JOURNAL OF THEORETICAL AND APPLIED MECHANICS 44, 1, pp. 51-73, Warsaw 2006 THE CLAMPED JOINTS – A SURVEY AND ANALYSIS OF SHAPES AND MATERIALS Janusz Juraszek Department of Mechanical Engineering Fundamentals, University of Bielsko-Biała e-mail: jjuraszek@ath.bielsko.pl The paper presents a surveyof available joints of the clamped type (CJ), which are of crucial importance in view of the design safety level. A numerical analysis has been carried out to estimate the efficiency of a given shape of the CJ. A digital database of material parameters most often employed in CJs has been presented as well. Key words: clamped joint; jaw shapes, FEM, stress-strain state 1. Applicability and analysis of clamped joints used in practice Clamped joints, which can be classified as permanent joints, are often used for connecting and fixing steel wire ropes, electric cables or hydraulic conduits. For example, in the power engineering, joints of that type are used for fixing and connecting different items; e.g., conductors, cables, elements of overhead transmission lines, etc. In aviation, they are used as an alternative way for making a control cable tip. Other examples can be found in cranes (lifting rope tip) and in hydraulic piping (joining of conduits). Another type of permanent joints connecting steelwire ropes consists infillinga jointwitha low meltingalloy,which is,however, avery laborious, expensiveandtoxic (leadand zinc vapours) process. Moreover, it cannot be used in all the aforementioned cases. On the other hand, it should be mentioned that temporary joints reveal also some substantial disadvantages, e.g., complex design, large dimensions and mass, which considerably rises costs of making such joints. The method of clamping is relatively inexpensive, requires little work, and its broad ap- plicability covers also outdoor cases. The main advantage of clamped joints consists in its small size. A hexagonal clamped joint can be considered as a 52 J.Juraszek typical example of such a joint [5]. Themain idea of fastening consists here in changing the initial circular shape of a sleeve into a hexagon inscribed in that circle (Fig.1). The process of clamping is performed using two clamping jaws. The surface of the jaw contact determines the joint parting plane, which is its plane of symmetry as well. In power engineering applications (Fig.2), the Al-Fe (aluminium and steel) conductor tip after being inserted into a sleeve is clamped due to transversal plastic deformation of the sleeve. The joint opera- tion is two-fold, i.e. besides doing a mechanical work (i.e. carrying a load) it operates also as a conductor so that the electric circle is not broken. Thema- terial of the clamping sleeve should reveal good conducting properties, usually the sleeve is made of aluminiumA0. Fig. 1. Rope clamped ”into a hexagon” Fig. 2. Exemplary joints used in power engineering systems The clamped joints – a survey... 53 There are also other forms of clamping jaws available, e.g., octagon, do- decagon, ellipsis, modified ellipsis, circle (one parting plane), modified circle, axi-symmetric forms, etc. Some papers devoted to that problem can be fo- und in the literature as well. Themost interesting publicationa are presented below. The distribution of pressure in the course of a clamping process in not a uniform one. The way of axi-symmetric clamping proposed in Juraszek (1995, 1997, 1999, 2000, 2004) eliminated noticeably that non-uniformity re- vealed by the pressure distribution. That approach, however, requires ap- plication of a special hydraulic power press of a complex design, and the clamping process should be carried out at a laboratory or a suitable factory department. Another research that should be mentioned here consists in inventing a newmethod for mounting wires for temperaturemeasurement in an oily seed silo, based on mounting them into a self-clamping cone. The wires break off along the radius of the inner hole-to-cone segment. The application of the axi- symmetric way of clamping allowed for elimination of the wire breaking off whichmade both the design andmounting much simpler. Basing on the aforementioned examples, one can arrive at the conclusion that clamped joints exert decisive influence upon a safety level and reliability of structures they are applied to (fixing of lifting ropes in cranes, overhead transmission line supports, electric cables, etc.). A proper qualitative strength analysis may result in improving the safety and allowing for a proper choice of joint parameters. Each clamped joint comprises the following two elements: 1) rope, cable or a hydraulic conduit 2) clamping sleeve. Steel wire ropes, electric cables and hydraulic hoses should meet require- ments