused by vortex on wings tip. It is a unit of additional small wings attached on wing tip.


id: jemmme-4479
author: Jufri, Mohammad
title: The Effects of Transient Temperature around Welds on Mechanical Properties of A36 Steel Plate
date: 2017-07-17
pages: 11
extension: .pdf
mime: application/pdf
words: 3786
sentence: 173
flesch: 59
cache: cache/jemmme-4479.pdf
txt: txt/jemmme-4479.txt
summary:
  Meanwhile, in parent metal the hardness decreased, yet in the second spot and the next, there was a significant increase on the hardness level on heater temperature variation of 100°C, 200°C, and 300°C. Thus, if the material (steel) was applied higher temperature, the material strength will decrease.


id: jemmme-11879
author: Baharudin, Budi; Hakim, Rahman; Hidayat, Rahmat; Fikri, Mohammad Anas; Wilujeng, Auliana Diah
title: Preliminary Design of Wellhead Spacer Spool Based On the API Acceptance Criteria
date: 2021-04-26
pages: 10
extension: .pdf
mime: application/pdf
words: 3859
sentence: 240
flesch: 57
cache: cache/jemmme-11879.pdf
txt: txt/jemmme-11879.txt
summary:
  RESULT AND DISCUSSION 3.1 Internal Pressure Calculation Data and Acceptance Criteria Based on the calculation on Table 6, the obtained stress combination, 27,638psi still less than material yield stress 45,000psi, 60,000psi and 75,000psi. JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol.6, No. 1, 2021 doi: 10.22219/jemmme.v6i1.11879 Baharudin | Preliminary Design of Wellhead Spacer Spool Based on the … 22 To generate the rigidity acceptance criteria, we have to calculate: V, flange stress factor for integral type flanges; Mg flange design moment for the gasket seating condition; Mo, flange design moment for operating condition.


id: jemmme-12550
author: Nurdiansyah, Haidzar; A, M. Miftahul; Ridha, Fabrobi
title: Aluminum Combustion under Different Condition: A Review
date: 2020-09-18
pages: 8
extension: .pdf
mime: application/pdf
words: 4140
sentence: 288
flesch: 59
cache: cache/jemmme-12550.pdf
txt: txt/jemmme-12550.txt
summary:
  T. Bazyn, H. Krier, and N. Glumac, Evidence for the transition from the diffusion-limit in aluminum particle combustion, Proceedings of the Combustion Institute, vol. E. L. Dreizin, On the mechanism of asymmetric aluminum particle combustion, Combustion and Flame, vol. 117, pp.


id: jemmme-10428
author: Kaiser, Samiul; Kaiser, Mohammad Salim; Ahmed, Sheikh Reaz
date: 2020-03-07
pages: 10
extension: .pdf
mime: application/pdf
words: 4306
sentence: 241
flesch: 43
cache: cache/jemmme-10428.pdf
txt: txt/jemmme-10428.txt
title:
  Wear Behavior of Commercial Tire Rubber against Mild Steel in Dry, Wet and 3.5% NaCl Corrosive Environment

summary:
  In dry sliding wear of rubber, the primary wear mechanism is adhesive wear in which the worn surface layers adhere to the wear track. In dry sliding wear of rubber, the voids and holes parallel to the sliding direction are shown on the worn surface in dry sliding condition whereas in a wet and corrosive environment, wear tracks displayed are smoother.


id: jemmme-11675
author: Kaiser, Mohammad Salim
title: Fractional Recrystallization Behavior of Impurity-Doped Commercially Pure Aluminum
date: 2020-09-18
pages: 10
extension: .pdf
mime: application/pdf
words: 4210
sentence: 222
flesch: 41
cache: cache/jemmme-11675.pdf
txt: txt/jemmme-11675.txt
summary:
  Robson, J.D., “Microstructural evolution in aluminum alloy 7050 during processing”, Materials Science and Engineering A, Vol. 382, (2004), pp. Tajally, M., and Huda, Z., “Recrystallization kinetics for aluminum alloy 7075, Metal Science and Heat Treatment”, Vol. 53, No.5-6, (2011), pp. 213–217.


id: jemmme-11766
author: Fahriani, Vera Pangni; Setiawan, Reza; Hrdlička, František; Darmanto, Prihadi Setyo
date: 2021-09-26
pages: 14
extension: .pdf
mime: application/pdf
words: 5132
sentence: 275
flesch: 63
cache: cache/jemmme-11766.pdf
txt: txt/jemmme-11766.txt
title:
  Thermal Design Optimization of No Phase Change Shell-and-Tube Heat Exchanger using Particle Swarm Algorithm

summary:
  Equations for heat transfer in tube side have many forms. Components of heat exchanger are different depending on type shell and tube particularly.


id: jemmme-11226
author: Yusro, Muhammad; Martien, Ronnie
title: Investigating Fluid Parameters in Nanofiber Biomaterial Fabrication using Electrospinning
date: 2020-05-28
pages: 14
extension: .pdf
mime: application/pdf
words: 5674
sentence: 300
flesch: 51
cache: cache/jemmme-11226.pdf
txt: txt/jemmme-11226.txt
summary:
  The event resulted in the size of the fiber in high viscosity solutions having a larger size. Investigating Fluid Parameters in Fabricating Nanofiber Biomaterial using… 12 be categorized into three groups which are: set up parameters, solution parameters, and environmental parameters.


id: jemmme-5877
author: Fahruddin, A'rasy
title: Effect of Pipe Cutting Gap using CNC toward Surface Hardness
date: 2018-12-31
pages: 6
extension: .pdf
mime: application/pdf
words: 1752
sentence: 109
flesch: 61
cache: cache/jemmme-5877.pdf
txt: txt/jemmme-5877.txt
summary:
  Abstract This research concerned the standard value of surface roughness on Computer Numerical Control (CNC) to obtain fine pipe cutting result and is more useful for company to simply recognize the appropriate standard gap in designing. Based on the experiment, it shows that gap design for pipe with Computer Numeric Control (CNC) in 30 mm has less optimum result because its cutting result still has crust, the gap is still considered too close.


id: jemmme-19461
author: Mulyono, Mulyono; Mamungkas, M Irkham; Febrian, Candra Dwi
title: Design of Hollow Cone Water Gate with Hydraulic System in Karangkates Dam
date: 2021-12-30
pages: 4
extension: .pdf
mime: application/pdf
words: 1937
sentence: 125
flesch: 67
cache: cache/jemmme-19461.pdf
txt: txt/jemmme-19461.txt
summary:
  The hydrostatic pressure in hollow cone valve can be calculated with p equation [7]: p = ρ.g.h p is the hydrostatic pressure (N/m2), ρ is water density (1.000 kg/m3), g is gravity (m/s2), and h is the height of water pressure (m), p = 1.000 kg/m3 x 9,8 m/s2 x 38,85 m = 380.730 N/m2 = 38.832,6554 kg/m2 = 38,8 ton/m2 Open hollow cone valve In designing the hollow cone valve for Karangkates Dam, the material was determined to steel.


id: jemmme-5884
author: Choirotin, Ismi; Choiron, Moch. Agus
title: Defect Prediction at The Superplastic Forming Process of The Bipolar Plate by Simulation
date: 2018-06-30
pages: 6
extension: .pdf
mime: application/pdf
words: 1918
sentence: 84
flesch: 47
cache: cache/jemmme-5884.pdf
txt: txt/jemmme-5884.txt
summary:
  Simulate the fabrication of bipolar plate by a number of forming temperature (350 – 450 °C) and air pressure (0.25 – 1 MPa) utilize Ansys, resulting maximum thickness reduction and effective stress occurred at 450 °C and 1 MPa. Bipolar plate was very important as its function as a part that produces the electricity and as a frame where the fuel cell stack.


id: jemmme-5882
author: Sari, Yunita; Ma'arif, Mochammad Syamsul
title: Thermal Characteristic of Fire Resistance Electrical Cable for Residential Wiring Installation
date: 2018-06-30
pages: 6
extension: .pdf
mime: application/pdf
words: 2094
sentence: 106
flesch: 58
cache: cache/jemmme-5882.pdf
txt: txt/jemmme-5882.txt
summary:
  It consisted of DSC test, flame test, and current injection test. The test is intended to be standard for fire resistance cable.


id: jemmme-25229
author: Faishol, Ahmad; Mulyadi; Widodo, Edi
title: Capacity and power analysis on inclined screw conveyor using DEM simulation
date: 2023-07-13
pages: 6
extension: .pdf
mime: application/pdf
words: 2177
sentence: 116
flesch: 56
cache: cache/jemmme-25229.pdf
txt: txt/jemmme-25229.txt
summary:
  Screw conveyor simulation results with various variations S/N 1 2 3 4 5 6 7 8 9 Inclination 00 00 00 200 200 200 450 450 450 Speed (rpm) 50 75 100 50 75 100 50 75 100 Capacity (t/hr) Sebuah Kajian Pustaka: JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol.8, No. 1, 2023 ISSN 2541-6332 | e-ISSN 2548-4281 Journal homepage: http://ejournal.umm.ac.id/index.php/JEMMME Faishol | Capacity and power analysis on inclined screw conveyor using DEM… 1 Capacity and power analysis on inclined screw conveyor using DEM simulation Ahmad Faishola, Mulyadia, Edi Widodoa a Mechanical Engineering, Universitas Muhammadiyah Sidoarjo Jl.


id: jemmme-20669
author: Jufri, Mohammad; Ginola, Yeshar Ego; Hendaryati, Rr. Heni ; Saifullah, Ali; Daryono
date: 2022-09-15
pages: 6
extension: .pdf
mime: application/pdf
words: 2288
sentence: 120
flesch: 61
cache: cache/jemmme-20669.pdf
txt: txt/jemmme-20669.txt
title:
  The Effect of Electroplating Hard Chrome with Different Dissolvent Compositions to the Mechanical Properties of ST-37

summary:
  Electroplating hard chrome is a metal plating process with hard chrome which aims to not only coat as decorative, but also to coat metal surfaces more strongly, according to their use in the engineering world. In this research, hard chrome electroplating process will be carried out.


id: jemmme-5761
author: Sastrowiyono, Supriyono
date: 2018-06-30
pages: 8
extension: .pdf
mime: application/pdf
words: 2694
sentence: 186
flesch: 69
cache: cache/jemmme-5761.pdf
txt: txt/jemmme-5761.txt
title:
  The Effect of the Ball Size on the Product Characteristics of Shaker HEBM to Produce Nano Particle from Bamboo Charcoal

summary:
  The characteristics of the particle are represented by particle size, surface morphology, and the substances presence in the product. PSA results indicate that there is no certain correlation between the steel ball size and particle size.


id: jemmme-9931
author: Irawan, Yosua Heru; Harianto, Harianto
date: 2019-11-30
pages: 6
extension: .pdf
mime: application/pdf
words: 3434
sentence: 152
flesch: 59
cache: cache/jemmme-9931.pdf
txt: txt/jemmme-9931.txt
title:
  Numerical Simulation of The Effect of Wind Velocity on The Diffuser Augmented Wind Turbines Performance

summary:
  The general theory of disk actuators that have long been used for mathematical modeling of wind turbine performance is used to model DAWT with the addition of several empirical equations (3). Simulations are carried out at low, medium, and high wind speeds to determine the increase in wind turbine performance with the addition of a diffuser.


id: jemmme-8781
author: Effendi, Riki; Maghfurah, Fadwah
date: 2019-11-30
pages: 10
extension: .pdf
mime: application/pdf
words: 2720
sentence: 164
flesch: 57
cache: cache/jemmme-8781.pdf
txt: txt/jemmme-8781.txt
title:
  Strength Analysis of Steel Construction and Swing Hanger Using Theoretical Method and Simulation of Finite Element

summary:
  The study focused on the stress analysis of the test material to determine and classify the test material with SNI reference which applies as a condition for the application of test material to a construction. Furthermore, the initial data of the swing hanger test material as well as steel construction were carried out modeling by using a solidworks computer work program application.


id: jemmme-5825
author: Darsin, Mahros; Pasang, Timotius; Chen, Zhan
title: Forces Perspective of Drillability of Titanium Alloy 6Al-2Sn-4Zr-6Mo
date: 2018-06-30
pages: 8
extension: .pdf
mime: application/pdf
words: 3307
sentence: 218
flesch: 69
cache: cache/jemmme-5825.pdf
txt: txt/jemmme-5825.txt
summary:
  Cutting force (Fc) and feed force (Fk) have been discussed on machining three kind of titanium alloys Ti-6Al4V, Ti-54M and Ti-10.2.3 with variation in machining parameters. This paper concerns on drillability of Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) from the point view of thrust force (Fz) & torque (Mz) using a TiAlN CVD coated carbide tool.