specified in relevant standards, while their properties are presented in Juraszek (1992). Molnar et al. (Maligda et al., 2000; Molnar, 2004; Stanova and Molnar, 2003) presented a problem of 3D modelling of ropes. A clam- ping sleeve made of a plastic material is the second element of the joint. The sleeve material deforms plastically when subject to an external pressure, and after unloading the residual stresses remain on the sleeve-rope contact sur- face. When modelling the phenomena appearing in the clamped joint, values of material parameters introduced into the model after exceeding the yield point are of crucial importance. The values of parameters available from the literature differ substantially from those measured for a given material at its 54 J.Juraszek working point or within the expected loading range. To make the calcula- tions more accurate, the Digital Database of Material Parameters has been proposed. Most interesting research works on the contact problems between a wire rope and foundation was presented by Dorfmann et al. (1999). The authors carried out a numerical analysis and experimental investigations on the con- tact between a rope and a rubber-aluminium wheel. Numerical simulations were performed using the AbaQus code, with the phenomenon of wheel he- ating introduced into the model, which, however, presented only a simplified external contour instead of the real wires. Kliber (2000) carried out numerical analyses of large plastic deformations with the phenomenon of linear strain hardening included. Buczkowski and Kleiber (1992) examined models with friction introduced into elastic-plastic problems. The model of contact should be specified before analysing the process of clamping of a wire rope. Altenbach (1991) presented an incremental method for contact description in 2D models, while Hrycaj et al. (1999) showed an elastic plasticmodelwith theCoulomb friction introduced. Among the papers devoted to clamped joints, one should mention the analysis of clamping into a hexagon (Juraszek, 1994), research onmulti-clip joints (Juraszek, 2004) and a study on the equivalent transversal stiffness of a steel wire rope and steel- aluminium cables (Juraszek, 1992, 1995). Problems of large deformations in plastic forming were analysed by Mac- DonaldandHashmi (2002) using theANSYScode.Landreet al. (2003) presen- ted a discussion of FEMmesh changes during upset forgingwith theCockroft- Latamcriterion taken into consideration. Provatidis (2003) showedan interpo- lation of theCoon type applied to an axi-symmetrical problem, which allowed for making the calculation timemuch shorter for non-linear problems of large deformations. Most often, joint designs result from the experience gained by different manufacturers (Juraszek, 1997). A survey of designs available reveals the lack of a consistent main idea laying behind the joint design. Moreover, one sho- uld mention the lack of data on strength calculations, designing and appro- priate selections of rope fastenings (connections between elements that reveal substantially different stiffnesses). The investigations are being conducted by scientific centres associated withmanufacturing companies and, consequently, market competition prevents publication of the results. A survey of materials used in clamped joints, having a systematic form of the Digital Database has beenpresented hereinafter, togetherwith the discussion on shapes of clamping jaw, taking into consideration the twisting of jaes about rope wires. The clamped joints – a survey... 55 2. Digital Database (DD) of material parameters used in calculations of clamped joints 2.1. Introduction Materials used in clamped joints reveal a great variety of physical para- meters. In the case of steel wire ropes, the sleeve is made of a high-plasticity steel, while electric cables should be clamped with sleeves made of the alumi- nium A0 or other aluminium alloys. The process of clamping involves large plastic deformations. Therefore, one of the crucial phases of the clamped joint modelling consists in a detailed analysis of characteristics of the materials to be joined, focusing on the material parameters beyond the yield point. A new systematic approach has been proposed allowing for a consistent presentation of material parameters that can be applied to joints, providing at the same time a way of producing digital forms of material characteristics. Differentmodels of amaterial canbe constructed aswell, bymeans of a special program the database is supplied with. The possibility has also been offered to find necessary parameters for analysis of a non-linear material. Nowadays, some databases are available: • created by theCentre of Excellence for