id: jemmme-26425
author: Nugroho, Gunawan; Sasongko, Herman; Adenan, Mohammad; Sarwono; Mirmanto, Heru
title: A CFD analysis of NACA 0015 airfoil as a horizontal stabilizer with gap length variations
date: 2023-06-15
pages: 8
extension: .pdf
mime: application/pdf
words: 2650
sentence: 170
flesch: 60
cache: cache/jemmme-26425.pdf
txt: txt/jemmme-26425.txt
summary:
  Moreover, the lift coefficient is 1.83 for 10-degree horizontal stabilizer (gap length 2%). Pressure contour of 2° AoA (1) DF 16°; (2) DF 20° and gap length (a) 1.75%; (b) 2%; (c) 2.25% a) Elevator Deflection of 16°


id: jemmme-8531
author: Saifullah, Ali; Reynaldi, Ferdian; Aisyah, Iis Siti; Heri Soegiharto, Achmad Fauzan
title: The Effect of Heat Treatment on Hardness and Microstructure of Al-Cu Squeeze Casting Product
date: 2019-05-30
pages: 6
extension: .pdf
mime: application/pdf
words: 2500
sentence: 141
flesch: 25
cache: cache/jemmme-8531.pdf
txt: txt/jemmme-8531.txt
summary:
  Heat treatment followed by quenching process significantly increase the hardness, it is because of the more solid and smaller granular shape due to quenching Keywords: Al-Cu; hardness test; heat treatment, squeeze casting 1. E-mail: siti@umm.ac.id Abstract This research was conducted with the purpose of knowing the change mechanical properties of Al - Cu squeeze casting product which applied heat treatment and quenching.


id: jemmme-4475
author: Rusnaldy, Rusnaldy
title: Analysis of the Damage of Boiler Bottom Slope Pipe in Steam Power Plant
date: 2017-07-17
pages: 7
extension: .pdf
mime: application/pdf
words: 2550
sentence: 146
flesch: 56
cache: cache/jemmme-4475.pdf
txt: txt/jemmme-4475.txt
summary:
  Simulation results also confirmed that the initial assumption on cause of pipe damage from foreign object, which is small size slag that felt from very high location so that caused high speed impact on pipe. Thermal analysis result also supporting the suspicion that slag impact on pipe was occurred in temperature under recrystallization of pipe material.


id: jemmme-9514
author: Budiono, Budiono; Suwarsono, Suwarsono
title: Inspection on Railroads Quality by using Image Processing Method
date: 2019-11-30
pages: 8
extension: .pdf
mime: application/pdf
words: 2572
sentence: 143
flesch: 62
cache: cache/jemmme-9514.pdf
txt: txt/jemmme-9514.txt
summary:
  Result of railroads surface measurement by using image processing is averagely 3.61311 mm height and 55.6000 mm width. Output of image processing is graphic of the railroads surface that is analyzed to obtain its quality from its flatness.


id: jemmme-8668
author: Riyadi, Sugeng; Setaji, Yogi; Pamekas, Hansyah Faisal; Setiawan, Reza
title: Design of Hybrid Smokeless Waste Burners Machine for Producing Organic Fertilizer
date: 2019-11-30
pages: 10
extension: .pdf
mime: application/pdf
words: 2345
sentence: 132
flesch: 58
cache: cache/jemmme-8668.pdf
txt: txt/jemmme-8668.txt
summary:
  Water scrubber technology design From the Figure 6, water scrubber technology is used to filter smoke using water. Combustion smoke can be cleaned with water scrubber technology where is spraying water from sprinkles filter to entire region that smoke is flowed.


id: jemmme-25512
author: Susilo, Bayu; Nurrohkayati, Anis Siti; Pranoto, Sigiet Haryo; Nugroho, Andi
title: Prototype of the chopping machine for the fronds and leaves of oil palms
date: 2023-06-12
pages: 6
extension: .pdf
mime: application/pdf
words: 3085
sentence: 147
flesch: 67
cache: cache/jemmme-25512.pdf
txt: txt/jemmme-25512.txt
summary:
  The results of chopped palm fronds and leaves that have been chopped and are considered large enough will be filtered and then chopped again. Chopped oil palm leaves It can be seen in the picture that the chopped results of oil palm leaves can be chopped finely, and the fronds of the oil palm are also finely chopped.


id: jemmme-4474
author: Mahmudah, Aida
title: Development and Measurement of 5 kN &micro;-Forming Machine
date: 2017-07-17
pages: 9
extension: .pdf
mime: application/pdf
words: 3038
sentence: 163
flesch: 55
cache: cache/jemmme-4474.pdf
txt: txt/jemmme-4474.txt
summary:
  [3] made protoype of micro-forming machine with maximum capacity of 20 kN, and maximum speed of 1200 stroke/minutes. [7] develop micro-forming machine with capacity of 8.8 kN and having positional resolution of 0.12 µm.


id: jemmme-4477
author: Aisyah, Iis Siti
title: The effect of Chamfer to the Tensile Strength of Steel Jis S45cr Friction Welding Joints
date: 2017-07-17
pages: 6
extension: .pdf
mime: application/pdf
words: 2360
sentence: 96
flesch: 64
cache: cache/jemmme-4477.pdf
txt: txt/jemmme-4477.txt
summary:
  Based on the welding process, the performance of the friction welding on weld metal that has been tensile tested has a perfect point, where it is able to increase the joints on steel JIS S45Cr friction welding, so the fracture position moves into HAZ area. It is proved that the chamfer length effect to thee tensile strength of friction welding.


id: jemmme-4476
author: Whulanza, Yudan
title: Realitization and Testing of Mini Extruder for Biomaterial Filament in Biomedical Application
date: 2017-07-17
pages: 6
extension: .pdf
mime: application/pdf
words: 2481
sentence: 144
flesch: 57
cache: cache/jemmme-4476.pdf
txt: txt/jemmme-4476.txt
summary:
  On the other hand, the largest diameter 1.48mm is produced by speed screw 100% and filament winding of 2000 RPM. Figure 3.5 shows that the filament’s diameter tends to increase with increasing of rotational speed screw.


id: jemmme-8435
author: Ma'arif, Moch. Syamsul; Cook, Christopher David
title: Performance of Non-rotating Shoulder Tool in Weld Joint and Forces of Friction Stir Welding
date: 2019-05-30
pages: 10
extension: .pdf
mime: application/pdf
words: 2931
sentence: 126
flesch: 44
cache: cache/jemmme-8435.pdf
txt: txt/jemmme-8435.txt
summary:
  9. Cederqvist, L., Garpinger, O., H¨agglund, T., Robertsson, A. Cascade control of the friction stir welding process to seal canisters for spent nuclear fuel, Control Engineering Practice, 2010, 20, pp. 35-48. https://www.researchgate.net/publication/267505598_Laser-Assisted_Friction_Stir_Lap_Welding_of_Aluminum https://www.researchgate.net/publication/267505598_Laser-Assisted_Friction_Stir_Lap_Welding_of_Aluminum https://www.researchgate.net/publication/267505598_Laser-Assisted_Friction_Stir_Lap_Welding_of_Aluminum https://www.researchgate.net/publication/267505598_Laser-Assisted_Friction_Stir_Lap_Welding_of_Aluminum https://www.aluminum.org/?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfmhttp://www.aluminum.org/AM/Template.cfm?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfm https://www.aluminum.org/?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfmhttp://www.aluminum.org/AM/Template.cfm?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfm https://www.aluminum.org/?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfmhttp://www.aluminum.org/AM/Template.cfm?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfm https://www.aluminum.org/?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfmhttp://www.aluminum.org/AM/Template.cfm?Section=Home&CONTENTID=22762&TEMPLATE=/CM/ContentDisplay.cfm https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=2ahUKEwi_8tao9L_iAhUFOSsKHSuuBo8QFjAGegQICBAC&url=http%3A%2F%2Fwww.fswsymposium.co.uk%2FEasySiteWeb%2FGatewayLink.aspx%3FalId%3D1238961&usg=AOvVaw3CaajtUxrG9Y1emopCSP6a https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=2ahUKEwi_8tao9L_iAhUFOSsKHSuuBo8QFjAGegQICBAC&url=http%3A%2F%2Fwww.fswsymposium.co.uk%2FEasySiteWeb%2FGatewayLink.aspx%3FalId%3D1238961&usg=AOvVaw3CaajtUxrG9Y1emopCSP6a https://www.researchgate.net/publication/226186791_The_hot_deformation_of_aluminum_alloys https://www.researchgate.net/publication/226186791_The_hot_deformation_of_aluminum_alloys https://www.sciencedirect.com/science/article/pii/S0261306911008478 https://www.sciencedirect.com/science/article/pii/S0261306911008478 https://www.sciencedirect.com/science/article/pii/S0261306911008478 https://www.sciencedirect.com/science/article/pii/S0263224106002636 https://www.sciencedirect.com/science/article/pii/S0263224106002636 https://page-one.springer.com/pdf/preview/10.1007/s10720-005-0021-0 https://page-one.springer.com/pdf/preview/10.1007/s10720-005-0021-0 https://page-one.springer.com/pdf/preview/10.1007/s10720-005-0021-0 https://page-one.springer.com/pdf/preview/10.1007/s10720-005-0021-0 https://page-one.springer.com/pdf/preview/10.1007/s10720-005-0021-0 https://www.scribd.com/doc/63559781/Carslaw-and-Jaeger-Conduction-of-Heat-in-Solids-1959-ISBN-0198533683 https://www.scribd.com/doc/63559781/Carslaw-and-Jaeger-Conduction-of-Heat-in-Solids-1959-ISBN-0198533683 https://www.sciencedirect.com/science/article/abs/pii/S0967066111001845 https://www.sciencedirect.com/science/article/abs/pii/S0967066111001845 https://www.sciencedirect.com/science/article/abs/pii/S0967066111001845 JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol.4, No. 1, May 2019 Ma’arif | Performance of Non-rotating Shoulder Tool in Weld Joint and Forces of ... 56 10. Since decrease in welding forces after 300 0C is not significant, it is wise to not to increase initial temperature too high during oxidation and other chemical reaction may occurred.


id: jemmme-25570
date: 2023-08-01
pages: 8
extension: .pdf
mime: application/pdf
words: 3251
sentence: 206
flesch: 63
cache: cache/jemmme-25570.pdf
txt: txt/jemmme-25570.txt
author:
  Budiarto, Balla Wahyu; Wirawan, Willy Artha; Rozaq, Fadli; Rachman, Natriya Faisal; Oktaria, Dhina Setyo

title:
  Effect of fiber length on tensile strength, impact toughness, and flexural strength of Banana Stem Fiber (BSF)-polyester composite for train body

summary:
  Sebuah Kajian Pustaka: JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol. 8, No. 1, 2023 ISSN 2541-6332 | e-ISSN 2548-4281 Journal homepage: http://ejournal.umm.ac.id/index.php/JEMMME Budiarto | Effect of fiber length on tensile strength, impact toughness, and flexural… 7 Effect of fiber length on tensile strength, impact toughness, and flexural strength of Banana Stem Fiber (BSF)-polyester composite for train body Balla Wahyu Budiartoa, Willy Artha Wirawanb, Fadli Rozaqc, Natriya Faisal Rachmand, Dhina Setyo Oktariae a,b,cRailway Mechanics Technology, Indonesian Railway Polytechnic, Tirta Raya street, Pojok, Nambangan Lor, Manguharjo, Madiun, Indonesia 63161 d,eRailway Electrical Technology, Indonesian Railway Polytechnic, Tirta Raya street, Pojok, Nambangan Lor, Manguharjo, Madiun, Indonesia 63161 e-mail: balla@ppi.ac.id, willy@pengajar.ppi.ac.id Abstract Fiber length has no significant effect on the flexural strength of the BSF composite.


id: jemmme-5070
author: Kusyairi, Imam
date: 2017-12-28
pages: 8
extension: .pdf
mime: application/pdf
words: 2577
sentence: 181
flesch: 60
cache: cache/jemmme-5070.pdf
txt: txt/jemmme-5070.txt
title:
  The Influence of Origami and Rectangular Crash Box Variations on MPV Bumper with Offset Frontal Test Examination toward Deformability

summary:
  Simulation test modeled with impactor, bumper and crash box, while offset frontal test with 16 km/h impact speed conducted using material bilinear isotropic hardening modeling. Keywords: crash box; origami; MPV Car; deformation 1.


id: jemmme-23086
author: Nusyirwan; Rani, Mutya; Pratama, Rully
title: Identification of the fracture surface of thermoset polyester due to bending load
date: 2022-11-25
pages: 8
extension: .pdf
mime: application/pdf
words: 3614
sentence: 243
flesch: 57
cache: cache/jemmme-23086.pdf
txt: txt/jemmme-23086.txt
summary:
  In this study, the mechanical properties of the polyester polymer were strengthened by mixing with vinyl ester polymer to obtain a mixture of two polymer materials that have good mechanical properties from pure polyester polymer (13)(3)(14). The deformation mechanism of polyester material by mixing it with vinyl ester and MMA can increase the plastic deformation of the brittle nature of pure polyester.


id: jemmme-5880
author: Kurniawati, Dini
title: Effect of Alkaline Metal Catalyst to Transesterification of Jatropha Curcas oil
date: 2018-06-30
pages: 12
extension: .pdf
mime: application/pdf
words: 4148
sentence: 277
flesch: 59
cache: cache/jemmme-5880.pdf
txt: txt/jemmme-5880.txt
summary:
  Graphic 3.3a, b and c shows that methyl esters content increases with the increment of transesterification reaction temperature. Yet, in 70oC, methyl esters content is decreasing as transesterification reaction temperature above methanol boiling point.


id: jemmme-9698
author: Adriant, Ziani; Yulianto, Yulianto; Förster, Ralf; Zariatin, Dede Lia
title: The Effect of Mesh Size on Mechanical and Thermal Properties of Bamboo Composites
date: 2019-11-30
pages: 10
extension: .pdf
mime: application/pdf
words: 3695
sentence: 202
flesch: 60
cache: cache/jemmme-9698.pdf
txt: txt/jemmme-9698.txt
summary:
  Composite materials have advantages compared to metal materials which are better corrosion resistance compared to metals and for certain composite materials have better strength and stiffness The development of composite materials is not only based on synthetic fibers, but natural fibers can be used as a substitute for synthetic composites and make it a renewable natural composite. Mesh size of 20 has the best thermal conductivity where the value is 7.36 W/m.oC. Cool-box testing on mesh 20, 30, 40 compared with the same dimensions was given box styrofoam with a temperature of -2 oC.


id: jemmme-9742
author: Ahmed, Yassin Mustafa; Lafta, Hameed D.; Abdulrahman, Azhin Abdullah
date: 2019-11-30
pages: 10
extension: .pdf
mime: application/pdf
words: 3683
sentence: 182
flesch: 53
cache: cache/jemmme-9742.pdf
txt: txt/jemmme-9742.txt
title:
  Study the durability of welding and performance of base metal of L. P. G. home cylindrical manufactured in Kurdistan region.

summary:
  The experiments were carried out on three types of LPG cylinder using in Kurdistan regions A, B, and C and an unformed plate. To carried out the samples and tests during the research we depending on the standard tests for LPG cylinders.


id: jemmme-5054
title: Performance of Porous-Venturi Microbubble Generator for Aeration Process
date: 2017-12-28
pages: 8
extension: .pdf
mime: application/pdf
words: 3162
sentence: 179
flesch: 50
cache: cache/jemmme-5054.pdf
txt: txt/jemmme-5054.txt
author:
  Afisna, Lathifa Putri; Juwana, Wibawa Endra; Indarto, Indarto; Deendarlianto, Deendarlianto; Nugroho, Fellando Martino

summary:
  Change on water debit will influence bubble size distribution. Hereinafter, probability curve of bubble size distribution in this range increase in line with the increment of water debit.


id: jemmme-5111
author: Suwarsono, Suwarsono; Budiono, Budiono
title: Water Turbine Simulation using Autodesk Simulation CFD
date: 2017-12-28
pages: 6
extension: .pdf
mime: application/pdf
words: 2068
sentence: 129
flesch: 61
cache: cache/jemmme-5111.pdf
txt: txt/jemmme-5111.txt
summary:
  Water power can be calculated with the formulation: Dair = . Water turbine or Water-sourced Power Plant is primary mechanism except generator.


id: jemmme-19828
date: 2022-09-15
pages: 12
extension: .pdf
mime: application/pdf
words: 4086
sentence: 279
flesch: 47
cache: cache/jemmme-19828.pdf
txt: txt/jemmme-19828.txt
author:
  Sutarno; Widyanto, Bambang; Syuryana, E.P.; Wahyudi, Soleh; Bayan, Fikri Septian Nurul; Rachma, Camalia Bani; Pratama, Gusti Verhan; Riskamti; Muwaffaq, Ariq Akmal

title:
  Optimization of the Effect of Electropolishing's Current Density and Time on Roughness, Microstructure and Corrosion Resistance

summary:
  Flowcharts The series of electropolishing processes as presented in Figure 5. Flowchart of electropolishing process Part of pharmaceutical equipment before electropolishing Measurement of component roughness Electropolishing Emersion of elements Rinsing Roughness Pickling and rinsing Grinding and polishing Rinsing on H2SO4 Rinsing Hot rinsing Roughness measurement


id: jemmme-8222
author: Nugroho, Aris Widyo; Budiantoro, Cahyo
title: Improving the tensile properties of 3D printed PLA by optimizing the processing parameter
date: 2019-05-30
pages: 8
extension: .pdf
mime: application/pdf
words: 3860
sentence: 198
flesch: 42
cache: cache/jemmme-8222.pdf
txt: txt/jemmme-8222.txt
summary:
  This research focuses on the influence of parameter process on mechanical properties of the PLA products being fabricated by using Prusa I3 3D printer using Repetier-Host software. The value of each level of process parameters used in this study is derived from PLA data sheet material, pre-experiments and from previous research literature studies.


id: jemmme-19827
author: Farrasandi, Farhan Adi; Sasmita, Firmansyah; Ardy, Husaini
title: The Effect of Copper (II) Nitrate Addition and Tensile Stress on SCC of C44500 Material Tube
date: 2021-12-19
pages: 14
extension: .pdf
mime: application/pdf
words: 4705
sentence: 247
flesch: 54
cache: cache/jemmme-19827.pdf
txt: txt/jemmme-19827.txt
summary:
  Besides, observation was also for non-dezincified specimen, labeled as number 12 with highest tensile stress applied. 6. S. Fernández, Corrosion Science, Corrosion SciencePassivity Breakdown and Stress Corrosion Cracking of α-brass in Sodium Nitrate, pp. 1643-1652, 2005.


id: jemmme-17780
author: Bagus Prasetiyo, Angger; Sekarjati, Kartinasari Ayuhikmatin ; Tontowi, Alva Edy
date: 2021-12-17
pages: 8
extension: .pdf
mime: application/pdf
words: 3408
sentence: 203
flesch: 58
cache: cache/jemmme-17780.pdf
txt: txt/jemmme-17780.txt
title:
  Application of RSM Method in Optimization of 3D Printing Machine Process Parameters Using Biocomposite Materials (PMMA/Hydroxyapatite) to Get the Highest Tension Strength

summary:
  This data is used as a reference for 3D printing machine parameter settings for specimen printing in order to achieve the best tensile strength. This research mixed PMMA material with hydroxyapatite (HA) material.


id: jemmme-19250
author: Ramadhan, Zaid Al Kahfi; Yamin, Mohamad
title: Prediction Coefficient of Pressure and Wall Friction for Turbulent Flow over a Backward Facing Step
date: 2021-12-20
pages: 8
extension: .pdf
mime: application/pdf
words: 2551
sentence: 151
flesch: 55
cache: cache/jemmme-19250.pdf
txt: txt/jemmme-19250.txt
summary:
  This study focuses on the prediction of Cp and Cf on BFS flow using Machine Learning. Various applications for BFS flow can be found in everyday life, such as airfoils, spoiler flows, flow separators behind vehicles, as well as flows around ships or buildings.


id: jemmme-7092
author: Winardi, Yoyok; Munaji, Munaji
title: Failure Analysis of Brake Panel on Automotive Braking System
date: 2019-05-30
pages: 6
extension: .pdf
mime: application/pdf
words: 2199
sentence: 196
flesch: 37
cache: cache/jemmme-7092.pdf
txt: txt/jemmme-7092.txt
summary:
  Keywords: brake panel; failure analysis; stress concentration 1. Commonly brake panel is made from aluminum alloys.


id: jemmme-7093
author: Winarno, Rudi; Daryono, Daryono; Jufri, Moh.
title: The Influence of Welding Ampere Range to ST-40 Shear Strength with Butt Joint
date: 2018-12-31
pages: 6
extension: .pdf
mime: application/pdf
words: 1957
sentence: 127
flesch: 65
cache: cache/jemmme-7093.pdf
txt: txt/jemmme-7093.txt
summary:
  On the other hand, the higher ampere range on welding process results higher shear strength. Many factors can influence welding result [1], namely method and procedure of welding, equipment, materials needed, electrode, ampere range applied, seam distance, and seam angle applied [2][3].


id: jemmme-19082
author: Sari, Dewi Puspita; Arifin, Amir; Gunawan, Gunawan; Adanta, Dendy; Asura, Ihsan; Syofii, Imam
title: Flow Rate Effects on Microstructure and Mechanical Properties for Titanium Weld Joint
date: 2021-12-19
pages: 8
extension: .pdf
mime: application/pdf
words: 2999
sentence: 176
flesch: 57
cache: cache/jemmme-19082.pdf
txt: txt/jemmme-19082.txt
summary:
  The effect of argon flow rate on the mechanical properties of titanium welding and its microstructures is investigated by hardness and tensile tests. Therefore, this study investigates the effect of argon flow rate on mechanical properties and microstructures in titanium welding.


id: jemmme-19458
author: Hery Soegiharto, Achmad Fauzan; Mokhtar, Ali; Sudarman; Adiwidodo, Satworo
title: The Role of Flue Gas Inhibitor on Stabilizing Heptane Flame in Meso Scale Combustor
date: 2021-12-30
pages: 8
extension: .pdf
mime: application/pdf
words: 3406
sentence: 221
flesch: 59
cache: cache/jemmme-19458.pdf
txt: txt/jemmme-19458.txt
summary:
  From the graph, mesoscale combustor with flue gas inhibitor mesh 20 25 30 35 40 45 0,5 1 1,5 R e a ct a n t v e lo ci ty U c m /s The Role of Flue Gas Inhibitor on Stabilizing Heptane Flame in … 114 has narrower flammability limits compared to mesoscale combustor without flue gas inhibitors.


id: jemmme-6958
author: Ansori, Faisal; Widodo, Edi
title: Analysis on Centrifugal Pump Performance in Single, Serial, and Parallel
date: 2018-12-31
pages: 8
extension: .pdf
mime: application/pdf
words: 2268
sentence: 126
flesch: 67
cache: cache/jemmme-6958.pdf
txt: txt/jemmme-6958.txt
summary:
  Single centrifugal pump full valve openings 0.409 kg / cm², the opening of the valve ¾ 0,209 kg / cm² and the opening of the valve ½ 00,069 kg / cm² resulted the smaller opening valve the smaller the head as well, and the greater valve opening, the bigger head in the can. Water Debit in Full Aperture Graphic 4 shows head on parallel centrifugal pump is not achieving 0.2 kg/cm², while in serial and single centrifugal pump is the same in 0.4 kg/cm².


id: jemmme-12552
title: Design of a High Sea Wave Sensor System in Puger Beach
date: 2020-09-18
pages: 8
extension: .pdf
mime: application/pdf
words: 2826
sentence: 151
flesch: 58
cache: cache/jemmme-12552.pdf
txt: txt/jemmme-12552.txt
author:
  Fibriani, Ike; Irawan, Januar Fery; Satriya, Alfredo Bayu; Utomo, Satrio Budi; Hadi, Widyono; Widjonarko, Widjonarko; Khoiril, Khoiril

summary:
  Hence, the main purpose of this study is to design a system which gives an accurate prediction on weather condition, cyclone and high sea wave utilizing weather sensor. Then, the data from Arduino Uno will be transferred to laptop to be further processed using visual studio 2012 and presented as weather information system containing information on windspeed, air temperature and humidity, wave height, and weather condition and suggestion for fisherman safety based on wave height also included, like shown in Figure 3 (a).


id: jemmme-16012
author: Haryadi; Darmawan, Rifki Ari Darmawan
title: The Reverse Engineering on Golok Banten Slash Type
date: 2021-09-27
pages: 8
extension: .pdf
mime: application/pdf
words: 2268
sentence: 110
flesch: 64
cache: cache/jemmme-16012.pdf
txt: txt/jemmme-16012.txt
summary:
  The results of the survey of Banten machete configuration type slash as follows: From the results of this research produced configuration data and characteristics of slash machetes so that the data can be information for the public and companies who if they want to make a machete banten slash type.


id: jemmme-7672
author: Irawan, Yosua Heru; Bramantya, Muhammad Agung
date: 2019-05-30
pages: 10
extension: .pdf
mime: application/pdf
words: 3801
sentence: 199
flesch: 37
cache: cache/jemmme-7672.pdf
txt: txt/jemmme-7672.txt
title:
  Numerical Simulation of the Effect of Wind Velocity on the Counter-Rotating Wind Turbines Performance

summary:
  The first step is flow driven rotor simulation, which is used to calculate rotation speed. Flow driven rotor simulation and steady state simulation use the same simulation parameters.


id: jemmme-6831
author: Kusyairi, Imam; Choiron, Moch. Agus; Irawan, Yudy Surya; Himawan, Helmy Mukti
date: 2018-12-31
pages: 8
extension: .pdf
mime: application/pdf
words: 3136
sentence: 197
flesch: 63
cache: cache/jemmme-6831.pdf
txt: txt/jemmme-6831.txt
title:
  Effects of Origami Pattern Crash Box and Rectangular Pattern Crash Box on The Modelling Of MPV Car Structure on Deformation

summary:
  The development of origami pattern crash box on the addition of origami trapezoid geometry model is performed by Zhou et Pre folded pattern in origami pattern crash box can absorb kinetic energy.


id: jemmme-19006
author: Titahelu, Nicolas; Latuny, Jonny; Tupamahu, Cendy Sophia Edwina; Sarwuna, Sefnath Josep Etwan
title: Pitch Pitch ratio effect on the effectiveness of condenser for essential oil distillation
date: 2021-12-20
pages: 10
extension: .pdf
mime: application/pdf
words: 4809
sentence: 268
flesch: 51
cache: cache/jemmme-19006.pdf
txt: txt/jemmme-19006.txt
summary:
  [18], analysis of the effectiveness of helical pipe heat exchanger for eucalyptus essential oil distillation numerically by varying the pitch ratio. Keywords: Pitch ratio; helical coil pipe; condenser; effectiveness; clove essential oil 1.


id: jemmme-12574
author: Widodo, Sarono; Rubianto, Gatut
title: The Utilization of Air Conditioning Heat Waste as Cloth Drying Energy Source
date: 2021-04-26
pages: 8
extension: .pdf
mime: application/pdf
words: 3164
sentence: 165
flesch: 57
cache: cache/jemmme-12574.pdf
txt: txt/jemmme-12574.txt
summary:
  T. M. I. Mahlia, C. G. Hor, H. H. Masjuki, M. Husnawan, M. Varman and S. Mekhilef, 2010, Clothes Drying From Room Air Conditioning Waste Heat: The second step corresponds to the properties of the drying product with a decrease in drying rate [8].