Safety-Critical Pressure Systems (www.ippt.gov.pl/centrum-cdsc/baza); it contains only characteristics of materials usedwhen constructing pressure vessels, providing however no discussion of material properties beyond the yield point; • established by the Centre for Advanced Materials and Technologies – a catalogue of newmaterials; • very large database www.matweb.com; • database of parameters www.suppliersoline.com and • database of material properties depending on temperature www.jam.software.inc. Unfortunately, they do not provide any data allowing for precise determina- tion of the properties of materials used in clamped joints, especially beyond the yield point. There are only standard material characteristics available; providing values of Re,Rm,A5,A10,E andhardeningmodulus, without any specification of the strain range forwhich they have been determined.There is a lack of accurate data on the strain-hardening coefficient at an arbitrary po- int of the characteristics. Typical material catalogues (e.g. Dobrzański, 2001) concentrate on a chemical constitution and the aforementioned standard pa- rameters. Bures and Kohutek (2000) presented constructional possibilities of 56 J.Juraszek material databases using the Internet. A new solution to the problem has be- en proposed based on the enormous capabilities offered bymodern, advanced experimental equipment that satisfies the needs for data necessary to carry out a non-linear numerical analysis using FEM. The research scope covered allmaterials used in clamped joints, which can be classified into several groups depending on their application: • Low-carbon plastic steels, e.g. steel of 10 grade – clamping sleeve • High-carbon steels, assisting sleeve in hydraulic joints • Aluminium and its alloys, e.g. aluminiumA0 – clamping sleeve working as conductor in electric joints • Wires of ropes • Wires of electric cables • Hoses in hydraulic systems – elastomers and polymers • Superplastic materials like NITINOL. The values of characteristic parameters of materials used in joints of that type differ fundamentally, e.g., the value of Young’smodulus varies within the range from 2MPa (elastomers) to 210000MPa (steels). A new database has been proposed for material parameters necessary in numerical investigations on clamped joints. To the best author’s knowledge, the approach put forward has not been taken before. It allows for automatic data collecting from experiments performed using the general-purpose testing machine INSTRONaswell as fordataprocessing to arrive at the formrequired by the FEM approach. The numerical analysis is carried out basing on true values of the tangentialmodulusdetermined for a given load. Suchanapproach improves accuracy of numerical calculations, assuming at the same time the role of pre-processor of material parameters necessary for analysis of plastic deformation problems. The database proposed allows for a proper material choice for new types of joints, improving that way their safety. Capabilities of modern computer techniques enable application of values of parameters stored in the database to the analysis carried out basing on non-linear physical relationships. Therefore, one can now attempt at a numerical analysis based on true properties of a material determined within the whole expected loading range. It should be noted, however, that the values resulting from experiments differ substantially from those presented in the literature. A special computer program has been developed, which: • downloads resultsof strength testing fromthe INSTRONmachine,which could have been interpreted only by the machine software; The clamped joints – a survey... 57 • processes these results to arrive at the form allowing for data transfer to the FEM code; • determines parameters necessary for the non-linear analysis. 2.2. Models of materials available in the DD base The DD database offers a special computer program that allows for pro- ducing a series ofmodels of materials that can be used in the non-linear FEM analysis. The applied simplifying approach most often consists in neglecting ”the plasticity platform” and substituting a segment of constant inclination for an exponential hardening. The model obtained that way is called biline- ar and comprises two segments of different angles of inclination. The tangent of the inclination angle the first segment makes with the axis ε represents Young’smodulus (elastic range), while the second segment represents the pla- stic range determined by the hardening modulus E′. The common point of both segments represents the elastic limit Re. Fig. 3. Bilinear andmulti-linear models of the consideredmaterial To attain higher calculation accuracy in the elastic-plastic analysis, one can represent the true stress-strain curve using more segments, e.g. with a broken line comprising 5 segments. Such a model is called multi-linear. The provided computer program allows also for developing models having form of an exponential curve or a polynomial. When designing clamped joints for hydraulic conduits, a hose made of an elastomer (often reinforced) fitted into a socket is the element to be clamped. In the case of steel-rubber ropes, the space amongwires is filledwith a special mixture of elastomers.Material properties of the elastomer are represented by the hyper-elastic Mooney-Rivlin model. When modelling bodies made of rubber or other materials revealing non- linear elasticity and incompressibility, one should apply hyper-elastic models 58 J.Juraszek Fig. 4. Hyper-elasticMooney-Rivlin model to analysis carried out within the range of large deformations. Practically, the following two approaches to the problem are incorporated most commonly. The first one consists in the interpolation of stress components separately, while in the second one the apparent compressibility is introduced together with a relationship limiting the number of unknown degrees of freedom in the global stiffness matrix. The Mooney-Rivlin equation has been employed for describing properties of elastomers σ=2C1(α−α −2)+2C2(1−α −) where σ – normal stress C1,C2 – Mooney’s constants α – l/l0 deformation. The constant C1 assumes values within the range 0.05-0.2MPa rising as the vulcanisation level rises, while the constant C2 depends on the rubber hardness (0.05-0.1MPa). After calculating thederivative of theMooney-Rivlin equationwith respect to ε, one arrives at a formula for the equivalent modulus Ez Ez = dσ dα ∣ ∣ ∣ α=1 =4C1+6C2 Values of C1 and C2 are automatically determinedby importing theprocessed table of σ−εdata (resulting fromthe compression curve) to theANSYScode, and then using theMoon function. Anothergroupofmaterials used in clamped joints comprises shapememory alloys. Figure 5 shows exemplary characteristics of Nitinol. Models of shapememorymaterials were presented byTanaka et al. (1986), whileAuricchio (2001), Brinson (1993), Jung et al. (2002) showedmodelswith thermodynamic effects included. The clamped joints – a survey... 59 Fig. 5. Nitinol characteristics with phase transitions taken into consideration The constitutive model (pseudoelastic, bilinear) bases on the directional strain components that have been determined. The model is based upon the double trigger line concept, according towhich the gradient of the stress–strain curve depends on the sign of the deformation speed CZ =            E1(εz, ε̇z,τz)∈ΩA(T) E2(εz, ε̇z,τz)∈ΩAM(T) E3εz, ε̇z,τz)∈ΩM(T) E4(εz, ε̇z,τz)∈ΩMA(T) where εz denotes the strain and the dot above it – the strain speed. Fig. 6. Nitral characteristics – 7% deformations Figure 6 presents characteristics found from experiments with a characte- ristic loop due to phase transitions involved by a temperature drop down to 183◦C, when deformations reach 7%. 60 J.Juraszek 2.3. Description of the computer program The program ”Digital database of material parameters” has been deve- loped to improve the accuracy of FEM numerical calculations. At the same time, it allows for: • application of true material characteristics; • determination of the Youngmodulus at an arbitrary point of the stress- strain curve in tension or compression; • linear interpolation of the stress-strain curve in tension or compression in terms of a broken line passing through 5 points; • using the exponential or polynomial model. A samplewindowof the program is shown inFig.7. There is a stress-strain curve visible on the screen together with values of deformation (column X) and the corresponding force (column Y ) basing on which the diagram was generated. The user can scale the display up or down, delete the picture or store it in a hard disc (see Fig.7). Fig. 7. A view of the computer screen after rolling in the data (in Polish) Theprogramproposed allows for determination of theYoungmodulus (i.e. themodulus representedby the tangent to a givenpoint of thediagram,within the non-linear range of course) at every chosen point within themeasurement range. Additionally, for a given range, one can determine the so-called secant modulus (i.e. represented by the secant to a given point of the diagramwithin the non-linear range).When indicating anarbitrarypoint on thediagramwith amouse cursor, the user candetermine theYoungmodulus.For the purpose of The clamped joints – a survey... 