id: jemmme-18140
author: Wilarso; Ari Dwi Wibowo
title: Online Blade Washing Analysis on Mitsubishi M701F Gas Turbine Performance in Power Plants
date: 2022-09-15
pages: 12
extension: .pdf
mime: application/pdf
words: 4470
sentence: 258
flesch: 73
cache: cache/jemmme-18140.pdf
txt: txt/jemmme-18140.txt
summary:
  5. Borello D, D’Angeli L, Salvagni A, Venturini P, Rispoli F. Study of particles deposition in gas turbine blades in presence of film cooling,DOI: 10.1115/GT2014-26250. Rani S. Common failures in gas turbine blade: a critical review, DOI: 10.5281/zenodo.1207072.


id: jemmme-7011
author: Effendi, Riki; Maghfurah, Fadwah; Rudiarto, Rudiarto
title: Optimization Design of Multifunction Machines For Making 2 Kinds of Animal Feed
date: 2018-12-31
pages: 14
extension: .pdf
mime: application/pdf
words: 3578
sentence: 170
flesch: 65
cache: cache/jemmme-7011.pdf
txt: txt/jemmme-7011.txt
summary:
  So the estimation in the selection of electric motors used in the optimization of multifunctional engine design for the manufacture of animal feed using the selection of electric motors with engine power specifications of 0.50 HP with a rotation of 1400 Rpm. The method used in the design of multifunctional animal feed machines is to design the design of parts and make material selection and calculate the strength or power of the multifunctional animal feed machine manually.


id: jemmme-12553
author: Rahmawati, Atiqa; Saputri, Aulia Iin; Gunardi, Ignatius
title: Kinetics Study of Acid Catalyzed Degradation of Glucose in High-Temperature Liquid Water
date: 2020-09-18
pages: 8
extension: .pdf
mime: application/pdf
words: 3413
sentence: 189
flesch: 53
cache: cache/jemmme-12553.pdf
txt: txt/jemmme-12553.txt
summary:
  Study of glucose degradation in Hot Compressed Water (HCW) with catalysts or without catalysts have been shown that H2SO4 and NaOH catalysts affect the process of glucose degradation reaction into products This is in accordance with the other study mentioned that HMF concentration would be higher when the temperature increase [7].


id: jemmme-15470
author: Munang, Aswan; Yamani, Achmad Zaki
title: Analysis of Composite Mechanical Strength from Waste Chicken Feather and Sawdust
date: 2021-12-19
pages: 6
extension: .pdf
mime: application/pdf
words: 3016
sentence: 172
flesch: 51
cache: cache/jemmme-15470.pdf
txt: txt/jemmme-15470.txt
summary:
  Manufacture of fiber composites and epoxy resin matrix with lower compressive and tensile strength than fiber composites and polyester resin then the energy absorption and impact strength of fiber fibers and epoxy matrix have higher values than fiber fibers and polyester matrix Modification with the chemical sodium hydroxide, acetic acid, peroxide can increase the bond between matrix and fiber and reduce water absorption thereby increasing fiber strength, suitability of natural fiber composite fibers [12].


id: jemmme-15532
author: Mokhtar, Ali; Saifullah, Ali ; Rahmandhika, Andinusa
title: A Honeycomb-Shaped Brass Plate Catalyst to Reduce Motor Vehicle Emissions
date: 2021-04-27
pages: 8
extension: .pdf
mime: application/pdf
words: 2889
sentence: 200
flesch: 61
cache: cache/jemmme-15532.pdf
txt: txt/jemmme-15532.txt
summary:
  This tool serves to measure the level of exhaust gas emissions by inserting a gas detector pipe into the exhaust hole. A decrease in HC gas emissions by 19.1% for a single catalytic converter and 33.7% for a dual catalytic converter are better compared to without using a catalytic converter or standard conditions.


id: jemmme-16403
author: Subardi, Anang; Aladin Eko Purkuncoro; Taufik, Achmad
date: 2021-12-19
pages: 6
extension: .pdf
mime: application/pdf
words: 2680
sentence: 175
flesch: 67
cache: cache/jemmme-16403.pdf
txt: txt/jemmme-16403.txt
title:
  The Effect of Wire Straighness Electric Current Variation on Size Diversion and Rude of The Cutting Current Profile of Medium Carbon Steel Dental from Wire (EDM)

summary:
  Therefore, this study aims to determine the deviation of the gear profile cutting groove and the roughness that occurs in the straight gear profile cutting groove from the results of the Wire EDM process. At this time there are two types of EDM machines, namely: conventional EDM (usually called Sinker EDM or Ram EDM) and Wire EDM


id: jemmme-7737
author: Redha, Amenah E. Mohammed
title: Evaluation and Analysis of Lightweight Concrete (LWC) Manufacturing and Applications
date: 2019-05-30
pages: 8
extension: .pdf
mime: application/pdf
words: 3711
sentence: 211
flesch: 16
cache: cache/jemmme-7737.pdf
txt: txt/jemmme-7737.txt
summary:
  Fly ash spesifications Density Kg/m3 Strength N/mm2 Water Absorption (%) Thermal Conductivity W/m.K Sound Insulation in dB 1000 6 12 0.7 35 1100 9 12 0.75 36 1200 12 14 0.79 37 1300 14 11 0.79 38 1400 15 10 0.79 38 4. CONCLUSION This paper presents the evaluation and review of lightweight concrete (LWC) manufacturing and applications. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete.


id: jemmme-12571
author: Soesatijono, Soesatijono; Darsin, Mahros
title: Literature Studies on Maintenance Management
date: 2021-05-07
pages: 8
extension: .pdf
mime: application/pdf
words: 3316
sentence: 180
flesch: 37
cache: cache/jemmme-12571.pdf
txt: txt/jemmme-12571.txt
summary:
  Exploring maintenance management development just like exploring development of technology by humankind, the more technology been developed, maintenance management follows. JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol. 6, No. 1, 2021 ISSN 2541-6332 | e-ISSN 2548-4281 Journal homepage: http://ejournal.umm.ac.id/index.php/JEMMME Soesatijono | Literature Studies on Maintenance Management 67 Literature Studies on Maintenance Management Soesatijono Soesatijonoa, Mahros Darsinb aPetra Christian University bDepartment of Mechanical Engineering, the University of Jember e-mail: mahros.teknik@unej.ac.id Abstract The purpose of this paper is to review from early days until recent time the development of maintenance management methods from maintenance textbooks to give a glance view for researcher and practitioner where maintenance start until recent development and practical application of maintenance management.


id: jemmme-6846
author: Chowdhury, Azrin Akhter; Aisyah, Iis Siti
title: Mechanical and Corrosive Nature of Galvanized Steel in Sodium Chloride Solution
date: 2018-12-31
pages: 10
extension: .pdf
mime: application/pdf
words: 3257
sentence: 229
flesch: 62
cache: cache/jemmme-6846.pdf
txt: txt/jemmme-6846.txt
summary:
  Corrosion rate for 25hr and 30hr again shows different behavior. Corrosion rate According to the graph, the reaction can be categorized into three parts that include the active, passive and the transmissive regions.


id: jemmme-16164
author: Wahyudi, Djoko ; Prasetiyo, Dani Hari Tunggal; Muhammad, Alief
title: The The Effect of Nitrogen on Methane Gas Flame Propagation Characteristic in Premix Combustion
date: 2021-12-22
pages: 6
extension: .pdf
mime: application/pdf
words: 3276
sentence: 183
flesch: 60
cache: cache/jemmme-16164.pdf
txt: txt/jemmme-16164.txt
summary:
  Therefore, the highest improvement in combustion efficiency is obtained by using a 20% N2 mixture and at the bottom ignition condition. One of the many ways to increase combustion efficiency in terms of fuel is by mixing the fuel with other compounds [9].


id: jemmme-17779
author: Winoko, Yuniarto Agus; Zulfikar, Zulfikar Jabbaruddin Al Jihad; Ro'isatin, Umi Anis
title: The Variation of Fuel Mixture of Pertalite and Corncob Bioethanol on Engine Performance
date: 2021-12-19
pages: 8
extension: .pdf
mime: application/pdf
words: 2588
sentence: 151
flesch: 68
cache: cache/jemmme-17779.pdf
txt: txt/jemmme-17779.txt
summary:
  The lowest fuel consumption was found in the use of E10 fuel of 0.000338 kg/hP while the highest fuel consumption was produced by E20 fuel of 0.0000406 kg/hP. For the highest Bmep on E15 fuel of 11.91 Psi and the lowest on E20 fuel of 11.39 Psi Keywords: bioethanol; BMEP; power; torque 1. For maximum power produced on E15 fuel of 6.47 hp and a maximum torque of 5.16 Nm.


id: jemmme-12813
author: Syofi'i, Imam; Adanta, Dendy; Prakoso, Aji Putro; Sari, Dewi Puspita
title: Application of Computational Fluid Dynamics Method for Cross-flow Turbine in Pico Scale
date: 2021-06-23
pages: 8
extension: .pdf
mime: application/pdf
words: 3744
sentence: 343
flesch: 52
cache: cache/jemmme-12813.pdf
txt: txt/jemmme-12813.txt
summary:
  These investigations found that the maximum 𝑔𝑅𝐸̅̅ ̅̅̅ of CFT CFD simulation using difference turbulence model is less than 4%. Table 3 and 4, for CFT simulation in pico scale, the k-ε standard is recommended since it requires less computational power (simpler equation) than Transitional SST and RNG k-ε.


id: jemmme-13726
date: 2020-09-25
pages: 10
extension: .pdf
mime: application/pdf
words: 3874
sentence: 155
flesch: 61
cache: cache/jemmme-13726.pdf
txt: txt/jemmme-13726.txt
author:
  Harsito, Akmal Hanif Khairullah; Aisyah, Iis Siti; Daryono, Daryono; Saifullah, Ali; Hendaryati, Heni; Sudarman, Sudarman

title:
  The Effect of Agitation Parameter on Hardness and Thickness of Decorative Nickel-Chrome Coating on A36 Steel using Electroplating Process

summary:
  The purpose of this study was to determine the effect of stirrer rpm variations on the thickness and thickness of the A36 steel layer in the decorative nickel-chrome electroplating process. Vickers Total Hardness Test Result Based on the graphic 6, of the total Vickers hardness test results above, it can be analyzed that in specimens without layers the average hardness value is 21.2 VHN, at a speed variation of 72 rpm the average hardness value is 49.19 VHN, at a speed variation of 102 rpm the average hardness value 48.35 VHN, at a variety of speed 132 rpm the average hardness value is 77.5 VHN, and at a speed variation of 162 rpm the average hardness value is 47.65 VHN.


id: jemmme-6977
author: Putri, Farika; Caesarendra, Wahyu; Pamanasari, Elta Diah; Ariyanto, Mochammad; Setiawan, Joga D
date: 2018-12-31
pages: 12
extension: .pdf
mime: application/pdf
words: 4189
sentence: 200
flesch: 61
cache: cache/jemmme-6977.pdf
txt: txt/jemmme-6977.txt
title:
  Parkinson Disease Detection Based on Voice and EMG Pattern Classification Method for Indonesian Case Study

summary:
  Figure.4 Plot example of two voice features for 23 subjects: (a) Flo feature and (b) Jitter absolute feature 4.2 Feature extraction results of EMG signals Two example of EMG features from tip toe experiment are presented in Fig. Two example of EMG features from twist experiment are presented in Fig.


id: jemmme-7982
author: Harianto, Harianto; Irawan, Yosua Heru; Yawara, Eka; Bakhtiar, Husni
title: Effect of Tapper Ratio on a Car Rear Spoiler Performance
date: 2019-05-30
pages: 14
extension: .pdf
mime: application/pdf
words: 5511
sentence: 247
flesch: 58
cache: cache/jemmme-7982.pdf
txt: txt/jemmme-7982.txt
summary:
  Pressure contour at tapper ratio of 1:0.5 JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol.4, No. 1, May 2019 Harianto | Effect of Taper Ratio on Car Rear Spoiler Performance 7 Figure 5 presents the pressure generated from an airfoil with a variation of 1: 0.5 tapper ratio with two different sides, namely the symmetry side and the base side. The pressure on the upper side of the airfoil higher than the lower side of the airfoil shows downforce in this type of tapper ratio variation.


id: jemmme-16428
author: Saifullah, Ali; Jufri, Mohammad; Kurniawati, Dini; Chandra, Risky
title: Mechanical Properties of Layered-Carbon Fiber Reinforced with Vacuum Infusion Process
date: 2021-04-30
pages: 8
extension: .pdf
mime: application/pdf
words: 3420
sentence: 204
flesch: 62
cache: cache/jemmme-16428.pdf
txt: txt/jemmme-16428.txt
summary:
  The least layers of 220 and 240 carbon fiber result the highest value of bending test, but the most number of carbon fiber layers show the opposite value. The highest value of the tensile test is achieved by the most layers of carbon fiber, while the lowest value is in the least layers.