61 storingdiagrams in computermemoryaswell as disseminating the information via the Internet, a special module was developed for storing the items in the form of GIF image files with their quality being maintained. Fig. 8. Sample diagrams saved using the graphics module When making measurements using the INSTRON machine, one obtains results in the form of a file, which, up till now, could have been interpreted only by thatmachine. Clicking on the ”Converter” dropdown list box one can roll in such a file, browse or convert it, i.e. store in the form of a common text file containing two data columns necessary for generation of the stress-strain curve. The aforementioned database provides also a model allowing for rolling in the data registered by the specific software of the general-purpose testing machine INSTRON, and for processing files containing measurement results into the form required by theANSYS code.Material parameters necessary for non-linear analysis are determined as well, depending on the adopted model of the consideredmaterial. It is obvious that the program is user-friendly. The databasepresentedallowsalso for storingandcomparingbetween the results of other experiments. The possibility of introducing truematerial characteristics and taking the expected loading range into account improves the accuracy of numerical calculations. 3. Theoretical background The present research aims at the analysis of the stress-state in clamped joints with clamping sleeves of different shapes. The following assumptions have been accepted: 62 J.Juraszek • the clamping process is quasi-static; • the plane model is employed with the joint width neglected; • twisted steel lines of the T1x7 type are considered which implies that that a relatively long length of lay twisting of the rope strands can be neglected; • three-node Contac48 elements represent the contact zone between the sleeve and rope; • kinematic hardening of the material is introduced into the model. The theoretical background of themethod is presentedbelow.The changes inmaterial parameters in the course of the deformation process are taken into account. TheAmont-Coulomb frictonmodel is introduced into the sleeve-rope contact area. The clamping process is assumedas a quasi-static one. TheFEM approach assists the analysis of plastic deformation problems. The equation of equilibrium for amedium can be derived from the virtual workprinciple (Kleiber, 1984). In the case of a general Lagrange’s formulation, we have ∫ V Sijδεij dV =R (3.1) where Sij – component of the second Piola-Kirchoff stress tensor εij – component of the Green-Lagrange strain tensor. Thework done by the external forces R can be represented in terms of the surface and volume works, respectively R= ∫ A pδUk da+ ∫ V fδUk dV (3.2) The above equation has been derived on the assumption that the body configuration changes from one loading step to another. In Eq. (3.2), the symbols A and V stand for the surface and volume, of the body, respectively, while p and f represent components of the vectors of surface and volume forces acting upon a unit surface and unit volume of the body corresponding to the initial configuration. δUk represents the displace- ment variation while δteij stand for the strain variations δkeij = δ 1 2 (kUi,j + kUj,i) (3.3) The clamped joints – a survey... 63 The above equation in the FEM approach can be rewritten in the following discrete matrix form k K k U = k+1R− kF (3.4) One can arrive at Eq. (3.4) after substituting the following matrix forms for the integrands ∫ V 0 kσijδeij dV 0 = 0 ∫ V B > L k Σ dV 0 = kF (3.5) ( 0 ∫ V B > LDBL dV 0 ) k U = kKkU The following denotation is used in Eqs (3.4) and (3.5): k K – tangential stiffness matrix at the loading step k k U – vector of node displacement increments at the loading step k k+1 R – incremental vector of nodal loads at the loading step k+1 k F – vector of nodal correcting forces at the loading step k BL – so-called ”geometric” matrix relating strains to displace- ments D – matrix of material properties (tangential matrix) k Σ – vector of current stresses (at the step k). The term ”step” throughout the considerations means subsequent incre- mental loading steps. 