id: jemmme-16587
author: Uddin, Md. Jasim; Rashed, Hossain
date: 2021-12-20
pages: 8
extension: .pdf
mime: application/pdf
words: 3518
sentence: 215
flesch: 50
cache: cache/jemmme-16587.pdf
txt: txt/jemmme-16587.txt
title:
  Microstructure and Mechanical Properties of a Partially Recrystallized Aluminium Alloy having Varying Cu/Mg Ratio

summary:
  The ultimate tensile strength and hardness values both in hot-rolled and aged conditions along longitudinal and transverse directions were found greater for the alloy containing 1.33 wt.% copper and 1.01 wt.% magnesium, whereas strain to fracture values for alloy 01 with 1.09 wt.% copper and 1.8 wt.% magnesium. http://ejournal.umm.ac.id/index.php/JEMMME mailto:mse.jasim@gmail.com JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering) Vol.6, No. 2, 2021 doi: https://doi.org/10.22219/jemmme.v6i2.16587 Uddin | Microstructure and Mechanical Properties of a Partially Recrystallized… 128 2. METHODS Alloys of three different compositions were prepared by casting in a permanent metal mould.


id: jemmme-17777
date: 2021-11-08
pages: 8
extension: .pdf
mime: application/pdf
words: 4121
sentence: 219
flesch: 59
cache: cache/jemmme-17777.pdf
txt: txt/jemmme-17777.txt
author:
  Satria, Dhimas; Kurniawan, Teguh; Lusiani, Rina; Listijorini, Erny; Rosyadi, Imron; Salman, Nidya Jullanar

title:
  Analysis of Pressure Laboratory Scale Swing Adsorption (PSA) Varian Design using Zeolite 13X as Adsorben Medium

summary:
  The product was O2 ≥50% 5 1 9 1 3 1 9 1 5 Manufacturing Easy to find in market 5 1 1 1 1 1 1 3 6 Operation Can be operated by 1 operator 1 1 1 1 1 1 1 1 Low level of noise 1 3 1 1 1 9 1 1 7 Safety Equipment doesn’t harm the operator 5 1 1 1 1 1 1 1 8 Maintenance Maintenance can be done by 1 1 1 1 1 1 1 1 1 9 Cost Low component & production cost 5 3 1 1 1 1 1 9 Score 185 293 193 258 91 263 25 3 Percentage (%) 12 19 12 16 5 17 16 Rank 6 1 5 3 7 2 4 3.4 Determination of PSA tool specifications At this stage, which is to determine product specifications in the form of a laboratory Sakla PSA device with an adsorbent in the form of 13X zeolite based on the House of Quality and priority scale, PSA equipment specifications have been obtained, namely as follows: 1. The steps taken to get the best variant design concept on the Pressure Swing Adsorption (PSA) tool are as follows: determining the requirements list, determining the priority scale, making a house of quality, determining PSA tool specifications, design concepts and determining the best variant.


id: jemmme-16433
author: Sudarman, Sudarman; Guszolil, Wahyu; Daryono, Daryono; Lukman, Muhammad
title: A Feasibility Study on a Micro Hydro Power Plant at Coban Jahe Waterfall, Jabung, Malang Regency
date: 2021-04-30
pages: 12
extension: .pdf
mime: application/pdf
words: 4573
sentence: 266
flesch: 73
cache: cache/jemmme-16433.pdf
txt: txt/jemmme-16433.txt
summary:
  Coban Jahe water flow has a potential flow of water with a reliable discharge of 0.60567 m3 / s and an effective head of 3.4742 m. 2. Study on Power Generation By Using Cross Flow Water Turbine in Micro Hydro Power Plant.


# url

id: jemmme-5618
domain: www.intechopen.com
url:
  http://www.intechopen.com/books/recent-advances-in-arthroplasty/titanium-as-abiomaterial-for-implants


id: jemmme-10602
domain: www.moderncasting.com
url:
  https://www.moderncasting.com/articles/2019/09/10/investment-casting-sand-andflour-conveyed-bulk-bags-automatically-dust-free


id: jemmme-10602
domain: www.moderncasting.com
url:
  https://www.moderncasting.com/articles/2019/09/10/investment-casting-sand-and-flour-conveyed-bulk-bags-automatically-dust-free


id: jemmme-10602
domain: 3dprintingindustry.com
url:
  https://3dprintingindustry.com/news/industrial-manufacturing-desktop-new-moldlay-3d-printing-filament-42481


id: jemmme-12336
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewjw7mjc3d3pahvgvh0khqowbbuqfjahegqiaxab&url=https%3a%2f%2fwww.nrel.gov%2fdocs%2ffy04osti%2f36244.pdf&usg=aovvaw3srswlh-6jz3bhn-tff0dz


id: jemmme-10221
domain: finance.detik.com
url:
  https://finance.detik.com/berita-ekonomi-bisnis/d773441/conocophillips-produksi-biodiesel-dari-lemak-babi


id: jemmme-10221
domain: finance.detik.com
url:
  https://finance.detik.com/berita-ekonomi-bisnis/d-773441/conocophillips-produksi-biodiesel-dari-lemak-babi


id: jemmme-11968
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewijw_7lon3pahuz7nmbhv3daccqfjaaegqibrab&url=http%3a%2f%2facademica-e.unavarra.es%2fbitstream%2fhandle%2f2454%2f4127%2f577561.pdf%3fsequence%3d1%26isallowed%3dy&usg=aovvaw1ys1_gvewftkh7b8vtiaag


id: jemmme-11968
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewifypbqpd3pahwsv30khdzga80qfjaaegqiarab&url=http%3a%2f%2fciteseerx.ist.psu.edu%2fviewdoc%2fdownload%3fdoi%3d10.1.1.11.996%26rep%3drep1%26type%3dpdf&usg=aovvaw2ern2ihq_-yw2buufm9kca


id: jemmme-10492
domain: patft.uspto.gov
url:
  http://patft.uspto.gov/netacgi/nph-parser?sect1=pto1&sect2=hitoff&d=pall&p=1&u=%2fnetahtml%2fpto%2fsrchnum.htm&r=1&f=g&l=50&s1=3586816.pn.&os=pn/3586816&rs=pn/3586816


id: jemmme-10492
domain: patft.uspto.gov
url:
  http://patft.uspto.gov/netacgi/nph-parser?sect1=pto1&sect2=hitoff&d=pall&p=1&u=%2fnetahtml%2fpto%2fsrchnum.htm&r=1&f=g&l=50&s1=6506997.pn.&os=pn/6506997&rs=pn/6506997


id: jemmme-11675
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/2087556873_z-x_liu?_sg=4icofsd7x4zui9qjwrsswk9bzpnkbk8255qtbxx5kwsgvrjytd-bybb3meszsqfxvwxjidq.5xqeocdq48mai-sauowhota8lvbereczds-srmgjyghuyf6eybtnrt9r9ar_tz8yvrzita8oe91dzc4599bidw


id: jemmme-11675
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/2113237763_x-m_zhang?_sg=4icofsd7x4zui9qjwrsswk9bzpnkbk8255qtbxx5kwsgvrjytd-bybb3meszsqfxvwxjidq.5xqeocdq48mai-sauowhota8lvbereczds-srmgjyghuyf6eybtnrt9r9ar_tz8yvrzita8oe91dzc4599bidw


id: jemmme-11675
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/jianguo_tang3?_sg=4icofsd7x4zui9qjwrsswk9bzpnkbk8255qtbxx5kwsgvrjytd-bybb3meszsqfxvwxjidq.5xqeocdq48mai-sauowhota8lvbereczds-srmgjyghuyf6eybtnrt9r9ar_tz8yvrzita8oe91dzc4599bidw


id: jemmme-11675
domain: www.ncbi.nlm.nih.gov
url:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=walkowicz%20m%5bauthor%5d&cauthor=true&cauthor_uid=30029477


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/44909769_gert_heinrich?_sg=utgfz_njiwk_6sfe47ewo7f_k5c5qqasdxqbg1-wxoammddzamcwlmddvfbyxqwgprdxrc8.fihmvlii2mithf_zvnplfy8xt_omssys8tovixbsdkfy5nm-rs4rfcbdexuut5iw6kg4m0nqtfwrcsxv3lfflg


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/manfred_klueppel?_sg=utgfz_njiwk_6sfe47ewo7f_k5c5qqasdxqbg1-wxoammddzamcwlmddvfbyxqwgprdxrc8.fihmvlii2mithf_zvnplfy8xt_omssys8tovixbsdkfy5nm-rs4rfcbdexuut5iw6kg4m0nqtfwrcsxv3lfflg


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/bo_persson5?_sg=vjxnsjzjbdeinlwjfw_ngitqhpmtsh0yqskiqx6isby5gbzzonq3_xlfg4nvzucub_905f4.rmzvpasnct3z4_iu6oluyfbfksizcljkiwdinuatqqfajedcaqlxepni8wq5gqprdfvstgefg0e1squf4lvr6q


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/8776863_u_tartaglino?_sg=vjxnsjzjbdeinlwjfw_ngitqhpmtsh0yqskiqx6isby5gbzzonq3_xlfg4nvzucub_905f4.rmzvpasnct3z4_iu6oluyfbfksizcljkiwdinuatqqfajedcaqlxepni8wq5gqprdfvstgefg0e1squf4lvr6q


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/11729556_o_albohr?_sg=vjxnsjzjbdeinlwjfw_ngitqhpmtsh0yqskiqx6isby5gbzzonq3_xlfg4nvzucub_905f4.rmzvpasnct3z4_iu6oluyfbfksizcljkiwdinuatqqfajedcaqlxepni8wq5gqprdfvstgefg0e1squf4lvr6q


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/erio_tosatti?_sg=vjxnsjzjbdeinlwjfw_ngitqhpmtsh0yqskiqx6isby5gbzzonq3_xlfg4nvzucub_905f4.rmzvpasnct3z4_iu6oluyfbfksizcljkiwdinuatqqfajedcaqlxepni8wq5gqprdfvstgefg0e1squf4lvr6q


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/75025681_d_s_rimai?_sg=zrtb7hv8hof9nnnhyd27vvkm03tcs3ztxt0ejq01aaypoqdu90i9epok8gikkvhhzxwtcxa.pxenmjashukeia6l9j1tqhp9wv2xjfgrzbahncyv5ayvts5icjj-luswee8yt3znrjno2m5kwperfgxndjrljg


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/2002475198_m_ezenyilimba?_sg=zrtb7hv8hof9nnnhyd27vvkm03tcs3ztxt0ejq01aaypoqdu90i9epok8gikkvhhzxwtcxa.pxenmjashukeia6l9j1tqhp9wv2xjfgrzbahncyv5ayvts5icjj-luswee8yt3znrjno2m5kwperfgxndjrljg


id: jemmme-10428
domain: www.researchgate.net
url:
  https://www.researchgate.net/scientific-contributions/82606458_david_j_quesnel?_sg=zrtb7hv8hof9nnnhyd27vvkm03tcs3ztxt0ejq01aaypoqdu90i9epok8gikkvhhzxwtcxa.pxenmjashukeia6l9j1tqhp9wv2xjfgrzbahncyv5ayvts5icjj-luswee8yt3znrjno2m5kwperfgxndjrljg


id: jemmme-10428
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewi5ysstoc_pahxy8xmbhudcdcaqfjaaegqiahab&url=http%3a%2f%2fijacskros.com%2fartcles%2fijacs-2s-22.pdf&usg=aovvaw21s_lowqp9qmgksf7cnoij


id: jemmme-8531
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahukewit4i-8k8diahvjpy8khu4paksqfjaaegqiaxac&url=http%3a%2f%2flibrary.um.ac.id%2ffree-contents%2fdownload%2fbook%2fbooksearch.php%2fsurdia&usg=aovvaw230r1uvrfsefc-n_j2oy3b


id: jemmme-8531
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=2ahukewjqle-llmdiahuji3akhdufcu4qfjabegqibrac&url=https%3a%2f%2fmedia.neliti.com%2fmedia%2fpublications%2f134512-id-pengecoran-squeeze.pdf&usg=aovvaw3ku5fhwpmyvqvreoiefzue


id: jemmme-8531
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahukewi__edpl8diahvug-ykhfnlauyqfjaaegqiahac&url=http%3a%2f%2feprints.umm.ac.id%2f33153%2f1%2fjiptummpp-gdl-ahmadthola-42923-1-pendahul-n.pdf&usg=aovvaw1r_j8pgll6hsco4j4vy7bs


id: jemmme-8531
domain: pdf.sciencedirectassets.com
url:
  https://pdf.sciencedirectassets.com/282606/1-s2.0-s2211812814x00039/1-s2.0-s2211812814009523/main.pdf?x-amz-security-token=agojb3jpz2lux2vjed8acxvzlwvhc3qtmsjgmeqcifc%2bmwrh9gk1lg%2fzbaprrhcm6azx3zn1bxivabpus3ozaiblpa2ymhiawdf8pu2b7gfy0tvdtifar9sxasvhbol2bcraawhyeaiadda1otawmzu0njg2nsimof7tieuhczveiqolkrcdvlcw1llvgxbgokfmrns9mi47hnbp3l%2flozbtjap%2b6xpp%2f1vt1tr9etw3a1nrl61vdlm%2fchyy6d%2bw5jw3hzufctcssuepixb%2bgojibbaejah38hcx0a1wmraafsgkglexdtfbz2qy9c7jp1kbg3063e%2ba1tyj2uncqrztkzbodi3vefshxdlpcxekgbiqpfexgqy0lfrb8yjcirymww3smqjxr4rd4gi57detwp9sqifyb9cuveigy9dybp3fyyffeubzpwb7oncbjyjx0peyxsyozngymmmuliz1e10cxsn2yicvo0zh6xzcp1xibztjuqlwvraavw12ctczpu%2bi2c6s95oly8fhcsjoeauupkqm7cnasxmtggj%2fqcdbi%2b8tfpzho2hkxccaihxxxihp4gk%2bvxp8qqrgdyrld188wcxrgmrjusee9rou17%2fbk2fjpnjdaaxlhrnovs0rsxvbmzzyhzh51ad7zq0jg7ceubybr5xp5u2os29m3jcdlx3u0yprwkwlz07wunh%2bjn2696pynrpvgdyyocrhsebavzqrnymimlijgni%2firx5tatuvanq0prnuzdg1ljnbtq1auwoeitawtyx1qljbob9crjqgnezyft31euhto49v0aldiudbgsiev1u0oa%2f9wzwfqgizqc7j35fsuhewf%2bly5emwyei198u9ppp8nsomufjqeslbh7ykykdn1nttjqg6rpdbxxpvghevfjv%2fr1hyy%2fqd1tl66v%2bdybbmnm5feduzvh9ozbdfgfqolkbbdyrb%2f7gdp8ul0oz6rg5w7lw973hozioewn189jnzudwotl42dwx2l0%3d&awsaccesskeyid=asiaq3phcvtys5cnnxze&expires=1559114456&signature=rshqcsmlpirsqvpzczai41n2aay%3d&hash=eac89fc40e9f2aa9b8c823a9ca7a2ba29cb24a5386f54ad2e23af3e900b0f046&host=68042c943591013ac2b2430a89b270f6af2c76d8dfd086a07176afe7c76c2c61&pii=s2211812814009523&tid=spdf-d3a43294-9032-4406-95ac-83d1ec31bcf1&sid=a1bebe9f65d54342b27994955e5eec804db9gxrqb&type=client


id: jemmme-8435
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/267505598_laser-assisted_friction_stir_lap_welding_of_aluminum


id: jemmme-8435
domain: www.aluminum.org
url:
  https://www.aluminum.org/?section=home&contentid=22762&template=/cm/contentdisplay.cfmhttp://www.aluminum.org/am/template.cfm?section=home&contentid=22762&template=/cm/contentdisplay.cfm


id: jemmme-8435
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=2ahukewi_8tao9l_iahufosskhsuubo8qfjagegqicbac&url=http%3a%2f%2fwww.fswsymposium.co.uk%2feasysiteweb%2fgatewaylink.aspx%3falid%3d1238961&usg=aovvaw3caajtuxrg9y1emopcsp6a


id: jemmme-8435
domain: www.scribd.com
url:
  https://www.scribd.com/doc/63559781/carslaw-and-jaeger-conduction-of-heat-in-solids-1959-isbn-0198533683


id: jemmme-8435
domain: www.twi-global.com
url:
  https://www.twi-global.com/technical-knowledge/published-papers/progress-in-friction-stir-welding-of-aluminium-and-steel-for-marine-applications-october-2003


id: jemmme-8435
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahukewiu-cmqg8diahx-8hmbhfkadwoqfjaaegqiarac&url=http%3a%2f%2fsaintek.ub.ac.id%2fprosiding%2fm11.pdf&usg=aovvaw2zivx0mmzyyntqkjlerjl8


id: jemmme-8435
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/323469792_non-rotating_shoulder_tool_for_friction_stir_welding


id: jemmme-8222
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/325945201_printing_on_polymers_fundamentals_and_applications


id: jemmme-8222
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/305027916_study_of_the_thermal_properties_of_filaments_for_3d_printing


id: jemmme-8222
domain: www.researchpublish.com
url:
  http://www.researchpublish.com/download.php?file=evaluation%20of%20fdm%20process%20parameter%20for%20pla%20material%20by%20using%20moora-topsis%20method-1670.pdf&act=book


id: jemmme-8222
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/313512331_effect_of_layer_thickness_deposition_angle_and_infill_on_maximum_flexural_force_in_fdm-built_specimens


id: jemmme-8222
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/308084011_effect_of_infill_parameters_on_tensile_mechanical_behavior_in_desktop_3d_printing


id: jemmme-8222
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/317182613_analysis_on_the_impact_process_parameters_on_tensile_strength_using_3d_printer_repetier-host_software


id: jemmme-8222
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/316530842_bond_and_part_strength_in_fused_deposition_modeling


id: jemmme-7092
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/279843241_brake_failure_and_its_effect_on_road_traffic_accident_in_kumasi_metropolis_ghana


id: jemmme-7092
domain: www.elsevier.com
url:
  https://www.elsevier.com/books/failure-analysis-in-engineering-applications/nishida/978-0-7506-1065-0


id: jemmme-7092
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/251608573_porosity_hydrogen_and_bifilm_content_in_al_alloy_castings


id: jemmme-7092
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/281132226_influence_of_surface_an_internal_casting_defects_on_the_fatigue_behaviour_of_a357-t6_cast_aluminium_alloy


id: jemmme-7092
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/257009806_effect_of_ultrasonic_argon_degassing_on_dissolved_hydrogen_in_aluminium_alloy


id: jemmme-7092
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/258908716_the_effect_of_processing_parameters_on_ultrasonic_degassing_efficiency


id: jemmme-7092
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/272075805_study_on_hydrogen_removal_of_az91_alloys_using_ultrasonic_argon_degassing_process


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/263622632_design_and_performance_evaluation_of_a_10kw_scale_counter-rotating_wind_turbine_rotor


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/245100477_actuator-disc_theory_for_vertical-axis_wind_turbines


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/315363915_numerical_simulation_of_the_effect_of_axial_distance_between_two_rotors_in_counter-rotating_wind_turbines


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/258404935_computational_analysis_of_30_kw_contra_rotor_wind_turbine


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/286902587_computational_and_experimental_analysis_of_a_counter-rotating_wind_turbine_system


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/223860824_aerodynamic_performance_prediction_of_a_30kw_counter-rotating_wind_turbine_system


id: jemmme-7672
domain: www.semanticscholar.org
url:
  https://www.semanticscholar.org/paper/energy-innovations-small-grant-(eisg)-program-controls/f3e6e3b6e8d5076b3738ebb8b8b63007cdb89a40


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/228900747_design_and_blade_optimization_of_contra_rotation_double_rotor_wind_turbine


id: jemmme-7672
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/273382655_flow-driven_rotor_simulation_of_vertical_axis_tidal_turbines_a_comparison_of_helical_and_straight_blades


id: jemmme-18140
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/245353326_a_study_of_online_and_offline_turbine_washing_to_optimize_the_operation_of_a_gas_turbine


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/31714606_the_ecology_of_building_materials_b_berge_prol_de_howard_liddell_tr_por_filip_henley


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/236885840_lightweight_concrete_production_with_low_portland_cement_consumption


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/236179591_effect_of_granulated_blast_furnace_slag_and_fly_ash_addition_on_the_strength_properties_of_lightweight_mortars_containing_waste_pet_aggregates


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/229315099_strength_and_elastic_properties_of_structural_lightweight_concretes


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/24256456_the_applicability_of_different_waste_materials_for_the_production_of_light_weight_aggregates


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/257388978_mechanical_properties_of_expanded_polystyrene_lightweight_aggregate_concrete_and_brick


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/251527281_release_of_internal_curing_water_from_lightweight_aggregates_in_cement_paste_investigated_by_neutron_and_x-ray_tomography


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/248541387_characteristics_of_lightweight_concrete_containing_mineral_admixtures


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/257389193_thermal_conductivity_and_shrinkage_properties_of_modified_waste_polystyrene_aggregate_concretes


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/233644953_effect_of_high_temperature_on_mechanical_and_physical_properties_of_lightweight_cement_based_refractory_including_expanded_vermiculite


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/251621339_lightweight_concrete_incorporating_pumice_based_blended_cement_and_aggregate_mechanical_and_durability_characteristics


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/241103356_absorption_and_desorption_properties_of_fine_lightweight_aggregate_for_application_to_internally_cured_concrete_mixtures


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/232397422_effect_of_expanded_perlite_on_the_mechanical_properties_and_thermal_conductivity_of_lightweight_concrete


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/257564366_engineering_properties_microstructure_and_strength_development_of_lightweight_concrete_containing_pumice_aggregates


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/257571173_transient_thermal_response_of_lightweight_cementitious_composites_made_with_polyurethane_foam_waste


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/234071509_lightweight_concrete_made_from_crushed_oil_palm_shell_tensile_strength_and_effect_of_initial_curing_on_compressive_strength


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/257896233_new_production_process_for_insulation_blocks_composed_of_eps_and_lightweight_concrete_containing_pumice_aggregate


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/275365844_non-steady-state_accelerated_chloride_penetration_resistance_of_structural_lightweight_aggregate_concrete


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/311735029_a_comparative_study_of_thermal_insulations_and_physical_properties_of_lightweight_concrete_using_some_raw_materials


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/260392282_mechanical_and_thermal_properties_of_lightweight_concretes_with_vermiculite_and_eps_using_air-entraining_agent


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/317395509_effect_of_different_gradings_of_lightweight_aggregates_on_the_properties_of_concrete


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/312910428_application_of_structural_lightweight_aggregate_concrete_in_floating_marine_concrete_structures_-_a_review


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/317053011_predicting_the_compressive_strength_of_ultra-lightweight_concrete_by_an_artificial_neural_network


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/285762399_effect_of_adding_sawdust_on_mechanical-physical_properties_of_ceramic_bricks_to_obtain_lightweight_building_material


id: jemmme-7737
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/327837780_laser_effect_on_optical_and_structural_properties_of_cdte_al_thin_films_prepared_by_pulsed_laser_deposition_technique


id: jemmme-12813
domain: www.google.com
url:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewi4vlpnjcvxahulosskhr-vddoqfjaaegqibrad&url=https%3a%2f%2fir.library.oregonstate.edu%2fdownloads%2fgm80hw17p&usg=aovvaw0vhji5m3zw1pjjh4rspz-k


id: jemmme-12813
domain: www.researchgate.net
url:
  https://www.researchgate.net/profile/janusz-steller/publication/273452336_flow_analysis_through_a_reaction_cross-flow_turbine/links/55028d9f0cf24cee39fc64c1/flow-analysis-through-a-reaction-cross-flow-turbine.pdf


id: jemmme-12813
domain: www.frenchriverland.com
url:
  http://www.frenchriverland.com/a_laboratory_study_to_improve_the_efficiency_of_cross-flow_turbines-_nadim_aziz_&_venkappayya.htm


id: jemmme-12813
domain: www.semanticscholar.org
url:
  https://www.semanticscholar.org/paper/modernization-of-the-outflow-system-of-cross-flow-kaniecki/8ae20f155bdeb6a6efc5463bbcc6f71a688962ae


id: jemmme-12813
domain: www.frenchriverland.com
url:
  https://www.frenchriverland.com/some_fluid_flow_characteristics_of_a_cross_flow_type_hydraulic_turbine-_durgin_&_fay.htm


id: jemmme-7982
domain: researchoutput.ncku.edu.tw
url:
  https://researchoutput.ncku.edu.tw/zh/publications/computational-aero-acoustic-analysis-of-a-passenger-car-with-a-re


id: jemmme-7982
domain: www.semanticscholar.org
url:
  https://www.semanticscholar.org/paper/study-the-effect-of-rear-spoiler-on-car-hai-tao/4248fe65de92a7bb963b0dc060107ff66b8ca95e


id: jemmme-7982
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/289357809_development_of_cfd_methodology_for_drag_force_prediction_on_passenger_car_with_rear_mounted_spoiler


id: jemmme-7982
domain: docplayer.net
url:
  https://docplayer.net/39907434-analysis-of-naca-2412-for-automobile-rear-spoiler-using-composite-material.html


id: jemmme-7982
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/253651183_aerodynamic_noise_source_identification_for_a_coupe_passenger_car_by_numerical_method_focusing_on_the_effect_of_the_rear_spoiler


id: jemmme-7982
domain: www.researchgate.net
url:
  https://www.researchgate.net/publication/319951181_cfd_analysis_of_passenger_vehicleat_various_angle_of_rear_end_spoiler