4. Modelling of the process of clamping and unloading with the shape of clamping jaws taken into consideration Ashas beenmentioned above, the choice of type of clamped joints is usual- lymade basing onmanufacturers’ experience. Themain issue to be considered here consists in the analysis of clamping andunloading processes, respectively, in theway allowing for proper assessment of states of displacements anddefor- mations together with the stress state depending on the type of clamping jaws employed. A one-plane hinged jaw of a hexagonal shape inscribed in a circle is most commonly used. Such a jaw is very simple in use, and the clamping process can be performed with a small flash of the clamped material. On the 64 J.Juraszek opposite end of the application list, an axi-symmetrical jaw is located, being used hardly ever. First to propose it for clamping of a twisted steel lines was Juraszek (2000). For the axi-symmetrical clamping process to be performed, four parting planes should be introduced and turned about 45 degrees relative to each other, which highly complicates the clamping process. The used hy- draulic systems prevent from simultaneous translation of the jaws. Therefore, a mechanical system driving the translations of all jaws in a controlled way combined with hydraulically driven motion were introduced which enabled proper realisation of the axi- symmetrical clamping process. This approach reveals very high complexity in view of the process technology. It should be noted, however, that besides the two aforementioned ”extreme” types of jaws, there are several other shapes available: • Octagonal • Octagonal-twisted • Dodecagonal • Dodecagonal-twisted • Elliptic • Modified elliptic • Circular (one parting plane) • Modified circular • Of a special shape. In the last case, roughly speaking, clamping jawshave a shape of a polygon inscribed ina circle or ellipsis. Themain advantage of this type of jaws consists in shaping its contours in theway ensuring additional displacements or proper metal forming of the sleeve internal surface. All the aforementioned types of clamping jaws have been analysed. The presented jaws comprise all types used in practice as well as several newly proposed. Some possibilities of their modifications are shown as well. The clamped elementwas the ropeT1X7 – a very difficult one to bedealtwith in such joints. A parametric model was produced allowing for introduction of the ropewire diameterwith the corresponding external diameter. Table 1 lists exemplary geometrical parameters of the rope. Both the internal and external diameters are automatically chosen basing on the condition that the requ- ired tensile strength should be equal to the tensile strength of the considered rope. The clamped joints – a survey... 65 Table 1. Exemplary normalised diameters of the rope (r) and wire (w) [mm] r w r w 0.63 0.2 3.6 1.2 0.7 0.22 4.0 1.3 0.8 0.26 4.5 1.5 0.9 0.3 5.0 1.6 1.0 0.33 5.5 1.8 1.1 0.36 6.3 2.0 1.2 0.4 7.0 2.2 1.4 0.45 8.0 2.6 1.6 0.52 9.0 3.0 1.8 0.6 10.0 3.2 2.0 0.65 12.0 4.0 2.2 0.7 15.0 4.7 2.5 0.8 18.0 6.0 2.8 0.9 3.2 1.0 Each of the presented jaws has at least two parting planes (Fig.9a) that are, at the same time, two axes of symmetry. Basing on the symmetry of the system, one can take into consideration only 1/4 of the clamped joint model (Fig.9b). To arrive at the results for the whole joint – those obtained for one quarter were mapped with respect to the corresponding axes. That allowed for shortening of the calculation time by 83% and reduction of the resulting file size by 68%. Fig. 9. (a) Symmetry axes of the model; (b) symmetry introduced into the model and boundary conditions 66 J.Juraszek In the first part of calculations (analysis of clamping) the jaw comes closer to the element to be clamped at a very low speed, i.e. the process can be considered as a quasi-static one. In practice, the jaws are pressed against each other until they come into contact. In the presented scheme, this stage of the process is denoted as ”translation”. At this stage, the initial circular shape of the clamping sleeve changes into the shape determined by the clamping jaws. The boundary conditions, based on the assumption of symmetry with respect to the axes x and y aremarked as well. The next stage of the process consists in unloading the joint through taking the jaws away down to their initial posi- tion. The process is performed according to the unloading curve and requires a high number of unloading steps. After completing the unloading process, some stresses still remain in the material. They are known in the literature as the residual stresses. These stresses, as it has been many times proved by the author basing on his investigation results, determine the joint carrying capacity. The carrying capacity means here the maximum force acting upon the joint that does not cause the rope or cable to slip out of the clamping sle- eve.Magnitudes and distributions of residual stresses, a part from offering the possibility ofmonitoring the deformation process, provide also very important information about the process efficiency. Figures 10a,b show exemplary octa- gonal and dodecagonal jaws. The jaw is twisted about rope wires to achieve themost suitable jaw-sleeve-rope configuration that ensures largermagnitudes of residual stresses after unloading. The effect is most profitable in the case of the dodecagonal-twisted jaw. Fig. 10. (a) Octagonal jaw; (b) octagonal-twisted jaw Some simulation results of the processes of clamping and unloading for a circular jaw within the residual stress range are shown in Fig.11 and Fig.12. During the clamping process, the material effort of the clamping sleeve re- aches the magnitude of 300MPa, while within the sleeve-rope contact zone it attains 500MPa. The residual stresses remain after unloading due to dif- ferent deformability of the joint elements and different material parameters. The clamped joints – a survey... 67 Fig. 11. Residual stresses – the process of clamping Fig. 12. Residual stresses – the process of unloading 68 J.Juraszek Themagnitudes of residual stresses within the contact zone take valueswithin the range from 150 to 250MPa. In view of the carrying capacity of the joint, distributions of stresses and deformations over the rope-sleeve contact zone play the most important role. To carry out the analysis within this area, mesh nodes were suitably selected. Results are presented in the form of circle diagrams. Figure 13 presents nodal displacements in the courses of clamping and unloading a dodecagonal jaw. The lateral planes of jaws togetherwith their parting planes are clearly visible. Fig. 13. Nodal displacements in the rope-sleeve contact zone during clamping (black) and unloading (grey) The clamping efficiency of joints clamped by octagonal and dodecagonal jaws was compared in terms of the reduced residual stress (unloading) that determines the joint carrying capacity (see ”- - -” lines in Fig.14). The effi- ciency was determined by the area below the diagram or the mean value of the reduced residual stress. For the dodecagonal joint, the mean value was 157MPa, while in the case of elliptic one – 57MPa, therefore the difference between stressmagnitudes reached 100MPa.The dodecagonal jaw allowed for increasing magnitudes of the residual stresses within the contact zone almost three times. Then, a comparison between the dodecagonal jaw twisted by 12.5 degrees about the axis and the elliptic jaw was made. Figure 16 presents a complete survey of the efficiency of the analysed jaws. The efficiency of joint forming means here the magnitude of reduced residual stress. From this figure, it can be clearly seen that higher values appeare for dodecagonal-twisted, elliptic and circular joints. It is obvious that most uniform stress distributions can be observed in axi-symmetrical joints. Due to technological aspects of the clam- ping process, hexagonal joints are employedmost commonly. The efficiency is comparable with that revealed by octagonal joints. The clamped joints – a survey... 69 Fig. 14. Reduced residual stress in the dodecagonal clamped joint Fig. 15. Reduced residual stress in the dodecagonal and elliptic clamped joint during unloading The obtained results have been experimentally verified using the diffraction-based ”sin2(gamma)”method for stress statemeasurements at cho- sen points of the joint. The diffraction instrumentD-8 Advancemade byBro- ker was used for measuring the stress tensor components within the contact zone. For example, the radial stress component of 228MPa was measured for the axi-symmetrical joint, which agreed perfectly with the simulation results. This new magnetic-memory method, invented by prof. A. Dubov, was veri- 70 J.Juraszek Fig. 16. Comparison of the clamping efficiency in the considered jaws fied as well. The main advantage of this method consists in the possibility of making measurements both during the clamping and unloading process. The method is based on the fact that the diffraction of magnetic field depends on the stress distribution in the sleeve. The resulting cross-sectional distributions of the magnetic field agreed with the stress distributions. 5. Conclusions • The presented analysis allows for comparison of clamped jointsmade by making use of clamping jaws of different shapes. • Most of the uniform reduced residual stress distribution (according to the Huber-Mises-Huncky hypothesis) is achieved in the case of axi- symmetrical joints, the shape of which is closest to a dodecagon. In this respect, the octagonal jaw yields most disadvantageous results, which however can be improved by means of turning the jaw about the rope axis by 12.5 degrees. The clamped joints – a survey... 