# ent

id: jemmme-5618
sid: 129
eid: 3
type: ORG
entity:
  http://www.intechopen.com/books/recent-advances-in-arthroplasty/titanium-as-abiomaterial-for-implants 7


id: jemmme-11519
sid: 131
eid: 1
type: PERSON
entity:
  http://dx.doi.org/10.1016/j.engfailanal.2016.07.014 http://dx.doi.org/10.1016/j.electacta.2016.08.024


id: jemmme-11928
sid: 165
eid: 1
type: MONEY
entity:
  10.1080/18811248.2010.9711927 https://doi.org/10.1016/j.ijmachtools.2004.04.018 https://doi.org/10.1016/j.jmapro.2018.05.024 https://doi.org/10.1016/j.mspro.2014.07.357 https://doi.org/10.1016/j.sna.2015.11.017 https://doi.org/10.3390/s18114031


id: jemmme-10602
sid: 149
eid: 2
type: PERSON
entity:
  https://doi.org/10.4103/0970-9290.100418 https://www.qgdigitalpublishing.com/publication/?m=55001&i=628953&p=30&ver=html5 https://www.qgdigitalpublishing.com/publication/?m=55001&i=628953&p=30&ver=html5


id: jemmme-11643
sid: 23
eid: 1
type: PERSON
entity:
  http://ejournal.umm.ac.id/index.php/jemmme mailto:frizka@itats.ac.id mailto:chwang@mail.ntust.edu.tw jemmme


id: jemmme-10221
sid: 180
eid: 1
type: PERSON
entity:
  https://lib.unnes.ac.id/27700/ https://finance.detik.com/berita-ekonomi-bisnis/d-773441/conocophillips-produksi-biodiesel-dari-lemak-babi https://repository.ipb.ac.id/handle/123456789/49878


id: jemmme-10221
sid: 182
eid: 2
type: PERSON
entity:
  http://dx.doi.org/10.29122/jtl.v11i3.1183 http://jurnalmahasiswa.unesa.ac.id/index.php/jtm-unesa/article/view/10095 http://repository.unmuhpnk.ac.id/395/


id: jemmme-10492
sid: 206
eid: 1
type: PERSON
entity:
  http://patft.uspto.gov/netacgi/nph-parser?sect1=pto1&sect2=hitoff&d=pall&p=1&u=%2fnetahtml%2fpto%2fsrchnum.htm&r=1&f=g&l=50&s1=3586816.pn.&os=pn/3586816&rs=pn/3586816 http://patft.uspto.gov/netacgi/nph-parser?sect1=pto1&sect2=hitoff&d=pall&p=1&u=%2fnetahtml%2fpto%2fsrchnum.htm&r=1&f=g&l=50&s1=6506997.pn.&os=pn/6506997&rs=pn/6506997


id: jemmme-11990
sid: 176
eid: 1
type: PERSON
entity:
  https://doi.org/10.1016/j.fuel.2013.04.083 https://doi.org/10.1016/j.fuel.2010.09.015 https://doi.org/10.1016/j.fuel.2009.07.002 https://doi.org/10.1016/j.fuel.2018.02.001


id: jemmme-10428
sid: 225
eid: 1
type: PERSON
entity:
  https://doi.org/10.1103/physrevb.71.035428 https://www.researchgate.net/scientific-contributions/75025681_d_s_rimai?_sg=zrtb7hv8hof9nnnhyd27vvkm03tcs3ztxt0ejq01aaypoqdu90i9epok8gikkvhhzxwtcxa.pxenmjashukeia6l9j1tqhp9wv2xjfgrzbahncyv5ayvts5icjj-luswee8yt3znrjno2m5kwperfgxndjrljg https://www.researchgate.net/scientific-contributions/2002475198_m_ezenyilimba?_sg=zrtb7hv8hof9nnnhyd27vvkm03tcs3ztxt0ejq01aaypoqdu90i9epok8gikkvhhzxwtcxa.pxenmjashukeia6l9j1tqhp9wv2xjfgrzbahncyv5ayvts5icjj-luswee8yt3znrjno2m5kwperfgxndjrljg https://www.researchgate.net/scientific-contributions/82606458_david_j_quesnel?_sg=zrtb7hv8hof9nnnhyd27vvkm03tcs3ztxt0ejq01aaypoqdu90i9epok8gikkvhhzxwtcxa.pxenmjashukeia6l9j1tqhp9wv2xjfgrzbahncyv5ayvts5icjj-luswee8yt3znrjno2m5kwperfgxndjrljg


id: jemmme-11675
sid: 197
eid: 1
type: ORG
entity:
  https://www.researchgate.net/scientific-contributions/2087556873_z-x_liu?_sg=4icofsd7x4zui9qjwrsswk9bzpnkbk8255qtbxx5kwsgvrjytd-bybb3meszsqfxvwxjidq.5xqeocdq48mai-sauowhota8lvbereczds-srmgjyghuyf6eybtnrt9r9ar_tz8yvrzita8oe91dzc4599bidw https://www.researchgate.net/scientific-contributions/2113237763_x-m_zhang?_sg=4icofsd7x4zui9qjwrsswk9bzpnkbk8255qtbxx5kwsgvrjytd-bybb3meszsqfxvwxjidq.5xqeocdq48mai-sauowhota8lvbereczds-srmgjyghuyf6eybtnrt9r9ar_tz8yvrzita8oe91dzc4599bidw https://www.researchgate.net/profile/jianguo_tang3?_sg=4icofsd7x4zui9qjwrsswk9bzpnkbk8255qtbxx5kwsgvrjytd-bybb3meszsqfxvwxjidq.5xqeocdq48mai-sauowhota8lvbereczds-srmgjyghuyf6eybtnrt9r9ar_tz8yvrzita8oe91dzc4599bidw


id: jemmme-11675
sid: 197
eid: 4
type: PERSON
entity:
  https://www.ncbi.nlm.nih.gov/pubmed/?term=knych%20t%5bauthor%5d&cauthor=true&cauthor_uid=30029477 https://www.ncbi.nlm.nih.gov/pubmed/?term=dymek%20s%5bauthor%5d&cauthor=true&cauthor_uid=30029477 https://www.ncbi.nlm.nih.gov/pmc/articles/pmc6073604/ jemmme


id: jemmme-11766
sid: 165
eid: 2
type: PERSON
entity:
  https://id.wikipedia.org/wiki/simbol_euro https://id.wikipedia.org/wiki/simbol_euro https://id.wikipedia.org/wiki/simbol_euro jemmme


id: jemmme-5877
sid: 95
eid: 2
type: PERSON
entity:
  roughness https://ejournal.unsri.ac.id/index.php/jrm/article/view/59 https://www.elsevier.com/books/pipe-drafting-and-design/parisher/978-0-12-384700-3


id: jemmme-8781
sid: 119
eid: 1
type: PERSON
entity:
  http://www.steelindonesia.com/article/04 https://doi.org/10.1109/picmet.2006.296739 https://link.springer.com/article/10.1007/s12541-011-0082-z


id: jemmme-9514
sid: 31
eid: 1
type: ORG
entity:
  http://ejournal.umm.ac.id/index.php/jemmme mailto:budionoft@umm.ac.id mailto:suwarsono@umm.ac.id jemmme


id: jemmme-8435
sid: 135
eid: 1
type: ORG
entity:
  https://www.researchgate.net/publication/267505598_laser-assisted_friction_stir_lap_welding_of_aluminum https://www.researchgate.net/publication/267505598_laser-assisted_friction_stir_lap_welding_of_aluminum


id: jemmme-8435
sid: 137
eid: 1
type: ORG
entity:
  https://www.scribd.com/doc/63559781/carslaw-and-jaeger-conduction-of-heat-in-solids-1959-isbn-0198533683 https://www.scribd.com/doc/63559781/carslaw-and-jaeger-conduction-of-heat-in-solids-1959-isbn-0198533683 https://www.sciencedirect.com/science/article/abs/pii/s0967066111001845 https://www.sciencedirect.com/science/article/abs/pii/s0967066111001845 https://www.sciencedirect.com/science/article/abs/pii/s0967066111001845 jemmme


id: jemmme-23086
sid: 165
eid: 1
type: ORG
entity:
  https://doi.org/10.1016/j.msea.2009.05.035 https://doi.org/10.1002/app.31787 https://doi.org/10.1016/j.engfracmech.2019.02.028 https://doi.org/10.1016/b978-0-12-816129-6.00008-9 https://doi.org/10.1080/15376494.2021.1952663


id: jemmme-8222
sid: 168
eid: 1
type: PERSON
entity:
  https://www.researchgate.net/publication/313512331_effect_of_layer_thickness_deposition_angle_and_infill_on_maximum_flexural_force_in_fdm-built_specimens https://www.researchgate.net/publication/313512331_effect_of_layer_thickness_deposition_angle_and_infill_on_maximum_flexural_force_in_fdm-built_specimens


id: jemmme-8222
sid: 168
eid: 2
type: PERSON
entity:
  https://www.emeraldinsight.com/doi/abs/10.1108/rpj-09-2013-0093 https://www.emeraldinsight.com/doi/abs/10.1108/rpj-09-2013-0093 https://www.emeraldinsight.com/doi/abs/10.1108/rpj-09-2013-0093 https://doi.org/10.1016/j.matdes.2014.02.038 https://doi.org/10.1016/j.matdes.2014.02.038 https://doi.org/10.1016/j.matdes.2014.02.038 https://www.researchgate.net/publication/308084011_effect_of_infill_parameters_on_tensile_mechanical_behavior_in_desktop_3d_printing


id: jemmme-7092
sid: 182
eid: 1
type: GPE
entity:
  https://onlinelibrary.wiley.com/doi/abs/10.1002/pi.4990300228 https://onlinelibrary.wiley.com/doi/abs/10.1002/pi.4990300228


id: jemmme-7092
sid: 183
eid: 1
type: PERSON
entity:
  https://www.sciencedirect.com/science/article/abs/pii/s0042207x1400222x https://www.sciencedirect.com/science/article/abs/pii/s0042207x1400222x


id: jemmme-7092
sid: 189
eid: 1
type: PERSON
entity:
  https://www.researchgate.net/publication/257008792_degassing_of_aluminum_alloys_during_re-melting https://www.researchgate.net/publication/257008792_degassing_of_aluminum_alloys_during_re-melting jemmme


id: jemmme-19082
sid: 155
eid: 1
type: FAC
entity:
  https://doi.org/10.1088/1757-899x/465/1/012006 https://journal.itny.ac.id/index.php/retii/article/view/456 https://doi.org/10.1016/s0921-5093(00)00969-2 https://doi.org/10.31399/asm.tb.ttg2.t61120005


id: jemmme-19458
sid: 189
eid: 1
type: PERSON
entity:
  https://doi.org/10.1016/j.egypro.2017.09.213 https://doi.org/10.1080/00102202.2019.1565492 https://doi.org/10.1080/00102202.2018.1463220


id: jemmme-7672
sid: 178
eid: 1
type: ORG
entity:
  https://www.researchgate.net/publication/228900747_design_and_blade_optimization_of_contra_rotation_double_rotor_wind_turbine https://www.researchgate.net/publication/228900747_design_and_blade_optimization_of_contra_rotation_double_rotor_wind_turbine https://www.researchgate.net/publication/228900747_design_and_blade_optimization_of_contra_rotation_double_rotor_wind_turbine jemmme


id: jemmme-15470
sid: 161
eid: 1
type: FAC
entity:
  https://doi.org/10.1177%2f0731684418799528 https://doi.org/10.1016/j.jcomc.2020.100013 https://doi.org/10.1016/j.biortech.2009.11.040 http://dx.doi.org/10.4236/ojcm.2012.22006 https://link.springer.com/article/10.1007/s10924-006-0042-3 https://doi.org/10.1177%2f0731684409356610 https://doi.org/10.1177%2f0731684409356610


id: jemmme-15532
sid: 200
eid: 3
type: PERSON
entity:
  https://doi.org/10.3390/catal6040054 https://doi.org/10.1016/j.resenv.2020.100006 https://doi.org/10.3182/20120215-3-at-3016.00030 jemmme


id: jemmme-12571
sid: 165
eid: 5
type: PERSON
entity:
  http://www.plant-maintenance.com/articles/tpm_intro.shtml https://en.wikipedia.org/wiki/total_productive_maintenance https://en.wikipedia.org/wiki/condition_monitoring


id: jemmme-16164
sid: 131
eid: 2
type: ORG
entity:
  https://doi.org/10.1155/2017/4695975 https://doi.org/10.1093/cje/beaa022 https://doi.org/10.1063/5.0000884


id: jemmme-7737
sid: 152
eid: 1
type: ORG
entity:
  https://www.researchgate.net/publication/31714606_the_ecology_of_building_materials_b_berge_prol_de_howard_liddell_tr_por_filip_henley https://www.researchgate.net/publication/236885840_lightweight_concrete_production_with_low_portland_cement_consumption https://www.researchgate.net/publication/236885840_lightweight_concrete_production_with_low_portland_cement_consumption https://www.researchgate.net/publication/236179591_effect_of_granulated_blast_furnace_slag_and_fly_ash_addition_on_the_strength_properties_of_lightweight_mortars_containing_waste_pet_aggregates https://www.researchgate.net/publication/236179591_effect_of_granulated_blast_furnace_slag_and_fly_ash_addition_on_the_strength_properties_of_lightweight_mortars_containing_waste_pet_aggregates https://www.researchgate.net/publication/236179591_effect_of_granulated_blast_furnace_slag_and_fly_ash_addition_on_the_strength_properties_of_lightweight_mortars_containing_waste_pet_aggregates https://www.researchgate.net/publication/229315099_strength_and_elastic_properties_of_structural_lightweight_concretes https://www.researchgate.net/publication/229315099_strength_and_elastic_properties_of_structural_lightweight_concretes https://www.researchgate.net/publication/24256456_the_applicability_of_different_waste_materials_for_the_production_of_light_weight_aggregates


id: jemmme-7737
sid: 152
eid: 2
type: PERSON
entity:
  https://www.researchgate.net/publication/257388978_mechanical_properties_of_expanded_polystyrene_lightweight_aggregate_concrete_and_brick https://www.researchgate.net/publication/257388978_mechanical_properties_of_expanded_polystyrene_lightweight_aggregate_concrete_and_brick https://www.researchgate.net/publication/251527281_release_of_internal_curing_water_from_lightweight_aggregates_in_cement_paste_investigated_by_neutron_and_x-ray_tomography https://www.researchgate.net/publication/251527281_release_of_internal_curing_water_from_lightweight_aggregates_in_cement_paste_investigated_by_neutron_and_x-ray_tomography https://www.researchgate.net/publication/251527281_release_of_internal_curing_water_from_lightweight_aggregates_in_cement_paste_investigated_by_neutron_and_x-ray_tomography https://www.sciencedirect.com/science/article/abs/pii/s0950061811001589 https://www.sciencedirect.com/science/article/abs/pii/s0950061811001589 https://www.sciencedirect.com/science/article/abs/pii/s0950061811001589 https://www.researchgate.net/publication/248541387_characteristics_of_lightweight_concrete_containing_mineral_admixtures https://www.researchgate.net/publication/248541387_characteristics_of_lightweight_concrete_containing_mineral_admixtures https://www.researchgate.net/publication/296101365_building_materials_in_civil_engineering https://www.researchgate.net/publication/296101365_building_materials_in_civil_engineering


id: jemmme-7737
sid: 191
eid: 2
type: PERSON
entity:
  https://www.researchgate.net/publication/233644953_effect_of_high_temperature_on_mechanical_and_physical_properties_of_lightweight_cement_based_refractory_including_expanded_vermiculite https://www.researchgate.net/publication/233644953_effect_of_high_temperature_on_mechanical_and_physical_properties_of_lightweight_cement_based_refractory_including_expanded_vermiculite https://www.researchgate.net/publication/233644953_effect_of_high_temperature_on_mechanical_and_physical_properties_of_lightweight_cement_based_refractory_including_expanded_vermiculite


id: jemmme-7737
sid: 192
eid: 1
type: PERSON
entity:
  https://www.researchgate.net/publication/241103356_absorption_and_desorption_properties_of_fine_lightweight_aggregate_for_application_to_internally_cured_concrete_mixtures https://www.researchgate.net/publication/241103356_absorption_and_desorption_properties_of_fine_lightweight_aggregate_for_application_to_internally_cured_concrete_mixtures https://www.researchgate.net/publication/241103356_absorption_and_desorption_properties_of_fine_lightweight_aggregate_for_application_to_internally_cured_concrete_mixtures


id: jemmme-7737
sid: 193
eid: 1
type: PERSON
entity:
  https://www.researchgate.net/publication/232397422_effect_of_expanded_perlite_on_the_mechanical_properties_and_thermal_conductivity_of_lightweight_concrete https://www.researchgate.net/publication/232397422_effect_of_expanded_perlite_on_the_mechanical_properties_and_thermal_conductivity_of_lightweight_concrete


id: jemmme-7737
sid: 198
eid: 2
type: ORG
entity:
  https://www.concrete.org/portals/0/files/pdf/previews/213r-14_preview.pdf https://www.concrete.org/portals/0/files/pdf/previews/213r-14_preview.pdf


id: jemmme-7737
sid: 201
eid: 1
type: EVENT
entity:
  https://www.researchgate.net/publication/285762399_effect_of_adding_sawdust_on_mechanical-physical_properties_of_ceramic_bricks_to_obtain_lightweight_building_material https://www.researchgate.net/publication/285762399_effect_of_adding_sawdust_on_mechanical-physical_properties_of_ceramic_bricks_to_obtain_lightweight_building_material https://www.researchgate.net/publication/285762399_effect_of_adding_sawdust_on_mechanical-physical_properties_of_ceramic_bricks_to_obtain_lightweight_building_material https://www.researchgate.net/publication/285762399_effect_of_adding_sawdust_on_mechanical-physical_properties_of_ceramic_bricks_to_obtain_lightweight_building_material


id: jemmme-13726
sid: 27
eid: 1
type: PERSON
entity:
  http://ejournal.umm.ac.id/index.php/jemmme mailto:akmalhanif02@gmail.com mailto:siti@umm.ac.id mailto:daryono@umm.ac.id jemmme


id: jemmme-12813
sid: 233
eid: 2
type: ORG
entity:
  https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewi4vlpnjcvxahulosskhr-vddoqfjaaegqibrad&url=https%3a%2f%2fir.library.oregonstate.edu%2fdownloads%2fgm80hw17p&usg=aovvaw0vhji5m3zw1pjjh4rspz-k https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahukewi4vlpnjcvxahulosskhr-vddoqfjaaegqibrad&url=https%3a%2f%2fir.library.oregonstate.edu%2fdownloads%2fgm80hw17p&usg=aovvaw0vhji5m3zw1pjjh4rspz-k https://www.researchgate.net/profile/janusz-steller/publication/273452336_flow_analysis_through_a_reaction_cross-flow_turbine/links/55028d9f0cf24cee39fc64c1/flow-analysis-through-a-reaction-cross-flow-turbine.pdf


id: jemmme-12813
sid: 311
eid: 1
type: PERSON
entity:
  https://doi.org/10.1299/jfst.3.398 https://doi.org/10.1155/2011/841214 https://doi.org/10.1016/j.proeng.2014.11.476


id: jemmme-12813
sid: 333
eid: 2
type: PRODUCT
entity:
  https://doi.org/10.1061/(asce)hy.1943-7900.0000977 http://www.pmt.usp.br/academic/martoran/notasmodelosgrad/ansys%20fluent%20theory%20guide%2015.pdf https://www.akademiabaru.com/doc/cfdlv11_n6_p86_96.pdf adanta1 chichkhede mockmore


id: jemmme-7982
sid: 199
eid: 1
type: PERSON
entity:
  https://www.researchgate.net/publication/228616843_aerodynamics_of_race_cars https://www.researchgate.net/publication/228616843_aerodynamics_of_race_cars


id: jemmme-7982
sid: 203
eid: 2
type: PERSON
entity:
  https://www.researchgate.net/publication/253651183_aerodynamic_noise_source_identification_for_a_coupe_passenger_car_by_numerical_method_focusing_on_the_effect_of_the_rear_spoiler https://www.researchgate.net/publication/253651183_aerodynamic_noise_source_identification_for_a_coupe_passenger_car_by_numerical_method_focusing_on_the_effect_of_the_rear_spoiler https://www.researchgate.net/publication/253651183_aerodynamic_noise_source_identification_for_a_coupe_passenger_car_by_numerical_method_focusing_on_the_effect_of_the_rear_spoiler


id: jemmme-7982
sid: 204
eid: 1
type: PERSON
entity:
  https://scholarcommons.scu.edu/cgi/viewcontent.cgi?article=1000&context=mech_mstr https://scholarcommons.scu.edu/cgi/viewcontent.cgi?article=1000&context=mech_mstr


id: jemmme-7982
sid: 204
eid: 2
type: PERSON
entity:
  https://www.researchgate.net/publication/319951181_cfd_analysis_of_passenger_vehicleat_various_angle_of_rear_end_spoiler https://www.researchgate.net/publication/319951181_cfd_analysis_of_passenger_vehicleat_various_angle_of_rear_end_spoiler jemmme


id: jemmme-17777
sid: 195
eid: 1
type: PERSON
entity:
  https://doi.org/10.1063/1.4943475 https://doi.org/10.5402/2012/982934 https://doi.org/10.1016/s1878-7959(09)00101-7 https://doi.org/10.21776/ub.jrm.2019.010.01.7


# pos

id: jemmme-5028
sid: 117
tid: 25
pos: PROPN
token:
  current%20flow%20limitation%20in%20a%20model%20of%20the%20hot%20leg%20of%20a%20pressurized%20water%20reactor.pdf

lemma:
  current%20flow%20limitation%20in%20a%20model%20of%20the%20hot%20leg%20of%20a%20pressurized%20water%20reactor.pdf


id: jemmme-5028
sid: 134
tid: 15
pos: NOUN
token:
  phase%20countercurrent%20flow%20in%20a%20model%20of%20a%20pressurized%20water%20reactor%20hot%20leg.pdf

lemma:
  phase%20countercurrent%20flow%20in%20a%20model%20of%20a%20pressurized%20water%20reactor%20hot%20leg.pdf


id: jemmme-10602
sid: 151
tid: 1
pos: ADJ
token:
  https://3dprintingindustry.com/news/industrial-manufacturing-desktop-new-moldlay-3d-printing-filament-42481/

lemma:
  https://3dprintingindustry.com/news/industrial-manufacturing-desktop-new-moldlay-3d-printing-filament-42481/


id: jemmme-8435
sid: 143
tid: 6
pos: VERB
token:
  https://www.researchgate.net/publication/323469792_non-rotating_shoulder_tool_for_friction_stir_welding

lemma:
  https://www.researchgate.net/publication/323469792_non-rotating_shoulder_tool_for_friction_stir_welde


id: jemmme-8222
sid: 168
tid: 9
pos: VERB
token:
  optimization%20of%20fused%20deposition%20modeling%20process%20parameters:%20a%20review%20of%20current%20research%20and%20future%20prospects

lemma:
  optimization%20of%20fused%20deposition%20modeling%20process%20parameters:%20a%20review%20of%20current%20research%20and%20future%20prospect


id: jemmme-8222
sid: 168
tid: 18
pos: VERB
token:
[cell repeats an earlier one in this file: 111 characters]

lemma:
  https://www.researchgate.net/publication/305027916_study_of_the_thermal_properties_of_filaments_for_3d_printe


id: jemmme-8222
sid: 168
tid: 25
pos: VERB
token:
[cell repeats an earlier one in this file: 153 characters]

lemma:
  https://www.researchgate.net/publication/313512331_effect_of_layer_thickness_deposition_angle_and_infill_on_maximum_flexural_force_in_fdm-built_specimen


id: jemmme-8222
sid: 168
tid: 37
pos: VERB
token:
[cell repeats an earlier one in this file: 132 characters]

lemma:
  https://www.researchgate.net/publication/308084011_effect_of_infill_parameters_on_tensile_mechanical_behavior_in_desktop_3d_printe


id: jemmme-8222
sid: 171
tid: 1
pos: VERB
token:
[cell repeats an earlier one in this file: 102 characters]

lemma:
  https://www.researchgate.net/publication/316530842_bond_and_part_strength_in_fused_deposition_modele


id: jemmme-7092
sid: 183
tid: 1
pos: NOUN
token:
  https://www.researchgate.net/publication/251608573_porosity_hydrogen_and_bifilm_content_in_al_alloy_castings

lemma:
  https://www.researchgate.net/publication/251608573_porosity_hydrogen_and_bifilm_content_in_al_alloy_casting


id: jemmme-7672
sid: 171
tid: 8
pos: NOUN
token:
[cell repeats an earlier one in this file: 103 characters]

lemma:
  https://www.researchgate.net/publication/245100477_actuator-disc_theory_for_vertical-axis_wind_turbine


id: jemmme-7672
sid: 172
tid: 1
pos: NOUN
token:
[cell repeats an earlier one in this file: 156 characters]

lemma:
  https://www.researchgate.net/publication/315363915_numerical_simulation_of_the_effect_of_axial_distance_between_two_rotors_in_counter-rotating_wind_turbine


id: jemmme-7672
sid: 184
tid: 5
pos: NOUN
token:
[cell repeats an earlier one in this file: 155 characters]

lemma:
  https://www.researchgate.net/publication/273382655_flow-driven_rotor_simulation_of_vertical_axis_tidal_turbines_a_comparison_of_helical_and_straight_blade


id: jemmme-7737
sid: 152
tid: 4
pos: NOUN
token:
[cell repeats an earlier one in this file: 193 characters]

lemma:
  https://www.researchgate.net/publication/236179591_effect_of_granulated_blast_furnace_slag_and_fly_ash_addition_on_the_strength_properties_of_lightweight_mortars_containing_waste_pet_aggregate


id: jemmme-7737
sid: 152
tid: 7
pos: NOUN
token:
  https://www.researchgate.net/publication/229315099_strength_and_elastic_properties_of_structural_lightweight_concretes

lemma:
  https://www.researchgate.net/publication/229315099_strength_and_elastic_properties_of_structural_lightweight_concrete


id: jemmme-7737
sid: 152
tid: 9
pos: VERB
token:
  https://www.researchgate.net/publication/24256456_the_applicability_of_different_waste_materials_for_the_production_of_light_weight_aggregates

lemma:
  https://www.researchgate.net/publication/24256456_the_applicability_of_different_waste_materials_for_the_production_of_light_weight_aggregate


id: jemmme-7737
sid: 152
tid: 20
pos: NOUN
token:
[cell repeats an earlier one in this file: 120 characters]

lemma:
  https://www.researchgate.net/publication/248541387_characteristics_of_lightweight_concrete_containing_mineral_admixture


id: jemmme-7737
sid: 191
tid: 2
pos: NOUN
token:
  https://www.researchgate.net/publication/257389193_thermal_conductivity_and_shrinkage_properties_of_modified_waste_polystyrene_aggregate_concretes

lemma:
  https://www.researchgate.net/publication/257389193_thermal_conductivity_and_shrinkage_properties_of_modified_waste_polystyrene_aggregate_concrete


id: jemmme-7737
sid: 191
tid: 7
pos: NOUN
token:
[cell repeats an earlier one in this file: 169 characters]

lemma:
  https://www.researchgate.net/publication/251621339_lightweight_concrete_incorporating_pumice_based_blended_cement_and_aggregate_mechanical_and_durability_characteristic


id: jemmme-7737
sid: 192
tid: 3
pos: NOUN
token:
[cell repeats an earlier one in this file: 171 characters]

lemma:
  https://www.researchgate.net/publication/241103356_absorption_and_desorption_properties_of_fine_lightweight_aggregate_for_application_to_internally_cured_concrete_mixture


id: jemmme-7737
sid: 193
tid: 3
pos: VERB
token:
[cell repeats an earlier one in this file: 166 characters]

lemma:
  https://www.researchgate.net/publication/257564366_engineering_properties_microstructure_and_strength_development_of_lightweight_concrete_containing_pumice_aggregate


id: jemmme-7737
sid: 198
tid: 7
pos: NOUN
token:
[cell repeats an earlier one in this file: 166 characters]

lemma:
  https://www.researchgate.net/publication/311735029_a_comparative_study_of_thermal_insulations_and_physical_properties_of_lightweight_concrete_using_some_raw_material