71 • Higher stresses appear in the course of clamping – after release of the jaw the internal (residual) stresses take much lower values. • The special-shape jaw brings about a relatively uniform stress distribu- tion along the internal sleeve edge. The main advantage consists in the largest sleeve-rope contact zone when compared to other shapes of jaws. This influences strongly themaximum force carried by the joint. On the other hand, it reveals some disadvantages as well – very large deforma- tion of the external surface and very complex shape difficult to follow in a manufacturing process. • The proposed data base ofmaterial parameters allows for improving the accuracy of numerical calculations. • The presented modelling methodology of clamped joints allows for new designs as well as for improving the existing ones. References 1. Altenbach J., Buczkowski R., 1991, Inkrementelle Finite-ElementeModel- lierung des 2D-Kontaktproblems,Technische Mechanik, 12, 93-106 2. Auricchio F., 2001, Three-dimensionalmodeling of shape-memorymaterials, J. Phys., IV, 11 3. Brinson L., 1993, One dimensional constitutive behavior of shape memory alloys, J. Intel. Mater. Syst. Struct., 4, 229-242 4. Buczkowski R., Kleiber M., 1992, Finite element analysis of elastic-plastic plane contact problemwith nonlinear interface compliance, Journal of Theore- tical and Applied Mechanics, 30, 4 5. Bures R., Kohutek J., 2000, IntenetoveMaterialowe Data Bazy, 9th Inter- national Metallurgical Conference, METAL 2000 6. Dobrzański L.A., 2001, Zasady doboru materiałów inżynierskich z kartami charakterystyk, Wyd.II,Wydawnictwo Politechniiki Śląskiej 7. Dorfmann A., Pabst O., Beh R., 1999, Combined numerical and expe- rimental analysis of the mechanical and thermal stress distribution in rubber- aluminiumroll,The 8TH International Congress forTransport byRopeOITAF, San Francisco 8. Elektroenergetyczne linie napowietrzne, Elbud Kraków 1980 72 J.Juraszek 9. Hrycaj P., Cescotto S., Oudin J., 1999, Elasto-plastic finite element ana- lysis of unilateral contact with generalized Columb friction,Engineering Com- putations, 8, 291-303 10. Jung Y., Papadopoulos P., Ritchie R., 2002, Constitutive modelling and numerical simulation on multivariant phase transformation in superelastic al- loys, Int. J. Num. Meth. Engin. 11. Juraszek J., 1992, Zastępcza sztyność poprzeczna lin stalowych i przewodów aluminiowo-stalowych, Zeszyty Naukowe Poliechniki Łódzkiej Filii w Bielsku- Białej, 9, 53-62 12. Juraszek J., 1994,Analysis of the hexagonal clasp-joint – plastizitat,GAMM, 5.7, p.78 TUBraunschweig 13. Juraszek J., 1995, Modeling of steel ropes and steel-aluminium wires with substitute crosswise stiffness, International Congress on Industrial and Applied Mathematics ICIAM’95, Hamburg 14. Juraszek J., 1997, Elasto-plastic analysis of the wire, GAMM, 7, Computa- tional Mechanics, p.48, TURegensburg 15. Juraszek J., 1999,Elasto-plastic analysis of the clasping process,Gesellschaft für Angewandte Mathematik und Mechanik, GAMM’99, Metz 16. Juraszek J., 2000, Analysis of steel wire clamp by FEM, XI International Wire Conference 17. Juraszek J., 2004, Method of analysis of wire clasp joint, The International Journal of Transport and Logistics, 6 18. Kleiber M., 1984, Metoda elementów skończonych w nieliniowej mechanice kontinuum, PWN,Warszawa 19. Kliber J., 2000, Theoretical and technological aspects of rails rolling, 9th International Met. Conference Metal, Ostrava 20. Landre J., Pertence A., Cetlin P.R., Rodrigues J.M.C., Martins P.A.F., 2003, On the utilisation of ductile fracture criteria in cold forging, Finite Elements in Analysis and Desing, 39, 3 21. MacDonald B.J., Hashmi M.S.J., 2002, Shape desing sensitivity analysis and optimization of general plane arch structures, Finite Element in Analysis and Desing, 39, 2, 137-1653 22. Maligda J., StanovaE.,DanciM., 2000,Geometrical dresing of steel cable using optima strands of circular cross section, Transactions of the Universites of Kosice, 2 23. Molnar V., 2004, Computer utilization for desing of the rope constructions andtheir strainmodeling,The International Journal of Transport andLogistics, 6 The clamped joints – a survey... 73 24. Provatidis C.G., 2003, Analysis of axisymmetric structures using Coon’s in- terpolation, Finite Element in Analysis and Desing, 39, 5/6, 535-558 25. Stanova E., Molnar V., 2003, The steel rope and the possibilities of its mathematical modeling,Transactions of the Uniwersities of Kosice, 3 26. TanakaK., Kobazashi S., Sato Z., 1986, Thermomechanics of transforma- tion pseudoelasticity and shapememory effect In alloys, Int. J. of Plasticity, 2, 59-72 Złącza zaciskowe – przegląd i analiza ich kształtów oraz stosowanych materiałów Streszczenie Wpracydokonanoprzeglądu stosowanychzłącz zaciskowych.Złączamają istotny wpływ na poziom bezpieczeństwa całej konstrukcji. Przeprowadzono analizę nume- ryczną oceniającą efektywność stosowanych kształtów połączeń zaciskanych. Zapre- zentowano cyfrową bazę danych parametrówmateriałowych stosowanych do budowy złącz zaciskanych. Manuscript received March 29, 2005; accepted for print April 19, 2005